1 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
3 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
4 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
5 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
6 2.6.27. Set machine field to the BFD printable name of the
9 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
10 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
13 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
14 (TARGET_X_OK, TARGET_F_OK): Define.
15 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
17 * cris/semcrisv32f-switch.c: Regenerate.
19 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
21 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
22 just a short CRIS-specific notice. Tweak the wording for a
23 failing architecture test.
25 * cris/traps.c (TARGET_SYS_writev): New macro.
26 (is_mapped_only, cris_dump_map): New functions.
27 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
28 and prot combinations and a non-zero page-offset. If
29 TARGET_MAP_FIXED, unmap pages before mapping them.
30 <case TARGET_SYS_mprotect>: When checking, allow any length
31 argument. Don't actually do anything.
32 <case TARGET_SYS_writev>: New case.
34 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
35 * cris/sim-if.c: Include elf-bfd.h.
36 (struct progbounds): New members end_loadmem, start_nonloadmem.
37 (xprintf, eprintf): New functions, copied from common/sim-load.c.
38 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
39 (get_progbounds_iterator): Renamed from get_progbounds. Make
40 static. Update head comment. Set new struct progbounds members.
41 (exec_load_addr, interp_load_addr, interp_start_addr): New static
43 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
44 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
46 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
47 handling to use auxv_entries. Improve error message and checking
48 for invalid programs. Use new variable abfd for the program
49 instead of for each access reaching into sd to get it.
50 (sim_create_inferior): If non-zero, use interp_start_addr instead
51 of the program start address.
52 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
53 stale comment. Always specify little-endian.
55 2008-07-29 Nick Clifton <nickc@redhat.com>
57 * common/genmloop.sh: Add new parameter: -shell to specify the
58 command interpreter to use to run the input file. This is
59 necessary because otherwise SHELL is taken from the user's
60 environment, and not from the makefile that invoked this script
61 and the user might not be running an sh-like shell.
62 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
63 * fr30/Makefile.in: Likewise.
64 * frv/Makefile.in: Likewise.
65 * i960/Makefile.in: Likewise.
66 * iq2000/Makefile.in: Likewise.
67 * m32r/Makefile.in: Likewise.
69 * frv/mloop.in: Add missing start of line comment marker.
71 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
73 * cris/configure: Regenerate to track ../common/common.m4 changes.
74 * cris/config.in: Ditto.
76 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
77 Daniel Jacobowitz <dan@codesourcery.com>
78 Joseph Myers <joseph@codesourcery.com>
80 * cris/configure: Regenerate.
82 2008-05-09 Olivier Hainque <hainque@adacore.com>
84 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
86 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
88 * MAINTAINERS: Add myself as maintainer of cr16 port.
90 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
92 Add simulator for National cr16 processor.
93 * cr16: New directory.
94 * configure.ac: Add entry for National cr16.
95 * configure: Regenerate.
97 2008-02-05 DJ Delorie <dj@redhat.com>
99 * configure.ac (v850): V850 now has a testsuite.
100 * configure (v850): Likewise.
102 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
104 Updated copyright notices for most files.
106 2007-12-19 DJ Delorie <dj@redhat.com>
108 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
111 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
113 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
114 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
115 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
116 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
117 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
118 cris/semcrisv32f-switch.c: Regenerate.
120 2007-08-24 Joel Brobecker <brobecker@adacore.com>
122 Switch the license of all files explicitly copyright the FSF
125 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
127 * Makefile.in: Add dummy "pdf" target.
129 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
131 * cris/traps.c (dump_statistics): Change format for cycle numbers
132 to %llu and cast parameters to unsigned long long.
134 2007-02-16 Thiemo Seufer <ths@mips.com>
136 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
138 2007-01-28 Manuel Lauss <slauss@resi.at>
140 * configure.ac (sh64-*-*): Change to sh64*-*-*.
141 (sh-*-*): Change to sh*-*-*.
142 * configure: Regenerated.
144 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
146 Updated copyright notices for most files.
148 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
150 * Makefile.in (autoconf-common autoheader-common): Only run
151 autoheader on subdirs with a file config.in.
