2 #***************************************************************************
4 # Project ___| | | | _ \| |
6 # | (__| |_| | _ <| |___
7 # \___|\___/|_| \_\_____|
9 # Copyright (C) 1998 - 2007, Daniel Stenberg, <daniel@haxx.se>, et al.
11 # This software is licensed as described in the file COPYING, which
12 # you should have received as part of this distribution. The terms
13 # are also available at http://curl.haxx.se/docs/copyright.html.
15 # You may opt to use, copy, modify, merge, publish, distribute and/or sell
16 # copies of the Software, and permit persons to whom the Software is
17 # furnished to do so, under the terms of the COPYING file.
19 # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
20 # KIND, either express or implied.
23 ###########################################################################
25 ###########################
26 # What is This Script?
27 ###########################
29 # testcurl.pl is the master script to use for automatic testing of CVS-curl.
30 # This is written for the purpose of being run from a crontab job or similar
31 # at a regular interval. The output is suitable to be mailed to
32 # curl-autocompile@haxx.se to be dealt with automatically (make sure the
33 # subject includes the word "autobuild" as the mail gets silently discarded
34 # otherwise). The most current build status (with a resonable backlog) will
35 # be published on the curl site, at http://curl.haxx.se/auto/
38 # testcurl.pl [options] [curl-daily-name] > output
42 # --configure=[options] Configure options
43 # --crosscompile This is a crosscompile
44 # --desc=[desc] Description of your test system
45 # --email=[email] Set email address to report as
46 # --mktarball=[command] Command to run after completed test
47 # --name=[name] Set name to report as
48 # --nocvsup Don't update from CVS even though it is a CVS tree
49 # --nobuildconf Don't run buildconf
50 # --runtestopts=[options] Options to pass to runtests.pl
51 # --setup=[file name] File name to read setup from (deprecated)
52 # --target=[your os] Specify your target environment.
54 # if [curl-daily-name] is omitted, a 'curl' CVS directory is assumed.
61 # Turn on warnings (equivalent to -w, which can't be used with /usr/bin/env)
64 use vars qw($version $fixed $infixed $CURLDIR $CVS $pwd $build $buildlog
65 $buildlogname $configurebuild $targetos $confsuffix $binext
67 use vars qw($name $email $desc $confopts $runtestopts $setupfile $mktarball
68 $nocvsup $nobuildconf $crosscompile $timestamp);
70 # version of this script
71 $version='$Revision$';
74 # Determine if we're running from CVS or a canned copy of curl,
75 # or if we got a specific target option or setup file option.
80 if ($ARGV[0] =~ /--target=/) {
81 $targetos = (split(/=/, shift @ARGV))[1];
83 elsif ($ARGV[0] =~ /--setup=/) {
84 $setupfile = (split(/=/, shift @ARGV))[1];
86 elsif ($ARGV[0] =~ /--mktarball=/) {
87 $mktarball = (split(/=/, shift @ARGV))[1];
89 elsif ($ARGV[0] =~ /--name=/) {
90 $name = (split(/=/, shift @ARGV))[1];
92 elsif ($ARGV[0] =~ /--email=/) {
93 $email = (split(/=/, shift @ARGV))[1];
95 elsif ($ARGV[0] =~ /--desc=/) {
96 $desc = (split(/=/, shift @ARGV))[1];
98 elsif ($ARGV[0] =~ /--configure=/) {
99 $confopts = (split(/=/, shift @ARGV))[1];
101 elsif ($ARGV[0] =~ /--nocvsup/) {
105 elsif ($ARGV[0] =~ /--nobuildconf/) {
109 elsif ($ARGV[0] =~ /--crosscompile/) {
113 elsif ($ARGV[0] =~ /--runtestopts=/) {
114 $runtestopts = (split(/=/, shift @ARGV, 2))[1];
117 $CURLDIR=shift @ARGV;
122 # Do the platform-specific stuff here
126 $libext = '.la'; # .la since both libcurl and libcares are made with libtool
127 if ($^O eq 'MSWin32' || $targetos) {
129 # If no target defined on Win32 lets assume vc
132 if ($targetos =~ /vc/ || $targetos =~ /borland/) {
136 elsif ($targetos =~ /mingw32/) {
138 if ($^O eq 'MSWin32') {
142 elsif ($targetos =~ /netware/) {
145 if ($^O eq 'MSWin32') {
154 if (($^O eq 'MSWin32') &&
155 ($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/)) {
157 # Set these things only when building ON Windows and for Win32 platform.
158 # FOR Windows since we might be cross-compiling on another system. Non-
159 # Windows builds still default to configure-style builds with no confsuffix.
