5 * 'A fair jaw-cracker dwarf-language must be.' --Samwise Gamgee
7 * [p.285 of _The Lord of the Rings_, II/iii: "The Ring Goes South"]
10 /* This file contains functions for compiling a regular expression. See
11 * also regexec.c which funnily enough, contains functions for executing
12 * a regular expression.
14 * This file is also copied at build time to ext/re/re_comp.c, where
15 * it's built with -DPERL_EXT_RE_BUILD -DPERL_EXT_RE_DEBUG -DPERL_EXT.
16 * This causes the main functions to be compiled under new names and with
17 * debugging support added, which makes "use re 'debug'" work.
20 /* NOTE: this is derived from Henry Spencer's regexp code, and should not
21 * confused with the original package (see point 3 below). Thanks, Henry!
24 /* Additional note: this code is very heavily munged from Henry's version
25 * in places. In some spots I've traded clarity for efficiency, so don't
26 * blame Henry for some of the lack of readability.
29 /* The names of the functions have been changed from regcomp and
30 * regexec to pregcomp and pregexec in order to avoid conflicts
31 * with the POSIX routines of the same names.
34 #ifdef PERL_EXT_RE_BUILD
39 * pregcomp and pregexec -- regsub and regerror are not used in perl
41 * Copyright (c) 1986 by University of Toronto.
42 * Written by Henry Spencer. Not derived from licensed software.
44 * Permission is granted to anyone to use this software for any
45 * purpose on any computer system, and to redistribute it freely,
46 * subject to the following restrictions:
48 * 1. The author is not responsible for the consequences of use of
49 * this software, no matter how awful, even if they arise
52 * 2. The origin of this software must not be misrepresented, either
53 * by explicit claim or by omission.
55 * 3. Altered versions must be plainly marked as such, and must not
56 * be misrepresented as being the original software.
59 **** Alterations to Henry's code are...
61 **** Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
62 **** 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
63 **** by Larry Wall and others
65 **** You may distribute under the terms of either the GNU General Public
66 **** License or the Artistic License, as specified in the README file.
69 * Beware that some of this code is subtly aware of the way operator
70 * precedence is structured in regular expressions. Serious changes in
71 * regular-expression syntax might require a total rethink.
74 #define PERL_IN_REGCOMP_C
77 #ifndef PERL_IN_XSUB_RE
82 #ifdef PERL_IN_XSUB_RE
84 extern const struct regexp_engine my_reg_engine;
89 #include "dquote_static.c"
90 #include "charclass_invlists.h"
91 #include "inline_invlist.c"
92 #include "unicode_constants.h"
94 #define HAS_NONLATIN1_FOLD_CLOSURE(i) _HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i)
95 #define IS_NON_FINAL_FOLD(c) _IS_NON_FINAL_FOLD_ONLY_FOR_USE_BY_REGCOMP_DOT_C(c)
96 #define IS_IN_SOME_FOLD_L1(c) _IS_IN_SOME_FOLD_ONLY_FOR_USE_BY_REGCOMP_DOT_C(c)
103 # if defined(BUGGY_MSC6)
104 /* MSC 6.00A breaks on op/regexp.t test 85 unless we turn this off */
105 # pragma optimize("a",off)
106 /* But MSC 6.00A is happy with 'w', for aliases only across function calls*/
107 # pragma optimize("w",on )
108 # endif /* BUGGY_MSC6 */
112 #define STATIC static
116 typedef struct RExC_state_t {
117 U32 flags; /* RXf_* are we folding, multilining? */
118 U32 pm_flags; /* PMf_* stuff from the calling PMOP */
119 char *precomp; /* uncompiled string. */
120 REGEXP *rx_sv; /* The SV that is the regexp. */
121 regexp *rx; /* perl core regexp structure */
122 regexp_internal *rxi; /* internal data for regexp object pprivate field */
123 char *start; /* Start of input for compile */
124 char *end; /* End of input for compile */
125 char *parse; /* Input-scan pointer. */
126 I32 whilem_seen; /* number of WHILEM in this expr */
127 regnode *emit_start; /* Start of emitted-code area */
128 regnode *emit_bound; /* First regnode outside of the allocated space */
129 regnode *emit; /* Code-emit pointer; if = &emit_dummy,
130 implies compiling, so don't emit */
131 regnode emit_dummy; /* placeholder for emit to point to */
132 I32 naughty; /* How bad is this pattern? */
133 I32 sawback; /* Did we see \1, ...? */
135 I32 size; /* Code size. */
136 I32 npar; /* Capture buffer count, (OPEN). */
137 I32 cpar; /* Capture buffer count, (CLOSE). */
138 I32 nestroot; /* root parens we are in - used by accept */
141 regnode **open_parens; /* pointers to open parens */
142 regnode **close_parens; /* pointers to close parens */
143 regnode *opend; /* END node in program */
144 I32 utf8; /* whether the pattern is utf8 or not */
145 I32 orig_utf8; /* whether the pattern was originally in utf8 */
146 /* XXX use this for future optimisation of case
147 * where pattern must be upgraded to utf8. */
148 I32 uni_semantics; /* If a d charset modifier should use unicode
149 rules, even if the pattern is not in
151 HV *paren_names; /* Paren names */
153 regnode **recurse; /* Recurse regops */
154 I32 recurse_count; /* Number of recurse regops */
157 I32 override_recoding;
158 I32 in_multi_char_class;
159 struct reg_code_block *code_blocks; /* positions of literal (?{})
161 int num_code_blocks; /* size of code_blocks[] */
162 int code_index; /* next code_blocks[] slot */
164 char *starttry; /* -Dr: where regtry was called. */
165 #define RExC_starttry (pRExC_state->starttry)
167 SV *runtime_code_qr; /* qr with the runtime code blocks */
169 const char *lastparse;
171 AV *paren_name_list; /* idx -> name */
172 #define RExC_lastparse (pRExC_state->lastparse)
173 #define RExC_lastnum (pRExC_state->lastnum)
174 #define RExC_paren_name_list (pRExC_state->paren_name_list)
178 #define RExC_flags (pRExC_state->flags)
179 #define RExC_pm_flags (pRExC_state->pm_flags)
180 #define RExC_precomp (pRExC_state->precomp)
181 #define RExC_rx_sv (pRExC_state->rx_sv)
182 #define RExC_rx (pRExC_state->rx)
183 #define RExC_rxi (pRExC_state->rxi)
184 #define RExC_start (pRExC_state->start)
185 #define RExC_end (pRExC_state->end)
186 #define RExC_parse (pRExC_state->parse)
187 #define RExC_whilem_seen (pRExC_state->whilem_seen)
188 #ifdef RE_TRACK_PATTERN_OFFSETS
189 #define RExC_offsets (pRExC_state->rxi->u.offsets) /* I am not like the others */
191 #define RExC_emit (pRExC_state->emit)
192 #define RExC_emit_dummy (pRExC_state->emit_dummy)
193 #define RExC_emit_start (pRExC_state->emit_start)
194 #define RExC_emit_bound (pRExC_state->emit_bound)
195 #define RExC_naughty (pRExC_state->naughty)
196 #define RExC_sawback (pRExC_state->sawback)
197 #define RExC_seen (pRExC_state->seen)
198 #define RExC_size (pRExC_state->size)
199 #define RExC_npar (pRExC_state->npar)
200 #define RExC_nestroot (pRExC_state->nestroot)
201 #define RExC_extralen (pRExC_state->extralen)
202 #define RExC_seen_zerolen (pRExC_state->seen_zerolen)
203 #define RExC_utf8 (pRExC_state->utf8)
204 #define RExC_uni_semantics (pRExC_state->uni_semantics)
205 #define RExC_orig_utf8 (pRExC_state->orig_utf8)
206 #define RExC_open_parens (pRExC_state->open_parens)
207 #define RExC_close_parens (pRExC_state->close_parens)
208 #define RExC_opend (pRExC_state->opend)
209 #define RExC_paren_names (pRExC_state->paren_names)
210 #define RExC_recurse (pRExC_state->recurse)
211 #define RExC_recurse_count (pRExC_state->recurse_count)
212 #define RExC_in_lookbehind (pRExC_state->in_lookbehind)
213 #define RExC_contains_locale (pRExC_state->contains_locale)
214 #define RExC_override_recoding (pRExC_state->override_recoding)
215 #define RExC_in_multi_char_class (pRExC_state->in_multi_char_class)
218 #define ISMULT1(c) ((c) == '*' || (c) == '+' || (c) == '?')
219 #define ISMULT2(s) ((*s) == '*' || (*s) == '+' || (*s) == '?' || \
220 ((*s) == '{' && regcurly(s, FALSE)))
223 #undef SPSTART /* dratted cpp namespace... */
226 * Flags to be passed up and down.
228 #define WORST 0 /* Worst case. */
229 #define HASWIDTH 0x01 /* Known to match non-null strings. */
231 /* Simple enough to be STAR/PLUS operand; in an EXACTish node must be a single
232 * character. (There needs to be a case: in the switch statement in regexec.c
233 * for any node marked SIMPLE.) Note that this is not the same thing as
236 #define SPSTART 0x04 /* Starts with * or + */
237 #define POSTPONED 0x08 /* (?1),(?&name), (??{...}) or similar */
238 #define TRYAGAIN 0x10 /* Weeded out a declaration. */
239 #define RESTART_UTF8 0x20 /* Restart, need to calcuate sizes as UTF-8 */
241 #define REG_NODE_NUM(x) ((x) ? (int)((x)-RExC_emit_start) : -1)
243 /* whether trie related optimizations are enabled */
244 #if PERL_ENABLE_EXTENDED_TRIE_OPTIMISATION
245 #define TRIE_STUDY_OPT
246 #define FULL_TRIE_STUDY
252 #define PBYTE(u8str,paren) ((U8*)(u8str))[(paren) >> 3]
253 #define PBITVAL(paren) (1 << ((paren) & 7))
254 #define PAREN_TEST(u8str,paren) ( PBYTE(u8str,paren) & PBITVAL(paren))
255 #define PAREN_SET(u8str,paren) PBYTE(u8str,paren) |= PBITVAL(paren)
256 #define PAREN_UNSET(u8str,paren) PBYTE(u8str,paren) &= (~PBITVAL(paren))
258 #define REQUIRE_UTF8 STMT_START { \
260 *flagp = RESTART_UTF8; \
265 /* This converts the named class defined in regcomp.h to its equivalent class
266 * number defined in handy.h. */
267 #define namedclass_to_classnum(class) ((int) ((class) / 2))
268 #define classnum_to_namedclass(classnum) ((classnum) * 2)
270 /* About scan_data_t.
272 During optimisation we recurse through the regexp program performing
273 various inplace (keyhole style) optimisations. In addition study_chunk
274 and scan_commit populate this data structure with information about
275 what strings MUST appear in the pattern. We look for the longest
276 string that must appear at a fixed location, and we look for the
277 longest string that may appear at a floating location. So for instance
282 Both 'FOO' and 'A' are fixed strings. Both 'B' and 'BAR' are floating
283 strings (because they follow a .* construct). study_chunk will identify
284 both FOO and BAR as being the longest fixed and floating strings respectively.
286 The strings can be composites, for instance
290 will result in a composite fixed substring 'foo'.
292 For each string some basic information is maintained:
294 - offset or min_offset
295 This is the position the string must appear at, or not before.
296 It also implicitly (when combined with minlenp) tells us how many
297 characters must match before the string we are searching for.
298 Likewise when combined with minlenp and the length of the string it
299 tells us how many characters must appear after the string we have
303 Only used for floating strings. This is the rightmost point that
304 the string can appear at. If set to I32 max it indicates that the
305 string can occur infinitely far to the right.
308 A pointer to the minimum number of characters of the pattern that the
309 string was found inside. This is important as in the case of positive
310 lookahead or positive lookbehind we can have multiple patterns
315 The minimum length of the pattern overall is 3, the minimum length
316 of the lookahead part is 3, but the minimum length of the part that
317 will actually match is 1. So 'FOO's minimum length is 3, but the
318 minimum length for the F is 1. This is important as the minimum length
319 is used to determine offsets in front of and behind the string being
320 looked for. Since strings can be composites this is the length of the
321 pattern at the time it was committed with a scan_commit. Note that
322 the length is calculated by study_chunk, so that the minimum lengths
323 are not known until the full pattern has been compiled, thus the
324 pointer to the value.
328 In the case of lookbehind the string being searched for can be
329 offset past the start point of the final matching string.
330 If this value was just blithely removed from the min_offset it would
331 invalidate some of the calculations for how many chars must match
332 before or after (as they are derived from min_offset and minlen and
333 the length of the string being searched for).
334 When the final pattern is compiled and the data is moved from the
335 scan_data_t structure into the regexp structure the information
336 about lookbehind is factored in, with the information that would
337 have been lost precalculated in the end_shift field for the
340 The fields pos_min and pos_delta are used to store the minimum offset
341 and the delta to the maximum offset at the current point in the pattern.
345 typedef struct scan_data_t {
346 /*I32 len_min; unused */
347 /*I32 len_delta; unused */
351 I32 last_end; /* min value, <0 unless valid. */
354 SV **longest; /* Either &l_fixed, or &l_float. */
355 SV *longest_fixed; /* longest fixed string found in pattern */
356 I32 offset_fixed; /* offset where it starts */
357 I32 *minlen_fixed; /* pointer to the minlen relevant to the string */
358 I32 lookbehind_fixed; /* is the position of the string modfied by LB */
359 SV *longest_float; /* longest floating string found in pattern */
360 I32 offset_float_min; /* earliest point in string it can appear */
361 I32 offset_float_max; /* latest point in string it can appear */
362 I32 *minlen_float; /* pointer to the minlen relevant to the string */
363 I32 lookbehind_float; /* is the position of the string modified by LB */
367 struct regnode_charclass_class *start_class;
371 * Forward declarations for pregcomp()'s friends.
374 static const scan_data_t zero_scan_data =
375 { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 ,0};
377 #define SF_BEFORE_EOL (SF_BEFORE_SEOL|SF_BEFORE_MEOL)
378 #define SF_BEFORE_SEOL 0x0001
379 #define SF_BEFORE_MEOL 0x0002
380 #define SF_FIX_BEFORE_EOL (SF_FIX_BEFORE_SEOL|SF_FIX_BEFORE_MEOL)
381 #define SF_FL_BEFORE_EOL (SF_FL_BEFORE_SEOL|SF_FL_BEFORE_MEOL)
384 # define SF_FIX_SHIFT_EOL (0+2)
385 # define SF_FL_SHIFT_EOL (0+4)
387 # define SF_FIX_SHIFT_EOL (+2)
388 # define SF_FL_SHIFT_EOL (+4)
391 #define SF_FIX_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FIX_SHIFT_EOL)
392 #define SF_FIX_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FIX_SHIFT_EOL)
394 #define SF_FL_BEFORE_SEOL (SF_BEFORE_SEOL << SF_FL_SHIFT_EOL)
395 #define SF_FL_BEFORE_MEOL (SF_BEFORE_MEOL << SF_FL_SHIFT_EOL) /* 0x20 */
396 #define SF_IS_INF 0x0040
397 #define SF_HAS_PAR 0x0080
398 #define SF_IN_PAR 0x0100
399 #define SF_HAS_EVAL 0x0200
400 #define SCF_DO_SUBSTR 0x0400
401 #define SCF_DO_STCLASS_AND 0x0800
402 #define SCF_DO_STCLASS_OR 0x1000
403 #define SCF_DO_STCLASS (SCF_DO_STCLASS_AND|SCF_DO_STCLASS_OR)
404 #define SCF_WHILEM_VISITED_POS 0x2000
406 #define SCF_TRIE_RESTUDY 0x4000 /* Do restudy? */
407 #define SCF_SEEN_ACCEPT 0x8000
408 #define SCF_TRIE_DOING_RESTUDY 0x10000
410 #define UTF cBOOL(RExC_utf8)
412 /* The enums for all these are ordered so things work out correctly */
413 #define LOC (get_regex_charset(RExC_flags) == REGEX_LOCALE_CHARSET)
414 #define DEPENDS_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_DEPENDS_CHARSET)
415 #define UNI_SEMANTICS (get_regex_charset(RExC_flags) == REGEX_UNICODE_CHARSET)
416 #define AT_LEAST_UNI_SEMANTICS (get_regex_charset(RExC_flags) >= REGEX_UNICODE_CHARSET)
417 #define ASCII_RESTRICTED (get_regex_charset(RExC_flags) == REGEX_ASCII_RESTRICTED_CHARSET)
418 #define AT_LEAST_ASCII_RESTRICTED (get_regex_charset(RExC_flags) >= REGEX_ASCII_RESTRICTED_CHARSET)
419 #define ASCII_FOLD_RESTRICTED (get_regex_charset(RExC_flags) == REGEX_ASCII_MORE_RESTRICTED_CHARSET)
421 #define FOLD cBOOL(RExC_flags & RXf_PMf_FOLD)
423 #define OOB_NAMEDCLASS -1
425 /* There is no code point that is out-of-bounds, so this is problematic. But
426 * its only current use is to initialize a variable that is always set before
428 #define OOB_UNICODE 0xDEADBEEF
430 #define CHR_SVLEN(sv) (UTF ? sv_len_utf8(sv) : SvCUR(sv))
431 #define CHR_DIST(a,b) (UTF ? utf8_distance(a,b) : a - b)
434 /* length of regex to show in messages that don't mark a position within */
435 #define RegexLengthToShowInErrorMessages 127
438 * If MARKER[12] are adjusted, be sure to adjust the constants at the top
439 * of t/op/regmesg.t, the tests in t/op/re_tests, and those in
440 * op/pragma/warn/regcomp.
442 #define MARKER1 "<-- HERE" /* marker as it appears in the description */
443 #define MARKER2 " <-- HERE " /* marker as it appears within the regex */
445 #define REPORT_LOCATION " in regex; marked by " MARKER1 " in m/%.*s" MARKER2 "%s/"
448 * Calls SAVEDESTRUCTOR_X if needed, then calls Perl_croak with the given
449 * arg. Show regex, up to a maximum length. If it's too long, chop and add
452 #define _FAIL(code) STMT_START { \
453 const char *ellipses = ""; \
454 IV len = RExC_end - RExC_precomp; \
457 SAVEFREESV(RExC_rx_sv); \
458 if (len > RegexLengthToShowInErrorMessages) { \
459 /* chop 10 shorter than the max, to ensure meaning of "..." */ \
460 len = RegexLengthToShowInErrorMessages - 10; \
466 #define FAIL(msg) _FAIL( \
467 Perl_croak(aTHX_ "%s in regex m/%.*s%s/", \
468 msg, (int)len, RExC_precomp, ellipses))
470 #define FAIL2(msg,arg) _FAIL( \
471 Perl_croak(aTHX_ msg " in regex m/%.*s%s/", \
472 arg, (int)len, RExC_precomp, ellipses))
475 * Simple_vFAIL -- like FAIL, but marks the current location in the scan
477 #define Simple_vFAIL(m) STMT_START { \
478 const IV offset = RExC_parse - RExC_precomp; \
479 Perl_croak(aTHX_ "%s" REPORT_LOCATION, \
480 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
484 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL()
486 #define vFAIL(m) STMT_START { \
488 SAVEFREESV(RExC_rx_sv); \
493 * Like Simple_vFAIL(), but accepts two arguments.
495 #define Simple_vFAIL2(m,a1) STMT_START { \
496 const IV offset = RExC_parse - RExC_precomp; \
497 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, \
498 (int)offset, RExC_precomp, RExC_precomp + offset); \
502 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL2().
504 #define vFAIL2(m,a1) STMT_START { \
506 SAVEFREESV(RExC_rx_sv); \
507 Simple_vFAIL2(m, a1); \
512 * Like Simple_vFAIL(), but accepts three arguments.
514 #define Simple_vFAIL3(m, a1, a2) STMT_START { \
515 const IV offset = RExC_parse - RExC_precomp; \
516 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, \
517 (int)offset, RExC_precomp, RExC_precomp + offset); \
521 * Calls SAVEDESTRUCTOR_X if needed, then Simple_vFAIL3().
523 #define vFAIL3(m,a1,a2) STMT_START { \
525 SAVEFREESV(RExC_rx_sv); \
526 Simple_vFAIL3(m, a1, a2); \
530 * Like Simple_vFAIL(), but accepts four arguments.
532 #define Simple_vFAIL4(m, a1, a2, a3) STMT_START { \
533 const IV offset = RExC_parse - RExC_precomp; \
534 S_re_croak2(aTHX_ m, REPORT_LOCATION, a1, a2, a3, \
535 (int)offset, RExC_precomp, RExC_precomp + offset); \
538 #define vFAIL4(m,a1,a2,a3) STMT_START { \
540 SAVEFREESV(RExC_rx_sv); \
541 Simple_vFAIL4(m, a1, a2, a3); \
544 /* m is not necessarily a "literal string", in this macro */
545 #define reg_warn_non_literal_string(loc, m) STMT_START { \
546 const IV offset = loc - RExC_precomp; \
547 Perl_warner(aTHX_ packWARN(WARN_REGEXP), "%s" REPORT_LOCATION, \
548 m, (int)offset, RExC_precomp, RExC_precomp + offset); \
551 #define ckWARNreg(loc,m) STMT_START { \
552 const IV offset = loc - RExC_precomp; \
553 Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
554 (int)offset, RExC_precomp, RExC_precomp + offset); \
557 #define vWARN_dep(loc, m) STMT_START { \
558 const IV offset = loc - RExC_precomp; \
559 Perl_warner(aTHX_ packWARN(WARN_DEPRECATED), m REPORT_LOCATION, \
560 (int)offset, RExC_precomp, RExC_precomp + offset); \
563 #define ckWARNdep(loc,m) STMT_START { \
564 const IV offset = loc - RExC_precomp; \
565 Perl_ck_warner_d(aTHX_ packWARN(WARN_DEPRECATED), \
567 (int)offset, RExC_precomp, RExC_precomp + offset); \
570 #define ckWARNregdep(loc,m) STMT_START { \
571 const IV offset = loc - RExC_precomp; \
572 Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
574 (int)offset, RExC_precomp, RExC_precomp + offset); \
577 #define ckWARN2regdep(loc,m, a1) STMT_START { \
578 const IV offset = loc - RExC_precomp; \
579 Perl_ck_warner_d(aTHX_ packWARN2(WARN_DEPRECATED, WARN_REGEXP), \
581 a1, (int)offset, RExC_precomp, RExC_precomp + offset); \
584 #define ckWARN2reg(loc, m, a1) STMT_START { \
585 const IV offset = loc - RExC_precomp; \
586 Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
587 a1, (int)offset, RExC_precomp, RExC_precomp + offset); \
590 #define vWARN3(loc, m, a1, a2) STMT_START { \
591 const IV offset = loc - RExC_precomp; \
592 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
593 a1, a2, (int)offset, RExC_precomp, RExC_precomp + offset); \
596 #define ckWARN3reg(loc, m, a1, a2) STMT_START { \
597 const IV offset = loc - RExC_precomp; \
598 Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
599 a1, a2, (int)offset, RExC_precomp, RExC_precomp + offset); \
602 #define vWARN4(loc, m, a1, a2, a3) STMT_START { \
603 const IV offset = loc - RExC_precomp; \
604 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
605 a1, a2, a3, (int)offset, RExC_precomp, RExC_precomp + offset); \
608 #define ckWARN4reg(loc, m, a1, a2, a3) STMT_START { \
609 const IV offset = loc - RExC_precomp; \
610 Perl_ck_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
611 a1, a2, a3, (int)offset, RExC_precomp, RExC_precomp + offset); \
614 #define vWARN5(loc, m, a1, a2, a3, a4) STMT_START { \
615 const IV offset = loc - RExC_precomp; \
616 Perl_warner(aTHX_ packWARN(WARN_REGEXP), m REPORT_LOCATION, \
617 a1, a2, a3, a4, (int)offset, RExC_precomp, RExC_precomp + offset); \
621 /* Allow for side effects in s */
622 #define REGC(c,s) STMT_START { \
623 if (!SIZE_ONLY) *(s) = (c); else (void)(s); \
626 /* Macros for recording node offsets. 20001227 mjd@plover.com
627 * Nodes are numbered 1, 2, 3, 4. Node #n's position is recorded in
628 * element 2*n-1 of the array. Element #2n holds the byte length node #n.
629 * Element 0 holds the number n.
630 * Position is 1 indexed.
632 #ifndef RE_TRACK_PATTERN_OFFSETS
633 #define Set_Node_Offset_To_R(node,byte)
634 #define Set_Node_Offset(node,byte)
635 #define Set_Cur_Node_Offset
636 #define Set_Node_Length_To_R(node,len)
637 #define Set_Node_Length(node,len)
638 #define Set_Node_Cur_Length(node,start)
639 #define Node_Offset(n)
640 #define Node_Length(n)
641 #define Set_Node_Offset_Length(node,offset,len)
642 #define ProgLen(ri) ri->u.proglen
643 #define SetProgLen(ri,x) ri->u.proglen = x
645 #define ProgLen(ri) ri->u.offsets[0]
646 #define SetProgLen(ri,x) ri->u.offsets[0] = x
647 #define Set_Node_Offset_To_R(node,byte) STMT_START { \
649 MJD_OFFSET_DEBUG(("** (%d) offset of node %d is %d.\n", \
650 __LINE__, (int)(node), (int)(byte))); \
652 Perl_croak(aTHX_ "value of node is %d in Offset macro", (int)(node)); \
654 RExC_offsets[2*(node)-1] = (byte); \
659 #define Set_Node_Offset(node,byte) \
660 Set_Node_Offset_To_R((node)-RExC_emit_start, (byte)-RExC_start)
661 #define Set_Cur_Node_Offset Set_Node_Offset(RExC_emit, RExC_parse)
663 #define Set_Node_Length_To_R(node,len) STMT_START { \
665 MJD_OFFSET_DEBUG(("** (%d) size of node %d is %d.\n", \
666 __LINE__, (int)(node), (int)(len))); \
668 Perl_croak(aTHX_ "value of node is %d in Length macro", (int)(node)); \
670 RExC_offsets[2*(node)] = (len); \
675 #define Set_Node_Length(node,len) \
676 Set_Node_Length_To_R((node)-RExC_emit_start, len)
677 #define Set_Node_Cur_Length(node, start) \
678 Set_Node_Length(node, RExC_parse - start)
680 /* Get offsets and lengths */
681 #define Node_Offset(n) (RExC_offsets[2*((n)-RExC_emit_start)-1])
682 #define Node_Length(n) (RExC_offsets[2*((n)-RExC_emit_start)])
684 #define Set_Node_Offset_Length(node,offset,len) STMT_START { \
685 Set_Node_Offset_To_R((node)-RExC_emit_start, (offset)); \
686 Set_Node_Length_To_R((node)-RExC_emit_start, (len)); \
690 #if PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS
691 #define EXPERIMENTAL_INPLACESCAN
692 #endif /*PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS*/
694 #define DEBUG_STUDYDATA(str,data,depth) \
695 DEBUG_OPTIMISE_MORE_r(if(data){ \
696 PerlIO_printf(Perl_debug_log, \
697 "%*s" str "Pos:%"IVdf"/%"IVdf \
698 " Flags: 0x%"UVXf" Whilem_c: %"IVdf" Lcp: %"IVdf" %s", \
699 (int)(depth)*2, "", \
700 (IV)((data)->pos_min), \
701 (IV)((data)->pos_delta), \
702 (UV)((data)->flags), \
703 (IV)((data)->whilem_c), \
704 (IV)((data)->last_closep ? *((data)->last_closep) : -1), \
705 is_inf ? "INF " : "" \
707 if ((data)->last_found) \
708 PerlIO_printf(Perl_debug_log, \
709 "Last:'%s' %"IVdf":%"IVdf"/%"IVdf" %sFixed:'%s' @ %"IVdf \
710 " %sFloat: '%s' @ %"IVdf"/%"IVdf"", \
711 SvPVX_const((data)->last_found), \
712 (IV)((data)->last_end), \
713 (IV)((data)->last_start_min), \
714 (IV)((data)->last_start_max), \
715 ((data)->longest && \
716 (data)->longest==&((data)->longest_fixed)) ? "*" : "", \
717 SvPVX_const((data)->longest_fixed), \
718 (IV)((data)->offset_fixed), \
719 ((data)->longest && \
720 (data)->longest==&((data)->longest_float)) ? "*" : "", \
721 SvPVX_const((data)->longest_float), \
722 (IV)((data)->offset_float_min), \
723 (IV)((data)->offset_float_max) \
725 PerlIO_printf(Perl_debug_log,"\n"); \
728 /* Mark that we cannot extend a found fixed substring at this point.
729 Update the longest found anchored substring and the longest found
730 floating substrings if needed. */
733 S_scan_commit(pTHX_ const RExC_state_t *pRExC_state, scan_data_t *data, I32 *minlenp, int is_inf)
735 const STRLEN l = CHR_SVLEN(data->last_found);
736 const STRLEN old_l = CHR_SVLEN(*data->longest);
737 GET_RE_DEBUG_FLAGS_DECL;
739 PERL_ARGS_ASSERT_SCAN_COMMIT;
741 if ((l >= old_l) && ((l > old_l) || (data->flags & SF_BEFORE_EOL))) {
742 SvSetMagicSV(*data->longest, data->last_found);
743 if (*data->longest == data->longest_fixed) {
744 data->offset_fixed = l ? data->last_start_min : data->pos_min;
745 if (data->flags & SF_BEFORE_EOL)
747 |= ((data->flags & SF_BEFORE_EOL) << SF_FIX_SHIFT_EOL);
749 data->flags &= ~SF_FIX_BEFORE_EOL;
750 data->minlen_fixed=minlenp;
751 data->lookbehind_fixed=0;
753 else { /* *data->longest == data->longest_float */
754 data->offset_float_min = l ? data->last_start_min : data->pos_min;
755 data->offset_float_max = (l
756 ? data->last_start_max
757 : (data->pos_delta == I32_MAX ? I32_MAX : data->pos_min + data->pos_delta));
758 if (is_inf || (U32)data->offset_float_max > (U32)I32_MAX)
759 data->offset_float_max = I32_MAX;
760 if (data->flags & SF_BEFORE_EOL)
762 |= ((data->flags & SF_BEFORE_EOL) << SF_FL_SHIFT_EOL);
764 data->flags &= ~SF_FL_BEFORE_EOL;
765 data->minlen_float=minlenp;
766 data->lookbehind_float=0;
769 SvCUR_set(data->last_found, 0);
771 SV * const sv = data->last_found;
772 if (SvUTF8(sv) && SvMAGICAL(sv)) {
773 MAGIC * const mg = mg_find(sv, PERL_MAGIC_utf8);
779 data->flags &= ~SF_BEFORE_EOL;
780 DEBUG_STUDYDATA("commit: ",data,0);
783 /* These macros set, clear and test whether the synthetic start class ('ssc',
784 * given by the parameter) matches an empty string (EOS). This uses the
785 * 'next_off' field in the node, to save a bit in the flags field. The ssc
786 * stands alone, so there is never a next_off, so this field is otherwise
787 * unused. The EOS information is used only for compilation, but theoretically
788 * it could be passed on to the execution code. This could be used to store
789 * more than one bit of information, but only this one is currently used. */
790 #define SET_SSC_EOS(node) STMT_START { (node)->next_off = TRUE; } STMT_END
791 #define CLEAR_SSC_EOS(node) STMT_START { (node)->next_off = FALSE; } STMT_END
792 #define TEST_SSC_EOS(node) cBOOL((node)->next_off)
794 /* Can match anything (initialization) */
796 S_cl_anything(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
798 PERL_ARGS_ASSERT_CL_ANYTHING;
800 ANYOF_BITMAP_SETALL(cl);
801 cl->flags = ANYOF_UNICODE_ALL;
804 /* If any portion of the regex is to operate under locale rules,
805 * initialization includes it. The reason this isn't done for all regexes
806 * is that the optimizer was written under the assumption that locale was
807 * all-or-nothing. Given the complexity and lack of documentation in the
808 * optimizer, and that there are inadequate test cases for locale, so many
809 * parts of it may not work properly, it is safest to avoid locale unless
811 if (RExC_contains_locale) {
812 ANYOF_CLASS_SETALL(cl); /* /l uses class */
813 cl->flags |= ANYOF_LOCALE|ANYOF_CLASS|ANYOF_LOC_FOLD;
816 ANYOF_CLASS_ZERO(cl); /* Only /l uses class now */
820 /* Can match anything (initialization) */
822 S_cl_is_anything(const struct regnode_charclass_class *cl)
826 PERL_ARGS_ASSERT_CL_IS_ANYTHING;
828 for (value = 0; value < ANYOF_MAX; value += 2)
829 if (ANYOF_CLASS_TEST(cl, value) && ANYOF_CLASS_TEST(cl, value + 1))
831 if (!(cl->flags & ANYOF_UNICODE_ALL))
833 if (!ANYOF_BITMAP_TESTALLSET((const void*)cl))
838 /* Can match anything (initialization) */
840 S_cl_init(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl)
842 PERL_ARGS_ASSERT_CL_INIT;
844 Zero(cl, 1, struct regnode_charclass_class);
846 cl_anything(pRExC_state, cl);
847 ARG_SET(cl, ANYOF_NONBITMAP_EMPTY);
850 /* These two functions currently do the exact same thing */
851 #define cl_init_zero S_cl_init
853 /* 'AND' a given class with another one. Can create false positives. 'cl'
854 * should not be inverted. 'and_with->flags & ANYOF_CLASS' should be 0 if
855 * 'and_with' is a regnode_charclass instead of a regnode_charclass_class. */
857 S_cl_and(struct regnode_charclass_class *cl,
858 const struct regnode_charclass_class *and_with)
860 PERL_ARGS_ASSERT_CL_AND;
862 assert(PL_regkind[and_with->type] == ANYOF);
864 /* I (khw) am not sure all these restrictions are necessary XXX */
865 if (!(ANYOF_CLASS_TEST_ANY_SET(and_with))
866 && !(ANYOF_CLASS_TEST_ANY_SET(cl))
867 && (and_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
868 && !(and_with->flags & ANYOF_LOC_FOLD)
869 && !(cl->flags & ANYOF_LOC_FOLD)) {
872 if (and_with->flags & ANYOF_INVERT)
873 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
874 cl->bitmap[i] &= ~and_with->bitmap[i];
876 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
877 cl->bitmap[i] &= and_with->bitmap[i];
878 } /* XXXX: logic is complicated otherwise, leave it along for a moment. */
880 if (and_with->flags & ANYOF_INVERT) {
882 /* Here, the and'ed node is inverted. Get the AND of the flags that
883 * aren't affected by the inversion. Those that are affected are
884 * handled individually below */
885 U8 affected_flags = cl->flags & ~INVERSION_UNAFFECTED_FLAGS;
886 cl->flags &= (and_with->flags & INVERSION_UNAFFECTED_FLAGS);
887 cl->flags |= affected_flags;
889 /* We currently don't know how to deal with things that aren't in the
890 * bitmap, but we know that the intersection is no greater than what
891 * is already in cl, so let there be false positives that get sorted
892 * out after the synthetic start class succeeds, and the node is
893 * matched for real. */
895 /* The inversion of these two flags indicate that the resulting
896 * intersection doesn't have them */
897 if (and_with->flags & ANYOF_UNICODE_ALL) {
898 cl->flags &= ~ANYOF_UNICODE_ALL;
900 if (and_with->flags & ANYOF_NON_UTF8_LATIN1_ALL) {
901 cl->flags &= ~ANYOF_NON_UTF8_LATIN1_ALL;
904 else { /* and'd node is not inverted */
905 U8 outside_bitmap_but_not_utf8; /* Temp variable */
907 if (! ANYOF_NONBITMAP(and_with)) {
909 /* Here 'and_with' doesn't match anything outside the bitmap
910 * (except possibly ANYOF_UNICODE_ALL), which means the
911 * intersection can't either, except for ANYOF_UNICODE_ALL, in
912 * which case we don't know what the intersection is, but it's no
913 * greater than what cl already has, so can just leave it alone,
914 * with possible false positives */
915 if (! (and_with->flags & ANYOF_UNICODE_ALL)) {
916 ARG_SET(cl, ANYOF_NONBITMAP_EMPTY);
917 cl->flags &= ~ANYOF_NONBITMAP_NON_UTF8;
920 else if (! ANYOF_NONBITMAP(cl)) {
922 /* Here, 'and_with' does match something outside the bitmap, and cl
923 * doesn't have a list of things to match outside the bitmap. If
924 * cl can match all code points above 255, the intersection will
925 * be those above-255 code points that 'and_with' matches. If cl
926 * can't match all Unicode code points, it means that it can't
927 * match anything outside the bitmap (since the 'if' that got us
928 * into this block tested for that), so we leave the bitmap empty.
930 if (cl->flags & ANYOF_UNICODE_ALL) {
931 ARG_SET(cl, ARG(and_with));
933 /* and_with's ARG may match things that don't require UTF8.
934 * And now cl's will too, in spite of this being an 'and'. See
935 * the comments below about the kludge */
936 cl->flags |= and_with->flags & ANYOF_NONBITMAP_NON_UTF8;
940 /* Here, both 'and_with' and cl match something outside the
941 * bitmap. Currently we do not do the intersection, so just match
942 * whatever cl had at the beginning. */
946 /* Take the intersection of the two sets of flags. However, the
947 * ANYOF_NONBITMAP_NON_UTF8 flag is treated as an 'or'. This is a
948 * kludge around the fact that this flag is not treated like the others
949 * which are initialized in cl_anything(). The way the optimizer works
950 * is that the synthetic start class (SSC) is initialized to match
951 * anything, and then the first time a real node is encountered, its
952 * values are AND'd with the SSC's with the result being the values of
953 * the real node. However, there are paths through the optimizer where
954 * the AND never gets called, so those initialized bits are set
955 * inappropriately, which is not usually a big deal, as they just cause
956 * false positives in the SSC, which will just mean a probably
957 * imperceptible slow down in execution. However this bit has a
958 * higher false positive consequence in that it can cause utf8.pm,
959 * utf8_heavy.pl ... to be loaded when not necessary, which is a much
960 * bigger slowdown and also causes significant extra memory to be used.
961 * In order to prevent this, the code now takes a different tack. The
962 * bit isn't set unless some part of the regular expression needs it,
963 * but once set it won't get cleared. This means that these extra
964 * modules won't get loaded unless there was some path through the
965 * pattern that would have required them anyway, and so any false
966 * positives that occur by not ANDing them out when they could be
967 * aren't as severe as they would be if we treated this bit like all
969 outside_bitmap_but_not_utf8 = (cl->flags | and_with->flags)
970 & ANYOF_NONBITMAP_NON_UTF8;
971 cl->flags &= and_with->flags;
972 cl->flags |= outside_bitmap_but_not_utf8;
976 /* 'OR' a given class with another one. Can create false positives. 'cl'
977 * should not be inverted. 'or_with->flags & ANYOF_CLASS' should be 0 if
978 * 'or_with' is a regnode_charclass instead of a regnode_charclass_class. */
980 S_cl_or(const RExC_state_t *pRExC_state, struct regnode_charclass_class *cl, const struct regnode_charclass_class *or_with)
982 PERL_ARGS_ASSERT_CL_OR;
984 if (or_with->flags & ANYOF_INVERT) {
986 /* Here, the or'd node is to be inverted. This means we take the
987 * complement of everything not in the bitmap, but currently we don't
988 * know what that is, so give up and match anything */
989 if (ANYOF_NONBITMAP(or_with)) {
990 cl_anything(pRExC_state, cl);
993 * (B1 | CL1) | (!B2 & !CL2) = (B1 | !B2 & !CL2) | (CL1 | (!B2 & !CL2))
994 * <= (B1 | !B2) | (CL1 | !CL2)
995 * which is wasteful if CL2 is small, but we ignore CL2:
996 * (B1 | CL1) | (!B2 & !CL2) <= (B1 | CL1) | !B2 = (B1 | !B2) | CL1
997 * XXXX Can we handle case-fold? Unclear:
998 * (OK1(i) | OK1(i')) | !(OK1(i) | OK1(i')) =
999 * (OK1(i) | OK1(i')) | (!OK1(i) & !OK1(i'))
1001 else if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
1002 && !(or_with->flags & ANYOF_LOC_FOLD)
1003 && !(cl->flags & ANYOF_LOC_FOLD) ) {
1006 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
1007 cl->bitmap[i] |= ~or_with->bitmap[i];
1008 } /* XXXX: logic is complicated otherwise */
1010 cl_anything(pRExC_state, cl);
1013 /* And, we can just take the union of the flags that aren't affected
1014 * by the inversion */
1015 cl->flags |= or_with->flags & INVERSION_UNAFFECTED_FLAGS;
1017 /* For the remaining flags:
1018 ANYOF_UNICODE_ALL and inverted means to not match anything above
1019 255, which means that the union with cl should just be
1020 what cl has in it, so can ignore this flag
1021 ANYOF_NON_UTF8_LATIN1_ALL and inverted means if not utf8 and ord
1022 is 127-255 to match them, but then invert that, so the
1023 union with cl should just be what cl has in it, so can
1026 } else { /* 'or_with' is not inverted */
1027 /* (B1 | CL1) | (B2 | CL2) = (B1 | B2) | (CL1 | CL2)) */
1028 if ( (or_with->flags & ANYOF_LOCALE) == (cl->flags & ANYOF_LOCALE)
1029 && (!(or_with->flags & ANYOF_LOC_FOLD)
1030 || (cl->flags & ANYOF_LOC_FOLD)) ) {
1033 /* OR char bitmap and class bitmap separately */
1034 for (i = 0; i < ANYOF_BITMAP_SIZE; i++)
1035 cl->bitmap[i] |= or_with->bitmap[i];
1036 if (or_with->flags & ANYOF_CLASS) {
1037 ANYOF_CLASS_OR(or_with, cl);
1040 else { /* XXXX: logic is complicated, leave it along for a moment. */
1041 cl_anything(pRExC_state, cl);
1044 if (ANYOF_NONBITMAP(or_with)) {
1046 /* Use the added node's outside-the-bit-map match if there isn't a
1047 * conflict. If there is a conflict (both nodes match something
1048 * outside the bitmap, but what they match outside is not the same
1049 * pointer, and hence not easily compared until XXX we extend
1050 * inversion lists this far), give up and allow the start class to
1051 * match everything outside the bitmap. If that stuff is all above
1052 * 255, can just set UNICODE_ALL, otherwise caould be anything. */
1053 if (! ANYOF_NONBITMAP(cl)) {
1054 ARG_SET(cl, ARG(or_with));
1056 else if (ARG(cl) != ARG(or_with)) {
1058 if ((or_with->flags & ANYOF_NONBITMAP_NON_UTF8)) {
1059 cl_anything(pRExC_state, cl);
1062 cl->flags |= ANYOF_UNICODE_ALL;
1067 /* Take the union */
1068 cl->flags |= or_with->flags;
1072 #define TRIE_LIST_ITEM(state,idx) (trie->states[state].trans.list)[ idx ]
1073 #define TRIE_LIST_CUR(state) ( TRIE_LIST_ITEM( state, 0 ).forid )
1074 #define TRIE_LIST_LEN(state) ( TRIE_LIST_ITEM( state, 0 ).newstate )
1075 #define TRIE_LIST_USED(idx) ( trie->states[state].trans.list ? (TRIE_LIST_CUR( idx ) - 1) : 0 )
1080 dump_trie(trie,widecharmap,revcharmap)
1081 dump_trie_interim_list(trie,widecharmap,revcharmap,next_alloc)
1082 dump_trie_interim_table(trie,widecharmap,revcharmap,next_alloc)
1084 These routines dump out a trie in a somewhat readable format.
1085 The _interim_ variants are used for debugging the interim
1086 tables that are used to generate the final compressed
1087 representation which is what dump_trie expects.
1089 Part of the reason for their existence is to provide a form
1090 of documentation as to how the different representations function.
1095 Dumps the final compressed table form of the trie to Perl_debug_log.
1096 Used for debugging make_trie().
1100 S_dump_trie(pTHX_ const struct _reg_trie_data *trie, HV *widecharmap,
1101 AV *revcharmap, U32 depth)
1104 SV *sv=sv_newmortal();
1105 int colwidth= widecharmap ? 6 : 4;
1107 GET_RE_DEBUG_FLAGS_DECL;
1109 PERL_ARGS_ASSERT_DUMP_TRIE;
1111 PerlIO_printf( Perl_debug_log, "%*sChar : %-6s%-6s%-4s ",
1112 (int)depth * 2 + 2,"",
1113 "Match","Base","Ofs" );
1115 for( state = 0 ; state < trie->uniquecharcount ; state++ ) {
1116 SV ** const tmp = av_fetch( revcharmap, state, 0);
1118 PerlIO_printf( Perl_debug_log, "%*s",
1120 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
1121 PL_colors[0], PL_colors[1],
1122 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
1123 PERL_PV_ESCAPE_FIRSTCHAR
1128 PerlIO_printf( Perl_debug_log, "\n%*sState|-----------------------",
1129 (int)depth * 2 + 2,"");
1131 for( state = 0 ; state < trie->uniquecharcount ; state++ )
1132 PerlIO_printf( Perl_debug_log, "%.*s", colwidth, "--------");
1133 PerlIO_printf( Perl_debug_log, "\n");
1135 for( state = 1 ; state < trie->statecount ; state++ ) {
1136 const U32 base = trie->states[ state ].trans.base;
1138 PerlIO_printf( Perl_debug_log, "%*s#%4"UVXf"|", (int)depth * 2 + 2,"", (UV)state);
1140 if ( trie->states[ state ].wordnum ) {
1141 PerlIO_printf( Perl_debug_log, " W%4X", trie->states[ state ].wordnum );
1143 PerlIO_printf( Perl_debug_log, "%6s", "" );
1146 PerlIO_printf( Perl_debug_log, " @%4"UVXf" ", (UV)base );
1151 while( ( base + ofs < trie->uniquecharcount ) ||
1152 ( base + ofs - trie->uniquecharcount < trie->lasttrans
1153 && trie->trans[ base + ofs - trie->uniquecharcount ].check != state))
1156 PerlIO_printf( Perl_debug_log, "+%2"UVXf"[ ", (UV)ofs);
1158 for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) {
1159 if ( ( base + ofs >= trie->uniquecharcount ) &&
1160 ( base + ofs - trie->uniquecharcount < trie->lasttrans ) &&
1161 trie->trans[ base + ofs - trie->uniquecharcount ].check == state )
1163 PerlIO_printf( Perl_debug_log, "%*"UVXf,
1165 (UV)trie->trans[ base + ofs - trie->uniquecharcount ].next );
1167 PerlIO_printf( Perl_debug_log, "%*s",colwidth," ." );
1171 PerlIO_printf( Perl_debug_log, "]");
1174 PerlIO_printf( Perl_debug_log, "\n" );
1176 PerlIO_printf(Perl_debug_log, "%*sword_info N:(prev,len)=", (int)depth*2, "");
1177 for (word=1; word <= trie->wordcount; word++) {
1178 PerlIO_printf(Perl_debug_log, " %d:(%d,%d)",
1179 (int)word, (int)(trie->wordinfo[word].prev),
1180 (int)(trie->wordinfo[word].len));
1182 PerlIO_printf(Perl_debug_log, "\n" );
1185 Dumps a fully constructed but uncompressed trie in list form.
1186 List tries normally only are used for construction when the number of
1187 possible chars (trie->uniquecharcount) is very high.
1188 Used for debugging make_trie().
1191 S_dump_trie_interim_list(pTHX_ const struct _reg_trie_data *trie,
1192 HV *widecharmap, AV *revcharmap, U32 next_alloc,
1196 SV *sv=sv_newmortal();
1197 int colwidth= widecharmap ? 6 : 4;
1198 GET_RE_DEBUG_FLAGS_DECL;
1200 PERL_ARGS_ASSERT_DUMP_TRIE_INTERIM_LIST;
1202 /* print out the table precompression. */
1203 PerlIO_printf( Perl_debug_log, "%*sState :Word | Transition Data\n%*s%s",
1204 (int)depth * 2 + 2,"", (int)depth * 2 + 2,"",
1205 "------:-----+-----------------\n" );
1207 for( state=1 ; state < next_alloc ; state ++ ) {
1210 PerlIO_printf( Perl_debug_log, "%*s %4"UVXf" :",
1211 (int)depth * 2 + 2,"", (UV)state );
1212 if ( ! trie->states[ state ].wordnum ) {
1213 PerlIO_printf( Perl_debug_log, "%5s| ","");
1215 PerlIO_printf( Perl_debug_log, "W%4x| ",
1216 trie->states[ state ].wordnum
1219 for( charid = 1 ; charid <= TRIE_LIST_USED( state ) ; charid++ ) {
1220 SV ** const tmp = av_fetch( revcharmap, TRIE_LIST_ITEM(state,charid).forid, 0);
1222 PerlIO_printf( Perl_debug_log, "%*s:%3X=%4"UVXf" | ",
1224 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
1225 PL_colors[0], PL_colors[1],
1226 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
1227 PERL_PV_ESCAPE_FIRSTCHAR
1229 TRIE_LIST_ITEM(state,charid).forid,
1230 (UV)TRIE_LIST_ITEM(state,charid).newstate
1233 PerlIO_printf(Perl_debug_log, "\n%*s| ",
1234 (int)((depth * 2) + 14), "");
1237 PerlIO_printf( Perl_debug_log, "\n");
1242 Dumps a fully constructed but uncompressed trie in table form.
1243 This is the normal DFA style state transition table, with a few
1244 twists to facilitate compression later.
1245 Used for debugging make_trie().
1248 S_dump_trie_interim_table(pTHX_ const struct _reg_trie_data *trie,
1249 HV *widecharmap, AV *revcharmap, U32 next_alloc,
1254 SV *sv=sv_newmortal();
1255 int colwidth= widecharmap ? 6 : 4;
1256 GET_RE_DEBUG_FLAGS_DECL;
1258 PERL_ARGS_ASSERT_DUMP_TRIE_INTERIM_TABLE;
1261 print out the table precompression so that we can do a visual check
1262 that they are identical.
1265 PerlIO_printf( Perl_debug_log, "%*sChar : ",(int)depth * 2 + 2,"" );
1267 for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) {
1268 SV ** const tmp = av_fetch( revcharmap, charid, 0);
1270 PerlIO_printf( Perl_debug_log, "%*s",
1272 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), colwidth,
1273 PL_colors[0], PL_colors[1],
1274 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
1275 PERL_PV_ESCAPE_FIRSTCHAR
1281 PerlIO_printf( Perl_debug_log, "\n%*sState+-",(int)depth * 2 + 2,"" );
1283 for( charid=0 ; charid < trie->uniquecharcount ; charid++ ) {
1284 PerlIO_printf( Perl_debug_log, "%.*s", colwidth,"--------");
1287 PerlIO_printf( Perl_debug_log, "\n" );
1289 for( state=1 ; state < next_alloc ; state += trie->uniquecharcount ) {
1291 PerlIO_printf( Perl_debug_log, "%*s%4"UVXf" : ",
1292 (int)depth * 2 + 2,"",
1293 (UV)TRIE_NODENUM( state ) );
1295 for( charid = 0 ; charid < trie->uniquecharcount ; charid++ ) {
1296 UV v=(UV)SAFE_TRIE_NODENUM( trie->trans[ state + charid ].next );
1298 PerlIO_printf( Perl_debug_log, "%*"UVXf, colwidth, v );
1300 PerlIO_printf( Perl_debug_log, "%*s", colwidth, "." );
1302 if ( ! trie->states[ TRIE_NODENUM( state ) ].wordnum ) {
1303 PerlIO_printf( Perl_debug_log, " (%4"UVXf")\n", (UV)trie->trans[ state ].check );
1305 PerlIO_printf( Perl_debug_log, " (%4"UVXf") W%4X\n", (UV)trie->trans[ state ].check,
1306 trie->states[ TRIE_NODENUM( state ) ].wordnum );
1314 /* make_trie(startbranch,first,last,tail,word_count,flags,depth)
1315 startbranch: the first branch in the whole branch sequence
1316 first : start branch of sequence of branch-exact nodes.
1317 May be the same as startbranch
1318 last : Thing following the last branch.
1319 May be the same as tail.
1320 tail : item following the branch sequence
1321 count : words in the sequence
1322 flags : currently the OP() type we will be building one of /EXACT(|F|Fl)/
1323 depth : indent depth
1325 Inplace optimizes a sequence of 2 or more Branch-Exact nodes into a TRIE node.
1327 A trie is an N'ary tree where the branches are determined by digital
1328 decomposition of the key. IE, at the root node you look up the 1st character and
1329 follow that branch repeat until you find the end of the branches. Nodes can be
1330 marked as "accepting" meaning they represent a complete word. Eg:
1334 would convert into the following structure. Numbers represent states, letters
1335 following numbers represent valid transitions on the letter from that state, if
1336 the number is in square brackets it represents an accepting state, otherwise it
1337 will be in parenthesis.
1339 +-h->+-e->[3]-+-r->(8)-+-s->[9]
1343 (1) +-i->(6)-+-s->[7]
1345 +-s->(3)-+-h->(4)-+-e->[5]
1347 Accept Word Mapping: 3=>1 (he),5=>2 (she), 7=>3 (his), 9=>4 (hers)
1349 This shows that when matching against the string 'hers' we will begin at state 1
1350 read 'h' and move to state 2, read 'e' and move to state 3 which is accepting,
1351 then read 'r' and go to state 8 followed by 's' which takes us to state 9 which
1352 is also accepting. Thus we know that we can match both 'he' and 'hers' with a
1353 single traverse. We store a mapping from accepting to state to which word was
1354 matched, and then when we have multiple possibilities we try to complete the
1355 rest of the regex in the order in which they occured in the alternation.
1357 The only prior NFA like behaviour that would be changed by the TRIE support is
1358 the silent ignoring of duplicate alternations which are of the form:
1360 / (DUPE|DUPE) X? (?{ ... }) Y /x
1362 Thus EVAL blocks following a trie may be called a different number of times with
1363 and without the optimisation. With the optimisations dupes will be silently
1364 ignored. This inconsistent behaviour of EVAL type nodes is well established as
1365 the following demonstrates:
1367 'words'=~/(word|word|word)(?{ print $1 })[xyz]/
1369 which prints out 'word' three times, but
1371 'words'=~/(word|word|word)(?{ print $1 })S/
1373 which doesnt print it out at all. This is due to other optimisations kicking in.
1375 Example of what happens on a structural level:
1377 The regexp /(ac|ad|ab)+/ will produce the following debug output:
1379 1: CURLYM[1] {1,32767}(18)
1390 This would be optimizable with startbranch=5, first=5, last=16, tail=16
1391 and should turn into:
1393 1: CURLYM[1] {1,32767}(18)
1395 [Words:3 Chars Stored:6 Unique Chars:4 States:5 NCP:1]
1403 Cases where tail != last would be like /(?foo|bar)baz/:
1413 which would be optimizable with startbranch=1, first=1, last=7, tail=8
1414 and would end up looking like:
1417 [Words:2 Chars Stored:6 Unique Chars:5 States:7 NCP:1]
1424 d = uvuni_to_utf8_flags(d, uv, 0);
1426 is the recommended Unicode-aware way of saying
1431 #define TRIE_STORE_REVCHAR(val) \
1434 SV *zlopp = newSV(7); /* XXX: optimize me */ \
1435 unsigned char *flrbbbbb = (unsigned char *) SvPVX(zlopp); \
1436 unsigned const char *const kapow = uvuni_to_utf8(flrbbbbb, val); \
1437 SvCUR_set(zlopp, kapow - flrbbbbb); \
1440 av_push(revcharmap, zlopp); \
1442 char ooooff = (char)val; \
1443 av_push(revcharmap, newSVpvn(&ooooff, 1)); \
1447 #define TRIE_READ_CHAR STMT_START { \
1450 /* if it is UTF then it is either already folded, or does not need folding */ \
1451 uvc = utf8n_to_uvuni( (const U8*) uc, UTF8_MAXLEN, &len, uniflags); \
1453 else if (folder == PL_fold_latin1) { \
1454 /* if we use this folder we have to obey unicode rules on latin-1 data */ \
1455 if ( foldlen > 0 ) { \
1456 uvc = utf8n_to_uvuni( (const U8*) scan, UTF8_MAXLEN, &len, uniflags ); \
1462 uvc = _to_fold_latin1( (U8) *uc, foldbuf, &foldlen, FOLD_FLAGS_FULL); \
1463 skiplen = UNISKIP(uvc); \
1464 foldlen -= skiplen; \
1465 scan = foldbuf + skiplen; \
1468 /* raw data, will be folded later if needed */ \
1476 #define TRIE_LIST_PUSH(state,fid,ns) STMT_START { \
1477 if ( TRIE_LIST_CUR( state ) >=TRIE_LIST_LEN( state ) ) { \
1478 U32 ging = TRIE_LIST_LEN( state ) *= 2; \
1479 Renew( trie->states[ state ].trans.list, ging, reg_trie_trans_le ); \
1481 TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).forid = fid; \
1482 TRIE_LIST_ITEM( state, TRIE_LIST_CUR( state ) ).newstate = ns; \
1483 TRIE_LIST_CUR( state )++; \
1486 #define TRIE_LIST_NEW(state) STMT_START { \
1487 Newxz( trie->states[ state ].trans.list, \
1488 4, reg_trie_trans_le ); \
1489 TRIE_LIST_CUR( state ) = 1; \
1490 TRIE_LIST_LEN( state ) = 4; \
1493 #define TRIE_HANDLE_WORD(state) STMT_START { \
1494 U16 dupe= trie->states[ state ].wordnum; \
1495 regnode * const noper_next = regnext( noper ); \
1498 /* store the word for dumping */ \
1500 if (OP(noper) != NOTHING) \
1501 tmp = newSVpvn_utf8(STRING(noper), STR_LEN(noper), UTF); \
1503 tmp = newSVpvn_utf8( "", 0, UTF ); \
1504 av_push( trie_words, tmp ); \
1508 trie->wordinfo[curword].prev = 0; \
1509 trie->wordinfo[curword].len = wordlen; \
1510 trie->wordinfo[curword].accept = state; \
1512 if ( noper_next < tail ) { \
1514 trie->jump = (U16 *) PerlMemShared_calloc( word_count + 1, sizeof(U16) ); \
1515 trie->jump[curword] = (U16)(noper_next - convert); \
1517 jumper = noper_next; \
1519 nextbranch= regnext(cur); \
1523 /* It's a dupe. Pre-insert into the wordinfo[].prev */\
1524 /* chain, so that when the bits of chain are later */\
1525 /* linked together, the dups appear in the chain */\
1526 trie->wordinfo[curword].prev = trie->wordinfo[dupe].prev; \
1527 trie->wordinfo[dupe].prev = curword; \
1529 /* we haven't inserted this word yet. */ \
1530 trie->states[ state ].wordnum = curword; \
1535 #define TRIE_TRANS_STATE(state,base,ucharcount,charid,special) \
1536 ( ( base + charid >= ucharcount \
1537 && base + charid < ubound \
1538 && state == trie->trans[ base - ucharcount + charid ].check \
1539 && trie->trans[ base - ucharcount + charid ].next ) \
1540 ? trie->trans[ base - ucharcount + charid ].next \
1541 : ( state==1 ? special : 0 ) \
1545 #define MADE_JUMP_TRIE 2
1546 #define MADE_EXACT_TRIE 4
1549 S_make_trie(pTHX_ RExC_state_t *pRExC_state, regnode *startbranch, regnode *first, regnode *last, regnode *tail, U32 word_count, U32 flags, U32 depth)
1552 /* first pass, loop through and scan words */
1553 reg_trie_data *trie;
1554 HV *widecharmap = NULL;
1555 AV *revcharmap = newAV();
1557 const U32 uniflags = UTF8_ALLOW_DEFAULT;
1562 regnode *jumper = NULL;
1563 regnode *nextbranch = NULL;
1564 regnode *convert = NULL;
1565 U32 *prev_states; /* temp array mapping each state to previous one */
1566 /* we just use folder as a flag in utf8 */
1567 const U8 * folder = NULL;
1570 const U32 data_slot = add_data( pRExC_state, 4, "tuuu" );
1571 AV *trie_words = NULL;
1572 /* along with revcharmap, this only used during construction but both are
1573 * useful during debugging so we store them in the struct when debugging.
1576 const U32 data_slot = add_data( pRExC_state, 2, "tu" );
1577 STRLEN trie_charcount=0;
1579 SV *re_trie_maxbuff;
1580 GET_RE_DEBUG_FLAGS_DECL;
1582 PERL_ARGS_ASSERT_MAKE_TRIE;
1584 PERL_UNUSED_ARG(depth);
1591 case EXACTFU_TRICKYFOLD:
1592 case EXACTFU: folder = PL_fold_latin1; break;
1593 case EXACTF: folder = PL_fold; break;
1594 case EXACTFL: folder = PL_fold_locale; break;
1595 default: Perl_croak( aTHX_ "panic! In trie construction, unknown node type %u %s", (unsigned) flags, PL_reg_name[flags] );
1598 trie = (reg_trie_data *) PerlMemShared_calloc( 1, sizeof(reg_trie_data) );
1600 trie->startstate = 1;
1601 trie->wordcount = word_count;
1602 RExC_rxi->data->data[ data_slot ] = (void*)trie;
1603 trie->charmap = (U16 *) PerlMemShared_calloc( 256, sizeof(U16) );
1605 trie->bitmap = (char *) PerlMemShared_calloc( ANYOF_BITMAP_SIZE, 1 );
1606 trie->wordinfo = (reg_trie_wordinfo *) PerlMemShared_calloc(
1607 trie->wordcount+1, sizeof(reg_trie_wordinfo));
1610 trie_words = newAV();
1613 re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1);
1614 if (!SvIOK(re_trie_maxbuff)) {
1615 sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT);
1617 DEBUG_TRIE_COMPILE_r({
1618 PerlIO_printf( Perl_debug_log,
1619 "%*smake_trie start==%d, first==%d, last==%d, tail==%d depth=%d\n",
1620 (int)depth * 2 + 2, "",
1621 REG_NODE_NUM(startbranch),REG_NODE_NUM(first),
1622 REG_NODE_NUM(last), REG_NODE_NUM(tail),
1626 /* Find the node we are going to overwrite */
1627 if ( first == startbranch && OP( last ) != BRANCH ) {
1628 /* whole branch chain */
1631 /* branch sub-chain */
1632 convert = NEXTOPER( first );
1635 /* -- First loop and Setup --
1637 We first traverse the branches and scan each word to determine if it
1638 contains widechars, and how many unique chars there are, this is
1639 important as we have to build a table with at least as many columns as we
1642 We use an array of integers to represent the character codes 0..255
1643 (trie->charmap) and we use a an HV* to store Unicode characters. We use the
1644 native representation of the character value as the key and IV's for the
1647 *TODO* If we keep track of how many times each character is used we can
1648 remap the columns so that the table compression later on is more
1649 efficient in terms of memory by ensuring the most common value is in the
1650 middle and the least common are on the outside. IMO this would be better
1651 than a most to least common mapping as theres a decent chance the most
1652 common letter will share a node with the least common, meaning the node
1653 will not be compressible. With a middle is most common approach the worst
1654 case is when we have the least common nodes twice.
