sound/oss/sb_common.c

   1 /*
   2  * sound/oss/sb_common.c
   3  *
   4  * Common routines for Sound Blaster compatible cards.
   5  *
   6  *
   7  * Copyright (C) by Hannu Savolainen 1993-1997
   8  *
   9  * OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
  10  * Version 2 (June 1991). See the "COPYING" file distributed with this software
  11  * for more info.
  12  *
  13  *
  14  * Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts
  15  *                       for full duplex support ( only sb16 by now )
  16  * Rolf Fokkens:         Added (BETA?) support for ES1887 chips.
  17  * (fokkensr@vertis.nl)  Which means: You can adjust the recording levels.
  18  *
  19  * 2000/01/18 - separated sb_card and sb_common -
  20  * Jeff Garzik <jgarzik@pobox.com>
  21  *
  22  * 2000/09/18 - got rid of attach_uart401
  23  * Arnaldo Carvalho de Melo <acme@conectiva.com.br>
  24  *
  25  * 2001/01/26 - replaced CLI/STI with spinlocks
  26  * Chris Rankin <rankinc@zipworld.com.au>
  27  */
  28
  29 #include <linux/init.h>
  30 #include <linux/interrupt.h>
  31 #include <linux/module.h>
  32 #include <linux/delay.h>
  33 #include <linux/spinlock.h>
  34 #include <linux/slab.h>
  35
  36 #include "sound_config.h"
  37 #include "sound_firmware.h"
  38
  39 #include "mpu401.h"
  40
  41 #include "sb_mixer.h"
  42 #include "sb.h"
  43 #include "sb_ess.h"
  44
  45 /*
  46  * global module flag
  47  */
  48
  49 int sb_be_quiet;
  50
  51 static sb_devc *detected_devc;  /* For communication from probe to init */
  52 static sb_devc *last_devc;      /* For MPU401 initialization */
  53
  54 static unsigned char jazz_irq_bits[] = {
  55         0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6
  56 };
  57
  58 static unsigned char jazz_dma_bits[] = {
  59         0, 1, 0, 2, 0, 3, 0, 4
  60 };
  61
  62 void *smw_free;
  63
  64 /*
  65  * Jazz16 chipset specific control variables
  66  */
  67
  68 static int jazz16_base;                 /* Not detected */
  69 static unsigned char jazz16_bits;       /* I/O relocation bits */
  70 static DEFINE_SPINLOCK(jazz16_lock);
  71
  72 /*
  73  * Logitech Soundman Wave specific initialization code
  74  */
  75
  76 #ifdef SMW_MIDI0001_INCLUDED
  77 #include "smw-midi0001.h"
  78 #else
  79 static unsigned char *smw_ucode;
  80 static int      smw_ucodeLen;
  81
  82 #endif
  83
  84 static sb_devc *last_sb;                /* Last sb loaded */
  85
  86 int sb_dsp_command(sb_devc * devc, unsigned char val)
  87 {
  88         int i;
  89         unsigned long limit;
  90
  91         limit = jiffies + HZ / 10;      /* Timeout */
  92
  93         /*
  94          * Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes
  95          * called while interrupts are disabled. This means that the timer is
  96          * disabled also. However the timeout situation is a abnormal condition.
  97          * Normally the DSP should be ready to accept commands after just couple of
  98          * loops.
  99          */
 100
 101         for (i = 0; i < 500000 && (limit-jiffies)>0; i++)
 102         {
 103                 if ((inb(DSP_STATUS) & 0x80) == 0)
 104                 {
 105                         outb((val), DSP_COMMAND);
 106                         return 1;
 107                 }
 108         }
 109         printk(KERN_WARNING "Sound Blaster:  DSP command(%x) timeout.\n", val);
 110         return 0;
 111 }
 112
 113 int sb_dsp_get_byte(sb_devc * devc)
 114 {
 115         int i;
 116
 117         for (i = 1000; i; i--)
 118         {
 119                 if (inb(DSP_DATA_AVAIL) & 0x80)
 120                         return inb(DSP_READ);
 121         }
 122         return 0xffff;
 123 }
 124
 125 static void sb_intr (sb_devc *devc)
 126 {
 127         int status;
 128         unsigned char   src = 0xff;
 129
 130         if (devc->model == MDL_SB16)
 131         {
 132                 src = sb_getmixer(devc, IRQ_STAT);      /* Interrupt source register */
 133
 134                 if (src & 4)                                            /* MPU401 interrupt */
 135                         if(devc->midi_irq_cookie)
 136                                 uart401intr(devc->irq, devc->midi_irq_cookie);
 137
 138                 if (!(src & 3))
 139                         return; /* Not a DSP interrupt */
 140         }
 141         if (devc->intr_active && (!devc->fullduplex || (src & 0x01)))
 142         {
 143                 switch (devc->irq_mode)
 144                 {
 145                         case IMODE_OUTPUT:
 146                                 DMAbuf_outputintr(devc->dev, 1);
 147                                 break;
 148
 149                         case IMODE_INPUT:
