2 # SPDX-License-Identifier: GPL-2.0
3 # (c) 2014, Sasha Levin <sasha.levin@oracle.com>
8 echo " $0 -r <release> | <vmlinux> [<base path>|auto] [<modules path>]"
11 # Try to find a Rust demangler
12 if type llvm-cxxfilt >/dev/null 2>&1 ; then
14 elif type c++filt >/dev/null 2>&1 ; then
20 if [[ -z ${LLVM:-} ]]; then
21 UTIL_PREFIX=${CROSS_COMPILE:-}
24 if [[ ${LLVM} == */ ]]; then
25 UTIL_PREFIX=${LLVM}${UTIL_PREFIX}
26 elif [[ ${LLVM} == -* ]]; then
31 READELF=${UTIL_PREFIX}readelf${UTIL_SUFFIX}
32 ADDR2LINE=${UTIL_PREFIX}addr2line${UTIL_SUFFIX}
34 if [[ $1 == "-r" ]] ; then
40 for fn in {,/usr/lib/debug}/boot/vmlinux-$release{,.debug} /lib/modules/$release{,/build}/vmlinux ; do
41 if [ -e "$fn" ] ; then
47 if [[ $vmlinux == "" ]] ; then
48 echo "ERROR! vmlinux image for release $release is not found" >&2
59 # Can we use debuginfod-find?
60 if type debuginfod-find >/dev/null 2>&1 ; then
64 if [[ $vmlinux == "" && -z $debuginfod ]] ; then
65 echo "ERROR! vmlinux image must be specified" >&2
71 declare aarray_support=true
72 declare -A cache 2>/dev/null
73 if [[ $? != 0 ]]; then
80 if [[ -n $debuginfod ]] ; then
81 if [[ -n $modbuildid ]] ; then
82 debuginfod-find debuginfo $modbuildid && return
85 # Only using debuginfod so don't try to find vmlinux module path
86 if [[ $debuginfod == "only" ]] ; then
91 if [[ "$modpath" != "" ]] ; then
92 for fn in $(find "$modpath" -name "${module//_/[-_]}.ko*") ; do
93 if ${READELF} -WS "$fn" | grep -qwF .debug_line ; then
101 modpath=$(dirname "$vmlinux")
102 find_module && return
104 if [[ $release == "" ]] ; then
105 release=$(gdb -ex 'print init_uts_ns.name.release' -ex 'quit' -quiet -batch "$vmlinux" 2>/dev/null | sed -n 's/\$1 = "\(.*\)".*/\1/p')
108 for dn in {/usr/lib/debug,}/lib/modules/$release ; do
109 if [ -e "$dn" ] ; then
111 find_module && return
120 # The structure of symbol at this point is:
121 # ([name]+[offset]/[total length])
124 # do_basic_setup+0x9c/0xbf
126 if [[ $module == "" ]] ; then
127 local objfile=$vmlinux
128 elif [[ $aarray_support == true && "${modcache[$module]+isset}" == "isset" ]]; then
129 local objfile=${modcache[$module]}
131 local objfile=$(find_module)
132 if [[ $objfile == "" ]] ; then
133 echo "WARNING! Modules path isn't set, but is needed to parse this symbol" >&2
136 if [[ $aarray_support == true ]]; then
137 modcache[$module]=$objfile
141 # Remove the englobing parenthesis
147 if [[ $symbol == *:* ]] ; then
148 segment=${symbol%%:*}:
152 # Strip the symbol name so that we could look it up
153 local name=${symbol%+*}
155 # Use 'nm vmlinux' to figure out the base address of said symbol.
156 # It's actually faster to call it every time than to load it
158 if [[ $aarray_support == true && "${cache[$module,$name]+isset}" == "isset" ]]; then
159 local base_addr=${cache[$module,$name]}
161 local base_addr=$(nm "$objfile" 2>/dev/null | awk '$3 == "'$name'" && ($2 == "t" || $2 == "T") {print $1; exit}')
162 if [[ $base_addr == "" ]] ; then
166 if [[ $aarray_support == true ]]; then
167 cache[$module,$name]="$base_addr"
170 # Let's start doing the math to get the exact address into the
171 # symbol. First, strip out the symbol total length.