1658 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1659 regnode *noper = NEXTOPER( cur );
1660 const U8 *uc = (U8*)STRING( noper );
1661 const U8 *e = uc + STR_LEN( noper );
1663 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1665 const U8 *scan = (U8*)NULL;
1666 U32 wordlen = 0; /* required init */
1668 bool set_bit = trie->bitmap ? 1 : 0; /*store the first char in the bitmap?*/
1670 if (OP(noper) == NOTHING) {
1671 regnode *noper_next= regnext(noper);
1672 if (noper_next != tail && OP(noper_next) == flags) {
1674 uc= (U8*)STRING(noper);
1675 e= uc + STR_LEN(noper);
1676 trie->minlen= STR_LEN(noper);
1683 if ( set_bit ) { /* bitmap only alloced when !(UTF&&Folding) */
1684 TRIE_BITMAP_SET(trie,*uc); /* store the raw first byte
1685 regardless of encoding */
1686 if (OP( noper ) == EXACTFU_SS) {
1687 /* false positives are ok, so just set this */
1688 TRIE_BITMAP_SET(trie,0xDF);
1691 for ( ; uc < e ; uc += len ) {
1692 TRIE_CHARCOUNT(trie)++;
1697 U8 folded= folder[ (U8) uvc ];
1698 if ( !trie->charmap[ folded ] ) {
1699 trie->charmap[ folded ]=( ++trie->uniquecharcount );
1700 TRIE_STORE_REVCHAR( folded );
1703 if ( !trie->charmap[ uvc ] ) {
1704 trie->charmap[ uvc ]=( ++trie->uniquecharcount );
1705 TRIE_STORE_REVCHAR( uvc );
1708 /* store the codepoint in the bitmap, and its folded
1710 TRIE_BITMAP_SET(trie, uvc);
1712 /* store the folded codepoint */
1713 if ( folder ) TRIE_BITMAP_SET(trie, folder[(U8) uvc ]);
1716 /* store first byte of utf8 representation of
1717 variant codepoints */
1718 if (! UNI_IS_INVARIANT(uvc)) {
1719 TRIE_BITMAP_SET(trie, UTF8_TWO_BYTE_HI(uvc));
1722 set_bit = 0; /* We've done our bit :-) */
1727 widecharmap = newHV();
1729 svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 1 );
1732 Perl_croak( aTHX_ "error creating/fetching widecharmap entry for 0x%"UVXf, uvc );
1734 if ( !SvTRUE( *svpp ) ) {
1735 sv_setiv( *svpp, ++trie->uniquecharcount );
1736 TRIE_STORE_REVCHAR(uvc);
1740 if( cur == first ) {
1741 trie->minlen = chars;
1742 trie->maxlen = chars;
1743 } else if (chars < trie->minlen) {
1744 trie->minlen = chars;
1745 } else if (chars > trie->maxlen) {
1746 trie->maxlen = chars;
1748 if (OP( noper ) == EXACTFU_SS) {
1749 /* XXX: workaround - 'ss' could match "\x{DF}" so minlen could be 1 and not 2*/
1750 if (trie->minlen > 1)
1753 if (OP( noper ) == EXACTFU_TRICKYFOLD) {
1754 /* XXX: workround - things like "\x{1FBE}\x{0308}\x{0301}" can match "\x{0390}"
1755 * - We assume that any such sequence might match a 2 byte string */
1756 if (trie->minlen > 2 )
1760 } /* end first pass */
1761 DEBUG_TRIE_COMPILE_r(
1762 PerlIO_printf( Perl_debug_log, "%*sTRIE(%s): W:%d C:%d Uq:%d Min:%d Max:%d\n",
1763 (int)depth * 2 + 2,"",
1764 ( widecharmap ? "UTF8" : "NATIVE" ), (int)word_count,
1765 (int)TRIE_CHARCOUNT(trie), trie->uniquecharcount,
1766 (int)trie->minlen, (int)trie->maxlen )
1770 We now know what we are dealing with in terms of unique chars and
1771 string sizes so we can calculate how much memory a naive
1772 representation using a flat table will take. If it's over a reasonable
1773 limit (as specified by ${^RE_TRIE_MAXBUF}) we use a more memory
1774 conservative but potentially much slower representation using an array
1777 At the end we convert both representations into the same compressed
1778 form that will be used in regexec.c for matching with. The latter
1779 is a form that cannot be used to construct with but has memory
1780 properties similar to the list form and access properties similar
1781 to the table form making it both suitable for fast searches and
1782 small enough that its feasable to store for the duration of a program.
1784 See the comment in the code where the compressed table is produced
1785 inplace from the flat tabe representation for an explanation of how
1786 the compression works.
1791 Newx(prev_states, TRIE_CHARCOUNT(trie) + 2, U32);
1794 if ( (IV)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1) > SvIV(re_trie_maxbuff) ) {
1796 Second Pass -- Array Of Lists Representation
1798 Each state will be represented by a list of charid:state records
1799 (reg_trie_trans_le) the first such element holds the CUR and LEN
1800 points of the allocated array. (See defines above).
1802 We build the initial structure using the lists, and then convert
1803 it into the compressed table form which allows faster lookups
1804 (but cant be modified once converted).
1807 STRLEN transcount = 1;
1809 DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log,
1810 "%*sCompiling trie using list compiler\n",
1811 (int)depth * 2 + 2, ""));
1813 trie->states = (reg_trie_state *)
1814 PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2,
1815 sizeof(reg_trie_state) );
1819 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
1821 regnode *noper = NEXTOPER( cur );
1822 U8 *uc = (U8*)STRING( noper );
1823 const U8 *e = uc + STR_LEN( noper );
1824 U32 state = 1; /* required init */
1825 U16 charid = 0; /* sanity init */
1826 U8 *scan = (U8*)NULL; /* sanity init */
1827 STRLEN foldlen = 0; /* required init */
1828 U32 wordlen = 0; /* required init */
1829 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
1832 if (OP(noper) == NOTHING) {
1833 regnode *noper_next= regnext(noper);
1834 if (noper_next != tail && OP(noper_next) == flags) {
1836 uc= (U8*)STRING(noper);
1837 e= uc + STR_LEN(noper);
1841 if (OP(noper) != NOTHING) {
1842 for ( ; uc < e ; uc += len ) {
1847 charid = trie->charmap[ uvc ];
1849 SV** const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0);
1853 charid=(U16)SvIV( *svpp );
1856 /* charid is now 0 if we dont know the char read, or nonzero if we do */
1863 if ( !trie->states[ state ].trans.list ) {
1864 TRIE_LIST_NEW( state );
1866 for ( check = 1; check <= TRIE_LIST_USED( state ); check++ ) {
1867 if ( TRIE_LIST_ITEM( state, check ).forid == charid ) {
1868 newstate = TRIE_LIST_ITEM( state, check ).newstate;
1873 newstate = next_alloc++;
1874 prev_states[newstate] = state;
1875 TRIE_LIST_PUSH( state, charid, newstate );
1880 Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc );
1884 TRIE_HANDLE_WORD(state);
1886 } /* end second pass */
1888 /* next alloc is the NEXT state to be allocated */
1889 trie->statecount = next_alloc;
1890 trie->states = (reg_trie_state *)
1891 PerlMemShared_realloc( trie->states,
1893 * sizeof(reg_trie_state) );
1895 /* and now dump it out before we compress it */
1896 DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_list(trie, widecharmap,
1897 revcharmap, next_alloc,
1901 trie->trans = (reg_trie_trans *)
1902 PerlMemShared_calloc( transcount, sizeof(reg_trie_trans) );
1909 for( state=1 ; state < next_alloc ; state ++ ) {
1913 DEBUG_TRIE_COMPILE_MORE_r(
1914 PerlIO_printf( Perl_debug_log, "tp: %d zp: %d ",tp,zp)
1918 if (trie->states[state].trans.list) {
1919 U16 minid=TRIE_LIST_ITEM( state, 1).forid;
1923 for( idx = 2 ; idx <= TRIE_LIST_USED( state ) ; idx++ ) {
1924 const U16 forid = TRIE_LIST_ITEM( state, idx).forid;
1925 if ( forid < minid ) {
1927 } else if ( forid > maxid ) {
1931 if ( transcount < tp + maxid - minid + 1) {
1933 trie->trans = (reg_trie_trans *)
1934 PerlMemShared_realloc( trie->trans,
1936 * sizeof(reg_trie_trans) );
1937 Zero( trie->trans + (transcount / 2), transcount / 2 , reg_trie_trans );
1939 base = trie->uniquecharcount + tp - minid;
1940 if ( maxid == minid ) {
1942 for ( ; zp < tp ; zp++ ) {
1943 if ( ! trie->trans[ zp ].next ) {
1944 base = trie->uniquecharcount + zp - minid;
1945 trie->trans[ zp ].next = TRIE_LIST_ITEM( state, 1).newstate;
1946 trie->trans[ zp ].check = state;
1952 trie->trans[ tp ].next = TRIE_LIST_ITEM( state, 1).newstate;
1953 trie->trans[ tp ].check = state;
1958 for ( idx=1; idx <= TRIE_LIST_USED( state ) ; idx++ ) {
1959 const U32 tid = base - trie->uniquecharcount + TRIE_LIST_ITEM( state, idx ).forid;
1960 trie->trans[ tid ].next = TRIE_LIST_ITEM( state, idx ).newstate;
1961 trie->trans[ tid ].check = state;
1963 tp += ( maxid - minid + 1 );
1965 Safefree(trie->states[ state ].trans.list);
1968 DEBUG_TRIE_COMPILE_MORE_r(
1969 PerlIO_printf( Perl_debug_log, " base: %d\n",base);
1972 trie->states[ state ].trans.base=base;
1974 trie->lasttrans = tp + 1;
1978 Second Pass -- Flat Table Representation.
1980 we dont use the 0 slot of either trans[] or states[] so we add 1 to each.
1981 We know that we will need Charcount+1 trans at most to store the data
1982 (one row per char at worst case) So we preallocate both structures
1983 assuming worst case.
1985 We then construct the trie using only the .next slots of the entry
1988 We use the .check field of the first entry of the node temporarily to
1989 make compression both faster and easier by keeping track of how many non
1990 zero fields are in the node.
1992 Since trans are numbered from 1 any 0 pointer in the table is a FAIL
1995 There are two terms at use here: state as a TRIE_NODEIDX() which is a
1996 number representing the first entry of the node, and state as a
1997 TRIE_NODENUM() which is the trans number. state 1 is TRIE_NODEIDX(1) and
1998 TRIE_NODENUM(1), state 2 is TRIE_NODEIDX(2) and TRIE_NODENUM(3) if there
1999 are 2 entrys per node. eg:
2007 The table is internally in the right hand, idx form. However as we also
2008 have to deal with the states array which is indexed by nodenum we have to
2009 use TRIE_NODENUM() to convert.
2012 DEBUG_TRIE_COMPILE_MORE_r( PerlIO_printf( Perl_debug_log,
2013 "%*sCompiling trie using table compiler\n",
2014 (int)depth * 2 + 2, ""));
2016 trie->trans = (reg_trie_trans *)
2017 PerlMemShared_calloc( ( TRIE_CHARCOUNT(trie) + 1 )
2018 * trie->uniquecharcount + 1,
2019 sizeof(reg_trie_trans) );
2020 trie->states = (reg_trie_state *)
2021 PerlMemShared_calloc( TRIE_CHARCOUNT(trie) + 2,
2022 sizeof(reg_trie_state) );
2023 next_alloc = trie->uniquecharcount + 1;
2026 for ( cur = first ; cur < last ; cur = regnext( cur ) ) {
2028 regnode *noper = NEXTOPER( cur );
2029 const U8 *uc = (U8*)STRING( noper );
2030 const U8 *e = uc + STR_LEN( noper );
2032 U32 state = 1; /* required init */
2034 U16 charid = 0; /* sanity init */
2035 U32 accept_state = 0; /* sanity init */
2036 U8 *scan = (U8*)NULL; /* sanity init */
2038 STRLEN foldlen = 0; /* required init */
2039 U32 wordlen = 0; /* required init */
2041 U8 foldbuf[ UTF8_MAXBYTES_CASE + 1 ];
2043 if (OP(noper) == NOTHING) {
2044 regnode *noper_next= regnext(noper);
2045 if (noper_next != tail && OP(noper_next) == flags) {
2047 uc= (U8*)STRING(noper);
2048 e= uc + STR_LEN(noper);
2052 if ( OP(noper) != NOTHING ) {
2053 for ( ; uc < e ; uc += len ) {
2058 charid = trie->charmap[ uvc ];
2060 SV* const * const svpp = hv_fetch( widecharmap, (char*)&uvc, sizeof( UV ), 0);
2061 charid = svpp ? (U16)SvIV(*svpp) : 0;
2065 if ( !trie->trans[ state + charid ].next ) {
2066 trie->trans[ state + charid ].next = next_alloc;
2067 trie->trans[ state ].check++;
2068 prev_states[TRIE_NODENUM(next_alloc)]
2069 = TRIE_NODENUM(state);
2070 next_alloc += trie->uniquecharcount;
2072 state = trie->trans[ state + charid ].next;
2074 Perl_croak( aTHX_ "panic! In trie construction, no char mapping for %"IVdf, uvc );
2076 /* charid is now 0 if we dont know the char read, or nonzero if we do */
2079 accept_state = TRIE_NODENUM( state );
2080 TRIE_HANDLE_WORD(accept_state);
2082 } /* end second pass */
2084 /* and now dump it out before we compress it */
2085 DEBUG_TRIE_COMPILE_MORE_r(dump_trie_interim_table(trie, widecharmap,
2087 next_alloc, depth+1));
2091 * Inplace compress the table.*
2093 For sparse data sets the table constructed by the trie algorithm will
2094 be mostly 0/FAIL transitions or to put it another way mostly empty.
2095 (Note that leaf nodes will not contain any transitions.)
2097 This algorithm compresses the tables by eliminating most such
2098 transitions, at the cost of a modest bit of extra work during lookup:
2100 - Each states[] entry contains a .base field which indicates the
2101 index in the state[] array wheres its transition data is stored.
2103 - If .base is 0 there are no valid transitions from that node.
2105 - If .base is nonzero then charid is added to it to find an entry in
2108 -If trans[states[state].base+charid].check!=state then the
2109 transition is taken to be a 0/Fail transition. Thus if there are fail
2110 transitions at the front of the node then the .base offset will point
2111 somewhere inside the previous nodes data (or maybe even into a node
2112 even earlier), but the .check field determines if the transition is
2116 The following process inplace converts the table to the compressed
2117 table: We first do not compress the root node 1,and mark all its
2118 .check pointers as 1 and set its .base pointer as 1 as well. This
2119 allows us to do a DFA construction from the compressed table later,
2120 and ensures that any .base pointers we calculate later are greater
2123 - We set 'pos' to indicate the first entry of the second node.
2125 - We then iterate over the columns of the node, finding the first and
2126 last used entry at l and m. We then copy l..m into pos..(pos+m-l),
2127 and set the .check pointers accordingly, and advance pos
2128 appropriately and repreat for the next node. Note that when we copy
2129 the next pointers we have to convert them from the original
2130 NODEIDX form to NODENUM form as the former is not valid post
2133 - If a node has no transitions used we mark its base as 0 and do not
2134 advance the pos pointer.
2136 - If a node only has one transition we use a second pointer into the
2137 structure to fill in allocated fail transitions from other states.
2138 This pointer is independent of the main pointer and scans forward
2139 looking for null transitions that are allocated to a state. When it
2140 finds one it writes the single transition into the "hole". If the
2141 pointer doesnt find one the single transition is appended as normal.
2143 - Once compressed we can Renew/realloc the structures to release the
2146 See "Table-Compression Methods" in sec 3.9 of the Red Dragon,
2147 specifically Fig 3.47 and the associated pseudocode.
2151 const U32 laststate = TRIE_NODENUM( next_alloc );
2154 trie->statecount = laststate;
2156 for ( state = 1 ; state < laststate ; state++ ) {
2158 const U32 stateidx = TRIE_NODEIDX( state );
2159 const U32 o_used = trie->trans[ stateidx ].check;
2160 U32 used = trie->trans[ stateidx ].check;
2161 trie->trans[ stateidx ].check = 0;
2163 for ( charid = 0 ; used && charid < trie->uniquecharcount ; charid++ ) {
2164 if ( flag || trie->trans[ stateidx + charid ].next ) {
2165 if ( trie->trans[ stateidx + charid ].next ) {
2167 for ( ; zp < pos ; zp++ ) {
2168 if ( ! trie->trans[ zp ].next ) {
2172 trie->states[ state ].trans.base = zp + trie->uniquecharcount - charid ;
2173 trie->trans[ zp ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next );
2174 trie->trans[ zp ].check = state;
2175 if ( ++zp > pos ) pos = zp;
2182 trie->states[ state ].trans.base = pos + trie->uniquecharcount - charid ;
2184 trie->trans[ pos ].next = SAFE_TRIE_NODENUM( trie->trans[ stateidx + charid ].next );
2185 trie->trans[ pos ].check = state;
2190 trie->lasttrans = pos + 1;
2191 trie->states = (reg_trie_state *)
2192 PerlMemShared_realloc( trie->states, laststate
2193 * sizeof(reg_trie_state) );
2194 DEBUG_TRIE_COMPILE_MORE_r(
2195 PerlIO_printf( Perl_debug_log,
2196 "%*sAlloc: %d Orig: %"IVdf" elements, Final:%"IVdf". Savings of %%%5.2f\n",
2197 (int)depth * 2 + 2,"",
2198 (int)( ( TRIE_CHARCOUNT(trie) + 1 ) * trie->uniquecharcount + 1 ),
2201 ( ( next_alloc - pos ) * 100 ) / (double)next_alloc );
2204 } /* end table compress */
2206 DEBUG_TRIE_COMPILE_MORE_r(
2207 PerlIO_printf(Perl_debug_log, "%*sStatecount:%"UVxf" Lasttrans:%"UVxf"\n",
2208 (int)depth * 2 + 2, "",
2209 (UV)trie->statecount,
2210 (UV)trie->lasttrans)
2212 /* resize the trans array to remove unused space */
2213 trie->trans = (reg_trie_trans *)
2214 PerlMemShared_realloc( trie->trans, trie->lasttrans
2215 * sizeof(reg_trie_trans) );
2217 { /* Modify the program and insert the new TRIE node */
2218 U8 nodetype =(U8)(flags & 0xFF);
2222 regnode *optimize = NULL;
2223 #ifdef RE_TRACK_PATTERN_OFFSETS
2226 U32 mjd_nodelen = 0;
2227 #endif /* RE_TRACK_PATTERN_OFFSETS */
2228 #endif /* DEBUGGING */
2230 This means we convert either the first branch or the first Exact,
2231 depending on whether the thing following (in 'last') is a branch
2232 or not and whther first is the startbranch (ie is it a sub part of
2233 the alternation or is it the whole thing.)
2234 Assuming its a sub part we convert the EXACT otherwise we convert
2235 the whole branch sequence, including the first.
2237 /* Find the node we are going to overwrite */
2238 if ( first != startbranch || OP( last ) == BRANCH ) {
2239 /* branch sub-chain */
2240 NEXT_OFF( first ) = (U16)(last - first);
2241 #ifdef RE_TRACK_PATTERN_OFFSETS
2243 mjd_offset= Node_Offset((convert));
2244 mjd_nodelen= Node_Length((convert));
2247 /* whole branch chain */
2249 #ifdef RE_TRACK_PATTERN_OFFSETS
2252 const regnode *nop = NEXTOPER( convert );
2253 mjd_offset= Node_Offset((nop));
2254 mjd_nodelen= Node_Length((nop));
2258 PerlIO_printf(Perl_debug_log, "%*sMJD offset:%"UVuf" MJD length:%"UVuf"\n",
2259 (int)depth * 2 + 2, "",
2260 (UV)mjd_offset, (UV)mjd_nodelen)
2263 /* But first we check to see if there is a common prefix we can
2264 split out as an EXACT and put in front of the TRIE node. */
2265 trie->startstate= 1;
2266 if ( trie->bitmap && !widecharmap && !trie->jump ) {
2268 for ( state = 1 ; state < trie->statecount-1 ; state++ ) {
2272 const U32 base = trie->states[ state ].trans.base;
2274 if ( trie->states[state].wordnum )
2277 for ( ofs = 0 ; ofs < trie->uniquecharcount ; ofs++ ) {
2278 if ( ( base + ofs >= trie->uniquecharcount ) &&
2279 ( base + ofs - trie->uniquecharcount < trie->lasttrans ) &&
2280 trie->trans[ base + ofs - trie->uniquecharcount ].check == state )
2282 if ( ++count > 1 ) {
2283 SV **tmp = av_fetch( revcharmap, ofs, 0);
2284 const U8 *ch = (U8*)SvPV_nolen_const( *tmp );
2285 if ( state == 1 ) break;
2287 Zero(trie->bitmap, ANYOF_BITMAP_SIZE, char);
2289 PerlIO_printf(Perl_debug_log,
2290 "%*sNew Start State=%"UVuf" Class: [",
2291 (int)depth * 2 + 2, "",
2294 SV ** const tmp = av_fetch( revcharmap, idx, 0);
2295 const U8 * const ch = (U8*)SvPV_nolen_const( *tmp );
2297 TRIE_BITMAP_SET(trie,*ch);
2299 TRIE_BITMAP_SET(trie, folder[ *ch ]);
2301 PerlIO_printf(Perl_debug_log, "%s", (char*)ch)
2305 TRIE_BITMAP_SET(trie,*ch);
2307 TRIE_BITMAP_SET(trie,folder[ *ch ]);
2308 DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"%s", ch));
2314 SV **tmp = av_fetch( revcharmap, idx, 0);
2316 char *ch = SvPV( *tmp, len );
2318 SV *sv=sv_newmortal();
2319 PerlIO_printf( Perl_debug_log,
2320 "%*sPrefix State: %"UVuf" Idx:%"UVuf" Char='%s'\n",
2321 (int)depth * 2 + 2, "",
2323 pv_pretty(sv, SvPV_nolen_const(*tmp), SvCUR(*tmp), 6,
2324 PL_colors[0], PL_colors[1],
2325 (SvUTF8(*tmp) ? PERL_PV_ESCAPE_UNI : 0) |
2326 PERL_PV_ESCAPE_FIRSTCHAR
2331 OP( convert ) = nodetype;
2332 str=STRING(convert);
2335 STR_LEN(convert) += len;
2341 DEBUG_OPTIMISE_r(PerlIO_printf( Perl_debug_log,"]\n"));
2346 trie->prefixlen = (state-1);
2348 regnode *n = convert+NODE_SZ_STR(convert);
2349 NEXT_OFF(convert) = NODE_SZ_STR(convert);
2350 trie->startstate = state;
2351 trie->minlen -= (state - 1);
2352 trie->maxlen -= (state - 1);
2354 /* At least the UNICOS C compiler choked on this
2355 * being argument to DEBUG_r(), so let's just have
2358 #ifdef PERL_EXT_RE_BUILD
2364 regnode *fix = convert;
2365 U32 word = trie->wordcount;
2367 Set_Node_Offset_Length(convert, mjd_offset, state - 1);
2368 while( ++fix < n ) {
2369 Set_Node_Offset_Length(fix, 0, 0);
2372 SV ** const tmp = av_fetch( trie_words, word, 0 );
2374 if ( STR_LEN(convert) <= SvCUR(*tmp) )
2375 sv_chop(*tmp, SvPV_nolen(*tmp) + STR_LEN(convert));
2377 sv_chop(*tmp, SvPV_nolen(*tmp) + SvCUR(*tmp));
2385 NEXT_OFF(convert) = (U16)(tail - convert);
2386 DEBUG_r(optimize= n);
2392 if ( trie->maxlen ) {
2393 NEXT_OFF( convert ) = (U16)(tail - convert);
2394 ARG_SET( convert, data_slot );
2395 /* Store the offset to the first unabsorbed branch in
2396 jump[0], which is otherwise unused by the jump logic.
2397 We use this when dumping a trie and during optimisation. */
2399 trie->jump[0] = (U16)(nextbranch - convert);
2401 /* If the start state is not accepting (meaning there is no empty string/NOTHING)
2402 * and there is a bitmap
2403 * and the first "jump target" node we found leaves enough room
2404 * then convert the TRIE node into a TRIEC node, with the bitmap
2405 * embedded inline in the opcode - this is hypothetically faster.
2407 if ( !trie->states[trie->startstate].wordnum
2409 && ( (char *)jumper - (char *)convert) >= (int)sizeof(struct regnode_charclass) )
2411 OP( convert ) = TRIEC;
2412 Copy(trie->bitmap, ((struct regnode_charclass *)convert)->bitmap, ANYOF_BITMAP_SIZE, char);
2413 PerlMemShared_free(trie->bitmap);
2416 OP( convert ) = TRIE;
2418 /* store the type in the flags */
2419 convert->flags = nodetype;
2423 + regarglen[ OP( convert ) ];
2425 /* XXX We really should free up the resource in trie now,
2426 as we won't use them - (which resources?) dmq */
2428 /* needed for dumping*/
2429 DEBUG_r(if (optimize) {
2430 regnode *opt = convert;
2432 while ( ++opt < optimize) {
2433 Set_Node_Offset_Length(opt,0,0);
2436 Try to clean up some of the debris left after the
2439 while( optimize < jumper ) {
2440 mjd_nodelen += Node_Length((optimize));
2441 OP( optimize ) = OPTIMIZED;
2442 Set_Node_Offset_Length(optimize,0,0);
2445 Set_Node_Offset_Length(convert,mjd_offset,mjd_nodelen);
2447 } /* end node insert */
2449 /* Finish populating the prev field of the wordinfo array. Walk back
2450 * from each accept state until we find another accept state, and if
2451 * so, point the first word's .prev field at the second word. If the
2452 * second already has a .prev field set, stop now. This will be the
2453 * case either if we've already processed that word's accept state,
2454 * or that state had multiple words, and the overspill words were
2455 * already linked up earlier.
2462 for (word=1; word <= trie->wordcount; word++) {
2464 if (trie->wordinfo[word].prev)
2466 state = trie->wordinfo[word].accept;
2468 state = prev_states[state];
2471 prev = trie->states[state].wordnum;
2475 trie->wordinfo[word].prev = prev;
2477 Safefree(prev_states);
2481 /* and now dump out the compressed format */
2482 DEBUG_TRIE_COMPILE_r(dump_trie(trie, widecharmap, revcharmap, depth+1));
2484 RExC_rxi->data->data[ data_slot + 1 ] = (void*)widecharmap;
2486 RExC_rxi->data->data[ data_slot + TRIE_WORDS_OFFSET ] = (void*)trie_words;
2487 RExC_rxi->data->data[ data_slot + 3 ] = (void*)revcharmap;
2489 SvREFCNT_dec_NN(revcharmap);
2493 : trie->startstate>1
2499 S_make_trie_failtable(pTHX_ RExC_state_t *pRExC_state, regnode *source, regnode *stclass, U32 depth)
2501 /* The Trie is constructed and compressed now so we can build a fail array if it's needed
2503 This is basically the Aho-Corasick algorithm. Its from exercise 3.31 and 3.32 in the
2504 "Red Dragon" -- Compilers, principles, techniques, and tools. Aho, Sethi, Ullman 1985/88
2507 We find the fail state for each state in the trie, this state is the longest proper
2508 suffix of the current state's 'word' that is also a proper prefix of another word in our
2509 trie. State 1 represents the word '' and is thus the default fail state. This allows
2510 the DFA not to have to restart after its tried and failed a word at a given point, it
2511 simply continues as though it had been matching the other word in the first place.
2513 'abcdgu'=~/abcdefg|cdgu/
2514 When we get to 'd' we are still matching the first word, we would encounter 'g' which would
2515 fail, which would bring us to the state representing 'd' in the second word where we would
2516 try 'g' and succeed, proceeding to match 'cdgu'.
2518 /* add a fail transition */
2519 const U32 trie_offset = ARG(source);
2520 reg_trie_data *trie=(reg_trie_data *)RExC_rxi->data->data[trie_offset];
2522 const U32 ucharcount = trie->uniquecharcount;
2523 const U32 numstates = trie->statecount;
2524 const U32 ubound = trie->lasttrans + ucharcount;
2528 U32 base = trie->states[ 1 ].trans.base;
2531 const U32 data_slot = add_data( pRExC_state, 1, "T" );
2532 GET_RE_DEBUG_FLAGS_DECL;
2534 PERL_ARGS_ASSERT_MAKE_TRIE_FAILTABLE;
2536 PERL_UNUSED_ARG(depth);
2540 ARG_SET( stclass, data_slot );
2541 aho = (reg_ac_data *) PerlMemShared_calloc( 1, sizeof(reg_ac_data) );
2542 RExC_rxi->data->data[ data_slot ] = (void*)aho;
2543 aho->trie=trie_offset;
2544 aho->states=(reg_trie_state *)PerlMemShared_malloc( numstates * sizeof(reg_trie_state) );
2545 Copy( trie->states, aho->states, numstates, reg_trie_state );
2546 Newxz( q, numstates, U32);
2547 aho->fail = (U32 *) PerlMemShared_calloc( numstates, sizeof(U32) );
2550 /* initialize fail[0..1] to be 1 so that we always have
2551 a valid final fail state */
2552 fail[ 0 ] = fail[ 1 ] = 1;
2554 for ( charid = 0; charid < ucharcount ; charid++ ) {
2555 const U32 newstate = TRIE_TRANS_STATE( 1, base, ucharcount, charid, 0 );
2557 q[ q_write ] = newstate;
2558 /* set to point at the root */
2559 fail[ q[ q_write++ ] ]=1;
2562 while ( q_read < q_write) {
2563 const U32 cur = q[ q_read++ % numstates ];
2564 base = trie->states[ cur ].trans.base;
2566 for ( charid = 0 ; charid < ucharcount ; charid++ ) {
2567 const U32 ch_state = TRIE_TRANS_STATE( cur, base, ucharcount, charid, 1 );
2569 U32 fail_state = cur;
2572 fail_state = fail[ fail_state ];
2573 fail_base = aho->states[ fail_state ].trans.base;
2574 } while ( !TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 ) );
2576 fail_state = TRIE_TRANS_STATE( fail_state, fail_base, ucharcount, charid, 1 );
2577 fail[ ch_state ] = fail_state;
2578 if ( !aho->states[ ch_state ].wordnum && aho->states[ fail_state ].wordnum )
2580 aho->states[ ch_state ].wordnum = aho->states[ fail_state ].wordnum;
2582 q[ q_write++ % numstates] = ch_state;
2586 /* restore fail[0..1] to 0 so that we "fall out" of the AC loop
2587 when we fail in state 1, this allows us to use the
2588 charclass scan to find a valid start char. This is based on the principle
2589 that theres a good chance the string being searched contains lots of stuff
2590 that cant be a start char.
2592 fail[ 0 ] = fail[ 1 ] = 0;
2593 DEBUG_TRIE_COMPILE_r({
2594 PerlIO_printf(Perl_debug_log,
2595 "%*sStclass Failtable (%"UVuf" states): 0",
2596 (int)(depth * 2), "", (UV)numstates
2598 for( q_read=1; q_read<numstates; q_read++ ) {
2599 PerlIO_printf(Perl_debug_log, ", %"UVuf, (UV)fail[q_read]);
2601 PerlIO_printf(Perl_debug_log, "\n");
2604 /*RExC_seen |= REG_SEEN_TRIEDFA;*/
2609 * There are strange code-generation bugs caused on sparc64 by gcc-2.95.2.
2610 * These need to be revisited when a newer toolchain becomes available.
2612 #if defined(__sparc64__) && defined(__GNUC__)
2613 # if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 96)
2614 # undef SPARC64_GCC_WORKAROUND
2615 # define SPARC64_GCC_WORKAROUND 1
2619 #define DEBUG_PEEP(str,scan,depth) \
2620 DEBUG_OPTIMISE_r({if (scan){ \
2621 SV * const mysv=sv_newmortal(); \
2622 regnode *Next = regnext(scan); \
2623 regprop(RExC_rx, mysv, scan); \
2624 PerlIO_printf(Perl_debug_log, "%*s" str ">%3d: %s (%d)\n", \
2625 (int)depth*2, "", REG_NODE_NUM(scan), SvPV_nolen_const(mysv),\
2626 Next ? (REG_NODE_NUM(Next)) : 0 ); \
2630 /* The below joins as many adjacent EXACTish nodes as possible into a single
2631 * one. The regop may be changed if the node(s) contain certain sequences that
2632 * require special handling. The joining is only done if:
2633 * 1) there is room in the current conglomerated node to entirely contain the
2635 * 2) they are the exact same node type
2637 * The adjacent nodes actually may be separated by NOTHING-kind nodes, and
2638 * these get optimized out
2640 * If a node is to match under /i (folded), the number of characters it matches
2641 * can be different than its character length if it contains a multi-character
2642 * fold. *min_subtract is set to the total delta of the input nodes.
2644 * And *has_exactf_sharp_s is set to indicate whether or not the node is EXACTF
2645 * and contains LATIN SMALL LETTER SHARP S
2647 * This is as good a place as any to discuss the design of handling these
2648 * multi-character fold sequences. It's been wrong in Perl for a very long
2649 * time. There are three code points in Unicode whose multi-character folds
2650 * were long ago discovered to mess things up. The previous designs for
2651 * dealing with these involved assigning a special node for them. This
2652 * approach doesn't work, as evidenced by this example:
2653 * "\xDFs" =~ /s\xDF/ui # Used to fail before these patches
2654 * Both these fold to "sss", but if the pattern is parsed to create a node that
2655 * would match just the \xDF, it won't be able to handle the case where a
2656 * successful match would have to cross the node's boundary. The new approach
2657 * that hopefully generally solves the problem generates an EXACTFU_SS node
2660 * It turns out that there are problems with all multi-character folds, and not
2661 * just these three. Now the code is general, for all such cases, but the
2662 * three still have some special handling. The approach taken is:
2663 * 1) This routine examines each EXACTFish node that could contain multi-
2664 * character fold sequences. It returns in *min_subtract how much to
2665 * subtract from the the actual length of the string to get a real minimum
2666 * match length; it is 0 if there are no multi-char folds. This delta is
2667 * used by the caller to adjust the min length of the match, and the delta
2668 * between min and max, so that the optimizer doesn't reject these
2669 * possibilities based on size constraints.
2670 * 2) Certain of these sequences require special handling by the trie code,
2671 * so, if found, this code changes the joined node type to special ops:
2672 * EXACTFU_TRICKYFOLD and EXACTFU_SS.
2673 * 3) For the sequence involving the Sharp s (\xDF), the node type EXACTFU_SS
2674 * is used for an EXACTFU node that contains at least one "ss" sequence in
2675 * it. For non-UTF-8 patterns and strings, this is the only case where
2676 * there is a possible fold length change. That means that a regular
2677 * EXACTFU node without UTF-8 involvement doesn't have to concern itself
2678 * with length changes, and so can be processed faster. regexec.c takes
2679 * advantage of this. Generally, an EXACTFish node that is in UTF-8 is
2680 * pre-folded by regcomp.c. This saves effort in regex matching.
2681 * However, the pre-folding isn't done for non-UTF8 patterns because the
2682 * fold of the MICRO SIGN requires UTF-8, and we don't want to slow things
2683 * down by forcing the pattern into UTF8 unless necessary. Also what
2684 * EXACTF and EXACTFL nodes fold to isn't known until runtime. The fold
2685 * possibilities for the non-UTF8 patterns are quite simple, except for
2686 * the sharp s. All the ones that don't involve a UTF-8 target string are
2687 * members of a fold-pair, and arrays are set up for all of them so that
2688 * the other member of the pair can be found quickly. Code elsewhere in
2689 * this file makes sure that in EXACTFU nodes, the sharp s gets folded to
2690 * 'ss', even if the pattern isn't UTF-8. This avoids the issues
2691 * described in the next item.
2692 * 4) A problem remains for the sharp s in EXACTF and EXACTFA nodes when the
2693 * pattern isn't in UTF-8. (BTW, there cannot be an EXACTF node with a
2694 * UTF-8 pattern.) An assumption that the optimizer part of regexec.c
2695 * (probably unwittingly, in Perl_regexec_flags()) makes is that a
2696 * character in the pattern corresponds to at most a single character in
2697 * the target string. (And I do mean character, and not byte here, unlike
2698 * other parts of the documentation that have never been updated to
2699 * account for multibyte Unicode.) sharp s in EXACTF nodes can match the
2700 * two character string 'ss'; in EXACTFA nodes it can match
2701 * "\x{17F}\x{17F}". These violate the assumption, and they are the only
2702 * instances where it is violated. I'm reluctant to try to change the
2703 * assumption, as the code involved is impenetrable to me (khw), so
2704 * instead the code here punts. This routine examines (when the pattern
2705 * isn't UTF-8) EXACTF and EXACTFA nodes for the sharp s, and returns a
2706 * boolean indicating whether or not the node contains a sharp s. When it
2707 * is true, the caller sets a flag that later causes the optimizer in this
2708 * file to not set values for the floating and fixed string lengths, and
2709 * thus avoids the optimizer code in regexec.c that makes the invalid
2710 * assumption. Thus, there is no optimization based on string lengths for
2711 * non-UTF8-pattern EXACTF and EXACTFA nodes that contain the sharp s.
2712 * (The reason the assumption is wrong only in these two cases is that all
2713 * other non-UTF-8 folds are 1-1; and, for UTF-8 patterns, we pre-fold all
2714 * other folds to their expanded versions. We can't prefold sharp s to
2715 * 'ss' in EXACTF nodes because we don't know at compile time if it
2716 * actually matches 'ss' or not. It will match iff the target string is
2717 * in UTF-8, unlike the EXACTFU nodes, where it always matches; and
2718 * EXACTFA and EXACTFL where it never does. In an EXACTFA node in a UTF-8
2719 * pattern, sharp s is folded to "\x{17F}\x{17F}, avoiding the problem;
2720 * but in a non-UTF8 pattern, folding it to that above-Latin1 string would
2721 * require the pattern to be forced into UTF-8, the overhead of which we
2725 #define JOIN_EXACT(scan,min_subtract,has_exactf_sharp_s, flags) \
2726 if (PL_regkind[OP(scan)] == EXACT) \
2727 join_exact(pRExC_state,(scan),(min_subtract),has_exactf_sharp_s, (flags),NULL,depth+1)
2730 S_join_exact(pTHX_ RExC_state_t *pRExC_state, regnode *scan, UV *min_subtract, bool *has_exactf_sharp_s, U32 flags,regnode *val, U32 depth) {
2731 /* Merge several consecutive EXACTish nodes into one. */
2732 regnode *n = regnext(scan);
2734 regnode *next = scan + NODE_SZ_STR(scan);
2738 regnode *stop = scan;
2739 GET_RE_DEBUG_FLAGS_DECL;
2741 PERL_UNUSED_ARG(depth);
2744 PERL_ARGS_ASSERT_JOIN_EXACT;
2745 #ifndef EXPERIMENTAL_INPLACESCAN
2746 PERL_UNUSED_ARG(flags);
2747 PERL_UNUSED_ARG(val);
2749 DEBUG_PEEP("join",scan,depth);
2751 /* Look through the subsequent nodes in the chain. Skip NOTHING, merge
2752 * EXACT ones that are mergeable to the current one. */
2754 && (PL_regkind[OP(n)] == NOTHING
2755 || (stringok && OP(n) == OP(scan)))
2757 && NEXT_OFF(scan) + NEXT_OFF(n) < I16_MAX)
2760 if (OP(n) == TAIL || n > next)
2762 if (PL_regkind[OP(n)] == NOTHING) {
2763 DEBUG_PEEP("skip:",n,depth);
2764 NEXT_OFF(scan) += NEXT_OFF(n);
2765 next = n + NODE_STEP_REGNODE;
2772 else if (stringok) {
2773 const unsigned int oldl = STR_LEN(scan);
2774 regnode * const nnext = regnext(n);
2776 /* XXX I (khw) kind of doubt that this works on platforms where
2777 * U8_MAX is above 255 because of lots of other assumptions */
2778 /* Don't join if the sum can't fit into a single node */
2779 if (oldl + STR_LEN(n) > U8_MAX)
2782 DEBUG_PEEP("merg",n,depth);
2785 NEXT_OFF(scan) += NEXT_OFF(n);
2786 STR_LEN(scan) += STR_LEN(n);
2787 next = n + NODE_SZ_STR(n);
2788 /* Now we can overwrite *n : */
2789 Move(STRING(n), STRING(scan) + oldl, STR_LEN(n), char);
2797 #ifdef EXPERIMENTAL_INPLACESCAN
2798 if (flags && !NEXT_OFF(n)) {
2799 DEBUG_PEEP("atch", val, depth);
2800 if (reg_off_by_arg[OP(n)]) {
2801 ARG_SET(n, val - n);
2804 NEXT_OFF(n) = val - n;
2812 *has_exactf_sharp_s = FALSE;
2814 /* Here, all the adjacent mergeable EXACTish nodes have been merged. We
2815 * can now analyze for sequences of problematic code points. (Prior to
2816 * this final joining, sequences could have been split over boundaries, and
2817 * hence missed). The sequences only happen in folding, hence for any
2818 * non-EXACT EXACTish node */
2819 if (OP(scan) != EXACT) {
2820 const U8 * const s0 = (U8*) STRING(scan);
2822 const U8 * const s_end = s0 + STR_LEN(scan);
2824 /* One pass is made over the node's string looking for all the
2825 * possibilities. to avoid some tests in the loop, there are two main
2826 * cases, for UTF-8 patterns (which can't have EXACTF nodes) and
2830 /* Examine the string for a multi-character fold sequence. UTF-8
2831 * patterns have all characters pre-folded by the time this code is
2833 while (s < s_end - 1) /* Can stop 1 before the end, as minimum
2834 length sequence we are looking for is 2 */
2837 int len = is_MULTI_CHAR_FOLD_utf8_safe(s, s_end);
2838 if (! len) { /* Not a multi-char fold: get next char */
2843 /* Nodes with 'ss' require special handling, except for EXACTFL
2844 * and EXACTFA for which there is no multi-char fold to this */
2845 if (len == 2 && *s == 's' && *(s+1) == 's'
2846 && OP(scan) != EXACTFL && OP(scan) != EXACTFA)
2849 OP(scan) = EXACTFU_SS;
2852 else if (len == 6 /* len is the same in both ASCII and EBCDIC
2854 && (memEQ(s, GREEK_SMALL_LETTER_IOTA_UTF8
2855 COMBINING_DIAERESIS_UTF8
2856 COMBINING_ACUTE_ACCENT_UTF8,
2858 || memEQ(s, GREEK_SMALL_LETTER_UPSILON_UTF8
2859 COMBINING_DIAERESIS_UTF8
2860 COMBINING_ACUTE_ACCENT_UTF8,
2865 /* These two folds require special handling by trie's, so
2866 * change the node type to indicate this. If EXACTFA and
2867 * EXACTFL were ever to be handled by trie's, this would
2868 * have to be changed. If this node has already been
2869 * changed to EXACTFU_SS in this loop, leave it as is. (I
2870 * (khw) think it doesn't matter in regexec.c for UTF
2871 * patterns, but no need to change it */
2872 if (OP(scan) == EXACTFU) {
2873 OP(scan) = EXACTFU_TRICKYFOLD;
2877 else { /* Here is a generic multi-char fold. */
2878 const U8* multi_end = s + len;
2880 /* Count how many characters in it. In the case of /l and
2881 * /aa, no folds which contain ASCII code points are
2882 * allowed, so check for those, and skip if found. (In
2883 * EXACTFL, no folds are allowed to any Latin1 code point,
2884 * not just ASCII. But there aren't any of these
2885 * currently, nor ever likely, so don't take the time to
2886 * test for them. The code that generates the
2887 * is_MULTI_foo() macros croaks should one actually get put
2888 * into Unicode .) */
2889 if (OP(scan) != EXACTFL && OP(scan) != EXACTFA) {
2890 count = utf8_length(s, multi_end);
2894 while (s < multi_end) {
2897 goto next_iteration;
2907 /* The delta is how long the sequence is minus 1 (1 is how long
2908 * the character that folds to the sequence is) */
2909 *min_subtract += count - 1;
2913 else if (OP(scan) == EXACTFA) {
2915 /* Non-UTF-8 pattern, EXACTFA node. There can't be a multi-char
2916 * fold to the ASCII range (and there are no existing ones in the
2917 * upper latin1 range). But, as outlined in the comments preceding
2918 * this function, we need to flag any occurrences of the sharp s */
2920 if (*s == LATIN_SMALL_LETTER_SHARP_S) {
2921 *has_exactf_sharp_s = TRUE;
2928 else if (OP(scan) != EXACTFL) {
2930 /* Non-UTF-8 pattern, not EXACTFA nor EXACTFL node. Look for the
2931 * multi-char folds that are all Latin1. (This code knows that
2932 * there are no current multi-char folds possible with EXACTFL,
2933 * relying on fold_grind.t to catch any errors if the very unlikely
2934 * event happens that some get added in future Unicode versions.)
2935 * As explained in the comments preceding this function, we look
2936 * also for the sharp s in EXACTF nodes; it can be in the final
2937 * position. Otherwise we can stop looking 1 byte earlier because
2938 * have to find at least two characters for a multi-fold */
2939 const U8* upper = (OP(scan) == EXACTF) ? s_end : s_end -1;
2941 /* The below is perhaps overboard, but this allows us to save a
2942 * test each time through the loop at the expense of a mask. This
2943 * is because on both EBCDIC and ASCII machines, 'S' and 's' differ
2944 * by a single bit. On ASCII they are 32 apart; on EBCDIC, they
2945 * are 64. This uses an exclusive 'or' to find that bit and then
2946 * inverts it to form a mask, with just a single 0, in the bit
2947 * position where 'S' and 's' differ. */
2948 const U8 S_or_s_mask = (U8) ~ ('S' ^ 's');
2949 const U8 s_masked = 's' & S_or_s_mask;
2952 int len = is_MULTI_CHAR_FOLD_latin1_safe(s, s_end);
2953 if (! len) { /* Not a multi-char fold. */
2954 if (*s == LATIN_SMALL_LETTER_SHARP_S && OP(scan) == EXACTF)
2956 *has_exactf_sharp_s = TRUE;
2963 && ((*s & S_or_s_mask) == s_masked)
2964 && ((*(s+1) & S_or_s_mask) == s_masked))
2967 /* EXACTF nodes need to know that the minimum length
2968 * changed so that a sharp s in the string can match this
2969 * ss in the pattern, but they remain EXACTF nodes, as they
2970 * won't match this unless the target string is is UTF-8,
2971 * which we don't know until runtime */
2972 if (OP(scan) != EXACTF) {
2973 OP(scan) = EXACTFU_SS;
2977 *min_subtract += len - 1;
2984 /* Allow dumping but overwriting the collection of skipped
2985 * ops and/or strings with fake optimized ops */
2986 n = scan + NODE_SZ_STR(scan);
2994 DEBUG_OPTIMISE_r(if (merged){DEBUG_PEEP("finl",scan,depth)});
2998 /* REx optimizer. Converts nodes into quicker variants "in place".
2999 Finds fixed substrings. */
3001 /* Stops at toplevel WHILEM as well as at "last". At end *scanp is set
3002 to the position after last scanned or to NULL. */
3004 #define INIT_AND_WITHP \
3005 assert(!and_withp); \
3006 Newx(and_withp,1,struct regnode_charclass_class); \
3007 SAVEFREEPV(and_withp)
3009 /* this is a chain of data about sub patterns we are processing that
3010 need to be handled separately/specially in study_chunk. Its so
3011 we can simulate recursion without losing state. */
3013 typedef struct scan_frame {
3014 regnode *last; /* last node to process in this frame */
3015 regnode *next; /* next node to process when last is reached */
3016 struct scan_frame *prev; /*previous frame*/
3017 I32 stop; /* what stopparen do we use */
3021 #define SCAN_COMMIT(s, data, m) scan_commit(s, data, m, is_inf)
3024 S_study_chunk(pTHX_ RExC_state_t *pRExC_state, regnode **scanp,
3025 I32 *minlenp, I32 *deltap,
3030 struct regnode_charclass_class *and_withp,
3031 U32 flags, U32 depth)
3032 /* scanp: Start here (read-write). */
3033 /* deltap: Write maxlen-minlen here. */
3034 /* last: Stop before this one. */
3035 /* data: string data about the pattern */
3036 /* stopparen: treat close N as END */
3037 /* recursed: which subroutines have we recursed into */
3038 /* and_withp: Valid if flags & SCF_DO_STCLASS_OR */
3041 I32 min = 0; /* There must be at least this number of characters to match */
3043 regnode *scan = *scanp, *next;
3045 int is_inf = (flags & SCF_DO_SUBSTR) && (data->flags & SF_IS_INF);
3046 int is_inf_internal = 0; /* The studied chunk is infinite */
3047 I32 is_par = OP(scan) == OPEN ? ARG(scan) : 0;
3048 scan_data_t data_fake;
3049 SV *re_trie_maxbuff = NULL;
3050 regnode *first_non_open = scan;
3051 I32 stopmin = I32_MAX;
3052 scan_frame *frame = NULL;
3053 GET_RE_DEBUG_FLAGS_DECL;
3055 PERL_ARGS_ASSERT_STUDY_CHUNK;
3058 StructCopy(&zero_scan_data, &data_fake, scan_data_t);
3062 while (first_non_open && OP(first_non_open) == OPEN)
3063 first_non_open=regnext(first_non_open);
3068 while ( scan && OP(scan) != END && scan < last ){
3069 UV min_subtract = 0; /* How mmany chars to subtract from the minimum
3070 node length to get a real minimum (because
3071 the folded version may be shorter) */
3072 bool has_exactf_sharp_s = FALSE;
3073 /* Peephole optimizer: */
3074 DEBUG_STUDYDATA("Peep:", data,depth);
3075 DEBUG_PEEP("Peep",scan,depth);
3077 /* Its not clear to khw or hv why this is done here, and not in the
3078 * clauses that deal with EXACT nodes. khw's guess is that it's
3079 * because of a previous design */
3080 JOIN_EXACT(scan,&min_subtract, &has_exactf_sharp_s, 0);
3082 /* Follow the next-chain of the current node and optimize
3083 away all the NOTHINGs from it. */
3084 if (OP(scan) != CURLYX) {
3085 const int max = (reg_off_by_arg[OP(scan)]
3087 /* I32 may be smaller than U16 on CRAYs! */
3088 : (I32_MAX < U16_MAX ? I32_MAX : U16_MAX));
3089 int off = (reg_off_by_arg[OP(scan)] ? ARG(scan) : NEXT_OFF(scan));
3093 /* Skip NOTHING and LONGJMP. */
3094 while ((n = regnext(n))
3095 && ((PL_regkind[OP(n)] == NOTHING && (noff = NEXT_OFF(n)))
3096 || ((OP(n) == LONGJMP) && (noff = ARG(n))))
3097 && off + noff < max)
3099 if (reg_off_by_arg[OP(scan)])
3102 NEXT_OFF(scan) = off;
3107 /* The principal pseudo-switch. Cannot be a switch, since we
3108 look into several different things. */
3109 if (OP(scan) == BRANCH || OP(scan) == BRANCHJ
3110 || OP(scan) == IFTHEN) {
3111 next = regnext(scan);
3113 /* demq: the op(next)==code check is to see if we have "branch-branch" AFAICT */
3115 if (OP(next) == code || code == IFTHEN) {
3116 /* NOTE - There is similar code to this block below for handling
3117 TRIE nodes on a re-study. If you change stuff here check there
3119 I32 max1 = 0, min1 = I32_MAX, num = 0;
3120 struct regnode_charclass_class accum;
3121 regnode * const startbranch=scan;
3123 if (flags & SCF_DO_SUBSTR)
3124 SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot merge strings after this. */
3125 if (flags & SCF_DO_STCLASS)
3126 cl_init_zero(pRExC_state, &accum);
3128 while (OP(scan) == code) {
3129 I32 deltanext, minnext, f = 0, fake;
3130 struct regnode_charclass_class this_class;
3133 data_fake.flags = 0;
3135 data_fake.whilem_c = data->whilem_c;
3136 data_fake.last_closep = data->last_closep;
3139 data_fake.last_closep = &fake;
3141 data_fake.pos_delta = delta;
3142 next = regnext(scan);
3143 scan = NEXTOPER(scan);
3145 scan = NEXTOPER(scan);
3146 if (flags & SCF_DO_STCLASS) {
3147 cl_init(pRExC_state, &this_class);
3148 data_fake.start_class = &this_class;
3149 f = SCF_DO_STCLASS_AND;
3151 if (flags & SCF_WHILEM_VISITED_POS)
3152 f |= SCF_WHILEM_VISITED_POS;
3154 /* we suppose the run is continuous, last=next...*/
3155 minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext,
3157 stopparen, recursed, NULL, f,depth+1);
3160 if (deltanext == I32_MAX) {
3161 is_inf = is_inf_internal = 1;
3163 } else if (max1 < minnext + deltanext)
3164 max1 = minnext + deltanext;
3166 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
3168 if (data_fake.flags & SCF_SEEN_ACCEPT) {
3169 if ( stopmin > minnext)
3170 stopmin = min + min1;
3171 flags &= ~SCF_DO_SUBSTR;
3173 data->flags |= SCF_SEEN_ACCEPT;
3176 if (data_fake.flags & SF_HAS_EVAL)
3177 data->flags |= SF_HAS_EVAL;
3178 data->whilem_c = data_fake.whilem_c;
3180 if (flags & SCF_DO_STCLASS)
3181 cl_or(pRExC_state, &accum, &this_class);
3183 if (code == IFTHEN && num < 2) /* Empty ELSE branch */
3185 if (flags & SCF_DO_SUBSTR) {
3186 data->pos_min += min1;
3187 if (data->pos_delta >= I32_MAX - (max1 - min1))
3188 data->pos_delta = I32_MAX;
3190 data->pos_delta += max1 - min1;
3191 if (max1 != min1 || is_inf)
3192 data->longest = &(data->longest_float);
3195 if (delta == I32_MAX || I32_MAX - delta - (max1 - min1) < 0)
3198 delta += max1 - min1;
3199 if (flags & SCF_DO_STCLASS_OR) {
3200 cl_or(pRExC_state, data->start_class, &accum);
3202 cl_and(data->start_class, and_withp);
3203 flags &= ~SCF_DO_STCLASS;
3206 else if (flags & SCF_DO_STCLASS_AND) {
3208 cl_and(data->start_class, &accum);
3209 flags &= ~SCF_DO_STCLASS;
3212 /* Switch to OR mode: cache the old value of
3213 * data->start_class */
3215 StructCopy(data->start_class, and_withp,
3216 struct regnode_charclass_class);
3217 flags &= ~SCF_DO_STCLASS_AND;
3218 StructCopy(&accum, data->start_class,
3219 struct regnode_charclass_class);
3220 flags |= SCF_DO_STCLASS_OR;
3221 SET_SSC_EOS(data->start_class);
3225 if (PERL_ENABLE_TRIE_OPTIMISATION && OP( startbranch ) == BRANCH ) {
3228 Assuming this was/is a branch we are dealing with: 'scan' now
3229 points at the item that follows the branch sequence, whatever
3230 it is. We now start at the beginning of the sequence and look
3237 which would be constructed from a pattern like /A|LIST|OF|WORDS/
3239 If we can find such a subsequence we need to turn the first
3240 element into a trie and then add the subsequent branch exact
3241 strings to the trie.
3245 1. patterns where the whole set of branches can be converted.
3247 2. patterns where only a subset can be converted.
3249 In case 1 we can replace the whole set with a single regop
3250 for the trie. In case 2 we need to keep the start and end
3253 'BRANCH EXACT; BRANCH EXACT; BRANCH X'
3254 becomes BRANCH TRIE; BRANCH X;
3256 There is an additional case, that being where there is a
3257 common prefix, which gets split out into an EXACT like node
3258 preceding the TRIE node.
3260 If x(1..n)==tail then we can do a simple trie, if not we make
3261 a "jump" trie, such that when we match the appropriate word
3262 we "jump" to the appropriate tail node. Essentially we turn
3263 a nested if into a case structure of sorts.
3268 if (!re_trie_maxbuff) {
3269 re_trie_maxbuff = get_sv(RE_TRIE_MAXBUF_NAME, 1);
3270 if (!SvIOK(re_trie_maxbuff))
3271 sv_setiv(re_trie_maxbuff, RE_TRIE_MAXBUF_INIT);
3273 if ( SvIV(re_trie_maxbuff)>=0 ) {
3275 regnode *first = (regnode *)NULL;
3276 regnode *last = (regnode *)NULL;
3277 regnode *tail = scan;
3282 SV * const mysv = sv_newmortal(); /* for dumping */
3284 /* var tail is used because there may be a TAIL
3285 regop in the way. Ie, the exacts will point to the
3286 thing following the TAIL, but the last branch will
3287 point at the TAIL. So we advance tail. If we
3288 have nested (?:) we may have to move through several
3292 while ( OP( tail ) == TAIL ) {
3293 /* this is the TAIL generated by (?:) */
3294 tail = regnext( tail );
3298 DEBUG_TRIE_COMPILE_r({
3299 regprop(RExC_rx, mysv, tail );
3300 PerlIO_printf( Perl_debug_log, "%*s%s%s\n",
3301 (int)depth * 2 + 2, "",
3302 "Looking for TRIE'able sequences. Tail node is: ",
3303 SvPV_nolen_const( mysv )
3309 Step through the branches
3310 cur represents each branch,
3311 noper is the first thing to be matched as part of that branch
3312 noper_next is the regnext() of that node.
3314 We normally handle a case like this /FOO[xyz]|BAR[pqr]/
3315 via a "jump trie" but we also support building with NOJUMPTRIE,
3316 which restricts the trie logic to structures like /FOO|BAR/.
3318 If noper is a trieable nodetype then the branch is a possible optimization
3319 target. If we are building under NOJUMPTRIE then we require that noper_next
3320 is the same as scan (our current position in the regex program).
3322 Once we have two or more consecutive such branches we can create a
3323 trie of the EXACT's contents and stitch it in place into the program.
3325 If the sequence represents all of the branches in the alternation we
3326 replace the entire thing with a single TRIE node.
3328 Otherwise when it is a subsequence we need to stitch it in place and
3329 replace only the relevant branches. This means the first branch has
3330 to remain as it is used by the alternation logic, and its next pointer,
3331 and needs to be repointed at the item on the branch chain following
3332 the last branch we have optimized away.
3334 This could be either a BRANCH, in which case the subsequence is internal,
3335 or it could be the item following the branch sequence in which case the
3336 subsequence is at the end (which does not necessarily mean the first node
3337 is the start of the alternation).
