3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # This tag specifies the encoding used for all characters in the config file
18 # that follow. The default is UTF-8 which is also the encoding used for all
19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
20 # iconv built into libc) for the transcoding. See
21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
23 DOXYFILE_ENCODING = UTF-8
25 # The PROJECT_NAME tag is a single word (or sequence of words) that should
26 # identify the project. Note that if you do not use Doxywizard you need
27 # to put quotes around the project name if it contains spaces.
29 PROJECT_NAME = "IoTivity C++ SDK"
31 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
32 # This could be handy for archiving the generated documentation or
33 # if some version control system is used.
37 # Using the PROJECT_BRIEF tag one can provide an optional one line description
38 # for a project that appears at the top of each page and should give viewer
39 # a quick idea about the purpose of the project. Keep the description short.
43 # With the PROJECT_LOGO tag one can specify an logo or icon that is
44 # included in the documentation. The maximum height of the logo should not
45 # exceed 55 pixels and the maximum width should not exceed 200 pixels.
46 # Doxygen will copy the logo to the output directory.
50 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
51 # base path where the generated documentation will be put.
52 # If a relative path is entered, it will be relative to the location
53 # where doxygen was started. If left blank the current directory will be used.
55 OUTPUT_DIRECTORY = docs
57 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
58 # 4096 sub-directories (in 2 levels) under the output directory of each output
59 # format and will distribute the generated files over these directories.
60 # Enabling this option can be useful when feeding doxygen a huge amount of
61 # source files, where putting all generated files in the same directory would
62 # otherwise cause performance problems for the file system.
66 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
67 # documentation generated by doxygen is written. Doxygen will use this
68 # information to generate all constant output in the proper language.
69 # The default language is English, other supported languages are:
70 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
71 # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
72 # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
73 # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
74 # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
75 # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
77 OUTPUT_LANGUAGE = English
79 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
80 # include brief member descriptions after the members that are listed in
81 # the file and class documentation (similar to JavaDoc).
82 # Set to NO to disable this.
84 BRIEF_MEMBER_DESC = YES
86 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
87 # the brief description of a member or function before the detailed description.
88 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
89 # brief descriptions will be completely suppressed.
93 # This tag implements a quasi-intelligent brief description abbreviator
94 # that is used to form the text in various listings. Each string
95 # in this list, if found as the leading text of the brief description, will be
96 # stripped from the text and the result after processing the whole list, is
97 # used as the annotated text. Otherwise, the brief description is used as-is.
98 # If left blank, the following values are used ("$name" is automatically
99 # replaced with the name of the entity): "The $name class" "The $name widget"
100 # "The $name file" "is" "provides" "specifies" "contains"
101 # "represents" "a" "an" "the"
103 ABBREVIATE_BRIEF = "The $name class" \
115 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
116 # Doxygen will generate a detailed section even if there is only a brief
119 ALWAYS_DETAILED_SEC = NO
121 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
122 # inherited members of a class in the documentation of that class as if those
123 # members were ordinary class members. Constructors, destructors and assignment
124 # operators of the base classes will not be shown.
126 INLINE_INHERITED_MEMB = NO
128 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
129 # path before files name in the file list and in the header files. If set
130 # to NO the shortest path that makes the file name unique will be used.
134 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
135 # can be used to strip a user-defined part of the path. Stripping is
136 # only done if one of the specified strings matches the left-hand part of
137 # the path. The tag can be used to show relative paths in the file list.
138 # If left blank the directory from which doxygen is run is used as the
139 # path to strip. Note that you specify absolute paths here, but also
140 # relative paths, which will be relative from the directory where doxygen is
145 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
146 # the path mentioned in the documentation of a class, which tells
147 # the reader which header file to include in order to use a class.
148 # If left blank only the name of the header file containing the class
149 # definition is used. Otherwise one should specify the include paths that
150 # are normally passed to the compiler using the -I flag.
152 STRIP_FROM_INC_PATH =
154 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
155 # (but less readable) file names. This can be useful if your file system
156 # doesn't support long names like on DOS, Mac, or CD-ROM.
160 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
161 # will interpret the first line (until the first dot) of a JavaDoc-style
162 # comment as the brief description. If set to NO, the JavaDoc
163 # comments will behave just like regular Qt-style comments
164 # (thus requiring an explicit @brief command for a brief description.)
166 JAVADOC_AUTOBRIEF = YES
168 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
169 # interpret the first line (until the first dot) of a Qt-style
170 # comment as the brief description. If set to NO, the comments
171 # will behave just like regular Qt-style comments (thus requiring
172 # an explicit \brief command for a brief description.)
176 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
177 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
178 # comments) as a brief description. This used to be the default behaviour.
179 # The new default is to treat a multi-line C++ comment block as a detailed
180 # description. Set this tag to YES if you prefer the old behaviour instead.
182 MULTILINE_CPP_IS_BRIEF = NO
184 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
185 # member inherits the documentation from any documented member that it
190 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
191 # a new page for each member. If set to NO, the documentation of a member will
192 # be part of the file/class/namespace that contains it.
194 SEPARATE_MEMBER_PAGES = NO
196 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
197 # Doxygen uses this value to replace tabs by spaces in code fragments.
201 # This tag can be used to specify a number of aliases that acts
202 # as commands in the documentation. An alias has the form "name=value".
203 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
204 # put the command \sideeffect (or @sideeffect) in the documentation, which
205 # will result in a user-defined paragraph with heading "Side Effects:".
206 # You can put \n's in the value part of an alias to insert newlines.
210 # This tag can be used to specify a number of word-keyword mappings (TCL only).
211 # A mapping has the form "name=value". For example adding
212 # "class=itcl::class" will allow you to use the command class in the
213 # itcl::class meaning.
217 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
218 # sources only. Doxygen will then generate output that is more tailored for C.
219 # For instance, some of the names that are used will be different. The list
220 # of all members will be omitted, etc.
222 OPTIMIZE_OUTPUT_FOR_C = NO
224 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
225 # sources only. Doxygen will then generate output that is more tailored for
226 # Java. For instance, namespaces will be presented as packages, qualified
227 # scopes will look different, etc.
229 OPTIMIZE_OUTPUT_JAVA = NO
231 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
232 # sources only. Doxygen will then generate output that is more tailored for
235 OPTIMIZE_FOR_FORTRAN = NO
237 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
238 # sources. Doxygen will then generate output that is tailored for
241 OPTIMIZE_OUTPUT_VHDL = NO
243 # Doxygen selects the parser to use depending on the extension of the files it
244 # parses. With this tag you can assign which parser to use for a given
245 # extension. Doxygen has a built-in mapping, but you can override or extend it
246 # using this tag. The format is ext=language, where ext is a file extension,
247 # and language is one of the parsers supported by doxygen: IDL, Java,
248 # Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,
249 # C++. For instance to make doxygen treat .inc files as Fortran files (default
250 # is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note
251 # that for custom extensions you also need to set FILE_PATTERNS otherwise the
252 # files are not read by doxygen.
