src/build_test.cc

   1 // Copyright 2011 Google Inc. All Rights Reserved.
   2 //
   3 // Licensed under the Apache License, Version 2.0 (the "License");
   4 // you may not use this file except in compliance with the License.
   5 // You may obtain a copy of the License at
   6 //
   7 //     http://www.apache.org/licenses/LICENSE-2.0
   8 //
   9 // Unless required by applicable law or agreed to in writing, software
  10 // distributed under the License is distributed on an "AS IS" BASIS,
  11 // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 // See the License for the specific language governing permissions and
  13 // limitations under the License.
  14
  15 #include "build.h"
  16
  17 #include "build_log.h"
  18 #include "deps_log.h"
  19 #include "graph.h"
  20 #include "test.h"
  21
  22 /// Fixture for tests involving Plan.
  23 // Though Plan doesn't use State, it's useful to have one around
  24 // to create Nodes and Edges.
  25 struct PlanTest : public StateTestWithBuiltinRules {
  26   Plan plan_;
  27
  28   /// Because FindWork does not return Edges in any sort of predictable order,
  29   // provide a means to get available Edges in order and in a format which is
  30   // easy to write tests around.
  31   void FindWorkSorted(deque<Edge*>* ret, int count) {
  32     struct CompareEdgesByOutput {
  33       static bool cmp(const Edge* a, const Edge* b) {
  34         return a->outputs_[0]->path() < b->outputs_[0]->path();
  35       }
  36     };
  37
  38     for (int i = 0; i < count; ++i) {
  39       ASSERT_TRUE(plan_.more_to_do());
  40       Edge* edge = plan_.FindWork();
  41       ASSERT_TRUE(edge);
  42       ret->push_back(edge);
  43     }
  44     ASSERT_FALSE(plan_.FindWork());
  45     sort(ret->begin(), ret->end(), CompareEdgesByOutput::cmp);
  46   }
  47 };
  48
  49 TEST_F(PlanTest, Basic) {
  50   AssertParse(&state_,
  51 "build out: cat mid\n"
  52 "build mid: cat in\n");
  53   GetNode("mid")->MarkDirty();
  54   GetNode("out")->MarkDirty();
  55   string err;
  56   EXPECT_TRUE(plan_.AddTarget(GetNode("out"), &err));
  57   ASSERT_EQ("", err);
  58   ASSERT_TRUE(plan_.more_to_do());
  59
  60   Edge* edge = plan_.FindWork();
  61   ASSERT_TRUE(edge);
  62   ASSERT_EQ("in",  edge->inputs_[0]->path());
  63   ASSERT_EQ("mid", edge->outputs_[0]->path());
  64
  65   ASSERT_FALSE(plan_.FindWork());
  66
  67   plan_.EdgeFinished(edge);
  68
  69   edge = plan_.FindWork();
  70   ASSERT_TRUE(edge);
  71   ASSERT_EQ("mid", edge->inputs_[0]->path());
  72   ASSERT_EQ("out", edge->outputs_[0]->path());
  73
  74   plan_.EdgeFinished(edge);
  75
  76   ASSERT_FALSE(plan_.more_to_do());
  77   edge = plan_.FindWork();
  78   ASSERT_EQ(0, edge);
  79 }
  80
  81 // Test that two outputs from one rule can be handled as inputs to the next.
  82 TEST_F(PlanTest, DoubleOutputDirect) {
  83   AssertParse(&state_,
  84 "build out: cat mid1 mid2\n"
  85 "build mid1 mid2: cat in\n");
  86   GetNode("mid1")->MarkDirty();
  87   GetNode("mid2")->MarkDirty();
  88   GetNode("out")->MarkDirty();
  89
  90   string err;
  91   EXPECT_TRUE(plan_.AddTarget(GetNode("out"), &err));
  92   ASSERT_EQ("", err);
  93   ASSERT_TRUE(plan_.more_to_do());
  94
  95   Edge* edge;
  96   edge = plan_.FindWork();
  97   ASSERT_TRUE(edge);  // cat in
  98   plan_.EdgeFinished(edge);
  99
 100   edge = plan_.FindWork();
 101   ASSERT_TRUE(edge);  // cat mid1 mid2
 102   plan_.EdgeFinished(edge);
 103
 104   edge = plan_.FindWork();
 105   ASSERT_FALSE(edge);  // done
 106 }
 107
 108 // Test that two outputs from one rule can eventually be routed to another.
 109 TEST_F(PlanTest, DoubleOutputIndirect) {
 110   AssertParse(&state_,
 111 "build out: cat b1 b2\n"
 112 "build b1: cat a1\n"
 113 "build b2: cat a2\n"
 114 "build a1 a2: cat in\n");
 115   GetNode("a1")->MarkDirty();
 116   GetNode("a2")->MarkDirty();
 117   GetNode("b1")->MarkDirty();
 118   GetNode("b2")->MarkDirty();
 119   GetNode("out")->MarkDirty();
 120   string err;
 121   EXPECT_TRUE(plan_.AddTarget(GetNode("out"), &err));
 122   ASSERT_EQ("", err);
 123   ASSERT_TRUE(plan_.more_to_do());
 124
 125   Edge* edge;
 126   edge = plan_.FindWork();
 127   ASSERT_TRUE(edge);  // cat in
 128   plan_.EdgeFinished(edge);
 129
 130   edge = plan_.FindWork();
 131   ASSERT_TRUE(edge);  // cat a1
 132   plan_.EdgeFinished(edge);
 133
 134   edge = plan_.FindWork();
 135   ASSERT_TRUE(edge);  // cat a2
 136   plan_.EdgeFinished(edge);
 137
 138   edge = plan_.FindWork();
 139   ASSERT_TRUE(edge);  // cat b1 b2
 140   plan_.EdgeFinished(edge);
 141
 142   edge = plan_.FindWork();
 143   ASSERT_FALSE(edge);  // done
 144 }
 145
 146 // Test that two edges from one output can both execute.
