packages/system.collections/4.3.0/ref/netstandard1.0/ko/System.Collections.xml

   1 <?xml version="1.0" encoding="utf-8"?>
   2 <doc>
   3   <assembly>
   4     <name>System.Collections</name>
   5   </assembly>
   6   <members>
   7     <member name="T:System.Collections.BitArray">
   8       <summary>부울로 나타나는 간단한 비트 값 배열을 관리합니다. 여기에서 true는 비트가 설정(1)되었고 false는 비트가 해제(0)되었음을 나타냅니다.</summary>
   9       <filterpriority>2</filterpriority>
  10     </member>
  11     <member name="M:System.Collections.BitArray.#ctor(System.Boolean[])">
  12       <summary>지정한 부울 배열에서 복사된 비트 값을 포함하는 <see cref="T:System.Collections.BitArray" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
  13       <param name="values">복사할 부울 배열입니다. </param>
  14       <exception cref="T:System.ArgumentNullException">
  15         <paramref name="values" /> is null. </exception>
  16     </member>
  17     <member name="M:System.Collections.BitArray.#ctor(System.Byte[])">
  18       <summary>지정한 바이트 배열에서 복사된 비트 값을 포함하는 <see cref="T:System.Collections.BitArray" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
  19       <param name="bytes">복사할 값을 포함하는 바이트 배열로, 각 바이트는 8개의 연속 비트를 나타냅니다. </param>
  20       <exception cref="T:System.ArgumentNullException">
  21         <paramref name="bytes" /> is null. </exception>
  22       <exception cref="T:System.ArgumentException">The length of <paramref name="bytes" /> is greater than <see cref="F:System.Int32.MaxValue" />.</exception>
  23     </member>
  24     <member name="M:System.Collections.BitArray.#ctor(System.Collections.BitArray)">
  25       <summary>지정한 <see cref="T:System.Collections.BitArray" />에서 복사된 비트 값을 포함하는 <see cref="T:System.Collections.BitArray" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
  26       <param name="bits">복사할 <see cref="T:System.Collections.BitArray" />입니다. </param>
  27       <exception cref="T:System.ArgumentNullException">
  28         <paramref name="bits" /> is null. </exception>
  29     </member>
  30     <member name="M:System.Collections.BitArray.#ctor(System.Int32)">
  31       <summary>지정한 비트 값을 보유할 수 있는 <see cref="T:System.Collections.BitArray" /> 클래스의 새 인스턴스를 초기화합니다. 이러한 값은 초기에 false로 설정됩니다.</summary>
  32       <param name="length">새 <see cref="T:System.Collections.BitArray" />에 있는 비트 값입니다. </param>
  33       <exception cref="T:System.ArgumentOutOfRangeException">
  34         <paramref name="length" /> is less than zero. </exception>
  35     </member>
  36     <member name="M:System.Collections.BitArray.#ctor(System.Int32,System.Boolean)">
  37       <summary>지정한 비트 값을 보유할 수 있는 <see cref="T:System.Collections.BitArray" /> 클래스의 새 인스턴스를 초기화합니다. 이러한 값은 초기에 지정된 값으로 설정됩니다.</summary>
  38       <param name="length">새 <see cref="T:System.Collections.BitArray" />에 있는 비트 값입니다. </param>
  39       <param name="defaultValue">각 비트에 할당될 부울 값입니다. </param>
  40       <exception cref="T:System.ArgumentOutOfRangeException">
  41         <paramref name="length" /> is less than zero. </exception>
  42     </member>
  43     <member name="M:System.Collections.BitArray.#ctor(System.Int32[])">
  44       <summary>지정한 32비트 정수 배열에서 복사된 비트 값을 포함하는 <see cref="T:System.Collections.BitArray" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
  45       <param name="values">복사할 값을 포함하는 정수 배열로, 각 정수는 32개의 연속 비트를 나타냅니다. </param>
  46       <exception cref="T:System.ArgumentNullException">
  47         <paramref name="values" /> is null. </exception>
  48       <exception cref="T:System.ArgumentException">The length of <paramref name="values" /> is greater than <see cref="F:System.Int32.MaxValue" /></exception>
  49     </member>
  50     <member name="M:System.Collections.BitArray.And(System.Collections.BitArray)">
  51       <summary>현재 <see cref="T:System.Collections.BitArray" />의 요소와 지정한 <see cref="T:System.Collections.BitArray" />의 해당 요소에 대해 비트 AND 연산을 수행합니다.</summary>
  52       <returns>현재 <see cref="T:System.Collections.BitArray" />의 요소와 지정한 <see cref="T:System.Collections.BitArray" />의 해당 요소에 대한 비트 AND 연산 결과가 포함된 현재 인스턴스입니다.</returns>
  53       <param name="value">비트 AND 연산이 수행될 <see cref="T:System.Collections.BitArray" />입니다. </param>
  54       <exception cref="T:System.ArgumentNullException">
  55         <paramref name="value" /> is null. </exception>
  56       <exception cref="T:System.ArgumentException">
  57         <paramref name="value" /> and the current <see cref="T:System.Collections.BitArray" /> do not have the same number of elements. </exception>
  58       <filterpriority>2</filterpriority>
  59     </member>
  60     <member name="M:System.Collections.BitArray.Get(System.Int32)">
  61       <summary>
  62         <see cref="T:System.Collections.BitArray" />의 특정 위치에서 비트 값을 가져옵니다.</summary>
  63       <returns>
  64         <paramref name="index" /> 위치의 비트 값입니다.</returns>
  65       <param name="index">가져올 값의 0부터 시작하는 인덱스입니다. </param>
  66       <exception cref="T:System.ArgumentOutOfRangeException">
  67         <paramref name="index" /> is less than zero.-or- <paramref name="index" /> is greater than or equal to the number of elements in the <see cref="T:System.Collections.BitArray" />. </exception>
  68       <filterpriority>2</filterpriority>
  69     </member>
  70     <member name="M:System.Collections.BitArray.GetEnumerator">
  71       <summary>
  72         <see cref="T:System.Collections.BitArray" />을 반복하는 열거자를 반환합니다.</summary>
  73       <returns>전체 <see cref="T:System.Collections.BitArray" />의 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
  74       <filterpriority>2</filterpriority>
  75     </member>
  76     <member name="P:System.Collections.BitArray.Item(System.Int32)">
  77       <summary>
  78         <see cref="T:System.Collections.BitArray" />의 특정 위치에서 비트 값을 가져오거나 설정합니다.</summary>
  79       <returns>
  80         <paramref name="index" /> 위치의 비트 값입니다.</returns>
  81       <param name="index">가져오거나 설정할 값의 0부터 시작하는 인덱스입니다. </param>
  82       <exception cref="T:System.ArgumentOutOfRangeException">
  83         <paramref name="index" /> is less than zero.-or- <paramref name="index" /> is equal to or greater than <see cref="P:System.Collections.BitArray.Count" />. </exception>
  84       <filterpriority>2</filterpriority>
  85     </member>
  86     <member name="P:System.Collections.BitArray.Length">
  87       <summary>
  88         <see cref="T:System.Collections.BitArray" />의 요소 수를 가져오거나 설정합니다.</summary>
  89       <returns>
  90         <see cref="T:System.Collections.BitArray" />의 요소 수입니다.</returns>
  91       <exception cref="T:System.ArgumentOutOfRangeException">The property is set to a value that is less than zero. </exception>
  92       <filterpriority>2</filterpriority>
  93     </member>
  94     <member name="M:System.Collections.BitArray.Not">
  95       <summary>true로 설정된 요소는 false로 변경되고 false로 설정된 요소는 true로 변경되도록 현재 <see cref="T:System.Collections.BitArray" />에 있는 모든 비트 값을 반전합니다.</summary>
  96       <returns>반전된 비트 값을 가지는 현재 인스턴스입니다.</returns>
  97       <filterpriority>2</filterpriority>
  98     </member>
  99     <member name="M:System.Collections.BitArray.Or(System.Collections.BitArray)">
 100       <summary>현재 <see cref="T:System.Collections.BitArray" />의 요소와 지정한 <see cref="T:System.Collections.BitArray" />의 해당 요소에 대한 비트 OR 연산을 수행합니다.</summary>
 101       <returns>현재 <see cref="T:System.Collections.BitArray" />의 요소와 지정한 <see cref="T:System.Collections.BitArray" />의 해당 요소에 대한 비트 OR 연산 결과가 포함된 현재 인스턴스입니다.</returns>
 102       <param name="value">비트 OR 연산이 수행될 <see cref="T:System.Collections.BitArray" />입니다. </param>
 103       <exception cref="T:System.ArgumentNullException">
 104         <paramref name="value" /> is null. </exception>
 105       <exception cref="T:System.ArgumentException">
 106         <paramref name="value" /> and the current <see cref="T:System.Collections.BitArray" /> do not have the same number of elements. </exception>
 107       <filterpriority>2</filterpriority>
 108     </member>
 109     <member name="M:System.Collections.BitArray.Set(System.Int32,System.Boolean)">
 110       <summary>
 111         <see cref="T:System.Collections.BitArray" />의 특정 위치에 있는 비트를 지정한 값으로 설정합니다.</summary>
 112       <param name="index">설정할 비트의 0부터 시작하는 인덱스입니다. </param>
 113       <param name="value">비트에 할당될 부울 값입니다. </param>
 114       <exception cref="T:System.ArgumentOutOfRangeException">
 115         <paramref name="index" /> is less than zero.-or- <paramref name="index" /> is greater than or equal to the number of elements in the <see cref="T:System.Collections.BitArray" />. </exception>
 116       <filterpriority>2</filterpriority>
 117     </member>
 118     <member name="M:System.Collections.BitArray.SetAll(System.Boolean)">
 119       <summary>
 120         <see cref="T:System.Collections.BitArray" />의 모든 비트를 지정한 값으로 설정합니다.</summary>
 121       <param name="value">모든 비트에 할당할 부울 값입니다. </param>
 122       <filterpriority>2</filterpriority>
 123     </member>
 124     <member name="M:System.Collections.BitArray.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
 125       <summary>지정된 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.BitArray" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
 126       <param name="array">
 127         <see cref="T:System.Collections.BitArray" />에서 복사한 요소의 대상인 1차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 128       <param name="index">
 129         <paramref name="array" />에서 복사가 시작되는 0부터 시작하는 인덱스입니다. </param>
 130       <exception cref="T:System.ArgumentNullException">
 131         <paramref name="array" /> is null. </exception>
 132       <exception cref="T:System.ArgumentOutOfRangeException">
 133         <paramref name="index" /> is less than zero. </exception>
 134       <exception cref="T:System.ArgumentException">
 135         <paramref name="array" /> is multidimensional.-or- The number of elements in the source <see cref="T:System.Collections.BitArray" /> is greater than the available space from <paramref name="index" /> to the end of the destination <paramref name="array" />.-or-The type of the source <see cref="T:System.Collections.BitArray" /> cannot be cast automatically to the type of the destination <paramref name="array" />.</exception>
 136     </member>
 137     <member name="P:System.Collections.BitArray.System#Collections#ICollection#Count">
 138       <summary>
 139         <see cref="T:System.Collections.BitArray" />의 요소 수를 가져옵니다.</summary>
 140       <returns>
 141         <see cref="T:System.Collections.BitArray" />의 요소 수입니다.</returns>
 142     </member>
 143     <member name="P:System.Collections.BitArray.System#Collections#ICollection#IsSynchronized">
 144       <summary>
 145         <see cref="T:System.Collections.BitArray" />에 대한 액세스가 동기화되었는지 여부, 즉 스레드로부터 안전한지를 나타내는 값을 가져옵니다.</summary>
 146       <returns>
 147         <see cref="T:System.Collections.BitArray" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.</returns>
 148     </member>
 149     <member name="P:System.Collections.BitArray.System#Collections#ICollection#SyncRoot">
 150       <summary>
 151         <see cref="T:System.Collections.BitArray" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
 152       <returns>
 153         <see cref="T:System.Collections.BitArray" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.</returns>
 154     </member>
 155     <member name="M:System.Collections.BitArray.Xor(System.Collections.BitArray)">
 156       <summary>현재 <see cref="T:System.Collections.BitArray" />의 요소와 지정한 <see cref="T:System.Collections.BitArray" />의 해당 요소에 대한 배타적 비트 OR 연산을 수행합니다.</summary>
 157       <returns>현재 <see cref="T:System.Collections.BitArray" />의 요소와 지정한 <see cref="T:System.Collections.BitArray" />의 해당 요소에 대한 배타적 비트 OR 연산 결과가 포함된 현재 인스턴스입니다. </returns>
 158       <param name="value">배타적 비트 OR 연산이 수행될 <see cref="T:System.Collections.BitArray" />입니다. </param>
 159       <exception cref="T:System.ArgumentNullException">
 160         <paramref name="value" /> is null. </exception>
 161       <exception cref="T:System.ArgumentException">
 162         <paramref name="value" /> and the current <see cref="T:System.Collections.BitArray" /> do not have the same number of elements. </exception>
 163       <filterpriority>2</filterpriority>
 164     </member>
 165     <member name="T:System.Collections.StructuralComparisons">
 166       <summary>두 컬렉션 개체의 구조를 비교하기 위한 개체를 제공합니다.</summary>
 167     </member>
 168     <member name="P:System.Collections.StructuralComparisons.StructuralComparer">
 169       <summary>두 개체의 구조를 비교하는 미리 정의된 개체를 가져옵니다.</summary>
 170       <returns>두 컬렉션 개체의 구조를 비교하는 데 사용되는 미리 정의된 개체입니다.</returns>
 171     </member>
 172     <member name="P:System.Collections.StructuralComparisons.StructuralEqualityComparer">
 173       <summary>두 개체의 구조가 같은지 비교하는 미리 정의된 개체를 가져옵니다.</summary>
 174       <returns>두 컬렉션 개체의 구조가 같은지 비교하는 데 사용되는 미리 정의된 개체입니다.</returns>
 175     </member>
 176     <member name="T:System.Collections.Generic.Comparer`1">
 177       <summary>
 178         <see cref="T:System.Collections.Generic.IComparer`1" /> 제네릭 인터페이스의 구현에 대한 기본 클래스를 제공합니다.</summary>
 179       <typeparam name="T">비교할 개체의 형식입니다.</typeparam>
 180       <filterpriority>1</filterpriority>
 181     </member>
 182     <member name="M:System.Collections.Generic.Comparer`1.#ctor">
 183       <summary>
 184         <see cref="T:System.Collections.Generic.Comparer`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 185     </member>
 186     <member name="M:System.Collections.Generic.Comparer`1.Compare(`0,`0)">
 187       <summary>파생된 클래스에서 재정의된 경우 같은 형식의 두 개체를 비교한 다음 한 개체가 다른 개체보다 작은지, 큰지 또는 두 개체가 같은지 여부를 나타내는 값을 반환합니다.</summary>
 188       <returns>다음 표와 같이 <paramref name="x" /> 및 <paramref name="y" />의 상대 값을 나타내는 부호 있는 정수입니다.값 의미 0보다 작음 <paramref name="x" />가 <paramref name="y" />보다 작습니다.Zero <paramref name="x" />가 <paramref name="y" />와 같습니다.0보다 큼 <paramref name="x" />가 <paramref name="y" />보다 큰 경우</returns>
 189       <param name="x">비교할 첫 번째 개체입니다.</param>
 190       <param name="y">비교할 두 번째 개체입니다.</param>
 191       <exception cref="T:System.ArgumentException">
 192         <paramref name="T" /> 형식이 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스나 <see cref="T:System.IComparable" /> 인터페이스를 구현하지 않는 경우</exception>
 193     </member>
 194     <member name="M:System.Collections.Generic.Comparer`1.Create(System.Comparison{`0})">
 195       <summary>지정된 비교를 사용하여 비교자를 만듭니다.</summary>
 196       <returns>새 비교자입니다.</returns>
 197       <param name="comparison">사용할 비교입니다.</param>
 198     </member>
 199     <member name="P:System.Collections.Generic.Comparer`1.Default">
 200       <summary>제네릭 인수에서 지정한 형식의 기본 정렬 순서 비교자를 반환합니다.</summary>
 201       <returns>
 202         <see cref="T:System.Collections.Generic.Comparer`1" />을 상속하고 <paramref name="T" /> 형식에 대한 정렬 순서 비교자의 역할을 하는 개체입니다.</returns>
 203     </member>
 204     <member name="M:System.Collections.Generic.Comparer`1.System#Collections#IComparer#Compare(System.Object,System.Object)">
 205       <summary>두 개체를 비교하여 한 개체가 다른 개체보다 작거나, 같거나 또는 크다는 것을 나타내는 값을 반환합니다.</summary>
 206       <returns>다음 표와 같이 <paramref name="x" /> 및 <paramref name="y" />의 상대 값을 나타내는 부호 있는 정수입니다.값 의미 0보다 작음<paramref name="x" />가 <paramref name="y" />보다 작습니다.Zero<paramref name="x" />가 <paramref name="y" />와 같습니다.0보다 큼<paramref name="x" />가 <paramref name="y" />보다 큰 경우</returns>
 207       <param name="x">비교할 첫 번째 개체입니다.</param>
 208       <param name="y">비교할 두 번째 개체입니다.</param>
 209       <exception cref="T:System.ArgumentException">
 210         <paramref name="x" /> 또는 <paramref name="y" />가 <paramref name="T" /> 형식으로 캐스팅할 수 없는 형식인 경우또는<paramref name="x" />와 <paramref name="y" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스나 <see cref="T:System.IComparable" /> 인터페이스를 구현하지 않는 경우</exception>
 211     </member>
 212     <member name="T:System.Collections.Generic.Dictionary`2">
 213       <summary>키와 값의 컬렉션을 나타냅니다.이 형식에 대 한.NET Framework 소스 코드를 찾아보려면 참조는 Reference Source.</summary>
 214       <typeparam name="TKey">사전에 있는 키의 형식입니다.</typeparam>
 215       <typeparam name="TValue">사전에 있는 값의 형식입니다.</typeparam>
 216       <filterpriority>1</filterpriority>
 217     </member>
 218     <member name="M:System.Collections.Generic.Dictionary`2.#ctor">
 219       <summary>기본 초기 용량을 갖고 있고 키 형식에 대한 기본 같음 비교자를 사용하는 비어 있는 <see cref="T:System.Collections.Generic.Dictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 220     </member>
 221     <member name="M:System.Collections.Generic.Dictionary`2.#ctor(System.Collections.Generic.IDictionary{`0,`1})">
 222       <summary>지정한 <see cref="T:System.Collections.Generic.IDictionary`2" />에서 복사된 요소를 포함하고 키 형식에 대한 기본 같음 비교자를 사용하는 <see cref="T:System.Collections.Generic.Dictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 223       <param name="dictionary">요소가 새 <see cref="T:System.Collections.Generic.IDictionary`2" />에 복사되는 <see cref="T:System.Collections.Generic.Dictionary`2" />입니다.</param>
 224       <exception cref="T:System.ArgumentNullException">
 225         <paramref name="dictionary" />가 null인 경우</exception>
 226       <exception cref="T:System.ArgumentException">
 227         <paramref name="dictionary" />에 중복 키가 하나 이상 포함된 경우</exception>
 228     </member>
 229     <member name="M:System.Collections.Generic.Dictionary`2.#ctor(System.Collections.Generic.IDictionary{`0,`1},System.Collections.Generic.IEqualityComparer{`0})">
 230       <summary>지정한 <see cref="T:System.Collections.Generic.IDictionary`2" />에서 복사된 요소를 포함하고 지정한 <see cref="T:System.Collections.Generic.IEqualityComparer`1" />을 사용하는 <see cref="T:System.Collections.Generic.Dictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 231       <param name="dictionary">요소가 새 <see cref="T:System.Collections.Generic.IDictionary`2" />에 복사되는 <see cref="T:System.Collections.Generic.Dictionary`2" />입니다.</param>
 232       <param name="comparer">키를 비교할 때 사용할 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 구현을 지정하거나, 해당 키 형식에 기본 null을 사용하려면 <see cref="T:System.Collections.Generic.EqualityComparer`1" />을 지정합니다.</param>
 233       <exception cref="T:System.ArgumentNullException">
 234         <paramref name="dictionary" />가 null인 경우</exception>
 235       <exception cref="T:System.ArgumentException">
 236         <paramref name="dictionary" />에 중복 키가 하나 이상 포함된 경우</exception>
 237     </member>
 238     <member name="M:System.Collections.Generic.Dictionary`2.#ctor(System.Collections.Generic.IEqualityComparer{`0})">
 239       <summary>기본 초기 용량을 갖고 있고 지정된 <see cref="T:System.Collections.Generic.Dictionary`2" />을 사용하는 비어 있는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 240       <param name="comparer">키를 비교할 때 사용할 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 구현을 지정하거나, 해당 키 형식에 기본 null을 사용하려면 <see cref="T:System.Collections.Generic.EqualityComparer`1" />을 지정합니다.</param>
 241     </member>
 242     <member name="M:System.Collections.Generic.Dictionary`2.#ctor(System.Int32)">
 243       <summary>지정된 초기 용량을 갖고 있고 키 형식에 대한 기본 같음 비교자를 사용하는 비어 있는 <see cref="T:System.Collections.Generic.Dictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 244       <param name="capacity">
 245         <see cref="T:System.Collections.Generic.Dictionary`2" />에 포함될 수 있는 초기 요소 수입니다.</param>
 246       <exception cref="T:System.ArgumentOutOfRangeException">
 247         <paramref name="capacity" />가 0보다 작은 경우</exception>
 248     </member>
 249     <member name="M:System.Collections.Generic.Dictionary`2.#ctor(System.Int32,System.Collections.Generic.IEqualityComparer{`0})">
 250       <summary>지정된 초기 용량을 갖고 있고 지정된 <see cref="T:System.Collections.Generic.Dictionary`2" />을 사용하는 비어 있는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 251       <param name="capacity">
 252         <see cref="T:System.Collections.Generic.Dictionary`2" />에 포함될 수 있는 초기 요소 수입니다.</param>
 253       <param name="comparer">키를 비교할 때 사용할 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 구현을 지정하거나, 해당 키 형식에 기본 null을 사용하려면 <see cref="T:System.Collections.Generic.EqualityComparer`1" />을 지정합니다.</param>
 254       <exception cref="T:System.ArgumentOutOfRangeException">
 255         <paramref name="capacity" />가 0보다 작은 경우</exception>
 256     </member>
 257     <member name="M:System.Collections.Generic.Dictionary`2.Add(`0,`1)">
 258       <summary>지정한 키와 값을 사전에 추가합니다.</summary>
 259       <param name="key">추가할 요소의 키입니다.</param>
 260       <param name="value">추가할 요소의 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
 261       <exception cref="T:System.ArgumentNullException">
 262         <paramref name="key" />가 null인 경우</exception>
 263       <exception cref="T:System.ArgumentException">같은 키를 가진 요소가 이미 <see cref="T:System.Collections.Generic.Dictionary`2" />에 있는 경우</exception>
 264     </member>
 265     <member name="M:System.Collections.Generic.Dictionary`2.Clear">
 266       <summary>
 267         <see cref="T:System.Collections.Generic.Dictionary`2" />에서 모든 키와 값을 제거합니다.</summary>
 268     </member>
 269     <member name="P:System.Collections.Generic.Dictionary`2.Comparer">
 270       <summary>사전에 대한 키의 일치 여부를 확인하는 데 사용되는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" />을 가져옵니다. </summary>
 271       <returns>현재 <see cref="T:System.Collections.Generic.Dictionary`2" />에 대한 키의 일치 여부를 확인하고 키에 대한 해시 값을 제공하는 데 사용되는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 제네릭 인터페이스 구현입니다.</returns>
 272     </member>
 273     <member name="M:System.Collections.Generic.Dictionary`2.ContainsKey(`0)">
 274       <summary>
 275         <see cref="T:System.Collections.Generic.Dictionary`2" />에 지정한 키가 포함되어 있는지 여부를 확인합니다.</summary>
 276       <returns>true에 지정한 키가 있는 요소가 포함되어 있으면 <see cref="T:System.Collections.Generic.Dictionary`2" />이고, 그렇지 않으면 false입니다.</returns>
 277       <param name="key">
 278         <see cref="T:System.Collections.Generic.Dictionary`2" />에서 찾을 수 있는 키입니다.</param>
 279       <exception cref="T:System.ArgumentNullException">
 280         <paramref name="key" />가 null인 경우</exception>
 281     </member>
 282     <member name="M:System.Collections.Generic.Dictionary`2.ContainsValue(`1)">
 283       <summary>
 284         <see cref="T:System.Collections.Generic.Dictionary`2" />에 특정 값이 들어 있는지 여부를 확인합니다.</summary>
 285       <returns>true에 지정한 값이 있는 요소가 포함되어 있으면 <see cref="T:System.Collections.Generic.Dictionary`2" />이고, 그렇지 않으면 false입니다.</returns>
 286       <param name="value">
 287         <see cref="T:System.Collections.Generic.Dictionary`2" />에서 찾을 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
 288     </member>
 289     <member name="P:System.Collections.Generic.Dictionary`2.Count">
 290       <summary>
 291         <see cref="T:System.Collections.Generic.Dictionary`2" />에 포함된 키/값 쌍의 수를 가져옵니다.</summary>
 292       <returns>
 293         <see cref="T:System.Collections.Generic.Dictionary`2" />에 포함된 키/값 쌍의 수입니다.</returns>
 294     </member>
 295     <member name="M:System.Collections.Generic.Dictionary`2.GetEnumerator">
 296       <summary>
 297         <see cref="T:System.Collections.Generic.Dictionary`2" />를 반복하는 열거자를 반환합니다.</summary>
 298       <returns>
 299         <see cref="T:System.Collections.Generic.Dictionary`2" />에 대한 <see cref="T:System.Collections.Generic.Dictionary`2.Enumerator" /> 구조체입니다.</returns>
 300     </member>
 301     <member name="P:System.Collections.Generic.Dictionary`2.Item(`0)">
 302       <summary>지정된 키에 연결된 값을 가져오거나 설정합니다.</summary>
 303       <returns>지정한 키와 연결된 값입니다.지정한 키가 없으면 가져오기 작업에서 <see cref="T:System.Collections.Generic.KeyNotFoundException" />을 throw하고 설정 작업에서 지정한 키가 있는 새 요소를 만듭니다.</returns>
 304       <param name="key">가져오거나 설정할 값의 키입니다.</param>
 305       <exception cref="T:System.ArgumentNullException">
 306         <paramref name="key" />가 null인 경우</exception>
 307       <exception cref="T:System.Collections.Generic.KeyNotFoundException">속성을 검색할 때 컬렉션에 <paramref name="key" />가 없는 경우</exception>
 308     </member>
 309     <member name="P:System.Collections.Generic.Dictionary`2.Keys">
 310       <summary>
 311         <see cref="T:System.Collections.Generic.Dictionary`2" />의 키를 포함하는 컬렉션을 가져옵니다.</summary>
 312       <returns>
 313         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 키를 포함하는 <see cref="T:System.Collections.Generic.Dictionary`2" />입니다.</returns>
 314     </member>
 315     <member name="M:System.Collections.Generic.Dictionary`2.Remove(`0)">
 316       <summary>
 317         <see cref="T:System.Collections.Generic.Dictionary`2" />에서 지정한 키가 있는 값을 제거합니다.</summary>
 318       <returns>요소를 성공적으로 찾아서 제거한 경우 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="key" />가 <see cref="T:System.Collections.Generic.Dictionary`2" />에 없는 경우 false을 반환합니다.</returns>
 319       <param name="key">제거할 요소의 키입니다.</param>
 320       <exception cref="T:System.ArgumentNullException">
 321         <paramref name="key" />가 null인 경우</exception>
 322     </member>
 323     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#Generic#ICollection{T}#Add(System.Collections.Generic.KeyValuePair{`0,`1})">
 324       <summary>지정한 키가 있는 <see cref="T:System.Collections.Generic.ICollection`1" />에 지정한 값을 추가합니다.</summary>
 325       <param name="keyValuePair">
 326         <see cref="T:System.Collections.Generic.Dictionary`2" />에 추가할 키와 값을 나타내는 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체입니다.</param>
 327       <exception cref="T:System.ArgumentNullException">
 328         <paramref name="keyValuePair" />의 키가 null인 경우</exception>
 329       <exception cref="T:System.ArgumentException">같은 키를 가진 요소가 이미 <see cref="T:System.Collections.Generic.Dictionary`2" />에 있는 경우</exception>
 330     </member>
 331     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#Generic#ICollection{T}#Contains(System.Collections.Generic.KeyValuePair{`0,`1})">
 332       <summary>
 333         <see cref="T:System.Collections.Generic.ICollection`1" />에 특정 키와 값이 들어 있는지 여부를 확인합니다.</summary>
 334       <returns>true가 <paramref name="keyValuePair" />에 있으면 <see cref="T:System.Collections.Generic.ICollection`1" />이고, 그렇지 않으면 false입니다.</returns>
 335       <param name="keyValuePair">
 336         <see cref="T:System.Collections.Generic.KeyValuePair`2" />에서 찾을 <see cref="T:System.Collections.Generic.ICollection`1" /> 구조체입니다.</param>
 337     </member>
 338     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#Generic#ICollection{T}#CopyTo(System.Collections.Generic.KeyValuePair{`0,`1}[],System.Int32)">
 339       <summary>지정한 배열 인덱스부터 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소를  <see cref="T:System.Collections.Generic.KeyValuePair`2" />형식의 배열에 복사합니다.</summary>
 340       <param name="array">
 341         <see cref="T:System.Collections.Generic.ICollection`1" />에서 복사한 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 요소의 대상인 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 형식의 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 342       <param name="index">
 343         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 344       <exception cref="T:System.ArgumentNullException">
 345         <paramref name="array" />가 null인 경우</exception>
 346       <exception cref="T:System.ArgumentOutOfRangeException">
 347         <paramref name="index" />가 0보다 작은 경우</exception>
 348       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
 349     </member>
 350     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#Generic#ICollection{T}#IsReadOnly">
 351       <summary>사전이 읽기 전용인지를 나타내는 값을 가져옵니다.</summary>
 352       <returns>true가 읽기 전용이면 <see cref="T:System.Collections.Generic.ICollection`1" />이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.Dictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
 353     </member>
 354     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#Generic#ICollection{T}#Remove(System.Collections.Generic.KeyValuePair{`0,`1})">
 355       <summary>사전에서 키와 값을 제거합니다.</summary>
 356       <returns>
 357         <paramref name="keyValuePair" />로 표시된 키와 값을 찾아서 제거한 경우 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="keyValuePair" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 없는 경우 false을 반환합니다.</returns>
 358       <param name="keyValuePair">
 359         <see cref="T:System.Collections.Generic.Dictionary`2" />에서 제거할 키와 값을 나타내는 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체입니다.</param>
 360     </member>
 361     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#Generic#IDictionary{TKey@TValue}#Keys">
 362       <summary>
 363         <see cref="T:System.Collections.Generic.ICollection`1" />의 키를 포함하는 <see cref="T:System.Collections.Generic.IDictionary`2" />을 가져옵니다.</summary>
 364       <returns>
 365         <see cref="T:System.Collections.Generic.IDictionary`2" />의 키를 포함하는 <paramref name="TKey" /> 형식의 <see cref="T:System.Collections.Generic.ICollection`1" />입니다.</returns>
 366     </member>
 367     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#Generic#IDictionary{TKey@TValue}#Values">
 368       <summary>
 369         <see cref="T:System.Collections.Generic.ICollection`1" />의 값이 들어 있는 <see cref="T:System.Collections.Generic.IDictionary`2" />을 가져옵니다.</summary>
 370       <returns>
 371         <see cref="T:System.Collections.Generic.IDictionary`2" />의 값을 포함하는 <paramref name="TValue" /> 형식의 <see cref="T:System.Collections.Generic.ICollection`1" />입니다.</returns>
 372     </member>
 373     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
 374       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
 375       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
 376     </member>
 377     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#Generic#IReadOnlyDictionary{TKey@TValue}#Keys">
 378       <summary>
 379         <see cref="T:System.Collections.Generic.IReadOnlyDictionary`2" />의 키를 포함하는 컬렉션을 가져옵니다.</summary>
 380       <returns>
 381         <see cref="T:System.Collections.Generic.IReadOnlyDictionary`2" />의 키가 포함된 컬렉션입니다.</returns>
 382     </member>
 383     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#Generic#IReadOnlyDictionary{TKey@TValue}#Values">
 384       <summary>
 385         <see cref="T:System.Collections.Generic.IReadOnlyDictionary`2" />의 값을 포함하는 컬렉션을 가져옵니다.</summary>
 386       <returns>
 387         <see cref="T:System.Collections.Generic.IReadOnlyDictionary`2" />의 값을 포함하는 컬렉션입니다.</returns>
 388     </member>
 389     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
 390       <summary>지정한 배열 인덱스부터 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소를 배열에 복사합니다.</summary>
 391       <param name="array">
 392         <see cref="T:System.Collections.Generic.ICollection`1" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 393       <param name="index">
 394         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 395       <exception cref="T:System.ArgumentNullException">
 396         <paramref name="array" />가 null인 경우</exception>
 397       <exception cref="T:System.ArgumentOutOfRangeException">
 398         <paramref name="index" />가 0보다 작은 경우</exception>
 399       <exception cref="T:System.ArgumentException">
 400         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.Generic.ICollection`1" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
 401     </member>
 402     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#ICollection#IsSynchronized">
 403       <summary>
 404         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지를 나타내는 값을 가져옵니다.</summary>
 405       <returns>true에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 <see cref="T:System.Collections.ICollection" />이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.Dictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
 406     </member>
 407     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#ICollection#SyncRoot">
 408       <summary>
 409         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
 410       <returns>
 411         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다. </returns>
 412     </member>
 413     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#Add(System.Object,System.Object)">
 414       <summary>지정한 키와 값을 사전에 추가합니다.</summary>
 415       <param name="key">키로 사용할 개체입니다.</param>
 416       <param name="value">값으로 사용할 개체입니다.</param>
 417       <exception cref="T:System.ArgumentNullException">
 418         <paramref name="key" />가 null인 경우</exception>
 419       <exception cref="T:System.ArgumentException">
 420         <paramref name="key" />의 형식을 <paramref name="TKey" />의 <see cref="T:System.Collections.Generic.Dictionary`2" /> 키 형식에 할당할 수 없는 경우또는<paramref name="value" />의 형식을 <paramref name="TValue" />의 값 형식인 <see cref="T:System.Collections.Generic.Dictionary`2" />에 할당할 수 없는 경우또는같은 키가 있는 값이 이미 <see cref="T:System.Collections.Generic.Dictionary`2" />에 있는 경우</exception>
 421     </member>
 422     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#Contains(System.Object)">
 423       <summary>지정된 키를 갖는 요소가 <see cref="T:System.Collections.IDictionary" />에 들어 있는지 여부를 결정합니다.</summary>
 424       <returns>true에 지정한 키가 있는 요소가 포함되어 있으면 <see cref="T:System.Collections.IDictionary" />이고, 그렇지 않으면 false입니다.</returns>
 425       <param name="key">
 426         <see cref="T:System.Collections.IDictionary" />에서 찾을 수 있는 키입니다.</param>
 427       <exception cref="T:System.ArgumentNullException">
 428         <paramref name="key" />가 null인 경우</exception>
 429     </member>
 430     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#GetEnumerator">
 431       <summary>
 432         <see cref="T:System.Collections.IDictionaryEnumerator" />에 대한 <see cref="T:System.Collections.IDictionary" />를 반환합니다.</summary>
 433       <returns>
 434         <see cref="T:System.Collections.IDictionaryEnumerator" />에 대한 <see cref="T:System.Collections.IDictionary" />입니다.</returns>
 435     </member>
 436     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#IsFixedSize">
 437       <summary>
 438         <see cref="T:System.Collections.IDictionary" />의 크기가 고정되어 있는지 여부를 나타내는 값을 가져옵니다.</summary>
 439       <returns>true의 크기가 고정되어 있으면 <see cref="T:System.Collections.IDictionary" />이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.Dictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
 440     </member>
 441     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#IsReadOnly">
 442       <summary>
 443         <see cref="T:System.Collections.IDictionary" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
 444       <returns>true가 읽기 전용이면 <see cref="T:System.Collections.IDictionary" />이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.Dictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
 445     </member>
 446     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#Item(System.Object)">
 447       <summary>지정한 키가 있는 값을 가져오거나 설정합니다.</summary>
 448       <returns>지정한 키와 연결된 값입니다. <paramref name="key" />가 사전에 없거나 <paramref name="key" />의 형식을 <see cref="T:System.Collections.Generic.Dictionary`2" />의 키 형식 <paramref name="TKey" />에 할당할 수 없으면 null입니다.</returns>
 449       <param name="key">가져올 값의 키입니다.</param>
 450       <exception cref="T:System.ArgumentNullException">
 451         <paramref name="key" />가 null인 경우</exception>
 452       <exception cref="T:System.ArgumentException">값이 할당되어 있고 <paramref name="key" />의 형식을 <paramref name="TKey" />의 <see cref="T:System.Collections.Generic.Dictionary`2" /> 키 형식에 할당할 수 없는 경우또는값이 할당되어 있고 <paramref name="value" />의 형식을 <paramref name="TValue" />의 <see cref="T:System.Collections.Generic.Dictionary`2" /> 값 형식에 할당할 수 없는 경우</exception>
 453     </member>
 454     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#Keys">
 455       <summary>
 456         <see cref="T:System.Collections.ICollection" />의 키를 포함하는 <see cref="T:System.Collections.IDictionary" />을 가져옵니다.</summary>
 457       <returns>
 458         <see cref="T:System.Collections.ICollection" />의 키를 포함하는 <see cref="T:System.Collections.IDictionary" />입니다.</returns>
 459     </member>
 460     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#Remove(System.Object)">
 461       <summary>
 462         <see cref="T:System.Collections.IDictionary" />에서 지정한 키를 가지는 요소를 제거합니다.</summary>
 463       <param name="key">제거할 요소의 키입니다.</param>
 464       <exception cref="T:System.ArgumentNullException">
 465         <paramref name="key" />가 null인 경우</exception>
 466     </member>
 467     <member name="P:System.Collections.Generic.Dictionary`2.System#Collections#IDictionary#Values">
 468       <summary>
 469         <see cref="T:System.Collections.ICollection" />의 값이 들어 있는 <see cref="T:System.Collections.IDictionary" />을 가져옵니다.</summary>
 470       <returns>
 471         <see cref="T:System.Collections.ICollection" />의 값을 포함하는 <see cref="T:System.Collections.IDictionary" />입니다.</returns>
 472     </member>
 473     <member name="M:System.Collections.Generic.Dictionary`2.System#Collections#IEnumerable#GetEnumerator">
 474       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
 475       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
 476     </member>
 477     <member name="M:System.Collections.Generic.Dictionary`2.TryGetValue(`0,`1@)">
 478       <summary>지정한 키와 연결된 값을 가져옵니다.</summary>
 479       <returns>true에 지정한 키가 있는 요소가 포함되어 있으면 <see cref="T:System.Collections.Generic.Dictionary`2" />이고, 그렇지 않으면 false입니다.</returns>
 480       <param name="key">가져올 값의 키입니다.</param>
 481       <param name="value">이 메서드가 반환될 때 지정된 키가 있으면 해당 키와 연결된 값을 포함하고, 그렇지 않으면 <paramref name="value" /> 매개 변수의 형식의 기본값을 포함합니다.이 매개 변수는 초기화되지 않은 상태로 전달됩니다.</param>
 482       <exception cref="T:System.ArgumentNullException">
 483         <paramref name="key" />가 null인 경우</exception>
 484     </member>
 485     <member name="P:System.Collections.Generic.Dictionary`2.Values">
 486       <summary>
 487         <see cref="T:System.Collections.Generic.Dictionary`2" />의 키를 포함하는 컬렉션을 가져옵니다.</summary>
 488       <returns>
 489         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 값을 포함하는 <see cref="T:System.Collections.Generic.Dictionary`2" />입니다.</returns>
 490     </member>
 491     <member name="T:System.Collections.Generic.Dictionary`2.Enumerator">
 492       <summary>
 493         <see cref="T:System.Collections.Generic.Dictionary`2" />의 요소를 열거합니다.</summary>
 494     </member>
 495     <member name="P:System.Collections.Generic.Dictionary`2.Enumerator.Current">
 496       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 497       <returns>
 498         <see cref="T:System.Collections.Generic.Dictionary`2" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
 499     </member>
 500     <member name="M:System.Collections.Generic.Dictionary`2.Enumerator.Dispose">
 501       <summary>
 502         <see cref="T:System.Collections.Generic.Dictionary`2.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
 503     </member>
 504     <member name="M:System.Collections.Generic.Dictionary`2.Enumerator.MoveNext">
 505       <summary>열거자를 <see cref="T:System.Collections.Generic.Dictionary`2" />의 다음 요소로 이동합니다.</summary>
 506       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
 507       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
 508     </member>
 509     <member name="P:System.Collections.Generic.Dictionary`2.Enumerator.System#Collections#IDictionaryEnumerator#Entry">
 510       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 511       <returns>사전에서 열거자의 현재 위치에 있는 요소인 <see cref="T:System.Collections.DictionaryEntry" />입니다.</returns>
 512       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
 513     </member>
 514     <member name="P:System.Collections.Generic.Dictionary`2.Enumerator.System#Collections#IDictionaryEnumerator#Key">
 515       <summary>열거자의 현재 위치에 있는 요소의 키를 가져옵니다.</summary>
 516       <returns>사전에서 열거자의 현재 위치에 있는 요소의 키입니다.</returns>
 517       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
 518     </member>
 519     <member name="P:System.Collections.Generic.Dictionary`2.Enumerator.System#Collections#IDictionaryEnumerator#Value">
 520       <summary>열거자의 현재 위치에 있는 요소의 값을 가져옵니다.</summary>
 521       <returns>사전에서 열거자의 현재 위치에 있는 요소의 값입니다.</returns>
 522       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
 523     </member>
 524     <member name="P:System.Collections.Generic.Dictionary`2.Enumerator.System#Collections#IEnumerator#Current">
 525       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 526       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소인 <see cref="T:System.Object" />입니다.</returns>
 527       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
 528     </member>
 529     <member name="M:System.Collections.Generic.Dictionary`2.Enumerator.System#Collections#IEnumerator#Reset">
 530       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
 531       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
 532     </member>
 533     <member name="T:System.Collections.Generic.Dictionary`2.KeyCollection">
 534       <summary>
 535         <see cref="T:System.Collections.Generic.Dictionary`2" />의 키 컬렉션을 나타냅니다.이 클래스는 상속될 수 없습니다.</summary>
 536     </member>
 537     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.#ctor(System.Collections.Generic.Dictionary{`0,`1})">
 538       <summary>지정한 <see cref="T:System.Collections.Generic.Dictionary`2" />의 키를 반영하는 <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 539       <param name="dictionary">해당 키가 새 <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />에 반영되는 <see cref="T:System.Collections.Generic.Dictionary`2" />입니다.</param>
 540       <exception cref="T:System.ArgumentNullException">
 541         <paramref name="dictionary" />가 null입니다.</exception>
 542     </member>
 543     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.CopyTo(`0[],System.Int32)">
 544       <summary>
 545         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" /> 요소를 지정한 배열 인덱스에서 시작하여 기존의 1차원 <see cref="T:System.Array" />에 복사합니다.</summary>
 546       <param name="array">
 547         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />에서 복사한 요소의 대상인 일차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 548       <param name="index">
 549         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 550       <exception cref="T:System.ArgumentNullException">
 551         <paramref name="array" />가 null입니다. </exception>
 552       <exception cref="T:System.ArgumentOutOfRangeException">
 553         <paramref name="index" />가 0보다 작은 경우</exception>
 554       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
 555     </member>
 556     <member name="P:System.Collections.Generic.Dictionary`2.KeyCollection.Count">
 557       <summary>
 558         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />에 포함된 요소 수를 가져옵니다.</summary>
 559       <returns>
 560         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />에 포함된 요소 수입니다.이 속성의 값을 검색하는 것은 O(1) 연산입니다.</returns>
 561     </member>
 562     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.GetEnumerator">
 563       <summary>
 564         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />을 반복하는 열거자를 반환합니다.</summary>
 565       <returns>
 566         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />에 대한 <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator" />입니다.</returns>
 567     </member>
 568     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Add(`0)">
 569       <summary>
 570         <see cref="T:System.Collections.Generic.ICollection`1" />에 항목을 추가합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
 571       <param name="item">
 572         <see cref="T:System.Collections.Generic.ICollection`1" />에 추가할 개체입니다.</param>
 573       <exception cref="T:System.NotSupportedException">항상 throw됩니다.</exception>
 574     </member>
 575     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Clear">
 576       <summary>
 577         <see cref="T:System.Collections.Generic.ICollection`1" />에서 항목을 모두 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
 578       <exception cref="T:System.NotSupportedException">항상 throw됩니다.</exception>
 579     </member>
 580     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Contains(`0)">
 581       <summary>
 582         <see cref="T:System.Collections.Generic.ICollection`1" />에 특정 값이 들어 있는지 여부를 확인합니다.</summary>
 583       <returns>
 584         <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
 585       <param name="item">
 586         <see cref="T:System.Collections.Generic.ICollection`1" />에서 찾을 개체입니다.</param>
 587     </member>
 588     <member name="P:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#IsReadOnly">
 589       <summary>
 590         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
 591       <returns>
 592         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 true를 반환합니다.</returns>
 593     </member>
 594     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Remove(`0)">
 595       <summary>
 596         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 특정 개체를 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
 597       <returns>
 598         <paramref name="item" />이 <see cref="T:System.Collections.Generic.ICollection`1" />에서 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="item" />이 원래 <see cref="T:System.Collections.Generic.ICollection`1" />에 없는 경우에도 false를 반환합니다.</returns>
 599       <param name="item">
 600         <see cref="T:System.Collections.Generic.ICollection`1" />에서 제거할 개체입니다.</param>
 601       <exception cref="T:System.NotSupportedException">항상 throw됩니다.</exception>
 602     </member>
 603     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
 604       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
 605       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
 606     </member>
 607     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
 608       <summary>특정 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
 609       <param name="array">
 610         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 일차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 611       <param name="index">
 612         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 613       <exception cref="T:System.ArgumentNullException">
 614         <paramref name="array" />가 null입니다.</exception>
 615       <exception cref="T:System.ArgumentOutOfRangeException">
 616         <paramref name="index" />가 0보다 작은 경우</exception>
 617       <exception cref="T:System.ArgumentException">
 618         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
 619     </member>
 620     <member name="P:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#ICollection#IsSynchronized">
 621       <summary>
 622         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
 623       <returns>
 624         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
 625     </member>
 626     <member name="P:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#ICollection#SyncRoot">
 627       <summary>
 628         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
 629       <returns>
 630         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.  <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
 631     </member>
 632     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.System#Collections#IEnumerable#GetEnumerator">
 633       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
 634       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
 635     </member>
 636     <member name="T:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator">
 637       <summary>
 638         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 요소를 열거합니다.</summary>
 639     </member>
 640     <member name="P:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator.Current">
 641       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 642       <returns>
 643         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
 644     </member>
 645     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator.Dispose">
 646       <summary>
 647         <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
 648     </member>
 649     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator.MoveNext">
 650       <summary>열거자를 <see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 다음 요소로 이동합니다.</summary>
 651       <returns>열거자가 다음 요소로 이동한 경우 true이(가) 반환되고, 컬렉션의 끝을 지난 경우 false이(가) 반환됩니다.</returns>
 652       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
 653     </member>
 654     <member name="P:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator.System#Collections#IEnumerator#Current">
 655       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 656       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
 657       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
 658     </member>
 659     <member name="M:System.Collections.Generic.Dictionary`2.KeyCollection.Enumerator.System#Collections#IEnumerator#Reset">
 660       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
 661       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
 662     </member>
 663     <member name="T:System.Collections.Generic.Dictionary`2.ValueCollection">
 664       <summary>
 665         <see cref="T:System.Collections.Generic.Dictionary`2" />의 값 컬렉션을 나타냅니다.이 클래스는 상속될 수 없습니다.</summary>
 666     </member>
 667     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.#ctor(System.Collections.Generic.Dictionary{`0,`1})">
 668       <summary>지정한 <see cref="T:System.Collections.Generic.Dictionary`2" />의 값을 반영하는 <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 669       <param name="dictionary">해당 값이 새 <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />에 반영되는 <see cref="T:System.Collections.Generic.Dictionary`2" />입니다.</param>
 670       <exception cref="T:System.ArgumentNullException">
 671         <paramref name="dictionary" />가 null입니다.</exception>
 672     </member>
 673     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.CopyTo(`1[],System.Int32)">
 674       <summary>
 675         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" /> 요소를 지정한 배열 인덱스에서 시작하여 기존의 1차원 <see cref="T:System.Array" />에 복사합니다.</summary>
 676       <param name="array">
 677         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />에서 복사한 요소의 대상인 일차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 678       <param name="index">
 679         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 680       <exception cref="T:System.ArgumentNullException">
 681         <paramref name="array" />가 null입니다.</exception>
 682       <exception cref="T:System.ArgumentOutOfRangeException">
 683         <paramref name="index" />가 0보다 작은 경우</exception>
 684       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
 685     </member>
 686     <member name="P:System.Collections.Generic.Dictionary`2.ValueCollection.Count">
 687       <summary>
 688         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />에 포함된 요소 수를 가져옵니다.</summary>
 689       <returns>
 690         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />에 포함된 요소 수입니다.</returns>
 691     </member>
 692     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.GetEnumerator">
 693       <summary>
 694         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />을 반복하는 열거자를 반환합니다.</summary>
 695       <returns>
 696         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />에 대한 <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator" />입니다.</returns>
 697     </member>
 698     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Add(`1)">
 699       <summary>
 700         <see cref="T:System.Collections.Generic.ICollection`1" />에 항목을 추가합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
 701       <param name="item">
 702         <see cref="T:System.Collections.Generic.ICollection`1" />에 추가할 개체입니다.</param>
 703       <exception cref="T:System.NotSupportedException">항상 throw됩니다.</exception>
 704     </member>
 705     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Clear">
 706       <summary>
 707         <see cref="T:System.Collections.Generic.ICollection`1" />에서 항목을 모두 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
 708       <exception cref="T:System.NotSupportedException">항상 throw됩니다.</exception>
 709     </member>
 710     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Contains(`1)">
 711       <summary>
 712         <see cref="T:System.Collections.Generic.ICollection`1" />에 특정 값이 들어 있는지 여부를 확인합니다.</summary>
 713       <returns>
 714         <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
 715       <param name="item">
 716         <see cref="T:System.Collections.Generic.ICollection`1" />에서 찾을 개체입니다.</param>
 717     </member>
 718     <member name="P:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#IsReadOnly">
 719       <summary>
 720         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
 721       <returns>
 722         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 기본 구현에서 이 속성은 언제나 true를 반환합니다.</returns>
 723     </member>
 724     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Remove(`1)">
 725       <summary>
 726         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 특정 개체를 제거합니다.이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
 727       <returns>
 728         <paramref name="item" />이 <see cref="T:System.Collections.Generic.ICollection`1" />에서 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="item" />이 원래 <see cref="T:System.Collections.Generic.ICollection`1" />에 없는 경우에도 false를 반환합니다.</returns>
 729       <param name="item">
 730         <see cref="T:System.Collections.Generic.ICollection`1" />에서 제거할 개체입니다.</param>
 731       <exception cref="T:System.NotSupportedException">항상 throw됩니다.</exception>
 732     </member>
 733     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
 734       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
 735       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
 736     </member>
 737     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
 738       <summary>특정 <see cref="T:System.Array" /> 인덱스에서 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
 739       <param name="array">
 740         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 일차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 741       <param name="index">
 742         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 743       <exception cref="T:System.ArgumentNullException">
 744         <paramref name="array" />가 null입니다.</exception>
 745       <exception cref="T:System.ArgumentOutOfRangeException">
 746         <paramref name="index" />가 0보다 작은 경우</exception>
 747       <exception cref="T:System.ArgumentException">
 748         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
 749     </member>
 750     <member name="P:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#ICollection#IsSynchronized">
 751       <summary>
 752         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
 753       <returns>
 754         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
 755     </member>
 756     <member name="P:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#ICollection#SyncRoot">
 757       <summary>
 758         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
 759       <returns>
 760         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.  <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
 761     </member>
 762     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.System#Collections#IEnumerable#GetEnumerator">
 763       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
 764       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
 765     </member>
 766     <member name="T:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator">
 767       <summary>
 768         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 요소를 열거합니다.</summary>
 769     </member>
 770     <member name="P:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator.Current">
 771       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 772       <returns>
 773         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
 774     </member>
 775     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator.Dispose">
 776       <summary>
 777         <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
 778     </member>
 779     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator.MoveNext">
 780       <summary>열거자를 <see cref="T:System.Collections.Generic.Dictionary`2.ValueCollection" />의 다음 요소로 이동합니다.</summary>
 781       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
 782       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
 783     </member>
 784     <member name="P:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator.System#Collections#IEnumerator#Current">
 785       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
 786       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
 787       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
 788     </member>
 789     <member name="M:System.Collections.Generic.Dictionary`2.ValueCollection.Enumerator.System#Collections#IEnumerator#Reset">
 790       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
 791       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
 792     </member>
 793     <member name="T:System.Collections.Generic.EqualityComparer`1">
 794       <summary>
 795         <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 제네릭 인터페이스의 구현에 대한 기본 클래스를 제공합니다.</summary>
 796       <typeparam name="T">비교할 개체의 형식입니다.</typeparam>
 797     </member>
 798     <member name="M:System.Collections.Generic.EqualityComparer`1.#ctor">
 799       <summary>
 800         <see cref="T:System.Collections.Generic.EqualityComparer`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 801     </member>
 802     <member name="P:System.Collections.Generic.EqualityComparer`1.Default">
 803       <summary>제네릭 인수에서 지정한 형식의 기본 같음 비교자를 반환합니다.</summary>
 804       <returns>
 805         <paramref name="T" /> 형식에 대한 <see cref="T:System.Collections.Generic.EqualityComparer`1" /> 클래스의 기본 인스턴스입니다.</returns>
 806     </member>
 807     <member name="M:System.Collections.Generic.EqualityComparer`1.Equals(`0,`0)">
 808       <summary>파생 클래스에서 재정의되면 <paramref name="T" /> 형식의 두 개체가 같은지를 확인합니다.</summary>
 809       <returns>지정한 개체가 같으면 true이고, 그렇지 않으면 false입니다.</returns>
 810       <param name="x">비교할 첫 번째 개체입니다.</param>
 811       <param name="y">비교할 두 번째 개체입니다.</param>
 812     </member>
 813     <member name="M:System.Collections.Generic.EqualityComparer`1.GetHashCode(`0)">
 814       <summary>파생 클래스에서 재정의되면 해시 테이블 같은 해시 알고리즘과 데이터 구조의 지정한 개체에 대한 해시 함수의 역할을 합니다.</summary>
 815       <returns>지정한 개체의 해시 코드입니다.</returns>
 816       <param name="obj">해시 코드를 가져오는 개체입니다.</param>
 817       <exception cref="T:System.ArgumentNullException">The type of <paramref name="obj" /> is a reference type and <paramref name="obj" /> is null.</exception>
 818     </member>
 819     <member name="M:System.Collections.Generic.EqualityComparer`1.System#Collections#IEqualityComparer#Equals(System.Object,System.Object)">
 820       <summary>지정한 개체가 같은지를 확인합니다.</summary>
 821       <returns>지정한 개체가 같으면 true이고, 그렇지 않으면 false입니다.</returns>
 822       <param name="x">비교할 첫 번째 개체입니다.</param>
 823       <param name="y">비교할 두 번째 개체입니다.</param>
 824       <exception cref="T:System.ArgumentException">
 825         <paramref name="x" /> or <paramref name="y" /> is of a type that cannot be cast to type <paramref name="T" />.</exception>
 826     </member>
 827     <member name="M:System.Collections.Generic.EqualityComparer`1.System#Collections#IEqualityComparer#GetHashCode(System.Object)">
 828       <summary>지정한 개체의 해시 코드를 반환합니다.</summary>
 829       <returns>지정한 개체의 해시 코드입니다.</returns>
 830       <param name="obj">해시 코드가 반환될 <see cref="T:System.Object" />입니다.</param>
 831       <exception cref="T:System.ArgumentNullException">The type of <paramref name="obj" /> is a reference type and <paramref name="obj" /> is null.-or-<paramref name="obj" /> is of a type that cannot be cast to type <paramref name="T" />.</exception>
 832     </member>
 833     <member name="T:System.Collections.Generic.HashSet`1">
 834       <summary>값 집합을 나타냅니다.이 형식에 대 한.NET Framework 소스 코드를 찾아보려면 참조는 Reference Source.</summary>
 835       <typeparam name="T">해시 집합에 있는 요소의 형식입니다.</typeparam>
 836     </member>
 837     <member name="M:System.Collections.Generic.HashSet`1.#ctor">
 838       <summary>비어 있으며 집합 형식에 대한 기본 같음 비교자를 사용하는 <see cref="T:System.Collections.Generic.HashSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 839     </member>
 840     <member name="M:System.Collections.Generic.HashSet`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
 841       <summary>집합 형식에 대한 기본 같음 비교자를 사용하고 지정된 컬렉션에서 복사한 요소가 들어 있으며 복사된 요소 수를 수용하기에 용량이 충분한 <see cref="T:System.Collections.Generic.HashSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 842       <param name="collection">해당 요소가 새 집합에 복사되는 컬렉션입니다.</param>
 843       <exception cref="T:System.ArgumentNullException">
 844         <paramref name="collection" />가 null인 경우</exception>
 845     </member>
 846     <member name="M:System.Collections.Generic.HashSet`1.#ctor(System.Collections.Generic.IEnumerable{`0},System.Collections.Generic.IEqualityComparer{`0})">
 847       <summary>집합 형식에 대한 지정된 같음 비교자를 사용하고 지정된 컬렉션에서 복사한 요소가 들어 있으며 복사된 요소 수를 수용하기에 용량이 충분한 <see cref="T:System.Collections.Generic.HashSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 848       <param name="collection">해당 요소가 새 집합에 복사되는 컬렉션입니다.</param>
 849       <param name="comparer">집합의 값을 비교하려면 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 구현을 사용하고, 집합 형식에 대한 기본 <see cref="T:System.Collections.Generic.EqualityComparer`1" /> 구현을 사용하려면 null을(를) 지정합니다.</param>
 850       <exception cref="T:System.ArgumentNullException">
 851         <paramref name="collection" />가 null인 경우</exception>
 852     </member>
 853     <member name="M:System.Collections.Generic.HashSet`1.#ctor(System.Collections.Generic.IEqualityComparer{`0})">
 854       <summary>비어 있으며 집합 형식에 대한 지정된 같음 비교자를 사용하는 <see cref="T:System.Collections.Generic.HashSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
 855       <param name="comparer">집합의 값을 비교하려면 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 구현을 사용하고, 집합 형식에 대한 기본 <see cref="T:System.Collections.Generic.EqualityComparer`1" /> 구현을 사용하려면 null을(를) 지정합니다.</param>
 856     </member>
 857     <member name="M:System.Collections.Generic.HashSet`1.Add(`0)">
 858       <summary>지정된 요소를 집합에 추가합니다.</summary>
 859       <returns>요소가 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에 추가되었으면 true이고, 요소가 이미 있으면 false입니다.</returns>
 860       <param name="item">집합에 추가할 요소입니다.</param>
 861     </member>
 862     <member name="M:System.Collections.Generic.HashSet`1.Clear">
 863       <summary>
 864         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 요소를 모두 제거합니다.</summary>
 865     </member>
 866     <member name="P:System.Collections.Generic.HashSet`1.Comparer">
 867       <summary>집합의 값이 같은지 확인하는 데 사용되는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 개체를 가져옵니다.</summary>
 868       <returns>집합의 값이 같은지 확인하는 데 사용되는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 개체입니다.</returns>
 869     </member>
 870     <member name="M:System.Collections.Generic.HashSet`1.Contains(`0)">
 871       <summary>
 872         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에 지정된 요소가 포함되어 있는지 확인합니다.</summary>
 873       <returns>
 874         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에 지정된 요소가 들어 있으면 true이고, 그렇지 않으면 false입니다.</returns>
 875       <param name="item">
 876         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 찾을 요소입니다.</param>
 877     </member>
 878     <member name="M:System.Collections.Generic.HashSet`1.CopyTo(`0[])">
 879       <summary>
 880         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체의 요소를 배열에 복사합니다.</summary>
 881       <param name="array">
 882         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 883       <exception cref="T:System.ArgumentNullException">
 884         <paramref name="array" />가 null인 경우</exception>
 885     </member>
 886     <member name="M:System.Collections.Generic.HashSet`1.CopyTo(`0[],System.Int32)">
 887       <summary>지정된 배열 인덱스에서 시작하여 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체의 요소를 배열에 복사합니다.</summary>
 888       <param name="array">
 889         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 890       <param name="arrayIndex">
 891         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 892       <exception cref="T:System.ArgumentNullException">
 893         <paramref name="array" />가 null인 경우</exception>
 894       <exception cref="T:System.ArgumentOutOfRangeException">
 895         <paramref name="arrayIndex" />가 0보다 작은 경우</exception>
 896       <exception cref="T:System.ArgumentException">
 897         <paramref name="arrayIndex" />가 대상 <paramref name="array" />의 길이보다 큰 경우</exception>
 898     </member>
 899     <member name="M:System.Collections.Generic.HashSet`1.CopyTo(`0[],System.Int32,System.Int32)">
 900       <summary>지정된 배열 인덱스에서 시작하여 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 지정된 수의 요소를 배열에 복사합니다.</summary>
 901       <param name="array">
 902         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
 903       <param name="arrayIndex">
 904         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
 905       <param name="count">
 906         <paramref name="array" />에 복사할 요소의 수입니다.</param>
 907       <exception cref="T:System.ArgumentNullException">
 908         <paramref name="array" />가 null인 경우</exception>
 909       <exception cref="T:System.ArgumentOutOfRangeException">
 910         <paramref name="arrayIndex" />가 0보다 작은 경우또는<paramref name="count" />가 0보다 작은 경우</exception>
 911       <exception cref="T:System.ArgumentException">
 912         <paramref name="arrayIndex" />가 대상 <paramref name="array" />의 길이보다 큰 경우또는<paramref name="count" />가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
 913     </member>
 914     <member name="P:System.Collections.Generic.HashSet`1.Count">
 915       <summary>집합에 포함된 요소 수를 가져옵니다.</summary>
 916       <returns>집합에 포함된 요소 수입니다.</returns>
 917     </member>
 918     <member name="M:System.Collections.Generic.HashSet`1.ExceptWith(System.Collections.Generic.IEnumerable{`0})">
 919       <summary>현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 지정된 컬렉션의 모든 요소를 제거합니다.</summary>
 920       <param name="other">
 921         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 제거할 항목의 컬렉션입니다.</param>
 922       <exception cref="T:System.ArgumentNullException">
 923         <paramref name="other" />가 null인 경우</exception>
 924     </member>
 925     <member name="M:System.Collections.Generic.HashSet`1.GetEnumerator">
 926       <summary>
 927         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 반복되는 열거자를 반환합니다.</summary>
 928       <returns>
 929         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에 대한 <see cref="T:System.Collections.Generic.HashSet`1.Enumerator" /> 개체입니다.</returns>
 930     </member>
 931     <member name="M:System.Collections.Generic.HashSet`1.IntersectWith(System.Collections.Generic.IEnumerable{`0})">
 932       <summary>현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체를 수정하여 해당 개체와 지정된 컬렉션에 동시에 있는 요소만 포함합니다.</summary>
 933       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
 934       <exception cref="T:System.ArgumentNullException">
 935         <paramref name="other" />가 null인 경우</exception>
 936     </member>
 937     <member name="M:System.Collections.Generic.HashSet`1.IsProperSubsetOf(System.Collections.Generic.IEnumerable{`0})">
 938       <summary>
 939         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 지정된 컬렉션의 적합한 하위 집합인지 확인합니다.</summary>
 940       <returns>
 941         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 <paramref name="other" />의 적합한 하위 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
 942       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
 943       <exception cref="T:System.ArgumentNullException">
 944         <paramref name="other" />가 null인 경우</exception>
 945     </member>
 946     <member name="M:System.Collections.Generic.HashSet`1.IsProperSupersetOf(System.Collections.Generic.IEnumerable{`0})">
 947       <summary>
 948         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 지정된 컬렉션의 적합한 상위 집합인지 확인합니다.</summary>
 949       <returns>
 950         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 <paramref name="other" />의 적합한 상위 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
 951       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다. </param>
 952       <exception cref="T:System.ArgumentNullException">
 953         <paramref name="other" />가 null인 경우</exception>
 954     </member>
 955     <member name="M:System.Collections.Generic.HashSet`1.IsSubsetOf(System.Collections.Generic.IEnumerable{`0})">
 956       <summary>
 957         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 지정된 컬렉션의 하위 집합인지 확인합니다.</summary>
 958       <returns>
 959         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 <paramref name="other" />의 하위 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
 960       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
 961       <exception cref="T:System.ArgumentNullException">
 962         <paramref name="other" />가 null인 경우</exception>
 963     </member>
 964     <member name="M:System.Collections.Generic.HashSet`1.IsSupersetOf(System.Collections.Generic.IEnumerable{`0})">
 965       <summary>
 966         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 지정된 컬렉션의 상위 집합인지 확인합니다.</summary>
 967       <returns>
 968         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 <paramref name="other" />의 상위 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
 969       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
 970       <exception cref="T:System.ArgumentNullException">
 971         <paramref name="other" />가 null인 경우</exception>
 972     </member>
 973     <member name="M:System.Collections.Generic.HashSet`1.Overlaps(System.Collections.Generic.IEnumerable{`0})">
 974       <summary>현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 지정된 컬렉션이 공통 요소를 공유하는지 확인합니다.</summary>
 975       <returns>
 976         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 <paramref name="other" />이(가) 요소를 하나 이상 공유하면 true이고, 그렇지 않으면 false입니다.</returns>
 977       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
 978       <exception cref="T:System.ArgumentNullException">
 979         <paramref name="other" />가 null인 경우</exception>
 980     </member>
 981     <member name="M:System.Collections.Generic.HashSet`1.Remove(`0)">
 982       <summary>
 983         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체에서 지정된 요소를 제거합니다.</summary>
 984       <returns>요소를 성공적으로 찾아서 제거한 경우 true이고, 그렇지 않으면 false입니다.<paramref name="item" /> 개체에 <see cref="T:System.Collections.Generic.HashSet`1" />이(가) 없으면 이 메서드는 false을(를) 반환합니다.</returns>
 985       <param name="item">제거할 요소입니다.</param>
 986     </member>
 987     <member name="M:System.Collections.Generic.HashSet`1.RemoveWhere(System.Predicate{`0})">
 988       <summary>
 989         <see cref="T:System.Collections.Generic.HashSet`1" /> 컬렉션에서 지정된 조건자에 정의된 조건과 일치하는 요소를 모두 제거합니다.</summary>
 990       <returns>
 991         <see cref="T:System.Collections.Generic.HashSet`1" /> 컬렉션에서 제거된 요소의 수입니다.</returns>
 992       <param name="match">제거할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
 993       <exception cref="T:System.ArgumentNullException">
 994         <paramref name="match" />가 null인 경우</exception>
 995     </member>
 996     <member name="M:System.Collections.Generic.HashSet`1.SetEquals(System.Collections.Generic.IEnumerable{`0})">
 997       <summary>
 998         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 지정된 컬렉션에 같은 요소가 포함되어 있는지 확인합니다.</summary>
 999       <returns>
1000         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체가 <paramref name="other" />과(와) 같으면 true이고, 그렇지 않으면 false입니다.</returns>
1001       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
1002       <exception cref="T:System.ArgumentNullException">
1003         <paramref name="other" />가 null인 경우</exception>
1004     </member>
1005     <member name="M:System.Collections.Generic.HashSet`1.SymmetricExceptWith(System.Collections.Generic.IEnumerable{`0})">
1006       <summary>현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체를 수정하여 해당 개체와 지정된 컬렉션 중 하나에 있는 요소만 포함합니다.</summary>
1007       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
1008       <exception cref="T:System.ArgumentNullException">
1009         <paramref name="other" />가 null인 경우</exception>
1010     </member>
1011     <member name="M:System.Collections.Generic.HashSet`1.System#Collections#Generic#ICollection{T}#Add(`0)">
1012       <summary>
1013         <see cref="T:System.Collections.Generic.ICollection`1" /> 개체에 항목을 추가합니다.</summary>
1014       <param name="item">
1015         <see cref="T:System.Collections.Generic.ICollection`1" /> 개체에 추가할 개체입니다.</param>
1016       <exception cref="T:System.NotSupportedException">
1017         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용인 경우</exception>
1018     </member>
1019     <member name="P:System.Collections.Generic.HashSet`1.System#Collections#Generic#ICollection{T}#IsReadOnly">
1020       <summary>컬렉션이 읽기 전용인지를 나타내는 값을 가져옵니다.</summary>
1021       <returns>컬렉션이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.</returns>
1022     </member>
1023     <member name="M:System.Collections.Generic.HashSet`1.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
1024       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
1025       <returns>컬렉션을 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" /> 개체입니다.</returns>
1026     </member>
1027     <member name="M:System.Collections.Generic.HashSet`1.System#Collections#IEnumerable#GetEnumerator">
1028       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
1029       <returns>컬렉션을 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" /> 개체입니다.</returns>
1030     </member>
1031     <member name="M:System.Collections.Generic.HashSet`1.TrimExcess">
1032       <summary>
1033         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체의 용량을 실제로 포함된 요소 수로 설정하고 구현별로 다른 근방 값으로 반올림합니다.</summary>
1034     </member>
1035     <member name="M:System.Collections.Generic.HashSet`1.UnionWith(System.Collections.Generic.IEnumerable{`0})">
1036       <summary>현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체를 수정하여 해당 개체와 지정된 컬렉션에 있는 모든 요소를 포함시킵니다.</summary>
1037       <param name="other">현재 <see cref="T:System.Collections.Generic.HashSet`1" /> 개체와 비교할 컬렉션입니다.</param>
1038       <exception cref="T:System.ArgumentNullException">
1039         <paramref name="other" />가 null인 경우</exception>
1040     </member>
1041     <member name="T:System.Collections.Generic.HashSet`1.Enumerator">
1042       <summary>
1043         <see cref="T:System.Collections.Generic.HashSet`1" /> 개체의 요소를 열거합니다.</summary>
1044       <filterpriority>2</filterpriority>
1045     </member>
1046     <member name="P:System.Collections.Generic.HashSet`1.Enumerator.Current">
1047       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
1048       <returns>
1049         <see cref="T:System.Collections.Generic.HashSet`1" /> 컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
1050     </member>
1051     <member name="M:System.Collections.Generic.HashSet`1.Enumerator.Dispose">
1052       <summary>
1053         <see cref="T:System.Collections.Generic.HashSet`1.Enumerator" /> 개체에 사용되는 리소스를 모두 해제합니다.</summary>
1054     </member>
1055     <member name="M:System.Collections.Generic.HashSet`1.Enumerator.MoveNext">
1056       <summary>열거자를 <see cref="T:System.Collections.Generic.HashSet`1" /> 컬렉션의 다음 요소로 이동합니다.</summary>
1057       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
1058       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
1059     </member>
1060     <member name="P:System.Collections.Generic.HashSet`1.Enumerator.System#Collections#IEnumerator#Current">
1061       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
1062       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소인 <see cref="T:System.Object" />입니다.</returns>
1063       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
1064     </member>
1065     <member name="M:System.Collections.Generic.HashSet`1.Enumerator.System#Collections#IEnumerator#Reset">
1066       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
1067       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
1068     </member>
1069     <member name="T:System.Collections.Generic.LinkedList`1">
1070       <summary>이중 연결 목록을 나타냅니다.</summary>
1071       <typeparam name="T">링크된 목록의 요소 형식을 지정합니다.</typeparam>
1072       <filterpriority>1</filterpriority>
1073     </member>
1074     <member name="M:System.Collections.Generic.LinkedList`1.#ctor">
1075       <summary>비어 있는 <see cref="T:System.Collections.Generic.LinkedList`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1076     </member>
1077     <member name="M:System.Collections.Generic.LinkedList`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
1078       <summary>지정한 <see cref="T:System.Collections.IEnumerable" />에서 복사된 요소가 포함되어 있고 복사된 요소의 수를 수용할 수 있는 충분한 용량을 가지는 <see cref="T:System.Collections.Generic.LinkedList`1" /> 클래스의 새 인스턴스를 초기화합니다. </summary>
1079       <param name="collection">요소가 새 <see cref="T:System.Collections.Generic.LinkedList`1" />에 복사되는 <see cref="T:System.Collections.IEnumerable" />입니다.</param>
1080       <exception cref="T:System.ArgumentNullException">
1081         <paramref name="collection" />가 null입니다.</exception>
1082     </member>
1083     <member name="M:System.Collections.Generic.LinkedList`1.AddAfter(System.Collections.Generic.LinkedListNode{`0},System.Collections.Generic.LinkedListNode{`0})">
1084       <summary>
1085         <see cref="T:System.Collections.Generic.LinkedList`1" />의 지정한 기존 노드 다음에 지정한 새 노드를 추가합니다.</summary>
1086       <param name="node">
1087         <paramref name="newNode" />를 삽입할 위치 앞에 있는 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1088       <param name="newNode">
1089         <see cref="T:System.Collections.Generic.LinkedList`1" />에 추가할 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1090       <exception cref="T:System.ArgumentNullException">
1091         <paramref name="node" />가 null입니다.또는<paramref name="newNode" />가 null입니다.</exception>
1092       <exception cref="T:System.InvalidOperationException">
1093         <paramref name="node" />가 <see cref="T:System.Collections.Generic.LinkedList`1" />에 없는 경우또는<paramref name="newNode" />가 다른 <see cref="T:System.Collections.Generic.LinkedList`1" />에 속하는 경우</exception>
1094     </member>
1095     <member name="M:System.Collections.Generic.LinkedList`1.AddAfter(System.Collections.Generic.LinkedListNode{`0},`0)">
1096       <summary>
1097         <see cref="T:System.Collections.Generic.LinkedList`1" />의 지정한 기존 노드 다음에 지정한 값이 포함된 새 노드를 추가합니다.</summary>
1098       <returns>
1099         <paramref name="value" />가 포함된 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</returns>
1100       <param name="node">
1101         <paramref name="value" />가 포함된 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />을 삽입할 위치 앞에 있는 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1102       <param name="value">
1103         <see cref="T:System.Collections.Generic.LinkedList`1" />에 추가할 값입니다.</param>
1104       <exception cref="T:System.ArgumentNullException">
1105         <paramref name="node" />가 null입니다.</exception>
1106       <exception cref="T:System.InvalidOperationException">
1107         <paramref name="node" />가 <see cref="T:System.Collections.Generic.LinkedList`1" />에 없는 경우</exception>
1108     </member>
1109     <member name="M:System.Collections.Generic.LinkedList`1.AddBefore(System.Collections.Generic.LinkedListNode{`0},System.Collections.Generic.LinkedListNode{`0})">
1110       <summary>
1111         <see cref="T:System.Collections.Generic.LinkedList`1" />의 지정한 기존 노드 앞에 지정한 새 노드를 추가합니다.</summary>
1112       <param name="node">
1113         <paramref name="newNode" />를 삽입할 위치 뒤에 있는 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1114       <param name="newNode">
1115         <see cref="T:System.Collections.Generic.LinkedList`1" />에 추가할 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1116       <exception cref="T:System.ArgumentNullException">
1117         <paramref name="node" />가 null입니다.또는<paramref name="newNode" />가 null입니다.</exception>
1118       <exception cref="T:System.InvalidOperationException">
1119         <paramref name="node" />가 <see cref="T:System.Collections.Generic.LinkedList`1" />에 없는 경우또는<paramref name="newNode" />가 다른 <see cref="T:System.Collections.Generic.LinkedList`1" />에 속하는 경우</exception>
1120     </member>
1121     <member name="M:System.Collections.Generic.LinkedList`1.AddBefore(System.Collections.Generic.LinkedListNode{`0},`0)">
1122       <summary>
1123         <see cref="T:System.Collections.Generic.LinkedList`1" />의 지정한 기존 노드 앞에 지정한 값이 포함된 새 노드를 추가합니다.</summary>
1124       <returns>
1125         <paramref name="value" />가 포함된 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</returns>
1126       <param name="node">
1127         <paramref name="value" />가 포함된 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />을 삽입할 위치 뒤에 있는 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1128       <param name="value">
1129         <see cref="T:System.Collections.Generic.LinkedList`1" />에 추가할 값입니다.</param>
1130       <exception cref="T:System.ArgumentNullException">
1131         <paramref name="node" />가 null입니다.</exception>
1132       <exception cref="T:System.InvalidOperationException">
1133         <paramref name="node" />가 <see cref="T:System.Collections.Generic.LinkedList`1" />에 없는 경우</exception>
1134     </member>
1135     <member name="M:System.Collections.Generic.LinkedList`1.AddFirst(System.Collections.Generic.LinkedListNode{`0})">
1136       <summary>
1137         <see cref="T:System.Collections.Generic.LinkedList`1" />의 시작 위치에 지정한 새 노드를 추가합니다.</summary>
1138       <param name="node">
1139         <see cref="T:System.Collections.Generic.LinkedList`1" />의 시작 위치에 추가할 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1140       <exception cref="T:System.ArgumentNullException">
1141         <paramref name="node" />가 null입니다.</exception>
1142       <exception cref="T:System.InvalidOperationException">
1143         <paramref name="node" />가 다른 <see cref="T:System.Collections.Generic.LinkedList`1" />에 속하는 경우</exception>
1144     </member>
1145     <member name="M:System.Collections.Generic.LinkedList`1.AddFirst(`0)">
1146       <summary>
1147         <see cref="T:System.Collections.Generic.LinkedList`1" />의 시작 위치에 지정한 값이 포함된 새 노드를 추가합니다.</summary>
1148       <returns>
1149         <paramref name="value" />가 포함된 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</returns>
1150       <param name="value">
1151         <see cref="T:System.Collections.Generic.LinkedList`1" />의 시작 위치에 추가할 값입니다.</param>
1152     </member>
1153     <member name="M:System.Collections.Generic.LinkedList`1.AddLast(System.Collections.Generic.LinkedListNode{`0})">
1154       <summary>
1155         <see cref="T:System.Collections.Generic.LinkedList`1" />의 끝에 지정한 새 노드를 추가합니다.</summary>
1156       <param name="node">
1157         <see cref="T:System.Collections.Generic.LinkedList`1" />의 끝에 추가할 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1158       <exception cref="T:System.ArgumentNullException">
1159         <paramref name="node" />가 null입니다.</exception>
1160       <exception cref="T:System.InvalidOperationException">
1161         <paramref name="node" />가 다른 <see cref="T:System.Collections.Generic.LinkedList`1" />에 속하는 경우</exception>
1162     </member>
1163     <member name="M:System.Collections.Generic.LinkedList`1.AddLast(`0)">
1164       <summary>
1165         <see cref="T:System.Collections.Generic.LinkedList`1" />의 끝에 지정한 값이 포함된 새 노드를 추가합니다.</summary>
1166       <returns>
1167         <paramref name="value" />가 포함된 새 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</returns>
1168       <param name="value">
1169         <see cref="T:System.Collections.Generic.LinkedList`1" />의 끝에 추가할 값입니다.</param>
1170     </member>
1171     <member name="M:System.Collections.Generic.LinkedList`1.Clear">
1172       <summary>
1173         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 노드를 모두 제거합니다.</summary>
1174     </member>
1175     <member name="M:System.Collections.Generic.LinkedList`1.Contains(`0)">
1176       <summary>값이 <see cref="T:System.Collections.Generic.LinkedList`1" />에 있는지 여부를 확인합니다.</summary>
1177       <returns>
1178         <paramref name="value" />가 <see cref="T:System.Collections.Generic.LinkedList`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
1179       <param name="value">
1180         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 찾을 수 있는 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1181     </member>
1182     <member name="M:System.Collections.Generic.LinkedList`1.CopyTo(`0[],System.Int32)">
1183       <summary>대상 배열의 지정된 인덱스에서 시작하여 전체 <see cref="T:System.Collections.Generic.LinkedList`1" />을 호환되는 1차원 <see cref="T:System.Array" />에 복사합니다.</summary>
1184       <param name="array">
1185         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 복사한 요소의 대상인 1차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1186       <param name="index">
1187         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
1188       <exception cref="T:System.ArgumentNullException">
1189         <paramref name="array" />가 null입니다.</exception>
1190       <exception cref="T:System.ArgumentOutOfRangeException">
1191         <paramref name="index" />가 0보다 작은 경우</exception>
1192       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.LinkedList`1" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
1193     </member>
1194     <member name="P:System.Collections.Generic.LinkedList`1.Count">
1195       <summary>
1196         <see cref="T:System.Collections.Generic.LinkedList`1" />에 실제로 포함된 노드의 수를 가져옵니다.</summary>
1197       <returns>
1198         <see cref="T:System.Collections.Generic.LinkedList`1" />에 실제로 포함된 노드의 수입니다.</returns>
1199     </member>
1200     <member name="M:System.Collections.Generic.LinkedList`1.Find(`0)">
1201       <summary>지정한 값이 포함된 첫 번째 노드를 찾습니다.</summary>
1202       <returns>지정한 값이 있으면 해당 값이 포함된 첫 번째 <see cref="T:System.Collections.Generic.LinkedListNode`1" />이고, 그렇지 않으면 null입니다.</returns>
1203       <param name="value">
1204         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 찾을 수 있는 값입니다.</param>
1205     </member>
1206     <member name="M:System.Collections.Generic.LinkedList`1.FindLast(`0)">
1207       <summary>지정한 값이 포함된 마지막 노드를 찾습니다.</summary>
1208       <returns>지정한 값이 있으면 해당 값이 포함된 마지막 <see cref="T:System.Collections.Generic.LinkedListNode`1" />이고, 그렇지 않으면 null입니다.</returns>
1209       <param name="value">
1210         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 찾을 수 있는 값입니다.</param>
1211     </member>
1212     <member name="P:System.Collections.Generic.LinkedList`1.First">
1213       <summary>
1214         <see cref="T:System.Collections.Generic.LinkedList`1" />의 첫 번째 노드를 가져옵니다.</summary>
1215       <returns>
1216         <see cref="T:System.Collections.Generic.LinkedList`1" />의 첫 번째 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</returns>
1217     </member>
1218     <member name="M:System.Collections.Generic.LinkedList`1.GetEnumerator">
1219       <summary>
1220         <see cref="T:System.Collections.Generic.LinkedList`1" />을 반복하는 열거자를 반환합니다.</summary>
1221       <returns>
1222         <see cref="T:System.Collections.Generic.LinkedList`1" />에 대한 <see cref="T:System.Collections.Generic.LinkedList`1.Enumerator" />입니다.</returns>
1223     </member>
1224     <member name="P:System.Collections.Generic.LinkedList`1.Last">
1225       <summary>
1226         <see cref="T:System.Collections.Generic.LinkedList`1" />의 마지막 노드를 가져옵니다.</summary>
1227       <returns>
1228         <see cref="T:System.Collections.Generic.LinkedList`1" />의 마지막 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</returns>
1229     </member>
1230     <member name="M:System.Collections.Generic.LinkedList`1.Remove(System.Collections.Generic.LinkedListNode{`0})">
1231       <summary>
1232         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 지정된 노드를 제거합니다.</summary>
1233       <param name="node">
1234         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 제거할 <see cref="T:System.Collections.Generic.LinkedListNode`1" />입니다.</param>
1235       <exception cref="T:System.ArgumentNullException">
1236         <paramref name="node" />가 null입니다.</exception>
1237       <exception cref="T:System.InvalidOperationException">
1238         <paramref name="node" />가 <see cref="T:System.Collections.Generic.LinkedList`1" />에 없는 경우</exception>
1239     </member>
1240     <member name="M:System.Collections.Generic.LinkedList`1.Remove(`0)">
1241       <summary>
1242         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 맨 처음 발견되는 지정된 값을 제거합니다.</summary>
1243       <returns>
1244         <paramref name="value" />가 포함된 요소가 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.  이 메서드는 <paramref name="value" />가 원래 <see cref="T:System.Collections.Generic.LinkedList`1" />에 없는 경우에도 false를 반환합니다.</returns>
1245       <param name="value">
1246         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 제거할 값입니다.</param>
1247     </member>
1248     <member name="M:System.Collections.Generic.LinkedList`1.RemoveFirst">
1249       <summary>
1250         <see cref="T:System.Collections.Generic.LinkedList`1" />의 시작 위치에서 노드를 제거합니다.</summary>
1251       <exception cref="T:System.InvalidOperationException">
1252         <see cref="T:System.Collections.Generic.LinkedList`1" />이 비어 있는 경우</exception>
1253     </member>
1254     <member name="M:System.Collections.Generic.LinkedList`1.RemoveLast">
1255       <summary>
1256         <see cref="T:System.Collections.Generic.LinkedList`1" />의 끝에서 노드를 제거합니다.</summary>
1257       <exception cref="T:System.InvalidOperationException">
1258         <see cref="T:System.Collections.Generic.LinkedList`1" />이 비어 있는 경우</exception>
1259     </member>
1260     <member name="M:System.Collections.Generic.LinkedList`1.System#Collections#Generic#ICollection{T}#Add(`0)">
1261       <summary>
1262         <see cref="T:System.Collections.Generic.ICollection`1" />의 끝에 항목을 추가합니다.</summary>
1263       <param name="value">
1264         <see cref="T:System.Collections.Generic.ICollection`1" />의 끝에 추가할 값입니다.</param>
1265     </member>
1266     <member name="P:System.Collections.Generic.LinkedList`1.System#Collections#Generic#ICollection{T}#IsReadOnly">
1267       <summary>
1268         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
1269       <returns>
1270         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.LinkedList`1" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
1271     </member>
1272     <member name="M:System.Collections.Generic.LinkedList`1.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
1273       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
1274       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
1275     </member>
1276     <member name="M:System.Collections.Generic.LinkedList`1.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
1277       <summary>특정 <see cref="T:System.Array" /> 인덱스에서 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
1278       <param name="array">
1279         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 일차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1280       <param name="index">
1281         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
1282       <exception cref="T:System.ArgumentNullException">
1283         <paramref name="array" />가 null입니다.</exception>
1284       <exception cref="T:System.ArgumentOutOfRangeException">
1285         <paramref name="index" />가 0보다 작은 경우</exception>
1286       <exception cref="T:System.ArgumentException">
1287         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
1288     </member>
1289     <member name="P:System.Collections.Generic.LinkedList`1.System#Collections#ICollection#IsSynchronized">
1290       <summary>
1291         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
1292       <returns>
1293         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.LinkedList`1" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
1294     </member>
1295     <member name="P:System.Collections.Generic.LinkedList`1.System#Collections#ICollection#SyncRoot">
1296       <summary>
1297         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
1298       <returns>
1299         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.  <see cref="T:System.Collections.Generic.LinkedList`1" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
1300     </member>
1301     <member name="M:System.Collections.Generic.LinkedList`1.System#Collections#IEnumerable#GetEnumerator">
1302       <summary>링크된 목록을 컬렉션으로 반복하는 열거자를 반환합니다.</summary>
1303       <returns>링크된 목록을 컬렉션으로 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
1304     </member>
1305     <member name="T:System.Collections.Generic.LinkedList`1.Enumerator">
1306       <summary>
1307         <see cref="T:System.Collections.Generic.LinkedList`1" />의 요소를 열거합니다.</summary>
1308     </member>
1309     <member name="P:System.Collections.Generic.LinkedList`1.Enumerator.Current">
1310       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
1311       <returns>
1312         <see cref="T:System.Collections.Generic.LinkedList`1" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
1313     </member>
1314     <member name="M:System.Collections.Generic.LinkedList`1.Enumerator.Dispose">
1315       <summary>
1316         <see cref="T:System.Collections.Generic.LinkedList`1.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
1317     </member>
1318     <member name="M:System.Collections.Generic.LinkedList`1.Enumerator.MoveNext">
1319       <summary>열거자를 <see cref="T:System.Collections.Generic.LinkedList`1" />의 다음 요소로 이동합니다.</summary>
1320       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
1321       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
1322     </member>
1323     <member name="P:System.Collections.Generic.LinkedList`1.Enumerator.System#Collections#IEnumerator#Current">
1324       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
1325       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
1326       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
1327     </member>
1328     <member name="M:System.Collections.Generic.LinkedList`1.Enumerator.System#Collections#IEnumerator#Reset">
1329       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.이 클래스는 상속될 수 없습니다.</summary>
1330       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
1331     </member>
1332     <member name="T:System.Collections.Generic.LinkedListNode`1">
1333       <summary>
1334         <see cref="T:System.Collections.Generic.LinkedList`1" />의 노드를 나타냅니다.이 클래스는 상속될 수 없습니다.</summary>
1335       <typeparam name="T">링크된 목록의 요소 형식을 지정합니다.</typeparam>
1336       <filterpriority>1</filterpriority>
1337     </member>
1338     <member name="M:System.Collections.Generic.LinkedListNode`1.#ctor(`0)">
1339       <summary>지정한 값을 포함하는 <see cref="T:System.Collections.Generic.LinkedListNode`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1340       <param name="value">
1341         <see cref="T:System.Collections.Generic.LinkedListNode`1" />에 포함할 값입니다.</param>
1342     </member>
1343     <member name="P:System.Collections.Generic.LinkedListNode`1.List">
1344       <summary>
1345         <see cref="T:System.Collections.Generic.LinkedListNode`1" />이 속하는 <see cref="T:System.Collections.Generic.LinkedList`1" />을 가져옵니다.</summary>
1346       <returns>
1347         <see cref="T:System.Collections.Generic.LinkedListNode`1" />이 속하는 <see cref="T:System.Collections.Generic.LinkedList`1" />에 대한 참조이거나, <see cref="T:System.Collections.Generic.LinkedListNode`1" />이 링크되어 있지 않으면 null입니다.</returns>
1348     </member>
1349     <member name="P:System.Collections.Generic.LinkedListNode`1.Next">
1350       <summary>
1351         <see cref="T:System.Collections.Generic.LinkedList`1" />의 다음 노드를 가져옵니다.</summary>
1352       <returns>
1353         <see cref="T:System.Collections.Generic.LinkedList`1" />의 다음 노드에 대한 참조이거나, 현재 노드가 <see cref="T:System.Collections.Generic.LinkedList`1" />의 마지막 요소(<see cref="P:System.Collections.Generic.LinkedList`1.Last" />)이면 null입니다.</returns>
1354     </member>
1355     <member name="P:System.Collections.Generic.LinkedListNode`1.Previous">
1356       <summary>
1357         <see cref="T:System.Collections.Generic.LinkedList`1" />의 이전 노드를 가져옵니다.</summary>
1358       <returns>
1359         <see cref="T:System.Collections.Generic.LinkedList`1" />의 이전 노드에 대한 참조이거나, 현재 노드가 <see cref="T:System.Collections.Generic.LinkedList`1" />의 첫 번째 요소(<see cref="P:System.Collections.Generic.LinkedList`1.First" />)이면 null입니다.</returns>
1360     </member>
1361     <member name="P:System.Collections.Generic.LinkedListNode`1.Value">
1362       <summary>노드에 포함된 값을 가져옵니다.</summary>
1363       <returns>노드에 포함된 값입니다.</returns>
1364     </member>
1365     <member name="T:System.Collections.Generic.List`1">
1366       <summary>인덱스로 액세스할 수 있는 강력한 형식의 개체 목록을 나타냅니다.목록의 검색, 정렬 및 조작에 사용할 수 있는 메서드를 제공합니다.이 형식에 대 한.NET Framework 소스 코드를 찾아보려면 참조는 참조 원본.</summary>
1367       <typeparam name="T">목록에 있는 요소의 형식입니다.</typeparam>
1368       <filterpriority>1</filterpriority>
1369     </member>
1370     <member name="M:System.Collections.Generic.List`1.#ctor">
1371       <summary>비어 있는 상태에서 기본 초기 용량을 가지는 <see cref="T:System.Collections.Generic.List`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1372     </member>
1373     <member name="M:System.Collections.Generic.List`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
1374       <summary>지정된 컬렉션에서 복사한 요소를 포함하고 복사한 요소를 모두 수용할 수 있을 정도의 용량을 가진 <see cref="T:System.Collections.Generic.List`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1375       <param name="collection">요소가 새 목록에 복사되는 컬렉션입니다.</param>
1376       <exception cref="T:System.ArgumentNullException">
1377         <paramref name="collection" />가 null인 경우</exception>
1378     </member>
1379     <member name="M:System.Collections.Generic.List`1.#ctor(System.Int32)">
1380       <summary>비어 있는 상태에서 지정한 초기 용량을 가지는 <see cref="T:System.Collections.Generic.List`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1381       <param name="capacity">새 목록에 처음부터 저장할 수 있는 요소의 수입니다.</param>
1382       <exception cref="T:System.ArgumentOutOfRangeException">
1383         <paramref name="capacity" />가 0보다 작습니다. </exception>
1384     </member>
1385     <member name="M:System.Collections.Generic.List`1.Add(`0)">
1386       <summary>개체를 <see cref="T:System.Collections.Generic.List`1" />의 끝 부분에 추가합니다.</summary>
1387       <param name="item">
1388         <see cref="T:System.Collections.Generic.List`1" />의 끝에 추가할 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1389     </member>
1390     <member name="M:System.Collections.Generic.List`1.AddRange(System.Collections.Generic.IEnumerable{`0})">
1391       <summary>지정된 컬렉션의 요소를 <see cref="T:System.Collections.Generic.List`1" />의 끝에 추가합니다.</summary>
1392       <param name="collection">요소가 <see cref="T:System.Collections.Generic.List`1" />의 끝에 추가되어야 하는 컬렉션입니다.컬렉션 자체가 null일 수는 없지만 <paramref name="T" /> 형식이 참조 형식인 경우 null인 요소를 포함할 수 있습니다.</param>
1393       <exception cref="T:System.ArgumentNullException">
1394         <paramref name="collection" />가 null인 경우</exception>
1395     </member>
1396     <member name="M:System.Collections.Generic.List`1.AsReadOnly">
1397       <summary>현재 컬렉션에 대한 읽기 전용 <see cref="T:System.Collections.Generic.IList`1" /> 래퍼를 반환합니다.</summary>
1398       <returns>현재 <see cref="T:System.Collections.Generic.List`1" />에 대한 읽기 전용 래퍼 역할을 하는 <see cref="T:System.Collections.ObjectModel.ReadOnlyCollection`1" />입니다.</returns>
1399     </member>
1400     <member name="M:System.Collections.Generic.List`1.BinarySearch(System.Int32,System.Int32,`0,System.Collections.Generic.IComparer{`0})">
1401       <summary>지정된 비교자를 사용하여 정렬된 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 요소를 검색하고 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1402       <returns>
1403         <paramref name="item" />이 있으면 정렬된 <see cref="T:System.Collections.Generic.List`1" />에 있는 <paramref name="item" />의 인덱스(0부터 시작)이고, 그렇지 않으면 <paramref name="item" />보다 큰 다음 요소의 인덱스에 대한 비트 보수인 음수이거나 더 큰 요소가 없는 경우 <see cref="P:System.Collections.Generic.List`1.Count" />의 비트 보수입니다.</returns>
1404       <param name="index">검색할 범위의 0부터 시작하는 인덱스입니다.</param>
1405       <param name="count">검색할 범위의 길이입니다.</param>
1406       <param name="item">찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1407       <param name="comparer">요소를 비교할 때 사용할 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현이거나, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />를 사용하려면 null입니다.</param>
1408       <exception cref="T:System.ArgumentOutOfRangeException">
1409         <paramref name="index" />가 0보다 작습니다.또는<paramref name="count" />가 0보다 작습니다. </exception>
1410       <exception cref="T:System.ArgumentException">
1411         <paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />의 올바른 범위를 나타내지 않는 경우</exception>
1412       <exception cref="T:System.InvalidOperationException">
1413         <paramref name="comparer" />가 null이고, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스의 구현이나 <paramref name="T" /> 형식의 <see cref="T:System.IComparable" /> 인터페이스를 찾지 못한 경우</exception>
1414     </member>
1415     <member name="M:System.Collections.Generic.List`1.BinarySearch(`0)">
1416       <summary>기본 비교자를 사용하여 정렬된 전체 <see cref="T:System.Collections.Generic.List`1" />에서 요소를 검색하고 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1417       <returns>
1418         <paramref name="item" />이 있으면 정렬된 <see cref="T:System.Collections.Generic.List`1" />에 있는 <paramref name="item" />의 인덱스(0부터 시작)이고, 그렇지 않으면 <paramref name="item" />보다 큰 다음 요소의 인덱스에 대한 비트 보수인 음수이거나 더 큰 요소가 없는 경우 <see cref="P:System.Collections.Generic.List`1.Count" />의 비트 보수입니다.</returns>
1419       <param name="item">찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1420       <exception cref="T:System.InvalidOperationException">기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스의 구현이나 <paramref name="T" /> 형식의 <see cref="T:System.IComparable" /> 인터페이스를 찾지 못한 경우</exception>
1421     </member>
1422     <member name="M:System.Collections.Generic.List`1.BinarySearch(`0,System.Collections.Generic.IComparer{`0})">
1423       <summary>지정된 비교자를 사용하여 정렬된 전체 <see cref="T:System.Collections.Generic.List`1" />에서 요소를 검색하고 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1424       <returns>
1425         <paramref name="item" />이 있으면 정렬된 <see cref="T:System.Collections.Generic.List`1" />에 있는 <paramref name="item" />의 인덱스(0부터 시작)이고, 그렇지 않으면 <paramref name="item" />보다 큰 다음 요소의 인덱스에 대한 비트 보수인 음수이거나 더 큰 요소가 없는 경우 <see cref="P:System.Collections.Generic.List`1.Count" />의 비트 보수입니다.</returns>
1426       <param name="item">찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1427       <param name="comparer">요소를 비교할 때 사용하는 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현입니다.또는기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />를 사용하려면 null입니다.</param>
1428       <exception cref="T:System.InvalidOperationException">
1429         <paramref name="comparer" />가 null이고, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스의 구현이나 <paramref name="T" /> 형식의 <see cref="T:System.IComparable" /> 인터페이스를 찾지 못한 경우</exception>
1430     </member>
1431     <member name="P:System.Collections.Generic.List`1.Capacity">
1432       <summary>크기를 조정하지 않고 내부 데이터 구조가 보유할 수 있는 전체 요소 수를 가져오거나 설정합니다.</summary>
1433       <returns>크기를 조정하지 않고 <see cref="T:System.Collections.Generic.List`1" />에 포함될 수 있는 요소 수입니다.</returns>
1434       <exception cref="T:System.ArgumentOutOfRangeException">
1435         <see cref="P:System.Collections.Generic.List`1.Capacity" />가 <see cref="P:System.Collections.Generic.List`1.Count" />보다 작은 값으로 설정된 경우 </exception>
1436       <exception cref="T:System.OutOfMemoryException">시스템에 사용 가능한 메모리가 부족합니다.</exception>
1437     </member>
1438     <member name="M:System.Collections.Generic.List`1.Clear">
1439       <summary>
1440         <see cref="T:System.Collections.Generic.List`1" />에서 요소를 모두 제거합니다.</summary>
1441     </member>
1442     <member name="M:System.Collections.Generic.List`1.Contains(`0)">
1443       <summary>요소가 <see cref="T:System.Collections.Generic.List`1" />에 있는지 여부를 확인합니다.</summary>
1444       <returns>true if <paramref name="item" /> is found in the <see cref="T:System.Collections.Generic.List`1" />; otherwise, false.</returns>
1445       <param name="item">
1446         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1447     </member>
1448     <member name="M:System.Collections.Generic.List`1.CopyTo(System.Int32,`0[],System.Int32,System.Int32)">
1449       <summary>대상 배열의 지정된 인덱스에서 시작하여 <see cref="T:System.Collections.Generic.List`1" />에 있는 일련의 요소를 호환되는 1차원 배열에 복사합니다.</summary>
1450       <param name="index">소스 <see cref="T:System.Collections.Generic.List`1" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
1451       <param name="array">The one-dimensional <see cref="T:System.Array" /> that is the destination of the elements copied from <see cref="T:System.Collections.Generic.List`1" />.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1452       <param name="arrayIndex">
1453         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
1454       <param name="count">복사할 요소의 수입니다.</param>
1455       <exception cref="T:System.ArgumentNullException">
1456         <paramref name="array" />가 null인 경우 </exception>
1457       <exception cref="T:System.ArgumentOutOfRangeException">
1458         <paramref name="index" />가 0보다 작습니다.또는<paramref name="arrayIndex" />가 0보다 작습니다.또는<paramref name="count" />가 0보다 작습니다. </exception>
1459       <exception cref="T:System.ArgumentException">
1460         <paramref name="index" />가 소스 <see cref="T:System.Collections.Generic.List`1" />의 <see cref="P:System.Collections.Generic.List`1.Count" />보다 크거나 같은 경우또는<paramref name="index" />부터 소스 <see cref="T:System.Collections.Generic.List`1" /> 끝까지의 요소 수가 <paramref name="arrayIndex" />부터 대상 <paramref name="array" /> 끝까지의 사용 가능한 공간보다 큰 경우 </exception>
1461     </member>
1462     <member name="M:System.Collections.Generic.List`1.CopyTo(`0[])">
1463       <summary>대상 배열의 처음부터 시작하여 전체 <see cref="T:System.Collections.Generic.List`1" />을 호환되는 1차원 배열에 복사합니다.</summary>
1464       <param name="array">The one-dimensional <see cref="T:System.Array" /> that is the destination of the elements copied from <see cref="T:System.Collections.Generic.List`1" />.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1465       <exception cref="T:System.ArgumentNullException">
1466         <paramref name="array" />가 null인 경우</exception>
1467       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.List`1" />의 요소의 수가 대상 <paramref name="array" />가 포함할 수 있는 요소의 수보다 큰 경우</exception>
1468     </member>
1469     <member name="M:System.Collections.Generic.List`1.CopyTo(`0[],System.Int32)">
1470       <summary>대상 배열의 지정된 인덱스에서 시작하여 전체 <see cref="T:System.Collections.Generic.List`1" />을 호환되는 1차원 배열에 복사합니다.</summary>
1471       <param name="array">The one-dimensional <see cref="T:System.Array" /> that is the destination of the elements copied from <see cref="T:System.Collections.Generic.List`1" />.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1472       <param name="arrayIndex">
1473         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
1474       <exception cref="T:System.ArgumentNullException">
1475         <paramref name="array" />가 null인 경우</exception>
1476       <exception cref="T:System.ArgumentOutOfRangeException">
1477         <paramref name="arrayIndex" />가 0보다 작습니다.</exception>
1478       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.List`1" />의 요소 수가 <paramref name="arrayIndex" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
1479     </member>
1480     <member name="P:System.Collections.Generic.List`1.Count">
1481       <summary>
1482         <see cref="T:System.Collections.Generic.List`1" />에 포함된 요소 수를 가져옵니다.</summary>
1483       <returns>
1484         <see cref="T:System.Collections.Generic.List`1" />에 포함된 요소 수입니다.</returns>
1485     </member>
1486     <member name="M:System.Collections.Generic.List`1.Exists(System.Predicate{`0})">
1487       <summary>지정된 조건자에 정의된 조건과 일치하는 요소가 <see cref="T:System.Collections.Generic.List`1" />에 포함되어 있는지 여부를 확인합니다.</summary>
1488       <returns>지정된 조건자에 정의된 조건과 일치하는 요소가 하나 이상 <see cref="T:System.Collections.Generic.List`1" />에 포함되어 있으면 true이고, 그렇지 않으면 false입니다.</returns>
1489       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1490       <exception cref="T:System.ArgumentNullException">
1491         <paramref name="match" />가 null인 경우</exception>
1492     </member>
1493     <member name="M:System.Collections.Generic.List`1.Find(System.Predicate{`0})">
1494       <summary>지정된 조건자에 정의된 조건과 일치하는 요소를 검색하고 전체 <see cref="T:System.Collections.Generic.List`1" />에서 처음으로 검색한 요소를 반환합니다.</summary>
1495       <returns>지정한 조건자에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 첫 번째 요소이고, 그렇지 않으면 <paramref name="T" /> 형식의 기본값입니다.</returns>
1496       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1497       <exception cref="T:System.ArgumentNullException">
1498         <paramref name="match" />가 null인 경우</exception>
1499     </member>
1500     <member name="M:System.Collections.Generic.List`1.FindAll(System.Predicate{`0})">
1501       <summary>지정한 조건자에 정의된 조건과 일치하는 모든 요소를 검색합니다.</summary>
1502       <returns>지정된 조건자에 정의된 조건과 일치하는 요소가 있으면 해당 요소를 모두 포함하는 <see cref="T:System.Collections.Generic.List`1" />이고, 그렇지 않으면 빈 <see cref="T:System.Collections.Generic.List`1" />입니다.</returns>
1503       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1504       <exception cref="T:System.ArgumentNullException">
1505         <paramref name="match" />가 null인 경우</exception>
1506     </member>
1507     <member name="M:System.Collections.Generic.List`1.FindIndex(System.Int32,System.Int32,System.Predicate{`0})">
1508       <summary>지정한 조건자에 정의된 조건과 일치하는 요소를 검색하여 지정한 인덱스부터 시작하여 지정한 수의 요소를 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 일치하는 요소 중 첫 번째 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1509       <returns>
1510         <paramref name="match" />에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 첫 번째 요소의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1511       <param name="startIndex">검색의 0부터 시작하는 인덱스입니다.</param>
1512       <param name="count">검색할 섹션에 있는 요소 수입니다.</param>
1513       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1514       <exception cref="T:System.ArgumentNullException">
1515         <paramref name="match" />가 null인 경우</exception>
1516       <exception cref="T:System.ArgumentOutOfRangeException">
1517         <paramref name="startIndex" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우또는<paramref name="count" />가 0보다 작습니다.또는<paramref name="startIndex" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에서 올바른 섹션을 나타내지 않는 경우</exception>
1518     </member>
1519     <member name="M:System.Collections.Generic.List`1.FindIndex(System.Int32,System.Predicate{`0})">
1520       <summary>지정한 조건자에 정의된 조건과 일치하는 요소를 검색하여 지정한 인덱스에서 마지막 요소로 확장하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 일치하는 요소 중 첫 번째 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1521       <returns>
1522         <paramref name="match" />에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 첫 번째 요소의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1523       <param name="startIndex">검색의 0부터 시작하는 인덱스입니다.</param>
1524       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1525       <exception cref="T:System.ArgumentNullException">
1526         <paramref name="match" />가 null인 경우</exception>
1527       <exception cref="T:System.ArgumentOutOfRangeException">
1528         <paramref name="startIndex" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우</exception>
1529     </member>
1530     <member name="M:System.Collections.Generic.List`1.FindIndex(System.Predicate{`0})">
1531       <summary>지정한 조건자에 정의된 조건과 일치하는 요소를 검색하여 전체 <see cref="T:System.Collections.Generic.List`1" />에서 일치하는 요소 중 첫 번째 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1532       <returns>
1533         <paramref name="match" />에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 첫 번째 요소의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1534       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1535       <exception cref="T:System.ArgumentNullException">
1536         <paramref name="match" />가 null인 경우</exception>
1537     </member>
1538     <member name="M:System.Collections.Generic.List`1.FindLast(System.Predicate{`0})">
1539       <summary>지정된 조건자에 정의된 조건과 일치하는 요소를 검색하고 전체 <see cref="T:System.Collections.Generic.List`1" />에서 마지막으로 검색한 요소를 반환합니다.</summary>
1540       <returns>지정한 조건자에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 마지막 요소이고, 그렇지 않으면 <paramref name="T" /> 형식의 기본값입니다.</returns>
1541       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1542       <exception cref="T:System.ArgumentNullException">
1543         <paramref name="match" />가 null인 경우</exception>
1544     </member>
1545     <member name="M:System.Collections.Generic.List`1.FindLastIndex(System.Int32,System.Int32,System.Predicate{`0})">
1546       <summary>지정한 조건자에 정의된 조건과 일치하는 요소를 검색하여 지정한 수의 요소가 들어 있고 지정한 인덱스에서 끝나는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 일치하는 요소 중 마지막 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1547       <returns>
1548         <paramref name="match" />에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 마지막 요소의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1549       <param name="startIndex">역방향 검색의 0부터 시작하는 인덱스입니다.</param>
1550       <param name="count">검색할 섹션에 있는 요소 수입니다.</param>
1551       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1552       <exception cref="T:System.ArgumentNullException">
1553         <paramref name="match" />가 null인 경우</exception>
1554       <exception cref="T:System.ArgumentOutOfRangeException">
1555         <paramref name="startIndex" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우또는<paramref name="count" />가 0보다 작습니다.또는<paramref name="startIndex" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에서 올바른 섹션을 나타내지 않는 경우</exception>
1556     </member>
1557     <member name="M:System.Collections.Generic.List`1.FindLastIndex(System.Int32,System.Predicate{`0})">
1558       <summary>지정한 조건자에 정의된 조건과 일치하는 요소를 검색하여 첫 번째 요소에서 지정한 인덱스로 확장하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 일치하는 요소 중 마지막 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1559       <returns>
1560         <paramref name="match" />에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 마지막 요소의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1561       <param name="startIndex">역방향 검색의 0부터 시작하는 인덱스입니다.</param>
1562       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1563       <exception cref="T:System.ArgumentNullException">
1564         <paramref name="match" />가 null인 경우</exception>
1565       <exception cref="T:System.ArgumentOutOfRangeException">
1566         <paramref name="startIndex" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우</exception>
1567     </member>
1568     <member name="M:System.Collections.Generic.List`1.FindLastIndex(System.Predicate{`0})">
1569       <summary>지정한 조건자에 정의된 조건과 일치하는 요소를 검색하여 전체 <see cref="T:System.Collections.Generic.List`1" />에서 일치하는 요소 중 마지막 요소의 인덱스(0부터 시작)를 반환합니다.</summary>
1570       <returns>
1571         <paramref name="match" />에 정의된 조건과 일치하는 요소가 있으면 일치하는 요소 중 마지막 요소의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1572       <param name="match">검색할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1573       <exception cref="T:System.ArgumentNullException">
1574         <paramref name="match" />가 null인 경우</exception>
1575     </member>
1576     <member name="M:System.Collections.Generic.List`1.ForEach(System.Action{`0})">
1577       <summary>
1578         <see cref="T:System.Collections.Generic.List`1" />의 각 요소에 대해 지정된 작업을 수행합니다.</summary>
1579       <param name="action">
1580         <see cref="T:System.Collections.Generic.List`1" />의 각 요소에 대해 수행할 <see cref="T:System.Action`1" /> 대리자입니다.</param>
1581       <exception cref="T:System.ArgumentNullException">
1582         <paramref name="action" />가 null인 경우</exception>
1583     </member>
1584     <member name="M:System.Collections.Generic.List`1.GetEnumerator">
1585       <summary>
1586         <see cref="T:System.Collections.Generic.List`1" />을 반복하는 열거자를 반환합니다.</summary>
1587       <returns>
1588         <see cref="T:System.Collections.Generic.List`1" />에 대한 <see cref="T:System.Collections.Generic.List`1.Enumerator" />입니다.</returns>
1589     </member>
1590     <member name="M:System.Collections.Generic.List`1.GetRange(System.Int32,System.Int32)">
1591       <summary>소스 <see cref="T:System.Collections.Generic.List`1" />에 있는 일련의 요소에 대한 단순 복사본을 만듭니다.</summary>
1592       <returns>소스 <see cref="T:System.Collections.Generic.List`1" />에 있는 일련의 요소에 대한 단순 복사본입니다.</returns>
1593       <param name="index">범위가 시작되는 <see cref="T:System.Collections.Generic.List`1" /> 인덱스(0부터 시작)입니다.</param>
1594       <param name="count">범위의 요소 수입니다.</param>
1595       <exception cref="T:System.ArgumentOutOfRangeException">
1596         <paramref name="index" />가 0보다 작습니다.또는<paramref name="count" />가 0보다 작습니다.</exception>
1597       <exception cref="T:System.ArgumentException">
1598         <paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에 있는 요소의 올바른 범위를 나타내지 않는 경우</exception>
1599     </member>
1600     <member name="M:System.Collections.Generic.List`1.IndexOf(`0)">
1601       <summary>지정된 개체를 검색하고, 전체 <see cref="T:System.Collections.Generic.List`1" />에서 처음으로 검색한 개체의 인덱스(0부터 시작)를 반환합니다.</summary>
1602       <returns>
1603         <paramref name="item" />이 있으면 전체 <see cref="T:System.Collections.Generic.List`1" />에서 맨 처음 발견되는 값의 0부터 시작하는 인덱스이고, 그렇지 않으면 -1입니다.</returns>
1604       <param name="item">
1605         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1606     </member>
1607     <member name="M:System.Collections.Generic.List`1.IndexOf(`0,System.Int32)">
1608       <summary>지정된 개체를 검색하고, 지정된 인덱스부터 마지막 요소까지 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 처음으로 검색한 개체의 인덱스(0부터 시작)를 반환합니다.</summary>
1609       <returns>
1610         <paramref name="index" />부터 마지막 요소까지 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에 <paramref name="item" />이 있으면 처음으로 검색한 개체의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1611       <param name="item">
1612         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1613       <param name="index">검색의 0부터 시작하는 인덱스입니다.0은 빈 목록에서 유효합니다.</param>
1614       <exception cref="T:System.ArgumentOutOfRangeException">
1615         <paramref name="index" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우</exception>
1616     </member>
1617     <member name="M:System.Collections.Generic.List`1.IndexOf(`0,System.Int32,System.Int32)">
1618       <summary>지정된 개체를 검색하고, 지정된 인덱스에서 시작하여 지정된 수의 요소를 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 처음으로 검색한 개체의 인덱스(0부터 시작)를 반환합니다.</summary>
1619       <returns>
1620         <paramref name="index" />에서 시작하여 <paramref name="count" />개의 요소를 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에 <paramref name="item" />이 있으면 처음으로 검색한 개체의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1621       <param name="item">
1622         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1623       <param name="index">검색의 0부터 시작하는 인덱스입니다.0은 빈 목록에서 유효합니다.</param>
1624       <param name="count">검색할 섹션에 있는 요소 수입니다.</param>
1625       <exception cref="T:System.ArgumentOutOfRangeException">
1626         <paramref name="index" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우또는<paramref name="count" />가 0보다 작습니다.또는<paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에서 올바른 섹션을 나타내지 않는 경우</exception>
1627     </member>
1628     <member name="M:System.Collections.Generic.List`1.Insert(System.Int32,`0)">
1629       <summary>
1630         <see cref="T:System.Collections.Generic.List`1" />의 지정된 인덱스에 요소를 삽입합니다.</summary>
1631       <param name="index">
1632         <paramref name="item" />를 삽입해야 하는 인덱스(0부터 시작)입니다.</param>
1633       <param name="item">삽입할 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1634       <exception cref="T:System.ArgumentOutOfRangeException">
1635         <paramref name="index" />가 0보다 작습니다.또는<paramref name="index" />가 <see cref="P:System.Collections.Generic.List`1.Count" />보다 큰 경우</exception>
1636     </member>
1637     <member name="M:System.Collections.Generic.List`1.InsertRange(System.Int32,System.Collections.Generic.IEnumerable{`0})">
1638       <summary>
1639         <see cref="T:System.Collections.Generic.List`1" />의 지정된 인덱스에 컬렉션의 요소를 삽입합니다.</summary>
1640       <param name="index">새 요소가 삽입되어야 하는 0부터 시작하는 인덱스입니다.</param>
1641       <param name="collection">요소가 <see cref="T:System.Collections.Generic.List`1" />에 삽입되어야 하는 컬렉션입니다.컬렉션 자체가 null일 수는 없지만 <paramref name="T" /> 형식이 참조 형식인 경우 null인 요소를 포함할 수 있습니다.</param>
1642       <exception cref="T:System.ArgumentNullException">
1643         <paramref name="collection" />가 null인 경우</exception>
1644       <exception cref="T:System.ArgumentOutOfRangeException">
1645         <paramref name="index" />가 0보다 작습니다.또는<paramref name="index" />가 <see cref="P:System.Collections.Generic.List`1.Count" />보다 큰 경우</exception>
1646     </member>
1647     <member name="P:System.Collections.Generic.List`1.Item(System.Int32)">
1648       <summary>지정한 인덱스에 있는 요소를 가져오거나 설정합니다.</summary>
1649       <returns>지정한 인덱스의 요소입니다.</returns>
1650       <param name="index">가져오거나 설정할 요소의 인덱스(0부터 시작)입니다.</param>
1651       <exception cref="T:System.ArgumentOutOfRangeException">
1652         <paramref name="index" />가 0보다 작습니다.또는<paramref name="index" />가 <see cref="P:System.Collections.Generic.List`1.Count" />보다 크거나 같은 경우 </exception>
1653     </member>
1654     <member name="M:System.Collections.Generic.List`1.LastIndexOf(`0)">
1655       <summary>지정된 개체를 검색하고, 전체 <see cref="T:System.Collections.Generic.List`1" />에서 마지막으로 검색한 개체의 인덱스(0부터 시작)를 반환합니다.</summary>
1656       <returns>전체 <see cref="T:System.Collections.Generic.List`1" />에 <paramref name="item" />이 있으면 마지막으로 검색한 개체의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1657       <param name="item">
1658         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1659     </member>
1660     <member name="M:System.Collections.Generic.List`1.LastIndexOf(`0,System.Int32)">
1661       <summary>지정된 개체를 검색하고, 첫 번째 요소부터 지정된 인덱스까지 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 마지막으로 검색한 개체의 인덱스(0부터 시작)를 반환합니다.</summary>
1662       <returns>첫 번째 요소부터 <paramref name="index" />까지 포함하는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에 <paramref name="item" />이 있으면 마지막으로 검색한 개체의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1663       <param name="item">
1664         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1665       <param name="index">역방향 검색의 0부터 시작하는 인덱스입니다.</param>
1666       <exception cref="T:System.ArgumentOutOfRangeException">
1667         <paramref name="index" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우 </exception>
1668     </member>
1669     <member name="M:System.Collections.Generic.List`1.LastIndexOf(`0,System.Int32,System.Int32)">
1670       <summary>지정된 개체를 검색하며, 지정된 수의 요소를 포함하고 지정된 인덱스에서 끝나는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에서 마지막으로 검색한 개체의 인덱스(0부터 시작)를 반환합니다.</summary>
1671       <returns>
1672         <paramref name="count" />개의 요소를 포함하고 <paramref name="index" />에서 끝나는 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에 <paramref name="item" />이 있으면 마지막으로 검색한 개체의 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
1673       <param name="item">
1674         <see cref="T:System.Collections.Generic.List`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1675       <param name="index">역방향 검색의 0부터 시작하는 인덱스입니다.</param>
1676       <param name="count">검색할 섹션에 있는 요소 수입니다.</param>
1677       <exception cref="T:System.ArgumentOutOfRangeException">
1678         <paramref name="index" />가 <see cref="T:System.Collections.Generic.List`1" />의 유효한 인덱스 범위 밖에 있는 경우또는<paramref name="count" />가 0보다 작습니다.또는<paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에서 올바른 섹션을 나타내지 않는 경우 </exception>
1679     </member>
1680     <member name="M:System.Collections.Generic.List`1.Remove(`0)">
1681       <summary>
1682         <see cref="T:System.Collections.Generic.List`1" />에서 맨 처음 발견되는 특정 개체를 제거합니다.</summary>
1683       <returns>
1684         <paramref name="item" />이 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.This method also returns false if <paramref name="item" /> was not found in the <see cref="T:System.Collections.Generic.List`1" />.</returns>
1685       <param name="item">
1686         <see cref="T:System.Collections.Generic.List`1" />에서 제거할 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1687     </member>
1688     <member name="M:System.Collections.Generic.List`1.RemoveAll(System.Predicate{`0})">
1689       <summary>지정된 조건자에 정의된 조건과 일치하는 요소를 모두 제거합니다.</summary>
1690       <returns>
1691         <see cref="T:System.Collections.Generic.List`1" />에서 제거한 요소의 수입니다.</returns>
1692       <param name="match">제거할 요소의 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1693       <exception cref="T:System.ArgumentNullException">
1694         <paramref name="match" />가 null인 경우</exception>
1695     </member>
1696     <member name="M:System.Collections.Generic.List`1.RemoveAt(System.Int32)">
1697       <summary>
1698         <see cref="T:System.Collections.Generic.List`1" />의 지정한 인덱스에서 요소를 제거합니다.</summary>
1699       <param name="index">제거할 요소의 인덱스(0부터 시작)입니다.</param>
1700       <exception cref="T:System.ArgumentOutOfRangeException">
1701         <paramref name="index" />가 0보다 작습니다.또는<paramref name="index" />가 <see cref="P:System.Collections.Generic.List`1.Count" />보다 크거나 같은 경우</exception>
1702     </member>
1703     <member name="M:System.Collections.Generic.List`1.RemoveRange(System.Int32,System.Int32)">
1704       <summary>
1705         <see cref="T:System.Collections.Generic.List`1" />에서 요소의 범위를 제거합니다.</summary>
1706       <param name="index">제거할 요소의 범위에 대한 0부터 시작하는 인덱스입니다.</param>
1707       <param name="count">제거할 요소의 수입니다.</param>
1708       <exception cref="T:System.ArgumentOutOfRangeException">
1709         <paramref name="index" />가 0보다 작습니다.또는<paramref name="count" />가 0보다 작습니다.</exception>
1710       <exception cref="T:System.ArgumentException">
1711         <paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에 있는 요소의 올바른 범위를 나타내지 않는 경우</exception>
1712     </member>
1713     <member name="M:System.Collections.Generic.List`1.Reverse">
1714       <summary>전체 <see cref="T:System.Collections.Generic.List`1" />에서 요소의 순서를 반대로 바꿉니다.</summary>
1715     </member>
1716     <member name="M:System.Collections.Generic.List`1.Reverse(System.Int32,System.Int32)">
1717       <summary>지정된 범위에서 요소의 순서를 반대로 바꿉니다.</summary>
1718       <param name="index">순서를 반대로 바꿀 범위의 0부터 시작하는 인덱스입니다.</param>
1719       <param name="count">순서를 반대로 바꿀 범위의 요소 수입니다.</param>
1720       <exception cref="T:System.ArgumentOutOfRangeException">
1721         <paramref name="index" />가 0보다 작습니다.또는<paramref name="count" />가 0보다 작습니다. </exception>
1722       <exception cref="T:System.ArgumentException">
1723         <paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에 있는 요소의 올바른 범위를 나타내지 않는 경우 </exception>
1724     </member>
1725     <member name="M:System.Collections.Generic.List`1.Sort">
1726       <summary>기본 비교자를 사용하여 전체 <see cref="T:System.Collections.Generic.List`1" />의 요소를 정렬합니다.</summary>
1727       <exception cref="T:System.InvalidOperationException">기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스의 구현이나 <paramref name="T" /> 형식의 <see cref="T:System.IComparable" /> 인터페이스를 찾지 못한 경우</exception>
1728     </member>
1729     <member name="M:System.Collections.Generic.List`1.Sort(System.Collections.Generic.IComparer{`0})">
1730       <summary>지정된 비교자를 사용하여 전체 <see cref="T:System.Collections.Generic.List`1" />에 있는 요소를 정렬합니다.</summary>
1731       <param name="comparer">요소를 비교할 때 사용할 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현이거나, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />를 사용하려면 null입니다.</param>
1732       <exception cref="T:System.InvalidOperationException">
1733         <paramref name="comparer" />가 null이고, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스의 구현이나 <paramref name="T" /> 형식의 <see cref="T:System.IComparable" /> 인터페이스를 찾지 못한 경우</exception>
1734       <exception cref="T:System.ArgumentException">정렬하는 동안<paramref name="comparer" /> 구현에서 오류가 발생한 경우예를 들어, <paramref name="comparer" />는 항목을 항목 자체와 비교할 때 0을 반환하지 않을 수 있습니다.</exception>
1735     </member>
1736     <member name="M:System.Collections.Generic.List`1.Sort(System.Comparison{`0})">
1737       <summary>지정된 <see cref="T:System.Comparison`1" />을 사용하여 전체 <see cref="T:System.Collections.Generic.List`1" />의 요소를 정렬합니다.</summary>
1738       <param name="comparison">요소를 비교할 때 사용할 <see cref="T:System.Comparison`1" />입니다.</param>
1739       <exception cref="T:System.ArgumentNullException">
1740         <paramref name="comparison" />가 null인 경우</exception>
1741       <exception cref="T:System.ArgumentException">정렬하는 동안<paramref name="comparison" /> 구현에서 오류가 발생한 경우예를 들어, <paramref name="comparison" />는 항목을 항목 자체와 비교할 때 0을 반환하지 않을 수 있습니다.</exception>
1742     </member>
1743     <member name="M:System.Collections.Generic.List`1.Sort(System.Int32,System.Int32,System.Collections.Generic.IComparer{`0})">
1744       <summary>지정된 비교자를 사용하여 <see cref="T:System.Collections.Generic.List`1" />의 요소 범위에 있는 요소를 정렬합니다.</summary>
1745       <param name="index">정렬할 범위의 0부터 시작하는 인덱스입니다.</param>
1746       <param name="count">정렬할 범위의 길이입니다.</param>
1747       <param name="comparer">요소를 비교할 때 사용할 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현이거나, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />를 사용하려면 null입니다.</param>
1748       <exception cref="T:System.ArgumentOutOfRangeException">
1749         <paramref name="index" />가 0보다 작습니다.또는<paramref name="count" />가 0보다 작습니다.</exception>
1750       <exception cref="T:System.ArgumentException">
1751         <paramref name="index" /> 및 <paramref name="count" />가 <see cref="T:System.Collections.Generic.List`1" />에서 올바른 범위를 나타내지 않는 경우또는정렬하는 동안<paramref name="comparer" /> 구현에서 오류가 발생한 경우예를 들어, <paramref name="comparer" />는 항목을 항목 자체와 비교할 때 0을 반환하지 않을 수 있습니다.</exception>
1752       <exception cref="T:System.InvalidOperationException">
1753         <paramref name="comparer" />가 null이고, 기본 비교자 <see cref="P:System.Collections.Generic.Comparer`1.Default" />가 <see cref="T:System.IComparable`1" /> 제네릭 인터페이스의 구현이나 <paramref name="T" /> 형식의 <see cref="T:System.IComparable" /> 인터페이스를 찾지 못한 경우</exception>
1754     </member>
1755     <member name="P:System.Collections.Generic.List`1.System#Collections#Generic#ICollection{T}#IsReadOnly">
1756       <summary>
1757         <see cref="T:System.Collections.Generic.ICollection`1" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
1758       <returns>true if the <see cref="T:System.Collections.Generic.ICollection`1" /> is read-only; otherwise, false.<see cref="T:System.Collections.Generic.List`1" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
1759     </member>
1760     <member name="M:System.Collections.Generic.List`1.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
1761       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
1762       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
1763     </member>
1764     <member name="M:System.Collections.Generic.List`1.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
1765       <summary>특정 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
1766       <param name="array">The one-dimensional <see cref="T:System.Array" /> that is the destination of the elements copied from <see cref="T:System.Collections.ICollection" />.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1767       <param name="arrayIndex">
1768         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
1769       <exception cref="T:System.ArgumentNullException">
1770         <paramref name="array" />가 null인 경우</exception>
1771       <exception cref="T:System.ArgumentOutOfRangeException">
1772         <paramref name="arrayIndex" />가 0보다 작습니다.</exception>
1773       <exception cref="T:System.ArgumentException">
1774         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="arrayIndex" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
1775     </member>
1776     <member name="P:System.Collections.Generic.List`1.System#Collections#ICollection#IsSynchronized">
1777       <summary>
1778         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
1779       <returns>true if access to the <see cref="T:System.Collections.ICollection" /> is synchronized (thread safe); otherwise, false.<see cref="T:System.Collections.Generic.List`1" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
1780     </member>
1781     <member name="P:System.Collections.Generic.List`1.System#Collections#ICollection#SyncRoot">
1782       <summary>
1783         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
1784       <returns>
1785         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.<see cref="T:System.Collections.Generic.List`1" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
1786     </member>
1787     <member name="M:System.Collections.Generic.List`1.System#Collections#IEnumerable#GetEnumerator">
1788       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
1789       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
1790     </member>
1791     <member name="M:System.Collections.Generic.List`1.System#Collections#IList#Add(System.Object)">
1792       <summary>
1793         <see cref="T:System.Collections.IList" />에 항목을 추가합니다.</summary>
1794       <returns>새 요소가 삽입된 위치입니다.</returns>
1795       <param name="item">
1796         <see cref="T:System.Collections.IList" />에 추가할 <see cref="T:System.Object" />입니다.</param>
1797       <exception cref="T:System.ArgumentException">
1798         <paramref name="item" />의 형식은 <see cref="T:System.Collections.IList" />에 할당할 수 없습니다.</exception>
1799     </member>
1800     <member name="M:System.Collections.Generic.List`1.System#Collections#IList#Contains(System.Object)">
1801       <summary>
1802         <see cref="T:System.Collections.IList" />에 특정 값이 들어 있는지 여부를 확인합니다.</summary>
1803       <returns>true if <paramref name="item" /> is found in the <see cref="T:System.Collections.IList" />; otherwise, false.</returns>
1804       <param name="item">
1805         <see cref="T:System.Collections.IList" />에서 찾을 <see cref="T:System.Object" />입니다.</param>
1806     </member>
1807     <member name="M:System.Collections.Generic.List`1.System#Collections#IList#IndexOf(System.Object)">
1808       <summary>
1809         <see cref="T:System.Collections.IList" />에서 특정 항목의 인덱스를 확인합니다.</summary>
1810       <returns>목록에 있으면 <paramref name="item" />의 인덱스이고, 그렇지 않으면 -1입니다.</returns>
1811       <param name="item">
1812         <see cref="T:System.Collections.IList" />에서 찾을 개체입니다.</param>
1813       <exception cref="T:System.ArgumentException">
1814         <paramref name="item" />의 형식은 <see cref="T:System.Collections.IList" />에 할당할 수 없습니다.</exception>
1815     </member>
1816     <member name="M:System.Collections.Generic.List`1.System#Collections#IList#Insert(System.Int32,System.Object)">
1817       <summary>항목을 <see cref="T:System.Collections.IList" />의 지정된 인덱스에 삽입합니다.</summary>
1818       <param name="index">
1819         <paramref name="item" />를 삽입해야 하는 인덱스(0부터 시작)입니다.</param>
1820       <param name="item">
1821         <see cref="T:System.Collections.IList" />에 삽입할 개체입니다.</param>
1822       <exception cref="T:System.ArgumentOutOfRangeException">
1823         <paramref name="index" />가 <see cref="T:System.Collections.IList" />의 유효한 인덱스가 아닌 경우 </exception>
1824       <exception cref="T:System.ArgumentException">
1825         <paramref name="item" />의 형식은 <see cref="T:System.Collections.IList" />에 할당할 수 없습니다.</exception>
1826     </member>
1827     <member name="P:System.Collections.Generic.List`1.System#Collections#IList#IsFixedSize">
1828       <summary>
1829         <see cref="T:System.Collections.IList" />의 크기가 고정되어 있는지 여부를 나타내는 값을 가져옵니다.</summary>
1830       <returns>
1831         <see cref="T:System.Collections.IList" />의 크기가 고정되어 있으면 true이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.List`1" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
1832     </member>
1833     <member name="P:System.Collections.Generic.List`1.System#Collections#IList#IsReadOnly">
1834       <summary>
1835         <see cref="T:System.Collections.IList" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
1836       <returns>true if the <see cref="T:System.Collections.IList" /> is read-only; otherwise, false.<see cref="T:System.Collections.Generic.List`1" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
1837     </member>
1838     <member name="P:System.Collections.Generic.List`1.System#Collections#IList#Item(System.Int32)">
1839       <summary>지정한 인덱스에 있는 요소를 가져오거나 설정합니다.</summary>
1840       <returns>지정한 인덱스의 요소입니다.</returns>
1841       <param name="index">가져오거나 설정할 요소의 인덱스(0부터 시작)입니다.</param>
1842       <exception cref="T:System.ArgumentOutOfRangeException">
1843         <paramref name="index" />가 <see cref="T:System.Collections.IList" />의 유효한 인덱스가 아닌 경우</exception>
1844       <exception cref="T:System.ArgumentException">속성이 설정되어 있고 <paramref name="value" />의 형식을 <see cref="T:System.Collections.IList" />에 할당할 수 없는 경우</exception>
1845     </member>
1846     <member name="M:System.Collections.Generic.List`1.System#Collections#IList#Remove(System.Object)">
1847       <summary>
1848         <see cref="T:System.Collections.IList" />에서 맨 처음 발견되는 특정 개체를 제거합니다.</summary>
1849       <param name="item">
1850         <see cref="T:System.Collections.IList" />에서 제거할 개체입니다.</param>
1851       <exception cref="T:System.ArgumentException">
1852         <paramref name="item" />의 형식은 <see cref="T:System.Collections.IList" />에 할당할 수 없습니다.</exception>
1853     </member>
1854     <member name="M:System.Collections.Generic.List`1.ToArray">
1855       <summary>
1856         <see cref="T:System.Collections.Generic.List`1" />의 요소를 새 배열에 복사합니다.</summary>
1857       <returns>
1858         <see cref="T:System.Collections.Generic.List`1" />의 요소 복사본을 포함하는 배열입니다.</returns>
1859     </member>
1860     <member name="M:System.Collections.Generic.List`1.TrimExcess">
1861       <summary>
1862         <see cref="T:System.Collections.Generic.List`1" />에 있는 요소의 실제 수가 임계값보다 작은 경우 용량을 요소 수로 설정합니다.</summary>
1863     </member>
1864     <member name="M:System.Collections.Generic.List`1.TrueForAll(System.Predicate{`0})">
1865       <summary>
1866         <see cref="T:System.Collections.Generic.List`1" />의 모든 요소가 지정된 조건자에 정의된 조건과 일치하는지 여부를 확인합니다.</summary>
1867       <returns>
1868         <see cref="T:System.Collections.Generic.List`1" />의 모든 요소가 지정된 조건자에 정의된 조건과 일치하면 true이고, 그렇지 않으면 false입니다.목록에 요소가 없으면 반환 값은 true입니다.</returns>
1869       <param name="match">요소에 대해 확인할 조건을 정의하는 <see cref="T:System.Predicate`1" /> 대리자입니다.</param>
1870       <exception cref="T:System.ArgumentNullException">
1871         <paramref name="match" />가 null인 경우</exception>
1872     </member>
1873     <member name="T:System.Collections.Generic.List`1.Enumerator">
1874       <summary>
1875         <see cref="T:System.Collections.Generic.List`1" />의 요소를 열거합니다.</summary>
1876     </member>
1877     <member name="P:System.Collections.Generic.List`1.Enumerator.Current">
1878       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
1879       <returns>
1880         <see cref="T:System.Collections.Generic.List`1" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
1881     </member>
1882     <member name="M:System.Collections.Generic.List`1.Enumerator.Dispose">
1883       <summary>
1884         <see cref="T:System.Collections.Generic.List`1.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
1885     </member>
1886     <member name="M:System.Collections.Generic.List`1.Enumerator.MoveNext">
1887       <summary>열거자를 <see cref="T:System.Collections.Generic.List`1" />의 다음 요소로 이동합니다.</summary>
1888       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
1889       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
1890     </member>
1891     <member name="P:System.Collections.Generic.List`1.Enumerator.System#Collections#IEnumerator#Current">
1892       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
1893       <returns>
1894         <see cref="T:System.Collections.Generic.List`1" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
1895       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
1896     </member>
1897     <member name="M:System.Collections.Generic.List`1.Enumerator.System#Collections#IEnumerator#Reset">
1898       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
1899       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
1900     </member>
1901     <member name="T:System.Collections.Generic.Queue`1">
1902       <summary>개체의 선입선출(FIFO) 컬렉션을 나타냅니다.</summary>
1903       <typeparam name="T">큐에 있는 요소의 형식을 지정합니다.</typeparam>
1904       <filterpriority>1</filterpriority>
1905     </member>
1906     <member name="M:System.Collections.Generic.Queue`1.#ctor">
1907       <summary>비어 있는 상태에서 기본 초기 용량을 가지는 <see cref="T:System.Collections.Generic.Queue`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1908     </member>
1909     <member name="M:System.Collections.Generic.Queue`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
1910       <summary>지정된 컬렉션에서 복사한 요소를 포함하고 복사한 요소를 모두 수용할 수 있을 정도의 용량을 가진 <see cref="T:System.Collections.Generic.Queue`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1911       <param name="collection">해당 요소가 새 <see cref="T:System.Collections.Generic.Queue`1" />에 복사되는 컬렉션입니다.</param>
1912       <exception cref="T:System.ArgumentNullException">
1913         <paramref name="collection" /> is null.</exception>
1914     </member>
1915     <member name="M:System.Collections.Generic.Queue`1.#ctor(System.Int32)">
1916       <summary>비어 있는 상태에서 지정한 초기 용량을 가지는 <see cref="T:System.Collections.Generic.Queue`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
1917       <param name="capacity">
1918         <see cref="T:System.Collections.Generic.Queue`1" />에 포함될 수 있는 초기 요소의 수입니다.</param>
1919       <exception cref="T:System.ArgumentOutOfRangeException">
1920         <paramref name="capacity" /> is less than zero.</exception>
1921     </member>
1922     <member name="M:System.Collections.Generic.Queue`1.Clear">
1923       <summary>
1924         <see cref="T:System.Collections.Generic.Queue`1" />에서 개체를 모두 제거합니다.</summary>
1925       <filterpriority>1</filterpriority>
1926     </member>
1927     <member name="M:System.Collections.Generic.Queue`1.Contains(`0)">
1928       <summary>요소가 <see cref="T:System.Collections.Generic.Queue`1" />에 있는지를 확인합니다.</summary>
1929       <returns>
1930         <paramref name="item" />이 <see cref="T:System.Collections.Generic.Queue`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
1931       <param name="item">
1932         <see cref="T:System.Collections.Generic.Queue`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1933     </member>
1934     <member name="M:System.Collections.Generic.Queue`1.CopyTo(`0[],System.Int32)">
1935       <summary>
1936         <see cref="T:System.Collections.Generic.Queue`1" /> 요소를 지정한 배열 인덱스에서 시작하여 기존의 1차원 <see cref="T:System.Array" />에 복사합니다.</summary>
1937       <param name="array">
1938         <see cref="T:System.Collections.Generic.Queue`1" />에서 복사한 요소의 대상인 1차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1939       <param name="arrayIndex">
1940         <paramref name="array" />에서 복사가 시작되는 0부터 시작하는 인덱스입니다.</param>
1941       <exception cref="T:System.ArgumentNullException">
1942         <paramref name="array" /> is null.</exception>
1943       <exception cref="T:System.ArgumentOutOfRangeException">
1944         <paramref name="arrayIndex" /> is less than zero.</exception>
1945       <exception cref="T:System.ArgumentException">The number of elements in the source <see cref="T:System.Collections.Generic.Queue`1" /> is greater than the available space from <paramref name="arrayIndex" /> to the end of the destination <paramref name="array" />.</exception>
1946     </member>
1947     <member name="P:System.Collections.Generic.Queue`1.Count">
1948       <summary>
1949         <see cref="T:System.Collections.Generic.Queue`1" />에 포함된 요소의 수를 가져옵니다.</summary>
1950       <returns>
1951         <see cref="T:System.Collections.Generic.Queue`1" />에 포함된 요소의 수입니다.</returns>
1952     </member>
1953     <member name="M:System.Collections.Generic.Queue`1.Dequeue">
1954       <summary>
1955         <see cref="T:System.Collections.Generic.Queue`1" />의 시작 부분에서 개체를 제거하고 반환합니다.</summary>
1956       <returns>
1957         <see cref="T:System.Collections.Generic.Queue`1" />의 시작에서 제거하는 개체입니다.</returns>
1958       <exception cref="T:System.InvalidOperationException">The <see cref="T:System.Collections.Generic.Queue`1" /> is empty.</exception>
1959     </member>
1960     <member name="M:System.Collections.Generic.Queue`1.Enqueue(`0)">
1961       <summary>개체를 <see cref="T:System.Collections.Generic.Queue`1" />의 끝 부분에 추가합니다.</summary>
1962       <param name="item">
1963         <see cref="T:System.Collections.Generic.Queue`1" />에 추가할 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
1964     </member>
1965     <member name="M:System.Collections.Generic.Queue`1.GetEnumerator">
1966       <summary>
1967         <see cref="T:System.Collections.Generic.Queue`1" />을 반복하는 열거자를 반환합니다.</summary>
1968       <returns>
1969         <see cref="T:System.Collections.Generic.Queue`1" />에 대한 <see cref="T:System.Collections.Generic.Queue`1.Enumerator" />입니다.</returns>
1970     </member>
1971     <member name="M:System.Collections.Generic.Queue`1.Peek">
1972       <summary>
1973         <see cref="T:System.Collections.Generic.Queue`1" />의 시작 부분에서 개체를 제거하지 않고 반환합니다.</summary>
1974       <returns>
1975         <see cref="T:System.Collections.Generic.Queue`1" />의 처음에 있는 개체입니다.</returns>
1976       <exception cref="T:System.InvalidOperationException">The <see cref="T:System.Collections.Generic.Queue`1" /> is empty.</exception>
1977     </member>
1978     <member name="M:System.Collections.Generic.Queue`1.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
1979       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
1980       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
1981     </member>
1982     <member name="M:System.Collections.Generic.Queue`1.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
1983       <summary>특정 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
1984       <param name="array">
1985         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 1차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
1986       <param name="index">
1987         <paramref name="array" />에서 복사가 시작되는 0부터 시작하는 인덱스입니다.</param>
1988       <exception cref="T:System.ArgumentNullException">
1989         <paramref name="array" /> is null.</exception>
1990       <exception cref="T:System.ArgumentOutOfRangeException">
1991         <paramref name="index" /> is less than zero.</exception>
1992       <exception cref="T:System.ArgumentException">
1993         <paramref name="array" /> is multidimensional.-or-<paramref name="array" /> does not have zero-based indexing.-or-The number of elements in the source <see cref="T:System.Collections.ICollection" /> is greater than the available space from <paramref name="index" /> to the end of the destination <paramref name="array" />.-or-The type of the source <see cref="T:System.Collections.ICollection" /> cannot be cast automatically to the type of the destination <paramref name="array" />.</exception>
1994     </member>
1995     <member name="P:System.Collections.Generic.Queue`1.System#Collections#ICollection#IsSynchronized">
1996       <summary>
1997         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지를 나타내는 값을 가져옵니다.</summary>
1998       <returns>
1999         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.Queue`1" />의 기본 구현에서 이 속성은 항상 false를 반환합니다.</returns>
2000     </member>
2001     <member name="P:System.Collections.Generic.Queue`1.System#Collections#ICollection#SyncRoot">
2002       <summary>
2003         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
2004       <returns>
2005         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.<see cref="T:System.Collections.Generic.Queue`1" />의 기본 구현에서 이 속성은 항상 현재 인스턴스를 반환합니다.</returns>
2006     </member>
2007     <member name="M:System.Collections.Generic.Queue`1.System#Collections#IEnumerable#GetEnumerator">
2008       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2009       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
2010     </member>
2011     <member name="M:System.Collections.Generic.Queue`1.ToArray">
2012       <summary>
2013         <see cref="T:System.Collections.Generic.Queue`1" /> 요소를 새 배열에 복사합니다.</summary>
2014       <returns>
2015         <see cref="T:System.Collections.Generic.Queue`1" />에서 복사된 요소를 포함하는 새 배열입니다.</returns>
2016     </member>
2017     <member name="M:System.Collections.Generic.Queue`1.TrimExcess">
2018       <summary>
2019         <see cref="T:System.Collections.Generic.Queue`1" />의 실제 요소 수가 현재 용량의 90% 미만인 경우 용량을 이 값으로 설정합니다.</summary>
2020     </member>
2021     <member name="T:System.Collections.Generic.Queue`1.Enumerator">
2022       <summary>
2023         <see cref="T:System.Collections.Generic.Queue`1" />의 요소를 열거합니다.</summary>
2024     </member>
2025     <member name="P:System.Collections.Generic.Queue`1.Enumerator.Current">
2026       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2027       <returns>
2028         <see cref="T:System.Collections.Generic.Queue`1" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2029       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2030     </member>
2031     <member name="M:System.Collections.Generic.Queue`1.Enumerator.Dispose">
2032       <summary>
2033         <see cref="T:System.Collections.Generic.Queue`1.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
2034     </member>
2035     <member name="M:System.Collections.Generic.Queue`1.Enumerator.MoveNext">
2036       <summary>열거자를 <see cref="T:System.Collections.Generic.Queue`1" />의 다음 요소로 이동합니다.</summary>
2037       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
2038       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2039     </member>
2040     <member name="P:System.Collections.Generic.Queue`1.Enumerator.System#Collections#IEnumerator#Current">
2041       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2042       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2043       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2044     </member>
2045     <member name="M:System.Collections.Generic.Queue`1.Enumerator.System#Collections#IEnumerator#Reset">
2046       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
2047       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2048     </member>
2049     <member name="T:System.Collections.Generic.SortedDictionary`2">
2050       <summary>키에 따라 정렬된 키/값 쌍의 컬렉션을 나타냅니다. </summary>
2051       <typeparam name="TKey">사전에 있는 키의 형식입니다.</typeparam>
2052       <typeparam name="TValue">사전에 있는 값의 형식입니다.</typeparam>
2053       <filterpriority>1</filterpriority>
2054     </member>
2055     <member name="M:System.Collections.Generic.SortedDictionary`2.#ctor">
2056       <summary>비어 있고 키 형식에 대해 기본적으로 구현된 <see cref="T:System.Collections.Generic.IComparer`1" />를 사용하는 빈 <see cref="T:System.Collections.Generic.SortedDictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2057     </member>
2058     <member name="M:System.Collections.Generic.SortedDictionary`2.#ctor(System.Collections.Generic.IComparer{`0})">
2059       <summary>지정된 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현을 사용하여 키를 비교하는 빈 <see cref="T:System.Collections.Generic.SortedDictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2060       <param name="comparer">The <see cref="T:System.Collections.Generic.IComparer`1" /> implementation to use when comparing keys, or null to use the default <see cref="T:System.Collections.Generic.Comparer`1" /> for the type of the key.</param>
2061     </member>
2062     <member name="M:System.Collections.Generic.SortedDictionary`2.#ctor(System.Collections.Generic.IDictionary{`0,`1})">
2063       <summary>지정한 <see cref="T:System.Collections.Generic.IDictionary`2" />에서 복사된 요소를 포함하고 키 형식에 대해 기본적으로 구현된 <see cref="T:System.Collections.Generic.IComparer`1" />를 사용하는 <see cref="T:System.Collections.Generic.SortedDictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2064       <param name="dictionary">요소가 새 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 복사되는 <see cref="T:System.Collections.Generic.IDictionary`2" />입니다.</param>
2065       <exception cref="T:System.ArgumentNullException">
2066         <paramref name="dictionary" />가 null인 경우</exception>
2067       <exception cref="T:System.ArgumentException">
2068         <paramref name="dictionary" />에 중복 키가 하나 이상 포함된 경우</exception>
2069     </member>
2070     <member name="M:System.Collections.Generic.SortedDictionary`2.#ctor(System.Collections.Generic.IDictionary{`0,`1},System.Collections.Generic.IComparer{`0})">
2071       <summary>지정한 <see cref="T:System.Collections.Generic.IDictionary`2" />에서 복사된 요소를 포함하고 지정한 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현을 사용하여 키를 비교하는 <see cref="T:System.Collections.Generic.SortedDictionary`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2072       <param name="dictionary">요소가 새 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 복사되는 <see cref="T:System.Collections.Generic.IDictionary`2" />입니다.</param>
2073       <param name="comparer">The <see cref="T:System.Collections.Generic.IComparer`1" /> implementation to use when comparing keys, or null to use the default <see cref="T:System.Collections.Generic.Comparer`1" /> for the type of the key.</param>
2074       <exception cref="T:System.ArgumentNullException">
2075         <paramref name="dictionary" />가 null인 경우</exception>
2076       <exception cref="T:System.ArgumentException">
2077         <paramref name="dictionary" />에 중복 키가 하나 이상 포함된 경우</exception>
2078     </member>
2079     <member name="M:System.Collections.Generic.SortedDictionary`2.Add(`0,`1)">
2080       <summary>지정한 키와 값을 가지는 요소를 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 추가합니다.</summary>
2081       <param name="key">추가할 요소의 키입니다.</param>
2082       <param name="value">추가할 요소의 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
2083       <exception cref="T:System.ArgumentNullException">
2084         <paramref name="key" />가 null인 경우</exception>
2085       <exception cref="T:System.ArgumentException">같은 키를 가진 요소가 이미 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 있는 경우</exception>
2086     </member>
2087     <member name="M:System.Collections.Generic.SortedDictionary`2.Clear">
2088       <summary>
2089         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에서 모든 요소를 제거합니다.</summary>
2090     </member>
2091     <member name="P:System.Collections.Generic.SortedDictionary`2.Comparer">
2092       <summary>
2093         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 요소를 정렬하는 데 사용되는 <see cref="T:System.Collections.Generic.IComparer`1" />을 가져옵니다.</summary>
2094       <returns>
2095         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 요소를 정렬하는 데 사용되는 <see cref="T:System.Collections.Generic.IComparer`1" />입니다.</returns>
2096     </member>
2097     <member name="M:System.Collections.Generic.SortedDictionary`2.ContainsKey(`0)">
2098       <summary>
2099         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 지정된 키를 가진 요소가 포함되어 있는지 여부를 확인합니다.</summary>
2100       <returns>true if the <see cref="T:System.Collections.Generic.SortedDictionary`2" /> contains an element with the specified key; otherwise, false.</returns>
2101       <param name="key">
2102         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에서 찾을 키입니다.</param>
2103       <exception cref="T:System.ArgumentNullException">
2104         <paramref name="key" />가 null인 경우</exception>
2105     </member>
2106     <member name="M:System.Collections.Generic.SortedDictionary`2.ContainsValue(`1)">
2107       <summary>
2108         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 지정한 값이 있는 요소가 포함되어 있는지 여부를 확인합니다.</summary>
2109       <returns>true if the <see cref="T:System.Collections.Generic.SortedDictionary`2" /> contains an element with the specified value; otherwise, false.</returns>
2110       <param name="value">
2111         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에서 찾을 수 있는 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
2112     </member>
2113     <member name="M:System.Collections.Generic.SortedDictionary`2.CopyTo(System.Collections.Generic.KeyValuePair{`0,`1}[],System.Int32)">
2114       <summary>지정한 인덱스로부터 <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 요소를 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체의 지정한 배열에 복사합니다.</summary>
2115       <param name="array">현재 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에서 복사된 요소의 대상인 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체의 1차원 배열입니다. 이 배열의 인덱스는 0부터 시작해야 합니다.</param>
2116       <param name="index">복사가 시작되는 <paramref name="array" />의 0부터 시작하는 인덱스입니다.</param>
2117       <exception cref="T:System.ArgumentNullException">
2118         <paramref name="array" />가 null인 경우</exception>
2119       <exception cref="T:System.ArgumentOutOfRangeException">
2120         <paramref name="index" />가 0보다 작은 경우</exception>
2121       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
2122     </member>
2123     <member name="P:System.Collections.Generic.SortedDictionary`2.Count">
2124       <summary>
2125         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 포함된 키/값 쌍의 수를 가져옵니다.</summary>
2126       <returns>
2127         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 포함된 키/값 쌍의 수입니다.</returns>
2128     </member>
2129     <member name="M:System.Collections.Generic.SortedDictionary`2.GetEnumerator">
2130       <summary>
2131         <see cref="T:System.Collections.Generic.SortedDictionary`2" />을 반복하는 열거자를 반환합니다.</summary>
2132       <returns>
2133         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 대한 <see cref="T:System.Collections.Generic.SortedDictionary`2.Enumerator" />입니다.</returns>
2134     </member>
2135     <member name="P:System.Collections.Generic.SortedDictionary`2.Item(`0)">
2136       <summary>지정된 키에 연결된 값을 가져오거나 설정합니다.</summary>
2137       <returns>지정한 키와 연결된 값입니다.지정한 키가 없으면 get 작업에서 <see cref="T:System.Collections.Generic.KeyNotFoundException" />을 throw하고 set 작업에서 지정한 키가 있는 새 요소를 만듭니다.</returns>
2138       <param name="key">가져오거나 설정할 값의 키입니다.</param>
2139       <exception cref="T:System.ArgumentNullException">
2140         <paramref name="key" />가 null인 경우</exception>
2141       <exception cref="T:System.Collections.Generic.KeyNotFoundException">속성을 검색할 때 컬렉션에 <paramref name="key" />가 없는 경우</exception>
2142     </member>
2143     <member name="P:System.Collections.Generic.SortedDictionary`2.Keys">
2144       <summary>
2145         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 키를 포함하는 컬렉션을 가져옵니다.</summary>
2146       <returns>
2147         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 키를 포함하는 <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />입니다.</returns>
2148     </member>
2149     <member name="M:System.Collections.Generic.SortedDictionary`2.Remove(`0)">
2150       <summary>
2151         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에서 지정한 키를 가진 요소를 제거합니다.</summary>
2152       <returns>요소가 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="key" />가 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 없는 경우에도 false를 반환합니다.</returns>
2153       <param name="key">제거할 요소의 키입니다.</param>
2154       <exception cref="T:System.ArgumentNullException">
2155         <paramref name="key" />가 null인 경우</exception>
2156     </member>
2157     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#ICollection{T}#Add(System.Collections.Generic.KeyValuePair{`0,`1})">
2158       <summary>
2159         <see cref="T:System.Collections.Generic.ICollection`1" />에 항목을 추가합니다.</summary>
2160       <param name="keyValuePair">
2161         <see cref="T:System.Collections.Generic.ICollection`1" />에 추가할 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체입니다.</param>
2162       <exception cref="T:System.ArgumentNullException">
2163         <paramref name="keyValuePair" />가 null인 경우</exception>
2164       <exception cref="T:System.ArgumentException">같은 키를 가진 요소가 이미 <see cref="T:System.Collections.Generic.SortedDictionary`2" />에 있는 경우</exception>
2165     </member>
2166     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#ICollection{T}#Contains(System.Collections.Generic.KeyValuePair{`0,`1})">
2167       <summary>
2168         <see cref="T:System.Collections.Generic.ICollection`1" />에 특정 키와 값이 들어 있는지 여부를 확인합니다.</summary>
2169       <returns>true if <paramref name="keyValuePair" /> is found in the <see cref="T:System.Collections.Generic.ICollection`1" />; otherwise, false.</returns>
2170       <param name="keyValuePair">
2171         <see cref="T:System.Collections.Generic.ICollection`1" />에서 찾을 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체입니다.</param>
2172     </member>
2173     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#ICollection{T}#IsReadOnly">
2174       <summary>
2175         <see cref="T:System.Collections.Generic.ICollection`1" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
2176       <returns>
2177         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.SortedDictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2178     </member>
2179     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#ICollection{T}#Remove(System.Collections.Generic.KeyValuePair{`0,`1})">
2180       <summary>
2181         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 지정된 요소를 제거합니다.</summary>
2182       <returns>true if <paramref name="keyValuePair" /> was successfully removed from the <see cref="T:System.Collections.Generic.ICollection`1" />; otherwise, false.This method also returns false if <paramref name="keyValuePair" /> was not found in the <see cref="T:System.Collections.Generic.ICollection`1" />.</returns>
2183       <param name="keyValuePair">
2184         <see cref="T:System.Collections.Generic.ICollection`1" />에서 제거할 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 구조체입니다.</param>
2185     </member>
2186     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#IDictionary{TKey@TValue}#Keys">
2187       <summary>
2188         <see cref="T:System.Collections.Generic.IDictionary`2" />의 키를 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />을 가져옵니다.</summary>
2189       <returns>
2190         <see cref="T:System.Collections.Generic.IDictionary`2" />의 키를 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />입니다.</returns>
2191     </member>
2192     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#IDictionary{TKey@TValue}#Values">
2193       <summary>
2194         <see cref="T:System.Collections.Generic.IDictionary`2" />의 값을 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />을 가져옵니다.</summary>
2195       <returns>
2196         <see cref="T:System.Collections.Generic.IDictionary`2" />의 값을 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />입니다.</returns>
2197     </member>
2198     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
2199       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2200       <returns>컬렉션을 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
2201     </member>
2202     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#IReadOnlyDictionary{TKey@TValue}#Keys">
2203       <summary>키를 포함 하는 컬렉션을 가져옵니다는<see cref="T:System.Collections.Generic.SortedDictionary`2" /></summary>
2204       <returns>컬렉션에서 키를 포함 하는<see cref="T:System.Collections.Generic.SortedDictionary`2" /></returns>
2205     </member>
2206     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#Generic#IReadOnlyDictionary{TKey@TValue}#Values">
2207       <summary>값이 포함 된 컬렉션을 가져옵니다는<see cref="T:System.Collections.Generic.SortedDictionary`2" /></summary>
2208       <returns>컬렉션에서 값을 포함 하는<see cref="T:System.Collections.Generic.SortedDictionary`2" /></returns>
2209     </member>
2210     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
2211       <summary>지정한 배열 인덱스부터 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소를 배열에 복사합니다.</summary>
2212       <param name="array">
2213         <see cref="T:System.Collections.Generic.ICollection`1" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
2214       <param name="index">복사가 시작되는 <paramref name="array" />의 0부터 시작하는 인덱스입니다.</param>
2215       <exception cref="T:System.ArgumentNullException">
2216         <paramref name="array" />가 null인 경우</exception>
2217       <exception cref="T:System.ArgumentOutOfRangeException">
2218         <paramref name="index" />가 0보다 작은 경우</exception>
2219       <exception cref="T:System.ArgumentException">
2220         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.Generic.ICollection`1" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
2221     </member>
2222     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#ICollection#IsSynchronized">
2223       <summary>
2224         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
2225       <returns>true if access to the <see cref="T:System.Collections.ICollection" /> is synchronized (thread safe); otherwise, false.<see cref="T:System.Collections.Generic.SortedDictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2226     </member>
2227     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#ICollection#SyncRoot">
2228       <summary>
2229         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
2230       <returns>
2231         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다. </returns>
2232     </member>
2233     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#Add(System.Object,System.Object)">
2234       <summary>제공된 키와 값을 가진 요소를 <see cref="T:System.Collections.IDictionary" />에 추가합니다.</summary>
2235       <param name="key">추가할 요소의 키로 사용할 개체입니다.</param>
2236       <param name="value">추가할 요소의 값으로 사용할 개체입니다.</param>
2237       <exception cref="T:System.ArgumentNullException">
2238         <paramref name="key" />가 null인 경우</exception>
2239       <exception cref="T:System.ArgumentException">
2240         <paramref name="key" /> is of a type that is not assignable to the key type <paramref name="TKey" /> of the <see cref="T:System.Collections.IDictionary" />.또는<paramref name="value" />의 형식을 <see cref="T:System.Collections.IDictionary" />의 값 형식 <paramref name="TValue" />에 할당할 수 없는 경우또는같은 키를 가진 요소가 이미 <see cref="T:System.Collections.IDictionary" />에 있는 경우</exception>
2241     </member>
2242     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#Contains(System.Object)">
2243       <summary>
2244         <see cref="T:System.Collections.IDictionary" />에 지정된 키를 가진 요소가 포함되어 있는지 여부를 확인합니다.</summary>
2245       <returns>true if the <see cref="T:System.Collections.IDictionary" /> contains an element with the key; otherwise, false.</returns>
2246       <param name="key">
2247         <see cref="T:System.Collections.IDictionary" />에서 찾을 키입니다.</param>
2248       <exception cref="T:System.ArgumentNullException">
2249         <paramref name="key" />가 null인 경우</exception>
2250     </member>
2251     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#GetEnumerator">
2252       <summary>
2253         <see cref="T:System.Collections.IDictionary" />의 <see cref="T:System.Collections.IDictionaryEnumerator" />를 반환합니다.</summary>
2254       <returns>
2255         <see cref="T:System.Collections.IDictionary" />에 대한 <see cref="T:System.Collections.IDictionaryEnumerator" />입니다.</returns>
2256     </member>
2257     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#IsFixedSize">
2258       <summary>
2259         <see cref="T:System.Collections.IDictionary" />의 크기가 고정되어 있는지 여부를 나타내는 값을 가져옵니다.</summary>
2260       <returns>true if the <see cref="T:System.Collections.IDictionary" /> has a fixed size; otherwise, false.<see cref="T:System.Collections.Generic.SortedDictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2261     </member>
2262     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#IsReadOnly">
2263       <summary>
2264         <see cref="T:System.Collections.IDictionary" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
2265       <returns>true if the <see cref="T:System.Collections.IDictionary" /> is read-only; otherwise, false.<see cref="T:System.Collections.Generic.SortedDictionary`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2266     </member>
2267     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#Item(System.Object)">
2268       <summary>지정한 키를 가진 요소를 가져오거나 설정합니다.</summary>
2269       <returns>지정한 키를 갖는 요소입니다. <paramref name="key" />가 사전에 없거나 <paramref name="key" />의 형식을 <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 <paramref name="TKey" /> 키 형식에 할당할 수 없으면 null입니다.</returns>
2270       <param name="key">가져올 요소의 키입니다.</param>
2271       <exception cref="T:System.ArgumentNullException">
2272         <paramref name="key" />가 null인 경우</exception>
2273       <exception cref="T:System.ArgumentException">A value is being assigned, and <paramref name="key" /> is of a type that is not assignable to the key type <paramref name="TKey" /> of the <see cref="T:System.Collections.Generic.SortedDictionary`2" />.또는A value is being assigned, and <paramref name="value" /> is of a type that is not assignable to the value type <paramref name="TValue" /> of the <see cref="T:System.Collections.Generic.SortedDictionary`2" />.</exception>
2274     </member>
2275     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#Keys">
2276       <summary>
2277         <see cref="T:System.Collections.IDictionary" />의 키를 포함하는 <see cref="T:System.Collections.ICollection" />을 가져옵니다.</summary>
2278       <returns>
2279         <see cref="T:System.Collections.IDictionary" />의 키를 포함하는 <see cref="T:System.Collections.ICollection" />입니다.</returns>
2280     </member>
2281     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#Remove(System.Object)">
2282       <summary>
2283         <see cref="T:System.Collections.IDictionary" />에서 지정한 키를 가진 요소를 제거합니다.</summary>
2284       <param name="key">제거할 요소의 키입니다.</param>
2285       <exception cref="T:System.ArgumentNullException">
2286         <paramref name="key" />가 null인 경우</exception>
2287     </member>
2288     <member name="P:System.Collections.Generic.SortedDictionary`2.System#Collections#IDictionary#Values">
2289       <summary>
2290         <see cref="T:System.Collections.IDictionary" />의 값을 포함하는 <see cref="T:System.Collections.ICollection" />을 가져옵니다.</summary>
2291       <returns>
2292         <see cref="T:System.Collections.IDictionary" />의 값을 포함하는 <see cref="T:System.Collections.ICollection" />입니다.</returns>
2293     </member>
2294     <member name="M:System.Collections.Generic.SortedDictionary`2.System#Collections#IEnumerable#GetEnumerator">
2295       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2296       <returns>컬렉션을 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
2297     </member>
2298     <member name="M:System.Collections.Generic.SortedDictionary`2.TryGetValue(`0,`1@)">
2299       <summary>지정한 키와 연결된 값을 가져옵니다.</summary>
2300       <returns>true if the <see cref="T:System.Collections.Generic.SortedDictionary`2" /> contains an element with the specified key; otherwise, false.</returns>
2301       <param name="key">가져올 값의 키입니다.</param>
2302       <param name="value">이 메서드가 반환될 때 지정한 키가 있으면 해당 키와 연결된 값이고, 그렇지 않으면 <paramref name="value" /> 매개 변수 형식의 기본값을 포함합니다. </param>
2303       <exception cref="T:System.ArgumentNullException">
2304         <paramref name="key" />가 null인 경우</exception>
2305     </member>
2306     <member name="P:System.Collections.Generic.SortedDictionary`2.Values">
2307       <summary>
2308         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 값을 포함하는 컬렉션을 가져옵니다.</summary>
2309       <returns>
2310         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 값을 포함하는 <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />입니다.</returns>
2311     </member>
2312     <member name="T:System.Collections.Generic.SortedDictionary`2.Enumerator">
2313       <summary>
2314         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 요소를 열거합니다.</summary>
2315     </member>
2316     <member name="P:System.Collections.Generic.SortedDictionary`2.Enumerator.Current">
2317       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2318       <returns>
2319         <see cref="T:System.Collections.Generic.SortedDictionary`2" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2320     </member>
2321     <member name="M:System.Collections.Generic.SortedDictionary`2.Enumerator.Dispose">
2322       <summary>
2323         <see cref="T:System.Collections.Generic.SortedDictionary`2.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
2324     </member>
2325     <member name="M:System.Collections.Generic.SortedDictionary`2.Enumerator.MoveNext">
2326       <summary>열거자를 <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 다음 요소로 이동합니다.</summary>
2327       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
2328       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2329     </member>
2330     <member name="P:System.Collections.Generic.SortedDictionary`2.Enumerator.System#Collections#IDictionaryEnumerator#Entry">
2331       <summary>열거자의 현재 위치에 있는 요소를 <see cref="T:System.Collections.DictionaryEntry" /> 구조체로 가져옵니다.</summary>
2332       <returns>컬렉션에서 사전의 현재 위치에 있는 요소인 <see cref="T:System.Collections.DictionaryEntry" /> 구조체입니다.</returns>
2333       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2334     </member>
2335     <member name="P:System.Collections.Generic.SortedDictionary`2.Enumerator.System#Collections#IDictionaryEnumerator#Key">
2336       <summary>열거자의 현재 위치에 있는 요소의 키를 가져옵니다.</summary>
2337       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소의 키입니다.</returns>
2338       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2339     </member>
2340     <member name="P:System.Collections.Generic.SortedDictionary`2.Enumerator.System#Collections#IDictionaryEnumerator#Value">
2341       <summary>열거자의 현재 위치에 있는 요소의 값을 가져옵니다.</summary>
2342       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소의 값입니다.</returns>
2343       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2344     </member>
2345     <member name="P:System.Collections.Generic.SortedDictionary`2.Enumerator.System#Collections#IEnumerator#Current">
2346       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2347       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2348       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2349     </member>
2350     <member name="M:System.Collections.Generic.SortedDictionary`2.Enumerator.System#Collections#IEnumerator#Reset">
2351       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
2352       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2353     </member>
2354     <member name="T:System.Collections.Generic.SortedDictionary`2.KeyCollection">
2355       <summary>
2356         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 키 컬렉션을 나타냅니다.이 클래스는 상속될 수 없습니다.</summary>
2357     </member>
2358     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.#ctor(System.Collections.Generic.SortedDictionary{`0,`1})">
2359       <summary>지정한 <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 키를 반영하는 <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2360       <param name="dictionary">해당 키가 새 <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />에 반영되는 <see cref="T:System.Collections.Generic.SortedDictionary`2" />입니다.</param>
2361       <exception cref="T:System.ArgumentNullException">
2362         <paramref name="dictionary" />가 null입니다.</exception>
2363     </member>
2364     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.CopyTo(`0[],System.Int32)">
2365       <summary>
2366         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" /> 요소를 지정한 배열 인덱스에서 시작하여 기존의 1차원 배열에 복사합니다.</summary>
2367       <param name="array">
2368         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에서 0부터 시작하는 인덱스를 사용해야 합니다.</param>
2369       <param name="index">
2370         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
2371       <exception cref="T:System.ArgumentNullException">
2372         <paramref name="array" />가 null입니다. </exception>
2373       <exception cref="T:System.ArgumentOutOfRangeException">
2374         <paramref name="index" />가 0보다 작은 경우</exception>
2375       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
2376     </member>
2377     <member name="P:System.Collections.Generic.SortedDictionary`2.KeyCollection.Count">
2378       <summary>
2379         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />에 포함된 요소 수를 가져옵니다.</summary>
2380       <returns>
2381         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />에 포함된 요소 수입니다.</returns>
2382     </member>
2383     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.GetEnumerator">
2384       <summary>
2385         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />을 반복하는 열거자를 반환합니다.</summary>
2386       <returns>
2387         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />에 대한 <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator" /> 구조체입니다.</returns>
2388     </member>
2389     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Add(`0)">
2390       <summary>
2391         <see cref="T:System.Collections.Generic.ICollection`1" />에 항목을 추가합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2392       <param name="item">
2393         <see cref="T:System.Collections.Generic.ICollection`1" />에 추가할 개체입니다.</param>
2394       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2395     </member>
2396     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Clear">
2397       <summary>
2398         <see cref="T:System.Collections.Generic.ICollection`1" />에서 항목을 모두 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2399       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2400     </member>
2401     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Contains(`0)">
2402       <summary>
2403         <see cref="T:System.Collections.Generic.ICollection`1" />에 지정한 값이 들어 있는지 여부를 확인합니다.</summary>
2404       <returns>
2405         <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
2406       <param name="item">
2407         <see cref="T:System.Collections.Generic.ICollection`1" />에서 찾을 개체입니다.</param>
2408     </member>
2409     <member name="P:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#IsReadOnly">
2410       <summary>
2411         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
2412       <returns>
2413         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2414     </member>
2415     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#Generic#ICollection{T}#Remove(`0)">
2416       <summary>
2417         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 특정 개체를 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2418       <returns>
2419         <paramref name="item" />이 <see cref="T:System.Collections.Generic.ICollection`1" />에서 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 없는 경우에도 false를 반환합니다.</returns>
2420       <param name="item">
2421         <see cref="T:System.Collections.Generic.ICollection`1" />에서 제거할 개체입니다.</param>
2422       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2423     </member>
2424     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
2425       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2426       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
2427     </member>
2428     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
2429       <summary>특정 배열 인덱스부터 <see cref="T:System.Collections.ICollection" />의 요소를 배열에 복사합니다.</summary>
2430       <param name="array">
2431         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에서 0부터 시작하는 인덱스를 사용해야 합니다.</param>
2432       <param name="index">
2433         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
2434       <exception cref="T:System.ArgumentNullException">
2435         <paramref name="array" />가 null입니다.</exception>
2436       <exception cref="T:System.ArgumentOutOfRangeException">
2437         <paramref name="index" />가 0보다 작은 경우</exception>
2438       <exception cref="T:System.ArgumentException">
2439         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
2440     </member>
2441     <member name="P:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#ICollection#IsSynchronized">
2442       <summary>
2443         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
2444       <returns>
2445         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2446     </member>
2447     <member name="P:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#ICollection#SyncRoot">
2448       <summary>
2449         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
2450       <returns>
2451         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.  <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
2452     </member>
2453     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.System#Collections#IEnumerable#GetEnumerator">
2454       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2455       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
2456     </member>
2457     <member name="T:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator">
2458       <summary>
2459         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />의 요소를 열거합니다.</summary>
2460     </member>
2461     <member name="P:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator.Current">
2462       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2463       <returns>
2464         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2465     </member>
2466     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator.Dispose">
2467       <summary>
2468         <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
2469     </member>
2470     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator.MoveNext">
2471       <summary>열거자를 <see cref="T:System.Collections.Generic.SortedDictionary`2.KeyCollection" />의 다음 요소로 이동합니다.</summary>
2472       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
2473       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2474     </member>
2475     <member name="P:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator.System#Collections#IEnumerator#Current">
2476       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2477       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2478       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2479     </member>
2480     <member name="M:System.Collections.Generic.SortedDictionary`2.KeyCollection.Enumerator.System#Collections#IEnumerator#Reset">
2481       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
2482       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2483     </member>
2484     <member name="T:System.Collections.Generic.SortedDictionary`2.ValueCollection">
2485       <summary>
2486         <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 값 컬렉션을 나타냅니다.이 클래스는 상속될 수 없습니다.</summary>
2487     </member>
2488     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.#ctor(System.Collections.Generic.SortedDictionary{`0,`1})">
2489       <summary>지정한 <see cref="T:System.Collections.Generic.SortedDictionary`2" />의 값을 반영하는 <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2490       <param name="dictionary">해당 값이 새 <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />에 반영되는 <see cref="T:System.Collections.Generic.SortedDictionary`2" />입니다.</param>
2491       <exception cref="T:System.ArgumentNullException">
2492         <paramref name="dictionary" />가 null입니다.</exception>
2493     </member>
2494     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.CopyTo(`1[],System.Int32)">
2495       <summary>
2496         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" /> 요소를 지정한 배열 인덱스에서 시작하여 기존의 1차원 배열에 복사합니다.</summary>
2497       <param name="array">
2498         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에서 0부터 시작하는 인덱스를 사용해야 합니다.</param>
2499       <param name="index">
2500         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
2501       <exception cref="T:System.ArgumentNullException">
2502         <paramref name="array" />가 null입니다.</exception>
2503       <exception cref="T:System.ArgumentOutOfRangeException">
2504         <paramref name="index" />가 0보다 작은 경우</exception>
2505       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
2506     </member>
2507     <member name="P:System.Collections.Generic.SortedDictionary`2.ValueCollection.Count">
2508       <summary>
2509         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />에 포함된 요소 수를 가져옵니다.</summary>
