1 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
3 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
5 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
7 * arm-dis.c: Add prototypes for arm_decode_shift and
10 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
12 * mips-opc.c: Add r3900 insns.
14 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
16 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
17 print delay slot instructions on the same line. When using a PC
18 relative load, add a comment with the value being loaded if it can
21 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
23 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
24 to pushS/popS for segment regs and byte constant so that
25 pushw/popw printed when in 16 bit data mode.
27 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
28 print cbtw, cwtd in 16 bit data mode.
29 * i386-dis.c (putop): extra case W to support above.
31 * i386-dis.c (print_insn_x86): print addr32 prefix when given
32 address size prefix in 16 bit address mode.
34 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
36 * sh-dis.c: Reindent. Rename local variable fprintf to
39 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
41 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
43 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
45 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
47 * mips16-opc.c (mip16_opcodes): same.
49 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
51 * m68k-opc.c (moveb): Change $d to %d.
53 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
55 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
56 (twobyte_has_modrm): Likewise.
58 (OP_MMX, OP_EM, OP_MS): New static functions.
60 * i386-dis.c: Revert patch of April 4. The output now matches
63 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
65 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
68 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
70 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
72 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
74 * Makefile.in (install): Depend upon installdirs.
75 (installdirs): New target.
77 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
79 From Thomas Graichen <graichen@rzpd.de>:
80 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
83 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
85 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
86 Delete string{,s}.h support.
88 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
90 * cgen-asm.c (cgen_parse_operand_fn): New global.
91 (cgen_parse_{{,un}signed_integer,address}): Update call to
92 cgen_parse_operand_fn.
93 (cgen_init_parse_operand): New function.
94 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
95 from cgen_asm_init_parse.
96 (m32r_cgen_assemble_insn): New operand `errmsg'.
97 Delete call to as_bad, return error message to caller.
98 (m32r_cgen_asm_hash_keywords): #if 0 out.
100 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
102 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
104 [case 'J']: Fix typo in register name.
106 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
108 * configure.in: Substitute SHLIB_LIBS.
109 * configure: Rebuild.
110 * Makefile.in (SHLIB_LIBS): New variable.
111 ($(SHLIB)): Use $(SHLIB_LIBS).
113 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
115 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
117 * cgen-opc.c (hash_keyword_name): Improve algorithm.
119 * disassemble.c (disassembler): Handle m32r.
121 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
123 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
124 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
125 * Makefile.in (CFILES): Add them.
126 (ALL_MACHINES): Add them.
127 (dependencies): Regenerate.
128 * configure.in (cgen_files): New variable.
129 (bfd_m32r_arch): Add entry.
130 * configure: Regenerate.
132 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
134 * configure.in: Correct file names for bfd_mn10[23]00_arch.
135 * configure: Rebuild.
137 * Makefile.in: Rebuild dependencies.
139 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
141 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
144 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
146 * Branched binutils 2.8.
148 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
150 * m10200-dis.c: Rename from mn10200-dis.c.
151 * m10200-opc.c: Rename from mn10200-opc.c.
152 * m10300-dis.c: Rename from mn10300-dis.c
153 * m10300-opc.c: Rename from mn10300-opc.c.
154 * Makefile.in: Update accordingly.
156 * mips16-opc.c: Add mul and dmul macros.
158 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
160 * makefile.vms: Update CFLAGS, add clean target.
162 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
164 * mips-opc.c: Add "wait". From Ralf Baechle
165 <ralf@gnu.ai.mit.edu>.
167 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
168 * configure, config.in: Rebuild.
169 * sysdep.h: Include <stdlib.h> if it exists.
170 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
172 * Makefile.in: Rebuild dependencies.
174 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
176 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
177 Andrew Bray <andy@madhouse.demon.co.uk>.
179 * mips-opc.c: Add cast when setting mips_opcodes.
182 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
184 * v850-dis.c (disassemble): Fix sign extension problem.
185 * v850-opc.c (extract_d*): Fix sign extension problems to make
186 disassembly calculate branch offsets correctly.
189 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
191 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
193 * mips-opc.c: Add dctr and dctw.
196 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
198 * d30v-dis.c (print_insn): Change the way signed constants
201 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
203 * Makefile.in (BFD_H): New variable.
204 (HFILES): New variable.
205 (CFILES): Add all C files.
206 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
207 Delete old dependencies, and build new ones.
208 * dep-in.sed: New file.
210 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
212 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
214 start-sanitize-coldfire
215 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
217 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
220 end-sanitize-coldfire
221 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
223 * mn10200-opc.c: Change "trap" to "syscall".
224 * mn10300-opc.c: Add new "syscall" instruction.
226 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
228 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
229 mulul insns on the coldfire.
231 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
233 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
234 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
235 (print_insn_little_arm): Likewise.
237 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
239 Based on patches from H.J. Lu <hjl@lucon.org>:
240 * i386-dis.c (fetch_data): Add prototype.
241 * m68k-dis.c (fetch_data): Add prototype.
242 (dummy_print_address): Add prototype. Make static.
243 * ppc-opc.c (valid_bo): Add prototype.
244 * sparc-dis.c (build_hash_table): Add prototype.
245 (is_delayed_branch, compute_arch_mask): Add prototypes.
246 (print_insn_sparc): Make several local variables const.
247 (compare_opcodes): Change arguments to const PTR. Add prototype.
248 * sparc-opc.c (arg): Change name field to be const.
249 (lookup_name, lookup_value): Add prototypes. Change table and
250 name parameters to be const.
251 (sparc_encode_asi): Change name parameter to be const.
252 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
253 (sparc_encode_sparclet_cpreg): Likewise.
254 (sparc_decode_asi): Change return type to be const.
255 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
256 (sparc_decode_sparclet_cpreg): Likewise.
258 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
260 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
261 Solaris doesn't like the combined options, and the -f is
263 (stamp-tshlink, install): Likewise.
265 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
267 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
270 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
272 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
274 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
276 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
279 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
281 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
284 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
286 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
288 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
290 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
293 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
295 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
296 floatformat_to_double to make portable.
297 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
300 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
302 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
303 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
305 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
307 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
308 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
311 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
313 * tic80-opc.c (LSI_SCALED): Renamed from this ...
314 (OFF_SL_BR_SCALED): ... to this, and added the flag
315 TIC80_OPERAND_BASEREL to the flags word.
316 (tic80_opcodes): Replace all occurances of LSI_SCALED with
320 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
322 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
323 Change mips_opcodes from const array to a pointer,
324 and change bfd_mips_num_opcodes from const int to int,
325 so that we can increase the size of the mips opcodes table
329 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
331 * tic80-opc.c (tic80_predefined_symbols): Revert change to
332 store BITNUM values in the table in one's complement form
333 to match behavior when assembler is given a raw numeric
334 value for a BITNUM operand.
335 * tic80-dis.c (print_operand_bitnum): Ditto.
339 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
341 * d30v-opc.c: Removed references to FLAG_X.
344 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
346 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
349 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
351 * Makefile.in: Added d30v object files.
352 * configure: (bfd_d30v_arch) Rebuilt.
353 * configure.in: (bfd_d30v_arch) Added new case.
354 * d30v-dis.c: New file.
355 * d30v-opc.c: New file.
356 * disassemble.c (disassembler) Add entry for d30v.
360 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
362 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
363 representations for the floating point BITNUM values.
365 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
367 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
368 in the table in one's complement form, as they appear in the
370 (tic80_symbol_to_value): Use macros to access predefined
372 (tic80_value_to_symbol): Ditto.
373 (tic80_next_predefined_symbol): New function.
374 * tic80-dis.c (print_operand_bitnum): Remove code that did
375 one's complement for BITNUM values.
379 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
381 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
384 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
386 * makefile.vms: Remove 8 bit characters. Update to latest
389 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
391 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
393 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
395 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
396 (IMM24_PCREL): Likewise.
398 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
400 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
401 address for an extended PC relative instruction that is not a
404 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
406 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
410 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
412 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
413 (tic80_opcodes): Sort entries so that long immediate forms
414 come after short immediate forms, making it easier for
415 assembler to select the right one for a given operand.
418 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
420 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
422 (print_insn_mips16): Likewise.
425 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
427 * mips-opc.c: add r5900.
431 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
433 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
434 a symbol class that restricts translation to just that
435 class (general register, condition code, etc).
437 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
439 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
440 and REG_DEST_E for register operands that have to be
441 an even numbered register. Add REG_FPA for operands that
442 are one of the floating point accumulator registers.
443 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
444 (tic80_opcodes): Change entries that need even numbered
445 register operands to use the new operand table entries.
446 Add "or" entries that are identical to "or.tt" entries.
449 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
451 * mips16-opc.c: Add new cases of exit instruction for
453 * mips-dis.c (print_mips16_insn_arg): Display floating point
454 registers in operands of exit instruction. Print `$' before
455 register names in operands of entry and exit instructions.
