2 * sgtl5000.c -- SGTL5000 ALSA SoC Audio driver
4 * Copyright 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/module.h>
12 #include <linux/moduleparam.h>
13 #include <linux/init.h>
14 #include <linux/delay.h>
15 #include <linux/slab.h>
17 #include <linux/i2c.h>
18 #include <linux/clk.h>
19 #include <linux/regmap.h>
20 #include <linux/regulator/driver.h>
21 #include <linux/regulator/machine.h>
22 #include <linux/regulator/consumer.h>
23 #include <linux/of_device.h>
24 #include <sound/core.h>
25 #include <sound/tlv.h>
26 #include <sound/pcm.h>
27 #include <sound/pcm_params.h>
28 #include <sound/soc.h>
29 #include <sound/soc-dapm.h>
30 #include <sound/initval.h>
34 #define SGTL5000_DAP_REG_OFFSET 0x0100
35 #define SGTL5000_MAX_REG_OFFSET 0x013A
37 /* default value of sgtl5000 registers */
38 static const struct reg_default sgtl5000_reg_defaults[] = {
39 { SGTL5000_CHIP_CLK_CTRL, 0x0008 },
40 { SGTL5000_CHIP_I2S_CTRL, 0x0010 },
41 { SGTL5000_CHIP_SSS_CTRL, 0x0010 },
42 { SGTL5000_CHIP_DAC_VOL, 0x3c3c },
43 { SGTL5000_CHIP_PAD_STRENGTH, 0x015f },
44 { SGTL5000_CHIP_ANA_HP_CTRL, 0x1818 },
45 { SGTL5000_CHIP_ANA_CTRL, 0x0111 },
46 { SGTL5000_CHIP_LINE_OUT_VOL, 0x0404 },
47 { SGTL5000_CHIP_ANA_POWER, 0x7060 },
48 { SGTL5000_CHIP_PLL_CTRL, 0x5000 },
49 { SGTL5000_DAP_BASS_ENHANCE, 0x0040 },
50 { SGTL5000_DAP_BASS_ENHANCE_CTRL, 0x051f },
51 { SGTL5000_DAP_SURROUND, 0x0040 },
52 { SGTL5000_DAP_EQ_BASS_BAND0, 0x002f },
53 { SGTL5000_DAP_EQ_BASS_BAND1, 0x002f },
54 { SGTL5000_DAP_EQ_BASS_BAND2, 0x002f },
55 { SGTL5000_DAP_EQ_BASS_BAND3, 0x002f },
56 { SGTL5000_DAP_EQ_BASS_BAND4, 0x002f },
57 { SGTL5000_DAP_MAIN_CHAN, 0x8000 },
58 { SGTL5000_DAP_AVC_CTRL, 0x0510 },
59 { SGTL5000_DAP_AVC_THRESHOLD, 0x1473 },
60 { SGTL5000_DAP_AVC_ATTACK, 0x0028 },
61 { SGTL5000_DAP_AVC_DECAY, 0x0050 },
64 /* regulator supplies for sgtl5000, VDDD is an optional external supply */
65 enum sgtl5000_regulator_supplies {
72 /* vddd is optional supply */
73 static const char *supply_names[SGTL5000_SUPPLY_NUM] = {
79 #define LDO_CONSUMER_NAME "VDDD_LDO"
80 #define LDO_VOLTAGE 1200000
82 static struct regulator_consumer_supply ldo_consumer[] = {
83 REGULATOR_SUPPLY(LDO_CONSUMER_NAME, NULL),
86 static struct regulator_init_data ldo_init_data = {
90 .valid_modes_mask = REGULATOR_MODE_NORMAL,
91 .valid_ops_mask = REGULATOR_CHANGE_STATUS,
93 .num_consumer_supplies = 1,
94 .consumer_supplies = &ldo_consumer[0],
98 * sgtl5000 internal ldo regulator,
99 * enabled when VDDD not provided
101 struct ldo_regulator {
102 struct regulator_desc desc;
103 struct regulator_dev *dev;
109 /* sgtl5000 private structure in codec */
110 struct sgtl5000_priv {
111 int sysclk; /* sysclk rate */
112 int master; /* i2s master or not */
113 int fmt; /* i2s data format */
114 struct regulator_bulk_data supplies[SGTL5000_SUPPLY_NUM];
115 struct ldo_regulator *ldo;
116 struct regmap *regmap;
121 * mic_bias power on/off share the same register bits with
122 * output impedance of mic bias, when power on mic bias, we
123 * need reclaim it to impedance value.
129 static int mic_bias_event(struct snd_soc_dapm_widget *w,
130 struct snd_kcontrol *kcontrol, int event)
133 case SND_SOC_DAPM_POST_PMU:
134 /* change mic bias resistor to 4Kohm */
135 snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
136 SGTL5000_BIAS_R_MASK,
137 SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
140 case SND_SOC_DAPM_PRE_PMD:
141 snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
142 SGTL5000_BIAS_R_MASK, 0);
149 * As manual described, ADC/DAC only works when VAG powerup,
150 * So enabled VAG before ADC/DAC up.
151 * In power down case, we need wait 400ms when vag fully ramped down.