153 * configure.ac (common): Make the default "yes" for all targets
155 * configure: Regenerate.
157 * Makefile.in (autoconf-common autoheader-common): In documented
158 usage, say SHELL=/bin/sh.
159 (.PHONY): Add autoheader-common.
161 * MAINTAINERS: Add self as authorized committer for *.
163 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
164 Hans-Peter Nilsson <hp@axis.com>
166 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
167 (cris_unknown_syscall_action): Declare.
168 * cris/sim-if.c (cris_unknown_syscall_action): Define.
169 (cris_options): Add cris-unknown-syscall option.
170 (cris_option_handler): Correct comment about and error message for
171 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
172 * cris/traps.c: Include stdarg.h
173 (cris_unknown_syscall): New function.
174 (cris_break_13_handler): Instead of sim_io_eprintf and
175 sim_engine_halt, call cris_unknown_syscall to handle more or less
176 unknown syscalls. Adjust code as necessary to handle return
179 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
181 * MAINTAINERS: Add Dave Brolley for sh64.
183 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
185 * cris/traps.c (TARGET_PIPE_BUF): New macro.
186 (cris_pipe_empty): Correct initialization of "remaining". Only
187 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
190 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
192 * cris/configure.ac: Check for limits.h and sys/param.h.
193 * cris/configure, cris/config.in: Rebuild.
194 * cris/traps.c (SIM_PATHMAX): New macro.
195 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
197 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
199 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
200 * Makefile.in (FLAGS_TO_PASS): Include libdir.
201 * configure: Regenerated.
203 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
205 * cris/configure: Regenerated.
207 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
209 * cris/configure: Regenerated.
211 2006-05-05 Andreas Schwab <schwab@suse.de>
213 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
214 * configure: Regenerate.
216 * Makefile.in (CFLAGS_FOR_BUILD): Define.
217 (CC_FOR_BUILD): Don't override.
218 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
220 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
222 * MAINTAINERS: Add an "Authorized committers" section, and list
225 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
227 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
229 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
231 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
232 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
233 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
234 (all): Depend on rvdummy$(EXEEXT).
235 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
236 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
238 * cris/configure: Regenerate.
239 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
240 (enum cris_interrupt_type, crisv10deliver_interrupt)
241 (crisv32deliver_interrupt: New declarations.
242 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
243 sim_events_tickn and set state-events member work_pending when it's
244 time for the next event.
245 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
246 interrupt-delivery function.
247 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
248 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
249 * cris/devices.c: Include hw-device.h.
250 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
251 (device_io_write_buffer): Only perform 0x900000xx-functions if
252 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
253 call hw_io_write_buffer. Add return 0 last in function.
254 * cris/sim-if.c (cris_have_900000xxif): Now global.
255 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
256 Force "-model" option, effectively.
257 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
258 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
260 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
262 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
263 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
264 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
266 2006-03-13 DJ Delorie <dj@redhat.com>
268 * MAINTAINERS: Add self as m32c sim maintainer.
270 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
272 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
274 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
276 2006-01-23 Jim Blandy <jimb@redhat.com>
278 Add simulator for Renesas M32C and M16C.
280 * m32c: New directory.
281 * configure.ac: Add entry for Renesas M32C.
282 * configure: Regenerate.
284 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
286 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
287 cycle count for the current insn.
289 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
291 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
292 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
293 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
294 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
296 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
298 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
299 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
300 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
301 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
302 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
303 cris/semcrisv32f-switch.c: Regenerate.
305 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
307 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
308 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
310 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
311 F_GETFL on fd 0, 1 and 2.
313 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
315 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
316 last_open_fd, last_open_flags.
317 * cris/traps.c: Don't include targ-vals.h.
318 (TARGET_O_ACCMODE): Define.
319 (cris_break_13_handler): Set new _sim_cpu members.
320 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
321 Rearrange code as switch. Emit "unimplemented" abort for
322 unimplemented fcntl calls.
324 * cris/traps.c (TARGET_SYS_stat): Define.
325 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
326 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
328 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
330 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
331 low 32 bits are used after an unsigned long cast.
