1 2002-06-18 Dave Brolley <brolley@redhat.com>
3 * po/POTFILES.in: Add frv-*.[ch].
4 * disassemble.c (ARCH_frv): New macro.
5 (disassembler): Handle bfd_arch_frv.
6 * configure.in: Support frv_bfd_arch.
7 * Makefile.am (HFILES): Add frv-*.h.
9 (ALL_MACHINES): Add frv-*.lo.
10 (CLEANFILES): Add stamp-frv.
11 (FRV_DEPS): New variable.
12 (stamp-frv): New target.
13 (frv-asm.lo): New target.
14 (frv-desc.lo): New target.
15 (frv-dis.lo): New target.
16 (frv-ibld.lo): New target.
17 (frv-opc.lo): New target.
18 (frv-*.[ch]): New files.
20 2002-06-18 Ben Elliston <bje@redhat.com>
22 * Makefile.am (CGENDEPS): Remove unnecessary stamp-cgen.
23 * Makefile.in: Regenerate.
25 2002-06-08 Alan Modra <amodra@bigpond.net.au>
27 * a29k-dis.c: Replace CONST with const.
28 * h8300-dis.c: Likewise.
29 * m68k-dis.c: Likewise.
30 * or32-dis.c: Likewise.
31 * sparc-dis.c: Likewise.
33 2002-06-04 Jason Thorpe <thorpej@wasabisystems.com>
35 * configure.in: Add "sh5*-*" to list of targets which include
37 * configure: Regenerate.
39 2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
41 * mips-opc.c: Clean up a few whitespace issues, and sort a
42 few entries understanding that 'x' follows 'w' in the alphabet.
44 2002-05-31 Chris G. Demetriou <cgd@broadcom.com>
45 Ed Satterthwaite <ehs@broadcom.com>
47 * mips-opc.c: Add support for SB-1 MDMX subset and extensions.
49 2002-05-31 Alan Modra <amodra@bigpond.net.au>
51 * Makefile.am: Run "make dep-am".
52 * Makefile.in: Regenerate.
53 * po/POTFILES.in: Regenerate.
55 2002-05-30 Chris G. Demetriou <cgd@broadcom.com>
56 Ed Satterthwaite <ehs@broadcom.com>
58 * mips-dis.c (print_insn_arg): Add support for 'O', 'Q', 'X', 'Y',
59 and 'Z' formats, for MDMX.
60 (mips_isa_type): Add MDMX instructions to the ISA
61 bit mask for bfd_mach_mipsisa64.
62 * mips-opc.c: Add support for MDMX instructions.
65 * mips-dis.c: Update copyright years to include 2002.
67 2002-05-30 Diego Novillo <dnovillo@redhat.com>
69 * d10v-opc.c (d10v_opcodes): `btsti' does not modify its
72 2002-05-28 Kuang Hwa Lin <kuang@sbcglobal.net>
74 * configure.in: Add DLX configuraton support.
75 * configure: Regenerate.
76 * Makefile.am: Add DLX configuraton support.
77 * Makefile.in: Regenerate.
78 * disassemble.c: Add DLX support.
79 * dlx-dis.c: New file.
81 2002-05-25 Alan Modra <amodra@bigpond.net.au>
83 * Makefile.am (sh-dis.lo): Don't put make commands in deps.
84 * Makefile.in: Regenerate.
85 * arc-dis.c: Use #include "" instead of <> for local header files.
86 * m68k-dis.c: Likewise.
88 Wed May 22 20:11:51 2002 J"orn Rennecke <joern.rennecke@superh.com>
90 * Makefile.am (sh-dis.lo): Compile with @archdefs@.
91 * Makefile.in: regenerate.
93 * sh-dis.c (print_insn_sh): If coff and bfd_mach_sh, use arch_sh4
96 2002-05-22 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
98 * mips-opc.c (mips_builtin_opcodes): Add drol, dror macros.
100 Fri May 17 14:26:44 2002 J"orn Rennecke <joern.rennecke@superh.com>
102 * disassemble.c (disassembler): Just use print_insn_sh for bfd_arch_sh.
103 * sh-dis.c (LITTLE_BIT): Delete.
104 (print_insn_sh, print_insn_shl): Deleted.
105 (print_insn_shx): Renamed to
106 (print_insn_sh). No longer static. Handle SHmedia instructions.
107 Use info->endian to determine endianness.
108 * sh64-dis.c (print_insn_sh64, print_insn_sh64l): Delete.
109 (print_insn_sh64x): No longer static. Renamed to
110 (print_insn_sh64). Removed pfun_compact and endian arguments.
111 If we got an uneven address to indicate SHmedia, adjust it.
112 Return -2 for SHcompact instructions.
114 2002-05-17 Alan Modra <amodra@bigpond.net.au>
116 * acinclude.m4 (AM_INSTALL_LIBBFD): Fake to fool autotools.
117 * configure.in: Invoke AM_INSTALL_LIBBFD.
118 * Makefile.am (install-data-local): Move to..
119 (install_libopcodes): .. New target.
120 (uninstall_libopcodes): Likewise.
121 (install-bfdlibLTLIBRARIES): Likewise.
122 (uninstall-bfdlibLTLIBRARIES): Likewise.
124 (bfdincludedir): New.
125 (lib_LTLIBRARIES): Rename to bfdlib_LTLIBRARIES.
126 * aclocal.m4: Regenerate.
127 * configure: Regenerate.
128 * Makefile.in: Regenerate.
130 2002-05-15 Nick Clifton <nickc@cambridge.redhat.com>
132 * fr30-asm.c: Regenerate.
133 * fr30-desc.c: Regenerate.
134 * fr30-dis.c: Regenerate.
135 * m32r-asm.c: Regenerate.
136 * m32r-desc.c: Regenerate.
137 * m32r-dis.c: Regenerate.
138 * openrisc-asm.c: Regenerate.
139 * openrisc-desc.c: Regenerate.
140 * openrisc-dis.c: Regenerate.
141 * xstormy16-asm.c: Regenerate.
142 * xstormy16-desc.c: Regenerate.
143 * xstormy16-dis.c: Regenerate.
145 2002-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
147 * mips-dis.c (is_newabi): EABI is not a NewABI.
149 2002-05-13 Jason Thorpe <thorpej@wasabisystems.com>
151 * configure.in (shle-*-*elf*): Include sh64 support.
152 * configure: Regenerate.
154 2002-04-28 Jason Thorpe <thorpej@wasabisystems.com>
156 * vax-dis.c (print_insn_arg): Pass the insn info to print_insn_mode.
157 (print_insn_mode): Print some basic info about floating point values.
159 2002-05-09 Anton Blanchard <anton@samba.org>
161 * ppc-opc.c: Add "tlbiel" for POWER4.
163 2002-05-07 Graydon Hoare <graydon@redhat.com>
165 * cgen-dis.in: (print_insn_@arch@): Cache list of opened CPUs rather
166 than just most-recently-opened.
168 2002-05-01 Alan Modra <amodra@bigpond.net.au>
170 * ppc-opc.c: Add "tlbsx." and "tlbsxe." for booke.
172 2002-04-24 Christian Groessler <chris@groessler.org>
174 * z8k-dis.c (print_insn_z8k): Set disassemble_info to 2
175 bytes_per_chunk, 6 bytes_per_line for nicer display of the hex
177 (z8k_lookup_instr): CLASS_IGNORE case added.
178 (output_instr): Don't print hex codes, they are already
180 (unpack_instr): ARG_NIM4 case added. ARG_NIM8 case
181 fixed. Support CLASS_BIT_1OR2 and CLASS_IGNORE cases.
182 (unparse_instr): Fix base and indexed addressing disassembly:
183 The index is inside the brackets.
184 * z8kgen.c (gas): Add ARG_NIM4 and CLASS_IGNORE defines.
185 (opt): Fix shift left/right arithmetic/logical byte defines:
186 The high byte of the immediate word is ignored by the
188 Fix n parameter of ldm opcodes: The opcode contains (n-1).
189 (args): Fix "n" entry.
190 (toks): Add "nim4" and "iiii" entries.
191 * z8k-opc.h: Regenerated with new z8kgen.c.
193 2002-04-24 Nick Clifton <nickc@cambridge.redhat.com>
195 * po/id.po: New Indonesian translation.
196 * configure.in (ALL_LIGUAS): Add id.po
197 * configure: Regenerate.
199 2002-04-17 matthew green <mrg@redhat.com>
201 * ppc-opc.c (powerpc_opcode): Fix dssall operand list.
203 2002-04-04 Alan Modra <amodra@bigpond.net.au>
205 * dep-in.sed: Cope with absolute paths.
206 * Makefile.am (dep.sed): Subst TOPDIR.
208 * Makefile.in: Regenerate.
209 * ppc-opc.c: Whitespace.
210 * s390-dis.c: Fix copyright date.
212 2002-03-23 matthew green <mrg@redhat.com>
214 * ppc-opc.c (vmaddfp): Fix operand order.
216 2002-03-21 Alan Modra <amodra@bigpond.net.au>
218 * Makefile.am: Run "make dep-am".
219 * Makefile.in: Regenerate.
221 2002-03-21 Anton Blanchard <anton@samba.org>
223 * ppc-opc.c: Add optional field to mtmsrd.
224 (MTMSRD_L, XRLARB_MASK): Define.
226 Mon Mar 18 21:10:43 CET 2002 Jan Hubicka <jh@suse.cz>
228 * i386-dis.c (prefix_name): Fix handling of 32bit address prefix
230 (print_insn) Likewise.
231 (putop): Fix handling of 'E'
232 (OP_E, OP_OFF): handle 32bit addressing mode in 64bit.
235 2002-03-18 Nick Clifton <nickc@cambridge.redhat.com>
237 * po/fr.po: Updated version.
239 2002-03-16 Chris Demetriou <cgd@broadcom.com>
241 * mips-opc.c (M3D): Tweak comment.
242 (mips_builtin_op): Add comment indicating that opcodes of the
243 same name must be placed together in the table, and sort
244 the "recip.fmt", "recip1.fmt", "recip2.fmt", "rsqrt.fmt",
245 "rsqrt1.fmt", and "rsqrt2.fmt" opcodes by name.
247 2002-03-16 Nick Clifton <nickc@cambridge.redhat.com>
249 * Makefile.am: Tidy up sh64 rules.
250 * Makefile.in: Regenerate.
252 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
254 * mips-dis.c: Update copyright years.
256 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
258 * mips-dis.c (mips_isa_type): Add MIPS3D instructions to the ISA
259 bit masks for bfd_mach_mips_sb1 and bfd_mach_mipsisa64. Add
260 comments for bfd_mach_mipsisa32 and bfd_mach_mipsisa64 that
261 indicate that they should dissassemble all applicable
263 * mips-opc.c: Add support for MIPS-3D instructions.
264 (M3D): New definition.
266 * mips-opc.c: Update copyright years.
268 2002-03-15 Chris G. Demetriou <cgd@broadcom.com>
270 * mips-opc.c (mips_builtin_opcodes): Sort bc<N> opcodes by name.
272 2002-03-15 Chris Demetriou <cgd@broadcom.com>
274 * mips-dis.c (is_newabi): Fix ABI decoding.
276 2002-03-14 Chris G. Demetriou <cgd@broadcom.com>
278 * mips-dis.c (mips_isa_type): Fix formatting of bfd_mach_mipsisa32
279 and bfd_mach_mipsisa64 cases to match the rest.
281 2002-03-13 Nick Clifton <nickc@cambridge.redhat.com>
283 * po/fr.po: Updated version.
285 2002-03-13 Alan Modra <amodra@bigpond.net.au>
287 * ppc-opc.c: Add optional `L' field to tlbie.
288 (XRTLRA_MASK): Define.
290 2002-03-06 Chris Demetriou <cgd@broadcom.com>
292 * mips-opc.c (mips_builtin_opcodes): Mark "pref" as being
295 * mips-opc.c (mips_builtin_opcodes): Add "movn.ps" and "movz.ps".
297 2002-03-05 Paul Koning <pkoning@equallogic.com>
299 * pdp11-opc.c: Fix "mark" operand type. Fix operand types
300 for float opcodes that take float operands. Add alternate
301 names (xxxD vs. xxxF) for float opcodes.
302 * pdp11-dis.c (print_operand): Clean up formatting for mode 67.
303 (print_foperand): New function to handle float opcode operands.
304 (print_insn_pdp11): Use print_foperand to disassemble float ops.
306 2002-02-27 Nick Clifton <nickc@cambridge.redhat.com>
310 2002-02-26 Brian Gaeke <brg@dgate.org>
312 * Makefile.am (install-data-local): Install dis-asm.h.
314 2002-02-26 Nick Clifton <nickc@cambridge.redhat.com>
316 * configure.in (LINGUAS): Add de.po.
317 * configure: Regenerate.
318 * po/de.po: New file.
320 2002-02-25 Alan Modra <amodra@bigpond.net.au>
322 * ppc-dis.c (powerpc_dialect): Handle power4 option.
323 * ppc-opc.c (insert_bdm): Correct description of "at" branch
324 hints. Test PPC_OPCODE_POWER4 to determine branch hint flavour.