 150                                 DMAbuf_inputintr(devc->dev);
 151                                 break;
 152
 153                         case IMODE_INIT:
 154                                 break;
 155
 156                         case IMODE_MIDI:
 157                                 sb_midi_interrupt(devc);
 158                                 break;
 159
 160                         default:
 161                                 /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
 162                                 ;
 163                 }
 164         }
 165         else if (devc->intr_active_16 && (src & 0x02))
 166         {
 167                 switch (devc->irq_mode_16)
 168                 {
 169                         case IMODE_OUTPUT:
 170                                 DMAbuf_outputintr(devc->dev, 1);
 171                                 break;
 172
 173                         case IMODE_INPUT:
 174                                 DMAbuf_inputintr(devc->dev);
 175                                 break;
 176
 177                         case IMODE_INIT:
 178                                 break;
 179
 180                         default:
 181                                 /* printk(KERN_WARNING "Sound Blaster: Unexpected interrupt\n"); */
 182                                 ;
 183                 }
 184         }
 185         /*
 186          * Acknowledge interrupts
 187          */
 188
 189         if (src & 0x01)
 190                 status = inb(DSP_DATA_AVAIL);
 191
 192         if (devc->model == MDL_SB16 && src & 0x02)
 193                 status = inb(DSP_DATA_AVL16);
 194 }
 195
 196 static void pci_intr(sb_devc *devc)
 197 {
 198         int src = inb(devc->pcibase+0x1A);
 199         src&=3;
 200         if(src)
 201                 sb_intr(devc);
 202 }
 203
 204 static irqreturn_t sbintr(int irq, void *dev_id)
 205 {
 206         sb_devc *devc = dev_id;
 207
 208         devc->irq_ok = 1;
 209
 210         switch (devc->model) {
 211         case MDL_ESSPCI:
 212                 pci_intr (devc);
 213                 break;
 214
 215         case MDL_ESS:
 216                 ess_intr (devc);
 217                 break;
 218         default:
 219                 sb_intr (devc);
 220                 break;
 221         }
 222         return IRQ_HANDLED;
 223 }
 224
 225 int sb_dsp_reset(sb_devc * devc)
 226 {
 227         int loopc;
 228
 229         DEB(printk("Entered sb_dsp_reset()\n"));
 230
 231         if (devc->model == MDL_ESS) return ess_dsp_reset (devc);
 232
 233         /* This is only for non-ESS chips */
 234
 235         outb(1, DSP_RESET);
 236
 237         udelay(10);
 238         outb(0, DSP_RESET);
 239         udelay(30);
 240
 241         for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
 242
 243         if (inb(DSP_READ) != 0xAA)
 244         {
 245                 DDB(printk("sb: No response to RESET\n"));
 246                 return 0;       /* Sorry */
 247         }
 248
 249         DEB(printk("sb_dsp_reset() OK\n"));
 250
 251         return 1;
 252 }
 253
 254 static void dsp_get_vers(sb_devc * devc)
 255 {
 256         int i;
 257
 258         unsigned long   flags;
 259
 260         DDB(printk("Entered dsp_get_vers()\n"));
 261         spin_lock_irqsave(&devc->lock, flags);
 262         devc->major = devc->minor = 0;
 263         sb_dsp_command(devc, 0xe1);     /* Get version */
 264
 265         for (i = 100000; i; i--)
 266         {
 267                 if (inb(DSP_DATA_AVAIL) & 0x80)
 268                 {
 269                         if (devc->major == 0)
 270                                 devc->major = inb(DSP_READ);
 271                         else
 272                         {
 273                                 devc->minor = inb(DSP_READ);
 274                                 break;
 275                         }
 276                 }
 277         }
 278         spin_unlock_irqrestore(&devc->lock, flags);
 279         DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor));
 280 }
 281
 282 static int sb16_set_dma_hw(sb_devc * devc)
 283 {
 284         int bits;
 285
 286         if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3)
 287         {
 288                 printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8);
 289                 return 0;
 290         }
 291         bits = (1 << devc->dma8);
 292
 293         if (devc->dma16 >= 5 && devc->dma16 <= 7)
 294                 bits |= (1 << devc->dma16);
 295
 296         sb_setmixer(devc, DMA_NR, bits);
 297         return 1;
 298 }
 299
 300 static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config)
 301 {
 302         /*
 303          * This routine initializes new MIDI port setup register of SB Vibra (CT2502).
