2 * slattach A program for handling dialup IP connecions.
3 * This program forces a TTY line to go into a special
4 * terminal line discipline, so that it can be used for
5 * network traffic instead of the regular terminal I/O.
7 * Usage: slattach [-ehlmnqv] [ -k keepalive ] [ -o outfill ]
8 * [-c cmd] [-s speed] [-p protocol] tty | -
10 * Version: @(#)slattach.c 1.20 1999-05-29
12 * Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
13 * Copyright 1988-1993 MicroWalt Corporation
16 * Alan Cox, <A.Cox@swansea.ac.uk> , July 16 1994
17 * Miquel van Smoorenburg, <miquels@drinkel.ow.org>, October 1994
18 * George Shearer, <gshearer@one.net>, January 3, 1995
19 * Yossi Gottlieb, <yogo@math.tau.ac.il>, February 11, 1995
20 * Peter Tobias, <tobias@et-inf.fho-emden.de>, July 30 1995
21 * Bernd Eckenfels <net-tools@lina.inka.de>, May 29, 1999
22 * added some more printf's for debug and NOBLOCK to open
23 * this should be enough to support 2.2 ttyS-style locks
25 * This program is free software; you can redistribute it
26 * and/or modify it under the terms of the GNU General
27 * Public License as published by the Free Software
28 * Foundation; either version 2 of the License, or (at
29 * your option) any later version.
31 #include <sys/param.h>
32 #include <sys/types.h>
33 #include <sys/socket.h>
34 #include <sys/ioctl.h>
47 #include <linux/if_slip.h>
49 #if defined(__GLIBC__)
50 #if __GLIBC__ == 2 && __GLIBC_MINOR__ == 0
51 # include <termbits.h>
57 #include "pathnames.h"
58 #include "net-support.h"
65 #define _PATH_LOCKD "/var/lock" /* lock files */
68 #define _UID_UUCP "uucp" /* owns locks */
72 #define DEF_PROTO "cslip"
75 char *Release = RELEASE,
76 *Version = "@(#) slattach 1.20 (1999-05-29)",
77 *Signature = "net-tools, Fred N. van Kempen et al.";
83 } tty_speeds[] = { /* table of usable baud rates */
84 { "50", B50 }, { "75", B75 },
85 { "110", B110 }, { "300", B300 },
86 { "600", B600 }, { "1200", B1200 },
87 { "2400", B2400 }, { "4800", B4800 },
102 { "115200", B115200 },
106 struct termios tty_saved, /* saved TTY device state */
107 tty_current; /* current TTY device state */
108 int tty_sdisc, /* saved TTY line discipline */
109 tty_ldisc, /* current TTY line discipline */
110 tty_fd = -1; /* TTY file descriptor */
111 int opt_c = 0; /* "command" to run at exit */
112 int opt_e = 0; /* "activate only" flag */
113 int opt_h = 0; /* "hangup" on carrier loss */
114 #ifdef SIOCSKEEPALIVE
115 int opt_k = 0; /* "keepalive" value */
117 int opt_l = 0; /* "lock it" flag */
118 int opt_L = 0; /* clocal flag */
119 int opt_m = 0; /* "set RAW mode" flag */
120 int opt_n = 0; /* "set No Mesg" flag */
122 int opt_o = 0; /* "outfill" value */
124 int opt_q = 0; /* "quiet" flag */
125 int opt_d = 0; /* debug flag */
126 int opt_v = 0; /* Verbose flag */
128 /* Disable any messages to the input channel of this process. */
132 if (opt_n == 0) return(0);
133 return(fchmod(fd, 0600));
136 /* Check for an existing lock file on our device */
138 tty_already_locked(char *nam)
141 FILE *fd = (FILE *)0;
143 /* Does the lock file on our device exist? */
