1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
19 pkgdatadir = $(datadir)/@PACKAGE@
20 pkgincludedir = $(includedir)/@PACKAGE@
21 pkglibdir = $(libdir)/@PACKAGE@
22 pkglibexecdir = $(libexecdir)/@PACKAGE@
23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
24 install_sh_DATA = $(install_sh) -c -m 644
25 install_sh_PROGRAM = $(install_sh) -c
26 install_sh_SCRIPT = $(install_sh) -c
27 INSTALL_HEADER = $(INSTALL_DATA)
28 transform = $(program_transform_name)
35 build_triplet = @build@
37 @BUILD_ALISP_TRUE@am__append_1 = sndo-mixer.alisp
38 @BUILD_MODULES_TRUE@am__append_2 = smixer.conf
40 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
41 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
43 $(top_srcdir)/configure.in
44 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
46 mkinstalldirs = $(install_sh) -d
47 CONFIG_HEADER = $(top_builddir)/include/config.h
49 CONFIG_CLEAN_VPATH_FILES =
50 AM_V_GEN = $(am__v_GEN_$(V))
51 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
52 am__v_GEN_0 = @echo " GEN " $@;
53 AM_V_at = $(am__v_at_$(V))
54 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
58 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
59 html-recursive info-recursive install-data-recursive \
60 install-dvi-recursive install-exec-recursive \
61 install-html-recursive install-info-recursive \
62 install-pdf-recursive install-ps-recursive install-recursive \
63 installcheck-recursive installdirs-recursive pdf-recursive \
64 ps-recursive uninstall-recursive
65 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
66 am__vpath_adj = case $$p in \
67 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
70 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
72 am__nobase_strip_setup = \
73 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
75 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
76 am__nobase_list = $(am__nobase_strip_setup); \
77 for p in $$list; do echo "$$p $$p"; done | \
78 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
79 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
80 if (++n[$$2] == $(am__install_max)) \
81 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
82 END { for (dir in files) print dir, files[dir] }'
84 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
85 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
86 am__installdirs = "$(DESTDIR)$(alsadir)"
88 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
89 distclean-recursive maintainer-clean-recursive
90 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
91 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
95 DIST_SUBDIRS = $(SUBDIRS)
96 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
99 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
100 sed_rest='s,^[^/]*/*,,'; \
101 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
102 sed_butlast='s,/*[^/]*$$,,'; \
103 while test -n "$$dir1"; do \
104 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
105 if test "$$first" != "."; then \
106 if test "$$first" = ".."; then \
107 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
108 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
110 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
111 if test "$$first2" = "$$first"; then \
112 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
116 dir0="$$dir0"/"$$first"; \
119 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
123 ALSA_CONFIG_DIR = @ALSA_CONFIG_DIR@
124 ALSA_DEPLIBS = @ALSA_DEPLIBS@
125 ALSA_PKGCONF_DIR = @ALSA_PKGCONF_DIR@
126 ALSA_PLUGIN_DIR = @ALSA_PLUGIN_DIR@
128 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
130 AUTOCONF = @AUTOCONF@
131 AUTOHEADER = @AUTOHEADER@
132 AUTOMAKE = @AUTOMAKE@
135 CCDEPMODE = @CCDEPMODE@
138 CPPFLAGS = @CPPFLAGS@
141 CXXDEPMODE = @CXXDEPMODE@
142 CXXFLAGS = @CXXFLAGS@
143 CYGPATH_W = @CYGPATH_W@
156 INSTALL_DATA = @INSTALL_DATA@
157 INSTALL_PROGRAM = @INSTALL_PROGRAM@
158 INSTALL_SCRIPT = @INSTALL_SCRIPT@
159 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
164 LIBTOOL_VERSION_INFO = @LIBTOOL_VERSION_INFO@
166 LTLIBOBJS = @LTLIBOBJS@
