1 2004-06-10 Michael Snyder <msnyder@redhat.com>
3 Patch submitted by Nitin Yewale <NitinY@KPITCummins.com>.
4 * compile.c (sim_resume): Corrected ANDC operation on EXR for H8S.
6 2004-01-05 Michael Snyder <msnyder@redhat.com>
8 * compile.c (sim_load): Don't pass a type to bfd_openr.
10 2003-12-16 Michael Snyder <msnyder@redhat.com>
12 Patch submitted by Anil Paranjape <AnilP1@KPITCummins.com>
13 * sim-main.h (H8300H_MSIZE): Increase from 18 bits to 24 bits.
15 2003-12-11 Dhananjay Deshpande <dhananjayd@kpitcummins.com>
17 * compile.c (set_h8300h): Initialize globals to zero.
19 2003-10-17 Shrinivas Atre <shrinivasa@KPITCummins.com>
21 * compile.c (h8300_normal_mode): New.
22 (SP): Handle normal mode.
23 (bitfrom): Use normal mode flag to return suitable value.
24 (lvalue): Use normal mode flag to return command line location.
25 (decode): Decode instruction correctly for normal mode.
26 (init_pointers): Initialise memory correctly for normal mode.
27 (sim_resume): Handle cases for normal mode using h8300_normal_mode
29 (sim_store_register): Handle 2 byte PC for normal mode.
30 (sim_fetch_register): Handle 2 byte PC for normal mode.
31 (set_h8300h): Set normal mode flag as per architechture.
32 (sim_load): Allocate 64K for normal mode instead of bigger memory.
34 2003-07-18 Michael Snyder <msnyder@redhat.com>
36 * compile.c (decode): Enhancements for mova.
37 Initialize cst, reg, and rdisp inside the loop, for each
38 new instruction. Defer correction of the disp2 values until
39 later, and then adjust them by the size of the first operand,
40 rather than the size of the instruction.
41 (sim_resume): For mova, adjust the size of the second operand
42 according to the type of the first operand (INDEXB vs. INDEXW).
43 In cases where there is only one operand, the other two must
44 both be composed on the fly.
46 2003-07-22 Michael Snyder <msnyder@redhat.com>
48 * compile.c (sim_resume): Revert 6-24 change, it does not
49 work with gdb breakpoints.
51 2003-07-17 Michael Snyder <msnyder@redhat.com>
53 * compile.c (sim_resume): Handle shll reg, reg and shlr reg, reg.
54 (decode): IMM16 is always zero-extended.
56 2003-06-24 Michael Snyder <msnyder@redhat.com>
58 * sim-main.h (SIM_WIFSTOPPED, SIM_WSTOPSIG): Define.
59 * compile.c (sim_resume): Use the above to return stop signal.
61 2003-06-18 Michael Snyder <msnyder@redhat.com>
63 * compile.c: Replace "Hitachi" with "Renesas".
64 (decode): Distinguish AV_H8S from AV_H8H.
65 (sim_resume): H8SX can use any register for TAS.
66 (decode): Add support for VECIND.
67 (sim_resume): Implement rte/l and rts/l.
68 (GETSR): New macro (actually old macro reincarnated).
69 (decode): Add handling for IMM2.
70 (sim_resume): Drop extra block around jmp, jsr, rts.
71 Add handling for trapa and rte.
72 For divxu.b, change 0xffff mask to 0xff.
73 (set_h8300h): Add bfd_mach_h8300sxn machine.
75 2003-06-18 Corinna Vinschen <vinschen@redhat.com>
77 * sim-main.h (enum h8_regnum): Turn around order of MACH, MACL
80 2003-06-05 Michael Snyder <msnyder@redhat.com>
82 * compile.c (sim_fetch_register): Handle SBR, VBR, MACH, MACL.
83 (sim_store_register): Ditto.
85 2003-06-04 Michael Snyder <msnyder@redhat.com>
87 * compile.c (sim_info): Fix typo in output.
89 * compile.c (set_h8300h): Replace 'flag' arguments
90 with a bfd_machine argument, and decode it inline.
91 Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
93 2003-06-03 Michael Snyder <msnyder@redhat.com>
95 * compile.c: Add h8300sx insns and addressing modes.
96 * sim-main.h: Replaces h8300/inst.h.
97 * Makefile.in: Tweak to bring in some sim/common stuff.
