1 2016-01-10 Mike Frysinger <vapier@gentoo.org>
3 * configure: Regenerate.
5 2016-01-10 Mike Frysinger <vapier@gentoo.org>
7 * configure: Regenerate.
9 2016-01-10 Mike Frysinger <vapier@gentoo.org>
11 * configure: Regenerate.
13 2016-01-09 Mike Frysinger <vapier@gentoo.org>
15 * config.in, configure: Regenerate.
17 2016-01-06 Mike Frysinger <vapier@gentoo.org>
19 * interf.c (sim_open): Mark argv const.
20 (sim_create_inferior): Mark argv and env const.
22 2016-01-04 Mike Frysinger <vapier@gentoo.org>
24 * configure: Regenerate.
26 2016-01-03 Mike Frysinger <vapier@gentoo.org>
28 * interf.c (sim_open): Replace while loop with a call to countargv.
30 2016-01-03 Mike Frysinger <vapier@gentoo.org>
32 * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete.
33 * configure: Regenerate.
34 * exec.c (fpexec): Rename CURRENT_HOST_BYTE_ORDER to
36 * sis.h (WITH_HOST_BYTE_ORDER): Rename to ...
37 (HOST_BYTE_ORDER): ... this.
39 2016-01-02 Mike Frysinger <vapier@gentoo.org>
41 * configure: Regenerate.
43 2015-12-26 Mike Frysinger <vapier@gentoo.org>
45 * config.in, configure: Regenerate.
47 2015-06-23 Mike Frysinger <vapier@gentoo.org>
49 * configure: Regenerate.
51 2015-06-12 Mike Frysinger <vapier@gentoo.org>
53 * configure: Regenerate.
55 2015-06-12 Mike Frysinger <vapier@gentoo.org>
57 * configure: Regenerate.
59 2015-05-17 Mike Frysinger <vapier@gentoo.org>
61 * erc32.c: Re-add file overview & author info.
62 * exec.c, float.c, func.c, help.c, interf.c, sis.c: Likewise.
64 2015-05-08 Joel Brobecker <brobecker@adacore.com>
66 * configure.ac: Add copyright header.
67 * erc32.c: Change copyright holder to FSF. Reformat.
68 * exec.c, float.c, func.c, interf.c, sis.c, sis.h: Likewise.
69 * help.c, startsim: Add copyright header.
71 2015-04-29 Nick Clifton <nickc@redhat.com>
74 * sis.c (main): Remove unreachable code.
76 2015-04-24 David Binderman <dcb314@hotmail.com>
77 Nick Clifton <nickc@redhat.com>
80 * exec.c (add32): Fix typo in check for overflow.
82 2015-04-19 Jiri Gaisler <jiri@gaisler.se>
84 * erc32.c (current_target_byte_order): Delete.
85 (fetch_bytes): Remove.
86 (store_bytes): Remove byte twisting.
87 (memory_read, memory_write): Access memory directly.
88 (extract_short, extract_short_signed, extract_byte,
89 extract_byte_signed): New function for for sub-word LD instructions.
90 * exec.c (extract_short, extract_short_signed, extract_byte,
91 extract_byte_signed): New functions.
92 (dispatch_instruction): Update memory reads.
93 * func.c (current_target_byte_order): Delete.
94 (get_regi): Delete little endian handling.
95 (disp_ctrl, dis_mem): Adjust print-out to new data endian.
96 (bfd_load): Delete little endian handling.
97 * interf.c (current_target_byte_order): Delete.
98 (sim_open): Set dinfo to host endian to get correct disassembly.
99 (sim_write, sim_read): Convert endian when gdb reads or writes
101 * sis.c (main): Set endian.
102 * sis.h (EBT): Define.
104 2015-04-13 Mike Frysinger <vapier@gentoo.org>
106 * configure: Regenerate.
108 2015-03-31 Mike Frysinger <vapier@gentoo.org>
110 * config.in, configure: Regenerate.
112 2015-03-28 Jiri Gaisler <jiri@gaisler.se>
114 * func.c (exec_cmd): Fix old style prototype. Mark cmd const. Save
115 the command in a new cmdsave2 to avoid modifying.
116 (bfd_load): Fix old style prototype. Mark fname const.
117 * sis.h (exec_cmd): Mark cmd const.
118 (bfd_load): Mark fname const.
120 2015-03-28 Jiri Gaisler <jiri@gaisler.se>
122 * erc32.c (memory_iread): New function to fetch instructions.
123 (memory_read): Print message in verbose mode.
124 * interf.c (run_sim): Use memory_iread.
125 * sis.c (run_sim): As above.
126 * sis.h (memory_iread): New prototype.
129 2015-03-28 Mike Frysinger <vapier@gentoo.org>
131 * erc32.c (mec_read): Delete parenthesis around return statement.