256 # If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
257 # comments according to the Markdown format, which allows for more readable
258 # documentation. See http://daringfireball.net/projects/markdown/ for details.
259 # The output of markdown processing is further processed by doxygen, so you
260 # can mix doxygen, HTML, and XML commands with Markdown formatting.
261 # Disable only in case of backward compatibilities issues.
263 MARKDOWN_SUPPORT = YES
265 # When enabled doxygen tries to link words that correspond to documented classes,
266 # or namespaces to their corresponding documentation. Such a link can be
267 # prevented in individual cases by by putting a % sign in front of the word or
268 # globally by setting AUTOLINK_SUPPORT to NO.
270 AUTOLINK_SUPPORT = YES
272 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
273 # to include (a tag file for) the STL sources as input, then you should
274 # set this tag to YES in order to let doxygen match functions declarations and
275 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
276 # func(std::string) {}). This also makes the inheritance and collaboration
277 # diagrams that involve STL classes more complete and accurate.
279 BUILTIN_STL_SUPPORT = NO
281 # If you use Microsoft's C++/CLI language, you should set this option to YES to
282 # enable parsing support.
286 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
287 # Doxygen will parse them like normal C++ but will assume all classes use public
288 # instead of private inheritance when no explicit protection keyword is present.
292 # For Microsoft's IDL there are propget and propput attributes to indicate
293 # getter and setter methods for a property. Setting this option to YES (the
294 # default) will make doxygen replace the get and set methods by a property in
295 # the documentation. This will only work if the methods are indeed getting or
296 # setting a simple type. If this is not the case, or you want to show the
297 # methods anyway, you should set this option to NO.
299 IDL_PROPERTY_SUPPORT = YES
301 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
302 # tag is set to YES, then doxygen will reuse the documentation of the first
303 # member in the group (if any) for the other members of the group. By default
304 # all members of a group must be documented explicitly.
306 DISTRIBUTE_GROUP_DOC = NO
308 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
309 # the same type (for instance a group of public functions) to be put as a
310 # subgroup of that type (e.g. under the Public Functions section). Set it to
311 # NO to prevent subgrouping. Alternatively, this can be done per class using
312 # the \nosubgrouping command.
316 # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
317 # unions are shown inside the group in which they are included (e.g. using
318 # @ingroup) instead of on a separate page (for HTML and Man pages) or
319 # section (for LaTeX and RTF).
321 INLINE_GROUPED_CLASSES = NO
323 # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
324 # unions with only public data fields will be shown inline in the documentation
325 # of the scope in which they are defined (i.e. file, namespace, or group
326 # documentation), provided this scope is documented. If set to NO (the default),
327 # structs, classes, and unions are shown on a separate page (for HTML and Man
328 # pages) or section (for LaTeX and RTF).
330 INLINE_SIMPLE_STRUCTS = NO
332 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
333 # is documented as struct, union, or enum with the name of the typedef. So
334 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
335 # with name TypeT. When disabled the typedef will appear as a member of a file,
336 # namespace, or class. And the struct will be named TypeS. This can typically
337 # be useful for C code in case the coding convention dictates that all compound
338 # types are typedef'ed and only the typedef is referenced, never the tag name.
340 TYPEDEF_HIDES_STRUCT = NO
342 # Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
343 # set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
344 # their name and scope. Since this can be an expensive process and often the
345 # same symbol appear multiple times in the code, doxygen keeps a cache of
346 # pre-resolved symbols. If the cache is too small doxygen will become slower.
347 # If the cache is too large, memory is wasted. The cache size is given by this
348 # formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
349 # corresponding to a cache size of 2^16 = 65536 symbols.
351 LOOKUP_CACHE_SIZE = 0
353 #---------------------------------------------------------------------------
354 # Build related configuration options
355 #---------------------------------------------------------------------------
357 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
358 # documentation are documented, even if no documentation was available.
359 # Private class members and static file members will be hidden unless
360 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
364 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
365 # will be included in the documentation.
369 # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
370 # scope will be included in the documentation.
374 # If the EXTRACT_STATIC tag is set to YES all static members of a file
375 # will be included in the documentation.
379 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
380 # defined locally in source files will be included in the documentation.
381 # If set to NO only classes defined in header files are included.
383 EXTRACT_LOCAL_CLASSES = YES
385 # This flag is only useful for Objective-C code. When set to YES local
386 # methods, which are defined in the implementation section but not in
387 # the interface are included in the documentation.
388 # If set to NO (the default) only methods in the interface are included.
390 EXTRACT_LOCAL_METHODS = NO
392 # If this flag is set to YES, the members of anonymous namespaces will be
393 # extracted and appear in the documentation as a namespace called
394 # 'anonymous_namespace{file}', where file will be replaced with the base
395 # name of the file that contains the anonymous namespace. By default
396 # anonymous namespaces are hidden.
398 EXTRACT_ANON_NSPACES = NO
400 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
401 # undocumented members of documented classes, files or namespaces.
402 # If set to NO (the default) these members will be included in the
403 # various overviews, but no documentation section is generated.
404 # This option has no effect if EXTRACT_ALL is enabled.
406 HIDE_UNDOC_MEMBERS = NO
408 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
409 # undocumented classes that are normally visible in the class hierarchy.
410 # If set to NO (the default) these classes will be included in the various
411 # overviews. This option has no effect if EXTRACT_ALL is enabled.
413 HIDE_UNDOC_CLASSES = NO
415 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
416 # friend (class|struct|union) declarations.
417 # If set to NO (the default) these declarations will be included in the
420 HIDE_FRIEND_COMPOUNDS = NO
422 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
423 # documentation blocks found inside the body of a function.
424 # If set to NO (the default) these blocks will be appended to the
425 # function's detailed documentation block.
427 HIDE_IN_BODY_DOCS = NO
429 # The INTERNAL_DOCS tag determines if documentation
430 # that is typed after a \internal command is included. If the tag is set
431 # to NO (the default) then the documentation will be excluded.
432 # Set it to YES to include the internal documentation.
436 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
437 # file names in lower-case letters. If set to YES upper-case letters are also
438 # allowed. This is useful if you have classes or files whose names only differ
439 # in case and if your file system supports case sensitive file names. Windows
440 # and Mac users are advised to set this option to NO.
442 CASE_SENSE_NAMES = NO
444 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
445 # will show members with their full class and namespace scopes in the
446 # documentation. If set to YES the scope will be hidden.