458 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
460 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
461 pairs for all predefined symbols recognized by the assembler.
462 Also used by the disassembling routines.
463 (tic80_symbol_to_value): New function.
464 (tic80_value_to_symbol): New function.
465 * tic80-dis.c (print_operand_control_register,
466 print_operand_condition_code, print_operand_bitnum):
467 Remove private tables and use tic80_value_to_symbol function.
470 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
472 * d10v-dis.c (print_operand): Change address printing
473 to correctly handle PC wrapping. Fixes PR11490.
475 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
477 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
480 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
482 * mips-dis.c (print_insn_mips16): Set insn_info information.
483 (print_mips16_insn_arg): Likewise.
485 * mips-dis.c (print_insn_mips16): Better handling of an extend
486 opcode followed by an instruction which can not be extended.
488 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
490 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
491 coldfire moveb instruction to not allow an address register as
492 destination. Although the documentation does not indicate that
493 this is invalid, experiments uncovered unexpected behavior.
494 Added a comment explaining the situation. Thanks to Andreas
495 Schwab for pointing this out to me.
498 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
500 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
501 entries are presorted so that entries with the same mnemonic are
502 adjacent to each other in the table. Sort the entries for each
503 instruction so that this is true.
506 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
508 * m68k-dis.c: Include <libiberty.h>.
509 (print_insn_m68k): Sort the opcode table on the most significant
510 nibble of the opcode.
513 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
515 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
516 "vsub", "vst", "xnor", and "xor" instructions.
517 (V_a1): Renamed from V_a, msb of accumulator reg number.
518 (V_a0): Add macro, lsb of accumulator reg number.
520 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
522 * tic80-dis.c (print_insn_tic80): Broke excessively long
523 function up into several smaller ones and arranged for
524 the instruction printing function to be callable recursively
525 to print vector instructions that have both a load and a
526 math instruction packed into a single opcode.
527 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
528 to explain why it comes after the other vector opcodes.
531 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
533 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
534 move insns to handle immediate operands.
536 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
538 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
539 fix operand mask in the "moveml" entries for the coldfire.
542 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
544 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
545 New macros for building vector instruction opcodes.
546 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
547 FMT_LI, which were unused. The field is now a flags field.
548 Remove some opcodes that are possible, but illegal, such
549 as long immediate instructions with doubles for immediate
550 values. Add "vadd" and "vld" instructions.
552 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
554 * tic80-opc.c (tic80_operands): Reorder some table entries to make
555 the order more logical. Move the shift alias instructions ("rotl",
556 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
557 interspersed with the regular sr.x and sl.x instructions. Add
558 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
559 "sub", "subu", "swcr", and "trap".
561 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
563 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
564 (OFF_SL_PC): Renamed from OFF_SL.
565 (OFF_SS_BR): New operand type for base relative operand.
566 (OFF_SL_BR): New operand type for base relative operand.
567 (REG_BASE): New operand type for base register operand.
568 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
569 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
570 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
572 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
573 10 char field, padded with spaces on rhs, rather than a string
574 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
575 than old TIC80_OPERAND_RELATIVE. Add support for new
576 TIC80_OPERAND_BASEREL flag bit.
578 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
580 * tic80-dis.c (print_insn_tic80): Print floating point operands
582 * tic80-opc.c (SPFI): Add single precision floating point
583 immediate operand type.
584 (ROTATE): Add rotate operand type for shifts.
585 (ENDMASK): Add for shifts.
586 (n): Macro for the 'n' bit.
587 (i): Macro for the 'i' bit.
588 (PD): Macro for the 'PD' field.
589 (P2): Macro for the 'P2' field.
590 (P1): Macro for the 'P1' field.
591 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
595 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
597 * mn10200-dis.c (disassemble): Mask off unwanted bits after
598 adding in current address for pc-relative operands.
601 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
603 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
604 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
605 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
606 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
607 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
608 REG_BASE_M_SI, REG_BASE_M_LI respectively.
609 (REG_SCALED, LSI_SCALED): New operand types.
610 (E): New macro for 'E' bit at bit 27.
611 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
612 opcodes, including the various size flavors (b,h,w,d) for
613 the direct load and store instructions.
615 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
617 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
619 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
620 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
621 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
622 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
623 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
624 masks with "MASK_* & ~M_*" to get the M bit reset.
625 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
627 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
629 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
630 correctly. Add support for printing TIC80_OPERAND_BITNUM and
631 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
633 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
634 CC, SICR, and LICR table entries.
635 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
636 "bcnd", and "brcr" opcodes.
639 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
641 * ppc-opc.c (powerpc_operands): Make comment match the
642 actual fields (no shift field).
643 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
645 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
646 partial implementation, work in progress.
647 * tic80-opc.c (tic80_operands): Begin construction operands table.
648 (tic80_opcodes): Continue populating opcodes table and start
649 filling in the operand indices.
650 (tic80_num_opcodes): Add this.
653 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
655 * m68k-opc.c: Add #B case for moveq.
657 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
659 * mn10300-dis.c (disassemble): Make sure all variables are initialized
660 before they are used.
663 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
665 * v850-opc.c (v850_opcodes): Put curly-braces around operands
666 for "breakpoint" instruction.
669 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
671 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
672 (dep): Use ALL_CFLAGS rather than CFLAGS.
675 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
677 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
681 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
683 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
685 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
688 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
690 * mips16-opc.c: Add "abs".
693 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
695 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
696 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
697 (disassembler): Add bfd_arch_tic80 support to set disassemble
699 * tic80-dis.c (print_insn_tic80): Add stub.
701 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
703 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
704 * configure: Regenerate with autoconf.
705 * tic80-dis.c: Add file.
706 * tic80-opc.c: Add file.
709 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
711 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
713 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
715 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
716 (mn10200_opcodes): Use it for some logicals and btst insns.
717 Add "break" and "trap" instructions.
719 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
721 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
723 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
725 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
726 relative load or add now depends upon whether the instruction is
729 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
731 * mn10200-dis.c: Finish writing disassembler.
732 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
733 Fix mask for "jmp (an)".
735 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
736 handle endianness issues for mn10300.
738 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
740 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
742 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
743 instruction. Fix opcode field for "movb (imm24),dn".
745 * mn10200-opc.c (mn10200_operands): Fix insertion position
748 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
750 * mn10200-opc.c: Create mn10200 opcode table.
751 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
752 but moving along nicely.
754 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
756 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
758 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
760 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
761 specifiers for fmovem* instructions.
763 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
765 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
767 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
769 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
772 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
774 * mn10300-opc.c: Add some comments explaining the various
777 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
779 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
781 * m68k-dis.c (print_insn_arg): Handle new < and > operand
784 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
785 operand specifiers in fmovm* instructions.
787 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
789 * ppc-opc.c (insert_li): Give an error if the offset has the two
790 least significant bits set.
792 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
794 * mips-dis.c (print_insn_mips16): Separate the instruction from
795 the arguments with a tab, not a space.
797 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
799 * mn10300-dis.c (disasemble): Finish conversion to '$' as
802 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
805 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
807 * configure: Rebuild with autoconf 2.12.
809 Add support for mips16 (16 bit MIPS implementation):
810 * mips16-opc.c: New file.
811 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
812 (mips16_reg_names): New static array.
813 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
814 after seeing a 16 bit symbol.
815 (print_insn_little_mips): Likewise.
816 (print_insn_mips16): New static function.
817 (print_mips16_insn_arg): New static function.
818 * mips-opc.c: Add jalx instruction.
819 * Makefile.in (mips16-opc.o): New target.
820 * configure.in: Use mips16-opc.o for bfd_mips_arch.
821 * configure: Rebuild.
823 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
825 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
826 operand specifiers in *save, *restore and movem* instructions.
828 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
831 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
832 register operands for immediate arithmetic, not, neg, negx, and
833 set according to condition instructions.
835 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
836 specifier of the effective-address operand in immediate forms of
837 arithmetic instructions. The specifier for the immediate operand
838 notes how and where the constant will be stored.
840 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
842 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
845 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
848 * mn10300-dis.c (disassemble): Prefix registers with '%'.
850 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
852 * mn10300-dis.c (disassemble): Handle register lists.
854 * mn10300-opc.c: Fix handling of register list operand for
855 "call", "ret", and "rets" instructions.
857 * mn10300-dis.c (disassemble): Print PC-relative and memory
858 addresses symbolically if possible.
859 * mn10300-opc.c: Distinguish between absolute memory addresses,
860 pc-relative offsets & random immediates.
862 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
864 (disassemble): Handle SPLIT and EXTENDED operands.
866 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
868 * mn10300-dis.c: Rough cut at printing some operands.
870 * mn10300-dis.c: Start working on disassembler support.
871 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
873 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
875 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
877 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
879 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
881 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
883 * mn10300-opc.c (mn10300_opcodes): Demand parens around
884 register argument is calls and jmp instructions.