144 if ((fd = fopen(nam, "r")) == (FILE *)0)
145 return(0); /* No, return perm to continue */
147 /* Yes, the lock is there. Now let's make sure */
148 /* at least there's no active process that owns */
150 i = fscanf(fd, "%d", &pid);
153 if (i != 1) /* Lock file format's wrong! Kill't */
156 /* We got the pid, check if the process's alive */
157 if (kill(pid, 0) == 0) /* it found process */
158 return(1); /* Yup, it's running... */
160 /* Dead, we can proceed locking this device... */
164 /* Lock or unlock a terminal line. */
166 tty_lock(char *path, int mode)
168 static char saved_path[PATH_MAX];
169 static int saved_lock = 0;
174 /* We do not lock standard input. */
175 if ((opt_l == 0) || ((path == NULL) && (saved_lock == 0))) return(0);
177 if (mode == 1) { /* lock */
178 sprintf(saved_path, "%s/LCK..%s", _PATH_LOCKD, path);
179 if (tty_already_locked(saved_path)) {
180 fprintf(stderr, _("slattach: /dev/%s already locked!\n"), path);
183 if ((fd = creat(saved_path, 0644)) < 0) {
185 if (opt_q == 0) fprintf(stderr,
186 _("slattach: tty_lock: (%s): %s\n"),
187 saved_path, strerror(errno));
190 sprintf(apid, "%10d\n", getpid());
191 if (write(fd, apid, strlen(apid)) != strlen(apid)) {
192 fprintf(stderr, _("slattach: cannot write PID file\n"));
200 /* Make sure UUCP owns the lockfile. Required by some packages. */
201 if ((pw = getpwnam(_UID_UUCP)) == NULL) {
202 if (opt_q == 0) fprintf(stderr, _("slattach: tty_lock: UUCP user %s unknown!\n"),
204 return(0); /* keep the lock anyway */
206 (void) chown(saved_path, pw->pw_uid, pw->pw_gid);
208 } else { /* unlock */
209 if (saved_lock != 1) return(0);
210 if (unlink(saved_path) < 0) {
211 if (opt_q == 0) fprintf(stderr,
212 "slattach: tty_unlock: (%s): %s\n", saved_path,
223 /* Find a serial speed code in the table. */
225 tty_find_speed(char *speed)
230 while (tty_speeds[i].speed != NULL) {
231 if (!strcmp(tty_speeds[i].speed, speed)) return(tty_speeds[i].code);
238 /* Set the number of stop bits. */
240 tty_set_stopbits(struct termios *tty, char *stopbits)
242 if (opt_d) printf("slattach: tty_set_stopbits: %c\n", *stopbits);
245 tty->c_cflag &= ~CSTOPB;
249 tty->c_cflag |= CSTOPB;
259 /* Set the number of data bits. */
261 tty_set_databits(struct termios *tty, char *databits)
263 if (opt_d) printf("slattach: tty_set_databits: %c\n", *databits);
264 tty->c_cflag &= ~CSIZE;
289 /* Set the type of parity encoding. */
291 tty_set_parity(struct termios *tty, char *parity)
293 if (opt_d) printf("slattach: tty_set_parity: %c\n", *parity);
294 switch(toupper(*parity)) {
296 tty->c_cflag &= ~(PARENB | PARODD);
300 tty->c_cflag &= ~(PARENB | PARODD);
301 tty->c_cflag |= (PARENB | PARODD);
305 tty->c_cflag &= ~(PARENB | PARODD);
306 tty->c_cflag |= (PARENB);
316 /* Set the line speed of a terminal line. */
318 tty_set_speed(struct termios *tty, char *speed)
322 if (opt_d) printf("slattach: tty_set_speed: %s\n", speed);
323 if ((code = tty_find_speed(speed)) < 0) return(code);
324 tty->c_cflag &= ~CBAUD;
325 tty->c_cflag |= code;
330 /* Put a terminal line in a transparent state. */