 147 TEST_F(PlanTest, DoubleDependent) {
 148   AssertParse(&state_,
 149 "build out: cat a1 a2\n"
 150 "build a1: cat mid\n"
 151 "build a2: cat mid\n"
 152 "build mid: cat in\n");
 153   GetNode("mid")->MarkDirty();
 154   GetNode("a1")->MarkDirty();
 155   GetNode("a2")->MarkDirty();
 156   GetNode("out")->MarkDirty();
 157
 158   string err;
 159   EXPECT_TRUE(plan_.AddTarget(GetNode("out"), &err));
 160   ASSERT_EQ("", err);
 161   ASSERT_TRUE(plan_.more_to_do());
 162
 163   Edge* edge;
 164   edge = plan_.FindWork();
 165   ASSERT_TRUE(edge);  // cat in
 166   plan_.EdgeFinished(edge);
 167
 168   edge = plan_.FindWork();
 169   ASSERT_TRUE(edge);  // cat mid
 170   plan_.EdgeFinished(edge);
 171
 172   edge = plan_.FindWork();
 173   ASSERT_TRUE(edge);  // cat mid
 174   plan_.EdgeFinished(edge);
 175
 176   edge = plan_.FindWork();
 177   ASSERT_TRUE(edge);  // cat a1 a2
 178   plan_.EdgeFinished(edge);
 179
 180   edge = plan_.FindWork();
 181   ASSERT_FALSE(edge);  // done
 182 }
 183
 184 TEST_F(PlanTest, DependencyCycle) {
 185   AssertParse(&state_,
 186 "build out: cat mid\n"
 187 "build mid: cat in\n"
 188 "build in: cat pre\n"
 189 "build pre: cat out\n");
 190   GetNode("out")->MarkDirty();
 191   GetNode("mid")->MarkDirty();
 192   GetNode("in")->MarkDirty();
 193   GetNode("pre")->MarkDirty();
 194
 195   string err;
 196   EXPECT_FALSE(plan_.AddTarget(GetNode("out"), &err));
 197   ASSERT_EQ("dependency cycle: out -> mid -> in -> pre -> out", err);
 198 }
 199
 200 TEST_F(PlanTest, PoolWithDepthOne) {
 201   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 202 "pool foobar\n"
 203 "  depth = 1\n"
 204 "rule poolcat\n"
 205 "  command = cat $in > $out\n"
 206 "  pool = foobar\n"
 207 "build out1: poolcat in\n"
 208 "build out2: poolcat in\n"));
 209   GetNode("out1")->MarkDirty();
 210   GetNode("out2")->MarkDirty();
 211   string err;
 212   EXPECT_TRUE(plan_.AddTarget(GetNode("out1"), &err));
 213   ASSERT_EQ("", err);
 214   EXPECT_TRUE(plan_.AddTarget(GetNode("out2"), &err));
 215   ASSERT_EQ("", err);
 216   ASSERT_TRUE(plan_.more_to_do());
 217
 218   Edge* edge = plan_.FindWork();
 219   ASSERT_TRUE(edge);
 220   ASSERT_EQ("in",  edge->inputs_[0]->path());
 221   ASSERT_EQ("out1", edge->outputs_[0]->path());
 222
 223   // This will be false since poolcat is serialized
 224   ASSERT_FALSE(plan_.FindWork());
 225
 226   plan_.EdgeFinished(edge);
 227
 228   edge = plan_.FindWork();
 229   ASSERT_TRUE(edge);
 230   ASSERT_EQ("in", edge->inputs_[0]->path());
 231   ASSERT_EQ("out2", edge->outputs_[0]->path());
 232
 233   ASSERT_FALSE(plan_.FindWork());
 234
 235   plan_.EdgeFinished(edge);
 236
 237   ASSERT_FALSE(plan_.more_to_do());
 238   edge = plan_.FindWork();
 239   ASSERT_EQ(0, edge);
 240 }
 241
 242 TEST_F(PlanTest, PoolsWithDepthTwo) {
 243   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 244 "pool foobar\n"
 245 "  depth = 2\n"
 246 "pool bazbin\n"
 247 "  depth = 2\n"
 248 "rule foocat\n"
 249 "  command = cat $in > $out\n"
 250 "  pool = foobar\n"
 251 "rule bazcat\n"
 252 "  command = cat $in > $out\n"
 253 "  pool = bazbin\n"
 254 "build out1: foocat in\n"
 255 "build out2: foocat in\n"
 256 "build out3: foocat in\n"
 257 "build outb1: bazcat in\n"
 258 "build outb2: bazcat in\n"
 259 "build outb3: bazcat in\n"
 260 "  pool =\n"
 261 "build allTheThings: cat out1 out2 out3 outb1 outb2 outb3\n"
 262 ));
 263   // Mark all the out* nodes dirty
 264   for (int i = 0; i < 3; ++i) {
 265     GetNode("out" + string(1, '1' + static_cast<char>(i)))->MarkDirty();
 266     GetNode("outb" + string(1, '1' + static_cast<char>(i)))->MarkDirty();
 267   }
 268   GetNode("allTheThings")->MarkDirty();
 269
 270   string err;
 271   EXPECT_TRUE(plan_.AddTarget(GetNode("allTheThings"), &err));
 272   ASSERT_EQ("", err);
 273
 274   deque<Edge*> edges;
 275   FindWorkSorted(&edges, 5);
 276
 277   for (int i = 0; i < 4; ++i) {
 278     Edge *edge = edges[i];
 279     ASSERT_EQ("in",  edge->inputs_[0]->path());
 280     string base_name(i < 2 ? "out" : "outb");
 281     ASSERT_EQ(base_name + string(1, '1' + (i % 2)), edge->outputs_[0]->path());
 282   }
 283
 284   // outb3 is exempt because it has an empty pool
 285   Edge* edge = edges[4];
 286   ASSERT_TRUE(edge);
 287   ASSERT_EQ("in",  edge->inputs_[0]->path());
 288   ASSERT_EQ("outb3", edge->outputs_[0]->path());
 289
 290   // finish out1
 291   plan_.EdgeFinished(edges.front());
 292   edges.pop_front();
 293
 294   // out3 should be available
 295   Edge* out3 = plan_.FindWork();
 296   ASSERT_TRUE(out3);
 297   ASSERT_EQ("in",  out3->inputs_[0]->path());
 298   ASSERT_EQ("out3", out3->outputs_[0]->path());
 299
 300   ASSERT_FALSE(plan_.FindWork());
 301
 302   plan_.EdgeFinished(out3);
 303
 304   ASSERT_FALSE(plan_.FindWork());
 305
 306   for (deque<Edge*>::iterator it = edges.begin(); it != edges.end(); ++it) {
 307     plan_.EdgeFinished(*it);
 308   }
 309
 310   Edge* last = plan_.FindWork();
 311   ASSERT_TRUE(last);
 312   ASSERT_EQ("allTheThings", last->outputs_[0]->path());
 313
 314   plan_.EdgeFinished(last);
 315
 316   ASSERT_FALSE(plan_.more_to_do());
 317   ASSERT_FALSE(plan_.FindWork());
 318 }
 319
 320 TEST_F(PlanTest, PoolWithRedundantEdges) {
 321   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 322     "pool compile\n"
 323     "  depth = 1\n"
 324     "rule gen_foo\n"
 325     "  command = touch foo.cpp\n"
 326     "rule gen_bar\n"
 327     "  command = touch bar.cpp\n"
 328     "rule echo\n"
 329     "  command = echo $out > $out\n"
 330     "build foo.cpp.obj: echo foo.cpp || foo.cpp\n"
 331     "  pool = compile\n"
 332     "build bar.cpp.obj: echo bar.cpp || bar.cpp\n"
 333     "  pool = compile\n"
 334     "build libfoo.a: echo foo.cpp.obj bar.cpp.obj\n"
 335     "build foo.cpp: gen_foo\n"
 336     "build bar.cpp: gen_bar\n"
 337     "build all: phony libfoo.a\n"));
 338   GetNode("foo.cpp")->MarkDirty();
 339   GetNode("foo.cpp.obj")->MarkDirty();
 340   GetNode("bar.cpp")->MarkDirty();
 341   GetNode("bar.cpp.obj")->MarkDirty();
 342   GetNode("libfoo.a")->MarkDirty();
 343   GetNode("all")->MarkDirty();
 344   string err;
 345   EXPECT_TRUE(plan_.AddTarget(GetNode("all"), &err));
 346   ASSERT_EQ("", err);
 347   ASSERT_TRUE(plan_.more_to_do());
 348
 349   Edge* edge = NULL;
 350
 351   deque<Edge*> initial_edges;
 352   FindWorkSorted(&initial_edges, 2);
 353
 354   edge = initial_edges[1];  // Foo first
 355   ASSERT_EQ("foo.cpp", edge->outputs_[0]->path());
 356   plan_.EdgeFinished(edge);
 357
 358   edge = plan_.FindWork();
 359   ASSERT_TRUE(edge);
 360   ASSERT_FALSE(plan_.FindWork());
 361   ASSERT_EQ("foo.cpp", edge->inputs_[0]->path());
 362   ASSERT_EQ("foo.cpp", edge->inputs_[1]->path());
 363   ASSERT_EQ("foo.cpp.obj", edge->outputs_[0]->path());
 364   plan_.EdgeFinished(edge);
 365
 366   edge = initial_edges[0];  // Now for bar
 367   ASSERT_EQ("bar.cpp", edge->outputs_[0]->path());
 368   plan_.EdgeFinished(edge);
 369
 370   edge = plan_.FindWork();
 371   ASSERT_TRUE(edge);
 372   ASSERT_FALSE(plan_.FindWork());
 373   ASSERT_EQ("bar.cpp", edge->inputs_[0]->path());
 374   ASSERT_EQ("bar.cpp", edge->inputs_[1]->path());
 375   ASSERT_EQ("bar.cpp.obj", edge->outputs_[0]->path());
 376   plan_.EdgeFinished(edge);
 377
 378   edge = plan_.FindWork();
 379   ASSERT_TRUE(edge);
 380   ASSERT_FALSE(plan_.FindWork());
 381   ASSERT_EQ("foo.cpp.obj", edge->inputs_[0]->path());
 382   ASSERT_EQ("bar.cpp.obj", edge->inputs_[1]->path());
 383   ASSERT_EQ("libfoo.a", edge->outputs_[0]->path());
 384   plan_.EdgeFinished(edge);
 385
 386   edge = plan_.FindWork();
 387   ASSERT_TRUE(edge);
 388   ASSERT_FALSE(plan_.FindWork());
 389   ASSERT_EQ("libfoo.a", edge->inputs_[0]->path());
 390   ASSERT_EQ("all", edge->outputs_[0]->path());
 391   plan_.EdgeFinished(edge);
 392
 393   edge = plan_.FindWork();
 394   ASSERT_FALSE(edge);
 395   ASSERT_FALSE(plan_.more_to_do());
 396 }
 397
 398 /// Fake implementation of CommandRunner, useful for tests.
 399 struct FakeCommandRunner : public CommandRunner {
 400   explicit FakeCommandRunner(VirtualFileSystem* fs) :
 401       last_command_(NULL), fs_(fs) {}
 402
 403   // CommandRunner impl
 404   virtual bool CanRunMore();
 405   virtual bool StartCommand(Edge* edge);
 406   virtual bool WaitForCommand(Result* result);
 407   virtual vector<Edge*> GetActiveEdges();
 408   virtual void Abort();
 409
 410   vector<string> commands_ran_;
 411   Edge* last_command_;
 412   VirtualFileSystem* fs_;
 413 };
 414
 415 struct BuildTest : public StateTestWithBuiltinRules {
 416   BuildTest() : config_(MakeConfig()), command_runner_(&fs_),
 417                 builder_(&state_, config_, NULL, NULL, &fs_),
 418                 status_(config_) {
 419   }
 420
 421   virtual void SetUp() {
 422     StateTestWithBuiltinRules::SetUp();
 423
 424     builder_.command_runner_.reset(&command_runner_);
 425     AssertParse(&state_,
 426 "build cat1: cat in1\n"
 427 "build cat2: cat in1 in2\n"
 428 "build cat12: cat cat1 cat2\n");
 429
 430     fs_.Create("in1", "");
 431     fs_.Create("in2", "");
 432   }
 433
 434   ~BuildTest() {
 435     builder_.command_runner_.release();
 436   }
 437
 438   // Mark a path dirty.
 439   void Dirty(const string& path);
 440
 441   BuildConfig MakeConfig() {
 442     BuildConfig config;
 443     config.verbosity = BuildConfig::QUIET;
 444     return config;
 445   }
 446
 447   BuildConfig config_;
 448   FakeCommandRunner command_runner_;
 449   VirtualFileSystem fs_;
 450   Builder builder_;
 451
 452   BuildStatus status_;
 453 };
 454
 455 bool FakeCommandRunner::CanRunMore() {
 456   // Only run one at a time.
 457   return last_command_ == NULL;
 458 }
 459
 460 bool FakeCommandRunner::StartCommand(Edge* edge) {
 461   assert(!last_command_);
 462   commands_ran_.push_back(edge->EvaluateCommand());
 463   if (edge->rule().name() == "cat"  ||
 464       edge->rule().name() == "cat_rsp" ||
 465       edge->rule().name() == "cc" ||
 466       edge->rule().name() == "touch" ||
 467       edge->rule().name() == "touch-interrupt") {
 468     for (vector<Node*>::iterator out = edge->outputs_.begin();
 469          out != edge->outputs_.end(); ++out) {
 470       fs_->Create((*out)->path(), "");
 471     }
 472   } else if (edge->rule().name() == "true" ||
 473              edge->rule().name() == "fail" ||
 474              edge->rule().name() == "interrupt") {
 475     // Don't do anything.
 476   } else {
 477     printf("unknown command\n");
 478     return false;
 479   }
 480
 481   last_command_ = edge;
 482   return true;
 483 }
 484
 485 bool FakeCommandRunner::WaitForCommand(Result* result) {
 486   if (!last_command_)
 487     return false;
 488
 489   Edge* edge = last_command_;
 490   result->edge = edge;
 491
 492   if (edge->rule().name() == "interrupt" ||
 493       edge->rule().name() == "touch-interrupt") {
 494     result->status = ExitInterrupted;
 495     return true;
 496   }
 497
 498   if (edge->rule().name() == "fail")
 499     result->status = ExitFailure;
 500   else
 501     result->status = ExitSuccess;
 502   last_command_ = NULL;
 503   return true;
 504 }
 505
 506 vector<Edge*> FakeCommandRunner::GetActiveEdges() {
 507   vector<Edge*> edges;
 508   if (last_command_)
 509     edges.push_back(last_command_);
 510   return edges;
 511 }
 512
 513 void FakeCommandRunner::Abort() {
 514   last_command_ = NULL;
 515 }
 516
 517 void BuildTest::Dirty(const string& path) {
 518   Node* node = GetNode(path);
 519   node->MarkDirty();
 520
 521   // If it's an input file, mark that we've already stat()ed it and
 522   // it's missing.
 523   if (!node->in_edge())
 524     node->MarkMissing();
 525 }
 526
 527 TEST_F(BuildTest, NoWork) {
 528   string err;
 529   EXPECT_TRUE(builder_.AlreadyUpToDate());
 530 }
 531
 532 TEST_F(BuildTest, OneStep) {
 533   // Given a dirty target with one ready input,
 534   // we should rebuild the target.
 535   Dirty("cat1");
 536   string err;
 537   EXPECT_TRUE(builder_.AddTarget("cat1", &err));
 538   ASSERT_EQ("", err);
 539   EXPECT_TRUE(builder_.Build(&err));
 540   ASSERT_EQ("", err);
 541
 542   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 543   EXPECT_EQ("cat in1 > cat1", command_runner_.commands_ran_[0]);
 544 }
 545
 546 TEST_F(BuildTest, OneStep2) {
 547   // Given a target with one dirty input,
 548   // we should rebuild the target.
 549   Dirty("cat1");
 550   string err;
 551   EXPECT_TRUE(builder_.AddTarget("cat1", &err));
 552   ASSERT_EQ("", err);
 553   EXPECT_TRUE(builder_.Build(&err));
 554   EXPECT_EQ("", err);
 555
 556   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 557   EXPECT_EQ("cat in1 > cat1", command_runner_.commands_ran_[0]);
 558 }
 559
 560 TEST_F(BuildTest, TwoStep) {
 561   string err;
 562   EXPECT_TRUE(builder_.AddTarget("cat12", &err));
 563   ASSERT_EQ("", err);
 564   EXPECT_TRUE(builder_.Build(&err));
 565   EXPECT_EQ("", err);
 566   ASSERT_EQ(3u, command_runner_.commands_ran_.size());
 567   // Depending on how the pointers work out, we could've ran
 568   // the first two commands in either order.
 569   EXPECT_TRUE((command_runner_.commands_ran_[0] == "cat in1 > cat1" &&
 570                command_runner_.commands_ran_[1] == "cat in1 in2 > cat2") ||
 571               (command_runner_.commands_ran_[1] == "cat in1 > cat1" &&
 572                command_runner_.commands_ran_[0] == "cat in1 in2 > cat2"));
 573
 574   EXPECT_EQ("cat cat1 cat2 > cat12", command_runner_.commands_ran_[2]);
 575
 576   fs_.Tick();
 577
 578   // Modifying in2 requires rebuilding one intermediate file
 579   // and the final file.
 580   fs_.Create("in2", "");
 581   state_.Reset();
 582   EXPECT_TRUE(builder_.AddTarget("cat12", &err));
 583   ASSERT_EQ("", err);
 584   EXPECT_TRUE(builder_.Build(&err));
 585   ASSERT_EQ("", err);
 586   ASSERT_EQ(5u, command_runner_.commands_ran_.size());
 587   EXPECT_EQ("cat in1 in2 > cat2", command_runner_.commands_ran_[3]);
 588   EXPECT_EQ("cat cat1 cat2 > cat12", command_runner_.commands_ran_[4]);
 589 }
 590
 591 TEST_F(BuildTest, TwoOutputs) {
 592   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 593 "rule touch\n"
 594 "  command = touch $out\n"
 595 "build out1 out2: touch in.txt\n"));
 596
 597   fs_.Create("in.txt", "");
 598
 599   string err;
 600   EXPECT_TRUE(builder_.AddTarget("out1", &err));
 601   ASSERT_EQ("", err);
 602   EXPECT_TRUE(builder_.Build(&err));
 603   EXPECT_EQ("", err);
 604   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 605   EXPECT_EQ("touch out1 out2", command_runner_.commands_ran_[0]);
 606 }
 607
 608 // Test case from
 609 //   https://github.com/martine/ninja/issues/148
 610 TEST_F(BuildTest, MultiOutIn) {
 611   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 612 "rule touch\n"
 613 "  command = touch $out\n"
 614 "build in1 otherfile: touch in\n"
 615 "build out: touch in | in1\n"));
 616
 617   fs_.Create("in", "");
 618   fs_.Tick();
 619   fs_.Create("in1", "");
 620
 621   string err;
 622   EXPECT_TRUE(builder_.AddTarget("out", &err));
 623   ASSERT_EQ("", err);
 624   EXPECT_TRUE(builder_.Build(&err));
 625   EXPECT_EQ("", err);
 626 }
 627
 628 TEST_F(BuildTest, Chain) {
 629   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 630 "build c2: cat c1\n"
 631 "build c3: cat c2\n"
 632 "build c4: cat c3\n"
 633 "build c5: cat c4\n"));
 634
 635   fs_.Create("c1", "");
 636
 637   string err;
 638   EXPECT_TRUE(builder_.AddTarget("c5", &err));
 639   ASSERT_EQ("", err);
 640   EXPECT_TRUE(builder_.Build(&err));
 641   EXPECT_EQ("", err);
 642   ASSERT_EQ(4u, command_runner_.commands_ran_.size());
 643
 644   err.clear();
 645   command_runner_.commands_ran_.clear();
 646   state_.Reset();
 647   EXPECT_TRUE(builder_.AddTarget("c5", &err));
 648   ASSERT_EQ("", err);
 649   EXPECT_TRUE(builder_.AlreadyUpToDate());
 650
 651   fs_.Tick();
 652
 653   fs_.Create("c3", "");
 654   err.clear();
 655   command_runner_.commands_ran_.clear();
 656   state_.Reset();
 657   EXPECT_TRUE(builder_.AddTarget("c5", &err));
 658   ASSERT_EQ("", err);
 659   EXPECT_FALSE(builder_.AlreadyUpToDate());
 660   EXPECT_TRUE(builder_.Build(&err));
 661   ASSERT_EQ(2u, command_runner_.commands_ran_.size());  // 3->4, 4->5
 662 }
 663
 664 TEST_F(BuildTest, MissingInput) {
 665   // Input is referenced by build file, but no rule for it.
 666   string err;
 667   Dirty("in1");
 668   EXPECT_FALSE(builder_.AddTarget("cat1", &err));
 669   EXPECT_EQ("'in1', needed by 'cat1', missing and no known rule to make it",
 670             err);
 671 }
 672
 673 TEST_F(BuildTest, MissingTarget) {
 674   // Target is not referenced by build file.
 675   string err;
 676   EXPECT_FALSE(builder_.AddTarget("meow", &err));
 677   EXPECT_EQ("unknown target: 'meow'", err);
 678 }
 679
 680 TEST_F(BuildTest, MakeDirs) {
 681   string err;
 682
 683 #ifdef _WIN32
 684   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 685                                       "build subdir\\dir2\\file: cat in1\n"));
 686   EXPECT_TRUE(builder_.AddTarget("subdir\\dir2\\file", &err));
 687 #else
 688   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 689                                       "build subdir/dir2/file: cat in1\n"));
 690   EXPECT_TRUE(builder_.AddTarget("subdir/dir2/file", &err));
 691 #endif
 692
 693   EXPECT_EQ("", err);
 694   EXPECT_TRUE(builder_.Build(&err));
 695   ASSERT_EQ("", err);
 696   ASSERT_EQ(2u, fs_.directories_made_.size());
 697   EXPECT_EQ("subdir", fs_.directories_made_[0]);
 698 #ifdef _WIN32
 699   EXPECT_EQ("subdir\\dir2", fs_.directories_made_[1]);
 700 #else
 701   EXPECT_EQ("subdir/dir2", fs_.directories_made_[1]);
 702 #endif
 703 }
 704
 705 TEST_F(BuildTest, DepFileMissing) {
 706   string err;
 707   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 708 "rule cc\n  command = cc $in\n  depfile = $out.d\n"
 709 "build foo.o: cc foo.c\n"));
 710   fs_.Create("foo.c", "");
 711
 712   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 713   ASSERT_EQ("", err);
 714   ASSERT_EQ(1u, fs_.files_read_.size());
 715   EXPECT_EQ("foo.o.d", fs_.files_read_[0]);
 716 }
 717
 718 TEST_F(BuildTest, DepFileOK) {
 719   string err;
 720   int orig_edges = state_.edges_.size();
 721   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 722 "rule cc\n  command = cc $in\n  depfile = $out.d\n"
 723 "build foo.o: cc foo.c\n"));
 724   Edge* edge = state_.edges_.back();
 725
 726   fs_.Create("foo.c", "");
 727   GetNode("bar.h")->MarkDirty();  // Mark bar.h as missing.
 728   fs_.Create("foo.o.d", "foo.o: blah.h bar.h\n");
 729   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 730   ASSERT_EQ("", err);
 731   ASSERT_EQ(1u, fs_.files_read_.size());
 732   EXPECT_EQ("foo.o.d", fs_.files_read_[0]);
 733
 734   // Expect three new edges: one generating foo.o, and two more from
 735   // loading the depfile.
 736   ASSERT_EQ(orig_edges + 3, (int)state_.edges_.size());
 737   // Expect our edge to now have three inputs: foo.c and two headers.
 738   ASSERT_EQ(3u, edge->inputs_.size());
 739
 740   // Expect the command line we generate to only use the original input.
 741   ASSERT_EQ("cc foo.c", edge->EvaluateCommand());
 742 }
 743
 744 TEST_F(BuildTest, DepFileParseError) {
 745   string err;
 746   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 747 "rule cc\n  command = cc $in\n  depfile = $out.d\n"
 748 "build foo.o: cc foo.c\n"));
 749   fs_.Create("foo.c", "");
 750   fs_.Create("foo.o.d", "randomtext\n");
 751   EXPECT_FALSE(builder_.AddTarget("foo.o", &err));
 752   EXPECT_EQ("expected depfile 'foo.o.d' to mention 'foo.o', got 'randomtext'",
 753             err);
 754 }
 755
 756 TEST_F(BuildTest, OrderOnlyDeps) {
 757   string err;
 758   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 759 "rule cc\n  command = cc $in\n  depfile = $out.d\n"
 760 "build foo.o: cc foo.c || otherfile\n"));
 761   Edge* edge = state_.edges_.back();
 762
 763   fs_.Create("foo.c", "");
 764   fs_.Create("otherfile", "");
 765   fs_.Create("foo.o.d", "foo.o: blah.h bar.h\n");
 766   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 767   ASSERT_EQ("", err);
 768
 769   // One explicit, two implicit, one order only.
 770   ASSERT_EQ(4u, edge->inputs_.size());
 771   EXPECT_EQ(2, edge->implicit_deps_);
 772   EXPECT_EQ(1, edge->order_only_deps_);
 773   // Verify the inputs are in the order we expect
 774   // (explicit then implicit then orderonly).
 775   EXPECT_EQ("foo.c", edge->inputs_[0]->path());
 776   EXPECT_EQ("blah.h", edge->inputs_[1]->path());
 777   EXPECT_EQ("bar.h", edge->inputs_[2]->path());
 778   EXPECT_EQ("otherfile", edge->inputs_[3]->path());
 779
 780   // Expect the command line we generate to only use the original input.
 781   ASSERT_EQ("cc foo.c", edge->EvaluateCommand());
 782
 783   // explicit dep dirty, expect a rebuild.
 784   EXPECT_TRUE(builder_.Build(&err));
 785   ASSERT_EQ("", err);
 786   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 787
 788   fs_.Tick();
 789
 790   // Recreate the depfile, as it should have been deleted by the build.
 791   fs_.Create("foo.o.d", "foo.o: blah.h bar.h\n");
 792
 793   // implicit dep dirty, expect a rebuild.
 794   fs_.Create("blah.h", "");
 795   fs_.Create("bar.h", "");
 796   command_runner_.commands_ran_.clear();
 797   state_.Reset();
 798   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 799   EXPECT_TRUE(builder_.Build(&err));
 800   ASSERT_EQ("", err);
 801   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 802
 803   fs_.Tick();
 804
 805   // Recreate the depfile, as it should have been deleted by the build.
 806   fs_.Create("foo.o.d", "foo.o: blah.h bar.h\n");
 807
 808   // order only dep dirty, no rebuild.
 809   fs_.Create("otherfile", "");
 810   command_runner_.commands_ran_.clear();
 811   state_.Reset();
 812   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 813   EXPECT_EQ("", err);
 814   EXPECT_TRUE(builder_.AlreadyUpToDate());
 815
 816   // implicit dep missing, expect rebuild.