886 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
888 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
889 getx operand. Fix opcode for mulqu imm,dn.
891 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
893 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
894 in MN10300_OPERAND_SPLIT operands for how many bits
895 appear in the basic insn word. Add IMM32_HIGH24,
896 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
897 (mn10300_opcodes): Use new operands as needed.
899 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
900 for bset, bclr, btst instructions.
901 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
903 * mn10300-opc.c (mn10300_operands): Remove many redundant
904 operands. Update opcode table as appropriate.
905 (IMM32): Add MN10300_OPERAND_SPLIT flag.
906 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
908 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
910 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
911 operands (for indexed load/stores). Fix bitpos for DI
912 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
913 few instructions that insert immediates/displacements in the
914 middle of the instruction. Add IMM8E for 8 bit immediate in
915 the extended part of an instruction.
916 (mn10300_operands): Use new opcodes as appropriate.
918 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
920 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
921 sequential so the assembler never parallelizes it with
924 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
926 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
927 a data/address register that appears in register field 0
928 and register field 1.
929 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
931 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
933 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
934 standard disassembly.
936 * alpha-opc.c (alpha_operands): Rearrange flags slot.
937 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
938 Recategorize PALcode instructions.
941 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
943 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
946 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
948 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
949 there are no operand types.
952 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
954 * v850-opc.c (D9_RELAX): Renamed from D9, all references
956 (v850_operands): Make sure D22 immediately follows D9_RELAX.
959 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
961 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
964 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
966 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
967 and sst.w instructions.
969 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
973 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
975 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
978 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
980 * ppc-opc.c (PPCPWR2): Define.
981 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
984 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
986 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
987 field for movhu instruction.
990 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
991 cast value to "long" not "signed long" to keep hpux10
995 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
997 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1000 * mn10300-opc.c (FMT*): Remove definitions.
1002 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1003 for shift-by-register opcodes.
1005 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1006 into [AD][MN][01] for encoding the position of the register
1009 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1011 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1012 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1014 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1016 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1017 Fix various typos. Add "PAREN" operand.
1018 (MEM, MEM2): Define.
1019 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1020 operands. Fix several typos.
1022 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1025 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1027 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1028 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1030 (mn10300_opcodes): Break opcode format out into its own field.
1031 Update many operand fields to deal with signed vs unsigned
1032 issues. Fix one or two typos in the "mov" instruction
1033 opcode, mask and/or operand fields.
1035 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1037 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1038 m68851 wasn't reset.
1040 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1042 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1043 all opcodes. Very rough cut at operands for all opcodes.
1045 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1048 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1050 * mn10200-opc.c, mn10300-opc.c: New files.
1051 * mn10200-dis.c, mn10300-dis.c: New files.
1052 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1053 * disassemble.c: Break mn10x00 support into 10200 and 10300
1055 * configure.in: Likewise.
1056 * configure: Rebuilt.
1058 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1060 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1062 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1064 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1066 * disassemble (ARCH_mn10x00): Define.
1067 (disassembler): Handle bfd_arch_mn10x00.
1068 * configure.in: Recognize bfd_mn10x00_arch.
1069 * configure: Rebuilt.
1071 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1073 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1074 accordingly. Don't declare functions using op_rtn.
1077 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1079 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1080 params to be more standard.
1081 * (disassemble): Print absolute addresses and symbolic names for
1082 branch and jump targets.
1083 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1085 * (v850_opcodes): Add breakpoint insn.
1088 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1090 * m68k-opc.c: Move the fmovemx data register cases before the
1091 other cases, so that they get recognized before the data register
1092 does gets treated as a degenerate register list.
1094 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1096 * mips-opc.c: Add a case for "div" and "divu" with two registers
1097 and a destination of $0.
1099 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1101 * mips-dis.c (print_insn_arg): Add prototype.
1102 (_print_insn_mips): Ditto.
1104 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1106 * mips-dis.c (print_insn_arg): Print condition code registers as
1109 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1111 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1114 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1116 * v850-dis.c (disassemble): Make static. Provide prototype.
1118 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1120 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1123 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1125 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1126 ']' characters into the output stream.
1127 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1128 Add "memop" field to all opcodes (for the disassembler).
1129 Reorder opcodes so that "nop" comes before "mov" and "jr"
1130 comes before "jarl".
1132 * v850-dis.c (print_insn_v850): Fix typo in last change.
1134 * v850-dis.c (print_insn_v850): Properly handle disassembling
1135 a two byte insn at the end of a memory region when the memory
1136 region's size is only two byte aligned.
1138 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1140 * v850-dis.c (v850_reg_names): Define.
1141 (v850_sreg_names, v850_cc_names): Likewise.
1142 (disassemble): Very rough cut at printing operands (unformatted).
1144 * v850-opc.c (BOP_MASK): Fix.
1145 (v850_opcodes): Fix mask for jarl and jr.
1147 * v850-dis.c: New file. Skeleton for disassembler support.
1148 * Makefile.in Remove v850 references, they're not needed here
1149 and they weren't being sanitized away.
1150 * configure.in: Add v850-dis.o when building v850 toolchains.
1151 * configure: Rebuilt.
1152 * disassemble.c (disassembler): Call v850 disassembler.
1154 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1155 (insert_d8_6, extract_d8_6): New functions.
1156 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1157 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1159 (IF4A, IF4B): Use "D7" instead of "D7S".
1160 (IF4C, IF4D): Use "D8_7" instead of "D8".
1161 (IF4E, IF4F): New. Use "D8_6".
1162 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1163 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1165 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1166 (v850_operands): Change D16 to D16_15, use special insert/extract
1167 routines. New new D16 that uses the generic insert/extract code.
1168 (IF7A, IF7B): Use D16_15.
1169 (IF7C, IF7D): New. Use D16.
1170 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1172 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1173 message. Issue an error if the branch offset is odd.
1175 * v850-opc.c: Add notes about needing special insert/extract
1176 for all the load/store insns, except "ld.b" and "st.b".
1178 * v850-opc.c (insert_d22, extract_d22): New functions.
1179 (v850_operands): Use insert_d22 and extract_d22 for
1181 (insert_d9): Fix range check.
1183 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1185 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1186 and set bits field to D9 and D22 operands.
1188 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1190 * v850-opc.c (v850_operands): Define SR2 operand.
1191 (v850_opcodes): "ldsr" uses R1,SR2.
1193 * v850-opc.c (v850_opcodes): Fix opcode specs for
1194 sld.w, sst.b, sst.h, sst.w, and nop.
1196 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1198 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1199 end of the opcode table.
1202 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1204 * d10v-opc.c (pre_defined_registers): Added register pairs,
1205 "r0-r1", "r2-r3", etc.
1208 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1210 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1211 Create I16U for an unsigned 16bit mmediate operand.
1212 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1214 * v850-opc.c (v850_operands): Define EP operand.
1215 (IF4A, IF4B, IF4C, IF4D): Use EP.
1217 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1218 with immediate operand, "movhi". Tweak "ldsr".
1220 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1221 correct. Get sld.[bhw] and sst.[bhw] closer.
1223 * v850-opc.c (v850_operands): "not" is a two byte insn
1225 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1227 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1229 * v850-opc.c (two): Get order of words correct.
1231 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1233 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1234 register source and destination operands.
1235 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1237 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1238 same thinko in "trap" opcode.
1240 * v850-opc.c (v850_opcodes): Add initializer for size field
1243 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1244 Add D8 for 8-bit unsigned field in short load/store insns.
1245 (IF4A, IF4D): These both need two registers.
1246 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1247 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1248 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1249 for "ldsr" and "stsr".
1250 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1253 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1254 short store word (sst.w).
1256 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1258 * v850-opc.c (v850_operands): Added insert and extract fields,
1259 pointers to functions that handle unusual operand encodings.
1261 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1263 * v850-opc.c (v850_opcodes): Enable "trap".
1265 * v850-opc.c (v850_opcodes): Fix order of displacement
1266 and register for "set1", "clr1", "not1", and "tst1".
1268 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1270 * v850-opc.c (v850_operands): Add "B3" support.
1271 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1274 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1276 * v850-opc.c: Close unterminated comment.
1278 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1280 * v850-opc.c (v850_operands): Add flags field.
1281 (v850_opcodes): add move opcodes.
1283 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1285 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1286 * configure: (bfd_v850v_arch) Add new case.
1287 * configure.in: (bfd_v850_arch) Add new case.
1288 * v850-opc.c: New file.
1291 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1293 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1295 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1297 * d10v-opc.c: Add additional information to the opcode
1298 table to help determinine which instructions can be done
1301 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1303 * mpw-make.sed: Update editing of include pathnames to be
1306 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1308 * arm-opc.h: Added "bx" instruction definition.
