1 # source this file; set up for tests
3 # Copyright (C) 2009-2011 Free Software Foundation, Inc.
5 # This program is free software: you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation, either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Using this file in a test
19 # =========================
21 # The typical skeleton of a test looks like this:
24 # . "${srcdir=.}/init.sh"; path_prepend_ .
25 # Execute some commands.
26 # Note that these commands are executed in a subdirectory, therefore you
27 # need to prepend "../" to relative filenames in the build directory.
28 # Note that the "path_prepend_ ." is useful only if the body of your
29 # test invokes programs residing in the initial directory.
30 # For example, if the programs you want to test are in src/, and this test
31 # script is named tests/test-1, then you would use "path_prepend_ ../src",
32 # or perhaps export PATH='$(abs_top_builddir)/src$(PATH_SEPARATOR)'"$$PATH"
33 # to all tests via automake's TESTS_ENVIRONMENT.
34 # Set the exit code 0 for success, 77 for skipped, or 1 or other for failure.
35 # Use the skip_ and fail_ functions to print a diagnostic and then exit
36 # with the corresponding exit code.
39 # Executing a test that uses this file
40 # ====================================
42 # Running a single test:
43 # $ make check TESTS=test-foo.sh
45 # Running a single test, with verbose output:
46 # $ make check TESTS=test-foo.sh VERBOSE=yes
48 # Running a single test, with single-stepping:
49 # 1. Go into a sub-shell:
51 # 2. Set relevant environment variables from TESTS_ENVIRONMENT in the
53 # $ export srcdir=../../tests # this is an example
54 # 3. Execute the commands from the test, copy&pasting them one by one:
55 # $ . "$srcdir/init.sh"; path_prepend_ .
60 ME_=`expr "./$0" : '.*/\(.*\)$'`
62 # We use a trap below for cleanup. This requires us to go through
63 # hoops to get the right exit status transported through the handler.
64 # So use `Exit STATUS' instead of `exit STATUS' inside of the tests.
65 # Turn off errexit here so that we don't trip the bug with OSF1/Tru64
66 # sh inside this function.
67 Exit () { set +e; (exit $1); exit $1; }
69 # Print warnings (e.g., about skipped and failed tests) to this file number.
70 # Override by defining to say, 9, in init.cfg, and putting say,
71 # export ...ENVVAR_SETTINGS...; $(SHELL) 9>&2
72 # in the definition of TESTS_ENVIRONMENT in your tests/Makefile.am file.
73 # This is useful when using automake's parallel tests mode, to print
74 # the reason for skip/failure to console, rather than to the .log files.
77 # Note that correct expansion of "$*" depends on IFS starting with ' '.
78 # Always write the full diagnostic to stderr.
79 # When stderr_fileno_ is not 2, also emit the first line of the
80 # diagnostic to that file descriptor.
83 # If IFS does not start with ' ', set it and emit the warning in a subshell.
85 ' '*) printf '%s\n' "$*" >&2
86 test $stderr_fileno_ = 2 \
87 || { printf '%s\n' "$*" | sed 1q >&$stderr_fileno_ ; } ;;
88 *) (IFS=' '; warn_ "$@");;
91 fail_ () { warn_ "$ME_: failed test: $@"; Exit 1; }
92 skip_ () { warn_ "$ME_: skipped test: $@"; Exit 77; }
93 fatal_ () { warn_ "$ME_: hard error: $@"; Exit 99; }
94 framework_failure_ () { warn_ "$ME_: set-up failure: $@"; Exit 99; }
96 # Sanitize this shell to POSIX mode, if possible.
97 DUALCASE=1; export DUALCASE
98 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
101 alias -g '${1+"$@"}'='"$@"'
104 case `(set -o) 2>/dev/null` in
105 *posix*) set -o posix ;;
109 # We require $(...) support unconditionally.
110 # We require a few additional shell features only when $EXEEXT is nonempty,
111 # in order to support automatic $EXEEXT emulation:
112 # - hyphen-containing alias names
113 # - we prefer to use ${var#...} substitution, rather than having
114 # to work around lack of support for that feature.