448 HIDE_SCOPE_NAMES = NO
450 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
451 # will put a list of the files that are included by a file in the documentation
454 SHOW_INCLUDE_FILES = NO
456 # If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
457 # will list include files with double quotes in the documentation
458 # rather than with sharp brackets.
460 FORCE_LOCAL_INCLUDES = NO
462 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
463 # is inserted in the documentation for inline members.
467 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
468 # will sort the (detailed) documentation of file and class members
469 # alphabetically by member name. If set to NO the members will appear in
472 SORT_MEMBER_DOCS = YES
474 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
475 # brief documentation of file, namespace and class members alphabetically
476 # by member name. If set to NO (the default) the members will appear in
481 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
482 # will sort the (brief and detailed) documentation of class members so that
483 # constructors and destructors are listed first. If set to NO (the default)
484 # the constructors will appear in the respective orders defined by
485 # SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
486 # This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
487 # and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
489 SORT_MEMBERS_CTORS_1ST = NO
491 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
492 # hierarchy of group names into alphabetical order. If set to NO (the default)
493 # the group names will appear in their defined order.
495 SORT_GROUP_NAMES = NO
497 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
498 # sorted by fully-qualified names, including namespaces. If set to
499 # NO (the default), the class list will be sorted only by class name,
500 # not including the namespace part.
501 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
502 # Note: This option applies only to the class list, not to the
505 SORT_BY_SCOPE_NAME = NO
507 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
508 # do proper type resolution of all parameters of a function it will reject a
509 # match between the prototype and the implementation of a member function even
510 # if there is only one candidate or it is obvious which candidate to choose
511 # by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
512 # will still accept a match between prototype and implementation in such cases.
514 STRICT_PROTO_MATCHING = NO
516 # The GENERATE_TODOLIST tag can be used to enable (YES) or
517 # disable (NO) the todo list. This list is created by putting \todo
518 # commands in the documentation.
520 GENERATE_TODOLIST = YES
522 # The GENERATE_TESTLIST tag can be used to enable (YES) or
523 # disable (NO) the test list. This list is created by putting \test
524 # commands in the documentation.
526 GENERATE_TESTLIST = YES
528 # The GENERATE_BUGLIST tag can be used to enable (YES) or
529 # disable (NO) the bug list. This list is created by putting \bug
530 # commands in the documentation.
532 GENERATE_BUGLIST = YES
534 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
535 # disable (NO) the deprecated list. This list is created by putting
536 # \deprecated commands in the documentation.
538 GENERATE_DEPRECATEDLIST= YES
540 # The ENABLED_SECTIONS tag can be used to enable conditional
541 # documentation sections, marked by \if sectionname ... \endif.
545 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
546 # the initial value of a variable or macro consists of for it to appear in
547 # the documentation. If the initializer consists of more lines than specified
548 # here it will be hidden. Use a value of 0 to hide initializers completely.
549 # The appearance of the initializer of individual variables and macros in the
550 # documentation can be controlled using \showinitializer or \hideinitializer
551 # command in the documentation regardless of this setting.
553 MAX_INITIALIZER_LINES = 125
555 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
556 # at the bottom of the documentation of classes and structs. If set to YES the
557 # list will mention the files that were used to generate the documentation.
559 SHOW_USED_FILES = YES
561 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
562 # This will remove the Files entry from the Quick Index and from the
563 # Folder Tree View (if specified). The default is YES.
567 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
568 # Namespaces page. This will remove the Namespaces entry from the Quick Index
569 # and from the Folder Tree View (if specified). The default is YES.
571 SHOW_NAMESPACES = YES
573 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
574 # doxygen should invoke to get the current version for each file (typically from
575 # the version control system). Doxygen will invoke the program by executing (via
576 # popen()) the command <command> <input-file>, where <command> is the value of
577 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
578 # provided by doxygen. Whatever the program writes to standard output
579 # is used as the file version. See the manual for examples.
581 FILE_VERSION_FILTER =
583 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
584 # by doxygen. The layout file controls the global structure of the generated
585 # output files in an output format independent way. To create the layout file
586 # that represents doxygen's defaults, run doxygen with the -l option.
587 # You can optionally specify a file name after the option, if omitted
588 # DoxygenLayout.xml will be used as the name of the layout file.
590 LAYOUT_FILE = doxygenLayout.xml
592 # The CITE_BIB_FILES tag can be used to specify one or more bib files
593 # containing the references data. This must be a list of .bib files. The
594 # .bib extension is automatically appended if omitted. Using this command
595 # requires the bibtex tool to be installed. See also
596 # http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
597 # of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
598 # feature you need bibtex and perl available in the search path.
602 #---------------------------------------------------------------------------
603 # configuration options related to warning and progress messages
604 #---------------------------------------------------------------------------
606 # The QUIET tag can be used to turn on/off the messages that are generated
607 # by doxygen. Possible values are YES and NO. If left blank NO is used.
611 # The WARNINGS tag can be used to turn on/off the warning messages that are
612 # generated by doxygen. Possible values are YES and NO. If left blank
617 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
618 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
619 # automatically be disabled.
621 WARN_IF_UNDOCUMENTED = YES
623 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
624 # potential errors in the documentation, such as not documenting some
625 # parameters in a documented function, or documenting parameters that
626 # don't exist or using markup commands wrongly.
628 WARN_IF_DOC_ERROR = YES
630 # The WARN_NO_PARAMDOC option can be enabled to get warnings for
631 # functions that are documented, but have no documentation for their parameters
632 # or return value. If set to NO (the default) doxygen will only warn about
633 # wrong or incomplete parameter documentation, but not about the absence of
636 WARN_NO_PARAMDOC = NO
638 # The WARN_FORMAT tag determines the format of the warning messages that
639 # doxygen can produce. The string should contain the $file, $line, and $text
640 # tags, which will be replaced by the file and line number from which the
641 # warning originated and the warning text. Optionally the format may contain
642 # $version, which will be replaced by the version of the file (if it could
643 # be obtained via FILE_VERSION_FILTER)
645 WARN_FORMAT = "$file:$line: $text"
647 # The WARN_LOGFILE tag can be used to specify a file to which warning
648 # and error messages should be written. If left blank the output is written
651 WARN_LOGFILE = ./doxygen.log
653 #---------------------------------------------------------------------------
654 # configuration options related to the input files
655 #---------------------------------------------------------------------------
657 # The INPUT tag can be used to specify the files and/or directories that contain
658 # documented source files. You may enter file names like "myfile.cpp" or
659 # directories like "/usr/src/myproject". Separate the files or directories
663 ../../include/OCApi.h \
664 ../../include/OCPlatform.h \
665 ../../include/OCRepresentation.h \
666 ../../include/OCResourceRequest.h \
667 ../../include/OCResourceResponse.h \
668 ../../include/OCResource.h \
669 ../../include/OCProvisioningManager.h \
670 ../../csdk/stack/include/octypes.h \
671 ../../csdk/stack/include/ocstackconfig.h \
673 ../../../service/resource-encapsulation/include \
674 ../../../service/resource-hosting/include \
675 ../../../service/resource-container/include \
676 ../../../service/resource-container/bundle-api/include \
677 ../../../service/things-manager/sdk/inc/ThingsConfiguration.h \
678 ../../../service/things-manager/sdk/inc/ThingsMaintenance.h \
679 ../../../service/easy-setup/mediator/richsdk/inc/ \
680 ../../../service/easy-setup/inc \
681 ../../../service/scene-manager/include \
683 # This tag can be used to specify the character encoding of the source files
684 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
685 # also the default input encoding. Doxygen uses libiconv (or the iconv built
686 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
687 # the list of possible encodings.
689 INPUT_ENCODING = UTF-8
691 # If the value of the INPUT tag contains directories, you can use the
692 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
693 # and *.h) to filter out the source-files in the directories. If left
694 # blank the following patterns are tested:
695 # *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
696 # *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
697 # *.f90 *.f *.for *.vhd *.vhdl
699 FILE_PATTERNS = *.c \
735 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
736 # should be searched for input files as well. Possible values are YES and NO.
737 # If left blank NO is used.
741 # The EXCLUDE tag can be used to specify files and/or directories that should be
742 # excluded from the INPUT source files. This way you can easily exclude a
743 # subdirectory from a directory tree whose root is specified with the INPUT tag.
744 # Note that relative paths are relative to the directory from which doxygen is
749 # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
750 # directories that are symbolic links (a Unix file system feature) are excluded
753 EXCLUDE_SYMLINKS = NO
755 # If the value of the INPUT tag contains directories, you can use the
756 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
757 # certain files from those directories. Note that the wildcards are matched
758 # against the file with absolute path, so to exclude all test directories
759 # for example use the pattern */test/*
763 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
764 # (namespaces, classes, functions, etc.) that should be excluded from the
765 # output. The symbol name can be a fully qualified name, a word, or if the
766 # wildcard * is used, a substring. Examples: ANamespace, AClass,
767 # AClass::ANamespace, ANamespace::*Test
771 # The EXAMPLE_PATH tag can be used to specify one or more files or
772 # directories that contain example code fragments that are included (see
773 # the \include command).
777 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
778 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
779 # and *.h) to filter out the source-files in the directories. If left
780 # blank all files are included.
784 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
785 # searched for input files to be used with the \include or \dontinclude
786 # commands irrespective of the value of the RECURSIVE tag.
787 # Possible values are YES and NO. If left blank NO is used.
789 EXAMPLE_RECURSIVE = NO
791 # The IMAGE_PATH tag can be used to specify one or more files or
792 # directories that contain image that are included in the documentation (see
793 # the \image command).
797 # The INPUT_FILTER tag can be used to specify a program that doxygen should
798 # invoke to filter for each input file. Doxygen will invoke the filter program
799 # by executing (via popen()) the command <filter> <input-file>, where <filter>
800 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
801 # input file. Doxygen will then use the output that the filter program writes
802 # to standard output. If FILTER_PATTERNS is specified, this tag will be
807 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
808 # basis. Doxygen will compare the file name with each pattern and apply the
809 # filter if there is a match. The filters are a list of the form:
810 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
811 # info on how filters are used. If FILTER_PATTERNS is empty or if
812 # non of the patterns match the file name, INPUT_FILTER is applied.
816 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
817 # INPUT_FILTER) will be used to filter the input files when producing source
818 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
820 FILTER_SOURCE_FILES = NO
822 # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
823 # pattern. A pattern will override the setting for FILTER_PATTERN (if any)
824 # and it is also possible to disable source filtering for a specific pattern
825 # using *.ext= (so without naming a filter). This option only has effect when
826 # FILTER_SOURCE_FILES is enabled.
828 FILTER_SOURCE_PATTERNS =
830 #---------------------------------------------------------------------------
831 # configuration options related to source browsing
832 #---------------------------------------------------------------------------
834 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
835 # be generated. Documented entities will be cross-referenced with these sources.
836 # Note: To get rid of all source code in the generated output, make sure also
837 # VERBATIM_HEADERS is set to NO.
841 # Setting the INLINE_SOURCES tag to YES will include the body
842 # of functions and classes directly in the documentation.
846 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
847 # doxygen to hide any special comment blocks from generated source code
848 # fragments. Normal C, C++ and Fortran comments will always remain visible.
850 STRIP_CODE_COMMENTS = YES
852 # If the REFERENCED_BY_RELATION tag is set to YES
853 # then for each documented function all documented
854 # functions referencing it will be listed.
856 REFERENCED_BY_RELATION = NO
858 # If the REFERENCES_RELATION tag is set to YES
859 # then for each documented function all documented entities
860 # called/used by that function will be listed.
862 REFERENCES_RELATION = NO
864 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
865 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
866 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
867 # link to the source code. Otherwise they will link to the documentation.
869 REFERENCES_LINK_SOURCE = YES
871 # If the USE_HTAGS tag is set to YES then the references to source code
872 # will point to the HTML generated by the htags(1) tool instead of doxygen
873 # built-in source browser. The htags tool is part of GNU's global source
874 # tagging system (see http://www.gnu.org/software/global/global.html). You
875 # will need version 4.8.6 or higher.
879 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
880 # will generate a verbatim copy of the header file for each class for
881 # which an include is specified. Set to NO to disable this.
883 VERBATIM_HEADERS = YES
885 #---------------------------------------------------------------------------
886 # configuration options related to the alphabetical class index
887 #---------------------------------------------------------------------------
889 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
890 # of all compounds will be generated. Enable this if the project
891 # contains a lot of classes, structs, unions or interfaces.
893 ALPHABETICAL_INDEX = YES
895 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
896 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
897 # in which this list will be split (can be a number in the range [1..20])
899 COLS_IN_ALPHA_INDEX = 5
901 # In case all classes in a project start with a common prefix, all
902 # classes will be put under the same header in the alphabetical index.
903 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
904 # should be ignored while generating the index headers.
908 #---------------------------------------------------------------------------
909 # configuration options related to the HTML output
910 #---------------------------------------------------------------------------
912 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
913 # generate HTML output.
917 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
918 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
919 # put in front of it. If left blank `html' will be used as the default path.
923 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
924 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
925 # doxygen will generate files with .html extension.
927 HTML_FILE_EXTENSION = .html
929 # The HTML_HEADER tag can be used to specify a personal HTML header for
930 # each generated HTML page. If it is left blank doxygen will generate a
931 # standard header. Note that when using a custom header you are responsible
932 # for the proper inclusion of any scripts and style sheets that doxygen
933 # needs, which is dependent on the configuration options used.
