1 2013-05-03 Hafiz Abid Qadeer <abidh@codesourcery.com>
4 2013-04-19 Nathan Froyd <froydnj@codesourcery.com>
5 * ppc-instructions (isel): New instruction.
7 2012-12-19 Joel Brobecker <brobecker@adacore.com>
9 * COPYING: Update to GPL version 3.
11 2012-06-15 Joel Brobecker <brobecker@adacore.com>
13 * configure: Regenerate.
15 2012-05-24 Pedro Alves <palves@redhat.com>
19 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
21 2012-03-14 Michael Haubenwallner <michael.haubenwallner@salomon.at>
23 * emul_unix.c (st_pad1, st_pad2, st_pad3): Undefine.
25 2012-01-02 Joel Brobecker <brobecker@adacore.com>
27 * dp-bit.c: Reformat copyright header.
29 2011-02-11 Ben Golding <ben_golding@yahoo.co.uk>
31 * events.c: add #include <stdlib.h> for free(). Fix PR build/13372.
33 2011-10-17 Mike Frysinger <vapier@gentoo.org>
35 * configure.ac: Change include to common/acinclude.m4.
37 2011-10-17 Mike Frysinger <vapier@gentoo.org>
39 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
40 call. Replace common.m4 include with SIM_AC_COMMON.
41 * configure: Regenerate.
43 2011-06-09 Joel Brobecker <brobecker@adacore.com>
45 * psim.c (psim_options): Fix length of comparison when checking
46 for --sysroot= option.
48 2011-06-08 Joel Brobecker <brobecker@adacore.com>
50 * psim.c (psim_options): Add option that cause the error
51 in invalid-option error messages. Print the usage when
52 detecting an invalid long-name option.
54 2011-06-08 Joel Brobecker <brobecker@adacore.com>
56 * psim.c (psim_options): Accept and ignore `--sysroot=...'.
58 2011-06-03 Joel Brobecker <brobecker@adacore.com> (obvious fix)
60 From Stephen Kitt <steve@sk2.org>
61 * vm.c (vm_synchronize_context): Spelling fix in function
64 2011-04-16 Mike Frysinger <vapier@gentoo.org>
66 * sim_calls.c (sim_complete_command): New stub function.
68 2011-02-14 Mike Frysinger <vapier@gentoo.org>
70 * cap.c (cap_remove): Change zfree to free.
71 * corefile.c (core_init): Likewise.
72 * device.c (detach_device_interrupt_edge): Likewise.
73 (clean_device_interrupt_edges): Likewise.
74 (device_instance_delete): Likewise.
75 (device_set_property): Likewise.
76 (clean_device_properties): Likewise.
77 (device_add_range_array_property): Likewise.
78 (device_add_reg_array_property): Likewise.
79 * emul_bugapi.c (emul_bugapi_do_read): Likewise.
80 (emul_bugapi_do_write)
81 * emul_netbsd.c (write_direntries): Likewise.
84 (do_getdirentries): Likewise.
85 * emul_unix.c (do_unix_read): Likewise.
86 (do_unix_write): Likewise.
87 * events.c (event_queue_init): Likewise.
88 (event_queue_deschedule): Likewise.
89 (event_queue_process): Likewise.
90 * hw_disk.c (open_disk_image): Likewise.
91 (hw_disk_instance_delete): Likewise.
92 * hw_eeprom.c (hw_eeprom_instance_delete): Likewise.
93 * hw_htab.c (htab_dma_binary): Likewise.
94 * hw_init.c (update_for_binary_section): Likewise.
95 * hw_memory.c (hw_memory_set_available): Likewise.
96 (hw_memory_init_address): Likewise.
97 (hw_memory_instance_release): Likewise.
98 * pk_disklabel.c (disklabel_delete): Likewise.
99 * table.c (table_push): Likewise.
100 * tree.c (parse_reg_property): Likewise.
101 (parse_ranges_property): Likewise.
102 (parse_string_property): Likewise.
103 * main.c (zfree): Delete.
104 * sim_calls.c (zfree): Likewise.
105 * sim_callbacks.h (zfree): Likewise.
107 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
109 * gdb-sim.c (sim_store_register): Update return value to
112 2011-01-05 Joel Brobecker <brobecker@adacore.com>
114 * psim.texinfo: Copyright year update.
116 2010-04-14 Mike Frysinger <vapier@gentoo.org>
118 * sim_calls.c (sim_write): Add const to buf arg.
120 2010-02-14 Andreas Schwab <schwab@linux-m68k.org>
122 * ppc-instructions: Fix missing assignment in last change.
124 2010-02-05 Andreas Schwab <schwab@linux-m68k.org>
126 * ppc-instructions: Fix aliasing bugs when calling
127 invalid_arithemetic_operation.
129 2009-11-13 Nathan Froyd <froydnj@codesourcery.com>
131 * configure.ac: If build != host, create a separate build-config.h
132 file desecribing the build machine.
133 * configure: Regenerate.
134 * lf.c: Include build-config.h instead of config.h.
139 * filter.c: Likewise.
142 2009-10-15 Joel Sherrill <joel.sherrill@oarcorp.com>
144 * std-config.h: Fix spelling error.
146 2009-09-22 Joel Sherrill <joel.sherrill@oarcorp.com>
148 * main.c: Fix spelling error.
150 2009-09-15 Andreas Tobler <andreast-list@fgznet.ch>
151 Doug Evans <dje@google.com>
153 * configure.ac (sim_hwflags): Use AC_DEFINE to define HAVE_UNION_SEMUN.
154 * configure: Regenerate.
155 * config.in: Regenerate.
156 * hw_sem.c: (HAVE_UNION_SEMUN): Renamed from HAS_UNION_SEMUN.
158 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
160 * config.in: Regenerate.
161 * configure: Likewise.
163 * configure: Regenerate.
165 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
167 * Makefile.in (datarootdir): New variable.
169 2009-01-12 Nathan Froyd <froydnj@codesourcery.com>
171 * ppc-instructions (sync): Add L field.
173 2008-12-15 Joel Sherrill <joel.sherrill@oarcorp.com>
175 * ppc-instructions, ppc-spr-table: Add ability
176 to read tbrl and tbru special registers.
178 2008-11-18 Joel Sherrill <joel.sherrill@oarcorp.com>
180 * configure: Regenerated.
181 * configure.ac: Add test for System V shared memory and semaphore.
182 * debug.c, debug.h: Add trace support for new devices.
183 * hw_sem.c, hw_shm.c: New files.
184 * Makefile.in: Add hw_sem.c and hw_shm.c.
186 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
188 * configure.ac: Add test for libz and zlib.h.
189 * Makefile.in (LIBS): Set from @LIBS@.
190 * configure: Regenerate.
193 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
194 Daniel Jacobowitz <dan@codesourcery.com>
195 Joseph Myers <joseph@codesourcery.com>
197 * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL.
198 * configure, config.in: Regenerated.
199 * Makefile.in (LIB_OBJ): Add version.o.
200 (version.c, version.o): New rules.
201 * psim.c (psim_usage): Add help parameter. Print the bug URL.
202 Exit with code 0 for help.
203 (psim_options): Update calls to psim_usage. Handle --help and
205 * psim.h (psim_usage): Update prototype.
206 * main.c (main): Update psim_usage call.
208 2008-03-14 Nick Hudson <nick.hudson@dsl.pipex.com
210 * configure.ac: Pass ../../intl to ZW_GNU_GETTEXT_SISTER_DIR.
211 * configure: Regenerate.
213 2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
215 * gdb-sim.c (regnum2spr): Rename to...
216 (sim_spr_register_name): ... this. Make global.
218 2007-09-04 Jerome Guitton <guitton@adacore.com>
220 * sim/ppc/emul_bugapi.c (emul_bugapi_create): quote the file
221 name property before parsing it.
223 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
225 * acconfig.h: Remove.
226 * config.in: Regenerate.
228 2006-11-22 Tom Marn <tom.marn@telargo.com>
230 Committed by Andrew Cagney.
231 * ppc-instructions: Implement optional PowerPC stfiwx instruction.
233 2006-07-12 Fred Fish <fnf@specifix.com>
235 * sim-endian.h (asm/byteorder.h): Don't include private kernel
238 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
240 * configure: Regenerated.
242 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
244 * Makefile.in: Replace INTLLIBS and INTLDEPS with LIBINTL
245 and LIBINTL_DEP everywhere.
246 (INTL_DIR, INTL_SRC): Remove.
247 (INTL_CFLAGS): Use INCINTL.
248 * configure.ac: Use ZW_GNU_GETTEXT_SISTER_DIR.
249 * configure: Regenerated.
251 2006-05-05 Andreas Schwab <schwab@suse.de>
253 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
254 * configure: Regenerate.
256 * Makefile.in (CFLAGS_FOR_BUILD): Define.
257 (BUILD_CFLAGS): Use it instead of hardcoding "-g -O".
258 (gentmap): Fix typo BUILD_FLAGS -> BUILD_CFLAGS.
260 2006-04-23 Andreas Schwab <schwab@suse.de>
262 * Makefile.in (tmp-ld-decode): Fix dependencies.
263 (tmp-ld-cache): Likewise.
264 (tmp-ld-insn): Likewise.
266 2006-02-01 Mark Mitchell <mark@codesourcery.com>
268 * emul_netbsd.c (emul_netbsd_create): Quote file-name property.
269 * emul_unix.c (emul_unix_create): Likewise.
270 * tree.c (libiberty.h): Include it.
271 (tree_quote_property): New function.
272 * tree.h (tree_quote_property): Declare.
274 2006-01-25 Mark Mitchell <mark@codesourcery.com>
276 * words.h (natural32): Define as "int".
278 2006-01-23 Mark Mitchell <mark@codesourcery.com>
280 * words.h (signed32): Define as "int".
281 (unsigned32): Define as "unsigned int".
283 2005-11-28 Mark Mitchell <mark@codesourcery.com>
285 * configure.ac (USE_WIN32API): Define it.
286 * configure.in: Regenerate.
287 * config.in: Likewise.
288 * emul_netbsd.c (write_timezone): Guard with HAVE_GETTIMEOFDAY.
289 * emul_unix.c (do_unix_mkdir): Handle Win32 1-argument mkdir.
291 2005-11-28 Mark Mitchell <mark@codesourcery.com>
293 * psim.c: Include gdb/signals.h.
295 * sim_calls.c (gdb/signals.h): Include it.
296 (sim_stop_reason): Use TARGET_SIGNAL_*.
297 * psim.c (cntrl_c_simulation): Use TARGET_SIGNAL_*.
299 2005-07-15 Ben Elliston <bje@au.ibm.com>
301 * hw_htab.c (bfd_get_section_lma): Remove macro; use BFD's.
303 2005-07-15 Ben Elliston <bje@au.ibm.com>
305 * hw_init.c: Comment out tokens after #endif directive.
306 * hw_register.c: Likewise.
307 * hw_trace.c: Likewise.
310 2005-04-20 Manoj Iyer <manjo@austin.ibm.com>
312 * psim.c: Added libiberty.h header file.
314 2005-04-18 Manoj Iyer <manjo@austin.ibm.com>
316 * configure.ac: Added check for long long.
317 * config.in: Regenerated.
318 * configure: Regenerated.
319 * words.h: Modified logic to check for HAVE_LONG_LONG instead of
320 __GNUC__, added config.h header file.
322 2005-03-25 Anthony Green <green@redhat.com>
324 * tree.c (parse_reg_property): Fix memset usage.
326 2005-03-23 Mark Kettenis <kettenis@gnu.org>
328 * configure: Regenerate.
330 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
332 * configure.ac: Delete AC_CONFIG_AUX_DIR.
333 * configure: Re-generate.
335 2005-01-07 Andrew Cagney <cagney@gnu.org>
337 * configure.ac: Rename configure.in, require autoconf 2.59.
338 * configure: Re-generate.
340 2005-01-03 Andreas Schwab <schwab@suse.de>
342 * Makefile.in (hw_com.o, hw_eeprom.o): Depend on
345 2004-11-16 Andreas Schwab <schwab@suse.de>
347 * Makefile.in (defines.h): Depend on tmp-defines.
348 (hw.c hw.h): Depend on tmp-hw.
349 (pk.h): Depend on tmp-pk.
351 2004-11-11 Andreas Schwab <schwab@suse.de>
353 * sim_calls.c: Include "libiberty.h".
355 2004-09-24 Ian Lance Taylor <ian@wasabisystems.com>
357 Committed by Andrew Cagney.
358 * configure.in: Check for sys/mount.h, sys/vfs.h, sys/statfs.h.
359 Check for struct statfs.
360 * emul_netbsd.c: If not HAVE_STRUCT_STATFS, #undef HAVE_FSTATFS.
361 * configure, config.in: Regenerate.
363 2004-08-05 Nathanael Nerode <neroden@gcc.gnu.org>
365 * Makefile.in (GDB_INCLUDES): Remove bogus reference to mmalloc.
367 2004-08-04 Andrew Cagney <cagney@gnu.org>
368 Jim Blandy <jimb@redhat.com>
370 * sim_callbacks.h (simulator): Declare.
371 * Makefile.in (gdb-sim.o): New rule.
372 (MAIN_SRC, GDB_OBJ): Add gdb-sim.o, gdb-sim.c.
374 (GDB_SIM_PPC_H): Define.
375 * gdb-sim.c: New file.
376 * sim_calls.c: Do not include "defs.h".
377 (simulator): Drop static.
378 (sim_store_register, sim_fetch_register): Delete.
380 2004-08-04 Andrew Cagney <cagney@gnu.org>
382 * Back out accidently committed change.
384 2004-08-04 Jim Blandy <jimb@redhat.com>
386 Use a fixed register numbering when communicating with the PowerPC
388 * sim_calls.c: #include "registers.h" and "gdb/sim-ppc.h"; do not
389 include GDB's "defs.h".
390 (gdb_register_name_table): New variable.
391 (gdb_register_name_table_size): New enum constant.
392 (gdb_register_name): New function.
393 (sim_fetch_register, sim_store_register): Use gdb_register_name,
394 instead of calling gdbarch_register_name.
395 * Makefile.in (GDB_SIM_PPC_H): New variable.
396 (DEFS_H): Delete variable.
397 (sim_calls.o): Update dependencies.
399 2004-07-26 Andrew Cagney <cagney@gnu.org>
401 Problem from Olaf Hering <olh@suse.de>.
402 * Makefile.in (install, installdirs): Add DESTDIR.
404 2004-07-10 Ben Elliston <bje@au.ibm.com>
406 * tree.c (parse_integer_property): Comment typo fix.
408 2004-07-06 Jim Blandy <jimb@redhat.com>
410 * Makefile.in: Update all dependency information.
411 (BASICS_H, CPU_H, IDECODE_H, PSIM_H, REGISTERS_H, DEVICE_TABLE_H)
412 (EMUL_GENERIC_H): Values updated.
413 (ACCONFIG_H, ALTIVEC_EXPRESSION_H, ALTIVEC_REGISTERS_H)
414 (ANSIDECL_H, BFD_H, BITS_H, CAP_H, COMMON_SIM_BASE_H)
415 (COMMON_SIM_BASICS_H, COMMON_SIM_FPU_H, COMMON_SIM_INLINE_H)
416 (COMMON_SIM_SIGNAL_H, CONFIG_H, COREFILE_H, COREFILE_N_H, DEBUG_H)
417 (DEFINES_H, DEFS_H, DEVICE_H, E500_EXPRESSION_H, E500_REGISTERS_H)
418 (EMUL_BUGAPI_H, EMUL_CHIRP_H, EMUL_NETBSD_H, EMUL_UNIX_H, EVENTS_H)
419 (FILTER_FILENAME_H, FILTER_H, GDB_CALLBACK_H, GDB_REMOTE_SIM_H)
420 (GEN_ICACHE_H, GEN_IDECODE_H, GEN_ITABLE_H, GEN_MODEL_H)
421 (GEN_SEMANTICS_H, GEN_SUPPORT_H, HW_CPU_H, HW_H, HW_PHB_H)
422 (ICACHE_H, IDECODE_BRANCH_H, IDECODE_EXPRESSION_H)
423 (IDECODE_FIELDS_H, IGEN_H, INLINE_H, INTERRUPTS_H, ITABLE_H)
424 (LD_CACHE_H, LD_DECODE_H, LD_INSN_H, LF_H, MISC_H, MODEL_H, MON_H)
425 (OPTIONS_H, OS_EMUL_H, PK_H, PPC_CONFIG_H, SEMANTICS_H)
426 (SIM_CALLBACKS_H, SIM_ENDIAN_H, SIM_ENDIAN_N_H, SIM_MAIN_H)
427 (SPREG_H, STD_CONFIG_H, SUPPORT_H, TABLE_H, TARG_VALS_H, TCONFIG_H)
428 (TREE_H, VM_H, VM_N_H, WORDS_H): New variables.
429 (callback.o, cap.o, corefile.o, debug.o, device.o, device_table.o)
430 (dgen.o, emul_bugapi.o, emul_chirp.o, emul_netbsd.o, emul_unix.o)
431 (events.o, filter.o, filter_filename.o, filter_host.o)
432 (gen-icache.o, gen-idecode.o, gen-itable.o, gen-model.o)
433 (gen-semantics.o, gen-support.o, hw_core.o, hw_cpu.o, hw_disk.o)
434 (hw_htab.o, hw_init.o, hw_phb.o, hw_register.o, icache.o)
435 (idecode.o, igen.o, interrupts.o, itable.o, ld-cache.o)
436 (ld-decode.o, ld-insn.o, lf.o, main.o, misc.o, model.o, mon.o)
437 (options.o, os_emul.o, pk_disklabel.o, psim.o, registers.o)
438 (semantics.o, sim-endian.o, sim-fpu.o, sim_calls.o, spreg.o)
439 (support.o, table.o, targ-map.o, tree.o, vm.o): Update dependencies.
441 2004-06-28 Jim Blandy <jimb@redhat.com>
443 * e500_registers.h (EVR): Cast the 32-bit value of the GPR to an
444 unsigned type before or-ing it with a 64-bit value.
446 2004-06-15 Alan Modra <amodra@bigpond.net.au>
448 * hw_htab.c (htab_sum_binary(bfd): Use bfd_get_section_size
449 instead of bfd_get_section_size_before_reloc.
450 (htab_dma_binary(bfd): Likewise.
451 * hw_init.c (update_for_binary_section(bfd): Likewise.
453 2004-05-10 Daniel Jacobowitz <dan@debian.org>
455 * configure.in (sim_fpu_cflags): Add -I../common.
456 * configure: Regenerated.
458 2004-01-27 Andrew Cagney <cagney@redhat.com>
460 * ppc-instructions: Update copyright.
461 (convert_to_integer): Add trailing ";" to label.
463 2003-10-16 Michael Snyder <msnyder@redhat.com>
465 * emul_netbsd.c: Only a comment may follow an #endif.
467 2003-10-15 Michael Snyder <msnyder@redhat.com>
469 * Makefile.in (sim_calls.o): No longer depends on gdb/tm.h.
471 2003-06-22 Andrew Cagney <cagney@redhat.com>
473 Written by matthew green <mrg@redhat.com>, with fixes from Aldy
474 Hernandez <aldyh@redhat.com>, Jim Wilson <wilson@redhat.com>, and
475 Nick Clifton <nickc@redhat.com>.
477 * ppc-instructions: Include altivec.igen and e500.igen.
