2 # (C) Copyright 2000-2011
3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6 # Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
9 # Texas Instruments Incorporated - http://www.ti.com/
10 # Aneesh V <aneesh@ti.com>
12 # SPDX-License-Identifier: GPL-2.0+
14 # Based on top-level Makefile.
19 # Create output directory if not already present
20 _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
22 include $(srctree)/scripts/Kbuild.include
24 UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
26 -include $(obj)/include/config/auto.conf
27 -include $(obj)/include/autoconf.mk
29 ifeq ($(CONFIG_TPL_BUILD),y)
30 export CONFIG_TPL_BUILD
36 include $(srctree)/config.mk
37 include $(srctree)/arch/$(ARCH)/Makefile
39 # Enable garbage collection of un-used sections for SPL
40 KBUILD_CFLAGS += -ffunction-sections -fdata-sections
41 LDFLAGS_FINAL += --gc-sections
44 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
47 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
49 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
50 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
52 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
53 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
54 libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
55 libs-$(CONFIG_SPL_DM) += drivers/core/
56 libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
57 libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
58 libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
59 libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
60 libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
61 libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
62 libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
64 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
65 libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
66 libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
67 libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
68 libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
69 libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
70 libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
71 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
72 libs-$(CONFIG_SPL_NET_SUPPORT) += net/
73 libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
74 libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
75 libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
76 libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
77 libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
78 libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
79 libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
80 libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
81 libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
83 head-y := $(addprefix $(obj)/,$(head-y))
84 libs-y := $(addprefix $(obj)/,$(libs-y))
85 u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
87 libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
90 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
91 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
92 PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
95 u-boot-spl-init := $(head-y)
96 u-boot-spl-main := $(libs-y)
99 ifdef CONFIG_SPL_LDSCRIPT
100 # need to strip off double quotes
101 LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
104 ifeq ($(wildcard $(LDSCRIPT)),)
105 LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
107 ifeq ($(wildcard $(LDSCRIPT)),)
108 LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
110 ifeq ($(wildcard $(LDSCRIPT)),)
111 LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
113 ifeq ($(wildcard $(LDSCRIPT)),)
114 $(error could not find linker script)
117 # Special flags for CPP when processing the linker script.
118 # Pass the version down so we can handle backwards compatibility
121 -include $(srctree)/include/u-boot/u-boot.lds.h \
122 -include $(objtree)/include/config.h \
124 $(shell $(LD) --version | \
125 sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
127 quiet_cmd_mkimage = MKIMAGE $@
128 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
129 $(if $(KBUILD_VERBOSE:1=), >/dev/null)
131 MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
133 MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
135 MLO MLO.byteswap: $(obj)/u-boot-spl.bin
136 $(call if_changed,mkimage)
138 MKIMAGEFLAGS_boot.bin = -T atmelimage
140 ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
141 MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
143 boot.bin: $(obj)/../tools/atmel_pmecc_params
146 boot.bin: $(obj)/u-boot-spl.bin
147 $(call if_changed,mkimage)
149 ALL-y += $(obj)/$(SPL_BIN).bin
152 ALL-y += $(obj)/$(BOARD)-spl.bin
156 ifndef CONFIG_SPL_FEL
157 ALL-y += $(obj)/sunxi-spl.bin
161 ifeq ($(CONFIG_SYS_SOC),"at91")
168 ifdef CONFIG_VAR_SIZE_SPL
169 VAR_SIZE_PARAM = --vs
173 $(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
174 $(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
175 $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
176 $(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
179 quiet_cmd_objcopy = OBJCOPY $@
180 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
182 OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
184 $(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
185 $(call if_changed,objcopy)
187 LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
188 ifneq ($(CONFIG_SPL_TEXT_BASE),)
189 LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
193 quiet_cmd_mksunxiboot = MKSUNXI $@
194 cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
195 $(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
196 $(call if_changed,mksunxiboot)
199 quiet_cmd_u-boot-spl = LD $@
200 cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
201 $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
202 $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
203 $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
205 $(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
206 $(call if_changed,u-boot-spl)
208 $(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
210 PHONY += $(u-boot-spl-dirs)
212 $(Q)$(MAKE) $(build)=$@
214 quiet_cmd_cpp_lds = LDS $@
215 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
216 -D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
218 $(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
219 $(call if_changed_dep,cpp_lds)
221 # read all saved command lines
223 targets := $(wildcard $(sort $(targets)))
224 cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
226 ifneq ($(cmd_files),)
227 $(cmd_files): ; # Do not try to update included dependency files
234 # Declare the contents of the .PHONY variable as phony. We keep that
235 # information in a variable so we can use it in if_changed and friends.