third_party/nlassert/repo/Makefile.in

   1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 #
  18 #    Copyright 2015-2018 Nest Labs Inc. All Rights Reserved.
  19 #
  20 #    Licensed under the Apache License, Version 2.0 (the "License");
  21 #    you may not use this file except in compliance with the License.
  22 #    You may obtain a copy of the License at
  23 #
  24 #    http://www.apache.org/licenses/LICENSE-2.0
  25 #
  26 #    Unless required by applicable law or agreed to in writing, software
  27 #    distributed under the License is distributed on an "AS IS" BASIS,
  28 #    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  29 #    See the License for the specific language governing permissions and
  30 #    limitations under the License.
  31 #
  32
  33 #
  34 #    Description:
  35 #      This file is the GNU automake template for the Nest Labs
  36 #      runtime assertion library.
  37 #
  38
  39 VPATH = @srcdir@
  40 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  41 am__make_running_with_option = \
  42   case $${target_option-} in \
  43       ?) ;; \
  44       *) echo "am__make_running_with_option: internal error: invalid" \
  45               "target option '$${target_option-}' specified" >&2; \
  46          exit 1;; \
  47   esac; \
  48   has_opt=no; \
  49   sane_makeflags=$$MAKEFLAGS; \
  50   if $(am__is_gnu_make); then \
  51     sane_makeflags=$$MFLAGS; \
  52   else \
  53     case $$MAKEFLAGS in \
  54       *\\[\ \   ]*) \
  55         bs=\\; \
  56         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  57           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  58     esac; \
  59   fi; \
  60   skip_next=no; \
  61   strip_trailopt () \
  62   { \
  63     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  64   }; \
  65   for flg in $$sane_makeflags; do \
  66     test $$skip_next = yes && { skip_next=no; continue; }; \
  67     case $$flg in \
  68       *=*|--*) continue;; \
  69         -*I) strip_trailopt 'I'; skip_next=yes;; \
  70       -*I?*) strip_trailopt 'I';; \
  71         -*O) strip_trailopt 'O'; skip_next=yes;; \
  72       -*O?*) strip_trailopt 'O';; \
  73         -*l) strip_trailopt 'l'; skip_next=yes;; \
  74       -*l?*) strip_trailopt 'l';; \
  75       -[dEDm]) skip_next=yes;; \
  76       -[JT]) skip_next=yes;; \
  77     esac; \
  78     case $$flg in \
  79       *$$target_option*) has_opt=yes; break;; \
  80     esac; \
  81   done; \
  82   test $$has_opt = yes
  83 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  84 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  85 pkgdatadir = $(datadir)/@PACKAGE@
  86 pkgincludedir = $(includedir)/@PACKAGE@
  87 pkglibdir = $(libdir)/@PACKAGE@
  88 pkglibexecdir = $(libexecdir)/@PACKAGE@
  89 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  90 install_sh_DATA = $(install_sh) -c -m 644
  91 install_sh_PROGRAM = $(install_sh) -c
  92 install_sh_SCRIPT = $(install_sh) -c
  93 INSTALL_HEADER = $(INSTALL_DATA)
  94 transform = $(program_transform_name)
  95 NORMAL_INSTALL = :
  96 PRE_INSTALL = :
  97 POST_INSTALL = :
  98 NORMAL_UNINSTALL = :
  99 PRE_UNINSTALL = :
 100 POST_UNINSTALL = :
 101 build_triplet = @build@
 102 host_triplet = @host@
 103 target_triplet = @target@
 104 subdir = .
 105 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
 106         $(top_srcdir)/configure $(am__configure_deps) \
 107         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs \
 108         $(dist_doc_DATA) \
 109         third_party/nlbuild-autotools/repo/third_party/autoconf/ar-lib \
 110         third_party/nlbuild-autotools/repo/third_party/autoconf/compile \
 111         third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess \
 112         third_party/nlbuild-autotools/repo/third_party/autoconf/config.sub \
 113         third_party/nlbuild-autotools/repo/third_party/autoconf/depcomp \
 114         third_party/nlbuild-autotools/repo/third_party/autoconf/install-sh \
 115         third_party/nlbuild-autotools/repo/third_party/autoconf/missing \
 116         third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs \
 117         third_party/nlbuild-autotools/repo/third_party/autoconf/py-compile \
 118         third_party/nlbuild-autotools/repo/third_party/autoconf/ltmain.sh \
 119         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/compile \
 120         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.guess \
 121         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/config.sub \
 122         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/install-sh \
 123         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/ltmain.sh \
 124         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/missing
 125 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 126 am__aclocal_m4_deps = $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/ax_check_compiler.m4 \
 127         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/ax_check_preprocessor.m4 \
