Merge tag 'mips_fixes_4.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips...
[platform/kernel/linux-rpi.git] / scripts / Makefile.build
1 # SPDX-License-Identifier: GPL-2.0
2 # ==========================================================================
3 # Building
4 # ==========================================================================
5
6 src := $(obj)
7
8 PHONY := __build
9 __build:
10
11 # Init all relevant variables used in kbuild files so
12 # 1) they have correct type
13 # 2) they do not inherit any value from the environment
14 obj-y :=
15 obj-m :=
16 lib-y :=
17 lib-m :=
18 always :=
19 targets :=
20 subdir-y :=
21 subdir-m :=
22 EXTRA_AFLAGS   :=
23 EXTRA_CFLAGS   :=
24 EXTRA_CPPFLAGS :=
25 EXTRA_LDFLAGS  :=
26 asflags-y  :=
27 ccflags-y  :=
28 cppflags-y :=
29 ldflags-y  :=
30
31 subdir-asflags-y :=
32 subdir-ccflags-y :=
33
34 # Read auto.conf if it exists, otherwise ignore
35 -include include/config/auto.conf
36
37 include scripts/Kbuild.include
38
39 # For backward compatibility check that these variables do not change
40 save-cflags := $(CFLAGS)
41
42 # The filename Kbuild has precedence over Makefile
43 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
44 kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
45 include $(kbuild-file)
46
47 # If the save-* variables changed error out
48 ifeq ($(KBUILD_NOPEDANTIC),)
49         ifneq ("$(save-cflags)","$(CFLAGS)")
50                 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use ccflags-y)
51         endif
52 endif
53
54 include scripts/Makefile.lib
55
56 ifdef host-progs
57 ifneq ($(hostprogs-y),$(host-progs))
58 $(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
59 hostprogs-y += $(host-progs)
60 endif
61 endif
62
63 # Do not include host rules unless needed
64 ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(hostcxxlibs-m),)
65 include scripts/Makefile.host
66 endif
67
68 ifndef obj
69 $(warning kbuild: Makefile.build is included improperly)
70 endif
71
72 # ===========================================================================
73
74 ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
75 lib-target := $(obj)/lib.a
76 real-obj-y += $(obj)/lib-ksyms.o
77 endif
78
79 ifneq ($(strip $(real-obj-y) $(need-builtin)),)
80 builtin-target := $(obj)/built-in.a
81 endif
82
83 modorder-target := $(obj)/modules.order
84
85 # We keep a list of all modules in $(MODVERDIR)
86
87 __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
88          $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
89          $(subdir-ym) $(always)
90         @:
91
92 # Linus' kernel sanity checking tool
93 ifneq ($(KBUILD_CHECKSRC),0)
94   ifeq ($(KBUILD_CHECKSRC),2)
95     quiet_cmd_force_checksrc = CHECK   $<
96           cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
97   else
98       quiet_cmd_checksrc     = CHECK   $<
99             cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
100   endif
101 endif
102
103 ifneq ($(KBUILD_ENABLE_EXTRA_GCC_CHECKS),)
104   cmd_checkdoc = $(srctree)/scripts/kernel-doc -none $< ;
105 endif
106
107 # Do section mismatch analysis for each module/built-in.a
108 ifdef CONFIG_DEBUG_SECTION_MISMATCH
109   cmd_secanalysis = ; scripts/mod/modpost $@
110 endif
111
112 # Compile C sources (.c)
113 # ---------------------------------------------------------------------------
114
115 # Default is built-in, unless we know otherwise
116 modkern_cflags =                                          \
117         $(if $(part-of-module),                           \
118                 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
119                 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
120 quiet_modtag := $(empty)   $(empty)
121
122 $(real-obj-m)        : part-of-module := y
123 $(real-obj-m:.o=.i)  : part-of-module := y
124 $(real-obj-m:.o=.s)  : part-of-module := y
125 $(real-obj-m:.o=.lst): part-of-module := y
126
127 $(real-obj-m)        : quiet_modtag := [M]
128 $(real-obj-m:.o=.i)  : quiet_modtag := [M]
129 $(real-obj-m:.o=.s)  : quiet_modtag := [M]
130 $(real-obj-m:.o=.lst): quiet_modtag := [M]
131
132 $(obj-m)             : quiet_modtag := [M]
133
134 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
135 cmd_cc_s_c       = $(CC) $(c_flags) $(DISABLE_LTO) -fverbose-asm -S -o $@ $<
136
137 $(obj)/%.s: $(src)/%.c FORCE
138         $(call if_changed_dep,cc_s_c)
139
140 quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@
141 cmd_cpp_i_c       = $(CPP) $(c_flags) -o $@ $<
142
143 $(obj)/%.i: $(src)/%.c FORCE
144         $(call if_changed_dep,cpp_i_c)
145
146 # These mirror gensymtypes_S and co below, keep them in synch.
147 cmd_gensymtypes_c =                                                         \
148     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
149     $(GENKSYMS) $(if $(1), -T $(2))                                         \
150      $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
151      $(if $(KBUILD_PRESERVE),-p)                                            \
152      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
153
154 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
155 cmd_cc_symtypes_c =                                                         \
156     set -e;                                                                 \
157     $(call cmd_gensymtypes_c,true,$@) >/dev/null;                           \
158     test -s $@ || rm -f $@
159
160 $(obj)/%.symtypes : $(src)/%.c FORCE
161         $(call cmd,cc_symtypes_c)
162
163 # LLVM assembly
164 # Generate .ll files from .c
165 quiet_cmd_cc_ll_c = CC $(quiet_modtag)  $@
166       cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -o $@ $<
167
168 $(obj)/%.ll: $(src)/%.c FORCE
169         $(call if_changed_dep,cc_ll_c)
170
171 # C (.c) files
172 # The C file is compiled and updated dependency information is generated.
173 # (See cmd_cc_o_c + relevant part of rule_cc_o_c)
174
175 quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
176
177 ifndef CONFIG_MODVERSIONS
178 cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
179
180 else
181 # When module versioning is enabled the following steps are executed:
182 # o compile a .tmp_<file>.o from <file>.c
183 # o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
184 #   not export symbols, we just rename .tmp_<file>.o to <file>.o and
185 #   are done.
186 # o otherwise, we calculate symbol versions using the good old
187 #   genksyms on the preprocessed source and postprocess them in a way
188 #   that they are usable as a linker script
189 # o generate <file>.o from .tmp_<file>.o using the linker to
190 #   replace the unresolved symbols __crc_exported_symbol with
191 #   the actual value of the checksum generated by genksyms
192
193 cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
194
195 cmd_modversions_c =                                                             \
196         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
197                 $(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))  \
198                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
199                                                                                 \
200                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
201                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
202                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
203         else                                                                    \
204                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
205         fi;
206 endif
207
208 ifdef CONFIG_FTRACE_MCOUNT_RECORD
209 # gcc 5 supports generating the mcount tables directly
210 ifneq ($(call cc-option,-mrecord-mcount,y),y)
211 KBUILD_CFLAGS += -mrecord-mcount
212 else
213 # else do it all manually
214 ifdef BUILD_C_RECORDMCOUNT
215 ifeq ("$(origin RECORDMCOUNT_WARN)", "command line")
216   RECORDMCOUNT_FLAGS = -w
217 endif
218 # Due to recursion, we must skip empty.o.
219 # The empty.o file is created in the make process in order to determine
220 # the target endianness and word size. It is made before all other C
221 # files, including recordmcount.
222 sub_cmd_record_mcount =                                 \
223         if [ $(@) != "scripts/mod/empty.o" ]; then      \
224                 $(objtree)/scripts/recordmcount $(RECORDMCOUNT_FLAGS) "$(@)";   \
225         fi;
226 recordmcount_source := $(srctree)/scripts/recordmcount.c \
227                     $(srctree)/scripts/recordmcount.h
228 else
229 sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
230         "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
231         "$(if $(CONFIG_64BIT),64,32)" \
232         "$(OBJDUMP)" "$(OBJCOPY)" "$(CC) $(KBUILD_CFLAGS)" \
233         "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
234         "$(if $(part-of-module),1,0)" "$(@)";
235 recordmcount_source := $(srctree)/scripts/recordmcount.pl
236 endif # BUILD_C_RECORDMCOUNT
237 cmd_record_mcount =                                             \
238         if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" =   \
239              "$(CC_FLAGS_FTRACE)" ]; then                       \
240                 $(sub_cmd_record_mcount)                        \
241         fi;
242 endif # -record-mcount
243 endif # CONFIG_FTRACE_MCOUNT_RECORD
244
245 ifdef CONFIG_STACK_VALIDATION
246 ifneq ($(SKIP_STACK_VALIDATION),1)
247
248 __objtool_obj := $(objtree)/tools/objtool/objtool
249
250 objtool_args = $(if $(CONFIG_UNWINDER_ORC),orc generate,check)
251
252 objtool_args += $(if $(part-of-module), --module,)
253
254 ifndef CONFIG_FRAME_POINTER
255 objtool_args += --no-fp
256 endif
257 ifdef CONFIG_GCOV_KERNEL
258 objtool_args += --no-unreachable
259 else
260 objtool_args += $(call cc-ifversion, -lt, 0405, --no-unreachable)
261 endif
262 ifdef CONFIG_RETPOLINE
263 ifneq ($(RETPOLINE_CFLAGS),)
264   objtool_args += --retpoline
265 endif
266 endif
267
268
269 ifdef CONFIG_MODVERSIONS
270 objtool_o = $(@D)/.tmp_$(@F)
271 else
272 objtool_o = $(@)
273 endif
274
275 # 'OBJECT_FILES_NON_STANDARD := y': skip objtool checking for a directory
276 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'y': skip objtool checking for a file
277 # 'OBJECT_FILES_NON_STANDARD_foo.o := 'n': override directory skip for a file
278 cmd_objtool = $(if $(patsubst y%,, \
279         $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
280         $(__objtool_obj) $(objtool_args) "$(objtool_o)";)
281 objtool_obj = $(if $(patsubst y%,, \
282         $(OBJECT_FILES_NON_STANDARD_$(basetarget).o)$(OBJECT_FILES_NON_STANDARD)n), \
283         $(__objtool_obj))
284
285 endif # SKIP_STACK_VALIDATION
286 endif # CONFIG_STACK_VALIDATION
287
288 # Rebuild all objects when objtool changes, or is enabled/disabled.
289 objtool_dep = $(objtool_obj)                                    \
290               $(wildcard include/config/orc/unwinder.h          \
291                          include/config/stack/validation.h)
292
293 define rule_cc_o_c
294         $(call echo-cmd,checksrc) $(cmd_checksrc)                         \
295         $(call cmd_and_fixdep,cc_o_c)                                     \
296         $(cmd_checkdoc)                                                   \
297         $(call echo-cmd,objtool) $(cmd_objtool)                           \
298         $(cmd_modversions_c)                                              \
299         $(call echo-cmd,record_mcount) $(cmd_record_mcount)
300 endef
301
302 define rule_as_o_S
303         $(call cmd_and_fixdep,as_o_S)                                     \
304         $(call echo-cmd,objtool) $(cmd_objtool)                           \
305         $(cmd_modversions_S)
306 endef
307
308 # List module undefined symbols (or empty line if not enabled)
309 ifdef CONFIG_TRIM_UNUSED_KSYMS
310 cmd_undef_syms = $(NM) $@ | sed -n 's/^  *U //p' | xargs echo
311 else
312 cmd_undef_syms = echo
313 endif
314
315 # Built-in and composite module parts
316 $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
317         $(call cmd,force_checksrc)
318         $(call if_changed_rule,cc_o_c)
319
320 # Single-part modules are special since we need to mark them in $(MODVERDIR)
321
322 $(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
323         $(call cmd,force_checksrc)
324         $(call if_changed_rule,cc_o_c)
325         @{ echo $(@:.o=.ko); echo $@; \
326            $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
327
328 quiet_cmd_cc_lst_c = MKLST   $@
329       cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
330                      $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
331                                      System.map $(OBJDUMP) > $@
332
333 $(obj)/%.lst: $(src)/%.c FORCE
334         $(call if_changed_dep,cc_lst_c)
335
336 # Compile assembler sources (.S)
337 # ---------------------------------------------------------------------------
338
339 modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
340
341 $(real-obj-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
342 $(real-obj-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
343
344 # .S file exports must have their C prototypes defined in asm/asm-prototypes.h
345 # or a file that it includes, in order to get versioned symbols. We build a
346 # dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from
347 # the .S file (with trailing ';'), and run genksyms on that, to extract vers.
348 #
349 # This is convoluted. The .S file must first be preprocessed to run guards and
350 # expand names, then the resulting exports must be constructed into plain
351 # EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed
352 # to make the genksyms input.
353 #
354 # These mirror gensymtypes_c and co above, keep them in synch.