167 MAKEINFO = @MAKEINFO@
171 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
172 PACKAGE_NAME = @PACKAGE_NAME@
173 PACKAGE_STRING = @PACKAGE_STRING@
174 PACKAGE_TARNAME = @PACKAGE_TARNAME@
175 PACKAGE_URL = @PACKAGE_URL@
176 PACKAGE_VERSION = @PACKAGE_VERSION@
177 PATH_SEPARATOR = @PATH_SEPARATOR@
178 PYTHON_INCLUDES = @PYTHON_INCLUDES@
179 PYTHON_LIBS = @PYTHON_LIBS@
181 SET_MAKE = @SET_MAKE@
183 SND_LIB_EXTRAVER = @SND_LIB_EXTRAVER@
184 SND_LIB_MAJOR = @SND_LIB_MAJOR@
185 SND_LIB_MINOR = @SND_LIB_MINOR@
186 SND_LIB_SUBMINOR = @SND_LIB_SUBMINOR@
187 SND_LIB_VERSION = @SND_LIB_VERSION@
189 SYMBOL_PREFIX = @SYMBOL_PREFIX@
191 abs_builddir = @abs_builddir@
192 abs_srcdir = @abs_srcdir@
193 abs_top_builddir = @abs_top_builddir@
194 abs_top_srcdir = @abs_top_srcdir@
195 ac_ct_CC = @ac_ct_CC@
196 ac_ct_CXX = @ac_ct_CXX@
197 ac_ct_F77 = @ac_ct_F77@
198 am__include = @am__include@
199 am__leading_dot = @am__leading_dot@
200 am__quote = @am__quote@
202 am__untar = @am__untar@
205 build_alias = @build_alias@
206 build_cpu = @build_cpu@
207 build_os = @build_os@
208 build_vendor = @build_vendor@
209 builddir = @builddir@
211 datarootdir = @datarootdir@
214 exec_prefix = @exec_prefix@
216 host_alias = @host_alias@
217 host_cpu = @host_cpu@
219 host_vendor = @host_vendor@
221 includedir = @includedir@
223 install_sh = @install_sh@
225 libexecdir = @libexecdir@
226 localedir = @localedir@
227 localstatedir = @localstatedir@
230 oldincludedir = @oldincludedir@
233 program_transform_name = @program_transform_name@
236 sharedstatedir = @sharedstatedir@
238 sysconfdir = @sysconfdir@
239 target_alias = @target_alias@
240 top_build_prefix = @top_build_prefix@
241 top_builddir = @top_builddir@
242 top_srcdir = @top_srcdir@
243 SUBDIRS = cards pcm alsa.conf.d
244 cfg_files = alsa.conf $(am__append_1) $(am__append_2)
245 EXTRA_DIST = $(cfg_files)
246 alsaconfigdir = @ALSA_CONFIG_DIR@
247 alsadir = $(alsaconfigdir)
248 alsa_DATA = $(cfg_files)
252 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
254 case '$(am__configure_deps)' in \
256 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
257 && { if test -f $@; then exit 0; else break; fi; }; \
261 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/conf/Makefile'; \
262 $(am__cd) $(top_srcdir) && \
263 $(AUTOMAKE) --foreign src/conf/Makefile
265 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
268 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
270 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
271 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
274 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
275 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
277 $(top_srcdir)/configure: $(am__configure_deps)
278 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
279 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
280 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
281 $(am__aclocal_m4_deps):
288 install-alsaDATA: $(alsa_DATA)
290 test -z "$(alsadir)" || $(MKDIR_P) "$(DESTDIR)$(alsadir)"
291 @list='$(alsa_DATA)'; test -n "$(alsadir)" || list=; \
292 for p in $$list; do \
293 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
295 done | $(am__base_list) | \
296 while read files; do \
297 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(alsadir)'"; \
298 $(INSTALL_DATA) $$files "$(DESTDIR)$(alsadir)" || exit $$?; \
303 @list='$(alsa_DATA)'; test -n "$(alsadir)" || list=; \
304 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
305 test -n "$$files" || exit 0; \
306 echo " ( cd '$(DESTDIR)$(alsadir)' && rm -f" $$files ")"; \
307 cd "$(DESTDIR)$(alsadir)" && rm -f $$files
309 # This directory's subdirectories are mostly independent; you can cd
310 # into them and run `make' without going through this Makefile.
311 # To change the values of `make' variables: instead of editing Makefiles,
312 # (1) if the variable is set in `config.status', edit `config.status'
313 # (which will cause the Makefiles to be regenerated when you run `make');
314 # (2) otherwise, pass the desired values on the `make' command line.
315 $(RECURSIVE_TARGETS):
316 @fail= failcom='exit 1'; \
317 for f in x $$MAKEFLAGS; do \
320 *k*) failcom='fail=yes';; \
324 target=`echo $@ | sed s/-recursive//`; \
325 list='$(SUBDIRS)'; for subdir in $$list; do \
326 echo "Making $$target in $$subdir"; \
327 if test "$$subdir" = "."; then \
329 local_target="$$target-am"; \
331 local_target="$$target"; \
333 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
336 if test "$$dot_seen" = "no"; then \
337 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
340 $(RECURSIVE_CLEAN_TARGETS):
341 @fail= failcom='exit 1'; \
342 for f in x $$MAKEFLAGS; do \
345 *k*) failcom='fail=yes';; \
350 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
351 *) list='$(SUBDIRS)' ;; \
353 rev=''; for subdir in $$list; do \
354 if test "$$subdir" = "."; then :; else \
355 rev="$$subdir $$rev"; \
359 target=`echo $@ | sed s/-recursive//`; \
360 for subdir in $$rev; do \
361 echo "Making $$target in $$subdir"; \
362 if test "$$subdir" = "."; then \
363 local_target="$$target-am"; \
365 local_target="$$target"; \
367 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
369 done && test -z "$$fail"
371 list='$(SUBDIRS)'; for subdir in $$list; do \
372 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
375 list='$(SUBDIRS)'; for subdir in $$list; do \
376 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
379 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
380 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
381 unique=`for i in $$list; do \
382 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
384 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
385 END { if (nonempty) { for (i in files) print i; }; }'`; \
389 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
390 $(TAGS_FILES) $(LISP)
393 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
394 include_option=--etags-include; \
397 include_option=--include; \
400 list='$(SUBDIRS)'; for subdir in $$list; do \
401 if test "$$subdir" = .; then :; else \
402 test ! -f $$subdir/TAGS || \
403 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
406 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
407 unique=`for i in $$list; do \
408 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
410 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
411 END { if (nonempty) { for (i in files) print i; }; }'`; \
413 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
414 test -n "$$unique" || unique=$$empty_fix; \
415 if test $$# -gt 0; then \
416 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
419 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
424 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
425 $(TAGS_FILES) $(LISP)
426 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
427 unique=`for i in $$list; do \
428 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
430 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
431 END { if (nonempty) { for (i in files) print i; }; }'`; \
432 test -z "$(CTAGS_ARGS)$$unique" \
433 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
437 here=`$(am__cd) $(top_builddir) && pwd` \
438 && $(am__cd) $(top_srcdir) \
439 && gtags -i $(GTAGS_ARGS) "$$here"
442 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
444 distdir: $(DISTFILES)
445 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
446 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
447 list='$(DISTFILES)'; \
448 dist_files=`for file in $$list; do echo $$file; done | \
449 sed -e "s|^$$srcdirstrip/||;t" \
450 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
451 case $$dist_files in \
452 */*) $(MKDIR_P) `echo "$$dist_files" | \
453 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
456 for file in $$dist_files; do \
457 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
458 if test -d $$d/$$file; then \
459 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
460 if test -d "$(distdir)/$$file"; then \
461 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
463 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
464 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
465 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
467 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
469 test -f "$(distdir)/$$file" \
470 || cp -p $$d/$$file "$(distdir)/$$file" \
474 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
475 if test "$$subdir" = .; then :; else \
476 test -d "$(distdir)/$$subdir" \
477 || $(MKDIR_P) "$(distdir)/$$subdir" \
481 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
482 if test "$$subdir" = .; then :; else \
483 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
485 new_distdir=$$reldir; \
486 dir1=$$subdir; dir2="$(top_distdir)"; \
488 new_top_distdir=$$reldir; \
489 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
490 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
491 ($(am__cd) $$subdir && \
492 $(MAKE) $(AM_MAKEFLAGS) \
493 top_distdir="$$new_top_distdir" \
494 distdir="$$new_distdir" \
495 am__remove_distdir=: \
496 am__skip_length_check=: \
497 am__skip_mode_fix=: \
503 check: check-recursive
504 all-am: Makefile $(DATA)
505 installdirs: installdirs-recursive
507 for dir in "$(DESTDIR)$(alsadir)"; do \
508 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
510 install: install-recursive
511 install-exec: install-exec-recursive
512 install-data: install-data-recursive
513 uninstall: uninstall-recursive
516 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
518 installcheck: installcheck-recursive
520 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
521 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
522 `test -z '$(STRIP)' || \
523 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
529 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
530 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
532 maintainer-clean-generic:
533 @echo "This command is intended for maintainers to use"
534 @echo "it deletes files that may require special tools to rebuild."
535 clean: clean-recursive
537 clean-am: clean-generic clean-libtool mostlyclean-am
539 distclean: distclean-recursive
541 distclean-am: clean-am distclean-generic distclean-tags
555 install-data-am: install-alsaDATA
557 install-dvi: install-dvi-recursive
563 install-html: install-html-recursive
567 install-info: install-info-recursive
573 install-pdf: install-pdf-recursive
577 install-ps: install-ps-recursive
583 maintainer-clean: maintainer-clean-recursive
585 maintainer-clean-am: distclean-am maintainer-clean-generic
587 mostlyclean: mostlyclean-recursive
589 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
599 uninstall-am: uninstall-alsaDATA
601 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
602 install-am install-strip tags-recursive
604 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
605 all all-am check check-am clean clean-generic clean-libtool \
606 ctags ctags-recursive distclean distclean-generic \
607 distclean-libtool distclean-tags distdir dvi dvi-am html \
608 html-am info info-am install install-alsaDATA install-am \
609 install-data install-data-am install-dvi install-dvi-am \
610 install-exec install-exec-am install-html install-html-am \
611 install-info install-info-am install-man install-pdf \
612 install-pdf-am install-ps install-ps-am install-strip \
613 installcheck installcheck-am installdirs installdirs-am \
614 maintainer-clean maintainer-clean-generic mostlyclean \
615 mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
616 tags tags-recursive uninstall uninstall-alsaDATA uninstall-am
619 # Tell versions [3.59,3.63) of GNU make to not export all variables.
620 # Otherwise a system limit (for SysV at least) may be exceeded.