333 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
335 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
337 2005-05-26 Chris Demetriou <cgd@netbsd.org>
339 * MAINTAINERS: Update my mail address, move myself to the
340 "Past maintainers" section.
342 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
344 * configure.ac: Add igen to v850 build.
345 * configure: Regenerate.
347 2005-04-29 Paul Brook <paul@codesourcery.com>
349 * common/callback.c (PIPE_BUF): Provide default definition.
350 (os_lstat): Use stat if lstat is not available on the host.
351 (os_ftruncate): Return EINVAL if not available on the host.
352 (os_truncate): Ditto.
353 * common/configure.ac: Check for lstat, truncate and ftruncate.
354 * common/configure: Regenerate.
355 * common/config.in: Regenerate.
357 2005-04-27 Paul Brook <paul@codesourcery.com>
359 * common/Make-common.in: Add $(EXEEXT) to "run".
361 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
363 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
364 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
365 implemented. In call to create_map, pad length argument to 8k.
367 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
369 * configure.ac: Add explicit sh64 case.
370 * configure: Regenerate.
372 2005-03-30 Paul Brook <paul@codesourcery.com>
374 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
376 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
378 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
379 include cgen-ops.h in decodev10.c and decodev32.c.
380 * cris/sim-main.h: Don't include cgen-ops.h here.
381 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
382 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
383 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
384 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
385 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
386 cris/semcrisv32f-switch.c: Regenerate.
388 * cris/traps.c (cris_break_13_handler) <case
389 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
390 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
392 2005-03-23 Mark Kettenis <kettenis@gnu.org>
394 * cris/configure: Regenerate.
396 2005-02-28 Jim Blandy <jimb@redhat.com>
398 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
399 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
400 Regenerated, after change to common/aclocal.m4.
402 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
404 * iq2000: New target subdirectory.
405 * configure.ac: Add iq2000 target.
406 * configure: Regenerate.
408 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
410 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
411 (realclean, install): Fail if subdir make failed.
413 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
415 * cris: New directory, simulator for Axis Communications CRIS
416 including CRIS v32, CGEN-based.
417 * configure.ac: Add corresponding configury.
418 * configure: Regenerate.
420 2005-01-17 Andrew Cagney <cagney@gnu.org>
422 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
423 common directory. Remove sparc*-*-* from list.
425 2005-01-11 Andrew Cagney <cagney@gnu.org>
427 * Makefile.in (autoconf-common autoheader-common): Add --force to
428 autoconf and autoheader.
429 (autoconf-common autoheader-common)
430 (autoconf-install autoheader-install): Check for configure.ac, not
432 * configure.ac: Delete AC_CONFIG_AUX_DIR.
433 * configure: Re-generate.
435 2005-01-07 Andrew Cagney <cagney@gnu.org>
437 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
438 correctly calls AC_CONFIG_SUBDIRS.
439 * configure: Re-generate.
441 2004-12-01 Andrew Cagney <cagney@gnu.org>
443 * i960, h8500: Delete directory.
445 2004-11-12 Andrew Cagney <cagney@gnu.org>
447 * d30v, fr30, mn10200, z8k: Delete directory.
449 2004-03-10 Ben Elliston <bje@gnu.org>
451 * MAINTAINERS: Update my mail address.
453 2004-01-26 Chris Demetriou <cgd@broadcom.com>
455 * configure.in (mips*-*-*): Configure in testsuite.
456 * configure: Regenerate.
458 2003-10-08 Dave Brolley <brolley@redhat.com>
460 * configure.in: Move frv handling to alphabetically correct placement.
462 2003-09-03 Andreas Schwab <schwab@suse.de>
464 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
466 2003-08-29 Dave Brolley <brolley@redhat.com>
468 * MAINTAINERS: Add myself as maintainer of the FRV port.
470 2003-08-20 Michael Snyder <msnyder@redhat.com>
471 Dave Brolley <brolley@redhat.com>
473 * frv/: New directory, simulator for the Fujitsu FRV.
474 * configure.in: Add frv configury.
475 * configure: Regenerate.
477 2003-08-10 Ben Elliston <bje@wasabisystems.com>
479 * MAINTAINERS: Update my mail address.
481 2003-08-09 Andrew Cagney <cagney@redhat.com>
483 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
484 maintenance. List igen and sh maintainers. Mention that target
485 and global maintainers pick up the slack.
487 2003-07-09 Michael Snyder <msnyder@redhat.com>
489 * configure.in: Add testsuite to extra_subdirs for sh.
490 * configure: Regenerate.
492 2003-01-23 Nick Clifton <nickc@redhat.com>
496 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
498 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
500 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
502 * MAINTAINERS: Update my email address.
504 2002-07-17 Andrew Cagney <ac131313@redhat.com>
506 * w65/: Delete directory.
508 2002-07-16 Andrew Cagney <ac131313@redhat.com>
510 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
511 * configure: Re-generate.
513 2002-07-13 Andrew Cagney <ac131313@redhat.com>
515 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
516 * configure: Re-generate.
518 2002-06-16 Andrew Cagney <ac131313@redhat.com>
520 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
521 id, date and host to be overriden by NAME, ID, DATE and HOST
522 respectfully. Use ISO dates.
524 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
526 * Makefile.in (ChangeLog): New makefile variable.
527 * README-HACKING: Mention the ChangeLog makefile variable.
529 2002-06-01 Andrew Cagney <ac131313@redhat.com>
531 * tic80/: Delete directory.
533 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
535 * MAINTAINERS: Update my email address.
537 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
539 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
541 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
543 * MAINTAINERS: Record self as a co-maintainer of just common/.
545 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
547 * MAINTAINERS: Point to GDB files describing overall maintaince
548 and check-in procedures.
550 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
552 * MAINTAINERS: Add myself for ARM portions.
554 2001-10-19 Andrew Cagney <ac131313@redhat.com>
556 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
557 * configure: Re-generate.
559 2001-02-16 Ben Elliston <bje@redhat.com>
561 * MAINTAINERS: Add myself for common portions.
563 2001-01-15 Chris Demetriou <cgd@broadcom.com>
565 * MAINTAINERS: Added self and Andrew for the mips sim.
567 2000-10-25 Geoff Keating <geoffk@cygnus.com>
569 * MAINTAINERS: Added self and Andrew for the ppc sim.
571 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
573 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
574 * m68hc11: New directory.
576 * configure: Regenerate.
578 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
580 * tic80: New directory.
581 * configure.in: Add configury.
582 * configure: Regenerate.
584 2000-04-20 Nick Clifton <nickc@cygnus.com>
586 * configure.in (extra_subdirs): Add testsuite to strongarm
588 * configure: Regenerate.
590 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
592 * MAINTAINERS: New file. Blank.
594 1999-11-18 Ben Elliston <bje@cygnus.com>
596 * configure.in: Require autoconf 2.13 and remove obsolete
597 invocation of AC_C_CROSS.
598 * configure: Regenerate.
600 1999-09-29 Doug Evans <devans@casey.cygnus.com>
602 * configure.in: Configure the testsuite directory for thumb.
603 * configure: Regenerate.
605 1999-07-16 Ben Elliston <bje@cygnus.com>
607 * configure.in: Configure the testsuite directory for arm.
608 * configure: Regenerate.
610 1999-04-08 Nick Clifton <nickc@cygnus.com>
612 * configure.in: Add support for MCore target.
613 * configure: Regenerate.
615 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
617 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
618 RUNTEST instead of commenting out, fixes portability problem.
620 1999-02-08 Nick Clifton <nickc@cygnus.com>
622 * configure.in: Add support for StrongARM target.
623 * configure: Regenerate.
625 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
627 * configure.in: Require autoconf 2.12.1 or higher.
629 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
631 * configure.in (i960-*-*): Add.
632 * configure: Rebuild.
634 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
636 * configure.in: Added case for fr30-*-*.
637 * configure: Regenerated.
639 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
641 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
642 to allow successful operation on Windows.
644 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
646 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
647 check can be invoked recursively.
649 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
651 * configure.in: Build simulator on sparclite and sparc86x targets.
652 * configure: Regenerate.
654 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
656 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
657 to autoconf and autoheader.