332 tty_set_raw(struct termios *tty)
337 for(i = 0; i < NCCS; i++)
338 tty->c_cc[i] = '\0'; /* no spec chr */
340 tty->c_cc[VTIME] = 0;
341 tty->c_iflag = (IGNBRK | IGNPAR); /* input flags */
342 tty->c_oflag = (0); /* output flags */
343 tty->c_lflag = (0); /* local flags */
344 speed = (tty->c_cflag & CBAUD); /* save current speed */
345 tty->c_cflag = (CRTSCTS | HUPCL | CREAD); /* UART flags */
347 tty->c_cflag |= CLOCAL;
348 tty->c_cflag |= speed; /* restore speed */
353 /* Fetch the state of a terminal. */
355 tty_get_state(struct termios *tty)
357 if (ioctl(tty_fd, TCGETS, tty) < 0) {
358 if (opt_q == 0) fprintf(stderr,
359 "slattach: tty_get_state: %s\n", strerror(errno));
366 /* Set the state of a terminal. */
368 tty_set_state(struct termios *tty)
370 if (ioctl(tty_fd, TCSETS, tty) < 0) {
371 if (opt_q == 0) fprintf(stderr,
372 "slattach: tty_set_state: %s\n", strerror(errno));
379 /* Get the line discipline of a terminal line. */
381 tty_get_disc(int *disc)
383 if (ioctl(tty_fd, TIOCGETD, disc) < 0) {
384 if (opt_q == 0) fprintf(stderr,
385 "slattach: tty_get_disc: %s\n", strerror(errno));
392 /* Set the line discipline of a terminal line. */
394 tty_set_disc(int disc)
396 if (disc == -1) disc = tty_sdisc;
398 if (ioctl(tty_fd, TIOCSETD, &disc) < 0) {
399 if (opt_q == 0) fprintf(stderr,
400 "slattach: tty_set_disc(%d, %d): %s\n", tty_fd,
401 disc, strerror(errno));
408 /* Fetch the name of the network interface attached to this terminal. */
410 tty_get_name(char *name)
412 if (ioctl(tty_fd, SIOCGIFNAME, name) < 0) {
413 if (opt_q == 0) fprintf(stderr,
414 "slattach: tty_get_name: %s\n", strerror(errno));
421 /* Hangup the line. */
428 (void) tty_set_speed(&tty, "0");
429 if (tty_set_state(&tty) < 0) {
430 if (opt_q == 0) fprintf(stderr, _("slattach: tty_hangup(DROP): %s\n"), strerror(errno));
436 if (tty_set_state(&tty_current) < 0) {
437 if (opt_q == 0) fprintf(stderr, _("slattach: tty_hangup(RAISE): %s\n"), strerror(errno));
444 /* Close down a terminal line. */
448 (void) tty_set_disc(tty_sdisc);
450 (void) tty_lock(NULL, 0);
455 /* Open and initialize a terminal line. */
457 tty_open(char *name, char *speed)
463 /* Try opening the TTY device. */
465 if ((sp = strrchr(name, '/')) != (char *)NULL) *sp++ = '\0';
467 sprintf(path, "/dev/%s", sp);
468 if (opt_d) printf("slattach: tty_open: looking for lock\n");
469 if (tty_lock(sp, 1)) return(-1); /* can we lock the device? */
470 if (opt_d) printf("slattach: tty_open: trying to open %s\n", path);
471 if ((fd = open(path, O_RDWR|O_NDELAY)) < 0) {
472 if (opt_q == 0) fprintf(stderr,
473 "slattach: tty_open(%s, RW): %s\n",
474 path, strerror(errno));
478 if (opt_d) printf("slattach: tty_open: %s (fd=%d) ", path, fd);
484 /* Fetch the current state of the terminal. */
485 if (tty_get_state(&tty_saved) < 0) {
486 if (opt_q == 0) fprintf(stderr, _("slattach: tty_open: cannot get current state!\n"));
489 tty_current = tty_saved;
491 /* Fetch the current line discipline of this terminal. */
492 if (tty_get_disc(&tty_sdisc) < 0) {