132 (mec_write, read_uart, rtc_counter_read, gpt_counter_read, memory_read,
133 memory_write, get_mem_ptr, sis_memory_write, sis_memory_read): Likewise.
134 * exec.c (sub_cc, add_cc, add32, dispatch_instruction, fpexec, chk_asi,
135 execute_trap, check_interrupts): Likewise.
136 * float.c (get_accex): Likewise.
137 * func.c (batch, limcalc, exec_cmd, disp_fpu, now, wait_for_irq,
138 check_bpt, bfd_load, get_time): Likewise.
139 * interf.c (run_sim, sim_write, sim_read): Likewise.
140 * sis.c (run_sim): Likewise.
142 2015-03-24 Mike Frysinger <vapier@gentoo.org>
144 * interf.c (sim_set_callbacks, sim_size, sim_trace): Delete.
146 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
148 * func.c (exec_cmd): Silence compiler warnings when calling system().
149 (batch): Replace fgets() with getline().
151 2015-03-17 Jiri Gaisler <jiri@gaisler.se>
153 * func.c (show_stat): Print simulation time in portable long long
155 * help.c (usage): Update usage help print-out.
156 * sis.c (run_sim): Increase debug level with -v. Also print
157 simulation time in portable long long format.
158 * sis.h: Use stdint.h for portable 32- and 64-bit ints.
160 2015-03-16 Mike Frysinger <vapier@gentoo.org>
162 * config.in, configure: Regenerate.
164 2015-03-16 Jiri Gaisler <jiri@gaisler.se>
166 * Makefile.in (end, end.h): Remove target rules.
167 (clean): Remove end and end.h.
168 (erc32.o, exec.o, float.o, func.o, help.o, interf.o, sis.o): Delete
170 * configure, config.in: Regenerate.
171 * configure.ac: Use SIM_AC_OPTION_HOSTENDIAN
173 * erc32.c: Remove end.h include.
174 * exec.c: Remove end.h include. Use HOST_LITTLE_ENDIAN.
175 * func.c, sis.c: Likewise.
177 2015-03-14 Mike Frysinger <vapier@gentoo.org>
179 * Makefile.in (SIM_RUN_OBJS): Set to sis.o.
181 2015-03-14 Mike Frysinger <vapier@gentoo.org>
183 * configure.ac (AC_CHECK_HEADERS): Delete.
184 * aclocal.m4, configure: Regenerate.
186 2015-02-22 Jiri Gaisler <jiri@gaisler.se>
188 * Makefile.in: Add include path to readline.h.
189 sis.c: Remove locally define readline types.
191 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
193 * func.c (reset_stat, show_stat): Switch to double in time keeping.
194 (get_time): New function to get system time.
195 * interf.c (run_sim): Use get_time() for system time.
196 * sis.c (run_sim): Likewise.
199 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
201 * Makefile.in: Remove unused defines
203 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
205 * float.c (get_accex, clear_accex, set_fsr): Use functions from fenv.h
206 instead of custom assembly.
208 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
210 * erc32.c (mec_read): Allow simulator memory size to be read
212 (boot_init): initialize memory and timers if start address is
214 * func.c (exe_cmd): Call boot_init if start address not 0.
215 * interf.c (run_sim): Likewise.
217 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
219 * exec.c (init_regs): erc32 has vendor ID 1 and version ID 1 in %psr.
221 2015-02-21 Jiri Gaisler <jiri@gaisler.se>
223 * func.c (print_insn_sparc_sis): Add helper function for disassembly.
224 (disp_ctrl): Use helper function.
226 2014-08-19 Alan Modra <amodra@gmail.com>
228 * configure: Regenerate.
230 2014-08-15 Roland McGrath <mcgrathr@google.com>
232 * configure: Regenerate.
233 * config.in: Regenerate.
235 2014-03-10 Mike Frysinger <vapier@gentoo.org>
237 * interf.c (sim_do_command): Add const to cmd.
239 2014-03-05 Mike Frysinger <vapier@gentoo.org>
241 * interf.c (sim_load): Add const to prog.
243 2013-10-09 Sergio Durigan Junior <sergiodj@redhat.com>
246 * float.c (set_fsr): Add missing "break" statements. Reindent
249 2013-09-23 Alan Modra <amodra@gmail.com>
251 * configure: Regenerate.
253 2013-06-03 Mike Frysinger <vapier@gentoo.org>
255 * aclocal.m4, configure: Regenerate.
257 2013-03-14 Joel Sherrill <joel.sherrill@oarcorp.com>
259 * Makefile.in: Include build directory in search path to find
262 2012-08-16 Nick Clifton <nickc@redhat.com>
264 * end.c: Include config.h before system header files.