153 static int power_vag_event(struct snd_soc_dapm_widget *w,
154 struct snd_kcontrol *kcontrol, int event)
157 case SND_SOC_DAPM_POST_PMU:
158 snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
159 SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
162 case SND_SOC_DAPM_PRE_PMD:
163 snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,
164 SGTL5000_VAG_POWERUP, 0);
174 /* input sources for ADC */
175 static const char *adc_mux_text[] = {
179 static const struct soc_enum adc_enum =
180 SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 2, 2, adc_mux_text);
182 static const struct snd_kcontrol_new adc_mux =
183 SOC_DAPM_ENUM("Capture Mux", adc_enum);
185 /* input sources for DAC */
186 static const char *dac_mux_text[] = {
190 static const struct soc_enum dac_enum =
191 SOC_ENUM_SINGLE(SGTL5000_CHIP_ANA_CTRL, 6, 2, dac_mux_text);
193 static const struct snd_kcontrol_new dac_mux =
194 SOC_DAPM_ENUM("Headphone Mux", dac_enum);
196 static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = {
197 SND_SOC_DAPM_INPUT("LINE_IN"),
198 SND_SOC_DAPM_INPUT("MIC_IN"),
200 SND_SOC_DAPM_OUTPUT("HP_OUT"),
201 SND_SOC_DAPM_OUTPUT("LINE_OUT"),
203 SND_SOC_DAPM_SUPPLY("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
205 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
207 SND_SOC_DAPM_PGA("HP", SGTL5000_CHIP_ANA_POWER, 4, 0, NULL, 0),
208 SND_SOC_DAPM_PGA("LO", SGTL5000_CHIP_ANA_POWER, 0, 0, NULL, 0),
210 SND_SOC_DAPM_MUX("Capture Mux", SND_SOC_NOPM, 0, 0, &adc_mux),
211 SND_SOC_DAPM_MUX("Headphone Mux", SND_SOC_NOPM, 0, 0, &dac_mux),
213 /* aif for i2s input */
214 SND_SOC_DAPM_AIF_IN("AIFIN", "Playback",
215 0, SGTL5000_CHIP_DIG_POWER,
218 /* aif for i2s output */
219 SND_SOC_DAPM_AIF_OUT("AIFOUT", "Capture",
220 0, SGTL5000_CHIP_DIG_POWER,
223 SND_SOC_DAPM_ADC("ADC", "Capture", SGTL5000_CHIP_ANA_POWER, 1, 0),
224 SND_SOC_DAPM_DAC("DAC", "Playback", SGTL5000_CHIP_ANA_POWER, 3, 0),
226 SND_SOC_DAPM_PRE("VAG_POWER_PRE", power_vag_event),
227 SND_SOC_DAPM_POST("VAG_POWER_POST", power_vag_event),
230 /* routes for sgtl5000 */
231 static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = {
232 {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
233 {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
235 {"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */
236 {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
238 {"DAC", NULL, "AIFIN"}, /* i2s-->dac,skip audio mux */
239 {"Headphone Mux", "DAC", "DAC"}, /* dac --> hp_mux */
240 {"LO", NULL, "DAC"}, /* dac --> line_out */
242 {"Headphone Mux", "LINE_IN", "LINE_IN"},/* line_in --> hp_mux */
243 {"HP", NULL, "Headphone Mux"}, /* hp_mux --> hp */
245 {"LINE_OUT", NULL, "LO"},
246 {"HP_OUT", NULL, "HP"},
249 /* custom function to fetch info of PCM playback volume */
250 static int dac_info_volsw(struct snd_kcontrol *kcontrol,
251 struct snd_ctl_elem_info *uinfo)
253 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
255 uinfo->value.integer.min = 0;
256 uinfo->value.integer.max = 0xfc - 0x3c;
261 * custom function to get of PCM playback volume
263 * dac volume register
264 * 15-------------8-7--------------0
265 * | R channel vol | L channel vol |
266 * -------------------------------
268 * PCM volume with 0.5017 dB steps from 0 to -90 dB
270 * register values map to dB
271 * 0x3B and less = Reserved
275 * 0xFC and greater = Muted
277 * register value map to userspace value
279 * register value 0x3c(0dB) 0xf0(-90dB)0xfc
280 * ------------------------------
281 * userspace value 0xc0 0
283 static int dac_get_volsw(struct snd_kcontrol *kcontrol,
284 struct snd_ctl_elem_value *ucontrol)
286 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
291 reg = snd_soc_read(codec, SGTL5000_CHIP_DAC_VOL);
293 /* get left channel volume */
294 l = (reg & SGTL5000_DAC_VOL_LEFT_MASK) >> SGTL5000_DAC_VOL_LEFT_SHIFT;
296 /* get right channel volume */
297 r = (reg & SGTL5000_DAC_VOL_RIGHT_MASK) >> SGTL5000_DAC_VOL_RIGHT_SHIFT;
299 /* make sure value fall in (0x3c,0xfc) */
300 l = clamp(l, 0x3c, 0xfc);
301 r = clamp(r, 0x3c, 0xfc);
303 /* invert it and map to userspace value */
307 ucontrol->value.integer.value[0] = l;
308 ucontrol->value.integer.value[1] = r;
314 * custom function to put of PCM playback volume
316 * dac volume register
317 * 15-------------8-7--------------0
318 * | R channel vol | L channel vol |
319 * -------------------------------
321 * PCM volume with 0.5017 dB steps from 0 to -90 dB
323 * register values map to dB
324 * 0x3B and less = Reserved
328 * 0xFC and greater = Muted
330 * userspace value map to register value
332 * userspace value 0xc0 0
333 * ------------------------------
334 * register value 0x3c(0dB) 0xf0(-90dB)0xfc
336 static int dac_put_volsw(struct snd_kcontrol *kcontrol,
337 struct snd_ctl_elem_value *ucontrol)
339 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
344 l = ucontrol->value.integer.value[0];
345 r = ucontrol->value.integer.value[1];
347 /* make sure userspace volume fall in (0, 0xfc-0x3c) */
348 l = clamp(l, 0, 0xfc - 0x3c);
349 r = clamp(r, 0, 0xfc - 0x3c);
351 /* invert it, get the value can be set to register */
355 /* shift to get the register value */
356 reg = l << SGTL5000_DAC_VOL_LEFT_SHIFT |
357 r << SGTL5000_DAC_VOL_RIGHT_SHIFT;
359 snd_soc_write(codec, SGTL5000_CHIP_DAC_VOL, reg);
364 static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0);
366 /* tlv for mic gain, 0db 20db 30db 40db */
367 static const unsigned int mic_gain_tlv[] = {
368 TLV_DB_RANGE_HEAD(2),
369 0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
370 1, 3, TLV_DB_SCALE_ITEM(2000, 1000, 0),
373 /* tlv for hp volume, -51.5db to 12.0db, step .5db */
374 static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0);
376 static const struct snd_kcontrol_new sgtl5000_snd_controls[] = {
377 /* SOC_DOUBLE_S8_TLV with invert */
379 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
