scripts/tizen/sd_fusing_rpi4.sh

   1 #!/bin/bash
   2
   3 declare FORMAT=""
   4 declare DEVICE=""
   5 declare -i OLD_DD=0
   6
   7 # Binaires array for fusing
   8 declare -a FUSING_BINARY_ARRAY
   9 declare -i FUSING_BINARY_NUM=0
  10
  11 declare CONV_ASCII=""
  12 declare -i FUS_ENTRY_NUM=0
  13 declare -i ab_option=0
  14
  15 # binary name | part number | bs | label | fs type
  16 declare -a PART_TABLE=(
  17         "boot.img"                      1       4M      boot_a                  vfat
  18         "rootfs.img"                    2       4M      rootfs_a                ext4
  19         "system-data.img"               3       4M      system-data             ext4
  20         "user.img"                      5       4M      user                    ext4
  21         "modules.img"                   6       4M      module_a                ext4
  22         "ramdisk.img"                   7       4M      ramdisk_a               ext4
  23         "ramdisk-recovery.img"          8       4M      ramdisk-recovery_a      ext4
  24         "hal.img"                       10      4M      hal_a                   ext4
  25         "boot.img"                      11      4M      boot_b                  vfat
  26         "rootfs.img"                    12      4M      rootfs_b                ext4
  27         "modules.img"                   13      4M      module_b                ext4
  28         "ramdisk.img"                   14      4M      ramdisk_b               ext4
  29         "ramdisk-recovery.img"          15      4M      ramdisk-recovery_b      ext4
  30         "hal.img"                       16      4M      hal_b                   ext4
  31         )
  32 declare -a PART_TABLE_B=(
  33         "boot.img"                      11      4M      boot_b                  vfat
  34         "rootfs.img"                    12      4M      rootfs_b                ext4
  35         "modules.img"                   13      4M      module_b                ext4
  36         "ramdisk.img"                   14      4M      ramdisk_b               ext4
  37         "ramdisk-recovery.img"          15      4M      ramdisk-recovery_b      ext4
  38         "hal.img"                       16      4M      hal_b                   ext4
  39         )
  40
  41 declare -r -i PART_TABLE_COL=5
  42 declare -r -i PART_TABLE_ROW=${#PART_TABLE[*]}/${PART_TABLE_COL}
  43 declare -r -i PART_TABLE_ROW_B=${#PART_TABLE_B[*]}/${PART_TABLE_COL}
  44
  45 # partition table support
  46 function get_index_use_name () {
  47         local -r binary_name=$1
  48
  49         for ((idx=0;idx<$PART_TABLE_ROW;idx++)); do
  50                 if [ ${PART_TABLE[idx * ${PART_TABLE_COL} + 0]} == "$binary_name" ]; then
  51                         return $idx
  52                 fi
  53         done
  54
  55         # return out of bound index
  56         return $idx
  57 }
  58
  59 # partition table support
  60 function get_index_use_name_to_b () {
  61         local -r binary_name=$1
  62
  63         for ((idx=0;idx<$PART_TABLE_ROW_B;idx++)); do
  64                 if [ ${PART_TABLE_B[idx * ${PART_TABLE_COL} + 0]} == "$binary_name" ]; then
  65                         return $idx
  66                 fi
  67         done
  68
  69         # return out of bound index
  70         return $idx
  71 }
  72
  73 function print_message () {
  74         local color=$1
  75         local message=$2
  76
  77         tput setaf $color
  78         tput bold
  79         echo ""
  80         echo $message
  81         tput sgr 0
  82 }
  83
  84 function check_ddversion () {
  85         # NOTE
  86         # before coreutils dd 8.24, dd doesn't support "status=progress"
  87         # and the option causes fusing failure. For backward compatibility,
  88         # do not use the option for old dd
  89         local version=(`dd --version | head -1 | grep -o '[0-9]\+'`)
  90         local major=${version[0]}
  91         local minor=${version[1]}
  92
  93         if [ $major -lt 8 ];  then
  94                 OLD_DD=1
  95         elif [ $major -eq 8 -a $minor -lt 24 ];  then
  96                 OLD_DD=1
  97         fi
  98 }
  99
 100 function fusing_image () {
 101         if [ $ab_option == 2 ] ; then
 102                 echo "Skip to update Partitoin A"
 103                 return
 104         fi
 105         local -r fusing_img=$1
 106
 107         # get binary info using basename
 108         get_index_use_name $(basename "$fusing_img")
 109         local -r -i part_idx=$?