270 * interf.c: Likewise.
272 2012-06-15 Joel Brobecker <brobecker@adacore.com>
274 * sys.h: Include "config.h".
276 2012-06-15 Joel Brobecker <brobecker@adacore.com>
278 * config.in, configure: Regenerate.
280 2012-05-24 Pedro Alves <palves@redhat.com>
284 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
286 2012-03-24 Mike Frysinger <vapier@gentoo.org>
288 * aclocal.m4, config.in, configure: Regenerate.
290 2011-12-31 Mike Frysinger <vapier@gentoo.org>
293 * configure.ac: Change AC_CHECK_LIB to AC_SEARCH_LIBS to match
294 the code in gdb's configure.ac with $TERMCAP.
295 * configure: Regenerated.
297 2011-12-03 Mike Frysinger <vapier@gentoo.org>
299 * aclocal.m4: New file.
300 * configure: Regenerate.
302 2011-10-17 Mike Frysinger <vapier@gentoo.org>
304 * configure.ac: Change include to common/acinclude.m4.
306 2011-10-17 Mike Frysinger <vapier@gentoo.org>
308 * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
309 call. Replace common.m4 include with SIM_AC_COMMON.
310 * configure: Regenerate.
312 2011-06-09 Mike Frysinger <vapier@gentoo.org>
314 * interf.c (sim_open): Accept and ignore `--sysroot=...'.
316 2011-06-01 Joel Brobecker <brobecker@adacore.com>
318 * interf.c (sim_complete_command): New stub function.
320 2011-01-11 Andrew Burgess <aburgess@broadcom.com>
322 * interf.c (sim_store_register): Update return value to
325 2010-05-20 Joel Brobecker <brobecker@adacore.com>
327 * sis.h: Remove #include <stdint.h>.
328 (uint64, int64): Redefine without using stdint.h.
329 (UINT64_MAX): Define.
331 2010-04-20 Tiemen Schut <T.Schut@sron.nl>
333 * erc32.c (sis_memory_write): Change prototype to const unsigned char *.
334 * func.c (exec_cmd, event, advance_time, wait_for_irq): Use uint64
336 * interf.c (run_sim): Change icount to uint64_t. Use strtol directly.
337 (sim_resume): Specify maximum run time as uint64.
338 * sis.c (run_sim): Change icount to uint64_t.
339 * sis.h: Define uint64 as uint64_t. Change various fields and
340 prototypes to uint64 to support longer simulations.
342 2010-04-14 Mike Frysinger <vapier@gentoo.org>
344 * interp.c (sim_write): Add const to buf arg.
346 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
348 * configure: Regenerate.
350 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
352 * config.in: Regenerate.
353 * configure: Likewise.
355 * configure: Regenerate.
357 2008-11-10 Joel Sherrill <joel.sherrill@oarcorp.com>
359 * erc32.c, exec.c: Fix warnings.
361 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
363 * configure: Regenerate to track ../common/common.m4 changes.
366 2008-06-09 Joel Sherrill <joel.sherrill@oarcorp.com>
368 * sis.c: Correct spelling error.
370 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
371 Daniel Jacobowitz <dan@codesourcery.com>
372 Joseph Myers <joseph@codesourcery.com>
374 * configure: Regenerate.
376 2006-12-21 Hans-Peter Nilsson <hp@axis.com>
378 * acconfig.h: Remove.
379 * config.in: Regenerate.
381 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
383 * configure.ac: Add test for readline, substitute READLINE.
384 * Makefile.in (READLINE_LIB): New substituted-contents variable.
385 (SIM_EXTRA_LIBDEPS): Don't set.
386 (SIM_EXTRA_LIBS): Use $(READLINE_LIB) instead of
387 ../../readline/libreadline.a.
388 * configure: Regenerate.
390 2006-08-08 Daniel Jacobowitz <dan@codesourcery.com>
392 * Makefile.in (func.o, help.o): Correct dependencies.
394 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
396 * Makefile.in (install-sis): Honor DESTDIR.
398 2006-06-13 Richard Earnshaw <rearnsha@arm.com>
400 * configure: Regenerated.
402 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
404 * configure: Regenerated.
406 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
408 * configure: Regenerated.
410 2005-11-28 Mark Mitchell <mark@codesourcery.com>
412 * interf.c: (gdb/signals.h): Include it.
413 (sim_stop_reason): Use TARGET_SIGNAL_*.
415 2005-07-08 Ben Elliston <bje@au.ibm.com>
417 * func.c: Remove ANSI_PROTOTYPES conditional code.
419 2005-03-23 Mark Kettenis <kettenis@gnu.org>
421 * configure: Regenerate.
423 2005-03-07 Jerome Guitton <guitton@gnat.com>
425 * sim/erc32/float.c (set_fsr): Do not use deprecated multi-line
427 (clear_accex): Ditto.
428 * sim/erc32/interf.c: Remove the redeclaration of fprintf.
429 * sim/erc32/sis.c: Ditto.
430 * sim/erc32/exec.c: Add missing semicolon.
431 * sim/erc32/func.c: Remove definitions of generic_print_address,
432 generic_symbol_at_address, buffer_read_memory and perror_memory, as
433 they are already defined in opcodes/dis-buf.c.
435 2005-01-14 Andrew Cagney <cagney@gnu.org>
437 * configure.ac: Sinclude aclocal.m4 before common.m4. Add
438 explicit call to AC_CONFIG_HEADER.
439 * configure: Regenerate.
441 2005-01-12 Andrew Cagney <cagney@gnu.org>
443 * configure.ac: Update to use ../common/common.m4.
444 * configure: Re-generate.
446 2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
448 * configure: Regenerated to track ../common/aclocal.m4 changes.
450 2005-01-07 Andrew Cagney <cagney@gnu.org>
452 * configure.ac: Rename configure.in, require autoconf 2.59.
453 * configure: Re-generate.
455 2004-12-08 Hans-Peter Nilsson <hp@axis.com>
457 * configure: Regenerate for ../common/aclocal.m4 update.
459 2004-11-11 Andreas Schwab <schwab@suse.de>
461 * interf.c: Include "libiberty.h" instead of declaring buildargv
464 2003-02-27 Andrew Cagney <cagney@redhat.com>
466 * interf.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
468 2002-06-16 Andrew Cagney <ac131313@redhat.com>
470 * configure: Regenerated to track ../common/aclocal.m4 changes.
472 2002-06-08 Andrew Cagney <cagney@redhat.com>
474 * sis.h: Include "gdb/remote-sim.h" and "gdb/callback.h".
475 * interf.c: Include "gdb/remote-sim.h".
477 Tue May 23 21:39:23 2000 Andrew Cagney <cagney@b1.cygnus.com>
479 * configure: Regenerated to track ../common/aclocal.m4 changes.
481 2000-03-07 Frank Ch. Eigler <fche@redhat.com>
483 From John Dallaway <jld@redhat.co.uk>:
484 * Makefile.in (install-sis): Add $(EXEEXT) for Windows host.
486 2000-03-03 Jonathan Larmour <jlarmour@redhat.co.uk>
488 * func.c (buffer_read_memory): Change type of size to unsigned to
491 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
493 * configure: Regenerated to track ../common/aclocal.m4 changes.
495 1999-05-08 Felix Lee <flee@cygnus.com>
497 * configure: Regenerated to track ../common/aclocal.m4 changes.
499 1999-03-03 DJ Delorie <dj@cygnus.com>
501 * configure.in: add termcap and -luser32 for host=cygwin
502 * configure: regenerate
504 1999-02-11 Hugo Tyson <hmt@cygnus.co.uk>
506 * exec.c (dispatch_instruction):
507 Correct the sense of the
509 sregs->trap = TRAP_UNIMP;
512 clause that has been pasted around: it's correct in the SCAN and
513 DIVScc (divide step) cases (where it was probably originally
514 written?), but reversed in the SDIV, SDIVcc, UDIV, UDIVcc cases
515 ie. instructions only in the SPARC V8 or SPARClite 86x
516 architectures. It was also present when not required for SMUL,
517 SMULcc, UMUL, UMULcc instructions that are present in all
520 1999-01-25 Hugo Tyson <hmt@cygnus.co.uk>
522 * interf.c (run_sim): Fix a bug in the main loop's handling of
523 annulled delay slot instructions. There is precedent for this
524 change; the _other_ main loop in sis.c gets it right according to
525 my reading of the code.
527 The bug is: if an interrupt happens when the next instruction
528 (at sregs->pc) is annulled, the trap is taken (by execute_trap())
529 with the current values of PC and NPC, so when the trap returns,
530 the annulled instruction is indeed executed. Another giveaway is
531 that the annul flag is cleared in execute_trap(): the information
532 is demonstrably discarded.
534 The solution is: perform annulling before looking for traps, in
535 fact it's neater to do annulling, see if there's an interrupt and
536 if not, do the instruction, then handle traps be they generated by
537 interrupts pending or by the instruction we might just have done.
538 That's what the sis.c one does.
540 1999-01-20 Hugo Tyson <hmt@cygnus.co.uk>
542 * sis.h: Add asr17 register for support of SparcLITE (at least the
543 Hitachi ones I find before me)
545 * exec.c (dispatch_instruction): Case WRY: Allow write of asr17 if
546 sparclite. Other ASR numbers than 17 or 0 (Y) trap out.