380 .name = "PCM Playback Volume",
381 .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
382 SNDRV_CTL_ELEM_ACCESS_READWRITE,
383 .info = dac_info_volsw,
384 .get = dac_get_volsw,
385 .put = dac_put_volsw,
388 SOC_DOUBLE("Capture Volume", SGTL5000_CHIP_ANA_ADC_CTRL, 0, 4, 0xf, 0),
389 SOC_SINGLE_TLV("Capture Attenuate Switch (-6dB)",
390 SGTL5000_CHIP_ANA_ADC_CTRL,
391 8, 2, 0, capture_6db_attenuate),
392 SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0),
394 SOC_DOUBLE_TLV("Headphone Playback Volume",
395 SGTL5000_CHIP_ANA_HP_CTRL,
399 SOC_SINGLE("Headphone Playback ZC Switch", SGTL5000_CHIP_ANA_CTRL,
402 SOC_SINGLE_TLV("Mic Volume", SGTL5000_CHIP_MIC_CTRL,
403 0, 3, 0, mic_gain_tlv),
406 /* mute the codec used by alsa core */
407 static int sgtl5000_digital_mute(struct snd_soc_dai *codec_dai, int mute)
409 struct snd_soc_codec *codec = codec_dai->codec;
410 u16 adcdac_ctrl = SGTL5000_DAC_MUTE_LEFT | SGTL5000_DAC_MUTE_RIGHT;
412 snd_soc_update_bits(codec, SGTL5000_CHIP_ADCDAC_CTRL,
413 adcdac_ctrl, mute ? adcdac_ctrl : 0);
418 /* set codec format */
419 static int sgtl5000_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt)
421 struct snd_soc_codec *codec = codec_dai->codec;
422 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
425 sgtl5000->master = 0;
427 * i2s clock and frame master setting.
429 * - clock and frame slave,
430 * - clock and frame master
432 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
433 case SND_SOC_DAIFMT_CBS_CFS:
435 case SND_SOC_DAIFMT_CBM_CFM:
436 i2sctl |= SGTL5000_I2S_MASTER;
437 sgtl5000->master = 1;
443 /* setting i2s data format */
444 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
445 case SND_SOC_DAIFMT_DSP_A:
446 i2sctl |= SGTL5000_I2S_MODE_PCM;
448 case SND_SOC_DAIFMT_DSP_B:
449 i2sctl |= SGTL5000_I2S_MODE_PCM;
450 i2sctl |= SGTL5000_I2S_LRALIGN;
452 case SND_SOC_DAIFMT_I2S:
453 i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
455 case SND_SOC_DAIFMT_RIGHT_J:
456 i2sctl |= SGTL5000_I2S_MODE_RJ;
457 i2sctl |= SGTL5000_I2S_LRPOL;
459 case SND_SOC_DAIFMT_LEFT_J:
460 i2sctl |= SGTL5000_I2S_MODE_I2S_LJ;
461 i2sctl |= SGTL5000_I2S_LRALIGN;
467 sgtl5000->fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
469 /* Clock inversion */
470 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
471 case SND_SOC_DAIFMT_NB_NF:
473 case SND_SOC_DAIFMT_IB_NF:
474 i2sctl |= SGTL5000_I2S_SCLK_INV;
480 snd_soc_write(codec, SGTL5000_CHIP_I2S_CTRL, i2sctl);
485 /* set codec sysclk */
486 static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
487 int clk_id, unsigned int freq, int dir)
489 struct snd_soc_codec *codec = codec_dai->codec;
490 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
493 case SGTL5000_SYSCLK:
494 sgtl5000->sysclk = freq;
504 * set clock according to i2s frame clock,
505 * sgtl5000 provide 2 clock sources.
506 * 1. sys_mclk. sample freq can only configure to
507 * 1/256, 1/384, 1/512 of sys_mclk.
508 * 2. pll. can derive any audio clocks.
510 * clock setting rules:
511 * 1. in slave mode, only sys_mclk can use.
512 * 2. as constraint by sys_mclk, sample freq should
513 * set to 32k, 44.1k and above.
514 * 3. using sys_mclk prefer to pll to save power.
516 static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
518 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
520 int sys_fs; /* sample freq */
523 * sample freq should be divided by frame clock,
524 * if frame clock lower than 44.1khz, sample feq should set to
527 switch (frame_rate) {
541 /* set divided factor of frame clock */
542 switch (sys_fs / frame_rate) {
544 clk_ctl |= SGTL5000_RATE_MODE_DIV_4 << SGTL5000_RATE_MODE_SHIFT;
547 clk_ctl |= SGTL5000_RATE_MODE_DIV_2 << SGTL5000_RATE_MODE_SHIFT;
550 clk_ctl |= SGTL5000_RATE_MODE_DIV_1 << SGTL5000_RATE_MODE_SHIFT;
556 /* set the sys_fs according to frame rate */
559 clk_ctl |= SGTL5000_SYS_FS_32k << SGTL5000_SYS_FS_SHIFT;
562 clk_ctl |= SGTL5000_SYS_FS_44_1k << SGTL5000_SYS_FS_SHIFT;
565 clk_ctl |= SGTL5000_SYS_FS_48k << SGTL5000_SYS_FS_SHIFT;
568 clk_ctl |= SGTL5000_SYS_FS_96k << SGTL5000_SYS_FS_SHIFT;
571 dev_err(codec->dev, "frame rate %d not supported\n",
577 * calculate the divider of mclk/sample_freq,
578 * factor of freq =96k can only be 256, since mclk in range (12m,27m)
580 switch (sgtl5000->sysclk / sys_fs) {
582 clk_ctl |= SGTL5000_MCLK_FREQ_256FS <<
583 SGTL5000_MCLK_FREQ_SHIFT;
586 clk_ctl |= SGTL5000_MCLK_FREQ_384FS <<
587 SGTL5000_MCLK_FREQ_SHIFT;
590 clk_ctl |= SGTL5000_MCLK_FREQ_512FS <<
591 SGTL5000_MCLK_FREQ_SHIFT;
594 /* if mclk not satisify the divider, use pll */
595 if (sgtl5000->master) {
596 clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
597 SGTL5000_MCLK_FREQ_SHIFT;
600 "PLL not supported in slave mode\n");
605 /* if using pll, please check manual 6.4.2 for detail */
606 if ((clk_ctl & SGTL5000_MCLK_FREQ_MASK) == SGTL5000_MCLK_FREQ_PLL) {
610 unsigned int in, int_div, frac_div;
612 if (sgtl5000->sysclk > 17000000) {
614 in = sgtl5000->sysclk / 2;
617 in = sgtl5000->sysclk;
628 pll_ctl = int_div << SGTL5000_PLL_INT_DIV_SHIFT |
629 frac_div << SGTL5000_PLL_FRAC_DIV_SHIFT;
631 snd_soc_write(codec, SGTL5000_CHIP_PLL_CTRL, pll_ctl);
633 snd_soc_update_bits(codec,
634 SGTL5000_CHIP_CLK_TOP_CTRL,
635 SGTL5000_INPUT_FREQ_DIV2,
636 SGTL5000_INPUT_FREQ_DIV2);
638 snd_soc_update_bits(codec,
639 SGTL5000_CHIP_CLK_TOP_CTRL,
640 SGTL5000_INPUT_FREQ_DIV2,
644 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
645 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
646 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP);
649 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
650 SGTL5000_PLL_POWERUP | SGTL5000_VCOAMP_POWERUP,
654 /* if using pll, clk_ctrl must be set after pll power up */
655 snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL, clk_ctl);
661 * Set PCM DAI bit size and sample rate.