162 $confsuffix = '-win32';
170 if ($^O eq 'MSWin32') {
171 foreach (glob($target)) {
173 system("rd /s /q $_");
176 system("rm -rf $target");
181 my ($target, $fn) = @_;
196 print "testcurl: $text\n";
203 chdir $pwd; # cd back to the original root dir
205 if ($pwd && $build) {
206 # we have a build directory name, remove the dir
207 logit "removing the $build dir";
208 rmtree "$pwd/$build";
211 # we have a build log output file left, remove it
212 logit "removing the $buildlogname file";
215 logit "ENDING HERE"; # last line logged!
219 if (open(F, "$setupfile")) {
228 $infixed=0; # so that "additional args to configure" works properly first time...
232 print "please enter your name\n";
239 print "please enter your contact email address\n";
246 print "please enter a one line system description\n";
254 print "please enter your additional arguments to configure\n";
255 print "examples: --with-ssl --enable-debug --enable-ipv6 --with-krb4\n";
264 open(F, ">$setupfile") or die;
265 print F "name='$name'\n";
266 print F "email='$email'\n";
267 print F "desc='$desc'\n";
268 print F "confopts='$confopts'\n";
269 print F "fixed='$fixed'\n";
273 my $str1066os = 'o' x 1066;
275 # Set timestamp to the UTC this script is running. Its value might
276 # be changed later in the script to the value present in curlver.h
277 $timestamp = scalar(gmtime)." UTC";
279 logit "STARTING HERE"; # first line logged, for scripts to trigger on
280 logit 'TRANSFER CONTROL ==== 1120 CHAR LINE' . $str1066os . 'LINE_END';
281 logit "NAME = $name";
282 logit "EMAIL = $email";
283 logit "DESC = $desc";
284 logit "CONFOPTS = $confopts";
285 logit "CPPFLAGS = ".$ENV{CPPFLAGS};
286 logit "CFLAGS = ".$ENV{CFLAGS};
287 logit "LDFLAGS = ".$ENV{LDFLAGS};
288 logit "CC = ".$ENV{CC};
289 logit "target = ".$targetos;
290 logit "version = $version"; # script version
291 logit "date = $timestamp"; # When the test build starts
295 # Make $pwd to become the path without newline. We'll use that in order to cut
296 # off that path from all possible logs and error messages etc.
300 if ($CVS && -d "$CURLDIR/CVS") {
301 logit "$CURLDIR is verified to be a fine source dir";
302 # remove the generated sources to force them to be re-generated each
303 # time we run this test
304 unlink "$CURLDIR/src/hugehelp.c";
305 } elsif (!$CVS && -f "$CURLDIR/tests/testcurl.pl") {
306 logit "$CURLDIR is verified to be a fine daily source dir"
308 mydie "$CURLDIR is not a daily source dir or checked out from CVS!"
312 $buildlogname="buildlog-$$";
313 $buildlog="$pwd/$buildlogname";
315 # remove any previous left-overs
319 # this is to remove old build logs that ended up in the wrong dir
320 foreach (glob("$CURLDIR/buildlog-*")) { unlink $_; }
322 # create a dir to build in
326 logit "build dir $build was created fine";
328 mydie "failed to create dir $build";
331 # get in the curl source tree root
334 # Do the CVS thing, or not...
337 # this is a temporary fix to make things work again, remove later
338 logit "remove ares/aclocal.m4";
339 unlink "ares/aclocal.m4";
341 logit "update from CVS";
345 # update quietly to the latest CVS
347 logit "Skipping CVS update (--nocvsup)";
352 system("cvs -Q up -dP 2>&1");
357 # return !RETURNVALUE so that errors return 0 while goodness
365 logit "failed CVS update attempt number $att.";
368 last; # get out of the loop
374 mydie "failed to update from CVS ($cvsstat), exiting";
377 # Set timestamp to the UTC the CVS update took place.
378 $timestamp = scalar(gmtime)." UTC";
382 logit "told to not run buildconf";
384 elsif ($configurebuild) {
385 # remove possible left-overs from the past
387 unlink "autom4te.cache";
389 # generate the build files
390 logit "invoke buildconf, but filter off the silly aclocal warnings";
391 open(F, "./buildconf 2>&1 |") or die;
392 open(LOG, ">$buildlog") or die;
394 next if /warning: underquoted definition of/;
401 if (grepfile("^buildconf: OK", $buildlog)) {
402 logit "buildconf was successful";
405 mydie "buildconf was NOT successful";
409 logit "buildconf was successful (dummy message)";
413 # Set timestamp to the one in curlver.h if this isn't a CVS test build.