547 Case RDY: Allow read of asr17 if sparclite. Other ASRs ditto.
548 (execute_trap): Do single-vector-trapping if asr17 bit 0 is set.
549 (init_regs): Initialize y and asr17.
550 NB: In instruction-set space, the Y register is asr0; the
551 instructions have different names for human reasons only.
554 * interf.c: Set boolean mode variable dumbio if invoked with
555 argument "-dumbio" and mention it of verbose.
556 * erc32.c: if "dumbio" is set, do not assume that there is a
557 terminal type device attached to stdin/stdout. Do not set
558 buffering or mess with tcsetattr or do any read operations in
559 order to make UART interrupts; not input data is supported.
560 This is necessary to allow the sim to be used within the eCos
561 testing infrastructure where stdin/stdout are pipes to a TCL
562 program; the sim hangs otherwise.
564 Thu Jul 23 07:17:03 1998 Mark Alexander <marka@cygnus.com>
566 * exec.c (dispatch_instruction): Add SPARClite 'scan' instruction.
568 Tue Jul 7 21:12:41 1998 Mark Alexander <marka@cygnus.com>
570 * func.c (bfd_load): Add special handling of a.out executables.
572 Sat Jun 13 08:33:25 1998 Mark Alexander <marka@cygnus.com>
574 * func.c (bfd_load): Print correct endianness.
575 * interf.c (run_sim): Print debugging information if verbosity level
577 (sim_open): Repeated -v options now increment verbosity level.
578 (sim_store_register): Handle little-endian case.
579 (flush_window): Print debugging information if verbosity level
582 Tue Jun 2 15:20:35 1998 Mark Alexander <marka@cygnus.com>
584 * interf.c (sim_open): Use revamped memory_read, which makes
585 byte-swapping unnecessary. Add -sparclite-board option for
586 emulating RAM found on typical SPARClite boards. Print
587 error message for unrecognized option.
588 * erc32.c: Change RAM address and size from constants to variables,
589 to allow emulation of SPARClite board RAM.
590 (fetch_bytes, store_bytes): New helper functions for revamped
591 mememory_read and memory_write.
592 (memory_read, memory_write): Rewrite to store bytes in target
593 byte order instead of storing words in host byte order; this
594 greatly simplifies support of little-endian programs.
595 (get_mem_ptr): Remove unnecessary byte parameter.
596 (sis_memory_write, sis_memory_read): Store words in target
597 byte order instead of host byte order.
598 (byte_swap_words): Remove, no longer needed.
599 * sis.h ((byte_swap_words): Remove declaration, no longer needed.
600 (memory_read): Add new sz parameter.
601 * sis.c (run_sim): Use revamped memory_read, which makes
602 byte-swapping unnecessary.
603 * exec.c (dispatch_instruction): Use revamped memory_read, which
604 makes byte-swapping and double-word fetching unnecessary.
605 * func.c (sparclite_board): Declare new variable.
606 (get_regi): Handle little-endian data.
607 (bfd_load): Recognize little-endian SPARClite as having
610 Fri May 22 14:23:16 1998 Mark Alexander <marka@cygnus.com>
612 * erc32.c (port_init): Print messages only if sis_verbose is true.
613 * func.c (bfd_load): Ditto.
614 * interf.c (sim_open): Ditto.
616 Thu May 14 23:10:48 1998 Mark Alexander <marka@cygnus.com>
618 * sis.h (uint64, int64): Define.
619 * exec.c (SDIV, SDIVCC, UDIV, UDIVCC): Define new opcodes.
620 * (mul64): Simplify calculation of negative result.
621 * (div64): New helper function for 64-bit division.
622 * (dispatch_instruction): Add emulation of SDIV, SDIVCC, UDIV,
625 Wed May 13 14:59:54 1998 Mark Alexander <marka@cygnus.com>
627 * erc32.c (close_port): Don't close stdin; it kills GDB.
628 (byte_swap_words): New function.
629 * sis.h: (byte_swap_words): Declare.
630 * interf.c (run_sim): Always fetch instructions as big-endian.
631 * sis.c (run_sim): Ditto.
633 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
635 * configure: Regenerated to track ../common/aclocal.m4 changes.
637 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
639 * configure: Regenerated to track ../common/aclocal.m4 changes.
642 Sun Apr 26 15:20:17 1998 Tom Tromey <tromey@cygnus.com>
644 * acconfig.h: New file.
645 * configure.in: Reverted change of Apr 24; use sinclude again.
647 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
649 * configure: Regenerated to track ../common/aclocal.m4 changes.
652 Fri Apr 24 11:19:52 1998 Tom Tromey <tromey@cygnus.com>
654 * configure.in: Don't call sinclude.
