1 2001-01-31 Nick Clifton <nickc@redhat.com>
3 * armvirt.c (PutWord): Detect installation of SWI vector.
4 (SWI_vector_installed): Define.
5 * armos.c (ARMul_OsInit): Reset SWI_vector_installed.
6 * armos.h (SWI_vector_installed): Declare.
7 * wrapper.c (SWI_vector_installed): Remove definition.
8 (sim_write): Remove check of SWI vector installation
10 2000-12-18 Nick Clifton <nickc@redhat.com>
12 * armemu.c (ARMul_Emulate26): Fix test for StoreDouble
15 2000-12-10 Nick Clifton <nickc@redhat.com>
17 * armos.c (ARMul_OSHandleSWI): Add 0x91 as an FPE SWI.
19 2000-12-07 Nick Clifton <nickc@redhat.com>
21 * armemu.c (ARMul_Emulate26): Detect double word load and
22 store instructions and call emulation routines.
23 (Handle_Load_Double): Emulate a double word load instruction.
24 (Handle_Store_Double): Emulate a double word store
27 2000-12-03 Nick Clifton <nickc@redhat.com>
29 * armos.c: Fix formatting.
30 (ARMul_OSHandleSWI): Suppress support of DEMON SWIs when in xscale
33 2000-11-29 Nick Clifton <nickc@redhat.com>
35 * armdefs.h (State): Add 'v5e' and 'xscale' fields.
36 (ARM_v5e_Prop): Define.
37 (ARM_XScale_Prop): Define.
39 * wrapper.c (sim_create_inferior): Select processor based on
41 (SWI_vector_installed): New boolean. Set to true if the SWI
42 vector address is written to by the executable.
44 * arminit.c (ARMul_NewState): Switch default to 32 bit mode.
45 (ARMul_SelectProcessor): Initialise v5e and xscale signals.
46 (ARMul_Abort): Fix calculation of LR address.
48 * armos.c (ARMul_OSHandleSWI): If a SWI vector has been installed
49 and a SWI is not handled by the simulator, pass the SWI off to the
50 vector, otherwise issue a warning message and continue.
52 * armsupp.c (ARMul_CPSRAltered): Set S bit aswell.
54 * thumbemu.c: Add v5 instruction simulation.
55 * armemu.c: Add v5, XScale and El Segundo instruction simulation.
57 * armcopro.c: Add XScale co-processor emulation.
58 * armemu.h: Add exported XScale co-processor functions.
60 2000-09-15 Nick Clifton <nickc@redhat.com>
62 * armdefs.h: Rename StrongARM property to v4_ARM and add v5 ARM
63 property. Delete unnecessary processor names.
64 (ARM_Strong_Prop): Delete.
68 (State): Delete is_StrongARM boolean. Add is_v4 and is_v5
71 * armemu.h (BUSUSEDINCPCS): Use is_v4 boolean.
72 (BUSUSEDINCPCN): Use is_v4 boolean.
74 * arminit.c (ARMul_NewState): Initialise is_v4 and is_v5 fields.
75 (ARMul_SelectProcessor): Change second parameter from 'processor'
76 to 'properties'. Set is_v4 and is_v5 booleans in State.
78 * armrdi.c: Remove use of ARM processor names. Replace with ARM
81 * wrapper.c (sim_create_inferior): Choose properties passed to
82 ARMul_SelectProcessor based on machine number.
84 2000-08-14 Nick Clifton <nickc@redhat.com>
86 * armemu.c (LHPOSTDOWN): Compute write back value before
87 performing load in case the offset register is overwritten.
90 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
92 * wrapper.c (sim_create_inferior): Fix typo in the previous patch.
94 2000-07-14 Fernando Nasser <fnasser@cygnus.com>
96 * wrapper.c (sim_create_inferior): Reset mode to ARM when creating a
99 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
101 * armvirt.c (ABORTS): Do not define.
103 * armdefs.h (struct ARMul_State): Add is_StrongARM.
104 (ARM_Strong_Prop, STRONGARM): Define.
105 * arminit.c (ARMul_NewState): Reset is_StrongARM.
106 (ARMul_SelectProcessor): Set is_StrongARM.
107 * wrapper.c (sim_create_inferior): Use bfd machine type to
108 determine processor type to emulate.
109 * armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC
110 when emulating StrongARM.