325 (extract_bdm, insert_bdp, extract_bdp, valid_bo): Likewise.
326 (BOFM64, BOFP64, BOTM64, BOFP64): Rename to BOFM4, BOFP4 etc.
327 (BODNZM64, BODNZP64, BODZM64, BODZP64): Likewise.
328 (PPCCOM32, PPCCOM64): Delete.
329 (NOPOWER4, POWER4): Define.
330 (powerpc_opcodes): Replace occurences of PPCCOM32 with NOPOWER4,
331 and PPCCOM4 with POWER4 so that "at" style branch hint opcodes
332 are enabled for power4 rather than ppc64.
334 2002-02-20 Tom Rix <trix@redhat.com>
336 * ppc-opc.c (powerpc_operands): Add WS field. Use for tlbre, tlbwe.
338 2002-02-19 Martin Schwidefsky <schwidefsky@de.ibm.com>
340 * s390-dis.c (init_disasm): Use renamed architecture defines.
342 2002-02-19 matthew green <mrg@redhat.com>
344 * ppc-opc.c (powerpc_dialect): Fix comment; BookE is not Motorola
347 2002-02-18 Nick Clifton <nickc@cambridge.redhat.com>
349 * po/tr.po: Updated translation.
351 2002-02-15 Richard Henderson <rth@redhat.com>
353 * alpha-opc.c (alpha_opcodes): Fix thinko in ret pseudo
356 2002-02-15 Richard Henderson <rth@redhat.com>
358 * alpha-opc.c (alpha_opcodes): Add simple pseudos for
361 2002-02-14 Nick Clifton <nickc@cambridge.redhat.com>
363 * po/da.po: Updated translation.
365 2002-02-12 Graydon Hoare <graydon@redhat.com>
367 * cgen-asm.in (parse_insn_normal): Change call from
368 @arch@_cgen_parse_operand to cd->parse_operand, to
369 facilitate CGEN_ASM_INIT_HOOK doing useful work.
371 2002-02-11 Alexandre Oliva <aoliva@redhat.com>
373 * sparc-dis.c (print_insn_sparc): Make sure 0xFFFFFFFF is not
376 2002-02-11 Alan Modra <amodra@bigpond.net.au>
378 * Makefile.am: "make dep-am".
379 * Makefile.in: Regenerate.
380 * aclocal.m4: Regenerate.
381 * config.in: Regenerate.
382 * configure: Regenerate.
384 2002-02-10 Hans-Peter Nilsson <hp@bitrange.com>
386 * configure.in <bfd_sh_arc>: For sh-* and shl-*, enable sh64
387 support only for sh-*-*elf*, shl-*-*elf*, sh-*-linux* and
389 * configure: Regenerate.
391 2002-02-10 Daniel Jacobowitz <drow@mvista.com>
393 * cgen-dis.c: Add prototypes for count_decodable_bits
394 and add_insn_to_hash_chain.
396 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
398 * configure.in <bfd_sh_arc>: Enable sh64 support on sh-*.
399 * configure: Rebuilt.
401 2002-02-08 Ivan Guzvinec <ivang@opencores.org>
403 * or32-opc.c: Fix compile time warning messages.
404 * or32-dis.c: Fix compile time warning messages.
406 2002-02-08 Alexandre Oliva <aoliva@redhat.com>
409 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
410 * sh64-opc.c: Regenerate.
411 2001-03-13 DJ Delorie <dj@redhat.com>
412 * sh64-opc.h: Rename A_RESV_Fx to A_REUSE_PREV so that its
413 purpose is more obvious.
414 * sh64-opc.c (shmedia_table): Ditto.
415 * sh64-dis.c (initialize_shmedia_opcode_mask_table): Ditto.
416 (print_insn_shmedia): Ditto.
417 2001-03-12 DJ Delorie <dj@redhat.com>
418 * sh64-opc.c: Adjust comments to reflect reality: replace bits
419 3:0 with zeros (not "reserved"), replace "rrrrrr" with
420 "gggggg" for two-operand floating point opcodes. Remove
422 2001-01-08 Hans-Peter Nilsson <hpn@cygnus.com>
423 * sh64-dis.c (print_insn_shmedia) <failing read_memory_func>:
424 Correct printing of .byte:s. Return number of printed bytes or
426 (print_insn_sh64x) <not CRT_SH5_ISA16>: Ditto. Print as .byte:s
427 to next four-byte-alignment if insn or data is not aligned.
428 2001-01-06 Hans-Peter Nilsson <hpn@cygnus.com>
429 * sh64-dis.c: Update comments and fix comment formatting.
430 (initialize_shmedia_opcode_mask_table) <case A_IMMM>:
431 Abort instead of setting length to 0.
432 (crange_qsort_cmpb, crange_qsort_cmpl, crange_bsearch_cmpb,
433 crange_bsearch_cmpl, sh64_get_contents_type,
434 sh64_address_in_cranges): Move to bfd/elf32-sh64.c.
435 2001-01-05 Hans-Peter Nilsson <hpn@cygnus.com>
436 * sh64-opc.c: Remove #if 0:d entries for instructions not found in
437 SH-5/ST50-023-04: fcosa.s, fsrra.s and prefo.
438 2000-12-30 Hans-Peter Nilsson <hpn@cygnus.com>
439 * sh64-dis.c (print_insn_shmedia): Display MOVI/SHORI-formed
440 address with same prefix as SHcompact.
441 In the disassembler, use a .cranges section for linked executables.
442 * sh64-dis.c (SAVED_MOVI_R, SAVED_MOVI_IMM): Move to head of file
443 and update for using structure in info->private_data.
444 (struct sh64_disassemble_info): New.
445 (is_shmedia_p): Delete.
446 (crange_qsort_cmpb): New function.
447 (crange_qsort_cmpl, crange_bsearch_cmpb): New functions.
448 (crange_bsearch_cmpl, sh64_address_in_cranges): New functions.
449 (init_sh64_disasm_info, sh64_get_contents_type_disasm): New functions.
450 (sh64_get_contents_type, sh64_address_is_shmedia): New functions.
451 (print_insn_shmedia): Correct displaying of address after MOVI/SHORI
452 pair. Display addresses for linked executables only.
453 (print_insn_sh64x_media): Initialize info->private_data by calling
454 init_sh64_disasm_info.
455 (print_insn_sh64x): Ditto. Find out type of contents by calling
456 sh64_contents_type_disasm. Display data regions using ".long" and
457 ".byte" similar to unrecognized opcodes.
458 2000-12-19 Hans-Peter Nilsson <hpn@cygnus.com>
459 * sh64-dis.c (is_shmedia_p): Check info->section and look for ISA
460 information in section flags before considering symbols. Don't
461 assume an info->mach setting of bfd_mach_sh5 means SHmedia code.
462 * configure.in (bfd_sh_arch): Check presence of sh64 insns by
463 matching $target $canon_targets instead of looking at the
464 now-removed -DINCLUDE_SHMEDIA in $targ_cflags.
465 * configure: Regenerate.
466 2000-11-25 Hans-Peter Nilsson <hpn@cygnus.com>
467 * sh64-opc.c (shmedia_creg_table): New.
468 * sh64-opc.h (shmedia_creg_info): New type.
469 (shmedia_creg_table): Declare.
470 * sh64-dis.c (creg_name): New function.
471 (print_insn_shmedia): Use it.
472 * disassemble.c (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map
473 bfd_mach_sh5 to print_insn_sh64 if big-endian and to
474 print_insn_sh64l if little-endian.
475 * sh64-dis.c (print_insn_shmedia): Make r unsigned.
476 (print_insn_sh64l): New.
477 (print_insn_sh64x): New.
478 (print_insn_sh64x_media): New.
479 (print_insn_sh64): Break out code to print_insn_sh64x and
480 print_insn_sh64x_media.
481 2000-11-24 Hans-Peter Nilsson <hpn@cygnus.com>
482 * sh64-opc.h: New file
483 * sh64-opc.c: New file
484 * sh64-dis.c: New file
485 * Makefile.am: Add sh64 targets.
486 (HFILES): Add sh64-opc.h.
487 (CFILES): Add sh64-opc.c and sh64-dis.c.
488 (ALL_MACHINES): Add sh64 files.
489 * Makefile.in: Regenerate.
490 * configure.in: Add support for sh64 to bfd_sh_arch.
491 * configure: Regenerate.
492 * disassemble.c [ARCH_all] (INCLUDE_SHMEDIA): Define.
493 (disassembler) [ARCH_sh, INCLUDE_SHMEDIA]: Map bfd_mach_sh5 to
495 * sh-dis.c (print_insn_shx): Handle bfd_mach_sh5 as arch_sh4.
496 * po/POTFILES.in: Regenerate.
497 * po/opcodes.pot: Regenerate.
499 2002-02-04 Frank Ch. Eigler <fche@redhat.com>
501 * cgen-dis.in (print_insn_@arch@): Support disassemble_info.insn_sets.
503 2002-02-04 Alexandre Oliva <aoliva@redhat.com>
505 * sh-opc.h (sh_arg_type): Added A_DISP_PC_ABS.
507 2002-02-01 Alan Modra <amodra@bigpond.net.au>
509 * Makefile.am: Run "make dep-am"
510 * Makefile.in: Regenerate.
512 2002-01-31 Ivan Guzvinec <ivang@opencores.org>
514 * or32-dis.c: New file.
515 * or32-opc.c: New file.
516 * configure.in: Add support for or32.
517 * configure: Regenerate.
518 * Makefile.am: Add support for or32.
519 * Makefile.in: Regenerate.
520 * disassemble.c: Add support for or32.
521 * po/POTFILES.in: Regenerate.
522 * po/opcodes.pot: Regenerate.
524 2002-01-27 Daniel Jacobowitz <drow@mvista.com>
526 * configure: Regenerated.
528 2002-01-26 Nick Clifton <nickc@cambridge.redhat.com>
530 * po/fr.po: Updated version.
532 2002-01-25 Nick Clifton <nickc@cambridge.redhat.com>
534 * po/es.po: Updated version.
536 2002-01-24 Nick Clifton <nickc@cambridge.redhat.com>
538 * po/da.po: New version.
540 2002-01-23 Nick Clifton <nickc@cambridge.redhat.com>
542 * po/da.po: New file: Spanish translation.
543 * configure.in (ALL_LINGUAS): Add da.
544 * configure: Regenerate.
546 2002-01-22 Graydon Hoare <graydon@redhat.com>
548 * fr30-asm.c: Regenerate.
549 * fr30-desc.c: Likewise.
550 * fr30-desc.h: Likewise.
551 * fr30-dis.c: Likewise.
552 * fr30-ibld.c: Likewise.
553 * fr30-opc.c: Likewise.
554 * fr30-opc.h: Likewise.
555 * m32r-asm.c: Likewise.
556 * m32r-desc.c: Likewise.
557 * m32r-desc.h: Likewise.
558 * m32r-dis.c: Likewise.
559 * m32r-ibld.c: Likewise.
560 * m32r-opc.c: Likewise.
561 * m32r-opc.h: Likewise.
562 * m32r-opinst.c: Likewise.
563 * openrisc-asm.c: Likewise.
564 * openrisc-desc.c: Likewise.
565 * openrisc-desc.h: Likewise.
566 * openrisc-dis.c: Likewise.
567 * openrisc-ibld.c: Likewise.
568 * openrisc-opc.c: Likewise.
569 * openrisc-opc.h: Likewise.
570 * xstormy16-desc.c: Likewise.
572 2002-01-22 Richard Henderson <rth@redhat.com>
574 * alpha-dis.c (print_insn_alpha): Also mask the base opcode for
577 2002-01-22 Alan Modra <amodra@bigpond.net.au>
579 * Makefile.am: Run "make dep-am".
580 * Makefile.in: Regenerate.
581 * opcodes/po/POTFILES.in: Regenerate.
583 2002-01-19 Richard Earnshaw <rearnsha@arm.com>
585 * arm-opc.h (arm_opcodes): Use generic rule %5?hb instead of %h.
586 * arm-dis.c (print_insn_arm): Don't handle 'h' case.
588 2002-01-18 Keith Walker <keith.walker@arm.com>
590 * arm-opc.h (arm_opcodes): Add bxj instruction.
592 2002-01-17 Nick Clifton <nickc@cambridge.redhat.com>
594 * po/opcodes.pot: Regenerate.
595 * po/fr.po: Regenerate.
596 * po/sv.po: Regenerate.
597 * po/tr.po: Regenerate.
599 2002-01-16 Nick Clifton <nickc@cambridge.redhat.com>
601 * po/tr.po: Import new version.
603 2002-01-15 Richard Earnshaw <rearnsha@arm.com>
605 * arm-opc.h (arm_opcodes): Add patterns for VFP instructions.
606 * arm-dis.c (print_insn_arm): Support new disassembly qualifiers for
609 2002-01-10 matthew green <mrg@redhat.com>
611 * xstormy16-asm.c: Regenerate.
612 * xstormy16-desc.c: Likewise.
613 * xstormy16-desc.h: Likewise.
614 * xstormy16-dis.c: Likewise.
