service/protocol-plugin/lib/cpluff/examples/cpfile/Makefile.in

   1 # Makefile.in generated by automake 1.11.3 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 # Copyright 2007 Johannes Lehtinen
  19 # This Makefile is free software; Johannes Lehtinen gives unlimited
  20 # permission to copy, distribute and modify it.
  21
  22 VPATH = @srcdir@
  23 pkgdatadir = $(datadir)/@PACKAGE@
  24 pkgincludedir = $(includedir)/@PACKAGE@
  25 pkglibdir = $(libdir)/@PACKAGE@
  26 pkglibexecdir = $(libexecdir)/@PACKAGE@
  27 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  28 install_sh_DATA = $(install_sh) -c -m 644
  29 install_sh_PROGRAM = $(install_sh) -c
  30 install_sh_SCRIPT = $(install_sh) -c
  31 INSTALL_HEADER = $(INSTALL_DATA)
  32 transform = $(program_transform_name)
  33 NORMAL_INSTALL = :
  34 PRE_INSTALL = :
  35 POST_INSTALL = :
  36 NORMAL_UNINSTALL = :
  37 PRE_UNINSTALL = :
  38 POST_UNINSTALL = :
  39 build_triplet = @build@
  40 host_triplet = @host@
  41 subdir = examples/cpfile
  42 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
  43         $(srcdir)/cpfile.in
  44 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  45 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  46 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  47         $(ACLOCAL_M4)
  48 mkinstalldirs = $(install_sh) -d
  49 CONFIG_HEADER = $(top_builddir)/config.h
  50 CONFIG_CLEAN_FILES = cpfile
  51 CONFIG_CLEAN_VPATH_FILES =
  52 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  53 am__vpath_adj = case $$p in \
  54     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  55     *) f=$$p;; \
  56   esac;
  57 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  58 am__install_max = 40
  59 am__nobase_strip_setup = \
  60   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  61 am__nobase_strip = \
  62   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  63 am__nobase_list = $(am__nobase_strip_setup); \
  64   for p in $$list; do echo "$$p $$p"; done | \
  65   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  66   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  67     if (++n[$$2] == $(am__install_max)) \
  68       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  69     END { for (dir in files) print dir, files[dir] }'
  70 am__base_list = \
  71   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  72   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  73 am__uninstall_files_from_dir = { \
  74   test -z "$$files" \
  75     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
  76     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
  77          $(am__cd) "$$dir" && rm -f $$files; }; \
  78   }
  79 am__installdirs = "$(DESTDIR)$(bindir)"
  80 SCRIPTS = $(bin_SCRIPTS)
  81 SOURCES =
  82 DIST_SOURCES =
  83 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  84         html-recursive info-recursive install-data-recursive \
  85         install-dvi-recursive install-exec-recursive \
  86         install-html-recursive install-info-recursive \
  87         install-pdf-recursive install-ps-recursive install-recursive \
  88         installcheck-recursive installdirs-recursive pdf-recursive \
  89         ps-recursive uninstall-recursive
  90 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
  91   distclean-recursive maintainer-clean-recursive
  92 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
  93         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
  94         distdir
  95 ETAGS = etags
  96 CTAGS = ctags
  97 DIST_SUBDIRS = $(SUBDIRS)
  98 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  99 am__relativize = \
 100   dir0=`pwd`; \
 101   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 102   sed_rest='s,^[^/]*/*,,'; \
 103   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 104   sed_butlast='s,/*[^/]*$$,,'; \
 105   while test -n "$$dir1"; do \
 106     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 107     if test "$$first" != "."; then \
 108       if test "$$first" = ".."; then \
 109         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 110         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 111       else \