 128         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_coverage.m4 \
 129         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_coverage_reporting.m4 \
 130         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_debug.m4 \
 131         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_docs.m4 \
 132         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_optimization.m4 \
 133         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_enable_tests.m4 \
 134         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_filtered_canonical.m4 \
 135         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_werror.m4 \
 136         $(top_srcdir)/third_party/nlbuild-autotools/repo/autoconf/m4/nl_with_package.m4 \
 137         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/libtool.m4 \
 138         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltoptions.m4 \
 139         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltsugar.m4 \
 140         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/ltversion.m4 \
 141         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/m4/lt~obsolete.m4 \
 142         $(top_srcdir)/configure.ac
 143 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 144         $(ACLOCAL_M4)
 145 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 146  configure.lineno config.status.lineno
 147 mkinstalldirs = $(SHELL) \
 148         $(top_srcdir)/third_party/nlbuild-autotools/repo/third_party/autoconf/mkinstalldirs
 149 CONFIG_HEADER = $(top_builddir)/include/nlassert-config.h
 150 CONFIG_CLEAN_FILES =
 151 CONFIG_CLEAN_VPATH_FILES =
 152 AM_V_P = $(am__v_P_@AM_V@)
 153 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
 154 am__v_P_0 = false
 155 am__v_P_1 = :
 156 AM_V_GEN = $(am__v_GEN_@AM_V@)
 157 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 158 am__v_GEN_0 = @echo "  GEN     " $@;
 159 am__v_GEN_1 =
 160 AM_V_at = $(am__v_at_@AM_V@)
 161 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 162 am__v_at_0 = @
 163 am__v_at_1 =
 164 SOURCES =
 165 DIST_SOURCES =
 166 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 167         ctags-recursive dvi-recursive html-recursive info-recursive \
 168         install-data-recursive install-dvi-recursive \
 169         install-exec-recursive install-html-recursive \
 170         install-info-recursive install-pdf-recursive \
 171         install-ps-recursive install-recursive installcheck-recursive \
 172         installdirs-recursive pdf-recursive ps-recursive \
 173         tags-recursive uninstall-recursive
 174 am__can_run_installinfo = \
 175   case $$AM_UPDATE_INFO_DIR in \
 176     n|no|NO) false;; \
 177     *) (install-info --version) >/dev/null 2>&1;; \
 178   esac
 179 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 180 am__vpath_adj = case $$p in \
 181     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 182     *) f=$$p;; \
 183   esac;
 184 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 185 am__install_max = 40
 186 am__nobase_strip_setup = \
 187   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 188 am__nobase_strip = \
 189   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 190 am__nobase_list = $(am__nobase_strip_setup); \
 191   for p in $$list; do echo "$$p $$p"; done | \
 192   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 193   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 194     if (++n[$$2] == $(am__install_max)) \
 195       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 196     END { for (dir in files) print dir, files[dir] }'
 197 am__base_list = \
 198   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 199   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 200 am__uninstall_files_from_dir = { \
 201   test -z "$$files" \
 202     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 203     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 204          $(am__cd) "$$dir" && rm -f $$files; }; \
 205   }
 206 am__installdirs = "$(DESTDIR)$(docdir)"
 207 DATA = $(dist_doc_DATA)
 208 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 209   distclean-recursive maintainer-clean-recursive
 210 am__recursive_targets = \
 211   $(RECURSIVE_TARGETS) \
 212   $(RECURSIVE_CLEAN_TARGETS) \
 213   $(am__extra_recursive_targets)
 214 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 215         cscope distdir dist dist-all distcheck
 216 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 217 # Read a list of newline-separated strings from the standard input,
 218 # and print each of them once, without duplicates.  Input order is
 219 # *not* preserved.
 220 am__uniquify_input = $(AWK) '\
 221   BEGIN { nonempty = 0; } \
 222   { items[$$0] = 1; nonempty = 1; } \
 223   END { if (nonempty) { for (i in items) print i; }; } \
 224 '
 225 # Make sure the list of sources is unique.  This is necessary because,
 226 # e.g., the same source file might be shared among _SOURCES variables
 227 # for different programs/libraries.
