sim: mips: delete TARGET_TX3904 define
[external/binutils.git] / sim / mips / configure.ac
1 dnl Process this file with autoconf to produce a configure script.
2 AC_PREREQ(2.64)dnl
3 AC_INIT(Makefile.in)
4 sinclude(../common/acinclude.m4)
5
6 SIM_AC_COMMON
7
8 dnl Options available in this module
9 SIM_AC_OPTION_INLINE()
10 SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT)
11 SIM_AC_OPTION_HOSTENDIAN
12 SIM_AC_OPTION_WARNINGS
13 SIM_AC_OPTION_RESERVED_BITS(1)
14
15 # DEPRECATED
16 #
17 # Instead of defining a `subtarget' macro, code should be checking
18 # the value of {STATE,CPU}_ARCHITECTURE to identify the architecture
19 # in question.
20 #
21 case "${target}" in
22   mips64vr*-*-*)        SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;
23   mips*tx39*)           SIM_SUBTARGET="-DSUBTARGET_R3900=1";;
24   mips*-sde-elf*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
25   mips*-mti-elf*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
26   mipsisa32*-*-*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
27   mipsisa64*-*-*)       SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
28   *)                    SIM_SUBTARGET="";;
29 esac
30 AC_SUBST(SIM_SUBTARGET)
31
32
33
34 #
35 # Select the byte order of the target
36 #
37 mips_endian=
38 default_endian=
39 case "${target}" in
40   mips64el*-*-*)        mips_endian=LITTLE_ENDIAN ;;
41   mips64vr*el-*-*)      default_endian=LITTLE_ENDIAN ;;
42   mips64*-*-*)          default_endian=BIG_ENDIAN ;;
43   mips16*-*-*)          default_endian=BIG_ENDIAN ;;
44   mipsisa32*-*-*)       default_endian=BIG_ENDIAN ;;
45   mipsisa64*-*-*)       default_endian=BIG_ENDIAN ;;
46   mips*-*-*)            default_endian=BIG_ENDIAN ;;
47   *)                    default_endian=BIG_ENDIAN ;;
48 esac
49 SIM_AC_OPTION_ENDIAN($mips_endian,$default_endian)
50
51
52
53 #
54 # Select the bitsize of the target
55 #
56 mips_addr_bitsize=
57 case "${target}" in
58   mips*-sde-elf*)       mips_bitsize=64 ; mips_msb=63 ;;
59   mips*-mti-elf*)       mips_bitsize=64 ; mips_msb=63 ;;
60   mips64*-*-*)          mips_bitsize=64 ; mips_msb=63 ;;
61   mips16*-*-*)          mips_bitsize=64 ; mips_msb=63 ;;
62   mipsisa32*-*-*)       mips_bitsize=32 ; mips_msb=31 ;;
63   mipsisa64*-*-*)       mips_bitsize=64 ; mips_msb=63 ;;
64   mips*-*-*)            mips_bitsize=32 ; mips_msb=31 ;;
65   *)                    mips_bitsize=64 ; mips_msb=63 ;;
66 esac
67 SIM_AC_OPTION_BITSIZE($mips_bitsize,$mips_msb,$mips_addr_bitsize)
68
69
70
71 #
72 # Select the floating hardware support of the target
73 #
74 mips_fpu=HARDWARE_FLOATING_POINT
75 mips_fpu_bitsize=
76 case "${target}" in
77   mips*tx39*)           mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
78   mips*-sde-elf*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
79   mips*-mti-elf*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
80   mips64*-*-*)          mips_fpu=HARD_FLOATING_POINT ;;
81   mips16*-*-*)          mips_fpu=HARD_FLOATING_POINT ;;
82   mipsisa32*-*-*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
83   mipsisa64*-*-*)       mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
84   mips*-*-*)            mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
85   *)                    mips_fpu=HARD_FLOATING_POINT ;;
86 esac
87 SIM_AC_OPTION_FLOAT($mips_fpu,$mips_fpu_bitsize)
88
89
90
91 #
92 # Select the level of SMP support
93 #
94 case "${target}" in
95   *)                    mips_smp=0 ;;
96 esac
97 SIM_AC_OPTION_SMP($mips_smp)
98
99
100
101 #
102 # Select the IGEN architecture
103 #
104 sim_gen=IGEN
105 sim_igen_machine="-M mipsIV"
106 sim_m16_machine="-M mips16,mipsIII"
107 sim_igen_filter="32,64,f"
108 sim_m16_filter="16"
109 sim_mach_default="mips8000"
110
111 case "${target}" in
112   mips*tx39*)           sim_gen=IGEN
113                         sim_igen_filter="32,f"
114                         sim_igen_machine="-M r3900"
115                         ;;
116   mips64vr43*-*-*)      sim_gen=IGEN
117                         sim_igen_machine="-M mipsIV"
118                         sim_mach_default="mips8000"
119                         ;;
120   mips64vr5*-*-*)       sim_gen=IGEN
121                         sim_igen_machine="-M vr5000"
122                         sim_mach_default="mips5000"
123                         ;;
124   mips64vr41*)          sim_gen=M16
125                         sim_igen_machine="-M vr4100"
126                         sim_m16_machine="-M vr4100"
127                         sim_igen_filter="32,64,f"
128                         sim_m16_filter="16"
129                         sim_mach_default="mips4100"
130                         ;;
131   mips64vr-*-* | mips64vrel-*-*)
132                         sim_gen=MULTI
133                         sim_multi_configs="\
134                           vr4100:mipsIII,mips16,vr4100:32,64:mips4100,mips4111\
135                           vr4120:mipsIII,mips16,vr4120:32,64:mips4120\
136                           vr5000:mipsIV:32,64,f:mips4300,mips5000\
137                           vr5400:mipsIV,vr5400:32,64,f:mips5400\
138                           vr5500:mipsIV,vr5500:32,64,f:mips5500"
139                         sim_multi_default=mips5000
140                         ;;
141   mips*-sde-elf* | mips*-mti-elf*)
142                         sim_gen=MULTI
143                         sim_multi_configs="\
144                           micromips:micromips64,micromipsdsp:32,64,f:mips_micromips\
145                           mips64r2:mips64r2,mips3d,mips16,mips16e,mdmx,dsp,dsp2,smartmips:32,64,f:mipsisa64r2"
146                         sim_multi_default=mipsisa64r2
147                         ;;
148   mips64*-*-*)          sim_igen_filter="32,64,f"
149                         sim_gen=IGEN
150                         ;;
151   mips16*-*-*)          sim_gen=M16
152                         sim_igen_filter="32,64,f"
153                         sim_m16_filter="16"
154                         ;;
155   mipsisa32r2*-*-*)     sim_gen=MULTI
156                         sim_multi_configs="\
157                           micromips:micromips32,micromipsdsp:32,f:mips_micromips\
158                           mips32r2:mips32r2,mips3d,mips16,mips16e,mdmx,dsp,dsp2,smartmips:32,f:mipsisa32r2"
159                         sim_multi_default=mipsisa32r2
160                         ;;
161   mipsisa32*-*-*)       sim_gen=M16
162                         sim_igen_machine="-M mips32,mips16,mips16e,smartmips"
163                         sim_m16_machine="-M mips16,mips16e,mips32"
164                         sim_igen_filter="32,f"
165                         sim_mach_default="mipsisa32"
166                         ;;
167   mipsisa64r2*-*-*)     sim_gen=M16
168                         sim_igen_machine="-M mips64r2,mips3d,mips16,mips16e,mdmx,dsp,dsp2"
169                         sim_m16_machine="-M mips16,mips16e,mips64r2"
170                         sim_igen_filter="32,64,f"
171                         sim_mach_default="mipsisa64r2"
172                         ;;
173   mipsisa64sb1*-*-*)    sim_gen=IGEN
174                         sim_igen_machine="-M mips64,mips3d,sb1"
175                         sim_igen_filter="32,64,f"
176                         sim_mach_default="mips_sb1"
177                         ;;
178   mipsisa64*-*-*)       sim_gen=M16
179                         sim_igen_machine="-M mips64,mips3d,mips16,mips16e,mdmx"
180                         sim_m16_machine="-M mips16,mips16e,mips64"
181                         sim_igen_filter="32,64,f"
182                         sim_mach_default="mipsisa64"
183                         ;;
184   mips*lsi*)            sim_gen=M16
185                         sim_igen_machine="-M mipsIII,mips16"
186                         sim_m16_machine="-M mips16,mipsIII"
187                         sim_igen_filter="32,f"
188                         sim_m16_filter="16"
189                         sim_mach_default="mips4000"
190                         ;;
191   mips*-*-*)            sim_gen=IGEN
192                         sim_igen_filter="32,f"
193                         ;;
194 esac
195
196 # The MULTI generator can combine several simulation engines into one.