656 Sat Apr 18 12:00:16 1998 Mark Alexander <marka@cygnus.com>
658 * func.c (disp_fpu): Fix build problem on big-endian hosts.
660 Wed Apr 8 19:33:34 1998 Mark Alexander <marka@cygnus.com>
662 * erc32.c (sim_stop): Handle SIGINT gracefully.
663 * interf.c (sim_open): Don't catch SIGINT; GDB will do that for us.
665 Wed Apr 8 18:29:40 1998 Mark Alexander <marka@cygnus.com>
667 * exec.c (dispatch_instruction): Change how carry out is calculated
668 in DIVSCC. Add emulation of SMULCC, UMUL, and UMULCC.
670 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
672 * configure: Regenerated to track ../common/aclocal.m4 changes.
674 Wed Apr 1 21:19:18 1998 Mark Alexander <marka@cygnus.com>
676 * end.c: Update to version 2.7.5, fix compiler warnings and bugs.
686 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
688 * configure: Regenerated to track ../common/aclocal.m4 changes.
690 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
692 * configure: Regenerated to track ../common/aclocal.m4 changes.
694 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
696 * configure: Regenerated to track ../common/aclocal.m4 changes.
698 Tue Feb 17 12:41:11 1998 Andrew Cagney <cagney@b1.cygnus.com>
700 * interf.c (sim_store_register, sim_fetch_register): Pass in
701 length parameter. Return -1.
703 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
705 * configure: Regenerated to track ../common/aclocal.m4 changes.
707 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
709 * configure: Regenerated to track ../common/aclocal.m4 changes.
711 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
713 * configure: Regenerated to track ../common/aclocal.m4 changes.
715 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
717 * configure: Regenerated to track ../common/aclocal.m4 changes.
720 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
722 * configure: Regenerated to track ../common/aclocal.m4 changes.
724 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
726 * configure: Regenerated to track ../common/aclocal.m4 changes.
728 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
730 * configure: Regenerated to track ../common/aclocal.m4 changes.
732 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
734 * configure: Regenerated to track ../common/aclocal.m4 changes.
736 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
738 * configure: Regenerated to track ../common/aclocal.m4 changes.
740 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
742 * configure: Regenerated to track ../common/aclocal.m4 changes.
744 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
746 * configure: Regenerated to track ../common/aclocal.m4 changes.
748 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
750 * configure: Regenerated to track ../common/aclocal.m4 changes.
753 Tue Aug 26 10:38:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
755 * float.c (__setfpucw): Compile on any i386 target. Not just NT.
757 * interf.c (sim_kill): Delete.
758 (sim_create_inferior): Add ABFD argument. Initialize PC from ABFD
760 (sim_load): Don't save start address.
761 (start_address): Delete variable.
763 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
765 * configure: Regenerated to track ../common/aclocal.m4 changes.
768 Mon Aug 25 16:19:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
770 * interf.c (sim_open): Add ABFD argument. Change ARGV to PARGV.
772 Mon Jun 30 11:45:25 1997 Doug Evans <dje@canuck.cygnus.com>
774 * Makefile.in (install-sis): Change $(srcdir)/sis to sis.
776 Wed May 28 09:46:13 1997 Andrew Cagney <cagney@b1.cygnus.com>
778 * interf.c (sim_set_callbacks): Drop SD argument - not applicable.
779 (sim_open): Add callback arg, save it.
781 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
783 * configure: Regenerated to track ../common/aclocal.m4 changes.
785 Tue Apr 22 11:05:01 1997 Doug Evans <dje@canuck.cygnus.com>
787 * interf.c (sim_open): Undo patch to add -E support.
789 Thu Apr 17 03:03:56 1997 Doug Evans <dje@canuck.cygnus.com>
791 * interf.c (sim_open): Ignore -E arg.
792 (start_address): New static local.
793 (sim_load): Return SIM_RC. New arg abfd. Set start_address from bfd.
794 (sim_create_inferior): Return SIM_RC. Delete arg start_address.
796 Tue Apr 15 15:16:11 1997 Ian Lance Taylor <ian@cygnus.com>
798 * Makefile.in (install-sis): Depend upon installdirs. Use
799 $(program_transform_name) directly, rather than using
802 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
804 * configure: Regenerated to track ../common/aclocal.m4 changes.
807 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
809 * interf.c (sim_open): New arg `kind'.
811 * configure: Regenerated to track ../common/aclocal.m4 changes.
813 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
815 * configure: Regenerated to track ../common/aclocal.m4 changes.
817 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
819 * configure: Re-generate.
821 Thu Mar 13 12:46:04 1997 Doug Evans <dje@canuck.cygnus.com>
823 * interf.c (sim_open): New SIM_DESC result. Argument is now in
825 (other sim_*): New SIM_DESC argument.