 228 am__define_uniq_tagged_files = \
 229   list='$(am__tagged_files)'; \
 230   unique=`for i in $$list; do \
 231     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 232   done | $(am__uniquify_input)`
 233 ETAGS = etags
 234 CTAGS = ctags
 235 CSCOPE = cscope
 236 DIST_SUBDIRS = $(SUBDIRS)
 237 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 238 distdir = $(PACKAGE)-$(VERSION)
 239 top_distdir = $(distdir)
 240 am__remove_distdir = \
 241   if test -d "$(distdir)"; then \
 242     find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
 243       && rm -rf "$(distdir)" \
 244       || { sleep 5 && rm -rf "$(distdir)"; }; \
 245   else :; fi
 246 am__post_remove_distdir = $(am__remove_distdir)
 247 am__relativize = \
 248   dir0=`pwd`; \
 249   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 250   sed_rest='s,^[^/]*/*,,'; \
 251   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 252   sed_butlast='s,/*[^/]*$$,,'; \
 253   while test -n "$$dir1"; do \
 254     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 255     if test "$$first" != "."; then \
 256       if test "$$first" = ".."; then \
 257         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 258         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 259       else \
 260         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 261         if test "$$first2" = "$$first"; then \
 262           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 263         else \
 264           dir2="../$$dir2"; \
 265         fi; \
 266         dir0="$$dir0"/"$$first"; \
 267       fi; \
 268     fi; \
 269     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 270   done; \
 271   reldir="$$dir2"
 272 DIST_ARCHIVES = $(distdir).tar.gz
 273 GZIP_ENV = --best
 274 DIST_TARGETS = dist-gzip
 275 distuninstallcheck_listfiles = find . -type f -print
 276 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
 277   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
 278 distcleancheck_listfiles = find . -type f -print
 279 ACLOCAL = @ACLOCAL@
 280 AMTAR = @AMTAR@
 281 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 282 AR = @AR@
 283 AUTOCONF = @AUTOCONF@
 284 AUTOHEADER = @AUTOHEADER@
 285 AUTOMAKE = @AUTOMAKE@
 286 AWK = @AWK@
 287 CC = @CC@
 288 CCDEPMODE = @CCDEPMODE@
 289 CFLAGS = @CFLAGS@
 290 CMP = @CMP@
 291 CPP = @CPP@
 292 CPPFLAGS = @CPPFLAGS@
 293 CXX = @CXX@
 294 CXXCPP = @CXXCPP@
 295 CXXDEPMODE = @CXXDEPMODE@
 296 CXXFLAGS = @CXXFLAGS@
 297 CYGPATH_W = @CYGPATH_W@
 298 DEFS = @DEFS@
 299 DEPDIR = @DEPDIR@
 300 DLLTOOL = @DLLTOOL@
 301 DOT = @DOT@
 302 DOXYGEN = @DOXYGEN@
 303 DOXYGEN_USE_DOT = @DOXYGEN_USE_DOT@
 304 DSYMUTIL = @DSYMUTIL@
 305 DUMPBIN = @DUMPBIN@
 306 ECHO_C = @ECHO_C@
 307 ECHO_N = @ECHO_N@
 308 ECHO_T = @ECHO_T@
 309 EGREP = @EGREP@
 310 EXEEXT = @EXEEXT@
 311 FGREP = @FGREP@
 312 GENHTML = @GENHTML@
 313 GREP = @GREP@
 314 INSTALL = @INSTALL@
 315 INSTALL_DATA = @INSTALL_DATA@
 316 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 317 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 318 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 319 ISYSTEM_CPPFLAGS = @ISYSTEM_CPPFLAGS@
 320 LCOV = @LCOV@
 321 LD = @LD@
 322 LDFLAGS = @LDFLAGS@
 323 LIBNLASSERT_VERSION_AGE = @LIBNLASSERT_VERSION_AGE@
 324 LIBNLASSERT_VERSION_CURRENT = @LIBNLASSERT_VERSION_CURRENT@
 325 LIBNLASSERT_VERSION_INFO = @LIBNLASSERT_VERSION_INFO@
 326 LIBNLASSERT_VERSION_REVISION = @LIBNLASSERT_VERSION_REVISION@
 327 LIBOBJS = @LIBOBJS@
 328 LIBS = @LIBS@
 329 LIBTOOL = @LIBTOOL@
 330 LIPO = @LIPO@
 331 LN_S = @LN_S@
 332 LTLIBOBJS = @LTLIBOBJS@
 333 MAINT = @MAINT@
 334 MAKEINFO = @MAKEINFO@
 335 MANIFEST_TOOL = @MANIFEST_TOOL@
 336 MKDIR_P = @MKDIR_P@
 337 NLUNIT_TEST_CPPFLAGS = @NLUNIT_TEST_CPPFLAGS@
 338 NLUNIT_TEST_FOREIGN_SUBDIR_DEPENDENCY = @NLUNIT_TEST_FOREIGN_SUBDIR_DEPENDENCY@
 339 NLUNIT_TEST_LDFLAGS = @NLUNIT_TEST_LDFLAGS@
 340 NLUNIT_TEST_LIBS = @NLUNIT_TEST_LIBS@
 341 NLUNIT_TEST_SUBDIRS = @NLUNIT_TEST_SUBDIRS@
 342 NM = @NM@
 343 NMEDIT = @NMEDIT@
 344 OBJCOPY = @OBJCOPY@
 345 OBJDUMP = @OBJDUMP@
 346 OBJEXT = @OBJEXT@
 347 OTOOL = @OTOOL@
 348 OTOOL64 = @OTOOL64@
 349 PACKAGE = @PACKAGE@
 350 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 351 PACKAGE_NAME = @PACKAGE_NAME@
 352 PACKAGE_STRING = @PACKAGE_STRING@
 353 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 354 PACKAGE_URL = @PACKAGE_URL@
 355 PACKAGE_VERSION = $(NLASSERT_VERSION)
 356 PATH_SEPARATOR = @PATH_SEPARATOR@
 357 PERL = @PERL@
 358 PKG_CONFIG = @PKG_CONFIG@