112 * armemu.c (ARMul_Emulate, t_undefined): Proceed to next insn.
114 * armemu.h (INSN_SIZE): New macro.
115 (SET_ABORT): Save CPSR in SPSR and set LR.
116 * armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE.
117 (WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode.
118 * arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE.
120 * armemu.c (LoadSMult): Use WriteR15() to discard the least
121 significant bits of PC.
123 * armemu.h (WRITEDESTB): New macro.
124 * armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to
125 modify PC. Moved the existing logic...
126 (WriteR15Branch): ... here. New function.
127 (WriteR15, WriteSR15): Drop the two least significant bits.
128 (LoadSMult): Use WriteR15Branch() to modify PC.
129 (LoadMult): Use WRITEDESTB() instead of WRITEDEST().
131 * armemu.h (GETSPSR): Call ARMul_GetSPSR().
132 * armsupp.c (ARMul_CPSRAltered): Zero out bits as they're
133 extracted from state->Cpsr, but preserve the unused bits.
134 (ARMul_GetCPSR): Get bits preserved in state->Cpsr.
135 (ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to
136 get the full CPSR word.
138 * armemu.h (PSR_FBITS, PSR_SBITS, PSR_XBITS, PSR_CBITS): New.
139 (SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros.
140 (SETPSR, SET_INTMODE, SETCC): Removed.
141 * armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit
142 mask. Use SETPSR_* to modify PSR.
143 (ARMul_SetCPSR): Load all bits from value.
144 * armemu.c (ARMul_Emulate, msr): Do not test bit mask.
146 * armemu.c (ARMul_Emulate): Compute writeback value before
147 loading, since the offset register may be the destination
150 * armdefs.h (SYSTEMBANK): Define as USERBANK.
151 * armsupp.c (ARMul_SwitchMode): Remove SYSTEMBANK cases.
153 2000-06-22 Alexandre Oliva <aoliva@cygnus.com>
155 * armemu.c (Multiply64): Fix computation of flag N.
157 * armemu.c (MultiplyAdd64): Fix computation of flag N.
159 2000-06-20 Alexandre Oliva <aoliva@cygnus.com>
161 * armemu.h (NEGBRANCH): Do not overwrite the two most significant
164 2000-05-25 Nick Clifton <nickc@cygnus.com>
166 * armcopro.c (MMUMCR): Only indicate mode change if a singal has
168 (MMUWrite): Only indicate mode change if a singal has really
171 * armdefs.h (SYSTEMMODE): Define.
172 (BANK_CAN_ACEESS_SPSR): Define.
174 * armemu.c (ARM_Emulate26): If the mode has changed allow the PC
175 to advance before stopping the emulation.
177 * arminit.c (ARMul_Reset): Ensure Mode field of State is set
180 * armos.c (ARMul_OSInit): Create a initial stack pointer for
183 * armsupp.c (ModeToBank): Remove unused first parameter.
184 Add support for System Mode.
185 (ARMul_GetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
186 (ARMul_SetSPSR): Use BANK_CAN_ACCESS_SPSR macro.
187 (ARMul_FixSPSR): Use BANK_CAN_ACCESS_SPSR macro.
188 (ARMulSwitchMode): Add support for System Mode.
190 Wed May 24 14:40:34 2000 Andrew Cagney <cagney@b1.cygnus.com>
192 * configure: Regenerated to track ../common/aclocal.m4 changes.
194 2000-05-23 Nick Clifton <nickc@cygnus.com>
196 * wrapper.c (sim_store_register): Special handling for CPSR
199 2000-03-11 Philip Blundell <philb@gnu.org>
201 * armemu.c (LoadSMult, LoadMult): Correct handling of aborts.
202 Patch from Allan Skillman <Allan.Skillman@arm.com>.
204 Wed Mar 22 15:24:21 2000 glen mccready <gkm@pobox.com>
206 * wrapper.c (sim_open,sim_close): Copy into myname, free myname.
208 2000-02-08 Nick Clifton <nickc@cygnus.com>
210 * wrapper.c: Fix compile time warning messages.
211 * armcopro.c: Fix compile time warning messages.
212 * armdefs.h: Fix compile time warning messages.
213 * armemu.c: Fix compile time warning messages.
214 * armemu.h: Fix compile time warning messages.
215 * armos.c: Fix compile time warning messages.
216 * armsupp.c: Fix compile time warning messages.