1310 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1312 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1314 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1316 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1318 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1320 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1322 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1324 * makefile.vms: Update for alpha-opc changes.
1326 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1328 * i386-dis.c (print_insn_i386): Actually return the correct value.
1329 (ONE, OP_ONE): #ifdef out; not used.
1331 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1333 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1334 Changed subi operand type to treat 0 as 16.
1336 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1338 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1341 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1343 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1344 memory transfer instructions. Add new format string entries %h and %s.
1345 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1348 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1350 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1351 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1353 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1355 * alpha-dis.c (print_insn_alpha_osf): Remove.
1356 (print_insn_alpha_vms): Remove.
1357 (print_insn_alpha): Make globally visible. Chose the register
1358 names based on info->flavour.
1359 * disassemble.c: Always return print_insn_alpha for the alpha.
1361 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1363 * d10v-dis.c (dis_long): Handle unknown opcodes.
1365 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1367 * d10v-opc.c: Changes to support signed and unsigned numbers.
1368 All instructions with the same name that have long and short forms
1369 now end in ".l" or ".s". Divs added.
1370 * d10v-dis.c: Changes to support signed and unsigned numbers.
1372 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1374 * d10v-dis.c: Change all functions to use info->print_address_func.
1376 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1378 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1379 move ccr/sr insns more strict so that the disassembler only
1380 selects them when the addressing mode is data register.
1382 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1383 * d10v-opc.c (pre_defined_registers): Declare.
1384 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1385 to pick a better name for the registers.
1387 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1389 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1390 operands for fexpand and fpmerge. From Christian Kuehnke
1391 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1393 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1395 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1396 print routine. Take new regnames and cpumask arguments.
1397 Kill the environment variable nonsense.
1398 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1399 (print_insn_alpha_vms): New function. Do VMS style regnames.
1400 * disassemble.c (disassembler): Test bfd flavour to pick
1401 between OSF and VMS routines. Default to OSF.
1403 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1405 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1406 * configure: Rebuild.
1407 * Makefile.in (install): Use @INSTALL_SHLIB@.
1409 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1411 * configure: (bfd_d10v_arch) Add new case.
1412 * configure.in: (bfd_d10v_arch) Add new case.
1413 * d10v-dis.c: New file.
1414 * d10v-opc.c: New file.
1415 * disassemble.c (disassembler) Add entry for d10v.
1417 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1419 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1420 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1422 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1424 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1425 distinguish between variants of the instruction set.
1426 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1427 distinguish between variants of the instruction set.
1429 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1431 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1432 the 8086 instruction set.
1433 * i386-dis.c: General cleanups. Make most things static. Add
1434 prototypes. Get rid of static variables aflags and dflags. Pass
1435 them as args (to almost everything).
1437 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1439 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1441 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1443 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1444 if the next arg is marked with SRC_IN_DST. Gross.
1446 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1447 we're looking for and find EXR.
1449 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1450 if we're looking for KBIT and we don't find it.
1452 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1455 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1456 3bit immediate operands.
1458 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1460 * Released binutils 2.7.
1462 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1463 <kkaempf@progis.ac-net.de>.
1465 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1467 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1469 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1471 * sparc-dis.c (print_insn_sparclite): New routine to print
1472 sparclite instructions.
1474 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1476 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1478 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1480 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1481 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1482 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1484 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1486 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1487 Use autoconf-set values.
1488 (docdir, oldincludedir): Removed.
1489 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1491 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1493 * alpha-opc.c: New file.
1494 * alpha-opc.h: Remove.
1495 * alpha-dis.c: Complete rewrite to use new opcode table.
1496 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1497 * configure: Rebuild with autoconf 2.10.
1498 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1499 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1501 (alpha-opc.o): New target.
1503 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1505 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1506 Set imm_added_to_rs1 even if the source and destination register
1509 * sparc-opc.c: Add some two operand forms of the wr instruction.
1511 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1513 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1516 * disassemble.c (disassembler): Handle H8/S.
1517 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1519 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1521 * sparc-opc.c: Add beq/teq as aliases for be/te.
1523 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1524 <sergei@msil.sps.mot.com>.
1526 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1528 * makefile.vms: New file.
1530 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1532 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1534 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1537 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1539 * i386-dis.c (OP_OFF): Call append_prefix.
1541 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1543 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1544 unsigned long to silence a warning from the Solaris PowerPC
1547 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1549 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1551 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1553 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1555 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1556 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1557 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1558 cpush, cpusha, cpull sparclet insns.
1560 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1562 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1564 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1566 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1567 Set F_FLOAT on other floating point instructions.
1569 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1571 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1573 (powerpc_opcodes): Add 860/821 specific SPRs.
1575 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1577 * configure.in: Permit --enable-shared to specify a list of
1578 directories. Set and substitute BFD_PICLIST.
1579 * configure: Rebuild.
1580 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1581 uses. Set to @BFD_PICLIST@.
1583 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1585 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1586 not "abs", which may be needed for the absolute in something
1587 like btst #0,@10:8. Print L_3 immediates separately from other
1588 immediates. Change ABSMOV reference to ABS8MEM.
1590 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1592 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1593 (current_arch_mask): New static global.
1594 (compute_arch_mask): New static function.
1595 (print_insn_sparc): Delete sparc_v9_p. New static local
1596 current_mach. Resort opcode table if current_mach changes.
1597 Generalize "insn not supported" test.
1598 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1599 Delete test for v9/!v9.
1600 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1602 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1603 (brfcx): Renamed to FBRX.
1604 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1605 coprocessor mnemonics are not supported on the sparclet).
1606 (condf): Renamed to CONDF.
1607 (SLCBCC2): Delete F_ALIAS flag.
1609 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1611 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1612 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1614 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1616 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1617 that the shared library version number is set correctly.
1619 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1621 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1622 Miles Bader <miles@gnu.ai.mit.edu>.
1623 * configure: Rebuild.
1625 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1627 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1630 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1632 * configure: Rebuild with autoconf 2.8.
1634 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1636 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1637 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1639 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1641 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1642 since they appear as targets in Makefile.in.
1643 * configure: Rebuild.
1645 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1647 * mpw-make.sed: Edit out shared library support bits.
1649 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1651 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1652 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1653 (sparc_opcodes): Add sparclet insns.
1654 (sparclet_cpreg_table): New static local.
1655 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1656 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1658 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1660 * i386-dis.c (index16): New static variable.
1661 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1663 (OP_indirE): Return result of OP_E.
1664 (OP_E): Check for 16 bit addressing mode, and disassemble
1665 correctly. Optimised 32 bit case a little. Don't print
1666 "(base,index,scale)" when sib specifies only an offset.
1668 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1670 * configure.in: Set and substitute SHLIB_DEP.
1671 * configure: Rebuild.
1672 * Makefile.in (SHLIB_DEP): New variable.
1673 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1674 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1675 COMMON_SHLIB, add them to piclist with appropriate modifications.
1676 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1677 here: just use piclist.
1679 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1681 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1682 (print_insn_sparc): Rewrite v9/not-v9 tests.
1683 (compare_opcodes): Likewise.
1684 * sparc-opc.c (MASK_<ARCH>): Define.
1685 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1686 (sparclet,v6notv9): Define.
1687 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1688 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1690 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1692 * configure.in: Call AC_PROG_CC before configure.host.
1693 * configure: Rebuild.
1695 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1697 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1699 * i386-dis.c (onebyte_has_modrm): New static array.
1700 (twobyte_has_modrm): New static array.
1701 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1703 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1705 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1708 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1710 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1713 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1715 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1716 m68010up, not just m68020up | cpu32.
1718 * Makefile.in (SONAME): New variable.
1719 ($(SHLINK)): Make a link to the transformed name, as well.
1720 (stamp-tshlink): New target.
1721 (install): Skip stamp-tshlink during install.
1723 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1725 * configure.in: Call AC_ARG_PROGRAM.
1726 * configure: Rebuild.
1727 * Makefile.in (program_transform_name): New variable.
1728 (install): Transform library name before installing it.
1730 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1732 * i960-dis.c (mem): Add HX dcinva instruction.
1734 Support for building as a shared library, based on patches from
1735 Alan Modra <alan@spri.levels.unisa.edu.au>:
1736 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1737 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1738 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1739 * configure: Rebuild.
1740 * Makefile.in (ALLLIBS): New variable.
1741 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1742 (COMMON_SHLIB, SHLINK): New variables.
1743 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1744 (STAGESTUFF): Remove variable.
1745 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1746 (stamp-piclist, piclist): New targets.
1747 ($(SHLIB), $(SHLINK)): New targets.
1748 ($(OFILES)): Depend upon stamp-picdir.
1749 (disassemble.o): Build twice if PICFLAG is set.
1750 (MOSTLYCLEAN): Add pic/*.o.
1751 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1752 (distclean): Remove pic and stamp-picdir.
1753 (install): Install shared libraries.