478 (model_busy, model_data): Add vr_busy and vscr_busy.
479 (model_trace_release): Trace vr_busy and vscr_busy.
480 (model_new_cycle): Update vr_busy and vscr_busy.
481 (model_make_busy): Update vr_busy and vscr_busy.
482 * registers.c (register_description): Add Altivec and e500
484 * psim.c (psim_read_register, psim_read_register): Handle Altivec
486 * ppc-spr-table (SPEFSCR): Add VRSAVE and SPEFSCR registers.
487 * configure.in (sim_filter): When *altivec* add "av". When *spe*
489 (sim_float): When *altivec* define WITH_ALTIVEC. When *spe* add
491 * configure: Re-generate.
492 * e500.igen, altivec.igen: New files.
493 * e500_expression.h, altivec_expression.h: New files.
494 * idecode_expression.h: Update copyright. Include
495 "e500_expression.h" and "altivec_expression.h".
496 * e500_registers.h, altivec_registers.h: New files.
497 * registers.h: Update copyright. Include "e500_registers.h" and
498 "altivec_registers.h".
499 (registers): Add Altivec and e500 specific registers.
500 * Makefile.in (IDECODE_H): Add "idecode_e500.h" and
502 (REGISTERS_H): Add "e500_registers.h" and "altivec_registers.h".
503 (tmp-igen): Add dependencies on altivec.igen and e500.igen .
505 2003-06-22 Andrew Cagney <cagney@redhat.com>
507 Problems reported by Joshua LeVasseur.
508 * emul_chirp.c: Update copyright.
509 (chirp_emul_nextprop): Return the first property.
510 * hw_htab.c: Update copyright.
511 (htab_decode_hash_table): Fix check for htab size.
513 2003-06-21 Andrew Cagney <cagney@redhat.com>
515 * interrupts.c: Update copyright.
516 (external_interrupt): Fix test for already pending interrupt.
517 Problem found by Joshua LeVasseur.
519 * ppc-instructions: Add missing +8 line. Found by blofeldus at
522 2003-06-21 Andrew Cagney <cagney@redhat.com>
524 From Ian Lance Taylor <ian@airs.com>: * hw_nvram.c
525 (hw_nvram_init_address): Correct call to memset--swap second and
528 2003-06-21 Andrew Cagney <cagney@redhat.com>
530 * hw_com.c (hw_com_device_init_data): Check that the output, and
531 not input file opened. Pointed out by masahino tky3.3web.ne.jp.
533 2003-06-20 Andrew Cagney <cagney@redhat.com>
535 * sim_calls.c (sim_create_inferior): Assert that
536 psim_write_register succeeded.
537 (sim_fetch_register, sim_store_register): Make "regname" constant.
538 Delete Altivec hack. Return result from psim_read_register /
540 * psim.h (psim_read_register, psim_write_register): Change return
541 type to int. Update comments.
542 * psim.c: Update copyright.
543 (psim_stack): Assert that the psim_read_register worked.
544 (psim_read_register, psim_read_register): Return the register's
545 size. Allocate the cooked buffer dynamically.
546 * hw_register.c: Update copyright.
547 (do_register_init): Check that psim_write_register succeeded.
548 * hw_init.c: Update copyright.
549 (create_ppc_elf_stack_frame, create_ppc_aix_stack_frame): Assert
550 that the register transfer worked.
552 2003-06-19 Andrew Cagney <cagney@redhat.com>
554 * ld-insn.h: Update copyright.
555 (cache_fields): Define.
556 (insn_table_fields): Add insn_field_6 and insn_field_7.
557 (load_insn_table): Pass in the "cache_rules".
558 * ld-insn.c: Update copyright.
559 (load_insn_table): Add parameter "cache_rules". Handle "cache",
560 "computed" and "scratch" fields.
561 (main): Pass "cache_rules" to load_insn_table.
562 * ld-cache.h: Update copyright.
563 (append_cache_table): Declare.
564 * ld-cache.c: Update copyright.
565 (append_cache_table): New function.
566 (load_cache_table): Call.
567 * gen-model.c: Include "ld-cache.h".
568 * gen-itable.c: Include "ld-cache.h".
569 * igen.c: Move #include "ld-cache.h" to earlier. Update
571 (main): Permit a NULL "cache_rules". Pass address of
572 "cache_rules" to load_insn_table.
573 * Makefile.in (tmp-ld-insn): Add "ld-cache.o".
574 (tmp-igen): Do not include ppc-cache-rules.
575 (gen-itable.o, gen-model.o): Add "ld-cache.h".
576 * ppc-cache-rules: Delete file.
577 * ppc-instructions: Add cache rules.
579 2003-06-19 Andrew Cagney <cagney@redhat.com>
581 * Makefile.in (ICACHE_CFLAGS, SEMANTICS_CFLAGS): Delete.
582 (SIM_FPU_FLAGS): Define.
583 (icache.o): Delete explicit compile command.
584 (semantics.o, idecode.o): Delete explicit compile command.
585 (NOWARN_CFLAGS, STD_CFLAGS): Append SIM_FPU_CFLAGS.
586 * gen-support.c (gen_support_c): Generate #include of
587 "sim-inline.h" and "sim-fpu.h", but conditional on
589 * gen-idecode.c (gen_idecode_c): Ditto.
590 * igen.c (gen_icache_c, gen_semantics_c): Wrap #include of
591 "sim-inline.h" and "sim-fpu.h" in HAVE_COMMON_FPU conditional.
592 Move to before "support.h".
593 * Makefile.in, gen-support.c, gen-idecode.c, igen.c: Update
596 2003-05-16 Ian Lance Taylor <ian@airs.com>
598 * Makefile.in (various): Use $(SHELL) whenever we invoke
601 2003-02-27 Andrew Cagney <cagney@redhat.com>
603 * sim_calls.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
605 2002-09-27 Andrew Cagney <ac131313@redhat.com>
607 * hw_disk.c (hw_disk_init_address): Set device type to "block",
610 2002-06-22 Andrew Cagney <ac131313@redhat.com>
612 * Makefile.in (INTL_SRC): Define.
613 (INTL_CFLAGS): Define.
615 (STD_CFLAGS): Add INTL_CFLAGS.
617 2002-06-17 Elena Zannoni <ezannoni@redhat.com>
619 * psim.c (psim_options): Don't choke when gdb invokes us with
620 the --architecture option, just ignore it.
622 2002-06-16 Andrew Cagney <ac131313@redhat.com>
624 * configure: Regenerated to track ../common/aclocal.m4 changes.
626 2002-06-08 Andrew Cagney <cagney@redhat.com>
628 * main.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
629 * sim_calls.c: Ditto.
631 2002-05-30 DJ Delorie <dj@redhat.com>
633 * lf.c (lf_print__gnu_copyleft): Convert multiline strings to
635 * gen-idecode.c (print_run_until_stop_body): Likewise.
636 * gen-model.c (gen_model_c): Likewise.
638 2002-04-15 Elena Zannoni <ezannoni@redhat.com>
640 * sim_calls.c (sim_fetch_register, sim_store_register): Return -1 for
641 AltiVec registers as a temporary stopgap.
643 2002-03-24 David O'Brien <obrien@FreeBSD.org>
645 * ppc/hw_disk.c: Export a disk device property.
647 2002-03-23 Andrew Cagney <ac131313@redhat.com>
649 From 2001-12-09 Julien Ducourthial <jducourt@noos.fr>:
650 * ppc-instructions (lswx): Do the register control with the
651 register count. Initialize the right register in the loop.
652 (mtfsfi) : Correct prefix for the instruction.
654 2002-02-24 Andrew Cagney <ac131313@redhat.com>
657 * std-config.h: Fix grammar and typos. Update copyright.
660 2002-01-12 matthew green <mrg@redhat.com>
662 * Makefile.in (tmp-igen): Pass -I $(srcdir) to igen.
663 * igen.c (main): Change -I to add include paths for :include:
665 Implement -G as per sim/igen, with just gen-icache=N support.
666 Call load_insn_table() with the built include path.
668 * ld-insn.c (parse_include_entry): New. Load an :include: file.
669 (load_insn_table): New `includes' argument. Look for :include:
670 entries and call parse_include_entry() for them.
671 (main): Adjust load_insn_table() call.
672 * ld-insn.h (model_include_fields): New enum.
673 (load_insn_table): Update prototype.
674 * table.c (struct _open_table, struct _table): Rework
675 structures to handle included files.
676 (table_push): Move the guts of table_open() here.
678 * table.c (struct _open table, struct table): Make table object an
679 indirect ptr to the current table file.
680 (current_line, new_table_entry, next_line): Make file arg type
682 (table_open): Use table_push.
683 (table_entry_read): Point variable file at current table, at eof, pop
686 * misc.h (NZALLOC): New macro. From sim/igen.
688 * table.h, table.c (table_push): New function.
690 2002-01-04 matthew green <mrg@redhat.com>
692 * bits.c (LSMASKED64): New inline function.
693 (LSEXTRACTED64): Likewise.
694 * bits.h (_LSB_POS, _LSMASKn, LSMASK64): New macros from
695 sim/common/sim-bits.h
696 (LSMASKED64, LSEXTRACTED64): New functions definitions.
697 * Makefile.in (sim-bits.o): Remove target.
699 * main.c (zalloc): Fix typo in error message.
701 2001-12-16 Andrew Cagney <ac131313@redhat.com>
703 * configure.in (sim_fpu): Don't add sim-bits.o.
704 * configure: Re-generate.
706 2001-12-15 matthew green <mrg@redhat.com>
708 * main.c: Include "defs.h", "bfd.h", "callback.h" and "remote-sim.h".
709 (sim_io_error): New function.
710 * sim_calls.c: (sim_io_error): New function.
712 2001-12-14 matthew green <mrg@redhat.com>
714 * Makefile.in (LIB_OBJ): Add @sim_fpu@.
715 (ICACHE_CFLAGS, SEMANTICS_CFLAGS): New variables.
716 (icache.o, semantics.o): Add new ICACHE_FLAGS & SEMANTICS_FLAGS.
717 (sim-fpu.o, sim-bits.o, tconfig.h): New targets.
718 * configure.in: Rename INLINE_LOCALS to PSIM_INLINE_LOCALS. Add a
719 check for sim/common/sim-fpu.c. Output sim_fpu and sim_fpu_cflags.
720 * configure: Regenerate.
721 * device.h (device_find_integer_array_property): Match function definition.
722 * gen-icache.c (print_icache_internal_function_declaration): Rename
723 INLINE_ICACHE to PSIM_INLINE_ICACHE.
724 * gen-idecode.c (print_idecode_run_function_header): Rename INLINE_IDECODE
725 to PSIM_INLINE_IDECODE.
726 * gen-semantics.c (print_semantic_function_header): Rename
727 EXTERN_SEMANTICS to PSIM_EXTERN_SEMANTICS.
728 * gen-support.c (print_support_function_name): Rename INLINE_SUPPORT to
730 * igen.c (print_function_name): Also escape `(' and `)'.
731 (gen_semantics_h): Rename EXTERN_SEMANTICS to PSIM_EXTERN_SEMANTICS.
732 (gen_semantics_c): Likewise. Also output includes for "sim-fpu.h"
733 * inline.h (INLINE_SIM_ENDIAN): Renamed INLINE_PSIM_ENDIAN.
734 (EXTERN_SIM_ENDIAN): Renamed EXTERN_PSIM_ENDIAN.
735 (STATIC_INLINE_SIM_ENDIAN): Renamed STATIC_INLINE_PSIM_ENDIAN.
736 (INLINE_LOCALS): Renamed PSIM_INLINE_LOCALS.
737 (EXTERN_SUPPORT): Renamed PSIM_EXTERN_SUPPORT.
738 (INLINE_SUPPORT): Renamed PSIM_INLINE_SUPPORT.
739 (EXTERN_SEMANTICS): Renamed PSIM_EXTERN_SEMANTICS.
740 (INLINE_SEMANTICS): Renamed PSIM_INLINE_SEMANTICS.
741 (EXTERN_IDECODE): Renamed PSIM_EXTERN_IDECODE.
742 (INLINE_IDECODE): Renamed PSIM_INLINE_IDECODE.
743 (EXTERN_ICACHE): Renamed PSIM_EXTERN_ICACHE.
744 (INLINE_ICACHE): Renamed PSIM_INLINE_ICACHE.
745 * options.c (options_inline): Fix names.
746 * sim-endian-n.h: Change INLINE_SIM_ENDIAN to INLINE_PSIM_ENDIAN.
747 * sim-endian.h: Likewise.
748 * sim-main.h: New file.
749 * std-config.h: Rename INLINE_LOCALS to PSIM_INLINE_LOCALS.
751 2001-12-01 Andrew Cagney <ac131313@redhat.com>
754 * ppc-spr-table: Add SDA and PIR.
756 2001-10-29 Andrew Cagney <ac131313@redhat.com>
758 * tree.c (parse_size): Assert #size-cells > 0.
759 (parse_address): Ditto for #address-cells.
760 (parse_reg_property): Only parse the size when #size-cells is
763 2001-10-25 Andrew Cagney <ac131313@redhat.com>
765 * emul_generic.c (OEA_MEMORY_SIZE): Increase to 4mb.
766 * hw_htab.c (htab_map_binary): Don't try to map the text section
768 * emul_chirp.c (map_over_chirp_note): Default load-base to -1 not
770 (emul_chirp_create): Map in the interrupt table.
772 2001-07-16 Daniel Jacobowitz <drow@mvista.com>
774 * Makefile.in: Add dependencies on $(CPU_H).
776 Wed Mar 7 10:45:12 HST 2001 Glen Nakamura <gen@lava.net>
778 * hw_init.c (dma_file): Fixed problem with loading last 1KB of
781 2001-03-04 Andrew Cagney <ac131313@redhat.com>
783 * emul_netbsd.c [WITH_NetBSD_HOST]: Include <sys/mount.h> and
785 (do_stat): Only do SYS test when SYS_stat defined.
786 (do_sigprocmask): Ditto for SYS_sigprocmask.
787 (do_fstat): Ditto for SYS_fstat.
788 (do_getdirentries): Ditto for SYS_getdirentries.
789 (do_lstat): Ditto for SYS_lstat.
791 2001-01-15 Geoffrey Keating <geoffk@redhat.com>
793 * emul_netbsd.c (do_open): Translate the flag parameter to the
794 open syscall to the numbers supported by the host.
796 2000-12-12 Geoffrey Keating <geoffk@redhat.com>
798 * sim-endian.h: Don't have parameters on macro definitions which
799 are simply renaming functions, to permit use of XCONCAT2 in both
800 the macro name and the arguments in a use of such a definition.
802 2000-11-15 Jim Blandy <jimb@redhat.com>
804 * sim_calls.c: Doc fix.
805 (sim_fetch_register, sim_store_register): Call
806 gdbarch_register_name directly, instead of going through
809 2000-10-24 Geoff Keating <geoffk@cygnus.com>
811 * ppc-instructions (lfsux): Correct XO field of lfsux instruction.
813 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
815 * configure: Regenerated to track ../common/aclocal.m4 changes.
817 Fri Apr 28 15:59:27 2000 Andrew Cagney <cagney@b1.cygnus.com>
819 * events.c (event_queue_process): Call update_time_from_event
820 every time an event is removed from the queue.
821 (update_time_from_event): Delete assertion that a negative
822 time_from_event implies an empty event queue.
824 Fri Apr 28 15:53:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
826 * interrupts.c (deliver_hardware_interrupt): Print time trace in
828 * events.c (event_queue_process): Cleanup trace message.
829 (update_time_from_event): Trace full event queue.
831 2000-03-25 Geoff Keating <geoffk@cygnus.com>
833 * ppc-instructions (Disabled_Exponent_Underflow): Increment
834 the exponent when denormalizing.
836 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
838 * configure: Regenerated to track ../common/aclocal.m4 changes.
840 1999-05-08 Felix Lee <flee@cygnus.com>
842 * configure.in: Use AC_EXEEXT instead of AM_EXEEXT.
843 * configure: Regenerated to track ../common/aclocal.m4 changes.
845 1999-04-02 Keith Seitz <keiths@cygnus.com>
847 * sim_calls.c (POLL_QUIT_INTERVAL): Define. Used to tweak
848 the frequency at which the poll_quit callback is called.
849 (poll_quit_count): New global.
850 (sim_io_poll_quit): Only call the poll_quit callback
851 after the specified POLL_QUIT_INTERVAL.
853 1999-02-22 Jim Lemke <jlemke@cygnus.com>
855 * dc-complex: Force expansion on all bits of field BO.
856 Previously, the least-significant (prediction) bit was ignored.
857 * ppc-instructions (conditional branches): Implement mpc860c0 option.
858 * igen.c (gen_semantics_[ch]): Setup for mpc860c0 option.
859 * psim.c (is_num, psim_options): Added parsing for mpc860c0 option.
860 * interrupts.h: Added "mpc860c0_instruction_program_interrupt".
861 * interrupts.c (program_interrupt): Added handling for above interrupt.
863 1999-02-01 Jim Blandy <jimb@zwingli.cygnus.com>
865 Make the simulator compatible with the MPC750. It would be nicer
866 to make this a real multi-sim, but that's more work than we have
868 * emul_generic.c (emul_add_tree_options): Only require strict
869 alignment if it was explicitly requested at configuration time.
870 Don't make it the default for little-endian machines.
871 * ppc-spr-table (UMMCR0, UMMCR1, UPMC1, UPMC2, USIA, UPMC3, UPMC4,
872 MMCR0, PMC1, PMC2, SIA, MMCR1, PMC3, PMC4, L2CR, ICTC, THRM1,
873 THRM2, THRM3): Plop in the MPC750 SPR registers.
874 (DABR): This is weird. This was HID5, but the PPC spec says this
875 should be DABR; why did some random processor use it for something
876 else? The HID5 entry dates back to the original checkin of the
877 simulator code in 1995, so remove it.
878 * sim_calls.c (register_names): Delete this; since the user can
879 now change GDB's list of register names dynamically, we can't
880 pretend there's a static mapping here.
881 (sim_fetch_register, sim_store_register): Call GDB's REGISTER_NAME
882 function to get the register name. That ought to be accurate.
883 However, we're changing a compile-time dependency (using the
884 REGISTER_NAMES macro) into a link- and run-time dependency
885 (calling REGISTER_NAME, which happens to be a function call on the
888 1999-01-22 Jim Lemke <jlemke@cygnus.com>
890 * igen.c(gen_semantics_[ch]): setup/use of new option
892 interrupts.[ch](mpc860c0_instruction_program_interrupt): added.
893 ppc-instructions(the four branch insn groups): detect problematic br's.
894 psim.c(is_num - added, psim_options): Parse and init new option.
895 These changes are currently under #ifdef WITH_OPTION_MPC860C0.
897 1998-12-01 Ken Raeburn <raeburn@cygnus.com>
899 * hw_nvram.c (hw_nvram_bcd): Force value to fit in 0..99.
901 Fri Nov 20 12:17:28 1998 Andrew Cagney <cagney@b1.cygnus.com>
903 * main.c (sim_io_poll_quit): Stub function.
905 * events.c (SIM_EVENTS_POLL_RATE): Define.
906 (sim_events_poll): Copy function from common/sim-events.c.
907 (event_queue_init): Copy scheduling of sim_events_poll from same.
