1 2009-11-24 DJ Delorie <dj@redhat.com>
4 * configure.ac: Add entry for Renesas RX.
5 * configure: Regenerate.
7 2009-11-22 Doug Evans <dje@sebabeach.org>
9 * cris/cpuall.h: Regenerate.
10 * cris/cpuv10.h: Regenerate.
11 * cris/cpuv32.h: Regenerate.
12 * cris/decodev10.c: Regenerate.
13 * cris/decodev10.h: Regenerate.
14 * cris/decodev32.c: Regenerate.
15 * cris/decodev32.h: Regenerate.
17 2009-11-12 Tristan Gingold <gingold@adacore.com>
19 * avr/interp.c (sim_write): Allow byte access.
22 2009-11-12 Tristan Gingold <gingold@adacore.com>
24 * avr/interp.c (sim_load): Clear memory before loading.
26 2009-11-09 Tristan Gingold <gingold@adacore.com>
28 * avr/interp.c (sim_resume): Fix typo for OP_ret.
30 2009-10-23 Doug Evans <dje@sebabeach.org>
32 * cris/arch.c: Regenerate.
33 * cris/arch.h: Regenerate.
34 * cris/cpuall.h: Regenerate.
35 * cris/cpuv10.c: Regenerate.
36 * cris/cpuv10.h: Regenerate.
37 * cris/cpuv32.c: Regenerate.
38 * cris/cpuv32.h: Regenerate.
39 * cris/cris-desc.c: Regenerate.
40 * cris/cris-desc.h: Regenerate.
41 * cris/cris-opc.h: Regenerate.
42 * cris/decodev10.c: Regenerate.
43 * cris/decodev10.h: Regenerate.
44 * cris/decodev32.c: Regenerate.
45 * cris/decodev32.h: Regenerate.
46 * cris/modelv10.c: Regenerate.
47 * cris/modelv32.c: Regenerate.
48 * cris/semcrisv10f-switch.c: Regenerate.
49 * cris/semcrisv32f-switch.c: Regenerate.
51 2009-10-22 Tristan Gingold <gingold@adacore.com>
53 * avr/interp.c (sim_stop): Return 1.
55 2009-10-16 Doug Evans <dje@sebabeach.org>
57 * MAINTAINERS: Add myself as m32r maintainer.
59 2009-10-15 Michael Egaer <eager@eagercon.com>
61 * MAINTAINERS: Add self as MicroBlaze maintainer.
63 2009-10-14 Ben Elliston <bje@gnu.org>
65 * MAINTAINERS (common): Move myself to "past maintainers" section.
67 2009-10-06 Michael Eager <eager@eagercon.com>
69 * microblaze/interp.c: Add include microblaze-dis.h.
71 2009-09-23 Michael Eager <eager@eagercon.com>
73 * configure: Add microblaze-*.* (not regenerated).
74 * configure.ac: Likewise.
75 * microblaze/config.in: New.
76 * microblaze/configure: Generate.
77 * microblaze/configure.ac: New.
78 * microblaze/interp.c: New.
79 * microblaze/Makefile.in: New.
80 * microblaze/microblaze.h: New.
81 * microblaze/microblaze.isa: New.
82 * microblaze/sim-main.h: New.
83 * microblaze/sysdep.h: New.
85 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
87 * avr/config.in: Regenerate.
88 * avr/configure: Likewise.
89 * configure: Likewise.
90 * cris/config.in: Likewise.
91 * cris/configure: Likewise.
93 * configure.ac: m4_include toplevel config/override.m4.
94 * configure: Regenerate.
95 * avr/configure: Regenerate.
96 * cris/configure: Regenerate.
98 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
100 * Makefile.in (datarootdir): New variable.
102 2009-05-18 Jon Beniston <jon@beniston.com>
104 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
105 * configure.ac: Add lm32 target.
106 * lm32: New directory.
108 2009-05-11 Andrew Cagney <cagney@gnu.org>
110 * MAINTAINERS: Orphan ppc.
112 2009-05-08 Kevin Buettner <kevinb@redhat.com>
114 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
115 m32c_signal_to_target. Change signal return values from SIGILL,
116 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
117 TARGET_SIGNAL_SEGV, etc. Fix all callers.
119 2009-04-30 Anthony Green <green@moxielogic.com>
121 * MAINTAINERS: Add myself for the moxie port.
122 * moxie: New directory.
123 * configure.ac: Add entry for moxie.
124 * configure: Regenerate.
126 2009-04-27 Tristan Gingold <gingold@adacore.com>
128 * avr: New directory.
129 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
130 * avr/config.in: New file, generated by autoheader.
131 * avr/configure: New file generated by autoconf.
132 * configure.ac: Add avr.
133 * configure: Regenerated.
135 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
137 * Makefile.in: Add dummy install-pdf, html, and
138 install-html targets.
140 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
142 * cris/sim-if.c: Include errno.h.
143 (cris_start_address, cris_program_offset): New variables.
144 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
146 (cris_options): New options --cris-program-offset and
147 --cris-start-address.
148 (cris_option_handler): Handle new options.
149 (cris_program_offset_write, cris_set_section_offset_iterator)
150 (cris_offset_sections, cris_offset_sections): New functions.
151 (sim_load): Use cris_program_offset_write as function argument to
152 cris_load_elf_file, not sim_write.
153 (struct offsetinfo): New struct.
154 (cris_handle_interpreter): Fix typo in comment.
155 (sim_open): Call cris_offset_sections as soon as the bfd of the
156 infile is available. Gate bfd validity checks on abfd non-NULL.
157 (sim_create_inferior): Let cris_start_address when != -1 override
158 other start-address choices.
160 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
162 * cris/traps.c (abort): Define to call sim_io_error.
163 (create_map): Make -1 imply a non-fixed address, not 0. All
164 callers changed. Only prefer the next higher unmapped address if
165 the last mapped address is no less than 0x40000000. Check that
166 the address to be mapped is not already mapped. Update head
168 (unmap_pages): Don't call abort when recursive call fails, just
169 note and return an error if a page in the range couldn't be unmapped.
170 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
171 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
172 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
173 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
174 don't abort on page not being mapped. Handle non-anon filemap
175 with length padded to pagesize.
177 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
179 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
180 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
181 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
182 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
183 (TARGET_AT_CLKTCK): Remove redundant macros.
184 (AUX_ENT): Adjust to use standard ELF AT_* macros.
185 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
187 (sim_open): Also pass AT_SECURE.
189 * cris/sim-main.h (struct _sim_cpu): New member
190 set_target_thread_data.
191 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
192 * cris/crisv10f.c: Ditto.
193 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
194 (MY (f_specific_init)): Set new _sim_cpu member to new function.
195 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
196 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
199 * cris/traps.c (TARGET_SYS_exit_group): Define.
200 (cris_break_13_handler): Handle it like the exit for the last
203 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
204 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
205 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
206 2.6.27. Set machine field to the BFD printable name of the
209 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
210 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
211 TARGET_MAP_DENYWRITE.
213 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
214 (TARGET_X_OK, TARGET_F_OK): Define.
215 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
217 * cris/semcrisv32f-switch.c: Regenerate.
219 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
221 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
222 just a short CRIS-specific notice. Tweak the wording for a
223 failing architecture test.
225 * cris/traps.c (TARGET_SYS_writev): New macro.
226 (is_mapped_only, cris_dump_map): New functions.
227 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
228 and prot combinations and a non-zero page-offset. If
229 TARGET_MAP_FIXED, unmap pages before mapping them.
230 <case TARGET_SYS_mprotect>: When checking, allow any length
231 argument. Don't actually do anything.
232 <case TARGET_SYS_writev>: New case.
234 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
235 * cris/sim-if.c: Include elf-bfd.h.
236 (struct progbounds): New members end_loadmem, start_nonloadmem.
237 (xprintf, eprintf): New functions, copied from common/sim-load.c.
238 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
239 (get_progbounds_iterator): Renamed from get_progbounds. Make
240 static. Update head comment. Set new struct progbounds members.
241 (exec_load_addr, interp_load_addr, interp_start_addr): New static
243 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
244 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
246 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
247 handling to use auxv_entries. Improve error message and checking
248 for invalid programs. Use new variable abfd for the program
249 instead of for each access reaching into sd to get it.
250 (sim_create_inferior): If non-zero, use interp_start_addr instead
251 of the program start address.
252 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
253 stale comment. Always specify little-endian.
255 2008-07-29 Nick Clifton <nickc@redhat.com>
257 * common/genmloop.sh: Add new parameter: -shell to specify the
258 command interpreter to use to run the input file. This is
259 necessary because otherwise SHELL is taken from the user's
260 environment, and not from the makefile that invoked this script
261 and the user might not be running an sh-like shell.
262 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
263 * fr30/Makefile.in: Likewise.
264 * frv/Makefile.in: Likewise.
265 * i960/Makefile.in: Likewise.
266 * iq2000/Makefile.in: Likewise.
267 * m32r/Makefile.in: Likewise.
269 * frv/mloop.in: Add missing start of line comment marker.
271 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
273 * cris/configure: Regenerate to track ../common/common.m4 changes.
274 * cris/config.in: Ditto.
276 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
277 Daniel Jacobowitz <dan@codesourcery.com>
278 Joseph Myers <joseph@codesourcery.com>
280 * cris/configure: Regenerate.
282 2008-05-09 Olivier Hainque <hainque@adacore.com>
284 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
286 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
288 * MAINTAINERS: Add myself as maintainer of cr16 port.
290 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
292 Add simulator for National cr16 processor.
293 * cr16: New directory.
294 * configure.ac: Add entry for National cr16.
295 * configure: Regenerate.
297 2008-02-05 DJ Delorie <dj@redhat.com>
299 * configure.ac (v850): V850 now has a testsuite.
300 * configure (v850): Likewise.
302 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
304 Updated copyright notices for most files.
306 2007-12-19 DJ Delorie <dj@redhat.com>
308 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
311 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
313 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
314 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
315 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
316 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
317 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
318 cris/semcrisv32f-switch.c: Regenerate.
320 2007-08-24 Joel Brobecker <brobecker@adacore.com>
322 Switch the license of all files explicitly copyright the FSF
325 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
327 * Makefile.in: Add dummy "pdf" target.
329 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
331 * cris/traps.c (dump_statistics): Change format for cycle numbers
332 to %llu and cast parameters to unsigned long long.
334 2007-02-16 Thiemo Seufer <ths@mips.com>
336 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
338 2007-01-28 Manuel Lauss <slauss@resi.at>
340 * configure.ac (sh64-*-*): Change to sh64*-*-*.
341 (sh-*-*): Change to sh*-*-*.
342 * configure: Regenerated.
344 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
346 Updated copyright notices for most files.
348 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
350 * Makefile.in (autoconf-common autoheader-common): Only run
351 autoheader on subdirs with a file config.in.
353 * configure.ac (common): Make the default "yes" for all targets
355 * configure: Regenerate.
357 * Makefile.in (autoconf-common autoheader-common): In documented
358 usage, say SHELL=/bin/sh.
359 (.PHONY): Add autoheader-common.
361 * MAINTAINERS: Add self as authorized committer for *.
363 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
364 Hans-Peter Nilsson <hp@axis.com>
366 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
367 (cris_unknown_syscall_action): Declare.
368 * cris/sim-if.c (cris_unknown_syscall_action): Define.
369 (cris_options): Add cris-unknown-syscall option.
370 (cris_option_handler): Correct comment about and error message for
371 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
372 * cris/traps.c: Include stdarg.h
373 (cris_unknown_syscall): New function.
374 (cris_break_13_handler): Instead of sim_io_eprintf and
375 sim_engine_halt, call cris_unknown_syscall to handle more or less
376 unknown syscalls. Adjust code as necessary to handle return
379 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
381 * MAINTAINERS: Add Dave Brolley for sh64.
383 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
385 * cris/traps.c (TARGET_PIPE_BUF): New macro.
386 (cris_pipe_empty): Correct initialization of "remaining". Only
387 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
390 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
392 * cris/configure.ac: Check for limits.h and sys/param.h.
393 * cris/configure, cris/config.in: Rebuild.
394 * cris/traps.c (SIM_PATHMAX): New macro.
395 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
397 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
399 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
400 * Makefile.in (FLAGS_TO_PASS): Include libdir.
401 * configure: Regenerated.
403 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
405 * cris/configure: Regenerated.
407 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
409 * cris/configure: Regenerated.
411 2006-05-05 Andreas Schwab <schwab@suse.de>
413 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
414 * configure: Regenerate.
416 * Makefile.in (CFLAGS_FOR_BUILD): Define.
417 (CC_FOR_BUILD): Don't override.
418 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
420 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
422 * MAINTAINERS: Add an "Authorized committers" section, and list
425 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
427 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
429 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
431 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
432 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
433 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
434 (all): Depend on rvdummy$(EXEEXT).
435 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
436 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
438 * cris/configure: Regenerate.
439 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
440 (enum cris_interrupt_type, crisv10deliver_interrupt)
441 (crisv32deliver_interrupt: New declarations.
442 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
443 sim_events_tickn and set state-events member work_pending when it's
444 time for the next event.
445 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
446 interrupt-delivery function.
447 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
448 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
449 * cris/devices.c: Include hw-device.h.
450 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
451 (device_io_write_buffer): Only perform 0x900000xx-functions if
452 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
453 call hw_io_write_buffer. Add return 0 last in function.
454 * cris/sim-if.c (cris_have_900000xxif): Now global.
455 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
456 Force "-model" option, effectively.
457 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
458 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
460 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
462 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
463 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
464 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
466 2006-03-13 DJ Delorie <dj@redhat.com>
468 * MAINTAINERS: Add self as m32c sim maintainer.
470 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
472 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
474 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
476 2006-01-23 Jim Blandy <jimb@redhat.com>
478 Add simulator for Renesas M32C and M16C.
480 * m32c: New directory.
481 * configure.ac: Add entry for Renesas M32C.
482 * configure: Regenerate.
484 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
486 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
487 cycle count for the current insn.
489 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
491 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
492 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
493 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
494 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
496 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
498 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
499 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
500 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
501 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
502 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
503 cris/semcrisv32f-switch.c: Regenerate.
505 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
507 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
508 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
510 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
511 F_GETFL on fd 0, 1 and 2.
513 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
515 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
516 last_open_fd, last_open_flags.
517 * cris/traps.c: Don't include targ-vals.h.
518 (TARGET_O_ACCMODE): Define.
519 (cris_break_13_handler): Set new _sim_cpu members.
520 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
521 Rearrange code as switch. Emit "unimplemented" abort for
522 unimplemented fcntl calls.
524 * cris/traps.c (TARGET_SYS_stat): Define.
525 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
526 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
528 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
530 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
531 low 32 bits are used after an unsigned long cast.
533 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
535 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
537 2005-05-26 Chris Demetriou <cgd@netbsd.org>
539 * MAINTAINERS: Update my mail address, move myself to the
540 "Past maintainers" section.
542 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
544 * configure.ac: Add igen to v850 build.
545 * configure: Regenerate.
547 2005-04-29 Paul Brook <paul@codesourcery.com>
549 * common/callback.c (PIPE_BUF): Provide default definition.
550 (os_lstat): Use stat if lstat is not available on the host.
551 (os_ftruncate): Return EINVAL if not available on the host.
552 (os_truncate): Ditto.
553 * common/configure.ac: Check for lstat, truncate and ftruncate.
554 * common/configure: Regenerate.
555 * common/config.in: Regenerate.