3339 TRIE_TYPE(X) is a define which maps the optype to a trietype.
3342 ----------------+-----------
3346 EXACTFU_SS | EXACTFU
3347 EXACTFU_TRICKYFOLD | EXACTFU
3352 #define TRIE_TYPE(X) ( ( NOTHING == (X) ) ? NOTHING : \
3353 ( EXACT == (X) ) ? EXACT : \
3354 ( EXACTFU == (X) || EXACTFU_SS == (X) || EXACTFU_TRICKYFOLD == (X) ) ? EXACTFU : \
3357 /* dont use tail as the end marker for this traverse */
3358 for ( cur = startbranch ; cur != scan ; cur = regnext( cur ) ) {
3359 regnode * const noper = NEXTOPER( cur );
3360 U8 noper_type = OP( noper );
3361 U8 noper_trietype = TRIE_TYPE( noper_type );
3362 #if defined(DEBUGGING) || defined(NOJUMPTRIE)
3363 regnode * const noper_next = regnext( noper );
3364 U8 noper_next_type = (noper_next && noper_next != tail) ? OP(noper_next) : 0;
3365 U8 noper_next_trietype = (noper_next && noper_next != tail) ? TRIE_TYPE( noper_next_type ) :0;
3368 DEBUG_TRIE_COMPILE_r({
3369 regprop(RExC_rx, mysv, cur);
3370 PerlIO_printf( Perl_debug_log, "%*s- %s (%d)",
3371 (int)depth * 2 + 2,"", SvPV_nolen_const( mysv ), REG_NODE_NUM(cur) );
3373 regprop(RExC_rx, mysv, noper);
3374 PerlIO_printf( Perl_debug_log, " -> %s",
3375 SvPV_nolen_const(mysv));
3378 regprop(RExC_rx, mysv, noper_next );
3379 PerlIO_printf( Perl_debug_log,"\t=> %s\t",
3380 SvPV_nolen_const(mysv));
3382 PerlIO_printf( Perl_debug_log, "(First==%d,Last==%d,Cur==%d,tt==%s,nt==%s,nnt==%s)\n",
3383 REG_NODE_NUM(first), REG_NODE_NUM(last), REG_NODE_NUM(cur),
3384 PL_reg_name[trietype], PL_reg_name[noper_trietype], PL_reg_name[noper_next_trietype]
3388 /* Is noper a trieable nodetype that can be merged with the
3389 * current trie (if there is one)? */
3393 ( noper_trietype == NOTHING)
3394 || ( trietype == NOTHING )
3395 || ( trietype == noper_trietype )
3398 && noper_next == tail
3402 /* Handle mergable triable node
3403 * Either we are the first node in a new trieable sequence,
3404 * in which case we do some bookkeeping, otherwise we update
3405 * the end pointer. */
3408 if ( noper_trietype == NOTHING ) {
3409 #if !defined(DEBUGGING) && !defined(NOJUMPTRIE)
3410 regnode * const noper_next = regnext( noper );
3411 U8 noper_next_type = (noper_next && noper_next!=tail) ? OP(noper_next) : 0;
3412 U8 noper_next_trietype = noper_next_type ? TRIE_TYPE( noper_next_type ) :0;
3415 if ( noper_next_trietype ) {
3416 trietype = noper_next_trietype;
3417 } else if (noper_next_type) {
3418 /* a NOTHING regop is 1 regop wide. We need at least two
3419 * for a trie so we can't merge this in */
3423 trietype = noper_trietype;
3426 if ( trietype == NOTHING )
3427 trietype = noper_trietype;
3432 } /* end handle mergable triable node */
3434 /* handle unmergable node -
3435 * noper may either be a triable node which can not be tried
3436 * together with the current trie, or a non triable node */
3438 /* If last is set and trietype is not NOTHING then we have found
3439 * at least two triable branch sequences in a row of a similar
3440 * trietype so we can turn them into a trie. If/when we
3441 * allow NOTHING to start a trie sequence this condition will be
3442 * required, and it isn't expensive so we leave it in for now. */
3443 if ( trietype && trietype != NOTHING )
3444 make_trie( pRExC_state,
3445 startbranch, first, cur, tail, count,
3446 trietype, depth+1 );
3447 last = NULL; /* note: we clear/update first, trietype etc below, so we dont do it here */
3451 && noper_next == tail
3454 /* noper is triable, so we can start a new trie sequence */
3457 trietype = noper_trietype;
3459 /* if we already saw a first but the current node is not triable then we have
3460 * to reset the first information. */
3465 } /* end handle unmergable node */
3466 } /* loop over branches */
3467 DEBUG_TRIE_COMPILE_r({
3468 regprop(RExC_rx, mysv, cur);
3469 PerlIO_printf( Perl_debug_log,
3470 "%*s- %s (%d) <SCAN FINISHED>\n", (int)depth * 2 + 2,
3471 "", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur));
3474 if ( last && trietype ) {
3475 if ( trietype != NOTHING ) {
3476 /* the last branch of the sequence was part of a trie,
3477 * so we have to construct it here outside of the loop
3479 made= make_trie( pRExC_state, startbranch, first, scan, tail, count, trietype, depth+1 );
3480 #ifdef TRIE_STUDY_OPT
3481 if ( ((made == MADE_EXACT_TRIE &&
3482 startbranch == first)
3483 || ( first_non_open == first )) &&
3485 flags |= SCF_TRIE_RESTUDY;
3486 if ( startbranch == first
3489 RExC_seen &=~REG_TOP_LEVEL_BRANCHES;
3494 /* at this point we know whatever we have is a NOTHING sequence/branch
3495 * AND if 'startbranch' is 'first' then we can turn the whole thing into a NOTHING
3497 if ( startbranch == first ) {
3499 /* the entire thing is a NOTHING sequence, something like this:
3500 * (?:|) So we can turn it into a plain NOTHING op. */
3501 DEBUG_TRIE_COMPILE_r({
3502 regprop(RExC_rx, mysv, cur);
3503 PerlIO_printf( Perl_debug_log,
3504 "%*s- %s (%d) <NOTHING BRANCH SEQUENCE>\n", (int)depth * 2 + 2,
3505 "", SvPV_nolen_const( mysv ),REG_NODE_NUM(cur));
3508 OP(startbranch)= NOTHING;
3509 NEXT_OFF(startbranch)= tail - startbranch;
3510 for ( opt= startbranch + 1; opt < tail ; opt++ )
3514 } /* end if ( last) */
3515 } /* TRIE_MAXBUF is non zero */
3520 else if ( code == BRANCHJ ) { /* single branch is optimized. */
3521 scan = NEXTOPER(NEXTOPER(scan));
3522 } else /* single branch is optimized. */
3523 scan = NEXTOPER(scan);
3525 } else if (OP(scan) == SUSPEND || OP(scan) == GOSUB || OP(scan) == GOSTART) {
3526 scan_frame *newframe = NULL;
3531 if (OP(scan) != SUSPEND) {
3532 /* set the pointer */
3533 if (OP(scan) == GOSUB) {
3535 RExC_recurse[ARG2L(scan)] = scan;
3536 start = RExC_open_parens[paren-1];
3537 end = RExC_close_parens[paren-1];
3540 start = RExC_rxi->program + 1;
3544 Newxz(recursed, (((RExC_npar)>>3) +1), U8);
3545 SAVEFREEPV(recursed);
3547 if (!PAREN_TEST(recursed,paren+1)) {
3548 PAREN_SET(recursed,paren+1);
3549 Newx(newframe,1,scan_frame);
3551 if (flags & SCF_DO_SUBSTR) {
3552 SCAN_COMMIT(pRExC_state,data,minlenp);
3553 data->longest = &(data->longest_float);
3555 is_inf = is_inf_internal = 1;
3556 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
3557 cl_anything(pRExC_state, data->start_class);
3558 flags &= ~SCF_DO_STCLASS;
3561 Newx(newframe,1,scan_frame);
3564 end = regnext(scan);
3569 SAVEFREEPV(newframe);
3570 newframe->next = regnext(scan);
3571 newframe->last = last;
3572 newframe->stop = stopparen;
3573 newframe->prev = frame;
3583 else if (OP(scan) == EXACT) {
3584 I32 l = STR_LEN(scan);
3587 const U8 * const s = (U8*)STRING(scan);
3588 uc = utf8_to_uvchr_buf(s, s + l, NULL);
3589 l = utf8_length(s, s + l);
3591 uc = *((U8*)STRING(scan));
3594 if (flags & SCF_DO_SUBSTR) { /* Update longest substr. */
3595 /* The code below prefers earlier match for fixed
3596 offset, later match for variable offset. */
3597 if (data->last_end == -1) { /* Update the start info. */
3598 data->last_start_min = data->pos_min;
3599 data->last_start_max = is_inf
3600 ? I32_MAX : data->pos_min + data->pos_delta;
3602 sv_catpvn(data->last_found, STRING(scan), STR_LEN(scan));
3604 SvUTF8_on(data->last_found);
3606 SV * const sv = data->last_found;
3607 MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ?
3608 mg_find(sv, PERL_MAGIC_utf8) : NULL;
3609 if (mg && mg->mg_len >= 0)
3610 mg->mg_len += utf8_length((U8*)STRING(scan),
3611 (U8*)STRING(scan)+STR_LEN(scan));
3613 data->last_end = data->pos_min + l;
3614 data->pos_min += l; /* As in the first entry. */
3615 data->flags &= ~SF_BEFORE_EOL;
3617 if (flags & SCF_DO_STCLASS_AND) {
3618 /* Check whether it is compatible with what we know already! */
3622 /* If compatible, we or it in below. It is compatible if is
3623 * in the bitmp and either 1) its bit or its fold is set, or 2)
3624 * it's for a locale. Even if there isn't unicode semantics
3625 * here, at runtime there may be because of matching against a
3626 * utf8 string, so accept a possible false positive for
3627 * latin1-range folds */
3629 (!(data->start_class->flags & ANYOF_LOCALE)
3630 && !ANYOF_BITMAP_TEST(data->start_class, uc)
3631 && (!(data->start_class->flags & ANYOF_LOC_FOLD)
3632 || !ANYOF_BITMAP_TEST(data->start_class, PL_fold_latin1[uc])))
3637 ANYOF_CLASS_ZERO(data->start_class);
3638 ANYOF_BITMAP_ZERO(data->start_class);
3640 ANYOF_BITMAP_SET(data->start_class, uc);
3641 else if (uc >= 0x100) {
3644 /* Some Unicode code points fold to the Latin1 range; as
3645 * XXX temporary code, instead of figuring out if this is
3646 * one, just assume it is and set all the start class bits
3647 * that could be some such above 255 code point's fold
3648 * which will generate fals positives. As the code
3649 * elsewhere that does compute the fold settles down, it
3650 * can be extracted out and re-used here */
3651 for (i = 0; i < 256; i++){
3652 if (HAS_NONLATIN1_FOLD_CLOSURE(i)) {
3653 ANYOF_BITMAP_SET(data->start_class, i);
3657 CLEAR_SSC_EOS(data->start_class);
3659 data->start_class->flags &= ~ANYOF_UNICODE_ALL;
3661 else if (flags & SCF_DO_STCLASS_OR) {
3662 /* false positive possible if the class is case-folded */
3664 ANYOF_BITMAP_SET(data->start_class, uc);
3666 data->start_class->flags |= ANYOF_UNICODE_ALL;
3667 CLEAR_SSC_EOS(data->start_class);
3668 cl_and(data->start_class, and_withp);
3670 flags &= ~SCF_DO_STCLASS;
3672 else if (PL_regkind[OP(scan)] == EXACT) { /* But OP != EXACT! */
3673 I32 l = STR_LEN(scan);
3674 UV uc = *((U8*)STRING(scan));
3676 /* Search for fixed substrings supports EXACT only. */
3677 if (flags & SCF_DO_SUBSTR) {
3679 SCAN_COMMIT(pRExC_state, data, minlenp);
3682 const U8 * const s = (U8 *)STRING(scan);
3683 uc = utf8_to_uvchr_buf(s, s + l, NULL);
3684 l = utf8_length(s, s + l);
3686 if (has_exactf_sharp_s) {
3687 RExC_seen |= REG_SEEN_EXACTF_SHARP_S;
3689 min += l - min_subtract;
3691 delta += min_subtract;
3692 if (flags & SCF_DO_SUBSTR) {
3693 data->pos_min += l - min_subtract;
3694 if (data->pos_min < 0) {
3697 data->pos_delta += min_subtract;
3699 data->longest = &(data->longest_float);
3702 if (flags & SCF_DO_STCLASS_AND) {
3703 /* Check whether it is compatible with what we know already! */
3706 (!(data->start_class->flags & ANYOF_LOCALE)
3707 && !ANYOF_BITMAP_TEST(data->start_class, uc)
3708 && !ANYOF_BITMAP_TEST(data->start_class, PL_fold_latin1[uc])))
3712 ANYOF_CLASS_ZERO(data->start_class);
3713 ANYOF_BITMAP_ZERO(data->start_class);
3715 ANYOF_BITMAP_SET(data->start_class, uc);
3716 CLEAR_SSC_EOS(data->start_class);
3717 if (OP(scan) == EXACTFL) {
3718 /* XXX This set is probably no longer necessary, and
3719 * probably wrong as LOCALE now is on in the initial
3721 data->start_class->flags |= ANYOF_LOCALE|ANYOF_LOC_FOLD;
3725 /* Also set the other member of the fold pair. In case
3726 * that unicode semantics is called for at runtime, use
3727 * the full latin1 fold. (Can't do this for locale,
3728 * because not known until runtime) */
3729 ANYOF_BITMAP_SET(data->start_class, PL_fold_latin1[uc]);
3731 /* All other (EXACTFL handled above) folds except under
3732 * /iaa that include s, S, and sharp_s also may include
3734 if (OP(scan) != EXACTFA) {
3735 if (uc == 's' || uc == 'S') {
3736 ANYOF_BITMAP_SET(data->start_class,
3737 LATIN_SMALL_LETTER_SHARP_S);
3739 else if (uc == LATIN_SMALL_LETTER_SHARP_S) {
3740 ANYOF_BITMAP_SET(data->start_class, 's');
3741 ANYOF_BITMAP_SET(data->start_class, 'S');
3746 else if (uc >= 0x100) {
3748 for (i = 0; i < 256; i++){
3749 if (_HAS_NONLATIN1_FOLD_CLOSURE_ONLY_FOR_USE_BY_REGCOMP_DOT_C_AND_REGEXEC_DOT_C(i)) {
3750 ANYOF_BITMAP_SET(data->start_class, i);
3755 else if (flags & SCF_DO_STCLASS_OR) {
3756 if (data->start_class->flags & ANYOF_LOC_FOLD) {
3757 /* false positive possible if the class is case-folded.
3758 Assume that the locale settings are the same... */
3760 ANYOF_BITMAP_SET(data->start_class, uc);
3761 if (OP(scan) != EXACTFL) {
3763 /* And set the other member of the fold pair, but
3764 * can't do that in locale because not known until
3766 ANYOF_BITMAP_SET(data->start_class,
3767 PL_fold_latin1[uc]);
3769 /* All folds except under /iaa that include s, S,
3770 * and sharp_s also may include the others */
3771 if (OP(scan) != EXACTFA) {
3772 if (uc == 's' || uc == 'S') {
3773 ANYOF_BITMAP_SET(data->start_class,
3774 LATIN_SMALL_LETTER_SHARP_S);
3776 else if (uc == LATIN_SMALL_LETTER_SHARP_S) {
3777 ANYOF_BITMAP_SET(data->start_class, 's');
3778 ANYOF_BITMAP_SET(data->start_class, 'S');
3783 CLEAR_SSC_EOS(data->start_class);
3785 cl_and(data->start_class, and_withp);
3787 flags &= ~SCF_DO_STCLASS;
3789 else if (REGNODE_VARIES(OP(scan))) {
3790 I32 mincount, maxcount, minnext, deltanext, fl = 0;
3791 I32 f = flags, pos_before = 0;
3792 regnode * const oscan = scan;
3793 struct regnode_charclass_class this_class;
3794 struct regnode_charclass_class *oclass = NULL;
3795 I32 next_is_eval = 0;
3797 switch (PL_regkind[OP(scan)]) {
3798 case WHILEM: /* End of (?:...)* . */
3799 scan = NEXTOPER(scan);
3802 if (flags & (SCF_DO_SUBSTR | SCF_DO_STCLASS)) {
3803 next = NEXTOPER(scan);
3804 if (OP(next) == EXACT || (flags & SCF_DO_STCLASS)) {
3806 maxcount = REG_INFTY;
3807 next = regnext(scan);
3808 scan = NEXTOPER(scan);
3812 if (flags & SCF_DO_SUBSTR)
3817 if (flags & SCF_DO_STCLASS) {
3819 maxcount = REG_INFTY;
3820 next = regnext(scan);
3821 scan = NEXTOPER(scan);
3824 is_inf = is_inf_internal = 1;
3825 scan = regnext(scan);
3826 if (flags & SCF_DO_SUBSTR) {
3827 SCAN_COMMIT(pRExC_state, data, minlenp); /* Cannot extend fixed substrings */
3828 data->longest = &(data->longest_float);
3830 goto optimize_curly_tail;
3832 if (stopparen>0 && (OP(scan)==CURLYN || OP(scan)==CURLYM)
3833 && (scan->flags == stopparen))
3838 mincount = ARG1(scan);
3839 maxcount = ARG2(scan);
3841 next = regnext(scan);
3842 if (OP(scan) == CURLYX) {
3843 I32 lp = (data ? *(data->last_closep) : 0);
3844 scan->flags = ((lp <= (I32)U8_MAX) ? (U8)lp : U8_MAX);
3846 scan = NEXTOPER(scan) + EXTRA_STEP_2ARGS;
3847 next_is_eval = (OP(scan) == EVAL);
3849 if (flags & SCF_DO_SUBSTR) {
3850 if (mincount == 0) SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot extend fixed substrings */
3851 pos_before = data->pos_min;
3855 data->flags &= ~(SF_HAS_PAR|SF_IN_PAR|SF_HAS_EVAL);
3857 data->flags |= SF_IS_INF;
3859 if (flags & SCF_DO_STCLASS) {
3860 cl_init(pRExC_state, &this_class);
3861 oclass = data->start_class;
3862 data->start_class = &this_class;
3863 f |= SCF_DO_STCLASS_AND;
3864 f &= ~SCF_DO_STCLASS_OR;
3866 /* Exclude from super-linear cache processing any {n,m}
3867 regops for which the combination of input pos and regex
3868 pos is not enough information to determine if a match
3871 For example, in the regex /foo(bar\s*){4,8}baz/ with the
3872 regex pos at the \s*, the prospects for a match depend not
3873 only on the input position but also on how many (bar\s*)
3874 repeats into the {4,8} we are. */
3875 if ((mincount > 1) || (maxcount > 1 && maxcount != REG_INFTY))
3876 f &= ~SCF_WHILEM_VISITED_POS;
3878 /* This will finish on WHILEM, setting scan, or on NULL: */
3879 minnext = study_chunk(pRExC_state, &scan, minlenp, &deltanext,
3880 last, data, stopparen, recursed, NULL,
3882 ? (f & ~SCF_DO_SUBSTR) : f),depth+1);
3884 if (flags & SCF_DO_STCLASS)
3885 data->start_class = oclass;
3886 if (mincount == 0 || minnext == 0) {
3887 if (flags & SCF_DO_STCLASS_OR) {
3888 cl_or(pRExC_state, data->start_class, &this_class);
3890 else if (flags & SCF_DO_STCLASS_AND) {
3891 /* Switch to OR mode: cache the old value of
3892 * data->start_class */
3894 StructCopy(data->start_class, and_withp,
3895 struct regnode_charclass_class);
3896 flags &= ~SCF_DO_STCLASS_AND;
3897 StructCopy(&this_class, data->start_class,
3898 struct regnode_charclass_class);
3899 flags |= SCF_DO_STCLASS_OR;
3900 SET_SSC_EOS(data->start_class);
3902 } else { /* Non-zero len */
3903 if (flags & SCF_DO_STCLASS_OR) {
3904 cl_or(pRExC_state, data->start_class, &this_class);
3905 cl_and(data->start_class, and_withp);
3907 else if (flags & SCF_DO_STCLASS_AND)
3908 cl_and(data->start_class, &this_class);
3909 flags &= ~SCF_DO_STCLASS;
3911 if (!scan) /* It was not CURLYX, but CURLY. */
3913 if (!(flags & SCF_TRIE_DOING_RESTUDY)
3914 /* ? quantifier ok, except for (?{ ... }) */
3915 && (next_is_eval || !(mincount == 0 && maxcount == 1))
3916 && (minnext == 0) && (deltanext == 0)
3917 && data && !(data->flags & (SF_HAS_PAR|SF_IN_PAR))
3918 && maxcount <= REG_INFTY/3) /* Complement check for big count */
3920 /* Fatal warnings may leak the regexp without this: */
3921 SAVEFREESV(RExC_rx_sv);
3922 ckWARNreg(RExC_parse,
3923 "Quantifier unexpected on zero-length expression");
3924 (void)ReREFCNT_inc(RExC_rx_sv);
3927 min += minnext * mincount;
3928 is_inf_internal |= deltanext == I32_MAX
3929 || (maxcount == REG_INFTY && minnext + deltanext > 0);
3930 is_inf |= is_inf_internal;
3934 delta += (minnext + deltanext) * maxcount - minnext * mincount;
3936 /* Try powerful optimization CURLYX => CURLYN. */
3937 if ( OP(oscan) == CURLYX && data
3938 && data->flags & SF_IN_PAR
3939 && !(data->flags & SF_HAS_EVAL)
3940 && !deltanext && minnext == 1 ) {
3941 /* Try to optimize to CURLYN. */
3942 regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS;
3943 regnode * const nxt1 = nxt;
3950 if (!REGNODE_SIMPLE(OP(nxt))
3951 && !(PL_regkind[OP(nxt)] == EXACT
3952 && STR_LEN(nxt) == 1))
3958 if (OP(nxt) != CLOSE)
3960 if (RExC_open_parens) {
3961 RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/
3962 RExC_close_parens[ARG(nxt1)-1]=nxt+2; /*close->while*/
3964 /* Now we know that nxt2 is the only contents: */
3965 oscan->flags = (U8)ARG(nxt);
3967 OP(nxt1) = NOTHING; /* was OPEN. */
3970 OP(nxt1 + 1) = OPTIMIZED; /* was count. */
3971 NEXT_OFF(nxt1+ 1) = 0; /* just for consistency. */
3972 NEXT_OFF(nxt2) = 0; /* just for consistency with CURLY. */
3973 OP(nxt) = OPTIMIZED; /* was CLOSE. */
3974 OP(nxt + 1) = OPTIMIZED; /* was count. */
3975 NEXT_OFF(nxt+ 1) = 0; /* just for consistency. */
3980 /* Try optimization CURLYX => CURLYM. */
3981 if ( OP(oscan) == CURLYX && data
3982 && !(data->flags & SF_HAS_PAR)
3983 && !(data->flags & SF_HAS_EVAL)
3984 && !deltanext /* atom is fixed width */
3985 && minnext != 0 /* CURLYM can't handle zero width */
3986 && ! (RExC_seen & REG_SEEN_EXACTF_SHARP_S) /* Nor \xDF */
3988 /* XXXX How to optimize if data == 0? */
3989 /* Optimize to a simpler form. */
3990 regnode *nxt = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN */
3994 while ( (nxt2 = regnext(nxt)) /* skip over embedded stuff*/
3995 && (OP(nxt2) != WHILEM))
3997 OP(nxt2) = SUCCEED; /* Whas WHILEM */
3998 /* Need to optimize away parenths. */
3999 if ((data->flags & SF_IN_PAR) && OP(nxt) == CLOSE) {
4000 /* Set the parenth number. */
4001 regnode *nxt1 = NEXTOPER(oscan) + EXTRA_STEP_2ARGS; /* OPEN*/
4003 oscan->flags = (U8)ARG(nxt);
4004 if (RExC_open_parens) {
4005 RExC_open_parens[ARG(nxt1)-1]=oscan; /*open->CURLYM*/
4006 RExC_close_parens[ARG(nxt1)-1]=nxt2+1; /*close->NOTHING*/
4008 OP(nxt1) = OPTIMIZED; /* was OPEN. */
4009 OP(nxt) = OPTIMIZED; /* was CLOSE. */
4012 OP(nxt1 + 1) = OPTIMIZED; /* was count. */
4013 OP(nxt + 1) = OPTIMIZED; /* was count. */
4014 NEXT_OFF(nxt1 + 1) = 0; /* just for consistency. */
4015 NEXT_OFF(nxt + 1) = 0; /* just for consistency. */
4018 while ( nxt1 && (OP(nxt1) != WHILEM)) {
4019 regnode *nnxt = regnext(nxt1);
4021 if (reg_off_by_arg[OP(nxt1)])
4022 ARG_SET(nxt1, nxt2 - nxt1);
4023 else if (nxt2 - nxt1 < U16_MAX)
4024 NEXT_OFF(nxt1) = nxt2 - nxt1;
4026 OP(nxt) = NOTHING; /* Cannot beautify */
4031 /* Optimize again: */
4032 study_chunk(pRExC_state, &nxt1, minlenp, &deltanext, nxt,
4033 NULL, stopparen, recursed, NULL, 0,depth+1);
4038 else if ((OP(oscan) == CURLYX)
4039 && (flags & SCF_WHILEM_VISITED_POS)
4040 /* See the comment on a similar expression above.
4041 However, this time it's not a subexpression
4042 we care about, but the expression itself. */
4043 && (maxcount == REG_INFTY)
4044 && data && ++data->whilem_c < 16) {
4045 /* This stays as CURLYX, we can put the count/of pair. */
4046 /* Find WHILEM (as in regexec.c) */
4047 regnode *nxt = oscan + NEXT_OFF(oscan);
4049 if (OP(PREVOPER(nxt)) == NOTHING) /* LONGJMP */
4051 PREVOPER(nxt)->flags = (U8)(data->whilem_c
4052 | (RExC_whilem_seen << 4)); /* On WHILEM */
4054 if (data && fl & (SF_HAS_PAR|SF_IN_PAR))
4056 if (flags & SCF_DO_SUBSTR) {
4057 SV *last_str = NULL;
4058 int counted = mincount != 0;
4060 if (data->last_end > 0 && mincount != 0) { /* Ends with a string. */
4061 #if defined(SPARC64_GCC_WORKAROUND)
4064 const char *s = NULL;
4067 if (pos_before >= data->last_start_min)
4070 b = data->last_start_min;
4073 s = SvPV_const(data->last_found, l);
4074 old = b - data->last_start_min;
4077 I32 b = pos_before >= data->last_start_min
4078 ? pos_before : data->last_start_min;
4080 const char * const s = SvPV_const(data->last_found, l);
4081 I32 old = b - data->last_start_min;
4085 old = utf8_hop((U8*)s, old) - (U8*)s;
4087 /* Get the added string: */
4088 last_str = newSVpvn_utf8(s + old, l, UTF);
4089 if (deltanext == 0 && pos_before == b) {
4090 /* What was added is a constant string */
4092 SvGROW(last_str, (mincount * l) + 1);
4093 repeatcpy(SvPVX(last_str) + l,
4094 SvPVX_const(last_str), l, mincount - 1);
4095 SvCUR_set(last_str, SvCUR(last_str) * mincount);
4096 /* Add additional parts. */
4097 SvCUR_set(data->last_found,
4098 SvCUR(data->last_found) - l);
4099 sv_catsv(data->last_found, last_str);
4101 SV * sv = data->last_found;
4103 SvUTF8(sv) && SvMAGICAL(sv) ?
4104 mg_find(sv, PERL_MAGIC_utf8) : NULL;
4105 if (mg && mg->mg_len >= 0)
4106 mg->mg_len += CHR_SVLEN(last_str) - l;
4108 data->last_end += l * (mincount - 1);
4111 /* start offset must point into the last copy */
4112 data->last_start_min += minnext * (mincount - 1);
4113 data->last_start_max += is_inf ? I32_MAX
4114 : (maxcount - 1) * (minnext + data->pos_delta);
4117 /* It is counted once already... */
4118 data->pos_min += minnext * (mincount - counted);
4120 PerlIO_printf(Perl_debug_log, "counted=%d deltanext=%d I32_MAX=%d minnext=%d maxcount=%d mincount=%d\n",
4121 counted, deltanext, I32_MAX, minnext, maxcount, mincount);
4122 if (deltanext != I32_MAX)
4123 PerlIO_printf(Perl_debug_log, "LHS=%d RHS=%d\n", -counted * deltanext + (minnext + deltanext) * maxcount - minnext * mincount, I32_MAX - data->pos_delta);
4125 if (deltanext == I32_MAX || -counted * deltanext + (minnext + deltanext) * maxcount - minnext * mincount >= I32_MAX - data->pos_delta)
4126 data->pos_delta = I32_MAX;
4128 data->pos_delta += - counted * deltanext +
4129 (minnext + deltanext) * maxcount - minnext * mincount;
4130 if (mincount != maxcount) {
4131 /* Cannot extend fixed substrings found inside
4133 SCAN_COMMIT(pRExC_state,data,minlenp);
4134 if (mincount && last_str) {
4135 SV * const sv = data->last_found;
4136 MAGIC * const mg = SvUTF8(sv) && SvMAGICAL(sv) ?
4137 mg_find(sv, PERL_MAGIC_utf8) : NULL;
4141 sv_setsv(sv, last_str);
4142 data->last_end = data->pos_min;
4143 data->last_start_min =
4144 data->pos_min - CHR_SVLEN(last_str);
4145 data->last_start_max = is_inf
4147 : data->pos_min + data->pos_delta
4148 - CHR_SVLEN(last_str);
4150 data->longest = &(data->longest_float);
4152 SvREFCNT_dec(last_str);
4154 if (data && (fl & SF_HAS_EVAL))
4155 data->flags |= SF_HAS_EVAL;
4156 optimize_curly_tail:
4157 if (OP(oscan) != CURLYX) {
4158 while (PL_regkind[OP(next = regnext(oscan))] == NOTHING
4160 NEXT_OFF(oscan) += NEXT_OFF(next);
4163 default: /* REF, and CLUMP only? */
4164 if (flags & SCF_DO_SUBSTR) {
4165 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
4166 data->longest = &(data->longest_float);
4168 is_inf = is_inf_internal = 1;
4169 if (flags & SCF_DO_STCLASS_OR)
4170 cl_anything(pRExC_state, data->start_class);
4171 flags &= ~SCF_DO_STCLASS;
4175 else if (OP(scan) == LNBREAK) {
4176 if (flags & SCF_DO_STCLASS) {
4178 CLEAR_SSC_EOS(data->start_class); /* No match on empty */
4179 if (flags & SCF_DO_STCLASS_AND) {
4180 for (value = 0; value < 256; value++)
4181 if (!is_VERTWS_cp(value))
4182 ANYOF_BITMAP_CLEAR(data->start_class, value);
4185 for (value = 0; value < 256; value++)
4186 if (is_VERTWS_cp(value))
4187 ANYOF_BITMAP_SET(data->start_class, value);
4189 if (flags & SCF_DO_STCLASS_OR)
4190 cl_and(data->start_class, and_withp);
4191 flags &= ~SCF_DO_STCLASS;
4194 delta++; /* Because of the 2 char string cr-lf */
4195 if (flags & SCF_DO_SUBSTR) {
4196 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
4198 data->pos_delta += 1;
4199 data->longest = &(data->longest_float);
4202 else if (REGNODE_SIMPLE(OP(scan))) {
4205 if (flags & SCF_DO_SUBSTR) {
4206 SCAN_COMMIT(pRExC_state,data,minlenp);
4210 if (flags & SCF_DO_STCLASS) {
4212 CLEAR_SSC_EOS(data->start_class); /* No match on empty */
4214 /* Some of the logic below assumes that switching
4215 locale on will only add false positives. */
4216 switch (PL_regkind[OP(scan)]) {
4222 Perl_croak(aTHX_ "panic: unexpected simple REx opcode %d", OP(scan));
4225 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
4226 cl_anything(pRExC_state, data->start_class);
4229 if (OP(scan) == SANY)
4231 if (flags & SCF_DO_STCLASS_OR) { /* Everything but \n */
4232 value = (ANYOF_BITMAP_TEST(data->start_class,'\n')
4233 || ANYOF_CLASS_TEST_ANY_SET(data->start_class));
4234 cl_anything(pRExC_state, data->start_class);
4236 if (flags & SCF_DO_STCLASS_AND || !value)
4237 ANYOF_BITMAP_CLEAR(data->start_class,'\n');
4240 if (flags & SCF_DO_STCLASS_AND)
4241 cl_and(data->start_class,
4242 (struct regnode_charclass_class*)scan);
4244 cl_or(pRExC_state, data->start_class,
4245 (struct regnode_charclass_class*)scan);
4253 classnum = FLAGS(scan);
4254 if (flags & SCF_DO_STCLASS_AND) {
4255 if (!(data->start_class->flags & ANYOF_LOCALE)) {
4256 ANYOF_CLASS_CLEAR(data->start_class, classnum_to_namedclass(classnum) + 1);
4257 for (value = 0; value < loop_max; value++) {
4258 if (! _generic_isCC(UNI_TO_NATIVE(value), classnum)) {
4259 ANYOF_BITMAP_CLEAR(data->start_class, UNI_TO_NATIVE(value));
4265 if (data->start_class->flags & ANYOF_LOCALE) {
4266 ANYOF_CLASS_SET(data->start_class, classnum_to_namedclass(classnum));
4270 /* Even if under locale, set the bits for non-locale
4271 * in case it isn't a true locale-node. This will
4272 * create false positives if it truly is locale */
4273 for (value = 0; value < loop_max; value++) {
4274 if (_generic_isCC(UNI_TO_NATIVE(value), classnum)) {
4275 ANYOF_BITMAP_SET(data->start_class, UNI_TO_NATIVE(value));
4287 classnum = FLAGS(scan);
4288 if (flags & SCF_DO_STCLASS_AND) {
4289 if (!(data->start_class->flags & ANYOF_LOCALE)) {
4290 ANYOF_CLASS_CLEAR(data->start_class, classnum_to_namedclass(classnum));
4291 for (value = 0; value < loop_max; value++) {
4292 if (_generic_isCC(UNI_TO_NATIVE(value), classnum)) {
4293 ANYOF_BITMAP_CLEAR(data->start_class, UNI_TO_NATIVE(value));
4299 if (data->start_class->flags & ANYOF_LOCALE) {
4300 ANYOF_CLASS_SET(data->start_class, classnum_to_namedclass(classnum) + 1);
4304 /* Even if under locale, set the bits for non-locale in
4305 * case it isn't a true locale-node. This will create
4306 * false positives if it truly is locale */
4307 for (value = 0; value < loop_max; value++) {
4308 if (! _generic_isCC(UNI_TO_NATIVE(value), classnum)) {
4309 ANYOF_BITMAP_SET(data->start_class, UNI_TO_NATIVE(value));
4312 if (PL_regkind[OP(scan)] == NPOSIXD) {
4313 data->start_class->flags |= ANYOF_NON_UTF8_LATIN1_ALL;
4319 if (flags & SCF_DO_STCLASS_OR)
4320 cl_and(data->start_class, and_withp);
4321 flags &= ~SCF_DO_STCLASS;
4324 else if (PL_regkind[OP(scan)] == EOL && flags & SCF_DO_SUBSTR) {
4325 data->flags |= (OP(scan) == MEOL
4328 SCAN_COMMIT(pRExC_state, data, minlenp);
4331 else if ( PL_regkind[OP(scan)] == BRANCHJ
4332 /* Lookbehind, or need to calculate parens/evals/stclass: */
4333 && (scan->flags || data || (flags & SCF_DO_STCLASS))
4334 && (OP(scan) == IFMATCH || OP(scan) == UNLESSM)) {
4335 if ( OP(scan) == UNLESSM &&
4337 OP(NEXTOPER(NEXTOPER(scan))) == NOTHING &&
4338 OP(regnext(NEXTOPER(NEXTOPER(scan)))) == SUCCEED
4341 regnode *upto= regnext(scan);
4343 SV * const mysv_val=sv_newmortal();
4344 DEBUG_STUDYDATA("OPFAIL",data,depth);
4346 /*DEBUG_PARSE_MSG("opfail");*/
4347 regprop(RExC_rx, mysv_val, upto);
4348 PerlIO_printf(Perl_debug_log, "~ replace with OPFAIL pointed at %s (%"IVdf") offset %"IVdf"\n",
4349 SvPV_nolen_const(mysv_val),
4350 (IV)REG_NODE_NUM(upto),
4355 NEXT_OFF(scan) = upto - scan;
4356 for (opt= scan + 1; opt < upto ; opt++)
4357 OP(opt) = OPTIMIZED;
4361 if ( !PERL_ENABLE_POSITIVE_ASSERTION_STUDY
4362 || OP(scan) == UNLESSM )
4364 /* Negative Lookahead/lookbehind
4365 In this case we can't do fixed string optimisation.
4368 I32 deltanext, minnext, fake = 0;
4370 struct regnode_charclass_class intrnl;
4373 data_fake.flags = 0;
4375 data_fake.whilem_c = data->whilem_c;
4376 data_fake.last_closep = data->last_closep;
4379 data_fake.last_closep = &fake;
4380 data_fake.pos_delta = delta;
4381 if ( flags & SCF_DO_STCLASS && !scan->flags
4382 && OP(scan) == IFMATCH ) { /* Lookahead */
4383 cl_init(pRExC_state, &intrnl);
4384 data_fake.start_class = &intrnl;
4385 f |= SCF_DO_STCLASS_AND;
4387 if (flags & SCF_WHILEM_VISITED_POS)
4388 f |= SCF_WHILEM_VISITED_POS;
4389 next = regnext(scan);
4390 nscan = NEXTOPER(NEXTOPER(scan));
4391 minnext = study_chunk(pRExC_state, &nscan, minlenp, &deltanext,
4392 last, &data_fake, stopparen, recursed, NULL, f, depth+1);
4395 FAIL("Variable length lookbehind not implemented");
4397 else if (minnext > (I32)U8_MAX) {
4398 FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX);
4400 scan->flags = (U8)minnext;
4403 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
4405 if (data_fake.flags & SF_HAS_EVAL)
4406 data->flags |= SF_HAS_EVAL;
4407 data->whilem_c = data_fake.whilem_c;
4409 if (f & SCF_DO_STCLASS_AND) {
4410 if (flags & SCF_DO_STCLASS_OR) {
4411 /* OR before, AND after: ideally we would recurse with
4412 * data_fake to get the AND applied by study of the
4413 * remainder of the pattern, and then derecurse;
4414 * *** HACK *** for now just treat as "no information".
4415 * See [perl #56690].
4417 cl_init(pRExC_state, data->start_class);
4419 /* AND before and after: combine and continue */
4420 const int was = TEST_SSC_EOS(data->start_class);
4422 cl_and(data->start_class, &intrnl);
4424 SET_SSC_EOS(data->start_class);
4428 #if PERL_ENABLE_POSITIVE_ASSERTION_STUDY
4430 /* Positive Lookahead/lookbehind
4431 In this case we can do fixed string optimisation,
4432 but we must be careful about it. Note in the case of
4433 lookbehind the positions will be offset by the minimum
4434 length of the pattern, something we won't know about
4435 until after the recurse.
4437 I32 deltanext, fake = 0;
4439 struct regnode_charclass_class intrnl;
4441 /* We use SAVEFREEPV so that when the full compile
4442 is finished perl will clean up the allocated
4443 minlens when it's all done. This way we don't
4444 have to worry about freeing them when we know
4445 they wont be used, which would be a pain.
4448 Newx( minnextp, 1, I32 );
4449 SAVEFREEPV(minnextp);
4452 StructCopy(data, &data_fake, scan_data_t);
4453 if ((flags & SCF_DO_SUBSTR) && data->last_found) {
4456 SCAN_COMMIT(pRExC_state, &data_fake,minlenp);
4457 data_fake.last_found=newSVsv(data->last_found);
4461 data_fake.last_closep = &fake;
4462 data_fake.flags = 0;
4463 data_fake.pos_delta = delta;
4465 data_fake.flags |= SF_IS_INF;
4466 if ( flags & SCF_DO_STCLASS && !scan->flags
4467 && OP(scan) == IFMATCH ) { /* Lookahead */
4468 cl_init(pRExC_state, &intrnl);
4469 data_fake.start_class = &intrnl;
4470 f |= SCF_DO_STCLASS_AND;
4472 if (flags & SCF_WHILEM_VISITED_POS)
4473 f |= SCF_WHILEM_VISITED_POS;
4474 next = regnext(scan);
4475 nscan = NEXTOPER(NEXTOPER(scan));
4477 *minnextp = study_chunk(pRExC_state, &nscan, minnextp, &deltanext,
4478 last, &data_fake, stopparen, recursed, NULL, f,depth+1);
4481 FAIL("Variable length lookbehind not implemented");
4483 else if (*minnextp > (I32)U8_MAX) {
4484 FAIL2("Lookbehind longer than %"UVuf" not implemented", (UV)U8_MAX);
4486 scan->flags = (U8)*minnextp;
4491 if (f & SCF_DO_STCLASS_AND) {
4492 const int was = TEST_SSC_EOS(data.start_class);
4494 cl_and(data->start_class, &intrnl);
4496 SET_SSC_EOS(data->start_class);
4499 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
4501 if (data_fake.flags & SF_HAS_EVAL)
4502 data->flags |= SF_HAS_EVAL;
4503 data->whilem_c = data_fake.whilem_c;
4504 if ((flags & SCF_DO_SUBSTR) && data_fake.last_found) {
4505 if (RExC_rx->minlen<*minnextp)
4506 RExC_rx->minlen=*minnextp;
4507 SCAN_COMMIT(pRExC_state, &data_fake, minnextp);
4508 SvREFCNT_dec_NN(data_fake.last_found);
4510 if ( data_fake.minlen_fixed != minlenp )
4512 data->offset_fixed= data_fake.offset_fixed;
4513 data->minlen_fixed= data_fake.minlen_fixed;
4514 data->lookbehind_fixed+= scan->flags;
4516 if ( data_fake.minlen_float != minlenp )
4518 data->minlen_float= data_fake.minlen_float;
4519 data->offset_float_min=data_fake.offset_float_min;
4520 data->offset_float_max=data_fake.offset_float_max;
4521 data->lookbehind_float+= scan->flags;
4528 else if (OP(scan) == OPEN) {
4529 if (stopparen != (I32)ARG(scan))
4532 else if (OP(scan) == CLOSE) {
4533 if (stopparen == (I32)ARG(scan)) {
4536 if ((I32)ARG(scan) == is_par) {
4537 next = regnext(scan);
4539 if ( next && (OP(next) != WHILEM) && next < last)
4540 is_par = 0; /* Disable optimization */
4543 *(data->last_closep) = ARG(scan);
4545 else if (OP(scan) == EVAL) {
4547 data->flags |= SF_HAS_EVAL;
4549 else if ( PL_regkind[OP(scan)] == ENDLIKE ) {
4550 if (flags & SCF_DO_SUBSTR) {
4551 SCAN_COMMIT(pRExC_state,data,minlenp);
4552 flags &= ~SCF_DO_SUBSTR;
4554 if (data && OP(scan)==ACCEPT) {
4555 data->flags |= SCF_SEEN_ACCEPT;
4560 else if (OP(scan) == LOGICAL && scan->flags == 2) /* Embedded follows */
4562 if (flags & SCF_DO_SUBSTR) {
4563 SCAN_COMMIT(pRExC_state,data,minlenp);
4564 data->longest = &(data->longest_float);
4566 is_inf = is_inf_internal = 1;
4567 if (flags & SCF_DO_STCLASS_OR) /* Allow everything */
4568 cl_anything(pRExC_state, data->start_class);
4569 flags &= ~SCF_DO_STCLASS;
4571 else if (OP(scan) == GPOS) {
4572 if (!(RExC_rx->extflags & RXf_GPOS_FLOAT) &&
4573 !(delta || is_inf || (data && data->pos_delta)))
4575 if (!(RExC_rx->extflags & RXf_ANCH) && (flags & SCF_DO_SUBSTR))
4576 RExC_rx->extflags |= RXf_ANCH_GPOS;
4577 if (RExC_rx->gofs < (U32)min)
4578 RExC_rx->gofs = min;
4580 RExC_rx->extflags |= RXf_GPOS_FLOAT;
4584 #ifdef TRIE_STUDY_OPT
4585 #ifdef FULL_TRIE_STUDY
4586 else if (PL_regkind[OP(scan)] == TRIE) {
4587 /* NOTE - There is similar code to this block above for handling
4588 BRANCH nodes on the initial study. If you change stuff here
4590 regnode *trie_node= scan;
4591 regnode *tail= regnext(scan);
4592 reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ];
4593 I32 max1 = 0, min1 = I32_MAX;
4594 struct regnode_charclass_class accum;
4596 if (flags & SCF_DO_SUBSTR) /* XXXX Add !SUSPEND? */
4597 SCAN_COMMIT(pRExC_state, data,minlenp); /* Cannot merge strings after this. */
4598 if (flags & SCF_DO_STCLASS)
4599 cl_init_zero(pRExC_state, &accum);
4605 const regnode *nextbranch= NULL;
4608 for ( word=1 ; word <= trie->wordcount ; word++)
4610 I32 deltanext=0, minnext=0, f = 0, fake;
4611 struct regnode_charclass_class this_class;
4613 data_fake.flags = 0;
4615 data_fake.whilem_c = data->whilem_c;
4616 data_fake.last_closep = data->last_closep;
4619 data_fake.last_closep = &fake;
4620 data_fake.pos_delta = delta;
4621 if (flags & SCF_DO_STCLASS) {
4622 cl_init(pRExC_state, &this_class);
4623 data_fake.start_class = &this_class;
4624 f = SCF_DO_STCLASS_AND;
4626 if (flags & SCF_WHILEM_VISITED_POS)
4627 f |= SCF_WHILEM_VISITED_POS;
4629 if (trie->jump[word]) {
4631 nextbranch = trie_node + trie->jump[0];
4632 scan= trie_node + trie->jump[word];
4633 /* We go from the jump point to the branch that follows
4634 it. Note this means we need the vestigal unused branches
4635 even though they arent otherwise used.
4637 minnext = study_chunk(pRExC_state, &scan, minlenp,
4638 &deltanext, (regnode *)nextbranch, &data_fake,
4639 stopparen, recursed, NULL, f,depth+1);
4641 if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH)
4642 nextbranch= regnext((regnode*)nextbranch);
4644 if (min1 > (I32)(minnext + trie->minlen))
4645 min1 = minnext + trie->minlen;
4646 if (deltanext == I32_MAX) {
4647 is_inf = is_inf_internal = 1;
4649 } else if (max1 < (I32)(minnext + deltanext + trie->maxlen))
4650 max1 = minnext + deltanext + trie->maxlen;
4652 if (data_fake.flags & (SF_HAS_PAR|SF_IN_PAR))
4654 if (data_fake.flags & SCF_SEEN_ACCEPT) {
4655 if ( stopmin > min + min1)
4656 stopmin = min + min1;
4657 flags &= ~SCF_DO_SUBSTR;
4659 data->flags |= SCF_SEEN_ACCEPT;
4662 if (data_fake.flags & SF_HAS_EVAL)
4663 data->flags |= SF_HAS_EVAL;
4664 data->whilem_c = data_fake.whilem_c;
4666 if (flags & SCF_DO_STCLASS)
4667 cl_or(pRExC_state, &accum, &this_class);
4670 if (flags & SCF_DO_SUBSTR) {
4671 data->pos_min += min1;
4672 data->pos_delta += max1 - min1;
4673 if (max1 != min1 || is_inf)
4674 data->longest = &(data->longest_float);
4677 delta += max1 - min1;
4678 if (flags & SCF_DO_STCLASS_OR) {
4679 cl_or(pRExC_state, data->start_class, &accum);
4681 cl_and(data->start_class, and_withp);
4682 flags &= ~SCF_DO_STCLASS;
4685 else if (flags & SCF_DO_STCLASS_AND) {
4687 cl_and(data->start_class, &accum);
4688 flags &= ~SCF_DO_STCLASS;
4691 /* Switch to OR mode: cache the old value of
4692 * data->start_class */
4694 StructCopy(data->start_class, and_withp,
4695 struct regnode_charclass_class);
4696 flags &= ~SCF_DO_STCLASS_AND;
4697 StructCopy(&accum, data->start_class,
4698 struct regnode_charclass_class);
4699 flags |= SCF_DO_STCLASS_OR;
4700 SET_SSC_EOS(data->start_class);
4707 else if (PL_regkind[OP(scan)] == TRIE) {
4708 reg_trie_data *trie = (reg_trie_data*)RExC_rxi->data->data[ ARG(scan) ];
4711 min += trie->minlen;
4712 delta += (trie->maxlen - trie->minlen);
4713 flags &= ~SCF_DO_STCLASS; /* xxx */
4714 if (flags & SCF_DO_SUBSTR) {
4715 SCAN_COMMIT(pRExC_state,data,minlenp); /* Cannot expect anything... */
4716 data->pos_min += trie->minlen;
4717 data->pos_delta += (trie->maxlen - trie->minlen);
4718 if (trie->maxlen != trie->minlen)
4719 data->longest = &(data->longest_float);
4721 if (trie->jump) /* no more substrings -- for now /grr*/
4722 flags &= ~SCF_DO_SUBSTR;
4724 #endif /* old or new */
4725 #endif /* TRIE_STUDY_OPT */
4727 /* Else: zero-length, ignore. */
4728 scan = regnext(scan);
4733 stopparen = frame->stop;
4734 frame = frame->prev;
4735 goto fake_study_recurse;
4740 DEBUG_STUDYDATA("pre-fin:",data,depth);
4743 *deltap = is_inf_internal ? I32_MAX : delta;
4744 if (flags & SCF_DO_SUBSTR && is_inf)
4745 data->pos_delta = I32_MAX - data->pos_min;
4746 if (is_par > (I32)U8_MAX)
4748 if (is_par && pars==1 && data) {
4749 data->flags |= SF_IN_PAR;
4750 data->flags &= ~SF_HAS_PAR;
4752 else if (pars && data) {
4753 data->flags |= SF_HAS_PAR;
4754 data->flags &= ~SF_IN_PAR;
4756 if (flags & SCF_DO_STCLASS_OR)
4757 cl_and(data->start_class, and_withp);
4758 if (flags & SCF_TRIE_RESTUDY)
4759 data->flags |= SCF_TRIE_RESTUDY;
4761 DEBUG_STUDYDATA("post-fin:",data,depth);
4763 return min < stopmin ? min : stopmin;
4767 S_add_data(RExC_state_t *pRExC_state, U32 n, const char *s)
4769 U32 count = RExC_rxi->data ? RExC_rxi->data->count : 0;
4771 PERL_ARGS_ASSERT_ADD_DATA;
4773 Renewc(RExC_rxi->data,
4774 sizeof(*RExC_rxi->data) + sizeof(void*) * (count + n - 1),
4775 char, struct reg_data);
4777 Renew(RExC_rxi->data->what, count + n, U8);
4779 Newx(RExC_rxi->data->what, n, U8);
4780 RExC_rxi->data->count = count + n;
4781 Copy(s, RExC_rxi->data->what + count, n, U8);
4785 /*XXX: todo make this not included in a non debugging perl */
4786 #ifndef PERL_IN_XSUB_RE
4788 Perl_reginitcolors(pTHX)
4791 const char * const s = PerlEnv_getenv("PERL_RE_COLORS");
4793 char *t = savepv(s);
4797 t = strchr(t, '\t');
4803 PL_colors[i] = t = (char *)"";
4808 PL_colors[i++] = (char *)"";
4815 #ifdef TRIE_STUDY_OPT
4816 #define CHECK_RESTUDY_GOTO_butfirst(dOsomething) \
4819 (data.flags & SCF_TRIE_RESTUDY) \
4827 #define CHECK_RESTUDY_GOTO_butfirst
4831 * pregcomp - compile a regular expression into internal code
4833 * Decides which engine's compiler to call based on the hint currently in
4837 #ifndef PERL_IN_XSUB_RE
4839 /* return the currently in-scope regex engine (or the default if none) */
4841 regexp_engine const *
4842 Perl_current_re_engine(pTHX)
4846 if (IN_PERL_COMPILETIME) {
4847 HV * const table = GvHV(PL_hintgv);
4851 return &PL_core_reg_engine;
4852 ptr = hv_fetchs(table, "regcomp", FALSE);
4853 if ( !(ptr && SvIOK(*ptr) && SvIV(*ptr)))
4854 return &PL_core_reg_engine;
4855 return INT2PTR(regexp_engine*,SvIV(*ptr));
4859 if (!PL_curcop->cop_hints_hash)
4860 return &PL_core_reg_engine;
4861 ptr = cop_hints_fetch_pvs(PL_curcop, "regcomp", 0);
4862 if ( !(ptr && SvIOK(ptr) && SvIV(ptr)))
4863 return &PL_core_reg_engine;
4864 return INT2PTR(regexp_engine*,SvIV(ptr));
4870 Perl_pregcomp(pTHX_ SV * const pattern, const U32 flags)
4873 regexp_engine const *eng = current_re_engine();
4874 GET_RE_DEBUG_FLAGS_DECL;
4876 PERL_ARGS_ASSERT_PREGCOMP;
4878 /* Dispatch a request to compile a regexp to correct regexp engine. */
4880 PerlIO_printf(Perl_debug_log, "Using engine %"UVxf"\n",
4883 return CALLREGCOMP_ENG(eng, pattern, flags);
4887 /* public(ish) entry point for the perl core's own regex compiling code.
4888 * It's actually a wrapper for Perl_re_op_compile that only takes an SV
4889 * pattern rather than a list of OPs, and uses the internal engine rather
4890 * than the current one */
4893 Perl_re_compile(pTHX_ SV * const pattern, U32 rx_flags)
4895 SV *pat = pattern; /* defeat constness! */
4896 PERL_ARGS_ASSERT_RE_COMPILE;
4897 return Perl_re_op_compile(aTHX_ &pat, 1, NULL,
4898 #ifdef PERL_IN_XSUB_RE
4901 &PL_core_reg_engine,
4903 NULL, NULL, rx_flags, 0);
4907 /* upgrade pattern pat_p of length plen_p to UTF8, and if there are code
4908 * blocks, recalculate the indices. Update pat_p and plen_p in-place to
4909 * point to the realloced string and length.
4911 * This is essentially a copy of Perl_bytes_to_utf8() with the code index
4915 S_pat_upgrade_to_utf8(pTHX_ RExC_state_t * const pRExC_state,
4916 char **pat_p, STRLEN *plen_p, int num_code_blocks)
4918 U8 *const src = (U8*)*pat_p;
4921 STRLEN s = 0, d = 0;
4923 GET_RE_DEBUG_FLAGS_DECL;
4925 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log,
4926 "UTF8 mismatch! Converting to utf8 for resizing and compile\n"));
4928 Newx(dst, *plen_p * 2 + 1, U8);
4930 while (s < *plen_p) {
4931 const UV uv = NATIVE_TO_ASCII(src[s]);
4932 if (UNI_IS_INVARIANT(uv))
4933 dst[d] = (U8)UTF_TO_NATIVE(uv);
4935 dst[d++] = (U8)UTF8_EIGHT_BIT_HI(uv);
4936 dst[d] = (U8)UTF8_EIGHT_BIT_LO(uv);
4938 if (n < num_code_blocks) {
4939 if (!do_end && pRExC_state->code_blocks[n].start == s) {
4940 pRExC_state->code_blocks[n].start = d;
4941 assert(dst[d] == '(');
4944 else if (do_end && pRExC_state->code_blocks[n].end == s) {
4945 pRExC_state->code_blocks[n].end = d;
4946 assert(dst[d] == ')');
4956 *pat_p = (char*) dst;
4958 RExC_orig_utf8 = RExC_utf8 = 1;
4963 /* S_concat_pat(): concatenate a list of args to the pattern string pat,
4964 * while recording any code block indices, and handling overloading,
4965 * nested qr// objects etc. If pat is null, it will allocate a new
4966 * string, or just return the first arg, if there's only one.
4968 * Returns the malloced/updated pat.
4969 * patternp and pat_count is the array of SVs to be concatted;
4970 * oplist is the optional list of ops that generated the SVs;
4971 * recompile_p is a pointer to a boolean that will be set if
4972 * the regex will need to be recompiled.
4973 * delim, if non-null is an SV that will be inserted between each element
4977 S_concat_pat(pTHX_ RExC_state_t * const pRExC_state,
4978 SV *pat, SV ** const patternp, int pat_count,
4979 OP *oplist, bool *recompile_p, SV *delim)
4983 bool use_delim = FALSE;
4984 bool alloced = FALSE;
4986 /* if we know we have at least two args, create an empty string,
4987 * then concatenate args to that. For no args, return an empty string */
4988 if (!pat && pat_count != 1) {
4989 pat = newSVpvn("", 0);
4994 for (svp = patternp; svp < patternp + pat_count; svp++) {
4997 STRLEN orig_patlen = 0;
4999 SV *msv = use_delim ? delim : *svp;
5001 /* if we've got a delimiter, we go round the loop twice for each
5002 * svp slot (except the last), using the delimiter the second
5011 if (SvTYPE(msv) == SVt_PVAV) {
5012 /* we've encountered an interpolated array within
5013 * the pattern, e.g. /...@a..../. Expand the list of elements,
5014 * then recursively append elements.
5015 * The code in this block is based on S_pushav() */
5017 AV *const av = (AV*)msv;
5018 const I32 maxarg = AvFILL(av) + 1;
5022 assert(oplist->op_type == OP_PADAV
5023 || oplist->op_type == OP_RV2AV);
5024 oplist = oplist->op_sibling;;
5027 if (SvRMAGICAL(av)) {
5030 Newx(array, maxarg, SV*);
5032 for (i=0; i < (U32)maxarg; i++) {
5033 SV ** const svp = av_fetch(av, i, FALSE);
5034 array[i] = svp ? *svp : &PL_sv_undef;
5038 array = AvARRAY(av);
5040 pat = S_concat_pat(aTHX_ pRExC_state, pat,
5041 array, maxarg, NULL, recompile_p,
5043 GvSV((gv_fetchpvs("\"", GV_ADDMULTI, SVt_PV))));
5049 /* we make the assumption here that each op in the list of
5050 * op_siblings maps to one SV pushed onto the stack,
5051 * except for code blocks, with have both an OP_NULL and
5053 * This allows us to match up the list of SVs against the
5054 * list of OPs to find the next code block.
5056 * Note that PUSHMARK PADSV PADSV ..
5058 * PADRANGE PADSV PADSV ..
5059 * so the alignment still works. */
5062 if (oplist->op_type == OP_NULL
5063 && (oplist->op_flags & OPf_SPECIAL))
5065 assert(n < pRExC_state->num_code_blocks);
5066 pRExC_state->code_blocks[n].start = pat ? SvCUR(pat) : 0;
5067 pRExC_state->code_blocks[n].block = oplist;
5068 pRExC_state->code_blocks[n].src_regex = NULL;
5071 oplist = oplist->op_sibling; /* skip CONST */
5074 oplist = oplist->op_sibling;;
5077 /* apply magic and QR overloading to arg */
5080 if (SvROK(msv) && SvAMAGIC(msv)) {
5081 SV *sv = AMG_CALLunary(msv, regexp_amg);
5085 if (SvTYPE(sv) != SVt_REGEXP)
5086 Perl_croak(aTHX_ "Overloaded qr did not return a REGEXP");
5091 /* try concatenation overload ... */
5092 if (pat && (SvAMAGIC(pat) || SvAMAGIC(msv)) &&
5093 (sv = amagic_call(pat, msv, concat_amg, AMGf_assign)))
5096 /* overloading involved: all bets are off over literal
5097 * code. Pretend we haven't seen it */
5098 pRExC_state->num_code_blocks -= n;
5102 /* ... or failing that, try "" overload */
5103 while (SvAMAGIC(msv)
5104 && (sv = AMG_CALLunary(msv, string_amg))
5108 && SvRV(msv) == SvRV(sv))
5113 if (SvROK(msv) && SvTYPE(SvRV(msv)) == SVt_REGEXP)
5117 /* this is a partially unrolled
5118 * sv_catsv_nomg(pat, msv);
5119 * that allows us to adjust code block indices if
5122 char *dst = SvPV_force_nomg(pat, dlen);
5124 if (SvUTF8(msv) && !SvUTF8(pat)) {
5125 S_pat_upgrade_to_utf8(aTHX_ pRExC_state, &dst, &dlen, n);
5126 sv_setpvn(pat, dst, dlen);
5129 sv_catsv_nomg(pat, msv);
5136 pRExC_state->code_blocks[n-1].end = SvCUR(pat)-1;
5139 /* extract any code blocks within any embedded qr//'s */
5140 if (rx && SvTYPE(rx) == SVt_REGEXP
5141 && RX_ENGINE((REGEXP*)rx)->op_comp)
5144 RXi_GET_DECL(ReANY((REGEXP *)rx), ri);
5145 if (ri->num_code_blocks) {
5147 /* the presence of an embedded qr// with code means
5148 * we should always recompile: the text of the
5149 * qr// may not have changed, but it may be a
5150 * different closure than last time */
5152 Renew(pRExC_state->code_blocks,
5153 pRExC_state->num_code_blocks + ri->num_code_blocks,
5154 struct reg_code_block);
5155 pRExC_state->num_code_blocks += ri->num_code_blocks;
5157 for (i=0; i < ri->num_code_blocks; i++) {
5158 struct reg_code_block *src, *dst;
5159 STRLEN offset = orig_patlen
5160 + ReANY((REGEXP *)rx)->pre_prefix;
5161 assert(n < pRExC_state->num_code_blocks);
5162 src = &ri->code_blocks[i];
5163 dst = &pRExC_state->code_blocks[n];
5164 dst->start = src->start + offset;
5165 dst->end = src->end + offset;
5166 dst->block = src->block;
5167 dst->src_regex = (REGEXP*) SvREFCNT_inc( (SV*)
5176 /* avoid calling magic multiple times on a single element e.g. =~ $qr */
5185 /* see if there are any run-time code blocks in the pattern.
5186 * False positives are allowed */
5189 S_has_runtime_code(pTHX_ RExC_state_t * const pRExC_state,
5190 char *pat, STRLEN plen)
5195 for (s = 0; s < plen; s++) {
5196 if (n < pRExC_state->num_code_blocks
5197 && s == pRExC_state->code_blocks[n].start)
5199 s = pRExC_state->code_blocks[n].end;
5203 /* TODO ideally should handle [..], (#..), /#.../x to reduce false
5205 if (pat[s] == '(' && s+2 <= plen && pat[s+1] == '?' &&
5207 || (s + 2 <= plen && pat[s+2] == '?' && pat[s+3] == '{'))
5214 /* Handle run-time code blocks. We will already have compiled any direct
5215 * or indirect literal code blocks. Now, take the pattern 'pat' and make a
5216 * copy of it, but with any literal code blocks blanked out and
5217 * appropriate chars escaped; then feed it into
5219 * eval "qr'modified_pattern'"
5223 * a\bc(?{"this was literal"})def'ghi\\jkl(?{"this is runtime"})mno
5227 * qr'a\\bc_______________________def\'ghi\\\\jkl(?{"this is runtime"})mno'
5229 * After eval_sv()-ing that, grab any new code blocks from the returned qr
5230 * and merge them with any code blocks of the original regexp.
5232 * If the pat is non-UTF8, while the evalled qr is UTF8, don't merge;
5233 * instead, just save the qr and return FALSE; this tells our caller that
5234 * the original pattern needs upgrading to utf8.
5238 S_compile_runtime_code(pTHX_ RExC_state_t * const pRExC_state,
5239 char *pat, STRLEN plen)
5243 GET_RE_DEBUG_FLAGS_DECL;
5245 if (pRExC_state->runtime_code_qr) {
5246 /* this is the second time we've been called; this should
5247 * only happen if the main pattern got upgraded to utf8
5248 * during compilation; re-use the qr we compiled first time
5249 * round (which should be utf8 too)
5251 qr = pRExC_state->runtime_code_qr;
5252 pRExC_state->runtime_code_qr = NULL;
5253 assert(RExC_utf8 && SvUTF8(qr));
5259 int newlen = plen + 6; /* allow for "qr''x\0" extra chars */
5263 /* determine how many extra chars we need for ' and \ escaping */
5264 for (s = 0; s < plen; s++) {
5265 if (pat[s] == '\'' || pat[s] == '\\')
5269 Newx(newpat, newlen, char);
5271 *p++ = 'q'; *p++ = 'r'; *p++ = '\'';
5273 for (s = 0; s < plen; s++) {
5274 if (n < pRExC_state->num_code_blocks
5275 && s == pRExC_state->code_blocks[n].start)
5277 /* blank out literal code block */
5278 assert(pat[s] == '(');
5279 while (s <= pRExC_state->code_blocks[n].end) {
5287 if (pat[s] == '\'' || pat[s] == '\\')
5292 if (pRExC_state->pm_flags & RXf_PMf_EXTENDED)
5296 PerlIO_printf(Perl_debug_log,
5297 "%sre-parsing pattern for runtime code:%s %s\n",
5298 PL_colors[4],PL_colors[5],newpat);
5301 sv = newSVpvn_flags(newpat, p-newpat-1, RExC_utf8 ? SVf_UTF8 : 0);
5307 PUSHSTACKi(PERLSI_REQUIRE);
5308 /* G_RE_REPARSING causes the toker to collapse \\ into \ when
5309 * parsing qr''; normally only q'' does this. It also alters
5311 eval_sv(sv, G_SCALAR|G_RE_REPARSING);
5312 SvREFCNT_dec_NN(sv);
5317 SV * const errsv = ERRSV;
5318 if (SvTRUE_NN(errsv))
5320 Safefree(pRExC_state->code_blocks);
5321 /* use croak_sv ? */
5322 Perl_croak_nocontext("%s", SvPV_nolen_const(errsv));
5325 assert(SvROK(qr_ref));
5327 assert(SvTYPE(qr) == SVt_REGEXP && RX_ENGINE((REGEXP*)qr)->op_comp);
5328 /* the leaving below frees the tmp qr_ref.
5329 * Give qr a life of its own */
5337 if (!RExC_utf8 && SvUTF8(qr)) {
5338 /* first time through; the pattern got upgraded; save the
5339 * qr for the next time through */
5340 assert(!pRExC_state->runtime_code_qr);
5341 pRExC_state->runtime_code_qr = qr;
5346 /* extract any code blocks within the returned qr// */
5349 /* merge the main (r1) and run-time (r2) code blocks into one */
5351 RXi_GET_DECL(ReANY((REGEXP *)qr), r2);
5352 struct reg_code_block *new_block, *dst;
5353 RExC_state_t * const r1 = pRExC_state; /* convenient alias */
5356 if (!r2->num_code_blocks) /* we guessed wrong */
5358 SvREFCNT_dec_NN(qr);
5363 r1->num_code_blocks + r2->num_code_blocks,
5364 struct reg_code_block);
5367 while ( i1 < r1->num_code_blocks
5368 || i2 < r2->num_code_blocks)
5370 struct reg_code_block *src;
5373 if (i1 == r1->num_code_blocks) {
5374 src = &r2->code_blocks[i2++];
5377 else if (i2 == r2->num_code_blocks)
5378 src = &r1->code_blocks[i1++];
5379 else if ( r1->code_blocks[i1].start
5380 < r2->code_blocks[i2].start)
5382 src = &r1->code_blocks[i1++];
5383 assert(src->end < r2->code_blocks[i2].start);
5386 assert( r1->code_blocks[i1].start
5387 > r2->code_blocks[i2].start);
5388 src = &r2->code_blocks[i2++];
5390 assert(src->end < r1->code_blocks[i1].start);
5393 assert(pat[src->start] == '(');
5394 assert(pat[src->end] == ')');
5395 dst->start = src->start;
5396 dst->end = src->end;
5397 dst->block = src->block;
5398 dst->src_regex = is_qr ? (REGEXP*) SvREFCNT_inc( (SV*) qr)
5402 r1->num_code_blocks += r2->num_code_blocks;
5403 Safefree(r1->code_blocks);
5404 r1->code_blocks = new_block;
5407 SvREFCNT_dec_NN(qr);
5413 S_setup_longest(pTHX_ RExC_state_t *pRExC_state, SV* sv_longest, SV** rx_utf8, SV** rx_substr, I32* rx_end_shift, I32 lookbehind, I32 offset, I32 *minlen, STRLEN longest_length, bool eol, bool meol)
5415 /* This is the common code for setting up the floating and fixed length
5416 * string data extracted from Perl_re_op_compile() below. Returns a boolean
5417 * as to whether succeeded or not */
5421 if (! (longest_length
5422 || (eol /* Can't have SEOL and MULTI */
5423 && (! meol || (RExC_flags & RXf_PMf_MULTILINE)))
5425 /* See comments for join_exact for why REG_SEEN_EXACTF_SHARP_S */
5426 || (RExC_seen & REG_SEEN_EXACTF_SHARP_S))
5431 /* copy the information about the longest from the reg_scan_data
5432 over to the program. */
5433 if (SvUTF8(sv_longest)) {
5434 *rx_utf8 = sv_longest;
5437 *rx_substr = sv_longest;
5440 /* end_shift is how many chars that must be matched that
5441 follow this item. We calculate it ahead of time as once the
5442 lookbehind offset is added in we lose the ability to correctly
5444 ml = minlen ? *(minlen) : (I32)longest_length;
5445 *rx_end_shift = ml - offset
5446 - longest_length + (SvTAIL(sv_longest) != 0)
5449 t = (eol/* Can't have SEOL and MULTI */
5450 && (! meol || (RExC_flags & RXf_PMf_MULTILINE)));
5451 fbm_compile(sv_longest, t ? FBMcf_TAIL : 0);
5457 * Perl_re_op_compile - the perl internal RE engine's function to compile a
5458 * regular expression into internal code.
5459 * The pattern may be passed either as:
5460 * a list of SVs (patternp plus pat_count)
5461 * a list of OPs (expr)
5462 * If both are passed, the SV list is used, but the OP list indicates
5463 * which SVs are actually pre-compiled code blocks
5465 * The SVs in the list have magic and qr overloading applied to them (and
5466 * the list may be modified in-place with replacement SVs in the latter
5469 * If the pattern hasn't changed from old_re, then old_re will be
5472 * eng is the current engine. If that engine has an op_comp method, then
5473 * handle directly (i.e. we assume that op_comp was us); otherwise, just
5474 * do the initial concatenation of arguments and pass on to the external
5477 * If is_bare_re is not null, set it to a boolean indicating whether the
5478 * arg list reduced (after overloading) to a single bare regex which has
5479 * been returned (i.e. /$qr/).
