1 1999-09-07 Nick Clifton <nickc@cygnus.com>
3 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
4 names for the mulu and muls patterns.
6 1999-09-04 Steve Chamberlain <sac@pobox.com>
10 * disassemble.c (disassembler): Handle bfd_arch_pj.
11 * configure.in: Handle bfd_pj_arch.
12 * Makefile.am: Rebuild dependencies.
13 (CFILES): Add pj-dis.c and pj-opc.c.
14 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
15 * configure, Makefile.in: Rebuild.
17 1999-09-04 H.J. Lu <hjl@gnu.org>
19 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
21 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
23 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
25 1999-08-04 Doug Evans <devans@casey.cygnus.com>
27 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
28 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
29 * m32r-opinst.c: Rebuild.
31 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
33 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
36 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
38 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
39 extract_10U_store): New.
40 (print_insn_hppa): Add new completers.
42 * hppa-dis.c (signed_unsigned_names,mix_half_names,
43 saturation_names): New.
44 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
46 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
48 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
50 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
51 to decide to print a space.
53 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
55 * i386-dis.c: Add AMD athlon instruction support.
57 1999-08-10 Ian Lance Taylor <ian@zembu.com>
59 From Wally Iimura <iimura@microunity.com>:
60 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
61 overflow at end of address space.
62 (generic_print_address): Use sprintf_vma.
64 1999-08-08 Ian Lance Taylor <ian@zembu.com>
66 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
67 MKDEP. Rebuild dependencies.
68 * Makefile.in: Rebuild.
70 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
72 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
73 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
74 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
75 (print_insn_hppa): Add 64 bit condition completers.
77 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
79 * hppa-dis.c (print_insn_hppa): Change condition args to use
82 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
84 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
87 1999-07-21 Ian Lance Taylor <ian@zembu.com>
90 * configure.bat: Remove; obsolete.
92 1999-07-11 Ian Lance Taylor <ian@zembu.com>
94 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
95 (generic_strcat_address): Add cast to avoid warning.
96 * i386-dis.c: Initialize all structure fields to avoid warnings.
97 Add ATTRIBUTE_UNUSED as appropriate.
99 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
101 * sparc-dis.c (print_insn_sparc): Differentiate between
102 addition and oring when guessing symbol for comment.
104 1999-07-05 Nick Clifton <nickc@cygnus.com>
106 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
109 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
111 * i386-dis.c: Mention intel mode specials in macro char comment.
113 1999-06-21 Ian Lance Taylor <ian@zembu.com>
115 * alpha-dis.c: Don't include <stdlib.h>.
116 * arm-dis.c: Include "sysdep.h".
117 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
119 * Makefile.am: Rebuild dependencies.
120 * Makefile.in: Rebuild.
122 1999-06-16 Nick Clifton <nickc@cygnus.com>
124 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
127 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
129 * arm-dis.c (arm_regnames): Turn into a pointer to a register
131 (arm_regnames_standard): New variable: Array of ARM register
132 names according to ARM instruction set nomenclature.
133 (arm_regnames_apcs): New variable: Array of ARM register names
134 according to ARM Procedure Call Standard.
135 (arm_regnames_raw): New variable: Array of ARM register names
136 using just 'r' and the register number.
137 (arm_toggle_regnames): New function: Toggle the chosen register set
139 (parse_disassembler_options): New function: Parse any target
140 disassembler command line options.
141 (print_insn_big_arm): Call parse_disassembler_options if any
143 (print_insn_little_arm): Call parse_disassembler_options if any
146 1999-06-13 Ian Lance Taylor <ian@zembu.com>
148 * i386-dis.c (FWAIT_OPCODE): Define.
149 (used_prefixes): New static variable.
150 (fetch_data): Don't print an error message if we have already
151 fetched some bytes successfully.
152 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
153 (prefix_name): New static function.
154 (print_insn_i386): If setjmp fails, indicating a data error, but
155 we have managed to fetch some bytes, print the first one as a
156 prefix or a .byte pseudo-op. If fwait is followed by a non
157 floating point instruction, print the first prefix. Set
158 used_prefixes when prefixes are used. If any prefixes were not
159 used after disassembling the instruction, print the first prefix
160 instead of printing the instruction.
161 (putop): Set used_prefixes when prefixes are used.
162 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
163 (OP_DIR, OP_SIMD_Suffix): Likewise.
165 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
167 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
168 Support signx %reg, clruw %reg.
170 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
172 * sparc-opc.c: Add aliases Solaris as supports.
174 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
176 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
177 * Makefile.in: Regenerated.
179 1999-06-03 Philip Blundell <philb@gnu.org>
181 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
182 when target is PC-relative.
184 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
186 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
189 * m68k-dis.c (fetch_arg): Add places `n', `o'.
191 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
192 Add mcf5206e to appropriate instructions.
193 Add alias for MAC, MSAC.
195 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
198 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
199 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
201 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
203 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
205 * i386-dis.c (Ed): Define.
206 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
208 (OP_rm): Rename to OP_Rd.
211 (putop): Add const to template and p.
212 (print_insn_x86): Delete.
213 (print_insn_i386): Merge old function print_insn_x86. Add const
215 (struct dis386): Add const to name.
216 (dis386_att, dis386_intel): Add const.
217 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
218 (names32, names16, names8, names_seg, index16): Add const.
219 (grps, prefix_user_table, float_reg): Add const.
220 (float_mem_att, float_mem_intel): Add const.
221 (oappend): Add const to s.
222 (OP_REG): Add const to s.
223 (ptr_reg): Add const to s.
224 (dofloat): Add const to dp.
225 (OP_C): Don't skip modrm, it's now done in OP_Rd.
228 (OP_Rd): Check for valid mod. Call Op_E to print.
229 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
230 (OP_MS): Check for valid mod. Call Op_EM to print.
231 (OP_3DNowSuffix): Set obufp and use oappend rather than
232 strcat. Call BadOp() for errors.
233 (OP_SIMD_Suffix): Likewise.
234 (BadOp): New function.
236 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
238 * i386-dis.c (dis386_intel): Remove macro chars, except for
239 jEcxz. Change cWtR and cRtd to cW and cR.
240 (dis386_twobyte_intel): Remove macro chars here too.
241 (putop): Handle R and W macros for intel mode.
243 * i386-dis.c (SIMD_Fixup): New function.
244 (dis386_twobyte_att): Use it on movlps and movhps, and change
245 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
246 (dis386_twobyte_intel): Same here.
248 * i386-dis.c (Av): Remove.
252 (OP_SIMD_Suffix): New function.
253 (OP_DIR): Remove dead code.
254 (eAX_reg..eDI_reg): Renumber.
255 (onebyte_has_modrm): Table numbering comments.
256 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
257 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
258 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
259 and handle SIMD cmp insns in OP_SIMD_Suffix.
260 (info->bytes_per_line): Bump from 5 to 6.
262 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
263 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
265 PIII SIMD support from Doug Ledford <dledford@redhat.com>
266 * i386-dis.c (XM, EX, None): Define.
267 (OP_XMM, OP_EX, OP_None): New functions.
268 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
269 (GRP14): Rename to GRPAMD.
270 (GRP*): Add USE_GROUPS flag.
272 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
273 (twobyte_has_modrm): Add SIMD entries.
274 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
275 (grps): Add SIMD insns.
276 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
277 oappend repz if uses_f3_prefix. Add code to handle new groups for
280 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
281 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
282 operand from Av to Jv.
284 1999-05-07 Nick Clifton <nickc@cygnus.com>
286 * mcore-dis.c (print_insn_mcore): Use .short to display
287 unidentified instructions, not .word.
289 1999-04-26 Tom Tromey <tromey@cygnus.com>
291 * aclocal.m4, configure: Updated for new version of libtool.
293 1999-04-14 Doug Evans <devans@casey.cygnus.com>
295 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
296 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
298 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
300 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
303 1999-04-10 Doug Evans <devans@casey.cygnus.com>
305 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
306 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
308 1999-04-06 Ian Lance Taylor <ian@zembu.com>
310 * opintl.h (LC_MESSAGES): Never define.
312 1999-04-04 Ian Lance Taylor <ian@zembu.com>
314 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
315 (separator_char, scale_char): Likewise.
316 (print_insn_x86): Likewise.
317 (print_insn_i386): Likewise. Add declaration.
319 1999-03-26 Doug Evans <devans@casey.cygnus.com>
321 * fr30-dis.c: Rebuild.
322 * m32r-dis.c: Rebuild.
324 1999-03-23 Ian Lance Taylor <ian@zembu.com>
326 * m68k-opc.c: Change compare instructions to use "@s" rather than
327 ";s" when used with an immediate operand.
329 1999-03-22 Doug Evans <devans@casey.cygnus.com>
331 * cgen-opc.c (cgen_set_cpu): Delete.
332 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
333 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
335 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
337 * po/opcodes.pot: Rebuild.
339 1999-03-16 Martin Hunt <hunt@cygnus.com>
341 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
343 1999-03-11 Doug Evans <devans@casey.cygnus.com>
345 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
346 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
347 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
348 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
349 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
350 * m32r-opinst.c: Rebuild.
352 1999-02-25 Doug Evans <devans@casey.cygnus.com>
354 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
355 (cgen_hw_lookup_by_num): Rewrite.
356 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
357 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
358 * m32r-opinst.c: Rebuild.
360 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
362 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
363 (insert_jhint): Fix insertion mask.
364 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
366 1999-02-10 Doug Evans <devans@casey.cygnus.com>
368 * Makefile.in: Rebuild.
370 1999-02-09 Doug Evans <devans@casey.cygnus.com>
372 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
373 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
374 * Makefile.am: Remove references to them.
375 (HFILES): Add fr30-desc.h,m32r-desc.h.
376 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
378 (ALL_MACHINES): Update.
379 * configure.in: Redo handling of cgen_files.
380 (bfd_i960_arch): Delete i960c-*.lo files.
381 * configure: Regenerate.
382 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
383 (hash_insn_array): Rewrite.
384 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
385 (hash_insn_array): Rewrite.
386 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
387 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
388 (cgen_lookup_get_insn_operands): Ditto.
389 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
390 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
391 * po/POTFILES.in: Rebuild.
392 * po/opcodes.pot: Rebuild.
394 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
396 * Makefile.am: Rebuild dependencies.
397 (HFILES): Add fr30-opc.h.
398 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
399 * Makefile.in: Rebuild.
401 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
402 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
404 * acconfig.h: Remove.
405 * configure: Rebuild with current autoconf/automake.
406 * aclocal.m4: Likewise.
407 * config.in: Likewise.
408 * Makefile.in: Likewise.
410 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
412 * m68k-opc.c: Correct move (not movew) to status word on 5200.
414 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
416 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
417 * i386-dis.c (x_mode): Define.
421 (dis386_twobyte): Remove.
422 (dis386_twobyte_att): New.
423 (dis386_twobyte_intel): New.
424 (print_insn_x86): Use new arrays.
426 (float_mem_intel): New.
427 (float_mem_att): New.
428 (dofloat): Use new float_mem arrays.
429 (print_insn_i386_att): New.
430 (print_insn_i386_intel): New.
431 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
432 (putop): Handle intel syntax.
433 (OP_indirE): Handle intel syntax.
434 (OP_E): Handle intel syntax.
435 (OP_I): Handle intel syntax.
436 (OP_sI): Handle intel syntax.
437 (OP_OFF): Handle intel syntax.
441 1999-01-27 Doug Evans <devans@casey.cygnus.com>
443 * fr30-opc.h,fr30-opc.c: Rebuild.
444 * i960c-opc.h,i960c-opc.c: Rebuild.
445 * m32r-opc.c: Rebuild.
447 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
449 * hppa-dis.c: revert HP merge changes until HP gives us
452 1999-01-19 Nick Clifton <nickc@cygnus.com>
454 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
455 offsets as well as symbloic address.
457 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
459 * hppa-dis.c: fix comments and some indentation.
461 1999-01-12 Doug Evans <devans@casey.cygnus.com>
463 * fr30-opc.c,i960c-opc.c: Regenerate.
465 1999-01-11 Doug Evans <devans@casey.cygnus.com>
467 * fr30-opc.c: Regenerate.
469 1999-01-06 Doug Evans <devans@casey.cygnus.com>
471 * m32r-dis.c: Regenerate.
473 1999-01-05 Doug Evans <devans@casey.cygnus.com>
475 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
476 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
477 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
479 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
481 * configure.in: Require autoconf 2.12.1 or higher.
483 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
485 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
487 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
489 * fr30-opc.c: Regenerated.
491 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
493 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
495 1998-12-15 Dave Brolley <brolley@cygnus.com>
497 * fr30-opc.c,fr30-opc.h: Regenerated.
499 1998-12-14 Dave Brolley <brolley@cygnus.com>
501 * fr30-opc.c,fr30-opc.h: Regenerated.
503 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
505 * fr30-opc.c,fr30-opc.h: Regenerated.
507 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
509 * m32r-opc.c: Regenerate.
511 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
513 * dis-buf.c (generic_strcat_address): reformat to GNU coding
514 conventions. change sprintf call to an sprintf_vma call.
516 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
518 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
520 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
522 The following changes were made by
523 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
524 David Taylor <taylor@texas.cygnus.com>, and
525 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
526 merge in changes by HP; HP did not create ChangeLog entries.
528 * dis-buf.c (generic_strcat_address): new function.
530 * hppa-dis.c: Changes to improve hppa disassembly.