 304          */
 305         unsigned char   bits = sb_getmixer(devc, 0x84) & ~0x06;
 306
 307         switch (hw_config->io_base)
 308         {
 309                 case 0x300:
 310                         sb_setmixer(devc, 0x84, bits | 0x04);
 311                         break;
 312
 313                 case 0x330:
 314                         sb_setmixer(devc, 0x84, bits | 0x00);
 315                         break;
 316
 317                 default:
 318                         sb_setmixer(devc, 0x84, bits | 0x02);           /* Disable MPU */
 319                         printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base);
 320         }
 321 }
 322
 323 static int sb16_set_irq_hw(sb_devc * devc, int level)
 324 {
 325         int ival;
 326
 327         switch (level)
 328         {
 329                 case 5:
 330                         ival = 2;
 331                         break;
 332                 case 7:
 333                         ival = 4;
 334                         break;
 335                 case 9:
 336                         ival = 1;
 337                         break;
 338                 case 10:
 339                         ival = 8;
 340                         break;
 341                 default:
 342                         printk(KERN_ERR "SB16: Invalid IRQ%d\n", level);
 343                         return 0;
 344         }
 345         sb_setmixer(devc, IRQ_NR, ival);
 346         return 1;
 347 }
 348
 349 static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config)
 350 {
 351         unsigned char bits = 0;
 352         unsigned long flags;
 353
 354         if (jazz16_base != 0 && jazz16_base != hw_config->io_base)
 355                 return;
 356
 357         switch (hw_config->io_base)
 358         {
 359                 case 0x220:
 360                         bits = 1;
 361                         break;
 362                 case 0x240:
 363                         bits = 2;
 364                         break;
 365                 case 0x260:
 366                         bits = 3;
 367                         break;
 368                 default:
 369                         return;
 370         }
 371         bits = jazz16_bits = bits << 5;
 372         jazz16_base = hw_config->io_base;
 373
 374         /*
 375          *      Magic wake up sequence by writing to 0x201 (aka Joystick port)
 376          */
 377         spin_lock_irqsave(&jazz16_lock, flags);
 378         outb((0xAF), 0x201);
 379         outb((0x50), 0x201);
 380         outb((bits), 0x201);
 381         spin_unlock_irqrestore(&jazz16_lock, flags);
 382 }
 383
 384 static int init_Jazz16(sb_devc * devc, struct address_info *hw_config)
 385 {
 386         char name[100];
 387         /*
 388          * First try to check that the card has Jazz16 chip. It identifies itself
 389          * by returning 0x12 as response to DSP command 0xfa.
 390          */
 391
 392         if (!sb_dsp_command(devc, 0xfa))
 393                 return 0;
 394
 395         if (sb_dsp_get_byte(devc) != 0x12)
 396                 return 0;
 397
 398         /*
 399          * OK so far. Now configure the IRQ and DMA channel used by the card.
 400          */
 401         if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0)
 402         {
 403                 printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq);
 404                 return 0;
 405         }
 406         if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0)
 407         {
 408                   printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma);
 409                   return 0;
 410         }
 411         if (hw_config->dma2 < 0)
 412         {
 413                 printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n");
 414                 return 0;
 415         }
 416         if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0)
 417         {
 418                 printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2);
 419                 return 0;
 420         }
 421         devc->dma16 = hw_config->dma2;
 422
 423         if (!sb_dsp_command(devc, 0xfb))
 424                 return 0;
 425
 426         if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] |
 427                         (jazz_dma_bits[hw_config->dma2] << 4)))
 428                 return 0;
 429
 430         if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq]))
 431                 return 0;
 432
 433         /*
 434          * Now we have configured a standard Jazz16 device.
 435          */
 436         devc->model = MDL_JAZZ;
 437         strcpy(name, "Jazz16");
 438
 439         hw_config->name = "Jazz16";
 440         devc->caps |= SB_NO_MIDI;
 441         return 1;
 442 }
 443
 444 static void relocate_ess1688(sb_devc * devc)
 445 {
 446         unsigned char bits;
 447
 448         switch (devc->base)
 449         {
 450                 case 0x220:
 451                         bits = 0x04;
 452                         break;
 453                 case 0x230:
 454                         bits = 0x05;
 455                         break;
 456                 case 0x240:
 457                         bits = 0x06;
 458                         break;
 459                 case 0x250:
 460                         bits = 0x07;
 461                         break;
 462                 default:
 463                         return; /* Wrong port */
 464         }
 465
 466         DDB(printk("Doing ESS1688 address selection\n"));
 467
 468         /*
 469          * ES1688 supports two alternative ways for software address config.
 470          * First try the so called Read-Sequence-Key method.
 471          */
 472
 473         /* Reset the sequence logic */
 474         inb(0x229);
 475         inb(0x229);
 476         inb(0x229);
 477
 478         /* Perform the read sequence */
 479         inb(0x22b);
 480         inb(0x229);
 481         inb(0x22b);
 482         inb(0x229);
 483         inb(0x229);
 484         inb(0x22b);
 485         inb(0x229);
 486
 487         /* Select the base address by reading from it. Then probe using the port. */
 488         inb(devc->base);
 489         if (sb_dsp_reset(devc)) /* Bingo */
 490                 return;
 491
 492 #if 0                           /* This causes system lockups (Nokia 386/25 at least) */
 493         /*
 494          * The last resort is the system control register method.