197 # executable.  A configuration which uses the MULTI should set two
198 # variables: ${sim_multi_configs} and ${sim_multi_default}.
199 #
200 # ${sim_multi_configs} is the list of engines to build.  Each
201 # space-separated entry has the form NAME:MACHINE:FILTER:BFDMACHS,
202 # where:
203 #
204 # - NAME is a C-compatible prefix for the engine,
205 # - MACHINE is a -M argument,
206 # - FILTER is a -F argument, and
207 # - BFDMACHS is a comma-separated list of bfd machines that the
208 #     simulator can run.
209 #
210 # Each entry will have a separate simulation engine whose prefix is
211 # m32<NAME>.  If the machine list includes "mips16", there will also
212 # be a mips16 engine, prefix m16<NAME>.  The mips16 engine will be
213 # generated using the same machine list as the 32-bit version,
214 # but the filter will be "16" instead of FILTER.
215 #
216 # The simulator compares the bfd mach against BFDMACHS to decide
217 # which engine to use.  Entries in BFDMACHS should be bfd_mach
218 # values with "bfd_mach_" removed.  ${sim_multi_default} says
219 # which entry should be the default.
220 if test ${sim_gen} = MULTI; then
221
222   # Simple sanity check.
223   if test -z "${sim_multi_configs}" || test -z "${sim_multi_default}"; then
224     AC_MSG_ERROR(Error in configure.ac: MULTI simulator not set up correctly)
225   fi
226
227   # Start in a known state.
228   rm -f multi-include.h multi-run.c
229   sim_multi_flags=
230   sim_multi_src=
231   sim_multi_obj=
232   sim_multi_igen_configs=
233   sim_seen_default=no
234
235   cat << __EOF__ > multi-run.c
236 /* Main entry point for MULTI simulators.
237    Copyright (C) 2003-2015 Free Software Foundation, Inc.
238
239    This program is free software; you can redistribute it and/or modify
240    it under the terms of the GNU General Public License as published by
241    the Free Software Foundation; either version 3 of the License, or
242    (at your option) any later version.
243
244    This program is distributed in the hope that it will be useful,
245    but WITHOUT ANY WARRANTY; without even the implied warranty of
246    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
247    GNU General Public License for more details.
248
249    You should have received a copy of the GNU General Public License
250    along with this program.  If not, see <http://www.gnu.org/licenses/>.
251
252    --
253
254    This file was generated by sim/mips/configure.  */
255
256 #include "sim-main.h"
257 #include "multi-include.h"
258 #include "elf-bfd.h"
259 #include "elf/mips.h"
260
261 #define SD sd
262 #define CPU cpu
263
264 void
265 sim_engine_run (SIM_DESC sd,
266                 int next_cpu_nr,
267                 int nr_cpus,
268                 int signal) /* ignore */
269 {
270   int mach;
271
272   if (STATE_ARCHITECTURE (sd) == NULL)
273     mach = bfd_mach_${sim_multi_default};
274   else if (elf_elfheader (sd->base.prog_bfd)->e_flags
275            & EF_MIPS_ARCH_ASE_MICROMIPS)
276     mach = bfd_mach_mips_micromips;
277   else
278     mach = STATE_ARCHITECTURE (SD)->mach;
279
280   switch (mach)
281     {
282 __EOF__
283
284   for fc in ${sim_multi_configs}; do
285
286     # Split up the entry.  ${c} contains the first three elements.
287     # Note: outer sqaure brackets are m4 quotes.
288     c=`echo ${fc} | sed ['s/:[^:]*$//']`
289     bfdmachs=`echo ${fc} | sed 's/.*://'`
290     name=`echo ${c} | sed 's/:.*//'`
291     machine=`echo ${c} | sed 's/.*:\(.*\):.*/\1/'`
292     filter=`echo ${c} | sed 's/.*://'`
293
294     # Build the following lists:
295     #
296     #   sim_multi_flags: all -M and -F flags used by the simulator
297     #   sim_multi_src: all makefile-generated source files
298     #   sim_multi_obj: the objects for ${sim_multi_src}
299     #   sim_multi_igen_configs: igen configuration strings.
300     #
301     # Each entry in ${sim_multi_igen_configs} is a prefix (m32
302     # or m16) followed by the NAME, MACHINE and FILTER part of
303     # the ${sim_multi_configs} entry.
304     sim_multi_flags="${sim_multi_flags} -F ${filter} -M ${machine}"
305
306     # Check whether special handling is needed.
307     case ${c} in
308       *:*mips16*:*)
309         # Run igen twice, once for normal mode and once for mips16.
310         ws="m32 m16"
311
312         # The top-level function for the mips16 simulator is
313         # in a file m16${name}_run.c, generated by the
314         # tmp-run-multi Makefile rule.
315         sim_multi_src="${sim_multi_src} m16${name}_run.c"
316         sim_multi_obj="${sim_multi_obj} m16${name}_run.o"
317         sim_multi_flags="${sim_multi_flags} -F 16"
318         ;;
319       *:*micromips32*:*)
320         # Run igen thrice, once for micromips32, once for micromips16,
321         # and once for m32.
322         ws="micromips_m32 micromips16 micromips32"
323
324         # The top-level function for the micromips simulator is
325         # in a file micromips${name}_run.c, generated by the
326         # tmp-run-multi Makefile rule.
327         sim_multi_src="${sim_multi_src} micromips${name}_run.c"
328         sim_multi_obj="${sim_multi_obj} micromips${name}_run.o"
329         sim_multi_flags="${sim_multi_flags} -F 16,32"
330         ;;
331       *:*micromips64*:*)
332         # Run igen thrice, once for micromips64, once for micromips16,
333         # and once for m64.
334         ws="micromips_m64 micromips16 micromips64"
335
336         # The top-level function for the micromips simulator is
337         # in a file micromips${name}_run.c, generated by the
338         # tmp-run-multi Makefile rule.
339         sim_multi_src="${sim_multi_src} micromips${name}_run.c"
340         sim_multi_obj="${sim_multi_obj} micromips${name}_run.o"
341         sim_multi_flags="${sim_multi_flags} -F 16,32,64"
342         ;;
343       *)
344         ws=m32
345         ;;
346     esac
347
348     # Now add the list of igen-generated files to ${sim_multi_src}
349     # and ${sim_multi_obj}.
350     for w in ${ws}; do
351       for base in engine icache idecode model semantics support; do
352         sim_multi_src="${sim_multi_src} ${w}${name}_${base}.c"
353         sim_multi_src="${sim_multi_src} ${w}${name}_${base}.h"
354         sim_multi_obj="${sim_multi_obj} ${w}${name}_${base}.o"
355       done
356       sim_multi_igen_configs="${sim_multi_igen_configs} ${w}${c}"
357     done
358
359     # Add an include for the engine.h file.  This file declares the
360     # top-level foo_engine_run() function.
361     echo "#include \"${w}${name}_engine.h\"" >> multi-include.h
362
363     # Add case statements for this engine to sim_engine_run().
364     for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
365       echo "    case bfd_mach_${mach}:" >> multi-run.c
366       if test ${mach} = ${sim_multi_default}; then
367         echo "    default:" >> multi-run.c
368         sim_seen_default=yes
369       fi
370     done
371     echo "      ${w}${name}_engine_run (sd, next_cpu_nr, nr_cpus, signal);" \
372       >> multi-run.c
373     echo "      break;" >> multi-run.c
374   done
375
376   # Check whether we added a 'default:' label.
377   if test ${sim_seen_default} = no; then
378     AC_MSG_ERROR(Error in configure.ac: \${sim_multi_configs} doesn't have an entry for \${sim_multi_default})
379   fi
380
381   cat << __EOF__ >> multi-run.c
382     }
383 }
384
385 int
386 mips_mach_multi (SIM_DESC sd)
387 {
388   if (STATE_ARCHITECTURE (sd) == NULL)
389     return bfd_mach_${sim_multi_default};
390
391   switch (STATE_ARCHITECTURE (SD)->mach)
392     {
393 __EOF__
394
395   # Add case statements for this engine to mips_mach_multi().
396   for fc in ${sim_multi_configs}; do
397
398     # Split up the entry.  ${c} contains the first three elements.
399     # Note: outer sqaure brackets are m4 quotes.
400     c=`echo ${fc} | sed ['s/:[^:]*$//']`
401     bfdmachs=`echo ${fc} | sed 's/.*://'`
402
403     for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
404       echo "    case bfd_mach_${mach}:" >> multi-run.c
405     done
406   done
407
408   cat << __EOF__ >> multi-run.c
409       return (STATE_ARCHITECTURE (SD)->mach);
410     default:
411       return bfd_mach_${sim_multi_default};
412     }
413 }
414 __EOF__
415
416   SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_MULTI"
417 else
418   # For clean-extra
419   sim_multi_src=doesnt-exist.c
420
421   if test x"${sim_mach_default}" = x""; then
422     AC_MSG_ERROR(Error in configure.ac: \${sim_mach_default} not defined)
423   fi
424   SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_DEFAULT=bfd_mach_${sim_mach_default}"
425 fi
426 sim_igen_flags="-F ${sim_igen_filter} ${sim_igen_machine} ${sim_igen_smp}"
427 sim_m16_flags=" -F ${sim_m16_filter}  ${sim_m16_machine}  ${sim_igen_smp}"
428 sim_micromips16_flags=" -F ${sim_micromips16_filter}  ${sim_micromips16_machine}  ${sim_igen_smp}"
429 sim_micromips_flags=" -F ${sim_micromips_filter}  ${sim_micromips_machine}  ${sim_igen_smp}"
430 AC_SUBST(sim_igen_flags)
431 AC_SUBST(sim_m16_flags)
432 AC_SUBST(sim_micromips_flags)
433 AC_SUBST(sim_micromips16_flags)
434 AC_SUBST(sim_gen)
435 AC_SUBST(sim_multi_flags)
436 AC_SUBST(sim_multi_igen_configs)
437 AC_SUBST(sim_multi_src)
438 AC_SUBST(sim_multi_obj)
439 #
440 # Add simulated hardware devices
441 #
442 hw_enabled=no
443 case "${target}" in
444   mips*tx39*)
445         hw_enabled=yes
446         hw_extra_devices="tx3904cpu tx3904irc tx3904tmr tx3904sio" 
447         ;;
448   *)
449         ;;
450 esac
451 SIM_AC_OPTION_HARDWARE($hw_enabled,$hw_devices,$hw_extra_devices)
452
453
454 # Choose simulator engine
455 case "${target}" in
456   *)    mips_igen_engine="engine.o"
457         ;;
458 esac
459 AC_SUBST(mips_igen_engine)
460
461
462 AC_PATH_X
463 mips_extra_libs=""
464 AC_SUBST(mips_extra_libs)
465
466 AC_CHECK_LIB(m, fabs)
467 AC_CHECK_FUNCS(aint anint sqrt)
468
469 SIM_AC_OUTPUT