531 Changed formatting in : reg_names, fp_reg_names,control_reg,
532 New variables : sign_extension_names, deposit_names, conversion_names
533 float_test_names, compare_cond_names_double, add_cond_names_double,
534 logical_cond_names_double, unit_cond_names_double,
535 branch_push_pop_names, saturation_names, shift_names, mix_names,
536 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
537 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
538 (fput_const): renamed as fput_hex_const
540 - use the macros fputs_filtered and
541 fput_decimal_const whenever possible; calls to sign_extend require
542 2 params -- add a missing second param of 0.
543 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
544 architecture version number of current machine. HP folks are
545 trying to handle situation where the target program was compiled
546 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
548 - added new cases : 'g', 'B', 'm'
549 - added cases specifically for PA 2.0
550 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
551 - calls to fput_const become calls to fput_hex_const
553 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
555 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
556 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
557 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
558 * Makefile.in: Rebuilt.
559 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
561 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
562 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
564 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
566 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
568 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
570 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
572 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
573 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
575 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
577 * fr30-opc.c: Regenerate.
579 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
581 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
583 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
585 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
587 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
589 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
591 1998-11-30 Doug Evans <devans@casey.cygnus.com>
593 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
594 CGEN_INSN_BASE_VALUE.
595 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
596 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
598 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
600 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
602 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
604 * fr30-asm.c,fr30-dis.c: Regenerated.
606 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
608 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
610 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
612 * fr30-opc.c: Regenerated.
614 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
616 * fr30-opc.c: Regenerated.
617 * fr30-opc.h: Regenerated.
618 * fr30-dis.c: Regenerated.
619 * fr30-asm.c: Regenerated.
621 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
623 * mips-opc.c (sync.p,sync.l): Swap insn values.
625 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
627 * fr30-opc.c: Regenerate.
629 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
631 * fr30-opc.c: Regenerated.
632 * fr30-opc.h: Regenerated.
634 1998-11-18 Doug Evans <devans@casey.cygnus.com>
636 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
637 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
639 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
641 * fr30-opc.c: Regenerated.
643 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
645 * fr30-opc.c: Regenerated.
646 * fr30-opc.h: Regenerated.
647 * fr30-dis.c: Regenerated.
648 * fr30-asm.c: Regenerated.
650 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
652 * po/opcodes.pot: Regenerated.
653 * fr30-opc.c: Regenerated.
654 * fr30-opc.h: Regenerated.
655 * fr30-dis.c: Regenerated.
656 * fr30-asm.c: Regenerated.
658 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
660 * disassemble.c (disassembler): Add support for FR30 target.
662 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
664 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
665 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
667 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
669 * po/opcodes.pot: Regenerate.
670 * po/POTFILES.in: Regenerate.
671 * fr30-opc.c: Regenerate.
672 * fr30-opc.h: Regenerate.
674 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
676 * m32r-asm.c: Regenerate.
678 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
680 * configure.in: Added case for bfd_fr30_arch.
681 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
682 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
683 (CLEANFILES): Added stamp-fr30.
685 * fr30-asm.c: New file.
686 * fr30-dis.c: New file.
687 * fr30-opc.c: New file.
688 * fr30-opc.h: New file.
689 * po/POTFILES.in: Regenerated
690 * po/opcodes.pot: Regenerated
692 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
694 * configure.in: detect cygwin* instead of cygwin32*
695 * configure: regenerate
697 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
699 * mips-opc.c (IS_M): Added.
701 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
703 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
705 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
707 * m32r-opc.h,m32r-opc.c: Regenerate.
709 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
711 * i386-dis.c (OP_3DNowSuffix): New static function.
714 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
715 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
716 (insn_codep): New static variable.
717 (print_insn_x86): Init insn_codep after prefixes.
718 (grps): Add GRP14 entries for prefetch, prefetchw.
721 From Jeff B Epler <jepler@usgs.gov>
722 * i386-dis.c (Suffix3DNow): New table.
724 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
726 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
728 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
730 * d10v-dis.c (print_operand): If num is nonzero, then
731 add OPERAND_ACC1, not OPERAND_ACC0.
733 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
735 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
738 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
740 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
743 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
745 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
747 1998-09-09 Michael Meissner <meissner@cygnus.com>
749 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
752 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
754 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
756 (print_insn_little_arm): Detect Thumb symbols in elf object
759 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
761 * alpha-dis.c (print_insn_alpha): Use the machine type to
762 decide which PALcode set to include.
764 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
766 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
768 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
770 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
771 MSUB and MSUBS instructions.
773 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
775 * ppc-opc.c (powerpc_operands): Omit parens around additions in
778 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
780 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
781 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
782 +, -, and d for ColdFire.
784 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
785 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
786 (extract_mbe): Likewise.
788 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
790 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
792 * m10300-opc.c: First cut at UDF instructions.
794 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
796 * m32r-opc.c: Regenerate (remove semantic descriptions).
798 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
800 * arm-dis.c (print_insn_big_arm): Fix indentation.
801 (print_insn_little_arm): Likewise.
803 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
805 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
807 (print_insn_little_arm): Likewise.
809 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
811 Move all global state data into opcode table struct, and treat
812 opcode table as something that is "opened/closed".
813 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
814 (cgen_asm_init): Delete.
815 (cgen_set_parse_operand_fn): New function.
816 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
817 (cgen_dis_init): Delete.
818 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
819 (cgen_current_{opcode_table_mach,endian}): Delete.
820 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
822 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
824 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
827 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
829 * m10300-opc.c: Add entries for "no_match_operands" field in
832 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
834 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
836 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
838 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
840 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
842 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
844 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
846 (OP_J): Remove unnecessary subtraction when 16-bit displacement
847 will be masked later.
849 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
851 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
853 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
855 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
857 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
859 * m10300-dis.c: Only recognize instructions from the currently
861 * m10300-opc.c: Add field indicating the particular variant of
862 the mn10300 each instruction is available on.
864 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
866 * configure.in: For bfd_vax_arch, build vax-dis.lo.
867 * Makefile.am: Rebuild dependencies.
868 (CFILES): Add vax-dis.c.
869 (ALL_MACHINES): Add vax-dis.lo.
870 * aclocal.m4: Rebuild with current libtool.
871 * configure, Makefile.in: Rebuild.
873 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
875 * vax-dis.c: New file, from work by Pauline Middelink
876 <middelin@polyware.iaf.nl>.
877 * disassemble.c (ARCH_vax): Define if ARCH_all.
878 (disassembler): Add case for ARCH_vax.
879 * makefile.vms: Support compilation on vms/vax.
881 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
883 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
884 related to sign extension and the size of ints.
886 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
888 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
889 instructions. Support (sp) addressing mode by expanding it into
892 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
894 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
896 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
898 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
900 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
902 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
905 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
907 * mips-dis.c (print_insn_little_mips): Previously, instruction
908 printing references the symbol table to determine whether the
909 instruction resides in a block regular instructions or mips16
910 instructions. However, when the disassembler gets used in other
911 environments where the symbol table is not present, we no longer
912 rely in the symbol table, rather, use the low bit of the
913 instructions address to guess. There should be no change for usage
914 of the disassembler in host based programs, gdb, objdump.
915 (print_insn_big_mips): ditto.
916 (print_insn_mips): ditto
918 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
920 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
922 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
924 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
926 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
928 * i386-dis.c (index16): Add '%' to register names. Use ','
931 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
933 * i386-dis.c: Don't print opcode suffix when we can figure out the
934 size (and gas can!) by register operands, or from the default
936 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
938 (dis386, dis386_twobyte, grps): Use new suffix macros.
939 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
940 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
941 order of cmps operands to agree with Intel docs. Correct operand
942 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
943 agree with Intel docs.
944 (print_insn_x86): Print orphan fwait before other prefixes.
945 Return correct byte count for orphan fwait with prefixes. Don't
946 print `bound' operands in reverse order.
947 (ckprefix): Stop accumulating prefixes if we get fwait.
948 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
950 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
952 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
953 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
955 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
957 Fix problems when bfd_vma is wider than long.
958 * i386-dis.c: Make op_address and start_pc unsigned.
959 (set_op): Make parameter unsigned.
960 (print_insn_x86): Cast to bfd_vma when passing a value to
962 * ns32k-dis.c (CORE_ADDR): Don't define.
963 (print_insn_ns32k): Change type of addr to bfd_vma. Use
964 bfd_scan_vma to read back address.
965 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
967 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
968 (NEXTULONG): New definition.
969 (print_insn_m68k): Avoid overflow when computing third argument of
971 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
972 Use disp instead of val to store offset values.
973 (print_indexed): Use base_disp instead of word to store base
974 displacement, to avoid overflow.
975 * m10300-dis.c (disassemble): Cast value to long when computing
976 pc-relative address, to get correct sign extension.
978 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
980 * m32r-opc.c: Regenerate.
982 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
984 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
985 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
987 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
989 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
991 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
993 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
995 (OP_DSreg): Rename from OP_DSSI.
996 (OP_ESreg): Rename from OP_ESDI.
997 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
999 (append_seg): Rename from append_prefix.
1000 (ptr_reg): New function.
1001 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1003 (PREFIX_ADDR): Rename from PREFIX_ADR.
1004 (float_reg): Add non-broken opcodes for people who don't want
1007 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1009 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1012 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1014 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1016 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1018 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1019 0; produce error message for shifts of size 32 (or 64 for 64-bit
1020 shifts), because the hardware doesn't support them.
1022 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1024 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1025 LONG_2, LONG_2b formats to use this new operand.
1027 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1029 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1031 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1033 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1034 endian data support.
1036 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1038 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1039 and SHORT_B3b formats to use Rb instead of Ra.
1041 Add FLAG_MUL16 to MUL2XH opcode.
1043 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1044 to existing 1.1.1 parallelisation prohibition procedure.
1046 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1048 * m32r-asm.c,m32r-dis.c: Regenerate.
1050 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1052 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1053 with a shift count of 0.
1055 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1057 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1058 (cgen_hw_lookup_by_num): New function.
1060 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1062 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1064 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1066 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1067 as big-endian on SPARClite.
1069 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1071 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1073 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1075 * po/Make-in (install-info): New target.
1077 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1079 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1080 * configure: Rebuild.
1082 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1084 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1085 variety of ISA2 instructions to set bottom ten bits of trap code.
1087 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1089 * Makefile.am (config.status): Add explicit target so that
1090 config.status depends upon bfd/configure.in.
1091 * Makefile.in: Rebuild.
1093 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1095 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1096 instructions to set bottom ten bits of break code.
1097 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1098 for above optional argument.
1100 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1102 * makefile.vms: Run dec c with /nodebug.
1104 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1106 * Makefile.in: Rebuilt.
1107 * Makefile.am: Regenerated dependencies with mkdep.
1109 * opintl.h (_): Define as dgettext.
1111 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1113 * cgen-asm.c: Internationalised.
1114 * m32r-asm.c: Internationalised.
1115 * m32r-dis.c: Internationalised.
1116 * m32r-opc.c: Internationalised.
1118 * aclocal.m4: Regenerated.
1119 * configure: Regenerated.
1120 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1121 * Makefile.in: Rebuild.
1122 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1123 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1125 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1127 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1129 * aclocal.m4, configure: Rebuild with current tools.
1131 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1133 * opintl.h: New file - contains internationalisation macros used
1134 by source files in this directory.
1135 * po/: New subdirectory - contains internationalisation files.
1136 * po/Make-in: New file - Makefile constructor.
1137 * po/POTFILES.in: New file - list of files in opcodes directory
1138 that should be scan for internationalisation macros.
1139 * po/opcodes.pot: New file - list of internationisation strings
1140 found in files mentioned in po/POTFILES.in.
1141 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1142 entry. Add intl directory to include paths.
1143 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1144 HAVE_STRCPY, HAVE_LC_MESSAGES
1145 * configure.in: Add rule to build Makefile in po subdirectory.
1146 * Makefile.in: Rebuilt.
1147 * aclocal.m4: Rebuilt.
1148 * config.in: Rebuilt.
1149 * configure: Rebuilt.
1150 * alpha-opc.c: Internationalised.
1151 * arc-dis.c: Internationalised.
1152 * arc-opc.c: Internationalised.
1153 * arm-dis.c: Internationalised.
1154 * cgen-asm.c: Internationalised.
1155 * d30v-dis.c: Internationalised.
1156 * dis-buf.c: Internationalised.
1157 * h8300-dis.c: Internationalised.
1158 * h8500-dis.c: Internationalised.
1159 * i386-dis.c: Internationalised.
1160 * m10200-dis.c: Internationalised.
1161 * m10300-dis.c: Internationalised.
1162 * m68k-dis.c: Internationalised.
1163 * m88k-dis.c: Internationalised.
1164 * mips-dis.c: Internationalised.
1165 * ns32k-dis.c: Internationalised.
1166 * opintl.h: Internationalised.
1167 * ppc-opc.c: Internationalised.
1168 * sparc-dis.c: Internationalised.
1169 * v850-dis.c: Internationalised.
1170 * v850-opc.c: Internationalised.
1172 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1174 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1175 (asm_hash_table_entries): New variable.
1176 (cgen_asm_init): Free asm_hash_table_entries.
1177 (hash_insn_array,hash_insn_list): New functions.
1178 (build_asm_hash_table): Use them. Hash macro insns as well.
1179 (cgen_asm_lookup_insn): Update.
1180 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1181 (dis_hash_table_entries): New variable.
1182 (cgen_dis_init): Free dis_hash_table_entries.
1183 (hash_insn_array,hash_insn_list): New functions.
1184 (build_dis_hash_table): Use them. Hash macro insns as well.
1185 (cgen_dis_lookup_insn): Update.
1186 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1187 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1188 (cgen_macro_insn_count): New function.