662 * input: params_rate, params_fmt
664 static int sgtl5000_pcm_hw_params(struct snd_pcm_substream *substream,
665 struct snd_pcm_hw_params *params,
666 struct snd_soc_dai *dai)
668 struct snd_soc_codec *codec = dai->codec;
669 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
670 int channels = params_channels(params);
675 /* sysclk should already set */
676 if (!sgtl5000->sysclk) {
677 dev_err(codec->dev, "%s: set sysclk first!\n", __func__);
681 if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
682 stereo = SGTL5000_DAC_STEREO;
684 stereo = SGTL5000_ADC_STEREO;
686 /* set mono to save power */
687 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER, stereo,
688 channels == 1 ? 0 : stereo);
690 /* set codec clock base on lrclk */
691 ret = sgtl5000_set_clock(codec, params_rate(params));
695 /* set i2s data format */
696 switch (params_format(params)) {
697 case SNDRV_PCM_FORMAT_S16_LE:
698 if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
700 i2s_ctl |= SGTL5000_I2S_DLEN_16 << SGTL5000_I2S_DLEN_SHIFT;
701 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_32FS <<
702 SGTL5000_I2S_SCLKFREQ_SHIFT;
704 case SNDRV_PCM_FORMAT_S20_3LE:
705 i2s_ctl |= SGTL5000_I2S_DLEN_20 << SGTL5000_I2S_DLEN_SHIFT;
706 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
707 SGTL5000_I2S_SCLKFREQ_SHIFT;
709 case SNDRV_PCM_FORMAT_S24_LE:
710 i2s_ctl |= SGTL5000_I2S_DLEN_24 << SGTL5000_I2S_DLEN_SHIFT;
711 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
712 SGTL5000_I2S_SCLKFREQ_SHIFT;
714 case SNDRV_PCM_FORMAT_S32_LE:
715 if (sgtl5000->fmt == SND_SOC_DAIFMT_RIGHT_J)
717 i2s_ctl |= SGTL5000_I2S_DLEN_32 << SGTL5000_I2S_DLEN_SHIFT;
718 i2s_ctl |= SGTL5000_I2S_SCLKFREQ_64FS <<
719 SGTL5000_I2S_SCLKFREQ_SHIFT;
725 snd_soc_update_bits(codec, SGTL5000_CHIP_I2S_CTRL,
726 SGTL5000_I2S_DLEN_MASK | SGTL5000_I2S_SCLKFREQ_MASK,
732 #ifdef CONFIG_REGULATOR
733 static int ldo_regulator_is_enabled(struct regulator_dev *dev)
735 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
740 static int ldo_regulator_enable(struct regulator_dev *dev)
742 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
743 struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
746 if (ldo_regulator_is_enabled(dev))
749 /* set regulator value firstly */
750 reg = (1600 - ldo->voltage / 1000) / 50;
751 reg = clamp(reg, 0x0, 0xf);
753 /* amend the voltage value, unit: uV */
754 ldo->voltage = (1600 - reg * 50) * 1000;
756 /* set voltage to register */
757 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
758 SGTL5000_LINREG_VDDD_MASK, reg);
760 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
761 SGTL5000_LINEREG_D_POWERUP,
762 SGTL5000_LINEREG_D_POWERUP);
764 /* when internal ldo enabled, simple digital power can be disabled */
765 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
766 SGTL5000_LINREG_SIMPLE_POWERUP,
773 static int ldo_regulator_disable(struct regulator_dev *dev)
775 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
776 struct snd_soc_codec *codec = (struct snd_soc_codec *)ldo->codec_data;
778 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
779 SGTL5000_LINEREG_D_POWERUP,
782 /* clear voltage info */
783 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
784 SGTL5000_LINREG_VDDD_MASK, 0);
791 static int ldo_regulator_get_voltage(struct regulator_dev *dev)
793 struct ldo_regulator *ldo = rdev_get_drvdata(dev);
798 static struct regulator_ops ldo_regulator_ops = {
799 .is_enabled = ldo_regulator_is_enabled,
800 .enable = ldo_regulator_enable,
801 .disable = ldo_regulator_disable,
802 .get_voltage = ldo_regulator_get_voltage,
805 static int ldo_regulator_register(struct snd_soc_codec *codec,
806 struct regulator_init_data *init_data,
809 struct ldo_regulator *ldo;
810 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
811 struct regulator_config config = { };
813 ldo = kzalloc(sizeof(struct ldo_regulator), GFP_KERNEL);
816 dev_err(codec->dev, "failed to allocate ldo_regulator\n");
820 ldo->desc.name = kstrdup(dev_name(codec->dev), GFP_KERNEL);
821 if (!ldo->desc.name) {
823 dev_err(codec->dev, "failed to allocate decs name memory\n");
827 ldo->desc.type = REGULATOR_VOLTAGE;
828 ldo->desc.owner = THIS_MODULE;
829 ldo->desc.ops = &ldo_regulator_ops;
830 ldo->desc.n_voltages = 1;
832 ldo->codec_data = codec;
833 ldo->voltage = voltage;
835 config.dev = codec->dev;
836 config.driver_data = ldo;
837 config.init_data = init_data;
839 ldo->dev = regulator_register(&ldo->desc, &config);
840 if (IS_ERR(ldo->dev)) {
841 int ret = PTR_ERR(ldo->dev);
843 dev_err(codec->dev, "failed to register regulator\n");