115 # The following code attempts to find a shell with support for these features.
116 # If the current shell passes the test, we're done. Otherwise, test other
117 # shells until we find one that passes. If one is found, re-exec it.
118 # If no acceptable shell is found, skip the current test.
120 # The "...set -x; P=1 true 2>err..." test is to disqualify any shell that
121 # emits "P=1" into err, as /bin/sh from SunOS 5.11 and OpenBSD 4.7 do.
123 # Use "9" to indicate success (rather than 0), in case some shell acts
124 # like Solaris 10's /bin/sh but exits successfully instead of with status 2.
126 # Eval this code in a subshell to determine a shell's suitability.
127 # 10 - passes all tests; ok to use
128 # 9 - ok, but enabling "set -x" corrupts app stderr; prefer higher score
130 gl_shell_test_script_='
131 test $(echo y) = y || exit 1
133 if test "$VERBOSE" = yes; then
134 test -n "$( (exec 3>&1; set -x; P=1 true 2>&3) 2> /dev/null)" && score_=9
136 test -z "$EXEEXT" && exit $score_
137 shopt -s expand_aliases
141 && test ${v#a} = bx \
142 && test $(a-b) = zoo \
146 if test "x$1" = "x--no-reexec"; then
149 # Assume a working shell. Export to subshells (setup_ needs this).
150 gl_set_x_corrupts_stderr_=false
151 export gl_set_x_corrupts_stderr_
153 # Record the first marginally acceptable shell.
156 # Search for a shell that meets our requirements.
157 for re_shell_ in __current__ "${CONFIG_SHELL:-no_shell}" \
158 /bin/sh bash dash zsh pdksh fail
160 test "$re_shell_" = no_shell && continue
162 # If we've made it all the way to the sentinel, "fail" without
163 # finding even a marginal shell, skip this test.
164 if test "$re_shell_" = fail; then
165 test -z "$marginal_" && skip_ failed to find an adequate shell
170 # When testing the current shell, simply "eval" the test code.
171 # Otherwise, run it via $re_shell_ -c ...
172 if test "$re_shell_" = __current__; then
173 # 'eval'ing this code makes Solaris 10's /bin/sh exit with
174 # $? set to 2. It does not evaluate any of the code after the
175 # "unexpected" first `('. Thus, we must run it in a subshell.
176 ( eval "$gl_shell_test_script_" ) > /dev/null 2>&1
178 "$re_shell_" -c "$gl_shell_test_script_" 2>/dev/null
183 # $re_shell_ works just fine. Use it.
184 if test $st_ = 10; then
185 gl_set_x_corrupts_stderr_=false
189 # If this is our first marginally acceptable shell, remember it.
190 if test "$st_:$marginal_" = 9: ; then
191 marginal_="$re_shell_"
192 gl_set_x_corrupts_stderr_=true
196 if test "$re_shell_" != __current__; then
197 # Found a usable shell. Preserve -v and -x.
199 *v*x* | *x*v*) opts_=-vx ;;
204 exec "$re_shell_" $opts_ "$0" --no-reexec "$@"
205 echo "$ME_: exec failed" 1>&2
210 test -n "$EXEEXT" && shopt -s expand_aliases
212 # Enable glibc's malloc-perturbing option.
213 # This is useful for exposing code that depends on the fact that
214 # malloc-related functions often return memory that is mostly zeroed.
215 # If you have the time and cycles, use valgrind to do an even better job.
216 : ${MALLOC_PERTURB_=87}
217 export MALLOC_PERTURB_
219 # This is a stub function that is run upon trap (upon regular exit and
220 # interrupt). Override it with a per-test function, e.g., to unmount
221 # a partition, or to undo any other global state changes.
224 if ( diff -u "$0" "$0" < /dev/null ) > /dev/null 2>&1; then
225 compare () { diff -u "$@"; }
226 elif ( cmp --version < /dev/null 2>&1 | grep GNU ) > /dev/null 2>&1; then
227 compare () { cmp -s "$@"; }
229 compare () { cmp "$@"; }
232 # An arbitrary prefix to help distinguish test directories.
