1 // Copyright 2011 the V8 project authors. All rights reserved.
2 // Redistribution and use in source and binary forms, with or without
3 // modification, are permitted provided that the following conditions are
6 // * Redistributions of source code must retain the above copyright
7 // notice, this list of conditions and the following disclaimer.
8 // * Redistributions in binary form must reproduce the above
9 // copyright notice, this list of conditions and the following
10 // disclaimer in the documentation and/or other materials provided
11 // with the distribution.
12 // * Neither the name of Google Inc. nor the names of its
13 // contributors may be used to endorse or promote products derived
14 // from this software without specific prior written permission.
16 // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
17 // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
18 // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
19 // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
20 // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
21 // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
22 // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
26 // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32 #include "conversions-inl.h"
41 double StringToDouble(UnicodeCache* unicode_cache,
42 const char* str, int flags, double empty_string_val) {
43 const char* end = str + StrLength(str);
44 return InternalStringToDouble(unicode_cache, str, end, flags,
49 double StringToDouble(UnicodeCache* unicode_cache,
50 Vector<const char> str,
52 double empty_string_val) {
53 const char* end = str.start() + str.length();
54 return InternalStringToDouble(unicode_cache, str.start(), end, flags,
58 double StringToDouble(UnicodeCache* unicode_cache,
59 Vector<const uc16> str,
61 double empty_string_val) {
62 const uc16* end = str.start() + str.length();
63 return InternalStringToDouble(unicode_cache, str.start(), end, flags,
68 const char* DoubleToCString(double v, Vector<char> buffer) {
69 switch (fpclassify(v)) {
70 case FP_NAN: return "NaN";
71 case FP_INFINITE: return (v < 0.0 ? "-Infinity" : "Infinity");
72 case FP_ZERO: return "0";
74 SimpleStringBuilder builder(buffer.start(), buffer.length());
77 const int kV8DtoaBufferCapacity = kBase10MaximalLength + 1;
78 char decimal_rep[kV8DtoaBufferCapacity];
81 DoubleToAscii(v, DTOA_SHORTEST, 0,
82 Vector<char>(decimal_rep, kV8DtoaBufferCapacity),
83 &sign, &length, &decimal_point);
85 if (sign) builder.AddCharacter('-');
87 if (length <= decimal_point && decimal_point <= 21) {
88 // ECMA-262 section 9.8.1 step 6.
89 builder.AddString(decimal_rep);
90 builder.AddPadding('0', decimal_point - length);
92 } else if (0 < decimal_point && decimal_point <= 21) {
93 // ECMA-262 section 9.8.1 step 7.
94 builder.AddSubstring(decimal_rep, decimal_point);
95 builder.AddCharacter('.');
96 builder.AddString(decimal_rep + decimal_point);
98 } else if (decimal_point <= 0 && decimal_point > -6) {
99 // ECMA-262 section 9.8.1 step 8.
100 builder.AddString("0.");
101 builder.AddPadding('0', -decimal_point);
102 builder.AddString(decimal_rep);
105 // ECMA-262 section 9.8.1 step 9 and 10 combined.
106 builder.AddCharacter(decimal_rep[0]);
108 builder.AddCharacter('.');
109 builder.AddString(decimal_rep + 1);
111 builder.AddCharacter('e');
112 builder.AddCharacter((decimal_point >= 0) ? '+' : '-');
113 int exponent = decimal_point - 1;
114 if (exponent < 0) exponent = -exponent;
115 builder.AddDecimalInteger(exponent);
117 return builder.Finalize();
123 const char* IntToCString(int n, Vector<char> buffer) {
124 bool negative = false;
126 // We must not negate the most negative int.
127 if (n == kMinInt) return DoubleToCString(n, buffer);
131 // Build the string backwards from the least significant digit.
132 int i = buffer.length();
135 buffer[--i] = '0' + (n % 10);
138 if (negative) buffer[--i] = '-';
139 return buffer.start() + i;
143 char* DoubleToFixedCString(double value, int f) {
144 const int kMaxDigitsBeforePoint = 21;
145 const double kFirstNonFixed = 1e21;
146 const int kMaxDigitsAfterPoint = 20;
148 ASSERT(f <= kMaxDigitsAfterPoint);
150 bool negative = false;
151 double abs_value = value;
157 // If abs_value has more than kMaxDigitsBeforePoint digits before the point
158 // use the non-fixed conversion routine.
159 if (abs_value >= kFirstNonFixed) {
161 Vector<char> buffer(arr, ARRAY_SIZE(arr));
162 return StrDup(DoubleToCString(value, buffer));
165 // Find a sufficiently precise decimal representation of n.
168 // Add space for the '\0' byte.
