3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
6 # All text after a hash (#) is considered a comment and will be ignored
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
17 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
18 # by quotes) that should identify the project.
22 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
23 # This could be handy for archiving the generated documentation or
24 # if some version control system is used.
28 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
29 # base path where the generated documentation will be put.
30 # If a relative path is entered, it will be relative to the location
31 # where doxygen was started. If left blank the current directory will be used.
33 OUTPUT_DIRECTORY = ../doc/api
35 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
36 # 4096 sub-directories (in 2 levels) under the output directory of each output
37 # format and will distribute the generated files over these directories.
38 # Enabling this option can be useful when feeding doxygen a huge amount of
39 # source files, where putting all generated files in the same directory would
40 # otherwise cause performance problems for the file system.
44 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
45 # documentation generated by doxygen is written. Doxygen will use this
46 # information to generate all constant output in the proper language.
47 # The default language is English, other supported languages are:
48 # Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish,
49 # Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese,
50 # Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian,
51 # Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish,
52 # Swedish, and Ukrainian.
54 OUTPUT_LANGUAGE = English
56 # This tag can be used to specify the encoding used in the generated output.
57 # The encoding is not always determined by the language that is chosen,
58 # but also whether or not the output is meant for Windows or non-Windows users.
59 # In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES
60 # forces the Windows encoding (this is the default for the Windows binary),
61 # whereas setting the tag to NO uses a Unix-style encoding (the default for
62 # all platforms other than Windows).
64 USE_WINDOWS_ENCODING = NO
66 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
67 # include brief member descriptions after the members that are listed in
68 # the file and class documentation (similar to JavaDoc).
69 # Set to NO to disable this.
71 BRIEF_MEMBER_DESC = YES
73 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
74 # the brief description of a member or function before the detailed description.
75 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
76 # brief descriptions will be completely suppressed.
80 # This tag implements a quasi-intelligent brief description abbreviator
81 # that is used to form the text in various listings. Each string
82 # in this list, if found as the leading text of the brief description, will be
83 # stripped from the text and the result after processing the whole list, is
84 # used as the annotated text. Otherwise, the brief description is used as-is.
85 # If left blank, the following values are used ("$name" is automatically
86 # replaced with the name of the entity): "The $name class" "The $name widget"
87 # "The $name file" "is" "provides" "specifies" "contains"
88 # "represents" "a" "an" "the"
92 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
93 # Doxygen will generate a detailed section even if there is only a brief
96 ALWAYS_DETAILED_SEC = NO
98 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
99 # inherited members of a class in the documentation of that class as if those
100 # members were ordinary class members. Constructors, destructors and assignment
101 # operators of the base classes will not be shown.
103 INLINE_INHERITED_MEMB = NO
105 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
106 # path before files name in the file list and in the header files. If set
107 # to NO the shortest path that makes the file name unique will be used.
111 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
112 # can be used to strip a user-defined part of the path. Stripping is
113 # only done if one of the specified strings matches the left-hand part of
114 # the path. The tag can be used to show relative paths in the file list.
115 # If left blank the directory from which doxygen is run is used as the
120 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
121 # the path mentioned in the documentation of a class, which tells
122 # the reader which header file to include in order to use a class.
123 # If left blank only the name of the header file containing the class
124 # definition is used. Otherwise one should specify the include paths that
125 # are normally passed to the compiler using the -I flag.
127 STRIP_FROM_INC_PATH =
129 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
130 # (but less readable) file names. This can be useful is your file systems
131 # doesn't support long names like on DOS, Mac, or CD-ROM.
135 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
136 # will interpret the first line (until the first dot) of a JavaDoc-style
137 # comment as the brief description. If set to NO, the JavaDoc
138 # comments will behave just like the Qt-style comments (thus requiring an
139 # explicit @brief command for a brief description.
141 JAVADOC_AUTOBRIEF = NO
143 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
144 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
145 # comments) as a brief description. This used to be the default behaviour.
146 # The new default is to treat a multi-line C++ comment block as a detailed
147 # description. Set this tag to YES if you prefer the old behaviour instead.
149 MULTILINE_CPP_IS_BRIEF = NO
151 # If the DETAILS_AT_TOP tag is set to YES then Doxygen
152 # will output the detailed description near the top, like JavaDoc.