5481 * orig_rx_flags contains RXf_* flags. See perlreapi.pod for more details.
5483 * pm_flags contains the PMf_* flags, typically based on those from the
5484 * pm_flags field of the related PMOP. Currently we're only interested in
5485 * PMf_HAS_CV, PMf_IS_QR, PMf_USE_RE_EVAL.
5487 * We can't allocate space until we know how big the compiled form will be,
5488 * but we can't compile it (and thus know how big it is) until we've got a
5489 * place to put the code. So we cheat: we compile it twice, once with code
5490 * generation turned off and size counting turned on, and once "for real".
5491 * This also means that we don't allocate space until we are sure that the
5492 * thing really will compile successfully, and we never have to move the
5493 * code and thus invalidate pointers into it. (Note that it has to be in
5494 * one piece because free() must be able to free it all.) [NB: not true in perl]
5496 * Beware that the optimization-preparation code in here knows about some
5497 * of the structure of the compiled regexp. [I'll say.]
5501 Perl_re_op_compile(pTHX_ SV ** const patternp, int pat_count,
5502 OP *expr, const regexp_engine* eng, REGEXP *old_re,
5503 bool *is_bare_re, U32 orig_rx_flags, U32 pm_flags)
5508 regexp_internal *ri;
5516 SV *code_blocksv = NULL;
5517 SV** new_patternp = patternp;
5519 /* these are all flags - maybe they should be turned
5520 * into a single int with different bit masks */
5521 I32 sawlookahead = 0;
5524 regex_charset initial_charset = get_regex_charset(orig_rx_flags);
5526 bool runtime_code = 0;
5528 RExC_state_t RExC_state;
5529 RExC_state_t * const pRExC_state = &RExC_state;
5530 #ifdef TRIE_STUDY_OPT
5532 RExC_state_t copyRExC_state;
5534 GET_RE_DEBUG_FLAGS_DECL;
5536 PERL_ARGS_ASSERT_RE_OP_COMPILE;
5538 DEBUG_r(if (!PL_colorset) reginitcolors());
5540 #ifndef PERL_IN_XSUB_RE
5541 /* Initialize these here instead of as-needed, as is quick and avoids
5542 * having to test them each time otherwise */
5543 if (! PL_AboveLatin1) {
5544 PL_AboveLatin1 = _new_invlist_C_array(AboveLatin1_invlist);
5545 PL_ASCII = _new_invlist_C_array(ASCII_invlist);
5546 PL_Latin1 = _new_invlist_C_array(Latin1_invlist);
5548 PL_L1Posix_ptrs[_CC_ALPHANUMERIC]
5549 = _new_invlist_C_array(L1PosixAlnum_invlist);
5550 PL_Posix_ptrs[_CC_ALPHANUMERIC]
5551 = _new_invlist_C_array(PosixAlnum_invlist);
5553 PL_L1Posix_ptrs[_CC_ALPHA]
5554 = _new_invlist_C_array(L1PosixAlpha_invlist);
5555 PL_Posix_ptrs[_CC_ALPHA] = _new_invlist_C_array(PosixAlpha_invlist);
5557 PL_Posix_ptrs[_CC_BLANK] = _new_invlist_C_array(PosixBlank_invlist);
5558 PL_XPosix_ptrs[_CC_BLANK] = _new_invlist_C_array(XPosixBlank_invlist);
5560 /* Cased is the same as Alpha in the ASCII range */
5561 PL_L1Posix_ptrs[_CC_CASED] = _new_invlist_C_array(L1Cased_invlist);
5562 PL_Posix_ptrs[_CC_CASED] = _new_invlist_C_array(PosixAlpha_invlist);
5564 PL_Posix_ptrs[_CC_CNTRL] = _new_invlist_C_array(PosixCntrl_invlist);
5565 PL_XPosix_ptrs[_CC_CNTRL] = _new_invlist_C_array(XPosixCntrl_invlist);
5567 PL_Posix_ptrs[_CC_DIGIT] = _new_invlist_C_array(PosixDigit_invlist);
5568 PL_L1Posix_ptrs[_CC_DIGIT] = _new_invlist_C_array(PosixDigit_invlist);
5570 PL_L1Posix_ptrs[_CC_GRAPH] = _new_invlist_C_array(L1PosixGraph_invlist);
5571 PL_Posix_ptrs[_CC_GRAPH] = _new_invlist_C_array(PosixGraph_invlist);
5573 PL_L1Posix_ptrs[_CC_LOWER] = _new_invlist_C_array(L1PosixLower_invlist);
5574 PL_Posix_ptrs[_CC_LOWER] = _new_invlist_C_array(PosixLower_invlist);
5576 PL_L1Posix_ptrs[_CC_PRINT] = _new_invlist_C_array(L1PosixPrint_invlist);
5577 PL_Posix_ptrs[_CC_PRINT] = _new_invlist_C_array(PosixPrint_invlist);
5579 PL_L1Posix_ptrs[_CC_PUNCT] = _new_invlist_C_array(L1PosixPunct_invlist);
5580 PL_Posix_ptrs[_CC_PUNCT] = _new_invlist_C_array(PosixPunct_invlist);
5582 PL_Posix_ptrs[_CC_SPACE] = _new_invlist_C_array(PerlSpace_invlist);
5583 PL_XPosix_ptrs[_CC_SPACE] = _new_invlist_C_array(XPerlSpace_invlist);
5584 PL_Posix_ptrs[_CC_PSXSPC] = _new_invlist_C_array(PosixSpace_invlist);
5585 PL_XPosix_ptrs[_CC_PSXSPC] = _new_invlist_C_array(XPosixSpace_invlist);
5587 PL_L1Posix_ptrs[_CC_UPPER] = _new_invlist_C_array(L1PosixUpper_invlist);
5588 PL_Posix_ptrs[_CC_UPPER] = _new_invlist_C_array(PosixUpper_invlist);
5590 PL_XPosix_ptrs[_CC_VERTSPACE] = _new_invlist_C_array(VertSpace_invlist);
5592 PL_Posix_ptrs[_CC_WORDCHAR] = _new_invlist_C_array(PosixWord_invlist);
5593 PL_L1Posix_ptrs[_CC_WORDCHAR]
5594 = _new_invlist_C_array(L1PosixWord_invlist);
5596 PL_Posix_ptrs[_CC_XDIGIT] = _new_invlist_C_array(PosixXDigit_invlist);
5597 PL_XPosix_ptrs[_CC_XDIGIT] = _new_invlist_C_array(XPosixXDigit_invlist);
5599 PL_HasMultiCharFold = _new_invlist_C_array(_Perl_Multi_Char_Folds_invlist);
5603 pRExC_state->code_blocks = NULL;
5604 pRExC_state->num_code_blocks = 0;
5607 *is_bare_re = FALSE;
5609 if (expr && (expr->op_type == OP_LIST ||
5610 (expr->op_type == OP_NULL && expr->op_targ == OP_LIST))) {
5611 /* allocate code_blocks if needed */
5615 for (o = cLISTOPx(expr)->op_first; o; o = o->op_sibling)
5616 if (o->op_type == OP_NULL && (o->op_flags & OPf_SPECIAL))
5617 ncode++; /* count of DO blocks */
5619 pRExC_state->num_code_blocks = ncode;
5620 Newx(pRExC_state->code_blocks, ncode, struct reg_code_block);
5625 /* compile-time pattern with just OP_CONSTs and DO blocks */
5630 /* find how many CONSTs there are */
5633 if (expr->op_type == OP_CONST)
5636 for (o = cLISTOPx(expr)->op_first; o; o = o->op_sibling) {
5637 if (o->op_type == OP_CONST)
5641 /* fake up an SV array */
5643 assert(!new_patternp);
5644 Newx(new_patternp, n, SV*);
5645 SAVEFREEPV(new_patternp);
5649 if (expr->op_type == OP_CONST)
5650 new_patternp[n] = cSVOPx_sv(expr);
5652 for (o = cLISTOPx(expr)->op_first; o; o = o->op_sibling) {
5653 if (o->op_type == OP_CONST)
5654 new_patternp[n++] = cSVOPo_sv;
5659 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log,
5660 "Assembling pattern from %d elements%s\n", pat_count,
5661 orig_rx_flags & RXf_SPLIT ? " for split" : ""));
5663 /* set expr to the first arg op */
5665 if (pRExC_state->num_code_blocks
5666 && expr->op_type != OP_CONST)
5668 expr = cLISTOPx(expr)->op_first;
5669 assert( expr->op_type == OP_PUSHMARK
5670 || (expr->op_type == OP_NULL && expr->op_targ == OP_PUSHMARK)
5671 || expr->op_type == OP_PADRANGE);
5672 expr = expr->op_sibling;
5675 pat = S_concat_pat(aTHX_ pRExC_state, NULL, new_patternp, pat_count,
5676 expr, &recompile, NULL);
5678 /* handle bare (possibly after overloading) regex: foo =~ $re */
5683 if (SvTYPE(re) == SVt_REGEXP) {
5687 Safefree(pRExC_state->code_blocks);
5688 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log,
5689 "Precompiled pattern%s\n",
5690 orig_rx_flags & RXf_SPLIT ? " for split" : ""));
5696 exp = SvPV_nomg(pat, plen);
5698 if (!eng->op_comp) {
5699 if ((SvUTF8(pat) && IN_BYTES)
5700 || SvGMAGICAL(pat) || SvAMAGIC(pat))
5702 /* make a temporary copy; either to convert to bytes,
5703 * or to avoid repeating get-magic / overloaded stringify */
5704 pat = newSVpvn_flags(exp, plen, SVs_TEMP |
5705 (IN_BYTES ? 0 : SvUTF8(pat)));
5707 Safefree(pRExC_state->code_blocks);
5708 return CALLREGCOMP_ENG(eng, pat, orig_rx_flags);
5711 /* ignore the utf8ness if the pattern is 0 length */
5712 RExC_utf8 = RExC_orig_utf8 = (plen == 0 || IN_BYTES) ? 0 : SvUTF8(pat);
5713 RExC_uni_semantics = 0;
5714 RExC_contains_locale = 0;
5715 pRExC_state->runtime_code_qr = NULL;
5718 SV *dsv= sv_newmortal();
5719 RE_PV_QUOTED_DECL(s, RExC_utf8, dsv, exp, plen, 60);
5720 PerlIO_printf(Perl_debug_log, "%sCompiling REx%s %s\n",
5721 PL_colors[4],PL_colors[5],s);
5725 /* we jump here if we upgrade the pattern to utf8 and have to
5728 if ((pm_flags & PMf_USE_RE_EVAL)
5729 /* this second condition covers the non-regex literal case,
5730 * i.e. $foo =~ '(?{})'. */
5731 || (IN_PERL_COMPILETIME && (PL_hints & HINT_RE_EVAL))
5733 runtime_code = S_has_runtime_code(aTHX_ pRExC_state, exp, plen);
5735 /* return old regex if pattern hasn't changed */
5736 /* XXX: note in the below we have to check the flags as well as the pattern.
5738 * Things get a touch tricky as we have to compare the utf8 flag independently
5739 * from the compile flags.
5744 && !!RX_UTF8(old_re) == !!RExC_utf8
5745 && ( RX_COMPFLAGS(old_re) == ( orig_rx_flags & RXf_PMf_FLAGCOPYMASK ) )
5746 && RX_PRECOMP(old_re)
5747 && RX_PRELEN(old_re) == plen
5748 && memEQ(RX_PRECOMP(old_re), exp, plen)
5749 && !runtime_code /* with runtime code, always recompile */ )
5751 Safefree(pRExC_state->code_blocks);
5755 rx_flags = orig_rx_flags;
5757 if (initial_charset == REGEX_LOCALE_CHARSET) {
5758 RExC_contains_locale = 1;
5760 else if (RExC_utf8 && initial_charset == REGEX_DEPENDS_CHARSET) {
5762 /* Set to use unicode semantics if the pattern is in utf8 and has the
5763 * 'depends' charset specified, as it means unicode when utf8 */
5764 set_regex_charset(&rx_flags, REGEX_UNICODE_CHARSET);
5768 RExC_flags = rx_flags;
5769 RExC_pm_flags = pm_flags;
5772 if (TAINTING_get && TAINT_get)
5773 Perl_croak(aTHX_ "Eval-group in insecure regular expression");
5775 if (!S_compile_runtime_code(aTHX_ pRExC_state, exp, plen)) {
5776 /* whoops, we have a non-utf8 pattern, whilst run-time code
5777 * got compiled as utf8. Try again with a utf8 pattern */
5778 S_pat_upgrade_to_utf8(aTHX_ pRExC_state, &exp, &plen,
5779 pRExC_state->num_code_blocks);
5780 goto redo_first_pass;
5783 assert(!pRExC_state->runtime_code_qr);
5788 RExC_in_lookbehind = 0;
5789 RExC_seen_zerolen = *exp == '^' ? -1 : 0;
5791 RExC_override_recoding = 0;
5792 RExC_in_multi_char_class = 0;
5794 /* First pass: determine size, legality. */
5797 RExC_end = exp + plen;
5802 RExC_emit = &RExC_emit_dummy;
5803 RExC_whilem_seen = 0;
5804 RExC_open_parens = NULL;
5805 RExC_close_parens = NULL;
5807 RExC_paren_names = NULL;
5809 RExC_paren_name_list = NULL;
5811 RExC_recurse = NULL;
5812 RExC_recurse_count = 0;
5813 pRExC_state->code_index = 0;
5815 #if 0 /* REGC() is (currently) a NOP at the first pass.
5816 * Clever compilers notice this and complain. --jhi */
5817 REGC((U8)REG_MAGIC, (char*)RExC_emit);
5820 PerlIO_printf(Perl_debug_log, "Starting first pass (sizing)\n");
5822 RExC_lastparse=NULL;
5824 /* reg may croak on us, not giving us a chance to free
5825 pRExC_state->code_blocks. We cannot SAVEFREEPV it now, as we may
5826 need it to survive as long as the regexp (qr/(?{})/).
5827 We must check that code_blocksv is not already set, because we may
5828 have jumped back to restart the sizing pass. */
5829 if (pRExC_state->code_blocks && !code_blocksv) {
5830 code_blocksv = newSV_type(SVt_PV);
5831 SAVEFREESV(code_blocksv);
5832 SvPV_set(code_blocksv, (char *)pRExC_state->code_blocks);
5833 SvLEN_set(code_blocksv, 1); /*sufficient to make sv_clear free it*/
5835 if (reg(pRExC_state, 0, &flags,1) == NULL) {
5836 /* It's possible to write a regexp in ascii that represents Unicode
5837 codepoints outside of the byte range, such as via \x{100}. If we
5838 detect such a sequence we have to convert the entire pattern to utf8
5839 and then recompile, as our sizing calculation will have been based
5840 on 1 byte == 1 character, but we will need to use utf8 to encode
5841 at least some part of the pattern, and therefore must convert the whole
5844 if (flags & RESTART_UTF8) {
5845 S_pat_upgrade_to_utf8(aTHX_ pRExC_state, &exp, &plen,
5846 pRExC_state->num_code_blocks);
5847 goto redo_first_pass;
5849 Perl_croak(aTHX_ "panic: reg returned NULL to re_op_compile for sizing pass, flags=%#"UVxf"", (UV) flags);
5852 SvLEN_set(code_blocksv,0); /* no you can't have it, sv_clear */
5855 PerlIO_printf(Perl_debug_log,
5856 "Required size %"IVdf" nodes\n"
5857 "Starting second pass (creation)\n",
5860 RExC_lastparse=NULL;
5863 /* The first pass could have found things that force Unicode semantics */
5864 if ((RExC_utf8 || RExC_uni_semantics)
5865 && get_regex_charset(rx_flags) == REGEX_DEPENDS_CHARSET)
5867 set_regex_charset(&rx_flags, REGEX_UNICODE_CHARSET);
5870 /* Small enough for pointer-storage convention?
5871 If extralen==0, this means that we will not need long jumps. */
5872 if (RExC_size >= 0x10000L && RExC_extralen)
5873 RExC_size += RExC_extralen;
5876 if (RExC_whilem_seen > 15)
5877 RExC_whilem_seen = 15;
5879 /* Allocate space and zero-initialize. Note, the two step process
5880 of zeroing when in debug mode, thus anything assigned has to
5881 happen after that */
5882 rx = (REGEXP*) newSV_type(SVt_REGEXP);
5884 Newxc(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode),
5885 char, regexp_internal);
5886 if ( r == NULL || ri == NULL )
5887 FAIL("Regexp out of space");
5889 /* avoid reading uninitialized memory in DEBUGGING code in study_chunk() */
5890 Zero(ri, sizeof(regexp_internal) + (unsigned)RExC_size * sizeof(regnode), char);
5892 /* bulk initialize base fields with 0. */
5893 Zero(ri, sizeof(regexp_internal), char);
5896 /* non-zero initialization begins here */
5899 r->extflags = rx_flags;
5900 RXp_COMPFLAGS(r) = orig_rx_flags & RXf_PMf_FLAGCOPYMASK;
5902 if (pm_flags & PMf_IS_QR) {
5903 ri->code_blocks = pRExC_state->code_blocks;
5904 ri->num_code_blocks = pRExC_state->num_code_blocks;
5909 for (n = 0; n < pRExC_state->num_code_blocks; n++)
5910 if (pRExC_state->code_blocks[n].src_regex)
5911 SAVEFREESV(pRExC_state->code_blocks[n].src_regex);
5912 SAVEFREEPV(pRExC_state->code_blocks);
5916 bool has_p = ((r->extflags & RXf_PMf_KEEPCOPY) == RXf_PMf_KEEPCOPY);
5917 bool has_charset = (get_regex_charset(r->extflags) != REGEX_DEPENDS_CHARSET);
5919 /* The caret is output if there are any defaults: if not all the STD
5920 * flags are set, or if no character set specifier is needed */
5922 (((r->extflags & RXf_PMf_STD_PMMOD) != RXf_PMf_STD_PMMOD)
5924 bool has_runon = ((RExC_seen & REG_SEEN_RUN_ON_COMMENT)==REG_SEEN_RUN_ON_COMMENT);
5925 U16 reganch = (U16)((r->extflags & RXf_PMf_STD_PMMOD)
5926 >> RXf_PMf_STD_PMMOD_SHIFT);
5927 const char *fptr = STD_PAT_MODS; /*"msix"*/
5929 /* Allocate for the worst case, which is all the std flags are turned
5930 * on. If more precision is desired, we could do a population count of
5931 * the flags set. This could be done with a small lookup table, or by
5932 * shifting, masking and adding, or even, when available, assembly
5933 * language for a machine-language population count.
5934 * We never output a minus, as all those are defaults, so are
5935 * covered by the caret */
5936 const STRLEN wraplen = plen + has_p + has_runon
5937 + has_default /* If needs a caret */
5939 /* If needs a character set specifier */
5940 + ((has_charset) ? MAX_CHARSET_NAME_LENGTH : 0)
5941 + (sizeof(STD_PAT_MODS) - 1)
5942 + (sizeof("(?:)") - 1);
5944 Newx(p, wraplen + 1, char); /* +1 for the ending NUL */
5945 r->xpv_len_u.xpvlenu_pv = p;
5947 SvFLAGS(rx) |= SVf_UTF8;
5950 /* If a default, cover it using the caret */
5952 *p++= DEFAULT_PAT_MOD;
5956 const char* const name = get_regex_charset_name(r->extflags, &len);
5957 Copy(name, p, len, char);
5961 *p++ = KEEPCOPY_PAT_MOD; /*'p'*/
5964 while((ch = *fptr++)) {
5972 Copy(RExC_precomp, p, plen, char);
5973 assert ((RX_WRAPPED(rx) - p) < 16);
5974 r->pre_prefix = p - RX_WRAPPED(rx);
5980 SvCUR_set(rx, p - RX_WRAPPED(rx));
5984 r->nparens = RExC_npar - 1; /* set early to validate backrefs */
5986 if (RExC_seen & REG_SEEN_RECURSE) {
5987 Newxz(RExC_open_parens, RExC_npar,regnode *);
5988 SAVEFREEPV(RExC_open_parens);
5989 Newxz(RExC_close_parens,RExC_npar,regnode *);
5990 SAVEFREEPV(RExC_close_parens);
5993 /* Useful during FAIL. */
5994 #ifdef RE_TRACK_PATTERN_OFFSETS
5995 Newxz(ri->u.offsets, 2*RExC_size+1, U32); /* MJD 20001228 */
5996 DEBUG_OFFSETS_r(PerlIO_printf(Perl_debug_log,
5997 "%s %"UVuf" bytes for offset annotations.\n",
5998 ri->u.offsets ? "Got" : "Couldn't get",
5999 (UV)((2*RExC_size+1) * sizeof(U32))));
6001 SetProgLen(ri,RExC_size);
6006 /* Second pass: emit code. */
6007 RExC_flags = rx_flags; /* don't let top level (?i) bleed */
6008 RExC_pm_flags = pm_flags;
6010 RExC_end = exp + plen;
6013 RExC_emit_start = ri->program;
6014 RExC_emit = ri->program;
6015 RExC_emit_bound = ri->program + RExC_size + 1;
6016 pRExC_state->code_index = 0;
6018 REGC((U8)REG_MAGIC, (char*) RExC_emit++);
6019 if (reg(pRExC_state, 0, &flags,1) == NULL) {
6021 Perl_croak(aTHX_ "panic: reg returned NULL to re_op_compile for generation pass, flags=%#"UVxf"", (UV) flags);
6023 /* XXXX To minimize changes to RE engine we always allocate
6024 3-units-long substrs field. */
6025 Newx(r->substrs, 1, struct reg_substr_data);
6026 if (RExC_recurse_count) {
6027 Newxz(RExC_recurse,RExC_recurse_count,regnode *);
6028 SAVEFREEPV(RExC_recurse);
6032 r->minlen = minlen = sawlookahead = sawplus = sawopen = 0;
6033 Zero(r->substrs, 1, struct reg_substr_data);
6035 #ifdef TRIE_STUDY_OPT
6037 StructCopy(&zero_scan_data, &data, scan_data_t);
6038 copyRExC_state = RExC_state;
6041 DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log,"Restudying\n"));
6043 RExC_state = copyRExC_state;
6044 if (seen & REG_TOP_LEVEL_BRANCHES)
6045 RExC_seen |= REG_TOP_LEVEL_BRANCHES;
6047 RExC_seen &= ~REG_TOP_LEVEL_BRANCHES;
6048 StructCopy(&zero_scan_data, &data, scan_data_t);
6051 StructCopy(&zero_scan_data, &data, scan_data_t);
6054 /* Dig out information for optimizations. */
6055 r->extflags = RExC_flags; /* was pm_op */
6056 /*dmq: removed as part of de-PMOP: pm->op_pmflags = RExC_flags; */
6059 SvUTF8_on(rx); /* Unicode in it? */
6060 ri->regstclass = NULL;
6061 if (RExC_naughty >= 10) /* Probably an expensive pattern. */
6062 r->intflags |= PREGf_NAUGHTY;
6063 scan = ri->program + 1; /* First BRANCH. */
6065 /* testing for BRANCH here tells us whether there is "must appear"
6066 data in the pattern. If there is then we can use it for optimisations */
6067 if (!(RExC_seen & REG_TOP_LEVEL_BRANCHES)) { /* Only one top-level choice. */
6069 STRLEN longest_float_length, longest_fixed_length;
6070 struct regnode_charclass_class ch_class; /* pointed to by data */
6072 I32 last_close = 0; /* pointed to by data */
6073 regnode *first= scan;
6074 regnode *first_next= regnext(first);
6076 * Skip introductions and multiplicators >= 1
6077 * so that we can extract the 'meat' of the pattern that must
6078 * match in the large if() sequence following.
6079 * NOTE that EXACT is NOT covered here, as it is normally
6080 * picked up by the optimiser separately.
6082 * This is unfortunate as the optimiser isnt handling lookahead
6083 * properly currently.
6086 while ((OP(first) == OPEN && (sawopen = 1)) ||
6087 /* An OR of *one* alternative - should not happen now. */
6088 (OP(first) == BRANCH && OP(first_next) != BRANCH) ||
6089 /* for now we can't handle lookbehind IFMATCH*/
6090 (OP(first) == IFMATCH && !first->flags && (sawlookahead = 1)) ||
6091 (OP(first) == PLUS) ||
6092 (OP(first) == MINMOD) ||
6093 /* An {n,m} with n>0 */
6094 (PL_regkind[OP(first)] == CURLY && ARG1(first) > 0) ||
6095 (OP(first) == NOTHING && PL_regkind[OP(first_next)] != END ))
6098 * the only op that could be a regnode is PLUS, all the rest
6099 * will be regnode_1 or regnode_2.
6102 if (OP(first) == PLUS)
6105 first += regarglen[OP(first)];
6107 first = NEXTOPER(first);
6108 first_next= regnext(first);
6111 /* Starting-point info. */
6113 DEBUG_PEEP("first:",first,0);
6114 /* Ignore EXACT as we deal with it later. */
6115 if (PL_regkind[OP(first)] == EXACT) {
6116 if (OP(first) == EXACT)
6117 NOOP; /* Empty, get anchored substr later. */
6119 ri->regstclass = first;
6122 else if (PL_regkind[OP(first)] == TRIE &&
6123 ((reg_trie_data *)ri->data->data[ ARG(first) ])->minlen>0)
6126 /* this can happen only on restudy */
6127 if ( OP(first) == TRIE ) {
6128 struct regnode_1 *trieop = (struct regnode_1 *)
6129 PerlMemShared_calloc(1, sizeof(struct regnode_1));
6130 StructCopy(first,trieop,struct regnode_1);
6131 trie_op=(regnode *)trieop;
6133 struct regnode_charclass *trieop = (struct regnode_charclass *)
6134 PerlMemShared_calloc(1, sizeof(struct regnode_charclass));
6135 StructCopy(first,trieop,struct regnode_charclass);
6136 trie_op=(regnode *)trieop;
6139 make_trie_failtable(pRExC_state, (regnode *)first, trie_op, 0);
6140 ri->regstclass = trie_op;
6143 else if (REGNODE_SIMPLE(OP(first)))
6144 ri->regstclass = first;
6145 else if (PL_regkind[OP(first)] == BOUND ||
6146 PL_regkind[OP(first)] == NBOUND)
6147 ri->regstclass = first;
6148 else if (PL_regkind[OP(first)] == BOL) {
6149 r->extflags |= (OP(first) == MBOL
6151 : (OP(first) == SBOL
6154 first = NEXTOPER(first);
6157 else if (OP(first) == GPOS) {
6158 r->extflags |= RXf_ANCH_GPOS;
6159 first = NEXTOPER(first);
6162 else if ((!sawopen || !RExC_sawback) &&
6163 (OP(first) == STAR &&
6164 PL_regkind[OP(NEXTOPER(first))] == REG_ANY) &&
6165 !(r->extflags & RXf_ANCH) && !pRExC_state->num_code_blocks)
6167 /* turn .* into ^.* with an implied $*=1 */
6169 (OP(NEXTOPER(first)) == REG_ANY)
6172 r->extflags |= type;
6173 r->intflags |= PREGf_IMPLICIT;
6174 first = NEXTOPER(first);
6177 if (sawplus && !sawlookahead && (!sawopen || !RExC_sawback)
6178 && !pRExC_state->num_code_blocks) /* May examine pos and $& */
6179 /* x+ must match at the 1st pos of run of x's */
6180 r->intflags |= PREGf_SKIP;
6182 /* Scan is after the zeroth branch, first is atomic matcher. */
6183 #ifdef TRIE_STUDY_OPT
6186 PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n",
6187 (IV)(first - scan + 1))
6191 PerlIO_printf(Perl_debug_log, "first at %"IVdf"\n",
6192 (IV)(first - scan + 1))
6198 * If there's something expensive in the r.e., find the
6199 * longest literal string that must appear and make it the
6200 * regmust. Resolve ties in favor of later strings, since
6201 * the regstart check works with the beginning of the r.e.
6202 * and avoiding duplication strengthens checking. Not a
6203 * strong reason, but sufficient in the absence of others.
6204 * [Now we resolve ties in favor of the earlier string if
6205 * it happens that c_offset_min has been invalidated, since the
6206 * earlier string may buy us something the later one won't.]
6209 data.longest_fixed = newSVpvs("");
6210 data.longest_float = newSVpvs("");
6211 data.last_found = newSVpvs("");
6212 data.longest = &(data.longest_fixed);
6213 ENTER_with_name("study_chunk");
6214 SAVEFREESV(data.longest_fixed);
6215 SAVEFREESV(data.longest_float);
6216 SAVEFREESV(data.last_found);
6218 if (!ri->regstclass) {
6219 cl_init(pRExC_state, &ch_class);
6220 data.start_class = &ch_class;
6221 stclass_flag = SCF_DO_STCLASS_AND;
6222 } else /* XXXX Check for BOUND? */
6224 data.last_closep = &last_close;
6226 minlen = study_chunk(pRExC_state, &first, &minlen, &fake, scan + RExC_size, /* Up to end */
6227 &data, -1, NULL, NULL,
6228 SCF_DO_SUBSTR | SCF_WHILEM_VISITED_POS | stclass_flag
6229 | (restudied ? SCF_TRIE_DOING_RESTUDY : 0),
6233 CHECK_RESTUDY_GOTO_butfirst(LEAVE_with_name("study_chunk"));
6236 if ( RExC_npar == 1 && data.longest == &(data.longest_fixed)
6237 && data.last_start_min == 0 && data.last_end > 0
6238 && !RExC_seen_zerolen
6239 && !(RExC_seen & REG_SEEN_VERBARG)
6240 && (!(RExC_seen & REG_SEEN_GPOS) || (r->extflags & RXf_ANCH_GPOS)))
6241 r->extflags |= RXf_CHECK_ALL;
6242 scan_commit(pRExC_state, &data,&minlen,0);
6244 longest_float_length = CHR_SVLEN(data.longest_float);
6246 if (! ((SvCUR(data.longest_fixed) /* ok to leave SvCUR */
6247 && data.offset_fixed == data.offset_float_min
6248 && SvCUR(data.longest_fixed) == SvCUR(data.longest_float)))
6249 && S_setup_longest (aTHX_ pRExC_state,
6253 &(r->float_end_shift),
6254 data.lookbehind_float,
6255 data.offset_float_min,
6257 longest_float_length,
6258 cBOOL(data.flags & SF_FL_BEFORE_EOL),
6259 cBOOL(data.flags & SF_FL_BEFORE_MEOL)))
6261 r->float_min_offset = data.offset_float_min - data.lookbehind_float;
6262 r->float_max_offset = data.offset_float_max;
6263 if (data.offset_float_max < I32_MAX) /* Don't offset infinity */
6264 r->float_max_offset -= data.lookbehind_float;
6265 SvREFCNT_inc_simple_void_NN(data.longest_float);
6268 r->float_substr = r->float_utf8 = NULL;
6269 longest_float_length = 0;
6272 longest_fixed_length = CHR_SVLEN(data.longest_fixed);
6274 if (S_setup_longest (aTHX_ pRExC_state,
6276 &(r->anchored_utf8),
6277 &(r->anchored_substr),
6278 &(r->anchored_end_shift),
6279 data.lookbehind_fixed,
6282 longest_fixed_length,
6283 cBOOL(data.flags & SF_FIX_BEFORE_EOL),
6284 cBOOL(data.flags & SF_FIX_BEFORE_MEOL)))
6286 r->anchored_offset = data.offset_fixed - data.lookbehind_fixed;
6287 SvREFCNT_inc_simple_void_NN(data.longest_fixed);
6290 r->anchored_substr = r->anchored_utf8 = NULL;
6291 longest_fixed_length = 0;
6293 LEAVE_with_name("study_chunk");
6296 && (OP(ri->regstclass) == REG_ANY || OP(ri->regstclass) == SANY))
6297 ri->regstclass = NULL;
6299 if ((!(r->anchored_substr || r->anchored_utf8) || r->anchored_offset)
6301 && ! TEST_SSC_EOS(data.start_class)
6302 && !cl_is_anything(data.start_class))
6304 const U32 n = add_data(pRExC_state, 1, "f");
6305 OP(data.start_class) = ANYOF_SYNTHETIC;
6307 Newx(RExC_rxi->data->data[n], 1,
6308 struct regnode_charclass_class);
6309 StructCopy(data.start_class,
6310 (struct regnode_charclass_class*)RExC_rxi->data->data[n],
6311 struct regnode_charclass_class);
6312 ri->regstclass = (regnode*)RExC_rxi->data->data[n];
6313 r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */
6314 DEBUG_COMPILE_r({ SV *sv = sv_newmortal();
6315 regprop(r, sv, (regnode*)data.start_class);
6316 PerlIO_printf(Perl_debug_log,
6317 "synthetic stclass \"%s\".\n",
6318 SvPVX_const(sv));});
6321 /* A temporary algorithm prefers floated substr to fixed one to dig more info. */
6322 if (longest_fixed_length > longest_float_length) {
6323 r->check_end_shift = r->anchored_end_shift;
6324 r->check_substr = r->anchored_substr;
6325 r->check_utf8 = r->anchored_utf8;
6326 r->check_offset_min = r->check_offset_max = r->anchored_offset;
6327 if (r->extflags & RXf_ANCH_SINGLE)
6328 r->extflags |= RXf_NOSCAN;
6331 r->check_end_shift = r->float_end_shift;
6332 r->check_substr = r->float_substr;
6333 r->check_utf8 = r->float_utf8;
6334 r->check_offset_min = r->float_min_offset;
6335 r->check_offset_max = r->float_max_offset;
6337 /* XXXX Currently intuiting is not compatible with ANCH_GPOS.
6338 This should be changed ASAP! */
6339 if ((r->check_substr || r->check_utf8) && !(r->extflags & RXf_ANCH_GPOS)) {
6340 r->extflags |= RXf_USE_INTUIT;
6341 if (SvTAIL(r->check_substr ? r->check_substr : r->check_utf8))
6342 r->extflags |= RXf_INTUIT_TAIL;
6344 /* XXX Unneeded? dmq (shouldn't as this is handled elsewhere)
6345 if ( (STRLEN)minlen < longest_float_length )
6346 minlen= longest_float_length;
6347 if ( (STRLEN)minlen < longest_fixed_length )
6348 minlen= longest_fixed_length;
6352 /* Several toplevels. Best we can is to set minlen. */
6354 struct regnode_charclass_class ch_class;
6357 DEBUG_PARSE_r(PerlIO_printf(Perl_debug_log, "\nMulti Top Level\n"));
6359 scan = ri->program + 1;
6360 cl_init(pRExC_state, &ch_class);
6361 data.start_class = &ch_class;
6362 data.last_closep = &last_close;
6365 minlen = study_chunk(pRExC_state, &scan, &minlen, &fake, scan + RExC_size,
6366 &data, -1, NULL, NULL,
6367 SCF_DO_STCLASS_AND|SCF_WHILEM_VISITED_POS
6368 |(restudied ? SCF_TRIE_DOING_RESTUDY : 0),
6371 CHECK_RESTUDY_GOTO_butfirst(NOOP);
6373 r->check_substr = r->check_utf8 = r->anchored_substr = r->anchored_utf8
6374 = r->float_substr = r->float_utf8 = NULL;
6376 if (! TEST_SSC_EOS(data.start_class)
6377 && !cl_is_anything(data.start_class))
6379 const U32 n = add_data(pRExC_state, 1, "f");
6380 OP(data.start_class) = ANYOF_SYNTHETIC;
6382 Newx(RExC_rxi->data->data[n], 1,
6383 struct regnode_charclass_class);
6384 StructCopy(data.start_class,
6385 (struct regnode_charclass_class*)RExC_rxi->data->data[n],
6386 struct regnode_charclass_class);
6387 ri->regstclass = (regnode*)RExC_rxi->data->data[n];
6388 r->intflags &= ~PREGf_SKIP; /* Used in find_byclass(). */
6389 DEBUG_COMPILE_r({ SV* sv = sv_newmortal();
6390 regprop(r, sv, (regnode*)data.start_class);
6391 PerlIO_printf(Perl_debug_log,
6392 "synthetic stclass \"%s\".\n",
6393 SvPVX_const(sv));});
6397 /* Guard against an embedded (?=) or (?<=) with a longer minlen than
6398 the "real" pattern. */
6400 PerlIO_printf(Perl_debug_log,"minlen: %"IVdf" r->minlen:%"IVdf"\n",
6401 (IV)minlen, (IV)r->minlen);
6403 r->minlenret = minlen;
6404 if (r->minlen < minlen)
6407 if (RExC_seen & REG_SEEN_GPOS)
6408 r->extflags |= RXf_GPOS_SEEN;
6409 if (RExC_seen & REG_SEEN_LOOKBEHIND)
6410 r->extflags |= RXf_NO_INPLACE_SUBST; /* inplace might break the lookbehind */
6411 if (pRExC_state->num_code_blocks)
6412 r->extflags |= RXf_EVAL_SEEN;
6413 if (RExC_seen & REG_SEEN_CANY)
6414 r->extflags |= RXf_CANY_SEEN;
6415 if (RExC_seen & REG_SEEN_VERBARG)
6417 r->intflags |= PREGf_VERBARG_SEEN;
6418 r->extflags |= RXf_NO_INPLACE_SUBST; /* don't understand this! Yves */
6420 if (RExC_seen & REG_SEEN_CUTGROUP)
6421 r->intflags |= PREGf_CUTGROUP_SEEN;
6422 if (pm_flags & PMf_USE_RE_EVAL)
6423 r->intflags |= PREGf_USE_RE_EVAL;
6424 if (RExC_paren_names)
6425 RXp_PAREN_NAMES(r) = MUTABLE_HV(SvREFCNT_inc(RExC_paren_names));
6427 RXp_PAREN_NAMES(r) = NULL;
6430 regnode *first = ri->program + 1;
6432 regnode *next = NEXTOPER(first);
6435 if (PL_regkind[fop] == NOTHING && nop == END)
6436 r->extflags |= RXf_NULL;
6437 else if (PL_regkind[fop] == BOL && nop == END)
6438 r->extflags |= RXf_START_ONLY;
6439 else if (fop == PLUS && PL_regkind[nop] == POSIXD && FLAGS(next) == _CC_SPACE && OP(regnext(first)) == END)
6440 r->extflags |= RXf_WHITE;
6441 else if ( r->extflags & RXf_SPLIT && fop == EXACT && STR_LEN(first) == 1 && *(STRING(first)) == ' ' && OP(regnext(first)) == END )
6442 r->extflags |= (RXf_SKIPWHITE|RXf_WHITE);
6446 if (RExC_paren_names) {
6447 ri->name_list_idx = add_data( pRExC_state, 1, "a" );
6448 ri->data->data[ri->name_list_idx] = (void*)SvREFCNT_inc(RExC_paren_name_list);
6451 ri->name_list_idx = 0;
6453 if (RExC_recurse_count) {
6454 for ( ; RExC_recurse_count ; RExC_recurse_count-- ) {
6455 const regnode *scan = RExC_recurse[RExC_recurse_count-1];
6456 ARG2L_SET( scan, RExC_open_parens[ARG(scan)-1] - scan );
6459 Newxz(r->offs, RExC_npar, regexp_paren_pair);
6460 /* assume we don't need to swap parens around before we match */
6463 PerlIO_printf(Perl_debug_log,"Final program:\n");
6466 #ifdef RE_TRACK_PATTERN_OFFSETS
6467 DEBUG_OFFSETS_r(if (ri->u.offsets) {
6468 const U32 len = ri->u.offsets[0];
6470 GET_RE_DEBUG_FLAGS_DECL;
6471 PerlIO_printf(Perl_debug_log, "Offsets: [%"UVuf"]\n\t", (UV)ri->u.offsets[0]);
6472 for (i = 1; i <= len; i++) {
6473 if (ri->u.offsets[i*2-1] || ri->u.offsets[i*2])
6474 PerlIO_printf(Perl_debug_log, "%"UVuf":%"UVuf"[%"UVuf"] ",
6475 (UV)i, (UV)ri->u.offsets[i*2-1], (UV)ri->u.offsets[i*2]);
6477 PerlIO_printf(Perl_debug_log, "\n");
6482 /* under ithreads the ?pat? PMf_USED flag on the pmop is simulated
6483 * by setting the regexp SV to readonly-only instead. If the
6484 * pattern's been recompiled, the USEDness should remain. */
6485 if (old_re && SvREADONLY(old_re))
6493 Perl_reg_named_buff(pTHX_ REGEXP * const rx, SV * const key, SV * const value,
6496 PERL_ARGS_ASSERT_REG_NAMED_BUFF;
6498 PERL_UNUSED_ARG(value);
6500 if (flags & RXapif_FETCH) {
6501 return reg_named_buff_fetch(rx, key, flags);
6502 } else if (flags & (RXapif_STORE | RXapif_DELETE | RXapif_CLEAR)) {
6503 Perl_croak_no_modify();
6505 } else if (flags & RXapif_EXISTS) {
6506 return reg_named_buff_exists(rx, key, flags)
6509 } else if (flags & RXapif_REGNAMES) {
6510 return reg_named_buff_all(rx, flags);
6511 } else if (flags & (RXapif_SCALAR | RXapif_REGNAMES_COUNT)) {
6512 return reg_named_buff_scalar(rx, flags);
6514 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff", (int)flags);
6520 Perl_reg_named_buff_iter(pTHX_ REGEXP * const rx, const SV * const lastkey,
6523 PERL_ARGS_ASSERT_REG_NAMED_BUFF_ITER;
6524 PERL_UNUSED_ARG(lastkey);
6526 if (flags & RXapif_FIRSTKEY)
6527 return reg_named_buff_firstkey(rx, flags);
6528 else if (flags & RXapif_NEXTKEY)
6529 return reg_named_buff_nextkey(rx, flags);
6531 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_iter", (int)flags);
6537 Perl_reg_named_buff_fetch(pTHX_ REGEXP * const r, SV * const namesv,
6540 AV *retarray = NULL;
6542 struct regexp *const rx = ReANY(r);
6544 PERL_ARGS_ASSERT_REG_NAMED_BUFF_FETCH;
6546 if (flags & RXapif_ALL)
6549 if (rx && RXp_PAREN_NAMES(rx)) {
6550 HE *he_str = hv_fetch_ent( RXp_PAREN_NAMES(rx), namesv, 0, 0 );
6553 SV* sv_dat=HeVAL(he_str);
6554 I32 *nums=(I32*)SvPVX(sv_dat);
6555 for ( i=0; i<SvIVX(sv_dat); i++ ) {
6556 if ((I32)(rx->nparens) >= nums[i]
6557 && rx->offs[nums[i]].start != -1
6558 && rx->offs[nums[i]].end != -1)
6561 CALLREG_NUMBUF_FETCH(r,nums[i],ret);
6566 ret = newSVsv(&PL_sv_undef);
6569 av_push(retarray, ret);
6572 return newRV_noinc(MUTABLE_SV(retarray));
6579 Perl_reg_named_buff_exists(pTHX_ REGEXP * const r, SV * const key,
6582 struct regexp *const rx = ReANY(r);
6584 PERL_ARGS_ASSERT_REG_NAMED_BUFF_EXISTS;
6586 if (rx && RXp_PAREN_NAMES(rx)) {
6587 if (flags & RXapif_ALL) {
6588 return hv_exists_ent(RXp_PAREN_NAMES(rx), key, 0);
6590 SV *sv = CALLREG_NAMED_BUFF_FETCH(r, key, flags);
6592 SvREFCNT_dec_NN(sv);
6604 Perl_reg_named_buff_firstkey(pTHX_ REGEXP * const r, const U32 flags)
6606 struct regexp *const rx = ReANY(r);
6608 PERL_ARGS_ASSERT_REG_NAMED_BUFF_FIRSTKEY;
6610 if ( rx && RXp_PAREN_NAMES(rx) ) {
6611 (void)hv_iterinit(RXp_PAREN_NAMES(rx));
6613 return CALLREG_NAMED_BUFF_NEXTKEY(r, NULL, flags & ~RXapif_FIRSTKEY);
6620 Perl_reg_named_buff_nextkey(pTHX_ REGEXP * const r, const U32 flags)
6622 struct regexp *const rx = ReANY(r);
6623 GET_RE_DEBUG_FLAGS_DECL;
6625 PERL_ARGS_ASSERT_REG_NAMED_BUFF_NEXTKEY;
6627 if (rx && RXp_PAREN_NAMES(rx)) {
6628 HV *hv = RXp_PAREN_NAMES(rx);
6630 while ( (temphe = hv_iternext_flags(hv,0)) ) {
6633 SV* sv_dat = HeVAL(temphe);
6634 I32 *nums = (I32*)SvPVX(sv_dat);
6635 for ( i = 0; i < SvIVX(sv_dat); i++ ) {
6636 if ((I32)(rx->lastparen) >= nums[i] &&
6637 rx->offs[nums[i]].start != -1 &&
6638 rx->offs[nums[i]].end != -1)
6644 if (parno || flags & RXapif_ALL) {
6645 return newSVhek(HeKEY_hek(temphe));
6653 Perl_reg_named_buff_scalar(pTHX_ REGEXP * const r, const U32 flags)
6658 struct regexp *const rx = ReANY(r);
6660 PERL_ARGS_ASSERT_REG_NAMED_BUFF_SCALAR;
6662 if (rx && RXp_PAREN_NAMES(rx)) {
6663 if (flags & (RXapif_ALL | RXapif_REGNAMES_COUNT)) {
6664 return newSViv(HvTOTALKEYS(RXp_PAREN_NAMES(rx)));
6665 } else if (flags & RXapif_ONE) {
6666 ret = CALLREG_NAMED_BUFF_ALL(r, (flags | RXapif_REGNAMES));
6667 av = MUTABLE_AV(SvRV(ret));
6668 length = av_len(av);
6669 SvREFCNT_dec_NN(ret);
6670 return newSViv(length + 1);
6672 Perl_croak(aTHX_ "panic: Unknown flags %d in named_buff_scalar", (int)flags);
6676 return &PL_sv_undef;
6680 Perl_reg_named_buff_all(pTHX_ REGEXP * const r, const U32 flags)
6682 struct regexp *const rx = ReANY(r);
6685 PERL_ARGS_ASSERT_REG_NAMED_BUFF_ALL;
6687 if (rx && RXp_PAREN_NAMES(rx)) {
6688 HV *hv= RXp_PAREN_NAMES(rx);
6690 (void)hv_iterinit(hv);
6691 while ( (temphe = hv_iternext_flags(hv,0)) ) {
6694 SV* sv_dat = HeVAL(temphe);
6695 I32 *nums = (I32*)SvPVX(sv_dat);
6696 for ( i = 0; i < SvIVX(sv_dat); i++ ) {
6697 if ((I32)(rx->lastparen) >= nums[i] &&
6698 rx->offs[nums[i]].start != -1 &&
6699 rx->offs[nums[i]].end != -1)
6705 if (parno || flags & RXapif_ALL) {
6706 av_push(av, newSVhek(HeKEY_hek(temphe)));
6711 return newRV_noinc(MUTABLE_SV(av));
6715 Perl_reg_numbered_buff_fetch(pTHX_ REGEXP * const r, const I32 paren,
6718 struct regexp *const rx = ReANY(r);
6724 PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_FETCH;
6726 if ( ( n == RX_BUFF_IDX_CARET_PREMATCH
6727 || n == RX_BUFF_IDX_CARET_FULLMATCH
6728 || n == RX_BUFF_IDX_CARET_POSTMATCH
6730 && !(rx->extflags & RXf_PMf_KEEPCOPY)
6737 if (n == RX_BUFF_IDX_CARET_FULLMATCH)
6738 /* no need to distinguish between them any more */
6739 n = RX_BUFF_IDX_FULLMATCH;
6741 if ((n == RX_BUFF_IDX_PREMATCH || n == RX_BUFF_IDX_CARET_PREMATCH)
6742 && rx->offs[0].start != -1)
6744 /* $`, ${^PREMATCH} */
6745 i = rx->offs[0].start;
6749 if ((n == RX_BUFF_IDX_POSTMATCH || n == RX_BUFF_IDX_CARET_POSTMATCH)
6750 && rx->offs[0].end != -1)
6752 /* $', ${^POSTMATCH} */
6753 s = rx->subbeg - rx->suboffset + rx->offs[0].end;
6754 i = rx->sublen + rx->suboffset - rx->offs[0].end;
6757 if ( 0 <= n && n <= (I32)rx->nparens &&
6758 (s1 = rx->offs[n].start) != -1 &&
6759 (t1 = rx->offs[n].end) != -1)
6761 /* $&, ${^MATCH}, $1 ... */
6763 s = rx->subbeg + s1 - rx->suboffset;
6768 assert(s >= rx->subbeg);
6769 assert(rx->sublen >= (s - rx->subbeg) + i );
6771 #if NO_TAINT_SUPPORT
6772 sv_setpvn(sv, s, i);
6774 const int oldtainted = TAINT_get;
6776 sv_setpvn(sv, s, i);
6777 TAINT_set(oldtainted);
6779 if ( (rx->extflags & RXf_CANY_SEEN)
6780 ? (RXp_MATCH_UTF8(rx)
6781 && (!i || is_utf8_string((U8*)s, i)))
6782 : (RXp_MATCH_UTF8(rx)) )
6789 if (RXp_MATCH_TAINTED(rx)) {
6790 if (SvTYPE(sv) >= SVt_PVMG) {
6791 MAGIC* const mg = SvMAGIC(sv);
6794 SvMAGIC_set(sv, mg->mg_moremagic);
6796 if ((mgt = SvMAGIC(sv))) {
6797 mg->mg_moremagic = mgt;
6798 SvMAGIC_set(sv, mg);
6809 sv_setsv(sv,&PL_sv_undef);
6815 Perl_reg_numbered_buff_store(pTHX_ REGEXP * const rx, const I32 paren,
6816 SV const * const value)
6818 PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_STORE;
6820 PERL_UNUSED_ARG(rx);
6821 PERL_UNUSED_ARG(paren);
6822 PERL_UNUSED_ARG(value);
6825 Perl_croak_no_modify();
6829 Perl_reg_numbered_buff_length(pTHX_ REGEXP * const r, const SV * const sv,
6832 struct regexp *const rx = ReANY(r);
6836 PERL_ARGS_ASSERT_REG_NUMBERED_BUFF_LENGTH;
6838 /* Some of this code was originally in C<Perl_magic_len> in F<mg.c> */
6840 case RX_BUFF_IDX_CARET_PREMATCH: /* ${^PREMATCH} */
6841 if (!(rx->extflags & RXf_PMf_KEEPCOPY))
6845 case RX_BUFF_IDX_PREMATCH: /* $` */
6846 if (rx->offs[0].start != -1) {
6847 i = rx->offs[0].start;
6856 case RX_BUFF_IDX_CARET_POSTMATCH: /* ${^POSTMATCH} */
6857 if (!(rx->extflags & RXf_PMf_KEEPCOPY))
6859 case RX_BUFF_IDX_POSTMATCH: /* $' */
6860 if (rx->offs[0].end != -1) {
6861 i = rx->sublen - rx->offs[0].end;
6863 s1 = rx->offs[0].end;
6870 case RX_BUFF_IDX_CARET_FULLMATCH: /* ${^MATCH} */
6871 if (!(rx->extflags & RXf_PMf_KEEPCOPY))
6875 /* $& / ${^MATCH}, $1, $2, ... */
6877 if (paren <= (I32)rx->nparens &&
6878 (s1 = rx->offs[paren].start) != -1 &&
6879 (t1 = rx->offs[paren].end) != -1)
6885 if (ckWARN(WARN_UNINITIALIZED))
6886 report_uninit((const SV *)sv);
6891 if (i > 0 && RXp_MATCH_UTF8(rx)) {
6892 const char * const s = rx->subbeg - rx->suboffset + s1;
6897 if (is_utf8_string_loclen((U8*)s, i, &ep, &el))
6904 Perl_reg_qr_package(pTHX_ REGEXP * const rx)
6906 PERL_ARGS_ASSERT_REG_QR_PACKAGE;
6907 PERL_UNUSED_ARG(rx);
6911 return newSVpvs("Regexp");
6914 /* Scans the name of a named buffer from the pattern.
6915 * If flags is REG_RSN_RETURN_NULL returns null.
6916 * If flags is REG_RSN_RETURN_NAME returns an SV* containing the name
6917 * If flags is REG_RSN_RETURN_DATA returns the data SV* corresponding
6918 * to the parsed name as looked up in the RExC_paren_names hash.
6919 * If there is an error throws a vFAIL().. type exception.
6922 #define REG_RSN_RETURN_NULL 0
6923 #define REG_RSN_RETURN_NAME 1
6924 #define REG_RSN_RETURN_DATA 2
6927 S_reg_scan_name(pTHX_ RExC_state_t *pRExC_state, U32 flags)
6929 char *name_start = RExC_parse;
6931 PERL_ARGS_ASSERT_REG_SCAN_NAME;
6933 if (isIDFIRST_lazy_if(RExC_parse, UTF)) {
6934 /* skip IDFIRST by using do...while */
6937 RExC_parse += UTF8SKIP(RExC_parse);
6938 } while (isWORDCHAR_utf8((U8*)RExC_parse));
6942 } while (isWORDCHAR(*RExC_parse));
6944 RExC_parse++; /* so the <- from the vFAIL is after the offending character */
6945 vFAIL("Group name must start with a non-digit word character");
6949 = newSVpvn_flags(name_start, (int)(RExC_parse - name_start),
6950 SVs_TEMP | (UTF ? SVf_UTF8 : 0));
6951 if ( flags == REG_RSN_RETURN_NAME)
6953 else if (flags==REG_RSN_RETURN_DATA) {
6956 if ( ! sv_name ) /* should not happen*/
6957 Perl_croak(aTHX_ "panic: no svname in reg_scan_name");
6958 if (RExC_paren_names)
6959 he_str = hv_fetch_ent( RExC_paren_names, sv_name, 0, 0 );
6961 sv_dat = HeVAL(he_str);
6963 vFAIL("Reference to nonexistent named group");
6967 Perl_croak(aTHX_ "panic: bad flag %lx in reg_scan_name",
6968 (unsigned long) flags);
6970 assert(0); /* NOT REACHED */
6975 #define DEBUG_PARSE_MSG(funcname) DEBUG_PARSE_r({ \
6976 int rem=(int)(RExC_end - RExC_parse); \
6985 if (RExC_lastparse!=RExC_parse) \
6986 PerlIO_printf(Perl_debug_log," >%.*s%-*s", \
6989 iscut ? "..." : "<" \
6992 PerlIO_printf(Perl_debug_log,"%16s",""); \
6995 num = RExC_size + 1; \
6997 num=REG_NODE_NUM(RExC_emit); \
6998 if (RExC_lastnum!=num) \
6999 PerlIO_printf(Perl_debug_log,"|%4d",num); \
7001 PerlIO_printf(Perl_debug_log,"|%4s",""); \
7002 PerlIO_printf(Perl_debug_log,"|%*s%-4s", \
7003 (int)((depth*2)), "", \
7007 RExC_lastparse=RExC_parse; \
7012 #define DEBUG_PARSE(funcname) DEBUG_PARSE_r({ \
7013 DEBUG_PARSE_MSG((funcname)); \
7014 PerlIO_printf(Perl_debug_log,"%4s","\n"); \
7016 #define DEBUG_PARSE_FMT(funcname,fmt,args) DEBUG_PARSE_r({ \
7017 DEBUG_PARSE_MSG((funcname)); \
7018 PerlIO_printf(Perl_debug_log,fmt "\n",args); \
7021 /* This section of code defines the inversion list object and its methods. The
7022 * interfaces are highly subject to change, so as much as possible is static to
7023 * this file. An inversion list is here implemented as a malloc'd C UV array
7024 * with some added info that is placed as UVs at the beginning in a header
7025 * portion. An inversion list for Unicode is an array of code points, sorted
7026 * by ordinal number. The zeroth element is the first code point in the list.
7027 * The 1th element is the first element beyond that not in the list. In other
7028 * words, the first range is
7029 * invlist[0]..(invlist[1]-1)
7030 * The other ranges follow. Thus every element whose index is divisible by two
7031 * marks the beginning of a range that is in the list, and every element not
7032 * divisible by two marks the beginning of a range not in the list. A single
7033 * element inversion list that contains the single code point N generally
7034 * consists of two elements
7037 * (The exception is when N is the highest representable value on the
7038 * machine, in which case the list containing just it would be a single
7039 * element, itself. By extension, if the last range in the list extends to
7040 * infinity, then the first element of that range will be in the inversion list
7041 * at a position that is divisible by two, and is the final element in the
7043 * Taking the complement (inverting) an inversion list is quite simple, if the
7044 * first element is 0, remove it; otherwise add a 0 element at the beginning.
7045 * This implementation reserves an element at the beginning of each inversion
7046 * list to contain 0 when the list contains 0, and contains 1 otherwise. The
7047 * actual beginning of the list is either that element if 0, or the next one if
7050 * More about inversion lists can be found in "Unicode Demystified"
7051 * Chapter 13 by Richard Gillam, published by Addison-Wesley.
7052 * More will be coming when functionality is added later.
7054 * The inversion list data structure is currently implemented as an SV pointing
7055 * to an array of UVs that the SV thinks are bytes. This allows us to have an
7056 * array of UV whose memory management is automatically handled by the existing
7057 * facilities for SV's.
7059 * Some of the methods should always be private to the implementation, and some
7060 * should eventually be made public */
7062 /* The header definitions are in F<inline_invlist.c> */
7063 #define TO_INTERNAL_SIZE(x) (((x) + HEADER_LENGTH) * sizeof(UV))
7064 #define FROM_INTERNAL_SIZE(x) (((x)/ sizeof(UV)) - HEADER_LENGTH)
7066 #define INVLIST_INITIAL_LEN 10
7068 PERL_STATIC_INLINE UV*
7069 S__invlist_array_init(pTHX_ SV* const invlist, const bool will_have_0)
7071 /* Returns a pointer to the first element in the inversion list's array.
7072 * This is called upon initialization of an inversion list. Where the
7073 * array begins depends on whether the list has the code point U+0000
7074 * in it or not. The other parameter tells it whether the code that
7075 * follows this call is about to put a 0 in the inversion list or not.
7076 * The first element is either the element with 0, if 0, or the next one,
7079 UV* zero = get_invlist_zero_addr(invlist);
7081 PERL_ARGS_ASSERT__INVLIST_ARRAY_INIT;
7084 assert(! *_get_invlist_len_addr(invlist));
7086 /* 1^1 = 0; 1^0 = 1 */
7087 *zero = 1 ^ will_have_0;
7088 return zero + *zero;
7091 PERL_STATIC_INLINE UV*
7092 S_invlist_array(pTHX_ SV* const invlist)
7094 /* Returns the pointer to the inversion list's array. Every time the
7095 * length changes, this needs to be called in case malloc or realloc moved
7098 PERL_ARGS_ASSERT_INVLIST_ARRAY;
7100 /* Must not be empty. If these fail, you probably didn't check for <len>
7101 * being non-zero before trying to get the array */
7102 assert(*_get_invlist_len_addr(invlist));
7103 assert(*get_invlist_zero_addr(invlist) == 0
7104 || *get_invlist_zero_addr(invlist) == 1);
7106 /* The array begins either at the element reserved for zero if the
7107 * list contains 0 (that element will be set to 0), or otherwise the next
7108 * element (in which case the reserved element will be set to 1). */
7109 return (UV *) (get_invlist_zero_addr(invlist)
7110 + *get_invlist_zero_addr(invlist));
7113 PERL_STATIC_INLINE void
7114 S_invlist_set_len(pTHX_ SV* const invlist, const UV len)
7116 /* Sets the current number of elements stored in the inversion list */
7118 PERL_ARGS_ASSERT_INVLIST_SET_LEN;
7120 *_get_invlist_len_addr(invlist) = len;
7122 assert(len <= SvLEN(invlist));
7124 SvCUR_set(invlist, TO_INTERNAL_SIZE(len));
7125 /* If the list contains U+0000, that element is part of the header,
7126 * and should not be counted as part of the array. It will contain
7127 * 0 in that case, and 1 otherwise. So we could flop 0=>1, 1=>0 and
7129 * SvCUR_set(invlist,
7130 * TO_INTERNAL_SIZE(len
7131 * - (*get_invlist_zero_addr(inv_list) ^ 1)));
7132 * But, this is only valid if len is not 0. The consequences of not doing
7133 * this is that the memory allocation code may think that 1 more UV is
7134 * being used than actually is, and so might do an unnecessary grow. That
7135 * seems worth not bothering to make this the precise amount.
7137 * Note that when inverting, SvCUR shouldn't change */
7140 PERL_STATIC_INLINE IV*
7141 S_get_invlist_previous_index_addr(pTHX_ SV* invlist)
7143 /* Return the address of the UV that is reserved to hold the cached index
7146 PERL_ARGS_ASSERT_GET_INVLIST_PREVIOUS_INDEX_ADDR;
7148 return (IV *) (SvPVX(invlist) + (INVLIST_PREVIOUS_INDEX_OFFSET * sizeof (UV)));
7151 PERL_STATIC_INLINE IV
7152 S_invlist_previous_index(pTHX_ SV* const invlist)
7154 /* Returns cached index of previous search */
7156 PERL_ARGS_ASSERT_INVLIST_PREVIOUS_INDEX;
7158 return *get_invlist_previous_index_addr(invlist);
7161 PERL_STATIC_INLINE void
7162 S_invlist_set_previous_index(pTHX_ SV* const invlist, const IV index)
7164 /* Caches <index> for later retrieval */
7166 PERL_ARGS_ASSERT_INVLIST_SET_PREVIOUS_INDEX;
7168 assert(index == 0 || index < (int) _invlist_len(invlist));
7170 *get_invlist_previous_index_addr(invlist) = index;
7173 PERL_STATIC_INLINE UV
7174 S_invlist_max(pTHX_ SV* const invlist)
7176 /* Returns the maximum number of elements storable in the inversion list's
7177 * array, without having to realloc() */
7179 PERL_ARGS_ASSERT_INVLIST_MAX;
7181 return SvLEN(invlist) == 0 /* This happens under _new_invlist_C_array */
7182 ? _invlist_len(invlist)
7183 : FROM_INTERNAL_SIZE(SvLEN(invlist));
7186 PERL_STATIC_INLINE UV*
7187 S_get_invlist_zero_addr(pTHX_ SV* invlist)
7189 /* Return the address of the UV that is reserved to hold 0 if the inversion
7190 * list contains 0. This has to be the last element of the heading, as the
7191 * list proper starts with either it if 0, or the next element if not.
7192 * (But we force it to contain either 0 or 1) */
7194 PERL_ARGS_ASSERT_GET_INVLIST_ZERO_ADDR;
7196 return (UV *) (SvPVX(invlist) + (INVLIST_ZERO_OFFSET * sizeof (UV)));
7199 #ifndef PERL_IN_XSUB_RE
7201 Perl__new_invlist(pTHX_ IV initial_size)
7204 /* Return a pointer to a newly constructed inversion list, with enough
7205 * space to store 'initial_size' elements. If that number is negative, a
7206 * system default is used instead */
7210 if (initial_size < 0) {
7211 initial_size = INVLIST_INITIAL_LEN;
7214 /* Allocate the initial space */
7215 new_list = newSV(TO_INTERNAL_SIZE(initial_size));
7216 invlist_set_len(new_list, 0);
7218 /* Force iterinit() to be used to get iteration to work */
7219 *get_invlist_iter_addr(new_list) = UV_MAX;
7221 /* This should force a segfault if a method doesn't initialize this
7223 *get_invlist_zero_addr(new_list) = UV_MAX;
7225 *get_invlist_previous_index_addr(new_list) = 0;
7226 *get_invlist_version_id_addr(new_list) = INVLIST_VERSION_ID;
7227 #if HEADER_LENGTH != 5
7228 # error Need to regenerate INVLIST_VERSION_ID by running perl -E 'say int(rand 2**31-1)', and then changing the #if to the new length
7236 S__new_invlist_C_array(pTHX_ UV* list)
7238 /* Return a pointer to a newly constructed inversion list, initialized to
7239 * point to <list>, which has to be in the exact correct inversion list
7240 * form, including internal fields. Thus this is a dangerous routine that
7241 * should not be used in the wrong hands */
7243 SV* invlist = newSV_type(SVt_PV);
7245 PERL_ARGS_ASSERT__NEW_INVLIST_C_ARRAY;
7247 SvPV_set(invlist, (char *) list);
7248 SvLEN_set(invlist, 0); /* Means we own the contents, and the system
7249 shouldn't touch it */
7250 SvCUR_set(invlist, TO_INTERNAL_SIZE(_invlist_len(invlist)));
7252 if (*get_invlist_version_id_addr(invlist) != INVLIST_VERSION_ID) {
7253 Perl_croak(aTHX_ "panic: Incorrect version for previously generated inversion list");
7256 /* Initialize the iteration pointer.