493 if (opt_q == 0) fprintf(stderr, _("slattach: tty_open: cannot get current line disc!\n"));
496 tty_ldisc = tty_sdisc;
498 /* Put this terminal line in a 8-bit transparent mode. */
500 if (tty_set_raw(&tty_current) < 0) {
501 if (opt_q == 0) fprintf(stderr, _("slattach: tty_open: cannot set RAW mode!\n"));
505 /* Set the default speed if we need to. */
507 if (tty_set_speed(&tty_current, speed) != 0) {
508 if (opt_q == 0) fprintf(stderr, _("slattach: tty_open: cannot set %s bps!\n"),
514 /* Set up a completely 8-bit clean line. */
515 if (tty_set_databits(&tty_current, "8") ||
516 tty_set_stopbits(&tty_current, "1") ||
517 tty_set_parity(&tty_current, "N")) {
518 if (opt_q == 0) fprintf(stderr, _("slattach: tty_open: cannot set 8N1 mode!\n"));
522 /* Set the new line mode. */
523 if ((fd = tty_set_state(&tty_current)) < 0) return(fd);
526 /* OK, line is open. Do we need to "silence" it? */
527 (void) tty_nomesg(tty_fd);
533 /* Catch any signals. */
537 /* (void) signal(sig, sig_catch); */
546 char *usage_msg = "Usage: slattach [-ehlLmnqv] "
547 #ifdef SIOCSKEEPALIVE
553 "[-c cmd] [-s speed] [-p protocol] tty | -\n"
554 " slattach -V | --version\n";
556 fprintf(stderr, usage_msg);
564 printf("%s\n%s\n%s\n", Release, Version, Signature);
570 main(int argc, char *argv[])
575 char *proto = DEF_PROTO;
576 char *extcmd = (char *)0;
580 static struct option longopts[] = {
581 { "version", 0, NULL, 'V' },
587 /* Scan command line for any arguments. */
589 while ((s = getopt_long(argc, argv, "c:ehlLmnp:qs:vdVk:o:", longopts, NULL)) != EOF) switch(s) {
602 #ifdef SIOCSKEEPALIVE
604 opt_k = atoi(optarg);
626 opt_o = atoi(optarg);
661 /* Check the protocol. */
662 if ((ht = get_hwtype(proto)) == NULL && strcmp(proto, "tty")) {
663 if (opt_q == 0) fprintf(stderr, _("slattach: unsupported protocol %s\n"), proto);
666 if (ht == NULL) opt_m++;
668 /* Is a terminal given? */
669 if (optind != (argc - 1)) usage();
670 safe_strncpy(path, argv[optind], sizeof(path));
671 if (!strcmp(path, "-")) {
674 if (tty_open(NULL, speed) < 0) { return(3); }
676 if ((sp = strrchr(path, '/')) != NULL) *sp++ = '\0';
678 if (tty_open(sp, speed) < 0) { return(3); }
681 /* Start the correct protocol. */
687 (*ht->activate)(tty_fd);
688 if ((opt_v == 1) || (opt_d == 1)) {
690 printf(_("%s started"), proto);
691 if (sp != NULL) printf(_(" on %s"), sp);
692 printf(_(" interface %s\n"), buff);
695 /* Configure keepalive and outfill. */
696 #ifdef SIOCSKEEPALIVE
697 if (opt_k && (ioctl(tty_fd, SIOCSKEEPALIVE, &opt_k) < 0))
698 fprintf(stderr, "slattach: ioctl(SIOCSKEEPALIVE): %s\n", strerror(errno));
701 if (opt_o && (ioctl(tty_fd, SIOCSOUTFILL, &opt_o) < 0))
702 fprintf(stderr, "slattach: ioctl(SIOCSOUTFILL): %s\n", strerror(errno));
705 (void) signal(SIGHUP, sig_catch);
706 (void) signal(SIGINT, sig_catch);
707 (void) signal(SIGQUIT, sig_catch);
708 (void) signal(SIGTERM, sig_catch);
710 /* Wait until we get killed if hanging on a terminal. */
713 if(opt_h == 1) { /* hangup on carrier loss */
716 ioctl(tty_fd, TIOCMGET, &n);
726 if(extcmd!=(char *)0) /* external command on exit */