1 2009-11-12 Tristan Gingold <gingold@adacore.com>
3 * avr/interp.c (sim_load): Clear memory before loading.
5 2009-11-09 Tristan Gingold <gingold@adacore.com>
7 * avr/interp.c (sim_resume): Fix typo for OP_ret.
9 2009-10-23 Doug Evans <dje@sebabeach.org>
11 * cris/arch.c: Regenerate.
12 * cris/arch.h: Regenerate.
13 * cris/cpuall.h: Regenerate.
14 * cris/cpuv10.c: Regenerate.
15 * cris/cpuv10.h: Regenerate.
16 * cris/cpuv32.c: Regenerate.
17 * cris/cpuv32.h: Regenerate.
18 * cris/cris-desc.c: Regenerate.
19 * cris/cris-desc.h: Regenerate.
20 * cris/cris-opc.h: Regenerate.
21 * cris/decodev10.c: Regenerate.
22 * cris/decodev10.h: Regenerate.
23 * cris/decodev32.c: Regenerate.
24 * cris/decodev32.h: Regenerate.
25 * cris/modelv10.c: Regenerate.
26 * cris/modelv32.c: Regenerate.
27 * cris/semcrisv10f-switch.c: Regenerate.
28 * cris/semcrisv32f-switch.c: Regenerate.
30 2009-10-22 Tristan Gingold <gingold@adacore.com>
32 * avr/interp.c (sim_stop): Return 1.
34 2009-10-16 Doug Evans <dje@sebabeach.org>
36 * MAINTAINERS: Add myself as m32r maintainer.
38 2009-10-15 Michael Egaer <eager@eagercon.com>
40 * MAINTAINERS: Add self as MicroBlaze maintainer.
42 2009-10-14 Ben Elliston <bje@gnu.org>
44 * MAINTAINERS (common): Move myself to "past maintainers" section.
46 2009-10-06 Michael Eager <eager@eagercon.com>
48 * microblaze/interp.c: Add include microblaze-dis.h.
50 2009-09-23 Michael Eager <eager@eagercon.com>
52 * configure: Add microblaze-*.* (not regenerated).
53 * configure.ac: Likewise.
54 * microblaze/config.in: New.
55 * microblaze/configure: Generate.
56 * microblaze/configure.ac: New.
57 * microblaze/interp.c: New.
58 * microblaze/Makefile.in: New.
59 * microblaze/microblaze.h: New.
60 * microblaze/microblaze.isa: New.
61 * microblaze/sim-main.h: New.
62 * microblaze/sysdep.h: New.
64 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
66 * avr/config.in: Regenerate.
67 * avr/configure: Likewise.
68 * configure: Likewise.
69 * cris/config.in: Likewise.
70 * cris/configure: Likewise.
72 * configure.ac: m4_include toplevel config/override.m4.
73 * configure: Regenerate.
74 * avr/configure: Regenerate.
75 * cris/configure: Regenerate.
77 2009-07-30 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
79 * Makefile.in (datarootdir): New variable.
81 2009-05-18 Jon Beniston <jon@beniston.com>
83 * MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
84 * configure.ac: Add lm32 target.
85 * lm32: New directory.
87 2009-05-11 Andrew Cagney <cagney@gnu.org>
89 * MAINTAINERS: Orphan ppc.
91 2009-05-08 Kevin Buettner <kevinb@redhat.com>
93 * m32c/gdb-if.c (m32c_signal_to_host): Rename to
94 m32c_signal_to_target. Change signal return values from SIGILL,
95 SIGTRAP, SIGSEGV, etc. to TARGET_SIGNAL_ILL, TARGET_SIGNAL_TRAP,
96 TARGET_SIGNAL_SEGV, etc. Fix all callers.
98 2009-04-30 Anthony Green <green@moxielogic.com>
100 * MAINTAINERS: Add myself for the moxie port.
101 * moxie: New directory.
102 * configure.ac: Add entry for moxie.
103 * configure: Regenerate.
105 2009-04-27 Tristan Gingold <gingold@adacore.com>
107 * avr: New directory.
108 * avr/interp.c, avr/Makefile.in, avr/configure.ac: New files.
109 * avr/config.in: New file, generated by autoheader.
110 * avr/configure: New file generated by autoconf.
111 * configure.ac: Add avr.
112 * configure: Regenerated.
114 2009-04-17 Carlos O'Donell <carlos@codesourcery.com>
116 * Makefile.in: Add dummy install-pdf, html, and
117 install-html targets.
119 2009-01-18 Hans-Peter Nilsson <hp@axis.com>
121 * cris/sim-if.c: Include errno.h.
122 (cris_start_address, cris_program_offset): New variables.
123 (OPTION_CRIS_PROGRAM_OFFSET, OPTION_CRIS_STARTADDR): New option
125 (cris_options): New options --cris-program-offset and
126 --cris-start-address.
127 (cris_option_handler): Handle new options.
128 (cris_program_offset_write, cris_set_section_offset_iterator)
129 (cris_offset_sections, cris_offset_sections): New functions.
130 (sim_load): Use cris_program_offset_write as function argument to
131 cris_load_elf_file, not sim_write.
132 (struct offsetinfo): New struct.
133 (cris_handle_interpreter): Fix typo in comment.
134 (sim_open): Call cris_offset_sections as soon as the bfd of the
135 infile is available. Gate bfd validity checks on abfd non-NULL.
136 (sim_create_inferior): Let cris_start_address when != -1 override
137 other start-address choices.
139 2009-01-06 Hans-Peter Nilsson <hp@axis.com>
141 * cris/traps.c (abort): Define to call sim_io_error.
142 (create_map): Make -1 imply a non-fixed address, not 0. All
143 callers changed. Only prefer the next higher unmapped address if
144 the last mapped address is no less than 0x40000000. Check that
145 the address to be mapped is not already mapped. Update head
147 (unmap_pages): Don't call abort when recursive call fails, just
148 note and return an error if a page in the range couldn't be unmapped.
149 (cris_bmod_handler, h_supr_set_handler, h_supr_get_handler)
150 (schedule, make_first_thread, cris_pipe_empty): New local variable sd.
151 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
152 non-MAP_FIXED argument overlapping existing map. For MAP_FIXED,
153 don't abort on page not being mapped. Handle non-anon filemap
154 with length padded to pagesize.
156 2009-01-03 Hans-Peter Nilsson <hp@axis.com>
158 * cris/sim-if.c (TARGET_AT_NULL, TARGET_AT_PHDR, TARGET_AT_PHENT)
159 (TARGET_AT_PHNUM, TARGET_AT_PAGESZ, TARGET_AT_BASE)
160 (TARGET_AT_FLAGS, TARGET_AT_ENTRY, TARGET_AT_UID, TARGET_AT_EUID)
161 (TARGET_AT_GID, TARGET_AT_EGID, TARGET_AT_HWCAP)
162 (TARGET_AT_CLKTCK): Remove redundant macros.
163 (AUX_ENT): Adjust to use standard ELF AT_* macros.
164 (AUX_ENTF): Ditto. Remove always-0 middle argument. Update all
166 (sim_open): Also pass AT_SECURE.
168 * cris/sim-main.h (struct _sim_cpu): New member
169 set_target_thread_data.
170 * cris/crisv32f.c (CRIS_TLS_REGISTER): Define.
171 * cris/crisv10f.c: Ditto.
172 * cris/cris-tmpl.c (MY (set_target_thread_data)): New function.
173 (MY (f_specific_init)): Set new _sim_cpu member to new function.
174 * cris/traps.c (TARGET_SYS_set_thread_area): Define.
175 (cris_break_13_handler) <case TARGET_SYS_set_thread_area>: New
178 * cris/traps.c (TARGET_SYS_exit_group): Define.
179 (cris_break_13_handler): Handle it like the exit for the last
182 * cris/traps.c (TARGET_UTSNAME): Update to 2009-01-01.
183 (TARGET_EPOCH): Update to match TARGET_UTSNAME. Correct comment.
184 (cris_break_13_handler) <case TARGET_SYS_uname>: Update to
185 2.6.27. Set machine field to the BFD printable name of the
188 * cris/traps.c (TARGET_MAP_DENYWRITE): Define.
189 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle
190 TARGET_MAP_DENYWRITE.
192 * cris/traps.c (TARGET_SYS_access, TARGET_R_OK, TARGET_W_OK)
193 (TARGET_X_OK, TARGET_F_OK): Define.
194 (cris_break_13_handler) <case TARGET_SYS_access>: New case.
196 * cris/semcrisv32f-switch.c: Regenerate.
198 2008-12-30 Hans-Peter Nilsson <hp@axis.com>
200 * cris/sim-if.c (sim_open): If sim_analyze_program fails, emit
201 just a short CRIS-specific notice. Tweak the wording for a
202 failing architecture test.
204 * cris/traps.c (TARGET_SYS_writev): New macro.
205 (is_mapped_only, cris_dump_map): New functions.
206 (cris_break_13_handler) <case TARGET_SYS_mmap2>: Handle more flags
207 and prot combinations and a non-zero page-offset. If
208 TARGET_MAP_FIXED, unmap pages before mapping them.
209 <case TARGET_SYS_mprotect>: When checking, allow any length
210 argument. Don't actually do anything.
211 <case TARGET_SYS_writev>: New case.
213 * cris/Makefile.in (SIM_OBJS): Remove sim-hload.o.
214 * cris/sim-if.c: Include elf-bfd.h.
215 (struct progbounds): New members end_loadmem, start_nonloadmem.
216 (xprintf, eprintf): New functions, copied from common/sim-load.c.
217 (cris_load_elf_file, sim_load, cris_get_progbounds): New functions.
218 (get_progbounds_iterator): Renamed from get_progbounds. Make
219 static. Update head comment. Set new struct progbounds members.
220 (exec_load_addr, interp_load_addr, interp_start_addr): New static
222 (aux_ent_phdr, aux_ent_phent, aux_ent_phnum, aux_ent_base)
223 (aux_ent_entry, cris_write_interp, cris_handle_interpreter): New
225 (sim_open): New constant array auxv_entries. Rewrite AUX_ENT
226 handling to use auxv_entries. Improve error message and checking
227 for invalid programs. Use new variable abfd for the program
228 instead of for each access reaching into sd to get it.
229 (sim_create_inferior): If non-zero, use interp_start_addr instead
230 of the program start address.
231 (cris_disassemble_insn): Remove incorrect and unclear, supposedly
232 stale comment. Always specify little-endian.
234 2008-07-29 Nick Clifton <nickc@redhat.com>
236 * common/genmloop.sh: Add new parameter: -shell to specify the
237 command interpreter to use to run the input file. This is
238 necessary because otherwise SHELL is taken from the user's
239 environment, and not from the makefile that invoked this script
240 and the user might not be running an sh-like shell.
241 * cris/Makefile.in: Pass -shell parameter to genmloop.sh.
242 * fr30/Makefile.in: Likewise.
243 * frv/Makefile.in: Likewise.
244 * i960/Makefile.in: Likewise.
245 * iq2000/Makefile.in: Likewise.
246 * m32r/Makefile.in: Likewise.
248 * frv/mloop.in: Add missing start of line comment marker.
250 2008-07-11 Hans-Peter Nilsson <hp@axis.com>
252 * cris/configure: Regenerate to track ../common/common.m4 changes.
253 * cris/config.in: Ditto.
255 2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
256 Daniel Jacobowitz <dan@codesourcery.com>
257 Joseph Myers <joseph@codesourcery.com>
259 * cris/configure: Regenerate.
261 2008-05-09 Olivier Hainque <hainque@adacore.com>
263 * ppc/altivec.igen (vperm): Latch inputs into temporaries.
265 2008-03-25 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
267 * MAINTAINERS: Add myself as maintainer of cr16 port.
269 2008-02-12 M Ranga Swami Reddy <MR.Swami.Reddy@nsc.com>
271 Add simulator for National cr16 processor.
272 * cr16: New directory.
273 * configure.ac: Add entry for National cr16.
274 * configure: Regenerate.
276 2008-02-05 DJ Delorie <dj@redhat.com>
278 * configure.ac (v850): V850 now has a testsuite.
279 * configure (v850): Likewise.
281 2008-01-01 Daniel Jacobowitz <dan@codesourcery.com>
283 Updated copyright notices for most files.
285 2007-12-19 DJ Delorie <dj@redhat.com>
287 * frv/frv.c (frvbf_cut): Only look at the six LSBs of
290 2007-10-22 Hans-Peter Nilsson <hp@axis.com>
292 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
293 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
294 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
295 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
296 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
297 cris/semcrisv32f-switch.c: Regenerate.
299 2007-08-24 Joel Brobecker <brobecker@adacore.com>
301 Switch the license of all files explicitly copyright the FSF
304 2007-03-27 Brooks Moses <brooks.moses@codesourcery.com>
306 * Makefile.in: Add dummy "pdf" target.
308 2007-02-20 Hans-Peter Nilsson <hp@axis.com>
310 * cris/traps.c (dump_statistics): Change format for cycle numbers
311 to %llu and cast parameters to unsigned long long.
313 2007-02-16 Thiemo Seufer <ths@mips.com>
315 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Add RUNTEST.
317 2007-01-28 Manuel Lauss <slauss@resi.at>
319 * configure.ac (sh64-*-*): Change to sh64*-*-*.
320 (sh-*-*): Change to sh*-*-*.
321 * configure: Regenerated.
323 2007-01-09 Daniel Jacobowitz <dan@codesourcery.com>
325 Updated copyright notices for most files.
327 2006-12-20 Hans-Peter Nilsson <hp@axis.com>
329 * Makefile.in (autoconf-common autoheader-common): Only run
330 autoheader on subdirs with a file config.in.
332 * configure.ac (common): Make the default "yes" for all targets
334 * configure: Regenerate.
336 * Makefile.in (autoconf-common autoheader-common): In documented
337 usage, say SHELL=/bin/sh.
338 (.PHONY): Add autoheader-common.
340 * MAINTAINERS: Add self as authorized committer for *.
342 2006-10-02 Edgar E. Iglesias <edgar@axis.com>
343 Hans-Peter Nilsson <hp@axis.com>
345 * cris/cris-sim.h (enum cris_unknown_syscall_action_type)
346 (cris_unknown_syscall_action): Declare.
347 * cris/sim-if.c (cris_unknown_syscall_action): Define.
348 (cris_options): Add cris-unknown-syscall option.
349 (cris_option_handler): Correct comment about and error message for
350 invalid --cris-cycles argument. Handle --cris-unknown-syscall.
351 * cris/traps.c: Include stdarg.h
352 (cris_unknown_syscall): New function.
353 (cris_break_13_handler): Instead of sim_io_eprintf and
354 sim_engine_halt, call cris_unknown_syscall to handle more or less
355 unknown syscalls. Adjust code as necessary to handle return
358 2006-09-30 Daniel Jacobowitz <dan@codesourcery.com>
360 * MAINTAINERS: Add Dave Brolley for sh64.
362 2006-09-30 Hans-Peter Nilsson <hp@axis.com>
364 * cris/traps.c (TARGET_PIPE_BUF): New macro.
365 (cris_pipe_empty): Correct initialization of "remaining". Only
366 adjust the "write" return value if more than TARGET_PIPE_BUF bytes
369 2006-09-29 Hans-Peter Nilsson <hp@axis.com>
371 * cris/configure.ac: Check for limits.h and sys/param.h.
372 * cris/configure, cris/config.in: Rebuild.
373 * cris/traps.c (SIM_PATHMAX): New macro.
374 (cris_break_13_handler): Use SIM_PATHMAX, not MAXPATHLEN.
376 2006-08-08 Joel Sherrill <joel.sherrill@oarcorp.com>
378 * configure.ac (sparc-*-rtems*|sparc-*-elf*): Enable erc32 simulator.
379 * Makefile.in (FLAGS_TO_PASS): Include libdir.
380 * configure: Regenerated.
382 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
384 * cris/configure: Regenerated.
386 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
388 * cris/configure: Regenerated.
390 2006-05-05 Andreas Schwab <schwab@suse.de>
392 * configure.ac (CFLAGS_FOR_BUILD): Set and substitute.
393 * configure: Regenerate.
395 * Makefile.in (CFLAGS_FOR_BUILD): Define.
396 (CC_FOR_BUILD): Don't override.
397 (FLAGS_TO_PASS): Pass CFLAGS_FOR_BUILD.
399 2006-05-04 Daniel Jacobowitz <dan@codesourcery.com>
401 * MAINTAINERS: Add an "Authorized committers" section, and list
404 2006-04-08 Hans-Peter Nilsson <hp@axis.com>
406 * cris/crisv32f.c (MY (deliver_interrupt)): Set CCS to new_ccs.
408 2006-04-03 Hans-Peter Nilsson <hp@axis.com>
410 * cris/dv-cris.c, cris/dv-rv.c, cris/rvdummy.c: New files.
411 * cris/Makefile.in (CONFIG_DEVICES): Remove redundant setting.
412 (dv-cris.o, dv-rv.o rvdummy$(EXEEXT), rvdummy.o): New rules.
413 (all): Depend on rvdummy$(EXEEXT).
414 * cris/configure.ac: Call SIM_AC_OPTION_WARNINGS. Check for
415 sys/socket.h and sys/select.h. Call SIM_AC_OPTION_HARDWARE,
417 * cris/configure: Regenerate.
418 * cris/cris-sim.h (cris_have_900000xxif): Declare here.
419 (enum cris_interrupt_type, crisv10deliver_interrupt)
420 (crisv32deliver_interrupt: New declarations.
421 * cris/cris-tmpl.c [WITH_HW] (MY (f_model_insn_after)): Call
422 sim_events_tickn and set state-events member work_pending when it's
423 time for the next event.
424 [WITH_HW] (MY (f_specific_init)): Set CPU-model-specific
425 interrupt-delivery function.
426 * cris/crisv10f.c (MY (deliver_interrupt)): New function.
427 * cris/crisv32f.c (MY (deliver_interrupt)): New function.
428 * cris/devices.c: Include hw-device.h.
429 (device_io_read_buffer) [WITH_HW]: Call hw_io_read_buffer.
430 (device_io_write_buffer): Only perform 0x900000xx-functions if
431 cris_have_900000xxif is nonzero. Else if WITH_HW defined,
432 call hw_io_write_buffer. Add return 0 last in function.
433 * cris/sim-if.c (cris_have_900000xxif): Now global.
434 (sim_open) [WITH_HW]: Clear deliver_interrupt cpu member.
435 Force "-model" option, effectively.
436 * cris/sim-main.h (cris_interrupt_delivery_fn): New type.
437 (struct _sim_cpu) [WITH_HW]: New member deliver_interrupt.
439 2006-04-02 Hans-Peter Nilsson <hp@axis.com>
441 * cris/Makefile.in (CRISV10F_OBJS): Remove semcrisv10f-switch.o.
442 (CRISV32F_OBJS): Remove semcrisv32f-switch.o.
443 (semcrisv10f-switch.o, semcrisv32f-switch.o: Remove dependency rules.
445 2006-03-13 DJ Delorie <dj@redhat.com>
447 * MAINTAINERS: Add self as m32c sim maintainer.
449 2006-02-23 Hans-Peter Nilsson <hp@axis.com>
451 * cris/traps.c (syscall_map): Remove CB_SYS_time / TARGET_SYS_time
453 (cris_break_13_handler) <case TARGET_SYS_time>: New case.
455 2006-01-23 Jim Blandy <jimb@redhat.com>
457 Add simulator for Renesas M32C and M16C.
459 * m32c: New directory.
460 * configure.ac: Add entry for Renesas M32C.
461 * configure: Regenerate.
463 2006-01-10 Hans-Peter Nilsson <hp@axis.com>
465 * cris/cris-tmpl.c (MY (f_model_insn_before)): Only display basic
466 cycle count for the current insn.
468 2005-12-06 Hans-Peter Nilsson <hp@axis.com>
470 * cris/cpuv10.h, cris/cpuv32.h, cris/cris-desc.c, cris/cris-opc.h,
471 cris/decodev10.c, cris/decodev10.h, cris/decodev32.c,
472 cris/decodev32.h, cris/modelv10.c, cris/modelv32.c,
473 cris/semcrisv10f-switch.c, cris/semcrisv32f-switch.c: Regenerate.
475 2005-12-05 Hans-Peter Nilsson <hp@axis.com>
477 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
478 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
479 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
480 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
481 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
482 cris/semcrisv32f-switch.c: Regenerate.
484 2005-11-20 Hans-Peter Nilsson <hp@axis.com>
486 * cris/traps.c (TARGET_O_RDONLY, TARGET_O_WRONLY): Define.
487 (open_map): Use TARGET_O_ACCMODE, TARGET_O_RDONLY and
489 (cris_break_13_handler) <case TARGET_SYS_fcntl>: Add support for
490 F_GETFL on fd 0, 1 and 2.
492 2005-11-17 Hans-Peter Nilsson <hp@axis.com>
494 * cris/sim-main.h (struct _sim_cpu): New members last_syscall,
495 last_open_fd, last_open_flags.
496 * cris/traps.c: Don't include targ-vals.h.
497 (TARGET_O_ACCMODE): Define.
498 (cris_break_13_handler): Set new _sim_cpu members.
499 <case TARGET_SYS_fcntl>: Support special case of F_GETFL.
500 Rearrange code as switch. Emit "unimplemented" abort for
501 unimplemented fcntl calls.
503 * cris/traps.c (TARGET_SYS_stat): Define.
504 (syscall_stat32_map): Add entry for TARGET_SYS_stat.
505 (cris_break_13_handler) <case TARGET_SYS_stat>: New case.
507 2005-11-16 Hans-Peter Nilsson <hp@axis.com>
509 * cris/cris-tmpl.c (MY (f_model_insn_before)): Make sure only the
510 low 32 bits are used after an unsigned long cast.
512 2005-05-28 Hans-Peter Nilsson <hp@axis.com>
514 * cris/Makefile.in (stamp-v32fmloop): Depend on stamp-v10fmloop.
516 2005-05-26 Chris Demetriou <cgd@netbsd.org>
518 * MAINTAINERS: Update my mail address, move myself to the
519 "Past maintainers" section.
521 2005-05-17 Corinna Vinschen <vinschen@redhat.com>
523 * configure.ac: Add igen to v850 build.
524 * configure: Regenerate.
526 2005-04-29 Paul Brook <paul@codesourcery.com>
528 * common/callback.c (PIPE_BUF): Provide default definition.
529 (os_lstat): Use stat if lstat is not available on the host.
530 (os_ftruncate): Return EINVAL if not available on the host.
531 (os_truncate): Ditto.
532 * common/configure.ac: Check for lstat, truncate and ftruncate.
533 * common/configure: Regenerate.
534 * common/config.in: Regenerate.
536 2005-04-27 Paul Brook <paul@codesourcery.com>
538 * common/Make-common.in: Add $(EXEEXT) to "run".
540 2005-04-18 Hans-Peter Nilsson <hp@axis.com>
542 * cris/traps.c (cris_break_13_handler) <case TARGET_SYS_mmap2>:
543 For ((len & 8191) != 0 && fd == (USI) -1), don't say this isn't
544 implemented. In call to create_map, pad length argument to 8k.
546 2005-04-15 Corinna Vinschen <vinschen@redhat.com>
548 * configure.ac: Add explicit sh64 case.
549 * configure: Regenerate.
551 2005-03-30 Paul Brook <paul@codesourcery.com>
553 * arm/wrapper.c: Provide SIGTRAP and SIGBUS.
555 2005-03-24 Hans-Peter Nilsson <hp@axis.com>
557 * cris/Makefile.in (stamp-v10fcpu, stamp-v32fcpu): Add kludge to
558 include cgen-ops.h in decodev10.c and decodev32.c.
559 * cris/sim-main.h: Don't include cgen-ops.h here.
560 * cris/arch.c, cris/arch.h, cris/cpuall.h, cris/cpuv10.c,
561 cris/cpuv10.h, cris/cpuv32.c, cris/cpuv32.h, cris/cris-desc.c,
562 cris/cris-desc.h, cris/cris-opc.h, cris/decodev10.c,
563 cris/decodev10.h, cris/decodev32.c, cris/decodev32.h,
564 cris/modelv10.c, cris/modelv32.c, cris/semcrisv10f-switch.c,
565 cris/semcrisv32f-switch.c: Regenerate.
567 * cris/traps.c (cris_break_13_handler) <case
568 TARGET_SYS_rt_sigaction>: Rename sa_handler, sa_flags,
569 sa_restorer, sa_mask_low, sa_mask_high to target_sa_handler etc.
571 2005-03-23 Mark Kettenis <kettenis@gnu.org>
573 * cris/configure: Regenerate.
575 2005-02-28 Jim Blandy <jimb@redhat.com>
577 * d10v/configure.ac, igen/configure.ac, m68hc11/configure.ac,
578 mips/configure.ac, mn10300/configure.ac, v850/configure.ac:
579 Regenerated, after change to common/aclocal.m4.
581 2005-02-18 Corinna Vinschen <vinschen@redhat.com>
583 * iq2000: New target subdirectory.
584 * configure.ac: Add iq2000 target.
585 * configure: Regenerate.
587 2005-01-29 Hans-Peter Nilsson <hp@axis.com>
589 * Makefile.in (all, clean mostlyclean, distclean maintainer-clean)
590 (realclean, install): Fail if subdir make failed.
592 2005-01-28 Hans-Peter Nilsson <hp@axis.com>
594 * cris: New directory, simulator for Axis Communications CRIS
595 including CRIS v32, CGEN-based.
596 * configure.ac: Add corresponding configury.
597 * configure: Regenerate.
599 2005-01-17 Andrew Cagney <cagney@gnu.org>
601 * configure.ac: For mips*-*-* and mn10300*-*-* configure the
602 common directory. Remove sparc*-*-* from list.
604 2005-01-11 Andrew Cagney <cagney@gnu.org>
606 * Makefile.in (autoconf-common autoheader-common): Add --force to
607 autoconf and autoheader.
608 (autoconf-common autoheader-common)
609 (autoconf-install autoheader-install): Check for configure.ac, not
611 * configure.ac: Delete AC_CONFIG_AUX_DIR.
612 * configure: Re-generate.
614 2005-01-07 Andrew Cagney <cagney@gnu.org>
616 * configure.ac: Replace configure.in. Requires autoconf 2.59 and
617 correctly calls AC_CONFIG_SUBDIRS.
618 * configure: Re-generate.
620 2004-12-01 Andrew Cagney <cagney@gnu.org>
622 * i960, h8500: Delete directory.
624 2004-11-12 Andrew Cagney <cagney@gnu.org>
626 * d30v, fr30, mn10200, z8k: Delete directory.
628 2004-03-10 Ben Elliston <bje@gnu.org>
630 * MAINTAINERS: Update my mail address.
632 2004-01-26 Chris Demetriou <cgd@broadcom.com>
634 * configure.in (mips*-*-*): Configure in testsuite.
635 * configure: Regenerate.
637 2003-10-08 Dave Brolley <brolley@redhat.com>
639 * configure.in: Move frv handling to alphabetically correct placement.
641 2003-09-03 Andreas Schwab <schwab@suse.de>
643 * Makefile.in (FLAGS_TO_PASS): Pass down $(bindir) and $(mandir).
645 2003-08-29 Dave Brolley <brolley@redhat.com>
647 * MAINTAINERS: Add myself as maintainer of the FRV port.
649 2003-08-20 Michael Snyder <msnyder@redhat.com>
650 Dave Brolley <brolley@redhat.com>
652 * frv/: New directory, simulator for the Fujitsu FRV.
653 * configure.in: Add frv configury.
654 * configure: Regenerate.
656 2003-08-10 Ben Elliston <bje@wasabisystems.com>
658 * MAINTAINERS: Update my mail address.
660 2003-08-09 Andrew Cagney <cagney@redhat.com>
662 * MAINTAINERS: Andrew Cagney (mips) and Geoff Keating (ppc) drop
663 maintenance. List igen and sh maintainers. Mention that target
664 and global maintainers pick up the slack.
666 2003-07-09 Michael Snyder <msnyder@redhat.com>
668 * configure.in: Add testsuite to extra_subdirs for sh.
669 * configure: Regenerate.
671 2003-01-23 Nick Clifton <nickc@redhat.com>
675 2002-04-02 Alexandre Oliva <aoliva@redhat.com>
677 * sh/gencode.c: Replace sh3e with sh2e except in fsqrt.
679 2002-08-24 Geoffrey Keating <geoffk@redhat.com>
681 * MAINTAINERS: Update my email address.
683 2002-07-17 Andrew Cagney <ac131313@redhat.com>
685 * w65/: Delete directory.
687 2002-07-16 Andrew Cagney <ac131313@redhat.com>
689 * configure.in (extra_subdirs): Mark fr30-*-* as obsolete.
690 * configure: Re-generate.
692 2002-07-13 Andrew Cagney <ac131313@redhat.com>
694 * configure.in (extra_subdirs): Mark d30v-*-* as obsolete.
695 * configure: Re-generate.
697 2002-06-16 Andrew Cagney <ac131313@redhat.com>
699 * Makefile.in (autoconf-changelog autoheader-changelog): Let name,
700 id, date and host to be overriden by NAME, ID, DATE and HOST
701 respectfully. Use ISO dates.
703 Thu Jun 6 12:34:13 2002 Andrew Cagney <cagney@redhat.com>
705 * Makefile.in (ChangeLog): New makefile variable.
706 * README-HACKING: Mention the ChangeLog makefile variable.
708 2002-06-01 Andrew Cagney <ac131313@redhat.com>
710 * tic80/: Delete directory.
712 2002-05-16 Stephane Carrez <stcarrez@nerim.fr>
714 * MAINTAINERS: Update my email address.
716 2002-03-06 Stephane Carrez <Stephane.Carrez@worldnet.fr>
718 * MAINTAINERS: Record self as maintainer of m68hc11 simulator.
720 2002-03-01 Frank Ch. Eigler <fche@redhat.com>
722 * MAINTAINERS: Record self as a co-maintainer of just common/.
724 2002-02-07 Nick Clifton <nickc@cambridge.redhat.com>
726 * MAINTAINERS: Point to GDB files describing overall maintaince
727 and check-in procedures.
729 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com>
731 * MAINTAINERS: Add myself for ARM portions.
733 2001-10-19 Andrew Cagney <ac131313@redhat.com>
735 * configure.in: When Linux or NetBSD, enable PowerPC simulator.
736 * configure: Re-generate.
738 2001-02-16 Ben Elliston <bje@redhat.com>
740 * MAINTAINERS: Add myself for common portions.
742 2001-01-15 Chris Demetriou <cgd@broadcom.com>
744 * MAINTAINERS: Added self and Andrew for the mips sim.
746 2000-10-25 Geoff Keating <geoffk@cygnus.com>
748 * MAINTAINERS: Added self and Andrew for the ppc sim.
750 Thu Jul 27 21:26:26 2000 Andrew Cagney <cagney@b1.cygnus.com>
752 From Stephane Carrez <Stephane.Carrez@worldnet.fr>:
753 * m68hc11: New directory.
755 * configure: Regenerate.
757 Tue Jul 4 13:43:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
759 * tic80: New directory.
760 * configure.in: Add configury.
761 * configure: Regenerate.
763 2000-04-20 Nick Clifton <nickc@cygnus.com>
765 * configure.in (extra_subdirs): Add testsuite to strongarm
767 * configure: Regenerate.
769 Sat Mar 4 16:48:54 2000 Andrew Cagney <cagney@b1.cygnus.com>
771 * MAINTAINERS: New file. Blank.
773 1999-11-18 Ben Elliston <bje@cygnus.com>
775 * configure.in: Require autoconf 2.13 and remove obsolete
776 invocation of AC_C_CROSS.
777 * configure: Regenerate.
779 1999-09-29 Doug Evans <devans@casey.cygnus.com>
781 * configure.in: Configure the testsuite directory for thumb.
782 * configure: Regenerate.
784 1999-07-16 Ben Elliston <bje@cygnus.com>
786 * configure.in: Configure the testsuite directory for arm.
787 * configure: Regenerate.
789 1999-04-08 Nick Clifton <nickc@cygnus.com>
791 * configure.in: Add support for MCore target.
792 * configure: Regenerate.
794 1999-03-14 Stan Shebs <shebs@andros.cygnus.com>
796 * Makefile.in (FLAGS_TO_PASS, TARGET_FLAGS_TO_PASS): Remove
797 RUNTEST instead of commenting out, fixes portability problem.
799 1999-02-08 Nick Clifton <nickc@cygnus.com>
801 * configure.in: Add support for StrongARM target.
802 * configure: Regenerate.
804 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
806 * configure.in: Require autoconf 2.12.1 or higher.
808 1998-12-08 James E Wilson <wilson@wilson-pc.cygnus.com>
810 * configure.in (i960-*-*): Add.
811 * configure: Rebuild.
813 Wed Nov 4 19:11:43 1998 Dave Brolley <brolley@cygnus.com>
815 * configure.in: Added case for fr30-*-*.
816 * configure: Regenerated.
818 Fri Sep 25 10:12:19 1998 Christopher Faylor <cgf@cygnus.com>
820 * ppc/Makefile.in: Add EXEEXT to installed powerpc-eabi-run program
821 to allow successful operation on Windows.
823 Thu May 28 14:59:46 1998 Jillian Ye <jillian@cygnus.com>
825 * Makefile.in: Take RUNTEST out of FLAGS_TO_PASS so that make
826 check can be invoked recursively.
828 Wed Apr 29 12:38:53 1998 Mark Alexander <marka@cygnus.com>
830 * configure.in: Build simulator on sparclite and sparc86x targets.
831 * configure: Regenerate.
833 Sun Apr 26 15:21:01 1998 Tom Tromey <tromey@cygnus.com>
835 * Makefile.in (autoconf-common autoheader-common): Don't pass -l
836 to autoconf and autoheader.
838 Fri Apr 24 11:14:13 1998 Tom Tromey <tromey@cygnus.com>
840 * Makefile.in (autoconf-common autoheader-common): Pass `-l
841 ../common' to autoconf and autoheader. Unconditionally run
842 autoconf in every subdir.
843 (autoconf-changelog autoheader-changelog): Unconditionally run
844 commands in every subdir.
845 (autoconf-install autoheader-install): Likewise.
847 Tue Mar 24 17:12:43 1998 Stu Grossman <grossman@bhuna.cygnus.co.uk>
849 * Makefile.in: Get SHELL from configure.
850 * (FLAGS_TO_PASS): Pass down SHELL.
851 * configure: Regenerate with autoconf 2.12.1 to fix shell issues for
854 Tue Mar 24 11::18:00 1998 Joyce Janczyn <janczyn@cygnus.com>
856 * configure.in (extra_subdirs): Enable igen for mn10300.
857 * configure: Re-generate.
859 Tue Dec 2 10:10:42 1997 Nick Clifton <nickc@cygnus.com>
861 * configure.in (extra_subdirs): Add support for thumb target.
863 * configure (extra_subdirs): Add support for thumb target.
865 Wed Oct 8 12:38:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
867 * configure.in (extra_subdirs): Add IGEN directory when MIPS
869 * configure: Regenerate.
871 Fri Sep 12 13:10:31 1997 Andrew Cagney <cagney@b1.cygnus.com>
873 * configure.in (extra_subdirs): v850ea needs igen.
874 * configure: Re-generate.
876 Mon Sep 1 16:48:23 1997 Andrew Cagney <cagney@b1.cygnus.com>
878 * configure.in (testdir): When a testsuite directory, add that to
879 the list of confdirs.
881 Tue Aug 19 11:17:46 1997 Andrew Cagney <cagney@b1.cygnus.com>
883 * configure.in (extra_subdirs): Enable igen ready for V850.
885 Tue Aug 26 15:14:48 1997 Andrew Cagney <cagney@b1.cygnus.com>
887 * configure.in (w65-*-*, only_if_enabled): Set.
888 * configure: Re-generate.
890 Mon Aug 25 16:26:53 1997 Andrew Cagney <cagney@b1.cygnus.com>
892 * configure.in (sparc*-*-*, only_if_enabled): Set
893 only_if_enabled=yes. Check only_if_enabled before enabling a
895 * configure: Regenerate.
897 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
899 * configure.in (extra_subdirs): Add v850e target.
901 Mon Aug 18 10:56:59 1997 Nick Clifton <nickc@cygnus.com>
903 * configure.in (extra_subdirs): Add v850ea target.
905 Fri Jul 25 11:40:47 1997 Doug Evans <dje@canuck.cygnus.com>
907 * configure.in (sparc*-*-*): Don't build erc32.
908 * configure: Regenerate.
910 Thu Apr 24 00:47:20 1997 Doug Evans <dje@canuck.cygnus.com>
912 * configure.in (m32r-*-*): New target.
913 * configure: Regenerate.
915 * Makefile.in (autoconf-common, autoconf-changelog): Change $* to $@.
917 Mon Apr 21 22:57:55 1997 Andrew Cagney <cagney@b1.cygnus.com>
919 * Makefile.in (.NOEXPORT, MAKEOVERRIDES): Moved to end, BSD make
920 thought that .NOEXPORT was the default target.
922 Fri Apr 11 17:18:07 1997 Ian Lance Taylor <ian@cygnus.com>
924 * Makefile.in (clean mostlyclean): Restore targets accidentally
925 deleted in earlier change.
927 Thu Apr 3 12:20:32 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
929 * Makefile.in (autoheader-common, autoheader-changelog,
930 autoheader-install): Perform autoheader in addition to autoconf.
932 Wed Apr 2 15:09:05 1997 Doug Evans <dje@canuck.cygnus.com>
934 * Makefile.in (autoconf-install): New target.
935 (autoconf-changelog): Try different way to obtain user name.
937 Wed Apr 2 14:25:52 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
939 * Makefile.in (autoconf-changelog): New target, update
940 ChangeLog for all subdirectories - normally used after
941 autoconf-common target.
943 Wed Mar 19 14:26:21 1997 Andrew Cagney <cagney@kremvax.cygnus.com>
945 * configure.in (extra_subdirs): Include testsuite for d30v.
946 * configure: Regenerate.
948 * Makefile.in (RUNTEST, RUNTESTFLAGS): Borrow test rules from
950 (check): New rules - drive the testsuite.
952 Mon Mar 3 13:01:00 1997 Jeffrey A Law (law@cygnus.com)
954 * configure.in: Add mn10200 configure lines accidentally
956 * configure: Regenerated.
958 Wed Feb 19 10:34:20 1997 Andrew Cagney <cagney@critters.cygnus.com>
960 * configure.in (extra_subdirs): Generalize common sub directory
962 (extra_subdirs): For d30v add igen to the list to be built.
964 Sun Feb 16 16:37:47 1997 Andrew Cagney <cagney@critters.cygnus.com>
966 * configure.in (d30v): New target.
967 * configure: Regenerated.
969 Wed Feb 19 23:17:13 1997 Jeffrey A Law (law@cygnus.com)
971 * configure.in: Don't require GCC to build the mn10200
973 * configure: Rebuilt.
975 Wed Feb 5 13:28:13 1997 Doug Evans <dje@canuck.cygnus.com>
977 * configure.in: Don't configure any subdirs if no simulator
978 is being built. Don't use erc32 for sparc64.
979 * configure: Regenerated.
981 Tue Feb 4 13:19:39 1997 Doug Evans <dje@canuck.cygnus.com>
983 * Makefile.in (autoconf-common): New target.
984 * configure.in: Do configure common.
985 * configure: Regenerated.
987 Thu Jan 23 13:59:52 1997 Stu Grossman (grossman@critters.cygnus.com)
989 * configure configure.in: Don't configure common anymore. Files
990 from common are now built in the individual simualtor directories.
991 This fixes problems with the WinGDB build procedure.
993 Mon Jan 13 13:16:42 1997 Jeffrey A Law (law@cygnus.com)
995 * configure: Enable the mn10200 simulator.
997 Wed Nov 20 01:00:36 1996 Doug Evans <dje@canuck.cygnus.com>
999 * configure.in (configdirs): Add common.
1000 * configure: Regenerated.
1002 Fri Nov 1 08:03:30 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1004 * configure.in (powerpc*-*-linux*): Treat like the other powerpc
1005 system V based targets.
1006 * configure: Regenerate.
1008 Thu Oct 17 12:50:08 1996 Doug Evans <dje@canuck.cygnus.com>
1010 * configure.in (--enable-sim-powerpc): Delete.
1011 (--enable-sim): Add.
1012 * configure: Regenerated.
1014 Fri Oct 11 21:13:43 1996 Jeffrey A Law (law@cygnus.com)
1016 * configure.in: Only build the V850 simulator if
1018 * configure: Rebuild.
1020 Sun Sep 8 17:22:50 1996 Ian Lance Taylor <ian@cygnus.com>
1022 * configure.in: Do build erc32 for DOS and Windows hosts.
1023 * configure: Rebuild.
1025 Wed Sep 4 18:11:27 1996 Stu Grossman (grossman@critters.cygnus.com)
1027 * Makefile.in erc32/Makefile.in: Don't set srcroot. This should
1028 be inherited from the parent. Remove INSTALL_XFORM and
1029 INSTALL_XFORM1. Make INSTALL be set from configure.
1031 Wed Sep 4 15:49:16 1996 Ian Lance Taylor <ian@cygnus.com>
1033 * configure.in: Only build the MIPS simulator if we are using
1035 * configure: Rebuild.
1037 Wed Aug 28 19:05:23 1996 Jeffrey A Law (law@cygnus.com)
1039 * configure.in (v850-*-*): Added V850 simulator.
1041 Thu Aug 1 17:08:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1043 * configure.in (d10v-*-*): Added D10V simulator.
1045 Wed Jun 26 12:33:57 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1047 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
1048 INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
1050 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1051 (AC_PROG_INSTALL): Added.
1052 * configure: Rebuilt.
1054 Mon Jun 24 14:18:26 1996 Ian Lance Taylor <ian@cygnus.com>
1056 * configure.in: Only configure erc32 if using gcc.
1057 * configure: Rebuild.
1059 Tue Jun 4 09:24:21 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1061 * configure.in (sim_target): Build PowerPC simulator for powerpc
1062 System V.4, Solaris, and Elf targets.
1063 * configure: Regenerate with autoconf 2.10.
1065 Wed May 22 12:10:49 1996 Rob Savoye <rob@chinadoll>
1067 * configure.in: Only built erc32 simulator on Unix hosts as it
1069 * configure: Regenerated with autoconf 2.8.
1071 Sun May 19 20:20:40 1996 Rob Savoye <rob@chinadoll.cygnus.com>
1073 * erc32: Sparc simulator from the ESA.
1075 Sun Apr 7 21:00:09 1996 Fred Fish <fnf@cygnus.com>
1077 From: Miles Bader <miles@gnu.ai.mit.edu>
1078 * configure.in: Use AC_CHECK_TOOL to find AR & RANLIB.
1079 * configure: Regenerate using autoconf.
1081 Thu Feb 22 11:31:50 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1083 * Makefile.in (install): Fix typo.
1085 Wed Feb 21 11:59:57 1996 Ian Lance Taylor <ian@cygnus.com>
1087 * configure: Regenerate with autoconf 2.7.
1089 * Makefile.in (all): Simplify.
1090 (clean, mostlyclean): SUBDIRS may contain whitespace; fix the loop
1091 as in the all target.
1092 (distclean, maintainer-clean, realclean): Likewise.
1093 (install): Likewise.
1095 Thu Feb 15 18:37:00 1996 Fred Fish <fnf@cygnus.com>
1097 * Makefile.in (all): Remove extra '\' char from shell script.
1099 Wed Feb 14 16:43:59 1996 Mike Meissner <meissner@tiktok.cygnus.com>
1101 * Makefile.in (all): Avoid a for loop with zero elements, even if
1102 the loop will not be executed because of an if statement.
1104 Wed Jan 31 21:48:34 1996 Fred Fish <fnf@cygnus.com>
1106 * Makefile.in (install): Add missing semicolon in "fi \".
1108 Thu Nov 9 16:10:56 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1110 * Makefile.in (AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB): Pick up
1111 defaults from configure.
1113 * configure.in: Pick up AR, CC, CFLAGS, CC_FOR_BUILD, RANLIB using
1115 (powerpc*-*-eabi*): Build simulator for all powerpc eabi targets
1116 if either --enable-sim-powerpc is used, or the host compiler is
1119 Wed Nov 8 15:46:49 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1121 * configure.in (mips*-*-*): Added "mips" simulator target.
1122 * configure: Re-generated.
1124 Tue Oct 10 11:08:20 1995 Fred Fish <fnf@cygnus.com>
1126 * Makefile.in (BISON): Remove macro.
1127 (FLAGS_TO_PASS): Remove BISON.
1129 Sun Oct 8 04:26:27 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1131 * configure.in: Explicitly `exit 0' for broken shells.
1132 * configure: Rebuilt.
1134 Fri Oct 6 12:03:27 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1136 * common/run.c (main): Initialize the callbacks.
1138 Wed Sep 20 13:34:50 1995 Ian Lance Taylor <ian@cygnus.com>
1140 * Makefile.in (maintainer-clean): New synonym for realclean.
1142 Fri Aug 25 11:53:43 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1144 * configure.in (powerpc*-*-eabisim*): Only build the simulator if
1145 the target is powerpc*-*-eabisim*, since it requires GCC to build.
1147 Mon Aug 21 17:53:48 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1149 * configure.in (powerpc{,le}-*-*): Add psim from Andrew Cagney
1150 <cagney@highland.com.au>.
1151 * configure: Regnerate from configure.in.
1153 Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com>
1155 * Update all FSF addresses except those in COPYING* files.
1157 Thu Jul 20 15:17:29 1995 Fred Fish <fnf@cygnus.com>
1159 * Makefile.in (CC_FOR_BUILD): Define default and arrange to pass
1160 submakes either default or passed in value.
1162 Wed Jul 5 14:32:54 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1164 * Makefile.in (all, clean, distclean, mostlyclean, realclean,
1165 install): Changed targets so that they descend all
1166 subdirectories in $(SUBDIRS).
1167 (*-all, *-clean, *-install): Removed targets.
1169 * configure.in: Don't bother with target makefile fragments, they
1170 are no longer needed.
1171 * configure: regenerated.
1173 * Makefile.in, configure.in: converted to autoconf.
1174 * configure: New file, generated with autconf 2.4.
1176 Wed May 24 14:48:46 1995 Steve Chamberlain <sac@slash.cygnus.com>
1178 * Makefile.in: Support ARM.
1179 * configure.in: Ditto.
1181 Sun Jan 15 16:53:47 1995 Steve Chamberlain <sac@splat>
1183 * Makefile.in: Support W65.
1184 * configure.in: Ditto.
1186 Sun Mar 13 09:27:50 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
1188 * Makefile.in: Add TAGS target.
1190 Mon Sep 13 12:47:15 1993 K. Richard Pixley (rich@sendai.cygnus.com)
1192 * Makefile.in (all-z8k, install-z8k, clean-z8k, all-h8300,
1193 install-h8300, clean-h8300, all-h8500, install-h8500,
1194 clean-h8500, all-sh, install-sh, clean-sh): do not echo
1197 Wed Jun 30 14:12:05 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
1199 * Makefile.in: remove endian.h trace from h8500
1201 Sun Jun 13 13:08:58 1993 Jim Kingdon (kingdon@cygnus.com)
1203 * Makefile.in: Add distclean, realclean, and mostlyclean targets.
1205 Fri May 21 11:21:16 1993 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
1207 * Makefile.in: make all of the all-* target (except all-nothing)
1208 depend on endian.h, so that if we're not building a simulator, we
1211 Fri May 21 10:55:06 1993 Ian Lance Taylor (ian@cygnus.com)
1213 * Makefile.in (check, installcheck): Added dummy targets.
1215 Mon May 3 21:39:43 1993 Fred Fish (fnf@cygnus.com)
1217 * Makefile.in (endian): Find endian.c in $(srcdir), and also
1218 explicitly make it, since some makes apparently don't work with
1219 VPATH and .c to executable rules (SunOS make for example).
1221 Mon May 3 08:29:01 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1223 * Makefile.in (endian): Add explicit rule for broken makes.
1225 Mon Mar 15 15:47:53 1993 Ian Lance Taylor (ian@cygnus.com)
1227 * Makefile.in (info, install-info): New targets.
1228 (DO_INSTALL): Renamed from INSTALL, which is overridden by the top
1231 Wed Feb 10 20:12:27 1993 K. Richard Pixley (rich@ok.cygnus.com)
1233 * Makefile.in (endian.h): build endian.h via a temporary file so
1234 that we don't leave an incomplete file lying around on
1236 (clean): remove endian, e.h, and endian.h.
1238 Mon Feb 8 11:46:06 1993 Steve Chamberlain (sac@thepub.cygnus.com)
1240 * Makefile.in, configure.in: if target isn't supported, build a