 495          */
 496
 497         outb((0x00), 0xfb);     /* 0xFB is the unlock register */
 498         outb((0x00), 0xe0);     /* Select index 0 */
 499         outb((bits), 0xe1);     /* Write the config bits */
 500         outb((0x00), 0xf9);     /* 0xFB is the lock register */
 501 #endif
 502 }
 503
 504 int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo)
 505 {
 506         sb_devc sb_info;
 507         sb_devc *devc = &sb_info;
 508
 509         memset((char *) &sb_info, 0, sizeof(sb_info));  /* Zero everything */
 510
 511         /* Copy module options in place */
 512         if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options));
 513
 514         sb_info.my_mididev = -1;
 515         sb_info.my_mixerdev = -1;
 516         sb_info.dev = -1;
 517
 518         /*
 519          * Initialize variables
 520          */
 521
 522         DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base));
 523
 524         spin_lock_init(&devc->lock);
 525         devc->type = hw_config->card_subtype;
 526
 527         devc->base = hw_config->io_base;
 528         devc->irq = hw_config->irq;
 529         devc->dma8 = hw_config->dma;
 530
 531         devc->dma16 = -1;
 532         devc->pcibase = pciio;
 533
 534         if(pci == SB_PCI_ESSMAESTRO)
 535         {
 536                 devc->model = MDL_ESSPCI;
 537                 devc->caps |= SB_PCI_IRQ;
 538                 hw_config->driver_use_1 |= SB_PCI_IRQ;
 539                 hw_config->card_subtype = MDL_ESSPCI;
 540         }
 541
 542         if(pci == SB_PCI_YAMAHA)
 543         {
 544                 devc->model = MDL_YMPCI;
 545                 devc->caps |= SB_PCI_IRQ;
 546                 hw_config->driver_use_1 |= SB_PCI_IRQ;
 547                 hw_config->card_subtype = MDL_YMPCI;
 548
 549                 printk("Yamaha PCI mode.\n");
 550         }
 551
 552         if (devc->sbmo.acer)
 553         {
 554                 unsigned long flags;
 555
 556                 spin_lock_irqsave(&devc->lock, flags);
 557                 inb(devc->base + 0x09);
 558                 inb(devc->base + 0x09);
 559                 inb(devc->base + 0x09);
 560                 inb(devc->base + 0x0b);
 561                 inb(devc->base + 0x09);
 562                 inb(devc->base + 0x0b);
 563                 inb(devc->base + 0x09);
 564                 inb(devc->base + 0x09);
 565                 inb(devc->base + 0x0b);
 566                 inb(devc->base + 0x09);
 567                 inb(devc->base + 0x00);
 568                 spin_unlock_irqrestore(&devc->lock, flags);
 569         }
 570         /*
 571          * Detect the device
 572          */
 573
 574         if (sb_dsp_reset(devc))
 575                 dsp_get_vers(devc);
 576         else
 577                 devc->major = 0;
 578
 579         if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW)
 580                 if (devc->major == 0 || (devc->major == 3 && devc->minor == 1))
 581                         relocate_Jazz16(devc, hw_config);
 582
 583         if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0))
 584                 relocate_ess1688(devc);
 585
 586         if (!sb_dsp_reset(devc))
 587         {
 588                 DDB(printk("SB reset failed\n"));
 589 #ifdef MODULE
 590                 printk(KERN_INFO "sb: dsp reset failed.\n");
 591 #endif
 592                 return 0;
 593         }
 594         if (devc->major == 0)
 595                 dsp_get_vers(devc);
 596
 597         if (devc->major == 3 && devc->minor == 1)
 598         {
 599                 if (devc->type == MDL_AZTECH)           /* SG Washington? */
 600                 {
 601                         if (sb_dsp_command(devc, 0x09))
 602                                 if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */
 603                                 {
 604                                         int i;
 605
 606                                         /* Have some delay */
 607                                         for (i = 0; i < 10000; i++)
 608                                                 inb(DSP_DATA_AVAIL);
 609                                         devc->caps = SB_NO_AUDIO | SB_NO_MIDI;  /* Mixer only */
 610                                         devc->model = MDL_AZTECH;
 611                                 }
 612                 }
 613         }
 614
 615         if(devc->type == MDL_ESSPCI)
 616                 devc->model = MDL_ESSPCI;
 617
 618         if(devc->type == MDL_YMPCI)
 619         {
 620                 printk("YMPCI selected\n");
 621                 devc->model = MDL_YMPCI;
 622         }
 623
 624         /*
 625          * Save device information for sb_dsp_init()
 626          */
 627
 628
 629         detected_devc = kmemdup(devc, sizeof(sb_devc), GFP_KERNEL);
 630         if (detected_devc == NULL)
 631         {
 632                 printk(KERN_ERR "sb: Can't allocate memory for device information\n");
 633                 return 0;
 634         }
 635         MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base));
 636         return 1;
 637 }
 638
 639 int sb_dsp_init(struct address_info *hw_config, struct module *owner)
 640 {
 641         sb_devc *devc;
 642         char name[100];
 643         extern int sb_be_quiet;
 644         int     mixer22, mixer30;
 645
 646 /*
 647  * Check if we had detected a SB device earlier
 648  */
 649         DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base));
 650         name[0] = 0;
 651
 652         if (detected_devc == NULL)
 653         {
 654                 MDB(printk("No detected device\n"));
 655                 return 0;
 656         }
 657         devc = detected_devc;
 658         detected_devc = NULL;
 659
 660         if (devc->base != hw_config->io_base)
 661         {
 662                 DDB(printk("I/O port mismatch\n"));
 663                 release_region(devc->base, 16);
 664                 return 0;
 665         }
 666         /*
 667          * Now continue initialization of the device
 668          */
 669
 670         devc->caps = hw_config->driver_use_1;
 671
 672         if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0)
 673         {                       /* IRQ setup */
 674
 675                 /*
 676                  *      ESS PCI cards do shared PCI IRQ stuff. Since they
 677                  *      will get shared PCI irq lines we must cope.