7257 * XXX This could be done at compile time in charclass_invlists.h, but I
7258 * (khw) am not confident that the suffixes for specifying the C constant
7259 * UV_MAX are portable, e.g. 'ull' on a 32 bit machine that is configured
7260 * to use 64 bits; might need a Configure probe */
7261 invlist_iterfinish(invlist);
7267 S_invlist_extend(pTHX_ SV* const invlist, const UV new_max)
7269 /* Grow the maximum size of an inversion list */
7271 PERL_ARGS_ASSERT_INVLIST_EXTEND;
7273 SvGROW((SV *)invlist, TO_INTERNAL_SIZE(new_max));
7276 PERL_STATIC_INLINE void
7277 S_invlist_trim(pTHX_ SV* const invlist)
7279 PERL_ARGS_ASSERT_INVLIST_TRIM;
7281 /* Change the length of the inversion list to how many entries it currently
7284 SvPV_shrink_to_cur((SV *) invlist);
7287 #define _invlist_union_complement_2nd(a, b, output) _invlist_union_maybe_complement_2nd(a, b, TRUE, output)
7290 S__append_range_to_invlist(pTHX_ SV* const invlist, const UV start, const UV end)
7292 /* Subject to change or removal. Append the range from 'start' to 'end' at
7293 * the end of the inversion list. The range must be above any existing
7297 UV max = invlist_max(invlist);
7298 UV len = _invlist_len(invlist);
7300 PERL_ARGS_ASSERT__APPEND_RANGE_TO_INVLIST;
7302 if (len == 0) { /* Empty lists must be initialized */
7303 array = _invlist_array_init(invlist, start == 0);
7306 /* Here, the existing list is non-empty. The current max entry in the
7307 * list is generally the first value not in the set, except when the
7308 * set extends to the end of permissible values, in which case it is
7309 * the first entry in that final set, and so this call is an attempt to
7310 * append out-of-order */
7312 UV final_element = len - 1;
7313 array = invlist_array(invlist);
7314 if (array[final_element] > start
7315 || ELEMENT_RANGE_MATCHES_INVLIST(final_element))
7317 Perl_croak(aTHX_ "panic: attempting to append to an inversion list, but wasn't at the end of the list, final=%"UVuf", start=%"UVuf", match=%c",
7318 array[final_element], start,
7319 ELEMENT_RANGE_MATCHES_INVLIST(final_element) ? 't' : 'f');
7322 /* Here, it is a legal append. If the new range begins with the first
7323 * value not in the set, it is extending the set, so the new first
7324 * value not in the set is one greater than the newly extended range.
7326 if (array[final_element] == start) {
7327 if (end != UV_MAX) {
7328 array[final_element] = end + 1;
7331 /* But if the end is the maximum representable on the machine,
7332 * just let the range that this would extend to have no end */
7333 invlist_set_len(invlist, len - 1);
7339 /* Here the new range doesn't extend any existing set. Add it */
7341 len += 2; /* Includes an element each for the start and end of range */
7343 /* If overflows the existing space, extend, which may cause the array to be
7346 invlist_extend(invlist, len);
7347 invlist_set_len(invlist, len); /* Have to set len here to avoid assert
7348 failure in invlist_array() */
7349 array = invlist_array(invlist);
7352 invlist_set_len(invlist, len);
7355 /* The next item on the list starts the range, the one after that is
7356 * one past the new range. */
7357 array[len - 2] = start;
7358 if (end != UV_MAX) {
7359 array[len - 1] = end + 1;
7362 /* But if the end is the maximum representable on the machine, just let
7363 * the range have no end */
7364 invlist_set_len(invlist, len - 1);
7368 #ifndef PERL_IN_XSUB_RE
7371 Perl__invlist_search(pTHX_ SV* const invlist, const UV cp)
7373 /* Searches the inversion list for the entry that contains the input code
7374 * point <cp>. If <cp> is not in the list, -1 is returned. Otherwise, the
7375 * return value is the index into the list's array of the range that
7380 IV high = _invlist_len(invlist);
7381 const IV highest_element = high - 1;
7384 PERL_ARGS_ASSERT__INVLIST_SEARCH;
7386 /* If list is empty, return failure. */
7391 /* (We can't get the array unless we know the list is non-empty) */
7392 array = invlist_array(invlist);
7394 mid = invlist_previous_index(invlist);
7395 assert(mid >=0 && mid <= highest_element);
7397 /* <mid> contains the cache of the result of the previous call to this
7398 * function (0 the first time). See if this call is for the same result,
7399 * or if it is for mid-1. This is under the theory that calls to this
7400 * function will often be for related code points that are near each other.
7401 * And benchmarks show that caching gives better results. We also test
7402 * here if the code point is within the bounds of the list. These tests
7403 * replace others that would have had to be made anyway to make sure that
7404 * the array bounds were not exceeded, and these give us extra information
7405 * at the same time */
7406 if (cp >= array[mid]) {
7407 if (cp >= array[highest_element]) {
7408 return highest_element;
7411 /* Here, array[mid] <= cp < array[highest_element]. This means that
7412 * the final element is not the answer, so can exclude it; it also
7413 * means that <mid> is not the final element, so can refer to 'mid + 1'
7415 if (cp < array[mid + 1]) {
7421 else { /* cp < aray[mid] */
7422 if (cp < array[0]) { /* Fail if outside the array */
7426 if (cp >= array[mid - 1]) {
7431 /* Binary search. What we are looking for is <i> such that
7432 * array[i] <= cp < array[i+1]
7433 * The loop below converges on the i+1. Note that there may not be an
7434 * (i+1)th element in the array, and things work nonetheless */
7435 while (low < high) {
7436 mid = (low + high) / 2;
7437 assert(mid <= highest_element);
7438 if (array[mid] <= cp) { /* cp >= array[mid] */
7441 /* We could do this extra test to exit the loop early.
7442 if (cp < array[low]) {
7447 else { /* cp < array[mid] */
7454 invlist_set_previous_index(invlist, high);
7459 Perl__invlist_populate_swatch(pTHX_ SV* const invlist, const UV start, const UV end, U8* swatch)
7461 /* populates a swatch of a swash the same way swatch_get() does in utf8.c,
7462 * but is used when the swash has an inversion list. This makes this much
7463 * faster, as it uses a binary search instead of a linear one. This is
7464 * intimately tied to that function, and perhaps should be in utf8.c,
7465 * except it is intimately tied to inversion lists as well. It assumes
7466 * that <swatch> is all 0's on input */
7469 const IV len = _invlist_len(invlist);
7473 PERL_ARGS_ASSERT__INVLIST_POPULATE_SWATCH;
7475 if (len == 0) { /* Empty inversion list */
7479 array = invlist_array(invlist);
7481 /* Find which element it is */
7482 i = _invlist_search(invlist, start);
7484 /* We populate from <start> to <end> */
7485 while (current < end) {
7488 /* The inversion list gives the results for every possible code point
7489 * after the first one in the list. Only those ranges whose index is
7490 * even are ones that the inversion list matches. For the odd ones,
7491 * and if the initial code point is not in the list, we have to skip
7492 * forward to the next element */
7493 if (i == -1 || ! ELEMENT_RANGE_MATCHES_INVLIST(i)) {
7495 if (i >= len) { /* Finished if beyond the end of the array */
7499 if (current >= end) { /* Finished if beyond the end of what we
7501 if (LIKELY(end < UV_MAX)) {
7505 /* We get here when the upper bound is the maximum
7506 * representable on the machine, and we are looking for just
7507 * that code point. Have to special case it */
7509 goto join_end_of_list;
7512 assert(current >= start);
7514 /* The current range ends one below the next one, except don't go past
7517 upper = (i < len && array[i] < end) ? array[i] : end;
7519 /* Here we are in a range that matches. Populate a bit in the 3-bit U8
7520 * for each code point in it */
7521 for (; current < upper; current++) {
7522 const STRLEN offset = (STRLEN)(current - start);
7523 swatch[offset >> 3] |= 1 << (offset & 7);
7528 /* Quit if at the end of the list */
7531 /* But first, have to deal with the highest possible code point on
7532 * the platform. The previous code assumes that <end> is one
7533 * beyond where we want to populate, but that is impossible at the
7534 * platform's infinity, so have to handle it specially */
7535 if (UNLIKELY(end == UV_MAX && ELEMENT_RANGE_MATCHES_INVLIST(len-1)))
7537 const STRLEN offset = (STRLEN)(end - start);
7538 swatch[offset >> 3] |= 1 << (offset & 7);
7543 /* Advance to the next range, which will be for code points not in the
7552 Perl__invlist_union_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** output)
7554 /* Take the union of two inversion lists and point <output> to it. *output
7555 * SHOULD BE DEFINED upon input, and if it points to one of the two lists,
7556 * the reference count to that list will be decremented. The first list,
7557 * <a>, may be NULL, in which case a copy of the second list is returned.
7558 * If <complement_b> is TRUE, the union is taken of the complement
7559 * (inversion) of <b> instead of b itself.
7561 * The basis for this comes from "Unicode Demystified" Chapter 13 by
7562 * Richard Gillam, published by Addison-Wesley, and explained at some
7563 * length there. The preface says to incorporate its examples into your
7564 * code at your own risk.
7566 * The algorithm is like a merge sort.
7568 * XXX A potential performance improvement is to keep track as we go along
7569 * if only one of the inputs contributes to the result, meaning the other
7570 * is a subset of that one. In that case, we can skip the final copy and
7571 * return the larger of the input lists, but then outside code might need
7572 * to keep track of whether to free the input list or not */
7574 UV* array_a; /* a's array */
7576 UV len_a; /* length of a's array */
7579 SV* u; /* the resulting union */
7583 UV i_a = 0; /* current index into a's array */
7587 /* running count, as explained in the algorithm source book; items are
7588 * stopped accumulating and are output when the count changes to/from 0.
7589 * The count is incremented when we start a range that's in the set, and
7590 * decremented when we start a range that's not in the set. So its range
7591 * is 0 to 2. Only when the count is zero is something not in the set.
7595 PERL_ARGS_ASSERT__INVLIST_UNION_MAYBE_COMPLEMENT_2ND;
7598 /* If either one is empty, the union is the other one */
7599 if (a == NULL || ((len_a = _invlist_len(a)) == 0)) {
7606 *output = invlist_clone(b);
7608 _invlist_invert(*output);
7610 } /* else *output already = b; */
7613 else if ((len_b = _invlist_len(b)) == 0) {
7618 /* The complement of an empty list is a list that has everything in it,
7619 * so the union with <a> includes everything too */
7624 *output = _new_invlist(1);
7625 _append_range_to_invlist(*output, 0, UV_MAX);
7627 else if (*output != a) {
7628 *output = invlist_clone(a);
7630 /* else *output already = a; */
7634 /* Here both lists exist and are non-empty */
7635 array_a = invlist_array(a);
7636 array_b = invlist_array(b);
7638 /* If are to take the union of 'a' with the complement of b, set it
7639 * up so are looking at b's complement. */
7642 /* To complement, we invert: if the first element is 0, remove it. To
7643 * do this, we just pretend the array starts one later, and clear the
7644 * flag as we don't have to do anything else later */
7645 if (array_b[0] == 0) {
7648 complement_b = FALSE;
7652 /* But if the first element is not zero, we unshift a 0 before the
7653 * array. The data structure reserves a space for that 0 (which
7654 * should be a '1' right now), so physical shifting is unneeded,
7655 * but temporarily change that element to 0. Before exiting the
7656 * routine, we must restore the element to '1' */
7663 /* Size the union for the worst case: that the sets are completely
7665 u = _new_invlist(len_a + len_b);
7667 /* Will contain U+0000 if either component does */
7668 array_u = _invlist_array_init(u, (len_a > 0 && array_a[0] == 0)
7669 || (len_b > 0 && array_b[0] == 0));
7671 /* Go through each list item by item, stopping when exhausted one of
7673 while (i_a < len_a && i_b < len_b) {
7674 UV cp; /* The element to potentially add to the union's array */
7675 bool cp_in_set; /* is it in the the input list's set or not */
7677 /* We need to take one or the other of the two inputs for the union.
7678 * Since we are merging two sorted lists, we take the smaller of the
7679 * next items. In case of a tie, we take the one that is in its set
7680 * first. If we took one not in the set first, it would decrement the
7681 * count, possibly to 0 which would cause it to be output as ending the
7682 * range, and the next time through we would take the same number, and
7683 * output it again as beginning the next range. By doing it the
7684 * opposite way, there is no possibility that the count will be
7685 * momentarily decremented to 0, and thus the two adjoining ranges will
7686 * be seamlessly merged. (In a tie and both are in the set or both not
7687 * in the set, it doesn't matter which we take first.) */
7688 if (array_a[i_a] < array_b[i_b]
7689 || (array_a[i_a] == array_b[i_b]
7690 && ELEMENT_RANGE_MATCHES_INVLIST(i_a)))
7692 cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_a);
7696 cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_b);
7697 cp = array_b[i_b++];
7700 /* Here, have chosen which of the two inputs to look at. Only output
7701 * if the running count changes to/from 0, which marks the
7702 * beginning/end of a range in that's in the set */
7705 array_u[i_u++] = cp;
7712 array_u[i_u++] = cp;
7717 /* Here, we are finished going through at least one of the lists, which
7718 * means there is something remaining in at most one. We check if the list
7719 * that hasn't been exhausted is positioned such that we are in the middle
7720 * of a range in its set or not. (i_a and i_b point to the element beyond
7721 * the one we care about.) If in the set, we decrement 'count'; if 0, there
7722 * is potentially more to output.
7723 * There are four cases:
7724 * 1) Both weren't in their sets, count is 0, and remains 0. What's left
7725 * in the union is entirely from the non-exhausted set.
7726 * 2) Both were in their sets, count is 2. Nothing further should
7727 * be output, as everything that remains will be in the exhausted
7728 * list's set, hence in the union; decrementing to 1 but not 0 insures
7730 * 3) the exhausted was in its set, non-exhausted isn't, count is 1.
7731 * Nothing further should be output because the union includes
7732 * everything from the exhausted set. Not decrementing ensures that.
7733 * 4) the exhausted wasn't in its set, non-exhausted is, count is 1;
7734 * decrementing to 0 insures that we look at the remainder of the
7735 * non-exhausted set */
7736 if ((i_a != len_a && PREV_RANGE_MATCHES_INVLIST(i_a))
7737 || (i_b != len_b && PREV_RANGE_MATCHES_INVLIST(i_b)))
7742 /* The final length is what we've output so far, plus what else is about to
7743 * be output. (If 'count' is non-zero, then the input list we exhausted
7744 * has everything remaining up to the machine's limit in its set, and hence
7745 * in the union, so there will be no further output. */
7748 /* At most one of the subexpressions will be non-zero */
7749 len_u += (len_a - i_a) + (len_b - i_b);
7752 /* Set result to final length, which can change the pointer to array_u, so
7754 if (len_u != _invlist_len(u)) {
7755 invlist_set_len(u, len_u);
7757 array_u = invlist_array(u);
7760 /* When 'count' is 0, the list that was exhausted (if one was shorter than
7761 * the other) ended with everything above it not in its set. That means
7762 * that the remaining part of the union is precisely the same as the
7763 * non-exhausted list, so can just copy it unchanged. (If both list were
7764 * exhausted at the same time, then the operations below will be both 0.)
7767 IV copy_count; /* At most one will have a non-zero copy count */
7768 if ((copy_count = len_a - i_a) > 0) {
7769 Copy(array_a + i_a, array_u + i_u, copy_count, UV);
7771 else if ((copy_count = len_b - i_b) > 0) {
7772 Copy(array_b + i_b, array_u + i_u, copy_count, UV);
7776 /* If we've changed b, restore it */
7781 /* We may be removing a reference to one of the inputs */
7782 if (a == *output || b == *output) {
7783 assert(! invlist_is_iterating(*output));
7784 SvREFCNT_dec_NN(*output);
7792 Perl__invlist_intersection_maybe_complement_2nd(pTHX_ SV* const a, SV* const b, bool complement_b, SV** i)
7794 /* Take the intersection of two inversion lists and point <i> to it. *i
7795 * SHOULD BE DEFINED upon input, and if it points to one of the two lists,
7796 * the reference count to that list will be decremented.
7797 * If <complement_b> is TRUE, the result will be the intersection of <a>
7798 * and the complement (or inversion) of <b> instead of <b> directly.
7800 * The basis for this comes from "Unicode Demystified" Chapter 13 by
7801 * Richard Gillam, published by Addison-Wesley, and explained at some
7802 * length there. The preface says to incorporate its examples into your
7803 * code at your own risk. In fact, it had bugs
7805 * The algorithm is like a merge sort, and is essentially the same as the
7809 UV* array_a; /* a's array */
7811 UV len_a; /* length of a's array */
7814 SV* r; /* the resulting intersection */
7818 UV i_a = 0; /* current index into a's array */
7822 /* running count, as explained in the algorithm source book; items are
7823 * stopped accumulating and are output when the count changes to/from 2.
7824 * The count is incremented when we start a range that's in the set, and
7825 * decremented when we start a range that's not in the set. So its range
7826 * is 0 to 2. Only when the count is 2 is something in the intersection.
7830 PERL_ARGS_ASSERT__INVLIST_INTERSECTION_MAYBE_COMPLEMENT_2ND;
7833 /* Special case if either one is empty */
7834 len_a = _invlist_len(a);
7835 if ((len_a == 0) || ((len_b = _invlist_len(b)) == 0)) {
7837 if (len_a != 0 && complement_b) {
7839 /* Here, 'a' is not empty, therefore from the above 'if', 'b' must
7840 * be empty. Here, also we are using 'b's complement, which hence
7841 * must be every possible code point. Thus the intersection is
7844 *i = invlist_clone(a);
7850 /* else *i is already 'a' */
7854 /* Here, 'a' or 'b' is empty and not using the complement of 'b'. The
7855 * intersection must be empty */
7862 *i = _new_invlist(0);
7866 /* Here both lists exist and are non-empty */
7867 array_a = invlist_array(a);
7868 array_b = invlist_array(b);
7870 /* If are to take the intersection of 'a' with the complement of b, set it
7871 * up so are looking at b's complement. */
7874 /* To complement, we invert: if the first element is 0, remove it. To
7875 * do this, we just pretend the array starts one later, and clear the
7876 * flag as we don't have to do anything else later */
7877 if (array_b[0] == 0) {
7880 complement_b = FALSE;
7884 /* But if the first element is not zero, we unshift a 0 before the
7885 * array. The data structure reserves a space for that 0 (which
7886 * should be a '1' right now), so physical shifting is unneeded,
7887 * but temporarily change that element to 0. Before exiting the
7888 * routine, we must restore the element to '1' */
7895 /* Size the intersection for the worst case: that the intersection ends up
7896 * fragmenting everything to be completely disjoint */
7897 r= _new_invlist(len_a + len_b);
7899 /* Will contain U+0000 iff both components do */
7900 array_r = _invlist_array_init(r, len_a > 0 && array_a[0] == 0
7901 && len_b > 0 && array_b[0] == 0);
7903 /* Go through each list item by item, stopping when exhausted one of
7905 while (i_a < len_a && i_b < len_b) {
7906 UV cp; /* The element to potentially add to the intersection's
7908 bool cp_in_set; /* Is it in the input list's set or not */
7910 /* We need to take one or the other of the two inputs for the
7911 * intersection. Since we are merging two sorted lists, we take the
7912 * smaller of the next items. In case of a tie, we take the one that
7913 * is not in its set first (a difference from the union algorithm). If
7914 * we took one in the set first, it would increment the count, possibly
7915 * to 2 which would cause it to be output as starting a range in the
7916 * intersection, and the next time through we would take that same
7917 * number, and output it again as ending the set. By doing it the
7918 * opposite of this, there is no possibility that the count will be
7919 * momentarily incremented to 2. (In a tie and both are in the set or
7920 * both not in the set, it doesn't matter which we take first.) */
7921 if (array_a[i_a] < array_b[i_b]
7922 || (array_a[i_a] == array_b[i_b]
7923 && ! ELEMENT_RANGE_MATCHES_INVLIST(i_a)))
7925 cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_a);
7929 cp_in_set = ELEMENT_RANGE_MATCHES_INVLIST(i_b);
7933 /* Here, have chosen which of the two inputs to look at. Only output
7934 * if the running count changes to/from 2, which marks the
7935 * beginning/end of a range that's in the intersection */
7939 array_r[i_r++] = cp;
7944 array_r[i_r++] = cp;
7950 /* Here, we are finished going through at least one of the lists, which
7951 * means there is something remaining in at most one. We check if the list
7952 * that has been exhausted is positioned such that we are in the middle
7953 * of a range in its set or not. (i_a and i_b point to elements 1 beyond
7954 * the ones we care about.) There are four cases:
7955 * 1) Both weren't in their sets, count is 0, and remains 0. There's
7956 * nothing left in the intersection.
7957 * 2) Both were in their sets, count is 2 and perhaps is incremented to
7958 * above 2. What should be output is exactly that which is in the
7959 * non-exhausted set, as everything it has is also in the intersection
7960 * set, and everything it doesn't have can't be in the intersection
7961 * 3) The exhausted was in its set, non-exhausted isn't, count is 1, and
7962 * gets incremented to 2. Like the previous case, the intersection is
7963 * everything that remains in the non-exhausted set.
7964 * 4) the exhausted wasn't in its set, non-exhausted is, count is 1, and
7965 * remains 1. And the intersection has nothing more. */
7966 if ((i_a == len_a && PREV_RANGE_MATCHES_INVLIST(i_a))
7967 || (i_b == len_b && PREV_RANGE_MATCHES_INVLIST(i_b)))
7972 /* The final length is what we've output so far plus what else is in the
7973 * intersection. At most one of the subexpressions below will be non-zero */
7976 len_r += (len_a - i_a) + (len_b - i_b);
7979 /* Set result to final length, which can change the pointer to array_r, so
7981 if (len_r != _invlist_len(r)) {
7982 invlist_set_len(r, len_r);
7984 array_r = invlist_array(r);
7987 /* Finish outputting any remaining */
7988 if (count >= 2) { /* At most one will have a non-zero copy count */
7990 if ((copy_count = len_a - i_a) > 0) {
7991 Copy(array_a + i_a, array_r + i_r, copy_count, UV);
7993 else if ((copy_count = len_b - i_b) > 0) {
7994 Copy(array_b + i_b, array_r + i_r, copy_count, UV);
7998 /* If we've changed b, restore it */
8003 /* We may be removing a reference to one of the inputs */
8004 if (a == *i || b == *i) {
8005 assert(! invlist_is_iterating(*i));
8006 SvREFCNT_dec_NN(*i);
8014 Perl__add_range_to_invlist(pTHX_ SV* invlist, const UV start, const UV end)
8016 /* Add the range from 'start' to 'end' inclusive to the inversion list's
8017 * set. A pointer to the inversion list is returned. This may actually be
8018 * a new list, in which case the passed in one has been destroyed. The
8019 * passed in inversion list can be NULL, in which case a new one is created
8020 * with just the one range in it */
8025 if (invlist == NULL) {
8026 invlist = _new_invlist(2);
8030 len = _invlist_len(invlist);
8033 /* If comes after the final entry actually in the list, can just append it
8036 || (! ELEMENT_RANGE_MATCHES_INVLIST(len - 1)
8037 && start >= invlist_array(invlist)[len - 1]))
8039 _append_range_to_invlist(invlist, start, end);
8043 /* Here, can't just append things, create and return a new inversion list
8044 * which is the union of this range and the existing inversion list */
8045 range_invlist = _new_invlist(2);
8046 _append_range_to_invlist(range_invlist, start, end);
8048 _invlist_union(invlist, range_invlist, &invlist);
8050 /* The temporary can be freed */
8051 SvREFCNT_dec_NN(range_invlist);
8058 PERL_STATIC_INLINE SV*
8059 S_add_cp_to_invlist(pTHX_ SV* invlist, const UV cp) {
8060 return _add_range_to_invlist(invlist, cp, cp);
8063 #ifndef PERL_IN_XSUB_RE
8065 Perl__invlist_invert(pTHX_ SV* const invlist)
8067 /* Complement the input inversion list. This adds a 0 if the list didn't
8068 * have a zero; removes it otherwise. As described above, the data
8069 * structure is set up so that this is very efficient */
8071 UV* len_pos = _get_invlist_len_addr(invlist);
8073 PERL_ARGS_ASSERT__INVLIST_INVERT;
8075 assert(! invlist_is_iterating(invlist));
8077 /* The inverse of matching nothing is matching everything */
8078 if (*len_pos == 0) {
8079 _append_range_to_invlist(invlist, 0, UV_MAX);
8083 /* The exclusive or complents 0 to 1; and 1 to 0. If the result is 1, the
8084 * zero element was a 0, so it is being removed, so the length decrements
8085 * by 1; and vice-versa. SvCUR is unaffected */
8086 if (*get_invlist_zero_addr(invlist) ^= 1) {
8095 Perl__invlist_invert_prop(pTHX_ SV* const invlist)
8097 /* Complement the input inversion list (which must be a Unicode property,
8098 * all of which don't match above the Unicode maximum code point.) And
8099 * Perl has chosen to not have the inversion match above that either. This
8100 * adds a 0x110000 if the list didn't end with it, and removes it if it did
8106 PERL_ARGS_ASSERT__INVLIST_INVERT_PROP;
8108 _invlist_invert(invlist);
8110 len = _invlist_len(invlist);
8112 if (len != 0) { /* If empty do nothing */
8113 array = invlist_array(invlist);
8114 if (array[len - 1] != PERL_UNICODE_MAX + 1) {
8115 /* Add 0x110000. First, grow if necessary */
8117 if (invlist_max(invlist) < len) {
8118 invlist_extend(invlist, len);
8119 array = invlist_array(invlist);
8121 invlist_set_len(invlist, len);
8122 array[len - 1] = PERL_UNICODE_MAX + 1;
8124 else { /* Remove the 0x110000 */
8125 invlist_set_len(invlist, len - 1);
8133 PERL_STATIC_INLINE SV*
8134 S_invlist_clone(pTHX_ SV* const invlist)
8137 /* Return a new inversion list that is a copy of the input one, which is
8140 /* Need to allocate extra space to accommodate Perl's addition of a
8141 * trailing NUL to SvPV's, since it thinks they are always strings */
8142 SV* new_invlist = _new_invlist(_invlist_len(invlist) + 1);
8143 STRLEN length = SvCUR(invlist);
8145 PERL_ARGS_ASSERT_INVLIST_CLONE;
8147 SvCUR_set(new_invlist, length); /* This isn't done automatically */
8148 Copy(SvPVX(invlist), SvPVX(new_invlist), length, char);
8153 PERL_STATIC_INLINE UV*
8154 S_get_invlist_iter_addr(pTHX_ SV* invlist)
8156 /* Return the address of the UV that contains the current iteration
8159 PERL_ARGS_ASSERT_GET_INVLIST_ITER_ADDR;
8161 return (UV *) (SvPVX(invlist) + (INVLIST_ITER_OFFSET * sizeof (UV)));
8164 PERL_STATIC_INLINE UV*
8165 S_get_invlist_version_id_addr(pTHX_ SV* invlist)
8167 /* Return the address of the UV that contains the version id. */
8169 PERL_ARGS_ASSERT_GET_INVLIST_VERSION_ID_ADDR;
8171 return (UV *) (SvPVX(invlist) + (INVLIST_VERSION_ID_OFFSET * sizeof (UV)));
8174 PERL_STATIC_INLINE void
8175 S_invlist_iterinit(pTHX_ SV* invlist) /* Initialize iterator for invlist */
8177 PERL_ARGS_ASSERT_INVLIST_ITERINIT;
8179 *get_invlist_iter_addr(invlist) = 0;
8182 PERL_STATIC_INLINE void
8183 S_invlist_iterfinish(pTHX_ SV* invlist)
8185 /* Terminate iterator for invlist. This is to catch development errors.
8186 * Any iteration that is interrupted before completed should call this
8187 * function. Functions that add code points anywhere else but to the end
8188 * of an inversion list assert that they are not in the middle of an
8189 * iteration. If they were, the addition would make the iteration
8190 * problematical: if the iteration hadn't reached the place where things
8191 * were being added, it would be ok */
8193 PERL_ARGS_ASSERT_INVLIST_ITERFINISH;
8195 *get_invlist_iter_addr(invlist) = UV_MAX;
8199 S_invlist_iternext(pTHX_ SV* invlist, UV* start, UV* end)
8201 /* An C<invlist_iterinit> call on <invlist> must be used to set this up.
8202 * This call sets in <*start> and <*end>, the next range in <invlist>.
8203 * Returns <TRUE> if successful and the next call will return the next
8204 * range; <FALSE> if was already at the end of the list. If the latter,
8205 * <*start> and <*end> are unchanged, and the next call to this function
8206 * will start over at the beginning of the list */
8208 UV* pos = get_invlist_iter_addr(invlist);
8209 UV len = _invlist_len(invlist);
8212 PERL_ARGS_ASSERT_INVLIST_ITERNEXT;
8215 *pos = UV_MAX; /* Force iterinit() to be required next time */
8219 array = invlist_array(invlist);
8221 *start = array[(*pos)++];
8227 *end = array[(*pos)++] - 1;
8233 PERL_STATIC_INLINE bool
8234 S_invlist_is_iterating(pTHX_ SV* const invlist)
8236 PERL_ARGS_ASSERT_INVLIST_IS_ITERATING;
8238 return *(get_invlist_iter_addr(invlist)) < UV_MAX;
8241 PERL_STATIC_INLINE UV
8242 S_invlist_highest(pTHX_ SV* const invlist)
8244 /* Returns the highest code point that matches an inversion list. This API
8245 * has an ambiguity, as it returns 0 under either the highest is actually
8246 * 0, or if the list is empty. If this distinction matters to you, check
8247 * for emptiness before calling this function */
8249 UV len = _invlist_len(invlist);
8252 PERL_ARGS_ASSERT_INVLIST_HIGHEST;
8258 array = invlist_array(invlist);
8260 /* The last element in the array in the inversion list always starts a
8261 * range that goes to infinity. That range may be for code points that are
8262 * matched in the inversion list, or it may be for ones that aren't
8263 * matched. In the latter case, the highest code point in the set is one
8264 * less than the beginning of this range; otherwise it is the final element
8265 * of this range: infinity */
8266 return (ELEMENT_RANGE_MATCHES_INVLIST(len - 1))
8268 : array[len - 1] - 1;
8271 #ifndef PERL_IN_XSUB_RE
8273 Perl__invlist_contents(pTHX_ SV* const invlist)
8275 /* Get the contents of an inversion list into a string SV so that they can
8276 * be printed out. It uses the format traditionally done for debug tracing
8280 SV* output = newSVpvs("\n");
8282 PERL_ARGS_ASSERT__INVLIST_CONTENTS;
8284 assert(! invlist_is_iterating(invlist));
8286 invlist_iterinit(invlist);
8287 while (invlist_iternext(invlist, &start, &end)) {
8288 if (end == UV_MAX) {
8289 Perl_sv_catpvf(aTHX_ output, "%04"UVXf"\tINFINITY\n", start);
8291 else if (end != start) {
8292 Perl_sv_catpvf(aTHX_ output, "%04"UVXf"\t%04"UVXf"\n",
8296 Perl_sv_catpvf(aTHX_ output, "%04"UVXf"\n", start);
8304 #ifdef PERL_ARGS_ASSERT__INVLIST_DUMP
8306 Perl__invlist_dump(pTHX_ SV* const invlist, const char * const header)
8308 /* Dumps out the ranges in an inversion list. The string 'header'
8309 * if present is output on a line before the first range */
8313 PERL_ARGS_ASSERT__INVLIST_DUMP;
8315 if (header && strlen(header)) {
8316 PerlIO_printf(Perl_debug_log, "%s\n", header);
8318 if (invlist_is_iterating(invlist)) {
8319 PerlIO_printf(Perl_debug_log, "Can't dump because is in middle of iterating\n");
8323 invlist_iterinit(invlist);
8324 while (invlist_iternext(invlist, &start, &end)) {
8325 if (end == UV_MAX) {
8326 PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. INFINITY\n", start);
8328 else if (end != start) {
8329 PerlIO_printf(Perl_debug_log, "0x%04"UVXf" .. 0x%04"UVXf"\n",
8333 PerlIO_printf(Perl_debug_log, "0x%04"UVXf"\n", start);
8341 S__invlistEQ(pTHX_ SV* const a, SV* const b, bool complement_b)
8343 /* Return a boolean as to if the two passed in inversion lists are
8344 * identical. The final argument, if TRUE, says to take the complement of
8345 * the second inversion list before doing the comparison */
8347 UV* array_a = invlist_array(a);
8348 UV* array_b = invlist_array(b);
8349 UV len_a = _invlist_len(a);
8350 UV len_b = _invlist_len(b);
8352 UV i = 0; /* current index into the arrays */
8353 bool retval = TRUE; /* Assume are identical until proven otherwise */
8355 PERL_ARGS_ASSERT__INVLISTEQ;
8357 /* If are to compare 'a' with the complement of b, set it
8358 * up so are looking at b's complement. */
8361 /* The complement of nothing is everything, so <a> would have to have
8362 * just one element, starting at zero (ending at infinity) */
8364 return (len_a == 1 && array_a[0] == 0);
8366 else if (array_b[0] == 0) {
8368 /* Otherwise, to complement, we invert. Here, the first element is
8369 * 0, just remove it. To do this, we just pretend the array starts
8370 * one later, and clear the flag as we don't have to do anything
8375 complement_b = FALSE;
8379 /* But if the first element is not zero, we unshift a 0 before the
8380 * array. The data structure reserves a space for that 0 (which
8381 * should be a '1' right now), so physical shifting is unneeded,
8382 * but temporarily change that element to 0. Before exiting the
8383 * routine, we must restore the element to '1' */
8390 /* Make sure that the lengths are the same, as well as the final element
8391 * before looping through the remainder. (Thus we test the length, final,
8392 * and first elements right off the bat) */
8393 if (len_a != len_b || array_a[len_a-1] != array_b[len_a-1]) {
8396 else for (i = 0; i < len_a - 1; i++) {
8397 if (array_a[i] != array_b[i]) {
8410 #undef HEADER_LENGTH
8411 #undef INVLIST_INITIAL_LENGTH
8412 #undef TO_INTERNAL_SIZE
8413 #undef FROM_INTERNAL_SIZE
8414 #undef INVLIST_LEN_OFFSET
8415 #undef INVLIST_ZERO_OFFSET
8416 #undef INVLIST_ITER_OFFSET
8417 #undef INVLIST_VERSION_ID
8418 #undef INVLIST_PREVIOUS_INDEX_OFFSET
8420 /* End of inversion list object */
8423 S_parse_lparen_question_flags(pTHX_ struct RExC_state_t *pRExC_state)
8425 /* This parses the flags that are in either the '(?foo)' or '(?foo:bar)'
8426 * constructs, and updates RExC_flags with them. On input, RExC_parse
8427 * should point to the first flag; it is updated on output to point to the
8428 * final ')' or ':'. There needs to be at least one flag, or this will
8431 /* for (?g), (?gc), and (?o) warnings; warning
8432 about (?c) will warn about (?g) -- japhy */
8434 #define WASTED_O 0x01
8435 #define WASTED_G 0x02
8436 #define WASTED_C 0x04
8437 #define WASTED_GC (WASTED_G|WASTED_C)
8438 I32 wastedflags = 0x00;
8439 U32 posflags = 0, negflags = 0;
8440 U32 *flagsp = &posflags;
8441 char has_charset_modifier = '\0';
8443 bool has_use_defaults = FALSE;
8444 const char* const seqstart = RExC_parse - 1; /* Point to the '?' */
8446 PERL_ARGS_ASSERT_PARSE_LPAREN_QUESTION_FLAGS;
8448 /* '^' as an initial flag sets certain defaults */
8449 if (UCHARAT(RExC_parse) == '^') {
8451 has_use_defaults = TRUE;
8452 STD_PMMOD_FLAGS_CLEAR(&RExC_flags);
8453 set_regex_charset(&RExC_flags, (RExC_utf8 || RExC_uni_semantics)
8454 ? REGEX_UNICODE_CHARSET
8455 : REGEX_DEPENDS_CHARSET);
8458 cs = get_regex_charset(RExC_flags);
8459 if (cs == REGEX_DEPENDS_CHARSET
8460 && (RExC_utf8 || RExC_uni_semantics))
8462 cs = REGEX_UNICODE_CHARSET;
8465 while (*RExC_parse) {
8466 /* && strchr("iogcmsx", *RExC_parse) */
8467 /* (?g), (?gc) and (?o) are useless here
8468 and must be globally applied -- japhy */
8469 switch (*RExC_parse) {
8471 /* Code for the imsx flags */
8472 CASE_STD_PMMOD_FLAGS_PARSE_SET(flagsp);
8474 case LOCALE_PAT_MOD:
8475 if (has_charset_modifier) {
8476 goto excess_modifier;
8478 else if (flagsp == &negflags) {
8481 cs = REGEX_LOCALE_CHARSET;
8482 has_charset_modifier = LOCALE_PAT_MOD;
8483 RExC_contains_locale = 1;
8485 case UNICODE_PAT_MOD:
8486 if (has_charset_modifier) {
8487 goto excess_modifier;
8489 else if (flagsp == &negflags) {
8492 cs = REGEX_UNICODE_CHARSET;
8493 has_charset_modifier = UNICODE_PAT_MOD;
8495 case ASCII_RESTRICT_PAT_MOD:
8496 if (flagsp == &negflags) {
8499 if (has_charset_modifier) {
8500 if (cs != REGEX_ASCII_RESTRICTED_CHARSET) {
8501 goto excess_modifier;
8503 /* Doubled modifier implies more restricted */
8504 cs = REGEX_ASCII_MORE_RESTRICTED_CHARSET;
8507 cs = REGEX_ASCII_RESTRICTED_CHARSET;
8509 has_charset_modifier = ASCII_RESTRICT_PAT_MOD;
8511 case DEPENDS_PAT_MOD:
8512 if (has_use_defaults) {
8513 goto fail_modifiers;
8515 else if (flagsp == &negflags) {
8518 else if (has_charset_modifier) {
8519 goto excess_modifier;
8522 /* The dual charset means unicode semantics if the
8523 * pattern (or target, not known until runtime) are
8524 * utf8, or something in the pattern indicates unicode
8526 cs = (RExC_utf8 || RExC_uni_semantics)
8527 ? REGEX_UNICODE_CHARSET
8528 : REGEX_DEPENDS_CHARSET;
8529 has_charset_modifier = DEPENDS_PAT_MOD;
8533 if (has_charset_modifier == ASCII_RESTRICT_PAT_MOD) {
8534 vFAIL2("Regexp modifier \"%c\" may appear a maximum of twice", ASCII_RESTRICT_PAT_MOD);
8536 else if (has_charset_modifier == *(RExC_parse - 1)) {
8537 vFAIL2("Regexp modifier \"%c\" may not appear twice", *(RExC_parse - 1));
8540 vFAIL3("Regexp modifiers \"%c\" and \"%c\" are mutually exclusive", has_charset_modifier, *(RExC_parse - 1));
8545 vFAIL2("Regexp modifier \"%c\" may not appear after the \"-\"", *(RExC_parse - 1));
8547 case ONCE_PAT_MOD: /* 'o' */
8548 case GLOBAL_PAT_MOD: /* 'g' */
8549 if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
8550 const I32 wflagbit = *RExC_parse == 'o' ? WASTED_O : WASTED_G;
8551 if (! (wastedflags & wflagbit) ) {
8552 wastedflags |= wflagbit;
8553 /* diag_listed_as: Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in m/%s/ */
8556 "Useless (%s%c) - %suse /%c modifier",
8557 flagsp == &negflags ? "?-" : "?",
8559 flagsp == &negflags ? "don't " : "",
8566 case CONTINUE_PAT_MOD: /* 'c' */
8567 if (SIZE_ONLY && ckWARN(WARN_REGEXP)) {
8568 if (! (wastedflags & WASTED_C) ) {
8569 wastedflags |= WASTED_GC;
8570 /* diag_listed_as: Useless (?-%s) - don't use /%s modifier in regex; marked by <-- HERE in m/%s/ */
8573 "Useless (%sc) - %suse /gc modifier",
8574 flagsp == &negflags ? "?-" : "?",
8575 flagsp == &negflags ? "don't " : ""
8580 case KEEPCOPY_PAT_MOD: /* 'p' */
8581 if (flagsp == &negflags) {
8583 ckWARNreg(RExC_parse + 1,"Useless use of (?-p)");
8585 *flagsp |= RXf_PMf_KEEPCOPY;
8589 /* A flag is a default iff it is following a minus, so
8590 * if there is a minus, it means will be trying to
8591 * re-specify a default which is an error */
8592 if (has_use_defaults || flagsp == &negflags) {
8593 goto fail_modifiers;
8596 wastedflags = 0; /* reset so (?g-c) warns twice */
8600 RExC_flags |= posflags;
8601 RExC_flags &= ~negflags;
8602 set_regex_charset(&RExC_flags, cs);
8608 vFAIL3("Sequence (%.*s...) not recognized",
8609 RExC_parse-seqstart, seqstart);
8618 - reg - regular expression, i.e. main body or parenthesized thing
8620 * Caller must absorb opening parenthesis.
8622 * Combining parenthesis handling with the base level of regular expression
8623 * is a trifle forced, but the need to tie the tails of the branches to what
8624 * follows makes it hard to avoid.
8626 #define REGTAIL(x,y,z) regtail((x),(y),(z),depth+1)
8628 #define REGTAIL_STUDY(x,y,z) regtail_study((x),(y),(z),depth+1)
8630 #define REGTAIL_STUDY(x,y,z) regtail((x),(y),(z),depth+1)
8633 /* Returns NULL, setting *flagp to TRYAGAIN at the end of (?) that only sets
8634 flags. Returns NULL, setting *flagp to RESTART_UTF8 if the sizing scan
8635 needs to be restarted.
8636 Otherwise would only return NULL if regbranch() returns NULL, which
8639 S_reg(pTHX_ RExC_state_t *pRExC_state, I32 paren, I32 *flagp,U32 depth)
8640 /* paren: Parenthesized? 0=top; 1,2=inside '(': changed to letter.
8641 * 2 is like 1, but indicates that nextchar() has been called to advance
8642 * RExC_parse beyond the '('. Things like '(?' are indivisible tokens, and
8643 * this flag alerts us to the need to check for that */
8646 regnode *ret; /* Will be the head of the group. */
8649 regnode *ender = NULL;
8652 U32 oregflags = RExC_flags;
8653 bool have_branch = 0;
8655 I32 freeze_paren = 0;
8656 I32 after_freeze = 0;
8658 char * parse_start = RExC_parse; /* MJD */
8659 char * const oregcomp_parse = RExC_parse;
8661 GET_RE_DEBUG_FLAGS_DECL;
8663 PERL_ARGS_ASSERT_REG;
8664 DEBUG_PARSE("reg ");
8666 *flagp = 0; /* Tentatively. */
8669 /* Make an OPEN node, if parenthesized. */
8672 /* Under /x, space and comments can be gobbled up between the '(' and
8673 * here (if paren ==2). The forms '(*VERB' and '(?...' disallow such
8674 * intervening space, as the sequence is a token, and a token should be
8676 bool has_intervening_patws = paren == 2 && *(RExC_parse - 1) != '(';
8678 if ( *RExC_parse == '*') { /* (*VERB:ARG) */
8679 char *start_verb = RExC_parse;
8680 STRLEN verb_len = 0;
8681 char *start_arg = NULL;
8682 unsigned char op = 0;
8684 int internal_argval = 0; /* internal_argval is only useful if !argok */
8686 if (has_intervening_patws && SIZE_ONLY) {
8687 ckWARNregdep(RExC_parse + 1, "In '(*VERB...)', splitting the initial '(*' is deprecated");
8689 while ( *RExC_parse && *RExC_parse != ')' ) {
8690 if ( *RExC_parse == ':' ) {
8691 start_arg = RExC_parse + 1;
8697 verb_len = RExC_parse - start_verb;
8700 while ( *RExC_parse && *RExC_parse != ')' )
8702 if ( *RExC_parse != ')' )
8703 vFAIL("Unterminated verb pattern argument");
8704 if ( RExC_parse == start_arg )
8707 if ( *RExC_parse != ')' )
8708 vFAIL("Unterminated verb pattern");
8711 switch ( *start_verb ) {
8712 case 'A': /* (*ACCEPT) */
8713 if ( memEQs(start_verb,verb_len,"ACCEPT") ) {
8715 internal_argval = RExC_nestroot;
8718 case 'C': /* (*COMMIT) */
8719 if ( memEQs(start_verb,verb_len,"COMMIT") )
8722 case 'F': /* (*FAIL) */
8723 if ( verb_len==1 || memEQs(start_verb,verb_len,"FAIL") ) {
8728 case ':': /* (*:NAME) */
8729 case 'M': /* (*MARK:NAME) */
8730 if ( verb_len==0 || memEQs(start_verb,verb_len,"MARK") ) {
8735 case 'P': /* (*PRUNE) */
8736 if ( memEQs(start_verb,verb_len,"PRUNE") )
8739 case 'S': /* (*SKIP) */
8740 if ( memEQs(start_verb,verb_len,"SKIP") )
8743 case 'T': /* (*THEN) */
8744 /* [19:06] <TimToady> :: is then */
8745 if ( memEQs(start_verb,verb_len,"THEN") ) {
8747 RExC_seen |= REG_SEEN_CUTGROUP;
8753 vFAIL3("Unknown verb pattern '%.*s'",
8754 verb_len, start_verb);
8757 if ( start_arg && internal_argval ) {
8758 vFAIL3("Verb pattern '%.*s' may not have an argument",
8759 verb_len, start_verb);
8760 } else if ( argok < 0 && !start_arg ) {
8761 vFAIL3("Verb pattern '%.*s' has a mandatory argument",
8762 verb_len, start_verb);
8764 ret = reganode(pRExC_state, op, internal_argval);
8765 if ( ! internal_argval && ! SIZE_ONLY ) {
8767 SV *sv = newSVpvn( start_arg, RExC_parse - start_arg);
8768 ARG(ret) = add_data( pRExC_state, 1, "S" );
8769 RExC_rxi->data->data[ARG(ret)]=(void*)sv;
8776 if (!internal_argval)
8777 RExC_seen |= REG_SEEN_VERBARG;
8778 } else if ( start_arg ) {
8779 vFAIL3("Verb pattern '%.*s' may not have an argument",
8780 verb_len, start_verb);
8782 ret = reg_node(pRExC_state, op);
8784 nextchar(pRExC_state);
8787 else if (*RExC_parse == '?') { /* (?...) */
8788 bool is_logical = 0;
8789 const char * const seqstart = RExC_parse;
8790 if (has_intervening_patws && SIZE_ONLY) {
8791 ckWARNregdep(RExC_parse + 1, "In '(?...)', splitting the initial '(?' is deprecated");
8795 paren = *RExC_parse++;
8796 ret = NULL; /* For look-ahead/behind. */
8799 case 'P': /* (?P...) variants for those used to PCRE/Python */
8800 paren = *RExC_parse++;
8801 if ( paren == '<') /* (?P<...>) named capture */
8803 else if (paren == '>') { /* (?P>name) named recursion */
8804 goto named_recursion;
8806 else if (paren == '=') { /* (?P=...) named backref */
8807 /* this pretty much dupes the code for \k<NAME> in regatom(), if
8808 you change this make sure you change that */
8809 char* name_start = RExC_parse;
8811 SV *sv_dat = reg_scan_name(pRExC_state,
8812 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
8813 if (RExC_parse == name_start || *RExC_parse != ')')
8814 vFAIL2("Sequence %.3s... not terminated",parse_start);
8817 num = add_data( pRExC_state, 1, "S" );
8818 RExC_rxi->data->data[num]=(void*)sv_dat;
8819 SvREFCNT_inc_simple_void(sv_dat);
8822 ret = reganode(pRExC_state,
8825 : (ASCII_FOLD_RESTRICTED)
8827 : (AT_LEAST_UNI_SEMANTICS)
8835 Set_Node_Offset(ret, parse_start+1);
8836 Set_Node_Cur_Length(ret, parse_start);
8838 nextchar(pRExC_state);
8842 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
8844 case '<': /* (?<...) */
8845 if (*RExC_parse == '!')
8847 else if (*RExC_parse != '=')
8853 case '\'': /* (?'...') */
8854 name_start= RExC_parse;
8855 svname = reg_scan_name(pRExC_state,
8856 SIZE_ONLY ? /* reverse test from the others */
8857 REG_RSN_RETURN_NAME :
8858 REG_RSN_RETURN_NULL);
8859 if (RExC_parse == name_start) {
8861 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
8864 if (*RExC_parse != paren)
8865 vFAIL2("Sequence (?%c... not terminated",
8866 paren=='>' ? '<' : paren);
8870 if (!svname) /* shouldn't happen */
8872 "panic: reg_scan_name returned NULL");
8873 if (!RExC_paren_names) {
8874 RExC_paren_names= newHV();
8875 sv_2mortal(MUTABLE_SV(RExC_paren_names));
8877 RExC_paren_name_list= newAV();
8878 sv_2mortal(MUTABLE_SV(RExC_paren_name_list));
8881 he_str = hv_fetch_ent( RExC_paren_names, svname, 1, 0 );
8883 sv_dat = HeVAL(he_str);
8885 /* croak baby croak */
8887 "panic: paren_name hash element allocation failed");
8888 } else if ( SvPOK(sv_dat) ) {
8889 /* (?|...) can mean we have dupes so scan to check
8890 its already been stored. Maybe a flag indicating
8891 we are inside such a construct would be useful,
8892 but the arrays are likely to be quite small, so
8893 for now we punt -- dmq */
8894 IV count = SvIV(sv_dat);
8895 I32 *pv = (I32*)SvPVX(sv_dat);
8897 for ( i = 0 ; i < count ; i++ ) {
8898 if ( pv[i] == RExC_npar ) {
8904 pv = (I32*)SvGROW(sv_dat, SvCUR(sv_dat) + sizeof(I32)+1);
8905 SvCUR_set(sv_dat, SvCUR(sv_dat) + sizeof(I32));
8906 pv[count] = RExC_npar;
8907 SvIV_set(sv_dat, SvIVX(sv_dat) + 1);
8910 (void)SvUPGRADE(sv_dat,SVt_PVNV);
8911 sv_setpvn(sv_dat, (char *)&(RExC_npar), sizeof(I32));
8913 SvIV_set(sv_dat, 1);
8916 /* Yes this does cause a memory leak in debugging Perls */
8917 if (!av_store(RExC_paren_name_list, RExC_npar, SvREFCNT_inc(svname)))
8918 SvREFCNT_dec_NN(svname);
8921 /*sv_dump(sv_dat);*/
8923 nextchar(pRExC_state);
8925 goto capturing_parens;
8927 RExC_seen |= REG_SEEN_LOOKBEHIND;
8928 RExC_in_lookbehind++;
8930 case '=': /* (?=...) */
8931 RExC_seen_zerolen++;
8933 case '!': /* (?!...) */
8934 RExC_seen_zerolen++;
8935 if (*RExC_parse == ')') {
8936 ret=reg_node(pRExC_state, OPFAIL);
8937 nextchar(pRExC_state);
8941 case '|': /* (?|...) */
8942 /* branch reset, behave like a (?:...) except that
8943 buffers in alternations share the same numbers */
8945 after_freeze = freeze_paren = RExC_npar;
8947 case ':': /* (?:...) */
8948 case '>': /* (?>...) */
8950 case '$': /* (?$...) */
8951 case '@': /* (?@...) */
8952 vFAIL2("Sequence (?%c...) not implemented", (int)paren);
8954 case '#': /* (?#...) */
8955 /* XXX As soon as we disallow separating the '?' and '*' (by
8956 * spaces or (?#...) comment), it is believed that this case
8957 * will be unreachable and can be removed. See
8959 while (*RExC_parse && *RExC_parse != ')')
8961 if (*RExC_parse != ')')
8962 FAIL("Sequence (?#... not terminated");
8963 nextchar(pRExC_state);
8966 case '0' : /* (?0) */
8967 case 'R' : /* (?R) */
8968 if (*RExC_parse != ')')
8969 FAIL("Sequence (?R) not terminated");
8970 ret = reg_node(pRExC_state, GOSTART);
8971 *flagp |= POSTPONED;
8972 nextchar(pRExC_state);
8975 { /* named and numeric backreferences */
8977 case '&': /* (?&NAME) */
8978 parse_start = RExC_parse - 1;
8981 SV *sv_dat = reg_scan_name(pRExC_state,
8982 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
8983 num = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0;
8985 goto gen_recurse_regop;
8986 assert(0); /* NOT REACHED */
8988 if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) {
8990 vFAIL("Illegal pattern");
8992 goto parse_recursion;
8994 case '-': /* (?-1) */
8995 if (!(RExC_parse[0] >= '1' && RExC_parse[0] <= '9')) {
8996 RExC_parse--; /* rewind to let it be handled later */
9000 case '1': case '2': case '3': case '4': /* (?1) */
9001 case '5': case '6': case '7': case '8': case '9':
9004 num = atoi(RExC_parse);
9005 parse_start = RExC_parse - 1; /* MJD */
9006 if (*RExC_parse == '-')
9008 while (isDIGIT(*RExC_parse))
9010 if (*RExC_parse!=')')
9011 vFAIL("Expecting close bracket");
9014 if ( paren == '-' ) {
9016 Diagram of capture buffer numbering.
9017 Top line is the normal capture buffer numbers
9018 Bottom line is the negative indexing as from
9022 /(a(x)y)(a(b(c(?-2)d)e)f)(g(h))/
9026 num = RExC_npar + num;
9029 vFAIL("Reference to nonexistent group");
9031 } else if ( paren == '+' ) {
9032 num = RExC_npar + num - 1;
9035 ret = reganode(pRExC_state, GOSUB, num);
9037 if (num > (I32)RExC_rx->nparens) {
9039 vFAIL("Reference to nonexistent group");
9041 ARG2L_SET( ret, RExC_recurse_count++);
9043 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
9044 "Recurse #%"UVuf" to %"IVdf"\n", (UV)ARG(ret), (IV)ARG2L(ret)));
9048 RExC_seen |= REG_SEEN_RECURSE;
9049 Set_Node_Length(ret, 1 + regarglen[OP(ret)]); /* MJD */
9050 Set_Node_Offset(ret, parse_start); /* MJD */
9052 *flagp |= POSTPONED;
9053 nextchar(pRExC_state);
9055 } /* named and numeric backreferences */
9056 assert(0); /* NOT REACHED */
9058 case '?': /* (??...) */
9060 if (*RExC_parse != '{') {
9062 vFAIL3("Sequence (%.*s...) not recognized", RExC_parse-seqstart, seqstart);
9065 *flagp |= POSTPONED;
9066 paren = *RExC_parse++;
9068 case '{': /* (?{...}) */
9071 struct reg_code_block *cb;
9073 RExC_seen_zerolen++;
9075 if ( !pRExC_state->num_code_blocks
9076 || pRExC_state->code_index >= pRExC_state->num_code_blocks
9077 || pRExC_state->code_blocks[pRExC_state->code_index].start
9078 != (STRLEN)((RExC_parse -3 - (is_logical ? 1 : 0))
9081 if (RExC_pm_flags & PMf_USE_RE_EVAL)
9082 FAIL("panic: Sequence (?{...}): no code block found\n");
9083 FAIL("Eval-group not allowed at runtime, use re 'eval'");
9085 /* this is a pre-compiled code block (?{...}) */
9086 cb = &pRExC_state->code_blocks[pRExC_state->code_index];
9087 RExC_parse = RExC_start + cb->end;
9090 if (cb->src_regex) {
9091 n = add_data(pRExC_state, 2, "rl");
9092 RExC_rxi->data->data[n] =
9093 (void*)SvREFCNT_inc((SV*)cb->src_regex);
9094 RExC_rxi->data->data[n+1] = (void*)o;
9097 n = add_data(pRExC_state, 1,
9098 (RExC_pm_flags & PMf_HAS_CV) ? "L" : "l");
9099 RExC_rxi->data->data[n] = (void*)o;
9102 pRExC_state->code_index++;
9103 nextchar(pRExC_state);
9107 ret = reg_node(pRExC_state, LOGICAL);
9108 eval = reganode(pRExC_state, EVAL, n);
9111 /* for later propagation into (??{}) return value */
9112 eval->flags = (U8) (RExC_flags & RXf_PMf_COMPILETIME);
9114 REGTAIL(pRExC_state, ret, eval);
9115 /* deal with the length of this later - MJD */
9118 ret = reganode(pRExC_state, EVAL, n);
9119 Set_Node_Length(ret, RExC_parse - parse_start + 1);
9120 Set_Node_Offset(ret, parse_start);
9123 case '(': /* (?(?{...})...) and (?(?=...)...) */
9126 if (RExC_parse[0] == '?') { /* (?(?...)) */
9127 if (RExC_parse[1] == '=' || RExC_parse[1] == '!'