 359 RANLIB = @RANLIB@
 360 SED = @SED@
 361 SET_MAKE = @SET_MAKE@
 362 SHELL = @SHELL@
 363 STRIP = @STRIP@
 364 VERSION = $(PACKAGE_VERSION)
 365 abs_builddir = @abs_builddir@
 366 abs_srcdir = @abs_srcdir@
 367 abs_top_builddir = @abs_top_builddir@
 368 abs_top_nlbuild_autotools_dir = @abs_top_nlbuild_autotools_dir@
 369 abs_top_srcdir = @abs_top_srcdir@
 370 ac_ct_AR = @ac_ct_AR@
 371 ac_ct_CC = @ac_ct_CC@
 372 ac_ct_CXX = @ac_ct_CXX@
 373 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 374 am__include = @am__include@
 375 am__leading_dot = @am__leading_dot@
 376 am__quote = @am__quote@
 377 am__tar = @am__tar@
 378 am__untar = @am__untar@
 379 bindir = @bindir@
 380 build = @build@
 381 build_alias = @build_alias@
 382 build_cpu = @build_cpu@
 383 build_os = @build_os@
 384 build_vendor = @build_vendor@
 385 builddir = @builddir@
 386 datadir = @datadir@
 387 datarootdir = @datarootdir@
 388 docdir = @docdir@
 389 dvidir = @dvidir@
 390 exec_prefix = @exec_prefix@
 391 host = @host@
 392 host_alias = @host_alias@
 393 host_cpu = @host_cpu@
 394 host_os = @host_os@
 395 host_vendor = @host_vendor@
 396 htmldir = @htmldir@
 397 includedir = @includedir@
 398 infodir = @infodir@
 399 install_sh = @install_sh@
 400 libdir = @libdir@
 401 libexecdir = @libexecdir@
 402 localedir = @localedir@
 403 localstatedir = @localstatedir@
 404 mandir = @mandir@
 405 mkdir_p = @mkdir_p@
 406 nl_filtered_build = @nl_filtered_build@
 407 nl_filtered_build_cpu = @nl_filtered_build_cpu@
 408 nl_filtered_build_os = @nl_filtered_build_os@
 409 nl_filtered_build_vendor = @nl_filtered_build_vendor@
 410 nl_filtered_host = @nl_filtered_host@
 411 nl_filtered_host_cpu = @nl_filtered_host_cpu@
 412 nl_filtered_host_os = @nl_filtered_host_os@
 413 nl_filtered_host_vendor = @nl_filtered_host_vendor@
 414 nl_filtered_target = @nl_filtered_target@
 415 nl_filtered_target_cpu = @nl_filtered_target_cpu@
 416 nl_filtered_target_os = @nl_filtered_target_os@
 417 nl_filtered_target_vendor = @nl_filtered_target_vendor@
 418 nlbuild_autotools_stem = @nlbuild_autotools_stem@
 419 oldincludedir = @oldincludedir@
 420 pdfdir = @pdfdir@
 421 prefix = @prefix@
 422 program_transform_name = @program_transform_name@
 423 psdir = @psdir@
 424 sbindir = @sbindir@
 425 sharedstatedir = @sharedstatedir@
 426 srcdir = @srcdir@
 427 subdirs = @subdirs@
 428 sysconfdir = @sysconfdir@
 429 target = @target@
 430 target_alias = @target_alias@
 431 target_cpu = @target_cpu@
 432 target_os = @target_os@
 433 target_vendor = @target_vendor@
 434 top_build_prefix = @top_build_prefix@
 435 top_builddir = @top_builddir@
 436 top_srcdir = @top_srcdir@
 437 AM_MAKEFLAGS = --no-print-directory
 438 SUBDIRS = \
 439     third_party                             \
 440     include                                 \
 441     tests                                   \
 442     doc                                     \
 443     $(NULL)
 444
 445 EXTRA_DIST = \
 446     CHANGES                                 \
 447     CONTRIBUTING.md                         \
 448     LICENSE                                 \
 449     Makefile-bootstrap                      \
 450     README.md                               \
 451     .default-version                        \
 452     bootstrap                               \
 453     bootstrap-configure                     \
 454     $(srcdir)/third_party/nlbuild-autotools \
 455     repos.conf                              \
 456     $(NULL)
 457
 458 BUILT_SOURCES = \
 459     .local-version                          \
 460     $(NULL)
 461
 462 dist_doc_DATA = \
 463     $(NULL)
 464
 465 DISTCLEANFILES = \
 466     .local-version                          \
 467     $(NULL)
 468
 469
 470 #
 471 # Package version files:
 472 #
 473 # .default-version - The default package version. This file is ALWAYS checked
 474 #                    in and should always represent the current baseline
 475 #                    version of the package.
 476 #
 477 # .dist-version    - The distributed package version. This file is NEVER
 478 #                    checked in within the upstream repository, is auto-
 479 #                    generated, and is only found in the package distribution.
 480 #
 481 # .local-version   - The current source code controlled package version. This
 482 #                    file is NEVER checked in within the upstream repository,
 483 #                    is auto-generated, and can always be found in both the
 484 #                    build tree and distribution.