 678                  */
 679
 680                 int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0;
 681
 682                 if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0)
 683                 {
 684                         printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq);
 685                         release_region(devc->base, 16);
 686                         return 0;
 687                 }
 688                 devc->irq_ok = 0;
 689
 690                 if (devc->major == 4)
 691                         if (!sb16_set_irq_hw(devc, devc->irq))  /* Unsupported IRQ */
 692                         {
 693                                 free_irq(devc->irq, devc);
 694                                 release_region(devc->base, 16);
 695                                 return 0;
 696                         }
 697                 if ((devc->type == 0 || devc->type == MDL_ESS) &&
 698                         devc->major == 3 && devc->minor == 1)
 699                 {               /* Handle various chipsets which claim they are SB Pro compatible */
 700                         if ((devc->type != 0 && devc->type != MDL_ESS) ||
 701                                 !ess_init(devc, hw_config))
 702                         {
 703                                 if ((devc->type != 0 && devc->type != MDL_JAZZ &&
 704                                          devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config))
 705                                 {
 706                                         DDB(printk("This is a genuine SB Pro\n"));
 707                                 }
 708                         }
 709                 }
 710                 if (devc->major == 4 && devc->minor <= 11 )     /* Won't work */
 711                         devc->irq_ok = 1;
 712                 else
 713                 {
 714                         int n;
 715
 716                         for (n = 0; n < 3 && devc->irq_ok == 0; n++)
 717                         {
 718                                 if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */
 719                                 {
 720                                         int i;
 721
 722                                         for (i = 0; !devc->irq_ok && i < 10000; i++);
 723                                 }
 724                         }
 725                         if (!devc->irq_ok)
 726                                 printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq);
 727                         else
 728                         {
 729                                 DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq));
 730                         }
 731                 }
 732         }                       /* IRQ setup */
 733
 734         last_sb = devc;
 735
 736         switch (devc->major)
 737         {
 738                 case 1:         /* SB 1.0 or 1.5 */
 739                         devc->model = hw_config->card_subtype = MDL_SB1;
 740                         break;
 741
 742                 case 2:         /* SB 2.x */
 743                         if (devc->minor == 0)
 744                                 devc->model = hw_config->card_subtype = MDL_SB2;
 745                         else
 746                                 devc->model = hw_config->card_subtype = MDL_SB201;
 747                         break;
 748
 749                 case 3:         /* SB Pro and most clones */
 750                         switch (devc->model) {
 751                         case 0:
 752                                 devc->model = hw_config->card_subtype = MDL_SBPRO;
 753                                 if (hw_config->name == NULL)
 754                                         hw_config->name = "Sound Blaster Pro (8 BIT ONLY)";
 755                                 break;
 756                         case MDL_ESS:
 757                                 ess_dsp_init(devc, hw_config);
 758                                 break;
 759                         }
 760                         break;
 761
 762                 case 4:
 763                         devc->model = hw_config->card_subtype = MDL_SB16;
 764                         /*
 765                          * ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0
 766                          * registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas
 767                          * a "standard" SB16 doesn't have a register at 0x4c.  ALS100 actively
 768                          * updates register 0x22 whenever 0x30 changes, as per the SB16 spec.
 769                          * Since ALS007 doesn't, this can be used to differentiate the 2 cards.
 770                          */
 771                         if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c))
 772                         {
 773                                 mixer30 = sb_getmixer(devc,0x30);
 774                                 sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f);
 775                                 sb_setmixer(devc,0x30,0xff);
 776                                 /* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */
 777                                 /* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10.     */
 778                                 if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10))
 779                                 {
 780                                         devc->submodel = SUBMDL_ALS100;
 781                                         if (hw_config->name == NULL)
 782                                                 hw_config->name = "Sound Blaster 16 (ALS-100)";
 783                                 }
 784                                 else
 785                                 {
 786                                         sb_setmixer(devc,0x3c,0x1f);    /* Enable all inputs */
 787                                         sb_setmixer(devc,0x4c,0x1f);
 788                                         sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */
 789                                         devc->submodel = SUBMDL_ALS007;
 790                                         if (hw_config->name == NULL)
 791                                                 hw_config->name = "Sound Blaster 16 (ALS-007)";
 792                                 }
 793                                 sb_setmixer(devc,0x30,mixer30);
 794                         }
 795                         else if (hw_config->name == NULL)
 796                                 hw_config->name = "Sound Blaster 16";
 797
 798                         if (hw_config->dma2 == -1)
 799                                 devc->dma16 = devc->dma8;
 800                         else if (hw_config->dma2 < 5 || hw_config->dma2 > 7)
 801                         {
 802                                 printk(KERN_WARNING  "SB16: Bad or missing 16 bit DMA channel\n");
 803                                 devc->dma16 = devc->dma8;
 804                         }
 805                         else
 806                                 devc->dma16 = hw_config->dma2;
 807
 808                         if(!sb16_set_dma_hw(devc)) {
 809                                 free_irq(devc->irq, devc);
 810                                 release_region(hw_config->io_base, 16);
 811                                 return 0;
 812                         }
 813
 814                         devc->caps |= SB_NO_MIDI;
 815         }
 816
 817         if (!(devc->caps & SB_NO_MIXER))
 818                 if (devc->major == 3 || devc->major == 4)
 819                         sb_mixer_init(devc, owner);
 820
 821         if (!(devc->caps & SB_NO_MIDI))
 822                 sb_dsp_midi_init(devc, owner);
 823
 824         if (hw_config->name == NULL)
 825                 hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)";
 826
 827         sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor);
 828         conf_printf(name, hw_config);
 829
 830         /*
 831          * Assuming that a sound card is Sound Blaster (compatible) is the most common
 832          * configuration error and the mother of all problems. Usually sound cards
 833          * emulate SB Pro but in addition they have a 16 bit native mode which should be
 834          * used in Unix. See Readme.cards for more information about configuring OSS/Free
 835          * properly.