153 # If set to NO, the detailed description appears after the member
158 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159 # member inherits the documentation from any documented member that it
164 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165 # a new page for each member. If set to NO, the documentation of a member will
166 # be part of the file/class/namespace that contains it.
168 SEPARATE_MEMBER_PAGES = NO
170 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
171 # Doxygen uses this value to replace tabs by spaces in code fragments.
175 # This tag can be used to specify a number of aliases that acts
176 # as commands in the documentation. An alias has the form "name=value".
177 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
178 # put the command \sideeffect (or @sideeffect) in the documentation, which
179 # will result in a user-defined paragraph with heading "Side Effects:".
180 # You can put \n's in the value part of an alias to insert newlines.
182 ALIASES = "value=\li \a"
184 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185 # sources only. Doxygen will then generate output that is more tailored for C.
186 # For instance, some of the names that are used will be different. The list
187 # of all members will be omitted, etc.
189 OPTIMIZE_OUTPUT_FOR_C = NO
191 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192 # sources only. Doxygen will then generate output that is more tailored for Java.
193 # For instance, namespaces will be presented as packages, qualified scopes
194 # will look different, etc.
196 OPTIMIZE_OUTPUT_JAVA = NO
198 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to
199 # include (a tag file for) the STL sources as input, then you should
200 # set this tag to YES in order to let doxygen match functions declarations and
201 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
202 # func(std::string) {}). This also make the inheritance and collaboration
203 # diagrams that involve STL classes more complete and accurate.
205 BUILTIN_STL_SUPPORT = NO
207 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
208 # tag is set to YES, then doxygen will reuse the documentation of the first
209 # member in the group (if any) for the other members of the group. By default
210 # all members of a group must be documented explicitly.
212 DISTRIBUTE_GROUP_DOC = NO
214 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
215 # the same type (for instance a group of public functions) to be put as a
216 # subgroup of that type (e.g. under the Public Functions section). Set it to
217 # NO to prevent subgrouping. Alternatively, this can be done per class using
218 # the \nosubgrouping command.
222 #---------------------------------------------------------------------------
223 # Build related configuration options
224 #---------------------------------------------------------------------------
226 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
227 # documentation are documented, even if no documentation was available.
228 # Private class members and static file members will be hidden unless
229 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
233 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
234 # will be included in the documentation.
238 # If the EXTRACT_STATIC tag is set to YES all static members of a file
239 # will be included in the documentation.
243 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
244 # defined locally in source files will be included in the documentation.
245 # If set to NO only classes defined in header files are included.
247 EXTRACT_LOCAL_CLASSES = NO
249 # This flag is only useful for Objective-C code. When set to YES local
250 # methods, which are defined in the implementation section but not in
251 # the interface are included in the documentation.
252 # If set to NO (the default) only methods in the interface are included.
254 EXTRACT_LOCAL_METHODS = NO
256 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
257 # undocumented members of documented classes, files or namespaces.
258 # If set to NO (the default) these members will be included in the
259 # various overviews, but no documentation section is generated.
260 # This option has no effect if EXTRACT_ALL is enabled.
262 HIDE_UNDOC_MEMBERS = NO
264 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
265 # undocumented classes that are normally visible in the class hierarchy.
266 # If set to NO (the default) these classes will be included in the various
267 # overviews. This option has no effect if EXTRACT_ALL is enabled.
269 HIDE_UNDOC_CLASSES = YES
271 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
272 # friend (class|struct|union) declarations.
273 # If set to NO (the default) these declarations will be included in the
276 HIDE_FRIEND_COMPOUNDS = YES
278 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
279 # documentation blocks found inside the body of a function.
280 # If set to NO (the default) these blocks will be appended to the
281 # function's detailed documentation block.
283 HIDE_IN_BODY_DOCS = NO
285 # The INTERNAL_DOCS tag determines if documentation
286 # that is typed after a \internal command is included. If the tag is set
287 # to NO (the default) then the documentation will be excluded.
288 # Set it to YES to include the internal documentation.
292 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
293 # file names in lower-case letters. If set to YES upper-case letters are also
294 # allowed. This is useful if you have classes or files whose names only differ
295 # in case and if your file system supports case sensitive file names. Windows
296 # and Mac users are advised to set this option to NO.