659 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
661 * Makefile.in (autoconf-common autoheader-common): Pass `-l
662 ../common' to autoconf and autoheader. Unconditionally run
663 autoconf in every subdir.
664 (autoconf-changelog autoheader-changelog): Unconditionally run
665 commands in every subdir.
666 (autoconf-install autoheader-install): Likewise.
668 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
670 * Makefile.in: Get SHELL from configure.
671 * (FLAGS_TO_PASS): Pass down SHELL.
672 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
675 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
677 * configure.in (extra_subdirs): Enable igen for mn10300.
678 * configure: Re-generate.
680 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
682 * configure.in (extra_subdirs): Add support for thumb target.
684 * configure (extra_subdirs): Add support for thumb target.
686 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
688 * configure.in (extra_subdirs): Add IGEN directory when MIPS
690 * configure: Regenerate.
692 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
694 * configure.in (extra_subdirs): v850ea needs igen.
695 * configure: Re-generate.
697 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
699 * configure.in (testdir): When a testsuite directory, add that to
700 the list of confdirs.
702 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
704 * configure.in (extra_subdirs): Enable igen ready for V850.
706 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
708 * configure.in (w65-*-*, only_if_enabled): Set.
709 * configure: Re-generate.
711 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
713 * configure.in (sparc*-*-*, only_if_enabled): Set
714 only_if_enabled=yes. Check only_if_enabled before enabling a
716 * configure: Regenerate.
718 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
720 * configure.in (extra_subdirs): Add v850e target.
722 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
724 * configure.in (extra_subdirs): Add v850ea target.
726 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
728 * configure.in (sparc*-*-*): Don't build erc32.
729 * configure: Regenerate.
731 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
733 * configure.in (m32r-*-*): New target.
734 * configure: Regenerate.
736 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
738 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
740 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
741 thought that .NOEXPORT was the default target.
743 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
745 * Makefile.in (clean mostlyclean): Restore targets accidentally
746 deleted in earlier change.
748 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
750 * Makefile.in (autoheader-common, autoheader-changelog,
751 autoheader-install): Perform autoheader in addition to autoconf.
753 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
755 * Makefile.in (autoconf-install): New target.
756 (autoconf-changelog): Try different way to obtain user name.
758 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
760 * Makefile.in (autoconf-changelog): New target, update
761 ChangeLog for all subdirectories - normally used after
762 autoconf-common target.
764 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
766 * configure.in (extra_subdirs): Include testsuite for d30v.
767 * configure: Regenerate.
769 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
771 (check): New rules - drive the testsuite.
773 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
775 * configure.in: Add mn10200 configure lines accidentally
777 * configure: Regenerated.
779 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
781 * configure.in (extra_subdirs): Generalize common sub directory
783 (extra_subdirs): For d30v add igen to the list to be built.
785 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
787 * configure.in (d30v): New target.
788 * configure: Regenerated.
790 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
792 * configure.in: Don't require GCC to build the mn10200
794 * configure: Rebuilt.
796 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
798 * configure.in: Don't configure any subdirs if no simulator
799 is being built. Don't use erc32 for sparc64.
800 * configure: Regenerated.
802 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
804 * Makefile.in (autoconf-common): New target.
805 * configure.in: Do configure common.
806 * configure: Regenerated.
808 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
810 * configure configure.in: Don't configure common anymore. Files
811 from common are now built in the individual simualtor directories.
812 This fixes problems with the WinGDB build procedure.
814 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
816 * configure: Enable the mn10200 simulator.
818 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
820 * configure.in (configdirs): Add common.
821 * configure: Regenerated.
823 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
825 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
826 system V based targets.
827 * configure: Regenerate.
829 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
831 * configure.in (--enable-sim-powerpc): Delete.
833 * configure: Regenerated.
835 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
837 * configure.in: Only build the V850 simulator if
839 * configure: Rebuild.
841 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
843 * configure.in: Do build erc32 for DOS and Windows hosts.
844 * configure: Rebuild.
846 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
848 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
849 be inherited from the parent. Remove INSTALL_XFORM and
850 INSTALL_XFORM1. Make INSTALL be set from configure.
852 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
854 * configure.in: Only build the MIPS simulator if we are using
856 * configure: Rebuild.
