spl/Makefile

   1 #
   2 # (C) Copyright 2000-2011
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # (C) Copyright 2011
   6 # Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
   7 #
   8 # (C) Copyright 2011
   9 # Texas Instruments Incorporated - http://www.ti.com/
  10 # Aneesh V <aneesh@ti.com>
  11 #
  12 # This file is released under the terms of GPL v2 and any later version.
  13 # See the file COPYING in the root directory of the source tree for details.
  14 #
  15 # Based on top-level Makefile.
  16 #
  17
  18 CONFIG_SPL_BUILD := y
  19 export CONFIG_SPL_BUILD
  20
  21 include $(TOPDIR)/config.mk
  22
  23 # We want the final binaries in this directory
  24 obj := $(OBJTREE)/spl/
  25
  26 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(SRCTREE)/board/$(VENDOR)/common/Makefile),y,n)
  27
  28 ifdef   CONFIG_SPL_START_S_PATH
  29 START_PATH := $(subst ",,$(CONFIG_SPL_START_S_PATH))
  30 else
  31 START_PATH := $(CPUDIR)
  32 endif
  33
  34 START := $(START_PATH)/start.o
  35
  36 LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
  37 LIBS-y += $(CPUDIR)/lib$(CPU).o
  38 ifdef SOC
  39 LIBS-y += $(CPUDIR)/$(SOC)/lib$(SOC).o
  40 endif
  41 LIBS-y += board/$(BOARDDIR)/lib$(BOARD).o
  42 LIBS-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/lib$(VENDOR).o
  43
  44 LIBS-$(CONFIG_SPL_FRAMEWORK) += common/spl/libspl.o
  45 LIBS-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/libcommon.o
  46 LIBS-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/libdisk.o
  47 LIBS-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/libi2c.o
  48 LIBS-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/libgpio.o
  49 LIBS-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/libmmc.o
  50 LIBS-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/libserial.o
  51 LIBS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/libspi_flash.o
  52 LIBS-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/libspi.o
  53 LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
  54 LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
  55 LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
  56 LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
  57 LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o
  58 LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o
  59 LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o
  60 LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
  61 LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
  62 LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
  63
  64 ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
  65 LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
  66 endif
  67
  68 ifeq ($(SOC),tegra20)
  69 LIBS-y += arch/$(ARCH)/cpu/$(SOC)-common/lib$(SOC)-common.o
  70 endif
  71
  72 # Add GCC lib
  73 ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
  74 PLATFORM_LIBGCC = $(SPLTREE)/arch/$(ARCH)/lib/libgcc.o
  75 PLATFORM_LIBS := $(filter-out %/libgcc.o, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
  76 endif
  77
  78 START := $(addprefix $(SPLTREE)/,$(START))
  79 LIBS := $(addprefix $(SPLTREE)/,$(sort $(LIBS-y)))
  80
  81 __START := $(subst $(obj),,$(START))
  82 __LIBS := $(subst $(obj),,$(LIBS))
  83
  84 # Linker Script
  85 ifdef CONFIG_SPL_LDSCRIPT
  86 # need to strip off double quotes
  87 LDSCRIPT := $(addprefix $(SRCTREE)/,$(subst ",,$(CONFIG_SPL_LDSCRIPT)))
  88 endif
  89
  90 ifeq ($(wildcard $(LDSCRIPT)),)
  91         LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-spl.lds
  92 endif
  93 ifeq ($(wildcard $(LDSCRIPT)),)
  94         LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-spl.lds
  95 endif
  96 ifeq ($(wildcard $(LDSCRIPT)),)
  97         LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
  98 endif
  99 ifeq ($(wildcard $(LDSCRIPT)),)
 100 $(error could not find linker script)
 101 endif
 102
 103 # Special flags for CPP when processing the linker script.
 104 # Pass the version down so we can handle backwards compatibility
 105 # on the fly.
 106 LDPPFLAGS += \
 107         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 108         -include $(OBJTREE)/include/config.h \
 109         -DCPUDIR=$(CPUDIR) \
 110         $(shell $(LD) --version | \
 111           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 112
 113 ifdef CONFIG_OMAP
 114 $(OBJTREE)/MLO: $(obj)u-boot-spl.bin
 115         $(OBJTREE)/tools/mkimage -T omapimage \
 116                 -a $(CONFIG_SPL_TEXT_BASE) -d $< $@
 117 endif
 118 ifdef CONFIG_AM33XX
 119 $(OBJTREE)/MLO: $(obj)u-boot-spl.bin
 120         $(OBJTREE)/tools/mkimage -T omapimage \
 121                 -a $(CONFIG_SPL_TEXT_BASE) -d $< $@
 122 endif
 123
 124 ALL-y   += $(obj)u-boot-spl.bin
 125
 126 ifdef CONFIG_SAMSUNG
 127 ALL-y   += $(obj)$(BOARD)-spl.bin
 128 endif
 129
 130 all:    $(ALL-y)
 131
 132 ifdef CONFIG_SAMSUNG
 133 $(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin
 134         $(OBJTREE)/tools/mk$(BOARD)spl \
 135                 $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin
 136 endif
 137
 138 $(obj)u-boot-spl.bin:   $(obj)u-boot-spl
 139         $(OBJCOPY) $(OBJCFLAGS) -O binary $< $@
 140
 141 GEN_UBOOT = \
 142         cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $(__START) \
 143                 --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 144                 -Map u-boot-spl.map -o u-boot-spl
 145
 146 $(obj)u-boot-spl:       depend $(START) $(LIBS) $(obj)u-boot-spl.lds
 147         $(GEN_UBOOT)
 148
 149 $(START):       depend
 150         $(MAKE) -C $(SRCTREE)/$(START_PATH) $@
 151
 152 $(LIBS):        depend
 153         $(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@))
 154
 155 $(obj)u-boot-spl.lds: $(LDSCRIPT) depend
 156         $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - < $< > $@
 157
 158 depend: $(obj).depend
 159 .PHONY: depend
 160
 161 # defines $(obj).depend target
 162 include $(SRCTREE)/rules.mk