172 local expr=${symbol%/*}
174 # Now, replace the symbol name with the base address we found
176 expr=${expr/$name/0x$base_addr}
178 # Evaluate it to find the actual address
180 local address=$(printf "%x\n" "$expr")
182 # Pass it to addr2line to get filename and line number
183 # Could get more than one result
184 if [[ $aarray_support == true && "${cache[$module,$address]+isset}" == "isset" ]]; then
185 local code=${cache[$module,$address]}
187 local code=$(${ADDR2LINE} -i -e "$objfile" "$address" 2>/dev/null)
188 if [[ $aarray_support == true ]]; then
189 cache[$module,$address]=$code
193 # addr2line doesn't return a proper error code if it fails, so
194 # we detect it using the value it prints so that we could preserve
195 # the offset/size into the function and bail out
196 if [[ $code == "??:0" ]]; then
200 # Strip out the base of the path on each line
201 code=$(while read -r line; do echo "${line#$basepath/}"; done <<< "$code")
203 # In the case of inlines, move everything to same line
204 code=${code//$'\n'/' '}
206 # Demangle if the name looks like a Rust symbol and if
207 # we got a Rust demangler
208 if [[ $name =~ ^_R && $cppfilt != "" ]] ; then
209 name=$("$cppfilt" "$cppfilt_opts" "$name")
212 # Replace old address with pretty line numbers
213 symbol="$segment$name ($code)"
216 debuginfod_get_vmlinux() {
217 local vmlinux_buildid=${1##* }
219 if [[ $vmlinux != "" ]]; then
223 if [[ $vmlinux_buildid =~ ^[0-9a-f]+ ]]; then
224 vmlinux=$(debuginfod-find debuginfo $vmlinux_buildid)
225 if [[ $? -ne 0 ]] ; then
226 echo "ERROR! vmlinux image not found via debuginfod-find" >&2
232 echo "ERROR! Build ID for vmlinux not found. Try passing -r or specifying vmlinux" >&2
238 local scripts=`dirname "${BASH_SOURCE[0]}"`
240 echo "$1" | $scripts/decodecode
244 if [[ $basepath == "auto" && $vmlinux != "" ]] ; then
246 symbol="kernel_init+0x0/0x0"
248 basepath=${symbol#kernel_init (}
249 basepath=${basepath%/init/main.c:*)}
255 read -a words <<<"$1"
257 # Remove hex numbers. Do it ourselves until it happens in the
260 # We need to know the index of the last element before we
261 # remove elements because arrays are sparse
262 local last=$(( ${#words[@]} - 1 ))
264 for i in "${!words[@]}"; do
266 if [[ ${words[$i]} =~ \[\<([^]]+)\>\] ]]; then
270 # Format timestamps with tabs
271 if [[ ${words[$i]} == \[ && ${words[$i+1]} == *\] ]]; then
273 words[$i+1]=$(printf "[%13s\n" "${words[$i+1]}")
277 if [[ ${words[$last]} =~ ^[0-9a-f]+\] ]]; then
278 words[$last-1]="${words[$last-1]} ${words[$last]}"
280 last=$(( $last - 1 ))
283 if [[ ${words[$last]} =~ \[([^]]+)\] ]]; then
284 module=${words[$last]}
287 modbuildid=${module#* }
289 if [[ $modbuildid == $module ]]; then
292 symbol=${words[$last-1]}
295 # The symbol is the last element, process it
296 symbol=${words[$last]}
302 parse_symbol # modifies $symbol
304 # Add up the line number to the symbol
305 echo "${words[@]}" "$symbol $module"
309 # Let's see if we have an address in the line
310 if [[ $line =~ \[\<([^]]+)\>\] ]] ||
311 [[ $line =~ [^+\ ]+\+0x[0-9a-f]+/0x[0-9a-f]+ ]]; then
312 # Translate address to line numbers
315 elif [[ $line == *Code:* ]]; then
317 # Is it a version line?
318 elif [[ -n $debuginfod && $line =~ PID:\ [0-9]+\ Comm: ]]; then
319 debuginfod_get_vmlinux "$line"
321 # Nothing special in this line, show it as is