858 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
860 * configure.in (v850-*-*): Added V850 simulator.
862 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
864 * configure.in (d10v-*-*): Added D10V simulator.
866 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
868 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
869 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
871 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
872 (AC_PROG_INSTALL): Added.
873 * configure: Rebuilt.
875 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
877 * configure.in: Only configure erc32 if using gcc.
878 * configure: Rebuild.
880 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
882 * configure.in (sim_target): Build PowerPC simulator for powerpc
883 System V.4, Solaris, and Elf targets.
884 * configure: Regenerate with autoconf 2.10.
886 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
888 * configure.in: Only built erc32 simulator on Unix hosts as it
890 * configure: Regenerated with autoconf 2.8.
892 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
894 * erc32: Sparc simulator from the ESA.
896 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
898 From: Miles Bader <miles@gnu.ai.mit.edu>
899 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
900 * configure: Regenerate using autoconf.
902 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
904 * Makefile.in (install): Fix typo.
906 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
908 * configure: Regenerate with autoconf 2.7.
910 * Makefile.in (all): Simplify.
911 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
912 as in the all target.
913 (distclean, maintainer-clean, realclean): Likewise.
916 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
918 * Makefile.in (all): Remove extra '\' char from shell script.
920 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
922 * Makefile.in (all): Avoid a for loop with zero elements, even if
923 the loop will not be executed because of an if statement.
925 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
927 * Makefile.in (install): Add missing semicolon in "fi \".
929 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
931 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
932 defaults from configure.
934 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
936 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
937 if either --enable-sim-powerpc is used, or the host compiler is
940 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
942 * configure.in (mips*-*-*): Added "mips" simulator target.
943 * configure: Re-generated.
945 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
947 * Makefile.in (BISON): Remove macro.
948 (FLAGS_TO_PASS): Remove BISON.
950 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
952 * configure.in: Explicitly `exit 0' for broken shells.
953 * configure: Rebuilt.
955 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
957 * common/run.c (main): Initialize the callbacks.
959 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
961 * Makefile.in (maintainer-clean): New synonym for realclean.
963 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
965 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
966 the target is powerpc*-*-eabisim*, since it requires GCC to build.
968 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
970 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
971 <cagney@highland.com.au>.
972 * configure: Regnerate from configure.in.
974 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
976 * Update all FSF addresses except those in COPYING* files.
978 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
980 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
981 submakes either default or passed in value.
983 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
985 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
986 install): Changed targets so that they descend all
987 subdirectories in $(SUBDIRS).
988 (*-all, *-clean, *-install): Removed targets.
990 * configure.in: Don't bother with target makefile fragments, they
991 are no longer needed.
992 * configure: regenerated.
994 * Makefile.in, configure.in: converted to autoconf.
995 * configure: New file, generated with autconf 2.4.
997 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
999 * Makefile.in: Support ARM.
1000 * configure.in: Ditto.
1002 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1004 * Makefile.in: Support W65.
1005 * configure.in: Ditto.
1007 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1009 * Makefile.in: Add TAGS target.
1011 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1013 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1014 install-h8300, clean-h8300, all-h8500, install-h8500,
1015 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1018 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1020 * Makefile.in: remove endian.h trace from h8500
1022 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1024 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1026 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1028 * Makefile.in: make all of the all-* target (except all-nothing)
1029 depend on endian.h, so that if we're not building a simulator, we
1032 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1034 * Makefile.in (check, installcheck): Added dummy targets.
1036 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1038 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1039 explicitly make it, since some makes apparently don't work with
1040 VPATH and .c to executable rules (SunOS make for example).
1042 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1044 * Makefile.in (endian): Add explicit rule for broken makes.
1046 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1048 * Makefile.in (info, install-info): New targets.
1049 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1052 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1054 * Makefile.in (endian.h): build endian.h via a temporary file so
1055 that we don't leave an incomplete file lying around on
1057 (clean): remove endian, e.h, and endian.h.
1059 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1061 * Makefile.in, configure.in: if target isn't supported, build a