615 * xstormy16-opc.c: Likewise.
616 * xstormy16-opc.h: Likewise.
618 2002-01-07 Nick Clifton <nickc@cambridge.redhat.com>
620 * po/es.po: New file: Spanish translation.
621 * configure.in (ALL_LINGUAS): Add es.
622 * configure: Regenerate.
624 2001-12-31 Jeffrey A Law (law@redhat.com)
626 * hppa-dis.c (print_insn_hppa): Handle new 'c' mode completers,
627 'X', 'M', and 'A'. No longer emit a space after 'x' or 's'.
628 Always emit a space after 'H'.
630 2001-12-18 matthew green <mrg@redhat.com>
632 * ppc-opc.c (PPCVEC): Include PPC_OPCODE_ANY.
634 2001-12-17 Richard Henderson <rth@redhat.com>
636 * alpha-opc.c (unop): Encode with RB as $sp.
638 2001-12-07 Geoffrey Keating <geoffk@redhat.com>
640 * Makefile.am: Add support for xstormy16.
641 * Makefile.in: Regenerate.
642 * configure.in: Add support for xstormy16.
643 * configure: Regenerate.
644 * disassemble.c: Add support for xstormy16.
645 * xstormy16-asm.c: New generated file.
646 * xstormy16-desc.c: New generated file.
647 * xstormy16-desc.h: New generated file.
648 * xstormy16-dis.c: New generated file.
649 * xstormy16-ibld.c: New generated file.
650 * xstormy16-opc.c: New generated file.
651 * xstormy16-opc.h: New generated file.
653 2001-12-06 Richard Henderson <rth@redhat.com>
655 * alpha-opc.c (alpha_opcodes): Add wh64en.
657 2001-12-04 Alexandre Oliva <aoliva@redhat.com>
659 * d10v-opc.c (d10v_predefined_registers): Remove warnings
660 introduced in Nov 29's patch.
662 * d10v-dis.c (print_operand): Apply REGISTER_MASK to `num' of
665 * d10v-dis.c (print_operand): Disregard OPERAND_SP in register
668 * d10v-opc.c (RSRC_NOSP): New macro.
669 (d10v_operands): Add it.
670 (d10v_opcodes): Use RSRC_NOSP in post-decrement "st" and "st2w".
672 2001-11-29 Alexandre Oliva <aoliva@redhat.com>
674 * d10v-opc.c (d10v_predefined_registers): Mark `sp' as OPERAND_SP.
675 (RSRC_SP): New macro.
676 (d10v_operands): Add it.
677 (d10v_opcodes): Adjust "st" and "st2w" to use RSRC_SP.
679 2001-11-23 Lars Brinkhoff <lars@nocrew.org>
681 * pdp11-dis.c (print_insn_pdp11): Handle illegal instructions.
682 Also, break out of the loop as soon as an instruction has been
685 2001-11-17 matthew green <mrg@redhat.com>
687 * ppc-opc.c (mfvrsave, mtvrsave): New instructions.
689 2001-11-15 Alan Modra <amodra@bigpond.net.au>
691 * po/POTFILES.in: Regenerate.
693 * ppc-opc.c (PPC64): Revert 2001-10-12. Do include PPC_OPCODE_PPC.
694 (insert_bat, extract_bat, insert_bba, extract_bba,
695 insert_bd, extract_bd, insert_bdm, extract_bdm,
696 insert_bdp, extract_bdp, valid_bo,
697 insert_bo, extract_bo, insert_boe, extract_boe,
698 insert_ds, extract_ds, insert_de, extract_de,
699 insert_des, extract_des, insert_li, extract_li,
700 insert_mbe, extract_mbe, insert_mb6, extract_mb6,
701 insert_nb, extract_nb, insert_nsi, extract_nsi,
702 insert_ral, insert_ram, insert_ras,
703 insert_rbs, extract_rbs, insert_sh6, extract_sh6,
704 insert_spr, extract_spr, insert_tbr, extract_tbr): Add dialect param.
705 (extract_bd, extract_bdm, extract_bdp,
706 extract_ds, extract_des,
707 extract_li, extract_nsi): Implement sign extension without conditional.
708 (insert_bdm, extract_bdm,
709 insert_bdp, extract_bdp, valid_bo): Handle 64 bit branch hints.
710 (extract_bdm, extract_bdp): Correct 32 bit validation.
711 (AT1_MASK, AT2_MASK): Define.
712 (BBOAT_MASK): Define.
713 (BBOATCB_MASK, BBOAT2CB_MASK, BBOATBI_MASK): Define.
714 (BOFM64, BOFP64, BOTM64, BOTP64): Define.
715 (BODNZM64, BODNZP64, BODZM64, BODZP64): Define.
716 (PPCCOM32, PPCCOM64): Define.
717 (powerpc_opcodes): Modify existing 32 bit insns with branch hints
718 and add new patterns to implement 64 bit branches with hints. Move
719 booke instructions so they match before ppc64.
721 * ppc-dis.c (powerpc_dialect): Set PPC_OPCODE_64 in dialect for
722 64 bit default targets, and parse "32" and "64" in options.
724 (print_insn_powerpc): Pass dialect to operand->extract.
726 2001-11-14 Dave Brolley <brolley@redhat.com>
728 * cgen-dis.c (count_decodable_bits): New function.
729 (add_insn_to_hash_chain): New function.
730 (hash_insn_array): Call add_insn_to_hash_chain.
731 (hash_insn_list): Call add_insn_to_hash_chain.
732 * m32r-dis.c: Regenerated.
733 * fr30-dis.c: Regenerated.
735 2001-11-14 Andreas Jaeger <aj@suse.de>
737 * i386-dis.c (print_insn): Use x86-64 as option.
739 2001-11-14 Alan Modra <amodra@bigpond.net.au>
741 * disassemble.c (disassembler): Call print_insn_i386.
742 * i386-dis.c (SUFFIX_ALWAYS): Define.
743 (struct dis_private): Add orig_sizeflag.
744 (print_insn_i386): Make it a wrapper, calling..
745 (print_insn): ..The old body of print_insn_i386. Avoid longjmp
746 warning without using volatile by moving orig_sizeflag to priv,
747 and removing inbuf. Parse disassembler_options.
748 (print_insn_i386_att, print_insn_i386_intel): Move initialisation
750 (putop): Remove #ifdef SUFFIX_ALWAYS.
752 2001-11-11 Timothy Wall <twall@alum.mit.edu>
754 * tic54x-dis.c: Use revised opcode structure. Export opcode
756 (has_lkaddr): Don't forget about Lmem insns.
757 * tic54x-opc.c: Add emulation trap. Parallel table now uses
758 standard opcode templates.
760 2001-11-13 Zack Weinberg <zack@codesourcery.com>
762 * i386-dis.c (grps): Change "sldt", "str", and "smsw" entries
763 to "sldtQ", "strQ", "smswQ" respectively; all with Ev operand
764 category instead of Ew.
766 2001-11-12 Niraj Gupta <ngupta@zumanetworks.com>
768 * m68k-opc.c: Fix definitions of wddata[bwl].
770 2001-11-09 Richard Sandiford <rsandifo@redhat.com>
772 * cgen-asm.c (cgen_parse_keyword): If the keyword is too big to
773 fit in the buffer, try to match the empty keyword.
775 2001-11-09 Nick Clifton <nickc@cambridge.redhat.com>
777 * cgen-ibld.in (extract_1): Fix badly placed #if 0.
778 * fr30-ibld.c: Regenerate.
779 * m32r-ibld.c: Regenerate.
780 * openrisc-ibld.c: Regenerate.
782 2001-11-04 Chris Demetriou <cgd@broadcom.com>
784 * mips-dis.c (print_insn_mips): Remove spaces at end of line.
786 2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
788 * configure.in (ALL_LINGUAS): Add "fr", "sv" and "tr".
789 * configure: Regernate.
790 * po/fr.po: New file.
791 * po/sv.po: New file.
792 * po/tr.po: New file.
794 2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
796 * m68hc11-dis.c (print_insn): Fix disassembly of movb with a
799 2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
801 * Makefile.am (CFILES): Add mmix-dis.c and mmix-opc.c. Regenerate
803 * Makefile.in: Regenerate.
804 * mmix-dis.c, mmix-opc.c: New files.
806 2001-10-29 Kazu Hirata <kazu@hxi.com>
808 * d30v-dis.c: Fix a comment typo.
810 2001-10-23 Chris Demetriou <cgd@broadcom.com>
812 * mips-opc.c (mips_builtin_opcodes): Mark "bgezall" and
813 "bltzall" as writing GPR 31 (since they do).
815 * mips-dis.c (print_insn_arg): Calculate info->target
817 (print_insn_mips): Fill in instruction info.
818 (print_mips16_insn_arg): Remove unneded variable 'val'.
819 Removed duplicated instruction target calculations,
820 calculate once and print that result. Use same idiom for
821 masking the jump segment bits as is used in print_insn_arg.
823 2001-10-20 Alan Modra <amodra@bigpond.net.au>
825 * ppc-opc.c (CT): Make it an optional operand.
827 2001-10-17 Chris Demetriou <cgd@broadcom.com>
829 * mips-dis.c (mips_isa_type): Make the ISA used to disassemble
830 SB-1 binaries include instructions specific to the SB-1.
831 * mips-opc.c (SB1): New definition.
832 (mips_builtin_opcodes): Add SB-1 extension opcodes "div.ps",
833 "recip.ps", "rsqrt.ps", and "sqrt.ps".
835 2001-10-17 matthew green <mrg@redhat.com>
837 * ppc-opc.c (STRM): New AltiVec operand.
838 (XDSS): New AltiVec instruction form.
839 (mtvscr): Correct operand list.
840 (dst, dstt, dstst, dststt, dss, dssall): AltiVec instructions.
842 2001-10-17 Alan Modra <amodra@bigpond.net.au>
844 * po/POTFILES.in: Regenerate.
846 2001-10-13 matthew green <mrg@redhat.com>
848 * ppc-opc.c (MO): New macro for MO field of mbar instruction.
849 (powerpc_opcodes): Add rfci, wrtee, wrteei, mfdcrx, mfdcr,
850 mtdcrx, mtdcr, msync, dcba and mbar as BookE instructions.
852 2001-10-13 Nick Clifton <nickc@cambridge.redhat.com>
854 * cgen-ibld.in: Include safe-ctype.h in preference to
856 * cgen-asm.in: Include safe-ctype.h in preference to
857 ctype.h. Fix formatting. Use ISSPACE instead of isspace and
858 TOLOWER instead of tolower.
859 (@arch@_cgen_build_insn_regex): Remove duplication of syntax
860 string elements in constructed regular expression.
861 * fr30-asm.c: Regenerate.
862 * fr30-desc.c: Regenerate.
863 * fr30-ibld.c: Regenerate.
864 * m32r-asm.c: Regenerate.
865 * m32r-desc.c: Regenerate.
866 * m32r-ibld.c: Regenerate.
867 * openrisc-asm.c: Regenerate.
868 * openrisc-desc.c: Regenerate.
869 * openrisc-ibld.c: Regenerate.
870 * po/opcodes.pot: Regenerate.
872 2001-10-12 matthew green <mrg@redhat.com>
874 * ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
875 instruction field instruction/extraction functions for new BookE
876 DE form instructions.
877 (CT): New macro for CT field in an X form instruction.
878 (DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
880 (PPC64): Don't include PPC_OPCODE_PPC.
881 (403): New opcode macro for PPC403 processors.
882 (BOOKE): New opcode macro for BookE processors.
883 (bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
884 (bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
885 (dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
886 (stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
887 (mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
888 (subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
889 (subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
890 (addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
891 (lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
892 (stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
893 (tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
894 (lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
895 (stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
896 (lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
898 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
899 for a disassembler option of `booke', `booke32' or `booke64' to enable
900 BookE support in the disassembler.
902 2001-10-12 John Healy <jhealy@redhat.com>
904 * cgen-dis.in (print_insn): Use min (cd->base_insn_bitsize, buflen*8)
905 for the length when extracting the base part of the insn.
907 2001-10-09 Bruno Haible <haible@clisp.cons.org>
909 * cgen-asm.in (*_cgen_build_insn_regex): Generate a case sensitive
910 regular expression. Fix some formatting problems.
911 * fr30-asm.c: Regenerate.
912 * openrisc-asm.c: Regenerate.
913 * m32r-asm.c: Regenerate.
915 2001-10-09 Christian Groessler <cpg@aladdin.de>
917 * z8k-dis.c (unparse_instr): Fixed formatting. Change disassembly
918 of indirect register memory accesses to be same format the
921 2001-10-09 Nick Clifton <nickc@cambridge.redhat.com>
923 * sh-opc.h: Fix encoding of least significant nibble of the
924 DSP single data transfer instructions.
926 * sh-dis.c (print_insn_shx): Fix decoding of As opcode in DSP
929 2001-10-08 Nick Clifton <nickc@cambridge.redhat.com>
931 * cgen-asm.in: Fix compile time warning messages in generated
933 * cgen-dis.in: The same.
934 * cgen-ibld.in: The same.