1754 (stamp-picdir): New target.
1756 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1758 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1759 Print unknown instruction as "unknown", rather than in hex.
1761 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1763 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1765 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1767 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1769 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1771 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1772 when necessary. From Ulrich Drepper
1773 <drepper@myware.rz.uni-karlsruhe.de>.
1775 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1777 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1778 sparc_num_opcodes. Update architecture enum values.
1779 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1780 (sparc_opcode_lookup_arch): New function.
1781 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1782 (sparc_opcodes): Add v9a shutdown insn.
1784 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1786 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1787 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1789 (print_insn_sparc64): Deleted.
1790 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1793 * sparc-opc.c (architecture_pname): Add v9a.
1795 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1797 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1798 incorrectly defined as 0x16 when it should be 0x15.
1799 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1800 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1801 excb (exception barrier) which is defined in the Alpha
1802 Architecture Handbook version 2.
1803 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1804 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1805 disassembled as or, for example.
1807 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1809 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1810 (_print_insn_mips): Change i from int to unsigned int.
1812 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1814 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1815 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1817 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1819 * i386-dis.c: Added Pentium Pro instructions.
1821 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1823 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1826 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1828 * sh-opc.h (sh_nibble_type): Added REG_B.
1829 (sh_arg_type): Added A_REG_B.
1830 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1832 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1834 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1836 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1838 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1840 * Makefile.in (distclean): Remove stamp-h. From Ronald
1841 F. Guilmette <rfg@monkeys.com>.
1843 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1845 From David Mosberger-Tang <davidm@azstarnet.com>:
1846 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1849 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1851 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1852 (sh_table): Added many SH3 opcodes.
1853 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1855 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1857 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1858 (subco,subco.): Mark this PPC, not PPCCOM.
1860 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1862 * configure: Rebuild with autoconf 2.7.
1864 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1866 * configure: Rebuild with autoconf 2.6.
1868 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1870 * configure.in: Sort list of architectures. Accept but do nothing
1871 for alliant, convex, pyramid, romp, and tahoe.
1873 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1875 * a29k-dis.c (print_special): Change num to unsigned int.
1877 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1879 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1882 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1884 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1885 * configure: Rebuilt.
1887 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1889 * configure.in: Add case for bfd_i860_arch.
1890 * configure: Rebuild.
1892 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1894 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1895 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1896 (NEXTDOUBLE): Likewise.
1897 (print_insn_m68k): Don't match fmoveml if there is more than one
1898 register in the list.
1899 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1901 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1903 * m68k-opc.c: Use #W rather than #w.
1904 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1906 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1908 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1909 and likewise for all the dbxx opcodes.
1911 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1913 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1915 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1917 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1918 the VR4100 specific instructions to the mips_opcodes structure.
1920 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1922 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1923 ugly Metrowerks bug in CW6, is fixed in CW7.
1925 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1927 * ppc-opc.c (whole file): Add flags for common/any support.
1929 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1931 * Makefile.in (BISON): Remove macro.
1932 (FLAGS_TO_PASS): Remove BISON.
1934 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1936 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1938 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1939 instructions that take no args by looking at the match mask.
1940 (print_insn_arg): Always print "%" before register names.
1941 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1942 [case '_']: Don't print "@#" before address.
1943 [case 'J']: Use "%s" as format string, not register name.
1944 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1946 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1948 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1951 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1953 From David Mosberger-Tang <davidm@azstarnet.com>
1955 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1956 (alpha_insn_set): added definitions for VAX floating point
1957 instructions (Unix compilers don't generate these, but handcoded
1958 assembly might still use them).
1960 * alpha-dis.c (print_insn_alpha): added support for disassembling
1961 the miscellaneous instructions in the Alpha instruction set.
1963 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1965 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1966 no longer create sysdep.h, sed ppc-opc.c to work around a
1967 serious Metrowerks C bug.
1968 * mpw-make.in: Remove.
1969 * mpw-make.sed: New file, used by mpw-configure to edit
1970 Makefile.in into an MPW makefile.
1972 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1974 * Makefile.in (maintainer-clean): New synonym for realclean.
1976 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1978 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1979 which use '0', '1', and '2' instead. Specify the proper size for
1980 a pmove immediate operand. Correct the pmovefd patterns to be
1981 moves to a register, not from a register.
1982 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1984 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1986 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1987 %psr, %wim, %tbr as F_NOTV9.
1989 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1991 * Makefile.in (Makefile): Just rebuild Makefile when running
1993 (config.h, stamp-h): New targets.
1994 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1995 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1996 rebuilding config.h.
1997 * configure: Rebuild.
1999 * mips-opc.c: Change unaligned loads and stores with "t,A"
2000 operands to use "t,A(b)".
2002 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2004 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2006 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2008 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2009 until 3 instead of until 2.
2011 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2013 * Makefile.in (ALL_CFLAGS): Define.
2014 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2015 (MOSTLYCLEAN): Add config.log.
2016 (distclean): Don't remove config.log.
2017 * configure.in: Substitute HDEFINES.
2018 * configure: Rebuild.
2020 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2022 * sh-opc.h (sh_arg_type): Add F_FR0.
2023 (sh_table, case fmac): Add F_FR0 as first argument.
2025 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2027 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2029 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2031 * sparc-dis.c: Remove all references to NO_V9.
2033 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2035 * aclocal.m4: Just include ../bfd/aclocal.m4.
2036 * configure: Rebuild.
2038 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2040 * sparc-dis.c (X_DISP19): Define.
2041 (print_insn, case 'G'): Use it.
2042 (print_insn, case 'L'): Sign extend displacement.
2044 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2046 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2047 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2048 host_makefile_frag or frags.
2049 * aclocal.m4: New file.
2050 * configure: Rebuild.
2051 * Makefile.in (INSTALL): Set to @INSTALL@.
2052 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2053 (INSTALL_DATA): Set to @INSTALL_DATA@.
2055 (AR_FLAGS): Set to rc rather than qc.
2056 (CC): Define as @CC@.
2057 (CFLAGS): Set to @CFLAGS@.
2058 (@host_makefile_frag@): Remove.
2059 (config.status): Remove dependency upon @frags@.
2061 * configure.in: ../bfd/config.bfd now just sets shell variables.
2062 Use them rather than looking through target Makefile fragments.
2063 * configure: Rebuild.
2065 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2067 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2069 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2071 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2072 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2075 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2076 (lookup_{name,value}): New functions.
2077 (prefetch_table): New static local.
2078 (sparc_{encode,decode}_prefetch): New functions.
2079 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2081 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2083 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2086 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2088 * sh-dis.c: Correct comment on first line of file.
2090 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2092 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2094 * sparc-opc.c (asi, membar): New static locals.
2095 (sparc_{encode,decode}_{asi,membar}): New functions.
2096 (sparc_opcodes, membar insn): Fix.
2097 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2098 Support decoding of membar masks.
2101 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2103 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2105 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2107 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2108 and likewise for the other branches. Add bhs as an alias for bcc,
2109 and likewise for the size variants. Add dbhs as an alias for
2112 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2114 * sh-opc.h (FP sts instructions): Update to match reality.
2116 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2118 * m68k-dis.c: (fpcr_names): Add % before all register names.
2119 (reg_names): Likewise.
2120 (print_insn_arg): Don't explicitly print % before register names.
2121 Add % before register names in static array names. In case 'r',
2122 print data registers as `@(Dn)', not `Dn@'. When printing a
2123 memory address, don't print @# before it.
2124 (print_indexed): Change base_disp and outer_disp from int to
2125 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2126 syntax. Sign extend 8 byte displacement correctly.
2127 (print_base): Print using MIT syntax. Print zpc when appropriate.
2128 Change parameter disp from int to bfd_vma.
2130 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2133 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2135 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2136 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2137 * sh-opc.h (sh_arg_type): Add new operand types.
2138 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2140 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2142 * Makefile.in (distclean): Remove generated file config.h.
2144 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2146 * Makefile.in (distclean): Remove generated file config.h.
2148 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2150 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2152 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2154 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2155 rather than numopcodes. Use m68k_opcodes rather than removed
2156 opcode function. Don't check F_ALIAS.
2157 (print_insn_arg): Change first parameter to be const char *.
2158 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2159 (m68k-opc.o): New target.
2160 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2161 * configure: Rebuild.
2163 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2165 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2166 (opcode_bits, opcode_hash_table): New variables.
2167 (opcodes_initialized): Renamed from opcodes_sorted.
2168 (build_hash_table): New function.
2169 (is_delayed_branch): Use hash table.
2170 (print_insn): Renamed from print_insn_sparc, made static.
2171 Build and use hash table. If !sparc64, ignore sparc64 insns,
2172 and vice-versa if sparc64.
2173 (print_insn_sparc, print_insn_sparc64): New functions.
2174 (compare_opcodes): Move sparc64 opcodes to end.
2175 Print commutative insns with constant second.
2176 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2178 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2180 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2181 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2182 avoids printing a delay slot in a delay slot.
2183 * sh-opc.h (sh_table): Fully bracket last entry.
2185 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2187 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2189 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2191 * configure.in: Get host_makefile_frag from ${srcdir}.
2193 * configure.in: Autoconfiscated. Check for string[s].h. Create
2194 config.h from config.in. Don't set up sysdep.h link.
2195 * sysdep.h: New file.
2196 * configure, config.in: New files, generated from configure.in.
2197 * Makefile.in: Updated to be processed autoconf-style.
2198 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2199 (Makefile): Depend on config.status.
2200 (config.status): New rule.
2201 * configure.bat: Update Makefile substitutions.
2203 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2205 * mips-opc.c (L1): Define.
2206 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2207 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2210 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2212 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2213 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2214 have multiple add units but only a single logical unit.
2216 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2217 shifted by 18, without any insertion or extraction function.
2218 (insert_cr, extract_cr): Remove.
2221 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
2223 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
2226 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2228 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2231 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2233 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2234 * sh-opc.h: Add copyright.
2236 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2238 * Makefile.in (crunch-m68k): Delete extra target accidentally
2239 checked in a while ago.
2241 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2243 * sh-opc.h (sh_table): Add SH3 support.
2245 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2247 * sh-opc.h: Added bsrf and braf.
2249 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2251 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2252 bogus [ls]fm{ea,fd} patterns.
2254 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2255 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2256 initialize it from memory. Make function static.
2257 (print_insn_{big,little}_arm): New functions.
2258 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2259 the correct endianness.
2262 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
2264 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
2265 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
2268 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2270 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2273 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2275 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2276 17th, so that it builds again using GCC as the compiler.
2278 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2280 * mips-dis.c (print_insn_little_mips): Cast return value from
2281 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2282 expects an unsigned long, and that might be fewer words of
2283 argument storage (e.g., if bfd_vma is long long on a 32-bit
2285 (print_insn_big_mips): Likewise with bfd_getb32 value.
2286 (_print_insn_mips): Now static.
2288 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2290 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2291 gcc memory hog problem with initializer is fixed.
2294 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
2296 * arc-opc.c (NULL): Define.
2297 (arc_operands, insn fields u,s): Delete.
2298 (arc_operands, insn fields a,b,c): Mark as signed.
2299 (arc_opcodes): No longer const, links computed at run-time.
2300 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
2301 suffixes that affect the insn code.
2302 (arc_opcodes): Resort table to macros are first.
2303 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
2304 (arc_opcodes, st [b] entry): Likewise.
2305 (arc_opcodes, st [b,d] entry): Fix mask, value.
2306 (arc_reg_names): Add entries for r29, r30, r31, r60.
2307 (opcode_map, icode_map): New static globals.
2308 (arc_opcode_init_tables): Initialize them.
2309 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
2310 (insert_shimmoffset): Signal error if register present.
2312 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
2315 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2317 Merge in support for Mac MPW as a host.
2318 (Old change descriptions retained for informational value.)
2320 * mpw-config.in (archname): Compute from the config.
2321 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2323 * mpw-config.in (target_arch): Compute from canonical target.
2324 (m68k, mips, powerpc, sparc): Add architectures.
2325 * mpw-make.in (disassemble.c.o): Add.
2326 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2328 * mpw-config.in (BFD_MACHINES): Set to a default value.
2329 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2331 * mpw-make.in (CSEARCH): Add extra-include to search path.
2333 * mpw-config.in (varargs.h): Don't create.
2334 (sysdep.h): Create using forward-include.
2335 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2337 * mpw-config.in: New file, MPW version of configure.in.
2338 * mpw-make.in: New file, MPW version of Makefile.in.
2341 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
2343 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
2344 Call arc_get_opcode_mach to map bfd mach number to opcode value.
2345 (print_insn_*): Pass bfd mach number, not opcode version.
2346 * arc-opc.c (arc_get_opcode_mach): New function.
2349 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2351 * alpha-dis.c (print_insn_alpha): Put empty statement after
2354 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2356 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2357 (low_sign_extend): Likewise.
2358 (get_field): Delete unused function.
2359 (set_field, deposit_14, deposit_21): Likewise.
2361 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2363 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2366 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2368 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2370 * alpha-opc.h (OSF_ASMCODE): define
2371 print pal-code names as defined in App C of the
2372 Alpha Architecture Reference Manual
2374 * alpha-dis.c: cleaned up output
2375 print stylized code forms as defined in App A.4.3 of the
2376 Alpha Architecture Reference Manual
2378 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2380 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2382 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2385 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2387 * m68k-dis.c (opcode): New function. Returns address of opcode
2388 table entry given index, even if the opcode table was split to
2389 work around gcc bugs.
2390 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2392 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2393 (reg_names): Now const.
2394 (print_insn_arg): Arrays cacheFieldName and names now const.
2395 (print_indexed): Array scales now const.
2398 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
2400 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
2401 (print_insn_arc_{host,graphics,audio}): Likewise.
2402 (print_insn): Add prototype.
2403 (arc_get_disassembler): New arg `big_p'. Return little or big
2404 print fn accordingly.
2405 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
2406 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
2407 (arc_opval_supported): Likewise.
2408 * disassemble.c (disassembler): Pass big endian flag to
2409 arc_get_disassembler.
2412 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2414 * ppc-opc.c: Sort recently added instructions by minor opcode
2415 number within major opcode number.
2417 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2419 * hppa-dis.c: Include libhppa.h.
2421 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2423 * mips-opc.c: Change dli to use M_DLI, and add dla.
2425 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2427 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2430 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
2432 * arc-dis.c (arc_get_disassembler): Change argument to int,
2433 one of bfd_mach_arc_xxx. All callers updated.
2436 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2438 * mips-opc.c: Add r4650 mul instruction.
2440 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2442 * mips-opc.c: Add uld and usd macros for unaligned double load and
2445 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2447 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2448 mfdcr, mtdcr, icbt, iccci.
2451 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
2453 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
2454 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
2455 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
2456 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
2457 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
2458 (insert_absaddr): New function.
2460 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2462 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2463 New argument `cpu', pass it to arc_opcode_init_tables.
2464 Document byte order dependencies. Ignore unsupported insns.
2465 (arc_get_disassembler): New function.
2466 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2467 print_insn_arc_audio): New functions.
2468 * arc-opc.c (MULTSHIFT operand): Delete.
2469 (UNSIGNED, SATURATION): New operands.
2470 (mac, mul, mul64, mulu64): New insns.
2471 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2472 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2473 (host,graphics,audio extended and auxiliary regs): Define.
2474 (ss, sc, mh, ml): New suffixes.
2475 (arc_opcode_supported, arc_opval_supported): New functions.
2476 (insert_multshift, extract_multshift): Deleted.
2477 * disassemble.c (disassembler, case bfd_arch_arc): Call
2478 arc_get_disassembler to get disassembler routine.
2481 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2483 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2484 signed char fields to shorts, more portable.
2486 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2488 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2489 char fields as signed chars, since they may have negative values.
2491 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2493 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2494 (mycroft@netbsd.org).
2496 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2498 From "Logg, Ed" <elogg@ea.com>:
2499 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2500 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2503 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2505 * ppc-opc.c: Changes based on patch from David Edelsohn
2506 <edelsohn@mhpcc.edu>.
2507 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2510 (insert_tbr): New static function.
2511 (extract_tbr): New static function.
2512 (XFXFXM_MASK, XFXM): Define.
2513 (XSPRBAT_MASK, XSPRG_MASK): Define.
2514 (powerpc_opcodes): Add instructions to access special registers by
2515 name. Add mtcr and mftbu.
2517 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2519 * mips-opc.c (P3): Define.
2520 (mips_opcodes): Add mad and madu.
2522 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2524 * configure.in: Add W65 support.
2525 * disassemble.c: Likewise.
2526 * w65-opc.h, w65-dis.c: New files.
2528 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2530 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2534 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2536 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2538 * arc-opc.c (extract_reladdr): New function.
2539 (insert_reladdr): Store address right-shifted by 2.
2542 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2544 * mips-opc.c: Add dli as a synonym for li.
2547 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2549 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2551 (extraction fns): Insn argument now array of two words. Return pointer
2552 to value's table entry. All uses changed.
2553 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2554 (insert_multshift, extract_multshift): New fns.
2555 (arc_operands): Add support for cache bypass suffix. Add support for
2556 predefined aux regs. Modifier bits moved to flags field.
2557 (arc_opcodes): Likewise.
2558 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2559 New insn rlc. Update to syntax in programmer's manual.
2560 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2561 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2563 (arc_opcode_init_tables): New argument to indicate cpu type.
2564 (insert_reg): Handle predefined aux regs.
2565 (extract_reg): Likewise.
2566 (lookup_register): New fn.
2567 * arc-dis.c (arc_condition_codes): Deleted.
2568 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2569 Clean up modifier handling. Handle predefined aux regs.
2572 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2574 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2575 print something for reserved opcode values, even if it won't
2578 * mips-dis.c (_print_insn_mips): When initializing, shift right
2579 and mask, to avoid sign extension problems on the Alpha.
2581 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2585 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2587 * configure.in: Add ARC support.
2588 * disassemble.c: Likewise.
2589 * arc-dis.c, arc-opc.c: New files.
2592 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2594 * sh-opc.h (mov.l gbr): Get direction right.
2595 * sh-dis.c (print_insn_shx): New function.
2596 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2597 print opcodes with right byte order.
2599 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2601 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2602 to avoid conflicts with getopt.
2604 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2606 * hppa-dis.c (print_insn_hppa): Read the instruction using
2607 bfd_getb32, so that it works on a little endian or 64 bit host.
2608 Remove unused local variable op.
2610 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2612 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2613 addu does not work correctly if -mips3.
2615 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2617 * a29k-dis.c (print_special): Add special register names defined
2618 on 29030, 29040 and 29050.
2619 (print_insn): Handle new operand type 'I'.
2621 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2623 * Makefile.in (INSTALL): Use top level install.sh script.
2625 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2627 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2628 that it works on a little endian host.
2630 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2632 * configure.in: Use ${config_shell} when running config.bfd.
2634 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2636 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2638 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2640 * a29k-dis.c (print_insn): Print the opcode.
2642 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2644 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2646 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2648 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2650 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2652 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2653 which store a value into memory.
2655 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2657 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2658 * arm-dis.c, arm-opc.h: New files.
2660 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2662 * Makefile.in (ns32k-dis.o): Add dependency.
2663 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2664 string, not as array of chars.
2666 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2668 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2670 * sparc-opc.c: Added sparclite extended FP operations, and
2671 versions of v9 impdep* instructions permitting specification of
2674 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2676 * i960-dis.c (reg_names): Now const.
2677 (struct sparse_tabent): New type, copied from array type in mem
2679 (ctrl): Local static array ctrl_tab now const.
2680 (cobr): Local static array cobr_tab now const.
2681 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2682 static variable mem_tab no longer explicitly initialized. Changed
2683 mem_init to const array of struct sparse_tabent.
2684 (reg): Local static variable reg_tab no longer explicitly
2685 initialized. Changed reg_init to const array of struct
2687 (ea): Local static array scale_tab now const.
2689 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2692 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2694 * configure.bat: the disassember needs to be enabled for
2695 "objdump -d" to work in djgpp.
2697 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2699 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2700 (invalid_float): Enabled general version, doesn't require running
2701 on ns32k host. Changed to take char* argument, and test for
2702 explicitly specified sizes, instead of using sizeof() on host CPU
2704 (INVALID_FLOAT): Cast first argument.
2705 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2706 list_P032, list_M032): Now const.
2707 (optlist, list_search): Made appropriate arguments now point to
2709 (print_insn_arg): Changed static array of one-character-string
2710 pointers into a static const array of characters; fixed sprintf
2711 statement accordingly.
2713 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2715 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2716 from distribution. A ns32k-dis.c from a previous distribution has
2717 been brought up to date and supports the new interface.
2719 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2721 * configure.in: add bfd_ns32k_arch target support.
2723 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2724 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2726 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2728 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2731 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2733 * h8300-dis.c, mips-dis.c: Don't use true and false.
2735 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2737 * configure.in: Change --with-targets to --enable-targets.
2739 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2741 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2742 opcodes to the first instruction with that opcode, to speed
2743 disassembly of large files. From ralphc@pyramid.com (Ralph
2746 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2748 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2750 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2752 * configure.bat: update to latest makefile.in
2754 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2756 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2757 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2758 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2759 slot insn is in a delay slot.
2760 * z8k-opc.h: (resflg): Fix patterns.
2761 * h8500-opc.h Fix CR insn patterns.
2763 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2765 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2766 "cmpl" before POWER versions, so that gas -many uses them.
2768 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2770 * disassemble.c: New file.
2771 * Makefile.in (OFILES): Add disassemble.o.
2772 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2773 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2774 binutils/configure.in.
2776 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2777 opcode being examined.
2779 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2781 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2782 (insert_ral, insert_ram, insert_ras): New functions.
2783 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2784 RAS for store with update.
2786 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2788 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2789 (edelsohn@npac.syr.edu).
2791 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2793 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2796 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2798 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2800 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2802 * ppc-opc.c (powerpc_operands): The signedp field has been
2803 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2804 instead. Add new operand SISIGNOPT.
2805 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2806 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2807 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2810 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2812 * i386-dis.c (struct private): Renamed to dis_private. `private'
2813 is a reserved word for dynix cc.
2815 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2817 * configure.in: Change error message to refer to bfd/config.bfd
2818 rather than bfd/configure.in.
2820 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2822 * ppc-opc.c: Define POWER2 as short alias flag.
2823 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2826 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2828 * i960-dis.c (print_insn_i960): Don't read a second word for
2829 opcodes 0, 1, 2 and 3.
2831 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2833 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2835 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2837 * m68881-ext.c: Removed; no longer used.
2838 * Makefile.in: Changed accordingly.
2840 * m68k-dis.c (ext_format_68881): Don't declare.
2841 (print_insn_m68k): If an instruction uses place 'i', it uses at
2842 least four fixed bytes.
2843 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2844 extended float, convert to double using floatformat_to_double, not
2845 ieee_extended_to_double, and fetch the data before converting it.
2847 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2849 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2850 davidj@ICSI.Berkeley.EDU (David Johnson).
2852 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2854 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2855 PowerPC uses bdnz[l][a].
2857 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2859 * dis-buf.c, i386-dis.c: Include sysdep.h.
2861 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2863 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2865 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2866 by Motorola PowerPC 601 with PPC_OPCODE_601.
2867 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2868 Disassemble Motorola PowerPC 601 instructions as well as normal
2869 PowerPC instructions.
2871 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2873 * i960-dis.c (reg, mem): Just use a static array instead of
2876 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2878 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2879 condition name index if this is for a negated condition.
2881 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2882 Floating point format for 'H' operand is backwards from normal
2883 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2884 operands (fmpyadd and fmpysub), handle bizarre register
2885 translation correctly for single precision format.
2887 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2888 or 'I' operands if the next format specifier is 'M' (fcmp
2889 condition completer).
2891 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2893 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2894 single number giving a bitmask for the MB and ME fields of an M
2895 form instruction. Change NB to accept 32, and turn it into 0;
2896 also turn 0 into 32 when disassembling. Seperated SH from NB.
2897 (insert_mbe, extract_mbe): New functions.
2898 (insert_nb, extract_nb): New functions.
2899 (SC_MASK): Mask out SA and LK bits.
2900 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2901 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2902 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2903 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2904 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2905 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2906 (powerpc_macros): Define table of macro definitions.
2907 (powerpc_num_macros): Define.
2909 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2910 if PPC_OPERAND_NEXT is set.
2912 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2914 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2915 char. Retrieve contents using bfd_getl32 instead of shifting.
2917 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2919 * ppc-opc.c: New file. Opcode table for PowerPC, including
2920 opcodes for POWER (RS/6000).
2921 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2922 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2923 (CFILES): Add ppc-dis.c.
2924 (ppc-dis.o, ppc-opc.o): New targets.
2925 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2927 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2929 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2930 No space before 'u', 'f', or 'N'.
2932 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2934 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2935 farther than we should.
2937 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2939 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2941 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2943 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2945 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2946 needs it, to prevent reading past the end of a section.
2948 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2950 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2951 Removed t,A case for la; always use t,A(b) case.
2953 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2955 From Ted Lemen <mellon@pepper.ncd.com>
2956 * mips-dis.c (print_insn_arg): Handle 'k'.
2957 * mips-opc.c: Make cache use k, not t.
2959 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2961 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2962 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2963 FLOAT_FORMAT_CODE to put out floating point register names.
2965 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2967 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2969 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2971 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2973 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2975 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2976 larger than 32. Moved dsxx32 variants first for disassembler.
2978 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2980 * z8kgen.c, z8k-opc.h: Add full lda information.
2982 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2984 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2985 movb instructions. Any necessary space will be emitted by
2986 the code to handle nullification completers.
2988 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2990 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2992 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2994 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2995 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2997 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2999 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3001 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3003 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3004 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3006 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3008 * m88k-dis.c (m88kdis): comment change. Remove space after
3010 (printop): handle new arg types DEC and XREG for m88110.
3012 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3014 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3015 type for absolute branch addresses. Delete special
3016 "ble" and "be" code in 'W' operand code.
3018 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3020 * mips-opc.c: Set hazard information correctly for branch
3021 likely instructions.
3023 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3025 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3026 info->fprintf_func for printing and info->print_address_func for
3029 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3031 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3033 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3035 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3036 Corrected second case of "b" for disassembler.
3038 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3040 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3041 to BFD swapping routines to correspond to BFD name changes.
3043 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3045 * mips-opc.c: Change div machine instruction to be z,s,t rather
3046 than s,t. Change div macro to be d,v,t rather than d,s,t.
3047 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3048 rem and remu which generates only the corresponding div
3049 instruction. This is for compatibility with the MIPS assembler,
3050 which only generates the simple machine instruction when an
3051 explicit destination of $0 is used.
3052 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3054 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3056 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3057 WR_31 hazard for bal, bgezal, bltzal.
3059 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3061 * hppa-dis.c (print_insn_hppa): Use print function
3062 from within the disassemble_info, not fprintf_filtered.
3064 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3066 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3067 Law, law@cs.utah.edu.)
3069 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3071 * mips-opc.c ("absu"): Removed.
3074 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3076 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3077 Changed hazard information to distinguish between memory load
3078 delays and coprocessor load delays.
3080 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3082 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3084 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3086 * configure.in: Don't pass cpu to config.bfd.
3088 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * m88k-dis.c (m88kdis): Make class unsigned.
3092 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3094 * alpha-dis.c (print_insn_alpha): One branch format case was
3095 missing the instruction name.
3097 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3099 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3100 Add the arch-specific auxiliary files.
3101 (OFILES): Remove the arch-specific auxiliary files
3102 and use BFD_MACHINES instead of DIS_LIBS.
3103 * configure.in: Set BFD_MACHINES based on --with-targets option.
3105 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3107 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3110 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3112 * sparc-opc.c: Change CONST to const to deal with gcc
3113 -Dconst=__const -traditional.
3115 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3117 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3118 coprocessor instructions out of #if 0, and made them use new
3121 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3123 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3125 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3127 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3128 instruction, for use by the disassembler.
3130 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3131 hand-coded sign extensions that depended on 32-bit host ints.
3132 FIXME, we still depend on big-endian host bitfield ordering.
3133 (sparc_print_insn): Set the insn_info_valid field, and the
3134 other fields that describe the instruction being printed.
3136 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3138 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3139 `jmp' instead of just one of them.
3141 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3143 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3144 (fput_fp_reg_r): Renamed from fput_reg_r.
3145 (fput_fp_reg): New function.
3146 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3148 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3150 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3152 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3154 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3156 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3157 don't output a space.
3159 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3161 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3163 * mips-opc.c: New file, containing opcode table from
3164 ../include/opcode/mips.h.
3165 * Makefile.in: Add it.
3167 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3169 * m88k-dis.c: New file, moved in from gdb and changed to use the
3170 new dis-asm.h disassembler interface.
3171 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3172 (m88k-dis.o): New target.
3174 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3176 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3177 argument string const char * to correspond to opcode/mips.h.
3179 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3181 * mips-dis.c: Updated to account for name changes in new version
3183 * Makefile.in: Added header file dependencies.
3185 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3187 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3189 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3191 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3192 extend, rather than shifts.
3194 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3196 * Makefile.in: Undo 15 June change.
3198 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3200 * m68k-dis.c (print_insn_arg): Change return value to byte count
3202 * m68k-dis.c: Re-write to detect invalid operands before
3203 printing anything, so we can handle this the same way we
3204 handle invalid opcodes.
3206 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3208 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3210 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3212 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3215 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3217 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3219 * configure.in: Do make sysdep.h link.
3220 * Makefile.in: Search ../include. Don't search ../bfd.
3222 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3224 Changes from Jeff Law, law@cs.utah.edu:
3225 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3226 Do not print a space before the completers specified by
3229 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3231 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3232 defined, since gdb has been fixed.
3234 Changes from Jeff Law, law@cs.utah.edu:
3235 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3236 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3237 be a *disassemble_info, not a *FILE.
3238 * hppa-dis.c: Support 'd', '!', and 'a'.
3239 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3240 * hppa-dis.c: Delete cases which are no longer needed.
3242 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3244 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3246 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3248 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3251 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3253 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3254 * configure.in: No longer need to configure to get sysdep.h.
3256 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3258 * Patches from Jeffrey Law <law@cs.utah.edu>.
3259 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3260 templates for 1.1 FP computational instructions.
3262 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3264 * h8500-dis.c (print_insn_h8500): Address argument is type
3266 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3269 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3270 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3272 * sparc-dis.c (compare_opcodes): Move static declaration to
3275 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3277 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3278 instruction, remove unimp hack from 'l' argument.
3280 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3282 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3285 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3287 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3288 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3291 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3293 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3294 arrays of string pointers to 2-d arrays of chars, to save
3297 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3299 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3300 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3302 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3304 * hppa-dis.c: New file from Utah, adapted to new disassembler
3306 * Makefile.in: Include it.
3308 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3310 * sh-dis.c, sh-opc.h: New files.
3312 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3314 * alpha-dis.c, alpha-opc.h: New files.
3316 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3318 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3321 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3323 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3325 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3327 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3330 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3332 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3333 and double percent signs a few places.
3335 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3337 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3338 Use info->print_address_func not print_address.
3340 * dis-buf.c (generic_print_address): New function.
3342 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3344 * Makefile.in: Add sparc-dis.c.
3345 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3347 Add `add' instruction to the set that get checked
3348 for a preceding `sethi' in order to print an absolute address.
3349 * (print_insn): Disassembly prefers real instructions.
3350 (is_delayed_branch): Speed up.
3351 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3352 Still missing some float ops, and needs testing.
3353 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3354 F_ALIAS. Use printf, not fprintf, when not passing a file
3356 (compare_opcodes): Check that identical instructions have
3357 identical opcodes, complain otherwise.
3360 * Include reg_names.
3362 Use dis-asm.h/read_memory_func interface.
3364 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3366 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3367 deliberately return non-zero to setjmp from longjmp. Otherwise
3368 this code fails to compile.
3370 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3372 * m68k-dis.c: Fix prototype for fetch_arg().
3374 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3376 * dis-buf.c: New file, for new read_memory_func interface.
3377 Makefile.in (OFILES): Include it.
3378 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3379 Use new read_memory_func interface.
3381 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3383 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3384 * h8500-opc.h: Fix couple of opcodes.
3386 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3388 * Makefile.in: add dvi & installcheck targets
3390 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3392 * Makefile.in: Update for h8500-dis.c.
3394 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3396 * h8500-dis.c, h8500-opc.h: New files
3398 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3400 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3401 ../include/dis-asm.h.
3402 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3403 and ../gdb/m68k-pinsn.c).
3404 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3405 and ../gdb/i386-pinsn.c).
3406 * m68881-ext.c: New file. Moved definition of
3407 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3408 * Makefile.in: Adjust for new files.
3409 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3410 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3411 can be dis-assembled.
3413 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3415 * mips-dis.c (print_insn_arg): Now returns void.
3417 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3419 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3420 files that use the macros.
3422 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3424 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3425 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3426 (CFILES): Added mips-dis.c.
3428 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3430 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3431 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3433 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3435 * Makefile.in: Improve *clean rules.
3436 * configure.in: Allow a default host.
3438 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3440 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3441 files include other sysdep files
3443 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3445 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3447 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3449 * configure.in: For host support, use ../bfd/configure.host
3450 so it stays in sync with the ../bfd/hosts database.
3452 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3454 * configure.in: use cpu-vendor-os triple instead of nested cases
3456 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3458 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3459 *always* the wrong one.
3461 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3463 * z8kgen.c: added copyright info
3465 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3467 * z8k-dis.c (unparse_instr): prettier tabs
3468 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3470 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3472 * configure.in: Add ncr* configuration.
3473 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3474 picayune ANSI compilers happy.
3476 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3478 * configure.in (i386): Make i386 and i486 synonymous for now.
3479 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3481 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3483 * Makefile.in (install): Fix typo.
3485 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3487 * Makefile.in (make): Remove obsolete crud.
3488 (sparc-opc.o): Avoid Sun Make VPATH bug.
3490 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3492 * Makefile.in: since there are no SUBDIRS, remove rule and
3493 references of subdir_do.
3495 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3497 * Makefile.in (install): Get the library name right here too.
3498 Don't install bfd.h, since it's unrelated to this library. No
3499 subdirs to recurse into, either.
3500 (CFILES): The source file has a .c suffix, not .o.
3502 * sparc-opc.c: New file, moved from BFD.
3503 * Makefile.in (OFILES): Build it.
3505 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3507 * z8k-dis.c: fixed forward refferences of some declarations.
3509 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3511 * Makefile.in: get the name of the library right
3513 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3515 * z8k-dis.c: knows how to disassemble z8k stuff
3516 * z8k-opc.h: new file full of z8000 opcodes
3520 version-control: never