298 CASE_SENSE_NAMES = YES
300 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
301 # will show members with their full class and namespace scopes in the
302 # documentation. If set to YES the scope will be hidden.
304 HIDE_SCOPE_NAMES = NO
306 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
307 # will put a list of the files that are included by a file in the documentation
310 SHOW_INCLUDE_FILES = YES
312 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
313 # is inserted in the documentation for inline members.
317 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
318 # will sort the (detailed) documentation of file and class members
319 # alphabetically by member name. If set to NO the members will appear in
322 SORT_MEMBER_DOCS = NO
324 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
325 # brief documentation of file, namespace and class members alphabetically
326 # by member name. If set to NO (the default) the members will appear in
329 SORT_BRIEF_DOCS = YES
331 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
332 # sorted by fully-qualified names, including namespaces. If set to
333 # NO (the default), the class list will be sorted only by class name,
334 # not including the namespace part.
335 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
336 # Note: This option applies only to the class list, not to the
339 SORT_BY_SCOPE_NAME = NO
341 # The GENERATE_TODOLIST tag can be used to enable (YES) or
342 # disable (NO) the todo list. This list is created by putting \todo
343 # commands in the documentation.
345 GENERATE_TODOLIST = YES
347 # The GENERATE_TESTLIST tag can be used to enable (YES) or
348 # disable (NO) the test list. This list is created by putting \test
349 # commands in the documentation.
351 GENERATE_TESTLIST = YES
353 # The GENERATE_BUGLIST tag can be used to enable (YES) or
354 # disable (NO) the bug list. This list is created by putting \bug
355 # commands in the documentation.
357 GENERATE_BUGLIST = YES
359 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
360 # disable (NO) the deprecated list. This list is created by putting
361 # \deprecated commands in the documentation.
363 GENERATE_DEPRECATEDLIST= YES
365 # The ENABLED_SECTIONS tag can be used to enable conditional
366 # documentation sections, marked by \if sectionname ... \endif.
370 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
371 # the initial value of a variable or define consists of for it to appear in
372 # the documentation. If the initializer consists of more lines than specified
373 # here it will be hidden. Use a value of 0 to hide initializers completely.
374 # The appearance of the initializer of individual variables and defines in the
375 # documentation can be controlled using \showinitializer or \hideinitializer
376 # command in the documentation regardless of this setting.
378 MAX_INITIALIZER_LINES = 30
380 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
381 # at the bottom of the documentation of classes and structs. If set to YES the
382 # list will mention the files that were used to generate the documentation.
384 SHOW_USED_FILES = YES
386 # If the sources in your project are distributed over multiple directories
387 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
388 # in the documentation. The default is NO.
390 SHOW_DIRECTORIES = NO
392 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
393 # doxygen should invoke to get the current version for each file (typically from the
394 # version control system). Doxygen will invoke the program by executing (via
395 # popen()) the command <command> <input-file>, where <command> is the value of
396 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
397 # provided by doxygen. Whatever the program writes to standard output
398 # is used as the file version. See the manual for examples.
400 FILE_VERSION_FILTER =
402 #---------------------------------------------------------------------------
403 # configuration options related to warning and progress messages
404 #---------------------------------------------------------------------------
406 # The QUIET tag can be used to turn on/off the messages that are generated
407 # by doxygen. Possible values are YES and NO. If left blank NO is used.
411 # The WARNINGS tag can be used to turn on/off the warning messages that are
412 # generated by doxygen. Possible values are YES and NO. If left blank
417 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
418 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
419 # automatically be disabled.
421 WARN_IF_UNDOCUMENTED = YES
423 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
424 # potential errors in the documentation, such as not documenting some
425 # parameters in a documented function, or documenting parameters that
426 # don't exist or using markup commands wrongly.