169 const int kDecimalRepCapacity =
170 kMaxDigitsBeforePoint + kMaxDigitsAfterPoint + 1;
171 char decimal_rep[kDecimalRepCapacity];
172 int decimal_rep_length;
173 DoubleToAscii(value, DTOA_FIXED, f,
174 Vector<char>(decimal_rep, kDecimalRepCapacity),
175 &sign, &decimal_rep_length, &decimal_point);
177 // Create a representation that is padded with zeros if needed.
178 int zero_prefix_length = 0;
179 int zero_postfix_length = 0;
181 if (decimal_point <= 0) {
182 zero_prefix_length = -decimal_point + 1;
186 if (zero_prefix_length + decimal_rep_length < decimal_point + f) {
187 zero_postfix_length = decimal_point + f - decimal_rep_length -
191 unsigned rep_length =
192 zero_prefix_length + decimal_rep_length + zero_postfix_length;
193 SimpleStringBuilder rep_builder(rep_length + 1);
194 rep_builder.AddPadding('0', zero_prefix_length);
195 rep_builder.AddString(decimal_rep);
196 rep_builder.AddPadding('0', zero_postfix_length);
197 char* rep = rep_builder.Finalize();
199 // Create the result string by appending a minus and putting in a
200 // decimal point if needed.
201 unsigned result_size = decimal_point + f + 2;
202 SimpleStringBuilder builder(result_size + 1);
203 if (negative) builder.AddCharacter('-');
204 builder.AddSubstring(rep, decimal_point);
206 builder.AddCharacter('.');
207 builder.AddSubstring(rep + decimal_point, f);
210 return builder.Finalize();
214 static char* CreateExponentialRepresentation(char* decimal_rep,
217 int significant_digits) {
218 bool negative_exponent = false;
220 negative_exponent = true;
221 exponent = -exponent;
224 // Leave room in the result for appending a minus, for a period, the
225 // letter 'e', a minus or a plus depending on the exponent, and a
226 // three digit exponent.
227 unsigned result_size = significant_digits + 7;
228 SimpleStringBuilder builder(result_size + 1);
230 if (negative) builder.AddCharacter('-');
231 builder.AddCharacter(decimal_rep[0]);
232 if (significant_digits != 1) {
233 builder.AddCharacter('.');
234 builder.AddString(decimal_rep + 1);
235 int rep_length = StrLength(decimal_rep);
236 builder.AddPadding('0', significant_digits - rep_length);
239 builder.AddCharacter('e');
240 builder.AddCharacter(negative_exponent ? '-' : '+');
241 builder.AddDecimalInteger(exponent);
242 return builder.Finalize();
247 char* DoubleToExponentialCString(double value, int f) {
248 const int kMaxDigitsAfterPoint = 20;
249 // f might be -1 to signal that f was undefined in JavaScript.
250 ASSERT(f >= -1 && f <= kMaxDigitsAfterPoint);
252 bool negative = false;
258 // Find a sufficiently precise decimal representation of n.
261 // f corresponds to the digits after the point. There is always one digit
262 // before the point. The number of requested_digits equals hence f + 1.
263 // And we have to add one character for the null-terminator.
264 const int kV8DtoaBufferCapacity = kMaxDigitsAfterPoint + 1 + 1;
265 // Make sure that the buffer is big enough, even if we fall back to the
266 // shortest representation (which happens when f equals -1).
267 ASSERT(kBase10MaximalLength <= kMaxDigitsAfterPoint + 1);
268 char decimal_rep[kV8DtoaBufferCapacity];
269 int decimal_rep_length;
272 DoubleToAscii(value, DTOA_SHORTEST, 0,
273 Vector<char>(decimal_rep, kV8DtoaBufferCapacity),
274 &sign, &decimal_rep_length, &decimal_point);
275 f = decimal_rep_length - 1;
277 DoubleToAscii(value, DTOA_PRECISION, f + 1,
278 Vector<char>(decimal_rep, kV8DtoaBufferCapacity),
279 &sign, &decimal_rep_length, &decimal_point);
281 ASSERT(decimal_rep_length > 0);
282 ASSERT(decimal_rep_length <= f + 1);
284 int exponent = decimal_point - 1;
286 CreateExponentialRepresentation(decimal_rep, exponent, negative, f+1);
292 char* DoubleToPrecisionCString(double value, int p) {
293 const int kMinimalDigits = 1;
294 const int kMaximalDigits = 21;
295 ASSERT(p >= kMinimalDigits && p <= kMaximalDigits);
298 bool negative = false;
304 // Find a sufficiently precise decimal representation of n.
307 // Add one for the terminating null character.