355 cmd_gensymtypes_S =                                                         \
356     (echo "\#include <linux/kernel.h>" ;                                    \
357      echo "\#include <asm/asm-prototypes.h>" ;                              \
358     $(CPP) $(a_flags) $< |                                                  \
359      grep "\<___EXPORT_SYMBOL\>" |                                          \
360      sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \
361     $(CPP) -D__GENKSYMS__ $(c_flags) -xc - |                                \
362     $(GENKSYMS) $(if $(1), -T $(2))                                         \
363      $(patsubst y,-R,$(CONFIG_MODULE_REL_CRCS))                             \
364      $(if $(KBUILD_PRESERVE),-p)                                            \
365      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
366
367 quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@
368 cmd_cc_symtypes_S =                                                         \
369     set -e;                                                                 \
370     $(call cmd_gensymtypes_S,true,$@) >/dev/null;                           \
371     test -s $@ || rm -f $@
372
373 $(obj)/%.symtypes : $(src)/%.S FORCE
374         $(call cmd,cc_symtypes_S)
375
376
377 quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@
378 cmd_cpp_s_S       = $(CPP) $(a_flags) -o $@ $<
379
380 $(obj)/%.s: $(src)/%.S FORCE
381         $(call if_changed_dep,cpp_s_S)
382
383 quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
384
385 ifndef CONFIG_MODVERSIONS
386 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
387
388 else
389
390 ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h)
391
392 ifeq ($(ASM_PROTOTYPES),)
393 cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
394
395 else
396
397 # versioning matches the C process described above, with difference that
398 # we parse asm-prototypes.h C header to get function definitions.
399
400 cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $<
401
402 cmd_modversions_S =                                                             \
403         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
404                 $(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))  \
405                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
406                                                                                 \
407                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
408                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
409                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
410         else                                                                    \
411                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
412         fi;
413 endif
414 endif
415
416 $(obj)/%.o: $(src)/%.S $(objtool_dep) FORCE
417         $(call if_changed_rule,as_o_S)
418
419 targets += $(filter-out $(subdir-obj-y), $(real-obj-y)) $(real-obj-m) $(lib-y)
420 targets += $(extra-y) $(MAKECMDGOALS) $(always)
421
422 # Linker scripts preprocessor (.lds.S -> .lds)
423 # ---------------------------------------------------------------------------
424 quiet_cmd_cpp_lds_S = LDS     $@
425       cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
426                              -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
427
428 $(obj)/%.lds: $(src)/%.lds.S FORCE
429         $(call if_changed_dep,cpp_lds_S)
430
431 # ASN.1 grammar
432 # ---------------------------------------------------------------------------
433 quiet_cmd_asn1_compiler = ASN.1   $@
434       cmd_asn1_compiler = $(objtree)/scripts/asn1_compiler $< \
435                                 $(subst .h,.c,$@) $(subst .c,.h,$@)
436
437 $(obj)/%.asn1.c $(obj)/%.asn1.h: $(src)/%.asn1 $(objtree)/scripts/asn1_compiler
438         $(call cmd,asn1_compiler)
439
440 # Build the compiled-in targets
441 # ---------------------------------------------------------------------------
442
443 # To build objects in subdirs, we need to descend into the directories
444 $(sort $(subdir-obj-y)): $(subdir-ym) ;
445
446 #
447 # Rule to compile a set of .o files into one .o file
448 #
449 ifdef builtin-target
450
451 # built-in.a archives are made with no symbol table or index which
452 # makes them small and fast, but unable to be used by the linker.
453 # scripts/link-vmlinux.sh builds an aggregate built-in.a with a symbol
454 # table and index.