217 * armvirt.c: Fix compile time warning messages.
218 * bag.c: Fix compile time warning messages.
220 2000-02-02 Bernd Schmidt <bernds@cygnus.co.uk>
222 * *.[ch]: Use indent to make readable.
224 1999-11-22 Nick Clifton <nickc@cygnus.com>
226 * armos.c (SWIread): Generate an error message if a huge read is
228 (SWIwrite): Generate an error message if a huge write is
231 1999-10-27 Nick Clifton <nickc@cygnus.com>
233 * thumbemu.c (ARMul_ThumbDecode): Accept 0xbebe as a thumb
236 1999-10-08 Ulrich Drepper <drepper@cygnus.com>
238 * armos.c (SWIopen): Always pass third parameter with 0666 since
239 otherwise uninitialized memory gets access if the O_CREAT bit is
240 set and so we possibly cannot access the file afterwards.
242 1999-09-29 Doug Evans <devans@casey.cygnus.com>
244 * armos.c (SWIWrite0): Send output to stdout instead of stderr.
245 (ARMul_OSHandleSWI, case SWI_WriteC,AngelSWI_Reason_WriteC): Ditto.
247 Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com>
249 * configure: Regenerated to track ../common/aclocal.m4 changes.
251 1999-05-08 Felix Lee <flee@cygnus.com>
253 * configure: Regenerated to track ../common/aclocal.m4 changes.
255 1999-04-06 Keith Seitz <keiths@cygnus.com>
257 * wrapper.c (stop_simulator): New global.
258 (sim_stop): Set sim state to STOP and set
260 (sim_resume): Reset stop_simulator.
261 (sim_stop_reason): If stop_simulator is set, tell gdb
262 that the we took SIGINT.
263 * armemu.c (ARMul_Emulate26): Don't loop forever. Stop if
264 stop_simulator is set.
266 1999-04-02 Keith Seitz <keiths@cygnus.com>
268 * armemu.c (ARMul_Emulate26): If NEED_UI_LOOP_HOOK, call ui_loop_hook
269 whenever the counter expires.
270 * Makefile.in (SIM_EXTRA_CFLAGS): Include define NEED_UI_LOOP_HOOK.
272 1999-03-24 Nick Clifton <nickc@cygnus.com>
274 * armemu.c (ARMul_Emulate26): Handle new breakpoint value.
275 * thumbemu.c (ARMul_ThumbDecode): Handle new breakpoint value.
277 Mon Sep 14 09:00:05 1998 Nick Clifton <nickc@cygnus.com>
279 * wrapper.c (sim_open): Set endianness according to BFD or command
282 * tconfig.in: Define SIM_HAVE_BIENDIAN.
284 Thu Aug 27 11:00:05 1998 Nick Clifton <nickc@cygnus.com>
286 * armemu.c (Multiply64): Test for Rm (rather than Rs) not being
287 the same as either RdHi or RdLo.
289 Thu Jul 2 10:24:35 1998 Nick Clifton <nickc@cygnus.com>
291 * armos.c (ARMul_OSHandleSWI: AngelSWI_Reason_ReportException):
292 Set Reg[0] based on reason for for the exception.
294 Thu Jun 4 15:22:03 1998 Jason Molenda (crash@bugshack.cygnus.com)
296 * armos.c (SWIwrite0): New function.
297 (WriteCommandLineTo): New function.
298 (SWIopen): New function.
299 (SWIread): New function.
300 (SWIwrite): New function.
301 (SWIflen): New function.
302 (ARMul_OSHandleSWI): Call new functions instead of handling
304 (ARMul_OSHandleSWI): Handle Angel SWIs correctly.
305 (*): Reformat spacing to be a bit more GNUly.
306 Most code taken from a patch by Anthony Thompson
307 (athompso@cambridge.arm.com)
309 Tue Jun 2 15:22:22 1998 Nick Clifton <nickc@cygnus.com>
311 * armos.h: Add Angel SWI and its reason codes.
312 * armos.c (ARMul_OSHandleSWI): Ignore Angel SWIs (for now).
314 Mon Jun 1 17:14:19 1998 Anthony Thompson (athompso@cambridge.arm.com)
316 * armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case
317 of ":tt" to catch stdin in addition to stdout.
318 (ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure
319 or success of lseek().