233 testdir_prefix_ () { printf gt; }
235 # Run the user-overridable cleanup_ function, remove the temporary
236 # directory and exit with the incoming value of $?.
241 # cd out of the directory we're about to remove
242 cd "$initial_cwd_" || cd / || cd /tmp
243 chmod -R u+rwx "$test_dir_"
244 # If removal fails and exit status was to be 0, then change it to 1.
245 rm -rf "$test_dir_" || { test $__st = 0 && __st=1; }
249 # Given a directory name, DIR, if every entry in it that matches *.exe
250 # contains only the specified bytes (see the case stmt below), then print
251 # a space-separated list of those names and return 0. Otherwise, don't
252 # print anything and return 1. Naming constraints apply also to DIR.
253 find_exe_basenames_ ()
259 for feb_file_ in $feb_dir_/*.exe; do
260 # If there was no *.exe file, or there existed a file named "*.exe" that
261 # was deleted between the above glob expansion and the existence test
262 # below, just skip it.
263 test "x$feb_file_" = "x$feb_dir_/*.exe" && test ! -f "$feb_file_" \
265 # Exempt [.exe, since we can't create a function by that name, yet
266 # we can't invoke [ by PATH search anyways due to shell builtins.
267 test "x$feb_file_" = "x$feb_dir_/[.exe" && continue
269 *[!-a-zA-Z/0-9_.+]*) feb_fail_=1; break;;
270 *) # Remove leading file name components as well as the .exe suffix.
271 feb_file_=${feb_file_##*/}
272 feb_file_=${feb_file_%.exe}
273 feb_result_="$feb_result_$feb_sp_$feb_file_";;
277 test $feb_fail_ = 0 && printf %s "$feb_result_"
281 # Consider the files in directory, $1.
282 # For each file name of the form PROG.exe, create an alias named
283 # PROG that simply invokes PROG.exe, then return 0. If any selected
284 # file name or the directory name, $1, contains an unexpected character,
285 # define no alias and return 1.
291 *) echo "$0: unexpected \$EXEEXT value: $EXEEXT" 1>&2; return 1 ;;
294 base_names_=`find_exe_basenames_ $1` \
295 || { echo "$0 (exe_shim): skipping directory: $1" 1>&2; return 0; }
297 if test -n "$base_names_"; then
298 for base_ in $base_names_; do
299 alias "$base_"="$base_$EXEEXT"
306 # Use this function to prepend to PATH an absolute name for each
307 # specified, possibly-$initial_cwd_-relative, directory.
310 while test $# != 0; do
313 '') fail_ "invalid path dir: '$1'";;
314 /*) abs_path_dir_=$path_dir_;;
315 *) abs_path_dir_=`cd "$initial_cwd_/$path_dir_" && echo "$PWD"` \
316 || fail_ "invalid path dir: $path_dir_";;
318 case $abs_path_dir_ in
319 *:*) fail_ "invalid path dir: '$abs_path_dir_'";;
321 PATH="$abs_path_dir_:$PATH"
323 # Create an alias, FOO, for each FOO.exe in this directory.
324 create_exe_shims_ "$abs_path_dir_" \
325 || fail_ "something failed (above): $abs_path_dir_"
333 if test "$VERBOSE" = yes; then
334 # Test whether set -x may cause the selected shell to corrupt an
335 # application's stderr. Many do, including zsh-4.3.10 and the /bin/sh
336 # from SunOS 5.11, OpenBSD 4.7 and Irix 5.x and 6.5.
337 # If enabling verbose output this way would cause trouble, simply
338 # issue a warning and refrain.
339 if $gl_set_x_corrupts_stderr_; then
340 warn_ "using SHELL=$SHELL with 'set -x' corrupts stderr"
349 pfx_=`testdir_prefix_`
350 test_dir_=`mktempd_ "$initial_cwd_" "$pfx_-$ME_.XXXX"` \
351 || fail_ "failed to create temporary directory in $initial_cwd_"
354 # As autoconf-generated configure scripts do, ensure that IFS
355 # is defined initially, so that saving and restoring $IFS works.
358 IFS=" "" $gl_init_sh_nl_"
360 # This trap statement, along with a trap on 0 below, ensure that the
361 # temporary directory, $test_dir_, is removed upon exit as well as
362 # upon receipt of any of the listed signals.
363 for sig_ in 1 2 3 13 15; do
364 eval "trap 'Exit $(expr $sig_ + 128)' $sig_"
368 # Create a temporary directory, much like mktemp -d does.
369 # Written by Jim Meyering.
371 # Usage: mktempd_ /tmp phoey.XXXXXXXXXX
373 # First, try to use the mktemp program.
374 # Failing that, we'll roll our own mktemp-like function:
375 # - try to get random bytes from /dev/urandom
376 # - failing that, generate output from a combination of quickly-varying
377 # sources and gzip. Ignore non-varying gzip header, and extract
378 # "random" bits from there.
379 # - given those bits, map to file-name bytes using tr, and try to create
380 # the desired directory.
381 # - make only $MAX_TRIES_ attempts
383 # Helper function. Print $N pseudo-random bytes from a-zA-Z0-9.
388 # Maybe try openssl rand -base64 $n_prime_|tr '+/=\012' abcd first?
389 # But if they have openssl, they probably have mktemp, too.
391 chars_=abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
392 dev_rand_=/dev/urandom
393 if test -r "$dev_rand_"; then
394 # Note: 256-length($chars_) == 194; 3 copies of $chars_ is 186 + 8 = 194.
395 dd ibs=$n_ count=1 if=$dev_rand_ 2>/dev/null \
396 | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
400 n_plus_50_=`expr $n_ + 50`
401 cmds_='date; date +%N; free; who -a; w; ps auxww; ps ef; netstat -n'
402 data_=` (eval "$cmds_") 2>&1 | gzip `
404 # Ensure that $data_ has length at least 50+$n_
406 len_=`echo "$data_"|wc -c`
407 test $n_plus_50_ -le $len_ && break;
408 data_=` (echo "$data_"; eval "$cmds_") 2>&1 | gzip `
412 | dd bs=1 skip=50 count=$n_ 2>/dev/null \
413 | LC_ALL=C tr -c $chars_ 01234567$chars_$chars_$chars_
420 *) fail_ "Usage: mktempd_ DIR TEMPLATE";;
428 # Disallow any trailing slash on specified destdir:
429 # it would subvert the post-mktemp "case"-based destdir test.
432 */) fail_ "invalid destination dir: remove trailing slash(es)";;
438 "invalid template: $template_ (must have a suffix of at least 4 X's)";;
441 # First, try to use mktemp.
442 d=`unset TMPDIR; mktemp -d -t -p "$destdir_" "$template_" 2>/dev/null` \
445 # The resulting name must be in the specified directory.
446 case $d in "$destdir_"*);; *) fail=1;; esac
448 # It must have created the directory.
449 test -d "$d" || fail=1
451 # It must have 0700 permissions. Handle sticky "S" bits.
452 perms=`ls -dgo "$d" 2>/dev/null|tr S -` || fail=1
453 case $perms in drwx------*) ;; *) fail=1;; esac
460 # If we reach this point, we'll have to create a directory manually.
462 # Get a copy of the template without its suffix of X's.
463 base_template_=`echo "$template_"|sed 's/XX*$//'`
465 # Calculate how many X's we've just removed.
466 template_length_=`echo "$template_" | wc -c`
467 nx_=`echo "$base_template_" | wc -c`
468 nx_=`expr $template_length_ - $nx_`
473 X_=`rand_bytes_ $nx_`
474 candidate_dir_="$destdir_/$base_template_$X_"
475 err_=`mkdir -m 0700 "$candidate_dir_" 2>&1` \
476 && { echo "$candidate_dir_"; return; }
477 test $MAX_TRIES_ -le $i_ && break;
483 # If you want to override the testdir_prefix_ function,
484 # or to add more utility functions, use this file.
485 test -f "$srcdir/init.cfg" \
486 && . "$srcdir/init.cfg"
489 # This trap is here, rather than in the setup_ function, because some
490 # shells run the exit trap at shell function exit, rather than script exit.