 485 #
 486 # When present, the .local-version file is preferred first, the
 487 # .dist-version second, and the .default-version last.
 488 #
 489 VERSION_FILE := $(if $(wildcard $(builddir)/.local-version),$(builddir)/.local-version,$(if $(wildcard $(srcdir)/.dist-version),$(srcdir)/.dist-version,$(srcdir)/.default-version))
 490
 491 #
 492 # When we run 'distcheck' and --with-nlunit_test defaults to 'internal',
 493 # the nlbuild-autotools infrastructure will attempt to create git paths
 494 # to manage the nlunit-test repo. Two directories need to be writable
 495 # to facilitate this.
 496 #
 497 DISTCHECK_CONFIGURE_FLAGS = `chmod u+w .. ../third_party`
 498 all: $(BUILT_SOURCES)
 499         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 500
 501 .SUFFIXES:
 502 am--refresh: Makefile
 503         @:
 504 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 505         @for dep in $?; do \
 506           case '$(am__configure_deps)' in \
 507             *$$dep*) \
 508               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 509               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 510                 && exit 0; \
 511               exit 1;; \
 512           esac; \
 513         done; \
 514         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 515         $(am__cd) $(top_srcdir) && \
 516           $(AUTOMAKE) --foreign Makefile
 517 .PRECIOUS: Makefile
 518 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 519         @case '$?' in \
 520           *config.status*) \
 521             echo ' $(SHELL) ./config.status'; \
 522             $(SHELL) ./config.status;; \
 523           *) \
 524             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 525             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 526         esac;
 527
 528 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 529         $(SHELL) ./config.status --recheck
 530
 531 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 532         $(am__cd) $(srcdir) && $(AUTOCONF)
 533 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 534         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 535 $(am__aclocal_m4_deps):
 536
 537 mostlyclean-libtool:
 538         -rm -f *.lo
 539
 540 clean-libtool:
 541         -rm -rf .libs _libs
 542
 543 distclean-libtool:
 544         -rm -f libtool config.lt
 545 install-dist_docDATA: $(dist_doc_DATA)
 546         @$(NORMAL_INSTALL)
 547         @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
 548         if test -n "$$list"; then \
 549           echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \
 550           $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \
 551         fi; \
 552         for p in $$list; do \
 553           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 554           echo "$$d$$p"; \
 555         done | $(am__base_list) | \
 556         while read files; do \
 557           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \
 558           $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \
 559         done
 560
 561 uninstall-dist_docDATA:
 562         @$(NORMAL_UNINSTALL)
 563         @list='$(dist_doc_DATA)'; test -n "$(docdir)" || list=; \
 564         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 565         dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir)
 566
 567 # This directory's subdirectories are mostly independent; you can cd
 568 # into them and run 'make' without going through this Makefile.
 569 # To change the values of 'make' variables: instead of editing Makefiles,
 570 # (1) if the variable is set in 'config.status', edit 'config.status'
 571 #     (which will cause the Makefiles to be regenerated when you run 'make');
 572 # (2) otherwise, pass the desired values on the 'make' command line.
 573 $(am__recursive_targets):
 574         @fail=; \
 575         if $(am__make_keepgoing); then \
 576           failcom='fail=yes'; \
 577         else \
 578           failcom='exit 1'; \
 579         fi; \
 580         dot_seen=no; \
 581         target=`echo $@ | sed s/-recursive//`; \
 582         case "$@" in \
 583           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 584           *) list='$(SUBDIRS)' ;; \
 585         esac; \
 586         for subdir in $$list; do \
 587           echo "Making $$target in $$subdir"; \
 588           if test "$$subdir" = "."; then \
 589             dot_seen=yes; \
 590             local_target="$$target-am"; \
 591           else \
 592             local_target="$$target"; \
 593           fi; \
 594           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 595           || eval $$failcom; \
 596         done; \
 597         if test "$$dot_seen" = "no"; then \
 598           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 599         fi; test -z "$$fail"
 600
 601 ID: $(am__tagged_files)
 602         $(am__define_uniq_tagged_files); mkid -fID $$unique
 603 tags: tags-recursive
 604 TAGS: tags
 605
 606 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 607         set x; \
 608         here=`pwd`; \
 609         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 610           include_option=--etags-include; \
 611           empty_fix=.; \
 612         else \
 613           include_option=--include; \
 614           empty_fix=; \
 615         fi; \
 616         list='$(SUBDIRS)'; for subdir in $$list; do \
 617           if test "$$subdir" = .; then :; else \
 618             test ! -f $$subdir/TAGS || \
 619               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 620           fi; \
 621         done; \
 622         $(am__define_uniq_tagged_files); \
 623         shift; \
 624         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 625           test -n "$$unique" || unique=$$empty_fix; \
 626           if test $$# -gt 0; then \
 627             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 628               "$$@" $$unique; \
 629           else \
 630             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 631               $$unique; \
 632           fi; \
 633         fi
 634 ctags: ctags-recursive
 635
 636 CTAGS: ctags
 637 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 638         $(am__define_uniq_tagged_files); \
 639         test -z "$(CTAGS_ARGS)$$unique" \
 640           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 641              $$unique
 642
 643 GTAGS:
 644         here=`$(am__cd) $(top_builddir) && pwd` \
 645           && $(am__cd) $(top_srcdir) \
 646           && gtags -i $(GTAGS_ARGS) "$$here"
 647 cscope: cscope.files
 648         test ! -s cscope.files \
 649           || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
 650 clean-cscope:
 651         -rm -f cscope.files
 652 cscope.files: clean-cscope cscopelist
 653 cscopelist: cscopelist-recursive
 654
 655 cscopelist-am: $(am__tagged_files)
 656         list='$(am__tagged_files)'; \
 657         case "$(srcdir)" in \
 658           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 659           *) sdir=$(subdir)/$(srcdir) ;; \
 660         esac; \
 661         for i in $$list; do \
 662           if test -f "$$i"; then \
 663             echo "$(subdir)/$$i"; \
 664           else \
 665             echo "$$sdir/$$i"; \
 666           fi; \
 667         done >> $(top_builddir)/cscope.files
 668
 669 distclean-tags:
 670         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 671         -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
 672
 673 distdir: $(DISTFILES)
 674         $(am__remove_distdir)
 675         test -d "$(distdir)" || mkdir "$(distdir)"
 676         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 677         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 678         list='$(DISTFILES)'; \
 679           dist_files=`for file in $$list; do echo $$file; done | \
 680           sed -e "s|^$$srcdirstrip/||;t" \
 681               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 682         case $$dist_files in \
 683           */*) $(MKDIR_P) `echo "$$dist_files" | \
 684                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 685                            sort -u` ;; \
 686         esac; \
 687         for file in $$dist_files; do \
 688           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 689           if test -d $$d/$$file; then \
 690             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 691             if test -d "$(distdir)/$$file"; then \
 692               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 693             fi; \
 694             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 695               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 696               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 697             fi; \
 698             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 699           else \
 700             test -f "$(distdir)/$$file" \
 701             || cp -p $$d/$$file "$(distdir)/$$file" \
 702             || exit 1; \
 703           fi; \
 704         done
 705         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 706           if test "$$subdir" = .; then :; else \
 707             $(am__make_dryrun) \
 708               || test -d "$(distdir)/$$subdir" \
 709               || $(MKDIR_P) "$(distdir)/$$subdir" \
 710               || exit 1; \
 711             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 712             $(am__relativize); \
 713             new_distdir=$$reldir; \
 714             dir1=$$subdir; dir2="$(top_distdir)"; \
 715             $(am__relativize); \
 716             new_top_distdir=$$reldir; \
 717             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 718             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 719             ($(am__cd) $$subdir && \
 720               $(MAKE) $(AM_MAKEFLAGS) \
 721                 top_distdir="$$new_top_distdir" \
 722                 distdir="$$new_distdir" \
 723                 am__remove_distdir=: \
 724                 am__skip_length_check=: \
 725                 am__skip_mode_fix=: \
 726                 distdir) \
 727               || exit 1; \
 728           fi; \
 729         done
 730         $(MAKE) $(AM_MAKEFLAGS) \
 731           top_distdir="$(top_distdir)" distdir="$(distdir)" \
 732           dist-hook
 733         -test -n "$(am__skip_mode_fix)" \
 734         || find "$(distdir)" -type d ! -perm -755 \
 735                 -exec chmod u+rwx,go+rx {} \; -o \
 736           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 737           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 738           ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
 739         || chmod -R a+r "$(distdir)"
 740 dist-gzip: distdir
 741         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 742         $(am__post_remove_distdir)
 743
 744 dist-bzip2: distdir
 745         tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 746         $(am__post_remove_distdir)
 747
 748 dist-lzip: distdir
 749         tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 750         $(am__post_remove_distdir)
 751
 752 dist-xz: distdir
 753         tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
 754         $(am__post_remove_distdir)
 755
 756 dist-tarZ: distdir
 757         @echo WARNING: "Support for shar distribution archives is" \
 758                        "deprecated." >&2
 759         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 760         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 761         $(am__post_remove_distdir)
 762
 763 dist-shar: distdir
 764         @echo WARNING: "Support for distribution archives compressed with" \
 765                        "legacy program 'compress' is deprecated." >&2
 766         @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
 767         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 768         $(am__post_remove_distdir)
 769
 770 dist-zip: distdir
 771         -rm -f $(distdir).zip
 772         zip -rq $(distdir).zip $(distdir)
 773         $(am__post_remove_distdir)
 774
 775 dist dist-all:
 776         $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
 777         $(am__post_remove_distdir)
 778
 779 # This target untars the dist file and tries a VPATH configuration.  Then
 780 # it guarantees that the distribution is self-contained by making another
 781 # tarfile.