9128 || RExC_parse[1] == '<'
9129 || RExC_parse[1] == '{') { /* Lookahead or eval. */
9133 ret = reg_node(pRExC_state, LOGICAL);
9137 tail = reg(pRExC_state, 1, &flag, depth+1);
9138 if (flag & RESTART_UTF8) {
9139 *flagp = RESTART_UTF8;
9142 REGTAIL(pRExC_state, ret, tail);
9146 else if ( RExC_parse[0] == '<' /* (?(<NAME>)...) */
9147 || RExC_parse[0] == '\'' ) /* (?('NAME')...) */
9149 char ch = RExC_parse[0] == '<' ? '>' : '\'';
9150 char *name_start= RExC_parse++;
9152 SV *sv_dat=reg_scan_name(pRExC_state,
9153 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
9154 if (RExC_parse == name_start || *RExC_parse != ch)
9155 vFAIL2("Sequence (?(%c... not terminated",
9156 (ch == '>' ? '<' : ch));
9159 num = add_data( pRExC_state, 1, "S" );
9160 RExC_rxi->data->data[num]=(void*)sv_dat;
9161 SvREFCNT_inc_simple_void(sv_dat);
9163 ret = reganode(pRExC_state,NGROUPP,num);
9164 goto insert_if_check_paren;
9166 else if (RExC_parse[0] == 'D' &&
9167 RExC_parse[1] == 'E' &&
9168 RExC_parse[2] == 'F' &&
9169 RExC_parse[3] == 'I' &&
9170 RExC_parse[4] == 'N' &&
9171 RExC_parse[5] == 'E')
9173 ret = reganode(pRExC_state,DEFINEP,0);
9176 goto insert_if_check_paren;
9178 else if (RExC_parse[0] == 'R') {
9181 if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) {
9182 parno = atoi(RExC_parse++);
9183 while (isDIGIT(*RExC_parse))
9185 } else if (RExC_parse[0] == '&') {
9188 sv_dat = reg_scan_name(pRExC_state,
9189 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
9190 parno = sv_dat ? *((I32 *)SvPVX(sv_dat)) : 0;
9192 ret = reganode(pRExC_state,INSUBP,parno);
9193 goto insert_if_check_paren;
9195 else if (RExC_parse[0] >= '1' && RExC_parse[0] <= '9' ) {
9198 parno = atoi(RExC_parse++);
9200 while (isDIGIT(*RExC_parse))
9202 ret = reganode(pRExC_state, GROUPP, parno);
9204 insert_if_check_paren:
9205 if ((c = *nextchar(pRExC_state)) != ')')
9206 vFAIL("Switch condition not recognized");
9208 REGTAIL(pRExC_state, ret, reganode(pRExC_state, IFTHEN, 0));
9209 br = regbranch(pRExC_state, &flags, 1,depth+1);
9211 if (flags & RESTART_UTF8) {
9212 *flagp = RESTART_UTF8;
9215 FAIL2("panic: regbranch returned NULL, flags=%#"UVxf"",
9218 REGTAIL(pRExC_state, br, reganode(pRExC_state, LONGJMP, 0));
9219 c = *nextchar(pRExC_state);
9224 vFAIL("(?(DEFINE)....) does not allow branches");
9225 lastbr = reganode(pRExC_state, IFTHEN, 0); /* Fake one for optimizer. */
9226 if (!regbranch(pRExC_state, &flags, 1,depth+1)) {
9227 if (flags & RESTART_UTF8) {
9228 *flagp = RESTART_UTF8;
9231 FAIL2("panic: regbranch returned NULL, flags=%#"UVxf"",
9234 REGTAIL(pRExC_state, ret, lastbr);
9237 c = *nextchar(pRExC_state);
9242 vFAIL("Switch (?(condition)... contains too many branches");
9243 ender = reg_node(pRExC_state, TAIL);
9244 REGTAIL(pRExC_state, br, ender);
9246 REGTAIL(pRExC_state, lastbr, ender);
9247 REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender);
9250 REGTAIL(pRExC_state, ret, ender);
9251 RExC_size++; /* XXX WHY do we need this?!!
9252 For large programs it seems to be required
9253 but I can't figure out why. -- dmq*/
9257 vFAIL2("Unknown switch condition (?(%.2s", RExC_parse);
9260 case '[': /* (?[ ... ]) */
9261 return handle_regex_sets(pRExC_state, NULL, flagp, depth,
9264 RExC_parse--; /* for vFAIL to print correctly */
9265 vFAIL("Sequence (? incomplete");
9267 default: /* e.g., (?i) */
9270 parse_lparen_question_flags(pRExC_state);
9271 if (UCHARAT(RExC_parse) != ':') {
9272 nextchar(pRExC_state);
9277 nextchar(pRExC_state);
9287 ret = reganode(pRExC_state, OPEN, parno);
9290 RExC_nestroot = parno;
9291 if (RExC_seen & REG_SEEN_RECURSE
9292 && !RExC_open_parens[parno-1])
9294 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
9295 "Setting open paren #%"IVdf" to %d\n",
9296 (IV)parno, REG_NODE_NUM(ret)));
9297 RExC_open_parens[parno-1]= ret;
9300 Set_Node_Length(ret, 1); /* MJD */
9301 Set_Node_Offset(ret, RExC_parse); /* MJD */
9309 /* Pick up the branches, linking them together. */
9310 parse_start = RExC_parse; /* MJD */
9311 br = regbranch(pRExC_state, &flags, 1,depth+1);
9313 /* branch_len = (paren != 0); */
9316 if (flags & RESTART_UTF8) {
9317 *flagp = RESTART_UTF8;
9320 FAIL2("panic: regbranch returned NULL, flags=%#"UVxf"", (UV) flags);
9322 if (*RExC_parse == '|') {
9323 if (!SIZE_ONLY && RExC_extralen) {
9324 reginsert(pRExC_state, BRANCHJ, br, depth+1);
9327 reginsert(pRExC_state, BRANCH, br, depth+1);
9328 Set_Node_Length(br, paren != 0);
9329 Set_Node_Offset_To_R(br-RExC_emit_start, parse_start-RExC_start);
9333 RExC_extralen += 1; /* For BRANCHJ-BRANCH. */
9335 else if (paren == ':') {
9336 *flagp |= flags&SIMPLE;
9338 if (is_open) { /* Starts with OPEN. */
9339 REGTAIL(pRExC_state, ret, br); /* OPEN -> first. */
9341 else if (paren != '?') /* Not Conditional */
9343 *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED);
9345 while (*RExC_parse == '|') {
9346 if (!SIZE_ONLY && RExC_extralen) {
9347 ender = reganode(pRExC_state, LONGJMP,0);
9348 REGTAIL(pRExC_state, NEXTOPER(NEXTOPER(lastbr)), ender); /* Append to the previous. */
9351 RExC_extralen += 2; /* Account for LONGJMP. */
9352 nextchar(pRExC_state);
9354 if (RExC_npar > after_freeze)
9355 after_freeze = RExC_npar;
9356 RExC_npar = freeze_paren;
9358 br = regbranch(pRExC_state, &flags, 0, depth+1);
9361 if (flags & RESTART_UTF8) {
9362 *flagp = RESTART_UTF8;
9365 FAIL2("panic: regbranch returned NULL, flags=%#"UVxf"", (UV) flags);
9367 REGTAIL(pRExC_state, lastbr, br); /* BRANCH -> BRANCH. */
9369 *flagp |= flags & (SPSTART | HASWIDTH | POSTPONED);
9372 if (have_branch || paren != ':') {
9373 /* Make a closing node, and hook it on the end. */
9376 ender = reg_node(pRExC_state, TAIL);
9379 ender = reganode(pRExC_state, CLOSE, parno);
9380 if (!SIZE_ONLY && RExC_seen & REG_SEEN_RECURSE) {
9381 DEBUG_OPTIMISE_MORE_r(PerlIO_printf(Perl_debug_log,
9382 "Setting close paren #%"IVdf" to %d\n",
9383 (IV)parno, REG_NODE_NUM(ender)));
9384 RExC_close_parens[parno-1]= ender;
9385 if (RExC_nestroot == parno)
9388 Set_Node_Offset(ender,RExC_parse+1); /* MJD */
9389 Set_Node_Length(ender,1); /* MJD */
9395 *flagp &= ~HASWIDTH;
9398 ender = reg_node(pRExC_state, SUCCEED);
9401 ender = reg_node(pRExC_state, END);
9403 assert(!RExC_opend); /* there can only be one! */
9408 DEBUG_PARSE_r(if (!SIZE_ONLY) {
9409 SV * const mysv_val1=sv_newmortal();
9410 SV * const mysv_val2=sv_newmortal();
9411 DEBUG_PARSE_MSG("lsbr");
9412 regprop(RExC_rx, mysv_val1, lastbr);
9413 regprop(RExC_rx, mysv_val2, ender);
9414 PerlIO_printf(Perl_debug_log, "~ tying lastbr %s (%"IVdf") to ender %s (%"IVdf") offset %"IVdf"\n",
9415 SvPV_nolen_const(mysv_val1),
9416 (IV)REG_NODE_NUM(lastbr),
9417 SvPV_nolen_const(mysv_val2),
9418 (IV)REG_NODE_NUM(ender),
9419 (IV)(ender - lastbr)
9422 REGTAIL(pRExC_state, lastbr, ender);
9424 if (have_branch && !SIZE_ONLY) {
9427 RExC_seen |= REG_TOP_LEVEL_BRANCHES;
9429 /* Hook the tails of the branches to the closing node. */
9430 for (br = ret; br; br = regnext(br)) {
9431 const U8 op = PL_regkind[OP(br)];
9433 REGTAIL_STUDY(pRExC_state, NEXTOPER(br), ender);
9434 if (OP(NEXTOPER(br)) != NOTHING || regnext(NEXTOPER(br)) != ender)
9437 else if (op == BRANCHJ) {
9438 REGTAIL_STUDY(pRExC_state, NEXTOPER(NEXTOPER(br)), ender);
9439 /* for now we always disable this optimisation * /
9440 if (OP(NEXTOPER(NEXTOPER(br))) != NOTHING || regnext(NEXTOPER(NEXTOPER(br))) != ender)
9446 br= PL_regkind[OP(ret)] != BRANCH ? regnext(ret) : ret;
9447 DEBUG_PARSE_r(if (!SIZE_ONLY) {
9448 SV * const mysv_val1=sv_newmortal();
9449 SV * const mysv_val2=sv_newmortal();
9450 DEBUG_PARSE_MSG("NADA");
9451 regprop(RExC_rx, mysv_val1, ret);
9452 regprop(RExC_rx, mysv_val2, ender);
9453 PerlIO_printf(Perl_debug_log, "~ converting ret %s (%"IVdf") to ender %s (%"IVdf") offset %"IVdf"\n",
9454 SvPV_nolen_const(mysv_val1),
9455 (IV)REG_NODE_NUM(ret),
9456 SvPV_nolen_const(mysv_val2),
9457 (IV)REG_NODE_NUM(ender),
9462 if (OP(ender) == TAIL) {
9467 for ( opt= br + 1; opt < ender ; opt++ )
9469 NEXT_OFF(br)= ender - br;
9477 static const char parens[] = "=!<,>";
9479 if (paren && (p = strchr(parens, paren))) {
9480 U8 node = ((p - parens) % 2) ? UNLESSM : IFMATCH;
9481 int flag = (p - parens) > 1;
9484 node = SUSPEND, flag = 0;
9485 reginsert(pRExC_state, node,ret, depth+1);
9486 Set_Node_Cur_Length(ret, parse_start);
9487 Set_Node_Offset(ret, parse_start + 1);
9489 REGTAIL_STUDY(pRExC_state, ret, reg_node(pRExC_state, TAIL));
9493 /* Check for proper termination. */
9495 /* restore original flags, but keep (?p) */
9496 RExC_flags = oregflags | (RExC_flags & RXf_PMf_KEEPCOPY);
9497 if (RExC_parse >= RExC_end || *nextchar(pRExC_state) != ')') {
9498 RExC_parse = oregcomp_parse;
9499 vFAIL("Unmatched (");
9502 else if (!paren && RExC_parse < RExC_end) {
9503 if (*RExC_parse == ')') {
9505 vFAIL("Unmatched )");
9508 FAIL("Junk on end of regexp"); /* "Can't happen". */
9509 assert(0); /* NOTREACHED */
9512 if (RExC_in_lookbehind) {
9513 RExC_in_lookbehind--;
9515 if (after_freeze > RExC_npar)
9516 RExC_npar = after_freeze;
9521 - regbranch - one alternative of an | operator
9523 * Implements the concatenation operator.
9525 * Returns NULL, setting *flagp to RESTART_UTF8 if the sizing scan needs to be
9529 S_regbranch(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, I32 first, U32 depth)
9533 regnode *chain = NULL;
9535 I32 flags = 0, c = 0;
9536 GET_RE_DEBUG_FLAGS_DECL;
9538 PERL_ARGS_ASSERT_REGBRANCH;
9540 DEBUG_PARSE("brnc");
9545 if (!SIZE_ONLY && RExC_extralen)
9546 ret = reganode(pRExC_state, BRANCHJ,0);
9548 ret = reg_node(pRExC_state, BRANCH);
9549 Set_Node_Length(ret, 1);
9553 if (!first && SIZE_ONLY)
9554 RExC_extralen += 1; /* BRANCHJ */
9556 *flagp = WORST; /* Tentatively. */
9559 nextchar(pRExC_state);
9560 while (RExC_parse < RExC_end && *RExC_parse != '|' && *RExC_parse != ')') {
9562 latest = regpiece(pRExC_state, &flags,depth+1);
9563 if (latest == NULL) {
9564 if (flags & TRYAGAIN)
9566 if (flags & RESTART_UTF8) {
9567 *flagp = RESTART_UTF8;
9570 FAIL2("panic: regpiece returned NULL, flags=%#"UVxf"", (UV) flags);
9572 else if (ret == NULL)
9574 *flagp |= flags&(HASWIDTH|POSTPONED);
9575 if (chain == NULL) /* First piece. */
9576 *flagp |= flags&SPSTART;
9579 REGTAIL(pRExC_state, chain, latest);
9584 if (chain == NULL) { /* Loop ran zero times. */
9585 chain = reg_node(pRExC_state, NOTHING);
9590 *flagp |= flags&SIMPLE;
9597 - regpiece - something followed by possible [*+?]
9599 * Note that the branching code sequences used for ? and the general cases
9600 * of * and + are somewhat optimized: they use the same NOTHING node as
9601 * both the endmarker for their branch list and the body of the last branch.
9602 * It might seem that this node could be dispensed with entirely, but the
9603 * endmarker role is not redundant.
9605 * Returns NULL, setting *flagp to TRYAGAIN if regatom() returns NULL with
9607 * Returns NULL, setting *flagp to RESTART_UTF8 if the sizing scan needs to be
9611 S_regpiece(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth)
9618 const char * const origparse = RExC_parse;
9620 I32 max = REG_INFTY;
9621 #ifdef RE_TRACK_PATTERN_OFFSETS
9624 const char *maxpos = NULL;
9626 /* Save the original in case we change the emitted regop to a FAIL. */
9627 regnode * const orig_emit = RExC_emit;
9629 GET_RE_DEBUG_FLAGS_DECL;
9631 PERL_ARGS_ASSERT_REGPIECE;
9633 DEBUG_PARSE("piec");
9635 ret = regatom(pRExC_state, &flags,depth+1);
9637 if (flags & (TRYAGAIN|RESTART_UTF8))
9638 *flagp |= flags & (TRYAGAIN|RESTART_UTF8);
9640 FAIL2("panic: regatom returned NULL, flags=%#"UVxf"", (UV) flags);
9646 if (op == '{' && regcurly(RExC_parse, FALSE)) {
9648 #ifdef RE_TRACK_PATTERN_OFFSETS
9649 parse_start = RExC_parse; /* MJD */
9651 next = RExC_parse + 1;
9652 while (isDIGIT(*next) || *next == ',') {
9661 if (*next == '}') { /* got one */
9665 min = atoi(RExC_parse);
9669 maxpos = RExC_parse;
9671 if (!max && *maxpos != '0')
9672 max = REG_INFTY; /* meaning "infinity" */
9673 else if (max >= REG_INFTY)
9674 vFAIL2("Quantifier in {,} bigger than %d", REG_INFTY - 1);
9676 nextchar(pRExC_state);
9677 if (max < min) { /* If can't match, warn and optimize to fail
9680 ckWARNreg(RExC_parse, "Quantifier {n,m} with n > m can't match");
9682 /* We can't back off the size because we have to reserve
9683 * enough space for all the things we are about to throw
9684 * away, but we can shrink it by the ammount we are about
9686 RExC_size = PREVOPER(RExC_size) - regarglen[(U8)OPFAIL];
9689 RExC_emit = orig_emit;
9691 ret = reg_node(pRExC_state, OPFAIL);
9694 else if (max == 0) { /* replace {0} with a nothing node */
9696 RExC_size = PREVOPER(RExC_size) - regarglen[(U8)NOTHING];
9699 RExC_emit = orig_emit;
9701 ret = reg_node(pRExC_state, NOTHING);
9703 /* But the quantifier includes any '?', the non-greedy
9704 * modifier, after the {}, [perl #118375]
9705 * Likewise the '+', the possessive modifier. They are mutually exclusive.
9707 if (RExC_parse < RExC_end && (*RExC_parse == '?' || *RExC_parse == '+') ) {
9708 nextchar(pRExC_state);
9714 if ((flags&SIMPLE)) {
9715 RExC_naughty += 2 + RExC_naughty / 2;
9716 reginsert(pRExC_state, CURLY, ret, depth+1);
9717 Set_Node_Offset(ret, parse_start+1); /* MJD */
9718 Set_Node_Cur_Length(ret, parse_start);
9721 regnode * const w = reg_node(pRExC_state, WHILEM);
9724 REGTAIL(pRExC_state, ret, w);
9725 if (!SIZE_ONLY && RExC_extralen) {
9726 reginsert(pRExC_state, LONGJMP,ret, depth+1);
9727 reginsert(pRExC_state, NOTHING,ret, depth+1);
9728 NEXT_OFF(ret) = 3; /* Go over LONGJMP. */
9730 reginsert(pRExC_state, CURLYX,ret, depth+1);
9732 Set_Node_Offset(ret, parse_start+1);
9733 Set_Node_Length(ret,
9734 op == '{' ? (RExC_parse - parse_start) : 1);
9736 if (!SIZE_ONLY && RExC_extralen)
9737 NEXT_OFF(ret) = 3; /* Go over NOTHING to LONGJMP. */
9738 REGTAIL(pRExC_state, ret, reg_node(pRExC_state, NOTHING));
9740 RExC_whilem_seen++, RExC_extralen += 3;
9741 RExC_naughty += 4 + RExC_naughty; /* compound interest */
9750 ARG1_SET(ret, (U16)min);
9751 ARG2_SET(ret, (U16)max);
9763 #if 0 /* Now runtime fix should be reliable. */
9765 /* if this is reinstated, don't forget to put this back into perldiag:
9767 =item Regexp *+ operand could be empty at {#} in regex m/%s/
9769 (F) The part of the regexp subject to either the * or + quantifier
9770 could match an empty string. The {#} shows in the regular
9771 expression about where the problem was discovered.
9775 if (!(flags&HASWIDTH) && op != '?')
9776 vFAIL("Regexp *+ operand could be empty");
9779 #ifdef RE_TRACK_PATTERN_OFFSETS
9780 parse_start = RExC_parse;
9782 nextchar(pRExC_state);
9784 *flagp = (op != '+') ? (WORST|SPSTART|HASWIDTH) : (WORST|HASWIDTH);
9786 if (op == '*' && (flags&SIMPLE)) {
9787 reginsert(pRExC_state, STAR, ret, depth+1);
9791 else if (op == '*') {
9795 else if (op == '+' && (flags&SIMPLE)) {
9796 reginsert(pRExC_state, PLUS, ret, depth+1);
9800 else if (op == '+') {
9804 else if (op == '?') {
9809 if (!SIZE_ONLY && !(flags&(HASWIDTH|POSTPONED)) && max > REG_INFTY/3) {
9810 SAVEFREESV(RExC_rx_sv); /* in case of fatal warnings */
9811 ckWARN3reg(RExC_parse,
9812 "%.*s matches null string many times",
9813 (int)(RExC_parse >= origparse ? RExC_parse - origparse : 0),
9815 (void)ReREFCNT_inc(RExC_rx_sv);
9818 if (RExC_parse < RExC_end && *RExC_parse == '?') {
9819 nextchar(pRExC_state);
9820 reginsert(pRExC_state, MINMOD, ret, depth+1);
9821 REGTAIL(pRExC_state, ret, ret + NODE_STEP_REGNODE);
9824 if (RExC_parse < RExC_end && *RExC_parse == '+') {
9826 nextchar(pRExC_state);
9827 ender = reg_node(pRExC_state, SUCCEED);
9828 REGTAIL(pRExC_state, ret, ender);
9829 reginsert(pRExC_state, SUSPEND, ret, depth+1);
9831 ender = reg_node(pRExC_state, TAIL);
9832 REGTAIL(pRExC_state, ret, ender);
9835 if (RExC_parse < RExC_end && ISMULT2(RExC_parse)) {
9837 vFAIL("Nested quantifiers");
9844 S_grok_bslash_N(pTHX_ RExC_state_t *pRExC_state, regnode** node_p, UV *valuep, I32 *flagp, U32 depth, bool in_char_class,
9845 const bool strict /* Apply stricter parsing rules? */
9849 /* This is expected to be called by a parser routine that has recognized '\N'
9850 and needs to handle the rest. RExC_parse is expected to point at the first
9851 char following the N at the time of the call. On successful return,
9852 RExC_parse has been updated to point to just after the sequence identified
9853 by this routine, and <*flagp> has been updated.
9855 The \N may be inside (indicated by the boolean <in_char_class>) or outside a
9858 \N may begin either a named sequence, or if outside a character class, mean
9859 to match a non-newline. For non single-quoted regexes, the tokenizer has
9860 attempted to decide which, and in the case of a named sequence, converted it
9861 into one of the forms: \N{} (if the sequence is null), or \N{U+c1.c2...},
9862 where c1... are the characters in the sequence. For single-quoted regexes,
9863 the tokenizer passes the \N sequence through unchanged; this code will not
9864 attempt to determine this nor expand those, instead raising a syntax error.
9865 The net effect is that if the beginning of the passed-in pattern isn't '{U+'
9866 or there is no '}', it signals that this \N occurrence means to match a
9869 Only the \N{U+...} form should occur in a character class, for the same
9870 reason that '.' inside a character class means to just match a period: it
9871 just doesn't make sense.
9873 The function raises an error (via vFAIL), and doesn't return for various
9874 syntax errors. Otherwise it returns TRUE and sets <node_p> or <valuep> on
9875 success; it returns FALSE otherwise. Returns FALSE, setting *flagp to
9876 RESTART_UTF8 if the sizing scan needs to be restarted. Such a restart is
9877 only possible if node_p is non-NULL.
9880 If <valuep> is non-null, it means the caller can accept an input sequence
9881 consisting of a just a single code point; <*valuep> is set to that value
9882 if the input is such.
9884 If <node_p> is non-null it signifies that the caller can accept any other
9885 legal sequence (i.e., one that isn't just a single code point). <*node_p>
9887 1) \N means not-a-NL: points to a newly created REG_ANY node;
9888 2) \N{}: points to a new NOTHING node;
9889 3) otherwise: points to a new EXACT node containing the resolved
9891 Note that FALSE is returned for single code point sequences if <valuep> is
9895 char * endbrace; /* '}' following the name */
9897 char *endchar; /* Points to '.' or '}' ending cur char in the input
9899 bool has_multiple_chars; /* true if the input stream contains a sequence of
9900 more than one character */
9902 GET_RE_DEBUG_FLAGS_DECL;
9904 PERL_ARGS_ASSERT_GROK_BSLASH_N;
9908 assert(cBOOL(node_p) ^ cBOOL(valuep)); /* Exactly one should be set */
9910 /* The [^\n] meaning of \N ignores spaces and comments under the /x
9911 * modifier. The other meaning does not */
9912 p = (RExC_flags & RXf_PMf_EXTENDED)
9913 ? regwhite( pRExC_state, RExC_parse )
9916 /* Disambiguate between \N meaning a named character versus \N meaning
9917 * [^\n]. The former is assumed when it can't be the latter. */
9918 if (*p != '{' || regcurly(p, FALSE)) {
9921 /* no bare \N in a charclass */
9922 if (in_char_class) {
9923 vFAIL("\\N in a character class must be a named character: \\N{...}");
9927 nextchar(pRExC_state);
9928 *node_p = reg_node(pRExC_state, REG_ANY);
9929 *flagp |= HASWIDTH|SIMPLE;
9932 Set_Node_Length(*node_p, 1); /* MJD */
9936 /* Here, we have decided it should be a named character or sequence */
9938 /* The test above made sure that the next real character is a '{', but
9939 * under the /x modifier, it could be separated by space (or a comment and
9940 * \n) and this is not allowed (for consistency with \x{...} and the
9941 * tokenizer handling of \N{NAME}). */
9942 if (*RExC_parse != '{') {
9943 vFAIL("Missing braces on \\N{}");
9946 RExC_parse++; /* Skip past the '{' */
9948 if (! (endbrace = strchr(RExC_parse, '}')) /* no trailing brace */
9949 || ! (endbrace == RExC_parse /* nothing between the {} */
9950 || (endbrace - RExC_parse >= 2 /* U+ (bad hex is checked below */
9951 && strnEQ(RExC_parse, "U+", 2)))) /* for a better error msg) */
9953 if (endbrace) RExC_parse = endbrace; /* position msg's '<--HERE' */
9954 vFAIL("\\N{NAME} must be resolved by the lexer");
9957 if (endbrace == RExC_parse) { /* empty: \N{} */
9960 *node_p = reg_node(pRExC_state,NOTHING);
9962 else if (in_char_class) {
9963 if (SIZE_ONLY && in_char_class) {
9965 RExC_parse++; /* Position after the "}" */
9966 vFAIL("Zero length \\N{}");
9969 ckWARNreg(RExC_parse,
9970 "Ignoring zero length \\N{} in character class");
9978 nextchar(pRExC_state);
9982 RExC_uni_semantics = 1; /* Unicode named chars imply Unicode semantics */
9983 RExC_parse += 2; /* Skip past the 'U+' */
9985 endchar = RExC_parse + strcspn(RExC_parse, ".}");
9987 /* Code points are separated by dots. If none, there is only one code
9988 * point, and is terminated by the brace */
9989 has_multiple_chars = (endchar < endbrace);
9991 if (valuep && (! has_multiple_chars || in_char_class)) {
9992 /* We only pay attention to the first char of
9993 multichar strings being returned in char classes. I kinda wonder
9994 if this makes sense as it does change the behaviour
9995 from earlier versions, OTOH that behaviour was broken
9996 as well. XXX Solution is to recharacterize as
9997 [rest-of-class]|multi1|multi2... */
9999 STRLEN length_of_hex = (STRLEN)(endchar - RExC_parse);
10000 I32 grok_hex_flags = PERL_SCAN_ALLOW_UNDERSCORES
10001 | PERL_SCAN_DISALLOW_PREFIX
10002 | (SIZE_ONLY ? PERL_SCAN_SILENT_ILLDIGIT : 0);
10004 *valuep = grok_hex(RExC_parse, &length_of_hex, &grok_hex_flags, NULL);
10006 /* The tokenizer should have guaranteed validity, but it's possible to
10007 * bypass it by using single quoting, so check */
10008 if (length_of_hex == 0
10009 || length_of_hex != (STRLEN)(endchar - RExC_parse) )
10011 RExC_parse += length_of_hex; /* Includes all the valid */
10012 RExC_parse += (RExC_orig_utf8) /* point to after 1st invalid */
10013 ? UTF8SKIP(RExC_parse)
10015 /* Guard against malformed utf8 */
10016 if (RExC_parse >= endchar) {
10017 RExC_parse = endchar;
10019 vFAIL("Invalid hexadecimal number in \\N{U+...}");
10022 if (in_char_class && has_multiple_chars) {
10024 RExC_parse = endbrace;
10025 vFAIL("\\N{} in character class restricted to one character");
10028 ckWARNreg(endchar, "Using just the first character returned by \\N{} in character class");
10032 RExC_parse = endbrace + 1;
10034 else if (! node_p || ! has_multiple_chars) {
10036 /* Here, the input is legal, but not according to the caller's
10037 * options. We fail without advancing the parse, so that the
10038 * caller can try again */
10044 /* What is done here is to convert this to a sub-pattern of the form
10045 * (?:\x{char1}\x{char2}...)
10046 * and then call reg recursively. That way, it retains its atomicness,
10047 * while not having to worry about special handling that some code
10048 * points may have. toke.c has converted the original Unicode values
10049 * to native, so that we can just pass on the hex values unchanged. We
10050 * do have to set a flag to keep recoding from happening in the
10053 SV * substitute_parse = newSVpvn_flags("?:", 2, SVf_UTF8|SVs_TEMP);
10055 char *orig_end = RExC_end;
10058 while (RExC_parse < endbrace) {
10060 /* Convert to notation the rest of the code understands */
10061 sv_catpv(substitute_parse, "\\x{");
10062 sv_catpvn(substitute_parse, RExC_parse, endchar - RExC_parse);
10063 sv_catpv(substitute_parse, "}");
10065 /* Point to the beginning of the next character in the sequence. */
10066 RExC_parse = endchar + 1;
10067 endchar = RExC_parse + strcspn(RExC_parse, ".}");
10069 sv_catpv(substitute_parse, ")");
10071 RExC_parse = SvPV(substitute_parse, len);
10073 /* Don't allow empty number */
10075 vFAIL("Invalid hexadecimal number in \\N{U+...}");
10077 RExC_end = RExC_parse + len;
10079 /* The values are Unicode, and therefore not subject to recoding */
10080 RExC_override_recoding = 1;
10082 if (!(*node_p = reg(pRExC_state, 1, &flags, depth+1))) {
10083 if (flags & RESTART_UTF8) {
10084 *flagp = RESTART_UTF8;
10087 FAIL2("panic: reg returned NULL to grok_bslash_N, flags=%#"UVxf"",
10090 *flagp |= flags&(HASWIDTH|SPSTART|SIMPLE|POSTPONED);
10092 RExC_parse = endbrace;
10093 RExC_end = orig_end;
10094 RExC_override_recoding = 0;
10096 nextchar(pRExC_state);
10106 * It returns the code point in utf8 for the value in *encp.
10107 * value: a code value in the source encoding
10108 * encp: a pointer to an Encode object
10110 * If the result from Encode is not a single character,
10111 * it returns U+FFFD (Replacement character) and sets *encp to NULL.
10114 S_reg_recode(pTHX_ const char value, SV **encp)
10117 SV * const sv = newSVpvn_flags(&value, numlen, SVs_TEMP);
10118 const char * const s = *encp ? sv_recode_to_utf8(sv, *encp) : SvPVX(sv);
10119 const STRLEN newlen = SvCUR(sv);
10120 UV uv = UNICODE_REPLACEMENT;
10122 PERL_ARGS_ASSERT_REG_RECODE;
10126 ? utf8n_to_uvchr((U8*)s, newlen, &numlen, UTF8_ALLOW_DEFAULT)
10129 if (!newlen || numlen != newlen) {
10130 uv = UNICODE_REPLACEMENT;
10136 PERL_STATIC_INLINE U8
10137 S_compute_EXACTish(pTHX_ RExC_state_t *pRExC_state)
10141 PERL_ARGS_ASSERT_COMPUTE_EXACTISH;
10147 op = get_regex_charset(RExC_flags);
10148 if (op >= REGEX_ASCII_RESTRICTED_CHARSET) {
10149 op--; /* /a is same as /u, and map /aa's offset to what /a's would have
10150 been, so there is no hole */
10153 return op + EXACTF;
10156 PERL_STATIC_INLINE void
10157 S_alloc_maybe_populate_EXACT(pTHX_ RExC_state_t *pRExC_state, regnode *node, I32* flagp, STRLEN len, UV code_point)
10159 /* This knows the details about sizing an EXACTish node, setting flags for
10160 * it (by setting <*flagp>, and potentially populating it with a single
10163 * If <len> (the length in bytes) is non-zero, this function assumes that
10164 * the node has already been populated, and just does the sizing. In this
10165 * case <code_point> should be the final code point that has already been
10166 * placed into the node. This value will be ignored except that under some
10167 * circumstances <*flagp> is set based on it.
10169 * If <len> is zero, the function assumes that the node is to contain only
10170 * the single character given by <code_point> and calculates what <len>
10171 * should be. In pass 1, it sizes the node appropriately. In pass 2, it
10172 * additionally will populate the node's STRING with <code_point>, if <len>
10173 * is 0. In both cases <*flagp> is appropriately set
10175 * It knows that under FOLD, the Latin Sharp S and UTF characters above
10176 * 255, must be folded (the former only when the rules indicate it can
10179 bool len_passed_in = cBOOL(len != 0);
10180 U8 character[UTF8_MAXBYTES_CASE+1];
10182 PERL_ARGS_ASSERT_ALLOC_MAYBE_POPULATE_EXACT;
10184 if (! len_passed_in) {
10186 if (FOLD && (! LOC || code_point > 255)) {
10187 _to_uni_fold_flags(NATIVE_TO_UNI(code_point),
10190 FOLD_FLAGS_FULL | ((LOC)
10191 ? FOLD_FLAGS_LOCALE
10192 : (ASCII_FOLD_RESTRICTED)
10193 ? FOLD_FLAGS_NOMIX_ASCII
10197 uvchr_to_utf8( character, code_point);
10198 len = UTF8SKIP(character);
10202 || code_point != LATIN_SMALL_LETTER_SHARP_S
10203 || ASCII_FOLD_RESTRICTED
10204 || ! AT_LEAST_UNI_SEMANTICS)
10206 *character = (U8) code_point;
10211 *(character + 1) = 's';
10217 RExC_size += STR_SZ(len);
10220 RExC_emit += STR_SZ(len);
10221 STR_LEN(node) = len;
10222 if (! len_passed_in) {
10223 Copy((char *) character, STRING(node), len, char);
10227 *flagp |= HASWIDTH;
10229 /* A single character node is SIMPLE, except for the special-cased SHARP S
10231 if ((len == 1 || (UTF && len == UNISKIP(code_point)))
10232 && (code_point != LATIN_SMALL_LETTER_SHARP_S
10233 || ! FOLD || ! DEPENDS_SEMANTICS))
10240 - regatom - the lowest level
10242 Try to identify anything special at the start of the pattern. If there
10243 is, then handle it as required. This may involve generating a single regop,
10244 such as for an assertion; or it may involve recursing, such as to
10245 handle a () structure.
10247 If the string doesn't start with something special then we gobble up
10248 as much literal text as we can.
10250 Once we have been able to handle whatever type of thing started the
10251 sequence, we return.
10253 Note: we have to be careful with escapes, as they can be both literal
10254 and special, and in the case of \10 and friends, context determines which.
10256 A summary of the code structure is:
10258 switch (first_byte) {
10259 cases for each special:
10260 handle this special;
10263 switch (2nd byte) {
10264 cases for each unambiguous special:
10265 handle this special;
10267 cases for each ambigous special/literal:
10269 if (special) handle here
10271 default: // unambiguously literal:
10274 default: // is a literal char
10277 create EXACTish node for literal;
10278 while (more input and node isn't full) {
10279 switch (input_byte) {
10280 cases for each special;
10281 make sure parse pointer is set so that the next call to
10282 regatom will see this special first
10283 goto loopdone; // EXACTish node terminated by prev. char
10285 append char to EXACTISH node;
10287 get next input byte;
10291 return the generated node;
10293 Specifically there are two separate switches for handling
10294 escape sequences, with the one for handling literal escapes requiring
10295 a dummy entry for all of the special escapes that are actually handled
10298 Returns NULL, setting *flagp to TRYAGAIN if reg() returns NULL with
10300 Returns NULL, setting *flagp to RESTART_UTF8 if the sizing scan needs to be
10302 Otherwise does not return NULL.
10306 S_regatom(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth)
10309 regnode *ret = NULL;
10311 char *parse_start = RExC_parse;
10315 GET_RE_DEBUG_FLAGS_DECL;
10317 *flagp = WORST; /* Tentatively. */
10319 DEBUG_PARSE("atom");
10321 PERL_ARGS_ASSERT_REGATOM;
10324 switch ((U8)*RExC_parse) {
10326 RExC_seen_zerolen++;
10327 nextchar(pRExC_state);
10328 if (RExC_flags & RXf_PMf_MULTILINE)
10329 ret = reg_node(pRExC_state, MBOL);
10330 else if (RExC_flags & RXf_PMf_SINGLELINE)
10331 ret = reg_node(pRExC_state, SBOL);
10333 ret = reg_node(pRExC_state, BOL);
10334 Set_Node_Length(ret, 1); /* MJD */
10337 nextchar(pRExC_state);
10339 RExC_seen_zerolen++;
10340 if (RExC_flags & RXf_PMf_MULTILINE)
10341 ret = reg_node(pRExC_state, MEOL);
10342 else if (RExC_flags & RXf_PMf_SINGLELINE)
10343 ret = reg_node(pRExC_state, SEOL);
10345 ret = reg_node(pRExC_state, EOL);
10346 Set_Node_Length(ret, 1); /* MJD */
10349 nextchar(pRExC_state);
10350 if (RExC_flags & RXf_PMf_SINGLELINE)
10351 ret = reg_node(pRExC_state, SANY);
10353 ret = reg_node(pRExC_state, REG_ANY);
10354 *flagp |= HASWIDTH|SIMPLE;
10356 Set_Node_Length(ret, 1); /* MJD */
10360 char * const oregcomp_parse = ++RExC_parse;
10361 ret = regclass(pRExC_state, flagp,depth+1,
10362 FALSE, /* means parse the whole char class */
10363 TRUE, /* allow multi-char folds */
10364 FALSE, /* don't silence non-portable warnings. */
10366 if (*RExC_parse != ']') {
10367 RExC_parse = oregcomp_parse;
10368 vFAIL("Unmatched [");
10371 if (*flagp & RESTART_UTF8)
10373 FAIL2("panic: regclass returned NULL to regatom, flags=%#"UVxf"",
10376 nextchar(pRExC_state);
10377 Set_Node_Length(ret, RExC_parse - oregcomp_parse + 1); /* MJD */
10381 nextchar(pRExC_state);
10382 ret = reg(pRExC_state, 2, &flags,depth+1);
10384 if (flags & TRYAGAIN) {
10385 if (RExC_parse == RExC_end) {
10386 /* Make parent create an empty node if needed. */
10387 *flagp |= TRYAGAIN;
10392 if (flags & RESTART_UTF8) {
10393 *flagp = RESTART_UTF8;
10396 FAIL2("panic: reg returned NULL to regatom, flags=%#"UVxf"", (UV) flags);
10398 *flagp |= flags&(HASWIDTH|SPSTART|SIMPLE|POSTPONED);
10402 if (flags & TRYAGAIN) {
10403 *flagp |= TRYAGAIN;
10406 vFAIL("Internal urp");
10407 /* Supposed to be caught earlier. */
10410 if (!regcurly(RExC_parse, FALSE)) {
10419 vFAIL("Quantifier follows nothing");
10424 This switch handles escape sequences that resolve to some kind
10425 of special regop and not to literal text. Escape sequnces that
10426 resolve to literal text are handled below in the switch marked
10429 Every entry in this switch *must* have a corresponding entry
10430 in the literal escape switch. However, the opposite is not
10431 required, as the default for this switch is to jump to the
10432 literal text handling code.
10434 switch ((U8)*++RExC_parse) {
10436 /* Special Escapes */
10438 RExC_seen_zerolen++;
10439 ret = reg_node(pRExC_state, SBOL);
10441 goto finish_meta_pat;
10443 ret = reg_node(pRExC_state, GPOS);
10444 RExC_seen |= REG_SEEN_GPOS;
10446 goto finish_meta_pat;
10448 RExC_seen_zerolen++;
10449 ret = reg_node(pRExC_state, KEEPS);
10451 /* XXX:dmq : disabling in-place substitution seems to
10452 * be necessary here to avoid cases of memory corruption, as
10453 * with: C<$_="x" x 80; s/x\K/y/> -- rgs
10455 RExC_seen |= REG_SEEN_LOOKBEHIND;
10456 goto finish_meta_pat;
10458 ret = reg_node(pRExC_state, SEOL);
10460 RExC_seen_zerolen++; /* Do not optimize RE away */
10461 goto finish_meta_pat;
10463 ret = reg_node(pRExC_state, EOS);
10465 RExC_seen_zerolen++; /* Do not optimize RE away */
10466 goto finish_meta_pat;
10468 ret = reg_node(pRExC_state, CANY);
10469 RExC_seen |= REG_SEEN_CANY;
10470 *flagp |= HASWIDTH|SIMPLE;
10471 goto finish_meta_pat;
10473 ret = reg_node(pRExC_state, CLUMP);
10474 *flagp |= HASWIDTH;
10475 goto finish_meta_pat;
10481 arg = ANYOF_WORDCHAR;
10485 RExC_seen_zerolen++;
10486 RExC_seen |= REG_SEEN_LOOKBEHIND;
10487 op = BOUND + get_regex_charset(RExC_flags);
10488 if (op > BOUNDA) { /* /aa is same as /a */
10491 ret = reg_node(pRExC_state, op);
10492 FLAGS(ret) = get_regex_charset(RExC_flags);
10494 if (! SIZE_ONLY && (U8) *(RExC_parse + 1) == '{') {
10495 ckWARNdep(RExC_parse, "\"\\b{\" is deprecated; use \"\\b\\{\" or \"\\b[{]\" instead");
10497 goto finish_meta_pat;
10499 RExC_seen_zerolen++;
10500 RExC_seen |= REG_SEEN_LOOKBEHIND;
10501 op = NBOUND + get_regex_charset(RExC_flags);
10502 if (op > NBOUNDA) { /* /aa is same as /a */
10505 ret = reg_node(pRExC_state, op);
10506 FLAGS(ret) = get_regex_charset(RExC_flags);
10508 if (! SIZE_ONLY && (U8) *(RExC_parse + 1) == '{') {
10509 ckWARNdep(RExC_parse, "\"\\B{\" is deprecated; use \"\\B\\{\" or \"\\B[{]\" instead");
10511 goto finish_meta_pat;
10521 ret = reg_node(pRExC_state, LNBREAK);
10522 *flagp |= HASWIDTH|SIMPLE;
10523 goto finish_meta_pat;
10531 goto join_posix_op_known;
10537 arg = ANYOF_VERTWS;
10539 goto join_posix_op_known;
10549 op = POSIXD + get_regex_charset(RExC_flags);
10550 if (op > POSIXA) { /* /aa is same as /a */
10554 join_posix_op_known:
10557 op += NPOSIXD - POSIXD;
10560 ret = reg_node(pRExC_state, op);
10562 FLAGS(ret) = namedclass_to_classnum(arg);
10565 *flagp |= HASWIDTH|SIMPLE;
10569 nextchar(pRExC_state);
10570 Set_Node_Length(ret, 2); /* MJD */
10576 char* parse_start = RExC_parse - 2;
10581 ret = regclass(pRExC_state, flagp,depth+1,
10582 TRUE, /* means just parse this element */
10583 FALSE, /* don't allow multi-char folds */
10584 FALSE, /* don't silence non-portable warnings.
10585 It would be a bug if these returned
10588 /* regclass() can only return RESTART_UTF8 if multi-char folds
10591 FAIL2("panic: regclass returned NULL to regatom, flags=%#"UVxf"",
10596 Set_Node_Offset(ret, parse_start + 2);
10597 Set_Node_Cur_Length(ret, parse_start);
10598 nextchar(pRExC_state);
10602 /* Handle \N and \N{NAME} with multiple code points here and not
10603 * below because it can be multicharacter. join_exact() will join
10604 * them up later on. Also this makes sure that things like
10605 * /\N{BLAH}+/ and \N{BLAH} being multi char Just Happen. dmq.
10606 * The options to the grok function call causes it to fail if the
10607 * sequence is just a single code point. We then go treat it as
10608 * just another character in the current EXACT node, and hence it
10609 * gets uniform treatment with all the other characters. The
10610 * special treatment for quantifiers is not needed for such single
10611 * character sequences */
10613 if (! grok_bslash_N(pRExC_state, &ret, NULL, flagp, depth, FALSE,
10614 FALSE /* not strict */ )) {
10615 if (*flagp & RESTART_UTF8)
10621 case 'k': /* Handle \k<NAME> and \k'NAME' */
10624 char ch= RExC_parse[1];
10625 if (ch != '<' && ch != '\'' && ch != '{') {
10627 vFAIL2("Sequence %.2s... not terminated",parse_start);
10629 /* this pretty much dupes the code for (?P=...) in reg(), if
10630 you change this make sure you change that */
10631 char* name_start = (RExC_parse += 2);
10633 SV *sv_dat = reg_scan_name(pRExC_state,
10634 SIZE_ONLY ? REG_RSN_RETURN_NULL : REG_RSN_RETURN_DATA);
10635 ch= (ch == '<') ? '>' : (ch == '{') ? '}' : '\'';
10636 if (RExC_parse == name_start || *RExC_parse != ch)
10637 vFAIL2("Sequence %.3s... not terminated",parse_start);
10640 num = add_data( pRExC_state, 1, "S" );
10641 RExC_rxi->data->data[num]=(void*)sv_dat;
10642 SvREFCNT_inc_simple_void(sv_dat);
10646 ret = reganode(pRExC_state,
10649 : (ASCII_FOLD_RESTRICTED)
10651 : (AT_LEAST_UNI_SEMANTICS)
10657 *flagp |= HASWIDTH;
10659 /* override incorrect value set in reganode MJD */
10660 Set_Node_Offset(ret, parse_start+1);
10661 Set_Node_Cur_Length(ret, parse_start);
10662 nextchar(pRExC_state);
10668 case '1': case '2': case '3': case '4':
10669 case '5': case '6': case '7': case '8': case '9':
10672 bool isg = *RExC_parse == 'g';
10677 if (*RExC_parse == '{') {
10681 if (*RExC_parse == '-') {
10685 if (hasbrace && !isDIGIT(*RExC_parse)) {
10686 if (isrel) RExC_parse--;
10688 goto parse_named_seq;
10690 num = atoi(RExC_parse);
10691 if (isg && num == 0) {
10692 if (*RExC_parse == '0') {
10693 vFAIL("Reference to invalid group 0");
10696 vFAIL("Unterminated \\g... pattern");
10700 num = RExC_npar - num;
10702 vFAIL("Reference to nonexistent or unclosed group");
10704 if (!isg && num > 9 && num >= RExC_npar)
10705 /* Probably a character specified in octal, e.g. \35 */
10708 #ifdef RE_TRACK_PATTERN_OFFSETS
10709 char * const parse_start = RExC_parse - 1; /* MJD */
10711 while (isDIGIT(*RExC_parse))
10714 if (*RExC_parse != '}')
10715 vFAIL("Unterminated \\g{...} pattern");
10719 if (num > (I32)RExC_rx->nparens)
10720 vFAIL("Reference to nonexistent group");
10723 ret = reganode(pRExC_state,
10726 : (ASCII_FOLD_RESTRICTED)
10728 : (AT_LEAST_UNI_SEMANTICS)
10734 *flagp |= HASWIDTH;
10736 /* override incorrect value set in reganode MJD */
10737 Set_Node_Offset(ret, parse_start+1);
10738 Set_Node_Cur_Length(ret, parse_start);
10740 nextchar(pRExC_state);
10745 if (RExC_parse >= RExC_end)
10746 FAIL("Trailing \\");
10749 /* Do not generate "unrecognized" warnings here, we fall
10750 back into the quick-grab loop below */
10757 if (RExC_flags & RXf_PMf_EXTENDED) {
10758 if ( reg_skipcomment( pRExC_state ) )
10765 parse_start = RExC_parse - 1;
10774 #define MAX_NODE_STRING_SIZE 127
10775 char foldbuf[MAX_NODE_STRING_SIZE+UTF8_MAXBYTES_CASE];
10777 U8 upper_parse = MAX_NODE_STRING_SIZE;
10780 bool next_is_quantifier;
10781 char * oldp = NULL;
10783 /* If a folding node contains only code points that don't
10784 * participate in folds, it can be changed into an EXACT node,
10785 * which allows the optimizer more things to look for */
10789 node_type = compute_EXACTish(pRExC_state);
10790 ret = reg_node(pRExC_state, node_type);
10792 /* In pass1, folded, we use a temporary buffer instead of the
10793 * actual node, as the node doesn't exist yet */
10794 s = (SIZE_ONLY && FOLD) ? foldbuf : STRING(ret);
10800 /* We do the EXACTFish to EXACT node only if folding, and not if in
10801 * locale, as whether a character folds or not isn't known until
10803 maybe_exact = FOLD && ! LOC;
10805 /* XXX The node can hold up to 255 bytes, yet this only goes to
10806 * 127. I (khw) do not know why. Keeping it somewhat less than
10807 * 255 allows us to not have to worry about overflow due to
10808 * converting to utf8 and fold expansion, but that value is
10809 * 255-UTF8_MAXBYTES_CASE. join_exact() may join adjacent nodes
10810 * split up by this limit into a single one using the real max of
10811 * 255. Even at 127, this breaks under rare circumstances. If
10812 * folding, we do not want to split a node at a character that is a
10813 * non-final in a multi-char fold, as an input string could just
10814 * happen to want to match across the node boundary. The join
10815 * would solve that problem if the join actually happens. But a
10816 * series of more than two nodes in a row each of 127 would cause
10817 * the first join to succeed to get to 254, but then there wouldn't
10818 * be room for the next one, which could at be one of those split
10819 * multi-char folds. I don't know of any fool-proof solution. One
10820 * could back off to end with only a code point that isn't such a
10821 * non-final, but it is possible for there not to be any in the
10823 for (p = RExC_parse - 1;
10824 len < upper_parse && p < RExC_end;
10829 if (RExC_flags & RXf_PMf_EXTENDED)
10830 p = regwhite( pRExC_state, p );
10841 /* Literal Escapes Switch
10843 This switch is meant to handle escape sequences that
10844 resolve to a literal character.
10846 Every escape sequence that represents something
10847 else, like an assertion or a char class, is handled
10848 in the switch marked 'Special Escapes' above in this
10849 routine, but also has an entry here as anything that
10850 isn't explicitly mentioned here will be treated as
10851 an unescaped equivalent literal.
10854 switch ((U8)*++p) {
10855 /* These are all the special escapes. */
10856 case 'A': /* Start assertion */
10857 case 'b': case 'B': /* Word-boundary assertion*/
10858 case 'C': /* Single char !DANGEROUS! */
10859 case 'd': case 'D': /* digit class */
10860 case 'g': case 'G': /* generic-backref, pos assertion */
10861 case 'h': case 'H': /* HORIZWS */
10862 case 'k': case 'K': /* named backref, keep marker */
10863 case 'p': case 'P': /* Unicode property */
10864 case 'R': /* LNBREAK */
10865 case 's': case 'S': /* space class */
10866 case 'v': case 'V': /* VERTWS */
10867 case 'w': case 'W': /* word class */
10868 case 'X': /* eXtended Unicode "combining character sequence" */
10869 case 'z': case 'Z': /* End of line/string assertion */
10873 /* Anything after here is an escape that resolves to a
10874 literal. (Except digits, which may or may not)
10880 case 'N': /* Handle a single-code point named character. */
10881 /* The options cause it to fail if a multiple code
10882 * point sequence. Handle those in the switch() above
10884 RExC_parse = p + 1;
10885 if (! grok_bslash_N(pRExC_state, NULL, &ender,
10886 flagp, depth, FALSE,
10887 FALSE /* not strict */ ))
10889 if (*flagp & RESTART_UTF8)
10890 FAIL("panic: grok_bslash_N set RESTART_UTF8");
10891 RExC_parse = p = oldp;
10895 if (ender > 0xff) {
10912 ender = ASCII_TO_NATIVE('\033');
10916 ender = ASCII_TO_NATIVE('\007');
10922 const char* error_msg;
10924 bool valid = grok_bslash_o(&p,
10927 TRUE, /* out warnings */
10928 FALSE, /* not strict */
10929 TRUE, /* Output warnings
10934 RExC_parse = p; /* going to die anyway; point
10935 to exact spot of failure */
10939 if (PL_encoding && ender < 0x100) {
10940 goto recode_encoding;
10942 if (ender > 0xff) {
10949 UV result = UV_MAX; /* initialize to erroneous
10951 const char* error_msg;
10953 bool valid = grok_bslash_x(&p,
10956 TRUE, /* out warnings */
10957 FALSE, /* not strict */
10958 TRUE, /* Output warnings
10963 RExC_parse = p; /* going to die anyway; point
10964 to exact spot of failure */
10969 if (PL_encoding && ender < 0x100) {
10970 goto recode_encoding;
10972 if (ender > 0xff) {
10979 ender = grok_bslash_c(*p++, UTF, SIZE_ONLY);
10981 case '0': case '1': case '2': case '3':case '4':
10982 case '5': case '6': case '7':
10984 (isDIGIT(p[1]) && atoi(p) >= RExC_npar))
10986 I32 flags = PERL_SCAN_SILENT_ILLDIGIT;
10988 ender = grok_oct(p, &numlen, &flags, NULL);
10989 if (ender > 0xff) {
10993 if (SIZE_ONLY /* like \08, \178 */
10996 && isDIGIT(*p) && ckWARN(WARN_REGEXP))
10998 reg_warn_non_literal_string(
11000 form_short_octal_warning(p, numlen));
11003 else { /* Not to be treated as an octal constant, go
11008 if (PL_encoding && ender < 0x100)
11009 goto recode_encoding;
11012 if (! RExC_override_recoding) {
11013 SV* enc = PL_encoding;
11014 ender = reg_recode((const char)(U8)ender, &enc);
11015 if (!enc && SIZE_ONLY)
11016 ckWARNreg(p, "Invalid escape in the specified encoding");
11022 FAIL("Trailing \\");
11025 if (!SIZE_ONLY&& isALPHANUMERIC(*p)) {
11026 /* Include any { following the alpha to emphasize
11027 * that it could be part of an escape at some point
11029 int len = (isALPHA(*p) && *(p + 1) == '{') ? 2 : 1;
11030 ckWARN3reg(p + len, "Unrecognized escape \\%.*s passed through", len, p);
11032 goto normal_default;
11033 } /* End of switch on '\' */
11035 default: /* A literal character */
11038 && RExC_flags & RXf_PMf_EXTENDED
11039 && ckWARN_d(WARN_DEPRECATED)
11040 && is_PATWS_non_low(p, UTF))
11042 vWARN_dep(p + ((UTF) ? UTF8SKIP(p) : 1),
11043 "Escape literal pattern white space under /x");
11047 if (UTF8_IS_START(*p) && UTF) {
11049 ender = utf8n_to_uvchr((U8*)p, RExC_end - p,
11050 &numlen, UTF8_ALLOW_DEFAULT);
11056 } /* End of switch on the literal */
11058 /* Here, have looked at the literal character and <ender>
11059 * contains its ordinal, <p> points to the character after it
11062 if ( RExC_flags & RXf_PMf_EXTENDED)
11063 p = regwhite( pRExC_state, p );
11065 /* If the next thing is a quantifier, it applies to this
11066 * character only, which means that this character has to be in
11067 * its own node and can't just be appended to the string in an
11068 * existing node, so if there are already other characters in
11069 * the node, close the node with just them, and set up to do
11070 * this character again next time through, when it will be the
11071 * only thing in its new node */
11072 if ((next_is_quantifier = (p < RExC_end && ISMULT2(p))) && len)
11080 const STRLEN unilen = reguni(pRExC_state, ender, s);
11086 /* The loop increments <len> each time, as all but this
11087 * path (and one other) through it add a single byte to
11088 * the EXACTish node. But this one has changed len to
11089 * be the correct final value, so subtract one to
11090 * cancel out the increment that follows */
11094 REGC((char)ender, s++);
11099 /* See comments for join_exact() as to why we fold this
11100 * non-UTF at compile time */
11101 || (node_type == EXACTFU
11102 && ender == LATIN_SMALL_LETTER_SHARP_S)))
11104 *(s++) = (char) ender;
11105 maybe_exact &= ! IS_IN_SOME_FOLD_L1(ender);
11109 /* Prime the casefolded buffer. Locale rules, which apply
11110 * only to code points < 256, aren't known until execution,
11111 * so for them, just output the original character using
11112 * utf8. If we start to fold non-UTF patterns, be sure to
11113 * update join_exact() */
11114 if (LOC && ender < 256) {
11115 if (UNI_IS_INVARIANT(ender)) {
11119 *s = UTF8_TWO_BYTE_HI(ender);
11120 *(s + 1) = UTF8_TWO_BYTE_LO(ender);
11125 UV folded = _to_uni_fold_flags(
11130 | ((LOC) ? FOLD_FLAGS_LOCALE
11131 : (ASCII_FOLD_RESTRICTED)
11132 ? FOLD_FLAGS_NOMIX_ASCII
11136 /* If this node only contains non-folding code points
11137 * so far, see if this new one is also non-folding */
11139 if (folded != ender) {
11140 maybe_exact = FALSE;
11143 /* Here the fold is the original; we have
11144 * to check further to see if anything
11146 if (! PL_utf8_foldable) {
11147 SV* swash = swash_init("utf8",
11149 &PL_sv_undef, 1, 0);
11151 _get_swash_invlist(swash);
11152 SvREFCNT_dec_NN(swash);
11154 if (_invlist_contains_cp(PL_utf8_foldable,
11157 maybe_exact = FALSE;
11165 /* The loop increments <len> each time, as all but this
11166 * path (and one other) through it add a single byte to the
11167 * EXACTish node. But this one has changed len to be the
11168 * correct final value, so subtract one to cancel out the
11169 * increment that follows */
11170 len += foldlen - 1;
11173 if (next_is_quantifier) {
11175 /* Here, the next input is a quantifier, and to get here,
11176 * the current character is the only one in the node.
11177 * Also, here <len> doesn't include the final byte for this
11183 } /* End of loop through literal characters */
11185 /* Here we have either exhausted the input or ran out of room in
11186 * the node. (If we encountered a character that can't be in the
11187 * node, transfer is made directly to <loopdone>, and so we
11188 * wouldn't have fallen off the end of the loop.) In the latter
11189 * case, we artificially have to split the node into two, because
11190 * we just don't have enough space to hold everything. This
11191 * creates a problem if the final character participates in a
11192 * multi-character fold in the non-final position, as a match that
11193 * should have occurred won't, due to the way nodes are matched,
11194 * and our artificial boundary. So back off until we find a non-
11195 * problematic character -- one that isn't at the beginning or
11196 * middle of such a fold. (Either it doesn't participate in any
11197 * folds, or appears only in the final position of all the folds it
11198 * does participate in.) A better solution with far fewer false
11199 * positives, and that would fill the nodes more completely, would
11200 * be to actually have available all the multi-character folds to
11201 * test against, and to back-off only far enough to be sure that
11202 * this node isn't ending with a partial one. <upper_parse> is set
11203 * further below (if we need to reparse the node) to include just
11204 * up through that final non-problematic character that this code
11205 * identifies, so when it is set to less than the full node, we can
11206 * skip the rest of this */
11207 if (FOLD && p < RExC_end && upper_parse == MAX_NODE_STRING_SIZE) {
11209 const STRLEN full_len = len;
11211 assert(len >= MAX_NODE_STRING_SIZE);
11213 /* Here, <s> points to the final byte of the final character.
11214 * Look backwards through the string until find a non-
11215 * problematic character */
11219 /* These two have no multi-char folds to non-UTF characters
11221 if (ASCII_FOLD_RESTRICTED || LOC) {
11225 while (--s >= s0 && IS_NON_FINAL_FOLD(*s)) { }
11229 if (! PL_NonL1NonFinalFold) {
11230 PL_NonL1NonFinalFold = _new_invlist_C_array(
11231 NonL1_Perl_Non_Final_Folds_invlist);
11234 /* Point to the first byte of the final character */
11235 s = (char *) utf8_hop((U8 *) s, -1);
11237 while (s >= s0) { /* Search backwards until find
11238 non-problematic char */
11239 if (UTF8_IS_INVARIANT(*s)) {
11241 /* There are no ascii characters that participate
11242 * in multi-char folds under /aa. In EBCDIC, the
11243 * non-ascii invariants are all control characters,
11244 * so don't ever participate in any folds. */
11245 if (ASCII_FOLD_RESTRICTED
11246 || ! IS_NON_FINAL_FOLD(*s))
11251 else if (UTF8_IS_DOWNGRADEABLE_START(*s)) {
11253 /* No Latin1 characters participate in multi-char
11254 * folds under /l */
11256 || ! IS_NON_FINAL_FOLD(TWO_BYTE_UTF8_TO_UNI(
11262 else if (! _invlist_contains_cp(
11263 PL_NonL1NonFinalFold,
11264 valid_utf8_to_uvchr((U8 *) s, NULL)))
11269 /* Here, the current character is problematic in that
11270 * it does occur in the non-final position of some
11271 * fold, so try the character before it, but have to
11272 * special case the very first byte in the string, so
11273 * we don't read outside the string */
11274 s = (s == s0) ? s -1 : (char *) utf8_hop((U8 *) s, -1);
11275 } /* End of loop backwards through the string */
11277 /* If there were only problematic characters in the string,
11278 * <s> will point to before s0, in which case the length
11279 * should be 0, otherwise include the length of the
11280 * non-problematic character just found */
11281 len = (s < s0) ? 0 : s - s0 + UTF8SKIP(s);
11284 /* Here, have found the final character, if any, that is
11285 * non-problematic as far as ending the node without splitting
11286 * it across a potential multi-char fold. <len> contains the
11287 * number of bytes in the node up-to and including that
11288 * character, or is 0 if there is no such character, meaning
11289 * the whole node contains only problematic characters. In
11290 * this case, give up and just take the node as-is. We can't
11296 /* Here, the node does contain some characters that aren't
11297 * problematic. If one such is the final character in the
11298 * node, we are done */
11299 if (len == full_len) {
11302 else if (len + ((UTF) ? UTF8SKIP(s) : 1) == full_len) {
11304 /* If the final character is problematic, but the
11305 * penultimate is not, back-off that last character to
11306 * later start a new node with it */
11311 /* Here, the final non-problematic character is earlier
11312 * in the input than the penultimate character. What we do
11313 * is reparse from the beginning, going up only as far as
11314 * this final ok one, thus guaranteeing that the node ends
11315 * in an acceptable character. The reason we reparse is
11316 * that we know how far in the character is, but we don't
11317 * know how to correlate its position with the input parse.
11318 * An alternate implementation would be to build that
11319 * correlation as we go along during the original parse,
11320 * but that would entail extra work for every node, whereas
11321 * this code gets executed only when the string is too
11322 * large for the node, and the final two characters are
11323 * problematic, an infrequent occurrence. Yet another
11324 * possible strategy would be to save the tail of the
11325 * string, and the next time regatom is called, initialize
11326 * with that. The problem with this is that unless you
11327 * back off one more character, you won't be guaranteed
11328 * regatom will get called again, unless regbranch,
11329 * regpiece ... are also changed. If you do back off that
11330 * extra character, so that there is input guaranteed to
11331 * force calling regatom, you can't handle the case where
11332 * just the first character in the node is acceptable. I
11333 * (khw) decided to try this method which doesn't have that
11334 * pitfall; if performance issues are found, we can do a
11335 * combination of the current approach plus that one */
11341 } /* End of verifying node ends with an appropriate char */
11343 loopdone: /* Jumped to when encounters something that shouldn't be in
11346 /* I (khw) don't know if you can get here with zero length, but the
11347 * old code handled this situation by creating a zero-length EXACT
11348 * node. Might as well be NOTHING instead */
11354 /* If 'maybe_exact' is still set here, means there are no
11355 * code points in the node that participate in folds */
11356 if (FOLD && maybe_exact) {
11359 alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, len, ender);
11362 RExC_parse = p - 1;
11363 Set_Node_Cur_Length(ret, parse_start);
11364 nextchar(pRExC_state);
11366 /* len is STRLEN which is unsigned, need to copy to signed */
11369 vFAIL("Internal disaster");
11372 } /* End of label 'defchar:' */
11374 } /* End of giant switch on input character */
11380 S_regwhite( RExC_state_t *pRExC_state, char *p )
11382 const char *e = RExC_end;
11384 PERL_ARGS_ASSERT_REGWHITE;
11389 else if (*p == '#') {
11392 if (*p++ == '\n') {
11398 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
11407 S_regpatws( RExC_state_t *pRExC_state, char *p , const bool recognize_comment )
11409 /* Returns the next non-pattern-white space, non-comment character (the
11410 * latter only if 'recognize_comment is true) in the string p, which is
11411 * ended by RExC_end. If there is no line break ending a comment,
11412 * RExC_seen has added the REG_SEEN_RUN_ON_COMMENT flag; */
11413 const char *e = RExC_end;
11415 PERL_ARGS_ASSERT_REGPATWS;
11419 if ((len = is_PATWS_safe(p, e, UTF))) {
11422 else if (recognize_comment && *p == '#') {
11426 if (is_LNBREAK_safe(p, e, UTF)) {
11432 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
11440 /* Parse POSIX character classes: [[:foo:]], [[=foo=]], [[.foo.]].
11441 Character classes ([:foo:]) can also be negated ([:^foo:]).
11442 Returns a named class id (ANYOF_XXX) if successful, -1 otherwise.
11443 Equivalence classes ([=foo=]) and composites ([.foo.]) are parsed,
11444 but trigger failures because they are currently unimplemented. */
11446 #define POSIXCC_DONE(c) ((c) == ':')
11447 #define POSIXCC_NOTYET(c) ((c) == '=' || (c) == '.')
11448 #define POSIXCC(c) (POSIXCC_DONE(c) || POSIXCC_NOTYET(c))
11450 PERL_STATIC_INLINE I32
11451 S_regpposixcc(pTHX_ RExC_state_t *pRExC_state, I32 value, const bool strict)
11454 I32 namedclass = OOB_NAMEDCLASS;
11456 PERL_ARGS_ASSERT_REGPPOSIXCC;
11458 if (value == '[' && RExC_parse + 1 < RExC_end &&
11459 /* I smell either [: or [= or [. -- POSIX has been here, right? */
11460 POSIXCC(UCHARAT(RExC_parse)))
11462 const char c = UCHARAT(RExC_parse);
11463 char* const s = RExC_parse++;
11465 while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != c)
11467 if (RExC_parse == RExC_end) {
11470 /* Try to give a better location for the error (than the end of
11471 * the string) by looking for the matching ']' */
11473 while (RExC_parse < RExC_end && UCHARAT(RExC_parse) != ']') {
11476 vFAIL2("Unmatched '%c' in POSIX class", c);
11478 /* Grandfather lone [:, [=, [. */
11482 const char* const t = RExC_parse++; /* skip over the c */
11485 if (UCHARAT(RExC_parse) == ']') {
11486 const char *posixcc = s + 1;
11487 RExC_parse++; /* skip over the ending ] */
11490 const I32 complement = *posixcc == '^' ? *posixcc++ : 0;
11491 const I32 skip = t - posixcc;
11493 /* Initially switch on the length of the name. */
11496 if (memEQ(posixcc, "word", 4)) /* this is not POSIX,
11497 this is the Perl \w
11499 namedclass = ANYOF_WORDCHAR;
11502 /* Names all of length 5. */
11503 /* alnum alpha ascii blank cntrl digit graph lower
11504 print punct space upper */
11505 /* Offset 4 gives the best switch position. */
11506 switch (posixcc[4]) {
11508 if (memEQ(posixcc, "alph", 4)) /* alpha */
11509 namedclass = ANYOF_ALPHA;
11512 if (memEQ(posixcc, "spac", 4)) /* space */
11513 namedclass = ANYOF_PSXSPC;
11516 if (memEQ(posixcc, "grap", 4)) /* graph */
11517 namedclass = ANYOF_GRAPH;
11520 if (memEQ(posixcc, "asci", 4)) /* ascii */
11521 namedclass = ANYOF_ASCII;
11524 if (memEQ(posixcc, "blan", 4)) /* blank */
11525 namedclass = ANYOF_BLANK;
11528 if (memEQ(posixcc, "cntr", 4)) /* cntrl */
11529 namedclass = ANYOF_CNTRL;
11532 if (memEQ(posixcc, "alnu", 4)) /* alnum */
11533 namedclass = ANYOF_ALPHANUMERIC;
11536 if (memEQ(posixcc, "lowe", 4)) /* lower */
11537 namedclass = (FOLD) ? ANYOF_CASED : ANYOF_LOWER;
11538 else if (memEQ(posixcc, "uppe", 4)) /* upper */
11539 namedclass = (FOLD) ? ANYOF_CASED : ANYOF_UPPER;
11542 if (memEQ(posixcc, "digi", 4)) /* digit */
11543 namedclass = ANYOF_DIGIT;
11544 else if (memEQ(posixcc, "prin", 4)) /* print */
11545 namedclass = ANYOF_PRINT;
11546 else if (memEQ(posixcc, "punc", 4)) /* punct */
11547 namedclass = ANYOF_PUNCT;
11552 if (memEQ(posixcc, "xdigit", 6))
11553 namedclass = ANYOF_XDIGIT;
11557 if (namedclass == OOB_NAMEDCLASS)
11558 Simple_vFAIL3("POSIX class [:%.*s:] unknown",
11561 /* The #defines are structured so each complement is +1 to
11562 * the normal one */
11566 assert (posixcc[skip] == ':');
11567 assert (posixcc[skip+1] == ']');
11568 } else if (!SIZE_ONLY) {
11569 /* [[=foo=]] and [[.foo.]] are still future. */
11571 /* adjust RExC_parse so the warning shows after
11572 the class closes */
11573 while (UCHARAT(RExC_parse) && UCHARAT(RExC_parse) != ']')
11575 vFAIL3("POSIX syntax [%c %c] is reserved for future extensions", c, c);
11578 /* Maternal grandfather:
11579 * "[:" ending in ":" but not in ":]" */
11581 vFAIL("Unmatched '[' in POSIX class");
11584 /* Grandfather lone [:, [=, [. */
11594 S_could_it_be_a_POSIX_class(pTHX_ RExC_state_t *pRExC_state)
11596 /* This applies some heuristics at the current parse position (which should
11597 * be at a '[') to see if what follows might be intended to be a [:posix:]
11598 * class. It returns true if it really is a posix class, of course, but it
11599 * also can return true if it thinks that what was intended was a posix
11600 * class that didn't quite make it.