844 kfree(ldo->desc.name);
854 static int ldo_regulator_remove(struct snd_soc_codec *codec)
856 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
857 struct ldo_regulator *ldo = sgtl5000->ldo;
862 regulator_unregister(ldo->dev);
863 kfree(ldo->desc.name);
869 static int ldo_regulator_register(struct snd_soc_codec *codec,
870 struct regulator_init_data *init_data,
873 dev_err(codec->dev, "this setup needs regulator support in the kernel\n");
877 static int ldo_regulator_remove(struct snd_soc_codec *codec)
885 * common state changes:
887 * off --> standby --> prepare --> on
888 * standby --> prepare --> on
891 * on --> prepare --> standby
893 static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
894 enum snd_soc_bias_level level)
897 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
900 case SND_SOC_BIAS_ON:
901 case SND_SOC_BIAS_PREPARE:
903 case SND_SOC_BIAS_STANDBY:
904 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
905 ret = regulator_bulk_enable(
906 ARRAY_SIZE(sgtl5000->supplies),
912 regcache_cache_only(sgtl5000->regmap, false);
914 ret = regcache_sync(sgtl5000->regmap);
917 "Failed to restore cache: %d\n", ret);
919 regcache_cache_only(sgtl5000->regmap, true);
920 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
928 case SND_SOC_BIAS_OFF:
929 regcache_cache_only(sgtl5000->regmap, true);
930 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
935 codec->dapm.bias_level = level;
939 #define SGTL5000_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
940 SNDRV_PCM_FMTBIT_S20_3LE |\
941 SNDRV_PCM_FMTBIT_S24_LE |\
942 SNDRV_PCM_FMTBIT_S32_LE)
944 static const struct snd_soc_dai_ops sgtl5000_ops = {
945 .hw_params = sgtl5000_pcm_hw_params,
946 .digital_mute = sgtl5000_digital_mute,
947 .set_fmt = sgtl5000_set_dai_fmt,
948 .set_sysclk = sgtl5000_set_dai_sysclk,
951 static struct snd_soc_dai_driver sgtl5000_dai = {
954 .stream_name = "Playback",
958 * only support 8~48K + 96K,
959 * TODO modify hw_param to support more
961 .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
962 .formats = SGTL5000_FORMATS,
965 .stream_name = "Capture",
968 .rates = SNDRV_PCM_RATE_8000_48000 | SNDRV_PCM_RATE_96000,
969 .formats = SGTL5000_FORMATS,
971 .ops = &sgtl5000_ops,
972 .symmetric_rates = 1,
975 static bool sgtl5000_volatile(struct device *dev, unsigned int reg)
978 case SGTL5000_CHIP_ID:
979 case SGTL5000_CHIP_ADCDAC_CTRL:
980 case SGTL5000_CHIP_ANA_STATUS:
987 static bool sgtl5000_readable(struct device *dev, unsigned int reg)
990 case SGTL5000_CHIP_ID:
991 case SGTL5000_CHIP_DIG_POWER:
992 case SGTL5000_CHIP_CLK_CTRL:
993 case SGTL5000_CHIP_I2S_CTRL:
994 case SGTL5000_CHIP_SSS_CTRL:
995 case SGTL5000_CHIP_ADCDAC_CTRL:
996 case SGTL5000_CHIP_DAC_VOL:
997 case SGTL5000_CHIP_PAD_STRENGTH:
998 case SGTL5000_CHIP_ANA_ADC_CTRL:
999 case SGTL5000_CHIP_ANA_HP_CTRL:
1000 case SGTL5000_CHIP_ANA_CTRL:
1001 case SGTL5000_CHIP_LINREG_CTRL:
1002 case SGTL5000_CHIP_REF_CTRL:
1003 case SGTL5000_CHIP_MIC_CTRL:
1004 case SGTL5000_CHIP_LINE_OUT_CTRL:
1005 case SGTL5000_CHIP_LINE_OUT_VOL:
1006 case SGTL5000_CHIP_ANA_POWER:
1007 case SGTL5000_CHIP_PLL_CTRL:
1008 case SGTL5000_CHIP_CLK_TOP_CTRL:
1009 case SGTL5000_CHIP_ANA_STATUS:
1010 case SGTL5000_CHIP_SHORT_CTRL:
1011 case SGTL5000_CHIP_ANA_TEST2:
1012 case SGTL5000_DAP_CTRL:
1013 case SGTL5000_DAP_PEQ:
1014 case SGTL5000_DAP_BASS_ENHANCE:
1015 case SGTL5000_DAP_BASS_ENHANCE_CTRL:
1016 case SGTL5000_DAP_AUDIO_EQ:
1017 case SGTL5000_DAP_SURROUND:
1018 case SGTL5000_DAP_FLT_COEF_ACCESS:
1019 case SGTL5000_DAP_COEF_WR_B0_MSB:
1020 case SGTL5000_DAP_COEF_WR_B0_LSB:
1021 case SGTL5000_DAP_EQ_BASS_BAND0:
1022 case SGTL5000_DAP_EQ_BASS_BAND1:
1023 case SGTL5000_DAP_EQ_BASS_BAND2:
1024 case SGTL5000_DAP_EQ_BASS_BAND3:
1025 case SGTL5000_DAP_EQ_BASS_BAND4:
1026 case SGTL5000_DAP_MAIN_CHAN:
1027 case SGTL5000_DAP_MIX_CHAN:
1028 case SGTL5000_DAP_AVC_CTRL:
1029 case SGTL5000_DAP_AVC_THRESHOLD:
1030 case SGTL5000_DAP_AVC_ATTACK:
1031 case SGTL5000_DAP_AVC_DECAY:
1032 case SGTL5000_DAP_COEF_WR_B1_MSB:
1033 case SGTL5000_DAP_COEF_WR_B1_LSB:
1034 case SGTL5000_DAP_COEF_WR_B2_MSB:
1035 case SGTL5000_DAP_COEF_WR_B2_LSB:
1036 case SGTL5000_DAP_COEF_WR_A1_MSB:
1037 case SGTL5000_DAP_COEF_WR_A1_LSB:
1038 case SGTL5000_DAP_COEF_WR_A2_MSB:
1039 case SGTL5000_DAP_COEF_WR_A2_LSB:
1047 #ifdef CONFIG_SUSPEND
1048 static int sgtl5000_suspend(struct snd_soc_codec *codec)
1050 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
1056 * restore all sgtl5000 registers,
1057 * since a big hole between dap and regular registers,
1058 * we will restore them respectively.