909 * sim_callbacks.h, sim_calls.c (sim_io_poll_quit): New function,
910 poll the external environment.
912 1998-11-19 Michael Meissner <meissner@cygnus.com>
914 * ppc-instructions (is_{NaN,inf}): Use unsigned64 to get the
915 fractional type, so that quiet NaN's aren't treated like
918 Mon Sep 28 09:42:45 1998 Drew Moseley <dmoseley@cygnus.com>
920 * table.c (table_open): For cygwin hosts, we need to use the
921 return value from the read routine as the number of bytes to
922 process. This apparently is due to text-mode vs binary-mode. If
923 the mounts are done text-mode, then the size returnedby fstat()
924 may be different than the number of bytes "read" in text mode.
926 Sun Oct 4 00:50:47 1998 Felix Lee <flee@cygnus.com>
928 * emul_netbsd.c (do_open): fix order-of-evaluation problem.
933 1998-09-03 Michael Meissner <meissner@cygnus.com>
935 * emul_{netbsd,unix}.c: Update copyright year.
937 Mon Jun 29 10:57:36 1998 Michael Snyder <msnyder@cleaver.cygnus.com>
939 * sim_calls.c (sim_fetch_register, sim_store_register):
940 return zero when nothing to do.
942 1998-06-26 Michael Meissner <meissner@cygnus.com>
944 * configure.in (AC_CHECK_HEADERS): Don't check for sys/mount.h.
945 * configure: Regenerate.
946 * emul_{netbsd,unix}.c (toplevel): No longer try to include
947 sys/mount.h. It conflicts on Linux when gnu libc2 is used.
949 Tue May 12 12:10:33 PDT 1998 James Ingham <jingham@leda.cygnus.com>
951 * Makefile.in: The run target depended on a target psim$(EXEEXT),
952 but there was no such target, only plain psim. So I changed the
953 run target to depend on psim.
955 Sat May 2 01:10:12 1998 Stu Grossman <grossman@babylon-5.cygnus.com>
957 * aclocal.m4: Remove defs of AM_EXEEXT and AM_CYGWIN32. These are
958 now defined in ../common/aclocal.m4, and the double definition causes
959 problems with AC_SUBST of EXEEXT.
960 * configure: Regenerate.
962 Wed Apr 29 15:44:52 1998 Geoffrey Noer <noer@cygnus.com>
964 * aclocal.m4: new file for AM_EXEEXT macro
965 * configure.in: call AM_EXEEXT
966 * configure: regenerate with autoconf 2.12.1.
967 * Makefile.in: add EXEEXT support
969 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
971 * configure: Regenerated to track ../common/aclocal.m4 changes.
974 Sun Apr 26 15:19:51 1998 Tom Tromey <tromey@cygnus.com>
976 * acconfig.h: New file.
977 * configure.in: Reverted change of Apr 24; use sinclude again.
978 Don't call AC_C_CROSS.
980 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
982 * configure: Regenerated to track ../common/aclocal.m4 changes.
985 Fri Apr 24 11:18:46 1998 Tom Tromey <tromey@cygnus.com>
987 * Makefile.in (top_builddir): New macro.
988 (INTLLIBS): New macro.
989 (INTLDEPS): Likewise.
990 (psim): Depend on INTLDEPS; link against INTLLIBS.
991 * configure.in: Call CY_GNU_GETTEXT.
993 Wed Apr 22 14:28:48 1998 Michael Meissner <meissner@cygnus.com>
995 * configure: Regenerate with autoconf 2.12.1.
997 Fri Mar 13 09:25:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
999 * psim.c (psim_read_register, psim_write_register): Handle updates
1002 * registers.c (register_description): Reconize "FPSCR".
1004 * emul_netbsd.c (emul_netbsd_create): When FP available, enable
1005 MSR FP exception mode. Do not enable FPSCR bits.
1006 * emul_unix.c (emul_unix_create): Ditto.
1008 Tue Feb 17 12:48:58 1998 Andrew Cagney <cagney@b1.cygnus.com>
1010 * sim_calls.c (sim_store_register, sim_fetch_register): Pass in
1011 length parameter. Return -1.
1013 Mon Feb 9 14:13:14 1998 Andrew Cagney <cagney@b1.cygnus.com>
1015 * ppc-instructions (fdiv, fdivs): Check for divide by zero.
1016 (is_invalid_zero_divide, invalid_zero_divide_operation): New
1019 Wed Dec 10 17:38:28 1997 Andrew Cagney <cagney@b1.cygnus.com>
1021 * sim_calls.c (sim_load): Do not parse PROG using buildargv, use
1024 1997-11-05 Felix Lee <flee@cygnus.com>
1026 * emul_chirp.c: #ifdef HAVE_UNISTD_H
1028 Wed Oct 15 08:50:54 1997 Andrew Cagney <cagney@b1.cygnus.com>
1030 * corefile.c (core_attach): Pad out allocated memory regions so
1031 that they are always correctly aligned.
1032 (struct _core_mapping, core_map_attach, core_init,
1033 new_core_mapping): Change free_buffer to type void*.
1035 Mon Oct 6 18:09:26 1997 Michael Meissner <meissner@cygnus.com>
1037 * sim_calls.c (zfree): Call free correctly.
1039 Mon Sep 29 10:05:01 1997 Andrew Cagney <cagney@b1.cygnus.com>
1041 * sim_calls.c (zfree): Use free, not mfree.
1042 (sim_io_flush_stdoutput): Replace gdb_flush with callback ->
1045 Fri Sep 26 09:50:29 1997 Andrew Cagney <cagney@b1.cygnus.com>
1047 * ppc-instructions (sraw, slw, srw): From Charles Lefurgy, Fix
1048 mask extracting shift amount. Correctly condition for setting XER
1050 (ldhau): From Johannes Reisinger, update rA after load.
1052 Tue Sep 9 22:13:23 1997 Felix Lee <flee@cygnus.com>
1054 * basics.h (CONCAT*): token-pasting macros, if ALMOST_STDC,
1056 * words.h: __int64 instead of long long for MSVC.
1058 Wed Aug 27 10:24:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
1060 * sim_calls.c (sim_create_inferior): Check the simulator was
1061 initialized before creating inferior.
1063 * idecode_expression.h (ALU_END): From Charles Lefurgy - Extract
1064 sign bit using 64 bit and not a 32 bit mask.
1066 Wed Aug 27 10:15:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
1068 * sim_calls.c (sim_load): From Ian Lance Taylor - free argv after
1069 it has been used, not before.
1071 Tue Aug 26 10:41:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
1073 * sim_calls.c (sim_kill): Delete.
1074 (sim_create_inferior): Add ABFD argument.
1075 (entry_point): Delete variable.
1076 (sim_load): Move setting of PC from here.
1077 (sim_create_inferior): To here.
1079 Mon Aug 25 16:17:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
1081 * sim_calls.c (sim_open): Add ABFD argument.
1083 Thu Jul 3 10:18:06 1997 Andrew Cagney <cagney@b1.cygnus.com>
1085 * ppc-instructions (PPC_INSN_INT): From Michael Thies - Monitoring
1086 CR register updates dependant on RC value had logic backwards.
1088 * ppc-instructions (Load String Word Immediate): From Brad Parker
1089 - sense of wrap test in check for overwriting RA wrong.
1090 (Load String Word Indexed): Ditto.
1092 * configure.in: From Erik Landry - set sim_default_model not
1093 sim_model for sim-default-model option.
1094 * configure: Regenerate.
1096 * interrupts.c (check_masked_interrupts): Schedule a hardware
1097 interrupt delivery when FP interrupts get enabled.
1098 (program_interrupt): Generate FP exceptions instead of aborting.
1099 (deliver_hardware_interrupt): Deliver a FP exception if so
1102 * registers.h: Add definition of fpscr_vx_bits.
1104 * idecode_expression.h (FPSCR_END): Always update FEX and VX bits
1106 (FPSCR_END): Explicitly check for possible floating point
1107 exception conditions.
1108 (FPSCR_BEGIN): Simplify.
1110 * ppc-instructions (Move From FPSCR): Enable.
1111 (Move To FPSCR Bit 1): Ditto.
1112 (Move To FPSCR Bit 0): Ditto.
1113 (Move To FPSCR Field Immediate): Ditto.
1114 (Move to Condition Register from FPSCR): Simplify.
1115 (invalid_arithemetic_operation): Generate a QNaN when invalid
1116 operation exception disabled.
1118 Tue May 20 10:22:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
1120 * sim_calls.c (sim_open): Add callback argument.
1121 (sim_set_callbacks): Delete.
1123 Tue Apr 22 22:36:57 1997 Mike Meissner <meissner@cygnus.com>
1125 * sim_callbacks.h (error): Make declaration match gdb's.
1126 * main.c (error): Ditto.
1128 Fri Apr 18 17:03:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
1130 * sim_calls.c (sim_stop_reason): Simplify. Was running implies
1131 stopped/SIGINT. Exit implies a status code.
1133 * psim.c (cntrl_c_simulation): From main.c. Event function that
1134 halts the simulator.
1135 (psim_stop): New. Asynchronously schedule a stop simulator event.
1136 (psim_run_until_stop): Delete. Made redundant by psim_stop.
1138 * main.c (cntrl_c): Update.
1139 (cntrl_c_simulation): Moved to psim.c.
1141 * sim_calls.c (sim_stop): New function. Use psim_stop which
1142 schedules a stop event.
1143 (sim_resume): Drop SIGINT handler, now in gdb/main.c.
1144 (sim_resume): Use psim_run as stop variable no longer needed.
1146 Fri Apr 18 17:03:08 1997 Andrew Cagney <cagney@b1.cygnus.com>
1148 * psim.c (psim_options): Handle -E option correctly.
1149 (psim_usage): Document.
1151 Thu Apr 17 03:28:03 1997 Doug Evans <dje@canuck.cygnus.com>
1153 * psim.c (psim_options): Ignore -E option (sets endianness).
1154 * sim_calls.c: #include bfd.h.
1155 (entry_point): New static local.
1156 (sim_load): Return SIM_RC. New arg abfd. Set start address from bfd.
1157 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
1159 Tue Apr 15 14:57:18 1997 Ian Lance Taylor <ian@cygnus.com>
1161 * Makefile.in (INSTALL): Set to @INSTALL@.
1162 (INSTALL_XFORM, INSTALL_XFORM1): Remove.
1163 (install): Depend upon installdirs. Use $(program_transform_name)
1164 directly, rather than using $(INSTALL_XFORM).
1165 (installdirs): New target.
1167 Fri Apr 4 17:54:36 1997 Jim Wilson <wilson@cygnus.com>
1169 * Makefile.in (tmp-hw, tmp-pk): Use for loop to eliminate duplicates
1170 rather than the non-portable cat -n.
1172 Mon Apr 14 16:29:51 1997 Ian Lance Taylor <ian@cygnus.com>
1174 * Makefile.in (INSTALL): Change install.sh to install-sh.
1176 Tue Apr 1 18:15:14 1997 Jim Wilson <wilson@cygnus.com>
1178 * ppc-instructions: Change milhwu to mulhwu.
1180 Wed Apr 2 15:38:08 1997 Doug Evans <dje@canuck.cygnus.com>
1182 * sim_calls.c (sim_open): New arg `kind'.
1184 Wed Apr 2 14:51:17 1997 Ian Lance Taylor <ian@cygnus.com>
1186 * COPYING: Update FSF address.
1188 Tue Mar 25 16:17:59 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1190 * main.c (sim_io_read_stdin): Only compile unbuffered IO code if
1191 all the required features are supported by the host OS.
1193 Tue Mar 25 12:13:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1195 * emul_bugapi.c (emul_bugapi_create): Guard against NULL images.
1197 * configure.in (enable-sim-endain): Correct typo in usage (from
1198 Erik Landry <landry@ENGR.ORST.EDU>).
1199 * configure: Re-generate.
1201 Fri Mar 14 18:23:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
1203 * Makefile.in (targ-vals.def): Re-do rule so that it works with
1204 FreeBSD's make. Didn't like $<.
1206 Thu Mar 13 12:55:48 1997 Doug Evans <dje@canuck.cygnus.com>
1208 * sim_calls.c (sim_open): New SIM_DESC result. Argument is now
1210 (other sim_*): New SIM_DESC argument.
1212 Thu Feb 13 10:35:14 1997 Andrew Cagney <cagney@phydeaux.cygnus.com>
1214 * ppc-opcode-simple-array, ppc-opcode-simple-goto,
1215 ppc-opcode-simple-switch, ppc-opcode-complex-array,
1216 ppc-opcode-complex-goto, ppc-opcode-complex-switch,
1217 ppc-opcode-jump, ppc-opcode-goto, ppc-opcode-flat: Delete,
1218 superseeded by --sim-decode-mechanism option.
1220 * ppc-opcode-simple, dc-simple: Rename to be 8.3
1221 * ppc-opcode-complex, dc-complex: Ditto.
1222 * ppc-opcode-stupid, dc-stupid: Ditto.
1223 * ppc-opcode-test-1, dc-test.01: Ditto.
1224 * ppc-opcode-test-2, dc-test.02: Ditto.
1226 * configure.in (--enable-sim-opcode): Change prefix to dc- instead
1229 Wed Feb 12 19:33:45 1997 Andrew Cagney <cagney@phydeaux.cygnus.com>
1231 * Many of the ppc-opcode-* files are identical baring the type of
1232 lookup table. Instead of having multiple tables, igen can do this
1233 via an additional option.
1235 * ld-decode.h, ld-decode.c (force_decode_gen_type): New function,
1236 allow the type of generated table specified in the decode file to
1239 * ld-decode.c (load_decode_table): Allow the table type to be
1242 * igen.c (main): Add -T <mechanism> option so that an overriding
1243 instruction decode mechanism can be specified.
1245 * configure.in: New option --sim-decode-mechanism to control
1246 igen's new -T <mechanism> flag.
1247 * Makefile.in (IGEN_FLAGS): Add IGEN_IDECODE_MECHANISM set by the
1249 * configure: Regenerate.
1251 Tue Feb 11 13:49:10 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1253 * events.c (event_queue_create): Don't use NULL to initialize an
1255 (even_queue_{init,schedule_after_signal,tick}): Conditionalize use
1256 of sigprocmask to appropriate autoconf test.
1258 * main.c ({cntrl_c,main}): Use RETSIGTYPE for signal return type,
1260 * sim_calls.c (sim_{ctrl_c,resume}): Ditto.
1262 * Makefile.in (callback.o): Define HAVE_CONFIG_H, so callback.c
1263 includes our config.h.
1265 Tue Feb 4 13:42:59 1997 Doug Evans <dje@canuck.cygnus.com>
1267 * configure.in: Fix typo in test for callback.c.
1268 * configure: Regenerated.
1270 Fri Feb 7 10:04:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1272 * emul_chirp.c (emul_chirp_create): Handle a virtbase of -1 being
1273 found in the device tree.
1275 Wed Feb 5 10:56:27 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1277 * Property create/initialization still wasn't correctly ordered.
1278 Should be delaying everything related to ihandle creation until
1279 after the rest of the tree has been established.
1281 * device.c (device_find_ihandle_runtime_property): Update.
1282 (device_add_ihandle_runtime_property): Update.
1284 * tree.c (parse_ihandle_property): Delay lookup of the device to
1285 be opened until the ihandle initialization phase.
1286 * tree.c (print_properties): Update.
1288 Wed Feb 5 10:56:27 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1290 * gen-icache.c (print_icache_extraction): Add a reason parameter.
1291 Augment each extracted field with a comment citing the codes
1292 origin. Should simplify tracking down incorrect cache
1295 Tue Feb 4 17:44:51 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1297 * gen-icache.c: Generalize code handling XXX_is_NNN so that it
1298 works for normal and boolean table entries.
1300 * psim.c (psim_write_memory): last_cpu == -1 or nr_cpus is now
1301 valid. Handle this just like *_{read,write}_register now handles
1304 Mon Feb 3 17:18:16 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1306 * events.c (insert_event_entry): Correct loop termination
1309 Fri Jan 31 16:20:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1311 * psim.c (psim_options): Add new option -c for max-iterations or
1313 (psim_usage): Document.
1314 (psim_max_iterations_exceeded): New function, abort simulation if
1315 max iterations exceeded.
1317 * gen-idecode.c: Re-work the table lookup code so that it assumes
1318 that the entry is a leaf by default. Simplify the boolean table
1319 entry code so that it involves a mask + test instead of shift +
1320 shift + mask + test.
1322 * gen-idecode.c: Correct generated igen body so that it no drops
1323 or doubles clock interrupts.
1326 Thu Jan 30 11:23:20 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1328 * Makefile.in (BUILT_SRC_WO_CONFIG): Change targ-vals.* to
1331 * configure.in (sim_callback, sim_targ_vals): Set sim_targ_valls
1332 if common callback is present.
1334 Wed Jan 29 12:32:41 1997 Michael Meissner <meissner@tiktok.cygnus.com>
1336 * configure.in (sim_callback): If the gdb is post 4.16, configure
1337 callback support from the common directory.
1338 * configure: Regenerate.
1340 * Makefile.in (BUILT_SRC_WO_CONFIG): Add targ-vals.{h,def} and
1342 (GDB_OBJ): Add callback support configured in.
1343 (gentmap,targ-vals.def): Build from common directory.
1344 (targ-vals.h,targ-map.c): Build by running gentmap.
1345 (callback.o): Build from source in common directory.
1346 (targ-map.o): Add dependency.
1347 (clean): Remove gentmap.
1349 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1351 * igen wasn't aborting if the opcode table contained no valid
1354 * misc.c (name2i): Possibly abort if an invalid name is
1356 * ld-decode.c: Abort if the table type isn't found.
1358 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1360 * When performance monitoring is disabled, it is still possible to
1361 determine the simulation speed by looking at the number of elapsed
1362 ticks recorded by the event queue.
1364 * psim.c (psim_write_register, psim_read_register): Force the cpu
1365 to zero when it is either of `-1' or `nr_cpus'. In both cases the
1366 next cpu would be zero any way.
1368 * mon.c (mon_print_info): If possible, print the system cycle
1369 performance. This is an indication of the number of instructions
1372 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1374 * The code to allow an event queue to be updated during a signal
1375 was missing. For main.c, a cntrl-c simulation termination wasn't
1378 * The simulation would not correctly restart if an event requested
1379 that the simulation be halted.
1381 * psim.c (psim_options): Add hack to -i option to optionally
1382 include a level vis -i2.
1383 (psim_usage): Document.
1385 * main.c (cntrl_c, cntrl_c_simulation): New functions. When a
1386 cntrl-c occures schedule an event to halt the simulation.
1387 (main): Catch CNTRL-C signals with the function cntrl_c.
1389 * events.c (event_queue_process): Mask interrupts while
1390 manipulating the async event queue.
1391 (event_queue_init): Ditto.
1392 (event_queue_schedule_after_signal): Ditto.
1394 * events.c (event_queue_process): Mark the event queue as being in
1395 the processing state when processing has started. Adjust code
1396 so that it is tolerant of halts.
1397 (event_queue_init): Start the event queue out with processing
1399 (event_queue_tick): Check that processing isn't still being
1402 * gen-idecode.c (print_run_until_stop_body): Call
1403 event_queue_process_events to clear possibly pending events before
1404 starting a simulation run. Re-arange main loop so that simulator
1405 is correctly restarted when an event halts the simulation.