308 const int kV8DtoaBufferCapacity = kMaximalDigits + 1;
309 char decimal_rep[kV8DtoaBufferCapacity];
310 int decimal_rep_length;
312 DoubleToAscii(value, DTOA_PRECISION, p,
313 Vector<char>(decimal_rep, kV8DtoaBufferCapacity),
314 &sign, &decimal_rep_length, &decimal_point);
315 ASSERT(decimal_rep_length <= p);
317 int exponent = decimal_point - 1;
321 if (exponent < -6 || exponent >= p) {
323 CreateExponentialRepresentation(decimal_rep, exponent, negative, p);
325 // Use fixed notation.
327 // Leave room in the result for appending a minus, a period and in
328 // the case where decimal_point is not positive for a zero in
329 // front of the period.
330 unsigned result_size = (decimal_point <= 0)
331 ? -decimal_point + p + 3
333 SimpleStringBuilder builder(result_size + 1);
334 if (negative) builder.AddCharacter('-');
335 if (decimal_point <= 0) {
336 builder.AddString("0.");
337 builder.AddPadding('0', -decimal_point);
338 builder.AddString(decimal_rep);
339 builder.AddPadding('0', p - decimal_rep_length);
341 const int m = Min(decimal_rep_length, decimal_point);
342 builder.AddSubstring(decimal_rep, m);
343 builder.AddPadding('0', decimal_point - decimal_rep_length);
344 if (decimal_point < p) {
345 builder.AddCharacter('.');
346 const int extra = negative ? 2 : 1;
347 if (decimal_rep_length > decimal_point) {
348 const int len = StrLength(decimal_rep + decimal_point);
349 const int n = Min(len, p - (builder.position() - extra));
350 builder.AddSubstring(decimal_rep + decimal_point, n);
352 builder.AddPadding('0', extra + (p - builder.position()));
355 result = builder.Finalize();
362 char* DoubleToRadixCString(double value, int radix) {
363 ASSERT(radix >= 2 && radix <= 36);
365 // Character array used for conversion.
366 static const char chars[] = "0123456789abcdefghijklmnopqrstuvwxyz";
368 // Buffer for the integer part of the result. 1024 chars is enough
369 // for max integer value in radix 2. We need room for a sign too.
370 static const int kBufferSize = 1100;
371 char integer_buffer[kBufferSize];
372 integer_buffer[kBufferSize - 1] = '\0';
374 // Buffer for the decimal part of the result. We only generate up
375 // to kBufferSize - 1 chars for the decimal part.
376 char decimal_buffer[kBufferSize];
377 decimal_buffer[kBufferSize - 1] = '\0';
379 // Make sure the value is positive.
380 bool is_negative = value < 0.0;
381 if (is_negative) value = -value;
383 // Get the integer part and the decimal part.
384 double integer_part = floor(value);
385 double decimal_part = value - integer_part;
387 // Convert the integer part starting from the back. Always generate
388 // at least one digit.
389 int integer_pos = kBufferSize - 2;
391 integer_buffer[integer_pos--] =
392 chars[static_cast<int>(fmod(integer_part, radix))];
393 integer_part /= radix;
394 } while (integer_part >= 1.0);
396 ASSERT(integer_pos > 0);
397 // Add sign if needed.
398 if (is_negative) integer_buffer[integer_pos--] = '-';
400 // Convert the decimal part. Repeatedly multiply by the radix to
401 // generate the next char. Never generate more than kBufferSize - 1
404 // TODO(1093998): We will often generate a full decimal_buffer of
405 // chars because hitting zero will often not happen. The right
406 // solution would be to continue until the string representation can
407 // be read back and yield the original value. To implement this
408 // efficiently, we probably have to modify dtoa.
410 while ((decimal_part > 0.0) && (decimal_pos < kBufferSize - 1)) {
411 decimal_part *= radix;
412 decimal_buffer[decimal_pos++] =
413 chars[static_cast<int>(floor(decimal_part))];
414 decimal_part -= floor(decimal_part);
416 decimal_buffer[decimal_pos] = '\0';
418 // Compute the result size.
419 int integer_part_size = kBufferSize - 2 - integer_pos;
420 // Make room for zero termination.
421 unsigned result_size = integer_part_size + decimal_pos;
422 // If the number has a decimal part, leave room for the period.
423 if (decimal_pos > 0) result_size++;
424 // Allocate result and fill in the parts.
425 SimpleStringBuilder builder(result_size + 1);
426 builder.AddSubstring(integer_buffer + integer_pos + 1, integer_part_size);
427 if (decimal_pos > 0) builder.AddCharacter('.');
428 builder.AddSubstring(decimal_buffer, decimal_pos);
429 return builder.Finalize();
432 } } // namespace v8::internal