 836          */
 837         if (devc->model <= MDL_SBPRO)
 838         {
 839                 if (devc->major == 3 && devc->minor != 1)       /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */
 840                 {
 841                         printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n");
 842                         printk(KERN_INFO "In many cases there is another way to configure OSS so that\n");
 843                         printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n");
 844                         printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n");
 845                 }
 846                 else if (!sb_be_quiet && devc->model == MDL_SBPRO)
 847                 {
 848                         printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor);
 849                         printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n");
 850                         printk(KERN_INFO "is incorrectly configured.\n");
 851                 }
 852         }
 853         hw_config->card_subtype = devc->model;
 854         hw_config->slots[0]=devc->dev;
 855         last_devc = devc;       /* For SB MPU detection */
 856
 857         if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0)
 858         {
 859                 if (sound_alloc_dma(devc->dma8, "SoundBlaster8"))
 860                 {
 861                         printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8);
 862                 }
 863                 if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
 864                 {
 865                         if (sound_alloc_dma(devc->dma16, "SoundBlaster16"))
 866                                 printk(KERN_WARNING "Sound Blaster:  can't allocate 16 bit DMA channel %d.\n", devc->dma16);
 867                 }
 868                 sb_audio_init(devc, name, owner);
 869                 hw_config->slots[0]=devc->dev;
 870         }
 871         else
 872         {
 873                 MDB(printk("Sound Blaster:  no audio devices found.\n"));
 874         }
 875         return 1;
 876 }
 877
 878 /* if (sbmpu) below we allow mpu401 to manage the midi devs
 879    otherwise we have to unload them. (Andrzej Krzysztofowicz) */
 880
 881 void sb_dsp_unload(struct address_info *hw_config, int sbmpu)
 882 {
 883         sb_devc *devc;
 884
 885         devc = audio_devs[hw_config->slots[0]]->devc;
 886
 887         if (devc && devc->base == hw_config->io_base)
 888         {
 889                 if ((devc->model & MDL_ESS) && devc->pcibase)
 890                         release_region(devc->pcibase, 8);
 891
 892                 release_region(devc->base, 16);
 893
 894                 if (!(devc->caps & SB_NO_AUDIO))
 895                 {
 896                         sound_free_dma(devc->dma8);
 897                         if (devc->dma16 >= 0)
 898                                 sound_free_dma(devc->dma16);
 899                 }
 900                 if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI))
 901                 {
 902                         if (devc->irq > 0)
 903                                 free_irq(devc->irq, devc);
 904
 905                         sb_mixer_unload(devc);
 906                         /* We don't have to do this bit any more the UART401 is its own
 907                                 master  -- Krzysztof Halasa */
 908                         /* But we have to do it, if UART401 is not detected */
 909                         if (!sbmpu)
 910                                 sound_unload_mididev(devc->my_mididev);
 911                         sound_unload_audiodev(devc->dev);
 912                 }
 913                 kfree(devc);
 914         }
 915         else
 916                 release_region(hw_config->io_base, 16);
 917
 918         kfree(detected_devc);
 919 }
 920
 921 /*
 922  *      Mixer access routines
 923  *
 924  *      ES1887 modifications: some mixer registers reside in the
 925  *      range above 0xa0. These must be accessed in another way.
 926  */
 927
 928 void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value)
 929 {
 930         unsigned long flags;
 931
 932         if (devc->model == MDL_ESS) {
 933                 ess_setmixer (devc, port, value);
 934                 return;
 935         }
 936
 937         spin_lock_irqsave(&devc->lock, flags);
 938
 939         outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
 940         udelay(20);
 941         outb(((unsigned char) (value & 0xff)), MIXER_DATA);
 942         udelay(20);
 943
 944         spin_unlock_irqrestore(&devc->lock, flags);
 945 }
 946
 947 unsigned int sb_getmixer(sb_devc * devc, unsigned int port)
 948 {
 949         unsigned int val;
 950         unsigned long flags;
 951
 952         if (devc->model == MDL_ESS) return ess_getmixer (devc, port);
 953
 954         spin_lock_irqsave(&devc->lock, flags);
 955
 956         outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
 957         udelay(20);
 958         val = inb(MIXER_DATA);
 959         udelay(20);
 960
 961         spin_unlock_irqrestore(&devc->lock, flags);
 962
 963         return val;
 964 }
 965
 966 void sb_chgmixer
 967         (sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
 968 {
 969         int value;
 970
 971         value = sb_getmixer(devc, reg);
 972         value = (value & ~mask) | (val & mask);
 973         sb_setmixer(devc, reg, value);
 974 }
 975
 976 /*
 977  *      MPU401 MIDI initialization.
 978  */
 979
 980 static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val)
 981 {
 982         unsigned long flags;
 983
 984         spin_lock_irqsave(&jazz16_lock, flags);  /* NOT the SB card? */
 985
 986         outb((addr & 0xff), base + 1);  /* Low address bits */
 987         outb((addr >> 8), base + 2);    /* High address bits */
 988         outb((val), base);      /* Data */
 989
 990         spin_unlock_irqrestore(&jazz16_lock, flags);
 991 }
 992
 993 static unsigned char smw_getmem(sb_devc * devc, int base, int addr)
 994 {
 995         unsigned long flags;
 996         unsigned char val;
 997
 998         spin_lock_irqsave(&jazz16_lock, flags);  /* NOT the SB card? */
 999
1000         outb((addr & 0xff), base + 1);  /* Low address bits */
1001         outb((addr >> 8), base + 2);    /* High address bits */
1002         val = inb(base);        /* Data */
1003
1004         spin_unlock_irqrestore(&jazz16_lock, flags);
1005         return val;
1006 }
1007
1008 static int smw_midi_init(sb_devc * devc, struct address_info *hw_config)
1009 {
1010         int mpu_base = hw_config->io_base;
1011         int mp_base = mpu_base + 4;             /* Microcontroller base */
1012         int i;
1013         unsigned char control;
1014
1015
1016         /*
1017          *  Reset the microcontroller so that the RAM can be accessed
1018          */
1019
1020         control = inb(mpu_base + 7);
1021         outb((control | 3), mpu_base + 7);      /* Set last two bits to 1 (?) */
1022         outb(((control & 0xfe) | 2), mpu_base + 7);     /* xxxxxxx0 resets the mc */
1023
1024         mdelay(3);      /* Wait at least 1ms */
1025
1026         outb((control & 0xfc), mpu_base + 7);   /* xxxxxx00 enables RAM */
1027
1028         /*
1029          *  Detect microcontroller by probing the 8k RAM area
1030          */
1031         smw_putmem(devc, mp_base, 0, 0x00);
1032         smw_putmem(devc, mp_base, 1, 0xff);
1033         udelay(10);
1034
1035         if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff)
1036         {
1037                 DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1)));
1038                 return 0;       /* No RAM */
1039         }
1040         /*
1041          *  There is RAM so assume it's really a SM Wave
1042          */
1043
1044         devc->model = MDL_SMW;
1045         smw_mixer_init(devc);
1046
1047 #ifdef MODULE
1048         if (!smw_ucode)
1049         {
1050                 smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode);
1051                 smw_free = smw_ucode;
1052         }
1053 #endif
1054         if (smw_ucodeLen > 0)
1055         {
1056                 if (smw_ucodeLen != 8192)
1057                 {
1058                         printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n");
1059                         return 1;
1060                 }
1061                 /*
1062                  *  Download microcode
1063                  */
1064
1065                 for (i = 0; i < 8192; i++)
1066                         smw_putmem(devc, mp_base, i, smw_ucode[i]);
1067
1068                 /*
1069                  *  Verify microcode
1070                  */
1071
1072                 for (i = 0; i < 8192; i++)
1073                         if (smw_getmem(devc, mp_base, i) != smw_ucode[i])
1074                         {
1075                                 printk(KERN_ERR "SM Wave: Microcode verification failed\n");
1076                                 return 0;
1077                         }
1078         }
1079         control = 0;
1080 #ifdef SMW_SCSI_IRQ
1081         /*
1082          * Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt
1083          * is disabled by default.
1084          *
1085          * FIXME - make this a module option
1086          *
1087          * BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10.
1088          */
1089         {
1090                 static unsigned char scsi_irq_bits[] = {
1091                         0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0
1092                 };
1093                 control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6;
1094         }
1095 #endif
1096
1097 #ifdef SMW_OPL4_ENABLE
1098         /*
1099          *  Make the OPL4 chip visible on the PC bus at 0x380.
1100          *
1101          *  There is no need to enable this feature since this driver
1102          *  doesn't support OPL4 yet. Also there is no RAM in SM Wave so
1103          *  enabling OPL4 is pretty useless.