1189 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1191 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1193 * i386-dis.c (OP_DSSI): Print segment override.
1195 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1197 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1200 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1202 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1203 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1204 * configure.in: Define and substitute WIN32LDFLAGS and
1206 * aclocal.m4: Rebuild with new libtool.
1207 * configure, Makefile.in: Rebuild.
1209 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1211 * m32r-opc.c: Regenerate.
1213 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1215 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1216 before trying to copy it.
1217 * Makefile.in: Rebuild.
1219 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1221 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1223 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1225 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1226 from an arbitrary valid buffer instead of fetching them on demand
1228 (invalid_float): use bit_extract_simple() instead of bit_extract().
1230 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1232 From H.J. Lu <hjl@gnu.org>:
1233 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1236 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1238 * Branched binutils 2.9.
1240 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1242 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1243 disassembling last 4 bytes of a section.
1245 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1247 Fix some gcc -Wall warnings:
1248 * arc-dis.c (print_insn): Add casts to avoid warnings.
1249 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1250 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1251 * m10200-dis.c (disassemble): Likewise.
1252 * m10300-dis.c (disassemble): Likewise.
1253 * ns32k-dis.c (print_insn_ns32k): Likewise.
1254 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1255 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1256 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1257 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1258 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1259 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1260 * tic80-dis.c (print_one_instruction): Likewise.
1261 * w65-dis.c (print_operand): Likewise.
1262 * z8k-dis.c (fetch_data): Likewise.
1263 * a29k-dis.c: Add return type for find_byte_func_type.
1264 * arc-opc.c: Include <stdio.h>. Remove declarations of
1265 insert_multshift and extract_multshift.
1266 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1268 (extract_value): Fully parenthesize expression.
1269 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1270 * h8500-opc.h (h8500_table): Fully bracket initializer.
1271 * w65-opc.h (optable): Likewise.
1272 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1273 * i386-dis.c (OP_E): Initialize local variables.
1274 * m10200-dis.c (print_insn_mn10200): Likewise.
1275 * mips-dis.c (print_insn_mips16): Likewise.
1276 * sh-dis.c (print_insn_shx): Likewise.
1277 * v850-dis.c (print_insn_v850): Likewise.
1278 * ns32k-dis.c (print_insn_arg): Declare.
1279 (get_displacement, invalid_float): Declare.
1280 (list_search, sign_extend, flip_bytes): Declare return type.
1281 (get_displacement): Likewise.
1282 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1284 (print_insn_ns32k): Make i unsigned.
1285 (invalid_float): Make static. Declare type of val.
1286 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1287 on each for iteration.
1288 * tic30-dis.c (get_indirect_operand): Likewise.
1289 * z8k-dis.c (print_insn_z8001): Declare return type.
1290 (print_insn_z8002): Likewise.
1291 (unparse_instr): Fix sprintf format strings.
1293 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1295 * mips-opc.c: Add "sync.l" and "sync.p".
1297 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1299 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1300 default m68k variant to recognize.
1302 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1303 (ctrl, cobr, mem, ea): Likewise.
1304 (print_addr): Likewise. Remove cast.
1305 (ea): Cast argument of print_addr to bfd_vma.
1307 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1309 (cgen_parse_unsigned_integer): Likewise.
1310 (cgen_parse_address): Likewise.
1312 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1314 * i960-dis.c (ctrl): Add full braces to structure initialization.
1315 (cobr, mem, reg): Likewise.
1316 (ea): Correct parenthesization in expression.
1318 * cgen-asm.c: Include <ctype.h>.
1319 (build_asm_hash_table): Remove unused local variable i.
1320 (cgen_parse_keyword): Add casts to avoid warnings.
1322 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1323 symbol. Fix indentation.
1324 (print_insn_little_arm): Likewise.
1326 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1328 * configure.in: Use AM_DISABLE_SHARED.
1329 * aclocal.m4, configure: Rebuild with libtool 1.2.
1331 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1333 These patches are courtesy of Jonathan Walton and Tony Thompson
1334 (athompso@cambridge.arm.com).
1336 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1339 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1340 both the offset and the label closest to the destination.
1342 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1344 * m32r-opc.h: Regenerate.
1346 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1348 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1350 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1352 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1353 assume that info->symbols is non-empty.
1355 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1357 * alpha-opc.c (cvtqs) There is no such thing.
1358 (cvttq): Missing most of the /*d variants.
1360 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1362 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1363 delayed branches or jumps.
1365 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1367 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1369 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1370 * tic30-dis.c (print_branch): Likewise.
1372 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1374 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1375 saved_symbol code as it is no longer needed.
1377 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1379 * cgen-asm.c: Include symcat.h.
1380 * cgen-dis.c,cgen-opc.c: Ditto.
1381 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1383 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1385 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1387 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1389 * m32r-opc.[ch]: Regenerate.
1391 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1393 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1394 arguments. Don't perform validation here.
1395 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1397 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1399 * m32r-opc.c: Regenerate.
1401 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1403 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1404 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1406 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1408 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1410 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1412 * configure.in: Get the version number from BFD.
1413 * configure: Rebuild.
1415 From H.J. Lu <hjl@gnu.org>:
1416 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1417 * Makefile.in: Rebuild.
1419 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1421 * m32r-opc.c: Regenerate.
1422 * m32r-opc.h: Regenerate.
1424 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1426 * m32r-opc.c: Regenerate.
1428 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1430 Fix rac to accept only a0:
1431 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1432 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1433 Introduce OPERAND_GPR.
1434 * d10v-dis.c (print_operand): Likewise.
1436 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1438 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1439 (cgen_hw_lookup): Make result const.
1440 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1442 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1444 * configure, aclocal.m4: Rebuild with new libtool.
1446 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1448 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1449 instructions use a PC relative branch, not absolute.
1451 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1453 * configure.in: Set libtool_enable_shared rather than
1454 libtool_shared. Remove diversion hack.
1455 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1457 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1459 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1460 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1462 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1464 * tic30-dis.c: New file.
1465 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1466 * configure.in: Handle bfd_tic30_arch.
1467 * Makefile.am: Rebuild dependencies.
1468 (CFILES): Add tic30-dis.c
1469 (ALL_MACHINES): Add tic30-dis.lo.
1470 * configure, Makefile.in: Rebuild.
1472 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1474 * m32r-opc.h (HAVE_CPU_M32R): Define.
1476 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1478 * v850-opc.c (insertion routines): If both alignment and size is
1479 wrong then report this.
1481 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1483 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1484 Only recognize instructions for the current target_processor.
1486 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1488 * d10v-dis.c (PC_MASK): Correct value.
1489 (print_operand): If there's a reloc, don't calculate the
1490 address because they could be in different sections.
1492 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1494 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1495 instruction after the 4650's "mul" instruction; nobody's using the
1496 4010 these days. If object files someday indicate which processor
1497 variant they're intended for, we can do a better job at this.
1499 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1501 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1502 table provided entry size. Use CGEN_INSN_MNEMONIC.
1503 (cgen_parse_keyword): Rewrite.
1504 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1505 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1506 * cgen-opc.c: Clean up pass over `struct foo' usage.
1507 (cgen_keyword_lookup_value): Handle "" entry.
1508 (cgen_keyword_add): Likewise.
1510 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1512 * mips-opc.c: Add FP_D to s.d instruction flags.
1514 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1516 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1518 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1520 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1521 PC relative offset forms before the 15 bit forms. An assembler command
1522 line option now chooses the default.
1524 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1526 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1527 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1529 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1531 * configure: Only build libopcodes shared if --enable-shared's value
1532 was `yes', or was set to `*opcodes*'.
1533 * aclocal.m4: Likewise.
1534 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1535 original source of this bit of code. It's not clear what the best fix
1538 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1540 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1541 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1542 offset forms before the 15 bit forms, to default to the long forms.
1544 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1546 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1548 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1550 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1551 symbol if none is present.
1552 (print_insn_big_arm): Prevent examination of stored symbol if
1555 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1557 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1559 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1561 * disassemble.c: Remove disasm_symaddr() function.
1563 * arm-dis.c: Use info->symbol instead of info->flags to determine
1564 if disassmbly should be in Thumb or Arm mode.
1566 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1568 * arm-dis.c: Add support for disassembling Thumb opcodes.
1569 (print_insn_thumb): New function.
1571 * disassemble.c (disasm_symaddr): New function.
1573 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1574 (thumb_opcodes): Table of Thumb opcodes.
1576 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1578 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1580 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1581 and 'v' as operand types.
1583 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1585 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1586 <olivier.carmona@di.epfl.ch>.
1587 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1588 which has a two word opcode with a one word argument.
1590 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1592 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1593 unsigned, not signed.
1594 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1596 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1598 * d10v-dis.c (print_operand):
1599 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1601 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1603 * d10v-opc.c (OPERAND_FLAG): Split into:
1604 (OPERAND_FFLAG, OPERAND_CFLAG) .
1608 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1610 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1611 field for all INSN_MACRO's.
1612 * mips16-opc.c: same
1614 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1616 * mips-opc.c (sync,cache): These are 3900 insns.
1618 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1620 sh-opc.h (sh_table): Remove ftst/nan.
1622 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1624 * mips-opc.c (ffc, ffs): Fix mask.
1626 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1628 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1631 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1633 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1634 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1636 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1638 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1639 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1641 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1643 * v850-dis.c (disassemble): Replace // with /* ... */
1645 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1647 * sparc-opc.c: Add wr & rd for v9a asr's.
1648 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1649 (v9a_asr_reg_names): New variable.
1650 Patch from David Miller <davem@vger.rutgers.edu>.
1652 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1654 * sparc-opc.c (v9notv9a): New insn type.
1655 (IMPDEP): Move to the end to not conflict with edge8 et al.
1656 Patch from David Miller <davem@vger.rutgers.edu>.
1658 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1660 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1662 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1664 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1666 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1668 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1669 of disassemble_info structure to determine if an overlay address
1670 has a matching symbol in low memory.
1672 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1673 new symbol_at_address_func field in disassemble_info structure.
1675 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1677 * v850-opc.c (extract_d22): Use signed arithmatic.
1679 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1681 * mips-opc.c: Three op mult is not an ISA insn.
1683 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1685 * mips-opc.c: Fix formatting.
1687 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1689 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1690 than assuming that char is signed. Explicitly sign extend 16 bit
1691 values, rather than assuming that short is 16 bits.
1692 (OP_sI, OP_J, OP_DIR): Likewise.
1694 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1696 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1699 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1701 * v850-opc.c: Fix typo in comment.
1703 * v850-dis.c (disassemble): Add test of processor type when
1704 determining opcodes.
1706 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1708 * configure.in: Use a diversion to set enable_shared before the
1709 arguments are parsed.
1710 * configure: Rebuild.
1712 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1714 * m68k-opc.c (TBL1): Use ! rather than `.
1715 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1717 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1719 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1721 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1723 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1726 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1727 * aclocal.m4: Rebuild with new libtool.
1728 * configure: Rebuild.
1730 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1732 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1734 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1736 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1738 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1740 * v850-opc.c (v850_opcodes): Further rearrangements.
1742 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1744 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1746 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1748 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1751 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1753 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1755 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1757 * v850-opc.c: Initialise processors field of v850_opcode structure.
1759 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1761 Merge changes from Martin Hunt:
1763 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1765 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1766 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1767 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1769 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1771 * d30v-dis.c (print_insn): First operand of d*i (delayed
1772 branch) instructions is relative.
1774 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1775 (d30v_operand_table): Add IMM6S3 type.
1776 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1778 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1779 and cmp instructions.
1781 * d30v-opc.c: Correct entries for repeat*, and sat*.
1782 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1783 types. Correct several formats.
1785 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1787 * d30v-opc.c (pre_defined_registers): Change control registers.
1789 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1790 SHORT_C2. Manual was incorrect.
1792 * d30v-dis.c (lookup_opcode): Return value now indicates
1793 if an opcode has a short and a long form. Used for deciding
1794 to append a ".s" or ".l".
1795 (print_insn): Append a ".s" to an instruction if it is
1796 the short form and ".l" if it is a long form. Do not append
1797 anything if the instruction has only one possible size.
1799 * d30v-opc.c: Change mulx2h to require an even register.
1800 New form: SHORT_A2; a SHORT_A form that needs an even
1801 register as the first operand.
1803 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1804 instruction was not being disassembled if there were an odd
1805 number of instructions.
1807 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1809 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1811 * v850-dis.c (disassemble): Improved display of register lists.
1813 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1815 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1816 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1817 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1818 fandnot1s, fandnot2s.
1820 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1822 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1824 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1826 * cgen-asm.c (cgen_parse_address): New argument resultp.
1827 All callers updated.
1828 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1830 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1832 * mn10200-dis.c (disassemble): PC relative instructions are
1833 relative to the next instruction, not the current instruction.
1835 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1837 * v850-dis.c (disassemble): Only signed extend values that are not
1838 returned by extract functions.
1839 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1841 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1843 * v850-opc.c: Update comments. Remove use of
1844 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1846 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1848 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1850 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1852 * configure: Rebuilt with latest devo autoconf for NT support.
1854 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1856 * v850-dis.c (disassemble): Use curly brace syntax for register
1859 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1860 where r0 is being used as a destination register.
1862 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1864 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1866 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1868 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1870 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1872 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1873 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1876 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1878 * configure (cgen_files): Add support for v850e target.
1879 * configure.in (cgen_files): Add support for v850e target.
1881 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1883 * configure (cgen_files): Add support for v850ea target.
1884 * configure.in (cgen_files): Add support for v850ea target.
1886 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1888 * configure.in (bfd_arc_arch): Add.
1889 * configure: Rebuild.
1890 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1891 * Makefile.in: Rebuild.
1892 * arc-dis.c, arc-opc.c: New files.
1893 * disassemble.c (ARCH_all): Define ARCH_arc.
1894 (disassembler): Add ARC support.
1896 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1898 * v850-dis.c (disassemble): Add support for v850EA instructions.
1900 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1901 (v850_opcodes): Add v850EA instructions.
1903 * v850-dis.c (disassemble): Add support for v850E instructions.
1905 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1906 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1907 insert_spe, extract_spe): New Functions.
1908 (v850_opcodes): Add v850E instructions.
1910 * v850-opc.c: Reorganised and re-layed out to improve readability
1913 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1915 * configure: Rebuild with autoconf 2.12.1.
1917 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1919 * aclocal.m4, configure: Rebuild with new automake patches.
1921 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1923 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1924 * acinclude.m4: Just include acinclude.m4 from BFD.
1925 * aclocal.m4, configure: Rebuild.
1927 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1929 * Makefile.am: New file, based on old Makefile.in.
1930 * acconfig.h: New file.
1931 * acinclude.m4: New file.
1932 * stamp-h.in: New file.
1933 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1934 Removed shared library handling; now handled by libtool. Replace
1935 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1936 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1937 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1938 handling in AC_OUTPUT.
1939 * dep-in.sed: Change .o to .lo.
1940 * Makefile.in: Now built with automake.
1941 * aclocal.m4: Now built with aclocal.
1942 * config.in, configure: Rebuild.
1944 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1946 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1948 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1950 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1952 * sparc-dis.c (sorted_opcodes): New static local.
1953 (struct opcode_hash): `opcode' is pointer to const element.
1954 (build_hash): First arg is now table of sorted pointers.
1955 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1956 (compare_opcodes): Update.
1958 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1960 * cgen-opc.c: #include <ctype.h>.
1961 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1962 Handle case insensitive hashing.
1963 (hash_keyword_value): Change type of `value' to unsigned int.
1965 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1967 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1968 precision FP, mark it as such. Likewise for double precision
1969 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1972 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1974 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1976 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1977 nesting depth when all the macros are expanded.
1979 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1981 * sparc-opc.c: The fcmp v9a instructions take an integer register
1982 as a destination, not a floating point register. From Christian
1983 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1985 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1987 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1988 syntax. From Roman Hodek
1989 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1991 * i386-dis.c (twobyte_has_modrm): Fix pand.
1993 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1995 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1997 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1999 * arm-dis.c: Add prototypes for arm_decode_shift and
2002 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2004 * mips-opc.c: Add r3900 insns.
2006 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2008 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2009 print delay slot instructions on the same line. When using a PC
2010 relative load, add a comment with the value being loaded if it can
2013 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2015 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2016 to pushS/popS for segment regs and byte constant so that
2017 pushw/popw printed when in 16 bit data mode.
2019 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2020 print cbtw, cwtd in 16 bit data mode.
2021 * i386-dis.c (putop): extra case W to support above.
2023 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2024 address size prefix in 16 bit address mode.
2026 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2028 * sh-dis.c: Reindent. Rename local variable fprintf to
2031 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2033 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2035 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2037 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2039 * mips16-opc.c (mip16_opcodes): same.
2041 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2043 * m68k-opc.c (moveb): Change $d to %d.
2045 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2047 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2048 (twobyte_has_modrm): Likewise.
2050 (OP_MMX, OP_EM, OP_MS): New static functions.
2052 * i386-dis.c: Revert patch of April 4. The output now matches
2055 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2057 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2060 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2062 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2064 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2066 * Makefile.in (install): Depend upon installdirs.
2067 (installdirs): New target.
2069 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2071 From Thomas Graichen <graichen@rzpd.de>:
2072 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2073 * configure: Rebuild.
2075 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2077 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2078 Delete string{,s}.h support.
2080 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2082 * cgen-asm.c (cgen_parse_operand_fn): New global.
2083 (cgen_parse_{{,un}signed_integer,address}): Update call to
2084 cgen_parse_operand_fn.
2085 (cgen_init_parse_operand): New function.
2086 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2087 from cgen_asm_init_parse.
2088 (m32r_cgen_assemble_insn): New operand `errmsg'.
2089 Delete call to as_bad, return error message to caller.
2090 (m32r_cgen_asm_hash_keywords): #if 0 out.
2092 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2094 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2096 [case 'J']: Fix typo in register name.
2098 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2100 * configure.in: Substitute SHLIB_LIBS.
2101 * configure: Rebuild.
2102 * Makefile.in (SHLIB_LIBS): New variable.
2103 ($(SHLIB)): Use $(SHLIB_LIBS).
2105 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2107 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2109 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2111 * disassemble.c (disassembler): Handle m32r.
2113 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2115 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2116 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2117 * Makefile.in (CFILES): Add them.
2118 (ALL_MACHINES): Add them.
2119 (dependencies): Regenerate.
2120 * configure.in (cgen_files): New variable.
2121 (bfd_m32r_arch): Add entry.
2122 * configure: Regenerate.
2124 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2126 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2127 * configure: Rebuild.
2129 * Makefile.in: Rebuild dependencies.
2131 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2133 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2136 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2138 * Branched binutils 2.8.
2140 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2142 * m10200-dis.c: Rename from mn10200-dis.c.
2143 * m10200-opc.c: Rename from mn10200-opc.c.
2144 * m10300-dis.c: Rename from mn10300-dis.c
2145 * m10300-opc.c: Rename from mn10300-opc.c.
2146 * Makefile.in: Update accordingly.
2148 * mips16-opc.c: Add mul and dmul macros.
2150 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2152 * makefile.vms: Update CFLAGS, add clean target.
2154 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2156 * mips-opc.c: Add "wait". From Ralf Baechle
2157 <ralf@gnu.ai.mit.edu>.
2159 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2160 * configure, config.in: Rebuild.
2161 * sysdep.h: Include <stdlib.h> if it exists.
2162 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2164 * Makefile.in: Rebuild dependencies.
2166 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2168 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2169 Andrew Bray <andy@madhouse.demon.co.uk>.
2171 * mips-opc.c: Add cast when setting mips_opcodes.
2173 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2175 * v850-dis.c (disassemble): Fix sign extension problem.
2176 * v850-opc.c (extract_d*): Fix sign extension problems to make
2177 disassembly calculate branch offsets correctly.
2179 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2181 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2183 * mips-opc.c: Add dctr and dctw.
2185 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2187 * d30v-dis.c (print_insn): Change the way signed constants
2190 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2192 * Makefile.in (BFD_H): New variable.
2193 (HFILES): New variable.
2194 (CFILES): Add all C files.
2195 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2196 Delete old dependencies, and build new ones.
2197 * dep-in.sed: New file.
2199 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2201 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2203 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2205 * mn10200-opc.c: Change "trap" to "syscall".
2206 * mn10300-opc.c: Add new "syscall" instruction.
2208 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2210 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2211 mulul insns on the coldfire.
2213 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2215 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2216 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2217 (print_insn_little_arm): Likewise.
2219 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2221 Based on patches from H.J. Lu <hjl@lucon.org>:
2222 * i386-dis.c (fetch_data): Add prototype.
2223 * m68k-dis.c (fetch_data): Add prototype.
2224 (dummy_print_address): Add prototype. Make static.
2225 * ppc-opc.c (valid_bo): Add prototype.
2226 * sparc-dis.c (build_hash_table): Add prototype.
2227 (is_delayed_branch, compute_arch_mask): Add prototypes.
2228 (print_insn_sparc): Make several local variables const.
2229 (compare_opcodes): Change arguments to const PTR. Add prototype.
2230 * sparc-opc.c (arg): Change name field to be const.
2231 (lookup_name, lookup_value): Add prototypes. Change table and
2232 name parameters to be const.
2233 (sparc_encode_asi): Change name parameter to be const.
2234 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2235 (sparc_encode_sparclet_cpreg): Likewise.
2236 (sparc_decode_asi): Change return type to be const.
2237 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2238 (sparc_decode_sparclet_cpreg): Likewise.
2240 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2242 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2243 Solaris doesn't like the combined options, and the -f is
2245 (stamp-tshlink, install): Likewise.
2247 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2249 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2252 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2254 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2256 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2258 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2261 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2263 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2265 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2267 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2269 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2271 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2273 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2275 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2276 floatformat_to_double to make portable.
2277 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2280 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2282 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2283 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2285 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2287 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2288 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2290 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2292 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2293 (OFF_SL_BR_SCALED): ... to this, and added the flag
2294 TIC80_OPERAND_BASEREL to the flags word.
2295 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2298 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2300 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2301 Change mips_opcodes from const array to a pointer,
2302 and change bfd_mips_num_opcodes from const int to int,
2303 so that we can increase the size of the mips opcodes table
2306 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2308 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2309 store BITNUM values in the table in one's complement form
2310 to match behavior when assembler is given a raw numeric
2311 value for a BITNUM operand.
2312 * tic80-dis.c (print_operand_bitnum): Ditto.
2314 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2316 * d30v-opc.c: Removed references to FLAG_X.
2318 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2320 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2322 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2324 * Makefile.in: Added d30v object files.
2325 * configure: (bfd_d30v_arch) Rebuilt.
2326 * configure.in: (bfd_d30v_arch) Added new case.
2327 * d30v-dis.c: New file.
2328 * d30v-opc.c: New file.
2329 * disassemble.c (disassembler) Add entry for d30v.
2331 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2333 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2334 representations for the floating point BITNUM values.
2336 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2338 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2339 in the table in one's complement form, as they appear in the
2341 (tic80_symbol_to_value): Use macros to access predefined
2343 (tic80_value_to_symbol): Ditto.
2344 (tic80_next_predefined_symbol): New function.
2345 * tic80-dis.c (print_operand_bitnum): Remove code that did
2346 one's complement for BITNUM values.
2348 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2350 * makefile.vms: Remove 8 bit characters. Update to latest
2353 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2355 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2357 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2359 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2360 (IMM24_PCREL): Likewise.
2362 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2364 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2365 address for an extended PC relative instruction that is not a
2368 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2370 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2373 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2375 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2376 (tic80_opcodes): Sort entries so that long immediate forms
2377 come after short immediate forms, making it easier for
2378 assembler to select the right one for a given operand.
2380 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2382 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2384 (print_insn_mips16): Likewise.
2386 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2388 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2389 a symbol class that restricts translation to just that
2390 class (general register, condition code, etc).
2392 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2394 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2395 and REG_DEST_E for register operands that have to be
2396 an even numbered register. Add REG_FPA for operands that
2397 are one of the floating point accumulator registers.
2398 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2399 (tic80_opcodes): Change entries that need even numbered
2400 register operands to use the new operand table entries.
2401 Add "or" entries that are identical to "or.tt" entries.
2403 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2405 * mips16-opc.c: Add new cases of exit instruction for
2407 * mips-dis.c (print_mips16_insn_arg): Display floating point
2408 registers in operands of exit instruction. Print `$' before
2409 register names in operands of entry and exit instructions.
2411 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2413 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2414 pairs for all predefined symbols recognized by the assembler.
2415 Also used by the disassembling routines.
2416 (tic80_symbol_to_value): New function.
2417 (tic80_value_to_symbol): New function.
2418 * tic80-dis.c (print_operand_control_register,
2419 print_operand_condition_code, print_operand_bitnum):
2420 Remove private tables and use tic80_value_to_symbol function.
2422 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2424 * d10v-dis.c (print_operand): Change address printing
2425 to correctly handle PC wrapping. Fixes PR11490.
2427 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2429 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2432 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2434 * mips-dis.c (print_insn_mips16): Set insn_info information.
2435 (print_mips16_insn_arg): Likewise.
2437 * mips-dis.c (print_insn_mips16): Better handling of an extend
2438 opcode followed by an instruction which can not be extended.
2440 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2442 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2443 coldfire moveb instruction to not allow an address register as
2444 destination. Although the documentation does not indicate that
2445 this is invalid, experiments uncovered unexpected behavior.
2446 Added a comment explaining the situation. Thanks to Andreas
2447 Schwab for pointing this out to me.
2449 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2451 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2452 entries are presorted so that entries with the same mnemonic are
2453 adjacent to each other in the table. Sort the entries for each
2454 instruction so that this is true.
2456 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2458 * m68k-dis.c: Include <libiberty.h>.
2459 (print_insn_m68k): Sort the opcode table on the most significant
2460 nibble of the opcode.
2462 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2464 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2465 "vsub", "vst", "xnor", and "xor" instructions.
2466 (V_a1): Renamed from V_a, msb of accumulator reg number.
2467 (V_a0): Add macro, lsb of accumulator reg number.
2469 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2471 * tic80-dis.c (print_insn_tic80): Broke excessively long
2472 function up into several smaller ones and arranged for
2473 the instruction printing function to be callable recursively
2474 to print vector instructions that have both a load and a
2475 math instruction packed into a single opcode.
2476 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2477 to explain why it comes after the other vector opcodes.
2479 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2481 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2482 move insns to handle immediate operands.
2484 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2486 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2487 fix operand mask in the "moveml" entries for the coldfire.
2489 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2491 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2492 New macros for building vector instruction opcodes.
2493 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2494 FMT_LI, which were unused. The field is now a flags field.
2495 Remove some opcodes that are possible, but illegal, such
2496 as long immediate instructions with doubles for immediate
2497 values. Add "vadd" and "vld" instructions.
2499 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2501 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2502 the order more logical. Move the shift alias instructions ("rotl",
2503 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2504 interspersed with the regular sr.x and sl.x instructions. Add
2505 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2506 "sub", "subu", "swcr", and "trap".
2508 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2510 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2511 (OFF_SL_PC): Renamed from OFF_SL.
2512 (OFF_SS_BR): New operand type for base relative operand.
2513 (OFF_SL_BR): New operand type for base relative operand.
2514 (REG_BASE): New operand type for base register operand.
2515 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2516 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2517 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2519 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2520 10 char field, padded with spaces on rhs, rather than a string
2521 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2522 than old TIC80_OPERAND_RELATIVE. Add support for new
2523 TIC80_OPERAND_BASEREL flag bit.
2525 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2527 * tic80-dis.c (print_insn_tic80): Print floating point operands
2529 * tic80-opc.c (SPFI): Add single precision floating point
2530 immediate operand type.
2531 (ROTATE): Add rotate operand type for shifts.
2532 (ENDMASK): Add for shifts.
2533 (n): Macro for the 'n' bit.
2534 (i): Macro for the 'i' bit.
2535 (PD): Macro for the 'PD' field.
2536 (P2): Macro for the 'P2' field.
2537 (P1): Macro for the 'P1' field.
2538 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2541 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2543 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2544 adding in current address for pc-relative operands.
2546 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2548 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2549 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2550 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2551 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2552 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2553 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2554 (REG_SCALED, LSI_SCALED): New operand types.
2555 (E): New macro for 'E' bit at bit 27.
2556 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2557 opcodes, including the various size flavors (b,h,w,d) for
2558 the direct load and store instructions.
2560 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2562 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2564 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2565 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2566 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2567 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2568 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2569 masks with "MASK_* & ~M_*" to get the M bit reset.
2570 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2572 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2574 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2575 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2576 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2578 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2579 CC, SICR, and LICR table entries.
2580 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2581 "bcnd", and "brcr" opcodes.
2583 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2585 * ppc-opc.c (powerpc_operands): Make comment match the
2586 actual fields (no shift field).
2587 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2588 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2589 partial implementation, work in progress.
2590 * tic80-opc.c (tic80_operands): Begin construction operands table.
2591 (tic80_opcodes): Continue populating opcodes table and start
2592 filling in the operand indices.
2593 (tic80_num_opcodes): Add this.
2595 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2597 * m68k-opc.c: Add #B case for moveq.
2599 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2601 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2602 before they are used.
2604 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2606 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2607 for "breakpoint" instruction.
2609 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2611 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2612 (dep): Use ALL_CFLAGS rather than CFLAGS.
2614 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2616 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2619 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2621 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2622 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2624 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2626 * mips16-opc.c: Add "abs".
2628 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2630 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2631 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2632 (disassembler): Add bfd_arch_tic80 support to set disassemble
2633 to print_insn_tic80.
2634 * tic80-dis.c (print_insn_tic80): Add stub.
2636 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2638 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2639 * configure: Regenerate with autoconf.
2640 * tic80-dis.c: Add file.
2641 * tic80-opc.c: Add file.
2643 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2645 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2647 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2649 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2650 (mn10200_opcodes): Use it for some logicals and btst insns.
2651 Add "break" and "trap" instructions.
2653 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2655 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2657 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2659 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2660 relative load or add now depends upon whether the instruction is
2663 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2665 * mn10200-dis.c: Finish writing disassembler.
2666 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2667 Fix mask for "jmp (an)".
2669 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2670 handle endianness issues for mn10300.
2672 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2674 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2676 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2677 instruction. Fix opcode field for "movb (imm24),dn".
2679 * mn10200-opc.c (mn10200_operands): Fix insertion position
2682 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2684 * mn10200-opc.c: Create mn10200 opcode table.
2685 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2686 but moving along nicely.
2688 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2690 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2692 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2694 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2695 specifiers for fmovem* instructions.
2697 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2699 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2701 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2703 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2706 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2708 * mn10300-opc.c: Add some comments explaining the various
2711 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2713 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2715 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2718 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2719 operand specifiers in fmovm* instructions.
2721 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2723 * ppc-opc.c (insert_li): Give an error if the offset has the two
2724 least significant bits set.
2726 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2728 * mips-dis.c (print_insn_mips16): Separate the instruction from
2729 the arguments with a tab, not a space.
2731 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2733 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2736 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2739 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2741 * configure: Rebuild with autoconf 2.12.
2743 Add support for mips16 (16 bit MIPS implementation):
2744 * mips16-opc.c: New file.
2745 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2746 (mips16_reg_names): New static array.
2747 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2748 after seeing a 16 bit symbol.
2749 (print_insn_little_mips): Likewise.
2750 (print_insn_mips16): New static function.
2751 (print_mips16_insn_arg): New static function.
2752 * mips-opc.c: Add jalx instruction.
2753 * Makefile.in (mips16-opc.o): New target.
2754 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2755 * configure: Rebuild.
2757 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2759 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2760 operand specifiers in *save, *restore and movem* instructions.
2762 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2765 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2766 register operands for immediate arithmetic, not, neg, negx, and
2767 set according to condition instructions.
2769 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2770 specifier of the effective-address operand in immediate forms of
2771 arithmetic instructions. The specifier for the immediate operand
2772 notes how and where the constant will be stored.
2774 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2776 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2779 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2782 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2784 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2786 * mn10300-dis.c (disassemble): Handle register lists.
2788 * mn10300-opc.c: Fix handling of register list operand for
2789 "call", "ret", and "rets" instructions.
2791 * mn10300-dis.c (disassemble): Print PC-relative and memory
2792 addresses symbolically if possible.
2793 * mn10300-opc.c: Distinguish between absolute memory addresses,
2794 pc-relative offsets & random immediates.
2796 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2798 (disassemble): Handle SPLIT and EXTENDED operands.
2800 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2802 * mn10300-dis.c: Rough cut at printing some operands.
2804 * mn10300-dis.c: Start working on disassembler support.
2805 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2807 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2809 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2811 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2813 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2815 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2817 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2818 register argument is calls and jmp instructions.
2820 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2822 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2823 getx operand. Fix opcode for mulqu imm,dn.
2825 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2827 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2828 in MN10300_OPERAND_SPLIT operands for how many bits
2829 appear in the basic insn word. Add IMM32_HIGH24,
2830 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2831 (mn10300_opcodes): Use new operands as needed.
2833 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2834 for bset, bclr, btst instructions.
2835 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2837 * mn10300-opc.c (mn10300_operands): Remove many redundant
2838 operands. Update opcode table as appropriate.
2839 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2840 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2842 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2844 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2845 operands (for indexed load/stores). Fix bitpos for DI
2846 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2847 few instructions that insert immediates/displacements in the
2848 middle of the instruction. Add IMM8E for 8 bit immediate in
2849 the extended part of an instruction.
2850 (mn10300_operands): Use new opcodes as appropriate.
2852 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2854 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2855 sequential so the assembler never parallelizes it with
2858 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2860 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2861 a data/address register that appears in register field 0
2862 and register field 1.
2863 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2865 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2867 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2868 standard disassembly.
2870 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2871 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2872 Recategorize PALcode instructions.
2874 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2876 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2878 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2880 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2881 there are no operand types.
2883 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2885 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2887 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2889 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2891 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2893 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2895 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2896 and sst.w instructions.
2898 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2901 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2903 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2906 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2908 * ppc-opc.c (PPCPWR2): Define.
2909 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2912 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2914 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2915 field for movhu instruction.
2917 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2918 cast value to "long" not "signed long" to keep hpux10
2921 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2923 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2926 * mn10300-opc.c (FMT*): Remove definitions.
2928 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2929 for shift-by-register opcodes.
2931 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2932 into [AD][MN][01] for encoding the position of the register
2935 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2937 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2938 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2940 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2942 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2943 Fix various typos. Add "PAREN" operand.
2944 (MEM, MEM2): Define.
2945 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2946 operands. Fix several typos.
2948 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2951 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2953 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2954 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2956 (mn10300_opcodes): Break opcode format out into its own field.
2957 Update many operand fields to deal with signed vs unsigned
2958 issues. Fix one or two typos in the "mov" instruction
2959 opcode, mask and/or operand fields.
2961 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2963 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2964 m68851 wasn't reset.
2966 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2968 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2969 all opcodes. Very rough cut at operands for all opcodes.
2971 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2974 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2976 * mn10200-opc.c, mn10300-opc.c: New files.
2977 * mn10200-dis.c, mn10300-dis.c: New files.
2978 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2979 * disassemble.c: Break mn10x00 support into 10200 and 10300
2981 * configure.in: Likewise.
2982 * configure: Rebuilt.
2984 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2986 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2988 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2992 * disassemble (ARCH_mn10x00): Define.
2993 (disassembler): Handle bfd_arch_mn10x00.
2994 * configure.in: Recognize bfd_mn10x00_arch.
2995 * configure: Rebuilt.
2997 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2999 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3000 accordingly. Don't declare functions using op_rtn.
3002 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3004 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3005 params to be more standard.
3006 * (disassemble): Print absolute addresses and symbolic names for
3007 branch and jump targets.
3008 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3010 * (v850_opcodes): Add breakpoint insn.
3012 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3014 * m68k-opc.c: Move the fmovemx data register cases before the
3015 other cases, so that they get recognized before the data register
3016 does gets treated as a degenerate register list.
3018 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3020 * mips-opc.c: Add a case for "div" and "divu" with two registers
3021 and a destination of $0.
3023 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3025 * mips-dis.c (print_insn_arg): Add prototype.
3026 (_print_insn_mips): Ditto.
3028 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3030 * mips-dis.c (print_insn_arg): Print condition code registers as
3033 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3035 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3037 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3039 * v850-dis.c (disassemble): Make static. Provide prototype.
3041 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3043 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3046 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3048 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3049 ']' characters into the output stream.
3050 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3051 Add "memop" field to all opcodes (for the disassembler).
3052 Reorder opcodes so that "nop" comes before "mov" and "jr"
3053 comes before "jarl".
3055 * v850-dis.c (print_insn_v850): Fix typo in last change.
3057 * v850-dis.c (print_insn_v850): Properly handle disassembling
3058 a two byte insn at the end of a memory region when the memory
3059 region's size is only two byte aligned.
3061 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3063 * v850-dis.c (v850_reg_names): Define.
3064 (v850_sreg_names, v850_cc_names): Likewise.
3065 (disassemble): Very rough cut at printing operands (unformatted).
3067 * v850-opc.c (BOP_MASK): Fix.
3068 (v850_opcodes): Fix mask for jarl and jr.
3070 * v850-dis.c: New file. Skeleton for disassembler support.
3071 * Makefile.in Remove v850 references, they're not needed here.
3072 * configure.in: Add v850-dis.o when building v850 toolchains.
3073 * configure: Rebuilt.
3074 * disassemble.c (disassembler): Call v850 disassembler.
3076 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3077 (insert_d8_6, extract_d8_6): New functions.
3078 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3079 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3081 (IF4A, IF4B): Use "D7" instead of "D7S".
3082 (IF4C, IF4D): Use "D8_7" instead of "D8".
3083 (IF4E, IF4F): New. Use "D8_6".
3084 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3085 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3087 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3088 (v850_operands): Change D16 to D16_15, use special insert/extract
3089 routines. New new D16 that uses the generic insert/extract code.
3090 (IF7A, IF7B): Use D16_15.
3091 (IF7C, IF7D): New. Use D16.
3092 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3094 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3095 message. Issue an error if the branch offset is odd.
3097 * v850-opc.c: Add notes about needing special insert/extract
3098 for all the load/store insns, except "ld.b" and "st.b".
3100 * v850-opc.c (insert_d22, extract_d22): New functions.
3101 (v850_operands): Use insert_d22 and extract_d22 for
3103 (insert_d9): Fix range check.
3105 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3107 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3108 and set bits field to D9 and D22 operands.
3110 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3112 * v850-opc.c (v850_operands): Define SR2 operand.
3113 (v850_opcodes): "ldsr" uses R1,SR2.
3115 * v850-opc.c (v850_opcodes): Fix opcode specs for
3116 sld.w, sst.b, sst.h, sst.w, and nop.
3118 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3120 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3121 end of the opcode table.
3123 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3125 * d10v-opc.c (pre_defined_registers): Added register pairs,
3126 "r0-r1", "r2-r3", etc.
3128 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3130 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3131 Create I16U for an unsigned 16bit mmediate operand.
3132 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3134 * v850-opc.c (v850_operands): Define EP operand.
3135 (IF4A, IF4B, IF4C, IF4D): Use EP.
3137 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3138 with immediate operand, "movhi". Tweak "ldsr".
3140 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3141 correct. Get sld.[bhw] and sst.[bhw] closer.
3143 * v850-opc.c (v850_operands): "not" is a two byte insn
3145 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3147 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3149 * v850-opc.c (two): Get order of words correct.
3151 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3153 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3154 register source and destination operands.
3155 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3157 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3158 same thinko in "trap" opcode.
3160 * v850-opc.c (v850_opcodes): Add initializer for size field
3163 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3164 Add D8 for 8-bit unsigned field in short load/store insns.
3165 (IF4A, IF4D): These both need two registers.
3166 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3167 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3168 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3169 for "ldsr" and "stsr".
3170 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3173 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3174 short store word (sst.w).
3176 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3178 * v850-opc.c (v850_operands): Added insert and extract fields,
3179 pointers to functions that handle unusual operand encodings.
3181 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3183 * v850-opc.c (v850_opcodes): Enable "trap".
3185 * v850-opc.c (v850_opcodes): Fix order of displacement
3186 and register for "set1", "clr1", "not1", and "tst1".
3188 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3190 * v850-opc.c (v850_operands): Add "B3" support.
3191 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3194 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3196 * v850-opc.c: Close unterminated comment.
3198 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3200 * v850-opc.c (v850_operands): Add flags field.
3201 (v850_opcodes): add move opcodes.
3203 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3205 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3206 * configure: (bfd_v850v_arch) Add new case.
3207 * configure.in: (bfd_v850_arch) Add new case.
3208 * v850-opc.c: New file.
3210 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3212 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3214 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3216 * d10v-opc.c: Add additional information to the opcode
3217 table to help determinine which instructions can be done
3220 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3222 * mpw-make.sed: Update editing of include pathnames to be
3225 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3227 * arm-opc.h: Added "bx" instruction definition.
3229 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3231 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3233 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3235 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3237 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3239 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3241 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3243 * makefile.vms: Update for alpha-opc changes.
3245 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3247 * i386-dis.c (print_insn_i386): Actually return the correct value.
3248 (ONE, OP_ONE): #ifdef out; not used.
3250 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3252 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3253 Changed subi operand type to treat 0 as 16.
3255 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3257 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3260 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3262 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3263 memory transfer instructions. Add new format string entries %h and %s.
3264 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3267 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3269 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3270 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3272 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3274 * alpha-dis.c (print_insn_alpha_osf): Remove.
3275 (print_insn_alpha_vms): Remove.
3276 (print_insn_alpha): Make globally visible. Chose the register
3277 names based on info->flavour.
3278 * disassemble.c: Always return print_insn_alpha for the alpha.
3280 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3282 * d10v-dis.c (dis_long): Handle unknown opcodes.
3284 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3286 * d10v-opc.c: Changes to support signed and unsigned numbers.
3287 All instructions with the same name that have long and short forms
3288 now end in ".l" or ".s". Divs added.
3289 * d10v-dis.c: Changes to support signed and unsigned numbers.
3291 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3293 * d10v-dis.c: Change all functions to use info->print_address_func.
3295 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3297 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3298 move ccr/sr insns more strict so that the disassembler only
3299 selects them when the addressing mode is data register.
3301 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3302 * d10v-opc.c (pre_defined_registers): Declare.
3303 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3304 to pick a better name for the registers.
3306 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3308 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3309 operands for fexpand and fpmerge. From Christian Kuehnke
3310 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3312 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3314 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3315 print routine. Take new regnames and cpumask arguments.
3316 Kill the environment variable nonsense.
3317 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3318 (print_insn_alpha_vms): New function. Do VMS style regnames.
3319 * disassemble.c (disassembler): Test bfd flavour to pick
3320 between OSF and VMS routines. Default to OSF.
3322 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3324 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3325 * configure: Rebuild.
3326 * Makefile.in (install): Use @INSTALL_SHLIB@.
3328 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3330 * configure: (bfd_d10v_arch) Add new case.
3331 * configure.in: (bfd_d10v_arch) Add new case.
3332 * d10v-dis.c: New file.
3333 * d10v-opc.c: New file.
3334 * disassemble.c (disassembler) Add entry for d10v.
3336 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3338 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3339 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3341 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3343 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3344 distinguish between variants of the instruction set.
3345 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3346 distinguish between variants of the instruction set.
3348 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3350 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3351 the 8086 instruction set.
3352 * i386-dis.c: General cleanups. Make most things static. Add
3353 prototypes. Get rid of static variables aflags and dflags. Pass
3354 them as args (to almost everything).
3356 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3358 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3360 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3362 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3363 if the next arg is marked with SRC_IN_DST. Gross.
3365 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3366 we're looking for and find EXR.
3368 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3369 if we're looking for KBIT and we don't find it.
3371 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3374 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3375 3bit immediate operands.
3377 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3379 * Released binutils 2.7.
3381 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3382 <kkaempf@progis.ac-net.de>.
3384 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3386 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3388 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3390 * sparc-dis.c (print_insn_sparclite): New routine to print
3391 sparclite instructions.
3393 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3395 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3397 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3399 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3400 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3401 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3403 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3405 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3406 Use autoconf-set values.
3407 (docdir, oldincludedir): Removed.
3408 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3410 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3412 * alpha-opc.c: New file.
3413 * alpha-opc.h: Remove.
3414 * alpha-dis.c: Complete rewrite to use new opcode table.
3415 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3416 * configure: Rebuild with autoconf 2.10.
3417 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3418 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3420 (alpha-opc.o): New target.
3422 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3424 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3425 Set imm_added_to_rs1 even if the source and destination register
3428 * sparc-opc.c: Add some two operand forms of the wr instruction.
3430 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3432 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3435 * disassemble.c (disassembler): Handle H8/S.
3436 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3438 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3440 * sparc-opc.c: Add beq/teq as aliases for be/te.
3442 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3443 <sergei@msil.sps.mot.com>.
3445 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3447 * makefile.vms: New file.
3449 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3451 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3453 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3456 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3458 * i386-dis.c (OP_OFF): Call append_prefix.
3460 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3462 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3463 unsigned long to silence a warning from the Solaris PowerPC
3466 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3468 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3470 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3472 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3474 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3475 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3476 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3477 cpush, cpusha, cpull sparclet insns.
3479 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3481 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3483 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3485 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3486 Set F_FLOAT on other floating point instructions.
3488 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3490 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3492 (powerpc_opcodes): Add 860/821 specific SPRs.
3494 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3496 * configure.in: Permit --enable-shared to specify a list of
3497 directories. Set and substitute BFD_PICLIST.
3498 * configure: Rebuild.
3499 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3500 uses. Set to @BFD_PICLIST@.
3502 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3504 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3505 not "abs", which may be needed for the absolute in something
3506 like btst #0,@10:8. Print L_3 immediates separately from other
3507 immediates. Change ABSMOV reference to ABS8MEM.
3509 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3511 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3512 (current_arch_mask): New static global.
3513 (compute_arch_mask): New static function.
3514 (print_insn_sparc): Delete sparc_v9_p. New static local
3515 current_mach. Resort opcode table if current_mach changes.
3516 Generalize "insn not supported" test.
3517 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3518 Delete test for v9/!v9.
3519 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3521 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3522 (brfcx): Renamed to FBRX.
3523 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3524 coprocessor mnemonics are not supported on the sparclet).
3525 (condf): Renamed to CONDF.
3526 (SLCBCC2): Delete F_ALIAS flag.
3528 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3530 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3531 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3533 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3535 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3536 that the shared library version number is set correctly.
3538 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3540 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3541 Miles Bader <miles@gnu.ai.mit.edu>.
3542 * configure: Rebuild.
3544 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3546 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3549 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3551 * configure: Rebuild with autoconf 2.8.
3553 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3555 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3556 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3558 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3560 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3561 since they appear as targets in Makefile.in.
3562 * configure: Rebuild.
3564 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3566 * mpw-make.sed: Edit out shared library support bits.
3568 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3570 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3571 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3572 (sparc_opcodes): Add sparclet insns.
3573 (sparclet_cpreg_table): New static local.
3574 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3575 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3577 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3579 * i386-dis.c (index16): New static variable.
3580 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3582 (OP_indirE): Return result of OP_E.
3583 (OP_E): Check for 16 bit addressing mode, and disassemble
3584 correctly. Optimised 32 bit case a little. Don't print
3585 "(base,index,scale)" when sib specifies only an offset.
3587 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3589 * configure.in: Set and substitute SHLIB_DEP.
3590 * configure: Rebuild.
3591 * Makefile.in (SHLIB_DEP): New variable.
3592 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3593 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3594 COMMON_SHLIB, add them to piclist with appropriate modifications.
3595 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3596 here: just use piclist.
3598 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3600 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3601 (print_insn_sparc): Rewrite v9/not-v9 tests.
3602 (compare_opcodes): Likewise.
3603 * sparc-opc.c (MASK_<ARCH>): Define.
3604 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3605 (sparclet,v6notv9): Define.
3606 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3607 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3609 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3611 * configure.in: Call AC_PROG_CC before configure.host.
3612 * configure: Rebuild.
3614 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3616 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3618 * i386-dis.c (onebyte_has_modrm): New static array.
3619 (twobyte_has_modrm): New static array.
3620 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3622 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3624 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3627 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3629 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3632 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3634 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3635 m68010up, not just m68020up | cpu32.
3637 * Makefile.in (SONAME): New variable.
3638 ($(SHLINK)): Make a link to the transformed name, as well.
3639 (stamp-tshlink): New target.
3640 (install): Skip stamp-tshlink during install.
3642 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3644 * configure.in: Call AC_ARG_PROGRAM.
3645 * configure: Rebuild.
3646 * Makefile.in (program_transform_name): New variable.
3647 (install): Transform library name before installing it.
3649 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3651 * i960-dis.c (mem): Add HX dcinva instruction.
3653 Support for building as a shared library, based on patches from
3654 Alan Modra <alan@spri.levels.unisa.edu.au>:
3655 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3656 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3657 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3658 * configure: Rebuild.
3659 * Makefile.in (ALLLIBS): New variable.
3660 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3661 (COMMON_SHLIB, SHLINK): New variables.
3662 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3663 (STAGESTUFF): Remove variable.
3664 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3665 (stamp-piclist, piclist): New targets.
3666 ($(SHLIB), $(SHLINK)): New targets.
3667 ($(OFILES)): Depend upon stamp-picdir.
3668 (disassemble.o): Build twice if PICFLAG is set.
3669 (MOSTLYCLEAN): Add pic/*.o.
3670 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3671 (distclean): Remove pic and stamp-picdir.
3672 (install): Install shared libraries.
3673 (stamp-picdir): New target.
3675 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3677 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3678 Print unknown instruction as "unknown", rather than in hex.
3680 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3682 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3684 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3686 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3688 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3690 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3691 when necessary. From Ulrich Drepper
3692 <drepper@myware.rz.uni-karlsruhe.de>.
3694 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3696 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3697 sparc_num_opcodes. Update architecture enum values.
3698 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3699 (sparc_opcode_lookup_arch): New function.
3700 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3701 (sparc_opcodes): Add v9a shutdown insn.
3703 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3705 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3706 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3708 (print_insn_sparc64): Deleted.
3709 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3712 * sparc-opc.c (architecture_pname): Add v9a.
3714 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3716 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3717 incorrectly defined as 0x16 when it should be 0x15.
3718 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3719 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3720 excb (exception barrier) which is defined in the Alpha
3721 Architecture Handbook version 2.
3722 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3723 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3724 disassembled as or, for example.
3726 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3728 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3729 (_print_insn_mips): Change i from int to unsigned int.
3731 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3733 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3734 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3736 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3738 * i386-dis.c: Added Pentium Pro instructions.
3740 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3742 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3745 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3747 * sh-opc.h (sh_nibble_type): Added REG_B.
3748 (sh_arg_type): Added A_REG_B.
3749 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3751 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3753 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3755 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3757 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3759 * Makefile.in (distclean): Remove stamp-h. From Ronald
3760 F. Guilmette <rfg@monkeys.com>.
3762 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3764 From David Mosberger-Tang <davidm@azstarnet.com>:
3765 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3768 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3770 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3771 (sh_table): Added many SH3 opcodes.
3772 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3774 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3776 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3777 (subco,subco.): Mark this PPC, not PPCCOM.
3779 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3781 * configure: Rebuild with autoconf 2.7.
3783 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3785 * configure: Rebuild with autoconf 2.6.
3787 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3789 * configure.in: Sort list of architectures. Accept but do nothing
3790 for alliant, convex, pyramid, romp, and tahoe.
3792 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3794 * a29k-dis.c (print_special): Change num to unsigned int.
3796 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3798 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3801 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3803 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3804 * configure: Rebuilt.
3806 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3808 * configure.in: Add case for bfd_i860_arch.
3809 * configure: Rebuild.
3811 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3813 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3814 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3815 (NEXTDOUBLE): Likewise.
3816 (print_insn_m68k): Don't match fmoveml if there is more than one
3817 register in the list.
3818 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3820 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3822 * m68k-opc.c: Use #W rather than #w.
3823 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3825 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3827 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3828 and likewise for all the dbxx opcodes.
3830 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3832 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3834 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3836 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3837 the VR4100 specific instructions to the mips_opcodes structure.
3839 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3841 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3842 ugly Metrowerks bug in CW6, is fixed in CW7.
3844 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3846 * ppc-opc.c (whole file): Add flags for common/any support.
3848 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3850 * Makefile.in (BISON): Remove macro.
3851 (FLAGS_TO_PASS): Remove BISON.
3853 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3855 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3857 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3858 instructions that take no args by looking at the match mask.
3859 (print_insn_arg): Always print "%" before register names.
3860 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3861 [case '_']: Don't print "@#" before address.
3862 [case 'J']: Use "%s" as format string, not register name.
3863 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3865 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3867 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3870 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3872 From David Mosberger-Tang <davidm@azstarnet.com>
3874 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3875 (alpha_insn_set): added definitions for VAX floating point
3876 instructions (Unix compilers don't generate these, but handcoded
3877 assembly might still use them).
3879 * alpha-dis.c (print_insn_alpha): added support for disassembling
3880 the miscellaneous instructions in the Alpha instruction set.
3882 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3884 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3885 no longer create sysdep.h, sed ppc-opc.c to work around a
3886 serious Metrowerks C bug.
3887 * mpw-make.in: Remove.
3888 * mpw-make.sed: New file, used by mpw-configure to edit
3889 Makefile.in into an MPW makefile.
3891 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3893 * Makefile.in (maintainer-clean): New synonym for realclean.
3895 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3897 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3898 which use '0', '1', and '2' instead. Specify the proper size for
3899 a pmove immediate operand. Correct the pmovefd patterns to be
3900 moves to a register, not from a register.
3901 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3903 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3905 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3906 %psr, %wim, %tbr as F_NOTV9.
3908 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3910 * Makefile.in (Makefile): Just rebuild Makefile when running
3912 (config.h, stamp-h): New targets.
3913 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3914 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3915 rebuilding config.h.
3916 * configure: Rebuild.
3918 * mips-opc.c: Change unaligned loads and stores with "t,A"
3919 operands to use "t,A(b)".
3921 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3923 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3925 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3927 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3928 until 3 instead of until 2.
3930 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3932 * Makefile.in (ALL_CFLAGS): Define.
3933 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3934 (MOSTLYCLEAN): Add config.log.
3935 (distclean): Don't remove config.log.
3936 * configure.in: Substitute HDEFINES.
3937 * configure: Rebuild.
3939 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3941 * sh-opc.h (sh_arg_type): Add F_FR0.
3942 (sh_table, case fmac): Add F_FR0 as first argument.
3944 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3946 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3948 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3950 * sparc-dis.c: Remove all references to NO_V9.
3952 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3954 * aclocal.m4: Just include ../bfd/aclocal.m4.
3955 * configure: Rebuild.
3957 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3959 * sparc-dis.c (X_DISP19): Define.
3960 (print_insn, case 'G'): Use it.
3961 (print_insn, case 'L'): Sign extend displacement.
3963 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3965 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3966 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3967 host_makefile_frag or frags.
3968 * aclocal.m4: New file.
3969 * configure: Rebuild.
3970 * Makefile.in (INSTALL): Set to @INSTALL@.
3971 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3972 (INSTALL_DATA): Set to @INSTALL_DATA@.
3974 (AR_FLAGS): Set to rc rather than qc.
3975 (CC): Define as @CC@.
3976 (CFLAGS): Set to @CFLAGS@.
3977 (@host_makefile_frag@): Remove.
3978 (config.status): Remove dependency upon @frags@.
3980 * configure.in: ../bfd/config.bfd now just sets shell variables.
3981 Use them rather than looking through target Makefile fragments.
3982 * configure: Rebuild.
3984 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3986 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3988 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3990 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3991 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3994 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3995 (lookup_{name,value}): New functions.
3996 (prefetch_table): New static local.
3997 (sparc_{encode,decode}_prefetch): New functions.
3998 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4000 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4002 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4005 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4007 * sh-dis.c: Correct comment on first line of file.
4009 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4011 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4013 * sparc-opc.c (asi, membar): New static locals.
4014 (sparc_{encode,decode}_{asi,membar}): New functions.
4015 (sparc_opcodes, membar insn): Fix.
4016 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4017 Support decoding of membar masks.
4020 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4022 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4024 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4026 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4027 and likewise for the other branches. Add bhs as an alias for bcc,
4028 and likewise for the size variants. Add dbhs as an alias for
4031 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4033 * sh-opc.h (FP sts instructions): Update to match reality.
4035 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4037 * m68k-dis.c: (fpcr_names): Add % before all register names.
4038 (reg_names): Likewise.
4039 (print_insn_arg): Don't explicitly print % before register names.
4040 Add % before register names in static array names. In case 'r',
4041 print data registers as `@(Dn)', not `Dn@'. When printing a
4042 memory address, don't print @# before it.
4043 (print_indexed): Change base_disp and outer_disp from int to
4044 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4045 syntax. Sign extend 8 byte displacement correctly.
4046 (print_base): Print using MIT syntax. Print zpc when appropriate.
4047 Change parameter disp from int to bfd_vma.
4049 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4052 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4054 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4055 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4056 * sh-opc.h (sh_arg_type): Add new operand types.
4057 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4059 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4061 * Makefile.in (distclean): Remove generated file config.h.
4063 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4065 * Makefile.in (distclean): Remove generated file config.h.
4067 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4069 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4071 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4073 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4074 rather than numopcodes. Use m68k_opcodes rather than removed
4075 opcode function. Don't check F_ALIAS.
4076 (print_insn_arg): Change first parameter to be const char *.
4077 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4078 (m68k-opc.o): New target.
4079 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4080 * configure: Rebuild.
4082 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4084 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4085 (opcode_bits, opcode_hash_table): New variables.
4086 (opcodes_initialized): Renamed from opcodes_sorted.
4087 (build_hash_table): New function.
4088 (is_delayed_branch): Use hash table.
4089 (print_insn): Renamed from print_insn_sparc, made static.
4090 Build and use hash table. If !sparc64, ignore sparc64 insns,
4091 and vice-versa if sparc64.
4092 (print_insn_sparc, print_insn_sparc64): New functions.
4093 (compare_opcodes): Move sparc64 opcodes to end.
4094 Print commutative insns with constant second.
4095 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4097 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4099 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4100 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4101 avoids printing a delay slot in a delay slot.
4102 * sh-opc.h (sh_table): Fully bracket last entry.
4104 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4106 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4108 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4110 * configure.in: Get host_makefile_frag from ${srcdir}.
4112 * configure.in: Autoconfiscated. Check for string[s].h. Create
4113 config.h from config.in. Don't set up sysdep.h link.
4114 * sysdep.h: New file.
4115 * configure, config.in: New files, generated from configure.in.
4116 * Makefile.in: Updated to be processed autoconf-style.
4117 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4118 (Makefile): Depend on config.status.
4119 (config.status): New rule.
4120 * configure.bat: Update Makefile substitutions.
4122 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4124 * mips-opc.c (L1): Define.
4125 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4126 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4129 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4131 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4132 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4133 have multiple add units but only a single logical unit.
4135 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4136 shifted by 18, without any insertion or extraction function.
4137 (insert_cr, extract_cr): Remove.
4139 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4141 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4144 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4146 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4147 * sh-opc.h: Add copyright.
4149 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4151 * Makefile.in (crunch-m68k): Delete extra target accidentally
4152 checked in a while ago.
4154 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4156 * sh-opc.h (sh_table): Add SH3 support.
4158 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4160 * sh-opc.h: Added bsrf and braf.
4162 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4164 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4165 bogus [ls]fm{ea,fd} patterns.
4167 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4168 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4169 initialize it from memory. Make function static.
4170 (print_insn_{big,little}_arm): New functions.
4171 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4172 the correct endianness.
4174 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4176 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4179 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4181 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4182 17th, so that it builds again using GCC as the compiler.
4184 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4186 * mips-dis.c (print_insn_little_mips): Cast return value from
4187 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4188 expects an unsigned long, and that might be fewer words of
4189 argument storage (e.g., if bfd_vma is long long on a 32-bit
4191 (print_insn_big_mips): Likewise with bfd_getb32 value.
4192 (_print_insn_mips): Now static.
4194 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4196 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4197 gcc memory hog problem with initializer is fixed.
4199 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4201 Merge in support for Mac MPW as a host.
4202 (Old change descriptions retained for informational value.)
4204 * mpw-config.in (archname): Compute from the config.
4205 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4207 * mpw-config.in (target_arch): Compute from canonical target.
4208 (m68k, mips, powerpc, sparc): Add architectures.
4209 * mpw-make.in (disassemble.c.o): Add.
4210 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4212 * mpw-config.in (BFD_MACHINES): Set to a default value.
4213 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4215 * mpw-make.in (CSEARCH): Add extra-include to search path.
4217 * mpw-config.in (varargs.h): Don't create.
4218 (sysdep.h): Create using forward-include.
4219 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4221 * mpw-config.in: New file, MPW version of configure.in.
4222 * mpw-make.in: New file, MPW version of Makefile.in.
4224 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4226 * alpha-dis.c (print_insn_alpha): Put empty statement after
4229 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4231 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4232 (low_sign_extend): Likewise.
4233 (get_field): Delete unused function.
4234 (set_field, deposit_14, deposit_21): Likewise.
4236 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4238 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4241 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4243 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4245 * alpha-opc.h (OSF_ASMCODE): define
4246 print pal-code names as defined in App C of the
4247 Alpha Architecture Reference Manual
4249 * alpha-dis.c: cleaned up output
4250 print stylized code forms as defined in App A.4.3 of the
4251 Alpha Architecture Reference Manual
4253 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4255 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4257 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4260 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4262 * m68k-dis.c (opcode): New function. Returns address of opcode
4263 table entry given index, even if the opcode table was split to
4264 work around gcc bugs.
4265 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4267 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4268 (reg_names): Now const.
4269 (print_insn_arg): Arrays cacheFieldName and names now const.
4270 (print_indexed): Array scales now const.
4272 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4274 * ppc-opc.c: Sort recently added instructions by minor opcode
4275 number within major opcode number.
4277 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4279 * hppa-dis.c: Include libhppa.h.
4281 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4283 * mips-opc.c: Change dli to use M_DLI, and add dla.
4285 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4287 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4289 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4291 * mips-opc.c: Add r4650 mul instruction.
4293 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4295 * mips-opc.c: Add uld and usd macros for unaligned double load and
4298 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4300 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4301 mfdcr, mtdcr, icbt, iccci.
4303 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4305 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4306 signed char fields to shorts, more portable.
4308 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4310 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4311 char fields as signed chars, since they may have negative values.
4313 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4315 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4316 (mycroft@netbsd.org).
4318 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4320 From "Logg, Ed" <elogg@ea.com>:
4321 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4322 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4325 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4327 * ppc-opc.c: Changes based on patch from David Edelsohn
4328 <edelsohn@mhpcc.edu>.
4329 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4332 (insert_tbr): New static function.
4333 (extract_tbr): New static function.
4334 (XFXFXM_MASK, XFXM): Define.
4335 (XSPRBAT_MASK, XSPRG_MASK): Define.
4336 (powerpc_opcodes): Add instructions to access special registers by
4337 name. Add mtcr and mftbu.
4339 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4341 * mips-opc.c (P3): Define.
4342 (mips_opcodes): Add mad and madu.
4344 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4346 * configure.in: Add W65 support.
4347 * disassemble.c: Likewise.
4348 * w65-opc.h, w65-dis.c: New files.
4350 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4352 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4355 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4357 * mips-opc.c: Add dli as a synonym for li.
4359 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4361 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4362 print something for reserved opcode values, even if it won't
4365 * mips-dis.c (_print_insn_mips): When initializing, shift right
4366 and mask, to avoid sign extension problems on the Alpha.
4368 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4371 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4373 * sh-opc.h (mov.l gbr): Get direction right.
4374 * sh-dis.c (print_insn_shx): New function.
4375 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4376 print opcodes with right byte order.
4378 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4380 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4381 to avoid conflicts with getopt.
4383 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4385 * hppa-dis.c (print_insn_hppa): Read the instruction using
4386 bfd_getb32, so that it works on a little endian or 64 bit host.
4387 Remove unused local variable op.
4389 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4391 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4392 addu does not work correctly if -mips3.
4394 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4396 * a29k-dis.c (print_special): Add special register names defined
4397 on 29030, 29040 and 29050.
4398 (print_insn): Handle new operand type 'I'.
4400 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4402 * Makefile.in (INSTALL): Use top level install.sh script.
4404 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4406 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4407 that it works on a little endian host.
4409 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4411 * configure.in: Use ${config_shell} when running config.bfd.
4413 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4415 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4417 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4419 * a29k-dis.c (print_insn): Print the opcode.
4421 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4423 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4425 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4427 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4429 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4431 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4432 which store a value into memory.
4434 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4436 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4437 * arm-dis.c, arm-opc.h: New files.
4439 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4441 * Makefile.in (ns32k-dis.o): Add dependency.
4442 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4443 string, not as array of chars.
4445 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4447 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4449 * sparc-opc.c: Added sparclite extended FP operations, and
4450 versions of v9 impdep* instructions permitting specification of
4453 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4455 * i960-dis.c (reg_names): Now const.
4456 (struct sparse_tabent): New type, copied from array type in mem
4458 (ctrl): Local static array ctrl_tab now const.
4459 (cobr): Local static array cobr_tab now const.
4460 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4461 static variable mem_tab no longer explicitly initialized. Changed
4462 mem_init to const array of struct sparse_tabent.
4463 (reg): Local static variable reg_tab no longer explicitly
4464 initialized. Changed reg_init to const array of struct
4466 (ea): Local static array scale_tab now const.
4468 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4471 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4473 * configure.bat: the disassember needs to be enabled for
4474 "objdump -d" to work in djgpp.
4476 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4478 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4479 (invalid_float): Enabled general version, doesn't require running
4480 on ns32k host. Changed to take char* argument, and test for
4481 explicitly specified sizes, instead of using sizeof() on host CPU
4483 (INVALID_FLOAT): Cast first argument.
4484 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4485 list_P032, list_M032): Now const.
4486 (optlist, list_search): Made appropriate arguments now point to
4488 (print_insn_arg): Changed static array of one-character-string
4489 pointers into a static const array of characters; fixed sprintf
4490 statement accordingly.
4492 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4494 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4495 from distribution. A ns32k-dis.c from a previous distribution has
4496 been brought up to date and supports the new interface.
4498 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4500 * configure.in: add bfd_ns32k_arch target support.
4502 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4503 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4505 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4507 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4510 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4512 * h8300-dis.c, mips-dis.c: Don't use true and false.
4514 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4516 * configure.in: Change --with-targets to --enable-targets.
4518 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4520 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4521 opcodes to the first instruction with that opcode, to speed
4522 disassembly of large files. From ralphc@pyramid.com (Ralph
4525 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4527 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4529 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4531 * configure.bat: update to latest makefile.in
4533 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4535 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4536 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4537 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4538 slot insn is in a delay slot.
4539 * z8k-opc.h: (resflg): Fix patterns.
4540 * h8500-opc.h Fix CR insn patterns.
4542 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4544 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4545 "cmpl" before POWER versions, so that gas -many uses them.
4547 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4549 * disassemble.c: New file.
4550 * Makefile.in (OFILES): Add disassemble.o.
4551 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4552 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4553 binutils/configure.in.
4555 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4556 opcode being examined.
4558 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4560 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4561 (insert_ral, insert_ram, insert_ras): New functions.
4562 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4563 RAS for store with update.
4565 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4568 (edelsohn@npac.syr.edu).
4570 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4572 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4575 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4577 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4579 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * ppc-opc.c (powerpc_operands): The signedp field has been
4582 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4583 instead. Add new operand SISIGNOPT.
4584 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4585 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4586 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4589 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4591 * i386-dis.c (struct private): Renamed to dis_private. `private'
4592 is a reserved word for dynix cc.
4594 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4596 * configure.in: Change error message to refer to bfd/config.bfd
4597 rather than bfd/configure.in.
4599 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4601 * ppc-opc.c: Define POWER2 as short alias flag.
4602 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4605 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4607 * i960-dis.c (print_insn_i960): Don't read a second word for
4608 opcodes 0, 1, 2 and 3.
4610 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4612 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4614 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * m68881-ext.c: Removed; no longer used.
4617 * Makefile.in: Changed accordingly.
4619 * m68k-dis.c (ext_format_68881): Don't declare.
4620 (print_insn_m68k): If an instruction uses place 'i', it uses at
4621 least four fixed bytes.
4622 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4623 extended float, convert to double using floatformat_to_double, not
4624 ieee_extended_to_double, and fetch the data before converting it.
4626 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4628 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4629 davidj@ICSI.Berkeley.EDU (David Johnson).
4631 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4633 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4634 PowerPC uses bdnz[l][a].
4636 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4638 * dis-buf.c, i386-dis.c: Include sysdep.h.
4640 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4642 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4644 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4645 by Motorola PowerPC 601 with PPC_OPCODE_601.
4646 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4647 Disassemble Motorola PowerPC 601 instructions as well as normal
4648 PowerPC instructions.
4650 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4652 * i960-dis.c (reg, mem): Just use a static array instead of
4655 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4657 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4658 condition name index if this is for a negated condition.
4660 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4661 Floating point format for 'H' operand is backwards from normal
4662 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4663 operands (fmpyadd and fmpysub), handle bizarre register
4664 translation correctly for single precision format.
4666 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4667 or 'I' operands if the next format specifier is 'M' (fcmp
4668 condition completer).
4670 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4672 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4673 single number giving a bitmask for the MB and ME fields of an M
4674 form instruction. Change NB to accept 32, and turn it into 0;
4675 also turn 0 into 32 when disassembling. Seperated SH from NB.
4676 (insert_mbe, extract_mbe): New functions.
4677 (insert_nb, extract_nb): New functions.
4678 (SC_MASK): Mask out SA and LK bits.
4679 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4680 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4681 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4682 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4683 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4684 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4685 (powerpc_macros): Define table of macro definitions.
4686 (powerpc_num_macros): Define.
4688 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4689 if PPC_OPERAND_NEXT is set.
4691 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4693 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4694 char. Retrieve contents using bfd_getl32 instead of shifting.
4696 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4698 * ppc-opc.c: New file. Opcode table for PowerPC, including
4699 opcodes for POWER (RS/6000).
4700 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4701 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4702 (CFILES): Add ppc-dis.c.
4703 (ppc-dis.o, ppc-opc.o): New targets.
4704 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4706 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4708 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4709 No space before 'u', 'f', or 'N'.
4711 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4713 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4714 farther than we should.
4716 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4718 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4720 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4722 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4724 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4725 needs it, to prevent reading past the end of a section.
4727 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4729 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4730 Removed t,A case for la; always use t,A(b) case.
4732 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4734 From Ted Lemen <mellon@pepper.ncd.com>
4735 * mips-dis.c (print_insn_arg): Handle 'k'.
4736 * mips-opc.c: Make cache use k, not t.
4738 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4740 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4741 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4742 FLOAT_FORMAT_CODE to put out floating point register names.
4744 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4746 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4748 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4750 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4752 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4754 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4755 larger than 32. Moved dsxx32 variants first for disassembler.
4757 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4759 * z8kgen.c, z8k-opc.h: Add full lda information.
4761 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4763 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4764 movb instructions. Any necessary space will be emitted by
4765 the code to handle nullification completers.
4767 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4771 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4773 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4774 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4776 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4778 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4780 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4782 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4783 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4785 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4787 * m88k-dis.c (m88kdis): comment change. Remove space after
4789 (printop): handle new arg types DEC and XREG for m88110.
4791 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4793 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4794 type for absolute branch addresses. Delete special
4795 "ble" and "be" code in 'W' operand code.
4797 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4799 * mips-opc.c: Set hazard information correctly for branch
4800 likely instructions.
4802 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4804 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4805 info->fprintf_func for printing and info->print_address_func for
4808 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4810 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4812 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4814 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4815 Corrected second case of "b" for disassembler.
4817 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4819 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4820 to BFD swapping routines to correspond to BFD name changes.
4822 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4824 * mips-opc.c: Change div machine instruction to be z,s,t rather
4825 than s,t. Change div macro to be d,v,t rather than d,s,t.
4826 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4827 rem and remu which generates only the corresponding div
4828 instruction. This is for compatibility with the MIPS assembler,
4829 which only generates the simple machine instruction when an
4830 explicit destination of $0 is used.
4831 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4833 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4835 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4836 WR_31 hazard for bal, bgezal, bltzal.
4838 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4840 * hppa-dis.c (print_insn_hppa): Use print function
4841 from within the disassemble_info, not fprintf_filtered.
4843 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4845 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4846 Law, law@cs.utah.edu.)
4848 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4850 * mips-opc.c ("absu"): Removed.
4853 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4855 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4856 Changed hazard information to distinguish between memory load
4857 delays and coprocessor load delays.
4859 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4861 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4863 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4865 * configure.in: Don't pass cpu to config.bfd.
4867 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4869 * m88k-dis.c (m88kdis): Make class unsigned.
4871 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4873 * alpha-dis.c (print_insn_alpha): One branch format case was
4874 missing the instruction name.
4876 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4878 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4879 Add the arch-specific auxiliary files.
4880 (OFILES): Remove the arch-specific auxiliary files
4881 and use BFD_MACHINES instead of DIS_LIBS.
4882 * configure.in: Set BFD_MACHINES based on --with-targets option.
4884 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4886 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4889 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4891 * sparc-opc.c: Change CONST to const to deal with gcc
4892 -Dconst=__const -traditional.
4894 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4897 coprocessor instructions out of #if 0, and made them use new
4900 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4902 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4904 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4906 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4907 instruction, for use by the disassembler.
4909 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4910 hand-coded sign extensions that depended on 32-bit host ints.
4911 FIXME, we still depend on big-endian host bitfield ordering.
4912 (sparc_print_insn): Set the insn_info_valid field, and the
4913 other fields that describe the instruction being printed.
4915 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4917 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4918 `jmp' instead of just one of them.
4920 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4922 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4923 (fput_fp_reg_r): Renamed from fput_reg_r.
4924 (fput_fp_reg): New function.
4925 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4927 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4929 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4931 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4933 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4935 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4936 don't output a space.
4938 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4940 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4942 * mips-opc.c: New file, containing opcode table from
4943 ../include/opcode/mips.h.
4944 * Makefile.in: Add it.
4946 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4948 * m88k-dis.c: New file, moved in from gdb and changed to use the
4949 new dis-asm.h disassembler interface.
4950 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4951 (m88k-dis.o): New target.
4953 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4955 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4956 argument string const char * to correspond to opcode/mips.h.
4958 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4960 * mips-dis.c: Updated to account for name changes in new version
4962 * Makefile.in: Added header file dependencies.
4964 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4966 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4968 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4970 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4971 extend, rather than shifts.
4973 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4975 * Makefile.in: Undo 15 June change.
4977 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4979 * m68k-dis.c (print_insn_arg): Change return value to byte count
4981 * m68k-dis.c: Re-write to detect invalid operands before
4982 printing anything, so we can handle this the same way we
4983 handle invalid opcodes.
4985 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4987 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4989 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4991 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4994 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4996 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4998 * configure.in: Do make sysdep.h link.
4999 * Makefile.in: Search ../include. Don't search ../bfd.
5001 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5003 Changes from Jeff Law, law@cs.utah.edu:
5004 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5005 Do not print a space before the completers specified by
5008 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5010 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5011 defined, since gdb has been fixed.
5013 Changes from Jeff Law, law@cs.utah.edu:
5014 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5015 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5016 be a *disassemble_info, not a *FILE.
5017 * hppa-dis.c: Support 'd', '!', and 'a'.
5018 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5019 * hppa-dis.c: Delete cases which are no longer needed.
5021 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5023 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5025 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5027 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5030 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5032 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5033 * configure.in: No longer need to configure to get sysdep.h.
5035 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5037 * Patches from Jeffrey Law <law@cs.utah.edu>.
5038 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5039 templates for 1.1 FP computational instructions.
5041 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5043 * h8500-dis.c (print_insn_h8500): Address argument is type
5045 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5048 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5049 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5051 * sparc-dis.c (compare_opcodes): Move static declaration to
5054 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5056 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5057 instruction, remove unimp hack from 'l' argument.
5059 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5061 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5064 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5066 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5067 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5070 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5072 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5073 arrays of string pointers to 2-d arrays of chars, to save
5076 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5078 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5079 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5081 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5083 * hppa-dis.c: New file from Utah, adapted to new disassembler
5085 * Makefile.in: Include it.
5087 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5089 * sh-dis.c, sh-opc.h: New files.
5091 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5093 * alpha-dis.c, alpha-opc.h: New files.
5095 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5097 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5100 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5102 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5104 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5106 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5109 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5111 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5112 and double percent signs a few places.
5114 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5116 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5117 Use info->print_address_func not print_address.
5119 * dis-buf.c (generic_print_address): New function.
5121 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5123 * Makefile.in: Add sparc-dis.c.
5124 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5126 Add `add' instruction to the set that get checked
5127 for a preceding `sethi' in order to print an absolute address.
5128 * (print_insn): Disassembly prefers real instructions.
5129 (is_delayed_branch): Speed up.
5130 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5131 Still missing some float ops, and needs testing.
5132 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5133 F_ALIAS. Use printf, not fprintf, when not passing a file
5135 (compare_opcodes): Check that identical instructions have
5136 identical opcodes, complain otherwise.
5139 * Include reg_names.
5141 Use dis-asm.h/read_memory_func interface.
5143 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5145 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5146 deliberately return non-zero to setjmp from longjmp. Otherwise
5147 this code fails to compile.
5149 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5151 * m68k-dis.c: Fix prototype for fetch_arg().
5153 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5155 * dis-buf.c: New file, for new read_memory_func interface.
5156 Makefile.in (OFILES): Include it.
5157 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5158 Use new read_memory_func interface.
5160 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5162 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5163 * h8500-opc.h: Fix couple of opcodes.
5165 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5167 * Makefile.in: add dvi & installcheck targets
5169 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5171 * Makefile.in: Update for h8500-dis.c.
5173 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5175 * h8500-dis.c, h8500-opc.h: New files
5177 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5179 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5180 ../include/dis-asm.h.
5181 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5182 and ../gdb/m68k-pinsn.c).
5183 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5184 and ../gdb/i386-pinsn.c).
5185 * m68881-ext.c: New file. Moved definition of
5186 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5187 * Makefile.in: Adjust for new files.
5188 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5189 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5190 can be dis-assembled.
5192 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5194 * mips-dis.c (print_insn_arg): Now returns void.
5196 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5198 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5199 files that use the macros.
5201 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5203 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5204 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5205 (CFILES): Added mips-dis.c.
5207 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5209 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5210 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5212 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5214 * Makefile.in: Improve *clean rules.
5215 * configure.in: Allow a default host.
5217 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5219 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5220 files include other sysdep files
5222 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5224 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5226 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5228 * configure.in: For host support, use ../bfd/configure.host
5229 so it stays in sync with the ../bfd/hosts database.
5231 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5233 * configure.in: use cpu-vendor-os triple instead of nested cases
5235 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5237 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5238 *always* the wrong one.
5240 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5242 * z8kgen.c: added copyright info
5244 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5246 * z8k-dis.c (unparse_instr): prettier tabs
5247 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5249 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5251 * configure.in: Add ncr* configuration.
5252 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5253 picayune ANSI compilers happy.
5255 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5257 * configure.in (i386): Make i386 and i486 synonymous for now.
5258 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5260 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5262 * Makefile.in (install): Fix typo.
5264 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5266 * Makefile.in (make): Remove obsolete crud.
5267 (sparc-opc.o): Avoid Sun Make VPATH bug.
5269 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5271 * Makefile.in: since there are no SUBDIRS, remove rule and
5272 references of subdir_do.
5274 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5276 * Makefile.in (install): Get the library name right here too.
5277 Don't install bfd.h, since it's unrelated to this library. No
5278 subdirs to recurse into, either.
5279 (CFILES): The source file has a .c suffix, not .o.
5281 * sparc-opc.c: New file, moved from BFD.
5282 * Makefile.in (OFILES): Build it.
5284 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5286 * z8k-dis.c: fixed forward refferences of some declarations.
5288 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5290 * Makefile.in: get the name of the library right
5292 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5294 * z8k-dis.c: knows how to disassemble z8k stuff
5295 * z8k-opc.h: new file full of z8000 opcodes
5299 version-control: never