 110
 111         if [ $part_idx -ne $PART_TABLE_ROW ];then
 112                 local -r num=${PART_TABLE[${part_idx} * ${PART_TABLE_COL} + 1]}
 113                 if [ "${num}" == "" ]; then
 114                         local -r blktype=disk
 115                 else
 116                         local -r blktype=part
 117                 fi
 118                 local -r device=/dev/`lsblk ${DEVICE} -o TYPE,KNAME | awk "/^${blktype}.*[a-z]${num}\$/ { print \\\$2 }"`
 119                 local -r bs=${PART_TABLE[${part_idx} * ${PART_TABLE_COL} + 2]}
 120         else
 121                 echo "Not supported binary: $fusing_img"
 122                 return
 123         fi
 124
 125         local -r input_size=`du -b $fusing_img | awk '{print $1}'`
 126         local -r input_size_mb=`expr $input_size / 1024 / 1024`
 127
 128         print_message 2 "[Fusing $1 ($input_size_mb MiB)]"
 129         if [ "$blktype" == "part" ]; then
 130                 local MOUNT_PART=`mount | grep $device`
 131                 if [ "$MOUNT_PART" != "" ]; then
 132                         umount $device
 133                 fi
 134         fi
 135         if [ $OLD_DD == 1 ]; then
 136                 dd if=$fusing_img | pv -s $input_size | dd of=$device bs=$bs
 137         else
 138                 dd if=$fusing_img of=$device bs=$bs status=progress oflag=direct
 139         fi
 140 }
 141
 142 function fusing_image_to_b () {
 143         if [ $ab_option == 0 ]  ; then
 144                 echo "Skip to update Partitoin B"
 145                 return
 146         fi
 147         local -r fusing_img=$1
 148
 149         # get binary info using basename
 150         get_index_use_name_to_b $(basename "$fusing_img")
 151
 152         local -r -i part_idx=$?
 153
 154         if [ $part_idx -ne $PART_TABLE_ROW_B ];then
 155                 local -r num=${PART_TABLE_B[${part_idx} * ${PART_TABLE_COL} + 1]}
 156                 if [ "${num}" == "" ]; then
 157                         local -r blktype=disk
 158                 else
 159                         local -r blktype=part
 160                 fi
 161                 local -r device=/dev/`lsblk ${DEVICE} -o TYPE,KNAME | awk "/^${blktype}.*[a-z]${num}\$/ { print \\\$2 }"`
 162                 local -r bs=${PART_TABLE_B[${part_idx} * ${PART_TABLE_COL} + 2]}
 163         else
 164                 echo "Not supported binary: $fusing_img"
 165                 return
 166         fi
 167
 168         local -r input_size=`du -b $fusing_img | awk '{print $1}'`
 169         local -r input_size_mb=`expr $input_size / 1024 / 1024`
 170
 171         print_message 2 "[Fusing $1 ($input_size_mb MiB)]"
 172         if [ "$blktype" == "part" ]; then
 173                 local MOUNT_PART=`mount | grep $device`
 174                 if [ "$MOUNT_PART" != "" ]; then
 175                         umount $device
 176                 fi
 177         fi
 178         if [ $OLD_DD == 1 ]; then
 179                 dd if=$fusing_img | pv -s $input_size | dd of=$device bs=$bs
 180         else
 181                 dd if=$fusing_img of=$device bs=$bs status=progress oflag=direct
 182         fi
 183 }
 184
 185 function fuse_image_tarball () {
 186         local -r filepath=$1
 187         local -r temp_dir="tar_tmp"
 188
 189         mkdir -p $temp_dir
 190         tar xvf $filepath -C $temp_dir
 191         cd $temp_dir
 192
 193         for file in *
 194         do
 195                 fusing_image $file
 196                 fusing_image_to_b $file
 197         done
 198
 199         cd ..
 200         rm -rf $temp_dir
 201         eval sync
 202 }
 203
 204 function fuse_image () {
 205
 206         if [ "$FUSING_BINARY_NUM" == 0 ]; then
 207                 return
 208         fi
 209
 210         for ((fuse_idx = 0 ; fuse_idx < $FUSING_BINARY_NUM ; fuse_idx++))
 211         do
 212                 local filename=${FUSING_BINARY_ARRAY[fuse_idx]}
 213
 214                 case "$filename" in
 215                     *.tar | *.tar.gz)
 216                         fuse_image_tarball $filename
 217                         ;;
 218                     *)
 219                         fusing_image $filename
 220                         fusing_image_to_b $filename
 221                         ;;
 222                 esac
 223         done
 224         echo ""
 225 }
 226
 227 # partition format
 228 function mkpart_3 () {
 229         # NOTE: if your sfdisk version is less than 2.26.0, then you should use following sfdisk command:
 230         # sfdisk --in-order --Linux --unit M $DISK <<-__EOF__
 231
 232         # NOTE: sfdisk 2.26 doesn't support units other than sectors and marks --unit option as deprecated.
 233         # The input data needs to contain multipliers (MiB) instead.
 234         local version=(`sfdisk -v | grep -o '[0-9]\+'`)
 235         local major=${version[0]}
 236         local minor=${version[1]}
 237         local sfdisk_new=0
 238         local support_delete=0
 239
 240         if [ $major -gt 2 ];  then
 241                 sfdisk_new=1
 242                 if [ $major -eq 2 -a $minor -ge 28 ]; then
 243                         support_delete=1
 244                 fi
 245         else
 246                 if [ $major -eq 2 -a $minor -ge 26 ];  then
 247                         sfdisk_new=1
 248                 fi
 249         fi
 250
 251         if [ $sfdisk_new == 0 ]; then
 252                 echo "$(tput setaf 3)$(tput bold)NOTICE: Your sfdisk ${version[0]}.${version[1]}  version is too old. Update Latest sfdisk!"
 253                 tput sgr 0
 254                 exit -1
 255         fi
 256
 257         local -r DISK=$DEVICE
 258         local -r SIZE=`sfdisk -s $DISK`
 259         local -r SIZE_MB=$((SIZE >> 10))
 260
 261         local -r BOOT_SZ=64
 262         local -r ROOTFS_SZ=3072
 263         local -r DATA_SZ=1344
 264         local -r MODULE_SZ=32
 265         local -r RAMDISK_SZ=32
 266         local -r RAMDISK_RECOVERY_SZ=32
 267         local -r INFORM_SZ=8
 268         local -r HAL_SZ=256
 269         local -r PARAM_SZ=4
 270         local -r RESERVED1_SZ=64
 271         local -r RESERVED2_SZ=125
 272         local -r EXTEND_SZ=36
 273
 274         let "USER_SZ = $SIZE_MB - $BOOT_SZ * 2 - $ROOTFS_SZ * 2 - $DATA_SZ - $MODULE_SZ * 2 - $RAMDISK_SZ * 2 - $RAMDISK_RECOVERY_SZ * 2 - $INFORM_SZ - $EXTEND_SZ - $HAL_SZ * 2 - $RESERVED1_SZ - $RESERVED2_SZ - $PARAM_SZ"
 275
 276         local -r BOOT_A=${PART_TABLE[0 * ${PART_TABLE_COL} + 3]}
 277         local -r ROOTFS_A=${PART_TABLE[1 * ${PART_TABLE_COL} + 3]}
 278         local -r SYSTEMDATA=${PART_TABLE[2 * ${PART_TABLE_COL} + 3]}
 279         local -r USER=${PART_TABLE[3 * ${PART_TABLE_COL} + 3]}
 280         local -r MODULE_A=${PART_TABLE[4 * ${PART_TABLE_COL} + 3]}
 281         local -r RAMDISK_A=${PART_TABLE[5 * ${PART_TABLE_COL} + 3]}
 282         local -r RAMDISK_RECOVERY_A=${PART_TABLE[6 * ${PART_TABLE_COL} + 3]}
 283         local -r INFORM=inform
 284         local -r HAL_A=${PART_TABLE[7 * ${PART_TABLE_COL} + 3]}
 285         local -r BOOT_B=${PART_TABLE[8 * ${PART_TABLE_COL} + 3]}
 286         local -r ROOTFS_B=${PART_TABLE[9 * ${PART_TABLE_COL} + 3]}
 287         local -r MODULE_B=${PART_TABLE[10 * ${PART_TABLE_COL} + 3]}
 288         local -r RAMDISK_B=${PART_TABLE[11 * ${PART_TABLE_COL} + 3]}
 289         local -r RAMDISK_RECOVERY_B=${PART_TABLE[12 * ${PART_TABLE_COL} + 3]}
 290         local -r HAL_B=${PART_TABLE[13 * ${PART_TABLE_COL} + 3]}
 291         local -r RESERVED0=reserved0
 292         local -r RESERVED1=reserved1
 293         local -r RESERVED2=reserved2
 294
 295         if [[ $USER_SZ -le 100 ]]
 296         then
 297                 echo "We recommend to use more than 8GB disk"
 298                 exit 0
 299         fi
 300
 301         echo "================================================"
 302         echo "Label                     dev             size"
 303         echo "================================================"
 304         echo $BOOT_A"                   " $DISK"1       " $BOOT_SZ "MB"
 305         echo $ROOTFS_A"                 " $DISK"2       " $ROOTFS_SZ "MB"
 306         echo $SYSTEMDATA"               " $DISK"3       " $DATA_SZ "MB"
 307         echo "[Extend]""                " $DISK"4"
 308         echo " "$USER"                  " $DISK"5       " $USER_SZ "MB"
 309         echo " "$MODULE_A"              " $DISK"6       " $MODULE_SZ "MB"
 310         echo " "$RAMDISK_A"             " $DISK"7       " $RAMDISK_SZ "MB"
 311         echo " "$RAMDISK_RECOVERY_A"    " $DISK"8       " $RAMDISK_RECOVERY_SZ "MB"
 312         echo " "$INFORM"                " $DISK"9       " $INFORM_SZ "MB"
 313         echo " "$HAL_A"                 " $DISK"10      " $HAL_SZ "MB"
 314         echo " "$BOOT_B"                " $DISK"11      " $BOOT_SZ "MB"
 315         echo " "$ROOTFS_B"              " $DISK"12      " $ROOTFS_SZ "MB"
 316         echo " "$MODULE_B"              " $DISK"13      " $MODULE_SZ "MB"
 317         echo " "$RAMDISK_B"             " $DISK"14      " $RAMDISK_SZ "MB"
 318         echo " "$RAMDISK_RECOVERY_B"    " $DISK"15      " $RAMDISK_RECOVERY_SZ "MB"
 319         echo " "$HAL_B"                 " $DISK"16      " $HAL_SZ "MB"
 320         echo " "$RESERVED0"             " $DISK"17      " $PARAM_SZ "MB"
 321         echo " "$RESERVED1"             " $DISK"18      " $RESERVED1_SZ "MB"
 322         echo " "$RESERVED2"             " $DISK"19      " $RESERVED2_SZ "MB"
 323
 324         local MOUNT_LIST=`mount | grep $DISK | awk '{print $1}'`
 325         for mnt in $MOUNT_LIST
 326         do
 327                 umount $mnt
 328         done
 329
 330         echo "Remove partition table..."
 331         dd if=/dev/zero of=$DISK bs=512 count=32 conv=notrunc
 332
 333         if [ $support_delete == 1 ]; then
 334                 sfdisk --delete $DISK
 335         fi
 336
 337         SCRIPT=""
 338         for ((idx=0; idx < $PART_TABLE_ROW; idx++)); do
 339                 NR=${PART_TABLE[idx * ${PART_TABLE_COL} + 1]}
 340                 eval "PART_LABEL_NR_${NR}=${PART_TABLE[idx * ${PART_TABLE_COL} + 3]}"
 341         done
 342
 343         sfdisk $DISK <<-__EOF__
 344         label: gpt
 345         ${DEVICE}1 : start=4MiB, size=${BOOT_SZ}MiB, type= C12A7328-F81F-11D2-BA4B-00A0C93EC93B, name=${PART_LABEL_NR_1}
 346         ${DEVICE}2 : size=${ROOTFS_SZ}MiB, name=${PART_LABEL_NR_2}
 347         ${DEVICE}3 : size=${DATA_SZ}MiB, name=${PART_LABEL_NR_3}
 348         ${DEVICE}4 : size=${EXTEND_SZ}MiB, name=none
 349         ${DEVICE}5 : size=${USER_SZ}MiB, name=${PART_LABEL_NR_5}
 350         ${DEVICE}6 : size=${MODULE_SZ}MiB, name=${PART_LABEL_NR_6}
 351         ${DEVICE}7 : size=${RAMDISK_SZ}MiB, name=${PART_LABEL_NR_7}
 352         ${DEVICE}8 : size=${RAMDISK_RECOVERY_SZ}MiB, name=${PART_LABEL_NR_8}
 353         ${DEVICE}9 : size=${INFORM_SZ}MiB, name=inform
 354         ${DEVICE}10: size=${HAL_SZ}MiB, name=${PART_LABEL_NR_10}
 355         ${DEVICE}11: size=${BOOT_SZ}MiB, type= C12A7328-F81F-11D2-BA4B-00A0C93EC93B, name=${PART_LABEL_NR_11}
 356         ${DEVICE}12: size=${ROOTFS_SZ}MiB, name=${PART_LABEL_NR_12}
 357         ${DEVICE}13: size=${MODULE_SZ}MiB, name=${PART_LABEL_NR_13}
 358         ${DEVICE}14: size=${RAMDISK_SZ}MiB, name=${PART_LABEL_NR_14}
 359         ${DEVICE}15: size=${RAMDISK_RECOVERY_SZ}MiB, name=${PART_LABEL_NR_15}
 360         ${DEVICE}16: size=${HAL_SZ}MiB, name=${PART_LABEL_NR_16}
 361         ${DEVICE}17: size=${PARAM_SZ}MiB, name=reserved0
 362         ${DEVICE}18: size=${RESERVED1_SZ}MiB, name=reserved1
 363         ${DEVICE}19: size=${RESERVED2_SZ}MiB, name=reserved2
 364         __EOF__
 365
 366
 367         for ((idx=0;idx<$PART_TABLE_ROW;idx++)); do
 368                 local PART=/dev/`lsblk ${DISK} -o TYPE,KNAME | awk "/^part.*[a-z]${PART_TABLE[$idx * ${PART_TABLE_COL} + 1]}\$/ { print \\\$2 }"`
 369                 if [ "${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]}" == "vfat" ]; then
 370                         mkfs.vfat -F 16 ${PART} -n ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]}
 371                         if [ $? -eq 1 ]; then
 372                                 echo "Failed to format as FAT filesystem"
 373                                 exit -1
 374                         fi
 375                 elif [ "${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]}" == "ext4" ]; then
 376                         mkfs.ext4 -q ${PART} -L ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]} -F
 377                 else
 378                         echo "Skip to format for unknown filesystem type ${PART_TABLE[$idx * ${PART_TABLE_COL} + 4]} for part$idx, ${PART_TABLE[$idx * ${PART_TABLE_COL} + 3]}"
 379                 fi
 380         done
 381
 382         local -r PART9=/dev/`lsblk ${DISK} -o TYPE,KNAME | grep part | awk '{ print $2 }' | grep -G "[a-z]9\$"`
 383         mkfs.ext4 -q ${PART9} -L $INFORM -F -O ^metadata_csum
 384
 385         # create "reboot-param.bin" file in inform partition for passing reboot parameter
 386         # It should be done only once upon partition format.
 387         if [ -d mnt_tmp ]; then
 388                 echo "Remove the existing mnt_tmp directory!!"
 389                 rm -rf mnt_tmp
 390         fi
 391         mkdir mnt_tmp
 392         mount -t ext4 ${PART9} ./mnt_tmp
 393         echo "norm" > ./mnt_tmp/reboot-param.bin
 394         echo "norm" > ./mnt_tmp/reboot-param.info
 395         echo "a" > ./mnt_tmp/partition-ab.info
 396         echo "0" > ./mnt_tmp/partition-ab-cloned.info
 397         echo "0" > ./mnt_tmp/upgrade-status.info
 398
 399         sync
 400         umount ./mnt_tmp
 401         rmdir mnt_tmp
 402
 403         local -r PART17=/dev/`lsblk ${DISK} -o TYPE,KNAME | grep part | awk '{ print $2 }' | grep -G "[a-z]17\$"`
 404         mkfs.ext4 -q ${PART17} -L $RESERVED0 -F
 405
 406         local -r PART18=/dev/`lsblk ${DISK} -o TYPE,KNAME | grep part | awk '{ print $2 }' | grep -G "[a-z]18\$"`
 407         mkfs.ext4 -q ${PART18} -L $RESERVED1 -F
 408
 409         local -r PART19=/dev/`lsblk ${DISK} -o TYPE,KNAME | grep part | awk '{ print $2 }' | grep -G "[a-z]19\$"`
 410         mkfs.ext4 -q ${PART19} -L $RESERVED2 -F
 411 }
 412
 413 function show_usage () {
 414         echo "- Usage:"
 415         echo "  sudo ./sd_fusing*.sh -d <device> [-b <path> <path> ..] [--format] [--update [b] ]"
 416         echo "  -d  : device ndoe "
 417         echo "  -b  : binary "
 418         echo "  --update : If want to update Image about B Partition, use --update option with b"
 419         echo "             Otherwise, it will be updated to both partition"
 420 }
 421
 422 function check_partition_format () {
 423         if [ "$FORMAT" != "2" ]; then
 424                 echo "-----------------------"
 425                 echo "Skip $DEVICE format"
 426                 echo "-----------------------"
 427                 return 0
 428         fi
 429
 430         echo "-------------------------------"
 431         echo "Start $DEVICE format"
 432         echo ""
 433         mkpart_3
 434         echo "End $DEVICE format"
 435         echo "-------------------------------"
 436         echo ""
 437 }
 438
 439 function check_args () {
 440         if [ "$DEVICE" == "" ]; then
 441                 echo -n "$(tput setaf 3)$(tput bold)$DEVICE will be formatted, Is it OK? [y/<n>] "
 442                 show_usage
 443                 tput sgr 0
 444                 exit 0