1104          */
1105         control |= 0x10;        /* Uses IRQ12 if bit 0x20 == 0 */
1106         /* control |= 0x20;      Uncomment this if you want to use IRQ7 */
1107 #endif
1108         outb((control | 0x03), mpu_base + 7);   /* xxxxxx11 restarts */
1109         hw_config->name = "SoundMan Wave";
1110         return 1;
1111 }
1112
1113 static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config)
1114 {
1115         int mpu_base = hw_config->io_base;
1116         int sb_base = devc->base;
1117         int irq = hw_config->irq;
1118
1119         unsigned char bits = 0;
1120         unsigned long flags;
1121
1122         if (irq < 0)
1123                 irq *= -1;
1124
1125         if (irq < 1 || irq > 15 ||
1126             jazz_irq_bits[irq] == 0)
1127         {
1128                 printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq);
1129                 return 0;
1130         }
1131         switch (sb_base)
1132         {
1133                 case 0x220:
1134                         bits = 1;
1135                         break;
1136                 case 0x240:
1137                         bits = 2;
1138                         break;
1139                 case 0x260:
1140                         bits = 3;
1141                         break;
1142                 default:
1143                         return 0;
1144         }
1145         bits = jazz16_bits = bits << 5;
1146         switch (mpu_base)
1147         {
1148                 case 0x310:
1149                         bits |= 1;
1150                         break;
1151                 case 0x320:
1152                         bits |= 2;
1153                         break;
1154                 case 0x330:
1155                         bits |= 3;
1156                         break;
1157                 default:
1158                         printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base);
1159                         return 0;
1160         }
1161         /*
1162          *      Magic wake up sequence by writing to 0x201 (aka Joystick port)
1163          */
1164         spin_lock_irqsave(&jazz16_lock, flags);
1165         outb(0xAF, 0x201);
1166         outb(0x50, 0x201);
1167         outb(bits, 0x201);
1168         spin_unlock_irqrestore(&jazz16_lock, flags);
1169
1170         hw_config->name = "Jazz16";
1171         smw_midi_init(devc, hw_config);
1172
1173         if (!sb_dsp_command(devc, 0xfb))
1174                 return 0;
1175
1176         if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] |
1177                             (jazz_dma_bits[devc->dma16] << 4)))
1178                 return 0;
1179
1180         if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] |
1181                             (jazz_irq_bits[irq] << 4)))
1182                 return 0;
1183
1184         return 1;
1185 }
1186
1187 int probe_sbmpu(struct address_info *hw_config, struct module *owner)
1188 {
1189         sb_devc *devc = last_devc;
1190         int ret;
1191
1192         if (last_devc == NULL)
1193                 return 0;
1194
1195         last_devc = NULL;
1196
1197         if (hw_config->io_base <= 0)
1198         {
1199                 /* The real vibra16 is fine about this, but we have to go
1200                    wipe up after Cyrix again */
1201
1202                 if(devc->model == MDL_SB16 && devc->minor >= 12)
1203                 {
1204                         unsigned char   bits = sb_getmixer(devc, 0x84) & ~0x06;
1205                         sb_setmixer(devc, 0x84, bits | 0x02);           /* Disable MPU */
1206                 }
1207                 return 0;
1208         }
1209
1210 #if defined(CONFIG_SOUND_MPU401)
1211         if (devc->model == MDL_ESS)
1212         {
1213                 struct resource *ports;
1214                 ports = request_region(hw_config->io_base, 2, "mpu401");
1215                 if (!ports) {
1216                         printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base);
1217                         return 0;
1218                 }
1219                 if (!ess_midi_init(devc, hw_config)) {
1220                         release_region(hw_config->io_base, 2);
1221                         return 0;
1222                 }
1223                 hw_config->name = "ESS1xxx MPU";
1224                 devc->midi_irq_cookie = NULL;
1225                 if (!probe_mpu401(hw_config, ports)) {
1226                         release_region(hw_config->io_base, 2);
1227                         return 0;
1228                 }
1229                 attach_mpu401(hw_config, owner);
1230                 if (last_sb->irq == -hw_config->irq)
1231                         last_sb->midi_irq_cookie =
1232                                 (void *)(long) hw_config->slots[1];
1233                 return 1;
1234         }
1235 #endif
1236
1237         switch (devc->model)
1238         {
1239                 case MDL_SB16:
1240                         if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330)
1241                         {
1242                                 printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base);
1243                                 return 0;
1244                         }
1245                         hw_config->name = "Sound Blaster 16";
1246                         if (hw_config->irq < 3 || hw_config->irq == devc->irq)
1247                                 hw_config->irq = -devc->irq;
1248                         if (devc->minor > 12)           /* What is Vibra's version??? */
1249                                 sb16_set_mpu_port(devc, hw_config);
1250                         break;
1251
1252                 case MDL_JAZZ:
1253                         if (hw_config->irq < 3 || hw_config->irq == devc->irq)
1254                                 hw_config->irq = -devc->irq;
1255                         if (!init_Jazz16_midi(devc, hw_config))
1256                                 return 0;
1257                         break;
1258
1259                 case MDL_YMPCI:
1260                         hw_config->name = "Yamaha PCI Legacy";
1261                         printk("Yamaha PCI legacy UART401 check.\n");
1262                         break;
1263                 default:
1264                         return 0;
1265         }
1266
1267         ret = probe_uart401(hw_config, owner);
1268         if (ret)
1269                 last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc;
1270         return ret;
1271 }
1272
1273 void unload_sbmpu(struct address_info *hw_config)
1274 {
1275 #if defined(CONFIG_SOUND_MPU401)
1276         if (!strcmp (hw_config->name, "ESS1xxx MPU")) {
1277                 unload_mpu401(hw_config);
1278                 return;
1279         }
1280 #endif
1281         unload_uart401(hw_config);
1282 }
1283
1284 EXPORT_SYMBOL(sb_dsp_init);
1285 EXPORT_SYMBOL(sb_dsp_detect);
1286 EXPORT_SYMBOL(sb_dsp_unload);
1287 EXPORT_SYMBOL(sb_be_quiet);
1288 EXPORT_SYMBOL(probe_sbmpu);
1289 EXPORT_SYMBOL(unload_sbmpu);
1290 EXPORT_SYMBOL(smw_free);
1291 MODULE_LICENSE("GPL");