935 * fr30-asm.c: Regenerate.
936 * fr30-desc.c: Regenerate.
937 * fr30-dis.c: Regenerate.
938 * fr30-ibld.c: Regenerate.
939 * fr30-opc.c: Regenerate.
940 * m32r-asm.c: Regenerate.
941 * m32r-desc.c: Regenerate.
942 * m32r-dis.c: Regenerate.
943 * m32r-ibld.c: Regenerate.
944 * m32r-opc.c: Regenerate.
945 * m32r-opinst.c Regenerate.
946 * openrisc-asm.c: Regenerate.
947 * openrisc-desc.c: Regenerate.
948 * openrisc-dis.c: Regenerate.
949 * openrisc-ibld.c: Regenerate.
950 * openrisc-opc.c: Regenerate.
951 * openrisc-opc.h: Regenerate.
952 * Makefile.in: Regenerate.
953 * po/POTFILES.in: Regenerate.
954 * po/opcodes.pot: Regenerate.
956 2001-10-08 Aldy Hernandez <aldyh@redhat.com>
958 * arm-opc.h (arm_opcodes): Add cirrus insns.
960 * arm-dis.c (print_insn_arm): Add 'I' case.
962 2001-10-03 Alan Modra <amodra@bigpond.net.au>
964 * po/POTFILES.in: Regenerate.
965 * configure: Regenerate.
967 2001-10-02 Alan Modra <amodra@bigpond.net.au>
969 * Makefile.am (Makefile): Depend on bfd/configure.in.
971 * Makefile.in: Regenerate.
973 2001-09-30 John Healy <jhealy@redhat.com>
975 * cgen-ibld.in (insert_1): Switched bfd_get_bits and bfd_set_bits
976 calls to cgen_get_insn_value and cgen_put_insn_value calls.
977 (extract_1): Switched bfd_get_bits call to cgen_get_insn_value call.
979 2001-09-30 Hans-Peter Nilsson <hp@bitrange.com>
981 * Makefile.am: Update dependencies with "make dep-am".
982 * Makefile.in: Regenerate.
984 2001-09-26 Alan Modra <amodra@bigpond.net.au>
986 * arc-dis.c: Formatting fixes.
987 (my_sprintf): Define using VPARAMS, VA_OPEN, VA_FIXEDARG, VA_CLOSE.
989 2001-09-21 Bruno Haible <haible@clisp.cons.org>
991 * arc-dis.c: Don't include <ctype.h>.
992 * openrisc-desc.c: Likewise.
993 * openrisc-ibld.c: Likewise.
995 2001-09-20 Nick Clifton <nickc@cambridge.redhat.com>
997 * fr30-opc.c: Fix compile time warning messages.
998 * i370-opc.c: Fix compile time warning messages.
999 * i960-dis.c: Fix compile time warning messages.
1000 * m32r-asm.c: Fix compile time warning messages.
1001 * m32r-desc.c: Fix compile time warning messages.
1002 * m32r-dis.c: Fix compile time warning messages.
1003 * m32r-ibld.c: Fix compile time warning messages.
1004 * m32r-opc.c: Fix compile time warning messages.
1005 * m32r-opinst.c: Fix compile time warning messages.
1006 * ns32k-dis.c: Fix compile time warning messages.
1007 * openrisc-asm.c: Fix compile time warning messages.
1008 * openrisc-desc.c: Fix compile time warning messages.
1009 * openrisc-dis.c: Fix compile time warning messages.
1010 * openrisc-ibld.c: Fix compile time warning messages.
1011 * openrisc-opc.c: Fix compile time warning messages.
1012 * pdp11-dis.c: Fix compile time warning messages.
1013 * tic54x-dis.c: Fix compile time warning messages.
1014 * v850-opc.c: Fix compile time warning messages.
1015 * vax-dis.c: Fix compile time warning messages.
1016 * w65-opc.h: Fix compile time warning messages.
1017 * z8k-opc.h: Fix compile time warning messages.
1018 * z8kgen.c: Fix compile time warning messages.
1020 2001-09-19 Nick Clifton <nickc@cambridge.redhat.com>
1022 * arm-dis.c: Fix compile time warning messages.
1023 * cgen-asm.c: Fix compile time warning messages.
1024 * cgen-dis.c: Fix compile time warning messages.
1025 * cris-dis.c: Fix compile time warning messages.
1026 * d10v-dis.c: Fix compile time warning messages.
1027 * fr30-asm.c: Fix compile time warning messages.
1028 * fr30-desc.c: Fix compile time warning messages.
1029 * fr30-dis.c: Fix compile time warning messages.
1030 * fr30-ibld.c: Fix compile time warning messages.
1032 2001-09-18 Bruno Haible <haible@clisp.cons.org>
1034 * cgen-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1035 (cgen_parse_keyword): Use ISALNUM instead of isalnum.
1036 * cgen-opc.c: Include "safe-ctype.h" instead of <ctype.h>.
1037 (cgen_keyword_lookup_name): Use ISALPHA/TOLOWER instead of
1039 (cgen_keyword_add): Use ISALNUM instead of isalnum.
1040 (hash_keyword_name): Use TOLOWER instead of tolower.
1041 * fr30-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1042 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1044 (fr30_cgen_assemble_insn): Use ISSPACE instead of isspace.
1045 * fr30-desc.c: Don't include <ctype.h>.
1046 * fr30-ibld.c: Likewise.
1047 * ia64-gen.c: Include "safe-ctype.h" instead of <ctype.h>.
1048 (load_insn_classes, parse_resource_users, load_depfile): Use
1049 ISSPACE instead of isspace.
1050 * m32r-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1051 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1053 (m32r_cgen_assemble_insn): Use ISSPACE instead of isspace.
1054 * m32r-desc.c: Don't include <ctype.h>.
1055 * m32r-ibld.c: Likewise.
1056 * openrisc-asm.c: Include "safe-ctype.h" instead of <ctype.h>.
1057 (parse_insn_normal): Use TOLOWER/ISSPACE instead of
1059 (openrisc_cgen_assemble_insn): Use ISSPACE instead of isspace.
1061 2001-09-18 Martin Schwidefsky <schwidefsky@de.ibm.com>
1063 * Makefile.am: Add rules and dependencies to create the s/390 opcode
1064 table out of s390-opc.txt automatically.
1065 * configure.in: Add BFD_CC_FOR_BUILD to allow CC_FOR_BUILD to be used.
1066 * s390-mkopc.c (dumpTable): Change output to create a complete file.
1067 * s390-opc.c: New improved opcode format macros and remove the
1068 pregenerated opcode table.
1069 * s390-opc.txt: Adapt to new improved opcode format macros.
1071 2001-09-14 David Schleef <ds@schleef.org>
1073 * ppc-opc.c (VXA, VXA_MASK): Fix mask bits.
1075 2001-09-04 Alan Modra <amodra@bigpond.net.au>
1077 * i386-dis.c (grps): Don't print the implicit al/ax/eax register
1078 for opcode 0xf6 or 0xf7 forms of mul, imul, div, idiv insns.
1080 2001-08-31 Eric Christopher <echristo@redhat.com>
1081 Jason Eckhardt <jle@redhat.com>
1083 * mips-dis.c: Add support for bfd_mach_mipsisa32 and
1084 bfd_mach_mipsisa64. Remove bfd_mach_mips32, bfd_mach_mips32_4k,
1087 2001-08-31 Andreas Jaeger <aj@suse.de>
1089 * tic54x-opc.c: Add default initializers to avoid warnings.
1091 * arc-opc.c: Include "sysdep.h" to get stdio.h as include file.
1092 * arc-ext.c: Likewise.
1094 2001-08-28 matthew green <mrg@redhat.com>
1096 * ppc-opc.c (icbt): Order correctly.
1098 2001-08-27 David Edelsohn <dje@watson.ibm.com>
1099 Torbjorn Granlund <tege@swox.com>
1101 * ppc-opc.c (DS): Add PPC_OPERAND_DS flag.
1103 (insert_ds): Complain if not a multiple of 4.
1105 (XSYNC_MASK): Define.
1106 (powerpc_opcodes): Add "slbmte", "lwsync", "ptesync", "slbmfev",
1107 "slbmfee". Modify "sync" to use XSYNC_MASK and LS.
1109 2001-08-26 Andreas Jaeger <aj@suse.de>
1111 * h8500-opc.h: Add default initializers to h8500_table to shut up
1114 2001-08-25 Andreas Jaeger <aj@suse.de>
1116 * tic54x-dis.c: Add unused attributes where needed.
1118 * z8k-dis.c (output_instr): Add unused attribute.
1120 * h8300-dis.c: Add missing prototypes.
1121 (bfd_h8_disassemble): Make static.
1123 * cris-dis.c: Add missing prototype.
1124 * h8500-dis.c: Likewise.
1125 * m68hc11-dis.c: Likewise.
1126 * pj-dis.c: Likewise.
1127 * tic54x-dis.c: Likewise.
1128 * v850-dis.c: Likewise.
1129 * vax-dis.c: Likewise.
1130 * w65-dis.c: Likewise.
1131 * z8k-dis.c: Likewise.
1133 * d10v-dis.c: Add missing prototype.
1134 (dis_long): Remove unused variable.
1135 (dis_2_short): Likewise.
1137 * sh-dis.c: Add missing prototypes.
1138 * v850-opc.c: Likewise.
1139 Add unused attributes where needed.
1141 * ns32k-dis.c: Add missing prototypes.
1142 (bit_extract_simple): Remove unused variable.
1144 2001-08-23 Martin Schwidefsky <schwidefsky@de.ibm.com>
1146 * opcodes/s390-opc.c: Add "low or high" and "not low or high"
1147 branch instructions for gcc 3.0.
1148 * opcodes/s390-opc.txt: Likewise.
1150 2001-08-21 Andreas Jaeger <aj@suse.de>
1152 * i960-dis.c: Add parameters for prototypes
1153 (ctrl): Add unused attributes.
1155 (put_abs): Likewise.
1157 * mips-dis.c: Add missing prototypes.
1158 * a29k-dis.c: Likewise.
1159 * arc-dis.c: Likewise.
1160 * ia64-opc.c: Likewise.
1162 * s390-dis.c: Add missing prototypes.
1163 (init_disasm): Remove unused attribute since the parameter is
1166 2001-08-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1168 * mips-opc.c (M1): Define. Reformatted Code.
1169 (mips_builtin_opcodes): Added performance counter opcodes mfpc, mfps,
1172 2001-08-16 Jonathan Larmour <jlarmour@redhat.com>
1174 * mips-opc.c: R3900s can support all branch likely INSN_MACROs where
1175 the corresponding non-likely insn is in MIPS I.
1177 2001-08-13 Kazu Hirata <kazu@hxi.com>
1179 * mcore-dis.c: Fix formatting.
1180 * mips-dis.c: Likewise.
1181 * pj-dis.c: Likewise.
1182 * z8k-dis.c: Likewise.
1184 2001-08-12 Richard Henderson <rth@redhat.com>
1186 * cgen-ibld.in (extract_normal): Match type of VALUE and MASK
1187 to *VALUEP. Regenerate all cgen files.
1189 2001-08-10 Richard Sandiford <rsandifo@redhat.com>
1191 * mips-dis.c (print_insn_mips): Remove OPCODE_IS_MEMBER's gp32
1193 * mips-opc.c (G6): Undefine.
1194 (mips_builtin_opcodes): Remove gp32 entry for "move". Add macro
1195 as the first "move" alternative.
1197 2001-08-10 Andreas Jaeger <aj@suse.de>
1199 * configure.in: Add -Wstrict-prototypes and -Wmissing-prototypes
1201 * configure: Regenerate.
1203 2001-08-10 Alan Modra <amodra@bigpond.net.au>
1205 * ppc-opc.c: Revert 2001-08-08.
1207 2001-08-09 Alan Modra <amodra@bigpond.net.au>
1209 * dis-buf.c (generic_strcat_address): Add missing prototype.
1210 #if 0 the functions as it is unused.
1212 2001-08-08 Alan Modra <amodra@bigpond.net.au>
1214 1999-10-25 Torbjorn Granlund <tege@swox.com>
1215 * ppc-opc.c: Include "bfd.h".
1216 (powerpc_operands): Add new field for reloc type.
1218 2001-07-21 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1220 * mips-dis.c (print_insn_arg): Don't use software integer registers
1221 for coprocessor registers.
1222 (get_mips_isa): Removed.
1223 (is_newabi): New function, checks if NewABI is used.
1224 (_print_insn_mips): Get distinction between old ABI and new ABI right.
1226 2001-08-01 Christian Groessler <cpg@aladdin.de>
1228 * z8kgen.c: Fixed indentation of opt[] array. Include stdio.h to
1229 get stderr definition.
1230 (internal, gas): Removed warnings.
1231 (gas): Create a correct final entry for created array.
1232 * z8k-opc.h: Recreated with new z8kgen.
1234 2001-07-28 Kazu Hirata <kazu@hxi.com>
1236 * i386-dis.c: Fix formatting.
1238 2001-07-28 Matthias Kramm <kramm@quiss.org>
1240 * i386-dis.c: Change formatting conventions for architecture
1241 i386:intel to better match the format of various intel i386
1242 assemblers, like nasm, tasm or masm.
1244 2001-07-24 Alan Modra <amodra@bigpond.net.au>
1246 * Makefile.am: Update dependencies with "make dep-am".
1247 * Makefile.in: Regenerate
1249 2001-07-24 Kazu Hirata <kazu@hxi.com>
1251 * alpha-dis.c: Fix formatting.
1252 * cris-dis.c: Likewise.
1253 * d10v-dis.c: Likewise.
1254 * d30v-dis.c: Likewise.
1255 * m10300-dis.c: Likewise.
1256 * tic54x-dis.c: Likewise.
1258 2001-07-23 Kazu Hirata <kazu@hxi.com>
1260 * m68k-dis.c: Fix formatting.
1261 * pj-dis.c: Likewise.
1262 * s390-dis.c: Likewise.
1263 * z8k-dis.c: Likewise.
1265 2001-07-21 Chris Demetriou <cgd@broadcom.com>
1267 * mips-opc.c (mips_builtin_opcodes): Sort c.le.s and c.lt.s
1268 into the rest of the surrounding definitions.
1270 2001-07-18 Alan Modra <amodra@bigpond.net.au>
1272 * i386-dis.c (grps): Print l or w suffix, and require mem modrm
1273 for lgdt, lidt, sgdt, sidt.
1275 2001-07-13 Philip Blundell <philb@gnu.org>
1277 * arm-dis.c (print_insn_arm): Use decimal for offsets in LDR/STR.
1279 2001-07-12 Jeff Johnston <jjohnstn@redhat.com>
1281 * cgen-asm.in: Include "xregex.h" always to enable the libiberty
1283 (@arch@_cgen_build_insn_regex): New routine from Graydon.
1284 (@arch@_cgen_assemble_insn): Add Graydon's code to use regex
1285 to verify if it is worth parsing the insn as insn "x". Also update
1286 error message when insn is not a recognized format of the insn vs
1287 when the insn is completely unrecognized.
1289 2001-07-11 Frank Ch. Eigler <fche@redhat.com>
1291 * cgen-dis.in (print_insn): Use cgen_get_insn_value instead of
1293 * cgen-opc.c (cgen_get_insn_value, cgen_put_insn_value): Respect
1294 non-zero CGEN_CPU_DESC->insn_chunk_bitsize.
1296 2001-07-09 Andreas Jaeger <aj@suse.de>, Karsten Keil <kkeil@suse.de>
1298 * i386-dis.c (set_op): Handle 64 bit and 32 bit mode.
1299 (OP_J): Use bfd_vma for mask to work properly with 64 bits.
1300 (op_address,op_riprel): Use bfd_vma to handle 64 bits.
1302 2001-07-05 Ben Elliston <bje@redhat.com>
1304 * Makefile.am (CPUDIR): Define.
1305 (stamp-m32r): Update dependencies.
1306 (stamp-fr30): Ditto.
1307 (stamp-openrisc): Ditto.
1308 * Makefile.in: Regenerate.
1310 2001-07-03 Zoltan Hidvegi <hzoli@hzoli.2y.net>
1312 * ppc-opc.c: Fix encoding of 'clf' instruction.
1314 2001-06-30 Geoffrey Keating <geoffk@redhat.com>
1316 * cgen-ibld.in (insert_normal): Support CGEN_IFLD_SIGN_OPT.
1318 2001-06-28 Geoffrey Keating <geoffk@redhat.com>
1320 * cgen-asm.c (cgen_parse_keyword): Allow any first character.
1321 * cgen-opc.c (cgen_keyword_add): Ignore special first
1322 character when building nonalpha_chars field.
1324 2001-06-24 Ben Elliston <bje@redhat.com>
1326 * m88k-dis.c: Format to conform to GNU coding standards.
1328 2001-06-23 Andreas Jaeger <aj@suse.de>
1330 * disassemble.c (disassembler_usage): Add unused attribute.
1332 2001-06-22 Eric Christopher <echristo@redhat.com>
1334 * mips-opc.c: Move prefx to start of the table.
1336 2001-06-22 Stacey Sheldon <ssheldon@Catena.com>
1338 * arc-opc.c (insert_st_syntax): Fix over-optimisation of ST
1341 2001-06-22 Pauli <pauli@moreton.com.au>
1343 * m68k-opc.c: Add wdebug instruction.
1345 2001-06-15 Aldy Hernandez <aldyh@redhat.com>
1347 * m10300-opc.c (mn10300_opcodes): Change opcode for AM33 subc.
1349 2001-06-14 Geoffrey Keating <geoffk@redhat.com>
1351 * cgen-asm.c (cgen_parse_keyword): When looking for the
1352 boundaries of a keyword, allow any special characters
1353 that are actually in one of the allowed keyword.
1354 * cgen-opc.c (cgen_keyword_add): Add any special characters
1355 to the nonalpha_chars field.
1357 2001-06-12 Martin Schwidefsky <schwidefsky@de.ibm.com>
1359 * s390-opc.c: Add lgh instruction.
1360 * s390-opc.txt: Likewise.
1362 2001-06-11 Alan Modra <amodra@bigpond.net.au>
1364 * i386-dis.c: Group function prototypes in one place.
1365 (FLOATCODE): Redefine as 1.
1366 (USE_GROUPS): Redefine as 2.
1367 (USE_PREFIX_USER_TABLE): Redefine as 3.
1368 (X86_64_SPECIAL): Define as 4.
1369 (GRP1b..GRPAMD): Move USE_GROUPS to bytecode1, index to bytecode2.
1370 (PREGRP0..PREGRP26): Similarly with USE_PREFIX_USER_TABLE.
1371 (dis386_att, dis386_intel, disx86_64_att, disx86_64_intel): Delete.
1372 (dis386): New table combining above four tables.
1373 (dis386_twobyte_att, dis386_twobyte_intel): Delete.
1374 (dis386_twobyte): New table combining above two tables.
1375 (x86_64_table): New table to handle x86_64.
1377 (float_mem_att, float_mem_intel): Delet.
1378 (float_mem): New table combining above two tables.
1379 (print_insn_i386): Modify for above.
1380 (dofloat): Likewise.
1381 (putop): Handle '{', '|' and '}' to select alternative mnemonics.
1382 Return 0 on success, 1 if no valid alternative.
1383 (putop <case 'F'>, <case 'H'>): Print nothing for intel_syntax.
1384 (putop <case 'T'>): Move to case 'U', and share case 'Q' code.
1385 (putop <case 'I'>): Move to case 'T', and share case 'P' code.
1386 (OP_REG <case rAX_reg .. rDI_reg>): Handle as for eAX_reg .. eDI_reg
1388 (OP_I <case q_mode>): Handle as for v_mode if not 64-bit mode.
1389 (OP_I64): If not 64-bit mode, call OP_I.
1390 OP_OFF64): If not 64-bit mode, call OP_OFF.
1391 (OP_ST, OP_STi, OP_SEG, OP_DIR, OP_OFF, OP_OFF64, OP_MMX): Rename
1392 'ignore'/'ignored' to 'bytemode'.
1394 2001-06-10 Alan Modra <amodra@bigpond.net.au>
1396 * configure.in: Sort 'ta' case statement.
1397 * configure: Regenerate.
1399 * i386-dis.c (dis386_att): Add 'H' to conditional branch and
1401 (disx86_64_att): Likewise.
1402 (dis386_twobyte_att): Likewise.
1403 (print_insn_i386): Don't print branch hints as a prefix.
1404 (putop): 'H' macro prints branch hints.
1405 (get64): Kill compile warnings.
1407 2001-06-09 Alexandre Oliva <aoliva@redhat.com>
1409 * sh-opc.h (sh_table): Don't use empty initializers.
1411 2001-06-06 Christian Groessler <cpg@aladdin.de>
1413 * z8k-dis.c: Fix formatting.
1414 (unpack_instr): Remove unused cases in switch statement. Add
1415 safety abort() in default case.
1416 (unparse_instr): Add safety abort() in default case.
1418 2001-06-06 Peter Jakubek <pjak@snafu.de>
1420 * m68k-dis.c (print_insn_m68k): Fix typo.
1421 * m68k-opc.c (m68k_opcodes): Correct allowed operands for
1422 mcf (ColdFire) div, rem and moveb instructions.
1424 2001-06-06 Alan Modra <amodra@bigpond.net.au>
1426 * i386-dis.c (cond_jump_flag, loop_jcxz_flag): Define.
1427 (cond_jump_mode, loop_jcxz_mode): Define.
1428 (dis386_att): Add cond_jump_flag and loop_jcxz_flag as
1429 appropriate, and 'F' suffix to loop insns.
1430 (disx86_64_att): Likewise.
1431 (dis386_twobyte_att): Likewise.
1432 (print_insn_i386): Don't output addr prefix for loop, jcxz insns.
1433 Output data size prefix for long conditional jumps. Output cs and
1435 (putop): Handle 'F', and mark PREFIX_ADDR used for case 'E'.
1436 (OP_J): Don't make PREFIX_DATA used.
1438 2001-06-04 Alexandre Oliva <aoliva@redhat.com>
1440 * sh-opc.h (sh_table): Complete last element entry to avoid
1443 2001-05-16 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1445 * mips-dis.c (mips_isa_type): Add MIPS r12k support.
1447 2001-05-23 Alan Modra <amodra@one.net.au>
1449 * arc-opc.c: Whitespace changes.
1451 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
1453 * cris-opc.c (cris_spec_regs): Add missing initializer field for
1456 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
1458 * cgen-dis.in (extract_normal): Complete support for min<base case.
1460 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1462 * mips-dis.c (INSNLEN): Rename MAXLEN.
1463 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
1464 (print_insn_arg): Remove $ prefix of register names.
1465 (set_mips_isa_type): Remove.
1466 (mips_isa_type): New function.
1467 (get_mips_isa): New Function.
1468 (print_insn_mips): Rename _print_insn_mips.
1469 (_print_insn_mips): New function, contains code which was
1470 duplicated in print_insn_big_mips and print_insn_little_mips.
1471 (print_insn_big_mips): Moved code to _print_insn_mips.
1472 (print_insn_little_mips): Likewise.
1473 (print_mips16_insn_arg): Remove $ prefix of register names.
1474 Print error message before abort.
1476 2001-05-14 J.T. Conklin <jtc@redback.com>
1478 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
1479 simplified mnemonics used for setting PPC750-specific special
1482 2001-05-12 H.J. Lu <hjl@gnu.org>
1484 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
1487 2001-05-12 Peter Targett <peter.targett@arccores.com>
1489 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
1490 register to r/w. Formatting fixes throughout file.
1492 2001-05-12 Alan Modra <amodra@one.net.au>
1494 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
1496 (twobyte_has_modrm): Update table.
1497 (need_modrm): Give it file scope.
1498 (MODRM_CHECK): Define.
1499 (dofloat): Use MODRM_CHECK.
1504 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
1506 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
1507 even at end of a section.
1508 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
1509 by ignoring precariously-unpacked insn_value in favor of raw buffer.
1511 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
1513 * disassemble.c (disassembler_usage): Remove unused attribute.
1515 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1517 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
1519 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
1521 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
1522 assume incoming buffer already has the base insn loaded. Handle
1523 smaller-than-base instructions for variable-length case.
1525 2001-05-04 Alan Modra <amodra@one.net.au>
1527 * i386-dis.c (Ev, Ed): Remove duplicate define.
1530 (OP_XS): New function.
1531 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
1533 (dis386_twobyte_intel): Likewise.
1534 (prefix_user_table): Use MS for maskmovq operand.
1536 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
1538 * Makefile.am: Add OpenRISC target.
1539 * Makefile.in: Regenerated.
1541 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
1543 * configure.in (bfd_openrisc_arch): Add target.
1544 * configure: Regenerated.
1546 * openrisc-asm.c: New file.
1547 * openrisc-desc.c: Likewise.
1548 * openrisc-desc.h: Likewise.
1549 * openrisc-dis.c: Likewise.
1550 * openrisc-ibld.c: Likewise.
1551 * openrisc-opc.c: Likewise.
1552 * openrisc-opc.h: Likewise.
1554 2001-04-24 Christian Groessler <cpg@aladdin.de>
1556 * z8k-dis.c: add names of control registers (ctrl_names);
1557 (seg_length): provides instruction length fixup for segmented
1558 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
1559 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
1560 (unparse_intr): handle CLASS_PR, print addresses without '#'
1561 * z8k-opc.h: re-created with new z8kgen
1562 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
1563 entries for ldctl/ldctlb instruction
1565 2001-04-06 Andreas Jaeger <aj@suse.de>
1567 * i386-dis.c: Add ffreep instruction.
1569 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
1571 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
1573 2001-03-24 Alan Modra <alan@linuxcare.com.au>
1575 * i386-dis.c (PREGRP25): Define.
1576 (dis386_twobyte_att): Use here in place of "movntq" entry.
1577 (dis386_twobyte_intel): Likewise.
1578 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
1580 (dis386_twobyte_att): Use here.
1581 (dis386_twobyte_intel): Likewise.
1582 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
1583 (prefix_user_table <maskmovdqu>): XM operand, not MX.
1584 (prefix_user_table): Cosmetic changes to "bad" entries.
1586 2001-03-23 Nick Clifton <nickc@redhat.com>
1588 * mips-opc.c: Remove extraneous whitespace.
1589 * mips-dis.c: Remove extraneous whitespace.
1591 2001-03-22 Ben Elliston <bje@redhat.com>
1593 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
1594 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
1595 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
1596 to allay a compiler warning.
1598 2001-03-22 Alan Modra <alan@linuxcare.com.au>
1600 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
1601 (dis386_twobyte_intel): Likewise.
1602 (twobyte_has_modrm): Set entry for paddq, psubq.
1604 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
1606 * cgen-dis.in (print_insn_@arch@): Add support for target machine
1607 determination via CGEN_COMPUTE_MACH.
1608 * fr30-desc.c: Regenerate.
1609 * fr30-dis.c: Regenerate.
1610 * fr30-opc.h: Regenerate.
1611 * m32r-desc.c: Regenerate.
1612 * m32r-dis.c: Regenerate.
1613 * m32r-opc.h: Regenerate.
1614 * m32r-opinst.c: Regenerate.
1616 2001-03-20 H.J. Lu <hjl@gnu.org>
1618 * configure.in: Remove the redundent AC_ARG_PROGRAM.
1619 * configure: Rebuild.
1621 2001-03-19 Jim Wilson <wilson@redhat.com>
1623 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
1624 notestr if larger than xsect.
1625 (in_class): Handle format M5.
1626 * ia64-asmtab.c: Regnerate.
1628 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
1630 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
1631 has more than one byte left to read.
1633 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
1635 * s390-opc.c: Add new opcodes. Smooth out formatting.
1636 * s390-opc.txt: Add new opcodes.
1638 2001-03-06 Nick Clifton <nickc@redhat.com>
1640 * arm-dis.c (print_insn_thumb): Compute destination address
1641 of BLX(1) instruction by taking bit 1 from PC and not from bit
1644 2001-03-06 Igor Shevlyakov <igor@windriver.com>
1646 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
1647 so command line switches will work.
1649 2001-03-05 Dave Brolley <brolley@redhat.com>
1651 * fr30-asm.c: Regenerate.
1652 * fr30-desc.c: Regenerate.
1653 * fr30-desc.h: Regenerate.
1654 * fr30-dis.c: Regenerate.
1655 * fr30-ibld.c: Regenerate.
1656 * fr30-opc.c: Regenerate.
1657 * fr30-opc.h: Regenerate.
1658 * m32r-asm.c: Regenerate.
1659 * m32r-desc.c: Regenerate.
1660 * m32r-desc.h: Regenerate.
1661 * m32r-dis.c: Regenerate.
1662 * m32r-ibld.c: Regenerate.
1663 * m32r-opc.c: Regenerate.
1664 * m32r-opc.h: Regenerate.
1665 * m32r-opinst.c: Regenerate.
1667 2001-02-28 Igor Shevlyakov <igor@windriver.com>
1669 * m68k-opc.c: fix cpushl according to Motorola. Enable
1670 bunch of instructions for Coldfire 5407 and add all new.
1672 2001-02-27 Alan Modra <alan@linuxcare.com.au>
1674 * configure.in (BFD_VERSION): Do without grep.
1675 * configure: Regenerate.
1676 * Makefile.am: Run "make dep-am".
1677 * Makefile.in: Regenerate.
1679 2001-02-23 David Mosberger <davidm@hpl.hp.com>
1681 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
1682 * ia64-asmtab.c: Regenerate.
1684 2001-02-21 David Mosberger <davidm@hpl.hp.com>
1686 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
1687 separate variants: one for IMM22 and the other for IMM14.
1688 * ia64-asmtab.c: Regenerate.
1690 2001-02-21 Greg McGary <greg@mcgary.org>
1692 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
1694 2001-02-20 H.J. Lu <hjl@gnu.org>
1696 * Makefile.am (ia64-ic.tbl): Remove the target.
1697 (ia64-raw.tbl): Likewise.
1698 (ia64-waw.tbl): Likewise.
1699 (ia64-war.tbl): Likewise.
1700 (ia64-asmtab.c): Generate it in the source directory.
1701 * Makefile.in: Regenerated.
1703 2001-02-18 lars brinkhoff <lars@nocrew.org>
1705 * Makefile.am: Add PDP-11 target.
1706 * configure.in: Likewise.
1707 * disassemble.c: Likewise.
1708 * pdp11-dis.c: New file.
1709 * pdp11-opc.c: New file.
1711 2001-02-14 Jim Wilson <wilson@redhat.com>
1713 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
1714 * ia64-asmtab.c: Regenerate.
1716 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
1718 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
1722 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
1724 * mips-dis.c (print_insn_arg): Use top four bits of the address of
1725 the following instruction not of the jump itself for the jump
1727 (print_mips16_insn_arg): Likewise.
1729 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1731 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
1733 * Makefile.in: Regenerate.
1735 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
1737 * Makefile.am: Add linux target for S/390.
1738 * Makefile.in: Likewise.
1739 * configure.in: Likewise.
1740 * disassemble.c: Likewise.
1741 * s390-dis.c: New file.
1742 * s390-mkopc.c: New file.
1743 * s390-opc.c: New file.
1744 * s390-opc.txt: New file.
1746 2001-02-05 Jim Wilson <wilson@redhat.com>
1748 * ia64-asmtab.c: Revert 2000-12-16 change.
1750 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
1752 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
1753 * m32r-desc.h: Regenerate.
1755 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
1757 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
1758 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
1760 2001-01-14 Alan Modra <alan@linuxcare.com.au>
1762 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
1764 2001-01-13 Nick Clifton <nickc@redhat.com>
1766 * disassemble.c: Remove spurious white space.
1768 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
1770 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
1773 2001-01-11 Peter Targett <peter.targett@arccores.com>
1775 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1776 * Makefile.am (C_FILES): Add arc-ext.c.
1777 (ALL_MACHINES) Add arc-ext.lo.
1778 (INCLUDES) Add opcode directory to list.
1779 New dependency entry for arc-ext.lo.
1780 * disassemble.c (disassembler): Correct call to
1781 arc_get_disassembler.
1782 * arc-opc.c: New update for ARC, including full base
1783 instructions for ARC variants.
1784 * arc-dis.h, arc-dis.c: New update for ARC, including
1785 extensibility functionality.
1786 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1788 2001-01-10 Jan Hubicka <jh@suse.cz>
1790 * i386-dis.c (PREGRP15 - PREGRP24): New.
1791 (dis386_twobyt): Add SSE2 instructions.
1792 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
1793 (twobyte_uses_f3_prefix): ... this one.
1794 (grps): Add SSE instructions.
1795 (prefix_user_table): Add two new slots; add SSE2 instructions.
1796 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
1797 Handle the REPNZ and Data16 prefixes as well; do proper lookup
1798 to prefix_user_table.
1799 (OP_E): Accept mfence and lfence as well.
1800 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
1801 (OP_XMM): Support REX extensions.
1805 2001-01-09 Nick Clifton <nickc@redhat.com>
1807 * arm-dis.c (print_insn): Set pc to zero for instructions with
1808 a reloc associated with them.
1810 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
1812 * cgen-asm.in (parse_insn_normal): Changed syn to be
1813 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
1814 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
1815 to '\0' to use 0 instead.
1816 * cgen-dis.in (print_insn_normal): Ditto.
1817 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
1819 2001-01-05 Jan Hubicka <jh@suse.cz>
1821 * i386-dis.c: Add x86_64 support.
1822 (rex): New static variable.
1823 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
1824 (USED_REX): New macro.
1825 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
1826 (OP_I64, OP_OFF64, OP_IMREG): New functions.
1827 (OP_REG, OP_OFF): Declare.
1828 (get64, get32, get32s): New functions.
1829 (r??_reg): New constants.
1830 (dis386_att): Change templates of instruction implicitly promoted
1831 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
1833 (dis386_intel): Likewise.
1834 (dixx86_64_att): New table based on dis386_att.
1835 (dixx86_64_intel): New table based on dis386_intel.
1836 (names64, names8rex): New global variable.
1837 (names32, names16): Add extended registers.
1838 (prefix_user_t): Recognize rex prefixes.
1839 (prefix_name): Print REX prefixes nicely.
1840 (op_riprel): New global variable.
1841 (start_pc): Set type to bfd_vma.
1842 (print_insn_i386): Detect the 64bit mode and use proper table;
1843 move ckprefix after initializing the buffer; output unused rex prefixes;
1844 output information about target of RIP relative addresses.
1845 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
1846 (print_operand_value): New function.
1847 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
1848 REX prefix and new modes.
1849 (get64, get32s): New.
1850 (get32): Return bfd_signed_vma type.
1851 (set_op): Initialize the op_riprel.
1852 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
1854 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
1856 cgen-dis.in (read_insn): Use bfd_get_bits()
1858 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
1860 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
1861 (hash_insn_list): Likewise
1862 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
1863 (extract_1): Use bfd_get_bits().
1864 (extract_normal): Apply sign extension to both extraction
1866 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
1867 (cgen_put_insn_value): Use bfd_put_bits()
1869 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
1871 * cgen-asm.in (parse_insn_normal): Print better error message for
1872 instructions with missing operands.
1874 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
1876 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
1878 2000-12-16 Nick Clifton <nickc@redhat.com>
1880 * Makefile.in: Regenerate.
1881 * aclocal.m4: Regenerate.
1882 * config.in: Regenerate.
1883 * configure.in: Add spacing.
1884 * configure: Regenerate.
1885 * ia64-asmtab.c: Regenerate.
1886 * po/opcodes.pot: Regenerate.
1888 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
1890 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
1891 error messages over later parse-time ones.
1893 2000-12-12 Jim Wilson <wilson@redhat.com>
1895 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
1897 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
1898 (print_dependency_table): Print NULL if semantics field not set.
1899 (insert_opcode_dependencies): Mark cmp parameter as unused.
1900 (print_main_table): Use fprintf_vma to print long long fields.
1901 (main): Mark argv paramter as unused. Convert to old style definition.
1902 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
1903 * ia64-asmtab.c: Regnerate.
1905 2000-12-09 Nick Clifton <nickc@redhat.com>
1907 * m32r-dis.c (print_insn): Prevent re-read of instruction from
1910 * fr30-dis.c: Regenerate.
1912 2000-12-08 Peter Targett <peter.targett@arccores.com>
1914 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
1915 * Makefile.am (C_FILES): Add arc-ext.c.
1916 (ALL_MACHINES) Add arc-ext.lo.
1917 (INCLUDES) Add opcode directory to list.
1918 New dependency entry for arc-ext.lo.
1919 * disassemble.c (disassembler): Correct call to
1920 arc_get_disassembler.
1921 * arc-opc.c: New update for ARC, including full base
1922 instructions for ARC variants.
1923 * arc-dis.h, arc-dis.c: New update for ARC, including
1924 extensibility functionality.
1925 * arc-ext.h, arc-ext.c: New files for handling extensibility.
1927 2000-12-03 Chris Demetriou cgd@sibyte.com
1929 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
1930 MOD_HILO, and MOD_LO macros.
1932 * mips-opc.c (M1, M2): Delete.
1933 (mips_builtin_opcodes): Remove all uses of M1.
1935 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
1936 instructions take "G" format second operands and use the
1938 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
1940 Delete "sel" code operands from mfc1 and mtc1.
1941 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
1944 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
1945 Chris Demetriou cgd@sibyte.com
1947 * mips-opc.c (mips_builtin_opcodes): Finish additions
1948 for MIPS32 support, and clean up existing entries for
1949 aesthetics, consistency with the MIPS32 ISA, and
1950 with consistency the rest of the table.
1952 2000-12-01 Nick Clifton <nickc@redhat.com>
1954 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
1957 2000-12-01 Chris Demetriou <cgd@sibyte.com>
1959 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
1960 specifiers. Update 'B' for new constant names, and remove
1962 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
1963 near the top of the array, so they are disassembled properly.
1964 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
1965 code for MIPS32. Update "clo" and "clz" to use 'U' operand
1966 specifier. Add 'H' format specifier variants for "mfc1,"
1967 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
1968 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
1969 "wait" variant which uses 'J' operand specifier.
1971 * mips-dis.c (set_mips_isa_type): Update to use
1972 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
1973 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
1974 * mips-opc.c (I32): New constant for instructions added in
1977 (mips_builtin_opcodes) Replace all uses of P4 with I32.
1979 * mips-dis.c (set_mips_isa_type): Add cases for
1980 bfd_mach_mips5 and bfd_mach_mips64.
1981 * mips-opc.c (I64): New definitions.
1983 * mips-dis.c (set_mips_isa_type): Add case for
1986 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
1988 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
1989 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
1990 Initialize variable dc to NULL.
1991 (print_insn_shx): Remove unused label d_reg_n.
1993 2000-11-24 Nick Clifton <nickc@redhat.com>
1995 * arm-opc.h: Add new opcode formatting parameter 'B'.
1996 (arm_opcodes): Add XScale, v5, and v5te instructions.
1997 (thumb_opcodes): Add v5t instructions.
1999 * arm-dis.c (print_insn_arm): Handle new 'B' format
2001 (print_insn_thumb): Decode BLX(1) instruction.
2003 2000-11-21 Chris Demetriou <cgd@sibyte.com>
2005 * mips-opc.c: Fix file header comment.
2007 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
2009 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
2010 print_insn_cris_with_register_prefix.
2012 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
2014 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
2016 2000-11-07 Matthew Green <mrg@redhat.com>
2018 * cgen-dis.in (print_insn): All insns which can fit into insn_value
2019 must be loaded there in their entirety.
2021 2000-10-20 Jakub Jelinek <jakub@redhat.com>
2023 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
2024 (compute_arch_mask): Add v8plusb and v9b machines.
2025 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
2026 * sparc-opc.c: Support for Cheetah instruction set.
2027 (prefetch_table): Add #invalidate.
2029 2000-10-16 Nick Clifton <nickc@redhat.com>
2031 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
2033 2000-10-06 Dave Brolley <brolley@redhat.com>
2035 * fr30-desc.h: Regenerate.
2036 * m32r-desc.h: Regenerate.
2037 * m32r-ibld.c: Regenerate.
2039 2000-10-05 Jim Wilson <wilson@redhat.com>
2041 * ia64-ic.tbl: Update from Intel.
2042 * ia64-asmtab.c: Regenerate.
2044 2000-10-04 Kazu Hirata <kazu@hxi.com>
2046 * ia64-gen.c: Convert C++-style comments to C-style comments.
2047 * tic54x-dis.c: Likewise.
2049 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
2051 Changes to add dollar prefix to registers for files where user symbols
2052 don't have a leading underscore. Fix formatting.
2053 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
2054 (format_reg): Add parameter with_reg_prefix. All callers changed.
2055 (print_with_operands): Ditto.
2056 (print_insn_cris_generic): Renamed from print_insn_cris, add
2057 parameter with_reg_prefix.
2058 (print_insn_cris_with_register_prefix,
2059 print_insn_cris_without_register_prefix, cris_get_disassembler):
2061 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
2063 2000-09-22 Jim Wilson <wilson@redhat.com>
2065 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
2066 gt, ge, ngt, and nge.
2067 * ia64-asmtab.c: Regenerate.
2069 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
2070 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
2071 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
2072 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
2073 * ia64-asmtab.c: Regnerate.
2075 2000-09-13 Anders Norlander <anorland@acc.umu.se>
2077 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
2078 Add mfc0 and mtc0 with sub-selection values.
2079 Add clo and clz opcodes.
2080 Add msub and msubu instructions for MIPS32.
2081 Add madd/maddu aliases for mad/madu for MIPS32.
2082 Support wait, deret, eret, movn, pref for MIPS32.
2083 Support tlbp, tlbr, tlbwi, tlbwr.
2086 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
2087 (print_insn_arg): Handle 'H' args.
2088 (set_mips_isa_type): Recognize 4K.
2089 Use CPU_* defines instead of hardcoded numbers.
2091 2000-09-11 Catherine Moore <clm@redhat.com>
2093 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
2094 (d30v_format_tab): Use Rb2 for modinc and moddec.
2096 2000-09-07 Catherine Moore <clm@redhat.com>
2098 * d30v-opc.c (d30v_format_tab): Use format Ra for
2101 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
2103 * configure: Rebuilt with new libtool.m4.
2105 2000-09-05 Nick Clifton <nickc@redhat.com>
2107 * configure: Regenerate.
2108 * po/opcodes.pot: Regenerate.
2110 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
2112 * acinclude.m4: Include libtool and gettext macros from the
2114 * aclocal.m4, configure: Rebuilt.
2116 2000-08-30 Kazu Hirata <kazu@hxi.com>
2118 * tic80-dis.c: Fix formatting.
2120 2000-08-29 Kazu Hirata <kazu@hxi.com>
2122 * w65-dis.c: Fix formatting.
2124 2000-08-28 Mark Hatle <mhatle@mvista.com>
2126 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
2127 (powerpc_opcodes): Add table entries for PPC 405 instructions.
2128 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
2129 instructions. Added extended mnemonic mftbl as defined in the
2130 405GP manual for all PPCs.
2132 2000-08-28 Jim Wilson <wilson@redhat.com>
2134 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
2135 call. Change last goto to use failed instead of done.
2137 2000-08-28 Dave Brolley <brolley@redhat.com>
2139 * cgen-ibld.in (cgen_put_insn_int_value): New function.
2140 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2141 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
2142 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
2143 * cgen-dis.in (read_insn): New static function.
2144 (print_insn): Use read_insn to read the insn into the buffer and set
2146 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
2148 * fr30-asm.c: Regenerated.
2149 * fr30-desc.c: Regenerated.
2150 * fr30-desc.h: Regenerated.
2151 * fr30-dis.c: Regenerated.
2152 * fr30-ibld.c: Regenerated.
2153 * fr30-opc.c: Regenerated.
2154 * fr30-opc.h: Regenerated.
2155 * m32r-asm.c: Regenerated.
2156 * m32r-desc.c: Regenerated.
2157 * m32r-desc.h: Regenerated.
2158 * m32r-dis.c: Regenerated.
2159 * m32r-ibld.c: Regenerated.
2160 * m32r-opc.c: Regenerated.
2162 2000-08-28 Kazu Hirata <kazu@hxi.com>
2164 * tic30-dis.c: Fix formatting.
2166 2000-08-27 Kazu Hirata <kazu@hxi.com>
2168 * sh-dis.c: Fix formatting.
2170 2000-08-24 David Edelsohn <dje@watson.ibm.com>
2172 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
2174 2000-08-24 Kazu Hirata <kazu@hxi.com>
2176 * z8k-dis.c: Fix formatting.
2178 2000-08-16 Jim Wilson <wilson@redhat.com>
2180 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
2181 break, mov-immediate, nop.
2182 * ia64-opc-f.c: Delete fpsub instructions.
2183 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
2184 address operand. Rewrite using macros to avoid long lines.
2185 * ia64-opc.h (POSTINC): Define.
2186 * ia64-asmtab.c: Regenerate.
2188 2000-08-15 Jim Wilson <wilson@redhat.com>
2190 * ia64-ic.tbl: Add missing entries.
2192 2000-08-08 Jason Eckhardt <jle@redhat.com>
2194 * i860-dis.c (print_br_address): Change third argument from int
2197 2000-08-07 Richard Henderson <rth@redhat.com>
2199 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
2200 for MLI templates. Handle IA64_OPND_TGT64.
2202 2000-08-04 Ben Elliston <bje@redhat.com>
2204 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
2205 * cgen.sh: Likewise.
2207 2000-08-02 Jim Wilson <wilson@redhat.com>
2209 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
2211 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
2213 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
2214 Change return type from void to int. Check the combination
2215 of operands, return 1 if valid. Fix to avoid BUF overflow.
2216 Report undefined combinations of operands in COMMENT.
2217 Report internal errors to stderr. Output the adiw/sbiw
2218 constant operand in both decimal and hex.
2219 (print_insn_avr): Disassemble ldd/std with displacement of 0
2220 as ld/st. Check avr_operand () return value, handle invalid
2221 combinations of operands like unknown opcodes.
2223 2000-07-28 Ben Elliston <bje@redhat.com>
2225 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
2226 (run-cgen, stamp-m32r, stamp-fr30): New targets.
2227 * Makefile.in: Regenerate.
2228 * configure.in: Add --enable-cgen-maint option.
2229 * configure: Regenerate.
2231 2000-07-26 Dave Brolley <brolley@redhat.com>
2233 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
2234 (cgen_hw_lookup_by_num): Ditto.
2235 (cgen_operand_lookup_by_name): Ditto.
2236 (print_address): Ditto.
2237 (print_keyword): Ditto.
2238 * cgen-dis.c (hash_insn_array): Mark unused parameters with
2240 * cgen-asm.c (hash_insn_array): Mark unused parameters with
2242 (cgen_parse_keyword): Ditto.
2244 2000-07-22 Jason Eckhardt <jle@redhat.com>
2246 * i860-dis.c: New file.
2247 (print_insn_i860): New function.
2248 (print_br_address): New function.
2249 (sign_extend): New function.
2250 (BITWISE_OP): New macro.
2251 (I860_REG_PREFIX): New macro.
2252 (grnames, frnames, crnames): New structures.
2254 * disassemble.c (ARCH_i860): Define.
2255 (disassembler): Add check for bfd_arch_i860 to set disassemble
2256 function to print_insn_i860.
2258 * Makefile.in (CFILES): Added i860-dis.c.
2259 (ALL_MACHINES): Added i860-dis.lo.
2260 (i860-dis.lo): New dependences.
2262 * configure.in: New bits for bfd_i860_arch.
2264 * configure: Regenerated.
2266 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
2268 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
2269 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
2270 (cris-dis.lo, cris-opc.lo): New rules.
2271 * Makefile.in: Rebuild.
2272 * configure.in (bfd_cris_arch): New target.
2273 * configure: Rebuild.
2274 * disassemble.c (ARCH_cris): Define.
2275 (disassembler): Support ARCH_cris.
2276 * cris-dis.c, cris-opc.c: New files.
2277 * po/POTFILES.in, po/opcodes.pot: Regenerate.
2279 2000-07-11 Jakub Jelinek <jakub@redhat.com>
2281 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
2282 Reported by Bill Clarke <llib@computer.org>.
2284 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
2286 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
2287 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
2289 2000-07-09 Alan Modra <alan@linuxcare.com.au>
2291 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
2292 fput_const, extract_3, extract_5_load, extract_5_store,
2293 extract_5r_store, extract_5R_store, extract_10U_store,
2294 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
2295 extract_12, extract_17, extract_22): Prototype.
2296 (print_insn_hppa): Rename inner block opcode -> opc to avoid
2297 shadowing outer block.
2300 2000-07-05 DJ Delorie <dj@redhat.com>
2304 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
2306 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
2308 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
2310 * avr-dis.c (avr_operand): Change _ () to _() around all strings
2311 marked for translation (exception from the usual coding style).
2312 (print_insn_avr): Initialize insn2 to avoid warnings.
2314 2000-07-03 Kazu Hirata <kazu@hxi.com>
2316 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
2317 * h8500-dis.c: Fix formatting.
2319 2000-07-01 Alan Modra <alan@linuxcare.com.au>
2321 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
2322 (CLEANFILES): Add DEPA.
2323 * Makefile.in: Regenerate.
2325 2000-06-26 Scott Bambrough <scottb@netwinder.org>
2327 * arm-dis.c (regnames): Add an additional register set to match
2328 the set used by GCC. Make it the default.
2330 2000-06-22 Alan Modra <alan@linuxcare.com.au>
2332 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
2334 * Makefile.in: Regenerate.
2336 2000-06-20 H.J. Lu <hjl@gnu.org>
2338 * Makefile.am: Rebuild dependency.
2339 * Makefile.in: Rebuild.
2341 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
2343 * Makefile.in, configure: regenerate
2344 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
2346 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
2348 * configure.in: Recognize m68hc12 and m68hc11.
2349 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
2350 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
2351 and opcode generation for m68hc11 and m68hc12.
2353 2000-06-16 Nick Duffek <nsd@redhat.com>
2355 * disassemble.c (disassembler): Refer to the PowerPC 620 using
2356 bfd_mach_ppc_620 instead of 620.
2358 2000-06-12 Kazu Hirata <kazu@hxi.com>
2360 * h8300-dis.c: Fix formatting.
2361 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
2364 2000-06-09 Denis Chertykov <denisc@overta.ru>
2366 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
2368 2000-06-07 Denis Chertykov <denisc@overta.ru>
2370 * avr-dis.c: completely rewritten.
2372 2000-06-02 Kazu Hirata <kazu@hxi.com>
2374 * h8300-dis.c: Follow the GNU coding style.
2375 (bfd_h8_disassemble) Fix a typo.
2377 2000-06-01 Kazu Hirata <kazu@hxi.com>
2379 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
2380 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
2381 correctly. Fix a typo.
2383 2000-05-31 Nick Clifton <nickc@redhat.com>
2385 * opintl.h (_(String)): Explain why dgettext is used instead of
2388 2000-05-30 Nick Clifton <nickc@redhat.com>
2390 * opintl.h (gettext, dgettext, dcgettext, textdomain,
2391 bindtextdomain): Replace defines with those from intl/libgettext.h
2392 to quieten gcc warnings.
2394 2000-05-26 Alan Modra <alan@linuxcare.com.au>
2396 * Makefile.am: Update dependencies with "make dep-am"
2397 * Makefile.in: Regenerate.
2399 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
2401 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
2402 sign-extending operands.
2404 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
2406 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
2409 2000-05-21 Nick Clifton <nickc@redhat.com>
2411 * Makefile.am (LIBIBERTY): Define.
2413 2000-05-19 Diego Novillo <dnovillo@redhat.com>
2415 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
2416 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
2417 (reg_names): Rename to std_reg_names. Change it to a char **
2419 (std_reg_names): New name for reg_names.
2420 (set_mips_isa_type): Set reg_names to point to std_reg_names by
2423 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
2425 * fr30-desc.h: Partially regenerated to account for changed
2426 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
2427 * m32r-desc.h: Ditto.
2429 2000-05-15 Nick Clifton <nickc@redhat.com>
2431 * arm-opc.h: Use upper case for flasg in MSR and MRS
2432 instructions. Allow any bit to be set in the field_mask of
2433 the MSR instruction.
2435 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
2436 field_mask of an MSR instruction.
2438 2000-05-11 Thomas de Lellis <tdel@windriver.com>
2440 * arm-opc.h: Disassembly of thumb ldsb/ldsh
2441 instructions changed to ldrsb/ldrsh.
2443 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
2445 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
2446 target addresses for 'jal' and 'j'.
2448 2000-05-10 Geoff Keating <geoffk@redhat.com>
2450 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
2451 also available in common mode when powerpc syntax is being used.
2453 2000-05-08 Alan Modra <alan@linuxcare.com.au>
2455 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
2456 (dummy_print_address): Ditto.
2458 2000-05-04 Timothy Wall <twall@redhat.com>
2460 * tic54x-opc.c: New.
2461 * tic54x-dis.c: New.
2462 * disassemble.c (disassembler): Add ARCH_tic54x.
2463 * configure.in: Added tic54x target.
2465 * Makefile.am: Add tic54x dependencies.
2466 * Makefile.in: Ditto.
2468 2000-05-03 J.T. Conklin <jtc@redback.com>
2470 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
2471 vector unit operands.
2472 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
2473 unit instruction formats.
2474 (PPCVEC): New macro, mask for vector instructions.
2475 (powerpc_operands): Add table entries for above operand types.
2476 (powerpc_opcodes): Add table entries for vector instructions.
2478 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
2479 (print_insn_little_powerpc): Likewise.
2480 (print_insn_powerpc): Prepend 'v' when printing vector registers.
2482 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
2484 * configure.in: Add bfd_powerpc_64_arch.
2485 * disassemble.c (disassembler): Use print_insn_big_powerpc for
2488 2000-04-24 Nick Clifton <nickc@redhat.com>
2490 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
2493 2000-04-23 Denis Chertykov <denisc@overta.ru>
2495 * avr-dis.c (reg_fmul_d): New. Extract destination register from
2497 (reg_fmul_r): New. Extract source register from FMUL instruction.
2498 (reg_muls_d): New. Extract destination register from MULS instruction.
2499 (reg_muls_r): New. Extract source register from MULS instruction.
2500 (reg_movw_d): New. Extract destination register from MOVW instruction.
2501 (reg_movw_r): New. Extract source register from MOVW instruction.
2502 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
2503 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
2505 2000-04-22 Timothy Wall <twall@redhat.com>
2507 * ia64-gen.c (general): Add an ordered table of primary
2508 opcode names, as well as priority fields to disassembly data
2509 structures to enforce a preferred disassembly format based on the
2510 ordering of the opcode tables.
2511 (load_insn_classes): Show a useful message if IC tables are missing.
2512 (load_depfile): Ditto.
2513 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
2514 distinguish preferred disassembly.
2515 * ia64-opc-f.c: Reorder some insn for preferred disassembly
2516 format. Fix incorrect flag on fma.s/fma.s.s0.
2517 * ia64-opc.c: Scan *all* disassembly matches and use the one with
2518 the highest priority.
2519 * ia64-opc-b.c: Use more abbreviations.
2520 * ia64-asmtab.c: Regenerate.
2522 2000-04-21 Jason Eckhardt <jle@redhat.com>
2524 * hppa-dis.c (extract_16): New function.
2525 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
2526 new operand types l,y,&,fe,fE,fx.
2528 2000-04-21 Richard Henderson <rth@redhat.com>
2529 David Mosberger <davidm@hpl.hp.com>
2530 Timothy Wall <twall@redhat.com>
2531 Bob Manson <manson@charmed.cygnus.com>
2532 Jim Wilson <wilson@redhat.com>
2534 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
2535 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
2536 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
2538 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
2539 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
2540 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
2541 * Makefile.in: Rebuild.
2542 * configure Rebuild.
2543 * configure.in (bfd_ia64_arch): New target.
2544 * disassemble.c (ARCH_ia64): Define.
2545 (disassembler): Support ARCH_ia64.
2546 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
2547 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
2548 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
2549 ia64-war.tbl, ia64-waw.tbl: New files.
2551 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
2553 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
2554 (disassemble): Use them.
2556 2000-04-14 Alan Modra <alan@linuxcare.com.au>
2558 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
2559 * Makefile.am: Update dependencies.
2560 * Makefile.in: Regenerate.
2562 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
2564 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
2565 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
2566 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
2567 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
2568 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
2569 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
2570 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
2571 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
2572 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
2573 ansidecl.h as sysdep.h includes it.
2575 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
2577 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
2578 --enable-build-warnings option.
2579 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
2580 * Makefile.in, configure: Re-generate.
2582 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
2584 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
2585 stc GBR,@-<REG_N> is available for arch_sh1_up.
2586 Group parallel processing insn with identical mnemonics together.
2587 Make three-operand psha / pshl come first.
2589 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
2591 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
2592 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2593 (sh_arg_type): Add A_PC.
2594 (sh_table): Update entries using immediates. Add repeat.
2595 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
2596 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
2598 2000-04-04 Alan Modra <alan@linuxcare.com.au>
2600 * po/opcodes.pot: Regenerate.
2602 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
2603 (DEP): Quote when passing vars to sub-make. Add warning message
2605 (DEP1): Rewrite for "gcc -MM".
2606 (CLEANFILES): Add DEP2.
2607 Update dependencies.
2608 * Makefile.in: Regenerate.
2610 2000-04-03 Denis Chertykov <denisc@overta.ru>
2612 * avr-dis.c: Syntax cleanup.
2613 (add0fff): Print the pc relative address as a signed number.
2614 (add03f8): Likewise.
2616 2000-04-01 Ian Lance Taylor <ian@zembu.com>
2618 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
2619 the parameter ATTRIBUTE_UNUSED.
2620 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
2622 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
2624 * m10300-opc.c: SP-based offsets are always unsigned.
2626 2000-03-29 Thomas de Lellis <tdel@windriver.com>
2628 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
2629 [branch always] instead of "undefined".
2631 2000-03-27 Nick Clifton <nickc@redhat.com>
2633 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
2634 short instructions, from end of list of long instructions.
2636 2000-03-27 Ian Lance Taylor <ian@zembu.com>
2638 * Makefile.am (CFILES): Add avr-dis.c.
2639 (ALL_MACHINES): Add avr-dis.lo.
2641 2000-03-27 Alan Modra <alan@linuxcare.com>
2643 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
2645 (print_insn_avr): Call function via pointer in K&R compatible way.
2646 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
2647 add0fff, add03f8): Convert to old style function declaration and
2649 (avrdis_opcode): Add prototype.
2651 2000-03-27 Denis Chertykov <denisc@overta.ru>
2653 * avr-dis.c: New file. AVR disassembler.
2654 * configure.in (bfd_avr_arch): New architecture support.
2655 * disassemble.c: Likewise.
2656 * configure: Regenerate.
2658 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
2660 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
2662 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
2664 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
2665 flag to determine if operand is pc-relative.
2667 (d30v_format_table):
2668 (REL6S3): Renamed from IMM6S3.
2669 Added flag OPERAND_PCREL.
2670 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
2671 added flag OPERAND_PCREL.
2672 (IMM12S3U): Replaced with REL12S3.
2673 (SHORT_D2, LONG_D): Delay target is pc-relative.
2674 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
2675 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
2676 using the REL* operands.
2677 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
2678 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
2679 LONG_Db, using REL* operands.
2680 (SHORT_U, SHORT_A5S): Removed stray alternatives.
2681 (d30v_opcode_table): Use new *r formats.
2683 2000-02-28 Nick Clifton <nickc@redhat.com>
2685 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
2686 'signed_overflow_ok_p'.
2688 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
2690 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
2691 name of the libtool directory.
2692 * Makefile.in: Rebuild.
2694 2000-02-24 Nick Clifton <nickc@redhat.com>
2696 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
2697 (cgen_clear_signed_overflow_ok): New function.
2698 (cgen_signed_overflow_ok_p): New function.
2700 2000-02-23 Andrew Haley <aph@redhat.com>
2702 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
2703 m32r-ibld.c, m32r-opc.h: Rebuild.
2705 2000-02-23 Linas Vepstas <linas@linas.org>
2707 * i370-dis.c, i370-opc.c: New.
2709 * disassemble.c (ARCH_i370): Define.
2710 (disassembler): Handle it.
2712 * Makefile.am: Add support for Linux/IBM 370.
2713 * configure.in: Likewise.
2715 * Makefile.in: Regenerate.
2716 * configure: Likewise.
2718 2000-02-22 Chandra Chavva <cchavva@redhat.com>
2720 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
2721 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
2724 2000-02-22 Andrew Haley <aph@redhat.com>
2726 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
2728 * mips-opc.c (G6): New define.
2729 (mips_builtin_op): Add "move" definition for -gp32.
2731 2000-02-22 Ian Lance Taylor <ian@zembu.com>
2733 From Grant Erickson <gerickso@Brocade.COM>:
2734 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
2736 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
2738 * dis-buf.c (buffer_read_memory): Change `length' param and all int
2741 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
2743 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
2744 (print_insn_ppi): Likewise.
2745 (print_insn_shx): Use info->mach to select appropriate insn set.
2746 Add support for sh-dsp. Remove FD_REG_N support.
2747 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
2748 (sh_arg_type): Likewise. Remove FD_REG_N.
2749 (sh_dsp_reg_nums): New enum.
2750 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
2751 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
2752 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
2753 (arch_sh3_dsp_up): Likewise.
2754 (sh_opcode_info): New field: arch.
2755 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
2756 D_REG_N. Fill in arch field. Add sh-dsp insns.
2758 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
2760 * arm-dis.c: Change flavor name from atpcs-special to
2761 special-atpcs to prevent name conflict in gdb.
2762 (get_arm_regname_num_options, set_arm_regname_option,
2763 get_arm_regnames): New functions. API to access the several
2764 flavor of register names. Note: Used by gdb.
2765 (print_insn_thumb): Use the register name entry from the currently
2766 selected flavor for LR and PC.
2768 2000-02-10 Nick Clifton <nickc@redhat.com>
2770 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
2772 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
2773 "mulsh.h" instructions.
2774 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
2776 (print_insn_mcore): Add support for little endian targets.
2777 Add support for MULSH and OPSR classes.
2779 2000-02-07 Nick Clifton <nickc@redhat.com>
2781 * arm-dis.c (parse_arm_diassembler_option): Rename again.
2782 Previous delat did not take.
2784 2000-02-03 Timothy Wall <twall@redhat.com>
2786 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
2787 to adjust target address bounds checking and calculate the
2788 appropriate octet offset into data.
2790 2000-01-27 Nick Clifton <nickc@redhat.com>
2792 * arm-dis.c: (parse_disassembler_option): Rename to
2793 parse_arm_disassembler_option and allow to be exported.
2795 * disassemble.c (disassembler_usage): New function: Print out any
2796 target specific disassembler options.
2797 Call arm_disassembler_options() if the ARM architecture is being
2800 * arm-dis.c (NUM_ELEM): Define this macro if not already
2802 (arm_regname): New struct type for ARM register names.
2803 (arm_toggle_regnames): Delete.
2804 (parse_disassembler_option): Use register name structure.
2805 (print_insn): New function: Combines duplicate code found in
2806 print_insn_big_arm and print_insn_little_arm.
2807 (print_insn_big_arm): Call print_insn.
2808 (print_insn_little_arm): Call print_insn.
2809 (print_arm_disassembler_options): Display list of supported,
2810 ARM specific disassembler options.
2812 2000-01-27 Thomas de Lellis <tdel@windriver.com>
2814 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
2815 ARM_STT_16BIT flag as Thumb code symbols.
2817 * arm-dis.c (printf_insn_little_arm): Ditto.
2819 2000-01-25 Thomas de Lellis <tdel@windriver.com>
2821 * arm-dis.c (printf_insn_thumb): Prevent double dumping
2822 of raw thumb instructions.
2824 2000-01-20 Nick Clifton <nickc@redhat.com>
2826 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
2828 2000-01-03 Nick Clifton <nickc@cygnus.com>
2830 * arm-dis.c (streq): New macro.
2831 (strneq): New macro.
2832 (force_thumb): ew local variable.
2833 (parse_disassembler_option): New function: Parse a single, ARM
2834 specific disassembler command line switch.
2835 (parse_disassembler_option): Call parse_disassembler_option to
2836 parse individual command line switches.
2837 (print_insn_big_arm): Check force_thumb.
2838 (print_insn_little_arm): Check force_thumb.
2840 For older changes see ChangeLog-9899
2846 version-control: never
projects / platform / upstream / binutils.git / blob