414 if ((-f "include/curl/curlver.h") &&
415 (open(F, "<include/curl/curlver.h"))) {
418 if ($_ =~ /^\#define\s+LIBCURL_TIMESTAMP\s+\"(.+)\".*$/) {
419 my $stampstring = $1;
420 if ($stampstring !~ /CVS/) {
421 $stampstring =~ s/\s+UTC//;
422 $timestamp = $stampstring." UTC";
430 # Show timestamp we are using for this test build.
431 logit "timestamp = $timestamp";
433 if ($configurebuild) {
434 if (-f "configure") {
435 logit "configure created (at least it exists)";
437 mydie "no configure created/found";
440 logit "configure created (dummy message)"; # dummy message to feign success
447 $x='.exe' if ($^O eq 'MSWin32');
449 $s=';' if ($^O eq 'MSWin32');
451 my @pa = split($s, $p);
461 my $make = findinpath("gmake", "make", "nmake");
463 mydie "Couldn't find make in the PATH";
465 logit "going with $make as make";
467 # change to build dir
470 if ($configurebuild) {
471 # run configure script
472 print `../$CURLDIR/configure $confopts 2>&1`;
474 if (-f "lib/Makefile") {
475 logit "configure seems to have finished fine";
477 mydie "configure didn't work";
480 logit "copying files to build dir ...";
481 if (($^O eq 'MSWin32') && ($targetos !~ /netware/)) {
482 system("xcopy /s /q ..\\$CURLDIR .");
483 system("buildconf.bat");
485 elsif (($^O eq 'linux') || ($targetos =~ /netware/)) {
486 system("cp -afr ../$CURLDIR/* .");
487 system("cp -af ../$CURLDIR/Makefile.dist Makefile");
488 system("$make -i -C lib -f Makefile.$targetos prebuild");
489 system("$make -i -C src -f Makefile.$targetos prebuild");
493 logit "display lib/config$confsuffix.h";
494 open(F, "lib/config$confsuffix.h") or die "lib/config$confsuffix.h: $!";
500 if (grepfile("define USE_ARES", "lib/config$confsuffix.h")) {
501 logit "setup to build ares";
503 logit "display ares/config$confsuffix.h";
504 if(open(F, "ares/config$confsuffix.h")) {
514 if ($targetos && !$configurebuild) {
515 logit "$make -f Makefile.$targetos";
516 open(F, "$make -f Makefile.$targetos 2>&1 |") or die;
520 open(F, "$make 2>&1 |") or die;
528 if (-f "libcares$libext") {
529 logit "ares is now built successfully (libcares$libext)";
531 logit "ares build failed (libares$libext)";
534 # cd back to the curl build dir
538 if ($configurebuild) {
540 open(F, "$make -i 2>&1 |") or die;
548 logit "$make -i $targetos";
549 if ($^O eq 'MSWin32') {
550 if ($targetos =~ /vc/) {
551 open(F, "nmake -i $targetos|") or die;
554 open(F, "$make -i $targetos |") or die;
558 open(F, "$make -i $targetos 2>&1 |") or die;
567 if (-f "lib/libcurl$libext") {
568 logit "libcurl was created fine (libcurl$libext)";
571 mydie "libcurl was not created (libcurl$libext)";
574 if (-f "src/curl$binext") {
575 logit "curl was created fine (curl$binext)";
578 mydie "curl was not created (curl$binext)";
581 if ($targetos =~ /netware/) {
582 if (-f '../../curlver') {
583 system('../../curlver');
586 elsif(!$crosscompile) {
587 logit "display curl$binext --version output";
588 open(F, "./src/curl$binext --version|");
596 if ($configurebuild && !$crosscompile) {
599 $o = "TEST_F=\"$runtestopts\" ";
601 logit "$make -k ${o}test-full";
602 open(F, "$make -k ${o}test-full 2>&1 |") or die;
603 open(LOG, ">$buildlog") or die;
612 if (grepfile("^TEST", $buildlog)) {
613 logit "tests were run";
615 mydie "test suite failure";
618 if (grepfile("^TESTFAIL:", $buildlog)) {
619 logit "the tests were not successful";
621 logit "the tests were successful!";
624 # dummy message to feign success
626 logit "cross-compiling, can't run tests";
628 print "TESTDONE: 1 tests out of 0 (dummy message)\n";
631 # create a tarball if we got that option.
632 if (($mktarball ne '') && (-f $mktarball)) {
637 mydie "ending nicely";