 445         fi
 446
 447         if [ "$DEVICE" != "" ]; then
 448                 echo "Device: $DEVICE"
 449         fi
 450
 451         if [ "$FUSING_BINARY_NUM" != 0 ]; then
 452                 echo "Fusing binary: "
 453                 for ((bid = 0 ; bid < $FUSING_BINARY_NUM ; bid++))
 454                 do
 455                         echo "  ${FUSING_BINARY_ARRAY[bid]}"
 456                 done
 457                 echo ""
 458         fi
 459
 460         if [ "$FORMAT" == "1" ]; then
 461                 echo ""
 462                 echo "$(tput setaf 3)$(tput bold)$DEVICE will be formatted, Is it OK? [y/<n>]"
 463                 tput sgr 0
 464                 read input
 465                 if [ "$input" == "y" ] || [ "$input" == "Y" ]; then
 466                         FORMAT=2
 467                 else
 468                         FORMAT=0
 469                 fi
 470         fi
 471 }
 472
 473 function check_device () {
 474         if [ ! -b "$DEVICE" ]; then
 475                 echo "No such device: $DEVICE"
 476                 exit 0
 477         fi
 478
 479         local REMOVABLE=`lsblk $DEVICE -nd -o RM | grep 1 | wc -l`
 480         if [ "$REMOVABLE" == "0" ]; then
 481                 echo ""
 482                 echo "$(tput setaf 3)$(tput bold)$DEVICE is not a removable disk, Is it OK? [y/<n>]"
 483                 tput sgr 0
 484                 read input
 485                 if [ "$input" != "y" ] && [ "$input" != "Y" ]; then
 486                         exit 0
 487                 fi
 488         fi
 489
 490         if [ ! -w "$DEVICE" ]; then
 491                 echo "Write not permitted: $DEVICE"
 492                 exit 0
 493         fi
 494 }
 495
 496 function print_logo () {
 497         echo ""
 498         echo "Raspberry Pi4 downloader, version 1.0.6"
 499         echo ""
 500 }
 501
 502 print_logo
 503
 504 function add_fusing_binary() {
 505         local declare binary_name=$1
 506
 507         if [ "$binary_name" != "" ]; then
 508                 if [ -f "$binary_name" ]; then
 509                         FUSING_BINARY_ARRAY[$FUSING_BINARY_NUM]=$binary_name
 510
 511                         FUSING_BINARY_NUM=$((FUSING_BINARY_NUM + 1))
 512                 else
 513                         echo "No such file: $binary_name"
 514                 fi
 515         fi
 516 }
 517
 518
 519 declare -i binary_option=0
 520
 521 while test $# -ne 0; do
 522         option=$1
 523         shift
 524
 525         case $option in
 526         --f | --format)
 527                 FORMAT="1"
 528                 binary_option=0
 529                 ;;
 530         -d)
 531                 DEVICE=$1
 532                 binary_option=0
 533                 shift
 534                 ;;
 535         -b)
 536                 add_fusing_binary $1
 537                 binary_option=1
 538                 shift
 539                 ;;
 540         --update)
 541                 if [ "$1" == "b" ] ; then
 542                         ab_option=2
 543                 else
 544                         ab_option=1
 545                 fi
 546                 shift
 547                 ;;
 548         *)
 549                 if [ $binary_option == 1 ];then
 550                         add_fusing_binary $option
 551                 else
 552                         echo "Unkown command: $option"
 553                         exit
 554                 fi
 555                 ;;
 556         esac
 557 done
 558
 559 check_args
 560 check_device
 561 check_partition_format
 562 check_ddversion
 563 fuse_image