1407 * psim.c (psim_halt): Handle an event halting the simulation.
1408 * psim.c (psim_init): Adjust initial cpu - == -1 - to match
1411 Wed Jan 29 12:14:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1413 * ppc-opcode-complex: Correct typo - was expanding ORA instead of
1414 RA. Based on instruction frequency stats, expand additional
1416 * ppc-instructions: Change all `RA == 0' to RA_is_0.
1418 * ppc-opcode-stupid: Move all but the basic table in -complex into
1419 here. Update to new format.
1421 * Makefile.in (tmp-defines): New target. Force defines.h to always
1422 be built. Hence get ppc-opcode-goto to build.
1424 Tue Jan 28 13:00:19 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1426 * hw_com.c (hw_com_instance_read, hw_com_instance_write):
1429 Thu Jan 23 09:07:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1431 * hw_trace.c (hw_trace_init_data): Delete. The trace options need
1432 to be initialized independant of the rest of the simulation
1433 initalization. Otherwize a trace option explictly set from gdb
1434 could be overridden by hw_trace.
1436 * psim.c (psim_options): Clarify reason why the trace ioctl occures.
1438 * FIXME: The trace code is too scattered - hw_trace.c, psim.c,
1439 debug.c. It could be much simpler.
1441 Thu Jan 23 09:07:26 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1443 * Some devices support removable media. Add hooks to the disk
1444 device so that it supports this.
1446 * device.c (device_add_string_array_property,
1447 device_find_string_array_property): New functions, manipulate
1448 properties containing an array of strings.
1449 (device_find_string_property): Allow a string array.
1450 (device_init_static_properties): Update.
1451 (device_init_runtime_properties): Update.
1453 * hw_disk.c (hw_disk_ioctl): Add ioctl for changing the disk
1454 media. If no file image is specified, use the next one in the
1455 image property list.
1456 (hw_disk_init_address): Change the file property so that it is a
1457 string array - use the first entry for the initial file image.
1459 * tree.c (print_string_aray_property): New function - print a
1461 (print_properties): Adjust.
1462 (print_string): Write a string, handling double quotes.
1464 * device.h: Define an ioctl to `change-media' with an optional new
1467 * hw_disk.c: Allow floppy disk devices to be specified.
1469 * psim.c (psim_command): New function, parse more complex psim
1470 commands such as "change-media" and "trace".
1471 * sim_calls.c (sim_do_command): Use.
1473 Wed Jan 22 09:38:33 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1475 * For expressions like (RA == 0) that are entered in to the cache
1476 as RA_is_0. If possible generate the result of the expression so
1477 that the compiler gets a better chance of eliminating dead
1480 * gen-icache.c (print_icache_extraction): For a cache entry of
1481 the form <name>_is_<const> where it is a boolean field, generate
1482 the result of the expression instead of the expression its self.
1483 (print_icache_body): Remove code that was looking for *_is_0 and
1484 then generating corresponding definitions.
1486 * gen-icache.c (print_icache_struct): If there is no cache, do not
1487 output expressions in idecode.h file.
1489 * gen-icache.c (print_icache_body): Output them here.
1491 * ppc-opcode-complex: Clarify constant values for SPR==LR register
1494 * ppc-cache-rules (RA_is_0, SPR_is_256): Two new cache entries.
1496 Wed Jan 22 12:24:52 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1498 * The code that put values in and extracted values from the cache
1499 was too compilicated. The cache table did not allow values to be
1500 computed from cache entries. #defines could only be used when a
1501 cache was present, remove the restriction.
1503 * ld-cache.h, ld-cache.c: Add a new cache entry type - SCRATCH. A
1504 scratch variable is defined when a cache entry is beinf
1505 filled. Change the definition of a COMPUTE variable to be defined
1506 when the cache entry is being used.
1507 * gen-icache.c: Update.
1509 * ld-cache.h, ld-cache.c: Change field names so that their meaning
1510 is more obvious. old_name->field_name, new_name->derived_name.
1511 * gen-icache.c: Update
1513 * gen-icache.h, gen-icache.c (print_icache_body): Make the three
1514 different types of cache code - put into cache, extract from
1515 cache, no cache - an explicit argument to print_icache_body.
1516 * gen-icache.c (print_icache_extraction): Ditto.
1518 * gen-semantics.c (print_c_semantic): Update use.
1519 * gen-idecode.c (print_jump_insn): Update use.
1520 * gen-icache.c (print_icache_function): Update use.
1522 * igen.c (main): Change 'R' option so that it does not force the
1525 * configure.in (enable-sim-icache): Clarify description. Make
1526 #define one of the defaults regardless of the cache. Probably
1527 should revamp and add a separate option.
1529 Tue Jan 21 13:26:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1531 * pk_disklabel.c (block_is_fdisk): Tidy up traces - use dos
1532 partition numbering.
1533 (pk_disklabel_create_instance): Partition 1..4 are valid - not
1535 (is_iso9660): New function, verify a CD9660 File system.
1536 (pk_disklabel_create_instance): Start expanding so that active
1537 partition selection is supported.
1539 Mon Jan 20 11:20:15 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1541 * The cap object was retaining a reference to the instance of a
1542 device after it was deleted. Instead add and remove cap's from the
1543 cap db as they are created and deleted. This ensuring that a
1544 capibility is only used during the lifetime of the corresponding
1547 * cap.h, cap.c: Correct cap type - was signed32 should be
1550 * cap.c (cap_add, cap_remove): New methods for cap object that
1551 allow the explicit addition and removal of internal objects that
1552 the cap knows about.
1554 * cap.c (cap_init): Rewrite. Verify that the only objects
1555 remaining in the cap data base are those that were entered first.
1556 Thse objects will be the permenant ones.
1557 * device.c (device_init_address): Remember to initialize the cap
1560 * device.c (device_create_instance_from): Explicitly add device
1561 instances to the cap database. Simplify create code.
1562 (device_instance_delete): Explicitly remove device instances from
1565 * device.c (device_create_from): Explicitly add a device to the
1568 * device.c (device_create_from): Always set the cap members.
1570 * hw_disk.c: Output the instance when tracing.
1572 Sun Jan 19 16:44:29 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1574 * tree.c (split_device_specifier): Add support for aliases when
1575 looking up a device. Now needs a device as an argument.
1576 (split_property_specifier): Ditto.
1578 Sun Jan 19 15:28:23 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1580 * The memory "claim" and "release" methods take an address and
1581 size as arguments. These may be multi cell values. Initially fix
1582 the memory code so that they check/detect this. Leave the
1583 adjustment of any clients to later.
1585 * hw_memory.c (hw_memory_instance_claim,
1586 hw_memory_instance_release): Handle multi-cell memory devices.
1588 * hw_memory.c (hw_memory_instance_claim): Be tolerant towards the
1589 release of memory regions that were not claimed.
1591 Fri Jan 17 12:01:07 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1593 * device.h, device.c (device_instance_call_method): Correct return
1594 type - can return either 0 or -1, hence should be a signed type.
1595 * device_table.h: Ditto.
1597 * hw_memory.c (hw_memory_instance_claim,
1598 hw_memory_instance_release): Update.
1599 * hw_disk.c (hw_disk_max_transfer, hw_disk_block_size,
1600 hw_disk_nr_blocks): Ditto.
1602 Fri Jan 17 11:50:13 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1604 * emul_chirp.c (chirp_emul_claim): Implement using the "claim"
1605 method belonging to "/chosen/memory".
1606 (chirm_emul_release): Ditto.
1608 * Makefile.in (LIB_INLINE_SRC): Remove emul_* from list of files
1609 that are inlined. These modules are called via a table and are
1612 * hw_init.c (update_for_binary_section): Fix failure to allocate
1613 memory used by the binary in real-mode executions. If "claim"
1614 property is present, allocate memory from the "/chosen/memory"
1617 * emul_chirp.c (emul_chirp_create): Specify that memory should be
1618 claimed when loading a real image.
1620 * hw_memory.c (hw_memory_instance_claim): Don't page align memory
1623 * hw_memory.c (hw_memory_instance_release): Avoid infinite loop
1624 when merging adjacent memory chunks.
1626 Thu Jan 16 08:51:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1628 * vm.h (vm_data_map_read_buffer, vm_data_map_write_buffer): Add
1629 optional PROCESSOR & CIA args so that this routine also abort an
1632 * vm_n.h (vm_data_map_read_N, vm_data_map_write_N): For a
1633 miss-aligned access when a transfer fails abort.
1635 * emul_bugapi.c (emul_bugapi_do_write): Use emul_read_buffer
1636 instead of the vm_read_buffer.
1637 * emul_netbsd.c (do_write): Ditto.
1638 * emul_unix.c (do_unix_write): Ditto.
1640 Wed Jan 15 14:38:25 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1642 * configure.in (--enable-sim-jump): Default is NULL and not -E.
1643 * configure: Regenerate.
1645 * basics.h (__attribute__): Enable attributes if GCC >= 2.6.
1646 (UNUSED): Only enable UNUSED if GCC >= 2.7.
1648 * gen-icache.c (print_icache_extraction): Print UNUSED macro
1649 instead of explicit __unused__ attribute.
1650 (print_icache_body): Ditto.
1651 * idecode_expression.h (FPSCR_BEGIN): Use UNUSED.
1653 Wed Jan 15 13:54:50 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1655 * cpu.h, cpu.c (cpu_synchronize_context): Add CIA argument as
1658 * vm.c (vm_synchronize_context): Add PROCESSOR and CIA as
1659 arguments so that there is a reference point for recovery.
1660 (vm_synchronize_context): Pass processor+cia for errors.
1661 (om_unpack_sr): Ditto.
1662 (om_unpack_srs): Ditto.
1663 * vm.c (vm_create): Review error messages.
1665 * vm.c: Include "cpu.h" so that cpu_error is visible.
1667 * ppc-instructions (Return From Interrupt): Pass CIA.
1668 (Instruction Synchronize): Ditto.
1669 * psim.c (psim_init): Ditto.
1671 Wed Jan 15 12:25:11 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1673 * cpu.h, cpu.c (cpu_error): Aborts simulation with error message,
1674 but also saves current processor state.
1676 * basics.h: Move #include <stdarg.h> to here from device_table.h.
1678 * interrupts.c (perform_oea_interrupt): Use. No longer loose CIA
1679 when simulation aborted.
1680 (program_interrupt): Ditto.
1681 (floating_point_unavailable_interrupt): Ditto.
1682 (alignment_interrupt): Ditto.
1683 (floating_point_assist_interrupt): Ditto.
1684 (perform_oea_interrupt): Ditto.
1685 (machine_check_interrupt): Ditto.
1687 Tue Jan 14 12:19:10 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1689 * ppc-instructions (Move from Special Purpose Register): Support
1692 Mon Jan 13 16:58:12 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1694 * debug.h, debug.c: Add "interrupts" trace option.
1696 * interrupts.c (data_storage_interrupt): Add tracing.
1697 (machine_check_interrupt): Ditto.
1698 (instruction_storage_interrupt): Ditto.
1699 (alignment_interrupt): Ditto.
1700 (program_interrupt): Ditto.
1701 (floating_point_unavailable_interrupt): Ditto.
1702 (system_call_interrupt): Ditto.
1703 (floating_point_assist_interrupt): Ditto.
1704 (deliver_hardware_interrupt): Ditto.
1706 * interrupts.c (program_interrupt): For UEA mode, halt the
1707 processor - so that the current state is saved - instead of
1709 (floating_point_unavailable_interrupt): Ditto.
1710 (floating_point_assist_interrupt): Ditto.
1712 Thu Jan 2 09:10:41 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1714 * interrupts.c (perform_oea_interrupt): Halt rather than abort on
1717 Wed Jan 1 22:54:52 1997 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1719 * ppc-instructions (Store Multiple Word, Load Multiple Word):
1722 * tree.c (print_properties): For an array consider printing it out
1723 as an integer array.
1725 * hw_memory.c (hw_memory_init_address): If an "available" property
1726 is present, use that to initialize the available memory instead of
1727 using the reg property.
1729 * emul_generic.c (emul_add_tree_hardware): Add "available"
1730 property to memory device.
1732 Fri Dec 20 13:19:07 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1734 * ppc-instructions (Rotate Left Word then AND with Mask): Enable.
1736 * device.c (device_instance_call_method): Was only looking at the
1739 * hw_disk.c (hw_disk_nr_blocks): Implement #blocks method.
1740 (hw_disk_block_size): Implement block-size method.
1741 (hw_disk_max_transfer): Implement max-transfer method.
1743 * hw_phb.c (hw_phb_init_address): Reinit the rest of the PHB.
1745 * emul_chirp.c (chirp_emul_instance_to_path): Recover from an
1747 (chirp_emul_instance_to_package): Ditto.
1748 (chirp_emul_method): Ditto.
1749 (chirp_emul_read): Ditto.
1750 (chirp_emul_write): Ditto.
1751 (chirp_emul_close): Ditto.
1752 (chirp_emul_seek): Ditto.
1753 (chirp_emul_package_to_path): Ditto (for phandle).
1754 (chirp_emul_package_to_path): Return the length.
1756 * psim.c (psim_merge_device_file): Allow continuation lines.
1758 Thu Dec 19 11:09:43 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1760 * emul_chirp.c (chirp_emul_boot): Implement. Well report the new
1763 * emul_chirp.c (chirp_emul_exit): Correct type of args struct
1764 members - *_cell not host dependant int.
1766 Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1768 * interrupts.c (perform_oea_interrupt): Print additional
1769 information if a double interrupt is encountered.
1771 Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1773 * psim.c (psim_merge_device_file): Tolerate an incorrect file-name
1774 being specified with the -f option.
1775 (psim_merge_device_file): Correct check for end of string.
1777 Wed Dec 18 17:49:59 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1779 * emul_chirp.c (chirp_emul_peer): Was falling off the end of the
1780 list of devices. Return zero to the client instead.
1781 * emul_chirp.c (chirp_emul_child): Ditto
1782 * emul_chirp.c (chirp_emul_parent): Ditto
1784 * device.c (device_root): Assert assumption about the device being
1787 Tue Dec 17 15:12:38 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1789 * emul_chirp.c (emul_chirp_create): Add description property to
1790 each significant node in the device tree.
1791 * emul_bugapi.c (emul_bugapi_create): Ditto.
1793 Fri Dec 13 14:30:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1795 * main.c (sim_io_read_stdin): For a single byte STDIO read, use a
1796 tempoary two byte buffer. Single byte read with fgets will not
1798 * main.c: Include errno.h.
1799 (sim_io_read_stdin): For non-STDIO, make it work.
1801 * emul_chirp.c (chirp_emul_read): Return the correct error status.
1803 Fri Dec 13 14:30:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1805 * std-config.h (WITH_STDIO): Don't hard-wire the STDIO mechanism.
1806 Instead have each emulation default it to DO_USE_STDIO.
1808 * emul_generic.c (emul_add_tree_options): Select the STDIO I/O
1809 mechanism as the default if enabled or if nothing selected.
1811 * sim_calls.c (sim_io_read_stdin): Passify GCC's desire for a
1813 (sim_io_write_stdout): Ditto.
1814 (sim_io_write_stderr): Ditto.
1815 * main.c (sim_io_write_stdout): Ditto.
1816 (sim_io_write_stderr): Ditto.
1817 (sim_io_read_stdin): Ditto.
1819 Tue Dec 10 10:31:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1821 * emul_chirp.c (emul_chirp_instruction_call): Make *printf calls
1823 * vm.c (om_effective_to_virtual): Ditto.
1824 * events.c (event_queue_schedule{,_after_signal}): Ditto.
1825 (event_queue_{deschedule,process}): Ditto.
1826 * hw_htab.c (htab_decode_hash_table): Ditto.
1827 (htab_map_{page,binary}): Ditto.
1828 * hw_opic.c (hw_opic_init_data): Ditto.
1829 (handle_interrupt): Ditto.
1830 (do_processor_init_register_{read,write}): Ditto.
1831 (write_vector_priority_register): Ditto.
1832 ({read,write}_destination_register): Ditto.
1833 (do_suprious_vector_register_{read,write}): Ditto.
1834 (do_current_task_priority_register_N_{read,write}): Ditto.
1835 (do_timer_frequency_reporting_register_{read,write}): Ditto.
1836 (do_timer_N_{current,base}_count_register_{read,write}): Ditto.
1837 (do_ipi_N_dispatch_register_write): Ditto.
1838 (do_vendor_identification_register_read): Ditto.
1839 (do_feature_reporting_register_N_read): Ditto.
1840 (do_global_configuration_register_N_{read,write}): Ditto.
1841 * hw_phb.c (hw_phb_attach_address): Ditto.
1842 (hw_phb_unit_decode): Ditto.
1843 (hw_phb_address_to_attach_address): Ditto.
1844 (hw_phb_io_{read,write}_buffer): Ditto.
1845 * hw_ide.c (setup_fifo): Ditto.
1847 * sim_calls.c ({defs,callback,remote-sim}.h): Find gdb include
1848 files via -I<dir> instead of using "../../gdb/" prefixes.
1850 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1852 * debug.h: Add tracing for the pal device.
1855 * emul_chirp.c (chirp_emul_getprop): More tracing.
1857 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1859 * device.h, device.c (device_find_ihandle_runtime_property): New
1860 function. Reverse of add_ihandle_runtime property.
1861 (device_init_runtime_properties): Use it.
1863 * device.c (find_property_entry): New function returns the
1864 internal property spec.
1865 (device_set_property): Use.
1866 (device_find_property): Use.
1868 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1870 * psim.c (psim_merge_device_file): Strip newline from device
1873 Tue Dec 10 10:12:44 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1875 * hw_htab.c (htab_map_binary): For overlapping text / data maps
1876 merge the two. Also check that the merge is safe.
1878 * emul_chirp.c (emul_chirp_create): Add a description property to
1879 the pte's so that they are easier to identify.
1881 (emul_chirp_create): Don't specify a load address for the CHRP
1882 image. Always use the values specified by the executable.
1884 * hw_htab.c (htab_map_page): Abort if a duplicate map is
1887 Mon Dec 9 12:08:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1889 * hw_htab.c (htab_map_page): Formatting.
1891 * emul_chirp.c (emul_chirp_instruction_call): Check for a NULL
1892 method name when handling the client call. Also check for other
1895 * emul_chirp.c (emul_chirp_create): Allow real-mode?, real-base,
1896 etc to be overriden.
1898 Mon Dec 9 12:08:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1900 * os_emul.c (os_emul_create): Use tree find property instead of
1901 device find property - sigh.
1903 Thu Dec 5 10:46:42 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1905 * 961205: Release snapshot 961205.
1907 Thu Dec 5 10:46:42 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1909 * configure.in (hostbitsize, bitsize): Fix typo in error message -
1910 cannot contain a comma.
1911 (sim-warnings): Check for more potential errors.
1913 * psim.c (psim_usage): Add -f <file> option. Specifies a file
1914 containing device tree specifications that should be merged into
1917 * configure.in: Sort options.
1918 * configure: Rebuild
1920 Wed Dec 4 13:57:31 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1922 * psim.c (psim_usage): Add -n option - specify number of
1925 * emul_chirp.c: Add description.
1926 * emul_bugapi.c: Ditto.
1927 * emul_unix.c: Ditto.
1928 * emul_netbsd.c: Ditto.