1060 static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
1062 u16 *cache = codec->reg_cache;
1065 /* restore regular registers */
1066 for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
1068 /* These regs should restore in particular order */
1069 if (reg == SGTL5000_CHIP_ANA_POWER ||
1070 reg == SGTL5000_CHIP_CLK_CTRL ||
1071 reg == SGTL5000_CHIP_LINREG_CTRL ||
1072 reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
1073 reg == SGTL5000_CHIP_REF_CTRL)
1076 snd_soc_write(codec, reg, cache[reg]);
1079 /* restore dap registers */
1080 for (reg = SGTL5000_DAP_REG_OFFSET; reg < SGTL5000_MAX_REG_OFFSET; reg += 2)
1081 snd_soc_write(codec, reg, cache[reg]);
1084 * restore these regs according to the power setting sequence in
1085 * sgtl5000_set_power_regs() and clock setting sequence in
1086 * sgtl5000_set_clock().
1088 * The order of restore is:
1089 * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
1090 * SGTL5000_CHIP_ANA_POWER PLL bits set
1091 * 2. SGTL5000_CHIP_LINREG_CTRL should be set before
1092 * SGTL5000_CHIP_ANA_POWER LINREG_D restored
1093 * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
1094 * prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
1096 snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
1097 cache[SGTL5000_CHIP_LINREG_CTRL]);
1099 snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER,
1100 cache[SGTL5000_CHIP_ANA_POWER]);
1102 snd_soc_write(codec, SGTL5000_CHIP_CLK_CTRL,
1103 cache[SGTL5000_CHIP_CLK_CTRL]);
1105 snd_soc_write(codec, SGTL5000_CHIP_REF_CTRL,
1106 cache[SGTL5000_CHIP_REF_CTRL]);
1108 snd_soc_write(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
1109 cache[SGTL5000_CHIP_LINE_OUT_CTRL]);
1113 static int sgtl5000_resume(struct snd_soc_codec *codec)
1115 /* Bring the codec back up to standby to enable regulators */
1116 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1118 /* Restore registers by cached in memory */
1119 sgtl5000_restore_regs(codec);
1123 #define sgtl5000_suspend NULL
1124 #define sgtl5000_resume NULL
1125 #endif /* CONFIG_SUSPEND */
1128 * sgtl5000 has 3 internal power supplies:
1129 * 1. VAG, normally set to vdda/2
1130 * 2. chargepump, set to different value
1131 * according to voltage of vdda and vddio
1132 * 3. line out VAG, normally set to vddio/2
1134 * and should be set according to:
1135 * 1. vddd provided by external or not
1136 * 2. vdda and vddio voltage value. > 3.1v or not
1137 * 3. chip revision >=0x11 or not. If >=0x11, not use external vddd.
1139 static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
1147 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1149 vdda = regulator_get_voltage(sgtl5000->supplies[VDDA].consumer);
1150 vddio = regulator_get_voltage(sgtl5000->supplies[VDDIO].consumer);
1151 vddd = regulator_get_voltage(sgtl5000->supplies[VDDD].consumer);
1154 vddio = vddio / 1000;
1157 if (vdda <= 0 || vddio <= 0 || vddd < 0) {
1158 dev_err(codec->dev, "regulator voltage not set correctly\n");
1163 /* according to datasheet, maximum voltage of supplies */
1164 if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
1166 "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
1173 ana_pwr = snd_soc_read(codec, SGTL5000_CHIP_ANA_POWER);
1174 ana_pwr |= SGTL5000_DAC_STEREO |
1175 SGTL5000_ADC_STEREO |
1176 SGTL5000_REFTOP_POWERUP;
1177 lreg_ctrl = snd_soc_read(codec, SGTL5000_CHIP_LINREG_CTRL);
1179 if (vddio < 3100 && vdda < 3100) {
1180 /* enable internal oscillator used for charge pump */
1181 snd_soc_update_bits(codec, SGTL5000_CHIP_CLK_TOP_CTRL,
1182 SGTL5000_INT_OSC_EN,
1183 SGTL5000_INT_OSC_EN);
1184 /* Enable VDDC charge pump */
1185 ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
1186 } else if (vddio >= 3100 && vdda >= 3100) {
1188 * if vddio and vddd > 3.1v,
1189 * charge pump should be clean before set ana_pwr
1191 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1192 SGTL5000_VDDC_CHRGPMP_POWERUP, 0);
1194 /* VDDC use VDDIO rail */
1195 lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
1196 lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
1197 SGTL5000_VDDC_MAN_ASSN_SHIFT;
1200 snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
1202 snd_soc_write(codec, SGTL5000_CHIP_ANA_POWER, ana_pwr);
1204 /* set voltage to register */
1205 snd_soc_update_bits(codec, SGTL5000_CHIP_LINREG_CTRL,
1206 SGTL5000_LINREG_VDDD_MASK, 0x8);
1209 * if vddd linear reg has been enabled,
1210 * simple digital supply should be clear to get
1211 * proper VDDD voltage.
1213 if (ana_pwr & SGTL5000_LINEREG_D_POWERUP)
1214 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1215 SGTL5000_LINREG_SIMPLE_POWERUP,
1218 snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
1219 SGTL5000_LINREG_SIMPLE_POWERUP |
1220 SGTL5000_STARTUP_POWERUP,
1224 * set ADC/DAC VAG to vdda / 2,
1225 * should stay in range (0.8v, 1.575v)
1228 if (vag <= SGTL5000_ANA_GND_BASE)
1230 else if (vag >= SGTL5000_ANA_GND_BASE + SGTL5000_ANA_GND_STP *
1231 (SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT))
1232 vag = SGTL5000_ANA_GND_MASK >> SGTL5000_ANA_GND_SHIFT;
1234 vag = (vag - SGTL5000_ANA_GND_BASE) / SGTL5000_ANA_GND_STP;
1236 snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
1237 SGTL5000_ANA_GND_MASK, vag << SGTL5000_ANA_GND_SHIFT);
1239 /* set line out VAG to vddio / 2, in range (0.8v, 1.675v) */
1241 if (vag <= SGTL5000_LINE_OUT_GND_BASE)
1243 else if (vag >= SGTL5000_LINE_OUT_GND_BASE +
1244 SGTL5000_LINE_OUT_GND_STP * SGTL5000_LINE_OUT_GND_MAX)
1245 vag = SGTL5000_LINE_OUT_GND_MAX;
1247 vag = (vag - SGTL5000_LINE_OUT_GND_BASE) /
1248 SGTL5000_LINE_OUT_GND_STP;
1250 snd_soc_update_bits(codec, SGTL5000_CHIP_LINE_OUT_CTRL,
1251 SGTL5000_LINE_OUT_CURRENT_MASK |
1252 SGTL5000_LINE_OUT_GND_MASK,
1253 vag << SGTL5000_LINE_OUT_GND_SHIFT |
1254 SGTL5000_LINE_OUT_CURRENT_360u <<
1255 SGTL5000_LINE_OUT_CURRENT_SHIFT);
1260 static int sgtl5000_replace_vddd_with_ldo(struct snd_soc_codec *codec)
1262 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1265 /* set internal ldo to 1.2v */
1266 ret = ldo_regulator_register(codec, &ldo_init_data, LDO_VOLTAGE);
1269 "Failed to register vddd internal supplies: %d\n", ret);
1273 sgtl5000->supplies[VDDD].supply = LDO_CONSUMER_NAME;
1275 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
1276 sgtl5000->supplies);
1279 ldo_regulator_remove(codec);
1280 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
1284 dev_info(codec->dev, "Using internal LDO instead of VDDD\n");
1288 static int sgtl5000_enable_regulators(struct snd_soc_codec *codec)
1294 int external_vddd = 0;
1295 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1297 for (i = 0; i < ARRAY_SIZE(sgtl5000->supplies); i++)
1298 sgtl5000->supplies[i].supply = supply_names[i];
1300 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(sgtl5000->supplies),
1301 sgtl5000->supplies);
1305 ret = sgtl5000_replace_vddd_with_ldo(codec);
1310 ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
1311 sgtl5000->supplies);
1313 goto err_regulator_free;
1315 /* wait for all power rails bring up */
1319 * workaround for revision 0x11 and later,
1320 * roll back to use internal LDO
1323 ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®);
1325 goto err_regulator_disable;
1327 rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
1329 if (external_vddd && rev >= 0x11) {
1330 /* disable all regulator first */
1331 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1332 sgtl5000->supplies);
1333 /* free VDDD regulator */
1334 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1335 sgtl5000->supplies);
1337 ret = sgtl5000_replace_vddd_with_ldo(codec);
1341 ret = regulator_bulk_enable(ARRAY_SIZE(sgtl5000->supplies),
1342 sgtl5000->supplies);
1344 goto err_regulator_free;
1346 /* wait for all power rails bring up */
1352 err_regulator_disable:
1353 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1354 sgtl5000->supplies);
1356 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1357 sgtl5000->supplies);
1359 ldo_regulator_remove(codec);
1364 static int sgtl5000_probe(struct snd_soc_codec *codec)
1367 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1369 /* setup i2c data ops */
1370 codec->control_data = sgtl5000->regmap;
1371 ret = snd_soc_codec_set_cache_io(codec, 16, 16, SND_SOC_REGMAP);
1373 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
1377 ret = sgtl5000_enable_regulators(codec);
1381 /* power up sgtl5000 */
1382 ret = sgtl5000_set_power_regs(codec);
1386 /* enable small pop, introduce 400ms delay in turning off */
1387 snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
1389 SGTL5000_SMALL_POP);
1391 /* disable short cut detector */
1392 snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
1395 * set i2s as default input of sound switch
1396 * TODO: add sound switch to control and dapm widge.
1398 snd_soc_write(codec, SGTL5000_CHIP_SSS_CTRL,
1399 SGTL5000_DAC_SEL_I2S_IN << SGTL5000_DAC_SEL_SHIFT);
1400 snd_soc_write(codec, SGTL5000_CHIP_DIG_POWER,
1401 SGTL5000_ADC_EN | SGTL5000_DAC_EN);
1403 /* enable dac volume ramp by default */
1404 snd_soc_write(codec, SGTL5000_CHIP_ADCDAC_CTRL,
1405 SGTL5000_DAC_VOL_RAMP_EN |
1406 SGTL5000_DAC_MUTE_RIGHT |
1407 SGTL5000_DAC_MUTE_LEFT);
1409 snd_soc_write(codec, SGTL5000_CHIP_PAD_STRENGTH, 0x015f);
1411 snd_soc_write(codec, SGTL5000_CHIP_ANA_CTRL,
1412 SGTL5000_HP_ZCD_EN |
1413 SGTL5000_ADC_ZCD_EN);
1415 snd_soc_write(codec, SGTL5000_CHIP_MIC_CTRL, 2);
1420 * Enable DAP in kcontrol and dapm.
1422 snd_soc_write(codec, SGTL5000_DAP_CTRL, 0);
1424 /* leading to standby state */
1425 ret = sgtl5000_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
1432 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1433 sgtl5000->supplies);
1434 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1435 sgtl5000->supplies);
1436 ldo_regulator_remove(codec);
1441 static int sgtl5000_remove(struct snd_soc_codec *codec)
1443 struct sgtl5000_priv *sgtl5000 = snd_soc_codec_get_drvdata(codec);
1445 sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
1447 regulator_bulk_disable(ARRAY_SIZE(sgtl5000->supplies),
1448 sgtl5000->supplies);
1449 regulator_bulk_free(ARRAY_SIZE(sgtl5000->supplies),
1450 sgtl5000->supplies);
1451 ldo_regulator_remove(codec);
1456 static struct snd_soc_codec_driver sgtl5000_driver = {
1457 .probe = sgtl5000_probe,
1458 .remove = sgtl5000_remove,
1459 .suspend = sgtl5000_suspend,
1460 .resume = sgtl5000_resume,
1461 .set_bias_level = sgtl5000_set_bias_level,
1462 .controls = sgtl5000_snd_controls,
1463 .num_controls = ARRAY_SIZE(sgtl5000_snd_controls),
1464 .dapm_widgets = sgtl5000_dapm_widgets,
1465 .num_dapm_widgets = ARRAY_SIZE(sgtl5000_dapm_widgets),
1466 .dapm_routes = sgtl5000_dapm_routes,
1467 .num_dapm_routes = ARRAY_SIZE(sgtl5000_dapm_routes),
1470 static const struct regmap_config sgtl5000_regmap = {
1474 .max_register = SGTL5000_MAX_REG_OFFSET,
1475 .volatile_reg = sgtl5000_volatile,
1476 .readable_reg = sgtl5000_readable,
1478 .cache_type = REGCACHE_RBTREE,
1479 .reg_defaults = sgtl5000_reg_defaults,
1480 .num_reg_defaults = ARRAY_SIZE(sgtl5000_reg_defaults),
1484 * Write all the default values from sgtl5000_reg_defaults[] array into the
1485 * sgtl5000 registers, to make sure we always start with the sane registers
1486 * values as stated in the datasheet.
1488 * Since sgtl5000 does not have a reset line, nor a reset command in software,
1489 * we follow this approach to guarantee we always start from the default values
1490 * and avoid problems like, not being able to probe after an audio playback
1491 * followed by a system reset or a 'reboot' command in Linux
1493 static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000)
1495 int i, ret, val, index;
1497 for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) {
1498 val = sgtl5000_reg_defaults[i].def;
1499 index = sgtl5000_reg_defaults[i].reg;
1500 ret = regmap_write(sgtl5000->regmap, index, val);
1508 static int sgtl5000_i2c_probe(struct i2c_client *client,
1509 const struct i2c_device_id *id)
1511 struct sgtl5000_priv *sgtl5000;
1514 sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
1519 sgtl5000->regmap = devm_regmap_init_i2c(client, &sgtl5000_regmap);
1520 if (IS_ERR(sgtl5000->regmap)) {
1521 ret = PTR_ERR(sgtl5000->regmap);
1522 dev_err(&client->dev, "Failed to allocate regmap: %d\n", ret);
1526 sgtl5000->mclk = devm_clk_get(&client->dev, NULL);
1527 if (IS_ERR(sgtl5000->mclk)) {
1528 ret = PTR_ERR(sgtl5000->mclk);
1529 dev_err(&client->dev, "Failed to get mclock: %d\n", ret);
1530 /* Defer the probe to see if the clk will be provided later */
1532 return -EPROBE_DEFER;
1536 ret = clk_prepare_enable(sgtl5000->mclk);
1540 /* read chip information */
1541 ret = regmap_read(sgtl5000->regmap, SGTL5000_CHIP_ID, ®);
1545 if (((reg & SGTL5000_PARTID_MASK) >> SGTL5000_PARTID_SHIFT) !=
1546 SGTL5000_PARTID_PART_ID) {
1547 dev_err(&client->dev,
1548 "Device with ID register %x is not a sgtl5000\n", reg);
1553 rev = (reg & SGTL5000_REVID_MASK) >> SGTL5000_REVID_SHIFT;
1554 dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev);
1556 i2c_set_clientdata(client, sgtl5000);
1558 /* Ensure sgtl5000 will start with sane register values */
1559 ret = sgtl5000_fill_defaults(sgtl5000);
1563 ret = snd_soc_register_codec(&client->dev,
1564 &sgtl5000_driver, &sgtl5000_dai, 1);
1571 clk_disable_unprepare(sgtl5000->mclk);
1575 static int sgtl5000_i2c_remove(struct i2c_client *client)
1577 struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
1579 snd_soc_unregister_codec(&client->dev);
1580 clk_disable_unprepare(sgtl5000->mclk);
1584 static const struct i2c_device_id sgtl5000_id[] = {
1589 MODULE_DEVICE_TABLE(i2c, sgtl5000_id);
1591 static const struct of_device_id sgtl5000_dt_ids[] = {
1592 { .compatible = "fsl,sgtl5000", },
1595 MODULE_DEVICE_TABLE(of, sgtl5000_dt_ids);
1597 static struct i2c_driver sgtl5000_i2c_driver = {
1600 .owner = THIS_MODULE,
1601 .of_match_table = sgtl5000_dt_ids,
1603 .probe = sgtl5000_i2c_probe,
1604 .remove = sgtl5000_i2c_remove,
1605 .id_table = sgtl5000_id,
1608 module_i2c_driver(sgtl5000_i2c_driver);
1610 MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
1611 MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>");
1612 MODULE_LICENSE("GPL");