428 WARN_IF_DOC_ERROR = YES
430 # This WARN_NO_PARAMDOC option can be abled to get warnings for
431 # functions that are documented, but have no documentation for their parameters
432 # or return value. If set to NO (the default) doxygen will only warn about
433 # wrong or incomplete parameter documentation, but not about the absence of
436 WARN_NO_PARAMDOC = NO
438 # The WARN_FORMAT tag determines the format of the warning messages that
439 # doxygen can produce. The string should contain the $file, $line, and $text
440 # tags, which will be replaced by the file and line number from which the
441 # warning originated and the warning text. Optionally the format may contain
442 # $version, which will be replaced by the version of the file (if it could
443 # be obtained via FILE_VERSION_FILTER)
447 # The WARN_LOGFILE tag can be used to specify a file to which warning
448 # and error messages should be written. If left blank the output is written
453 #---------------------------------------------------------------------------
454 # configuration options related to the input files
455 #---------------------------------------------------------------------------
457 # The INPUT tag can be used to specify the files and/or directories that contain
458 # documented source files. You may enter file names like "myfile.cpp" or
459 # directories like "/usr/src/myproject". Separate the files or directories
464 # If the value of the INPUT tag contains directories, you can use the
465 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
466 # and *.h) to filter out the source-files in the directories. If left
467 # blank the following patterns are tested:
468 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
469 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py
471 FILE_PATTERNS = *.cpp \
474 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
475 # should be searched for input files as well. Possible values are YES and NO.
476 # If left blank NO is used.
480 # The EXCLUDE tag can be used to specify files and/or directories that should
481 # excluded from the INPUT source files. This way you can easily exclude a
482 # subdirectory from a directory tree whose root is specified with the INPUT tag.
484 EXCLUDE = ./selftests
486 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
487 # directories that are symbolic links (a Unix filesystem feature) are excluded
490 EXCLUDE_SYMLINKS = NO
492 # If the value of the INPUT tag contains directories, you can use the
493 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
494 # certain files from those directories. Note that the wildcards are matched
495 # against the file with absolute path, so to exclude all test directories
496 # for example use the pattern */test/*
498 EXCLUDE_PATTERNS = Makefile.* \
518 # The EXAMPLE_PATH tag can be used to specify one or more files or
519 # directories that contain example code fragments that are included (see
520 # the \include command).
524 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
525 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
526 # and *.h) to filter out the source-files in the directories. If left
527 # blank all files are included.
531 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
532 # searched for input files to be used with the \include or \dontinclude
533 # commands irrespective of the value of the RECURSIVE tag.
534 # Possible values are YES and NO. If left blank NO is used.
536 EXAMPLE_RECURSIVE = NO
538 # The IMAGE_PATH tag can be used to specify one or more files or
539 # directories that contain image that are included in the documentation (see
540 # the \image command).
544 # The INPUT_FILTER tag can be used to specify a program that doxygen should
545 # invoke to filter for each input file. Doxygen will invoke the filter program
546 # by executing (via popen()) the command <filter> <input-file>, where <filter>
547 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
548 # input file. Doxygen will then use the output that the filter program writes
549 # to standard output. If FILTER_PATTERNS is specified, this tag will be
554 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
555 # basis. Doxygen will compare the file name with each pattern and apply the
556 # filter if there is a match. The filters are a list of the form:
557 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
558 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
559 # is applied to all files.
563 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
564 # INPUT_FILTER) will be used to filter the input files when producing source
565 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
567 FILTER_SOURCE_FILES = NO
569 #---------------------------------------------------------------------------
570 # configuration options related to source browsing
571 #---------------------------------------------------------------------------
573 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
574 # be generated. Documented entities will be cross-referenced with these sources.
575 # Note: To get rid of all source code in the generated output, make sure also
576 # VERBATIM_HEADERS is set to NO.
580 # Setting the INLINE_SOURCES tag to YES will include the body
581 # of functions and classes directly in the documentation.
585 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
586 # doxygen to hide any special comment blocks from generated source code
587 # fragments. Normal C and C++ comments will always remain visible.
589 STRIP_CODE_COMMENTS = YES
591 # If the REFERENCED_BY_RELATION tag is set to YES (the default)
592 # then for each documented function all documented
593 # functions referencing it will be listed.
595 REFERENCED_BY_RELATION = YES
597 # If the REFERENCES_RELATION tag is set to YES (the default)
598 # then for each documented function all documented entities
599 # called/used by that function will be listed.
601 REFERENCES_RELATION = YES
603 # If the USE_HTAGS tag is set to YES then the references to source code
604 # will point to the HTML generated by the htags(1) tool instead of doxygen
605 # built-in source browser. The htags tool is part of GNU's global source
606 # tagging system (see http://www.gnu.org/software/global/global.html). You
607 # will need version 4.8.6 or higher.
611 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
612 # will generate a verbatim copy of the header file for each class for
613 # which an include is specified. Set to NO to disable this.
615 VERBATIM_HEADERS = YES
617 #---------------------------------------------------------------------------
618 # configuration options related to the alphabetical class index
619 #---------------------------------------------------------------------------
621 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
622 # of all compounds will be generated. Enable this if the project
623 # contains a lot of classes, structs, unions or interfaces.
625 ALPHABETICAL_INDEX = YES
627 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
628 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
629 # in which this list will be split (can be a number in the range [1..20])
631 COLS_IN_ALPHA_INDEX = 5
633 # In case all classes in a project start with a common prefix, all
634 # classes will be put under the same header in the alphabetical index.
635 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
636 # should be ignored while generating the index headers.
638 IGNORE_PREFIX = QDBus
640 #---------------------------------------------------------------------------
641 # configuration options related to the HTML output
642 #---------------------------------------------------------------------------
644 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
645 # generate HTML output.
649 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
650 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
651 # put in front of it. If left blank `html' will be used as the default path.
655 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
656 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
657 # doxygen will generate files with .html extension.
659 HTML_FILE_EXTENSION = .html
661 # The HTML_HEADER tag can be used to specify a personal HTML header for
662 # each generated HTML page. If it is left blank doxygen will generate a
667 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
668 # each generated HTML page. If it is left blank doxygen will generate a
673 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
674 # style sheet that is used by each HTML page. It can be used to
675 # fine-tune the look of the HTML output. If the tag is left blank doxygen
676 # will generate a default style sheet. Note that doxygen will try to copy
677 # the style sheet file to the HTML output directory, so don't put your own
678 # stylesheet in the HTML output directory as well, or it will be erased!
682 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
683 # files or namespaces will be aligned in HTML using tables. If set to
684 # NO a bullet list will be used.
686 HTML_ALIGN_MEMBERS = YES
688 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
689 # will be generated that can be used as input for tools like the
690 # Microsoft HTML help workshop to generate a compressed HTML help file (.chm)
691 # of the generated HTML documentation.
693 GENERATE_HTMLHELP = NO
695 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
696 # be used to specify the file name of the resulting .chm file. You
697 # can add a path in front of the file if the result should not be
698 # written to the html output directory.
702 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
703 # be used to specify the location (absolute path including file name) of
704 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
705 # the HTML help compiler on the generated index.hhp.
709 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
710 # controls if a separate .chi index file is generated (YES) or that
711 # it should be included in the master .chm file (NO).
715 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
716 # controls whether a binary table of contents is generated (YES) or a
717 # normal table of contents (NO) in the .chm file.
721 # The TOC_EXPAND flag can be set to YES to add extra items for group members
722 # to the contents of the HTML help documentation and to the tree view.
726 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
727 # top of each HTML page. The value NO (the default) enables the index and
728 # the value YES disables it.
732 # This tag can be used to set the number of enum values (range [1..20])
733 # that doxygen will group on one line in the generated HTML documentation.
735 ENUM_VALUES_PER_LINE = 4
737 # If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
738 # generated containing a tree-like index structure (just like the one that
739 # is generated for HTML Help). For this to work a browser that supports
740 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
741 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
742 # probably better off using the HTML help feature.
744 GENERATE_TREEVIEW = NO
746 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
747 # used to set the initial width (in pixels) of the frame in which the tree
752 #---------------------------------------------------------------------------
753 # configuration options related to the LaTeX output
754 #---------------------------------------------------------------------------
756 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
757 # generate Latex output.
761 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
762 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
763 # put in front of it. If left blank `latex' will be used as the default path.
767 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
768 # invoked. If left blank `latex' will be used as the default command name.
770 LATEX_CMD_NAME = latex
772 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
773 # generate index for LaTeX. If left blank `makeindex' will be used as the
774 # default command name.
776 MAKEINDEX_CMD_NAME = makeindex
778 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
779 # LaTeX documents. This may be useful for small projects and may help to
780 # save some trees in general.
784 # The PAPER_TYPE tag can be used to set the paper type that is used
785 # by the printer. Possible values are: a4, a4wide, letter, legal and
786 # executive. If left blank a4wide will be used.
790 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
791 # packages that should be included in the LaTeX output.
795 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
796 # the generated latex document. The header should contain everything until
797 # the first chapter. If it is left blank doxygen will generate a
798 # standard header. Notice: only use this tag if you know what you are doing!
802 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
803 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
804 # contain links (just like the HTML output) instead of page references
805 # This makes the output suitable for online browsing using a pdf viewer.
809 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
810 # plain latex in the generated Makefile. Set this option to YES to get a
811 # higher quality PDF documentation.
815 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
816 # command to the generated LaTeX files. This will instruct LaTeX to keep
817 # running if errors occur, instead of asking the user for help.
818 # This option is also used when generating formulas in HTML.
822 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
823 # include the index chapters (such as File Index, Compound Index, etc.)
826 LATEX_HIDE_INDICES = NO
828 #---------------------------------------------------------------------------
829 # configuration options related to the RTF output
830 #---------------------------------------------------------------------------
832 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
833 # The RTF output is optimized for Word 97 and may not look very pretty with
834 # other RTF readers or editors.
838 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
839 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
840 # put in front of it. If left blank `rtf' will be used as the default path.
844 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
845 # RTF documents. This may be useful for small projects and may help to
846 # save some trees in general.
850 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
851 # will contain hyperlink fields. The RTF file will
852 # contain links (just like the HTML output) instead of page references.
853 # This makes the output suitable for online browsing using WORD or other
854 # programs which support those fields.
855 # Note: wordpad (write) and others do not support links.
859 # Load stylesheet definitions from file. Syntax is similar to doxygen's
860 # config file, i.e. a series of assignments. You only have to provide
861 # replacements, missing definitions are set to their default value.
863 RTF_STYLESHEET_FILE =
865 # Set optional variables used in the generation of an rtf document.
866 # Syntax is similar to doxygen's config file.
868 RTF_EXTENSIONS_FILE =
870 #---------------------------------------------------------------------------
871 # configuration options related to the man page output
872 #---------------------------------------------------------------------------
874 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
879 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
880 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
881 # put in front of it. If left blank `man' will be used as the default path.
885 # The MAN_EXTENSION tag determines the extension that is added to
886 # the generated man pages (default is the subroutine's section .3)
888 MAN_EXTENSION = .3dbus
890 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
891 # then it will generate one additional man file for each entity
892 # documented in the real man page(s). These additional files
893 # only source the real man page, but without them the man command
894 # would be unable to find the correct page. The default is NO.
898 #---------------------------------------------------------------------------
899 # configuration options related to the XML output
900 #---------------------------------------------------------------------------
902 # If the GENERATE_XML tag is set to YES Doxygen will
903 # generate an XML file that captures the structure of
904 # the code including all documentation.
908 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
909 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
910 # put in front of it. If left blank `xml' will be used as the default path.
914 # The XML_SCHEMA tag can be used to specify an XML schema,
915 # which can be used by a validating XML parser to check the
916 # syntax of the XML files.
920 # The XML_DTD tag can be used to specify an XML DTD,
921 # which can be used by a validating XML parser to check the
922 # syntax of the XML files.
926 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
927 # dump the program listings (including syntax highlighting
928 # and cross-referencing information) to the XML output. Note that
929 # enabling this will significantly increase the size of the XML output.
931 XML_PROGRAMLISTING = NO
933 #---------------------------------------------------------------------------
934 # configuration options for the AutoGen Definitions output
935 #---------------------------------------------------------------------------
937 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
938 # generate an AutoGen Definitions (see autogen.sf.net) file
939 # that captures the structure of the code including all
940 # documentation. Note that this feature is still experimental
941 # and incomplete at the moment.
943 GENERATE_AUTOGEN_DEF = NO
945 #---------------------------------------------------------------------------
946 # configuration options related to the Perl module output
947 #---------------------------------------------------------------------------
949 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
950 # generate a Perl module file that captures the structure of
951 # the code including all documentation. Note that this
952 # feature is still experimental and incomplete at the
955 GENERATE_PERLMOD = NO
957 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
958 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
959 # to generate PDF and DVI output from the Perl module output.
963 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
964 # nicely formatted so it can be parsed by a human reader. This is useful
965 # if you want to understand what is going on. On the other hand, if this
966 # tag is set to NO the size of the Perl module output will be much smaller
967 # and Perl will parse it just the same.
971 # The names of the make variables in the generated doxyrules.make file
972 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
973 # This is useful so different doxyrules.make files included by the same
974 # Makefile don't overwrite each other's variables.
976 PERLMOD_MAKEVAR_PREFIX =
978 #---------------------------------------------------------------------------
979 # Configuration options related to the preprocessor
980 #---------------------------------------------------------------------------
982 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
983 # evaluate all C-preprocessor directives found in the sources and include
986 ENABLE_PREPROCESSING = YES
988 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
989 # names in the source code. If set to NO (the default) only conditional
990 # compilation will be performed. Macro expansion can be done in a controlled
991 # way by setting EXPAND_ONLY_PREDEF to YES.
993 MACRO_EXPANSION = YES
995 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
996 # then the macro expansion is limited to the macros specified with the
997 # PREDEFINED and EXPAND_AS_DEFINED tags.
999 EXPAND_ONLY_PREDEF = YES
1001 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1002 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1004 SEARCH_INCLUDES = YES
1006 # The INCLUDE_PATH tag can be used to specify one or more directories that
1007 # contain include files that are not input files but should be processed by
1012 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1013 # patterns (like *.h and *.hpp) to filter out the header-files in the
1014 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1017 INCLUDE_FILE_PATTERNS =
1019 # The PREDEFINED tag can be used to specify one or more macro names that
1020 # are defined before the preprocessor is started (similar to the -D option of
1021 # gcc). The argument of the tag is a list of macros of the form: name
1022 # or name=definition (no spaces). If the definition and the = are
1023 # omitted =1 is assumed. To prevent a macro definition from being
1024 # undefined via #undef or recursively expanded use the := operator
1025 # instead of the = operator.
1027 PREDEFINED = DBUS_BEGIN_DECLS= \
1029 DOXYGEN_SHOULD_SKIP_THIS \
1030 _DBUS_DEFINE_GLOBAL_LOCK(name)= \
1031 _DBUS_GNUC_PRINTF(from,to)= \
1032 Q_DECLARE_FLAGS(flags,theenum)=
1034 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1035 # this tag can be used to specify a list of macro names that should be expanded.
1036 # The macro definition that is found in the sources will be used.
1037 # Use the PREDEFINED tag if you want to use a different macro definition.
1041 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1042 # doxygen's preprocessor will remove all function-like macros that are alone
1043 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1044 # function macros are typically used for boiler-plate code, and will confuse
1045 # the parser if not removed.
1047 SKIP_FUNCTION_MACROS = YES
1049 #---------------------------------------------------------------------------
1050 # Configuration::additions related to external references
1051 #---------------------------------------------------------------------------
1053 # The TAGFILES option can be used to specify one or more tagfiles.
1054 # Optionally an initial location of the external documentation
1055 # can be added for each tagfile. The format of a tag file without
1056 # this location is as follows:
1057 # TAGFILES = file1 file2 ...
1058 # Adding location for the tag files is done as follows:
1059 # TAGFILES = file1=loc1 "file2 = loc2" ...
1060 # where "loc1" and "loc2" can be relative or absolute paths or
1061 # URLs. If a location is present for each tag, the installdox tool
1062 # does not have to be run to correct the links.
1063 # Note that each tag file must have a unique name
1064 # (where the name does NOT include the path)
1065 # If a tag file is not located in the directory in which doxygen
1066 # is run, you must also specify the path to the tagfile here.
1068 TAGFILES = /home/tjmaciei/troll/qt-4.1/doc/qt.tag=http://doc.trolltech.com/4.1
1070 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1071 # a tag file that is based on the input files it reads.
1075 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1076 # in the class index. If set to NO only the inherited external classes
1081 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1082 # in the modules index. If set to NO, only the current project's groups will
1085 EXTERNAL_GROUPS = YES
1087 # The PERL_PATH should be the absolute path and name of the perl script
1088 # interpreter (i.e. the result of `which perl').
1092 #---------------------------------------------------------------------------
1093 # Configuration options related to the dot tool
1094 #---------------------------------------------------------------------------
1096 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1097 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1098 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1099 # this option is superseded by the HAVE_DOT option below. This is only a
1100 # fallback. It is recommended to install and use dot, since it yields more
1103 CLASS_DIAGRAMS = YES
1105 # If set to YES, the inheritance and collaboration graphs will hide
1106 # inheritance and usage relations if the target is undocumented
1107 # or is not a class.
1109 HIDE_UNDOC_RELATIONS = YES
1111 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1112 # available from the path. This tool is part of Graphviz, a graph visualization
1113 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1114 # have no effect if this option is set to NO (the default)
1118 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1119 # will generate a graph for each documented class showing the direct and
1120 # indirect inheritance relations. Setting this tag to YES will force the
1121 # the CLASS_DIAGRAMS tag to NO.
1125 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1126 # will generate a graph for each documented class showing the direct and
1127 # indirect implementation dependencies (inheritance, containment, and
1128 # class references variables) of the class with other documented classes.
1130 COLLABORATION_GRAPH = YES
1132 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1133 # will generate a graph for groups, showing the direct groups dependencies
1137 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1138 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1143 # If set to YES, the inheritance and collaboration graphs will show the
1144 # relations between templates and their instances.
1146 TEMPLATE_RELATIONS = YES
1148 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1149 # tags are set to YES then doxygen will generate a graph for each documented
1150 # file showing the direct and indirect include dependencies of the file with
1151 # other documented files.
1155 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1156 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1157 # documented header file showing the documented files that directly or
1158 # indirectly include this file.
1160 INCLUDED_BY_GRAPH = YES
1162 # If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will
1163 # generate a call dependency graph for every global function or class method.
1164 # Note that enabling this option will significantly increase the time of a run.
1165 # So in most cases it will be better to enable call graphs for selected
1166 # functions only using the \callgraph command.
1170 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1171 # will graphical hierarchy of all classes instead of a textual one.
1173 GRAPHICAL_HIERARCHY = YES
1175 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1176 # then doxygen will show the dependencies a directory has on other directories
1177 # in a graphical way. The dependency relations are determined by the #include
1178 # relations between the files in the directories.
1180 DIRECTORY_GRAPH = YES
1182 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1183 # generated by dot. Possible values are png, jpg, or gif
1184 # If left blank png will be used.
1186 DOT_IMAGE_FORMAT = png
1188 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1189 # found. If left blank, it is assumed the dot tool can be found in the path.
1193 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1194 # contain dot files that are included in the documentation (see the
1195 # \dotfile command).
1199 # The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width
1200 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1201 # this value, doxygen will try to truncate the graph, so that it fits within
1202 # the specified constraint. Beware that most browsers cannot cope with very
1205 MAX_DOT_GRAPH_WIDTH = 640
1207 # The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height
1208 # (in pixels) of the graphs generated by dot. If a graph becomes larger than
1209 # this value, doxygen will try to truncate the graph, so that it fits within
1210 # the specified constraint. Beware that most browsers cannot cope with very
1213 MAX_DOT_GRAPH_HEIGHT = 1024
1215 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1216 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1217 # from the root by following a path via at most 3 edges will be shown. Nodes
1218 # that lay further from the root node will be omitted. Note that setting this
1219 # option to 1 or 2 may greatly reduce the computation time needed for large
1220 # code bases. Also note that a graph may be further truncated if the graph's
1221 # image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH
1222 # and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default),
1223 # the graph is not depth-constrained.
1225 MAX_DOT_GRAPH_DEPTH = 0
1227 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1228 # background. This is disabled by default, which results in a white background.
1229 # Warning: Depending on the platform used, enabling this option may lead to
1230 # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
1233 DOT_TRANSPARENT = NO
1235 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1236 # files in one run (i.e. multiple -o and -T options on the command line). This
1237 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1238 # support this, this feature is disabled by default.
1240 DOT_MULTI_TARGETS = NO
1242 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1243 # generate a legend page explaining the meaning of the various boxes and
1244 # arrows in the dot generated graphs.
1246 GENERATE_LEGEND = YES
1248 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1249 # remove the intermediate dot files that are used to generate
1250 # the various graphs.
1254 #---------------------------------------------------------------------------
1255 # Configuration::additions related to the search engine
1256 #---------------------------------------------------------------------------
1258 # The SEARCHENGINE tag specifies whether or not a search engine should be
1259 # used. If set to NO the values of all tags below this one will be ignored.