455 quiet_cmd_ar_builtin = AR      $@
456       cmd_ar_builtin = rm -f $@; \
457                      $(AR) rcSTP$(KBUILD_ARFLAGS) $@ $(filter $(real-obj-y), $^)
458
459 $(builtin-target): $(real-obj-y) FORCE
460         $(call if_changed,ar_builtin)
461
462 targets += $(builtin-target)
463 endif # builtin-target
464
465 #
466 # Rule to create modules.order file
467 #
468 # Create commands to either record .ko file or cat modules.order from
469 # a subdirectory
470 modorder-cmds =                                         \
471         $(foreach m, $(modorder),                       \
472                 $(if $(filter %/modules.order, $m),     \
473                         cat $m;, echo kernel/$m;))
474
475 $(modorder-target): $(subdir-ym) FORCE
476         $(Q)(cat /dev/null; $(modorder-cmds)) > $@
477
478 #
479 # Rule to compile a set of .o files into one .a file
480 #
481 ifdef lib-target
482 quiet_cmd_link_l_target = AR      $@
483
484 # lib target archives do get a symbol table and index
485 cmd_link_l_target = rm -f $@; $(AR) rcsTP$(KBUILD_ARFLAGS) $@ $(lib-y)
486
487 $(lib-target): $(lib-y) FORCE
488         $(call if_changed,link_l_target)
489
490 targets += $(lib-target)
491
492 dummy-object = $(obj)/.lib_exports.o
493 ksyms-lds = $(dot-target).lds
494
495 quiet_cmd_export_list = EXPORTS $@
496 cmd_export_list = $(OBJDUMP) -h $< | \
497         sed -ne '/___ksymtab/s/.*+\([^ ]*\).*/EXTERN(\1)/p' >$(ksyms-lds);\
498         rm -f $(dummy-object);\
499         echo | $(CC) $(a_flags) -c -o $(dummy-object) -x assembler -;\
500         $(LD) $(ld_flags) -r -o $@ -T $(ksyms-lds) $(dummy-object);\
501         rm $(dummy-object) $(ksyms-lds)
502
503 $(obj)/lib-ksyms.o: $(lib-target) FORCE
504         $(call if_changed,export_list)
505
506 targets += $(obj)/lib-ksyms.o
507
508 endif
509
510 #
511 # Rule to link composite objects
512 #
513 #  Composite objects are specified in kbuild makefile as follows:
514 #    <composite-object>-objs := <list of .o files>
515 #  or
516 #    <composite-object>-y    := <list of .o files>
517 #  or
518 #    <composite-object>-m    := <list of .o files>
519 #  The -m syntax only works if <composite object> is a module
520 link_multi_deps =                     \
521 $(filter $(addprefix $(obj)/,         \
522 $($(subst $(obj)/,,$(@:.o=-objs)))    \
523 $($(subst $(obj)/,,$(@:.o=-y)))       \
524 $($(subst $(obj)/,,$(@:.o=-m)))), $^)
525
526 quiet_cmd_link_multi-m = LD [M]  $@
527 cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
528
529 $(multi-used-m): FORCE
530         $(call if_changed,link_multi-m)
531         @{ echo $(@:.o=.ko); echo $(link_multi_deps); \
532            $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
533 $(call multi_depend, $(multi-used-m), .o, -objs -y -m)
534
535 targets += $(multi-used-m)
536 targets := $(filter-out $(PHONY), $(targets))
537
538 # Add intermediate targets:
539 # When building objects with specific suffix patterns, add intermediate
540 # targets that the final targets are derived from.
541 intermediate_targets = $(foreach sfx, $(2), \
542                                 $(patsubst %$(strip $(1)),%$(sfx), \
543                                         $(filter %$(strip $(1)), $(targets))))
544 # %.asn1.o <- %.asn1.[ch] <- %.asn1
545 # %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
546 # %.lex.o <- %.lex.c <- %.l
547 # %.tab.o <- %.tab.[ch] <- %.y
548 targets += $(call intermediate_targets, .asn1.o, .asn1.c .asn1.h) \
549            $(call intermediate_targets, .dtb.o, .dtb.S .dtb) \
550            $(call intermediate_targets, .lex.o, .lex.c) \
551            $(call intermediate_targets, .tab.o, .tab.c .tab.h)
552
553 # Descending
554 # ---------------------------------------------------------------------------
555
556 PHONY += $(subdir-ym)
557 $(subdir-ym):
558         $(Q)$(MAKE) $(build)=$@ need-builtin=$(if $(findstring $@,$(subdir-obj-y)),1)
559
560 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
561 # ---------------------------------------------------------------------------
562
563 PHONY += FORCE
564
565 FORCE:
566
567 # Read all saved command lines and dependencies for the $(targets) we
568 # may be building above, using $(if_changed{,_dep}). As an
569 # optimization, we don't need to read them if the target does not
570 # exist, we will rebuild anyway in that case.
571
572 cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
573
574 ifneq ($(cmd_files),)
575   include $(cmd_files)
576 endif
577
578 ifneq ($(KBUILD_SRC),)
579 # Create directories for object files if they do not exist
580 obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
581 # If cmd_files exist, their directories apparently exist.  Skip mkdir.
582 exist-dirs := $(sort $(patsubst %/,%, $(dir $(cmd_files))))
583 obj-dirs := $(strip $(filter-out $(exist-dirs), $(obj-dirs)))
584 ifneq ($(obj-dirs),)
585 $(shell mkdir -p $(obj-dirs))
586 endif
587 endif
588
589 # Some files contained in $(targets) are intermediate artifacts.
590 # We never want them to be removed automatically.
591 .SECONDARY: $(targets)
592
593 # Declare the contents of the .PHONY variable as phony.  We keep that
594 # information in a variable se we can use it in if_changed and friends.
595
596 .PHONY: $(PHONY)