99 2003-04-13 Michael Snyder <msnyder@redhat.com>
101 * compile.c (sim_resume): Implement 'daa' and 'das' instructions.
103 2003-03-20 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
105 * compile.c (cmdline_location): Added function to
106 return the location of 8-bit (256 locations) where the
107 Command Line arguments would be stored.
108 (decode): Added a TRAP to 0xcc for Commandline
109 processing using pseudo opcode O_SYS_CMDLINE.
110 (sim_resume): Added handling of O_SYS_CMDLINE Trap.
111 (sim_create_inferior): Setting a pointer to
112 Commandline Args array.
113 * inst.h: Added a new variable ptr_command_line for
114 storing pointer to Commandline array.
116 2003-03-14 D.Venkatasubramanian <dvenkat@noida.hcltech.com>
118 * compile.c (decode): Added code for some more magic traps.
119 * compile.c (sim_resume): Added support for File I/O system
120 calls through callback to host_system.
121 System calls provided support for :
122 open, read, write, lseek, close, stat, fstat
123 Only basic support for stat and fstat.
125 2003-02-27 Andrew Cagney <cagney@redhat.com>
127 * compile.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
129 2003-02-05 Kazu Hirata <kazu@cs.umass.edu>
131 * compile.c (init_pointers): Abort if wreg never gets initialized.
132 (sim_resume): Fix the handling of exts.w and extu.w.
134 2003-01-31 Kazu Hirata <kazu@cs.umass.edu>
136 * compile.c (sim_resume): Fix the handling of bxor.
138 2003-01-16 Michael Snyder <msnyder@redhat.com>
140 * compile.c: Change K&R function definitions to ISO.
141 (fetch): Make static, and eliminate unused parameter 'n'.
143 2002-12-26 Kazu Hirata <kazu@cs.umass.edu>
145 * compile.c: Fix formatting.
148 2002-07-29 Andrey Volkov <avolkov@transas.com>
150 * compile.c: Include "gdb/sim-h8300.h"
151 * Makefile.in: Add dependences on "inst.h",
152 "gdb/callback.h", "gdb/remote-sim.h" and "gdb/sim-h8300.h".
154 2002-06-16 Andrew Cagney <ac131313@redhat.com>
156 * configure: Regenerated to track ../common/aclocal.m4 changes.
158 2002-06-08 Andrew Cagney <cagney@redhat.com>
160 * compile.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
162 2002-05-19 Kazu Hirata <kazu@cs.umass.edu>
164 * compile.c: Fix formatting.
166 2002-05-18 Kazu Hirata <kazu@cs.umass.edu>
168 * compile.c: Fix formatting.
170 2002-05-17 Andrey Volkov (avolkov@transas.com)
172 * compile.c: Add absented opcodes: LDC, STC, EEPMOV, TAS.
174 2002-05-17 Andrey Volkov (avolkov@transas.com)
176 * compile.c: Add support of EXR register
179 2002-05-17 Andrey Volkov (avolkov@transas.com)
181 * compile.c: Made h8300s as new target, not h8300h alias.
184 2002-05-17 Andrey Volkov (avolkov@transas.com)
186 * compile.c: Add additional CCR flags (I,UI,H,U)
188 2002-05-17 Andrey Volkov (avolkov@transas.com)
190 * compile.c: Change literal regnumbers to REGNUMS.
191 Fix instruction and cycles counting
193 2001-12-20 Kazu Hirata <kazu@hxi.com>
195 * compile.c: Fix formatting.
197 2001-12-20 Kazu Hirata <kazu@hxi.com>
199 * compile.c: Fix comment typos.
201 2000-08-10 Kazu Hirata <kazu@hxi.com>
203 * compile.c (decode): Clean up the code.
205 2000-06-15 Kazu Hirata <kazu@hxi.com>
207 * compile.c (decode): Distinguish inc/dec.[wl] and adds/subs
210 2000-06-20 Frank Ch. Eigler <fche@redhat.com>
212 * compile.c: Don't include "wait.h".
213 (sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
214 instead of WIF* from host.
216 2000-06-13 Frank Ch. Eigler <fche@redhat.com>
218 * compile.c, writecode.c: Correct typo.
220 2000-06-13 Kazu Hirata <kazu@hxi.com>
222 * compile.c: Fix formatting.
224 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
226 * configure: Regenerated to track ../common/aclocal.m4 changes.
228 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
230 * configure: Regenerated to track ../common/aclocal.m4 changes.