 782 distcheck: dist
 783         case '$(DIST_ARCHIVES)' in \
 784         *.tar.gz*) \
 785           GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 786         *.tar.bz2*) \
 787           bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 788         *.tar.lz*) \
 789           lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 790         *.tar.xz*) \
 791           xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 792         *.tar.Z*) \
 793           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 794         *.shar.gz*) \
 795           GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
 796         *.zip*) \
 797           unzip $(distdir).zip ;;\
 798         esac
 799         chmod -R a-w $(distdir)
 800         chmod u+w $(distdir)
 801         mkdir $(distdir)/_build $(distdir)/_inst
 802         chmod a-w $(distdir)
 803         test -d $(distdir)/_build || exit 0; \
 804         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 805           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 806           && am__cwd=`pwd` \
 807           && $(am__cd) $(distdir)/_build \
 808           && ../configure \
 809             $(AM_DISTCHECK_CONFIGURE_FLAGS) \
 810             $(DISTCHECK_CONFIGURE_FLAGS) \
 811             --srcdir=.. --prefix="$$dc_install_base" \
 812           && $(MAKE) $(AM_MAKEFLAGS) \
 813           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 814           && $(MAKE) $(AM_MAKEFLAGS) check \
 815           && $(MAKE) $(AM_MAKEFLAGS) install \
 816           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 817           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 818           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 819                 distuninstallcheck \
 820           && chmod -R a-w "$$dc_install_base" \
 821           && ({ \
 822                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 823                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 824                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 825                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 826                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 827               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 828           && rm -rf "$$dc_destdir" \
 829           && $(MAKE) $(AM_MAKEFLAGS) dist \
 830           && rm -rf $(DIST_ARCHIVES) \
 831           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
 832           && cd "$$am__cwd" \
 833           || exit 1
 834         $(am__post_remove_distdir)
 835         @(echo "$(distdir) archives ready for distribution: "; \
 836           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 837           sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 838 distuninstallcheck:
 839         @test -n '$(distuninstallcheck_dir)' || { \
 840           echo 'ERROR: trying to run $@ with an empty' \
 841                '$$(distuninstallcheck_dir)' >&2; \
 842           exit 1; \
 843         }; \
 844         $(am__cd) '$(distuninstallcheck_dir)' || { \
 845           echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
 846           exit 1; \
 847         }; \
 848         test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
 849            || { echo "ERROR: files left after uninstall:" ; \
 850                 if test -n "$(DESTDIR)"; then \
 851                   echo "  (check DESTDIR support)"; \
 852                 fi ; \
 853                 $(distuninstallcheck_listfiles) ; \
 854                 exit 1; } >&2
 855 distcleancheck: distclean
 856         @if test '$(srcdir)' = . ; then \
 857           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 858           exit 1 ; \
 859         fi
 860         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 861           || { echo "ERROR: files left in build directory after distclean:" ; \
 862                $(distcleancheck_listfiles) ; \
 863                exit 1; } >&2
 864 check-am: all-am
 865 check: $(BUILT_SOURCES)
 866         $(MAKE) $(AM_MAKEFLAGS) check-recursive
 867 all-am: Makefile $(DATA)
 868 installdirs: installdirs-recursive
 869 installdirs-am:
 870         for dir in "$(DESTDIR)$(docdir)"; do \
 871           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 872         done
 873 install: $(BUILT_SOURCES)
 874         $(MAKE) $(AM_MAKEFLAGS) install-recursive
 875 install-exec: install-exec-recursive
 876 install-data: install-data-recursive
 877 uninstall: uninstall-recursive
 878
 879 install-am: all-am
 880         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 881
 882 installcheck: installcheck-recursive
 883 install-strip:
 884         if test -z '$(STRIP)'; then \
 885           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 886             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 887               install; \
 888         else \
 889           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 890             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 891             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 892         fi
 893 mostlyclean-generic:
 894
 895 clean-generic:
 896
 897 distclean-generic:
 898         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 899         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 900         -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 901
 902 maintainer-clean-generic:
 903         @echo "This command is intended for maintainers to use"
 904         @echo "it deletes files that may require special tools to rebuild."
 905         -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
 906 clean: clean-recursive
 907
 908 clean-am: clean-generic clean-libtool mostlyclean-am
 909
 910 distclean: distclean-recursive
 911         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 912         -rm -f Makefile
 913 distclean-am: clean-am distclean-generic distclean-libtool \
 914         distclean-local distclean-tags
 915
 916 dvi: dvi-recursive
 917
 918 dvi-am:
 919
 920 html: html-recursive
 921
 922 html-am:
 923
 924 info: info-recursive
 925
 926 info-am:
 927
 928 install-data-am: install-dist_docDATA
 929
 930 install-dvi: install-dvi-recursive
 931
 932 install-dvi-am:
 933
 934 install-exec-am:
 935
 936 install-html: install-html-recursive
 937
 938 install-html-am:
 939
 940 install-info: install-info-recursive
 941
 942 install-info-am:
 943
 944 install-man:
 945
 946 install-pdf: install-pdf-recursive
 947
 948 install-pdf-am:
 949
 950 install-ps: install-ps-recursive
 951
 952 install-ps-am:
 953
 954 installcheck-am:
 955
 956 maintainer-clean: maintainer-clean-recursive
 957         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 958         -rm -rf $(top_srcdir)/autom4te.cache
 959         -rm -f Makefile
 960 maintainer-clean-am: distclean-am maintainer-clean-generic
 961
 962 mostlyclean: mostlyclean-recursive
 963
 964 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 965
 966 pdf: pdf-recursive
 967
 968 pdf-am:
 969
 970 ps: ps-recursive
 971
 972 ps-am:
 973
 974 uninstall-am: uninstall-dist_docDATA
 975
 976 .MAKE: $(am__recursive_targets) all check install install-am \
 977         install-strip
 978
 979 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 980         am--refresh check check-am clean clean-cscope clean-generic \
 981         clean-libtool cscope cscopelist-am ctags ctags-am dist \
 982         dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
 983         dist-tarZ dist-xz dist-zip distcheck distclean \
 984         distclean-generic distclean-libtool distclean-local \
 985         distclean-tags distcleancheck distdir distuninstallcheck dvi \
 986         dvi-am html html-am info info-am install install-am \
 987         install-data install-data-am install-dist_docDATA install-dvi \
 988         install-dvi-am install-exec install-exec-am install-html \
 989         install-html-am install-info install-info-am install-man \
 990         install-pdf install-pdf-am install-ps install-ps-am \
 991         install-strip installcheck installcheck-am installdirs \
 992         installdirs-am maintainer-clean maintainer-clean-generic \
 993         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 994         ps ps-am tags tags-am uninstall uninstall-am \
 995         uninstall-dist_docDATA
 996
 997
 998 include $(abs_top_nlbuild_autotools_dir)/automake/pre.am
 999
1000 #
1001 # Override autotool's default notion of the package version variables.
1002 # This ensures that when we create a source distribution that the
1003 # version is always the current version, not the version when the
1004 # package was bootstrapped.
1005 #
1006
1007 NLASSERT_VERSION     ?= $(shell cat $(VERSION_FILE) 2> /dev/null)
1008
1009 #
1010 # check-file-.local-version
1011 #
1012 # Speculatively regenerate .local-version and check to see if it needs
1013 # to be updated.
1014 #
1015 # If NLASSERT_VERSION has been supplied anywhere other than in this file
1016 # (which is implicitly the contents of .local-version), then use that;
1017 # otherwise, attempt to generate it from the SCM system.
1018 #
1019 # This is called from $(call check-file,.local-version).
1020 #
1021 define check-file-.local-version
1022 if [ "$(origin NLASSERT_VERSION)" != "file" ]; then    \
1023     echo "$(NLASSERT_VERSION)" > "$(2)";               \
1024 else                                                   \
1025     $(abs_top_nlbuild_autotools_dir)/scripts/mkversion \
1026         -b "$(NLASSERT_VERSION)" "$(top_srcdir)"       \
1027         > "$(2)";                                      \
1028 fi
1029 endef
1030
1031 #
1032 # check-file-.dist-version
1033 #
1034 # Speculatively regenerate .dist-version and check to see if it needs
1035 # to be updated.
1036 #
1037 # This is called from $(call check-file,.dist-version).
1038 #
1039 define check-file-.dist-version
1040 cat "$(1)" > "$(2)"
1041 endef
1042
1043 #
1044 # A convenience target to allow package users to easily rerun the
1045 # package configuration according to the current configuration.
1046 #
1047 .PHONY: reconfigure
1048 reconfigure: $(builddir)/config.status
1049         $(AM_V_at)$(<) --recheck
1050
1051 #
1052 # Version file regeneration rules.
1053 #
1054 .PHONY: force
1055
1056 $(builddir)/.local-version: $(srcdir)/.default-version force
1057
1058 $(distdir)/.dist-version: $(builddir)/.local-version force
1059
1060 $(distdir)/.dist-version $(builddir)/.local-version:
1061         $(call check-file,$(@F))
1062
1063 dist distcheck: $(BUILT_SOURCES)
1064
1065 dist-hook: $(distdir)/.dist-version
1066
1067 #
1068 # Ensure any locally synchronized repositories defined by 'repos.conf'
1069 # are cleaned up.
1070 #
1071 distclean-local:
1072         $(MAKE) -C $(srcdir) -f Makefile-bootstrap clean-repos
1073
1074 #
1075 # Top-level convenience target for making a documentation-only
1076 # distribution whose results appear at the top level of the build tree
1077 # in the same fashion that the distribution would be for 'make dist'.
1078 #
1079
1080 .PHONY: docdist
1081 docdist: $(BUILT_SOURCES)
1082         $(MAKE) -C doc docdistdir=$(abs_builddir) $(@)
1083
1084 include $(abs_top_nlbuild_autotools_dir)/automake/post.am
1085
1086 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1087 # Otherwise a system limit (for SysV at least) may be exceeded.
1088 .NOEXPORT: