2 Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
4 Changes will remain in memory only, until you decide to write them.
5 After that, of course, the previous content won't be recoverable.
7 Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
9 Command (m for help): Partition type:
10 p primary (0 primary, 0 extended, 4 free)
12 Select (default p): Partition number (1-4, default 1): First sector (2048-104447, default 2048): Using default value 2048
13 Last sector, +sectors or +size{K,M,G} (2048-104447, default 104447):
14 Command (m for help): Partition type:
15 p primary (1 primary, 0 extended, 3 free)
17 Select (default p): Partition number (1-4, default 2): First sector (53248-104447, default 53248): Using default value 53248
18 Last sector, +sectors or +size{K,M,G} (53248-104447, default 104447): Using default value 104447
21 Disk /dev/...: 53 MB, 53477376 bytes
22 32 heads, 32 sectors/track, 102 cylinders, total 104448 sectors
23 Units = sectors of 1 * 512 = 512 bytes
24 Sector size (logical/physical): 512 bytes / 512 bytes
25 I/O size (minimum/optimal): 512 bytes / 32768 bytes
28 Device Boot Start End Blocks Id System
29 /dev/...1 2048 53247 25600 83 Linux
30 /dev/...2 53248 104447 25600 83 Linux
32 Command (m for help): The partition table has been altered!
34 Calling ioctl() to re-read partition table.
38 ID_PART_TABLE_TYPE=dos
39 Probe first RAID member
40 ID_FS_TYPE=linux_raid_member
45 ID_PART_ENTRY_DISK=8:16
46 ID_PART_ENTRY_NUMBER=1
47 ID_PART_ENTRY_OFFSET=2048
48 ID_PART_ENTRY_SCHEME=dos
49 ID_PART_ENTRY_SIZE=51200
50 ID_PART_ENTRY_TYPE=0x83
51 Probe second RAID member
52 ID_FS_TYPE=linux_raid_member
57 ID_PART_ENTRY_DISK=8:16
58 ID_PART_ENTRY_NUMBER=2
59 ID_PART_ENTRY_OFFSET=53248
60 ID_PART_ENTRY_SCHEME=dos
61 ID_PART_ENTRY_SIZE=51200
62 ID_PART_ENTRY_TYPE=0x83