232 1999-05-08 Felix Lee <flee@cygnus.com>
234 * configure: Regenerated to track ../common/aclocal.m4 changes.
236 1999-04-02 Keith Seitz <keiths@cygnus.com>
238 * compile.c (POLL_QUIT_INTERVAL): Define. Used to tweak the
239 frequency at which the poll_quit callback is used.
240 (sim_resume): Use POLL_QUIT_INTERVAL instead of hard-coded value.
242 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
244 * configure: Regenerated to track ../common/aclocal.m4 changes.
246 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
248 * configure: Regenerated to track ../common/aclocal.m4 changes.
251 Sun Apr 26 15:20:14 1998 Tom Tromey <tromey@cygnus.com>
253 * acconfig.h: New file.
254 * configure.in: Reverted change of Apr 24; use sinclude again.
256 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
258 * configure: Regenerated to track ../common/aclocal.m4 changes.
261 Fri Apr 24 11:19:46 1998 Tom Tromey <tromey@cygnus.com>
263 * configure.in: Don't call sinclude.
265 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
267 * configure: Regenerated to track ../common/aclocal.m4 changes.
269 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
271 * configure: Regenerated to track ../common/aclocal.m4 changes.
273 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
275 * configure: Regenerated to track ../common/aclocal.m4 changes.
277 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
279 * configure: Regenerated to track ../common/aclocal.m4 changes.
281 Tue Feb 17 12:42:18 1998 Andrew Cagney <cagney@b1.cygnus.com>
283 * compile.c (sim_store_register, sim_fetch_register): Pass in
284 length parameter. Return -1.
286 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
288 * configure: Regenerated to track ../common/aclocal.m4 changes.
290 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
292 * configure: Regenerated to track ../common/aclocal.m4 changes.
294 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
296 * configure: Regenerated to track ../common/aclocal.m4 changes.
298 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
300 * configure: Regenerated to track ../common/aclocal.m4 changes.
303 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
305 * configure: Regenerated to track ../common/aclocal.m4 changes.
307 Tue Nov 11 16:52:07 1997 Angela Marie Thomas (angela@cygnus.com)
309 * compile.c: #include stdio.h for definition of NULL on
312 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
314 * compile.c (sim_load): Pass lma_p and sim_write args to
317 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
319 * configure: Regenerated to track ../common/aclocal.m4 changes.
321 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
323 * configure: Regenerated to track ../common/aclocal.m4 changes.
325 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
327 * configure: Regenerated to track ../common/aclocal.m4 changes.
329 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
331 * configure: Regenerated to track ../common/aclocal.m4 changes.
333 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
335 * configure: Regenerated to track ../common/aclocal.m4 changes.
337 Wed Sep 17 12:00:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
339 * Makefile.in (compile.o): Depend on config.h in local directory.
341 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
343 * configure: Regenerated to track ../common/aclocal.m4 changes.
345 Tue Sep 9 22:17:26 1997 Felix Lee <flee@cygnus.com>
347 * inst.h (sim_state): rename to h8300_sim_state, to avoid conflict
349 * configure.in: check for sys/param.h
350 * compile.c: #ifdef HAVE_SYS_PARAM_H.
351 #define SIGTRAP for wingdb.
352 (sim_resume): poll keyboard at least once per call.
353 (sim_resume): use host_callback instead of printf for syscall
356 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
358 * configure: Regenerated to track ../common/aclocal.m4 changes.
360 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
362 * configure: Regenerated to track ../common/aclocal.m4 changes.
365 Tue Aug 26 10:38:43 1997 Andrew Cagney <cagney@b1.cygnus.com>
367 * compile.c (sim_kill): Delete.
368 (sim_create_inferior): Add ABFD argument.
369 (sim_load): Move setting of PC from here.
370 (sim_create_inferior): To here.
371 (sim_open, sim_load, set_h8300h): Add fixme explaining why much of
372 the sim_load code should be moved to sim_open.
374 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
376 * configure: Regenerated to track ../common/aclocal.m4 changes.
379 Mon Aug 25 15:47:41 1997 Andrew Cagney <cagney@b1.cygnus.com>
381 * compile.c (sim_open): Add ABFD argument.
383 Tue May 20 10:16:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
385 * compile.c (sim_open): Add callback argument.
386 (sim_set_callbacks): Delete SIM_DESC argument.