827 Tue Feb 4 13:35:20 1997 Doug Evans <dje@canuck.cygnus.com>
829 * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
830 COMMON_{PRE,POST}_CONFIG_FRAG instead.
831 * configure.in: sinclude ../common/aclocal.m4.
832 * configure: Regenerated.
834 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
836 * configure configure.in Makefile.in: Update to new configure
837 scheme which is more compatible with WinGDB builds.
838 * configure.in: Improve comment on how to run autoconf.
839 * configure: Re-run autoconf to get new ../common/aclocal.m4.
840 * Makefile.in: Use autoconf substitution to install common
843 Wed Dec 4 18:25:04 1996 Rob Savoye <rob@chinadoll.cygnus.com>
845 * interf.c (run_sim): Stop the simulator and reset the stdio after
848 Tue Dec 3 11:54:37 1996 Rob Savoye <rob@chinadoll.cygnus.com>
850 * configure.in: Look for libtermcap.a.
851 * Makefile.in: Only link in -ltermcap if it exists.
852 * erc32.c: Update to version 2.6a. Fix uart handling.
853 * exec.c: Update to version 2.6a. Add sparclite support.
854 * float.c: Update to version 2.6a. Convert comments to
855 preprocessor warnings. Add __setfpucw() for i385 hosts so floating
856 point exceptions work on win32.
857 * func.c: Update to version 2.6a. Fix uart handling, add support
858 for user error traps.
859 * help.c: Update to version 2.6a. Add help note on user error
861 * interf.c: Update to version 2.6a. Fix uart handling, and add
863 * examples/gccx: Use sparclite cross compiler, not native gcc.
864 * examples/srt0.S: Use "mov" rather than "wr" for manipulating
867 Mon Nov 25 08:28:10 1996 Fred Fish <fnf@cygnus.com>
869 * Makefile.in (run.o): Remove this rule, it hides the one in
870 ../common/Make-common.in that correctly references the source
871 in the sibling ../common directory.
873 Wed Nov 20 01:30:12 1996 Doug Evans <dje@canuck.cygnus.com>
875 * Makefile.in: Delete stuff moved to ../common/Make-common.in.
876 (SIM_{OBJS,EXTRA_LIBS,EXTRA_LIBDEPS,EXTRA_ALL,EXTRA_INSTALL}): Define.
877 (SIM_{EXTRA_CLEAN,EXTRA_CFLAGS}): Define.
878 * configure.in: Simplify using macros in ../common/aclocal.m4.
879 Call AC_CHECK_HEADERS(stdlib.h).
880 * configure: Regenerated.
881 * config.in: New file.
882 * func.c (sim_set_callbacks): Delete, moved to
883 * interf.c (sim_set_callbacks): here.
884 (sim_callback): New global.
885 Rewrite all calls to printf_filtered to go through callback.
886 (sim_size,sim_trace): New functions.
887 (sim_{insert,remove}_breakpoint): #if 0 out.
888 * sis.c: #include "config.h". #include <stdlib.h> if present.
889 (main): Coerce fprintf arg to INIT_DISASSEMBLE_INFO to fprintf_ftype.
890 * sis.h: #include "callback.h".
891 * run.c: Deleted, using one in ../common now.
893 Thu Oct 3 16:12:03 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
895 * Makefile.in (clean): Move config.log to distclean.
897 Wed Oct 2 16:57:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
899 * Makefile.in (clean): Also remove config.log.
901 Sat Sep 14 00:00:46 1996 Ian Lance Taylor <ian@cygnus.com>
903 * Makefile.in (CC_FOR_BUILD): New variable.
904 (AR, AR_FLAGS, BISON, MAKEINFO): Remove duplicate variables.
905 (RANLIB, CC): Likewise.
906 (end): Use $(CC_FOR_BUILD), not $(CC).
907 * configure.in: Set CC_FOR_BUILD.
908 * configure: Rebuild.
910 Sun Sep 8 14:04:37 1996 Stu Grossman (grossman@critters.cygnus.com)
912 * erc32.c (port_init): Disable this for __GO32__ (got no pty's
915 Mon Aug 12 17:04:58 1996 Stu Grossman (grossman@critters.cygnus.com)
917 * erc32.c: Don't include sys/ioctl.h or sys/file.h. They aren't
919 * (port_init): Don't even *try* to open pty's under _WIN32.
920 * Use SIM_ADDR, not caddr_t for declaring vars that hold addresses.
921 * float.c: Get rid of #warning. Makes Microsoft C barf.
922 * interf.c (sim_open): Cast fprintf to (fprintf_ftype) to fix
924 * (sim_load sim_create_inferior sim_read): Use prototypes only in
926 * Get rid of enum sim_stop. It's defined in remote-sim.h.