321 Wed May 20 17:36:25 1998 Nick Clifton <nickc@cygnus.com>
323 * armos.c (ARMul_OSHandleSWI): Special case code to catch attempts
326 Wed Apr 29 15:29:55 1998 Jeff Johnston <jjohnstn@cygnus.com>
328 * armos.c (ARMul_OSHandleSWI): Added code for SWI_Clock,
329 SWI_Flen, and SWI_Time. Also fixed SWI_Seek code to only
330 seek from offset 0 and not to use R2 for whence since it is
331 not passed as part of the SWI call.
333 Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com>
335 * configure: Regenerated to track ../common/aclocal.m4 changes.
337 Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche>
339 * configure: Regenerated to track ../common/aclocal.m4 changes.
342 Sun Apr 26 15:20:26 1998 Tom Tromey <tromey@cygnus.com>
344 * acconfig.h: New file.
345 * configure.in: Reverted change of Apr 24; use sinclude again.
347 Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche>
349 * configure: Regenerated to track ../common/aclocal.m4 changes.
352 Fri Apr 24 11:20:19 1998 Tom Tromey <tromey@cygnus.com>
354 * configure.in: Don't call sinclude.
356 Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com>
358 * configure: Regenerated to track ../common/aclocal.m4 changes.
360 Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com>
362 * configure: Regenerated to track ../common/aclocal.m4 changes.
364 Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com>
366 * configure: Regenerated to track ../common/aclocal.m4 changes.
368 Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com>
370 * configure: Regenerated to track ../common/aclocal.m4 changes.
372 Tue Mar 10 09:26:38 1998 Nick Clifton <nickc@cygnus.com>
374 * armopts.h: Remove definition of LITTLEND - it is not used.
376 Tue Feb 17 12:35:54 1998 Andrew Cagney <cagney@b1.cygnus.com>
378 * wrapper.c (sim_store_register, sim_fetch_register): Pass in
379 length parameter. Return -1.
381 Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com>
383 * configure: Regenerated to track ../common/aclocal.m4 changes.
385 Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com>
387 * configure: Regenerated to track ../common/aclocal.m4 changes.
389 Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba>
391 * configure: Regenerated to track ../common/aclocal.m4 changes.
393 Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com>
395 * configure: Regenerated to track ../common/aclocal.m4 changes.
398 Tue Dec 9 11:30:48 1997 Nick Clifton <nickc@cygnus.com>
400 * Makefile.in: Updated with changes from branch.
402 * armemu.c: ditto these changes
403 * armemu.h: ditto add support for
404 * armos.c: ditto the Thumb instruction
405 * armsupp.c: ditto set and the new v4
406 * armvirt.c: ditto architecture.
408 * thumbemu.c: New file from branch.
411 Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com>
413 * configure: Regenerated to track ../common/aclocal.m4 changes.
415 Thu Oct 30 13:54:06 1997 Nick Clifton <nickc@cygnus.com>
417 * armos.c (ARMul_OSHandleSWI): Add support for GetEnv SWI. Patch
418 from Tony Thompson at ARM: athompso@arm.com
420 * wrapper.c (sim_create_inferior): Add code to create an execution
421 environment. Patch from Tony Thompson at ARM: athompso@arm.com
423 Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
425 * wrapper.c (sim_load): Pass lma_p and sim_write args to
428 Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com>
430 * configure: Regenerated to track ../common/aclocal.m4 changes.
432 Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com>
434 * configure: Regenerated to track ../common/aclocal.m4 changes.
436 Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com>
438 * configure: Regenerated to track ../common/aclocal.m4 changes.
440 Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com>
442 * configure: Regenerated to track ../common/aclocal.m4 changes.
444 Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
446 * configure: Regenerated to track ../common/aclocal.m4 changes.
448 Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com>
450 * configure: Regenerated to track ../common/aclocal.m4 changes.
452 Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba>
454 * configure: Regenerated to track ../common/aclocal.m4 changes.
456 Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
458 * configure: Regenerated to track ../common/aclocal.m4 changes.
461 Tue Aug 26 10:37:27 1997 Andrew Cagney <cagney@b1.cygnus.com>
463 * wrapper.c (sim_kill): Delete.
464 (sim_create_inferior): Add ABFD argument.
465 (sim_load): Move setting of PC from here.
466 (sim_create_inferior): To here.
468 Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com>
470 * configure: Regenerated to track ../common/aclocal.m4 changes.
473 Mon Aug 25 15:35:45 1997 Andrew Cagney <cagney@b1.cygnus.com>
475 * wrapper.c (sim_open): Add ABFD argument.
477 Tue May 20 10:13:26 1997 Andrew Cagney <cagney@b1.cygnus.com>
479 * wrapper.c (sim_open): Add callback argument.
480 (sim_set_callbacks): Drop SIM_DESC argument.
482 Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com>
484 * configure: Regenerated to track ../common/aclocal.m4 changes.
486 Fri Apr 18 13:32:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
488 * wrapper.c (sim_stop): Stub sim_stop function.
490 Thu Apr 17 18:33:01 1997 Fred Fish <fnf@cygnus.com>
492 * arminit.c (ARMul_NewState): Preinitialize the state to
495 Thu Apr 17 02:39:02 1997 Doug Evans <dje@canuck.cygnus.com>
497 * Makefile.in (SIM_OBJS): Add sim-load.o.
498 * wrapper.c (sim_kind,myname): New static locals.
499 (sim_open): Set sim_kind, myname.
500 (sim_load): Call sim_load_file to do work. Set start address from bfd.
501 (sim_create_inferior): Return SIM_RC. Delete start_address arg.
503 Thu Apr 17 11:48:25 1997 Andrew Cagney <cagney@b1.cygnus.com>
505 * wrapper.c (sim_trace): Update so that it matches prototype.
507 Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
509 * configure: Regenerated to track ../common/aclocal.m4 changes.
512 Mon Apr 7 12:01:17 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
514 * Makefile.in (armemu32.o): Replace $< with autoconf recommended
518 Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com>
520 * wrapper.c (sim_open): New arg `kind'.
522 * configure: Regenerated to track ../common/aclocal.m4 changes.
524 Wed Apr 2 14:50:44 1997 Ian Lance Taylor <ian@cygnus.com>
526 * COPYING: Update FSF address.
528 Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
530 * configure: Regenerated to track ../common/aclocal.m4 changes.
532 Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
534 * configure: Regenerated to track ../common/aclocal.m4 changes.
536 Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
538 * configure: Re-generate.
540 Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com>
542 * configure: Regenerate to track ../common/aclocal.m4 changes.
544 Thu Mar 13 12:38:56 1997 Doug Evans <dje@canuck.cygnus.com>
546 * wrapper.c (sim_open): Has result now.
547 (sim_*): New SIM_DESC argument.
549 Tue Feb 4 13:22:21 1997 Doug Evans <dje@canuck.cygnus.com>
551 * Makefile.in (@COMMON_MAKEFILE_FRAG@): Use
552 COMMON_{PRE,POST}_CONFIG_FRAG instead.
553 * configure.in: sinclude ../common/aclocal.m4.
554 * configure: Regenerated.
556 Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
558 * configure configure.in Makefile.in: Update to new configure
559 scheme which is more compatible with WinGDB builds.
560 * configure.in: Improve comment on how to run autoconf.
561 * configure: Re-run autoconf to get new ../common/aclocal.m4.
562 * Makefile.in: Use autoconf substitution to install common
565 Wed Nov 20 01:05:10 1996 Doug Evans <dje@canuck.cygnus.com>
567 * run.c: Deleted, use one in ../common now.
568 * Makefile.in: Delete everything that's been moved to
569 ../common/Make-common.in.
571 * configure.in: Simplify using macros in ../common/aclocal.m4.
572 * configure: Regenerated.
573 * config.in: New file.
574 * armos.c: #include config.h.
575 * wrapper.c (mem_size): Value is in bytes now.
576 (sim_callback): New global.
577 (arm_sim_set_profile{,_size}): Delete.
578 (arm_sim_set_mem_size): Rename to sim_size.
579 (sim_do_command): Call printf_filtered via callback.
580 (sim_set_callbacks): Record callback.
582 Thu Oct 3 16:10:27 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
584 * Makefile.in (mostlyclean): Remove config.log.
586 Wed Jun 26 12:17:24 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
588 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
589 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
591 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
592 (AC_PROG_INSTALL): Added.
593 * configure: Rebuilt.
595 Wed Feb 21 12:14:31 1996 Ian Lance Taylor <ian@cygnus.com>
597 * configure: Regenerate with autoconf 2.7.
599 Fri Dec 15 16:27:30 1995 Ian Lance Taylor <ian@cygnus.com>
601 * run.c (main): Use new bfd_big_endian macro.
603 Mon Nov 20 17:40:38 1995 Doug Evans <dje@canuck.cygnus.com>
605 * run.c: Include "getopt.h".
607 (usage): Make static.
608 (main): Call arm_sim_set_verbosity.
609 Only load sections marked SEC_LOAD.
610 * wrapper.c (mem_size, verbosity): New static global.
611 (arm_sim_set_mem_size): Renamed from sim_size. Callers updated.
612 (arm_sim_set_profile{,_size}): Renamed from sim_foo. Callers updated.
614 Fri Nov 17 19:35:11 1995 Doug Evans <dje@canuck.cygnus.com>
616 * armdefs.h (ARMul_State): New member `verbose'.
617 * armrdi.c (ARMul_ConsolePrint): Add missing va_end.
618 * run.c (verbose): Make global.
619 * wrapper.c (init): Set state->verbose.
620 (ARMul_ConsolePrint): Don't print anything if !verbose.
622 Fri Oct 13 15:30:30 1995 Doug Evans <dje@canuck.cygnus.com>
624 * armos.c: #include dbg_rdi.h.
625 (ARMul_OSHandleSWI): Handle SWI_Breakpoint.
626 * armos.h (SWI_Breakpoint): Define.
627 * wrapper.c: #include armemu.h, dbg_rdi.h.
629 (sim_resume): Use state->EndCondition to record stop state.
630 Call FLUSHPIPE before returning.
631 (sim_stop_reason): Determine reason from state->EndCondition.
633 Fri Oct 13 15:04:05 1995 steve chamberlain <sac@slash.cygnus.com>
635 * wrapper.c (sim_set_callbacks): New.
637 Thu Sep 28 19:45:56 1995 Doug Evans <dje@deneb.cygnus.com>
639 * armos.c (ARMul_OSHandleSWI): Result of read/write calls is
640 number of bytes not read/written (or -1).
642 Wed Sep 20 13:35:54 1995 Ian Lance Taylor <ian@cygnus.com>
644 * Makefile.in (maintainer-clean): New synonym for realclean.
646 Fri Sep 8 14:27:20 1995 Ian Lance Taylor <ian@cygnus.com>
648 * configure.in: Remove AC_PROG_INSTALL.
649 * configure: Rebuild.
650 * Makefile.in (INSTALL): Revert to using install.sh.
651 (INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL).
652 (INSTALL_XFORM, INSTALL_XFORM1): Restore.
653 (mostlyclean): Make the same as clean, not distclean.
654 (clean): Remove config.log.
655 (install): Don't install in $(tooldir).
657 Thu Sep 7 12:00:17 1995 Doug Evans <dje@canuck.cygnus.com>
659 (Try to) Update to new bfd autoconf scheme.
660 * run.c: Don't include sysdep.h.
661 * Makefile.in (INSTALL{,_PROGRAM,_DATA}): Use autoconf computed value.
662 (CC, CFLAGS, AR, RANLIB): Likewise.
663 (HDEFINES, TDEFINES): Define.
664 (CC_FOR_BUILD): Delete.
665 (host_makefile_frag): Delete.
666 (Makefile): Don't depend on frags.
667 * configure.in (sysdep.h): Don't create symlink.
668 (host_makefile_frag, frags): Deleted.
669 (CC, CFLAGS, AR, RANLIB, INSTALL): Compute values.
670 * configure: Regenerated.
672 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
674 * Update all FSF addresses except those in COPYING* files.
676 Wed Jul 5 16:15:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
678 * Makefile.in (clean): Remove run, libsim.a.
680 * Makefile.in, configure.in: converted to autoconf.
681 * configure: New file, generated with autconf 2.4.
685 Fri Jun 30 16:49:47 1995 Stan Shebs <shebs@andros.cygnus.com>
687 * wrapper.c (sim_do_command): New function.
689 Tue Jun 13 10:57:32 1995 Steve Chamberlain <sac@slash.cygnus.com>
691 * armos.c (ARMul_OSHandleSWI): New version to work with
694 Thu Jun 8 14:37:14 1995 Steve Chamberlain <sac@slash.cygnus.com>
696 * run.c (main): Grab return value from right register.
698 Wed May 24 14:37:31 1995 Steve Chamberlain <sac@slash.cygnus.com>