388 Wed Apr 30 10:22:29 1997 Doug Evans <dje@canuck.cygnus.com>
390 * compile.c (sim_load): Call bfd_get_mach instead of examining
392 * tconfig.in (SIM_PRE_LOAD): Delete, no longer used.
394 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
396 * configure: Regenerated to track ../common/aclocal.m4 changes.
398 Fri Apr 18 14:30:09 1997 Andrew Cagney <cagney@b1.cygnus.com>
400 * compile.c (sim_resume): Use poll_quit callback.
401 (sim_stop): New function.
403 Thu Apr 17 03:06:39 1997 Doug Evans <dje@canuck.cygnus.com>
405 * Makefile.in (SIM_OBJS): Add sim-load.o.
406 * compile.c (sim_kind, myname): New static locals.
407 (sim_open): Set sim_kind, myname.
408 (sim_load): Return SIM_RC. New arg abfd. Update test for h8300h.
409 Call sim_load_file to load file into simulator. Set start address
411 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
413 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
415 * configure: Regenerated to track ../common/aclocal.m4 changes.
418 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
420 * compile.c (sim_open): New arg `kind'.
422 * configure: Regenerated to track ../common/aclocal.m4 changes.
424 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
426 * configure: Regenerated to track ../common/aclocal.m4 changes.
428 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
430 * configure: Regenerated to track ../common/aclocal.m4 changes.
432 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
434 * configure: Re-generate.
436 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
438 * configure: Regenerate to track ../common/aclocal.m4 changes.
440 Thu Mar 13 12:48:05 1997 Doug Evans <dje@canuck.cygnus.com>
442 * compile.c (sim_open): New SIM_DESC result. Argument is now in
444 (other sim_*): New SIM_DESC argument.
446 Tue Feb 4 13:36:29 1997 Doug Evans <dje@canuck.cygnus.com>
448 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
449 COMMON_{PRE,POST}_CONFIG_FRAG instead.
450 * configure.in: sinclude ../common/aclocal.m4.
451 * configure: Regenerated.
453 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
455 * configure configure.in Makefile.in: Update to new configure
456 scheme which is more compatible with WinGDB builds.
457 * configure.in: Improve comment on how to run autoconf.
458 * configure: Re-run autoconf to get new ../common/aclocal.m4.
459 * Makefile.in: Use autoconf substitution to install common
462 Wed Nov 20 01:39:12 1996 Doug Evans <dje@canuck.cygnus.com>
464 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
466 * configure.in: Simplify using macros in ../common/aclocal.m4.
467 * configure: Regenerated.
468 * inst.h (enum sim_state): Define.
469 (cpu_state_type): New member `state'. Set it whenever `exception'
471 * compile.c (sim_callback): New global.
472 (sim_set_simcache_size): Renamed from sim_csize.
473 (sim_resume, case O_SLEEP): Add right way to decode r0 but #if 0 out
474 'cus it can't work. Change main loop exit test to use cpu.state.
475 (sim_trace): New function.
476 (sim_stop_reason): Add right way to set results, but #if 0 out.
477 (sim_size): New function.
478 (sim_info): Redirect calls to printf_filtered through callback.
479 (sim_set_callbacks): Record callback.
480 * run.c: Deleted, using one in ../common now.
481 * tconfig.in: New file.
483 Thu Oct 3 16:13:18 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
485 * Makefile.in (mostlyclean): Don't remove config.log here.
487 Fri Aug 9 22:59:11 1996 Jeffrey A Law (law@cygnus.com)
489 * compile.c (sim_resume): rts, sleep, bpt and nop have
490 no associated "size".
492 Tue Jul 9 22:15:39 1996 Jeffrey A Law (law@cygnus.com)
494 * compile.c (sim_resume): Fix all rotate-by-2-bits insns.
496 Tue Jul 2 23:08:45 1996 Jeffrey A Law (law@cygnus.com)
498 * run.c (main): Don't "load" sections which don't have
500 * compile.c (sim_resume, case "O_NOT"): Use ONOT instead
503 (sim_resume, shift/rotate cases): Add support for shift/rotate
505 (OSHIFTS): Corresponding changes.
507 Tue Jul 2 01:37:27 1996 Jeffrey A Law (law@cygnus.com)
509 * compile.c (sim_resume): Handle "ldm.l" and "stm.l".
511 Wed Jun 26 08:58:53 1996 Jeffrey A Law (law@cygnus.com)
513 * compile.c (h8300smode): Declare.
515 Wed Jun 26 12:20:56 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
517 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
518 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
520 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
521 (AC_PROG_INSTALL): Added.
522 * configure: Rebuilt.
524 Tue Jun 18 16:31:10 1996 Jeffrey A. Law <law@rtl.cygnus.com>
526 * compile.c (sim_load): Treat the H8/S like the H8/300H for now.
527 * run.c (main): Treat the H8/S like the H8/300H for now.
529 Fri May 24 10:35:25 1996 Jeffrey A Law (law@cygnus.com)
531 * compile.c (SEXTCHAR): Clear upper bits when sign
534 Wed May 22 22:23:37 1996 Jeffrey A Law (law@cygnus.com)
536 * compile.c (sim_resume): Correctly handle divu.
538 Tue May 7 02:13:05 1996 Jeffrey A Law (law@cygnus.com)
540 * compile.c (sim_resume): Never allow the PC to have an
543 Fri Apr 12 16:50:37 1996 Jeffrey A Law (law@cygnus.com)
545 * inst.h: Expand on comments regarding H8300H_MSIZE. Note
546 separate memory is allocate for the 8-bit area.
547 (struct cpu_state_type): Add new "eightbit' field.
548 * compile.c (GET_MEMORY_L): Handle access into the 8-bit
550 (GET_MEMORY_W, GET_MEMORY_B): Likewise.
551 (SET_MEMORY_L, SET_MEMORY_W, SET_MEMORY_B): Likewise.
552 (init_pointers): Initialize space for the 8-bit area.
553 (sim_write): Handle writing into the 8-bit area.
554 (sim_read): Handle reading from the 8-bit area.
555 (sim_load): Reallocate space for the 8-bit area.
557 * compile.c (sim_load): Re-allocate memory for the simulator
560 Fri Apr 12 09:39:56 1996 Jeffrey A Law (law@cygnus.com)
562 * compile.c (sim_resume): Fix and simplify overflow and carry
563 handling for 32bit ALU insns.
565 Mon Apr 8 23:58:49 1996 Jeffrey A Law (law@cygnus.com)
567 * compile.c (sim_resume): Fix overflow checks for ALU insns.
569 Fri Apr 5 17:20:59 1996 Jeffrey A Law (law@cygnus.com)
571 * compile.c (decode): Use "bit" to hold L_3 immediates instead
572 of holding them in "abs". Handle ABS8MEM memory references aka
573 8-bit area. Replace ABSMOV references with ABS8MEM.
575 Wed Mar 13 17:43:56 1996 Jeffrey A Law (law@cygnus.com)
577 * compile.c (fetch): Handle accesses to the exception/function
580 Mon Mar 11 09:53:25 1996 Doug Evans <dje@charmed.cygnus.com>
582 * compile.c: #include "wait.h".
583 (sim_resume, sleep insn): Check program exit status in r0.
584 (sim_resume, shift insns): Fix setting of overflow flag for shal.
585 * run.c: #include <signal.h>.
586 (main): Abort if program got SIGILL.
587 Print error message if argument is invalid.
588 (usage): Improve text.
590 Wed Feb 21 12:15:00 1996 Ian Lance Taylor <ian@cygnus.com>
592 * configure: Regenerate with autoconf 2.7.
594 Thu Jan 4 11:52:53 1996 Doug Evans <dje@canuck.cygnus.com>
596 * inst.h (MPOWER,MSIZE): Deleted.
597 (H8300{,H}_MSIZE): Define.
598 * compile.c (memory_size): New static global.
599 (init_pointers): Set memory size from one of H8300{,H}_MSIZE.
600 (sim_write,sim_read): Use memory_size.
602 Fri Oct 13 15:03:19 1995 steve chamberlain <sac@slash.cygnus.com>
604 * compile.c (sim_set_callbacks): New.
606 Tue Oct 10 11:11:26 1995 Fred Fish <fnf@cygnus.com>
608 * Makefile.in (BISON): Remove macro.
610 Wed Sep 20 13:35:02 1995 Ian Lance Taylor <ian@cygnus.com>
612 * Makefile.in (maintainer-clean): New synonym for realclean.
614 Fri Sep 8 12:18:53 1995 Ian Lance Taylor <ian@cygnus.com>
616 * Makefile.in (install): Don't install in $(tooldir).
