1 /* Disassemble V850 instructions.
2 Copyright (C) 1996 Free Software Foundation, Inc.
4 This program is free software; you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation; either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program; if not, write to the Free Software
16 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
22 #include "opcode/v850.h"
25 static const char *const v850_reg_names[] =
26 { "r0", "r1", "r2", "sp", "gp", "r5", "r6", "r7",
27 "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
28 "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
29 "r24", "r25", "r26", "r27", "r28", "r29", "ep", "lp" };
31 static const char *const v850_sreg_names[] =
32 { "eipc", "eipsw", "fepc", "fepsw", "ecr", "psw", "sr6", "sr7",
33 "sr8", "sr9", "sr10", "sr11", "sr12", "sr13", "sr14", "sr15",
34 "sr16", "sr17", "sr18", "sr19", "sr20", "sr21", "sr22", "sr23",
35 "sr24", "sr25", "sr26", "sr27", "sr28", "sr29", "sr30", "sr31" };
37 static const char *const v850_cc_names[] =
38 { "v", "c/l", "z", "nh", "s/n", "t", "lt", "le",
39 "nv", "nc/nl", "nz", "h", "ns/p", "sa", "ge", "gt" };
42 disassemble (memaddr, info, insn)
44 struct disassemble_info *info;
47 struct v850_opcode * op = (struct v850_opcode *)v850_opcodes;
48 const struct v850_operand * operand;
50 int short_op = ((insn & 0x0600) != 0x0600);
54 /* start-sanitize-v850e */
55 /* Special case: 32 bit MOV */
56 if ((insn & 0xffe0) == 0x0620)
58 /* end-sanitize-v850e */
60 bytes_read = short_op ? 2 : 4;
62 /* If this is a two byte insn, then mask off the high bits. */
70 target_processor = PROCESSOR_V850;
73 /* start-sanitize-v850e */
75 target_processor = PROCESSOR_V850E;
79 target_processor = PROCESSOR_V850EQ;
81 /* end-sanitize-v850e */
84 /* Find the opcode. */
87 if ((op->mask & insn) == op->opcode
88 && (op->processors & target_processor))
90 const unsigned char * opindex_ptr;
95 (*info->fprintf_func) (info->stream, "%s\t", op->name);
96 //fprintf (stderr, "match: mask: %x insn: %x, opcode: %x, name: %s\n", op->mask, insn, op->opcode, op->name );
99 /* Now print the operands.
101 MEMOP is the operand number at which a memory
102 address specification starts, or zero if this
103 instruction has no memory addresses.
105 A memory address is always two arguments.
107 This information allows us to determine when to
108 insert commas into the output stream as well as
109 when to insert disp[reg] expressions onto the
112 for (opindex_ptr = op->operands, opnum = 1;
114 opindex_ptr++, opnum++)
119 bfd_byte buffer[ 4 ];
121 operand = &v850_operands[*opindex_ptr];
123 if (operand->extract)
124 value = (operand->extract) (insn, 0);
127 if (operand->bits == -1)
128 value = (insn & operand->shift);
130 value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
132 if (operand->flags & V850_OPERAND_SIGNED)
133 value = ((long)(value << (32 - operand->bits))
134 >> (32 - operand->bits));
137 /* The first operand is always output without any
140 For the following arguments:
142 If memop && opnum == memop + 1, then we need '[' since
143 we're about to output the register used in a memory
146 If memop && opnum == memop + 2, then we need ']' since
147 we just finished the register in a memory reference. We
148 also need a ',' before this operand.
150 Else we just need a comma.
152 We may need to output a trailing ']' if the last operand
153 in an instruction is the register for a memory address.
155 The exception (and there's always an exception) is the
156 "jmp" insn which needs square brackets around it's only
157 register argument. */
159 if (memop && opnum == memop + 1) info->fprintf_func (info->stream, "[");
160 else if (memop && opnum == memop + 2) info->fprintf_func (info->stream, "],");
161 else if (memop == 1 && opnum == 1
162 && (operand->flags & V850_OPERAND_REG))
163 info->fprintf_func (info->stream, "[");
164 else if (opnum > 1) info->fprintf_func (info->stream, ", ");
166 /* extract the flags, ignorng ones which do not effect disassembly output. */
167 flag = operand->flags;
168 flag &= ~ V850_OPERAND_SIGNED;
169 flag &= ~ V850_OPERAND_RELAX;
174 case V850_OPERAND_REG: info->fprintf_func (info->stream, "%s", v850_reg_names[value]); break;
175 case V850_OPERAND_SRG: info->fprintf_func (info->stream, "%s", v850_sreg_names[value]); break;
176 case V850_OPERAND_CC: info->fprintf_func (info->stream, "%s", v850_cc_names[value]); break;
177 case V850_OPERAND_EP: info->fprintf_func (info->stream, "ep"); break;
178 case V850_OPERAND_DISP: info->print_address_func (value + memaddr, info); break;
179 default: info->fprintf_func (info->stream, "%d", value); break;
180 /* start-sanitize-v850e */
183 static int list12_regs[32] = { 30, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 31, 29, 28, 23, 22, 21, 20, 27, 26, 25, 24 };
184 static int list18_h_regs[32] = { 19, 18, 17, 16, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, 30, 31, 29, 28, 23, 22, 21, 20, 27, 26, 25, 24 };
185 static int list18_l_regs[32] = { 3, 2, 1, -2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, 14, 15, 13, 12, 7, 6, 5, 4, 11, 10, 9, 8 };
188 unsigned long int mask = 0;
193 switch (operand->shift)
195 case 0xffe00001: regs = list12_regs; break;
196 case 0xfff8000f: regs = list18_h_regs; break;
197 case 0xfff8001f: regs = list18_l_regs; value &= ~0x10; break; /* Do not include magic bit */
199 fprintf (stderr, "unknown operand shift: %x\n", operand->shift );
203 for (i = 0; i < 32; i++)
205 if (value & (1 << i))
209 default: mask |= (1 << regs[ i ]); break;
210 case 0: fprintf (stderr, "unknown pop reg: %d\n", i ); abort();
211 case -1: pc = true; break;
212 case -2: sr = true; break;
217 info->fprintf_func (info->stream, "{");
219 if (mask || pc || sr)
224 int shown_one = false;
226 for (bit = 0; bit < 32; bit++)
227 if (mask & (1 << bit))
229 unsigned long int first = bit;
230 unsigned long int last;
233 info->fprintf_func (info->stream, ", ");
237 info->fprintf_func (info->stream, v850_reg_names[first]);
239 for (bit++; bit < 32; bit++)
240 if ((mask & (1 << bit)) == 0)
245 if (last > first + 1)
247 info->fprintf_func (info->stream, " - %s", v850_reg_names[ last - 1 ]);
253 info->fprintf_func (info->stream, "%sPC", mask ? ", " : "");
255 info->fprintf_func (info->stream, "%sSR", (mask || pc) ? ", " : "");
258 info->fprintf_func (info->stream, "}");
262 case V850E_IMMEDIATE16:
263 status = info->read_memory_func (memaddr + bytes_read, buffer, 2, info);
267 value = bfd_getl16 (buffer);
269 /* If this is a DISPOSE instruction with ff set to 0x10, then shift value up by 16. */
270 if ((insn & 0x001fffc0) == 0x00130780)
273 info->fprintf_func (info->stream, "0x%x", value);
277 info->memory_error_func (status, memaddr + bytes_read, info);
281 case V850E_IMMEDIATE32:
282 status = info->read_memory_func (memaddr + bytes_read, buffer, 4, info);
286 value = bfd_getl32 (buffer);
287 info->fprintf_func (info->stream, "0x%lx", value);
291 info->memory_error_func (status, memaddr + bytes_read, info);
294 /* end-sanitize-v850e */
297 /* Handle jmp correctly. */
298 if (memop == 1 && opnum == 1
299 && ((operand->flags & V850_OPERAND_REG) != 0))
300 (*info->fprintf_func) (info->stream, "]");
303 /* Close any square bracket we left open. */
304 if (memop && opnum == memop + 2)
305 (*info->fprintf_func) (info->stream, "]");
316 info->fprintf_func (info->stream, ".short\t0x%04x", insn);
318 info->fprintf_func (info->stream, ".long\t0x%08x", insn);
325 print_insn_v850 (memaddr, info)
327 struct disassemble_info * info;
330 bfd_byte buffer[ 4 ];
333 /* First figure out how big the opcode is. */
335 status = info->read_memory_func (memaddr, buffer, 2, info);
338 insn = bfd_getl16 (buffer);
340 if ( (insn & 0x0600) == 0x0600
341 && (insn & 0xffe0) != 0x0620)
343 /* If this is a 4 byte insn, read 4 bytes of stuff. */
344 status = info->read_memory_func (memaddr, buffer, 4, info);
347 insn = bfd_getl32 (buffer);
353 info->memory_error_func (status, memaddr, info);
357 /* Make sure we tell our caller how many bytes we consumed. */
358 return disassemble (memaddr, info, insn);