2510       <returns>
2511         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />에 포함된 요소 수입니다.</returns>
2512     </member>
2513     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.GetEnumerator">
2514       <summary>
2515         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />을 반복하는 열거자를 반환합니다.</summary>
2516       <returns>
2517         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />에 대한 <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator" /> 구조체입니다.</returns>
2518     </member>
2519     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Add(`1)">
2520       <summary>
2521         <see cref="T:System.Collections.Generic.ICollection`1" />에 항목을 추가합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2522       <param name="item">
2523         <see cref="T:System.Collections.Generic.ICollection`1" />에 추가할 개체입니다.</param>
2524       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2525     </member>
2526     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Clear">
2527       <summary>
2528         <see cref="T:System.Collections.Generic.ICollection`1" />에서 항목을 모두 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2529       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2530     </member>
2531     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Contains(`1)">
2532       <summary>
2533         <see cref="T:System.Collections.Generic.ICollection`1" />에 지정한 값이 들어 있는지 여부를 확인합니다.</summary>
2534       <returns>
2535         <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
2536       <param name="item">
2537         <see cref="T:System.Collections.Generic.ICollection`1" />에서 찾을 개체입니다.</param>
2538     </member>
2539     <member name="P:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#IsReadOnly">
2540       <summary>
2541         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
2542       <returns>
2543         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2544     </member>
2545     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#Generic#ICollection{T}#Remove(`1)">
2546       <summary>
2547         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 특정 개체를 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2548       <returns>
2549         <paramref name="item" />이 <see cref="T:System.Collections.Generic.ICollection`1" />에서 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 없는 경우에도 false를 반환합니다.</returns>
2550       <param name="item">
2551         <see cref="T:System.Collections.Generic.ICollection`1" />에서 제거할 개체입니다.</param>
2552       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2553     </member>
2554     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
2555       <summary>
2556         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 특정 개체를 제거합니다.  이 구현은 항상 <see cref="T:System.NotSupportedException" />을 throw합니다.</summary>
2557       <returns>
2558         <paramref name="item" />이 <see cref="T:System.Collections.Generic.ICollection`1" />에서 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.이 메서드는 <paramref name="item" />가 <see cref="T:System.Collections.Generic.ICollection`1" />에 없는 경우에도 false를 반환합니다.</returns>
2559       <exception cref="T:System.NotSupportedException">항상 throw됩니다. 컬렉션이 읽기 전용입니다.</exception>
2560     </member>
2561     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
2562       <summary>특정 배열 인덱스부터 <see cref="T:System.Collections.ICollection" />의 요소를 배열에 복사합니다.</summary>
2563       <param name="array">
2564         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에서 0부터 시작하는 인덱스를 사용해야 합니다.</param>
2565       <param name="index">
2566         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
2567       <exception cref="T:System.ArgumentNullException">
2568         <paramref name="array" />가 null입니다.</exception>
2569       <exception cref="T:System.ArgumentOutOfRangeException">
2570         <paramref name="index" />가 0보다 작은 경우</exception>
2571       <exception cref="T:System.ArgumentException">
2572         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="index" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
2573     </member>
2574     <member name="P:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#ICollection#IsSynchronized">
2575       <summary>
2576         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
2577       <returns>
2578         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.  <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2579     </member>
2580     <member name="P:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#ICollection#SyncRoot">
2581       <summary>
2582         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
2583       <returns>
2584         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.  <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
2585     </member>
2586     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.System#Collections#IEnumerable#GetEnumerator">
2587       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2588       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
2589     </member>
2590     <member name="T:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator">
2591       <summary>
2592         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />의 요소를 열거합니다.</summary>
2593     </member>
2594     <member name="P:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator.Current">
2595       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2596       <returns>
2597         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2598     </member>
2599     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator.Dispose">
2600       <summary>
2601         <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
2602     </member>
2603     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator.MoveNext">
2604       <summary>열거자를 <see cref="T:System.Collections.Generic.SortedDictionary`2.ValueCollection" />의 다음 요소로 이동합니다.</summary>
2605       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
2606       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2607     </member>
2608     <member name="P:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator.System#Collections#IEnumerator#Current">
2609       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
2610       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
2611       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
2612     </member>
2613     <member name="M:System.Collections.Generic.SortedDictionary`2.ValueCollection.Enumerator.System#Collections#IEnumerator#Reset">
2614       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
2615       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
2616     </member>
2617     <member name="T:System.Collections.Generic.SortedList`2">
2618       <summary>연관된 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현을 기반으로 키에 따라 정렬된 키/값 쌍의 컬렉션을 나타냅니다. </summary>
2619       <typeparam name="TKey">컬렉션에 있는 키의 형식입니다.</typeparam>
2620       <typeparam name="TValue">컬렉션에 있는 값의 형식입니다.</typeparam>
2621     </member>
2622     <member name="M:System.Collections.Generic.SortedList`2.#ctor">
2623       <summary>기본 초기 용량을 갖고 있고 기본 <see cref="T:System.Collections.Generic.IComparer`1" />을 사용하는 비어 있는 <see cref="T:System.Collections.Generic.SortedList`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2624     </member>
2625     <member name="M:System.Collections.Generic.SortedList`2.#ctor(System.Collections.Generic.IComparer{`0})">
2626       <summary>기본 초기 용량을 갖고 있고 지정된 <see cref="T:System.Collections.Generic.IComparer`1" />을 사용하는 비어 있는 <see cref="T:System.Collections.Generic.SortedList`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2627       <param name="comparer">키를 비교할 때 사용하는 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현입니다.또는null이면 기본 <see cref="T:System.Collections.Generic.Comparer`1" />을 키의 형식으로 사용합니다.</param>
2628     </member>
2629     <member name="M:System.Collections.Generic.SortedList`2.#ctor(System.Collections.Generic.IDictionary{`0,`1})">
2630       <summary>지정된 <see cref="T:System.Collections.Generic.IDictionary`2" />에서 복사된 요소가 포함되어 있고, 복사된 요소의 수를 수용할 수 있는 충분한 용량을 가지며, 기본 <see cref="T:System.Collections.Generic.IComparer`1" />을 사용하는 <see cref="T:System.Collections.Generic.SortedList`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2631       <param name="dictionary">요소가 새 <see cref="T:System.Collections.Generic.SortedList`2" />에 복사되는 <see cref="T:System.Collections.Generic.IDictionary`2" />입니다.</param>
2632       <exception cref="T:System.ArgumentNullException">
2633         <paramref name="dictionary" />가 null인 경우</exception>
2634       <exception cref="T:System.ArgumentException">
2635         <paramref name="dictionary" />에 중복 키가 하나 이상 포함된 경우</exception>
2636     </member>
2637     <member name="M:System.Collections.Generic.SortedList`2.#ctor(System.Collections.Generic.IDictionary{`0,`1},System.Collections.Generic.IComparer{`0})">
2638       <summary>지정된 <see cref="T:System.Collections.Generic.IDictionary`2" />에서 복사된 요소가 포함되어 있고, 복사된 요소의 수를 수용할 수 있는 충분한 용량을 가지며, 지정된 <see cref="T:System.Collections.Generic.IComparer`1" />을 사용하는 <see cref="T:System.Collections.Generic.SortedList`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2639       <param name="dictionary">요소가 새 <see cref="T:System.Collections.Generic.SortedList`2" />에 복사되는 <see cref="T:System.Collections.Generic.IDictionary`2" />입니다.</param>
2640       <param name="comparer">키를 비교할 때 사용하는 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현입니다.또는null이면 기본 <see cref="T:System.Collections.Generic.Comparer`1" />을 키의 형식으로 사용합니다.</param>
2641       <exception cref="T:System.ArgumentNullException">
2642         <paramref name="dictionary" />가 null인 경우</exception>
2643       <exception cref="T:System.ArgumentException">
2644         <paramref name="dictionary" />에 중복 키가 하나 이상 포함된 경우</exception>
2645     </member>
2646     <member name="M:System.Collections.Generic.SortedList`2.#ctor(System.Int32)">
2647       <summary>지정된 초기 용량을 갖고 있고 기본 <see cref="T:System.Collections.Generic.IComparer`1" />을 사용하는 비어 있는 <see cref="T:System.Collections.Generic.SortedList`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2648       <param name="capacity">
2649         <see cref="T:System.Collections.Generic.SortedList`2" />에 포함될 수 있는 초기 요소 수입니다.</param>
2650       <exception cref="T:System.ArgumentOutOfRangeException">
2651         <paramref name="capacity" />가 0보다 작은 경우</exception>
2652     </member>
2653     <member name="M:System.Collections.Generic.SortedList`2.#ctor(System.Int32,System.Collections.Generic.IComparer{`0})">
2654       <summary>지정된 초기 용량을 갖고 있고 지정된 <see cref="T:System.Collections.Generic.IComparer`1" />을 사용하는 비어 있는 <see cref="T:System.Collections.Generic.SortedList`2" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2655       <param name="capacity">
2656         <see cref="T:System.Collections.Generic.SortedList`2" />에 포함될 수 있는 초기 요소 수입니다.</param>
2657       <param name="comparer">키를 비교할 때 사용하는 <see cref="T:System.Collections.Generic.IComparer`1" /> 구현입니다.또는null이면 기본 <see cref="T:System.Collections.Generic.Comparer`1" />을 키의 형식으로 사용합니다.</param>
2658       <exception cref="T:System.ArgumentOutOfRangeException">
2659         <paramref name="capacity" />가 0보다 작은 경우</exception>
2660     </member>
2661     <member name="M:System.Collections.Generic.SortedList`2.Add(`0,`1)">
2662       <summary>지정한 키와 값을 가지는 요소를 <see cref="T:System.Collections.Generic.SortedList`2" />에 추가합니다.</summary>
2663       <param name="key">추가할 요소의 키입니다.</param>
2664       <param name="value">추가할 요소의 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
2665       <exception cref="T:System.ArgumentNullException">
2666         <paramref name="key" />가 null인 경우</exception>
2667       <exception cref="T:System.ArgumentException">같은 키를 가진 요소가 이미 <see cref="T:System.Collections.Generic.SortedList`2" />에 있는 경우</exception>
2668     </member>
2669     <member name="P:System.Collections.Generic.SortedList`2.Capacity">
2670       <summary>
2671         <see cref="T:System.Collections.Generic.SortedList`2" />에 포함될 수 있는 요소의 수를 가져오거나 설정합니다.</summary>
2672       <returns>
2673         <see cref="T:System.Collections.Generic.SortedList`2" />에 포함될 수 있는 요소의 수입니다.</returns>
2674       <exception cref="T:System.ArgumentOutOfRangeException">
2675         <see cref="P:System.Collections.Generic.SortedList`2.Capacity" />가 <see cref="P:System.Collections.Generic.SortedList`2.Count" />보다 작은 값으로 설정된 경우</exception>
2676       <exception cref="T:System.OutOfMemoryException">시스템에 사용 가능한 메모리가 부족합니다.</exception>
2677     </member>
2678     <member name="M:System.Collections.Generic.SortedList`2.Clear">
2679       <summary>
2680         <see cref="T:System.Collections.Generic.SortedList`2" />에서 모든 요소를 제거합니다.</summary>
2681     </member>
2682     <member name="P:System.Collections.Generic.SortedList`2.Comparer">
2683       <summary>정렬된 목록에 대한 <see cref="T:System.Collections.Generic.IComparer`1" />을 가져옵니다. </summary>
2684       <returns>현재 <see cref="T:System.Collections.Generic.SortedList`2" />에 대한 <see cref="T:System.IComparable`1" />입니다.</returns>
2685     </member>
2686     <member name="M:System.Collections.Generic.SortedList`2.ContainsKey(`0)">
2687       <summary>
2688         <see cref="T:System.Collections.Generic.SortedList`2" />에 특정 키가 들어 있는지 여부를 확인합니다.</summary>
2689       <returns>true if the <see cref="T:System.Collections.Generic.SortedList`2" /> contains an element with the specified key; otherwise, false.</returns>
2690       <param name="key">
2691         <see cref="T:System.Collections.Generic.SortedList`2" />에서 찾을 키입니다.</param>
2692       <exception cref="T:System.ArgumentNullException">
2693         <paramref name="key" />가 null인 경우</exception>
2694     </member>
2695     <member name="M:System.Collections.Generic.SortedList`2.ContainsValue(`1)">
2696       <summary>
2697         <see cref="T:System.Collections.Generic.SortedList`2" />에 특정 값이 들어 있는지 여부를 확인합니다.</summary>
2698       <returns>true if the <see cref="T:System.Collections.Generic.SortedList`2" /> contains an element with the specified value; otherwise, false.</returns>
2699       <param name="value">
2700         <see cref="T:System.Collections.Generic.SortedList`2" />에서 찾을 수 있는 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
2701     </member>
2702     <member name="P:System.Collections.Generic.SortedList`2.Count">
2703       <summary>
2704         <see cref="T:System.Collections.Generic.SortedList`2" />에 포함된 키/값 쌍의 수를 가져옵니다.</summary>
2705       <returns>
2706         <see cref="T:System.Collections.Generic.SortedList`2" />에 포함된 키/값 쌍의 수입니다.</returns>
2707     </member>
2708     <member name="M:System.Collections.Generic.SortedList`2.GetEnumerator">
2709       <summary>
2710         <see cref="T:System.Collections.Generic.SortedList`2" />을 반복하는 열거자를 반환합니다.</summary>
2711       <returns>
2712         <see cref="T:System.Collections.Generic.SortedList`2" />에 대한 <see cref="T:System.Collections.Generic.KeyValuePair`2" /> 형식의 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
2713     </member>
2714     <member name="M:System.Collections.Generic.SortedList`2.IndexOfKey(`0)">
2715       <summary>지정한 키를 검색하고 전체 <see cref="T:System.Collections.Generic.SortedList`2" />에서 인덱스(0부터 시작)를 반환합니다.</summary>
2716       <returns>전체 <see cref="T:System.Collections.Generic.SortedList`2" />에 <paramref name="key" />가 있으면 해당 인덱스(0부터 시작)이고, 그렇지 않으면 -1입니다.</returns>
2717       <param name="key">
2718         <see cref="T:System.Collections.Generic.SortedList`2" />에서 찾을 키입니다.</param>
2719       <exception cref="T:System.ArgumentNullException">
2720         <paramref name="key" />가 null인 경우</exception>
2721     </member>
2722     <member name="M:System.Collections.Generic.SortedList`2.IndexOfValue(`1)">
2723       <summary>지정한 값을 검색하고 전체 <see cref="T:System.Collections.Generic.SortedList`2" />에서 이 값이 맨 처음 발견되는 인덱스(0부터 시작)를 반환합니다.</summary>
2724       <returns>
2725         <paramref name="value" />이 있으면 전체 <see cref="T:System.Collections.Generic.SortedList`2" />에서 맨 처음 발견되는 값의 0부터 시작하는 인덱스이고, 그렇지 않으면 -1입니다.</returns>
2726       <param name="value">
2727         <see cref="T:System.Collections.Generic.SortedList`2" />에서 찾을 수 있는 값입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
2728     </member>
2729     <member name="P:System.Collections.Generic.SortedList`2.Item(`0)">
2730       <summary>지정된 키에 연결된 값을 가져오거나 설정합니다.</summary>
2731       <returns>지정한 키와 연결된 값입니다.지정한 키가 없으면 get 작업에서 <see cref="T:System.Collections.Generic.KeyNotFoundException" />을 throw하고 set 작업에서 지정한 키를 사용하여 새 요소를 만듭니다.</returns>
2732       <param name="key">가져오거나 설정할 값이 있는 키입니다.</param>
2733       <exception cref="T:System.ArgumentNullException">
2734         <paramref name="key" />가 null인 경우</exception>
2735       <exception cref="T:System.Collections.Generic.KeyNotFoundException">속성을 검색할 때 컬렉션에 <paramref name="key" />가 없는 경우</exception>
2736     </member>
2737     <member name="P:System.Collections.Generic.SortedList`2.Keys">
2738       <summary>
2739         <see cref="T:System.Collections.Generic.SortedList`2" />에 있는 키가 들어있는 컬렉션을 정렬 순서대로 가져옵니다.</summary>
2740       <returns>
2741         <see cref="T:System.Collections.Generic.SortedList`2" />의 키를 포함하는 <see cref="T:System.Collections.Generic.IList`1" />입니다.</returns>
2742     </member>
2743     <member name="M:System.Collections.Generic.SortedList`2.Remove(`0)">
2744       <summary>
2745         <see cref="T:System.Collections.Generic.SortedList`2" />에서 지정한 키를 가진 요소를 제거합니다.</summary>
2746       <returns>요소가 성공적으로 제거되면 true이고, 그렇지 않으면 false입니다.This method also returns false if <paramref name="key" /> was not found in the original <see cref="T:System.Collections.Generic.SortedList`2" />.</returns>
2747       <param name="key">제거할 요소의 키입니다.</param>
2748       <exception cref="T:System.ArgumentNullException">
2749         <paramref name="key" />가 null인 경우</exception>
2750     </member>
2751     <member name="M:System.Collections.Generic.SortedList`2.RemoveAt(System.Int32)">
2752       <summary>
2753         <see cref="T:System.Collections.Generic.SortedList`2" />의 지정된 인덱스에 있는 요소를 제거합니다.</summary>
2754       <param name="index">제거할 요소의 인덱스(0부터 시작)입니다.</param>
2755       <exception cref="T:System.ArgumentOutOfRangeException">
2756         <paramref name="index" />가 0보다 작은 경우또는<paramref name="index" />가 <see cref="P:System.Collections.Generic.SortedList`2.Count" />보다 크거나 같은 경우</exception>
2757     </member>
2758     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#Generic#ICollection{T}#Add(System.Collections.Generic.KeyValuePair{`0,`1})">
2759       <summary>
2760         <see cref="T:System.Collections.Generic.ICollection`1" />에 키/값 쌍을 추가합니다.</summary>
2761       <param name="keyValuePair">
2762         <see cref="T:System.Collections.Generic.ICollection`1" />에 추가할 <see cref="T:System.Collections.Generic.KeyValuePair`2" />입니다.</param>
2763     </member>
2764     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#Generic#ICollection{T}#Contains(System.Collections.Generic.KeyValuePair{`0,`1})">
2765       <summary>
2766         <see cref="T:System.Collections.Generic.ICollection`1" />에 특정 요소가 들어 있는지 여부를 확인합니다.</summary>
2767       <returns>true if <paramref name="keyValuePair" /> is found in the <see cref="T:System.Collections.Generic.ICollection`1" />; otherwise, false.</returns>
2768       <param name="keyValuePair">
2769         <see cref="T:System.Collections.Generic.ICollection`1" />에서 찾을 <see cref="T:System.Collections.Generic.KeyValuePair`2" />입니다.</param>
2770     </member>
2771     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#Generic#ICollection{T}#CopyTo(System.Collections.Generic.KeyValuePair{`0,`1}[],System.Int32)">
2772       <summary>특정 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
2773       <param name="array">
2774         <see cref="T:System.Collections.Generic.ICollection`1" />에서 복사한 요소의 대상인 일차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
2775       <param name="arrayIndex">복사가 시작되는 <paramref name="array" />의 0부터 시작하는 인덱스입니다.</param>
2776       <exception cref="T:System.ArgumentNullException">
2777         <paramref name="array" />가 null인 경우 </exception>
2778       <exception cref="T:System.ArgumentOutOfRangeException">
2779         <paramref name="arrayIndex" />가 0보다 작은 경우 </exception>
2780       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.ICollection`1" />의 요소 수가 <paramref name="arrayIndex" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우</exception>
2781     </member>
2782     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#Generic#ICollection{T}#IsReadOnly">
2783       <summary>
2784         <see cref="T:System.Collections.Generic.ICollection`1" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
2785       <returns>
2786         <see cref="T:System.Collections.Generic.ICollection`1" />이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.SortedList`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2787     </member>
2788     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#Generic#ICollection{T}#Remove(System.Collections.Generic.KeyValuePair{`0,`1})">
2789       <summary>
2790         <see cref="T:System.Collections.Generic.ICollection`1" />에서 맨 처음 발견되는 특정 키/값 쌍을 제거합니다.</summary>
2791       <returns>true if <paramref name="keyValuePair" /> was successfully removed from the <see cref="T:System.Collections.Generic.ICollection`1" />; otherwise, false.This method also returns false if <paramref name="keyValuePair" /> was not found in the original <see cref="T:System.Collections.Generic.ICollection`1" />.</returns>
2792       <param name="keyValuePair">
2793         <see cref="T:System.Collections.Generic.ICollection`1" />에서 제거할 <see cref="T:System.Collections.Generic.KeyValuePair`2" />입니다.</param>
2794     </member>
2795     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#Generic#IDictionary{TKey@TValue}#Keys">
2796       <summary>
2797         <see cref="T:System.Collections.Generic.IDictionary`2" />의 키를 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />을 가져옵니다.</summary>
2798       <returns>
2799         <see cref="T:System.Collections.Generic.IDictionary`2" />의 키를 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />입니다.</returns>
2800     </member>
2801     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#Generic#IDictionary{TKey@TValue}#Values">
2802       <summary>
2803         <see cref="T:System.Collections.Generic.IDictionary`2" />의 값을 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />을 가져옵니다.</summary>
2804       <returns>
2805         <see cref="T:System.Collections.Generic.IDictionary`2" />의 값을 포함하는 <see cref="T:System.Collections.Generic.ICollection`1" />입니다.</returns>
2806     </member>
2807     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
2808       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2809       <returns>컬렉션을 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
2810     </member>
2811     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#Generic#IReadOnlyDictionary{TKey@TValue}#Keys">
2812       <summary>읽기 전용 사전의 키를 포함하는 열거 가능한 컬렉션을 가져옵니다.</summary>
2813       <returns>읽기 전용 사전의 키를 포함하는 열거 가능한 컬렉션입니다.</returns>
2814     </member>
2815     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#Generic#IReadOnlyDictionary{TKey@TValue}#Values">
2816       <summary>읽기 전용 사전의 값을 포함하는 열거 가능한 컬렉션을 가져옵니다.</summary>
2817       <returns>읽기 전용 사전의 값을 포함하는 열거 가능한 컬렉션입니다.</returns>
2818     </member>
2819     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
2820       <summary>특정 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
2821       <param name="array">The one-dimensional <see cref="T:System.Array" /> that is the destination of the elements copied from <see cref="T:System.Collections.ICollection" />.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
2822       <param name="arrayIndex">복사가 시작되는 <paramref name="array" />의 0부터 시작하는 인덱스입니다.</param>
2823       <exception cref="T:System.ArgumentNullException">
2824         <paramref name="array" />가 null인 경우</exception>
2825       <exception cref="T:System.ArgumentOutOfRangeException">
2826         <paramref name="arrayIndex" />가 0보다 작은 경우</exception>
2827       <exception cref="T:System.ArgumentException">
2828         <paramref name="array" />가 다차원 배열인 경우또는<paramref name="array" />에 0부터 시작하는 인덱스가 없습니다.또는소스 <see cref="T:System.Collections.ICollection" />의 요소 수가 <paramref name="arrayIndex" />에서 대상 <paramref name="array" /> 끝까지 사용 가능한 공간보다 큰 경우또는소스 <see cref="T:System.Collections.ICollection" /> 형식을 대상 <paramref name="array" /> 형식으로 자동 캐스팅할 수 없는 경우</exception>
2829     </member>
2830     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#ICollection#IsSynchronized">
2831       <summary>
2832         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지 여부를 나타내는 값을 가져옵니다.</summary>
2833       <returns>true if access to the <see cref="T:System.Collections.ICollection" /> is synchronized (thread safe); otherwise, false.<see cref="T:System.Collections.Generic.SortedList`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2834     </member>
2835     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#ICollection#SyncRoot">
2836       <summary>
2837         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
2838       <returns>
2839         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.<see cref="T:System.Collections.Generic.SortedList`2" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
2840     </member>
2841     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#Add(System.Object,System.Object)">
2842       <summary>제공된 키와 값을 가진 요소를 <see cref="T:System.Collections.IDictionary" />에 추가합니다.</summary>
2843       <param name="key">추가할 요소의 키로 사용하는 <see cref="T:System.Object" />입니다.</param>
2844       <param name="value">추가할 요소의 값으로 사용하는 <see cref="T:System.Object" />입니다.</param>
2845       <exception cref="T:System.ArgumentNullException">
2846         <paramref name="key" />가 null인 경우</exception>
2847       <exception cref="T:System.ArgumentException">
2848         <paramref name="key" /> is of a type that is not assignable to the key type <paramref name="TKey" /> of the <see cref="T:System.Collections.IDictionary" />.또는<paramref name="value" />의 형식을 <see cref="T:System.Collections.IDictionary" />의 값 형식 <paramref name="TValue" />에 할당할 수 없는 경우또는같은 키를 가진 요소가 이미 <see cref="T:System.Collections.IDictionary" />에 있는 경우</exception>
2849     </member>
2850     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#Contains(System.Object)">
2851       <summary>
2852         <see cref="T:System.Collections.IDictionary" />에 지정된 키를 가진 요소가 포함되어 있는지 여부를 확인합니다.</summary>
2853       <returns>true if the <see cref="T:System.Collections.IDictionary" /> contains an element with the key; otherwise, false.</returns>
2854       <param name="key">
2855         <see cref="T:System.Collections.IDictionary" />에서 찾을 키입니다.</param>
2856       <exception cref="T:System.ArgumentNullException">
2857         <paramref name="key" />가 null인 경우</exception>
2858     </member>
2859     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#GetEnumerator">
2860       <summary>
2861         <see cref="T:System.Collections.IDictionary" />의 <see cref="T:System.Collections.IDictionaryEnumerator" />를 반환합니다.</summary>
2862       <returns>
2863         <see cref="T:System.Collections.IDictionary" />에 대한 <see cref="T:System.Collections.IDictionaryEnumerator" />입니다.</returns>
2864     </member>
2865     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#IsFixedSize">
2866       <summary>
2867         <see cref="T:System.Collections.IDictionary" />의 크기가 고정되어 있는지 여부를 나타내는 값을 가져옵니다.</summary>
2868       <returns>true if the <see cref="T:System.Collections.IDictionary" /> has a fixed size; otherwise, false.<see cref="T:System.Collections.Generic.SortedList`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2869     </member>
2870     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#IsReadOnly">
2871       <summary>
2872         <see cref="T:System.Collections.IDictionary" />가 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
2873       <returns>true if the <see cref="T:System.Collections.IDictionary" /> is read-only; otherwise, false.<see cref="T:System.Collections.Generic.SortedList`2" />의 기본 구현에서 이 속성은 언제나 false를 반환합니다.</returns>
2874     </member>
2875     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#Item(System.Object)">
2876       <summary>지정한 키를 가진 요소를 가져오거나 설정합니다.</summary>
2877       <returns>The element with the specified key, or null if <paramref name="key" /> is not in the dictionary or <paramref name="key" /> is of a type that is not assignable to the key type <paramref name="TKey" /> of the <see cref="T:System.Collections.Generic.SortedList`2" />.</returns>
2878       <param name="key">가져오거나 설정할 요소의 키입니다.</param>
2879       <exception cref="T:System.ArgumentNullException">
2880         <paramref name="key" />가 null인 경우</exception>
2881       <exception cref="T:System.ArgumentException">A value is being assigned, and <paramref name="key" /> is of a type that is not assignable to the key type <paramref name="TKey" /> of the <see cref="T:System.Collections.Generic.SortedList`2" />.또는A value is being assigned, and <paramref name="value" /> is of a type that is not assignable to the value type <paramref name="TValue" /> of the <see cref="T:System.Collections.Generic.SortedList`2" />.</exception>
2882     </member>
2883     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#Keys">
2884       <summary>
2885         <see cref="T:System.Collections.IDictionary" />의 키를 포함하는 <see cref="T:System.Collections.ICollection" />을 가져옵니다.</summary>
2886       <returns>
2887         <see cref="T:System.Collections.IDictionary" />의 키를 포함하는 <see cref="T:System.Collections.ICollection" />입니다.</returns>
2888     </member>
2889     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#Remove(System.Object)">
2890       <summary>
2891         <see cref="T:System.Collections.IDictionary" />에서 지정한 키를 가진 요소를 제거합니다.</summary>
2892       <param name="key">제거할 요소의 키입니다.</param>
2893       <exception cref="T:System.ArgumentNullException">
2894         <paramref name="key" />가 null인 경우</exception>
2895     </member>
2896     <member name="P:System.Collections.Generic.SortedList`2.System#Collections#IDictionary#Values">
2897       <summary>
2898         <see cref="T:System.Collections.IDictionary" />의 값을 포함하는 <see cref="T:System.Collections.ICollection" />을 가져옵니다.</summary>
2899       <returns>
2900         <see cref="T:System.Collections.IDictionary" />의 값을 포함하는 <see cref="T:System.Collections.ICollection" />입니다.</returns>
2901     </member>
2902     <member name="M:System.Collections.Generic.SortedList`2.System#Collections#IEnumerable#GetEnumerator">
2903       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
2904       <returns>컬렉션을 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
2905     </member>
2906     <member name="M:System.Collections.Generic.SortedList`2.TrimExcess">
2907       <summary>
2908         <see cref="T:System.Collections.Generic.SortedList`2" />의 실제 요소 수가 현재 용량의 90% 미만인 경우 용량을 이 값으로 설정합니다.</summary>
2909     </member>
2910     <member name="M:System.Collections.Generic.SortedList`2.TryGetValue(`0,`1@)">
2911       <summary>지정한 키와 연결된 값을 가져옵니다.</summary>
2912       <returns>true if the <see cref="T:System.Collections.Generic.SortedList`2" /> contains an element with the specified key; otherwise, false.</returns>
2913       <param name="key">가져올 값이 있는 키입니다.</param>
2914       <param name="value">이 메서드가 반환될 때 지정한 키가 있으면 해당 키와 연결된 값이고, 그렇지 않으면 <paramref name="value" /> 매개 변수 형식의 기본값을 포함합니다.이 매개 변수는 초기화되지 않은 상태로 전달됩니다.</param>
2915       <exception cref="T:System.ArgumentNullException">
2916         <paramref name="key" />가 null인 경우</exception>
2917     </member>
2918     <member name="P:System.Collections.Generic.SortedList`2.Values">
2919       <summary>
2920         <see cref="T:System.Collections.Generic.SortedList`2" />의 값을 포함하는 컬렉션을 가져옵니다.</summary>
2921       <returns>
2922         <see cref="T:System.Collections.Generic.SortedList`2" />의 값을 포함하는 <see cref="T:System.Collections.Generic.IList`1" />입니다.</returns>
2923     </member>
2924     <member name="T:System.Collections.Generic.SortedSet`1">
2925       <summary>정렬된 순서대로 유지 관리되는 개체의 컬렉션을 나타냅니다.</summary>
2926       <typeparam name="T">집합에 있는 요소의 형식입니다.</typeparam>
2927     </member>
2928     <member name="M:System.Collections.Generic.SortedSet`1.#ctor">
2929       <summary>
2930         <see cref="T:System.Collections.Generic.SortedSet`1" /> 클래스의 새 인스턴스를 초기화합니다. </summary>
2931     </member>
2932     <member name="M:System.Collections.Generic.SortedSet`1.#ctor(System.Collections.Generic.IComparer{`0})">
2933       <summary>지정된 비교자를 사용하는 <see cref="T:System.Collections.Generic.SortedSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2934       <param name="comparer">개체 비교에 사용할 기본 비교자입니다. </param>
2935       <exception cref="T:System.ArgumentNullException">
2936         <paramref name="comparer" />가 null인 경우</exception>
2937     </member>
2938     <member name="M:System.Collections.Generic.SortedSet`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
2939       <summary>지정한 열거 가능한 컬렉션에서 복사된 요소를 포함하는 <see cref="T:System.Collections.Generic.SortedSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2940       <param name="collection">복사할 열거 가능한 컬렉션입니다. </param>
2941     </member>
2942     <member name="M:System.Collections.Generic.SortedSet`1.#ctor(System.Collections.Generic.IEnumerable{`0},System.Collections.Generic.IComparer{`0})">
2943       <summary>지정한 열거 가능한 컬렉션에서 복사된 요소를 포함하고 지정된 비교자를 사용하는 <see cref="T:System.Collections.Generic.SortedSet`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
2944       <param name="collection">복사할 열거 가능한 컬렉션입니다. </param>
2945       <param name="comparer">개체 비교에 사용할 기본 비교자입니다. </param>
2946       <exception cref="T:System.ArgumentNullException">
2947         <paramref name="collection" />가 null인 경우</exception>
2948     </member>
2949     <member name="M:System.Collections.Generic.SortedSet`1.Add(`0)">
2950       <summary>집합에 요소를 추가하고 성공적으로 추가되었는지 여부를 나타내는 값을 반환합니다.</summary>
2951       <returns>
2952         <paramref name="item" />이 집합에 추가되었으면 true이고, 그렇지 않으면 false입니다. </returns>
2953       <param name="item">집합에 추가할 요소입니다.</param>
2954     </member>
2955     <member name="M:System.Collections.Generic.SortedSet`1.Clear">
2956       <summary>집합에서 요소를 모두 제거합니다.</summary>
2957     </member>
2958     <member name="P:System.Collections.Generic.SortedSet`1.Comparer">
2959       <summary>
2960         <see cref="T:System.Collections.Generic.SortedSet`1" />의 값이 같은지 확인하는 데 사용되는 <see cref="T:System.Collections.Generic.IEqualityComparer`1" /> 개체를 가져옵니다.</summary>
2961       <returns>
2962         <see cref="T:System.Collections.Generic.SortedSet`1" />의 값이 같은지 확인하는 데 사용되는 비교자입니다.</returns>
2963     </member>
2964     <member name="M:System.Collections.Generic.SortedSet`1.Contains(`0)">
2965       <summary>집합에 특정 요소가 들어 있는지 여부를 확인합니다.</summary>
2966       <returns>집합에 <paramref name="item" />이 들어 있으면 true이고, 그렇지 않으면 false입니다.</returns>
2967       <param name="item">집합에서 찾을 요소입니다.</param>
2968     </member>
2969     <member name="M:System.Collections.Generic.SortedSet`1.CopyTo(`0[])">
2970       <summary>대상 배열의 처음부터 시작하여 전체 <see cref="T:System.Collections.Generic.SortedSet`1" />를 호환되는 1차원 배열에 복사합니다.</summary>
2971       <param name="array">
2972         <see cref="T:System.Collections.Generic.SortedSet`1" />에서 복사한 요소의 대상인 1차원 배열입니다.</param>
2973       <exception cref="T:System.ArgumentException">소스 <see cref="T:System.Collections.Generic.SortedSet`1" />의 요소의 수가 대상 배열이 포함할 수 있는 요소의 수를 초과하는 경우 </exception>
2974       <exception cref="T:System.ArgumentNullException">
2975         <paramref name="array" />가 null인 경우</exception>
2976     </member>
2977     <member name="M:System.Collections.Generic.SortedSet`1.CopyTo(`0[],System.Int32)">
2978       <summary>지정된 배열 인덱스에서 시작하여 전체 <see cref="T:System.Collections.Generic.SortedSet`1" />를 호환되는 1차원 배열에 복사합니다.</summary>
2979       <param name="array">
2980         <see cref="T:System.Collections.Generic.SortedSet`1" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
2981       <param name="index">
2982         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
2983       <exception cref="T:System.ArgumentException">소스 배열의 요소 수가 <paramref name="index" />에서 대상 배열 끝까지의 사용 가능한 공간보다 큰 경우</exception>
2984       <exception cref="T:System.ArgumentNullException">
2985         <paramref name="array" />가 null인 경우</exception>
2986       <exception cref="T:System.ArgumentOutOfRangeException">
2987         <paramref name="index" />가 0보다 작은 경우</exception>
2988     </member>
2989     <member name="M:System.Collections.Generic.SortedSet`1.CopyTo(`0[],System.Int32,System.Int32)">
2990       <summary>지정된 배열 인덱스에서 시작하여 <see cref="T:System.Collections.Generic.SortedSet`1" />에 있는 지정된 개수의 요소를 호환되는 1차원 배열에 복사합니다.</summary>
2991       <param name="array">
2992         <see cref="T:System.Collections.Generic.SortedSet`1" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
2993       <param name="index">
2994         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
2995       <param name="count">복사할 요소의 수입니다.</param>
2996       <exception cref="T:System.ArgumentException">소스 배열의 요소 수가 <paramref name="index" />에서 대상 배열 끝까지의 사용 가능한 공간보다 큰 경우</exception>
2997       <exception cref="T:System.ArgumentNullException">
2998         <paramref name="array" />가 null인 경우</exception>
2999       <exception cref="T:System.ArgumentOutOfRangeException">
3000         <paramref name="index" />가 0보다 작은 경우또는<paramref name="count" />가 0보다 작은 경우</exception>
3001     </member>
3002     <member name="P:System.Collections.Generic.SortedSet`1.Count">
3003       <summary>
3004         <see cref="T:System.Collections.Generic.SortedSet`1" />의 요소 수를 가져옵니다.</summary>
3005       <returns>
3006         <see cref="T:System.Collections.Generic.SortedSet`1" />의 요소 수입니다.</returns>
3007     </member>
3008     <member name="M:System.Collections.Generic.SortedSet`1.ExceptWith(System.Collections.Generic.IEnumerable{`0})">
3009       <summary>현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체에서 지정된 컬렉션에 있는 모든 요소를 제거합니다.</summary>
3010       <param name="other">
3011         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체에서 제거할 항목 컬렉션입니다.</param>
3012       <exception cref="T:System.ArgumentNullException">
3013         <paramref name="other" />가 null인 경우</exception>
3014     </member>
3015     <member name="M:System.Collections.Generic.SortedSet`1.GetEnumerator">
3016       <summary>
3017         <see cref="T:System.Collections.Generic.SortedSet`1" />을 반복하는 열거자를 반환합니다.</summary>
3018       <returns>정렬된 순서로 <see cref="T:System.Collections.Generic.SortedSet`1" />을 반복하는 열거자입니다.</returns>
3019     </member>
3020     <member name="M:System.Collections.Generic.SortedSet`1.GetViewBetween(`0,`0)">
3021       <summary>
3022         <see cref="T:System.Collections.Generic.SortedSet`1" />에 있는 하위 집합의 뷰를 반환합니다.</summary>
3023       <returns>지정된 범위의 값만 포함하는 하위 집합 뷰입니다.</returns>
3024       <param name="lowerValue">뷰에서 원하는 가장 낮은 값입니다.</param>
3025       <param name="upperValue">뷰에서 원하는 가장 높은 값입니다. </param>
3026       <exception cref="T:System.ArgumentException">비교자에 따르면 <paramref name="lowerValue" />은 <paramref name="upperValue" />보다 큽니다.</exception>
3027       <exception cref="T:System.ArgumentOutOfRangeException">뷰에서 시도한 작업이 <paramref name="lowerValue" /> 및 <paramref name="upperValue" />에 의해 지정된 범위를 벗어났습니다.</exception>
3028     </member>
3029     <member name="M:System.Collections.Generic.SortedSet`1.IntersectWith(System.Collections.Generic.IEnumerable{`0})">
3030       <summary>지정된 컬렉션에도 있는 요소만 포함되도록 현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체를 수정합니다.</summary>
3031       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3032       <exception cref="T:System.ArgumentNullException">
3033         <paramref name="other" />가 null인 경우</exception>
3034     </member>
3035     <member name="M:System.Collections.Generic.SortedSet`1.IsProperSubsetOf(System.Collections.Generic.IEnumerable{`0})">
3036       <summary>
3037         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 지정된 컬렉션의 진 부분 집합인지 확인합니다.</summary>
3038       <returns>
3039         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 <paramref name="other" />의 진 부분 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
3040       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3041       <exception cref="T:System.ArgumentNullException">
3042         <paramref name="other" />가 null인 경우</exception>
3043     </member>
3044     <member name="M:System.Collections.Generic.SortedSet`1.IsProperSupersetOf(System.Collections.Generic.IEnumerable{`0})">
3045       <summary>
3046         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 지정된 컬렉션의 진 상위 집합인지 확인합니다.</summary>
3047       <returns>
3048         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 <paramref name="other" />의 진 포함 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
3049       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다. </param>
3050       <exception cref="T:System.ArgumentNullException">
3051         <paramref name="other" />가 null인 경우</exception>
3052     </member>
3053     <member name="M:System.Collections.Generic.SortedSet`1.IsSubsetOf(System.Collections.Generic.IEnumerable{`0})">
3054       <summary>
3055         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 지정된 컬렉션의 하위 집합인지 확인합니다.</summary>
3056       <returns>현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 <paramref name="other" />의 하위 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
3057       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3058       <exception cref="T:System.ArgumentNullException">
3059         <paramref name="other" />가 null인 경우</exception>
3060     </member>
3061     <member name="M:System.Collections.Generic.SortedSet`1.IsSupersetOf(System.Collections.Generic.IEnumerable{`0})">
3062       <summary>
3063         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 지정된 컬렉션의 상위 집합인지 확인합니다.</summary>
3064       <returns>
3065         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 <paramref name="other" />의 포함 집합이면 true이고, 그렇지 않으면 false입니다.</returns>
3066       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다. </param>
3067       <exception cref="T:System.ArgumentNullException">
3068         <paramref name="other" />가 null인 경우</exception>
3069     </member>
3070     <member name="P:System.Collections.Generic.SortedSet`1.Max">
3071       <summary>비교자로 정의된 <see cref="T:System.Collections.Generic.SortedSet`1" />의 최대값을 가져옵니다.</summary>
3072       <returns>집합의 최대값입니다.</returns>
3073     </member>
3074     <member name="P:System.Collections.Generic.SortedSet`1.Min">
3075       <summary>비교자로 정의된 <see cref="T:System.Collections.Generic.SortedSet`1" />의 최소값을 가져옵니다.</summary>
3076       <returns>집합의 최소값입니다.</returns>
3077     </member>
3078     <member name="M:System.Collections.Generic.SortedSet`1.Overlaps(System.Collections.Generic.IEnumerable{`0})">
3079       <summary>현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 지정된 컬렉션이 공통 요소를 공유하는지 여부를 확인합니다.</summary>
3080       <returns>
3081         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 <paramref name="other" />가 최소한 하나의 요소를 공유하면 true이고, 그렇지 않으면 false입니다.</returns>
3082       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3083       <exception cref="T:System.ArgumentNullException">
3084         <paramref name="other" />가 null인 경우</exception>
3085     </member>
3086     <member name="M:System.Collections.Generic.SortedSet`1.Remove(`0)">
3087       <summary>
3088         <see cref="T:System.Collections.Generic.SortedSet`1" />에서 지정된 항목을 제거합니다.</summary>
3089       <returns>요소를 찾아서 성공적으로 제거했으면 true이고, 그렇지 않으면 false입니다. </returns>
3090       <param name="item">제거할 요소입니다.</param>
3091     </member>
3092     <member name="M:System.Collections.Generic.SortedSet`1.RemoveWhere(System.Predicate{`0})">
3093       <summary>
3094         <see cref="T:System.Collections.Generic.SortedSet`1" />에서 지정된 조건자로 정의된 조건과 일치하는 요소를 모두 제거합니다.</summary>
3095       <returns>
3096         <see cref="T:System.Collections.Generic.SortedSet`1" /> 컬렉션에서 제거된 요소 수입니다. </returns>
3097       <param name="match">제거할 요소의 조건을 정의하는 대리자입니다.</param>
3098       <exception cref="T:System.ArgumentNullException">
3099         <paramref name="match" />가 null인 경우</exception>
3100     </member>
3101     <member name="M:System.Collections.Generic.SortedSet`1.Reverse">
3102       <summary>
3103         <see cref="T:System.Collections.Generic.SortedSet`1" />를 역순으로 반복하는 <see cref="T:System.Collections.Generic.IEnumerable`1" />을 반환합니다.</summary>
3104       <returns>
3105         <see cref="T:System.Collections.Generic.SortedSet`1" />를 역순으로 반복하는 열거자입니다.</returns>
3106     </member>
3107     <member name="M:System.Collections.Generic.SortedSet`1.SetEquals(System.Collections.Generic.IEnumerable{`0})">
3108       <summary>현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 지정된 컬렉션에 같은 요소가 들어 있는지 여부를 확인합니다.</summary>
3109       <returns>현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체가 <paramref name="other" />와 같으면 true이고, 그렇지 않으면 false입니다.</returns>
3110       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3111       <exception cref="T:System.ArgumentNullException">
3112         <paramref name="other" />가 null인 경우</exception>
3113     </member>
3114     <member name="M:System.Collections.Generic.SortedSet`1.SymmetricExceptWith(System.Collections.Generic.IEnumerable{`0})">
3115       <summary>현재 개체나 지정된 컬렉션에 있고 둘 다에는 없는 요소만 포함되도록 현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체를 수정합니다.</summary>
3116       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3117       <exception cref="T:System.ArgumentNullException">
3118         <paramref name="other" />가 null인 경우</exception>
3119     </member>
3120     <member name="M:System.Collections.Generic.SortedSet`1.System#Collections#Generic#ICollection{T}#Add(`0)">
3121       <summary>
3122         <see cref="T:System.Collections.Generic.ICollection`1" /> 개체에 항목을 추가합니다.</summary>
3123       <param name="item">
3124         <see cref="T:System.Collections.Generic.ICollection`1" /> 개체에 추가할 개체입니다.</param>
3125       <exception cref="T:System.NotSupportedException">
3126         <see cref="T:System.Collections.Generic.ICollection`1" />가 읽기 전용인 경우</exception>
3127     </member>
3128     <member name="P:System.Collections.Generic.SortedSet`1.System#Collections#Generic#ICollection{T}#IsReadOnly">
3129       <summary>
3130         <see cref="T:System.Collections.ICollection" />이 읽기 전용인지 여부를 나타내는 값을 가져옵니다.</summary>
3131       <returns>컬렉션이 읽기 전용이면 true이고, 그렇지 않으면 false입니다.</returns>
3132     </member>
3133     <member name="M:System.Collections.Generic.SortedSet`1.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
3134       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
3135       <returns>컬렉션을 반복하는 데 사용할 수 있는 열거자입니다.</returns>
3136     </member>
3137     <member name="M:System.Collections.Generic.SortedSet`1.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
3138       <summary>지정된 배열 인덱스에서 시작하여 전체 <see cref="T:System.Collections.Generic.SortedSet`1" />를 호환되는 1차원 배열에 복사합니다.</summary>
3139       <param name="array">
3140         <see cref="T:System.Collections.Generic.SortedSet`1" />에서 복사한 요소의 대상인 1차원 배열입니다.배열에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
3141       <param name="index">
3142         <paramref name="array" />에서 복사가 시작되는 인덱스(0부터 시작)입니다.</param>
3143       <exception cref="T:System.ArgumentException">소스 배열의 요소 수가 <paramref name="index" />에서 대상 배열 끝까지의 사용 가능한 공간보다 큰 경우 </exception>
3144       <exception cref="T:System.ArgumentNullException">
3145         <paramref name="array" />가 null인 경우</exception>
3146       <exception cref="T:System.ArgumentOutOfRangeException">
3147         <paramref name="index" />가 0보다 작은 경우</exception>
3148     </member>
3149     <member name="P:System.Collections.Generic.SortedSet`1.System#Collections#ICollection#IsSynchronized">
3150       <summary>
3151         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되었는지 여부, 즉 스레드로부터 안전한지 여부를 나타내는 값을 가져옵니다.</summary>
3152       <returns>
3153         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되었으면 true이고, 그렇지 않으면 false입니다.</returns>
3154     </member>
3155     <member name="P:System.Collections.Generic.SortedSet`1.System#Collections#ICollection#SyncRoot">
3156       <summary>
3157         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
3158       <returns>
3159         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.<see cref="T:System.Collections.Generic.Dictionary`2.KeyCollection" />의 기본 구현에서 이 속성은 언제나 현재 인스턴스를 반환합니다.</returns>
3160     </member>
3161     <member name="M:System.Collections.Generic.SortedSet`1.System#Collections#IEnumerable#GetEnumerator">
3162       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
3163       <returns>컬렉션을 반복하는 데 사용할 수 있는 열거자입니다.</returns>
3164     </member>
3165     <member name="M:System.Collections.Generic.SortedSet`1.UnionWith(System.Collections.Generic.IEnumerable{`0})">
3166       <summary>현재 개체 또는 지정된 컬렉션 중 하나에 있는 요소가 모두 포함되도록 현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체를 수정합니다. </summary>
3167       <param name="other">현재 <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체와 비교할 컬렉션입니다.</param>
3168       <exception cref="T:System.ArgumentNullException">
3169         <paramref name="other" />가 null인 경우</exception>
3170     </member>
3171     <member name="T:System.Collections.Generic.SortedSet`1.Enumerator">
3172       <summary>
3173         <see cref="T:System.Collections.Generic.SortedSet`1" /> 개체의 요소를 열거합니다.</summary>
3174     </member>
3175     <member name="P:System.Collections.Generic.SortedSet`1.Enumerator.Current">
3176       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
3177       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
3178     </member>
3179     <member name="M:System.Collections.Generic.SortedSet`1.Enumerator.Dispose">
3180       <summary>
3181         <see cref="T:System.Collections.Generic.SortedSet`1.Enumerator" />에서 사용하는 모든 리소스를 해제합니다. </summary>
3182     </member>
3183     <member name="M:System.Collections.Generic.SortedSet`1.Enumerator.MoveNext">
3184       <summary>열거자를 <see cref="T:System.Collections.Generic.SortedSet`1" /> 컬렉션의 다음 요소로 이동합니다.</summary>
3185       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
3186       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
3187     </member>
3188     <member name="P:System.Collections.Generic.SortedSet`1.Enumerator.System#Collections#IEnumerator#Current">
3189       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
3190       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
3191       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
3192     </member>
3193     <member name="M:System.Collections.Generic.SortedSet`1.Enumerator.System#Collections#IEnumerator#Reset">
3194       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.</summary>
3195       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
3196     </member>
3197     <member name="T:System.Collections.Generic.Stack`1">
3198       <summary>지정한 동일 형식의 인스턴스로 이루어진 가변 크기 LIFO(후입선출) 방식의 컬렉션을 나타냅니다.</summary>
3199       <typeparam name="T">스택에 있는 요소의 형식을 지정합니다.</typeparam>
3200       <filterpriority>1</filterpriority>
3201     </member>
3202     <member name="M:System.Collections.Generic.Stack`1.#ctor">
3203       <summary>비어 있는 상태에서 기본 초기 용량을 가지는 <see cref="T:System.Collections.Generic.Stack`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
3204     </member>
3205     <member name="M:System.Collections.Generic.Stack`1.#ctor(System.Collections.Generic.IEnumerable{`0})">
3206       <summary>지정된 컬렉션에서 복사한 요소를 포함하고 복사한 요소를 모두 수용할 수 있을 정도의 용량을 가진 <see cref="T:System.Collections.Generic.Stack`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
3207       <param name="collection">요소를 복사할 원본 컬렉션입니다.</param>
3208       <exception cref="T:System.ArgumentNullException">
3209         <paramref name="collection" /> is null.</exception>
3210     </member>
3211     <member name="M:System.Collections.Generic.Stack`1.#ctor(System.Int32)">
3212       <summary>비어 있는 상태이고 지정한 초기 용량과 기본 초기 용량 중에서 더 큰 용량을 가지는 <see cref="T:System.Collections.Generic.Stack`1" /> 클래스의 새 인스턴스를 초기화합니다.</summary>
3213       <param name="capacity">
3214         <see cref="T:System.Collections.Generic.Stack`1" />에 포함될 수 있는 초기 요소 수입니다.</param>
3215       <exception cref="T:System.ArgumentOutOfRangeException">
3216         <paramref name="capacity" /> is less than zero.</exception>
3217     </member>
3218     <member name="M:System.Collections.Generic.Stack`1.Clear">
3219       <summary>
3220         <see cref="T:System.Collections.Generic.Stack`1" />에서 개체를 모두 제거합니다.</summary>
3221       <filterpriority>1</filterpriority>
3222     </member>
3223     <member name="M:System.Collections.Generic.Stack`1.Contains(`0)">
3224       <summary>요소가 <see cref="T:System.Collections.Generic.Stack`1" />에 있는지를 확인합니다.</summary>
3225       <returns>
3226         <paramref name="item" />가 <see cref="T:System.Collections.Generic.Stack`1" />에 있으면 true이고, 그렇지 않으면 false입니다.</returns>
3227       <param name="item">
3228         <see cref="T:System.Collections.Generic.Stack`1" />에서 찾을 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
3229     </member>
3230     <member name="M:System.Collections.Generic.Stack`1.CopyTo(`0[],System.Int32)">
3231       <summary>
3232         <see cref="T:System.Collections.Generic.Stack`1" />을 지정한 배열 인덱스에서 시작하여 기존의 1차원 <see cref="T:System.Array" />에 복사합니다.</summary>
3233       <param name="array">
3234         <see cref="T:System.Collections.Generic.Stack`1" />에서 복사한 요소의 대상인 1차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
3235       <param name="arrayIndex">
3236         <paramref name="array" />에서 복사가 시작되는 0부터 시작하는 인덱스입니다.</param>
3237       <exception cref="T:System.ArgumentNullException">
3238         <paramref name="array" /> is null.</exception>
3239       <exception cref="T:System.ArgumentOutOfRangeException">
3240         <paramref name="arrayIndex" /> is less than zero.</exception>
3241       <exception cref="T:System.ArgumentException">The number of elements in the source <see cref="T:System.Collections.Generic.Stack`1" /> is greater than the available space from <paramref name="arrayIndex" /> to the end of the destination <paramref name="array" />.</exception>
3242     </member>
3243     <member name="P:System.Collections.Generic.Stack`1.Count">
3244       <summary>
3245         <see cref="T:System.Collections.Generic.Stack`1" />에 포함된 요소 수를 가져옵니다.</summary>
3246       <returns>
3247         <see cref="T:System.Collections.Generic.Stack`1" />에 포함된 요소 수입니다.</returns>
3248     </member>
3249     <member name="M:System.Collections.Generic.Stack`1.GetEnumerator">
3250       <summary>
3251         <see cref="T:System.Collections.Generic.Stack`1" />에 대한 열거자를 반환합니다.</summary>
3252       <returns>
3253         <see cref="T:System.Collections.Generic.Stack`1" />에 대한 <see cref="T:System.Collections.Generic.Stack`1.Enumerator" />입니다.</returns>
3254     </member>
3255     <member name="M:System.Collections.Generic.Stack`1.Peek">
3256       <summary>
3257         <see cref="T:System.Collections.Generic.Stack`1" />의 맨 위에서 개체를 제거하지 않고 반환합니다.</summary>
3258       <returns>
3259         <see cref="T:System.Collections.Generic.Stack`1" />의 맨 위에 있는 개체입니다.</returns>
3260       <exception cref="T:System.InvalidOperationException">The <see cref="T:System.Collections.Generic.Stack`1" /> is empty.</exception>
3261     </member>
3262     <member name="M:System.Collections.Generic.Stack`1.Pop">
3263       <summary>
3264         <see cref="T:System.Collections.Generic.Stack`1" />의 맨 위에서 개체를 제거하고 반환합니다.</summary>
3265       <returns>
3266         <see cref="T:System.Collections.Generic.Stack`1" />의 맨 위에서 제거되는 개체입니다.</returns>
3267       <exception cref="T:System.InvalidOperationException">The <see cref="T:System.Collections.Generic.Stack`1" /> is empty.</exception>
3268     </member>
3269     <member name="M:System.Collections.Generic.Stack`1.Push(`0)">
3270       <summary>개체를 <see cref="T:System.Collections.Generic.Stack`1" />의 맨 위에 삽입합니다.</summary>
3271       <param name="item">
3272         <see cref="T:System.Collections.Generic.Stack`1" />에 적용할 개체입니다.참조 형식에 대해 값은 null이 될 수 있습니다.</param>
3273     </member>
3274     <member name="M:System.Collections.Generic.Stack`1.System#Collections#Generic#IEnumerable{T}#GetEnumerator">
3275       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
3276       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.Generic.IEnumerator`1" />입니다.</returns>
3277     </member>
3278     <member name="M:System.Collections.Generic.Stack`1.System#Collections#ICollection#CopyTo(System.Array,System.Int32)">
3279       <summary>특정 <see cref="T:System.Array" /> 인덱스부터 시작하여 <see cref="T:System.Collections.ICollection" />의 요소를 <see cref="T:System.Array" />에 복사합니다.</summary>
3280       <param name="array">
3281         <see cref="T:System.Collections.ICollection" />에서 복사한 요소의 대상인 1차원 <see cref="T:System.Array" />입니다.<see cref="T:System.Array" />에는 0부터 시작하는 인덱스가 있어야 합니다.</param>
3282       <param name="arrayIndex">
3283         <paramref name="array" />에서 복사가 시작되는 0부터 시작하는 인덱스입니다.</param>
3284       <exception cref="T:System.ArgumentNullException">
3285         <paramref name="array" /> is null.</exception>
3286       <exception cref="T:System.ArgumentOutOfRangeException">
3287         <paramref name="arrayIndex" /> is less than zero.</exception>
3288       <exception cref="T:System.ArgumentException">
3289         <paramref name="array" /> is multidimensional.-or-<paramref name="array" /> does not have zero-based indexing.-or-The number of elements in the source <see cref="T:System.Collections.ICollection" /> is greater than the available space from <paramref name="arrayIndex" /> to the end of the destination <paramref name="array" />.-or-The type of the source <see cref="T:System.Collections.ICollection" /> cannot be cast automatically to the type of the destination <paramref name="array" />.</exception>
3290     </member>
3291     <member name="P:System.Collections.Generic.Stack`1.System#Collections#ICollection#IsSynchronized">
3292       <summary>
3293         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되는지를 나타내는 값을 가져옵니다.</summary>
3294       <returns>
3295         <see cref="T:System.Collections.ICollection" />에 대한 액세스가 동기화되어 스레드로부터 안전하게 보호되면 true이고, 그렇지 않으면 false입니다.<see cref="T:System.Collections.Generic.Stack`1" />의 기본 구현에서 이 속성은 항상 false를 반환합니다.</returns>
3296     </member>
3297     <member name="P:System.Collections.Generic.Stack`1.System#Collections#ICollection#SyncRoot">
3298       <summary>
3299         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체를 가져옵니다.</summary>
3300       <returns>
3301         <see cref="T:System.Collections.ICollection" />에 대한 액세스를 동기화하는 데 사용할 수 있는 개체입니다.<see cref="T:System.Collections.Generic.Stack`1" />의 기본 구현에서 이 속성은 항상 현재 인스턴스를 반환합니다.</returns>
3302     </member>
3303     <member name="M:System.Collections.Generic.Stack`1.System#Collections#IEnumerable#GetEnumerator">
3304       <summary>컬렉션을 반복하는 열거자를 반환합니다.</summary>
3305       <returns>컬렉션에서 반복하는 데 사용할 수 있는 <see cref="T:System.Collections.IEnumerator" />입니다.</returns>
3306     </member>
3307     <member name="M:System.Collections.Generic.Stack`1.ToArray">
3308       <summary>
3309         <see cref="T:System.Collections.Generic.Stack`1" />을 새 배열에 복사합니다.</summary>
3310       <returns>
3311         <see cref="T:System.Collections.Generic.Stack`1" />의 요소 복사본을 포함하는 새 배열입니다.</returns>
3312     </member>
3313     <member name="M:System.Collections.Generic.Stack`1.TrimExcess">
3314       <summary>
3315         <see cref="T:System.Collections.Generic.Stack`1" />의 실제 요소 수가 현재 용량의 90% 미만인 경우 용량을 이 값으로 설정합니다.</summary>
3316     </member>
3317     <member name="T:System.Collections.Generic.Stack`1.Enumerator">
3318       <summary>
3319         <see cref="T:System.Collections.Generic.Stack`1" />의 요소를 열거합니다.</summary>
3320     </member>
3321     <member name="P:System.Collections.Generic.Stack`1.Enumerator.Current">
3322       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
3323       <returns>
3324         <see cref="T:System.Collections.Generic.Stack`1" />에서 열거자의 현재 위치에 있는 요소입니다.</returns>
3325       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
3326     </member>
3327     <member name="M:System.Collections.Generic.Stack`1.Enumerator.Dispose">
3328       <summary>
3329         <see cref="T:System.Collections.Generic.Stack`1.Enumerator" />에서 사용하는 모든 리소스를 해제합니다.</summary>
3330     </member>
3331     <member name="M:System.Collections.Generic.Stack`1.Enumerator.MoveNext">
3332       <summary>열거자를 <see cref="T:System.Collections.Generic.Stack`1" />의 다음 요소로 이동합니다.</summary>
3333       <returns>열거자가 다음 요소로 이동한 경우 true가 반환되고, 컬렉션의 끝을 지난 경우 false가 반환됩니다.</returns>
3334       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
3335     </member>
3336     <member name="P:System.Collections.Generic.Stack`1.Enumerator.System#Collections#IEnumerator#Current">
3337       <summary>열거자의 현재 위치에 있는 요소를 가져옵니다.</summary>
3338       <returns>컬렉션에서 열거자의 현재 위치에 있는 요소입니다.</returns>
3339       <exception cref="T:System.InvalidOperationException">열거자가 컬렉션의 첫 번째 요소 앞 또는 마지막 요소 뒤에 배치되는 경우 </exception>
3340     </member>
3341     <member name="M:System.Collections.Generic.Stack`1.Enumerator.System#Collections#IEnumerator#Reset">
3342       <summary>컬렉션의 첫 번째 요소 앞의 초기 위치에 열거자를 설정합니다.이 클래스는 상속될 수 없습니다.</summary>
3343       <exception cref="T:System.InvalidOperationException">열거자가 만들어진 후 컬렉션이 수정된 경우 </exception>
3344     </member>
3345   </members>
3346 </doc>