618 * configure.in: Call AC_CONFIG_HEADER. Don't try to use
619 bfd/hosts/*.h file or bfd/config/*.mh file. Call AC_PROG_CC and
620 AC_PROG_RANLIB. Substitute in values for CFLAGS, HDEFINES and AR.
621 Call AC_CHECK_HEADERS for stdlib.h and time.h. Touch stamp.h if
623 * configure: Rebuild.
624 * config.in: New file, created by autoheader.
625 * Makefile.in (AR): Define as @AR@.
626 (CC): New variable, defined as @CC@.
627 (CFLAGS): Define as @CFLAGS@.
628 (RANLIB): Define as @RANLIB@.
629 (HDEFINES, TDEFINES): New variables.
630 (@host_makefile_frag@): Remove.
631 (compile.o, run.o): Depend upon config.h.
632 (mostlyclean): Make the same as clean, not distclean.
633 (clean): Remove config.log.
634 (distclean): Remove config.h and stamp-h.
635 (Makefile): Don't depend upon @frags@. Just rebuild Makefile when
636 invoking config.status.
637 (config.h, stamp-h): New targets.
638 * compile.c: Include "config.h". Don't include <sys/times.h>.
639 Include <time.h> and <stdlib.h> if they exist. Don't include
641 (get_now): Remove unused local b.
642 * run.c: Include "config.h". Include <stdlib.h> if it exists.
643 Don't include "sysdep.h".
644 * writecode.c: Don't include "bfd.h" or "sysdep.h". Include
647 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
649 * Update all FSF addresses except those in COPYING* files.
651 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
653 * Makefile.in (clean): Remove run.
654 (distclean): Remove Makefile.
658 * Makefile.in, configure.in: converted to autoconf.
659 * configure: New file, generated with autconf 2.4.
661 Fri Jun 30 16:50:24 1995 Stan Shebs <shebs@andros.cygnus.com>
663 * compile.c (sim_do_command): New function.
665 Tue Jun 20 16:18:13 1995 Steve Chamberlain <sac@slash.cygnus.com>
667 * compile.c (get_now): Don't do if win32.
668 (sim_resume): Poll in win32 too.
670 Wed May 24 16:31:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
672 * configure.in: Fix typo in last change.
674 Mon Mar 27 10:32:34 1995 J.T. Conklin <jtc@rtl.cygnus.com>
676 * run.c: parse arguments with getopt().
678 Tue Feb 28 17:30:08 1995 Ian Lance Taylor <ian@cygnus.com>
680 * configure.in: Use ../../bfd/hosts/std-host.h if specific
683 Sun Jan 22 12:35:43 1995 Steve Chamberlain <sac@splat>
685 * compile.c (sim_resume): Initialize cpu.mask.
687 Thu Sep 8 16:53:00 1994 Steve Chamberlain (sac@jonny.cygnus.com)
689 * inst.h (MPOWER): Bump simulated memory size to 2^18 bytes.
691 Wed May 18 13:47:58 1994 Doug Evans (dje@canuck.cygnus.com)
693 * compile.c: #include "bfd.h".
694 (sim_*): Set result type to void where there isn't one.
695 (sim_resume, default case): Set cpu.exception to SIGILL.
697 (sim_set_pc): Delete.
698 (sim_info): Delete printf_fn arg, all callers changed.
699 Call printf_filtered.
700 (set_h8300h): New arg `flag', all callers changed.
701 (sim_close): New function.
702 (sim_load): New function.
703 (sim_create_inferior): Renamed from sim_set_args, all callers changed.
704 * run.c: #include <varargs.h>, "remote-sim.h".
705 (printf_filtered): New function.
707 Fri May 13 18:32:27 1994 Doug Evans (dje@canuck.cygnus.com)
709 * compile.c (decode): Fix typo (16 bit branches).
710 (*): Some white space clean up.
712 Fri May 6 13:44:01 1994 Steve Chamberlain (sac@jonny.cygnus.com)
714 * compile.c (decode): Compile 16bit branches properly.
716 Sat Dec 11 16:32:36 1993 Steve Chamberlain (sac@thepub.cygnus.com)
718 * compile.c: Tidy up formatting. (sim_resume): Add orc, xorc,
719 andc. Poll for interrupts.
721 Thu Oct 28 19:29:34 1993 Doug Evans (dje@canuck.cygnus.com)
723 * compile.c: #include "ansidecl.h" for remote-sim.h.