557 2005-04-27 Paul Brook <paul@codesourcery.com>
559 * common/Make-common.in: Add $(EXEEXT) to "run".
561 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
563 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
564 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
565 implemented. In call to create_map, pad length argument to 8k.
567 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
569 * configure.ac: Add explicit sh64 case.
570 * configure: Regenerate.
572 2005-03-30 Paul Brook <paul@codesourcery.com>
574 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
576 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
578 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
579 include cgen-ops.h in decodev10.c and decodev32.c.
580 * cris/sim-main.h: Don't include cgen-ops.h here.
581 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
582 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
583 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
584 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
585 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
586 cris/semcrisv32f-switch.c: Regenerate.
588 * cris/traps.c (cris_break_13_handler) <case
589 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
590 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
592 2005-03-23 Mark Kettenis <kettenis@gnu.org>
594 * cris/configure: Regenerate.
596 2005-02-28 Jim Blandy <jimb@redhat.com>
598 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
599 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
600 Regenerated, after change to common/aclocal.m4.
602 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
604 * iq2000: New target subdirectory.
605 * configure.ac: Add iq2000 target.
606 * configure: Regenerate.
608 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
610 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
611 (realclean, install): Fail if subdir make failed.
613 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
615 * cris: New directory, simulator for Axis Communications CRIS
616 including CRIS v32, CGEN-based.
617 * configure.ac: Add corresponding configury.
618 * configure: Regenerate.
620 2005-01-17 Andrew Cagney <cagney@gnu.org>
622 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
623 common directory. Remove sparc*-*-* from list.
625 2005-01-11 Andrew Cagney <cagney@gnu.org>
627 * Makefile.in (autoconf-common autoheader-common): Add --force to
628 autoconf and autoheader.
629 (autoconf-common autoheader-common)
630 (autoconf-install autoheader-install): Check for configure.ac, not
632 * configure.ac: Delete AC_CONFIG_AUX_DIR.
633 * configure: Re-generate.
635 2005-01-07 Andrew Cagney <cagney@gnu.org>
637 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
638 correctly calls AC_CONFIG_SUBDIRS.
639 * configure: Re-generate.
641 2004-12-01 Andrew Cagney <cagney@gnu.org>
643 * i960, h8500: Delete directory.
645 2004-11-12 Andrew Cagney <cagney@gnu.org>
647 * d30v, fr30, mn10200, z8k: Delete directory.
649 2004-03-10 Ben Elliston <bje@gnu.org>
651 * MAINTAINERS: Update my mail address.
653 2004-01-26 Chris Demetriou <cgd@broadcom.com>
655 * configure.in (mips*-*-*): Configure in testsuite.
656 * configure: Regenerate.
658 2003-10-08 Dave Brolley <brolley@redhat.com>
660 * configure.in: Move frv handling to alphabetically correct placement.
662 2003-09-03 Andreas Schwab <schwab@suse.de>
664 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
666 2003-08-29 Dave Brolley <brolley@redhat.com>
668 * MAINTAINERS: Add myself as maintainer of the FRV port.
670 2003-08-20 Michael Snyder <msnyder@redhat.com>
671 Dave Brolley <brolley@redhat.com>
673 * frv/: New directory, simulator for the Fujitsu FRV.
674 * configure.in: Add frv configury.
675 * configure: Regenerate.
677 2003-08-10 Ben Elliston <bje@wasabisystems.com>
679 * MAINTAINERS: Update my mail address.
681 2003-08-09 Andrew Cagney <cagney@redhat.com>
683 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
684 maintenance. List igen and sh maintainers. Mention that target
685 and global maintainers pick up the slack.
687 2003-07-09 Michael Snyder <msnyder@redhat.com>
689 * configure.in: Add testsuite to extra_subdirs for sh.
690 * configure: Regenerate.
692 2003-01-23 Nick Clifton <nickc@redhat.com>
696 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
698 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
700 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
702 * MAINTAINERS: Update my email address.
704 2002-07-17 Andrew Cagney <ac131313@redhat.com>
706 * w65/: Delete directory.
708 2002-07-16 Andrew Cagney <ac131313@redhat.com>
710 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
711 * configure: Re-generate.
713 2002-07-13 Andrew Cagney <ac131313@redhat.com>
715 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
716 * configure: Re-generate.
718 2002-06-16 Andrew Cagney <ac131313@redhat.com>
720 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
721 id, date and host to be overriden by NAME, ID, DATE and HOST
722 respectfully. Use ISO dates.
724 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
726 * Makefile.in (ChangeLog): New makefile variable.
727 * README-HACKING: Mention the ChangeLog makefile variable.
729 2002-06-01 Andrew Cagney <ac131313@redhat.com>
731 * tic80/: Delete directory.
733 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
735 * MAINTAINERS: Update my email address.
737 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
739 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
741 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
743 * MAINTAINERS: Record self as a co-maintainer of just common/.
745 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
747 * MAINTAINERS: Point to GDB files describing overall maintaince
748 and check-in procedures.
750 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
752 * MAINTAINERS: Add myself for ARM portions.
754 2001-10-19 Andrew Cagney <ac131313@redhat.com>
756 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
757 * configure: Re-generate.
759 2001-02-16 Ben Elliston <bje@redhat.com>
761 * MAINTAINERS: Add myself for common portions.
763 2001-01-15 Chris Demetriou <cgd@broadcom.com>
765 * MAINTAINERS: Added self and Andrew for the mips sim.
767 2000-10-25 Geoff Keating <geoffk@cygnus.com>
769 * MAINTAINERS: Added self and Andrew for the ppc sim.
771 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
773 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
774 * m68hc11: New directory.
776 * configure: Regenerate.
778 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
780 * tic80: New directory.
781 * configure.in: Add configury.
782 * configure: Regenerate.
784 2000-04-20 Nick Clifton <nickc@cygnus.com>
786 * configure.in (extra_subdirs): Add testsuite to strongarm
788 * configure: Regenerate.
790 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
792 * MAINTAINERS: New file. Blank.
794 1999-11-18 Ben Elliston <bje@cygnus.com>
796 * configure.in: Require autoconf 2.13 and remove obsolete
797 invocation of AC_C_CROSS.
798 * configure: Regenerate.
800 1999-09-29 Doug Evans <devans@casey.cygnus.com>
802 * configure.in: Configure the testsuite directory for thumb.
803 * configure: Regenerate.
805 1999-07-16 Ben Elliston <bje@cygnus.com>
807 * configure.in: Configure the testsuite directory for arm.
808 * configure: Regenerate.
810 1999-04-08 Nick Clifton <nickc@cygnus.com>
812 * configure.in: Add support for MCore target.
813 * configure: Regenerate.
815 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
817 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
818 RUNTEST instead of commenting out, fixes portability problem.
820 1999-02-08 Nick Clifton <nickc@cygnus.com>
822 * configure.in: Add support for StrongARM target.
823 * configure: Regenerate.
825 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
827 * configure.in: Require autoconf 2.12.1 or higher.
829 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
831 * configure.in (i960-*-*): Add.
832 * configure: Rebuild.
834 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
836 * configure.in: Added case for fr30-*-*.
837 * configure: Regenerated.
839 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
841 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
842 to allow successful operation on Windows.
844 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
846 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
847 check can be invoked recursively.
849 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
851 * configure.in: Build simulator on sparclite and sparc86x targets.
852 * configure: Regenerate.
854 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
856 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
857 to autoconf and autoheader.
859 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
861 * Makefile.in (autoconf-common autoheader-common): Pass `-l
862 ../common' to autoconf and autoheader. Unconditionally run
863 autoconf in every subdir.
864 (autoconf-changelog autoheader-changelog): Unconditionally run
865 commands in every subdir.
866 (autoconf-install autoheader-install): Likewise.
868 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
870 * Makefile.in: Get SHELL from configure.
871 * (FLAGS_TO_PASS): Pass down SHELL.
872 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
875 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
877 * configure.in (extra_subdirs): Enable igen for mn10300.
878 * configure: Re-generate.
880 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
882 * configure.in (extra_subdirs): Add support for thumb target.
884 * configure (extra_subdirs): Add support for thumb target.
886 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
888 * configure.in (extra_subdirs): Add IGEN directory when MIPS
890 * configure: Regenerate.
892 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
894 * configure.in (extra_subdirs): v850ea needs igen.
895 * configure: Re-generate.
897 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
899 * configure.in (testdir): When a testsuite directory, add that to
900 the list of confdirs.
902 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
904 * configure.in (extra_subdirs): Enable igen ready for V850.
906 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
908 * configure.in (w65-*-*, only_if_enabled): Set.
909 * configure: Re-generate.
911 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
913 * configure.in (sparc*-*-*, only_if_enabled): Set
914 only_if_enabled=yes. Check only_if_enabled before enabling a
916 * configure: Regenerate.
918 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
920 * configure.in (extra_subdirs): Add v850e target.
922 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
924 * configure.in (extra_subdirs): Add v850ea target.
926 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
928 * configure.in (sparc*-*-*): Don't build erc32.
929 * configure: Regenerate.
931 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
933 * configure.in (m32r-*-*): New target.
934 * configure: Regenerate.
936 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
938 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
940 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
941 thought that .NOEXPORT was the default target.
943 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
945 * Makefile.in (clean mostlyclean): Restore targets accidentally
946 deleted in earlier change.
948 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
950 * Makefile.in (autoheader-common, autoheader-changelog,
951 autoheader-install): Perform autoheader in addition to autoconf.
953 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
955 * Makefile.in (autoconf-install): New target.
956 (autoconf-changelog): Try different way to obtain user name.
958 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
960 * Makefile.in (autoconf-changelog): New target, update
961 ChangeLog for all subdirectories - normally used after
962 autoconf-common target.
964 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
966 * configure.in (extra_subdirs): Include testsuite for d30v.
967 * configure: Regenerate.
969 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
971 (check): New rules - drive the testsuite.
973 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
975 * configure.in: Add mn10200 configure lines accidentally
977 * configure: Regenerated.
979 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
981 * configure.in (extra_subdirs): Generalize common sub directory
983 (extra_subdirs): For d30v add igen to the list to be built.
985 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
987 * configure.in (d30v): New target.
988 * configure: Regenerated.
990 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
992 * configure.in: Don't require GCC to build the mn10200
994 * configure: Rebuilt.
996 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
998 * configure.in: Don't configure any subdirs if no simulator
999 is being built. Don't use erc32 for sparc64.
1000 * configure: Regenerated.
1002 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
1004 * Makefile.in (autoconf-common): New target.
1005 * configure.in: Do configure common.
1006 * configure: Regenerated.
1008 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
1010 * configure configure.in: Don't configure common anymore. Files
1011 from common are now built in the individual simualtor directories.
1012 This fixes problems with the WinGDB build procedure.
1014 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
1016 * configure: Enable the mn10200 simulator.
1018 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
1020 * configure.in (configdirs): Add common.
1021 * configure: Regenerated.
1023 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1025 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1026 system V based targets.
1027 * configure: Regenerate.
1029 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1031 * configure.in (--enable-sim-powerpc): Delete.
1032 (--enable-sim): Add.
1033 * configure: Regenerated.
1035 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1037 * configure.in: Only build the V850 simulator if
1039 * configure: Rebuild.
1041 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1043 * configure.in: Do build erc32 for DOS and Windows hosts.
1044 * configure: Rebuild.
1046 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1048 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1049 be inherited from the parent. Remove INSTALL_XFORM and
1050 INSTALL_XFORM1. Make INSTALL be set from configure.
1052 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1054 * configure.in: Only build the MIPS simulator if we are using
1056 * configure: Rebuild.
1058 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1060 * configure.in (v850-*-*): Added V850 simulator.