1930 Fri Nov 29 11:12:22 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1932 * hw_pal.c (hw_pal_attach_address): New function, if an attach is
1933 encountered, assume that it is the single disk.
1934 * hw_pal.c: Add generic device/size decode methods.
1936 * hw_nvram.c (hw_nvram_init_address): Use the first nonzero reg
1937 property entry when determining the nvram size.
1939 * hw_core.c: Add generic address/size decode methods.
1941 * emul_chirp.c (emul_chirp_instruction_call): Return and trace
1942 nonzero status from client functions.
1944 * main.c (error): Always include a cariage return when writing out
1947 Wed Nov 20 00:36:55 1996 Doug Evans <dje@canuck.cygnus.com>
1949 * sim_calls.c (sim_resume): Reset sim_should_run if single
1952 Thu Nov 28 13:19:46 1996 Andrew Cagney <cagney@kremvax.tpgi.com.au>
1954 * emul_bugapi.c (emul_bugapi_do_diskio): Add support for multiple
1957 * emul_generic.c (emul_add_tree_hardware): Drop the dummy eeprom.
1958 Attach the pal - for I/O - as a pseudo device haning from the
1961 * emul_bugapi.c (emul_bugapi_create): Add a small memory device to
1962 the device tree at the address of the hi-mem interrupt vector
1963 addreses. Used by bugapi to establish its trap instructions.
1965 * debug.h: Add a new macro DITRACE for tracing device instances.
1967 * debug.h: Extend the DTRACE macro so that it can also tests for
1968 device specific tracint.
1970 * device.h, device.c (device_trace): Add method to determine
1971 device specific tracing.
1972 (device_init_address): Set the devices tracing level.
1974 Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
1976 * tree.h, tree.c (tree_device): New files - separate out the
1977 device parser and other tree operations from the device.
1979 * inline.h, inline.c (INLINE_TREE): Add.
1980 * device.h, device.c (device_tree_add_parsed): Delete.
1981 * Makefile.in (tree.c): Add rules for new file.
1982 * Makefile.in: Better order the emul_* files.
1984 * emul_generic.c (emul_add_tree_hardware): Update.
1985 * emul_netbsd.c (emul_netbsd_create): Update.
1986 * emul_unix.c (emul_unix_create): Ditto.
1987 * emul_chirp.c (emul_chirp_create): Ditto.
1988 * emul_bugapi.c (emul_bugapi_create): Ditto.
1989 * psim.c (psim_tree): Ditto.
1992 * emul_generic.h: Include tree.h
1993 * Makefile.in: Add to EMUL_GENERIC_H dependencies.
1995 * device.h, device.c (device_root): New function - returns the
1999 * device.h, device.c (device_clean): New function, clean up device
2000 ready for next simulation run. This includes things like deleting
2001 interrupt edges and properties created during the simulation and
2002 also scrubbing any pre-defined properties.
2003 * tree.c (tree_init): Use.
2005 * device.h, device.c (device_init_static_properties): New
2006 function. Initialize any static predefined properties. By static
2007 we mean those that have values that can be determined before the
2008 device tree initialization has started.
2009 * tree.c (tree_init): Use.
2011 * device.h, device.c (device_init_address): Add code to
2012 check/verify the devices #address-cells and #size-cells.
2013 (device_add_integer_property): Delete corresponding code.
2014 (device_nr_address_cells, device_nr_data_cells): Check for
2015 property when returning value.
2017 * device.h, device.c (device_init_runtime_properties): New
2018 function. Initialize those properties that are not `static'. At
2019 present the only such property is the ihandle.
2020 * tree.c (tree_init): Use.
2022 * device.h, device.c (reg, ranges): Rework these so that they use
2023 an array of the fundamental type - single reg or single range
2026 * device.h, device.c (device_add_ihandle_runtime_property):
2027 Re-implement the adding of an ihandle during tree construction so
2028 that it better fits in with device initialization.
2030 Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2032 * device.h, device.c (device_ioctl): Add additional argument -
2033 request - so that the caller must always specify the type of
2036 * device_table.h: Update.
2037 * hw_trace.c (hw_trace_ioctl): Ditto.
2038 * hw_vm.c (hw_vm_ioctl_callback): Ditto.
2039 * hw_init.c (hw_stack_ioctl_callback): Ditto.
2040 * psim.c (psim_options): Ditto.
2042 Thu Nov 21 12:05:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2044 * BUGS: Updated a bit.
2046 Wed Nov 20 14:06:37 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2048 * hw_opic.c: Finish - third round.
2050 Wed Nov 20 12:02:08 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2052 * hw_glue.c (hw_glue_io_read_buffer_callback): Fix miscalc of glue
2054 (hw_glue_io_write_buffer_callback): Ditto.
2056 Tue Nov 19 21:17:08 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2058 * events.c (event_queue_process): Was incorrectly consuming future
2059 events on the queue when they should be left alone.
2061 * debug.h, debug.c (events): Add support for event queue tracing.
2062 * events.c: Add event tracing.
2064 * debug.h, debug.c: Order device trace options.
2066 Fri Nov 15 15:23:39 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2068 * pk_disklabel.c (pk_disklabel_create_instance): Fix up some
2069 warnings generated by GCC.
2071 Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2073 * sim-endian.h: Add LE versions of byte swap macros. Needed for
2074 PCI devices which are little-endian.
2076 * sim-endian-n.h (endian_le2h_N, endian_h2le_N): Ditto
2078 Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2080 * hw_iobus.c (hw_iobus_attach_address_callback): Change the iobus
2081 so that it is implementing a 1-1 address map.
2083 * emul_generic.c (emul_add_tree_hardware): Adjust.
2085 * emul_generic.c (emul_add_tree_hardware): Don't add the nvram as
2088 Sun Nov 17 17:59:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2090 * device.c (split_find_device): Be tolerant of missing unit
2093 Fri Nov 15 16:49:49 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2095 * basics.h (port_direction): New type, specify the direction of
2098 * device.h, device.c (device_interrupt_decode): Include
2099 specification of port direction in operations.
2100 (device_interrupt_encode): Ditto.
2102 * device_table.h: Add a direction field to the interrupt port
2105 * device.c (device_tree_add_parsed): Specify port direction.
2107 Thu Nov 14 21:38:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2109 * hw_opic.c: Finish - second round.
2111 Thu Nov 7 00:18:59 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2113 * hw_htab.c (htab_init_data_callback): Allow the virtual-address
2114 to be specified as an array which allows 64bit addresses.
2116 * device.c (device_find_integer_array_property): New function.
2117 Simplify the querying of elements of an integer array.
2118 (device_add_integer_property, device_find_integer_property):
2119 Update to correctly use the cell type.
2121 * vm.c (om_unpack_sr): Clarify shifting comment.
2122 (om_pte_0_masked_vsid): Ditto. Add 64bit version.
2124 * emul_chirp.c (emul_chirp_create): Initialize the segment
2127 * vm.c (om_effective_to_virtual): Trace segment register use.
2129 * hw_htab.c (htab_map_page): Print out the pteg base address to
2130 simplify cross checking between vm and the htab.
2131 (htab_decode_hash_table): Use device_error instead of error.
2132 (htab_map_page): Ditto.
2133 (htab_dma_binary): Ditto.
2134 (htab_map_binary): Ditto.
2135 (htab_init_data_callback): Ditto.
2137 Wed Nov 6 20:20:58 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2139 * interrupts.h: Clarify what the optional instruction program
2140 interrupt is - a subset of illegal instruction program interrupt.
2142 * interrupts.c (program_interrupt): For UEA mode, clarify what an
2143 optional instruction program interrupt is.
2144 (program_interrupt): For OEA mode, as per spec, generate an
2145 illegal instruction program interrupt when an optional instruction
2148 * gen-semantics.c (print_semantic_body): Delete code
2149 differentiating between an unimplemented floating point and normal
2150 instruction. Instead, such a case can be handled explicitly.
2152 * ppc-instructions (store floating-point as integer word indexed):
2154 (Floating Convert to Integer Doubleword): Make the floating point
2155 assist interrupt explicit.
2156 (Floating Convert To Integer Doubleword with round towards Zero):
2158 (Floating Convert To Integer Word): Ditto
2159 (Move From FPSCR): Ditto.
2160 (Move to Condition Register from FPSCR): Ditto.
2161 (Move To FPSCR Fields): Ditto.
2162 (Move To FPSCR Field Immediate): Ditto.
2163 (Move To FPSCR Bit 0): Ditto.
2164 (Move To FPSCR Bit 1): Ditto.
2166 Mon Nov 4 12:49:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2168 * corefile.c (core_map_read_buffer, core_map_write_buffer): Avoid
2169 breaking up transfers.
2171 * corefile.c: Adjust arguments so that the client server
2172 relationship is clarified.
2174 * hw_glue.c (hw_glue_init_address): Update so it can be attached
2177 * hw_disk.c (hw_disk_instance_write): Add more checks to disk IO -
2178 looking for things like overflow/underflow.
2180 Sun Nov 3 18:45:20 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2182 * emul_generic.c (emul_add_tree_hardware): Hang the disk off the
2183 PAL device instead of the IOBUS. The disk must be attached to a
2186 * hw_disk.c (hw_disk_init_address): Just use the unit address
2187 directly in the attach - the rest isn't relevant.
2189 Sat Nov 2 21:48:57 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2191 * configure.in (sim-hardware, sim-packages): Allow additional
2192 hardware and packages to be prefixed as well as appended.
2194 * Makefile.in (tmp-hw, tmp-pk): Retain the user specified order of
2195 packages when building them. Consequently, a user can override a
2196 standard device by prefixing their own version.
2198 * Makefile.in (hw_opic.o, hw_pci.o, hw_ide.o): Add dependencies.
2200 Fri Nov 1 14:42:57 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2202 * mon.c (_cpu_mon): Add fields for counting 1, 2, 4, and 8 byte
2204 (mon_{read,write}): Count 1, 2, 4, and 8 byte reads/writes.
2205 (mon_print_info): Correct typo regarding # of unaligned reads and
2206 writes. Print out how many 1, 2, 4, and 8 byte reads/writes there
2209 Tue Oct 29 17:55:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2211 * configure.in (AC_CHECK_FUNCS): Add access.
2212 * config{.in,ure}: Regenerate.
2214 * emul_unix.c (do_unix_nop): System call that always succeeds.
2215 (do_unix_access): Support access system call.
2216 (solaris_descriptors): Make sigaltstack and sigaction nops.
2217 ({solaris,linux}_descriptors): Add support for access.
2219 Tue, 8 Oct 18:42:26 1996 Jason Molenda <crash@cygnus.co.jp>
2221 * Makefile.in (clean): Move config.log to distclean.
2223 Fri Nov 1 16:44:28 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2225 * corefile-n.h (core_map_write_N): Improve abort messages.
2227 * device.h, device.c (device_attach_address): Remove unused name
2229 (device_detach_address): Ditto.
2230 * device_table.h, device_table.c: Update.
2231 * hw_iobus.c (hw_iobus_attach_address_callback): Ditto.
2232 * hw_nvram.c (hw_nvram_init_address): Ditto.
2233 * hw_memory.c (hw_memory_init_address): Ditto.
2234 * hw_vm.c (hw_vm_init_address_callback): Ditto.
2235 (hw_vm_attach_address): Ditto.
2236 (hw_vm_add_space): Ditto.
2237 * hw_init.c (update_for_binary_section): Ditto.
2238 * hw_core.c (hw_core_attach_address_callback): Ditto.
2240 * hw_iobus.c (hw_iobus_attach_address_callback): Rewrite to handle
2241 configurable parent busses.
2243 Wed Oct 30 18:46:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2245 * device_table.c (generic_device_size_to_attach_size): Provide
2246 limited support for multi-cell sizes.
2247 (generic_device_address_to_attach_address): Ditto for addresses.
2249 Tue Oct 29 02:01:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2251 * device.c (device_add_integer_property): Check for setting of
2252 #address-cells and #size-cells properties. For these, update the
2253 corresponding device values.
2254 (device_nr_address_cells, device_nr_size_cells): Use the value
2255 from the device instead of the property.
2257 * hw_core.c: Use generic address and size conversions for the top
2260 * hw_memory.c (hw_memory_init_address): Tolerate case where
2261 #address and #size cells is greater than 1.
2263 * device.c (device_tree_print_device): Clean out printing of
2266 * device.c (split_device_specifier): Don't detect comments here -
2267 "#" can be a valid prefix - eg #size-cells.
2269 * psim.c (psim_merge_device_file): Suppress comments and blank
2272 * emul_generic.c (emul_add_tree_hardware): Fix typo of incorrect
2273 pal unit address. Add the property /#address-cells to the root of
2276 * device.c (device_template_create_device): Check that the unit
2277 address was successfully parsed.
2279 * device_table.c (generic_device_unit_decode): Rewrite to better
2280 handle multi-cell addresses.
2281 (generic_device_unit_encode): Ditto.
2283 * emul_generic.c (emul_add_tree_hardware): "reg" properties no
2284 longer need the explicit array type - the parser takes care of it.
2286 * pk_disklabel.c (pk_disklabel_create_instance): Add NULL return
2289 Mon Oct 28 22:55:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2291 * hw_ide.c: New file. Model of a basic IDE interface attached to
2294 * configure.in (hardware): Add the ide device to the default
2296 * configure: Regenerate.
2298 * debug.h, debug.c: Add tracing option for the IDE device.
2300 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2302 * hw_phb.c, hw_phb.h: New files - implement a PHB.
2304 * configure.in (hardware): Add the phb to the list of devices to
2307 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2309 * hw_com.c: Review description.
2312 * hw_eeprom.c: Ditto.
2316 * hw_com.c: Update event handling.
2318 * hw_disk.c: Implement tracing.
2320 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2322 * device_table.c (generic_device_init_address): Use
2323 assigned-addresses property in preference to any other reg
2326 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2328 * device.h, device.c (device_find_ranges_property): New function.
2329 Simplify the manipulation of "ranges" properties.
2331 * device.c (device_add_parsed): Extend to include support for the
2334 * device.c (device_add_parsed): Add assigned-addresses to the list
2335 of reg type properties.
2337 * device.c (device_tree_print_device): Add code to format and
2338 print a ranges property.
2340 * device.h, device.c (device_nr_address_cells,
2341 device_nr_size_cells): New functions. Determine the values of the
2342 standard properties #address-cells and #size-cells. Both of which
2343 are optional and have default values of two and one respectfuly.
2344 Previously, code that determined #address-cells was incorrectly
2345 using a value of one.
2347 Fri Oct 25 21:28:25 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2349 * debug.h, debug.c: Sort debug options, Add entries for the
2352 Fri Oct 18 12:12:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2354 * ppc-instructions (Floating Select): Add support for fsel unless
2355 model is 601. Allow user to filter out instruction unless -Fs is
2357 (Store Floating-Point as Integer Word Indexed): Raise optional
2358 instruction program abort. Allow user to filter out instruction
2359 unless -Fs is passed to igen.
2360 (Floating Square Root{, Single}): Ditto.
2361 (Floating Reciprocal Estimate Single): Ditto.
2362 (Floating Reciprocal Square Root Estimate): Ditto.
2364 * configure.in (--enable-sim-filter): If not passed, pass 32,f,s
2366 * configure: Regenerate.
2368 * interrupts.h (program_interrupt_reasons): Add
2369 optional_instruction_program_interrupt.
2371 * interrupts.c (program_interrupt): Call error with more detailed
2372 information on program interrupts, particularly in user mode. Add
2373 support for optional_instruction_program_interrupt.
2375 Wed Sep 25 10:20:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2377 * hw_glue.c: New device. Hooks for manipulating interrupt ports.
2379 * debug.h, debug.c (trace_glue_device): Add tracing support for
2380 the interrupt glue logic device.
2382 * configure.in (hardware): Add glue device.
2383 * configure: Regenerate.
2385 Tue Sep 24 20:55:38 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2387 * device.c (device_tree_parse_integer_property): New function,
2388 parse a list of integers as an array property.
2389 (device_tree_add_parsed): Call it.
2391 * device.c (device_tree_parse_string_property): New function,
2392 parse a list of strings as a string property (with embeded
2393 null's). For moment, don't try to implement a complext string
2395 (device_tree_add_parsed): Call it.
2397 Tue Sep 24 16:30:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2399 * hw_opic.c: New file. OpenPIC interrupt controller.
2401 * configure.in (hardware): Add opic device.
2402 * configure: re-generate.
2404 * hw_pic.c: Delete, replaced with hw_opic.c.
2406 * debug.h, debug.c: Add debug option for OpenPIC device. -
2409 Tue Sep 24 16:30:48 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2411 * Makefile.in (psim.o, idecode.o): Since idecode and not psim is
2412 now the file that does all the inlining.
2414 * Makefile.in (LIB_SRC, LIB_INLINE_SRC, idecode.o): Break out the
2415 library source code that could be involved in an inlining. Make
2416 idecode.o only dependant on the inlined library source code.
2418 * Makefile.in (LIB_OBJ): Put options last on the list so that it
2421 * std-config.h (DEVICE_INLINE): Only inline locals when the
2422 default is to inline.
2424 Mon Sep 23 00:37:49 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2426 * hw_htab.c (htab_sum_binary): Determine the real-base for the
2429 * hw_htab.c (htab_map_binary): Depending on the value of the
2430 load-base, either map the program in as a contiguous section or as
2431 separate sections controled by th binaries lma values.
2432 (htab_init_data_callback): Ditto.
2434 Sun Sep 22 15:56:22 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2436 * emul_generic.c (emul_add_tree_options): Remove load-base option.
2438 * emul_chirp.c (map_over_chirp_note): Add load_base field to note
2439 struct. Don't require the load_base field to be present - just
2440 issue warning - it is a recent addition.
2441 (emul_chirp_create): Support both virtual and physical modes.
2443 * emul_chirp.c (emul_chirp_create): Add a stack initialization
2444 property so that any arguments specified on the command line can
2445 be passed on to user programs.
2447 * hw_init.c (create_ppc_chirp_bootargs): Add support for chirp
2448 argument passing to the pseudo device stack.
2450 Sat Sep 21 19:39:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2452 * device.c (device_error): Make it more tolerant to incomplete
2455 * hw_init.c (hw_data_init_data_callback): Extend the data device
2456 so that it can perform initialization operations either dma or a
2457 more complex instance open, seek, write operation.
2458 * hw_init.c: Update the description of the data device to reflect
2461 Sat Sep 21 00:13:02 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2463 * device.c (device_event_queue_schedule,
2464 device_event_queue_deschedule, device_event_queue_time): Have the
2465 device object export the event operations. Making these available
2466 from the device object should hopefully simplify writing device
2469 Fri Sep 20 14:04:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2471 * configure.in (sim-hardware): Add eeprom device to default build.
2473 * hw_eeprom.c: Rewrite so it works.
2475 * debug.h, debug.c: Add tracing support for the eeprom and com
2478 Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2480 * debug.h: Add disklabel-package and disk-device trace options.
2481 debug.h (PTRACE): Add macro to simplify tracing in packages.
2483 Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2485 * device.c (device_create_instance_from): Tighten up loop
2486 searching for device instances.
2487 (device_instance_delete): Ditto.
2488 (device_instance_delete): Only leaf instances need to be removed
2489 from a devices list of active instances.
2491 Thu Sep 19 14:40:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2493 * hw_disk.c: Add the cdrom as an alias.
2495 * pk_disklabel.c (disklabel_delete): Implement, remembering to
2496 delete the raw disk instance while we're at it.
2498 * pk_disklabel.c (pk_disklabel_create_instance): Implement a
2499 little bit more - still a long way to go.
2501 * pk_disklabel.c (disklabel_write, disklabel_read): Remember the
2502 new head position after a read or write.
2504 Thu Sep 19 13:05:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2506 * emul_chirp.c (chirp_emul_read): Allow reads to be longer then
2507 the internal buffer.
2509 Thu Sep 19 13:05:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2511 * emul_chirp.c (chirp_read_t2h_args): Call memset-0 with the args
2512 in the correct order.
2514 * emul_chirp.c (chirp_emul_call_method): Correct computation for
2515 the address of the first stack argument passed in from the client
2518 Wed Sep 18 19:33:54 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2520 * words.h: Add new types signed_cell and unsigned_cell which
2521 correspond to the signed and unsigned IEEE 1275 memory locations.
2522 * device.h, device.c, emul_chirp.c: Where refering to an IEEE 1275
2523 memory cell, replace uses of unsigned32 with unsigned_cell.
2524 * device_table.h: Ditto.
2526 * sim-endian.h: Add new macros H2BE_cell and BE2H_cell which
2527 convert cell sized values to from big endian.
2528 * device.c, emul_chirp.c: Where refering to IEEE 1275 memory cells
2529 use these new macros.
2531 Tue Sep 17 15:57:44 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2533 * device.c (device_tree_add_parsed): Detect and report an
2534 interrupt being attached to an invalid device. Was dumping core.
2536 Mon Sep 16 23:09:12 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2538 * device.h, device.c (device_address_to_attach_address,
2539 device_size_to_attach_size): New functions. Convert a devices
2540 unit address or unit size structure into a form suitable for
2541 passing on to the attach and detach functions.
2542 * device_table.h: Add extra methods to device table.
2544 * device.h, device.c (device_find_reg_property): New function.
2545 For a reg type property, return the selected address + size
2546 tupple, along with a positive success status. Add a reg_property
2547 to the list of property types.
2548 * (device_tree_add_parsed): Make array properties with the name
2549 reg or alternate-reg of type reg_property.
2551 * hw_memory.c (hw_memory_init_address): Rewrite to use new
2552 find_reg_property method.
2553 * hw_nvram.c (hw_nvram_init_address): Ditto.
2555 * device.c (device_tree_print_device): Add code to print out a reg
2558 * device_table.c (generic_device_address_to_attach_address,
2559 generic_device_size_to_attach_size ): New functions. Generic
2560 functions for converting between unit and attach address or size.
2562 * device_table.c (generic_device_init_address): Rewrite to use the
2563 new find_reg and address convert functions. Look for both reg and
2564 alternate-reg properties.
2566 Mon Sep 16 23:09:12 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2568 * hw_com.c: New file. A '550 serial device that can quickly be
2569 attached to any bus.
2570 * configure.in (enable-sim-hardware): Add the com device.
2571 * configure: re-generate.
2573 Thu Sep 12 17:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2575 * device.c (device_tree_verify_reg_unit_address): New
2576 function. Check that the unit address as specified by the reg
2577 property correctly corresponds to any unit address previously
2578 specified by the devices name.
2579 (device_tree_add_parsed): When adding a reg property, verify
2580 that the unit-address - first value of property - correctly
2581 matches any previous value specified when creating the device
2584 Thu Sep 12 17:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2586 * mon.c (mon_event): Remove assertion that an unsigned is >= 0.
2588 Fri Aug 16 12:05:24 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2590 * device.c (device_full_name): Cast strdup to char *, since AIX
2591 3.2.5 mistakenly declares the function to be const char *.
2592 (device_create_from): Ditto.
2593 (device_create_instance_from): Ditto.
2594 (device_add_property): Ditto.
2596 Tue Aug 13 11:40:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2598 * debug.c (trace_option): For -t all, do not set the
2599 trace_dump_device_tree flag, so that the simulator is run.
2601 Tue Aug 13 11:40:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2603 * Makefile.in (options.o): Depend on defines.h.
2604 (defines.h): New rule, go through config.h and make strings of all
2605 of the #define HAVE_xxx macros.
2606 (distclean): Remove defines.h.
2608 * options.c (print_options): Print whether many of the
2609 configuration macros are defined.
2611 * main.c (main): If -t options and no filename, just print the
2612 options, and don't print the usage message.
2614 Mon Aug 12 18:42:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2616 * configure.in: Test whether /dev/zero works on the system, and if
2617 it does, define HAVE_DEVZERO.
2618 * configure: Regenerate.
2620 * emul_generic.c (emul_add_tree_hardware): Do not add /iobus/disk
2621 if we don't have a working /dev/zero on the system.
2623 * emul_bugapi.c (emul_bugapi_init): If HAVE_DEVZERO is not
2624 defined, don't add disk support.
2625 (emul_bugapi_do_diskio): Ditto.
2626 (emul_bugapi_instruction_call): Ditto.
2628 Wed Aug 7 14:34:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2630 * emul_unix.c (HAVE_TCGETATTR): If HAVE_TERMIOS_STRUCTURE is not
2631 defined, make sure HAVE_TCGETATTR is #undef'ed
2633 Wed Aug 7 14:34:20 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2635 * std-config.h (REGPARM): Only define REGPARM attributes if using
2636 GNU C. Test for __i686__ in case GCC ever defines it. If not on
2637 a x86 platform, define REGPARM as nothing.
2639 * sim-endian.h (WITH_HOST_BYTE_ORDER): Test for i686 and __i686__
2642 Wed Aug 7 20:19:55 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2644 * ld-decode.h, ld-decode.c: Rename goto_gen to the more correct
2646 * gen-idecode.c: Ditto.
2648 * gen-idecode.c (print_idecode_table): Comment out check for
2649 switch/table combination until a bug with it is fixed.
2651 * ppc-opcode-goto: New file. Like complex and flat but uses
2652 goto-switch instead of padded-switch for the tables.
2654 * gen-idecode.c (print_goto_switch_name): New function.
2655 (print_goto_switch_table_leaf): New function.
2656 (print_goto_switch_break): New function.
2657 (print_goto_switch_table): New function. Prints a jump table
2658 that can be jumped into instead of a switch statement.
2660 * gen-idecode.c (*switch_*): As an option output a switch that is
2661 implemented using a jump table but only if the switch is not
2664 Tue Aug 6 09:28:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2666 * configure.in (--enable-sim-{hardware,packages}): Fix typos.
2667 * configure: Regenerate.
2669 * device.c (device_instance_call_method): Fixup format message in
2670 error case. Return 0 in case of error to shut up compiler
2673 Wed Aug 7 00:17:37 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2675 * device_table.c (generic_device_unit_decode): Require a comma
2676 between elements of a unit address.
2678 * device.c (device_tree_print_device): For reg, alternate-reg and
2679 ranges properties use special print functions.
2680 (device_print_ranges_property): Print formatted ranges property.
2681 (device_print_reg_property): Print formatted reg property.
2683 Tue Aug 6 21:35:18 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2685 * device.c (device_tree_add_parsed): For reg, ranges and
2686 alternate-reg properties use a special parser.
2687 (device_tree_parse_reg_property): New function to parse a reg
2689 (device_tree_parse_ranges_property): New function to parse a
2691 (device_encode_unit): Wrapper for encode_unit callback.
2692 (device_decoce_unit): Wrapper for decode_unit callback.
2694 Wed Jul 31 00:02:30 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2696 * device_table.h (device_instance_callbacks): Relace the claim and
2697 release methods with a more general table mapping from method-name
2700 * device.c (device_instance_call_method): New function. Implement
2701 the OpenBoot call-method client interface. Attempts to locate the
2702 instances method in the callback table.
2703 (device_instance_claim, device_instance_release): Delete.
2704 Replaced with call-method and a lookup table.
2706 * emul_chirp.c (chirp_emul_call_method): Use the new device
2707 instance call method and let that handle a client claim call.
2709 * hw_htab.c (claim_memory): Wrapper function to call the memory
2710 devices "claim" method using the new device-instance call-method
2711 interface. Replaces the previous direct calls to claim.
2712 (htab_map_region): Use claim_memory.
2713 (htab_init_data_callback): Ditto.
2715 * hw_memory.c (hw_memory_instance_claim): Update function
2716 interface so that it is compatible with call-method.
2717 (hw_memory_instance_release): Ditto.
2718 (hw_memory_instance_methods): New table of memory specific
2719 methods claim and release. Add to the hw_memory_callback
2722 Tue Jul 30 21:26:14 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2724 * psim.c (psim_init): Back out of change to initial value of
2727 Tue Jul 30 21:12:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2729 * sim_callbacks.h (sim_io_printf_filtered): Replace
2730 printf_filtered with a local simulator specific version. Add
2731 #define printf_filtered to simplify updating of existing code.
2733 * sim_callbacks.h (sim_io_write_stdout, sim_io_read_stdin,
2734 sim_io_write_stderr): New functions. Read / write to the
2735 simulations stdin and stdout and stderr interfaces. Merge in code
2736 from hw_pal that previously handled async I/O.
2737 (sim_io_flush_stdoutput): Rename flush_stdoutput. Add #define
2738 flush_stdoutput to simplify updating of existing code.
2740 * hw_pal.c (scan_hw_pal, write_hw_pal,
2741 hw_pal_instance_write_callback): Use the new sim_io functions.
2743 * main.c: Implement standalone versions of the new sim_io
2744 functions. Include support for async I/O.
2745 * sim_calls.c: Ditto. This time using the gdb callback table.
2747 * std-config.h (CURRENT_STDIO, current_stdio): New macro. Set up
2748 stdio configuration so that it works in the same way as the rest
2750 * psim.c (psim_create): Initialize current_stdio from the device
2752 * emul_generic.c (emul_add_tree_options): Enter a default value
2753 for use-stdio in the device tree.
2755 Fri Jul 26 19:43:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2757 * gen-idecode.c (print_jump): Was always generating a jump back to
2758 idecode. Only necessary at tail of semantic code.
2759 (print_jump): Was always setting the processor's cia, even during
2760 startup when the processor was still undefined.
2761 (print_jump): For safety, restart smp loop when cpu_nr >= nr_cpus,
2764 * options.c (print_options): Add printing of WITH_REGPARM and
2767 * std-config.h (WITH_REGPARM, WITH_STDCALL): Provide default
2768 (disabled) values if not defined.
2770 Fri Jul 26 00:36:35 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2772 * ppc-cache-rules (cache): Change RS and RB to cache instead of
2773 compute. The block move instructions use them.
2775 * idecode_expression.h (FPSCR_SET): New macro, set specific FPSCR
2777 (CR_FIELD): New macro, extract specific CR register.
2778 (FPSCR_FIELD): New macro, extract specific FPSCR register.
2780 * registers.h (GPR): New macro, simplify accesses to GPR[i].
2782 * bits.c (INSERTED): Covert INSERTED macro into a function.
2783 (EXTRACTED): Conditionally compile on correct bit size macro.
2785 * bits.h (BIT8): New macro, set a single bit in an 8 bit byte.
2787 * ppc-instructions: With hints from Paul Martin, type in missing
2788 some instruction semantics. Leave disabled for the moment.
2789 (Load Multiple Word): Ditto.
2790 (Store Multiple Word): Ditto.
2791 (Load String Word Immediate): Ditto.
2792 (Load String Word Indexed): Ditto.
2793 (Store String Word Immedate): Ditto.
2794 (Store String Word Indexed): Ditto.
2795 (Move to Condition Register from XER): Ditto.
2796 (Move From Condition Register): Ditto.
2797 (Move From FPSCR): Ditto.
2798 (Move to Condition Register from FPSCR): Ditto.
2799 (Move To FPSCR Field Immediate): Ditto.
2800 (Move To FPSCR Fields): Ditto.
2801 (Move To FPSCR Bit 0): Ditto.
2802 (Move To FPSCR Bit 1): Ditto.
2804 Thu Jul 25 22:10:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2806 * std-config.h (SEMANTICS_INLINE): By default, mask out the
2807 inlining of semantic functions from DEFAULT_INLINE. Almost all
2808 configurations call the semantic code via a pointer so there is
2811 * std-config.h (ICACHE_INLINE): Ditto.
2813 Thu Jul 25 20:07:30 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2815 * configure.in (sim_regparm): Add configuration option for
2816 enabling GCC's regparm attribute.
2817 * (sim_stdcall): Add configuration option for enabling GCC's
2820 * Makefile.in (REGPARM_CFLAGS): Pass regparam configuration onto
2822 * (STDCALL_CFLAGS): Pass stdcall configuration onto compilations.
2824 * std-config.h (REGPARM): Extend construction of REGPARM macro so
2825 that it can include __stdcall__ function attribute.
2827 Wed Jul 24 19:04:20 1996 Andrew Cagney <cagney@sawnoff>
2829 * options.c (print_options): Include SUPPORT_INLINE in information
2832 * gen-idecode.c (print_run_until_stop_body): Only generate loop
2833 termination test if creating idecode_run_until_stop. Push the
2834 loop termination test back into each alternative branch.
2836 Wed Jul 24 15:47:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2838 * gen-icache.c (print_icache_function): Have the cache function
2839 always update the cache_entries semantic and address fields.
2841 * gen-idecode.c (print_idecode_switch_illegal): Include a break
2842 when generating illegal instructions. This was commented out
2843 which is a hangover from looking a at switch statements generated
2844 using indirect jumps.
2846 Tue Jul 23 20:57:01 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2848 * igen.c (print_my_defines): Replaces print_define_my_index.
2849 Print both a definition for MY_INDEX and MY_PREFIX.
2850 * gen-icache.c (print_icache_function): Adjust.
2851 * gen-idecode.c (print_jump_insn): Adjust.
2852 * gen-semantics.c (print_c_semantic): Adjust.
2854 * gen-support.c (gen_support_h): Add optional include to created
2855 support.h so that, like cpu, it is optionally inlined for all
2856 modules that include it.
2857 * inline.h, inline.c: Adjust so that support.[hc] is handled the
2860 * idecode_fields.h (LABEL, GOTO): Macro's that create a unique
2861 name for a lable and then branch to it.
2863 * ppc-instructions (convert_to_integer, Floating Round to
2864 Single-Precision, Floating Convert from Integer Doubleword): Use
2865 LABEL and GOTO instead of the recently added switch statements.
2867 Wed Jul 24 14:02:42 1996 Andrew Cagney <cagney@sawnoff.highland.com.au>
2869 * gen-idecode.c (print_run_until_stop_body): Too many rparen in
2872 Tue Jul 23 20:57:01 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2874 * configure.in (--enable-sim-line-nr): Typo - sim_line-nr.
2875 * (--enable-sim-inline): Reorder patern matching of arguments so
2876 that SUPPORT=ALL_INLINE is reconized as *=* and not *_INLINE.
2878 * configure: rebuild.
2880 Mon Jul 22 23:25:08 1996 Andrew Cagney <cagney@highland.com.au>
2882 * configure.in (--enable-sim-hardware, --enable-sim-packages): New
2883 configuration options. Let the user specify the packages or
2884 hardware devices that are to be included in the build. Makes it
2885 possible for user packages to be specified.
2887 * Makefile.in (tmp-pk, tmp-hw): Just use the list of packages and
2888 hardware instead of checking it using ls. configure.in should
2889 have taken care of any problems.
2890 (HW_SRC, HW_OBJ, PACKAGE_SRC, PACKAGE_OBJ): Set by configure.
2892 Mon Jul 22 22:38:59 1996 Andrew Cagney <cagney@highland.com.au>
2894 * psim.c (psim_options): Enter the argument to the memory size
2895 option directly into the device tree. Was using atol() which is
2896 dangerously non portable.
2898 Mon Jul 22 22:17:08 1996 Andrew Cagney <cagney@highland.com.au>
2900 * configure.in (icache): Extend icache flag to include an insn
2901 option. If specifyed the insn - aka instruction - is included in
2902 the instruction cache. Make this the default.
2903 * configure: re-generate.
2905 * igen.c (main), igen.h: Add option -S - inSn - for specifying
2906 that the instruction should be included in the icache.
2908 * gen-icache.c (print_icache_body): If enabled, output code to put
2909 the instruction into the icache.
2910 (print_icache_struct): If enabled, add insn to the icache struct.
2912 Mon Jul 22 20:46:12 1996 Andrew Cagney <cagney@highland.com.au>
2914 * Makefile.in (BUILD_CFLAGS): Include -g when building the
2917 Mon Jul 22 20:00:25 1996 Andrew Cagney <cagney@highland.com.au>
2919 * emul_generic.c (emul_add_tree_options): Was incorrectly setting
2920 the strict-alignment option when hardwired for non-strict
2923 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2925 * gen-semantics.c: Make the my_index variable a macro MY_INDEX.
2927 * ppc-instructions: Adjust so that references are to MY_INDEX and
2930 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2932 * gen-idecode.c: Output the complete run_until_stop function
2933 instead of just the code to handle a single instruction issue.
2934 * : Have the generated idecode.c include inline.c (instead of psim.c).
2936 * std-config.h: Change psim.c so that it isn't inlined (as this is
2939 * psim.c (run_until_stop): Delete the old run_until_stop function
2940 instead calling the idecode_run and idecode_run_until_stop
2941 functions that gen-idecode.c is now creating.
2943 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2945 * dgen.c: Maintenance - update to use new features found in lf.c.
2947 * filter_filename.c (filter_filename): Maintenance - make the
2950 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2952 * debug.c (TRACE, ITRACE, DTRACE): Have GCC instead of CPP
2953 eliminate trace statements.
2955 * debug.c: Change trace format so that it is consistent
2956 (file:line-nr) with CC's error output.
2958 * gen-itable.c (itable_c_insn): Add the source file name and
2959 source line number to the instruction's informational entry.
2961 * debug.c (ITRACE): Use the itable (and my_index) to get the
2962 current instructions name and source line number.
2964 * gen-semantics.c, gen-icache.c: Adjust generated ITRACE calls to
2965 match new interface.
2967 * emul_bugapi.c (emul_bugapi_instruction_call): Adjust
2968 corresponding call to ITRACE so that it still matches.
2970 * idecode_expression.h (ALU_END, CR0_COMPARE): Use TRACE instead
2971 of ITRACE. The CPP line directives would have previously set the
2972 line-nr and file name so ITRACE isn't needed.
2974 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2976 * gen-idecode.c (print_jump_until_stop_body): New function and
2977 idecode generation option. Instead of generating and calling
2978 separate functions containing the semantic and icache code
2979 generate a single monolythic function and use goto's (and GCC's
2980 indirect jump) to move between code blocks.
2982 * Makefile.in: Add sim_jump flag to those passed to igen.
2984 * configure.in: New option --enable-sim-jump (default disabled)
2986 * ppc-instructions: Eliminate any uses of labels and goto's.
2987 These result in duplicate declarations when a single flat function
2990 * ppc-opcode-jump: New file. Set of opcode rules useful when
2991 testing jumping idecodes.
2993 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
2995 * gen-idecode.c: Optionally include the semantic code for an
2996 instruction in the function that is doing the decoding.
2998 * igen.c: Add option (-C) to generate semantics in the instruction
3001 * configure.in (--enable-sim-icache): Accept an option list such
3002 as 1024,define. Add a new choice to the list - semantic - which
3003 will cause igen to generate instruction decode functions that
3004 include the corresponding semantic code.
3006 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3008 * configure.in: New option --enable-sim-line-nr (default enabled).
3009 Enable/disable the inclusion of CPP line directives in the
3010 generated files. Such directives refer back to the source files
3011 used when generating the simulator code.
3013 * Makefile.in (sim_line_nr): Pass to igen.
3015 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3017 * igen.c (main): Revamp the options so that more letters are
3020 * configure.in: Adjust to match igen's revamped options
3022 Sun Jul 21 21:18:05 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3024 * Makefile.in (pk.h, hw.h): Rewrite depenencies for hw.h (etc) so
3025 that they use the same technique as igen (ie a dummy targets
3026 tmp-pk and tmp-hw are created).
3028 Mon Jun 24 22:28:00 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3030 * Makefile.in (BUILD_CFLAGS): Include WARNING_CFLAGS.
3032 Wed Jun 19 21:45:28 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3034 * ld-cache.[hc], ld-decode.[hc], ld-insn.[hc]: New files. Separate
3035 out the loading of each of the tables from the rest of igen.
3036 * Makefile.in: Adjust.
3039 * gen-icache.[hc], gen-idecode.[hc], gen-itable.[hc],
3040 gen-model.[hc], gen-semantics.[hc]: New files. Separate out the
3041 code creating each separate set of generated files.
3042 * Makefile.in: Adjust.
3045 * gen-support.[ch]: New files. Output the support functions (found
3046 in the ppc-instructions file) into a separate file.
3048 * inline.h, inline.c: Add.
3049 * std-config.h: Add.
3051 * ld-cache.c: Re-design the cache table format.
3052 * ppc-cache-rules: Update to new format.
3054 * ld-decode.c: Re-design the decode table format.
3055 * ppc-opcode-simple: Update to new format
3056 * ppc-opcode-complex: Ditto
3057 * ppc-opcode-flat: Ditto
3059 * filter.h, filter.c: New files. Separate the opcode filter table
3060 reading code from the rest of igen.c. Re-design the filter so that
3061 it works inclusivly not exclusivly.
3062 * igen.c: Remove the opcode filter table loading code.
3063 * Makefile.in (filter.o): Adjust
3064 * configure.in: Adjust filter flag so that default includes 32bit
3066 * ppc-instructions: Clean up filter fields so that only in use
3067 entries are specified (ie delete `be').
3069 * misc.c (name2i, i2name): New function. Map between a string and
3072 Mon Jun 17 20:08:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3074 * sim_calls.c (sim_close): If simulator not created, skip printing
3077 Mon Jun 17 20:08:03 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3079 * registers.c (register_description): Typo, insns not insn.
3081 * ppc-instructions (model_get_number_of_stalls): New model function,
3082 returns number of stalls for the specified processor.
3083 * psim.c (psim_read_register): Add call to new function
3084 model_get_number_of_stalls().
3086 * ppc-instructions (model_get_number_of_cycles): New model function,
3087 returns number of stalls for the specified processor.
3088 * psim.c (psim_read_register): Add call to new function
3089 model_get_number_of_cycles().
3091 Fri Jun 14 00:11:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3093 * device_table.h: Don't pass the parent device into a devices
3094 create function. This makes the create function consistent with
3096 * device.c (device_template_create_device): Ditto
3097 * hw_pal.c (hw_pal_create): Ditto
3098 * hw_core.c (hw_core_create): Ditto
3099 * hw_vm.c (hw_vm_create): Ditto
3100 * hw_disk.c (hw_disk_create): Ditto
3101 * hw_nvram.c (hw_nvram_create): Ditto
3102 * hw_memory.c (hw_memory_create): Ditto
3103 * hw_cpu.c (hw_cpu_create): Ditto.
3105 * device.c (split_find_device): Allow a null initial parent device.
3106 (device_template_create_device): Ditto.
3108 * device.c (device_create_from): Make local (static) only used
3110 * device_table.h: typedef device_callbacks moved here (from
3111 device.h) where it belongs.
3113 * hw_core.c: New file. Implements just the core device using the
3116 * corefile.c: Moved all core device functions into the new
3117 hw_core.c file. core_device_create() disapears.
3119 * psim.c (psim_tree): Use device_tree_add_parsed() to create the
3122 Thu Jun 13 00:09:29 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3124 * hw_init.c: Correct typo in comment.
3126 * corefile.c (core_init): Remove any remaining references to a
3128 (core_map_find_mapping): Ditto.
3130 Wed Jun 12 22:30:32 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3132 * corefile.c (core_init): Make function global so that other
3133 devices are able to use the full core object.
3135 * corefile.c (core_create, core_from_device): Break core_create
3136 into two functions. The first creates a core object, the second
3137 returns the core object associated with a core device.
3139 * corefile.c (core_device_create): Use core_create to make the
3142 * psim.c (psim_create): Use core_from_device() instead of
3145 * device.c (device_template_create_device): Make static as only
3146 needed by functions internal to device.c.
3148 Fri Jun 7 23:47:18 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3150 * ppc-opcode-test-2: Remove description of fields.
3151 * ppc-opcode-complex: Ditto
3152 * ppc-opcode-flat: Ditto
3153 * ppc-opcode-simple: Ditto
3154 * ppc-opcode-stupid: Ditto
3155 * ppc-opcode-test-1: Ditto
3156 * ppc-cache-rules: Ditto
3158 * igen.c: Add description of files as a comment at the front.
3160 Wed Jun 26 12:50:33 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3162 * configure.in: Check for whether the termios and termio
3163 structures are really defined, and whether or not, they define the
3165 * configure: Regenerate.
3167 * Makefile.in ({,TERMIO_}CFLAGS): Add TERMIO_CFLAGS options set by
3170 * emul_unix.c: Various changes to allow for building on systems
3171 with different termio and termios structures. If host has both
3172 termio and termios, just use termios. No longer include
3175 Wed Jun 26 12:26:55 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3177 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
3178 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
3180 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3181 (AC_PROG_INSTALL): Added.
3182 * configure: Rebuilt.
3184 Wed Jun 5 23:53:42 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3186 * corefile.h: Rewrite documentation so that it can be extracted and
3187 converted into texinfo (and hence ready for translation into html,
3191 Thu Jun 6 09:52:37 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3193 * hw_disk.c (SEEK_SET): If SEEK_SET is not defined, define as 0.
3195 Wed Jun 5 11:46:52 1996 Andrew Cagney <cagney@puddin>
3197 * hw_disk.c: Include <unistd.h> if available. Under SunOS, that
3198 is the source of SEEK_SET.
3200 Wed Jun 5 01:39:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3202 * psim.c (psim_options): Correct type of dummy arguments being
3203 passed to a device_ioctl call.
3205 * hw_init.c (hw_data_init_data_callback): Adjust printf arguments.
3206 (write_stack_arguments): Ditto.
3207 * hw_trace.c: Instance callback entry no longer a table.
3209 Wed Jun 5 01:39:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3211 * emul_unix.c (do_unix_umask): Cast printf argument.
3212 (convert_to_linux_termios): Use LINUX_VSWTC not LINUX_VSWCH
3214 Mon Jun 3 15:02:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3216 * hw_init.c (update_for_binary_section): Abort if we find an
3217 .interp section, which indicates the need for shared libraries to
3220 Mon Jun 3 15:02:04 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3222 * emul_unix.c (do_unix_{time,gettimeofday,getrusage}): Add support
3223 for time, gettimeofday, and getrusage system calls.
3224 ({solaris,linux}_descriptors): Add new system calls.
3225 (do_get{,e}{uid,gid}): Use gid_t/uid_t types.
3226 (do_get{,p}pid): Use pic_t types.
3228 * configure.in (AC_TYPE_{GETGROUPS,SIGNAL}): Define.
3229 (AC_TYPE_{MODE,OFF,PID,SIZE,UID}_T): Define.
3230 * config{.in,ure}: Regenerate.
3232 Mon Jun 3 23:19:57 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3234 * emul_netbsd.c (emul_netbsd_create): Use the more specific names
3235 `ppc-elf' and `ppc-xcoff' for the stack-type.
3236 * emul_unix.c (emul_unix_create): Ditto.
3237 * emul_bugapi.c (emul_bugapi_create): Ditto.
3238 * hw_init.c: Reconize the new names.
3240 * emul_unix.c (do_unix_break): Adjust so that the updated ioctl
3241 call is used (no system parameter).
3243 Sun Jun 2 11:21:17 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3245 * emul_unix.{h,c}: New files to provide Solaris and Linux system
3248 * Makefile.in (LIB_{SRC,OBJ}): Add emul_unix.{c,o}.
3249 (os_emul.o): Depend on emul_unix.h.
3250 (emul_unix.o): New dependency.
3252 * configure.in (--enable-sim-alignment): Add 0|default to mean set
3253 alignment to 0, which means use appropriate alignment for mode.
3254 (AC_CHECK_FUNCS): Add new functions needed by emul_unix.c.
3255 (AC_CHECK_HEADERS): Add new include files needed by emul_unix.c.
3256 * config.in: Regenerate.
3257 * configure: Regenerate.
3259 * emul_generic.c (emul_write2_status): New function to return
3260 results in r3 and r4 for Solaris system calls.
3261 (emul_do_system_call): If the system call is not support, but
3262 there is a string for the system call name, print out the string
3263 instead of the system call number.
3265 * emul_generic.h (emul_write2_status): Declare it.
3267 * emul_netbsd.c: Use /* */ around comment on #endif.
3269 * os_emul.c: Include emul_unix.h.
3270 (os_emulations): Add emulations for Solaris, and Linux.
3272 * psim.c (psim_usage): Add message about solaris, linux
3275 Thu May 30 00:00:10 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3277 * hw_iobus.c: Tidy up notes so that they can be auto-extracted.
3279 * README: Correct PSIM's title
3281 Wed May 29 23:50:26 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3283 * basics.h: New global type object_disposition, used to indicate
3284 the status of objects when things are restarted.
3286 Fri May 17 17:28:52 1996 Andrew Cagney <cagney@benjimen.highland.com.au>
3288 * device_table.h: Change the interrupt descriptor structure so
3289 that it includes an additional member - an upper bound on the
3290 interrupts by that name.
3292 * device.c (device_interrupt_decode): Allow a range of interrupt
3293 ports (eg rst0 .. rst6) if the port descriptors bound is non zero.
3295 * device.c (device_tree_print_device): Include a list of valid
3296 interrupt ports when listing supported devices.
3298 * device.h, device.c (device_child_interrupt_*): Delete. Not used.
3300 * emul_generic.c (emul_add_tree_hardware): Modify the creation of
3301 the interrupt net so that it uses int0 .. intN.
3303 Tue May 14 23:03:53 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3305 * device.h, device.c (device_ioctl): Drop the system argument.
3306 Devices can not obtain this using the device_system() call.
3307 * device_table.h: Adjust accordingly.
3308 * hw_*.c: Adjust accordingly.
3309 * emul_netbsd.c (do_break): Adjust call to vm device accordingly.
3310 * psim.c (psim_options): Use a device_ioctl call to force the
3311 hw_trace device to update the trace options.
3312 * hw_trace.c: Replace the init function with an ioctl call. Adjust
3315 * psim.c (psim_init): Re-order initialization so that the
3316 os-emulation is initialized after the device tree. Without this,
3317 os-emul's are not able to create instances or access properties
3318 that contain an instance handle.
3320 * device.h, device.c (device_add_*_property): Make these functions
3321 internal to device.c. The user has access to the more generic
3322 device_tree_add_parsed function. Differentiate between the initial
3323 and current value for each property.
3324 * (clean_device_properties): New function that deletes any
3325 properties created after the start of a simulation and restores
3326 the initial value of any others (ignoring ihandles).
3327 * (init_device_properties): (Re)Initialize any properties that
3328 contain ihandles. create
3330 * (device_tree_init): Include calls to clean the device tree's
3331 properties and then initialize them. Document this in the device.h
3334 Mon May 6 17:36:15 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3336 * interrupts.c (decrementer_interrupt): Always pend a decrementer
3337 interrupt even if it is not yet possible to deliver it.
3339 Wed May 1 12:26:51 1996 Andrew Cagney <cagney@benjimen>
3341 * mon.h, mon.c (mon_get_number_of_insns): Make this externally
3342 visable adjusting the arguments so that the interface is correct.
3343 (mon_print_info): Adjust calls.
3345 * registers.h, registers.c (register_description): Add phony
3346 cycle, insn and stall registers.
3348 * psim.c (psim_read_register): Return nr of instructions for given
3351 Tue Apr 30 22:09:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3353 * hw_htab.c: New file. Extract contents from disk_table.c.
3354 Contains a device that, during initialization will create a
3355 PowerPC htab in memory.
3356 * hw_register.c: New file. Extract contents from disk_table.c.
3357 Contains a device that, during initialization, will parse its
3358 property list and use that to initialize various processor
3359 registers (not target specific).
3360 * hw_vm.c: New file. Extract contents from disk_table.c. Contains
3361 a device that handles accesses to invalid virtual memory addresses
3363 * hw_init.c: New file. Extract contents from disk_table.c. Misc
3364 devices that can initialize memory from a file.
3365 * hw_trace.c: New file. Extract contents from disk_table.c.
3366 Configure trace options from property values.
3368 * Makefile.in (hw_htab.o, hw_register.o, hw_vm.o, hw_init.o,
3369 hw_trace.c): Add new device files.
3371 * device_table.c: Remove above code, now in separate independant
3374 Fri Apr 26 00:00:07 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3376 * hw_disk.c: New file. Disk and CDROM device.
3378 * Makefile.in (hw_disk.o): Add device hw_disk.c.
3380 * pk_disklabel.c: New file. Implement the miss-named disk-label
3383 * Makefile.in (pk.h): Create the file pk.h that contains a list of all
3386 * Makefile.in (hw.h, hw.c): Add dependancy on Makefile so that
3387 they are re-created when the makefile is updated.
3389 * emul_generic.c (emul_add_tree_hardware): Add a disk device
3390 (below the iobus) to the device tree. Include an ihandle of
3391 the disk as /chosen/disk.
3393 * emul_bugapi.c (emul_bugapi_create): Don't initialize the input,
3394 output and (new) disk handles yet.
3395 * (emul_bugapi_init): Initialize the input, output (and just added)
3397 * (emul_bugapi_do_diskio): New. Performs disk i/o (well at least
3398 what I think the behavour is).
3399 * emul_bugapi.c (emul_bugapi_instruction_call): Add hook to disk
3400 i/o bug call. For RETURN call, exit using gpr[3]'s status even
3401 though this isn't part of the spec - makes it possible for machine
3402 code to signal the aporting of a simulation run.
3404 * emul_chirp.c (chirp_emul_call_method): Add support for the
3405 claim/release methods.
3406 * (chirp_emul_exit): Add an optional exit status argument to
3407 the exit method. Makes it possible for chirp emul simulations
3408 to abort upon an error.
3409 * device.h, device.c (device_instance_claim,
3410 device_instance_release): New methods for claiming and releasing
3412 * hw_memory.c: add claim and release memory methods.
3413 * hw_*: Use the claim memory method when allocating physical
3416 Thu Apr 18 23:38:10 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3418 * hw_nvram.c (hw_nvram_update_clock): Use the current not previous
3419 time when updating the clock.
3421 * hw_nvram.c: Tidy up documentation
3423 Fri May 24 10:08:10 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3425 * configure.in (AC_STRUCT_ST_{BLKSIZE,BLOCKS,RDEV}): Use these
3426 macros to determine whether or not the appropriate st_<xxx> fields
3427 exist in the stat structure.
3428 (AC_CHECK_FUNCS): Check for all unix system calls used, except for
3429 the real basic ones like open, read, write, etc.
3430 * config{.in,ure}: Regenerate.
3432 * emul_netbsd.c: Add support for missing system calls, and/or
3433 missing stat fields.
3434 (MAXPATHLEN): Undefine if including unistd.h, since sys/param.h
3437 * hw_pal.c (WITH_STDIO): Redefine if O_NDELAY, F_GETFL, or F_SETFL
3439 (scan_hw_pal): Do not cause syntax error if O_NDELAY, F_GETFL, or
3440 F_SETFL not defined.
3442 Tue May 21 17:24:45 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3444 * emul_netbsd.c (write_stat): Don't convert st_blocks unless the
3447 Thu May 16 10:56:45 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3449 * configure.in (AC_CHECK_HEADERS): Add sys/ioctl.h.
3450 * config{.in,ure}: Regenerate.
3451 * emul_netbsd.c: If HAVE_SYS_IOCTL_H is not defined, don't include
3454 Tue May 7 17:28:12 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3456 * hw_pal.c (hw_pal_instance_read_callback): Remove unused
3459 * misc.c ({,target_}a2i): Rewrite to not use strtoul.
3461 * Makefile.in ({spreg,misc}.o): Add dependency on .c file.
3462 ({i,d}gen): Don't link in liberity. Use BUILD_LIBS instead of
3465 Mon May 6 11:31:43 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3467 * hw_pal.c (hw_pal_instance_read_callback): If using stdio, use
3468 fgets to read line. If not using stdio, do a simple blocking read
3471 Fri May 3 15:07:42 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3473 * Makefile.in: Correctly build simulator for build machine != host
3476 Tue Apr 30 18:46:05 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3478 * configure.in (--enable-hostendian): Rework so the default uses
3479 the AC_C_BIGENDIAN results. Only run AC_C_BIGENDIAN if not cross
3481 * configure: Regenerate.
3483 * sim-endian.h: Add more tests for host endian to support more
3484 platforms in a cross compilation environment.
3486 Wed Apr 17 14:38:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3488 * hw_pal.c ({scan,write}_hw_pal): If WITH_STDIO == DO_USE_STDIO,
3489 use stdio, instead of unpended read/printf_filtered.
3490 (hw_pal_instance_write_callback): If WITH_STDIO == DO_USE_STDIO,
3491 flush stdout after writing the characters.
3493 * options.c (print_options): Print out WITH_STDIO.
3495 * Makefile.in (STDIO_CFLAGS): Pass on result of @sim_stdio@
3496 configuration variable.
3497 (CONFIG_CFLAGS): Include STDIO_CFLAGS.
3498 (hw.{c,h}): Allow for source dir != build dir, and for HW_SRC
3499 files to contain directory pieces.
3501 * std-config.h (DO{,NT}_USE_STDIO): New flags for whether we
3502 should use stdio for console input.
3503 (WITH_STDIO): If not defined, define as DONT_USE_STDIO.
3505 * configure.in (--enable-sim-stdio): Add new switch to control
3506 whether stdio is used for console I/O.
3507 * configure: Regenerate.
3509 * interrupts.c (external_interrupt): Declare it to be
3510 INLINE_INTERRUPTS, not INLINE_CPU.
3512 Mon Apr 15 23:30:56 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3514 * events.c (insert_event_entry): Allow events to be scheduled
3515 *NOW* (at delta time 0). Add assertions to clarify behavour of
3518 * events.c (update_time_from_event): New function. Calculates the
3519 number of ticks from the next event. Use this.
3521 Sun Apr 14 21:39:45 1996 Andrew Cagney <cagney@highland.com.au>
3523 * emul_netbsd.c (do_break): Return 0 if success (instead of
3526 * device_table.c (vm_ioctl_callback): Don't return adjusted break
3529 Sun Apr 14 21:32:41 1996 Andrew Cagney <cagney@highland.com.au>
3531 * device_table.h: Change type of the device ioctl so that it
3532 returns an int (status).
3533 * device.h (device_ioctl): Ditto.
3534 * device.c (device_ioctl): Ditto.
3536 * device_table.c (stack_ioctl_callback): Return 0 status.
3537 (vm_ioctl_callback): Ditto
3539 Sat Apr 13 00:00:24 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3541 * emul_netbsd.c (do_read): Correctly set the return value.
3544 (do_geteuid): Ditto.
3546 (do_getegid): Ditto.
3548 (do_sigprocmask): Ditto.
3551 (do_gettimeofday): Ditto.
3552 (do_getrusage): Ditto.
3556 (do___sysctl): Ditto.
3558 Fri Apr 12 20:56:47 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3560 * device_table.c (vm_ioctl_callback): Don't access the processor
3561 registers directly, instead leave it to the caller to handle this.
3563 * emul_netbsd.c (do_break): Which calls vm_ioctl_callback to
3564 perform a break. Pass in the new break value and set the
3565 registers according to the result.
3567 * emul_generic.c (emul_write_status): Change so that r3 contains
3568 either status or errno and failure is indicated by SO.
3570 Thu Apr 4 23:03:38 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3572 * emul_bugapi.c (emul_bugapi_create): More strict check of OEA
3575 Thu Apr 4 20:58:05 1996 Andrew Cagney <cagney@highland.com.au>
3577 * interrupts.h (interrupts): New structure contains state of
3580 * cpu.c (cpu_interrupts): New function. Pending interrupt status
3581 in the cpu and grant access to it. Add interrupts to cpu
3584 Fri Mar 29 22:09:25 1996 Andrew Cagney <cagney@highland.com.au>
3586 * device.c (device_tree_add_parsed): Check that the creation of a
3587 device instance worked before using it.
3589 * psim.c (psim_halt): Remove cia argument from psim_halt. This
3590 function does not save the CIA so do not pass it in.
3592 Fri Mar 29 21:30:56 1996 Andrew Cagney <cagney@highland.com.au>
3594 * hw_pal.c (hw_pal): Merge the halt and icu and console devices
3595 found in device_table.c into a single hack pal.
3597 * device_table.c (halt, icu, console): Delete.
3599 * Makefile.in (hw_pal.o): New dependency.
3601 * emul_generic.c (emul_add_tree_hardware): Re-arange device tree
3602 so that it uses the pal instead of the icu/halt/console devices.
3603 Wire the pal's interrupt ports up to the cpu nodes.
3605 Fri Mar 29 20:17:17 1996 Andrew Cagney <cagney@highland.com.au>
3607 * hw_iobus.c (hw_iobus_attach_address_callback): Move from
3608 device_table.c to here.
3610 * Makefile.in (hw_iobus.o): New dependency.
3612 Fri Mar 29 12:17:58 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3614 * emul_bugapi.c (_os_emul_data): Add fields for output, input.
3615 (emul_bugapi_create): Create input, output from /chosen/stdin and
3617 (emul_bugapi_do_{read,write}): Switch to use device_instance
3619 (emul_bugapi_instruction_call): Change calls to
3620 emul_bugapi_do_{read,write} to pass device instance argument.
3622 Tue Mar 26 14:57:58 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3624 * igen.c (idecode_switch_end): Fix 2/26 change so that an extra
3625 default is not written out if a default was already written.
3627 * psim.c (psim_{read,write}_register): Use sizeof unsigned_8 to
3628 size cooked_buf, not sizeof natural_word, since floating point
3629 registers are 8 bytes.
3631 Mon Mar 25 22:07:13 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3633 * configure: Regenerate with autoconf 2.9.
3635 Thu Mar 21 00:14:26 1996 Andrew Cagney <cagney@highland.com.au>
3637 * device_table.h: Always include string headers.
3639 Thu Mar 21 00:06:09 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3641 * main.c (error): Be careful to not try to print out statistics
3642 when the simulation was never created.
3644 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
3646 * basics.h: Move the event queue's definition to here so that it
3647 can be refered to globally with out importing all of events.h.
3649 * psim.h, psim.c (psim_event_queue): New function. Grant access
3650 to the simulation event queue. Will make this the single point of
3651 access (there is after all only one event queue in the
3654 * cpu.c (cpu_create): Use psim_event_queue to obtain the event
3655 queue instead of it being passed in. No longer allow access to
3656 the cpu's copy of the event queue.
3658 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
3660 * events.h, events.c (event_handler): Remove event_queue from
3661 arguments passed to an event handler. That argument is redundant
3662 - the `data' should refer to a data structure that contains the
3663 event queue if queing is needed.
3665 * cpu.c (cpu_decrement_event): adjust
3667 * events.c (event_queue_process): adjust
3669 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
3671 * device.h, device.c (device_system): New, returns a handle for
3672 the system given the device.
3674 * device.c (device_address_init): Store a pointer back to the
3675 system in each devices node.
3677 * device_table.h: Don't pass `system' into each device when it is
3678 being initialized, this is now available using device_system(me).
3680 * device.c (device_address_init, device_data_init): Adjust.
3682 * hw_cpu.c, hw_nvram.c, hw_memory.c, hw_eeprom.c, device_table.c:
3685 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
3687 * interrupts.c (decrementer_interrupt, external_interrupt):
3688 Remember that an interrupt wasn't delivered so that it can be
3691 * interrupts.c (check_masked_interrupt): New function. (re)
3692 checks for the posibility that a recent change to the MSR may have
3693 made it possible to deliver an interrupt that was previously
3694 masked be the EE bit.
3696 * ppc-instructions (mtmsr, mfmsr, rfi): Check for posibility of
3697 a pending interrupt being delivered using check_masked_interrupt().
3699 * cpu.c (cpu_decrement_event): Just call decrementer_interrupt()
3700 leaving it to that module to handle both interrupt synchronization
3703 * cpu.c (struct _cpu): remove variables that were going to record
3704 pending decrementer and external interrupts.
3706 Sun Mar 17 22:40:57 1996 Andrew Cagney <cagney@highland.com.au>
3708 * hw_cpu.c, hw_cpu.h: New files. Implement a device that sits
3709 between the interrupt controller and the simulators internal
3710 processor model. Maps device interrupts onto the processor
3711 interrupt function calls.
3713 Mon Mar 4 06:06:54 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3715 * hw_nvram.c: NVRAM device that includes a real-time clock that is
3716 updated each second.
3718 Mon Mar 4 04:18:50 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3720 * device.h (attach_type): Remove attach_default type address
3721 spaces. Will replace with levels of callback memory.
3723 * corefile.h, corefile.c (new_core_mapping), corefile.c
3724 (core_map_attach): Replace default attach with a layerd callback
3727 Sun Mar 3 03:58:46 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3729 * device.c (split_property_specifier): ensure that only a single
3731 (split_value): New function, parses the value part of a device
3734 * device.c (device_tree_add_parsed): Use the interrupt conversion
3735 functions to determine the interrupt port numbers.
3737 * device_table.h: Add table that maps between an interrupts
3738 symbolic name and its port number.
3740 * device.h, device.c (device_interrupt_decode,
3741 device_interrupt_encode): new functions use the recently added
3742 interrupt port name/number tables to perform conversion.
3744 Sun Mar 3 03:23:59 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3746 * device.h, device.c (device_set_array_property,
3747 device_set_boolean_property, device_set_ihandle_property,
3748 device_set_integer_property, device_set_string_property): New
3749 functions - allow the value of a given property to be changed.
3751 * device.h, device.c: Re-order declaration and definition of
3754 Sun Mar 3 03:10:22 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
3756 * device.c (device_tree_print_device, device_tree_add_parsed):
3757 Remove references to phandle properties.
3759 Wed Feb 28 00:43:07 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
3761 * Makefile.in (corefile.o): missing dependency on device_table.h
3764 Tue Feb 27 23:59:35 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
3766 * device_table.h: Revamp device init callbacks so that they are a
3768 * device.c (device_init_data, device_init_address): If an init
3769 callback is NULL assume it should do nothing.
3770 * device_table.c (ignore_device_init, unimp_device_init): delete
3772 * device_table.c, hw_memory.c: adjust.
3776 * (device_instance): ditto.
3778 * (address nee config_address): ditto.
3779 * (interrupt): ditto.
3781 Mon Feb 26 21:11:20 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
3783 * igen.c (idecode_switch_end): Output a default entry when the
3784 switch statement is perfect. Firstly stops GCC complaining about
3785 an incomplete switch and secondly it will be eliminated by a good
3788 Mon Feb 26 22:47:15 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
3790 * Makefile.in (hw.h, hw.c): New targets. Create from the list of
3791 hw_*.c files. hw.h declares a device descriptor table for each hw
3792 device while hw.c lists those tables in a form suitable for the
3793 construction of a top leveltable in device_table.c.
3795 * Makefile.in (device_table.o): now depends on hw.c a generated
3798 * device_table.c (device_table): Re-arange the table of devices so
3799 that two levels are possible. Make use of hw.c.
3800 * device_table.h: ditto.
3802 * device.c (device_template_create_device): Handle new two level
3803 device lookup table.
3804 * device.c (device_usage): ditto.
3806 Mon Feb 26 22:24:00 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
3808 * device_table.c: Delete the memory device (moved to hw_memory.c).
3810 * hw_memory.c: New file. Just an OpenBoot memory device.
3812 Wed Jan 17 21:47:34 1996 Andrew Cagney <cagney@highland.com.au>
3814 * device.c (device_init_address): New. Split initialization into
3815 two stages, address and address spaces
3816 * device.c (device_init_data): New. ... and data or other work.
3817 With out this, devices try to modify memory before it as been
3820 * device.c (device_tree_init): Update to perform staged
3823 * device.c (device_init): Delete.
3825 Wed Jan 17 21:43:09 1996 Andrew Cagney <cagney@highland.com.au>
3827 * device_table.c (data_*): Rewrite to make heaver use of property
3828 nodes. Allow initialization by different data types.
3829 * device_table.c (htab_* pte_*): Rewrite to use properties.
3831 * emul_chirp.c (emul_chirp_create): Use
3832 * emul_bugapi.c (emul_bugapi_create): Ditto
3833 * emul_netbsd.c (emul_netbsd_create): Ditto
3835 Wed Jan 17 21:24:50 1996 Andrew Cagney <cagney@highland.com.au>
3837 * emul_generic.c (emul_add_tree_options): Annotate existing tree
3838 with options that haven't yet been specified.
3839 * emul_generic.c (emul_add_tree_hardware): Annotate existing tree
3840 with demo devices and properties.
3842 * emul_chirp.c (emul_chirp_create): Update to use new
3843 device_tree_add_parsed call and additional information now
3844 included in the device tree. Use emul_add_tree* functions to add
3845 any missing details.
3846 * emul_bugapi.c (emul_bugapi_create): Ditto
3847 * emul_netbsd.c (emul_netbsd_create): Ditto
3849 Wed Jan 17 21:18:27 1996 Andrew Cagney <cagney@highland.com.au>
3851 * device.c (device_instance_create): New. Create/delete and
3852 operate on instances of a device.
3853 * device.c (device_instance_delete): Ditto
3854 * device.c (device_instance_read): Ditto
3855 * device.c (device_instance_write): Ditto
3856 * device.c (device_instance_seek): Ditto
3857 * device.c (device_instance_data): Ditto
3858 * device.c (device_instance_name): Ditto
3859 * device.c (device_instance_path): Ditto
3861 * emul_chirp.c (chirp_emul_open): Implement using device_instance.
3862 * emul_chirp.c (chirp_emul_close): Ditto
3863 * emul_chirp.c (chirp_emul_read): Ditto
3864 * emul_chirp.c (chirp_emul_write): Ditto
3865 * emul_chirp.c (chirp_emul_seek): Ditto
3867 * emul_chirp.c (chirp_read_t2h_args): Read arguments from device.
3868 Being careful to convert all from target to host byte order.
3869 * emul_chirp.c (chirp_write_h2t_args): Converse.
3871 Wed Jan 17 20:07:15 1996 Andrew Cagney <cagney@highland.com.au>
3873 * device.c (device_tree_add_parsed): New. Rewrite code to add
3874 devices to the device tree so that a single printf style function
3877 * device.c (device_tree_add_*): Delete. Replaced by above.
3879 * device.c (split_device_specifier): Functions to manipulate a
3880 device specifier (path) breaking it into its components
3881 * device.c (split_property_specifier): Ditto
3882 * device.c (split_device_name): Ditto
3883 * device.c (split_find_device): Ditto
3885 * device.c (scan_*): Delete
3887 * device.c (device_tree_find_device): Rewrite to use above.
3888 * device.c (device_add_property): Ditto
3890 Wed Jan 17 19:51:56 1996 Andrew Cagney <cagney@highland.com.au>
3892 * psim.c(psim_options): Parse the psim options, installing their
3893 value in the device tree. Options are now first entered into a
3894 device tree and then extracted out again when needed. This allows
3895 greater flexability in configuration.
3897 * psim.c (psim_tree): Returns a basic device tree ready for
3898 parsing by psim_options.
3899 * psim.c (psim_usage): New. Give usage to varing levels of detail
3900 according to the verbosity. In turn output device and trace
3903 * main.c (main): Update to use new system
3904 * sim_calls.c (sim_open, sim_do_command): Ditto
3906 * psim.c (psim_options): Add `r' option - ram size.
3907 * psim.c (psim_options): Add `o' option - openboot tree entry.
3908 * psim.c (psim_options): Add `h'/`H' options - more help.
3910 * debug.c (trace_usage): Add more detailed help.
3911 * device.c (device_usage): New. Output help including a list of
3912 the devices currently available in the device table.
3913 * device_table.c: Add usage operator to each device.
3915 * corefile.c (core_create, core_device_create): Adjust so that the
3916 core device is created earlier for psim_tree(). Core can later be
3919 * psim.c (psim_create): Update to handle above way of creating
3920 things. Extract all information from the device tree.
3922 * device_tree.c (trace_*): New device node, its properties are
3923 used to set the value of the trace options. Init this device (in
3924 psim_options) when ever the options are updated.
3926 Wed Jan 17 19:46:07 1996 Andrew Cagney <cagney@highland.com.au>
3928 * debug.h: Add trace_print_info, trace_print_device_tree and
3929 trace_dump_device_tree. The first is a replacement for the
3930 variable `print_info' found in main.c and sim_calls.c. The latter
3931 two enable the dumping of the entire device tree.
3933 * debug.c: Add to trace_description table.
3935 * main.c (main): Use above trace instead of local variable
3936 * sim_calls.c (sim_close): Ditto
3938 * device.c (device_tree_print_device): New. Prints the device
3939 tree in a format that is consistent with what can be parsed by the
3940 device tree load from file code.
3942 * psim.c (psim_create): Dump device tree if enabled. If nump
3943 selected, exit psim immediatly.
3945 Wed Jan 17 19:36:52 1996 Andrew Cagney <cagney@highland.com.au>
3947 * corefile-n.h (core_map_read_N): When mapping from an address to
3948 a device, do not subtract the devices base. The device its self
3949 can do this. Brings the behavour into line with OpenBoot.
3950 * corefile-n.h (core_map_write_N): Ditto
3951 * corefile.c (core_map_read_buffer): Ditto
3952 * corefile.c (core_map_write_buffer): Ditto
3954 * device_table.c (console_io_read_buffer_callback): Adjust to
3955 handle biased address.
3956 * device_table.c (console_io_write_buffer_callback): Ditto
3958 Wed Jan 17 18:36:09 1996 Andrew Cagney <cagney@highland.com.au>
3960 * device.c (attach_device_interrupt_edge): New. Interrupt model
3961 did not allow interrupts to be wired up as a general net (edges).
3962 Re-implement so that interrupt events can be passed to multiple
3963 controllers and interrupt controllers can further propogate
3966 * device.c (attach_device_interrupt_edge) : New, Ditto
3967 * device.c (detach_device_interrupt_edge) : New, Ditto
3968 * device.c (clean_device_interrupt_edges) : New, Ditto
3969 * device.c (device_interrupt_event) : New, Ditto
3970 * device.c (device_interrupt_attach) : New, Ditto
3971 * device.c (device_interrupt_detach) : New, Ditto
3972 * device.c (device_child_interrupt_attach) : New, Ditto
3973 * device.c (device_child_interrupt_detach) : New, Ditto
3975 * device.c (device_attach_interrupt) : Delete old
3976 * device.c (device_detach_interrupt) : Delete old
3977 * device.c (device_interrupt) : Delete old
3978 * device.c (device_interrupt_ack) : Delete old
3980 * device_table.c (unimp_*) : Update to match
3982 * device_table.c (icu_io_write_buffer_callback) : Update to use
3984 * device_table.c (icu_interrupt_event_callback) : Ditto
3986 Wed Jan 17 18:18:40 1996 Andrew Cagney <cagney@highland.com.au>
3988 * device.c (external_to_device) : New function that provides a
3989 standard mapping between a devices internal representation (a
3990 pointer) and its external (or what is passed to a client)
3991 representation (a phandle). Implement using the cap object
3992 attached to the root node.
3994 * device.c (device_to_external) : Ditto
3995 * device.c (external_to_device_instance) : Ditto but for ihandle
3996 and device instance.
3997 * device.c (device_instance_to_external) : Ditto
3999 * Makefile (device.o): Add dependency on cap.
4001 * emul_chirp.c (struct _emul_chirp_data) : Elimate use of cap. Code
4002 needing to translate between internal and external representations
4003 changed to use the external_to_device et.al. device operations.
4004 * emul_chirp.c (chirp_emul_*) : Ditto
4006 * Makefile (emul_chirp.o): Remove dependency on cap
4008 Sat Jan 6 10:13:26 1996 Andrew Cagney - aka Noid <cagney@highland.com.au>
4010 * emul_chirp.c (map_over_chirp_note): Tighten up (and fix) checks
4011 on OpenBoot note section.
4013 Fri Jan 5 20:28:53 1996 Andrew Cagney <cagney@hignland.com.au>
4015 * emul_generic.c (emul_write_buffer): Use vm faulting byte
4016 read/write calls for buffer transfers. This will cause a fault to
4017 occure if the transfer fails. CHRP catches the fault while the
4018 others suffer the consequences.
4019 (emul_read_buffer): Ditto.
4020 (emul_write_word): Ditto.
4021 (emul_read_word): Ditto.
4022 (emul_read_string): Ditto.
4024 Fri Jan 5 18:55:34 1996 Andrew Cagney <cagney@highland.com.au>
4026 * emul_chirp.c (emul_chirp_create, emul_chirp_instruction_call),
4027 emul_generic (emul_blr_instruction): Use a real blr instruction to
4028 return from a client service call.
4030 * emul_chirp.c (services): Add all OpenBoot services to table.
4032 * emul_generic.h, emul_bugapi.c (emul_bugapi_create), emul_chirp.c
4033 (emul_chirp_create) : Use names instead of numbers for
4034 instructions being stored in memory.
4036 Fri Jan 5 18:52:28 1996 Andrew Cagney <cagney@highland.com.au>
4038 * Makefile.in (maintainer-clean): Remove .log, core and *.core
4039 (From NetBSD) files.
4041 Wed May 29 22:57:40 1996 Andrew Cagney <cagney@kremvax.highland.com.au>
4043 * ChangeLog.00, ChangeLog: ChangeLog from gdb-4.16 becomes