725 Tue Oct 26 09:43:36 1993 Doug Evans (dje@canuck.cygnus.com)
727 * Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
728 * compile.c: #include "remote-sim.h".
729 (sim_resume): New arg siggnal.
730 (sim_write): Use SIM_ADDR for type of arg addr.
731 Always return a value.
733 (sim_store_register): Result is type int.
734 (sim_fetch_register): Ditto.
735 (sim_stop_reason): Renamed from sim_stop_signal.
736 (sim_set_pc): Use SIM_ADDR for type of arg pc.
737 (sim_info): int result, new arg printf_fn.
738 (sim_kill): int result.
739 (sim_open): int result, new arg name.
740 * run.c (main): Use sim_set_pc to set pc.
741 Update call to sim_info.
743 Sat Oct 23 15:01:18 1993 Doug Evans (dje@canuck.cygnus.com)
745 * compile.c (sim_stop_signal): Result is now enum sim_stop.
747 Fri Oct 15 23:49:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
749 * compile.c (sim_kill, sim_open, sim_set_args): New functions.
751 Thu Oct 7 16:24:10 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
753 * compile.c (sim_set_pc): Write to the pc direcly.
754 (sim_store_register): Now value is passed by reference. (sim_read,
755 sim_write): Return number of bytes copied.
757 Tue Aug 17 07:16:15 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
759 * compile.c (mop): New function to do multiplies.
761 Fri Jul 16 13:53:53 1993 Doug Evans (dje@canuck.cygnus.com)
763 * compile.c (sim_resume): Add support for nop insn.
765 Thu Jul 15 09:59:01 1993 Doug Evans (dje@canuck.cygnus.com)
767 * compile.c: Reset HMODE back to zero (accidently set it to 1).
769 * run.c (main): If h8/300h binary detected, call set_h8300h.
770 * compile.c (sim_resume): Fix O_NEG insn.
772 Fri Jul 9 14:36:48 1993 Doug Evans (dje@canuck.cygnus.com)
774 * run.c (main): Add -h flag to enable h8/300h emulation.
775 * compile.c: Rename Hmode to HMODE (consistency with gdb).
776 (set_h8300h): New function.
777 (sim_resume): Add support for extu,exts insns.
778 (sim_resume): Fix logical right shifting.
779 (sim_resume, label alu32): Fix setting of carry flag.
781 Sun Jul 4 00:35:41 1993 Doug Evans (dje@canuck.cygnus.com)
783 * compile.c (sim_csize): Initialize cpu.cache.
785 Fri Jul 2 17:42:59 1993 Doug Evans (dje@canuck.cygnus.com)
787 * Makefile.in: Add -I../../bfd to pick up bfd.h.
789 Thu Jun 24 13:40:12 1993 Doug Evans (dje@canuck.cygnus.com)
791 * run.c (main): Fix parsing of args.
793 * compile.c (sim_resume): Fix shll insn.
795 Tue Jun 8 14:16:46 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
797 * compile.c: New file, supports H8/300H.
798 * p1,p3, gencode.c, state.h, writecode.c All dead and obsolete.
800 Tue Jun 1 11:14:59 1993 Steve Chamberlain (sac@thepub.cygnus.com)
802 * run.c (main): Add -v to print info.
803 * p3.c (sim_info): New function.
805 Mon Mar 15 15:48:31 1993 Ian Lance Taylor (ian@cygnus.com)
807 * h8300.mt (DO_INSTALL): Renamed from INSTALL.
809 Wed Mar 3 15:06:53 1993 Steve Chamberlain (sac@poseidon.cygnus.com)
811 * Makefile.in: Don't use cb or indent
812 * p1.c, state.h, writecode.c: lint
814 Mon Feb 1 16:44:58 1993 John Gilmore (gnu@cygnus.com)
816 * Makefile.in: Make SunOS halfdone VPATH work.
817 * p1.c: Lint picked up by HP native compiler.
819 Mon Jan 4 12:32:35 1993 Steve Chamberlain (sac@wahini.cygnus.com)
821 * p1.c (sim_resume): when running on dos, any character typed to
822 the keyboard will cause a simulated exception.
824 Sun Jan 3 14:15:07 1993 Steve Chamberlain (sac@thepub.cygnus.com)
826 * p1.c, p3.c, run.c, writecode.c: all used h8/300 opcodes in and
829 Tue Dec 22 13:56:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)