1062 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1064 * configure.in (d10v-*-*): Added D10V simulator.
1066 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1068 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1069 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1071 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1072 (AC_PROG_INSTALL): Added.
1073 * configure: Rebuilt.
1075 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1077 * configure.in: Only configure erc32 if using gcc.
1078 * configure: Rebuild.
1080 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1082 * configure.in (sim_target): Build PowerPC simulator for powerpc
1083 System V.4, Solaris, and Elf targets.
1084 * configure: Regenerate with autoconf 2.10.
1086 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1088 * configure.in: Only built erc32 simulator on Unix hosts as it
1090 * configure: Regenerated with autoconf 2.8.
1092 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1094 * erc32: Sparc simulator from the ESA.
1096 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1098 From: Miles Bader <miles@gnu.ai.mit.edu>
1099 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1100 * configure: Regenerate using autoconf.
1102 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1104 * Makefile.in (install): Fix typo.
1106 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1108 * configure: Regenerate with autoconf 2.7.
1110 * Makefile.in (all): Simplify.
1111 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1112 as in the all target.
1113 (distclean, maintainer-clean, realclean): Likewise.
1114 (install): Likewise.
1116 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1118 * Makefile.in (all): Remove extra '\' char from shell script.
1120 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1122 * Makefile.in (all): Avoid a for loop with zero elements, even if
1123 the loop will not be executed because of an if statement.
1125 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1127 * Makefile.in (install): Add missing semicolon in "fi \".
1129 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1131 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1132 defaults from configure.
1134 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1136 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1137 if either --enable-sim-powerpc is used, or the host compiler is
1140 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1142 * configure.in (mips*-*-*): Added "mips" simulator target.
1143 * configure: Re-generated.
1145 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1147 * Makefile.in (BISON): Remove macro.
1148 (FLAGS_TO_PASS): Remove BISON.
1150 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1152 * configure.in: Explicitly `exit 0' for broken shells.
1153 * configure: Rebuilt.
1155 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1157 * common/run.c (main): Initialize the callbacks.
1159 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1161 * Makefile.in (maintainer-clean): New synonym for realclean.
1163 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1165 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1166 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1168 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1170 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1171 <cagney@highland.com.au>.
1172 * configure: Regnerate from configure.in.
1174 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1176 * Update all FSF addresses except those in COPYING* files.
1178 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1180 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1181 submakes either default or passed in value.
1183 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1185 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1186 install): Changed targets so that they descend all
1187 subdirectories in $(SUBDIRS).
1188 (*-all, *-clean, *-install): Removed targets.
1190 * configure.in: Don't bother with target makefile fragments, they
1191 are no longer needed.
1192 * configure: regenerated.
1194 * Makefile.in, configure.in: converted to autoconf.
1195 * configure: New file, generated with autconf 2.4.
1197 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1199 * Makefile.in: Support ARM.
1200 * configure.in: Ditto.
1202 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1204 * Makefile.in: Support W65.
1205 * configure.in: Ditto.
1207 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1209 * Makefile.in: Add TAGS target.
1211 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1213 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1214 install-h8300, clean-h8300, all-h8500, install-h8500,
1215 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1218 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1220 * Makefile.in: remove endian.h trace from h8500
1222 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1224 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1226 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1228 * Makefile.in: make all of the all-* target (except all-nothing)
1229 depend on endian.h, so that if we're not building a simulator, we
1232 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1234 * Makefile.in (check, installcheck): Added dummy targets.
1236 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1238 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1239 explicitly make it, since some makes apparently don't work with
1240 VPATH and .c to executable rules (SunOS make for example).
1242 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1244 * Makefile.in (endian): Add explicit rule for broken makes.
1246 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1248 * Makefile.in (info, install-info): New targets.
1249 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1252 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1254 * Makefile.in (endian.h): build endian.h via a temporary file so
1255 that we don't leave an incomplete file lying around on
1257 (clean): remove endian, e.h, and endian.h.
1259 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1261 * Makefile.in, configure.in: if target isn't supported, build a