 817   fs_.RemoveFile("bar.h");
 818   command_runner_.commands_ran_.clear();
 819   state_.Reset();
 820   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 821   EXPECT_TRUE(builder_.Build(&err));
 822   ASSERT_EQ("", err);
 823   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 824 }
 825
 826 TEST_F(BuildTest, RebuildOrderOnlyDeps) {
 827   string err;
 828   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 829 "rule cc\n  command = cc $in\n"
 830 "rule true\n  command = true\n"
 831 "build oo.h: cc oo.h.in\n"
 832 "build foo.o: cc foo.c || oo.h\n"));
 833
 834   fs_.Create("foo.c", "");
 835   fs_.Create("oo.h.in", "");
 836
 837   // foo.o and order-only dep dirty, build both.
 838   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 839   EXPECT_TRUE(builder_.Build(&err));
 840   ASSERT_EQ("", err);
 841   ASSERT_EQ(2u, command_runner_.commands_ran_.size());
 842
 843   // all clean, no rebuild.
 844   command_runner_.commands_ran_.clear();
 845   state_.Reset();
 846   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 847   EXPECT_EQ("", err);
 848   EXPECT_TRUE(builder_.AlreadyUpToDate());
 849
 850   // order-only dep missing, build it only.
 851   fs_.RemoveFile("oo.h");
 852   command_runner_.commands_ran_.clear();
 853   state_.Reset();
 854   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 855   EXPECT_TRUE(builder_.Build(&err));
 856   ASSERT_EQ("", err);
 857   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 858   ASSERT_EQ("cc oo.h.in", command_runner_.commands_ran_[0]);
 859
 860   fs_.Tick();
 861
 862   // order-only dep dirty, build it only.
 863   fs_.Create("oo.h.in", "");
 864   command_runner_.commands_ran_.clear();
 865   state_.Reset();
 866   EXPECT_TRUE(builder_.AddTarget("foo.o", &err));
 867   EXPECT_TRUE(builder_.Build(&err));
 868   ASSERT_EQ("", err);
 869   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 870   ASSERT_EQ("cc oo.h.in", command_runner_.commands_ran_[0]);
 871 }
 872
 873 TEST_F(BuildTest, Phony) {
 874   string err;
 875   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 876 "build out: cat bar.cc\n"
 877 "build all: phony out\n"));
 878   fs_.Create("bar.cc", "");
 879
 880   EXPECT_TRUE(builder_.AddTarget("all", &err));
 881   ASSERT_EQ("", err);
 882
 883   // Only one command to run, because phony runs no command.
 884   EXPECT_FALSE(builder_.AlreadyUpToDate());
 885   EXPECT_TRUE(builder_.Build(&err));
 886   ASSERT_EQ("", err);
 887   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 888 }
 889
 890 TEST_F(BuildTest, PhonyNoWork) {
 891   string err;
 892   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 893 "build out: cat bar.cc\n"
 894 "build all: phony out\n"));
 895   fs_.Create("bar.cc", "");
 896   fs_.Create("out", "");
 897
 898   EXPECT_TRUE(builder_.AddTarget("all", &err));
 899   ASSERT_EQ("", err);
 900   EXPECT_TRUE(builder_.AlreadyUpToDate());
 901 }
 902
 903 TEST_F(BuildTest, Fail) {
 904   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 905 "rule fail\n"
 906 "  command = fail\n"
 907 "build out1: fail\n"));
 908
 909   string err;
 910   EXPECT_TRUE(builder_.AddTarget("out1", &err));
 911   ASSERT_EQ("", err);
 912
 913   EXPECT_FALSE(builder_.Build(&err));
 914   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
 915   ASSERT_EQ("subcommand failed", err);
 916 }
 917
 918 TEST_F(BuildTest, SwallowFailures) {
 919   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 920 "rule fail\n"
 921 "  command = fail\n"
 922 "build out1: fail\n"
 923 "build out2: fail\n"
 924 "build out3: fail\n"
 925 "build all: phony out1 out2 out3\n"));
 926
 927   // Swallow two failures, die on the third.
 928   config_.failures_allowed = 3;
 929
 930   string err;
 931   EXPECT_TRUE(builder_.AddTarget("all", &err));
 932   ASSERT_EQ("", err);
 933
 934   EXPECT_FALSE(builder_.Build(&err));
 935   ASSERT_EQ(3u, command_runner_.commands_ran_.size());
 936   ASSERT_EQ("subcommands failed", err);
 937 }
 938
 939 TEST_F(BuildTest, SwallowFailuresLimit) {
 940   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 941 "rule fail\n"
 942 "  command = fail\n"
 943 "build out1: fail\n"
 944 "build out2: fail\n"
 945 "build out3: fail\n"
 946 "build final: cat out1 out2 out3\n"));
 947
 948   // Swallow ten failures; we should stop before building final.
 949   config_.failures_allowed = 11;
 950
 951   string err;
 952   EXPECT_TRUE(builder_.AddTarget("final", &err));
 953   ASSERT_EQ("", err);
 954
 955   EXPECT_FALSE(builder_.Build(&err));
 956   ASSERT_EQ(3u, command_runner_.commands_ran_.size());
 957   ASSERT_EQ("cannot make progress due to previous errors", err);
 958 }
 959
 960 struct BuildWithLogTest : public BuildTest {
 961   BuildWithLogTest() {
 962     builder_.SetBuildLog(&build_log_);
 963   }
 964
 965   BuildLog build_log_;
 966 };
 967
 968 TEST_F(BuildWithLogTest, NotInLogButOnDisk) {
 969   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 970 "rule cc\n"
 971 "  command = cc\n"
 972 "build out1: cc in\n"));
 973
 974   // Create input/output that would be considered up to date when
 975   // not considering the command line hash.
 976   fs_.Create("in", "");
 977   fs_.Create("out1", "");
 978   string err;
 979
 980   // Because it's not in the log, it should not be up-to-date until
 981   // we build again.
 982   EXPECT_TRUE(builder_.AddTarget("out1", &err));
 983   EXPECT_FALSE(builder_.AlreadyUpToDate());
 984
 985   command_runner_.commands_ran_.clear();
 986   state_.Reset();
 987
 988   EXPECT_TRUE(builder_.AddTarget("out1", &err));
 989   EXPECT_TRUE(builder_.Build(&err));
 990   EXPECT_TRUE(builder_.AlreadyUpToDate());
 991 }
 992
 993 TEST_F(BuildWithLogTest, RestatTest) {
 994   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
 995 "rule true\n"
 996 "  command = true\n"
 997 "  restat = 1\n"
 998 "rule cc\n"
 999 "  command = cc\n"
1000 "  restat = 1\n"
1001 "build out1: cc in\n"
1002 "build out2: true out1\n"
1003 "build out3: cat out2\n"));
1004
1005   fs_.Create("out1", "");
1006   fs_.Create("out2", "");
1007   fs_.Create("out3", "");
1008
1009   fs_.Tick();
1010
1011   fs_.Create("in", "");
1012
1013   // Do a pre-build so that there's commands in the log for the outputs,
1014   // otherwise, the lack of an entry in the build log will cause out3 to rebuild
1015   // regardless of restat.
1016   string err;
1017   EXPECT_TRUE(builder_.AddTarget("out3", &err));
1018   ASSERT_EQ("", err);
1019   EXPECT_TRUE(builder_.Build(&err));
1020   ASSERT_EQ("", err);
1021   command_runner_.commands_ran_.clear();
1022   state_.Reset();
1023
1024   fs_.Tick();
1025
1026   fs_.Create("in", "");
1027   // "cc" touches out1, so we should build out2.  But because "true" does not
1028   // touch out2, we should cancel the build of out3.
1029   EXPECT_TRUE(builder_.AddTarget("out3", &err));
1030   ASSERT_EQ("", err);
1031   EXPECT_TRUE(builder_.Build(&err));
1032   ASSERT_EQ(2u, command_runner_.commands_ran_.size());
1033
1034   // If we run again, it should be a no-op, because the build log has recorded
1035   // that we've already built out2 with an input timestamp of 2 (from out1).
1036   command_runner_.commands_ran_.clear();
1037   state_.Reset();
1038   EXPECT_TRUE(builder_.AddTarget("out3", &err));
1039   ASSERT_EQ("", err);
1040   EXPECT_TRUE(builder_.AlreadyUpToDate());
1041
1042   fs_.Tick();
1043
1044   fs_.Create("in", "");
1045
1046   // The build log entry should not, however, prevent us from rebuilding out2
1047   // if out1 changes.
1048   command_runner_.commands_ran_.clear();
1049   state_.Reset();
1050   EXPECT_TRUE(builder_.AddTarget("out3", &err));
1051   ASSERT_EQ("", err);
1052   EXPECT_TRUE(builder_.Build(&err));
1053   ASSERT_EQ(2u, command_runner_.commands_ran_.size());
1054 }
1055
1056 TEST_F(BuildWithLogTest, RestatMissingFile) {
1057   // If a restat rule doesn't create its output, and the output didn't
1058   // exist before the rule was run, consider that behavior equivalent
1059   // to a rule that doesn't modify its existent output file.
1060
1061   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1062 "rule true\n"
1063 "  command = true\n"
1064 "  restat = 1\n"
1065 "rule cc\n"
1066 "  command = cc\n"
1067 "build out1: true in\n"
1068 "build out2: cc out1\n"));
1069
1070   fs_.Create("in", "");
1071   fs_.Create("out2", "");
1072
1073   // Do a pre-build so that there's commands in the log for the outputs,
1074   // otherwise, the lack of an entry in the build log will cause out2 to rebuild
1075   // regardless of restat.
1076   string err;
1077   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1078   ASSERT_EQ("", err);
1079   EXPECT_TRUE(builder_.Build(&err));
1080   ASSERT_EQ("", err);
1081   command_runner_.commands_ran_.clear();
1082   state_.Reset();
1083
1084   fs_.Tick();
1085   fs_.Create("in", "");
1086   fs_.Create("out2", "");
1087
1088   // Run a build, expect only the first command to run.
1089   // It doesn't touch its output (due to being the "true" command), so
1090   // we shouldn't run the dependent build.
1091   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1092   ASSERT_EQ("", err);
1093   EXPECT_TRUE(builder_.Build(&err));
1094   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1095 }
1096
1097 // Test scenario, in which an input file is removed, but output isn't changed
1098 // https://github.com/martine/ninja/issues/295
1099 TEST_F(BuildWithLogTest, RestatMissingInput) {
1100   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1101     "rule true\n"
1102     "  command = true\n"
1103     "  depfile = $out.d\n"
1104     "  restat = 1\n"
1105     "rule cc\n"
1106     "  command = cc\n"
1107     "build out1: true in\n"
1108     "build out2: cc out1\n"));
1109
1110   // Create all necessary files
1111   fs_.Create("in", "");
1112
1113   // The implicit dependencies and the depfile itself
1114   // are newer than the output
1115   TimeStamp restat_mtime = fs_.Tick();
1116   fs_.Create("out1.d", "out1: will.be.deleted restat.file\n");
1117   fs_.Create("will.be.deleted", "");
1118   fs_.Create("restat.file", "");
1119
1120   // Run the build, out1 and out2 get built
1121   string err;
1122   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1123   ASSERT_EQ("", err);
1124   EXPECT_TRUE(builder_.Build(&err));
1125   ASSERT_EQ(2u, command_runner_.commands_ran_.size());
1126
1127   // See that an entry in the logfile is created, capturing
1128   // the right mtime
1129   BuildLog::LogEntry * log_entry = build_log_.LookupByOutput("out1");
1130   ASSERT_TRUE(NULL != log_entry);
1131   ASSERT_EQ(restat_mtime, log_entry->restat_mtime);
1132
1133   // Now remove a file, referenced from depfile, so that target becomes
1134   // dirty, but the output does not change
1135   fs_.RemoveFile("will.be.deleted");
1136
1137   // Trigger the build again - only out1 gets built
1138   command_runner_.commands_ran_.clear();
1139   state_.Reset();
1140   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1141   ASSERT_EQ("", err);
1142   EXPECT_TRUE(builder_.Build(&err));
1143   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1144
1145   // Check that the logfile entry remains correctly set
1146   log_entry = build_log_.LookupByOutput("out1");
1147   ASSERT_TRUE(NULL != log_entry);
1148   ASSERT_EQ(restat_mtime, log_entry->restat_mtime);
1149 }
1150
1151 struct BuildDryRun : public BuildWithLogTest {
1152   BuildDryRun() {
1153     config_.dry_run = true;
1154   }
1155 };
1156
1157 TEST_F(BuildDryRun, AllCommandsShown) {
1158   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1159 "rule true\n"
1160 "  command = true\n"
1161 "  restat = 1\n"
1162 "rule cc\n"
1163 "  command = cc\n"
1164 "  restat = 1\n"
1165 "build out1: cc in\n"
1166 "build out2: true out1\n"
1167 "build out3: cat out2\n"));
1168
1169   fs_.Create("out1", "");
1170   fs_.Create("out2", "");
1171   fs_.Create("out3", "");
1172
1173   fs_.Tick();
1174
1175   fs_.Create("in", "");
1176
1177   // "cc" touches out1, so we should build out2.  But because "true" does not
1178   // touch out2, we should cancel the build of out3.
1179   string err;
1180   EXPECT_TRUE(builder_.AddTarget("out3", &err));
1181   ASSERT_EQ("", err);
1182   EXPECT_TRUE(builder_.Build(&err));
1183   ASSERT_EQ(3u, command_runner_.commands_ran_.size());
1184 }
1185
1186 // Test that RSP files are created when & where appropriate and deleted after
1187 // successful execution.
1188 TEST_F(BuildTest, RspFileSuccess)
1189 {
1190   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1191     "rule cat_rsp\n"
1192     "  command = cat $rspfile > $out\n"
1193     "  rspfile = $rspfile\n"
1194     "  rspfile_content = $long_command\n"
1195     "build out1: cat in\n"
1196     "build out2: cat_rsp in\n"
1197     "  rspfile = out2.rsp\n"
1198     "  long_command = Some very long command\n"));
1199
1200   fs_.Create("out1", "");
1201   fs_.Create("out2", "");
1202   fs_.Create("out3", "");
1203
1204   fs_.Tick();
1205
1206   fs_.Create("in", "");
1207
1208   string err;
1209   EXPECT_TRUE(builder_.AddTarget("out1", &err));
1210   ASSERT_EQ("", err);
1211   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1212   ASSERT_EQ("", err);
1213
1214   size_t files_created = fs_.files_created_.size();
1215   size_t files_removed = fs_.files_removed_.size();
1216
1217   EXPECT_TRUE(builder_.Build(&err));
1218   ASSERT_EQ(2u, command_runner_.commands_ran_.size()); // cat + cat_rsp
1219
1220   // The RSP file was created
1221   ASSERT_EQ(files_created + 1, fs_.files_created_.size());
1222   ASSERT_EQ(1u, fs_.files_created_.count("out2.rsp"));
1223
1224   // The RSP file was removed
1225   ASSERT_EQ(files_removed + 1, fs_.files_removed_.size());
1226   ASSERT_EQ(1u, fs_.files_removed_.count("out2.rsp"));
1227 }
1228
1229 // Test that RSP file is created but not removed for commands, which fail
1230 TEST_F(BuildTest, RspFileFailure) {
1231   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1232     "rule fail\n"
1233     "  command = fail\n"
1234     "  rspfile = $rspfile\n"
1235     "  rspfile_content = $long_command\n"
1236     "build out: fail in\n"
1237     "  rspfile = out.rsp\n"
1238     "  long_command = Another very long command\n"));
1239
1240   fs_.Create("out", "");
1241   fs_.Tick();
1242   fs_.Create("in", "");
1243
1244   string err;
1245   EXPECT_TRUE(builder_.AddTarget("out", &err));
1246   ASSERT_EQ("", err);
1247
1248   size_t files_created = fs_.files_created_.size();
1249   size_t files_removed = fs_.files_removed_.size();
1250
1251   EXPECT_FALSE(builder_.Build(&err));
1252   ASSERT_EQ("subcommand failed", err);
1253   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1254
1255   // The RSP file was created
1256   ASSERT_EQ(files_created + 1, fs_.files_created_.size());
1257   ASSERT_EQ(1u, fs_.files_created_.count("out.rsp"));
1258
1259   // The RSP file was NOT removed
1260   ASSERT_EQ(files_removed, fs_.files_removed_.size());
1261   ASSERT_EQ(0u, fs_.files_removed_.count("out.rsp"));
1262
1263   // The RSP file contains what it should
1264   ASSERT_EQ("Another very long command", fs_.files_["out.rsp"].contents);
1265 }
1266
1267 // Test that contens of the RSP file behaves like a regular part of
1268 // command line, i.e. triggers a rebuild if changed
1269 TEST_F(BuildWithLogTest, RspFileCmdLineChange) {
1270   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1271     "rule cat_rsp\n"
1272     "  command = cat $rspfile > $out\n"
1273     "  rspfile = $rspfile\n"
1274     "  rspfile_content = $long_command\n"
1275     "build out: cat_rsp in\n"
1276     "  rspfile = out.rsp\n"
1277     "  long_command = Original very long command\n"));
1278
1279   fs_.Create("out", "");
1280   fs_.Tick();
1281   fs_.Create("in", "");
1282
1283   string err;
1284   EXPECT_TRUE(builder_.AddTarget("out", &err));
1285   ASSERT_EQ("", err);
1286
1287   // 1. Build for the 1st time (-> populate log)
1288   EXPECT_TRUE(builder_.Build(&err));
1289   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1290
1291   // 2. Build again (no change)
1292   command_runner_.commands_ran_.clear();
1293   state_.Reset();
1294   EXPECT_TRUE(builder_.AddTarget("out", &err));
1295   EXPECT_EQ("", err);
1296   ASSERT_TRUE(builder_.AlreadyUpToDate());
1297
1298   // 3. Alter the entry in the logfile
1299   // (to simulate a change in the command line between 2 builds)
1300   BuildLog::LogEntry * log_entry = build_log_.LookupByOutput("out");
1301   ASSERT_TRUE(NULL != log_entry);
1302   ASSERT_NO_FATAL_FAILURE(AssertHash(
1303         "cat out.rsp > out;rspfile=Original very long command",
1304         log_entry->command_hash));
1305   log_entry->command_hash++;  // Change the command hash to something else.
1306   // Now expect the target to be rebuilt
1307   command_runner_.commands_ran_.clear();
1308   state_.Reset();
1309   EXPECT_TRUE(builder_.AddTarget("out", &err));
1310   EXPECT_EQ("", err);
1311   EXPECT_TRUE(builder_.Build(&err));
1312   EXPECT_EQ(1u, command_runner_.commands_ran_.size());
1313 }
1314
1315 TEST_F(BuildTest, InterruptCleanup) {
1316   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1317 "rule interrupt\n"
1318 "  command = interrupt\n"
1319 "rule touch-interrupt\n"
1320 "  command = touch-interrupt\n"
1321 "build out1: interrupt in1\n"
1322 "build out2: touch-interrupt in2\n"));
1323
1324   fs_.Create("out1", "");
1325   fs_.Create("out2", "");
1326   fs_.Tick();
1327   fs_.Create("in1", "");
1328   fs_.Create("in2", "");
1329
1330   // An untouched output of an interrupted command should be retained.
1331   string err;
1332   EXPECT_TRUE(builder_.AddTarget("out1", &err));
1333   EXPECT_EQ("", err);
1334   EXPECT_FALSE(builder_.Build(&err));
1335   EXPECT_EQ("interrupted by user", err);
1336   builder_.Cleanup();
1337   EXPECT_GT(fs_.Stat("out1"), 0);
1338   err = "";
1339
1340   // A touched output of an interrupted command should be deleted.
1341   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1342   EXPECT_EQ("", err);
1343   EXPECT_FALSE(builder_.Build(&err));
1344   EXPECT_EQ("interrupted by user", err);
1345   builder_.Cleanup();
1346   EXPECT_EQ(0, fs_.Stat("out2"));
1347 }
1348
1349 TEST_F(BuildTest, PhonyWithNoInputs) {
1350   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1351 "build nonexistent: phony\n"
1352 "build out1: cat || nonexistent\n"
1353 "build out2: cat nonexistent\n"));
1354   fs_.Create("out1", "");
1355   fs_.Create("out2", "");
1356
1357   // out1 should be up to date even though its input is dirty, because its
1358   // order-only dependency has nothing to do.
1359   string err;
1360   EXPECT_TRUE(builder_.AddTarget("out1", &err));
1361   ASSERT_EQ("", err);
1362   EXPECT_TRUE(builder_.AlreadyUpToDate());
1363
1364   // out2 should still be out of date though, because its input is dirty.
1365   err.clear();
1366   command_runner_.commands_ran_.clear();
1367   state_.Reset();
1368   EXPECT_TRUE(builder_.AddTarget("out2", &err));
1369   ASSERT_EQ("", err);
1370   EXPECT_TRUE(builder_.Build(&err));
1371   EXPECT_EQ("", err);
1372   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1373 }
1374
1375 TEST_F(BuildTest, DepsGccWithEmptyDepfileErrorsOut) {
1376   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1377 "rule cc\n"
1378 "  command = cc\n"
1379 "  deps = gcc\n"
1380 "build out: cc\n"));
1381   Dirty("out");
1382
1383   string err;
1384   EXPECT_TRUE(builder_.AddTarget("out", &err));
1385   ASSERT_EQ("", err);
1386   EXPECT_FALSE(builder_.AlreadyUpToDate());
1387
1388   EXPECT_FALSE(builder_.Build(&err));
1389   ASSERT_EQ("subcommand failed", err);
1390   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1391 }
1392
1393 TEST_F(BuildTest, StatusFormatReplacePlaceholder) {
1394   EXPECT_EQ("[%/s0/t0/r0/u0/f0]",
1395             status_.FormatProgressStatus("[%%/s%s/t%t/r%r/u%u/f%f]"));
1396 }
1397
1398 TEST_F(BuildTest, FailedDepsParse) {
1399   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1400 "build bad_deps.o: cat in1\n"
1401 "  deps = gcc\n"
1402 "  depfile = in1.d\n"));
1403
1404   string err;
1405   EXPECT_TRUE(builder_.AddTarget("bad_deps.o", &err));
1406   ASSERT_EQ("", err);
1407
1408   // These deps will fail to parse, as they should only have one
1409   // path to the left of the colon.
1410   fs_.Create("in1.d", "AAA BBB");
1411
1412   EXPECT_FALSE(builder_.Build(&err));
1413   EXPECT_EQ("subcommand failed", err);
1414 }
1415
1416 /// Tests of builds involving deps logs necessarily must span
1417 /// multiple builds.  We reuse methods on BuildTest but not the
1418 /// builder_ it sets up, because we want pristine objects for
1419 /// each build.
1420 struct BuildWithDepsLogTest : public BuildTest {
1421   BuildWithDepsLogTest() {}
1422
1423   virtual void SetUp() {
1424     BuildTest::SetUp();
1425
1426     temp_dir_.CreateAndEnter("BuildWithDepsLogTest");
1427   }
1428
1429   virtual void TearDown() {
1430     temp_dir_.Cleanup();
1431   }
1432
1433   ScopedTempDir temp_dir_;
1434
1435   /// Shadow parent class builder_ so we don't accidentally use it.
1436   void* builder_;
1437 };
1438
1439 /// Run a straightforwad build where the deps log is used.
1440 TEST_F(BuildWithDepsLogTest, Straightforward) {
1441   string err;
1442   // Note: in1 was created by the superclass SetUp().
1443   const char* manifest =
1444       "build out: cat in1\n"
1445       "  deps = gcc\n"
1446       "  depfile = in1.d\n";
1447   {
1448     State state;
1449     ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1450     ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1451
1452     // Run the build once, everything should be ok.
1453     DepsLog deps_log;
1454     ASSERT_TRUE(deps_log.OpenForWrite("ninja_deps", &err));
1455     ASSERT_EQ("", err);
1456
1457     Builder builder(&state, config_, NULL, &deps_log, &fs_);
1458     builder.command_runner_.reset(&command_runner_);
1459     EXPECT_TRUE(builder.AddTarget("out", &err));
1460     ASSERT_EQ("", err);
1461     fs_.Create("in1.d", "out: in2");
1462     EXPECT_TRUE(builder.Build(&err));
1463     EXPECT_EQ("", err);
1464
1465     // The deps file should have been removed.
1466     EXPECT_EQ(0, fs_.Stat("in1.d"));
1467     // Recreate it for the next step.
1468     fs_.Create("in1.d", "out: in2");
1469     deps_log.Close();
1470     builder.command_runner_.release();
1471   }
1472
1473   {
1474     State state;
1475     ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1476     ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1477
1478     // Touch the file only mentioned in the deps.
1479     fs_.Tick();
1480     fs_.Create("in2", "");
1481
1482     // Run the build again.
1483     DepsLog deps_log;
1484     ASSERT_TRUE(deps_log.Load("ninja_deps", &state, &err));
1485     ASSERT_TRUE(deps_log.OpenForWrite("ninja_deps", &err));
1486
1487     Builder builder(&state, config_, NULL, &deps_log, &fs_);
1488     builder.command_runner_.reset(&command_runner_);
1489     command_runner_.commands_ran_.clear();
1490     EXPECT_TRUE(builder.AddTarget("out", &err));
1491     ASSERT_EQ("", err);
1492     EXPECT_TRUE(builder.Build(&err));
1493     EXPECT_EQ("", err);
1494
1495     // We should have rebuilt the output due to in2 being
1496     // out of date.
1497     EXPECT_EQ(1u, command_runner_.commands_ran_.size());
1498
1499     builder.command_runner_.release();
1500   }
1501 }
1502
1503 /// Verify that obsolete dependency info causes a rebuild.
1504 /// 1) Run a successful build where everything has time t, record deps.
1505 /// 2) Move input/output to time t+1 -- despite files in alignment,
1506 ///    should still need to rebuild due to deps at older time.
1507 TEST_F(BuildWithDepsLogTest, ObsoleteDeps) {
1508   string err;
1509   // Note: in1 was created by the superclass SetUp().
1510   const char* manifest =
1511       "build out: cat in1\n"
1512       "  deps = gcc\n"
1513       "  depfile = in1.d\n";
1514   {
1515     // Run an ordinary build that gathers dependencies.
1516     fs_.Create("in1", "");
1517     fs_.Create("in1.d", "out: ");
1518
1519     State state;
1520     ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1521     ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1522
1523     // Run the build once, everything should be ok.
1524     DepsLog deps_log;
1525     ASSERT_TRUE(deps_log.OpenForWrite("ninja_deps", &err));
1526     ASSERT_EQ("", err);
1527
1528     Builder builder(&state, config_, NULL, &deps_log, &fs_);
1529     builder.command_runner_.reset(&command_runner_);
1530     EXPECT_TRUE(builder.AddTarget("out", &err));
1531     ASSERT_EQ("", err);
1532     EXPECT_TRUE(builder.Build(&err));
1533     EXPECT_EQ("", err);
1534
1535     deps_log.Close();
1536     builder.command_runner_.release();
1537   }
1538
1539   // Push all files one tick forward so that only the deps are out
1540   // of date.
1541   fs_.Tick();
1542   fs_.Create("in1", "");
1543   fs_.Create("out", "");
1544
1545   // The deps file should have been removed, so no need to timestamp it.
1546   EXPECT_EQ(0, fs_.Stat("in1.d"));
1547
1548   {
1549     State state;
1550     ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1551     ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1552
1553     DepsLog deps_log;
1554     ASSERT_TRUE(deps_log.Load("ninja_deps", &state, &err));
1555     ASSERT_TRUE(deps_log.OpenForWrite("ninja_deps", &err));
1556
1557     Builder builder(&state, config_, NULL, &deps_log, &fs_);
1558     builder.command_runner_.reset(&command_runner_);
1559     command_runner_.commands_ran_.clear();
1560     EXPECT_TRUE(builder.AddTarget("out", &err));
1561     ASSERT_EQ("", err);
1562
1563     // Recreate the deps file here because the build expects them to exist.
1564     fs_.Create("in1.d", "out: ");
1565
1566     EXPECT_TRUE(builder.Build(&err));
1567     EXPECT_EQ("", err);
1568
1569     // We should have rebuilt the output due to the deps being
1570     // out of date.
1571     EXPECT_EQ(1u, command_runner_.commands_ran_.size());
1572
1573     builder.command_runner_.release();
1574   }
1575 }
1576
1577 TEST_F(BuildWithDepsLogTest, DepsIgnoredInDryRun) {
1578   const char* manifest =
1579       "build out: cat in1\n"
1580       "  deps = gcc\n"
1581       "  depfile = in1.d\n";
1582
1583   fs_.Create("out", "");
1584   fs_.Tick();
1585   fs_.Create("in1", "");
1586
1587   State state;
1588   ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1589   ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1590
1591   // The deps log is NULL in dry runs.
1592   config_.dry_run = true;
1593   Builder builder(&state, config_, NULL, NULL, &fs_);
1594   builder.command_runner_.reset(&command_runner_);
1595   command_runner_.commands_ran_.clear();
1596
1597   string err;
1598   EXPECT_TRUE(builder.AddTarget("out", &err));
1599   ASSERT_EQ("", err);
1600   EXPECT_TRUE(builder.Build(&err));
1601   ASSERT_EQ(1u, command_runner_.commands_ran_.size());
1602
1603   builder.command_runner_.release();
1604 }
1605
1606 /// Check that a restat rule generating a header cancels compilations correctly.
1607 TEST_F(BuildTest, RestatDepfileDependency) {
1608   ASSERT_NO_FATAL_FAILURE(AssertParse(&state_,
1609 "rule true\n"
1610 "  command = true\n"  // Would be "write if out-of-date" in reality.
1611 "  restat = 1\n"
1612 "build header.h: true header.in\n"
1613 "build out: cat in1\n"
1614 "  depfile = in1.d\n"));
1615
1616   fs_.Create("header.h", "");
1617   fs_.Create("in1.d", "out: header.h");
1618   fs_.Tick();
1619   fs_.Create("header.in", "");
1620
1621   string err;
1622   EXPECT_TRUE(builder_.AddTarget("out", &err));
1623   ASSERT_EQ("", err);
1624   EXPECT_TRUE(builder_.Build(&err));
1625   EXPECT_EQ("", err);
1626 }
1627
1628 /// Check that a restat rule generating a header cancels compilations correctly,
1629 /// depslog case.
1630 TEST_F(BuildWithDepsLogTest, RestatDepfileDependencyDepsLog) {
1631   string err;
1632   // Note: in1 was created by the superclass SetUp().
1633   const char* manifest =
1634       "rule true\n"
1635       "  command = true\n"  // Would be "write if out-of-date" in reality.
1636       "  restat = 1\n"
1637       "build header.h: true header.in\n"
1638       "build out: cat in1\n"
1639       "  deps = gcc\n"
1640       "  depfile = in1.d\n";
1641   {
1642     State state;
1643     ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1644     ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1645
1646     // Run the build once, everything should be ok.
1647     DepsLog deps_log;
1648     ASSERT_TRUE(deps_log.OpenForWrite("ninja_deps", &err));
1649     ASSERT_EQ("", err);
1650
1651     Builder builder(&state, config_, NULL, &deps_log, &fs_);
1652     builder.command_runner_.reset(&command_runner_);
1653     EXPECT_TRUE(builder.AddTarget("out", &err));
1654     ASSERT_EQ("", err);
1655     fs_.Create("in1.d", "out: header.h");
1656     EXPECT_TRUE(builder.Build(&err));
1657     EXPECT_EQ("", err);
1658
1659     deps_log.Close();
1660     builder.command_runner_.release();
1661   }
1662
1663   {
1664     State state;
1665     ASSERT_NO_FATAL_FAILURE(AddCatRule(&state));
1666     ASSERT_NO_FATAL_FAILURE(AssertParse(&state, manifest));
1667
1668     // Touch the input of the restat rule.
1669     fs_.Tick();
1670     fs_.Create("header.in", "");
1671
1672     // Run the build again.
1673     DepsLog deps_log;
1674     ASSERT_TRUE(deps_log.Load("ninja_deps", &state, &err));
1675     ASSERT_TRUE(deps_log.OpenForWrite("ninja_deps", &err));
1676
1677     Builder builder(&state, config_, NULL, &deps_log, &fs_);
1678     builder.command_runner_.reset(&command_runner_);
1679     command_runner_.commands_ran_.clear();
1680     EXPECT_TRUE(builder.AddTarget("out", &err));
1681     ASSERT_EQ("", err);
1682     EXPECT_TRUE(builder.Build(&err));
1683     EXPECT_EQ("", err);
1684
1685     // Rule "true" should have run again, but the build of "out" should have
1686     // been cancelled due to restat propagating through the depfile header.
1687     EXPECT_EQ(1u, command_runner_.commands_ran_.size());
1688
1689     builder.command_runner_.release();
1690   }
1691 }