1 Wed May 24 14:07:11 1995 Steve Chamberlain <sac@slash.cygnus.com>
3 * gencode.c (tab): Add bsrf and braf.
5 Mon Apr 24 15:09:49 1995 Jason Molenda (crash@cygnus.com)
7 * configure.in: use ../../bfd/hosts/std-host.h, not
8 ../bfd/hosts/std-host.h (which doesn't exist).
10 Mon Mar 27 10:32:34 1995 J.T. Conklin <jtc@rtl.cygnus.com>
12 * run.c: parse arguments with getopt().
14 Sun Feb 26 15:27:24 1995 Steve Chamberlain <sac@cygnus.com>
16 * configure.in: Use ../../bfd/hosts/std-host.h if specific
19 Mon Jan 23 16:10:58 1995 Torbjorn Granlund <tege@rtl.cygnus.com>
21 * interp.c (macw): Sign extend MACH at bit 10 for non-saturating case.
23 Sun Jan 22 13:55:36 1995 Torbjorn Granlund <tege@rtl.cygnus.com>
25 * gencode.c (op_tab): Make MAC.W call macw, not abort.
26 * interp.c (macw): New function.
29 Sat Jan 21 15:52:30 1995 Torbjorn Granlund <tege@rtl.cygnus.com>
31 * gencode.c (op_tab): New code for ADDV and SUBV.
32 Make MAC.L abort sicne it is not implemented.
34 * interp.c (dmul): Handle the signed case by adjusting after unsigned multiply.
35 Get rid of __GNUC__ conditional.
37 aThu Jan 19 05:50:50 1995 Torbjorn Granlund <tege@rtl.cygnus.com>
39 * gencode.c (op_tab): Also replace NEGC, and try again with SUBC.
40 Change ADDC for symmetry.
42 * gencode.c (op_tab): Replace code for ADDC and SUBC.
44 Mon Jan 9 15:43:53 1995 Stu Grossman (grossman@cygnus.com)
46 * interp.c: Remove def of INLINE. This comes from bfd.h. Also,
47 declare IOMEM before using it.
49 Wed Dec 28 21:25:31 1994 Steve Chamberlain (sac@jonny.cygnus.com)
51 * interp.c (BUSERROR): New macro.
52 ([r|w][bwl]at[little|big]) New functions.
53 (sim_resume): If GO32 check for interrupt every now
54 and again. Decrement PC if SIGBUS seen.
55 * run.c (main): Return result of simulated _exit.
57 Mon Dec 5 21:59:51 1994 Doug Evans <dje@canuck.cygnus.com>
59 * Makefile.in (gencode): Allow build in different directory.
61 Wed Nov 30 17:47:13 1994 Jim Wilson <wilson@chestnut.cygnus.com>
63 * Makefile.in (gencode): Change $< to gencode.c for portability.
65 Wed Nov 23 21:31:55 1994 Steve Chamberlain (sac@jonny.cygnus.com)
67 * interp.c ([wr][bwl]at): New functions.
68 (trap): Cope with both byte modes.
70 Thu Sep 8 17:35:07 1994 Steve Chamberlain (sac@jonny.cygnus.com)
72 * gencode.c (tab): Simulate T bit after a negc insn right.
73 * interp.c (RSBAT): Sign extend the arg.
74 (ACE_FAST): New macro.
75 (sim_resume): Remove obsolete test of sim_timeout.
77 Fri Aug 5 14:12:31 1994 Steve Chamberlain (sac@jonny.cygnus.com)
79 * interp.c (IOMEM): New function, simulates very basic I/O area of
81 (WBAT, RBAT) : Call I/O functions.
82 * gencode.c (tab): Special case trapa #3.
84 Mon Jun 27 18:04:54 1994 Steve Chamberlain (sac@cirdan.cygnus.com)
86 * run.c (main): Specify the file type again.
88 Thu May 26 19:04:37 1994 Steve Chamberlain (sac@thepub.cygnus.com)
90 * interp.c (trap): Fix irix incompatibility.
91 * run.c (main): open without specifying file type.
93 Wed May 18 14:18:53 1994 Doug Evans (dje@canuck.cygnus.com)
95 * interp.c (sim_*): Make result void where there isn't one.
97 (sim_info): Delete printf_fn arg, all callers changed.
98 Call printf_filtered instead.
99 (sim_close): New function.
100 (sim_load): New function.
101 (sim_create_inferior): Renamed from sim_set_args, all callers changed.
102 * run.c: #include <varargs.h>, "remote-sim.h".
103 (printf_filtered): New function.
105 Wed Apr 27 12:03:48 1994 Steve Chamberlain (sac@cygnus.com)
107 * gencode.c (table): Get direction of some opcodes right.
108 (trapa, rte): Implement fully.
109 * interp.c (trap): Make stat call more portable.
111 Fri Feb 11 21:59:38 1994 Steve Chamberlain (sac@sphagnum.cygnus.com)
113 * gencode.c (main, gendefines): New -d option prints table of defines.
114 * interp.c (trap): Add a load of system calls.
115 (sim_memory_size): Now default to 8Mbyte.
116 (PARANOID): Keep vector of registers with undefined contents.
118 Mon Nov 15 14:37:18 1993 Steve Chamberlain (sac@jonny.cygnus.com)
120 * gencode.c: mova uses aligned addresses
121 * interp.c (trap): Return results in r0.
123 Tue Oct 26 10:38:55 1993 Doug Evans (dje@canuck.cygnus.com)
125 * Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
126 * interp.c: #include "remote-sim.h".
127 (sim_resume): int result, new arg `siggnal'.
128 (sim_write): Use SIM_ADDR for type of arg `addr'.
129 (sim_read): Use SIM_ADDR for type of arg `addr'.
130 Use unsigned char * for `buffer'.
131 (sim_store_register): int result.
132 (sim_fetch_register): Ditto.
133 (sim_stop_reason): Renamed from sim_stop_signal. New arg `reason'.
134 (sim_set_pc): int result, use SIM_ADDR for type of arg `x'.
135 (sim_info): int result, new args `verbose', `printf_fn'.
136 (sim_kill): int result.
137 (sim_open): int result, new arg `name'.
138 * run.c: #include <stdio.h>
139 (main): Update call to sim_info.
141 Sat Oct 23 15:09:29 1993 Doug Evans (dje@canuck.cygnus.com)
143 * interp.c (sim_stop_signal): Result is now enum sim_stop.
145 Fri Oct 8 10:47:09 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
147 * gencode.c (table): Becomes unsigned.
148 * interp.c (trap): Get right breakpoint SIGnum. (sim_write,
149 sim_read): Return number of bytes copied. (sim_store_register):
150 Value passed by reference. (sim_kill, sim_open, sim_set_args): New functions.
152 Tue Sep 7 16:24:13 1993 Stan Shebs (shebs@rtl.cygnus.com)
154 * interp.c (sim_info): Fix small typo in printf string.
156 Thu Aug 5 11:37:48 1993 Stan Shebs (shebs@rtl.cygnus.com)
158 * interp.c (sim_resume): Set memory after pointers inited.
160 Mon Aug 2 14:13:22 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
162 * interp.c (get_now): Use time system call.
163 * Makefile.in: install correctly.
165 Tue Jul 6 10:30:46 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
167 * run.c (main), interp.c (sim_set_timeout): Remove timeout
170 Thu Jun 24 13:29:57 1993 david d `zoo' zuhn (zoo at rtl.cygnus.com)
172 * Makefile.in: don't run indent everytime; also add a space in the
175 Thu Jun 17 18:30:42 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
177 * gencode.c: Fix some opcodes.
178 * interp.c: Support for profiling and portability fixes.
179 * run.c (main): Get profiling args.
181 Wed May 5 13:17:22 1993 Steve Chamberlain (sac@cygnus.com)
183 * gencode.c (tab): Lint for sgi compiler
184 * interp.c: Lint for sgi compiler.
186 Mon May 3 15:25:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
188 * run.c (main): Support for resizing simulated RAM.
189 * Makefile.in: Support for broken makes.
190 * interp.c, gencode.c: Lint.
192 Mon Apr 26 18:01:10 1993 Steve Chamberlain (sac@thepub.cygnus.com)