927 * (sim_stop_reason): Define SIGTRAP if _WIN32.
928 * sis.h: Include ansidecl.h and remote-sim.h.
930 Wed Jul 3 16:05:23 1996 Stu Grossman (grossman@critters.cygnus.com)
932 * erc32.c (mec_reset mec_read mec_write memory_read memory_write),
933 sis.h: Get rid of all uses of long long's.
934 * (close_port read_uart write_uart uarta_tx): Don't seg fault
935 when can't open pty's.
936 * exec.c: Add two new instructions: smul, and divscc.
937 * interf.c (flush_windows): New routine to flush the register
938 windows out to the stack just before returning to GDB. Makes
939 backtraces work much better.
941 Wed Jun 26 12:19:11 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
943 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
944 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
945 (docdir, oldincludedir): Removed.
946 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
947 (AC_PROG_INSTALL): Added.
948 * configure: Rebuilt.
950 Mon Jun 24 14:19:07 1996 Ian Lance Taylor <ian@cygnus.com>
952 * configure.in: Call AC_PROG_CC before running configure.host.
953 * configure: Rebuild with autoconf 2.10.
955 Tue Jun 4 10:37:12 1996 Tom Tromey <tromey@csk3.cygnus.com>
957 * Makefile.in (install): Don't check to see if tooldir exists.
958 Make $(tooldir) and $(tooldir)/bin.
960 Mon Jun 3 12:33:38 1996 Ian Lance Taylor <ian@cygnus.com>
962 * Makefile.in (end.h): Use explicit ./ when running end.
964 Sun May 19 21:05:31 1996 Rob Savoye <rob@chinadoll.cygnus.com>
966 * func.c(bfd_load): Don't try to print the filename if the pfbd is
968 * interf.c(sim_load): Pass the whole string, not just the first
974 * Fixed bug in "go" command.
979 * Fixed bug in interrupt force register (erc32.c).
981 * Change file load function to use bfd_openr.
983 * SIS should now be endian independent.
988 * Fixed FPU timing - some sequences of FPU instructions did not calculate
989 the resource dependencies right.
991 * Corrected STDFQ when qne = 0 (again!). The ftt is set to sequence_error
992 but no FPU trap is generated.
994 version 1.7.1 31-10-95
997 * Corrected STDFQ when qne = 0. Now, a trap is immidiately generated but
998 the FPU stays in execute mode.
1000 * Corrected JMPL and RETT timing (these instructions takes two cycles).
1003 version 1.7 25-10-95
1004 --------------------
1006 * Interrupt during annuled instruction corrupted return address - fixed.
1009 version 1.6.2 25-10-95
1010 --------------------
1012 * Added -DFAST_UART to Makefile
1015 version 1.6.1 24-10-95
1016 --------------------
1018 * Fixed bug in STDFQ which caused bus error
1021 version 1.6 02-10-95
1022 --------------------
1024 * Modified srt0.s to include code that initiates registers in IU and FPU
1025 and initializes the data segment. The simulator 'load' command does not
1026 longer initialize the data segment!
1028 * Corrected MEC timer operation; scalers now divide the frequency by
1031 * MEC breakpoints are not checked during store operation
1034 version 1.5 14-09-95
1035 --------------------
1037 * Fixed some bugs in the cycle counting for IU & FPU instructions.
1039 * Fixed bug that allowed an annuled instruction to cause memory exception.
1041 * The *ws parameter in mem.c should now contain the number of waitstates
1042 required by the memory access (was total number of cycles).
1044 * The supplied srt0.s now clears the BSS (thanks Joel).
1046 version 1.4 22-08-95
1047 --------------------
1049 * Added a '-g' switch to enable/disable the GNU readline(), which cause
1050 some problems on solaris 2.x machines.
1052 * Enabled MEC watchpoint and breakpoint function to mem.c. Performance
1053 may suffer a bit ...
1055 NOTE: The UARTs are now connected to /dev/ttypc and /dev/ttypd.
1057 version 1.3 26-07-95
1058 --------------------
1060 * Fixed bug in mulscc instruction (how could that ever have worked?)
1062 * Fixed bug in UART B (flushed characters on UART A), thanks Paul.
1064 version 1.2 13-07-95
1065 --------------------
1067 * Fixed bug in interrupt handling (wrong interrupt selected when more that
1068 one interrupt pending)
1070 * Fixed updating of condition codes during logical instructions (carry and
1071 overflow were not reset)
1073 * Fixed bug in WRTBR (tt field was wrongly over-written)
1075 version 1.1 07-07-95
1076 --------------------
1078 * Fixed several bugs in the interrupt handler and callback routines.
1079 (reported by Paul Warren, Alsys)