 112         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 113         if test "$$first2" = "$$first"; then \
 114           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 115         else \
 116           dir2="../$$dir2"; \
 117         fi; \
 118         dir0="$$dir0"/"$$first"; \
 119       fi; \
 120     fi; \
 121     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 122   done; \
 123   reldir="$$dir2"
 124 ACLOCAL = @ACLOCAL@
 125 AMTAR = @AMTAR@
 126 AR = @AR@
 127 AS = @AS@
 128 AUTOCONF = @AUTOCONF@
 129 AUTOHEADER = @AUTOHEADER@
 130 AUTOMAKE = @AUTOMAKE@
 131 AWK = @AWK@
 132 CC = @CC@
 133 CCDEPMODE = @CCDEPMODE@
 134 CFLAGS = @CFLAGS@
 135 CPLUFF_LOADER = @CPLUFF_LOADER@
 136 CPP = @CPP@
 137 CPPFLAGS = @CPPFLAGS@
 138 CP_CXX_LIB_VERSION = @CP_CXX_LIB_VERSION@
 139 CP_C_LIB_VERSION = @CP_C_LIB_VERSION@
 140 CP_VERSION_MAJOR = @CP_VERSION_MAJOR@
 141 CP_VERSION_MINOR = @CP_VERSION_MINOR@
 142 CYGPATH_W = @CYGPATH_W@
 143 DEFS = @DEFS@
 144 DEPDIR = @DEPDIR@
 145 DLLTOOL = @DLLTOOL@
 146 DSYMUTIL = @DSYMUTIL@
 147 DUMPBIN = @DUMPBIN@
 148 ECHO_C = @ECHO_C@
 149 ECHO_N = @ECHO_N@
 150 ECHO_T = @ECHO_T@
 151 EGREP = @EGREP@
 152 EXEEXT = @EXEEXT@
 153 FGREP = @FGREP@
 154 GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
 155 GMSGFMT = @GMSGFMT@
 156 GMSGFMT_015 = @GMSGFMT_015@
 157 GREP = @GREP@
 158 INSTALL = @INSTALL@
 159 INSTALL_DATA = @INSTALL_DATA@
 160 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 161 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 162 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 163 INTLLIBS = @INTLLIBS@
 164 INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
 165 LD = @LD@
 166 LDFLAGS = @LDFLAGS@
 167 LIBICONV = @LIBICONV@
 168 LIBINTL = @LIBINTL@
 169 LIBOBJS = @LIBOBJS@
 170 LIBS = @LIBS@
 171 LIBS_LIBCPLUFF = @LIBS_LIBCPLUFF@
 172 LIBS_OTHER = @LIBS_OTHER@
 173 LIBTOOL = @LIBTOOL@
 174 LIB_READLINE = @LIB_READLINE@
 175 LIPO = @LIPO@
 176 LN_S = @LN_S@
 177 LTLIBICONV = @LTLIBICONV@
 178 LTLIBINTL = @LTLIBINTL@
 179 LTLIBOBJS = @LTLIBOBJS@
 180 MAKEINFO = @MAKEINFO@
 181 MANIFEST_TOOL = @MANIFEST_TOOL@
 182 MKDIR_P = @MKDIR_P@
 183 MSGFMT = @MSGFMT@
 184 MSGFMT_015 = @MSGFMT_015@
 185 MSGMERGE = @MSGMERGE@
 186 NM = @NM@
 187 NMEDIT = @NMEDIT@
 188 OBJDUMP = @OBJDUMP@
 189 OBJEXT = @OBJEXT@
 190 OTOOL = @OTOOL@
 191 OTOOL64 = @OTOOL64@
 192 PACKAGE = @PACKAGE@
 193 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 194 PACKAGE_NAME = @PACKAGE_NAME@
 195 PACKAGE_STRING = @PACKAGE_STRING@
 196 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 197 PACKAGE_URL = @PACKAGE_URL@
 198 PACKAGE_VERSION = @PACKAGE_VERSION@
 199 PATH_SEPARATOR = @PATH_SEPARATOR@
 200 POSUB = @POSUB@
 201 RANLIB = @RANLIB@
 202 SED = @SED@
 203 SET_MAKE = @SET_MAKE@
 204 SHELL = @SHELL@
 205 STRIP = @STRIP@
 206 USE_NLS = @USE_NLS@
 207 VERSION = @VERSION@
 208 XGETTEXT = @XGETTEXT@
 209 XGETTEXT_015 = @XGETTEXT_015@
 210 XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
 211 abs_builddir = @abs_builddir@
 212 abs_srcdir = @abs_srcdir@
 213 abs_top_builddir = @abs_top_builddir@
 214 abs_top_srcdir = @abs_top_srcdir@
 215 ac_ct_AR = @ac_ct_AR@
 216 ac_ct_CC = @ac_ct_CC@
 217 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 218 am__include = @am__include@
 219 am__leading_dot = @am__leading_dot@
 220 am__quote = @am__quote@
 221 am__tar = @am__tar@
 222 am__untar = @am__untar@
 223 bindir = @bindir@
 224 build = @build@
 225 build_alias = @build_alias@
 226 build_cpu = @build_cpu@
 227 build_os = @build_os@
 228 build_vendor = @build_vendor@
 229 builddir = @builddir@
 230 datadir = @datadir@
 231 datarootdir = @datarootdir@
 232 docdir = @docdir@
 233 dvidir = @dvidir@
 234 exec_prefix = @exec_prefix@
 235 host = @host@
 236 host_alias = @host_alias@
 237 host_cpu = @host_cpu@
 238 host_os = @host_os@
 239 host_vendor = @host_vendor@
 240 htmldir = @htmldir@
 241 includedir = @includedir@
 242 infodir = @infodir@
 243 install_sh = @install_sh@
 244 libdir = @libdir@
 245 libexecdir = @libexecdir@
 246 localedir = @localedir@
 247 localstatedir = @localstatedir@
 248 mandir = @mandir@
 249 mkdir_p = @mkdir_p@
 250 oldincludedir = @oldincludedir@
 251 pdfdir = @pdfdir@
 252 prefix = @prefix@
 253 program_transform_name = @program_transform_name@
 254 psdir = @psdir@
 255 sbindir = @sbindir@
 256 sharedstatedir = @sharedstatedir@
 257 srcdir = @srcdir@
 258 sysconfdir = @sysconfdir@
 259 target_alias = @target_alias@
 260 top_build_prefix = @top_build_prefix@
 261 top_builddir = @top_builddir@
 262 top_srcdir = @top_srcdir@
 263 SUBDIRS = plugins
 264 EXTRA_DIST = README.txt cpfile.in cpfile.bat Makefile.nmake
 265 bin_SCRIPTS = cpfile
 266 all: all-recursive
 267
 268 .SUFFIXES:
 269 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 270         @for dep in $?; do \
 271           case '$(am__configure_deps)' in \
 272             *$$dep*) \
 273               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 274                 && { if test -f $@; then exit 0; else break; fi; }; \
 275               exit 1;; \
 276           esac; \
 277         done; \
 278         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/cpfile/Makefile'; \
 279         $(am__cd) $(top_srcdir) && \
 280           $(AUTOMAKE) --foreign examples/cpfile/Makefile
 281 .PRECIOUS: Makefile
 282 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 283         @case '$?' in \
 284           *config.status*) \
 285             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 286           *) \
 287             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 288             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 289         esac;
 290
 291 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 292         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 293
 294 $(top_srcdir)/configure:  $(am__configure_deps)
 295         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 296 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 297         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 298 $(am__aclocal_m4_deps):
 299 cpfile: $(top_builddir)/config.status $(srcdir)/cpfile.in
 300         cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
 301 install-binSCRIPTS: $(bin_SCRIPTS)
 302         @$(NORMAL_INSTALL)
 303         test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
 304         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
 305         for p in $$list; do \
 306           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 307           if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
 308         done | \
 309         sed -e 'p;s,.*/,,;n' \
 310             -e 'h;s|.*|.|' \
 311             -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
 312         $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
 313           { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
 314             if ($$2 == $$4) { files[d] = files[d] " " $$1; \
 315               if (++n[d] == $(am__install_max)) { \
 316                 print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
 317             else { print "f", d "/" $$4, $$1 } } \
 318           END { for (d in files) print "f", d, files[d] }' | \
 319         while read type dir files; do \
 320              if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
 321              test -z "$$files" || { \
 322                echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
 323                $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
 324              } \
 325         ; done
 326
 327 uninstall-binSCRIPTS:
 328         @$(NORMAL_UNINSTALL)
 329         @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
 330         files=`for p in $$list; do echo "$$p"; done | \
 331                sed -e 's,.*/,,;$(transform)'`; \
 332         dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
 333
 334 mostlyclean-libtool:
 335         -rm -f *.lo
 336
 337 clean-libtool:
 338         -rm -rf .libs _libs
 339
 340 # This directory's subdirectories are mostly independent; you can cd
 341 # into them and run `make' without going through this Makefile.
 342 # To change the values of `make' variables: instead of editing Makefiles,
 343 # (1) if the variable is set in `config.status', edit `config.status'
 344 #     (which will cause the Makefiles to be regenerated when you run `make');
 345 # (2) otherwise, pass the desired values on the `make' command line.
 346 $(RECURSIVE_TARGETS):
 347         @fail= failcom='exit 1'; \
 348         for f in x $$MAKEFLAGS; do \
 349           case $$f in \
 350             *=* | --[!k]*);; \
 351             *k*) failcom='fail=yes';; \
 352           esac; \
 353         done; \
 354         dot_seen=no; \
 355         target=`echo $@ | sed s/-recursive//`; \
 356         list='$(SUBDIRS)'; for subdir in $$list; do \
 357           echo "Making $$target in $$subdir"; \
 358           if test "$$subdir" = "."; then \
 359             dot_seen=yes; \
 360             local_target="$$target-am"; \
 361           else \
 362             local_target="$$target"; \
 363           fi; \
 364           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 365           || eval $$failcom; \
 366         done; \
 367         if test "$$dot_seen" = "no"; then \
 368           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 369         fi; test -z "$$fail"
 370
 371 $(RECURSIVE_CLEAN_TARGETS):
 372         @fail= failcom='exit 1'; \
 373         for f in x $$MAKEFLAGS; do \
 374           case $$f in \
 375             *=* | --[!k]*);; \
 376             *k*) failcom='fail=yes';; \
 377           esac; \
 378         done; \
 379         dot_seen=no; \
 380         case "$@" in \
 381           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 382           *) list='$(SUBDIRS)' ;; \
 383         esac; \
 384         rev=''; for subdir in $$list; do \
 385           if test "$$subdir" = "."; then :; else \
 386             rev="$$subdir $$rev"; \
 387           fi; \
 388         done; \
 389         rev="$$rev ."; \
 390         target=`echo $@ | sed s/-recursive//`; \
 391         for subdir in $$rev; do \
 392           echo "Making $$target in $$subdir"; \
 393           if test "$$subdir" = "."; then \
 394             local_target="$$target-am"; \
 395           else \
 396             local_target="$$target"; \
 397           fi; \
 398           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 399           || eval $$failcom; \
 400         done && test -z "$$fail"
 401 tags-recursive:
 402         list='$(SUBDIRS)'; for subdir in $$list; do \
 403           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 404         done
 405 ctags-recursive:
 406         list='$(SUBDIRS)'; for subdir in $$list; do \
 407           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 408         done
 409
 410 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 411         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 412         unique=`for i in $$list; do \
 413             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 414           done | \
 415           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 416               END { if (nonempty) { for (i in files) print i; }; }'`; \
 417         mkid -fID $$unique
 418 tags: TAGS
 419
 420 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 421                 $(TAGS_FILES) $(LISP)
 422         set x; \
 423         here=`pwd`; \
 424         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 425           include_option=--etags-include; \
 426           empty_fix=.; \
 427         else \
 428           include_option=--include; \
 429           empty_fix=; \
 430         fi; \
 431         list='$(SUBDIRS)'; for subdir in $$list; do \
 432           if test "$$subdir" = .; then :; else \
 433             test ! -f $$subdir/TAGS || \
 434               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 435           fi; \
 436         done; \
 437         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 438         unique=`for i in $$list; do \
 439             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 440           done | \
 441           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 442               END { if (nonempty) { for (i in files) print i; }; }'`; \
 443         shift; \
 444         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 445           test -n "$$unique" || unique=$$empty_fix; \
 446           if test $$# -gt 0; then \
 447             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 448               "$$@" $$unique; \
 449           else \
 450             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 451               $$unique; \
 452           fi; \
 453         fi
 454 ctags: CTAGS
 455 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 456                 $(TAGS_FILES) $(LISP)
 457         list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 458         unique=`for i in $$list; do \
 459             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 460           done | \
 461           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 462               END { if (nonempty) { for (i in files) print i; }; }'`; \
 463         test -z "$(CTAGS_ARGS)$$unique" \
 464           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 465              $$unique
 466
 467 GTAGS:
 468         here=`$(am__cd) $(top_builddir) && pwd` \
 469           && $(am__cd) $(top_srcdir) \
 470           && gtags -i $(GTAGS_ARGS) "$$here"
 471
 472 distclean-tags:
 473         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 474
 475 distdir: $(DISTFILES)
 476         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 477         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 478         list='$(DISTFILES)'; \
 479           dist_files=`for file in $$list; do echo $$file; done | \
 480           sed -e "s|^$$srcdirstrip/||;t" \
 481               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 482         case $$dist_files in \
 483           */*) $(MKDIR_P) `echo "$$dist_files" | \
 484                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 485                            sort -u` ;; \
 486         esac; \
 487         for file in $$dist_files; do \
 488           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 489           if test -d $$d/$$file; then \
 490             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 491             if test -d "$(distdir)/$$file"; then \
 492               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 493             fi; \
 494             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 495               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 496               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 497             fi; \
 498             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 499           else \
 500             test -f "$(distdir)/$$file" \
 501             || cp -p $$d/$$file "$(distdir)/$$file" \
 502             || exit 1; \
 503           fi; \
 504         done
 505         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 506           if test "$$subdir" = .; then :; else \
 507             test -d "$(distdir)/$$subdir" \
 508             || $(MKDIR_P) "$(distdir)/$$subdir" \
 509             || exit 1; \
 510           fi; \
 511         done
 512         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 513           if test "$$subdir" = .; then :; else \
 514             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 515             $(am__relativize); \
 516             new_distdir=$$reldir; \
 517             dir1=$$subdir; dir2="$(top_distdir)"; \
 518             $(am__relativize); \
 519             new_top_distdir=$$reldir; \
 520             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 521             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 522             ($(am__cd) $$subdir && \
 523               $(MAKE) $(AM_MAKEFLAGS) \
 524                 top_distdir="$$new_top_distdir" \
 525                 distdir="$$new_distdir" \
 526                 am__remove_distdir=: \
 527                 am__skip_length_check=: \
 528                 am__skip_mode_fix=: \
 529                 distdir) \
 530               || exit 1; \
 531           fi; \
 532         done
 533 check-am: all-am
 534 check: check-recursive
 535 all-am: Makefile $(SCRIPTS)
 536 installdirs: installdirs-recursive
 537 installdirs-am:
 538         for dir in "$(DESTDIR)$(bindir)"; do \
 539           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 540         done
 541 install: install-recursive
 542 install-exec: install-exec-recursive
 543 install-data: install-data-recursive
 544 uninstall: uninstall-recursive
 545
 546 install-am: all-am
 547         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 548
 549 installcheck: installcheck-recursive
 550 install-strip:
 551         if test -z '$(STRIP)'; then \
 552           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 553             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 554               install; \
 555         else \
 556           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 557             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 558             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 559         fi
 560 mostlyclean-generic:
 561
 562 clean-generic:
 563
 564 distclean-generic:
 565         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 566         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 567
 568 maintainer-clean-generic:
 569         @echo "This command is intended for maintainers to use"
 570         @echo "it deletes files that may require special tools to rebuild."
 571 clean: clean-recursive
 572
 573 clean-am: clean-generic clean-libtool mostlyclean-am
 574
 575 distclean: distclean-recursive
 576         -rm -f Makefile
 577 distclean-am: clean-am distclean-generic distclean-tags
 578
 579 dvi: dvi-recursive
 580
 581 dvi-am:
 582
 583 html: html-recursive
 584
 585 html-am:
 586
 587 info: info-recursive
 588
 589 info-am:
 590
 591 install-data-am:
 592
 593 install-dvi: install-dvi-recursive
 594
 595 install-dvi-am:
 596
 597 install-exec-am: install-binSCRIPTS
 598
 599 install-html: install-html-recursive
 600
 601 install-html-am:
 602
 603 install-info: install-info-recursive
 604
 605 install-info-am:
 606
 607 install-man:
 608
 609 install-pdf: install-pdf-recursive
 610
 611 install-pdf-am:
 612
 613 install-ps: install-ps-recursive
 614
 615 install-ps-am:
 616
 617 installcheck-am:
 618
 619 maintainer-clean: maintainer-clean-recursive
 620         -rm -f Makefile
 621 maintainer-clean-am: distclean-am maintainer-clean-generic
 622
 623 mostlyclean: mostlyclean-recursive
 624
 625 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 626
 627 pdf: pdf-recursive
 628
 629 pdf-am:
 630
 631 ps: ps-recursive
 632
 633 ps-am:
 634
 635 uninstall-am: uninstall-binSCRIPTS
 636
 637 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
 638         install-am install-strip tags-recursive
 639
 640 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 641         all all-am check check-am clean clean-generic clean-libtool \
 642         ctags ctags-recursive distclean distclean-generic \
 643         distclean-libtool distclean-tags distdir dvi dvi-am html \
 644         html-am info info-am install install-am install-binSCRIPTS \
 645         install-data install-data-am install-dvi install-dvi-am \
 646         install-exec install-exec-am install-html install-html-am \
 647         install-info install-info-am install-man install-pdf \
 648         install-pdf-am install-ps install-ps-am install-strip \
 649         installcheck installcheck-am installdirs installdirs-am \
 650         maintainer-clean maintainer-clean-generic mostlyclean \
 651         mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 652         tags tags-recursive uninstall uninstall-am \
 653         uninstall-binSCRIPTS
 654
 655
 656 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 657 # Otherwise a system limit (for SysV at least) may be exceeded.
 658 .NOEXPORT: