resource/csdk/connectivity/build/linux/Makefile

   1 #/******************************************************************
   2 # *
   3 # * Copyright 2014 Samsung Electronics All Rights Reserved.
   4 # *
   5 # *
   6 # *
   7 # * Licensed under the Apache License, Version 2.0 (the "License");
   8 # * you may not use this file except in compliance with the License.
   9 # * You may obtain a copy of the License at
  10 # *
  11 # *      http://www.apache.org/licenses/LICENSE-2.0
  12 # *
  13 # * Unless required by applicable law or agreed to in writing, software
  14 # * distributed under the License is distributed on an "AS IS" BASIS,
  15 # * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  16 # * See the License for the specific language governing permissions and
  17 # * limitations under the License.
  18 # *
  19 #******************************************************************/
  20
  21 # override with `make BUILD=debug`
  22 # default to release build
  23 # default to build for linux
  24 BUILD = release
  25 PLATFORM = linux
  26 TRANSPORT = ALL
  27 OBJ_DIR = ./$(BUILD)
  28 VERSION_MAJOR = 0
  29 VERSION_MINOR = 1
  30 VERSION_PATCH = 0
  31
  32 COMMON_MAKE = common.mk
  33
  34 include $(COMMON_MAKE)
  35
  36 #Modify below values to enable/disable the Adapter
  37 #Suffix "NO_" to disable given adapter
  38 EDR = NO_EDR_ADAPTER
  39 WIFI = WIFI_ADAPTER
  40 LE = NO_LE_ADAPTER
  41 ETHERNET = NO_ETHERNET_ADAPTER
  42
  43 #Add Pre processor definitions
  44 DEFINE_FLAG = -D$(EDR) -D$(LE) -D$(WIFI) -D$(ETHERNET)
  45
  46 #Add Debug flags here
  47 DEBUG_FLAG = -DTB_LOG
  48
  49 ##
  50 ##      definitions
  51 ##
  52 LIB_PREFIX                              = CA
  53 ETHERNET_ADAPTER                = ethernet_adapter
  54 WIFI_ADAPTER                    = wifi_adapter
  55 BT_ADAPTER                              = bt_edr_adapter
  56 BLE_ADAPTER                             = bt_le_adapter
  57 ETHERNET_ADAPTER_PATH   = $(PROJECT_SRC_PATH)/$(ETHERNET_ADAPTER)/$(PLATFORM)
  58 WIFI_ADAPTER_PATH               = $(PROJECT_SRC_PATH)/$(WIFI_ADAPTER)/$(PLATFORM)
  59 BT_ADAPTER_PATH                 = $(PROJECT_SRC_PATH)/$(BT_ADAPTER)/$(PLATFORM)
  60 BLE_ADAPTER_PATH                = $(PROJECT_SRC_PATH)/$(BLE_ADAPTER)/$(PLATFORM)
  61 TARGET                                  = lib$(PROJECT_NAME).so.$(VERSION_MAJOR).$(VERSION_MINOR).$(VERSION_PATCH)
  62 TARGET_ALIAS                    = lib$(PROJECT_NAME).so
  63
  64 ##
  65 ##      libcoap
  66 ##
  67 libcoap_build_dir = $(PROJECT_LIB_PATH)/libcoap-4.1.1
  68
  69 LDFLAGS:=-L$(libcoap_build_dir)
  70 LDLIBS:=-lcoap
  71
  72 BUILD_FLAG.debug        = $(DEFINE_FLAG) $(DEBUG_FLAG)
  73 BUILD_FLAG.release      =       $(DEFINE_FLAG)
  74 BUILD_FLAG = $(BUILD_FLAG.$(BUILD))
  75
  76 DEBUG_DIR = ./debug
  77 RELEASE_DIR = ./release
  78
  79 ##
  80 ##      file declaration
  81 ##
  82 COMPONENT_SRCS                  =  \
  83 logger.c oic_malloc.c oic_logger.c oic_console_logger.c \
  84 caconnectivitymanager.c caremotehandler.c cainterfacecontroller.c camessagehandler.c    \
  85 canetworkconfigurator.c caedradapter.c caleadapter.c    \
  86 caethernetadapter.c cawifiadapter.c \
  87 caprotocolmessage.c cawificore.c        \
  88 uqueue.c uarraylist.c umutex.c uthreadpool.c \
  89
  90 COMPONENT_OBJS                  = $(COMPONENT_SRCS:%.c=$(OBJ_DIR)/%.o)
  91
  92 ##
  93 ##      compiler flags
  94 ##
  95 CFLAGS                          =       -g -c -Wall -fPIC `pkg-config --cflags glib-2.0`
  96
  97 LFLAGS                          =       -ldl -lpthread `pkg-config --libs glib-2.0`
  98
  99 IFLAGS                          =       -I$(PROJECT_COMMON_INC_PATH)    \
 100                                                 -I$(PROJECT_API_PATH)   \
 101                                                 -I$(PROJECT_INC_PATH)   \
 102                                                 -I$(ETHERNET_ADAPTER_PATH)      \
 103                                                 -I$(WIFI_ADAPTER_PATH)  \
 104                                                 -I$(BT_ADAPTER_PATH)    \
 105                                                 -I$(BLE_ADAPTER_PATH)   \
 106                         -I$(libcoap_build_dir)
 107
 108 DFLAGS                          = -DLINUX               \
 109                       -DWITH_POSIX              \
 110                       $(BUILD_FLAG)\
 111 ##
 112 ##      compile and link rules
 113 ##
 114 vpath %.c $(PROJECT_COMMON_SRC_PATH)
 115 vpath %.c $(ETHERNET_ADAPTER_PATH)
 116 vpath %.c $(WIFI_ADAPTER_PATH)
 117 vpath %.c $(BT_ADAPTER_PATH)
 118 vpath %.c $(BLE_ADAPTER_PATH)
 119 vpath %.c $(PROJECT_SRC_PATH)
 120
 121 $(OBJ_DIR)/%.o: %.c
 122         @$(MAKE_OBJ_PATH)
 123         @$(CC) -o $@ $(CFLAGS) $(DFLAGS) $(IFLAGS) $<
 124
 125 all : $(TARGET)
 126         @echo   " "
 127         @echo   "======================"
 128         @echo   "       Success!!"
 129         @echo   "======================"
 130
 131 $(TARGET) : $(COMPONENT_OBJS)
 132         @$(MAKE_PROJECT_OUT_PATH)
 133         @$(CC) -shared -Wl,-soname,$(TARGET) -o $@ $(COMPONENT_OBJS) $(LFLAGS) $(LDFLAGS) $(LDLIBS)
 134         @$(MV) $(TARGET) $(PROJECT_OUT_PATH)/.
 135         @$(CD) $(PROJECT_OUT_PATH); $(MAKE_TARGET_ALIAS)
 136
 137 clean :
 138         @$(RM) $(DEBUG_DIR) $(RELEASE_DIR)\
 139                         $(PROJECT_OUT_PATH)
 140
 141 install :
 142         @$(MAKE_PROJECT_OUT_PATH)
 143
 144 ##
 145 ##      macros
 146 ##
 147 define MAKE_OBJ_PATH
 148         @if [ ! -d $(OBJ_DIR) ]; then \
 149         mkdir $(OBJ_DIR); \
 150         fi
 151 endef
 152
 153 define MAKE_TARGET_ALIAS
 154         if [ ! -f $(TARGET_ALIAS) ]; then \
 155         $(LN) -s $(TARGET) $(TARGET_ALIAS); \
 156         fi
 157 endef
 158
 159 .PHONY: all clean install
 160
 161