934 # It is advised to generate a default header using "doxygen -w html
935 # header.html footer.html stylesheet.css YourConfigFile" and then modify
936 # that header. Note that the header is subject to change so you typically
937 # have to redo this when upgrading to a newer version of doxygen or when
938 # changing the value of configuration settings such as GENERATE_TREEVIEW!
942 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
943 # each generated HTML page. If it is left blank doxygen will generate a
946 HTML_FOOTER = html/footer.html
948 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
949 # style sheet that is used by each HTML page. It can be used to
950 # fine-tune the look of the HTML output. If left blank doxygen will
951 # generate a default style sheet. Note that it is recommended to use
952 # HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this
953 # tag will in the future become obsolete.
957 # The HTML_EXTRA_STYLESHEET tag can be used to specify an additional
958 # user-defined cascading style sheet that is included after the standard
959 # style sheets created by doxygen. Using this option one can overrule
960 # certain style aspects. This is preferred over using HTML_STYLESHEET
961 # since it does not replace the standard style sheet and is therefor more
962 # robust against future updates. Doxygen will copy the style sheet file to
963 # the output directory.
965 HTML_EXTRA_STYLESHEET =
967 # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
968 # other source files which should be copied to the HTML output directory. Note
969 # that these files will be copied to the base HTML output directory. Use the
970 # $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
971 # files. In the HTML_STYLESHEET file, use the file name only. Also note that
972 # the files will be copied as-is; there are no commands or markers available.
976 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
977 # Doxygen will adjust the colors in the style sheet and background images
978 # according to this color. Hue is specified as an angle on a colorwheel,
979 # see http://en.wikipedia.org/wiki/Hue for more information.
980 # For instance the value 0 represents red, 60 is yellow, 120 is green,
981 # 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
982 # The allowed range is 0 to 359.
984 HTML_COLORSTYLE_HUE = 220
986 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
987 # the colors in the HTML output. For a value of 0 the output will use
988 # grayscales only. A value of 255 will produce the most vivid colors.
990 HTML_COLORSTYLE_SAT = 100
992 # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
993 # the luminance component of the colors in the HTML output. Values below
994 # 100 gradually make the output lighter, whereas values above 100 make
995 # the output darker. The value divided by 100 is the actual gamma applied,
996 # so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
997 # and 100 does not change the gamma.
999 HTML_COLORSTYLE_GAMMA = 80
1001 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1002 # page will contain the date and time when the page was generated. Setting
1003 # this to NO can help when comparing the output of multiple runs.
1005 HTML_TIMESTAMP = YES
1007 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1008 # documentation will contain sections that can be hidden and shown after the
1011 HTML_DYNAMIC_SECTIONS = NO
1013 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
1014 # entries shown in the various tree structured indices initially; the user
1015 # can expand and collapse entries dynamically later on. Doxygen will expand
1016 # the tree to such a level that at most the specified number of entries are
1017 # visible (unless a fully collapsed tree already exceeds this amount).
1018 # So setting the number of entries 1 will produce a full collapsed tree by
1019 # default. 0 is a special value representing an infinite number of entries
1020 # and will result in a full expanded tree by default.
1022 HTML_INDEX_NUM_ENTRIES = 100
1024 # If the GENERATE_DOCSET tag is set to YES, additional index files
1025 # will be generated that can be used as input for Apple's Xcode 3
1026 # integrated development environment, introduced with OSX 10.5 (Leopard).
1027 # To create a documentation set, doxygen will generate a Makefile in the
1028 # HTML output directory. Running make will produce the docset in that
1029 # directory and running "make install" will install the docset in
1030 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
1032 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1033 # for more information.
1035 GENERATE_DOCSET = NO
1037 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
1038 # feed. A documentation feed provides an umbrella under which multiple
1039 # documentation sets from a single provider (such as a company or product suite)
1042 DOCSET_FEEDNAME = "Doxygen generated docs"
1044 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
1045 # should uniquely identify the documentation set bundle. This should be a
1046 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
1047 # will append .docset to the name.
1049 DOCSET_BUNDLE_ID = org.doxygen.Project
1051 # When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely
1052 # identify the documentation publisher. This should be a reverse domain-name
1053 # style string, e.g. com.mycompany.MyDocSet.documentation.
1055 DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1057 # The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
1059 DOCSET_PUBLISHER_NAME = Publisher
1061 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
1062 # will be generated that can be used as input for tools like the
1063 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
1064 # of the generated HTML documentation.
1066 GENERATE_HTMLHELP = NO
1068 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
1069 # be used to specify the file name of the resulting .chm file. You
1070 # can add a path in front of the file if the result should not be
1071 # written to the html output directory.
1075 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
1076 # be used to specify the location (absolute path including file name) of
1077 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
1078 # the HTML help compiler on the generated index.hhp.
1082 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
1083 # controls if a separate .chi index file is generated (YES) or that
1084 # it should be included in the master .chm file (NO).
1088 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
1089 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
1092 CHM_INDEX_ENCODING =
1094 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
1095 # controls whether a binary table of contents is generated (YES) or a
1096 # normal table of contents (NO) in the .chm file.
1100 # The TOC_EXPAND flag can be set to YES to add extra items for group members
1101 # to the contents of the HTML help documentation and to the tree view.
1105 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1106 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
1107 # that can be used as input for Qt's qhelpgenerator to generate a
1108 # Qt Compressed Help (.qch) of the generated HTML documentation.
1112 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
1113 # be used to specify the file name of the resulting .qch file.
1114 # The path specified is relative to the HTML output folder.
1118 # The QHP_NAMESPACE tag specifies the namespace to use when generating
1119 # Qt Help Project output. For more information please see
1120 # http://doc.trolltech.com/qthelpproject.html#namespace
1122 QHP_NAMESPACE = org.doxygen.Project
1124 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
1125 # Qt Help Project output. For more information please see
1126 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
1128 QHP_VIRTUAL_FOLDER = doc
1130 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
1131 # add. For more information please see
1132 # http://doc.trolltech.com/qthelpproject.html#custom-filters
1134 QHP_CUST_FILTER_NAME =
1136 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
1137 # custom filter to add. For more information please see
1138 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
1139 # Qt Help Project / Custom Filters</a>.
1141 QHP_CUST_FILTER_ATTRS =
1143 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1145 # filter section matches.
1146 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
1147 # Qt Help Project / Filter Attributes</a>.
1149 QHP_SECT_FILTER_ATTRS =
1151 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
1152 # be used to specify the location of Qt's qhelpgenerator.
1153 # If non-empty doxygen will try to run qhelpgenerator on the generated
1158 # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
1159 # will be generated, which together with the HTML files, form an Eclipse help
1160 # plugin. To install this plugin and make it available under the help contents
1161 # menu in Eclipse, the contents of the directory containing the HTML and XML
1162 # files needs to be copied into the plugins directory of eclipse. The name of
1163 # the directory within the plugins directory should be the same as
1164 # the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
1167 GENERATE_ECLIPSEHELP = NO
1169 # A unique identifier for the eclipse help plugin. When installing the plugin
1170 # the directory name containing the HTML and XML files should also have
1173 ECLIPSE_DOC_ID = org.doxygen.Project
1175 # The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
1176 # at top of each HTML page. The value NO (the default) enables the index and
1177 # the value YES disables it. Since the tabs have the same information as the
1178 # navigation tree you can set this option to NO if you already set
1179 # GENERATE_TREEVIEW to YES.
1183 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1184 # structure should be generated to display hierarchical information.
1185 # If the tag value is set to YES, a side panel will be generated
1186 # containing a tree-like index structure (just like the one that
1187 # is generated for HTML Help). For this to work a browser that supports
1188 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
1189 # Windows users are probably better off using the HTML help feature.
1190 # Since the tree basically has the same information as the tab index you
1191 # could consider to set DISABLE_INDEX to NO when enabling this option.
1193 GENERATE_TREEVIEW = YES
1195 # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
1196 # (range [0,1..20]) that doxygen will group on one line in the generated HTML
1197 # documentation. Note that a value of 0 will completely suppress the enum
1198 # values from appearing in the overview section.
1200 ENUM_VALUES_PER_LINE = 4
1202 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
1203 # used to set the initial width (in pixels) of the frame in which the tree
1206 TREEVIEW_WIDTH = 250
1208 # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
1209 # links to external symbols imported via tag files in a separate window.
1211 EXT_LINKS_IN_WINDOW = NO
1213 # Use this tag to change the font size of Latex formulas included
1214 # as images in the HTML documentation. The default is 10. Note that
1215 # when you change the font size after a successful doxygen run you need
1216 # to manually remove any form_*.png images from the HTML output directory
1217 # to force them to be regenerated.
1219 FORMULA_FONTSIZE = 10
1221 # Use the FORMULA_TRANPARENT tag to determine whether or not the images
1222 # generated for formulas are transparent PNGs. Transparent PNGs are
1223 # not supported properly for IE 6.0, but are supported on all modern browsers.
1224 # Note that when changing this option you need to delete any form_*.png files
1225 # in the HTML output before the changes have effect.
1227 FORMULA_TRANSPARENT = YES
1229 # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
1230 # (see http://www.mathjax.org) which uses client side Javascript for the
1231 # rendering instead of using prerendered bitmaps. Use this if you do not
1232 # have LaTeX installed or if you want to formulas look prettier in the HTML
1233 # output. When enabled you may also need to install MathJax separately and
1234 # configure the path to it using the MATHJAX_RELPATH option.
1238 # When MathJax is enabled you need to specify the location relative to the
1239 # HTML output directory using the MATHJAX_RELPATH option. The destination
1240 # directory should contain the MathJax.js script. For instance, if the mathjax
1241 # directory is located at the same level as the HTML output directory, then
1242 # MATHJAX_RELPATH should be ../mathjax. The default value points to
1243 # the MathJax Content Delivery Network so you can quickly see the result without
1244 # installing MathJax. However, it is strongly recommended to install a local
1245 # copy of MathJax from http://www.mathjax.org before deployment.
1247 MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1249 # The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
1250 # names that should be enabled during MathJax rendering.
1252 MATHJAX_EXTENSIONS =
1254 # When the SEARCHENGINE tag is enabled doxygen will generate a search box
1255 # for the HTML output. The underlying search engine uses javascript
1256 # and DHTML and should work on any modern browser. Note that when using
1257 # HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
1258 # (GENERATE_DOCSET) there is already a search function so this one should
1259 # typically be disabled. For large projects the javascript based search engine
1260 # can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
1264 # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1265 # implemented using a PHP enabled web server instead of at the web client
1266 # using Javascript. Doxygen will generate the search PHP script and index
1267 # file to put on the web server. The advantage of the server
1268 # based approach is that it scales better to large projects and allows
1269 # full text search. The disadvantages are that it is more difficult to setup
1270 # and does not have live searching capabilities.
1272 SERVER_BASED_SEARCH = NO
1274 #---------------------------------------------------------------------------
1275 # configuration options related to the LaTeX output
1276 #---------------------------------------------------------------------------
1278 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
1279 # generate Latex output.
1283 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
1284 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1285 # put in front of it. If left blank `latex' will be used as the default path.
1287 LATEX_OUTPUT = latex
1289 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1290 # invoked. If left blank `latex' will be used as the default command name.
1291 # Note that when enabling USE_PDFLATEX this option is only used for
1292 # generating bitmaps for formulas in the HTML output, but not in the
1293 # Makefile that is written to the output directory.
1295 LATEX_CMD_NAME = latex
1297 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1298 # generate index for LaTeX. If left blank `makeindex' will be used as the
1299 # default command name.
1301 MAKEINDEX_CMD_NAME = makeindex
1303 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1304 # LaTeX documents. This may be useful for small projects and may help to
1305 # save some trees in general.
1309 # The PAPER_TYPE tag can be used to set the paper type that is used
1310 # by the printer. Possible values are: a4, letter, legal and
1311 # executive. If left blank a4wide will be used.
1315 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1316 # packages that should be included in the LaTeX output.
1320 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1321 # the generated latex document. The header should contain everything until
1322 # the first chapter. If it is left blank doxygen will generate a
1323 # standard header. Notice: only use this tag if you know what you are doing!
1327 # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
1328 # the generated latex document. The footer should contain everything after
1329 # the last chapter. If it is left blank doxygen will generate a
1330 # standard footer. Notice: only use this tag if you know what you are doing!
1334 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1335 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
1336 # contain links (just like the HTML output) instead of page references
1337 # This makes the output suitable for online browsing using a pdf viewer.
1339 PDF_HYPERLINKS = YES
1341 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1342 # plain latex in the generated Makefile. Set this option to YES to get a
1343 # higher quality PDF documentation.
1347 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1348 # command to the generated LaTeX files. This will instruct LaTeX to keep
1349 # running if errors occur, instead of asking the user for help.
1350 # This option is also used when generating formulas in HTML.
1352 LATEX_BATCHMODE = NO
1354 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
1355 # include the index chapters (such as File Index, Compound Index, etc.)
1358 LATEX_HIDE_INDICES = NO
1360 # If LATEX_SOURCE_CODE is set to YES then doxygen will include
1361 # source code with syntax highlighting in the LaTeX output.
1362 # Note that which sources are shown also depends on other settings
1363 # such as SOURCE_BROWSER.
1365 LATEX_SOURCE_CODE = NO
1367 # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1368 # bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
1369 # http://en.wikipedia.org/wiki/BibTeX for more info.
1371 LATEX_BIB_STYLE = plain
1373 #---------------------------------------------------------------------------
1374 # configuration options related to the RTF output
1375 #---------------------------------------------------------------------------
1377 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1378 # The RTF output is optimized for Word 97 and may not look very pretty with
1379 # other RTF readers or editors.
1383 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1384 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1385 # put in front of it. If left blank `rtf' will be used as the default path.
1389 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1390 # RTF documents. This may be useful for small projects and may help to
1391 # save some trees in general.
1395 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1396 # will contain hyperlink fields. The RTF file will
1397 # contain links (just like the HTML output) instead of page references.
1398 # This makes the output suitable for online browsing using WORD or other
1399 # programs which support those fields.
1400 # Note: wordpad (write) and others do not support links.
1404 # Load style sheet definitions from file. Syntax is similar to doxygen's
1405 # config file, i.e. a series of assignments. You only have to provide
1406 # replacements, missing definitions are set to their default value.
1408 RTF_STYLESHEET_FILE =
1410 # Set optional variables used in the generation of an rtf document.
1411 # Syntax is similar to doxygen's config file.
1413 RTF_EXTENSIONS_FILE =
1415 #---------------------------------------------------------------------------
1416 # configuration options related to the man page output
1417 #---------------------------------------------------------------------------
1419 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1420 # generate man pages
1424 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
1425 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1426 # put in front of it. If left blank `man' will be used as the default path.
1430 # The MAN_EXTENSION tag determines the extension that is added to
1431 # the generated man pages (default is the subroutine's section .3)
1435 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1436 # then it will generate one additional man file for each entity
1437 # documented in the real man page(s). These additional files
1438 # only source the real man page, but without them the man command
1439 # would be unable to find the correct page. The default is NO.
1443 #---------------------------------------------------------------------------
1444 # configuration options related to the XML output
1445 #---------------------------------------------------------------------------
1447 # If the GENERATE_XML tag is set to YES Doxygen will
1448 # generate an XML file that captures the structure of
1449 # the code including all documentation.
1453 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
1454 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1455 # put in front of it. If left blank `xml' will be used as the default path.
1459 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1460 # dump the program listings (including syntax highlighting
1461 # and cross-referencing information) to the XML output. Note that
1462 # enabling this will significantly increase the size of the XML output.
1464 XML_PROGRAMLISTING = YES
1466 #---------------------------------------------------------------------------
1467 # configuration options for the AutoGen Definitions output
1468 #---------------------------------------------------------------------------
1470 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1471 # generate an AutoGen Definitions (see autogen.sf.net) file
1472 # that captures the structure of the code including all
1473 # documentation. Note that this feature is still experimental
1474 # and incomplete at the moment.
1476 GENERATE_AUTOGEN_DEF = NO
1478 #---------------------------------------------------------------------------
1479 # configuration options related to the Perl module output
1480 #---------------------------------------------------------------------------
1482 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1483 # generate a Perl module file that captures the structure of
1484 # the code including all documentation. Note that this
1485 # feature is still experimental and incomplete at the
1488 GENERATE_PERLMOD = NO
1490 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1491 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1492 # to generate PDF and DVI output from the Perl module output.
1496 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1497 # nicely formatted so it can be parsed by a human reader. This is useful
1498 # if you want to understand what is going on. On the other hand, if this
1499 # tag is set to NO the size of the Perl module output will be much smaller
1500 # and Perl will parse it just the same.
1502 PERLMOD_PRETTY = YES
1504 # The names of the make variables in the generated doxyrules.make file
1505 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1506 # This is useful so different doxyrules.make files included by the same
1507 # Makefile don't overwrite each other's variables.
1509 PERLMOD_MAKEVAR_PREFIX =
1511 #---------------------------------------------------------------------------
1512 # Configuration options related to the preprocessor
1513 #---------------------------------------------------------------------------
1515 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1516 # evaluate all C-preprocessor directives found in the sources and include
1519 ENABLE_PREPROCESSING = YES
1521 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1522 # names in the source code. If set to NO (the default) only conditional
1523 # compilation will be performed. Macro expansion can be done in a controlled
1524 # way by setting EXPAND_ONLY_PREDEF to YES.
1526 MACRO_EXPANSION = NO
1528 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1529 # then the macro expansion is limited to the macros specified with the
1530 # PREDEFINED and EXPAND_AS_DEFINED tags.
1532 EXPAND_ONLY_PREDEF = NO
1534 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1535 # pointed to by INCLUDE_PATH will be searched when a #include is found.
1537 SEARCH_INCLUDES = YES
1539 # The INCLUDE_PATH tag can be used to specify one or more directories that
1540 # contain include files that are not input files but should be processed by
1545 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1546 # patterns (like *.h and *.hpp) to filter out the header-files in the
1547 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1550 INCLUDE_FILE_PATTERNS =
1552 # The PREDEFINED tag can be used to specify one or more macro names that
1553 # are defined before the preprocessor is started (similar to the -D option of
1554 # gcc). The argument of the tag is a list of macros of the form: name
1555 # or name=definition (no spaces). If the definition and the = are
1556 # omitted =1 is assumed. To prevent a macro definition from being
1557 # undefined via #undef or recursively expanded use the := operator
1558 # instead of the = operator.
1562 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1563 # this tag can be used to specify a list of macro names that should be expanded.
1564 # The macro definition that is found in the sources will be used.
1565 # Use the PREDEFINED tag if you want to use a different macro definition that
1566 # overrules the definition found in the source code.
1570 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1571 # doxygen's preprocessor will remove all references to function-like macros
1572 # that are alone on a line, have an all uppercase name, and do not end with a
1573 # semicolon, because these will confuse the parser if not removed.
1575 SKIP_FUNCTION_MACROS = YES
1577 #---------------------------------------------------------------------------
1578 # Configuration::additions related to external references
1579 #---------------------------------------------------------------------------
1581 # The TAGFILES option can be used to specify one or more tagfiles. For each
1582 # tag file the location of the external documentation should be added. The
1583 # format of a tag file without this location is as follows:
1584 # TAGFILES = file1 file2 ...
1585 # Adding location for the tag files is done as follows:
1586 # TAGFILES = file1=loc1 "file2 = loc2" ...
1587 # where "loc1" and "loc2" can be relative or absolute paths
1588 # or URLs. Note that each tag file must have a unique name (where the name does
1589 # NOT include the path). If a tag file is not located in the directory in which
1590 # doxygen is run, you must also specify the path to the tagfile here.
1594 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1595 # a tag file that is based on the input files it reads.
1599 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1600 # in the class index. If set to NO only the inherited external classes
1605 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1606 # in the modules index. If set to NO, only the current project's groups will
1609 EXTERNAL_GROUPS = YES
1611 # The PERL_PATH should be the absolute path and name of the perl script
1612 # interpreter (i.e. the result of `which perl').
1614 PERL_PATH = /usr/bin/perl
1616 #---------------------------------------------------------------------------
1617 # Configuration options related to the dot tool
1618 #---------------------------------------------------------------------------
1620 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1621 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1622 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1623 # this option also works with HAVE_DOT disabled, but it is recommended to
1624 # install and use dot, since it yields more powerful graphs.
1628 # You can define message sequence charts within doxygen comments using the \msc
1629 # command. Doxygen will then run the mscgen tool (see
1630 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1631 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
1632 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1633 # default search path.
1637 # If set to YES, the inheritance and collaboration graphs will hide
1638 # inheritance and usage relations if the target is undocumented
1639 # or is not a class.
1641 HIDE_UNDOC_RELATIONS = YES
1643 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1644 # available from the path. This tool is part of Graphviz, a graph visualization
1645 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1646 # have no effect if this option is set to NO (the default)
1650 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
1651 # allowed to run in parallel. When set to 0 (the default) doxygen will
1652 # base this on the number of processors available in the system. You can set it
1653 # explicitly to a value larger than 0 to get control over the balance
1654 # between CPU load and processing speed.
1658 # By default doxygen will use the Helvetica font for all dot files that
1659 # doxygen generates. When you want a differently looking font you can specify
1660 # the font name using DOT_FONTNAME. You need to make sure dot is able to find
1661 # the font, which can be done by putting it in a standard location or by setting
1662 # the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
1663 # directory containing the font.
1665 DOT_FONTNAME = Helvetica
1667 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1668 # The default size is 10pt.
1672 # By default doxygen will tell dot to use the Helvetica font.
1673 # If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
1674 # set the path where dot can find it.
1678 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1679 # will generate a graph for each documented class showing the direct and
1680 # indirect inheritance relations. Setting this tag to YES will force the
1681 # CLASS_DIAGRAMS tag to NO.
1685 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1686 # will generate a graph for each documented class showing the direct and
1687 # indirect implementation dependencies (inheritance, containment, and
1688 # class references variables) of the class with other documented classes.
1690 COLLABORATION_GRAPH = YES
1692 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1693 # will generate a graph for groups, showing the direct groups dependencies
1697 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1698 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1703 # If the UML_LOOK tag is enabled, the fields and methods are shown inside
1704 # the class node. If there are many fields or methods and many nodes the
1705 # graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
1706 # threshold limits the number of items for each type to make the size more
1707 # manageable. Set this to 0 for no limit. Note that the threshold may be
1708 # exceeded by 50% before the limit is enforced.
1710 UML_LIMIT_NUM_FIELDS = 10
1712 # If set to YES, the inheritance and collaboration graphs will show the
1713 # relations between templates and their instances.
1715 TEMPLATE_RELATIONS = NO
1717 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1718 # tags are set to YES then doxygen will generate a graph for each documented
1719 # file showing the direct and indirect include dependencies of the file with
1720 # other documented files.
1724 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1725 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1726 # documented header file showing the documented files that directly or
1727 # indirectly include this file.
1729 INCLUDED_BY_GRAPH = YES
1731 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
1732 # doxygen will generate a call dependency graph for every global function
1733 # or class method. Note that enabling this option will significantly increase
1734 # the time of a run. So in most cases it will be better to enable call graphs
1735 # for selected functions only using the \callgraph command.
1739 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1740 # doxygen will generate a caller dependency graph for every global function
1741 # or class method. Note that enabling this option will significantly increase
1742 # the time of a run. So in most cases it will be better to enable caller
1743 # graphs for selected functions only using the \callergraph command.
1747 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1748 # will generate a graphical hierarchy of all classes instead of a textual one.
1750 GRAPHICAL_HIERARCHY = YES
1752 # If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
1753 # then doxygen will show the dependencies a directory has on other directories
1754 # in a graphical way. The dependency relations are determined by the #include
1755 # relations between the files in the directories.
1757 DIRECTORY_GRAPH = YES
1759 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1760 # generated by dot. Possible values are svg, png, jpg, or gif.
1761 # If left blank png will be used. If you choose svg you need to set
1762 # HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1763 # visible in IE 9+ (other browsers do not have this requirement).
1765 DOT_IMAGE_FORMAT = png
1767 # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
1768 # enable generation of interactive SVG images that allow zooming and panning.
1769 # Note that this requires a modern browser other than Internet Explorer.
1770 # Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
1771 # need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
1772 # visible. Older versions of IE do not have SVG support.
1774 INTERACTIVE_SVG = NO
1776 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1777 # found. If left blank, it is assumed the dot tool can be found in the path.
1781 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1782 # contain dot files that are included in the documentation (see the
1783 # \dotfile command).
1787 # The MSCFILE_DIRS tag can be used to specify one or more directories that
1788 # contain msc files that are included in the documentation (see the
1789 # \mscfile command).
1793 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1794 # nodes that will be shown in the graph. If the number of nodes in a graph
1795 # becomes larger than this value, doxygen will truncate the graph, which is
1796 # visualized by representing a node as a red box. Note that doxygen if the
1797 # number of direct children of the root node in a graph is already larger than
1798 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1799 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1801 DOT_GRAPH_MAX_NODES = 50
1803 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1804 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1805 # from the root by following a path via at most 3 edges will be shown. Nodes
1806 # that lay further from the root node will be omitted. Note that setting this
1807 # option to 1 or 2 may greatly reduce the computation time needed for large
1808 # code bases. Also note that the size of a graph can be further restricted by
1809 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1811 MAX_DOT_GRAPH_DEPTH = 0
1813 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1814 # background. This is disabled by default, because dot on Windows does not
1815 # seem to support this out of the box. Warning: Depending on the platform used,
1816 # enabling this option may lead to badly anti-aliased labels on the edges of
1817 # a graph (i.e. they become hard to read).
1819 DOT_TRANSPARENT = NO
1821 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1822 # files in one run (i.e. multiple -o and -T options on the command line). This
1823 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1824 # support this, this feature is disabled by default.
1826 DOT_MULTI_TARGETS = NO
1828 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1829 # generate a legend page explaining the meaning of the various boxes and
1830 # arrows in the dot generated graphs.
1832 GENERATE_LEGEND = YES
1834 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1835 # remove the intermediate dot files that are used to generate
1836 # the various graphs.