11602 * It will return true for
11604 * [:alphanumerics] (as long as the ] isn't followed immediately by a
11605 * ')' indicating the end of the (?[
11606 * [:any garbage including %^&$ punctuation:]
11608 * This is designed to be called only from S_handle_regex_sets; it could be
11609 * easily adapted to be called from the spot at the beginning of regclass()
11610 * that checks to see in a normal bracketed class if the surrounding []
11611 * have been omitted ([:word:] instead of [[:word:]]). But doing so would
11612 * change long-standing behavior, so I (khw) didn't do that */
11613 char* p = RExC_parse + 1;
11614 char first_char = *p;
11616 PERL_ARGS_ASSERT_COULD_IT_BE_A_POSIX_CLASS;
11618 assert(*(p - 1) == '[');
11620 if (! POSIXCC(first_char)) {
11625 while (p < RExC_end && isWORDCHAR(*p)) p++;
11627 if (p >= RExC_end) {
11631 if (p - RExC_parse > 2 /* Got at least 1 word character */
11632 && (*p == first_char
11633 || (*p == ']' && p + 1 < RExC_end && *(p + 1) != ')')))
11638 p = (char *) memchr(RExC_parse, ']', RExC_end - RExC_parse);
11641 && p - RExC_parse > 2 /* [:] evaluates to colon;
11642 [::] is a bad posix class. */
11643 && first_char == *(p - 1));
11647 S_handle_regex_sets(pTHX_ RExC_state_t *pRExC_state, SV** return_invlist, I32 *flagp, U32 depth,
11648 char * const oregcomp_parse)
11650 /* Handle the (?[...]) construct to do set operations */
11653 UV start, end; /* End points of code point ranges */
11655 char *save_end, *save_parse;
11660 const bool save_fold = FOLD;
11662 GET_RE_DEBUG_FLAGS_DECL;
11664 PERL_ARGS_ASSERT_HANDLE_REGEX_SETS;
11667 vFAIL("(?[...]) not valid in locale");
11669 RExC_uni_semantics = 1;
11671 /* This will return only an ANYOF regnode, or (unlikely) something smaller
11672 * (such as EXACT). Thus we can skip most everything if just sizing. We
11673 * call regclass to handle '[]' so as to not have to reinvent its parsing
11674 * rules here (throwing away the size it computes each time). And, we exit
11675 * upon an unescaped ']' that isn't one ending a regclass. To do both
11676 * these things, we need to realize that something preceded by a backslash
11677 * is escaped, so we have to keep track of backslashes */
11679 UV depth = 0; /* how many nested (?[...]) constructs */
11681 Perl_ck_warner_d(aTHX_
11682 packWARN(WARN_EXPERIMENTAL__REGEX_SETS),
11683 "The regex_sets feature is experimental" REPORT_LOCATION,
11684 (int) (RExC_parse - RExC_precomp) , RExC_precomp, RExC_parse);
11686 while (RExC_parse < RExC_end) {
11687 SV* current = NULL;
11688 RExC_parse = regpatws(pRExC_state, RExC_parse,
11689 TRUE); /* means recognize comments */
11690 switch (*RExC_parse) {
11692 if (RExC_parse[1] == '[') depth++, RExC_parse++;
11697 /* Skip the next byte (which could cause us to end up in
11698 * the middle of a UTF-8 character, but since none of those
11699 * are confusable with anything we currently handle in this
11700 * switch (invariants all), it's safe. We'll just hit the
11701 * default: case next time and keep on incrementing until
11702 * we find one of the invariants we do handle. */
11707 /* If this looks like it is a [:posix:] class, leave the
11708 * parse pointer at the '[' to fool regclass() into
11709 * thinking it is part of a '[[:posix:]]'. That function
11710 * will use strict checking to force a syntax error if it
11711 * doesn't work out to a legitimate class */
11712 bool is_posix_class
11713 = could_it_be_a_POSIX_class(pRExC_state);
11714 if (! is_posix_class) {
11718 /* regclass() can only return RESTART_UTF8 if multi-char
11719 folds are allowed. */
11720 if (!regclass(pRExC_state, flagp,depth+1,
11721 is_posix_class, /* parse the whole char
11722 class only if not a
11724 FALSE, /* don't allow multi-char folds */
11725 TRUE, /* silence non-portable warnings. */
11727 FAIL2("panic: regclass returned NULL to handle_sets, flags=%#"UVxf"",
11730 /* function call leaves parse pointing to the ']', except
11731 * if we faked it */
11732 if (is_posix_class) {
11736 SvREFCNT_dec(current); /* In case it returned something */
11741 if (depth--) break;
11743 if (RExC_parse < RExC_end
11744 && *RExC_parse == ')')
11746 node = reganode(pRExC_state, ANYOF, 0);
11747 RExC_size += ANYOF_SKIP;
11748 nextchar(pRExC_state);
11749 Set_Node_Length(node,
11750 RExC_parse - oregcomp_parse + 1); /* MJD */
11759 FAIL("Syntax error in (?[...])");
11762 /* Pass 2 only after this. Everything in this construct is a
11763 * metacharacter. Operands begin with either a '\' (for an escape
11764 * sequence), or a '[' for a bracketed character class. Any other
11765 * character should be an operator, or parenthesis for grouping. Both
11766 * types of operands are handled by calling regclass() to parse them. It
11767 * is called with a parameter to indicate to return the computed inversion
11768 * list. The parsing here is implemented via a stack. Each entry on the
11769 * stack is a single character representing one of the operators, or the
11770 * '('; or else a pointer to an operand inversion list. */
11772 #define IS_OPERAND(a) (! SvIOK(a))
11774 /* The stack starts empty. It is a syntax error if the first thing parsed
11775 * is a binary operator; everything else is pushed on the stack. When an
11776 * operand is parsed, the top of the stack is examined. If it is a binary
11777 * operator, the item before it should be an operand, and both are replaced
11778 * by the result of doing that operation on the new operand and the one on
11779 * the stack. Thus a sequence of binary operands is reduced to a single
11780 * one before the next one is parsed.
11782 * A unary operator may immediately follow a binary in the input, for
11785 * When an operand is parsed and the top of the stack is a unary operator,
11786 * the operation is performed, and then the stack is rechecked to see if
11787 * this new operand is part of a binary operation; if so, it is handled as
11790 * A '(' is simply pushed on the stack; it is valid only if the stack is
11791 * empty, or the top element of the stack is an operator or another '('
11792 * (for which the parenthesized expression will become an operand). By the
11793 * time the corresponding ')' is parsed everything in between should have
11794 * been parsed and evaluated to a single operand (or else is a syntax
11795 * error), and is handled as a regular operand */
11797 sv_2mortal((SV *)(stack = newAV()));
11799 while (RExC_parse < RExC_end) {
11800 I32 top_index = av_tindex(stack);
11802 SV* current = NULL;
11804 /* Skip white space */
11805 RExC_parse = regpatws(pRExC_state, RExC_parse,
11806 TRUE); /* means recognize comments */
11807 if (RExC_parse >= RExC_end) {
11808 Perl_croak(aTHX_ "panic: Read past end of '(?[ ])'");
11810 if ((curchar = UCHARAT(RExC_parse)) == ']') {
11817 if (av_tindex(stack) >= 0 /* This makes sure that we can
11818 safely subtract 1 from
11819 RExC_parse in the next clause.
11820 If we have something on the
11821 stack, we have parsed something
11823 && UCHARAT(RExC_parse - 1) == '('
11824 && RExC_parse < RExC_end)
11826 /* If is a '(?', could be an embedded '(?flags:(?[...])'.
11827 * This happens when we have some thing like
11829 * my $thai_or_lao = qr/(?[ \p{Thai} + \p{Lao} ])/;
11831 * qr/(?[ \p{Digit} & $thai_or_lao ])/;
11833 * Here we would be handling the interpolated
11834 * '$thai_or_lao'. We handle this by a recursive call to
11835 * ourselves which returns the inversion list the
11836 * interpolated expression evaluates to. We use the flags
11837 * from the interpolated pattern. */
11838 U32 save_flags = RExC_flags;
11839 const char * const save_parse = ++RExC_parse;
11841 parse_lparen_question_flags(pRExC_state);
11843 if (RExC_parse == save_parse /* Makes sure there was at
11844 least one flag (or this
11845 embedding wasn't compiled)
11847 || RExC_parse >= RExC_end - 4
11848 || UCHARAT(RExC_parse) != ':'
11849 || UCHARAT(++RExC_parse) != '('
11850 || UCHARAT(++RExC_parse) != '?'
11851 || UCHARAT(++RExC_parse) != '[')
11854 /* In combination with the above, this moves the
11855 * pointer to the point just after the first erroneous
11856 * character (or if there are no flags, to where they
11857 * should have been) */
11858 if (RExC_parse >= RExC_end - 4) {
11859 RExC_parse = RExC_end;
11861 else if (RExC_parse != save_parse) {
11862 RExC_parse += (UTF) ? UTF8SKIP(RExC_parse) : 1;
11864 vFAIL("Expecting '(?flags:(?[...'");
11867 (void) handle_regex_sets(pRExC_state, ¤t, flagp,
11868 depth+1, oregcomp_parse);
11870 /* Here, 'current' contains the embedded expression's
11871 * inversion list, and RExC_parse points to the trailing
11872 * ']'; the next character should be the ')' which will be
11873 * paired with the '(' that has been put on the stack, so
11874 * the whole embedded expression reduces to '(operand)' */
11877 RExC_flags = save_flags;
11878 goto handle_operand;
11883 RExC_parse += (UTF) ? UTF8SKIP(RExC_parse) : 1;
11884 vFAIL("Unexpected character");
11887 /* regclass() can only return RESTART_UTF8 if multi-char
11888 folds are allowed. */
11889 if (!regclass(pRExC_state, flagp,depth+1,
11890 TRUE, /* means parse just the next thing */
11891 FALSE, /* don't allow multi-char folds */
11892 FALSE, /* don't silence non-portable warnings. */
11894 FAIL2("panic: regclass returned NULL to handle_sets, flags=%#"UVxf"",
11896 /* regclass() will return with parsing just the \ sequence,
11897 * leaving the parse pointer at the next thing to parse */
11899 goto handle_operand;
11901 case '[': /* Is a bracketed character class */
11903 bool is_posix_class = could_it_be_a_POSIX_class(pRExC_state);
11905 if (! is_posix_class) {
11909 /* regclass() can only return RESTART_UTF8 if multi-char
11910 folds are allowed. */
11911 if(!regclass(pRExC_state, flagp,depth+1,
11912 is_posix_class, /* parse the whole char class
11913 only if not a posix class */
11914 FALSE, /* don't allow multi-char folds */
11915 FALSE, /* don't silence non-portable warnings. */
11917 FAIL2("panic: regclass returned NULL to handle_sets, flags=%#"UVxf"",
11919 /* function call leaves parse pointing to the ']', except if we
11921 if (is_posix_class) {
11925 goto handle_operand;
11934 || ( ! (top_ptr = av_fetch(stack, top_index, FALSE)))
11935 || ! IS_OPERAND(*top_ptr))
11938 vFAIL2("Unexpected binary operator '%c' with no preceding operand", curchar);
11940 av_push(stack, newSVuv(curchar));
11944 av_push(stack, newSVuv(curchar));
11948 if (top_index >= 0) {
11949 top_ptr = av_fetch(stack, top_index, FALSE);
11951 if (IS_OPERAND(*top_ptr)) {
11953 vFAIL("Unexpected '(' with no preceding operator");
11956 av_push(stack, newSVuv(curchar));
11963 || ! (current = av_pop(stack))
11964 || ! IS_OPERAND(current)
11965 || ! (lparen = av_pop(stack))
11966 || IS_OPERAND(lparen)
11967 || SvUV(lparen) != '(')
11969 SvREFCNT_dec(current);
11971 vFAIL("Unexpected ')'");
11974 SvREFCNT_dec_NN(lparen);
11981 /* Here, we have an operand to process, in 'current' */
11983 if (top_index < 0) { /* Just push if stack is empty */
11984 av_push(stack, current);
11987 SV* top = av_pop(stack);
11989 char current_operator;
11991 if (IS_OPERAND(top)) {
11992 SvREFCNT_dec_NN(top);
11993 SvREFCNT_dec_NN(current);
11994 vFAIL("Operand with no preceding operator");
11996 current_operator = (char) SvUV(top);
11997 switch (current_operator) {
11998 case '(': /* Push the '(' back on followed by the new
12000 av_push(stack, top);
12001 av_push(stack, current);
12002 SvREFCNT_inc(top); /* Counters the '_dec' done
12003 just after the 'break', so
12004 it doesn't get wrongly freed
12009 _invlist_invert(current);
12011 /* Unlike binary operators, the top of the stack,
12012 * now that this unary one has been popped off, may
12013 * legally be an operator, and we now have operand
12016 SvREFCNT_dec_NN(top);
12017 goto handle_operand;
12020 prev = av_pop(stack);
12021 _invlist_intersection(prev,
12024 av_push(stack, current);
12029 prev = av_pop(stack);
12030 _invlist_union(prev, current, ¤t);
12031 av_push(stack, current);
12035 prev = av_pop(stack);;
12036 _invlist_subtract(prev, current, ¤t);
12037 av_push(stack, current);
12040 case '^': /* The union minus the intersection */
12046 prev = av_pop(stack);
12047 _invlist_union(prev, current, &u);
12048 _invlist_intersection(prev, current, &i);
12049 /* _invlist_subtract will overwrite current
12050 without freeing what it already contains */
12052 _invlist_subtract(u, i, ¤t);
12053 av_push(stack, current);
12054 SvREFCNT_dec_NN(i);
12055 SvREFCNT_dec_NN(u);
12056 SvREFCNT_dec_NN(element);
12061 Perl_croak(aTHX_ "panic: Unexpected item on '(?[ ])' stack");
12063 SvREFCNT_dec_NN(top);
12064 SvREFCNT_dec(prev);
12068 RExC_parse += (UTF) ? UTF8SKIP(RExC_parse) : 1;
12071 if (av_tindex(stack) < 0 /* Was empty */
12072 || ((final = av_pop(stack)) == NULL)
12073 || ! IS_OPERAND(final)
12074 || av_tindex(stack) >= 0) /* More left on stack */
12076 vFAIL("Incomplete expression within '(?[ ])'");
12079 /* Here, 'final' is the resultant inversion list from evaluating the
12080 * expression. Return it if so requested */
12081 if (return_invlist) {
12082 *return_invlist = final;
12086 /* Otherwise generate a resultant node, based on 'final'. regclass() is
12087 * expecting a string of ranges and individual code points */
12088 invlist_iterinit(final);
12089 result_string = newSVpvs("");
12090 while (invlist_iternext(final, &start, &end)) {
12091 if (start == end) {
12092 Perl_sv_catpvf(aTHX_ result_string, "\\x{%"UVXf"}", start);
12095 Perl_sv_catpvf(aTHX_ result_string, "\\x{%"UVXf"}-\\x{%"UVXf"}",
12100 save_parse = RExC_parse;
12101 RExC_parse = SvPV(result_string, len);
12102 save_end = RExC_end;
12103 RExC_end = RExC_parse + len;
12105 /* We turn off folding around the call, as the class we have constructed
12106 * already has all folding taken into consideration, and we don't want
12107 * regclass() to add to that */
12108 RExC_flags &= ~RXf_PMf_FOLD;
12109 /* regclass() can only return RESTART_UTF8 if multi-char folds are allowed.
12111 node = regclass(pRExC_state, flagp,depth+1,
12112 FALSE, /* means parse the whole char class */
12113 FALSE, /* don't allow multi-char folds */
12114 TRUE, /* silence non-portable warnings. The above may very
12115 well have generated non-portable code points, but
12116 they're valid on this machine */
12119 FAIL2("panic: regclass returned NULL to handle_sets, flags=%#"UVxf,
12122 RExC_flags |= RXf_PMf_FOLD;
12124 RExC_parse = save_parse + 1;
12125 RExC_end = save_end;
12126 SvREFCNT_dec_NN(final);
12127 SvREFCNT_dec_NN(result_string);
12129 nextchar(pRExC_state);
12130 Set_Node_Length(node, RExC_parse - oregcomp_parse + 1); /* MJD */
12135 /* The names of properties whose definitions are not known at compile time are
12136 * stored in this SV, after a constant heading. So if the length has been
12137 * changed since initialization, then there is a run-time definition. */
12138 #define HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION (SvCUR(listsv) != initial_listsv_len)
12141 S_regclass(pTHX_ RExC_state_t *pRExC_state, I32 *flagp, U32 depth,
12142 const bool stop_at_1, /* Just parse the next thing, don't
12143 look for a full character class */
12144 bool allow_multi_folds,
12145 const bool silence_non_portable, /* Don't output warnings
12148 SV** ret_invlist) /* Return an inversion list, not a node */
12150 /* parse a bracketed class specification. Most of these will produce an
12151 * ANYOF node; but something like [a] will produce an EXACT node; [aA], an
12152 * EXACTFish node; [[:ascii:]], a POSIXA node; etc. It is more complex
12153 * under /i with multi-character folds: it will be rewritten following the
12154 * paradigm of this example, where the <multi-fold>s are characters which
12155 * fold to multiple character sequences:
12156 * /[abc\x{multi-fold1}def\x{multi-fold2}ghi]/i
12157 * gets effectively rewritten as:
12158 * /(?:\x{multi-fold1}|\x{multi-fold2}|[abcdefghi]/i
12159 * reg() gets called (recursively) on the rewritten version, and this
12160 * function will return what it constructs. (Actually the <multi-fold>s
12161 * aren't physically removed from the [abcdefghi], it's just that they are
12162 * ignored in the recursion by means of a flag:
12163 * <RExC_in_multi_char_class>.)
12165 * ANYOF nodes contain a bit map for the first 256 characters, with the
12166 * corresponding bit set if that character is in the list. For characters
12167 * above 255, a range list or swash is used. There are extra bits for \w,
12168 * etc. in locale ANYOFs, as what these match is not determinable at
12171 * Returns NULL, setting *flagp to RESTART_UTF8 if the sizing scan needs
12172 * to be restarted. This can only happen if ret_invlist is non-NULL.
12176 UV prevvalue = OOB_UNICODE, save_prevvalue = OOB_UNICODE;
12178 UV value = OOB_UNICODE, save_value = OOB_UNICODE;
12181 IV namedclass = OOB_NAMEDCLASS;
12182 char *rangebegin = NULL;
12183 bool need_class = 0;
12185 STRLEN initial_listsv_len = 0; /* Kind of a kludge to see if it is more
12186 than just initialized. */
12187 SV* properties = NULL; /* Code points that match \p{} \P{} */
12188 SV* posixes = NULL; /* Code points that match classes like, [:word:],
12189 extended beyond the Latin1 range */
12190 UV element_count = 0; /* Number of distinct elements in the class.
12191 Optimizations may be possible if this is tiny */
12192 AV * multi_char_matches = NULL; /* Code points that fold to more than one
12193 character; used under /i */
12195 char * stop_ptr = RExC_end; /* where to stop parsing */
12196 const bool skip_white = cBOOL(ret_invlist); /* ignore unescaped white
12198 const bool strict = cBOOL(ret_invlist); /* Apply strict parsing rules? */
12200 /* Unicode properties are stored in a swash; this holds the current one
12201 * being parsed. If this swash is the only above-latin1 component of the
12202 * character class, an optimization is to pass it directly on to the
12203 * execution engine. Otherwise, it is set to NULL to indicate that there
12204 * are other things in the class that have to be dealt with at execution
12206 SV* swash = NULL; /* Code points that match \p{} \P{} */
12208 /* Set if a component of this character class is user-defined; just passed
12209 * on to the engine */
12210 bool has_user_defined_property = FALSE;
12212 /* inversion list of code points this node matches only when the target
12213 * string is in UTF-8. (Because is under /d) */
12214 SV* depends_list = NULL;
12216 /* inversion list of code points this node matches. For much of the
12217 * function, it includes only those that match regardless of the utf8ness
12218 * of the target string */
12219 SV* cp_list = NULL;
12222 /* In a range, counts how many 0-2 of the ends of it came from literals,
12223 * not escapes. Thus we can tell if 'A' was input vs \x{C1} */
12224 UV literal_endpoint = 0;
12226 bool invert = FALSE; /* Is this class to be complemented */
12228 /* Is there any thing like \W or [:^digit:] that matches above the legal
12229 * Unicode range? */
12230 bool runtime_posix_matches_above_Unicode = FALSE;
12232 regnode * const orig_emit = RExC_emit; /* Save the original RExC_emit in
12233 case we need to change the emitted regop to an EXACT. */
12234 const char * orig_parse = RExC_parse;
12235 const I32 orig_size = RExC_size;
12236 GET_RE_DEBUG_FLAGS_DECL;
12238 PERL_ARGS_ASSERT_REGCLASS;
12240 PERL_UNUSED_ARG(depth);
12243 DEBUG_PARSE("clas");
12245 /* Assume we are going to generate an ANYOF node. */
12246 ret = reganode(pRExC_state, ANYOF, 0);
12249 RExC_size += ANYOF_SKIP;
12250 listsv = &PL_sv_undef; /* For code scanners: listsv always non-NULL. */
12253 ANYOF_FLAGS(ret) = 0;
12255 RExC_emit += ANYOF_SKIP;
12257 ANYOF_FLAGS(ret) |= ANYOF_LOCALE;
12259 listsv = newSVpvs_flags("# comment\n", SVs_TEMP);
12260 initial_listsv_len = SvCUR(listsv);
12261 SvTEMP_off(listsv); /* Grr, TEMPs and mortals are conflated. */
12265 RExC_parse = regpatws(pRExC_state, RExC_parse,
12266 FALSE /* means don't recognize comments */);
12269 if (UCHARAT(RExC_parse) == '^') { /* Complement of range. */
12272 allow_multi_folds = FALSE;
12275 RExC_parse = regpatws(pRExC_state, RExC_parse,
12276 FALSE /* means don't recognize comments */);
12280 /* Check that they didn't say [:posix:] instead of [[:posix:]] */
12281 if (!SIZE_ONLY && RExC_parse < RExC_end && POSIXCC(UCHARAT(RExC_parse))) {
12282 const char *s = RExC_parse;
12283 const char c = *s++;
12285 while (isWORDCHAR(*s))
12287 if (*s && c == *s && s[1] == ']') {
12288 SAVEFREESV(RExC_rx_sv);
12290 "POSIX syntax [%c %c] belongs inside character classes",
12292 (void)ReREFCNT_inc(RExC_rx_sv);
12296 /* If the caller wants us to just parse a single element, accomplish this
12297 * by faking the loop ending condition */
12298 if (stop_at_1 && RExC_end > RExC_parse) {
12299 stop_ptr = RExC_parse + 1;
12302 /* allow 1st char to be ']' (allowing it to be '-' is dealt with later) */
12303 if (UCHARAT(RExC_parse) == ']')
12304 goto charclassloop;
12308 if (RExC_parse >= stop_ptr) {
12313 RExC_parse = regpatws(pRExC_state, RExC_parse,
12314 FALSE /* means don't recognize comments */);
12317 if (UCHARAT(RExC_parse) == ']') {
12323 namedclass = OOB_NAMEDCLASS; /* initialize as illegal */
12324 save_value = value;
12325 save_prevvalue = prevvalue;
12328 rangebegin = RExC_parse;
12332 value = utf8n_to_uvchr((U8*)RExC_parse,
12333 RExC_end - RExC_parse,
12334 &numlen, UTF8_ALLOW_DEFAULT);
12335 RExC_parse += numlen;
12338 value = UCHARAT(RExC_parse++);
12341 && RExC_parse < RExC_end
12342 && POSIXCC(UCHARAT(RExC_parse)))
12344 namedclass = regpposixcc(pRExC_state, value, strict);
12346 else if (value == '\\') {
12348 value = utf8n_to_uvchr((U8*)RExC_parse,
12349 RExC_end - RExC_parse,
12350 &numlen, UTF8_ALLOW_DEFAULT);
12351 RExC_parse += numlen;
12354 value = UCHARAT(RExC_parse++);
12356 /* Some compilers cannot handle switching on 64-bit integer
12357 * values, therefore value cannot be an UV. Yes, this will
12358 * be a problem later if we want switch on Unicode.
12359 * A similar issue a little bit later when switching on
12360 * namedclass. --jhi */
12362 /* If the \ is escaping white space when white space is being
12363 * skipped, it means that that white space is wanted literally, and
12364 * is already in 'value'. Otherwise, need to translate the escape
12365 * into what it signifies. */
12366 if (! skip_white || ! is_PATWS_cp(value)) switch ((I32)value) {
12368 case 'w': namedclass = ANYOF_WORDCHAR; break;
12369 case 'W': namedclass = ANYOF_NWORDCHAR; break;
12370 case 's': namedclass = ANYOF_SPACE; break;
12371 case 'S': namedclass = ANYOF_NSPACE; break;
12372 case 'd': namedclass = ANYOF_DIGIT; break;
12373 case 'D': namedclass = ANYOF_NDIGIT; break;
12374 case 'v': namedclass = ANYOF_VERTWS; break;
12375 case 'V': namedclass = ANYOF_NVERTWS; break;
12376 case 'h': namedclass = ANYOF_HORIZWS; break;
12377 case 'H': namedclass = ANYOF_NHORIZWS; break;
12378 case 'N': /* Handle \N{NAME} in class */
12380 /* We only pay attention to the first char of
12381 multichar strings being returned. I kinda wonder
12382 if this makes sense as it does change the behaviour
12383 from earlier versions, OTOH that behaviour was broken
12385 if (! grok_bslash_N(pRExC_state, NULL, &value, flagp, depth,
12386 TRUE, /* => charclass */
12389 if (*flagp & RESTART_UTF8)
12390 FAIL("panic: grok_bslash_N set RESTART_UTF8");
12400 /* We will handle any undefined properties ourselves */
12401 U8 swash_init_flags = _CORE_SWASH_INIT_RETURN_IF_UNDEF;
12403 if (RExC_parse >= RExC_end)
12404 vFAIL2("Empty \\%c{}", (U8)value);
12405 if (*RExC_parse == '{') {
12406 const U8 c = (U8)value;
12407 e = strchr(RExC_parse++, '}');
12409 vFAIL2("Missing right brace on \\%c{}", c);
12410 while (isSPACE(UCHARAT(RExC_parse)))
12412 if (e == RExC_parse)
12413 vFAIL2("Empty \\%c{}", c);
12414 n = e - RExC_parse;
12415 while (isSPACE(UCHARAT(RExC_parse + n - 1)))
12426 if (UCHARAT(RExC_parse) == '^') {
12429 /* toggle. (The rhs xor gets the single bit that
12430 * differs between P and p; the other xor inverts just
12432 value ^= 'P' ^ 'p';
12434 while (isSPACE(UCHARAT(RExC_parse))) {
12439 /* Try to get the definition of the property into
12440 * <invlist>. If /i is in effect, the effective property
12441 * will have its name be <__NAME_i>. The design is
12442 * discussed in commit
12443 * 2f833f5208e26b208886e51e09e2c072b5eabb46 */
12444 Newx(name, n + sizeof("_i__\n"), char);
12446 sprintf(name, "%s%.*s%s\n",
12447 (FOLD) ? "__" : "",
12453 /* Look up the property name, and get its swash and
12454 * inversion list, if the property is found */
12456 SvREFCNT_dec_NN(swash);
12458 swash = _core_swash_init("utf8", name, &PL_sv_undef,
12461 NULL, /* No inversion list */
12464 if (! swash || ! (invlist = _get_swash_invlist(swash))) {
12466 SvREFCNT_dec_NN(swash);
12470 /* Here didn't find it. It could be a user-defined
12471 * property that will be available at run-time. If we
12472 * accept only compile-time properties, is an error;
12473 * otherwise add it to the list for run-time look up */
12475 RExC_parse = e + 1;
12476 vFAIL3("Property '%.*s' is unknown", (int) n, name);
12478 Perl_sv_catpvf(aTHX_ listsv, "%cutf8::%s\n",
12479 (value == 'p' ? '+' : '!'),
12481 has_user_defined_property = TRUE;
12483 /* We don't know yet, so have to assume that the
12484 * property could match something in the Latin1 range,
12485 * hence something that isn't utf8. Note that this
12486 * would cause things in <depends_list> to match
12487 * inappropriately, except that any \p{}, including
12488 * this one forces Unicode semantics, which means there
12489 * is <no depends_list> */
12490 ANYOF_FLAGS(ret) |= ANYOF_NONBITMAP_NON_UTF8;
12494 /* Here, did get the swash and its inversion list. If
12495 * the swash is from a user-defined property, then this
12496 * whole character class should be regarded as such */
12497 has_user_defined_property =
12499 & _CORE_SWASH_INIT_USER_DEFINED_PROPERTY);
12501 /* Invert if asking for the complement */
12502 if (value == 'P') {
12503 _invlist_union_complement_2nd(properties,
12507 /* The swash can't be used as-is, because we've
12508 * inverted things; delay removing it to here after
12509 * have copied its invlist above */
12510 SvREFCNT_dec_NN(swash);
12514 _invlist_union(properties, invlist, &properties);
12519 RExC_parse = e + 1;
12520 namedclass = ANYOF_UNIPROP; /* no official name, but it's
12523 /* \p means they want Unicode semantics */
12524 RExC_uni_semantics = 1;
12527 case 'n': value = '\n'; break;
12528 case 'r': value = '\r'; break;
12529 case 't': value = '\t'; break;
12530 case 'f': value = '\f'; break;
12531 case 'b': value = '\b'; break;
12532 case 'e': value = ASCII_TO_NATIVE('\033');break;
12533 case 'a': value = ASCII_TO_NATIVE('\007');break;
12535 RExC_parse--; /* function expects to be pointed at the 'o' */
12537 const char* error_msg;
12538 bool valid = grok_bslash_o(&RExC_parse,
12541 SIZE_ONLY, /* warnings in pass
12544 silence_non_portable,
12550 if (PL_encoding && value < 0x100) {
12551 goto recode_encoding;
12555 RExC_parse--; /* function expects to be pointed at the 'x' */
12557 const char* error_msg;
12558 bool valid = grok_bslash_x(&RExC_parse,
12561 TRUE, /* Output warnings */
12563 silence_non_portable,
12569 if (PL_encoding && value < 0x100)
12570 goto recode_encoding;
12573 value = grok_bslash_c(*RExC_parse++, UTF, SIZE_ONLY);
12575 case '0': case '1': case '2': case '3': case '4':
12576 case '5': case '6': case '7':
12578 /* Take 1-3 octal digits */
12579 I32 flags = PERL_SCAN_SILENT_ILLDIGIT;
12580 numlen = (strict) ? 4 : 3;
12581 value = grok_oct(--RExC_parse, &numlen, &flags, NULL);
12582 RExC_parse += numlen;
12585 RExC_parse += (UTF) ? UTF8SKIP(RExC_parse) : 1;
12586 vFAIL("Need exactly 3 octal digits");
12588 else if (! SIZE_ONLY /* like \08, \178 */
12590 && RExC_parse < RExC_end
12591 && isDIGIT(*RExC_parse)
12592 && ckWARN(WARN_REGEXP))
12594 SAVEFREESV(RExC_rx_sv);
12595 reg_warn_non_literal_string(
12597 form_short_octal_warning(RExC_parse, numlen));
12598 (void)ReREFCNT_inc(RExC_rx_sv);
12601 if (PL_encoding && value < 0x100)
12602 goto recode_encoding;
12606 if (! RExC_override_recoding) {
12607 SV* enc = PL_encoding;
12608 value = reg_recode((const char)(U8)value, &enc);
12611 vFAIL("Invalid escape in the specified encoding");
12613 else if (SIZE_ONLY) {
12614 ckWARNreg(RExC_parse,
12615 "Invalid escape in the specified encoding");
12621 /* Allow \_ to not give an error */
12622 if (!SIZE_ONLY && isWORDCHAR(value) && value != '_') {
12624 vFAIL2("Unrecognized escape \\%c in character class",
12628 SAVEFREESV(RExC_rx_sv);
12629 ckWARN2reg(RExC_parse,
12630 "Unrecognized escape \\%c in character class passed through",
12632 (void)ReREFCNT_inc(RExC_rx_sv);
12636 } /* End of switch on char following backslash */
12637 } /* end of handling backslash escape sequences */
12640 literal_endpoint++;
12643 /* Here, we have the current token in 'value' */
12645 /* What matches in a locale is not known until runtime. This includes
12646 * what the Posix classes (like \w, [:space:]) match. Room must be
12647 * reserved (one time per class) to store such classes, either if Perl
12648 * is compiled so that locale nodes always should have this space, or
12649 * if there is such class info to be stored. The space will contain a
12650 * bit for each named class that is to be matched against. This isn't
12651 * needed for \p{} and pseudo-classes, as they are not affected by
12652 * locale, and hence are dealt with separately */
12655 && (ANYOF_LOCALE == ANYOF_CLASS
12656 || (namedclass > OOB_NAMEDCLASS && namedclass < ANYOF_MAX)))
12660 RExC_size += ANYOF_CLASS_SKIP - ANYOF_SKIP;
12663 RExC_emit += ANYOF_CLASS_SKIP - ANYOF_SKIP;
12664 ANYOF_CLASS_ZERO(ret);
12666 ANYOF_FLAGS(ret) |= ANYOF_CLASS;
12669 if (namedclass > OOB_NAMEDCLASS) { /* this is a named class \blah */
12671 /* a bad range like a-\d, a-[:digit:]. The '-' is taken as a
12672 * literal, as is the character that began the false range, i.e.
12673 * the 'a' in the examples */
12676 const int w = (RExC_parse >= rangebegin)
12677 ? RExC_parse - rangebegin
12680 vFAIL4("False [] range \"%*.*s\"", w, w, rangebegin);
12683 SAVEFREESV(RExC_rx_sv); /* in case of fatal warnings */
12684 ckWARN4reg(RExC_parse,
12685 "False [] range \"%*.*s\"",
12687 (void)ReREFCNT_inc(RExC_rx_sv);
12688 cp_list = add_cp_to_invlist(cp_list, '-');
12689 cp_list = add_cp_to_invlist(cp_list, prevvalue);
12693 range = 0; /* this was not a true range */
12694 element_count += 2; /* So counts for three values */
12698 U8 classnum = namedclass_to_classnum(namedclass);
12699 if (namedclass >= ANYOF_MAX) { /* If a special class */
12700 if (namedclass != ANYOF_UNIPROP) { /* UNIPROP = \p and \P */
12702 /* Here, should be \h, \H, \v, or \V. Neither /d nor
12703 * /l make a difference in what these match. There
12704 * would be problems if these characters had folds
12705 * other than themselves, as cp_list is subject to
12707 if (classnum != _CC_VERTSPACE) {
12708 assert( namedclass == ANYOF_HORIZWS
12709 || namedclass == ANYOF_NHORIZWS);
12711 /* It turns out that \h is just a synonym for
12713 classnum = _CC_BLANK;
12716 _invlist_union_maybe_complement_2nd(
12718 PL_XPosix_ptrs[classnum],
12719 cBOOL(namedclass % 2), /* Complement if odd
12720 (NHORIZWS, NVERTWS)
12725 else if (classnum == _CC_ASCII) {
12728 ANYOF_CLASS_SET(ret, namedclass);
12731 #endif /* Not isascii(); just use the hard-coded definition for it */
12732 _invlist_union_maybe_complement_2nd(
12735 cBOOL(namedclass % 2), /* Complement if odd
12739 else { /* Garden variety class */
12741 /* The ascii range inversion list */
12742 SV* ascii_source = PL_Posix_ptrs[classnum];
12744 /* The full Latin1 range inversion list */
12745 SV* l1_source = PL_L1Posix_ptrs[classnum];
12747 /* This code is structured into two major clauses. The
12748 * first is for classes whose complete definitions may not
12749 * already be known. It not, the Latin1 definition
12750 * (guaranteed to already known) is used plus code is
12751 * generated to load the rest at run-time (only if needed).
12752 * If the complete definition is known, it drops down to
12753 * the second clause, where the complete definition is
12756 if (classnum < _FIRST_NON_SWASH_CC) {
12758 /* Here, the class has a swash, which may or not
12759 * already be loaded */
12761 /* The name of the property to use to match the full
12762 * eXtended Unicode range swash for this character
12764 const char *Xname = swash_property_names[classnum];
12766 /* If returning the inversion list, we can't defer
12767 * getting this until runtime */
12768 if (ret_invlist && ! PL_utf8_swash_ptrs[classnum]) {
12769 PL_utf8_swash_ptrs[classnum] =
12770 _core_swash_init("utf8", Xname, &PL_sv_undef,
12773 NULL, /* No inversion list */
12774 NULL /* No flags */
12776 assert(PL_utf8_swash_ptrs[classnum]);
12778 if ( ! PL_utf8_swash_ptrs[classnum]) {
12779 if (namedclass % 2 == 0) { /* A non-complemented
12781 /* If not /a matching, there are code points we
12782 * don't know at compile time. Arrange for the
12783 * unknown matches to be loaded at run-time, if
12785 if (! AT_LEAST_ASCII_RESTRICTED) {
12786 Perl_sv_catpvf(aTHX_ listsv, "+utf8::%s\n",
12789 if (LOC) { /* Under locale, set run-time
12791 ANYOF_CLASS_SET(ret, namedclass);
12794 /* Add the current class's code points to
12795 * the running total */
12796 _invlist_union(posixes,
12797 (AT_LEAST_ASCII_RESTRICTED)
12803 else { /* A complemented class */
12804 if (AT_LEAST_ASCII_RESTRICTED) {
12805 /* Under /a should match everything above
12806 * ASCII, plus the complement of the set's
12808 _invlist_union_complement_2nd(posixes,
12813 /* Arrange for the unknown matches to be
12814 * loaded at run-time, if needed */
12815 Perl_sv_catpvf(aTHX_ listsv, "!utf8::%s\n",
12817 runtime_posix_matches_above_Unicode = TRUE;
12819 ANYOF_CLASS_SET(ret, namedclass);
12823 /* We want to match everything in
12824 * Latin1, except those things that
12825 * l1_source matches */
12826 SV* scratch_list = NULL;
12827 _invlist_subtract(PL_Latin1, l1_source,
12830 /* Add the list from this class to the
12833 posixes = scratch_list;
12836 _invlist_union(posixes,
12839 SvREFCNT_dec_NN(scratch_list);
12841 if (DEPENDS_SEMANTICS) {
12843 |= ANYOF_NON_UTF8_LATIN1_ALL;
12848 goto namedclass_done;
12851 /* Here, there is a swash loaded for the class. If no
12852 * inversion list for it yet, get it */
12853 if (! PL_XPosix_ptrs[classnum]) {
12854 PL_XPosix_ptrs[classnum]
12855 = _swash_to_invlist(PL_utf8_swash_ptrs[classnum]);
12859 /* Here there is an inversion list already loaded for the
12862 if (namedclass % 2 == 0) { /* A non-complemented class,
12863 like ANYOF_PUNCT */
12865 /* For non-locale, just add it to any existing list
12867 _invlist_union(posixes,
12868 (AT_LEAST_ASCII_RESTRICTED)
12870 : PL_XPosix_ptrs[classnum],
12873 else { /* Locale */
12874 SV* scratch_list = NULL;
12876 /* For above Latin1 code points, we use the full
12878 _invlist_intersection(PL_AboveLatin1,
12879 PL_XPosix_ptrs[classnum],
12881 /* And set the output to it, adding instead if
12882 * there already is an output. Checking if
12883 * 'posixes' is NULL first saves an extra clone.
12884 * Its reference count will be decremented at the
12885 * next union, etc, or if this is the only
12886 * instance, at the end of the routine */
12888 posixes = scratch_list;
12891 _invlist_union(posixes, scratch_list, &posixes);
12892 SvREFCNT_dec_NN(scratch_list);
12895 #ifndef HAS_ISBLANK
12896 if (namedclass != ANYOF_BLANK) {
12898 /* Set this class in the node for runtime
12900 ANYOF_CLASS_SET(ret, namedclass);
12901 #ifndef HAS_ISBLANK
12904 /* No isblank(), use the hard-coded ASCII-range
12905 * blanks, adding them to the running total. */
12907 _invlist_union(posixes, ascii_source, &posixes);
12912 else { /* A complemented class, like ANYOF_NPUNCT */
12914 _invlist_union_complement_2nd(
12916 (AT_LEAST_ASCII_RESTRICTED)
12918 : PL_XPosix_ptrs[classnum],
12920 /* Under /d, everything in the upper half of the
12921 * Latin1 range matches this complement */
12922 if (DEPENDS_SEMANTICS) {
12923 ANYOF_FLAGS(ret) |= ANYOF_NON_UTF8_LATIN1_ALL;
12926 else { /* Locale */
12927 SV* scratch_list = NULL;
12928 _invlist_subtract(PL_AboveLatin1,
12929 PL_XPosix_ptrs[classnum],
12932 posixes = scratch_list;
12935 _invlist_union(posixes, scratch_list, &posixes);
12936 SvREFCNT_dec_NN(scratch_list);
12938 #ifndef HAS_ISBLANK
12939 if (namedclass != ANYOF_NBLANK) {
12941 ANYOF_CLASS_SET(ret, namedclass);
12942 #ifndef HAS_ISBLANK
12945 /* Get the list of all code points in Latin1
12946 * that are not ASCII blanks, and add them to
12947 * the running total */
12948 _invlist_subtract(PL_Latin1, ascii_source,
12950 _invlist_union(posixes, scratch_list, &posixes);
12951 SvREFCNT_dec_NN(scratch_list);
12958 continue; /* Go get next character */
12960 } /* end of namedclass \blah */
12962 /* Here, we have a single value. If 'range' is set, it is the ending
12963 * of a range--check its validity. Later, we will handle each
12964 * individual code point in the range. If 'range' isn't set, this
12965 * could be the beginning of a range, so check for that by looking
12966 * ahead to see if the next real character to be processed is the range
12967 * indicator--the minus sign */
12970 RExC_parse = regpatws(pRExC_state, RExC_parse,
12971 FALSE /* means don't recognize comments */);
12975 if (prevvalue > value) /* b-a */ {
12976 const int w = RExC_parse - rangebegin;
12977 Simple_vFAIL4("Invalid [] range \"%*.*s\"", w, w, rangebegin);
12978 range = 0; /* not a valid range */
12982 prevvalue = value; /* save the beginning of the potential range */
12983 if (! stop_at_1 /* Can't be a range if parsing just one thing */
12984 && *RExC_parse == '-')
12986 char* next_char_ptr = RExC_parse + 1;
12987 if (skip_white) { /* Get the next real char after the '-' */
12988 next_char_ptr = regpatws(pRExC_state,
12990 FALSE); /* means don't recognize
12994 /* If the '-' is at the end of the class (just before the ']',
12995 * it is a literal minus; otherwise it is a range */
12996 if (next_char_ptr < RExC_end && *next_char_ptr != ']') {
12997 RExC_parse = next_char_ptr;
12999 /* a bad range like \w-, [:word:]- ? */
13000 if (namedclass > OOB_NAMEDCLASS) {
13001 if (strict || ckWARN(WARN_REGEXP)) {
13003 RExC_parse >= rangebegin ?
13004 RExC_parse - rangebegin : 0;
13006 vFAIL4("False [] range \"%*.*s\"",
13011 "False [] range \"%*.*s\"",
13016 cp_list = add_cp_to_invlist(cp_list, '-');
13020 range = 1; /* yeah, it's a range! */
13021 continue; /* but do it the next time */
13026 /* Here, <prevvalue> is the beginning of the range, if any; or <value>
13029 /* non-Latin1 code point implies unicode semantics. Must be set in
13030 * pass1 so is there for the whole of pass 2 */
13032 RExC_uni_semantics = 1;
13035 /* Ready to process either the single value, or the completed range.
13036 * For single-valued non-inverted ranges, we consider the possibility
13037 * of multi-char folds. (We made a conscious decision to not do this
13038 * for the other cases because it can often lead to non-intuitive
13039 * results. For example, you have the peculiar case that:
13040 * "s s" =~ /^[^\xDF]+$/i => Y
13041 * "ss" =~ /^[^\xDF]+$/i => N
13043 * See [perl #89750] */
13044 if (FOLD && allow_multi_folds && value == prevvalue) {
13045 if (value == LATIN_SMALL_LETTER_SHARP_S
13046 || (value > 255 && _invlist_contains_cp(PL_HasMultiCharFold,
13049 /* Here <value> is indeed a multi-char fold. Get what it is */
13051 U8 foldbuf[UTF8_MAXBYTES_CASE];
13054 UV folded = _to_uni_fold_flags(
13059 | ((LOC) ? FOLD_FLAGS_LOCALE
13060 : (ASCII_FOLD_RESTRICTED)
13061 ? FOLD_FLAGS_NOMIX_ASCII
13065 /* Here, <folded> should be the first character of the
13066 * multi-char fold of <value>, with <foldbuf> containing the
13067 * whole thing. But, if this fold is not allowed (because of
13068 * the flags), <fold> will be the same as <value>, and should
13069 * be processed like any other character, so skip the special
13071 if (folded != value) {
13073 /* Skip if we are recursed, currently parsing the class
13074 * again. Otherwise add this character to the list of
13075 * multi-char folds. */
13076 if (! RExC_in_multi_char_class) {
13077 AV** this_array_ptr;
13079 STRLEN cp_count = utf8_length(foldbuf,
13080 foldbuf + foldlen);
13081 SV* multi_fold = sv_2mortal(newSVpvn("", 0));
13083 Perl_sv_catpvf(aTHX_ multi_fold, "\\x{%"UVXf"}", value);
13086 if (! multi_char_matches) {
13087 multi_char_matches = newAV();
13090 /* <multi_char_matches> is actually an array of arrays.
13091 * There will be one or two top-level elements: [2],
13092 * and/or [3]. The [2] element is an array, each
13093 * element thereof is a character which folds to TWO
13094 * characters; [3] is for folds to THREE characters.
13095 * (Unicode guarantees a maximum of 3 characters in any
13096 * fold.) When we rewrite the character class below,
13097 * we will do so such that the longest folds are
13098 * written first, so that it prefers the longest
13099 * matching strings first. This is done even if it
13100 * turns out that any quantifier is non-greedy, out of
13101 * programmer laziness. Tom Christiansen has agreed
13102 * that this is ok. This makes the test for the
13103 * ligature 'ffi' come before the test for 'ff' */
13104 if (av_exists(multi_char_matches, cp_count)) {
13105 this_array_ptr = (AV**) av_fetch(multi_char_matches,
13107 this_array = *this_array_ptr;
13110 this_array = newAV();
13111 av_store(multi_char_matches, cp_count,
13114 av_push(this_array, multi_fold);
13117 /* This element should not be processed further in this
13120 value = save_value;
13121 prevvalue = save_prevvalue;
13127 /* Deal with this element of the class */
13130 cp_list = _add_range_to_invlist(cp_list, prevvalue, value);
13132 SV* this_range = _new_invlist(1);
13133 _append_range_to_invlist(this_range, prevvalue, value);
13135 /* In EBCDIC, the ranges 'A-Z' and 'a-z' are each not contiguous.
13136 * If this range was specified using something like 'i-j', we want
13137 * to include only the 'i' and the 'j', and not anything in
13138 * between, so exclude non-ASCII, non-alphabetics from it.
13139 * However, if the range was specified with something like
13140 * [\x89-\x91] or [\x89-j], all code points within it should be
13141 * included. literal_endpoint==2 means both ends of the range used
13142 * a literal character, not \x{foo} */
13143 if (literal_endpoint == 2
13144 && (prevvalue >= 'a' && value <= 'z')
13145 || (prevvalue >= 'A' && value <= 'Z'))
13147 _invlist_intersection(this_range, PL_Posix_ptrs[_CC_ALPHA],
13150 _invlist_union(cp_list, this_range, &cp_list);
13151 literal_endpoint = 0;
13155 range = 0; /* this range (if it was one) is done now */
13156 } /* End of loop through all the text within the brackets */
13158 /* If anything in the class expands to more than one character, we have to
13159 * deal with them by building up a substitute parse string, and recursively
13160 * calling reg() on it, instead of proceeding */
13161 if (multi_char_matches) {
13162 SV * substitute_parse = newSVpvn_flags("?:", 2, SVs_TEMP);
13165 char *save_end = RExC_end;
13166 char *save_parse = RExC_parse;
13167 bool first_time = TRUE; /* First multi-char occurrence doesn't get
13172 #if 0 /* Have decided not to deal with multi-char folds in inverted classes,
13173 because too confusing */
13175 sv_catpv(substitute_parse, "(?:");
13179 /* Look at the longest folds first */
13180 for (cp_count = av_len(multi_char_matches); cp_count > 0; cp_count--) {
13182 if (av_exists(multi_char_matches, cp_count)) {
13183 AV** this_array_ptr;
13186 this_array_ptr = (AV**) av_fetch(multi_char_matches,
13188 while ((this_sequence = av_pop(*this_array_ptr)) !=
13191 if (! first_time) {
13192 sv_catpv(substitute_parse, "|");
13194 first_time = FALSE;
13196 sv_catpv(substitute_parse, SvPVX(this_sequence));
13201 /* If the character class contains anything else besides these
13202 * multi-character folds, have to include it in recursive parsing */
13203 if (element_count) {
13204 sv_catpv(substitute_parse, "|[");
13205 sv_catpvn(substitute_parse, orig_parse, RExC_parse - orig_parse);
13206 sv_catpv(substitute_parse, "]");
13209 sv_catpv(substitute_parse, ")");
13212 /* This is a way to get the parse to skip forward a whole named
13213 * sequence instead of matching the 2nd character when it fails the
13215 sv_catpv(substitute_parse, "(*THEN)(*SKIP)(*FAIL)|.)");
13219 RExC_parse = SvPV(substitute_parse, len);
13220 RExC_end = RExC_parse + len;
13221 RExC_in_multi_char_class = 1;
13222 RExC_emit = (regnode *)orig_emit;
13224 ret = reg(pRExC_state, 1, ®_flags, depth+1);
13226 *flagp |= reg_flags&(HASWIDTH|SIMPLE|SPSTART|POSTPONED|RESTART_UTF8);
13228 RExC_parse = save_parse;
13229 RExC_end = save_end;
13230 RExC_in_multi_char_class = 0;
13231 SvREFCNT_dec_NN(multi_char_matches);
13235 /* If the character class contains only a single element, it may be
13236 * optimizable into another node type which is smaller and runs faster.
13237 * Check if this is the case for this class */
13238 if (element_count == 1 && ! ret_invlist) {
13242 if (namedclass > OOB_NAMEDCLASS) { /* this is a named class, like \w or
13243 [:digit:] or \p{foo} */
13245 /* All named classes are mapped into POSIXish nodes, with its FLAG
13246 * argument giving which class it is */
13247 switch ((I32)namedclass) {
13248 case ANYOF_UNIPROP:
13251 /* These don't depend on the charset modifiers. They always
13252 * match under /u rules */
13253 case ANYOF_NHORIZWS:
13254 case ANYOF_HORIZWS:
13255 namedclass = ANYOF_BLANK + namedclass - ANYOF_HORIZWS;
13258 case ANYOF_NVERTWS:
13263 /* The actual POSIXish node for all the rest depends on the
13264 * charset modifier. The ones in the first set depend only on
13265 * ASCII or, if available on this platform, locale */
13269 op = (LOC) ? POSIXL : POSIXA;
13280 /* under /a could be alpha */
13282 if (ASCII_RESTRICTED) {
13283 namedclass = ANYOF_ALPHA + (namedclass % 2);
13291 /* The rest have more possibilities depending on the charset.
13292 * We take advantage of the enum ordering of the charset
13293 * modifiers to get the exact node type, */
13295 op = POSIXD + get_regex_charset(RExC_flags);
13296 if (op > POSIXA) { /* /aa is same as /a */
13299 #ifndef HAS_ISBLANK
13301 && (namedclass == ANYOF_BLANK
13302 || namedclass == ANYOF_NBLANK))
13309 /* The odd numbered ones are the complements of the
13310 * next-lower even number one */
13311 if (namedclass % 2 == 1) {
13315 arg = namedclass_to_classnum(namedclass);
13319 else if (value == prevvalue) {
13321 /* Here, the class consists of just a single code point */
13324 if (! LOC && value == '\n') {
13325 op = REG_ANY; /* Optimize [^\n] */
13326 *flagp |= HASWIDTH|SIMPLE;
13330 else if (value < 256 || UTF) {
13332 /* Optimize a single value into an EXACTish node, but not if it
13333 * would require converting the pattern to UTF-8. */
13334 op = compute_EXACTish(pRExC_state);
13336 } /* Otherwise is a range */
13337 else if (! LOC) { /* locale could vary these */
13338 if (prevvalue == '0') {
13339 if (value == '9') {
13346 /* Here, we have changed <op> away from its initial value iff we found
13347 * an optimization */
13350 /* Throw away this ANYOF regnode, and emit the calculated one,
13351 * which should correspond to the beginning, not current, state of
13353 const char * cur_parse = RExC_parse;
13354 RExC_parse = (char *)orig_parse;
13358 /* To get locale nodes to not use the full ANYOF size would
13359 * require moving the code above that writes the portions
13360 * of it that aren't in other nodes to after this point.
13361 * e.g. ANYOF_CLASS_SET */
13362 RExC_size = orig_size;
13366 RExC_emit = (regnode *)orig_emit;
13367 if (PL_regkind[op] == POSIXD) {
13369 op += NPOSIXD - POSIXD;
13374 ret = reg_node(pRExC_state, op);
13376 if (PL_regkind[op] == POSIXD || PL_regkind[op] == NPOSIXD) {
13380 *flagp |= HASWIDTH|SIMPLE;
13382 else if (PL_regkind[op] == EXACT) {
13383 alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, 0, value);
13386 RExC_parse = (char *) cur_parse;
13388 SvREFCNT_dec(posixes);
13389 SvREFCNT_dec(cp_list);
13396 /****** !SIZE_ONLY (Pass 2) AFTER HERE *********/
13398 /* If folding, we calculate all characters that could fold to or from the
13399 * ones already on the list */
13400 if (FOLD && cp_list) {
13401 UV start, end; /* End points of code point ranges */
13403 SV* fold_intersection = NULL;
13405 /* If the highest code point is within Latin1, we can use the
13406 * compiled-in Alphas list, and not have to go out to disk. This
13407 * yields two false positives, the masculine and feminine ordinal
13408 * indicators, which are weeded out below using the
13409 * IS_IN_SOME_FOLD_L1() macro */
13410 if (invlist_highest(cp_list) < 256) {
13411 _invlist_intersection(PL_L1Posix_ptrs[_CC_ALPHA], cp_list,
13412 &fold_intersection);
13416 /* Here, there are non-Latin1 code points, so we will have to go
13417 * fetch the list of all the characters that participate in folds
13419 if (! PL_utf8_foldable) {
13420 SV* swash = swash_init("utf8", "_Perl_Any_Folds",
13421 &PL_sv_undef, 1, 0);
13422 PL_utf8_foldable = _get_swash_invlist(swash);
13423 SvREFCNT_dec_NN(swash);
13426 /* This is a hash that for a particular fold gives all characters
13427 * that are involved in it */
13428 if (! PL_utf8_foldclosures) {
13430 /* If we were unable to find any folds, then we likely won't be
13431 * able to find the closures. So just create an empty list.
13432 * Folding will effectively be restricted to the non-Unicode
13433 * rules hard-coded into Perl. (This case happens legitimately
13434 * during compilation of Perl itself before the Unicode tables
13435 * are generated) */
13436 if (_invlist_len(PL_utf8_foldable) == 0) {
13437 PL_utf8_foldclosures = newHV();
13440 /* If the folds haven't been read in, call a fold function
13442 if (! PL_utf8_tofold) {
13443 U8 dummy[UTF8_MAXBYTES+1];
13445 /* This string is just a short named one above \xff */
13446 to_utf8_fold((U8*) HYPHEN_UTF8, dummy, NULL);
13447 assert(PL_utf8_tofold); /* Verify that worked */
13449 PL_utf8_foldclosures =
13450 _swash_inversion_hash(PL_utf8_tofold);
13454 /* Only the characters in this class that participate in folds need
13455 * be checked. Get the intersection of this class and all the
13456 * possible characters that are foldable. This can quickly narrow
13457 * down a large class */
13458 _invlist_intersection(PL_utf8_foldable, cp_list,
13459 &fold_intersection);
13462 /* Now look at the foldable characters in this class individually */
13463 invlist_iterinit(fold_intersection);
13464 while (invlist_iternext(fold_intersection, &start, &end)) {
13467 /* Locale folding for Latin1 characters is deferred until runtime */
13468 if (LOC && start < 256) {
13472 /* Look at every character in the range */
13473 for (j = start; j <= end; j++) {
13475 U8 foldbuf[UTF8_MAXBYTES_CASE+1];
13481 /* We have the latin1 folding rules hard-coded here so that
13482 * an innocent-looking character class, like /[ks]/i won't
13483 * have to go out to disk to find the possible matches.
13484 * XXX It would be better to generate these via regen, in
13485 * case a new version of the Unicode standard adds new
13486 * mappings, though that is not really likely, and may be
13487 * caught by the default: case of the switch below. */
13489 if (IS_IN_SOME_FOLD_L1(j)) {
13491 /* ASCII is always matched; non-ASCII is matched only
13492 * under Unicode rules */
13493 if (isASCII(j) || AT_LEAST_UNI_SEMANTICS) {
13495 add_cp_to_invlist(cp_list, PL_fold_latin1[j]);
13499 add_cp_to_invlist(depends_list, PL_fold_latin1[j]);
13503 if (HAS_NONLATIN1_FOLD_CLOSURE(j)
13504 && (! isASCII(j) || ! ASCII_FOLD_RESTRICTED))
13506 /* Certain Latin1 characters have matches outside
13507 * Latin1. To get here, <j> is one of those
13508 * characters. None of these matches is valid for
13509 * ASCII characters under /aa, which is why the 'if'
13510 * just above excludes those. These matches only
13511 * happen when the target string is utf8. The code
13512 * below adds the single fold closures for <j> to the
13513 * inversion list. */
13518 add_cp_to_invlist(cp_list, KELVIN_SIGN);
13522 cp_list = add_cp_to_invlist(cp_list,
13523 LATIN_SMALL_LETTER_LONG_S);
13526 cp_list = add_cp_to_invlist(cp_list,
13527 GREEK_CAPITAL_LETTER_MU);
13528 cp_list = add_cp_to_invlist(cp_list,
13529 GREEK_SMALL_LETTER_MU);
13531 case LATIN_CAPITAL_LETTER_A_WITH_RING_ABOVE:
13532 case LATIN_SMALL_LETTER_A_WITH_RING_ABOVE:
13534 add_cp_to_invlist(cp_list, ANGSTROM_SIGN);
13536 case LATIN_SMALL_LETTER_Y_WITH_DIAERESIS:
13537 cp_list = add_cp_to_invlist(cp_list,
13538 LATIN_CAPITAL_LETTER_Y_WITH_DIAERESIS);
13540 case LATIN_SMALL_LETTER_SHARP_S:
13541 cp_list = add_cp_to_invlist(cp_list,
13542 LATIN_CAPITAL_LETTER_SHARP_S);
13544 case 'F': case 'f':
13545 case 'I': case 'i':
13546 case 'L': case 'l':
13547 case 'T': case 't':
13548 case 'A': case 'a':
13549 case 'H': case 'h':
13550 case 'J': case 'j':
13551 case 'N': case 'n':
13552 case 'W': case 'w':
13553 case 'Y': case 'y':
13554 /* These all are targets of multi-character
13555 * folds from code points that require UTF8 to
13556 * express, so they can't match unless the
13557 * target string is in UTF-8, so no action here
13558 * is necessary, as regexec.c properly handles
13559 * the general case for UTF-8 matching and
13560 * multi-char folds */
13563 /* Use deprecated warning to increase the
13564 * chances of this being output */
13565 ckWARN2regdep(RExC_parse, "Perl folding rules are not up-to-date for 0x%"UVXf"; please use the perlbug utility to report;", j);
13572 /* Here is an above Latin1 character. We don't have the rules
13573 * hard-coded for it. First, get its fold. This is the simple
13574 * fold, as the multi-character folds have been handled earlier
13575 * and separated out */
13576 _to_uni_fold_flags(j, foldbuf, &foldlen,
13578 ? FOLD_FLAGS_LOCALE
13579 : (ASCII_FOLD_RESTRICTED)
13580 ? FOLD_FLAGS_NOMIX_ASCII
13583 /* Single character fold of above Latin1. Add everything in
13584 * its fold closure to the list that this node should match.
13585 * The fold closures data structure is a hash with the keys
13586 * being the UTF-8 of every character that is folded to, like
13587 * 'k', and the values each an array of all code points that
13588 * fold to its key. e.g. [ 'k', 'K', KELVIN_SIGN ].
13589 * Multi-character folds are not included */
13590 if ((listp = hv_fetch(PL_utf8_foldclosures,
13591 (char *) foldbuf, foldlen, FALSE)))
13593 AV* list = (AV*) *listp;
13595 for (k = 0; k <= av_len(list); k++) {
13596 SV** c_p = av_fetch(list, k, FALSE);
13599 Perl_croak(aTHX_ "panic: invalid PL_utf8_foldclosures structure");
13603 /* /aa doesn't allow folds between ASCII and non-; /l
13604 * doesn't allow them between above and below 256 */
13605 if ((ASCII_FOLD_RESTRICTED
13606 && (isASCII(c) != isASCII(j)))
13607 || (LOC && c < 256)) {
13611 /* Folds involving non-ascii Latin1 characters
13612 * under /d are added to a separate list */
13613 if (isASCII(c) || c > 255 || AT_LEAST_UNI_SEMANTICS)
13615 cp_list = add_cp_to_invlist(cp_list, c);
13618 depends_list = add_cp_to_invlist(depends_list, c);
13624 SvREFCNT_dec_NN(fold_intersection);
13627 /* And combine the result (if any) with any inversion list from posix
13628 * classes. The lists are kept separate up to now because we don't want to
13629 * fold the classes (folding of those is automatically handled by the swash
13630 * fetching code) */
13632 if (! DEPENDS_SEMANTICS) {
13634 _invlist_union(cp_list, posixes, &cp_list);
13635 SvREFCNT_dec_NN(posixes);
13642 /* Under /d, we put into a separate list the Latin1 things that
13643 * match only when the target string is utf8 */
13644 SV* nonascii_but_latin1_properties = NULL;
13645 _invlist_intersection(posixes, PL_Latin1,
13646 &nonascii_but_latin1_properties);
13647 _invlist_subtract(nonascii_but_latin1_properties, PL_ASCII,
13648 &nonascii_but_latin1_properties);
13649 _invlist_subtract(posixes, nonascii_but_latin1_properties,
13652 _invlist_union(cp_list, posixes, &cp_list);
13653 SvREFCNT_dec_NN(posixes);
13659 if (depends_list) {
13660 _invlist_union(depends_list, nonascii_but_latin1_properties,
13662 SvREFCNT_dec_NN(nonascii_but_latin1_properties);
13665 depends_list = nonascii_but_latin1_properties;
13670 /* And combine the result (if any) with any inversion list from properties.
13671 * The lists are kept separate up to now so that we can distinguish the two
13672 * in regards to matching above-Unicode. A run-time warning is generated
13673 * if a Unicode property is matched against a non-Unicode code point. But,
13674 * we allow user-defined properties to match anything, without any warning,
13675 * and we also suppress the warning if there is a portion of the character
13676 * class that isn't a Unicode property, and which matches above Unicode, \W
13677 * or [\x{110000}] for example.
13678 * (Note that in this case, unlike the Posix one above, there is no
13679 * <depends_list>, because having a Unicode property forces Unicode
13682 bool warn_super = ! has_user_defined_property;
13685 /* If it matters to the final outcome, see if a non-property
13686 * component of the class matches above Unicode. If so, the
13687 * warning gets suppressed. This is true even if just a single
13688 * such code point is specified, as though not strictly correct if
13689 * another such code point is matched against, the fact that they
13690 * are using above-Unicode code points indicates they should know
13691 * the issues involved */
13693 bool non_prop_matches_above_Unicode =
13694 runtime_posix_matches_above_Unicode
13695 | (invlist_highest(cp_list) > PERL_UNICODE_MAX);
13697 non_prop_matches_above_Unicode =
13698 ! non_prop_matches_above_Unicode;
13700 warn_super = ! non_prop_matches_above_Unicode;
13703 _invlist_union(properties, cp_list, &cp_list);
13704 SvREFCNT_dec_NN(properties);
13707 cp_list = properties;
13711 OP(ret) = ANYOF_WARN_SUPER;
13715 /* Here, we have calculated what code points should be in the character
13718 * Now we can see about various optimizations. Fold calculation (which we
13719 * did above) needs to take place before inversion. Otherwise /[^k]/i
13720 * would invert to include K, which under /i would match k, which it
13721 * shouldn't. Therefore we can't invert folded locale now, as it won't be
13722 * folded until runtime */
13724 /* Optimize inverted simple patterns (e.g. [^a-z]) when everything is known
13725 * at compile time. Besides not inverting folded locale now, we can't
13726 * invert if there are things such as \w, which aren't known until runtime
13729 && ! (LOC && (FOLD || (ANYOF_FLAGS(ret) & ANYOF_CLASS)))
13731 && ! HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION)
13733 _invlist_invert(cp_list);
13735 /* Any swash can't be used as-is, because we've inverted things */
13737 SvREFCNT_dec_NN(swash);
13741 /* Clear the invert flag since have just done it here */
13746 *ret_invlist = cp_list;
13747 SvREFCNT_dec(swash);
13749 /* Discard the generated node */
13751 RExC_size = orig_size;
13754 RExC_emit = orig_emit;
13759 /* If we didn't do folding, it's because some information isn't available
13760 * until runtime; set the run-time fold flag for these. (We don't have to
13761 * worry about properties folding, as that is taken care of by the swash
13765 ANYOF_FLAGS(ret) |= ANYOF_LOC_FOLD;
13768 /* Some character classes are equivalent to other nodes. Such nodes take
13769 * up less room and generally fewer operations to execute than ANYOF nodes.
13770 * Above, we checked for and optimized into some such equivalents for
13771 * certain common classes that are easy to test. Getting to this point in
13772 * the code means that the class didn't get optimized there. Since this
13773 * code is only executed in Pass 2, it is too late to save space--it has
13774 * been allocated in Pass 1, and currently isn't given back. But turning
13775 * things into an EXACTish node can allow the optimizer to join it to any
13776 * adjacent such nodes. And if the class is equivalent to things like /./,
13777 * expensive run-time swashes can be avoided. Now that we have more
13778 * complete information, we can find things necessarily missed by the
13779 * earlier code. I (khw) am not sure how much to look for here. It would
13780 * be easy, but perhaps too slow, to check any candidates against all the
13781 * node types they could possibly match using _invlistEQ(). */
13786 && ! (ANYOF_FLAGS(ret) & ANYOF_CLASS)
13787 && ! HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION)
13790 U8 op = END; /* The optimzation node-type */
13791 const char * cur_parse= RExC_parse;
13793 invlist_iterinit(cp_list);
13794 if (! invlist_iternext(cp_list, &start, &end)) {
13796 /* Here, the list is empty. This happens, for example, when a
13797 * Unicode property is the only thing in the character class, and
13798 * it doesn't match anything. (perluniprops.pod notes such
13801 *flagp |= HASWIDTH|SIMPLE;
13803 else if (start == end) { /* The range is a single code point */
13804 if (! invlist_iternext(cp_list, &start, &end)
13806 /* Don't do this optimization if it would require changing
13807 * the pattern to UTF-8 */
13808 && (start < 256 || UTF))
13810 /* Here, the list contains a single code point. Can optimize
13811 * into an EXACT node */
13820 /* A locale node under folding with one code point can be
13821 * an EXACTFL, as its fold won't be calculated until
13827 /* Here, we are generally folding, but there is only one
13828 * code point to match. If we have to, we use an EXACT
13829 * node, but it would be better for joining with adjacent
13830 * nodes in the optimization pass if we used the same
13831 * EXACTFish node that any such are likely to be. We can
13832 * do this iff the code point doesn't participate in any
13833 * folds. For example, an EXACTF of a colon is the same as
13834 * an EXACT one, since nothing folds to or from a colon. */
13836 if (IS_IN_SOME_FOLD_L1(value)) {
13841 if (! PL_utf8_foldable) {
13842 SV* swash = swash_init("utf8", "_Perl_Any_Folds",
13843 &PL_sv_undef, 1, 0);
13844 PL_utf8_foldable = _get_swash_invlist(swash);
13845 SvREFCNT_dec_NN(swash);
13847 if (_invlist_contains_cp(PL_utf8_foldable, value)) {
13852 /* If we haven't found the node type, above, it means we
13853 * can use the prevailing one */
13855 op = compute_EXACTish(pRExC_state);
13860 else if (start == 0) {
13861 if (end == UV_MAX) {
13863 *flagp |= HASWIDTH|SIMPLE;
13866 else if (end == '\n' - 1
13867 && invlist_iternext(cp_list, &start, &end)
13868 && start == '\n' + 1 && end == UV_MAX)
13871 *flagp |= HASWIDTH|SIMPLE;
13875 invlist_iterfinish(cp_list);
13878 RExC_parse = (char *)orig_parse;
13879 RExC_emit = (regnode *)orig_emit;
13881 ret = reg_node(pRExC_state, op);
13883 RExC_parse = (char *)cur_parse;
13885 if (PL_regkind[op] == EXACT) {
13886 alloc_maybe_populate_EXACT(pRExC_state, ret, flagp, 0, value);
13889 SvREFCNT_dec_NN(cp_list);
13894 /* Here, <cp_list> contains all the code points we can determine at
13895 * compile time that match under all conditions. Go through it, and
13896 * for things that belong in the bitmap, put them there, and delete from
13897 * <cp_list>. While we are at it, see if everything above 255 is in the
13898 * list, and if so, set a flag to speed up execution */
13899 ANYOF_BITMAP_ZERO(ret);
13902 /* This gets set if we actually need to modify things */
13903 bool change_invlist = FALSE;
13907 /* Start looking through <cp_list> */
13908 invlist_iterinit(cp_list);
13909 while (invlist_iternext(cp_list, &start, &end)) {
13913 if (end == UV_MAX && start <= 256) {
13914 ANYOF_FLAGS(ret) |= ANYOF_UNICODE_ALL;
13917 /* Quit if are above what we should change */
13922 change_invlist = TRUE;
13924 /* Set all the bits in the range, up to the max that we are doing */
13925 high = (end < 255) ? end : 255;
13926 for (i = start; i <= (int) high; i++) {
13927 if (! ANYOF_BITMAP_TEST(ret, i)) {
13928 ANYOF_BITMAP_SET(ret, i);
13934 invlist_iterfinish(cp_list);
13936 /* Done with loop; remove any code points that are in the bitmap from
13938 if (change_invlist) {
13939 _invlist_subtract(cp_list, PL_Latin1, &cp_list);
13942 /* If have completely emptied it, remove it completely */
13943 if (_invlist_len(cp_list) == 0) {
13944 SvREFCNT_dec_NN(cp_list);
13950 ANYOF_FLAGS(ret) |= ANYOF_INVERT;
13953 /* Here, the bitmap has been populated with all the Latin1 code points that
13954 * always match. Can now add to the overall list those that match only
13955 * when the target string is UTF-8 (<depends_list>). */
13956 if (depends_list) {
13958 _invlist_union(cp_list, depends_list, &cp_list);
13959 SvREFCNT_dec_NN(depends_list);
13962 cp_list = depends_list;
13966 /* If there is a swash and more than one element, we can't use the swash in
13967 * the optimization below. */
13968 if (swash && element_count > 1) {
13969 SvREFCNT_dec_NN(swash);
13974 && ! HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION)
13976 ARG_SET(ret, ANYOF_NONBITMAP_EMPTY);
13979 /* av[0] stores the character class description in its textual form:
13980 * used later (regexec.c:Perl_regclass_swash()) to initialize the
13981 * appropriate swash, and is also useful for dumping the regnode.
13982 * av[1] if NULL, is a placeholder to later contain the swash computed
13983 * from av[0]. But if no further computation need be done, the
13984 * swash is stored there now.
13985 * av[2] stores the cp_list inversion list for use in addition or
13986 * instead of av[0]; used only if av[1] is NULL
13987 * av[3] is set if any component of the class is from a user-defined
13988 * property; used only if av[1] is NULL */
13989 AV * const av = newAV();
13992 av_store(av, 0, (HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION)
13993 ? SvREFCNT_inc(listsv) : &PL_sv_undef);
13995 av_store(av, 1, swash);
13996 SvREFCNT_dec_NN(cp_list);
13999 av_store(av, 1, NULL);
14001 av_store(av, 2, cp_list);
14002 av_store(av, 3, newSVuv(has_user_defined_property));
14006 rv = newRV_noinc(MUTABLE_SV(av));
14007 n = add_data(pRExC_state, 1, "s");
14008 RExC_rxi->data->data[n] = (void*)rv;
14012 *flagp |= HASWIDTH|SIMPLE;
14015 #undef HAS_NONLOCALE_RUNTIME_PROPERTY_DEFINITION
14018 /* reg_skipcomment()
14020 Absorbs an /x style # comments from the input stream.
14021 Returns true if there is more text remaining in the stream.
14022 Will set the REG_SEEN_RUN_ON_COMMENT flag if the comment
14023 terminates the pattern without including a newline.
14025 Note its the callers responsibility to ensure that we are
14026 actually in /x mode
14031 S_reg_skipcomment(pTHX_ RExC_state_t *pRExC_state)
14035 PERL_ARGS_ASSERT_REG_SKIPCOMMENT;
14037 while (RExC_parse < RExC_end)
14038 if (*RExC_parse++ == '\n') {
14043 /* we ran off the end of the pattern without ending
14044 the comment, so we have to add an \n when wrapping */
14045 RExC_seen |= REG_SEEN_RUN_ON_COMMENT;
14053 Advances the parse position, and optionally absorbs
14054 "whitespace" from the inputstream.
14056 Without /x "whitespace" means (?#...) style comments only,
14057 with /x this means (?#...) and # comments and whitespace proper.
14059 Returns the RExC_parse point from BEFORE the scan occurs.
14061 This is the /x friendly way of saying RExC_parse++.
14065 S_nextchar(pTHX_ RExC_state_t *pRExC_state)
14067 char* const retval = RExC_parse++;
14069 PERL_ARGS_ASSERT_NEXTCHAR;
14072 if (RExC_end - RExC_parse >= 3
14073 && *RExC_parse == '('
14074 && RExC_parse[1] == '?'
14075 && RExC_parse[2] == '#')
14077 while (*RExC_parse != ')') {
14078 if (RExC_parse == RExC_end)
14079 FAIL("Sequence (?#... not terminated");
14085 if (RExC_flags & RXf_PMf_EXTENDED) {
14086 if (isSPACE(*RExC_parse)) {
14090 else if (*RExC_parse == '#') {
14091 if ( reg_skipcomment( pRExC_state ) )
14100 - reg_node - emit a node
14102 STATIC regnode * /* Location. */
14103 S_reg_node(pTHX_ RExC_state_t *pRExC_state, U8 op)
14107 regnode * const ret = RExC_emit;
14108 GET_RE_DEBUG_FLAGS_DECL;
14110 PERL_ARGS_ASSERT_REG_NODE;
14113 SIZE_ALIGN(RExC_size);
14117 if (RExC_emit >= RExC_emit_bound)
14118 Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d, %p>=%p",
14119 op, RExC_emit, RExC_emit_bound);
14121 NODE_ALIGN_FILL(ret);
14123 FILL_ADVANCE_NODE(ptr, op);
14124 #ifdef RE_TRACK_PATTERN_OFFSETS
14125 if (RExC_offsets) { /* MJD */
14126 MJD_OFFSET_DEBUG(("%s:%d: (op %s) %s %"UVuf" (len %"UVuf") (max %"UVuf").\n",
14127 "reg_node", __LINE__,
14129 (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0]
14130 ? "Overwriting end of array!\n" : "OK",
14131 (UV)(RExC_emit - RExC_emit_start),
14132 (UV)(RExC_parse - RExC_start),
14133 (UV)RExC_offsets[0]));
14134 Set_Node_Offset(RExC_emit, RExC_parse + (op == END));
14142 - reganode - emit a node with an argument
14144 STATIC regnode * /* Location. */
14145 S_reganode(pTHX_ RExC_state_t *pRExC_state, U8 op, U32 arg)
14149 regnode * const ret = RExC_emit;
14150 GET_RE_DEBUG_FLAGS_DECL;
14152 PERL_ARGS_ASSERT_REGANODE;
14155 SIZE_ALIGN(RExC_size);
14160 assert(2==regarglen[op]+1);
14162 Anything larger than this has to allocate the extra amount.
14163 If we changed this to be:
14165 RExC_size += (1 + regarglen[op]);
14167 then it wouldn't matter. Its not clear what side effect
14168 might come from that so its not done so far.
14173 if (RExC_emit >= RExC_emit_bound)
14174 Perl_croak(aTHX_ "panic: reg_node overrun trying to emit %d, %p>=%p",
14175 op, RExC_emit, RExC_emit_bound);
14177 NODE_ALIGN_FILL(ret);
14179 FILL_ADVANCE_NODE_ARG(ptr, op, arg);
14180 #ifdef RE_TRACK_PATTERN_OFFSETS
14181 if (RExC_offsets) { /* MJD */
14182 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n",
14186 (UV)(RExC_emit - RExC_emit_start) > RExC_offsets[0] ?
14187 "Overwriting end of array!\n" : "OK",
14188 (UV)(RExC_emit - RExC_emit_start),
14189 (UV)(RExC_parse - RExC_start),
14190 (UV)RExC_offsets[0]));
14191 Set_Cur_Node_Offset;
14199 - reguni - emit (if appropriate) a Unicode character
14202 S_reguni(pTHX_ const RExC_state_t *pRExC_state, UV uv, char* s)
14206 PERL_ARGS_ASSERT_REGUNI;
14208 return SIZE_ONLY ? UNISKIP(uv) : (uvchr_to_utf8((U8*)s, uv) - (U8*)s);
14212 - reginsert - insert an operator in front of already-emitted operand
14214 * Means relocating the operand.
14217 S_reginsert(pTHX_ RExC_state_t *pRExC_state, U8 op, regnode *opnd, U32 depth)
14223 const int offset = regarglen[(U8)op];
14224 const int size = NODE_STEP_REGNODE + offset;
14225 GET_RE_DEBUG_FLAGS_DECL;
14227 PERL_ARGS_ASSERT_REGINSERT;
14228 PERL_UNUSED_ARG(depth);
14229 /* (PL_regkind[(U8)op] == CURLY ? EXTRA_STEP_2ARGS : 0); */
14230 DEBUG_PARSE_FMT("inst"," - %s",PL_reg_name[op]);
14239 if (RExC_open_parens) {
14241 /*DEBUG_PARSE_FMT("inst"," - %"IVdf, (IV)RExC_npar);*/
14242 for ( paren=0 ; paren < RExC_npar ; paren++ ) {
14243 if ( RExC_open_parens[paren] >= opnd ) {
14244 /*DEBUG_PARSE_FMT("open"," - %d",size);*/
14245 RExC_open_parens[paren] += size;
14247 /*DEBUG_PARSE_FMT("open"," - %s","ok");*/
14249 if ( RExC_close_parens[paren] >= opnd ) {
14250 /*DEBUG_PARSE_FMT("close"," - %d",size);*/
14251 RExC_close_parens[paren] += size;
14253 /*DEBUG_PARSE_FMT("close"," - %s","ok");*/
14258 while (src > opnd) {
14259 StructCopy(--src, --dst, regnode);
14260 #ifdef RE_TRACK_PATTERN_OFFSETS
14261 if (RExC_offsets) { /* MJD 20010112 */
14262 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s copy %"UVuf" -> %"UVuf" (max %"UVuf").\n",
14266 (UV)(dst - RExC_emit_start) > RExC_offsets[0]
14267 ? "Overwriting end of array!\n" : "OK",
14268 (UV)(src - RExC_emit_start),
14269 (UV)(dst - RExC_emit_start),
14270 (UV)RExC_offsets[0]));
14271 Set_Node_Offset_To_R(dst-RExC_emit_start, Node_Offset(src));
14272 Set_Node_Length_To_R(dst-RExC_emit_start, Node_Length(src));
14278 place = opnd; /* Op node, where operand used to be. */
14279 #ifdef RE_TRACK_PATTERN_OFFSETS
14280 if (RExC_offsets) { /* MJD */
14281 MJD_OFFSET_DEBUG(("%s(%d): (op %s) %s %"UVuf" <- %"UVuf" (max %"UVuf").\n",
14285 (UV)(place - RExC_emit_start) > RExC_offsets[0]
14286 ? "Overwriting end of array!\n" : "OK",
14287 (UV)(place - RExC_emit_start),
14288 (UV)(RExC_parse - RExC_start),
14289 (UV)RExC_offsets[0]));
14290 Set_Node_Offset(place, RExC_parse);
14291 Set_Node_Length(place, 1);
14294 src = NEXTOPER(place);
14295 FILL_ADVANCE_NODE(place, op);
14296 Zero(src, offset, regnode);
14300 - regtail - set the next-pointer at the end of a node chain of p to val.
14301 - SEE ALSO: regtail_study
14303 /* TODO: All three parms should be const */
14305 S_regtail(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth)
14309 GET_RE_DEBUG_FLAGS_DECL;
14311 PERL_ARGS_ASSERT_REGTAIL;
14313 PERL_UNUSED_ARG(depth);
14319 /* Find last node. */
14322 regnode * const temp = regnext(scan);
14324 SV * const mysv=sv_newmortal();
14325 DEBUG_PARSE_MSG((scan==p ? "tail" : ""));
14326 regprop(RExC_rx, mysv, scan);
14327 PerlIO_printf(Perl_debug_log, "~ %s (%d) %s %s\n",
14328 SvPV_nolen_const(mysv), REG_NODE_NUM(scan),
14329 (temp == NULL ? "->" : ""),
14330 (temp == NULL ? PL_reg_name[OP(val)] : "")
14338 if (reg_off_by_arg[OP(scan)]) {
14339 ARG_SET(scan, val - scan);
14342 NEXT_OFF(scan) = val - scan;
14348 - regtail_study - set the next-pointer at the end of a node chain of p to val.
14349 - Look for optimizable sequences at the same time.
14350 - currently only looks for EXACT chains.
14352 This is experimental code. The idea is to use this routine to perform
14353 in place optimizations on branches and groups as they are constructed,
14354 with the long term intention of removing optimization from study_chunk so
14355 that it is purely analytical.
14357 Currently only used when in DEBUG mode. The macro REGTAIL_STUDY() is used
14358 to control which is which.
14361 /* TODO: All four parms should be const */
14364 S_regtail_study(pTHX_ RExC_state_t *pRExC_state, regnode *p, const regnode *val,U32 depth)
14369 #ifdef EXPERIMENTAL_INPLACESCAN
14372 GET_RE_DEBUG_FLAGS_DECL;
14374 PERL_ARGS_ASSERT_REGTAIL_STUDY;
14380 /* Find last node. */
14384 regnode * const temp = regnext(scan);
14385 #ifdef EXPERIMENTAL_INPLACESCAN
14386 if (PL_regkind[OP(scan)] == EXACT) {
14387 bool has_exactf_sharp_s; /* Unexamined in this routine */
14388 if (join_exact(pRExC_state,scan,&min, &has_exactf_sharp_s, 1,val,depth+1))
14393 switch (OP(scan)) {
14399 case EXACTFU_TRICKYFOLD:
14401 if( exact == PSEUDO )
14403 else if ( exact != OP(scan) )
14412 SV * const mysv=sv_newmortal();
14413 DEBUG_PARSE_MSG((scan==p ? "tsdy" : ""));
14414 regprop(RExC_rx, mysv, scan);
14415 PerlIO_printf(Perl_debug_log, "~ %s (%d) -> %s\n",
14416 SvPV_nolen_const(mysv),
14417 REG_NODE_NUM(scan),
14418 PL_reg_name[exact]);
14425 SV * const mysv_val=sv_newmortal();
14426 DEBUG_PARSE_MSG("");
14427 regprop(RExC_rx, mysv_val, val);
14428 PerlIO_printf(Perl_debug_log, "~ attach to %s (%"IVdf") offset to %"IVdf"\n",
14429 SvPV_nolen_const(mysv_val),
14430 (IV)REG_NODE_NUM(val),
14434 if (reg_off_by_arg[OP(scan)]) {
14435 ARG_SET(scan, val - scan);
14438 NEXT_OFF(scan) = val - scan;
14446 - regdump - dump a regexp onto Perl_debug_log in vaguely comprehensible form
14450 S_regdump_extflags(pTHX_ const char *lead, const U32 flags)
14456 for (bit=0; bit<32; bit++) {
14457 if (flags & (1<<bit)) {
14458 if ((1<<bit) & RXf_PMf_CHARSET) { /* Output separately, below */
14461 if (!set++ && lead)
14462 PerlIO_printf(Perl_debug_log, "%s",lead);
14463 PerlIO_printf(Perl_debug_log, "%s ",PL_reg_extflags_name[bit]);
14466 if ((cs = get_regex_charset(flags)) != REGEX_DEPENDS_CHARSET) {
14467 if (!set++ && lead) {
14468 PerlIO_printf(Perl_debug_log, "%s",lead);
14471 case REGEX_UNICODE_CHARSET:
14472 PerlIO_printf(Perl_debug_log, "UNICODE");
14474 case REGEX_LOCALE_CHARSET:
14475 PerlIO_printf(Perl_debug_log, "LOCALE");
14477 case REGEX_ASCII_RESTRICTED_CHARSET:
14478 PerlIO_printf(Perl_debug_log, "ASCII-RESTRICTED");
14480 case REGEX_ASCII_MORE_RESTRICTED_CHARSET:
14481 PerlIO_printf(Perl_debug_log, "ASCII-MORE_RESTRICTED");
14484 PerlIO_printf(Perl_debug_log, "UNKNOWN CHARACTER SET");
14490 PerlIO_printf(Perl_debug_log, "\n");
14492 PerlIO_printf(Perl_debug_log, "%s[none-set]\n",lead);
14498 Perl_regdump(pTHX_ const regexp *r)
14502 SV * const sv = sv_newmortal();
14503 SV *dsv= sv_newmortal();
14504 RXi_GET_DECL(r,ri);
14505 GET_RE_DEBUG_FLAGS_DECL;
14507 PERL_ARGS_ASSERT_REGDUMP;
14509 (void)dumpuntil(r, ri->program, ri->program + 1, NULL, NULL, sv, 0, 0);
14511 /* Header fields of interest. */
14512 if (r->anchored_substr) {
14513 RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->anchored_substr),
14514 RE_SV_DUMPLEN(r->anchored_substr), 30);
14515 PerlIO_printf(Perl_debug_log,
14516 "anchored %s%s at %"IVdf" ",
14517 s, RE_SV_TAIL(r->anchored_substr),
14518 (IV)r->anchored_offset);
14519 } else if (r->anchored_utf8) {
14520 RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->anchored_utf8),
14521 RE_SV_DUMPLEN(r->anchored_utf8), 30);
14522 PerlIO_printf(Perl_debug_log,
14523 "anchored utf8 %s%s at %"IVdf" ",
14524 s, RE_SV_TAIL(r->anchored_utf8),
14525 (IV)r->anchored_offset);
14527 if (r->float_substr) {
14528 RE_PV_QUOTED_DECL(s, 0, dsv, SvPVX_const(r->float_substr),
14529 RE_SV_DUMPLEN(r->float_substr), 30);
14530 PerlIO_printf(Perl_debug_log,
14531 "floating %s%s at %"IVdf"..%"UVuf" ",
14532 s, RE_SV_TAIL(r->float_substr),
14533 (IV)r->float_min_offset, (UV)r->float_max_offset);
14534 } else if (r->float_utf8) {
14535 RE_PV_QUOTED_DECL(s, 1, dsv, SvPVX_const(r->float_utf8),
14536 RE_SV_DUMPLEN(r->float_utf8), 30);
14537 PerlIO_printf(Perl_debug_log,
14538 "floating utf8 %s%s at %"IVdf"..%"UVuf" ",
14539 s, RE_SV_TAIL(r->float_utf8),
14540 (IV)r->float_min_offset, (UV)r->float_max_offset);
14542 if (r->check_substr || r->check_utf8)
14543 PerlIO_printf(Perl_debug_log,
14545 (r->check_substr == r->float_substr
14546 && r->check_utf8 == r->float_utf8
14547 ? "(checking floating" : "(checking anchored"));
14548 if (r->extflags & RXf_NOSCAN)
14549 PerlIO_printf(Perl_debug_log, " noscan");
14550 if (r->extflags & RXf_CHECK_ALL)
14551 PerlIO_printf(Perl_debug_log, " isall");
14552 if (r->check_substr || r->check_utf8)
14553 PerlIO_printf(Perl_debug_log, ") ");
14555 if (ri->regstclass) {
14556 regprop(r, sv, ri->regstclass);
14557 PerlIO_printf(Perl_debug_log, "stclass %s ", SvPVX_const(sv));
14559 if (r->extflags & RXf_ANCH) {
14560 PerlIO_printf(Perl_debug_log, "anchored");
14561 if (r->extflags & RXf_ANCH_BOL)
14562 PerlIO_printf(Perl_debug_log, "(BOL)");
14563 if (r->extflags & RXf_ANCH_MBOL)
14564 PerlIO_printf(Perl_debug_log, "(MBOL)");
14565 if (r->extflags & RXf_ANCH_SBOL)
14566 PerlIO_printf(Perl_debug_log, "(SBOL)");
14567 if (r->extflags & RXf_ANCH_GPOS)
14568 PerlIO_printf(Perl_debug_log, "(GPOS)");
14569 PerlIO_putc(Perl_debug_log, ' ');
14571 if (r->extflags & RXf_GPOS_SEEN)
14572 PerlIO_printf(Perl_debug_log, "GPOS:%"UVuf" ", (UV)r->gofs);
14573 if (r->intflags & PREGf_SKIP)
14574 PerlIO_printf(Perl_debug_log, "plus ");
14575 if (r->intflags & PREGf_IMPLICIT)
14576 PerlIO_printf(Perl_debug_log, "implicit ");
14577 PerlIO_printf(Perl_debug_log, "minlen %"IVdf" ", (IV)r->minlen);
14578 if (r->extflags & RXf_EVAL_SEEN)
14579 PerlIO_printf(Perl_debug_log, "with eval ");
14580 PerlIO_printf(Perl_debug_log, "\n");
14581 DEBUG_FLAGS_r(regdump_extflags("r->extflags: ",r->extflags));
14583 PERL_ARGS_ASSERT_REGDUMP;
14584 PERL_UNUSED_CONTEXT;
14585 PERL_UNUSED_ARG(r);
14586 #endif /* DEBUGGING */
14590 - regprop - printable representation of opcode
14592 #define EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags) \
14595 Perl_sv_catpvf(aTHX_ sv,"%s][%s",PL_colors[1],PL_colors[0]); \
14596 if (flags & ANYOF_INVERT) \
14597 /*make sure the invert info is in each */ \
14598 sv_catpvs(sv, "^"); \
14604 Perl_regprop(pTHX_ const regexp *prog, SV *sv, const regnode *o)
14610 /* Should be synchronized with * ANYOF_ #xdefines in regcomp.h */
14611 static const char * const anyofs[] = {
14612 #if _CC_WORDCHAR != 0 || _CC_DIGIT != 1 || _CC_ALPHA != 2 || _CC_LOWER != 3 \
14613 || _CC_UPPER != 4 || _CC_PUNCT != 5 || _CC_PRINT != 6 \
14614 || _CC_ALPHANUMERIC != 7 || _CC_GRAPH != 8 || _CC_CASED != 9 \
14615 || _CC_SPACE != 10 || _CC_BLANK != 11 || _CC_XDIGIT != 12 \
14616 || _CC_PSXSPC != 13 || _CC_CNTRL != 14 || _CC_ASCII != 15 \
14617 || _CC_VERTSPACE != 16
14618 #error Need to adjust order of anyofs[]
14655 RXi_GET_DECL(prog,progi);
14656 GET_RE_DEBUG_FLAGS_DECL;
14658 PERL_ARGS_ASSERT_REGPROP;
14662 if (OP(o) > REGNODE_MAX) /* regnode.type is unsigned */
14663 /* It would be nice to FAIL() here, but this may be called from
14664 regexec.c, and it would be hard to supply pRExC_state. */
14665 Perl_croak(aTHX_ "Corrupted regexp opcode %d > %d", (int)OP(o), (int)REGNODE_MAX);
14666 sv_catpv(sv, PL_reg_name[OP(o)]); /* Take off const! */
14668 k = PL_regkind[OP(o)];
14671 sv_catpvs(sv, " ");
14672 /* Using is_utf8_string() (via PERL_PV_UNI_DETECT)
14673 * is a crude hack but it may be the best for now since
14674 * we have no flag "this EXACTish node was UTF-8"
14676 pv_pretty(sv, STRING(o), STR_LEN(o), 60, PL_colors[0], PL_colors[1],
14677 PERL_PV_ESCAPE_UNI_DETECT |
14678 PERL_PV_ESCAPE_NONASCII |
14679 PERL_PV_PRETTY_ELLIPSES |
14680 PERL_PV_PRETTY_LTGT |
14681 PERL_PV_PRETTY_NOCLEAR
14683 } else if (k == TRIE) {
14684 /* print the details of the trie in dumpuntil instead, as
14685 * progi->data isn't available here */
14686 const char op = OP(o);
14687 const U32 n = ARG(o);
14688 const reg_ac_data * const ac = IS_TRIE_AC(op) ?
14689 (reg_ac_data *)progi->data->data[n] :
14691 const reg_trie_data * const trie
14692 = (reg_trie_data*)progi->data->data[!IS_TRIE_AC(op) ? n : ac->trie];
14694 Perl_sv_catpvf(aTHX_ sv, "-%s",PL_reg_name[o->flags]);
14695 DEBUG_TRIE_COMPILE_r(
14696 Perl_sv_catpvf(aTHX_ sv,
14697 "<S:%"UVuf"/%"IVdf" W:%"UVuf" L:%"UVuf"/%"UVuf" C:%"UVuf"/%"UVuf">",
14698 (UV)trie->startstate,
14699 (IV)trie->statecount-1, /* -1 because of the unused 0 element */
14700 (UV)trie->wordcount,
14703 (UV)TRIE_CHARCOUNT(trie),
14704 (UV)trie->uniquecharcount
14707 if ( IS_ANYOF_TRIE(op) || trie->bitmap ) {
14709 int rangestart = -1;
14710 U8* bitmap = IS_ANYOF_TRIE(op) ? (U8*)ANYOF_BITMAP(o) : (U8*)TRIE_BITMAP(trie);
14711 sv_catpvs(sv, "[");
14712 for (i = 0; i <= 256; i++) {
14713 if (i < 256 && BITMAP_TEST(bitmap,i)) {
14714 if (rangestart == -1)
14716 } else if (rangestart != -1) {
14717 if (i <= rangestart + 3)
14718 for (; rangestart < i; rangestart++)
14719 put_byte(sv, rangestart);
14721 put_byte(sv, rangestart);
14722 sv_catpvs(sv, "-");
14723 put_byte(sv, i - 1);
14728 sv_catpvs(sv, "]");
14731 } else if (k == CURLY) {
14732 if (OP(o) == CURLYM || OP(o) == CURLYN || OP(o) == CURLYX)
14733 Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* Parenth number */
14734 Perl_sv_catpvf(aTHX_ sv, " {%d,%d}", ARG1(o), ARG2(o));
14736 else if (k == WHILEM && o->flags) /* Ordinal/of */
14737 Perl_sv_catpvf(aTHX_ sv, "[%d/%d]", o->flags & 0xf, o->flags>>4);
14738 else if (k == REF || k == OPEN || k == CLOSE || k == GROUPP || OP(o)==ACCEPT) {
14739 Perl_sv_catpvf(aTHX_ sv, "%d", (int)ARG(o)); /* Parenth number */
14740 if ( RXp_PAREN_NAMES(prog) ) {
14741 if ( k != REF || (OP(o) < NREF)) {
14742 AV *list= MUTABLE_AV(progi->data->data[progi->name_list_idx]);
14743 SV **name= av_fetch(list, ARG(o), 0 );
14745 Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name));
14748 AV *list= MUTABLE_AV(progi->data->data[ progi->name_list_idx ]);
14749 SV *sv_dat= MUTABLE_SV(progi->data->data[ ARG( o ) ]);
14750 I32 *nums=(I32*)SvPVX(sv_dat);
14751 SV **name= av_fetch(list, nums[0], 0 );
14754 for ( n=0; n<SvIVX(sv_dat); n++ ) {
14755 Perl_sv_catpvf(aTHX_ sv, "%s%"IVdf,
14756 (n ? "," : ""), (IV)nums[n]);
14758 Perl_sv_catpvf(aTHX_ sv, " '%"SVf"'", SVfARG(*name));
14762 } else if (k == GOSUB)
14763 Perl_sv_catpvf(aTHX_ sv, "%d[%+d]", (int)ARG(o),(int)ARG2L(o)); /* Paren and offset */
14764 else if (k == VERB) {
14766 Perl_sv_catpvf(aTHX_ sv, ":%"SVf,
14767 SVfARG((MUTABLE_SV(progi->data->data[ ARG( o ) ]))));
14768 } else if (k == LOGICAL)
14769 Perl_sv_catpvf(aTHX_ sv, "[%d]", o->flags); /* 2: embedded, otherwise 1 */
14770 else if (k == ANYOF) {
14771 int i, rangestart = -1;
14772 const U8 flags = ANYOF_FLAGS(o);
14776 if (flags & ANYOF_LOCALE)
14777 sv_catpvs(sv, "{loc}");
14778 if (flags & ANYOF_LOC_FOLD)
14779 sv_catpvs(sv, "{i}");
14780 Perl_sv_catpvf(aTHX_ sv, "[%s", PL_colors[0]);
14781 if (flags & ANYOF_INVERT)
14782 sv_catpvs(sv, "^");
14784 /* output what the standard cp 0-255 bitmap matches */
14785 for (i = 0; i <= 256; i++) {
14786 if (i < 256 && ANYOF_BITMAP_TEST(o,i)) {
14787 if (rangestart == -1)
14789 } else if (rangestart != -1) {
14790 if (i <= rangestart + 3)
14791 for (; rangestart < i; rangestart++)
14792 put_byte(sv, rangestart);
14794 put_byte(sv, rangestart);
14795 sv_catpvs(sv, "-");
14796 put_byte(sv, i - 1);
14803 EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags);
14804 /* output any special charclass tests (used entirely under use locale) */
14805 if (ANYOF_CLASS_TEST_ANY_SET(o))
14806 for (i = 0; i < (int)(sizeof(anyofs)/sizeof(char*)); i++)
14807 if (ANYOF_CLASS_TEST(o,i)) {
14808 sv_catpv(sv, anyofs[i]);
14812 EMIT_ANYOF_TEST_SEPARATOR(do_sep,sv,flags);
14814 if (flags & ANYOF_NON_UTF8_LATIN1_ALL) {
14815 sv_catpvs(sv, "{non-utf8-latin1-all}");
14818 /* output information about the unicode matching */
14819 if (flags & ANYOF_UNICODE_ALL)
14820 sv_catpvs(sv, "{unicode_all}");
14821 else if (ANYOF_NONBITMAP(o))
14822 sv_catpvs(sv, "{unicode}");
14823 if (flags & ANYOF_NONBITMAP_NON_UTF8)
14824 sv_catpvs(sv, "{outside bitmap}");
14826 if (ANYOF_NONBITMAP(o)) {
14827 SV *lv; /* Set if there is something outside the bit map */
14828 SV * const sw = regclass_swash(prog, o, FALSE, &lv, NULL);
14829 bool byte_output = FALSE; /* If something in the bitmap has been
14832 if (lv && lv != &PL_sv_undef) {
14834 U8 s[UTF8_MAXBYTES_CASE+1];
14836 for (i = 0; i <= 256; i++) { /* Look at chars in bitmap */
14837 uvchr_to_utf8(s, i);
14840 && ! ANYOF_BITMAP_TEST(o, i) /* Don't duplicate
14844 && swash_fetch(sw, s, TRUE))
14846 if (rangestart == -1)
14848 } else if (rangestart != -1) {
14849 byte_output = TRUE;
14850 if (i <= rangestart + 3)
14851 for (; rangestart < i; rangestart++) {
14852 put_byte(sv, rangestart);
14855 put_byte(sv, rangestart);
14856 sv_catpvs(sv, "-");
14865 char *s = savesvpv(lv);
14866 char * const origs = s;
14868 while (*s && *s != '\n')
14872 const char * const t = ++s;
14875 sv_catpvs(sv, " ");
14881 /* Truncate very long output */
14882 if (s - origs > 256) {
14883 Perl_sv_catpvf(aTHX_ sv,
14885 (int) (s - origs - 1),
14891 else if (*s == '\t') {
14906 SvREFCNT_dec_NN(lv);
14910 Perl_sv_catpvf(aTHX_ sv, "%s]", PL_colors[1]);
14912 else if (k == POSIXD || k == NPOSIXD) {
14913 U8 index = FLAGS(o) * 2;
14914 if (index > (sizeof(anyofs) / sizeof(anyofs[0]))) {
14915 Perl_sv_catpvf(aTHX_ sv, "[illegal type=%d])", index);
14918 sv_catpv(sv, anyofs[index]);
14921 else if (k == BRANCHJ && (OP(o) == UNLESSM || OP(o) == IFMATCH))
14922 Perl_sv_catpvf(aTHX_ sv, "[%d]", -(o->flags));
14924 PERL_UNUSED_CONTEXT;
14925 PERL_UNUSED_ARG(sv);
14926 PERL_UNUSED_ARG(o);
14927 PERL_UNUSED_ARG(prog);
14928 #endif /* DEBUGGING */
14932 Perl_re_intuit_string(pTHX_ REGEXP * const r)
14933 { /* Assume that RE_INTUIT is set */
14935 struct regexp *const prog = ReANY(r);
14936 GET_RE_DEBUG_FLAGS_DECL;
14938 PERL_ARGS_ASSERT_RE_INTUIT_STRING;
14939 PERL_UNUSED_CONTEXT;
14943 const char * const s = SvPV_nolen_const(prog->check_substr
14944 ? prog->check_substr : prog->check_utf8);
14946 if (!PL_colorset) reginitcolors();
14947 PerlIO_printf(Perl_debug_log,
14948 "%sUsing REx %ssubstr:%s \"%s%.60s%s%s\"\n",
14950 prog->check_substr ? "" : "utf8 ",
14951 PL_colors[5],PL_colors[0],
14954 (strlen(s) > 60 ? "..." : ""));
14957 return prog->check_substr ? prog->check_substr : prog->check_utf8;
14963 handles refcounting and freeing the perl core regexp structure. When
14964 it is necessary to actually free the structure the first thing it
14965 does is call the 'free' method of the regexp_engine associated to
14966 the regexp, allowing the handling of the void *pprivate; member
14967 first. (This routine is not overridable by extensions, which is why
14968 the extensions free is called first.)
14970 See regdupe and regdupe_internal if you change anything here.
14972 #ifndef PERL_IN_XSUB_RE
14974 Perl_pregfree(pTHX_ REGEXP *r)
14980 Perl_pregfree2(pTHX_ REGEXP *rx)
14983 struct regexp *const r = ReANY(rx);
14984 GET_RE_DEBUG_FLAGS_DECL;
14986 PERL_ARGS_ASSERT_PREGFREE2;
14988 if (r->mother_re) {
14989 ReREFCNT_dec(r->mother_re);
14991 CALLREGFREE_PVT(rx); /* free the private data */
14992 SvREFCNT_dec(RXp_PAREN_NAMES(r));
14993 Safefree(r->xpv_len_u.xpvlenu_pv);
14996 SvREFCNT_dec(r->anchored_substr);
14997 SvREFCNT_dec(r->anchored_utf8);
14998 SvREFCNT_dec(r->float_substr);
14999 SvREFCNT_dec(r->float_utf8);
15000 Safefree(r->substrs);
15002 RX_MATCH_COPY_FREE(rx);
15003 #ifdef PERL_ANY_COW
15004 SvREFCNT_dec(r->saved_copy);
15007 SvREFCNT_dec(r->qr_anoncv);
15008 rx->sv_u.svu_rx = 0;
15013 This is a hacky workaround to the structural issue of match results
15014 being stored in the regexp structure which is in turn stored in
15015 PL_curpm/PL_reg_curpm. The problem is that due to qr// the pattern
15016 could be PL_curpm in multiple contexts, and could require multiple
15017 result sets being associated with the pattern simultaneously, such
15018 as when doing a recursive match with (??{$qr})
15020 The solution is to make a lightweight copy of the regexp structure
15021 when a qr// is returned from the code executed by (??{$qr}) this
15022 lightweight copy doesn't actually own any of its data except for
15023 the starp/end and the actual regexp structure itself.
15029 Perl_reg_temp_copy (pTHX_ REGEXP *ret_x, REGEXP *rx)
15031 struct regexp *ret;
15032 struct regexp *const r = ReANY(rx);
15033 const bool islv = ret_x && SvTYPE(ret_x) == SVt_PVLV;
15035 PERL_ARGS_ASSERT_REG_TEMP_COPY;
15038 ret_x = (REGEXP*) newSV_type(SVt_REGEXP);
15040 SvOK_off((SV *)ret_x);
15042 /* For PVLVs, SvANY points to the xpvlv body while sv_u points
15043 to the regexp. (For SVt_REGEXPs, sv_upgrade has already
15044 made both spots point to the same regexp body.) */
15045 REGEXP *temp = (REGEXP *)newSV_type(SVt_REGEXP);
15046 assert(!SvPVX(ret_x));
15047 ret_x->sv_u.svu_rx = temp->sv_any;
15048 temp->sv_any = NULL;
15049 SvFLAGS(temp) = (SvFLAGS(temp) & ~SVTYPEMASK) | SVt_NULL;
15050 SvREFCNT_dec_NN(temp);
15051 /* SvCUR still resides in the xpvlv struct, so the regexp copy-
15052 ing below will not set it. */
15053 SvCUR_set(ret_x, SvCUR(rx));
15056 /* This ensures that SvTHINKFIRST(sv) is true, and hence that
15057 sv_force_normal(sv) is called. */
15059 ret = ReANY(ret_x);
15061 SvFLAGS(ret_x) |= SvUTF8(rx);
15062 /* We share the same string buffer as the original regexp, on which we
15063 hold a reference count, incremented when mother_re is set below.
15064 The string pointer is copied here, being part of the regexp struct.
15066 memcpy(&(ret->xpv_cur), &(r->xpv_cur),
15067 sizeof(regexp) - STRUCT_OFFSET(regexp, xpv_cur));
15069 const I32 npar = r->nparens+1;
15070 Newx(ret->offs, npar, regexp_paren_pair);
15071 Copy(r->offs, ret->offs, npar, regexp_paren_pair);
15074 Newx(ret->substrs, 1, struct reg_substr_data);
15075 StructCopy(r->substrs, ret->substrs, struct reg_substr_data);
15077 SvREFCNT_inc_void(ret->anchored_substr);
15078 SvREFCNT_inc_void(ret->anchored_utf8);
15079 SvREFCNT_inc_void(ret->float_substr);
15080 SvREFCNT_inc_void(ret->float_utf8);
15082 /* check_substr and check_utf8, if non-NULL, point to either their
15083 anchored or float namesakes, and don't hold a second reference. */
15085 RX_MATCH_COPIED_off(ret_x);
15086 #ifdef PERL_ANY_COW
15087 ret->saved_copy = NULL;
15089 ret->mother_re = ReREFCNT_inc(r->mother_re ? r->mother_re : rx);
15090 SvREFCNT_inc_void(ret->qr_anoncv);
15096 /* regfree_internal()
15098 Free the private data in a regexp. This is overloadable by
15099 extensions. Perl takes care of the regexp structure in pregfree(),
15100 this covers the *pprivate pointer which technically perl doesn't
15101 know about, however of course we have to handle the
15102 regexp_internal structure when no extension is in use.
15104 Note this is called before freeing anything in the regexp
15109 Perl_regfree_internal(pTHX_ REGEXP * const rx)
15112 struct regexp *const r = ReANY(rx);
15113 RXi_GET_DECL(r,ri);
15114 GET_RE_DEBUG_FLAGS_DECL;
15116 PERL_ARGS_ASSERT_REGFREE_INTERNAL;
15122 SV *dsv= sv_newmortal();
15123 RE_PV_QUOTED_DECL(s, RX_UTF8(rx),
15124 dsv, RX_PRECOMP(rx), RX_PRELEN(rx), 60);
15125 PerlIO_printf(Perl_debug_log,"%sFreeing REx:%s %s\n",
15126 PL_colors[4],PL_colors[5],s);
15129 #ifdef RE_TRACK_PATTERN_OFFSETS
15131 Safefree(ri->u.offsets); /* 20010421 MJD */
15133 if (ri->code_blocks) {
15135 for (n = 0; n < ri->num_code_blocks; n++)
15136 SvREFCNT_dec(ri->code_blocks[n].src_regex);
15137 Safefree(ri->code_blocks);
15141 int n = ri->data->count;
15144 /* If you add a ->what type here, update the comment in regcomp.h */
15145 switch (ri->data->what[n]) {
15151 SvREFCNT_dec(MUTABLE_SV(ri->data->data[n]));
15154 Safefree(ri->data->data[n]);
15160 { /* Aho Corasick add-on structure for a trie node.
15161 Used in stclass optimization only */
15163 reg_ac_data *aho=(reg_ac_data*)ri->data->data[n];
15165 refcount = --aho->refcount;
15168 PerlMemShared_free(aho->states);
15169 PerlMemShared_free(aho->fail);
15170 /* do this last!!!! */
15171 PerlMemShared_free(ri->data->data[n]);
15172 PerlMemShared_free(ri->regstclass);
15178 /* trie structure. */
15180 reg_trie_data *trie=(reg_trie_data*)ri->data->data[n];
15182 refcount = --trie->refcount;
15185 PerlMemShared_free(trie->charmap);
15186 PerlMemShared_free(trie->states);
15187 PerlMemShared_free(trie->trans);
15189 PerlMemShared_free(trie->bitmap);
15191 PerlMemShared_free(trie->jump);
15192 PerlMemShared_free(trie->wordinfo);
15193 /* do this last!!!! */
15194 PerlMemShared_free(ri->data->data[n]);
15199 Perl_croak(aTHX_ "panic: regfree data code '%c'", ri->data->what[n]);
15202 Safefree(ri->data->what);
15203 Safefree(ri->data);
15209 #define av_dup_inc(s,t) MUTABLE_AV(sv_dup_inc((const SV *)s,t))
15210 #define hv_dup_inc(s,t) MUTABLE_HV(sv_dup_inc((const SV *)s,t))
15211 #define SAVEPVN(p,n) ((p) ? savepvn(p,n) : NULL)
15214 re_dup - duplicate a regexp.
15216 This routine is expected to clone a given regexp structure. It is only
15217 compiled under USE_ITHREADS.
15219 After all of the core data stored in struct regexp is duplicated
15220 the regexp_engine.dupe method is used to copy any private data
15221 stored in the *pprivate pointer. This allows extensions to handle
15222 any duplication it needs to do.
15224 See pregfree() and regfree_internal() if you change anything here.
15226 #if defined(USE_ITHREADS)
15227 #ifndef PERL_IN_XSUB_RE
15229 Perl_re_dup_guts(pTHX_ const REGEXP *sstr, REGEXP *dstr, CLONE_PARAMS *param)
15233 const struct regexp *r = ReANY(sstr);
15234 struct regexp *ret = ReANY(dstr);
15236 PERL_ARGS_ASSERT_RE_DUP_GUTS;
15238 npar = r->nparens+1;
15239 Newx(ret->offs, npar, regexp_paren_pair);
15240 Copy(r->offs, ret->offs, npar, regexp_paren_pair);
15242 if (ret->substrs) {
15243 /* Do it this way to avoid reading from *r after the StructCopy().
15244 That way, if any of the sv_dup_inc()s dislodge *r from the L1
15245 cache, it doesn't matter. */
15246 const bool anchored = r->check_substr
15247 ? r->check_substr == r->anchored_substr
15248 : r->check_utf8 == r->anchored_utf8;
15249 Newx(ret->substrs, 1, struct reg_substr_data);
15250 StructCopy(r->substrs, ret->substrs, struct reg_substr_data);
15252 ret->anchored_substr = sv_dup_inc(ret->anchored_substr, param);
15253 ret->anchored_utf8 = sv_dup_inc(ret->anchored_utf8, param);
15254 ret->float_substr = sv_dup_inc(ret->float_substr, param);
15255 ret->float_utf8 = sv_dup_inc(ret->float_utf8, param);
15257 /* check_substr and check_utf8, if non-NULL, point to either their
15258 anchored or float namesakes, and don't hold a second reference. */
15260 if (ret->check_substr) {
15262 assert(r->check_utf8 == r->anchored_utf8);
15263 ret->check_substr = ret->anchored_substr;
15264 ret->check_utf8 = ret->anchored_utf8;
15266 assert(r->check_substr == r->float_substr);
15267 assert(r->check_utf8 == r->float_utf8);
15268 ret->check_substr = ret->float_substr;
15269 ret->check_utf8 = ret->float_utf8;
15271 } else if (ret->check_utf8) {
15273 ret->check_utf8 = ret->anchored_utf8;
15275 ret->check_utf8 = ret->float_utf8;
15280 RXp_PAREN_NAMES(ret) = hv_dup_inc(RXp_PAREN_NAMES(ret), param);
15281 ret->qr_anoncv = MUTABLE_CV(sv_dup_inc((const SV *)ret->qr_anoncv, param));
15284 RXi_SET(ret,CALLREGDUPE_PVT(dstr,param));
15286 if (RX_MATCH_COPIED(dstr))
15287 ret->subbeg = SAVEPVN(ret->subbeg, ret->sublen);
15289 ret->subbeg = NULL;
15290 #ifdef PERL_ANY_COW
15291 ret->saved_copy = NULL;
15294 /* Whether mother_re be set or no, we need to copy the string. We
15295 cannot refrain from copying it when the storage points directly to
15296 our mother regexp, because that's
15297 1: a buffer in a different thread
15298 2: something we no longer hold a reference on
15299 so we need to copy it locally. */
15300 RX_WRAPPED(dstr) = SAVEPVN(RX_WRAPPED(sstr), SvCUR(sstr)+1);
15301 ret->mother_re = NULL;
15304 #endif /* PERL_IN_XSUB_RE */
15309 This is the internal complement to regdupe() which is used to copy
15310 the structure pointed to by the *pprivate pointer in the regexp.
15311 This is the core version of the extension overridable cloning hook.
15312 The regexp structure being duplicated will be copied by perl prior
15313 to this and will be provided as the regexp *r argument, however
15314 with the /old/ structures pprivate pointer value. Thus this routine
15315 may override any copying normally done by perl.
15317 It returns a pointer to the new regexp_internal structure.
15321 Perl_regdupe_internal(pTHX_ REGEXP * const rx, CLONE_PARAMS *param)
15324 struct regexp *const r = ReANY(rx);
15325 regexp_internal *reti;
15327 RXi_GET_DECL(r,ri);
15329 PERL_ARGS_ASSERT_REGDUPE_INTERNAL;
15333 Newxc(reti, sizeof(regexp_internal) + len*sizeof(regnode), char, regexp_internal);
15334 Copy(ri->program, reti->program, len+1, regnode);
15336 reti->num_code_blocks = ri->num_code_blocks;
15337 if (ri->code_blocks) {
15339 Newxc(reti->code_blocks, ri->num_code_blocks, struct reg_code_block,
15340 struct reg_code_block);
15341 Copy(ri->code_blocks, reti->code_blocks, ri->num_code_blocks,
15342 struct reg_code_block);
15343 for (n = 0; n < ri->num_code_blocks; n++)
15344 reti->code_blocks[n].src_regex = (REGEXP*)
15345 sv_dup_inc((SV*)(ri->code_blocks[n].src_regex), param);
15348 reti->code_blocks = NULL;
15350 reti->regstclass = NULL;
15353 struct reg_data *d;
15354 const int count = ri->data->count;
15357 Newxc(d, sizeof(struct reg_data) + count*sizeof(void *),
15358 char, struct reg_data);
15359 Newx(d->what, count, U8);
15362 for (i = 0; i < count; i++) {
15363 d->what[i] = ri->data->what[i];
15364 switch (d->what[i]) {
15365 /* see also regcomp.h and regfree_internal() */
15366 case 'a': /* actually an AV, but the dup function is identical. */
15370 case 'u': /* actually an HV, but the dup function is identical. */
15371 d->data[i] = sv_dup_inc((const SV *)ri->data->data[i], param);
15374 /* This is cheating. */
15375 Newx(d->data[i], 1, struct regnode_charclass_class);
15376 StructCopy(ri->data->data[i], d->data[i],
15377 struct regnode_charclass_class);
15378 reti->regstclass = (regnode*)d->data[i];
15381 /* Trie stclasses are readonly and can thus be shared
15382 * without duplication. We free the stclass in pregfree
15383 * when the corresponding reg_ac_data struct is freed.
15385 reti->regstclass= ri->regstclass;
15389 ((reg_trie_data*)ri->data->data[i])->refcount++;
15394 d->data[i] = ri->data->data[i];
15397 Perl_croak(aTHX_ "panic: re_dup unknown data code '%c'", ri->data->what[i]);
15406 reti->name_list_idx = ri->name_list_idx;
15408 #ifdef RE_TRACK_PATTERN_OFFSETS
15409 if (ri->u.offsets) {
15410 Newx(reti->u.offsets, 2*len+1, U32);
15411 Copy(ri->u.offsets, reti->u.offsets, 2*len+1, U32);
15414 SetProgLen(reti,len);
15417 return (void*)reti;
15420 #endif /* USE_ITHREADS */
15422 #ifndef PERL_IN_XSUB_RE
15425 - regnext - dig the "next" pointer out of a node
15428 Perl_regnext(pTHX_ regnode *p)
15436 if (OP(p) > REGNODE_MAX) { /* regnode.type is unsigned */
15437 Perl_croak(aTHX_ "Corrupted regexp opcode %d > %d", (int)OP(p), (int)REGNODE_MAX);
15440 offset = (reg_off_by_arg[OP(p)] ? ARG(p) : NEXT_OFF(p));
15449 S_re_croak2(pTHX_ const char* pat1,const char* pat2,...)
15452 STRLEN l1 = strlen(pat1);
15453 STRLEN l2 = strlen(pat2);
15456 const char *message;
15458 PERL_ARGS_ASSERT_RE_CROAK2;
15464 Copy(pat1, buf, l1 , char);
15465 Copy(pat2, buf + l1, l2 , char);
15466 buf[l1 + l2] = '\n';
15467 buf[l1 + l2 + 1] = '\0';
15469 /* ANSI variant takes additional second argument */
15470 va_start(args, pat2);
15474 msv = vmess(buf, &args);
15476 message = SvPV_const(msv,l1);
15479 Copy(message, buf, l1 , char);
15480 buf[l1-1] = '\0'; /* Overwrite \n */
15481 Perl_croak(aTHX_ "%s", buf);
15484 /* XXX Here's a total kludge. But we need to re-enter for swash routines. */
15486 #ifndef PERL_IN_XSUB_RE
15488 Perl_save_re_context(pTHX)
15492 /* Save $1..$n (#18107: UTF-8 s/(\w+)/uc($1)/e); AMS 20021106. */
15494 const REGEXP * const rx = PM_GETRE(PL_curpm);
15497 for (i = 1; i <= RX_NPARENS(rx); i++) {
15498 char digits[TYPE_CHARS(long)];
15499 const STRLEN len = my_snprintf(digits, sizeof(digits), "%lu", (long)i);
15500 GV *const *const gvp
15501 = (GV**)hv_fetch(PL_defstash, digits, len, 0);
15504 GV * const gv = *gvp;
15505 if (SvTYPE(gv) == SVt_PVGV && GvSV(gv))
15517 S_put_byte(pTHX_ SV *sv, int c)
15519 PERL_ARGS_ASSERT_PUT_BYTE;
15521 /* Our definition of isPRINT() ignores locales, so only bytes that are
15522 not part of UTF-8 are considered printable. I assume that the same
15523 holds for UTF-EBCDIC.
15524 Also, code point 255 is not printable in either (it's E0 in EBCDIC,
15525 which Wikipedia says:
15527 EO, or Eight Ones, is an 8-bit EBCDIC character code represented as all
15528 ones (binary 1111 1111, hexadecimal FF). It is similar, but not
15529 identical, to the ASCII delete (DEL) or rubout control character. ...
15530 it is typically mapped to hexadecimal code 9F, in order to provide a
15531 unique character mapping in both directions)
15533 So the old condition can be simplified to !isPRINT(c) */
15536 Perl_sv_catpvf(aTHX_ sv, "\\x%02x", c);
15539 Perl_sv_catpvf(aTHX_ sv, "\\x{%x}", c);
15543 const char string = c;
15544 if (c == '-' || c == ']' || c == '\\' || c == '^')
15545 sv_catpvs(sv, "\\");
15546 sv_catpvn(sv, &string, 1);
15551 #define CLEAR_OPTSTART \
15552 if (optstart) STMT_START { \
15553 DEBUG_OPTIMISE_r(PerlIO_printf(Perl_debug_log, " (%"IVdf" nodes)\n", (IV)(node - optstart))); \
15557 #define DUMPUNTIL(b,e) CLEAR_OPTSTART; node=dumpuntil(r,start,(b),(e),last,sv,indent+1,depth+1);
15559 STATIC const regnode *
15560 S_dumpuntil(pTHX_ const regexp *r, const regnode *start, const regnode *node,
15561 const regnode *last, const regnode *plast,
15562 SV* sv, I32 indent, U32 depth)
15565 U8 op = PSEUDO; /* Arbitrary non-END op. */
15566 const regnode *next;
15567 const regnode *optstart= NULL;
15569 RXi_GET_DECL(r,ri);
15570 GET_RE_DEBUG_FLAGS_DECL;
15572 PERL_ARGS_ASSERT_DUMPUNTIL;
15574 #ifdef DEBUG_DUMPUNTIL
15575 PerlIO_printf(Perl_debug_log, "--- %d : %d - %d - %d\n",indent,node-start,
15576 last ? last-start : 0,plast ? plast-start : 0);
15579 if (plast && plast < last)
15582 while (PL_regkind[op] != END && (!last || node < last)) {
15583 /* While that wasn't END last time... */
15586 if (op == CLOSE || op == WHILEM)
15588 next = regnext((regnode *)node);
15591 if (OP(node) == OPTIMIZED) {
15592 if (!optstart && RE_DEBUG_FLAG(RE_DEBUG_COMPILE_OPTIMISE))
15599 regprop(r, sv, node);
15600 PerlIO_printf(Perl_debug_log, "%4"IVdf":%*s%s", (IV)(node - start),
15601 (int)(2*indent + 1), "", SvPVX_const(sv));
15603 if (OP(node) != OPTIMIZED) {
15604 if (next == NULL) /* Next ptr. */
15605 PerlIO_printf(Perl_debug_log, " (0)");
15606 else if (PL_regkind[(U8)op] == BRANCH && PL_regkind[OP(next)] != BRANCH )
15607 PerlIO_printf(Perl_debug_log, " (FAIL)");
15609 PerlIO_printf(Perl_debug_log, " (%"IVdf")", (IV)(next - start));
15610 (void)PerlIO_putc(Perl_debug_log, '\n');
15614 if (PL_regkind[(U8)op] == BRANCHJ) {
15617 const regnode *nnode = (OP(next) == LONGJMP
15618 ? regnext((regnode *)next)
15620 if (last && nnode > last)
15622 DUMPUNTIL(NEXTOPER(NEXTOPER(node)), nnode);
15625 else if (PL_regkind[(U8)op] == BRANCH) {
15627 DUMPUNTIL(NEXTOPER(node), next);
15629 else if ( PL_regkind[(U8)op] == TRIE ) {
15630 const regnode *this_trie = node;
15631 const char op = OP(node);
15632 const U32 n = ARG(node);
15633 const reg_ac_data * const ac = op>=AHOCORASICK ?
15634 (reg_ac_data *)ri->data->data[n] :
15636 const reg_trie_data * const trie =
15637 (reg_trie_data*)ri->data->data[op<AHOCORASICK ? n : ac->trie];
15639 AV *const trie_words = MUTABLE_AV(ri->data->data[n + TRIE_WORDS_OFFSET]);
15641 const regnode *nextbranch= NULL;
15644 for (word_idx= 0; word_idx < (I32)trie->wordcount; word_idx++) {
15645 SV ** const elem_ptr = av_fetch(trie_words,word_idx,0);
15647 PerlIO_printf(Perl_debug_log, "%*s%s ",
15648 (int)(2*(indent+3)), "",
15649 elem_ptr ? pv_pretty(sv, SvPV_nolen_const(*elem_ptr), SvCUR(*elem_ptr), 60,
15650 PL_colors[0], PL_colors[1],
15651 (SvUTF8(*elem_ptr) ? PERL_PV_ESCAPE_UNI : 0) |
15652 PERL_PV_PRETTY_ELLIPSES |
15653 PERL_PV_PRETTY_LTGT
15658 U16 dist= trie->jump[word_idx+1];
15659 PerlIO_printf(Perl_debug_log, "(%"UVuf")\n",
15660 (UV)((dist ? this_trie + dist : next) - start));
15663 nextbranch= this_trie + trie->jump[0];
15664 DUMPUNTIL(this_trie + dist, nextbranch);
15666 if (nextbranch && PL_regkind[OP(nextbranch)]==BRANCH)
15667 nextbranch= regnext((regnode *)nextbranch);
15669 PerlIO_printf(Perl_debug_log, "\n");
15672 if (last && next > last)
15677 else if ( op == CURLY ) { /* "next" might be very big: optimizer */
15678 DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS,
15679 NEXTOPER(node) + EXTRA_STEP_2ARGS + 1);
15681 else if (PL_regkind[(U8)op] == CURLY && op != CURLYX) {
15683 DUMPUNTIL(NEXTOPER(node) + EXTRA_STEP_2ARGS, next);
15685 else if ( op == PLUS || op == STAR) {
15686 DUMPUNTIL(NEXTOPER(node), NEXTOPER(node) + 1);
15688 else if (PL_regkind[(U8)op] == ANYOF) {
15689 /* arglen 1 + class block */
15690 node += 1 + ((ANYOF_FLAGS(node) & ANYOF_CLASS)
15691 ? ANYOF_CLASS_SKIP : ANYOF_SKIP);
15692 node = NEXTOPER(node);
15694 else if (PL_regkind[(U8)op] == EXACT) {
15695 /* Literal string, where present. */
15696 node += NODE_SZ_STR(node) - 1;
15697 node = NEXTOPER(node);
15700 node = NEXTOPER(node);
15701 node += regarglen[(U8)op];
15703 if (op == CURLYX || op == OPEN)
15707 #ifdef DEBUG_DUMPUNTIL
15708 PerlIO_printf(Perl_debug_log, "--- %d\n", (int)indent);
15713 #endif /* DEBUGGING */
15717 * c-indentation-style: bsd
15718 * c-basic-offset: 4
15719 * indent-tabs-mode: nil
15722 * ex: set ts=8 sts=4 sw=4 et: