1 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
3 * mips-opc.c: Add FP_D to s.d instruction flags.
5 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
7 * m68k-opc.c (halt, pulse): Enable them on the 68060.
10 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
12 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
13 PC relative offset forms before the 15 bit forms. An assembler command
14 line option now chooses the default.
18 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
20 * mips-opc.c: Add many missing r5900 instructions.
24 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
26 * d30v-opc.c (d30v_opcode_table): Set new flags bits
27 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
30 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
32 * configure: Only build libopcodes shared if --enable-shared's value
33 was `yes', or was set to `*opcodes*'.
34 * aclocal.m4: Likewise.
35 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
36 original source of this bit of code. It's not clear what the best fix
40 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
42 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
45 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
47 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
48 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
49 offset forms before the 15 bit forms, to default to the long forms.
52 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
54 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
56 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
58 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
59 symbol if none is present.
60 (print_insn_big_arm): Prevent examination of stored symbol if
63 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
65 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
67 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
69 * disassemble.c: Remove disasm_symaddr() function.
71 * arm-dis.c: Use info->symbol instead of info->flags to determine
72 if disassmbly should be in Thumb or Arm mode.
74 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
76 * arm-dis.c: Add support for disassembling Thumb opcodes.
77 (print_insn_thumb): New function.
79 * disassemble.c (disasm_symaddr): New function.
81 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
82 (thumb_opcodes): Table of Thumb opcodes.
84 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
86 * m68k-opc.c (btst): Change Dd@s to Dd;b.
88 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
89 and 'v' as operand types.
91 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
93 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
94 <olivier.carmona@di.epfl.ch>.
95 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
96 which has a two word opcode with a one word argument.
99 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
101 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
102 unsigned, not signed.
103 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
107 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
109 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
110 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
111 (ftrv): Slay the cut-and-paste monster.
114 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
116 * d10v-dis.c (print_operand):
117 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
119 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
121 * d10v-opc.c (OPERAND_FLAG): Split into:
122 (OPERAND_FFLAG, OPERAND_CFLAG) .
126 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
128 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
129 field for all INSN_MACRO's.
132 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
134 * mips-opc.c (sync,cache): These are 3900 insns.
136 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
138 sh-opc.h (sh_table): Remove ftst/nan.
140 start-sanitize-vr5400
141 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
143 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
144 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
146 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
150 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
152 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
153 Add tx49 insns and configury.
156 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
158 * mips-opc.c (ffc, ffs): Fix mask.
161 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
163 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
167 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
169 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
170 start-sanitize-vr5400
171 Added VR5400 instructions.
172 (N5): New cpu-id macro.
174 (WR_HILO, RD_HILO, MOD_HILO): New macros.
176 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
178 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
179 (WR_HILO, RD_HILO, MOD_HILO): New macros.
181 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
183 * v850-dis.c (disassemble): Replace // with /* ... */
185 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
187 * sparc-opc.c: Add wr & rd for v9a asr's.
188 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
189 (v9a_asr_reg_names): New variable.
190 Patch from David Miller <davem@vger.rutgers.edu>.
192 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
194 * sparc-opc.c (v9notv9a): New insn type.
195 (IMPDEP): Move to the end to not conflict with edge8 et al.
196 Patch from David Miller <davem@vger.rutgers.edu>.
198 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
200 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
202 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
204 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
206 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
208 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
209 of disassemble_info structure to determine if an overlay address
210 has a matching symbol in low memory.
212 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
213 new symbol_at_address_func field in disassemble_info structure.
215 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
217 * v850-opc.c (extract_d22): Use signed arithmatic.
219 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
221 * mips-opc.c: Three op mult is not an ISA insn.
223 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
225 * mips-opc.c: Fix formatting.
227 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
229 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
230 than assuming that char is signed. Explicitly sign extend 16 bit
231 values, rather than assuming that short is 16 bits.
232 (OP_sI, OP_J, OP_DIR): Likewise.
235 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
237 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
241 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
243 * v850-opc.c: Fix typo in comment.
245 * v850-dis.c (disassemble): Add test of processor type when
248 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
250 * configure.in: Use a diversion to set enable_shared before the
251 arguments are parsed.
252 * configure: Rebuild.
254 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
256 * m68k-opc.c (TBL1): Use ! rather than `.
257 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
259 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
261 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
263 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
265 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
268 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
269 * aclocal.m4: Rebuild with new libtool.
270 * configure: Rebuild.
273 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
275 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
278 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
280 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
282 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
284 * v850-opc.c (v850_opcodes): Further rearrangements.
287 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
289 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
292 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
294 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
297 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
299 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
301 * mips16-opc.c: Added mips16 sdbbp.
304 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
306 * v850-opc.c: Initialise processors field of v850_opcode structure.
309 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
311 Merge changes from Martin Hunt:
313 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
315 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
316 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
317 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
319 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
321 * d30v-dis.c (print_insn): First operand of d*i (delayed
322 branch) instructions is relative.
324 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
325 (d30v_operand_table): Add IMM6S3 type.
326 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
328 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
329 and cmp instructions.
331 * d30v-opc.c: Correct entries for repeat*, and sat*.
332 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
333 types. Correct several formats.
335 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
337 * d30v-opc.c (pre_defined_registers): Change control registers.
339 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
340 SHORT_C2. Manual was incorrect.
342 * d30v-dis.c (lookup_opcode): Return value now indicates
343 if an opcode has a short and a long form. Used for deciding
344 to append a ".s" or ".l".
345 (print_insn): Append a ".s" to an instruction if it is
346 the short form and ".l" if it is a long form. Do not append
347 anything if the instruction has only one possible size.
349 * d30v-opc.c: Change mulx2h to require an even register.
350 New form: SHORT_A2; a SHORT_A form that needs an even
351 register as the first operand.
353 * d30v-dis.c (print_insn_d30v): Fix problem where the last
354 instruction was not being disassembled if there were an odd
355 number of instructions.
357 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
361 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
363 * v850-dis.c (disassemble): Improved display of register lists.
366 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
368 * sparc-opc.c (sparc_opcodes): Fix assembler args to
369 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
370 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
371 fandnot1s, fandnot2s.
373 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
375 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
377 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
379 * cgen-asm.c (cgen_parse_address): New argument resultp.
381 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
383 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
385 * mn10200-dis.c (disassemble): PC relative instructions are
386 relative to the next instruction, not the current instruction.
388 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
390 * v850-dis.c (disassemble): Only signed extend values that are not
391 returned by extract functions.
392 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
394 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
396 * v850-opc.c: Update comments. Remove use of
397 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
399 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
401 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
403 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
405 * configure: Rebuilt with latest devo autoconf for NT support.
407 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
409 * v850-dis.c (disassemble): Use curly brace syntax for register
412 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
413 where r0 is being used as a destination register.
416 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
418 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
422 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
424 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
425 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
426 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
427 Add insns to access SGR and DBR.
428 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
431 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
433 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
436 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
438 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
439 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
442 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
444 * configure (cgen_files): Add support for v850e target.
445 * configure.in (cgen_files): Add support for v850e target.
447 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
449 * configure (cgen_files): Add support for v850ea target.
450 * configure.in (cgen_files): Add support for v850ea target.
453 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
455 * configure.in (bfd_arc_arch): Add.
456 * configure: Rebuild.
457 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
458 * Makefile.in: Rebuild.
459 * arc-dis.c, arc-opc.c: New files.
460 * disassemble.c (ARCH_all): Define ARCH_arc.
461 (disassembler): Add ARC support.
463 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
466 * v850-dis.c (disassemble): Add support for v850EA instructions.
468 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
469 (v850_opcodes): Add v850EA instructions.
471 * v850-dis.c (disassemble): Add support for v850E instructions.
473 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
474 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
475 insert_spe, extract_spe): New Functions.
476 (v850_opcodes): Add v850E instructions.
479 * v850-opc.c: Reorganised and re-layed out to improve readability
482 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
484 * configure: Rebuild with autoconf 2.12.1.
486 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
488 * aclocal.m4, configure: Rebuild with new automake patches.
490 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
492 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
493 * acinclude.m4: Just include acinclude.m4 from BFD.
494 * aclocal.m4, configure: Rebuild.
496 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
498 * Makefile.am: New file, based on old Makefile.in.
499 * acconfig.h: New file.
500 * acinclude.m4: New file.
501 * stamp-h.in: New file.
502 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
503 Removed shared library handling; now handled by libtool. Replace
504 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
505 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
506 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
507 handling in AC_OUTPUT.
508 * dep-in.sed: Change .o to .lo.
509 * Makefile.in: Now built with automake.
510 * aclocal.m4: Now built with aclocal.
511 * config.in, configure: Rebuild.
513 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
515 * mips-opc.c: Fix typo/thinko in "eret" instruction.
518 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
520 * mips-opc.c: Fix coding of mtsa.
523 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
525 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
527 * sparc-dis.c (sorted_opcodes): New static local.
528 (struct opcode_hash): `opcode' is pointer to const element.
529 (build_hash): First arg is now table of sorted pointers.
530 (print_insn_sparc): Sort opcodes by sorting table of pointers.
531 (compare_opcodes): Update.
533 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
535 * cgen-opc.c: #include <ctype.h>.
536 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
537 Handle case insensitive hashing.
538 (hash_keyword_value): Change type of `value' to unsigned int.
540 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
542 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
543 precision FP, mark it as such. Likewise for double precision
544 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
547 (mips_builtin_opcodes): Remove non-existant r5900 instructions
551 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
553 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
554 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
557 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
559 * ppc-opc.c (extract_nsi): make unsigned expression signed before
561 (UNUSED): remove one level of parens, so MSVC doesn't choke on
562 nesting depth when all the macros are expanded.
564 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
566 * sparc-opc.c: The fcmp v9a instructions take an integer register
567 as a destination, not a floating point register. From Christian
568 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
570 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
572 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
573 syntax. From Roman Hodek
574 <rnhodek@faui22c.informatik.uni-erlangen.de>.
576 * i386-dis.c (twobyte_has_modrm): Fix pand.
578 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
580 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
582 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
584 * arm-dis.c: Add prototypes for arm_decode_shift and
587 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
589 * mips-opc.c: Add r3900 insns.
591 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
593 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
594 print delay slot instructions on the same line. When using a PC
595 relative load, add a comment with the value being loaded if it can
598 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
600 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
601 to pushS/popS for segment regs and byte constant so that
602 pushw/popw printed when in 16 bit data mode.
604 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
605 print cbtw, cwtd in 16 bit data mode.
606 * i386-dis.c (putop): extra case W to support above.
608 * i386-dis.c (print_insn_x86): print addr32 prefix when given
609 address size prefix in 16 bit address mode.
611 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
613 * sh-dis.c: Reindent. Rename local variable fprintf to
616 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
618 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
620 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
622 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
624 * mips16-opc.c (mip16_opcodes): same.
626 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
628 * m68k-opc.c (moveb): Change $d to %d.
630 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
632 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
633 (twobyte_has_modrm): Likewise.
635 (OP_MMX, OP_EM, OP_MS): New static functions.
637 * i386-dis.c: Revert patch of April 4. The output now matches
640 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
642 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
645 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
647 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
649 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
651 * Makefile.in (install): Depend upon installdirs.
652 (installdirs): New target.
654 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
656 From Thomas Graichen <graichen@rzpd.de>:
657 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
658 * configure: Rebuild.
660 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
662 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
663 Delete string{,s}.h support.
665 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
667 * cgen-asm.c (cgen_parse_operand_fn): New global.
668 (cgen_parse_{{,un}signed_integer,address}): Update call to
669 cgen_parse_operand_fn.
670 (cgen_init_parse_operand): New function.
671 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
672 from cgen_asm_init_parse.
673 (m32r_cgen_assemble_insn): New operand `errmsg'.
674 Delete call to as_bad, return error message to caller.
675 (m32r_cgen_asm_hash_keywords): #if 0 out.
677 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
679 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
681 [case 'J']: Fix typo in register name.
683 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
685 * configure.in: Substitute SHLIB_LIBS.
686 * configure: Rebuild.
687 * Makefile.in (SHLIB_LIBS): New variable.
688 ($(SHLIB)): Use $(SHLIB_LIBS).
690 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
692 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
694 * cgen-opc.c (hash_keyword_name): Improve algorithm.
696 * disassemble.c (disassembler): Handle m32r.
698 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
700 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
701 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
702 * Makefile.in (CFILES): Add them.
703 (ALL_MACHINES): Add them.
704 (dependencies): Regenerate.
705 * configure.in (cgen_files): New variable.
706 (bfd_m32r_arch): Add entry.
707 * configure: Regenerate.
709 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
711 * configure.in: Correct file names for bfd_mn10[23]00_arch.
712 * configure: Rebuild.
714 * Makefile.in: Rebuild dependencies.
716 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
718 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
721 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
723 * Branched binutils 2.8.
725 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
727 * m10200-dis.c: Rename from mn10200-dis.c.
728 * m10200-opc.c: Rename from mn10200-opc.c.
729 * m10300-dis.c: Rename from mn10300-dis.c
730 * m10300-opc.c: Rename from mn10300-opc.c.
731 * Makefile.in: Update accordingly.
733 * mips16-opc.c: Add mul and dmul macros.
735 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
737 * makefile.vms: Update CFLAGS, add clean target.
739 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
741 * mips-opc.c: Add "wait". From Ralf Baechle
742 <ralf@gnu.ai.mit.edu>.
744 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
745 * configure, config.in: Rebuild.
746 * sysdep.h: Include <stdlib.h> if it exists.
747 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
749 * Makefile.in: Rebuild dependencies.
751 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
753 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
754 Andrew Bray <andy@madhouse.demon.co.uk>.
756 * mips-opc.c: Add cast when setting mips_opcodes.
758 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
760 * v850-dis.c (disassemble): Fix sign extension problem.
761 * v850-opc.c (extract_d*): Fix sign extension problems to make
762 disassembly calculate branch offsets correctly.
764 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
766 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
768 * mips-opc.c: Add dctr and dctw.
771 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
773 * d30v-dis.c (print_insn): Change the way signed constants
776 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
778 * Makefile.in (BFD_H): New variable.
779 (HFILES): New variable.
780 (CFILES): Add all C files.
781 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
782 Delete old dependencies, and build new ones.
783 * dep-in.sed: New file.
785 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
787 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
789 start-sanitize-coldfire
790 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
792 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
795 end-sanitize-coldfire
796 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
798 * mn10200-opc.c: Change "trap" to "syscall".
799 * mn10300-opc.c: Add new "syscall" instruction.
801 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
803 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
804 mulul insns on the coldfire.
806 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
808 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
809 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
810 (print_insn_little_arm): Likewise.
812 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
814 Based on patches from H.J. Lu <hjl@lucon.org>:
815 * i386-dis.c (fetch_data): Add prototype.
816 * m68k-dis.c (fetch_data): Add prototype.
817 (dummy_print_address): Add prototype. Make static.
818 * ppc-opc.c (valid_bo): Add prototype.
819 * sparc-dis.c (build_hash_table): Add prototype.
820 (is_delayed_branch, compute_arch_mask): Add prototypes.
821 (print_insn_sparc): Make several local variables const.
822 (compare_opcodes): Change arguments to const PTR. Add prototype.
823 * sparc-opc.c (arg): Change name field to be const.
824 (lookup_name, lookup_value): Add prototypes. Change table and
825 name parameters to be const.
826 (sparc_encode_asi): Change name parameter to be const.
827 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
828 (sparc_encode_sparclet_cpreg): Likewise.
829 (sparc_decode_asi): Change return type to be const.
830 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
831 (sparc_decode_sparclet_cpreg): Likewise.
833 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
835 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
836 Solaris doesn't like the combined options, and the -f is
838 (stamp-tshlink, install): Likewise.
840 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
842 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
845 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
847 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
849 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
851 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
854 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
856 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
859 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
861 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
863 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
865 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
868 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
870 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
871 floatformat_to_double to make portable.
872 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
875 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
877 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
878 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
880 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
882 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
883 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
886 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
888 * tic80-opc.c (LSI_SCALED): Renamed from this ...
889 (OFF_SL_BR_SCALED): ... to this, and added the flag
890 TIC80_OPERAND_BASEREL to the flags word.
891 (tic80_opcodes): Replace all occurances of LSI_SCALED with
895 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
897 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
898 Change mips_opcodes from const array to a pointer,
899 and change bfd_mips_num_opcodes from const int to int,
900 so that we can increase the size of the mips opcodes table
904 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
906 * tic80-opc.c (tic80_predefined_symbols): Revert change to
907 store BITNUM values in the table in one's complement form
908 to match behavior when assembler is given a raw numeric
909 value for a BITNUM operand.
910 * tic80-dis.c (print_operand_bitnum): Ditto.
914 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
916 * d30v-opc.c: Removed references to FLAG_X.
919 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
921 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
924 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
926 * Makefile.in: Added d30v object files.
927 * configure: (bfd_d30v_arch) Rebuilt.
928 * configure.in: (bfd_d30v_arch) Added new case.
929 * d30v-dis.c: New file.
930 * d30v-opc.c: New file.
931 * disassemble.c (disassembler) Add entry for d30v.
935 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
937 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
938 representations for the floating point BITNUM values.
940 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
942 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
943 in the table in one's complement form, as they appear in the
945 (tic80_symbol_to_value): Use macros to access predefined
947 (tic80_value_to_symbol): Ditto.
948 (tic80_next_predefined_symbol): New function.
949 * tic80-dis.c (print_operand_bitnum): Remove code that did
950 one's complement for BITNUM values.
954 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
956 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
959 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
961 * makefile.vms: Remove 8 bit characters. Update to latest
964 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
966 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
968 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
970 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
971 (IMM24_PCREL): Likewise.
973 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
975 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
976 address for an extended PC relative instruction that is not a
979 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
981 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
985 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
987 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
988 (tic80_opcodes): Sort entries so that long immediate forms
989 come after short immediate forms, making it easier for
990 assembler to select the right one for a given operand.
993 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
995 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
997 (print_insn_mips16): Likewise.
1000 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
1002 * mips-opc.c: add r5900.
1005 start-sanitize-tic80
1006 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
1008 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
1009 a symbol class that restricts translation to just that
1010 class (general register, condition code, etc).
1012 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
1014 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
1015 and REG_DEST_E for register operands that have to be
1016 an even numbered register. Add REG_FPA for operands that
1017 are one of the floating point accumulator registers.
1018 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
1019 (tic80_opcodes): Change entries that need even numbered
1020 register operands to use the new operand table entries.
1021 Add "or" entries that are identical to "or.tt" entries.
1024 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
1026 * mips16-opc.c: Add new cases of exit instruction for
1028 * mips-dis.c (print_mips16_insn_arg): Display floating point
1029 registers in operands of exit instruction. Print `$' before
1030 register names in operands of entry and exit instructions.
1032 start-sanitize-tic80
1033 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
1035 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
1036 pairs for all predefined symbols recognized by the assembler.
1037 Also used by the disassembling routines.
1038 (tic80_symbol_to_value): New function.
1039 (tic80_value_to_symbol): New function.
1040 * tic80-dis.c (print_operand_control_register,
1041 print_operand_condition_code, print_operand_bitnum):
1042 Remove private tables and use tic80_value_to_symbol function.
1045 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1047 * d10v-dis.c (print_operand): Change address printing
1048 to correctly handle PC wrapping. Fixes PR11490.
1050 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
1052 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
1055 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
1057 * mips-dis.c (print_insn_mips16): Set insn_info information.
1058 (print_mips16_insn_arg): Likewise.
1060 * mips-dis.c (print_insn_mips16): Better handling of an extend
1061 opcode followed by an instruction which can not be extended.
1063 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
1065 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
1066 coldfire moveb instruction to not allow an address register as
1067 destination. Although the documentation does not indicate that
1068 this is invalid, experiments uncovered unexpected behavior.
1069 Added a comment explaining the situation. Thanks to Andreas
1070 Schwab for pointing this out to me.
1072 start-sanitize-tic80
1073 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
1075 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
1076 entries are presorted so that entries with the same mnemonic are
1077 adjacent to each other in the table. Sort the entries for each
1078 instruction so that this is true.
1081 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1083 * m68k-dis.c: Include <libiberty.h>.
1084 (print_insn_m68k): Sort the opcode table on the most significant
1085 nibble of the opcode.
1087 start-sanitize-tic80
1088 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
1090 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
1091 "vsub", "vst", "xnor", and "xor" instructions.
1092 (V_a1): Renamed from V_a, msb of accumulator reg number.
1093 (V_a0): Add macro, lsb of accumulator reg number.
1095 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
1097 * tic80-dis.c (print_insn_tic80): Broke excessively long
1098 function up into several smaller ones and arranged for
1099 the instruction printing function to be callable recursively
1100 to print vector instructions that have both a load and a
1101 math instruction packed into a single opcode.
1102 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
1103 to explain why it comes after the other vector opcodes.
1106 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1108 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
1109 move insns to handle immediate operands.
1111 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1113 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
1114 fix operand mask in the "moveml" entries for the coldfire.
1116 start-sanitize-tic80
1117 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
1119 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
1120 New macros for building vector instruction opcodes.
1121 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
1122 FMT_LI, which were unused. The field is now a flags field.
1123 Remove some opcodes that are possible, but illegal, such
1124 as long immediate instructions with doubles for immediate
1125 values. Add "vadd" and "vld" instructions.
1127 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
1129 * tic80-opc.c (tic80_operands): Reorder some table entries to make
1130 the order more logical. Move the shift alias instructions ("rotl",
1131 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
1132 interspersed with the regular sr.x and sl.x instructions. Add
1133 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
1134 "sub", "subu", "swcr", and "trap".
1136 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
1138 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
1139 (OFF_SL_PC): Renamed from OFF_SL.
1140 (OFF_SS_BR): New operand type for base relative operand.
1141 (OFF_SL_BR): New operand type for base relative operand.
1142 (REG_BASE): New operand type for base register operand.
1143 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
1144 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
1145 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
1147 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
1148 10 char field, padded with spaces on rhs, rather than a string
1149 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
1150 than old TIC80_OPERAND_RELATIVE. Add support for new
1151 TIC80_OPERAND_BASEREL flag bit.
1153 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
1155 * tic80-dis.c (print_insn_tic80): Print floating point operands
1157 * tic80-opc.c (SPFI): Add single precision floating point
1158 immediate operand type.
1159 (ROTATE): Add rotate operand type for shifts.
1160 (ENDMASK): Add for shifts.
1161 (n): Macro for the 'n' bit.
1162 (i): Macro for the 'i' bit.
1163 (PD): Macro for the 'PD' field.
1164 (P2): Macro for the 'P2' field.
1165 (P1): Macro for the 'P1' field.
1166 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
1170 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
1172 * mn10200-dis.c (disassemble): Mask off unwanted bits after
1173 adding in current address for pc-relative operands.
1175 start-sanitize-tic80
1176 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
1178 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
1179 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
1180 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
1181 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
1182 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
1183 REG_BASE_M_SI, REG_BASE_M_LI respectively.
1184 (REG_SCALED, LSI_SCALED): New operand types.
1185 (E): New macro for 'E' bit at bit 27.
1186 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
1187 opcodes, including the various size flavors (b,h,w,d) for
1188 the direct load and store instructions.
1190 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
1192 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
1194 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
1195 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
1196 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
1197 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
1198 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
1199 masks with "MASK_* & ~M_*" to get the M bit reset.
1200 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1202 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1204 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1205 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1206 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1208 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1209 CC, SICR, and LICR table entries.
1210 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1211 "bcnd", and "brcr" opcodes.
1214 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1216 * ppc-opc.c (powerpc_operands): Make comment match the
1217 actual fields (no shift field).
1218 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1219 start-sanitize-tic80
1220 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1221 partial implementation, work in progress.
1222 * tic80-opc.c (tic80_operands): Begin construction operands table.
1223 (tic80_opcodes): Continue populating opcodes table and start
1224 filling in the operand indices.
1225 (tic80_num_opcodes): Add this.
1228 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1230 * m68k-opc.c: Add #B case for moveq.
1232 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1234 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1235 before they are used.
1237 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1239 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1240 for "breakpoint" instruction.
1242 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1244 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1245 (dep): Use ALL_CFLAGS rather than CFLAGS.
1247 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1249 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1252 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1254 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1255 start-sanitize-tic80
1256 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1259 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1261 * mips16-opc.c: Add "abs".
1263 start-sanitize-tic80
1264 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1266 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1267 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1268 (disassembler): Add bfd_arch_tic80 support to set disassemble
1269 to print_insn_tic80.
1270 * tic80-dis.c (print_insn_tic80): Add stub.
1272 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1274 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1275 * configure: Regenerate with autoconf.
1276 * tic80-dis.c: Add file.
1277 * tic80-opc.c: Add file.
1280 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1282 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1284 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1286 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1287 (mn10200_opcodes): Use it for some logicals and btst insns.
1288 Add "break" and "trap" instructions.
1290 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1292 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1294 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1296 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1297 relative load or add now depends upon whether the instruction is
1300 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1302 * mn10200-dis.c: Finish writing disassembler.
1303 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1304 Fix mask for "jmp (an)".
1306 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1307 handle endianness issues for mn10300.
1309 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1311 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1313 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1314 instruction. Fix opcode field for "movb (imm24),dn".
1316 * mn10200-opc.c (mn10200_operands): Fix insertion position
1319 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1321 * mn10200-opc.c: Create mn10200 opcode table.
1322 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1323 but moving along nicely.
1325 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1327 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1329 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1331 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1332 specifiers for fmovem* instructions.
1334 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1336 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1338 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1340 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1343 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1345 * mn10300-opc.c: Add some comments explaining the various
1348 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1350 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1352 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1355 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1356 operand specifiers in fmovm* instructions.
1358 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1360 * ppc-opc.c (insert_li): Give an error if the offset has the two
1361 least significant bits set.
1363 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1365 * mips-dis.c (print_insn_mips16): Separate the instruction from
1366 the arguments with a tab, not a space.
1368 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1370 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1373 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1376 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1378 * configure: Rebuild with autoconf 2.12.
1380 Add support for mips16 (16 bit MIPS implementation):
1381 * mips16-opc.c: New file.
1382 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1383 (mips16_reg_names): New static array.
1384 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1385 after seeing a 16 bit symbol.
1386 (print_insn_little_mips): Likewise.
1387 (print_insn_mips16): New static function.
1388 (print_mips16_insn_arg): New static function.
1389 * mips-opc.c: Add jalx instruction.
1390 * Makefile.in (mips16-opc.o): New target.
1391 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1392 * configure: Rebuild.
1394 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1396 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1397 operand specifiers in *save, *restore and movem* instructions.
1399 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1402 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1403 register operands for immediate arithmetic, not, neg, negx, and
1404 set according to condition instructions.
1406 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1407 specifier of the effective-address operand in immediate forms of
1408 arithmetic instructions. The specifier for the immediate operand
1409 notes how and where the constant will be stored.
1411 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1413 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1416 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1419 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1421 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1423 * mn10300-dis.c (disassemble): Handle register lists.
1425 * mn10300-opc.c: Fix handling of register list operand for
1426 "call", "ret", and "rets" instructions.
1428 * mn10300-dis.c (disassemble): Print PC-relative and memory
1429 addresses symbolically if possible.
1430 * mn10300-opc.c: Distinguish between absolute memory addresses,
1431 pc-relative offsets & random immediates.
1433 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1435 (disassemble): Handle SPLIT and EXTENDED operands.
1437 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1439 * mn10300-dis.c: Rough cut at printing some operands.
1441 * mn10300-dis.c: Start working on disassembler support.
1442 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1444 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1446 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1448 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1450 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1452 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1454 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1455 register argument is calls and jmp instructions.
1457 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1459 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1460 getx operand. Fix opcode for mulqu imm,dn.
1462 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1464 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1465 in MN10300_OPERAND_SPLIT operands for how many bits
1466 appear in the basic insn word. Add IMM32_HIGH24,
1467 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1468 (mn10300_opcodes): Use new operands as needed.
1470 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1471 for bset, bclr, btst instructions.
1472 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1474 * mn10300-opc.c (mn10300_operands): Remove many redundant
1475 operands. Update opcode table as appropriate.
1476 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1477 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1479 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1481 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1482 operands (for indexed load/stores). Fix bitpos for DI
1483 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1484 few instructions that insert immediates/displacements in the
1485 middle of the instruction. Add IMM8E for 8 bit immediate in
1486 the extended part of an instruction.
1487 (mn10300_operands): Use new opcodes as appropriate.
1489 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1491 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1492 sequential so the assembler never parallelizes it with
1495 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1497 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1498 a data/address register that appears in register field 0
1499 and register field 1.
1500 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1502 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1504 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1505 standard disassembly.
1507 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1508 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1509 Recategorize PALcode instructions.
1511 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1513 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1515 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1517 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1518 there are no operand types.
1520 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1522 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1524 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1526 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1528 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1530 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1532 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1533 and sst.w instructions.
1535 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1538 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1540 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1543 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1545 * ppc-opc.c (PPCPWR2): Define.
1546 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1549 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1551 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1552 field for movhu instruction.
1554 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1555 cast value to "long" not "signed long" to keep hpux10
1558 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1560 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1563 * mn10300-opc.c (FMT*): Remove definitions.
1565 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1566 for shift-by-register opcodes.
1568 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1569 into [AD][MN][01] for encoding the position of the register
1572 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1574 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1575 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1577 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1579 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1580 Fix various typos. Add "PAREN" operand.
1581 (MEM, MEM2): Define.
1582 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1583 operands. Fix several typos.
1585 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1588 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1590 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1591 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1593 (mn10300_opcodes): Break opcode format out into its own field.
1594 Update many operand fields to deal with signed vs unsigned
1595 issues. Fix one or two typos in the "mov" instruction
1596 opcode, mask and/or operand fields.
1598 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1600 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1601 m68851 wasn't reset.
1603 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1605 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1606 all opcodes. Very rough cut at operands for all opcodes.
1608 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1611 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1613 * mn10200-opc.c, mn10300-opc.c: New files.
1614 * mn10200-dis.c, mn10300-dis.c: New files.
1615 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1616 * disassemble.c: Break mn10x00 support into 10200 and 10300
1618 * configure.in: Likewise.
1619 * configure: Rebuilt.
1621 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1623 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1625 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1627 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1629 * disassemble (ARCH_mn10x00): Define.
1630 (disassembler): Handle bfd_arch_mn10x00.
1631 * configure.in: Recognize bfd_mn10x00_arch.
1632 * configure: Rebuilt.
1634 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1636 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1637 accordingly. Don't declare functions using op_rtn.
1639 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1641 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1642 params to be more standard.
1643 * (disassemble): Print absolute addresses and symbolic names for
1644 branch and jump targets.
1645 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1647 * (v850_opcodes): Add breakpoint insn.
1649 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1651 * m68k-opc.c: Move the fmovemx data register cases before the
1652 other cases, so that they get recognized before the data register
1653 does gets treated as a degenerate register list.
1655 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1657 * mips-opc.c: Add a case for "div" and "divu" with two registers
1658 and a destination of $0.
1660 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1662 * mips-dis.c (print_insn_arg): Add prototype.
1663 (_print_insn_mips): Ditto.
1665 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1667 * mips-dis.c (print_insn_arg): Print condition code registers as
1670 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1672 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1674 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1676 * v850-dis.c (disassemble): Make static. Provide prototype.
1678 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1680 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1683 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1685 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1686 ']' characters into the output stream.
1687 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1688 Add "memop" field to all opcodes (for the disassembler).
1689 Reorder opcodes so that "nop" comes before "mov" and "jr"
1690 comes before "jarl".
1692 * v850-dis.c (print_insn_v850): Fix typo in last change.
1694 * v850-dis.c (print_insn_v850): Properly handle disassembling
1695 a two byte insn at the end of a memory region when the memory
1696 region's size is only two byte aligned.
1698 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1700 * v850-dis.c (v850_reg_names): Define.
1701 (v850_sreg_names, v850_cc_names): Likewise.
1702 (disassemble): Very rough cut at printing operands (unformatted).
1704 * v850-opc.c (BOP_MASK): Fix.
1705 (v850_opcodes): Fix mask for jarl and jr.
1707 * v850-dis.c: New file. Skeleton for disassembler support.
1708 * Makefile.in Remove v850 references, they're not needed here.
1709 * configure.in: Add v850-dis.o when building v850 toolchains.
1710 * configure: Rebuilt.
1711 * disassemble.c (disassembler): Call v850 disassembler.
1713 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1714 (insert_d8_6, extract_d8_6): New functions.
1715 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1716 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1718 (IF4A, IF4B): Use "D7" instead of "D7S".
1719 (IF4C, IF4D): Use "D8_7" instead of "D8".
1720 (IF4E, IF4F): New. Use "D8_6".
1721 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1722 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1724 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1725 (v850_operands): Change D16 to D16_15, use special insert/extract
1726 routines. New new D16 that uses the generic insert/extract code.
1727 (IF7A, IF7B): Use D16_15.
1728 (IF7C, IF7D): New. Use D16.
1729 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1731 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1732 message. Issue an error if the branch offset is odd.
1734 * v850-opc.c: Add notes about needing special insert/extract
1735 for all the load/store insns, except "ld.b" and "st.b".
1737 * v850-opc.c (insert_d22, extract_d22): New functions.
1738 (v850_operands): Use insert_d22 and extract_d22 for
1740 (insert_d9): Fix range check.
1742 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1744 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1745 and set bits field to D9 and D22 operands.
1747 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1749 * v850-opc.c (v850_operands): Define SR2 operand.
1750 (v850_opcodes): "ldsr" uses R1,SR2.
1752 * v850-opc.c (v850_opcodes): Fix opcode specs for
1753 sld.w, sst.b, sst.h, sst.w, and nop.
1755 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1757 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1758 end of the opcode table.
1760 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1762 * d10v-opc.c (pre_defined_registers): Added register pairs,
1763 "r0-r1", "r2-r3", etc.
1765 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1767 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1768 Create I16U for an unsigned 16bit mmediate operand.
1769 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1771 * v850-opc.c (v850_operands): Define EP operand.
1772 (IF4A, IF4B, IF4C, IF4D): Use EP.
1774 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1775 with immediate operand, "movhi". Tweak "ldsr".
1777 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1778 correct. Get sld.[bhw] and sst.[bhw] closer.
1780 * v850-opc.c (v850_operands): "not" is a two byte insn
1782 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1784 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1786 * v850-opc.c (two): Get order of words correct.
1788 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1790 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1791 register source and destination operands.
1792 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1794 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1795 same thinko in "trap" opcode.
1797 * v850-opc.c (v850_opcodes): Add initializer for size field
1800 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1801 Add D8 for 8-bit unsigned field in short load/store insns.
1802 (IF4A, IF4D): These both need two registers.
1803 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1804 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1805 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1806 for "ldsr" and "stsr".
1807 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1810 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1811 short store word (sst.w).
1813 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1815 * v850-opc.c (v850_operands): Added insert and extract fields,
1816 pointers to functions that handle unusual operand encodings.
1818 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1820 * v850-opc.c (v850_opcodes): Enable "trap".
1822 * v850-opc.c (v850_opcodes): Fix order of displacement
1823 and register for "set1", "clr1", "not1", and "tst1".
1825 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1827 * v850-opc.c (v850_operands): Add "B3" support.
1828 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1831 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1833 * v850-opc.c: Close unterminated comment.
1835 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1837 * v850-opc.c (v850_operands): Add flags field.
1838 (v850_opcodes): add move opcodes.
1840 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1842 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1843 * configure: (bfd_v850v_arch) Add new case.
1844 * configure.in: (bfd_v850_arch) Add new case.
1845 * v850-opc.c: New file.
1847 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1849 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1851 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1853 * d10v-opc.c: Add additional information to the opcode
1854 table to help determinine which instructions can be done
1857 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1859 * mpw-make.sed: Update editing of include pathnames to be
1862 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1864 * arm-opc.h: Added "bx" instruction definition.
1866 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1868 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1870 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1872 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1874 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1876 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1878 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1880 * makefile.vms: Update for alpha-opc changes.
1882 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1884 * i386-dis.c (print_insn_i386): Actually return the correct value.
1885 (ONE, OP_ONE): #ifdef out; not used.
1887 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1889 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1890 Changed subi operand type to treat 0 as 16.
1892 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1894 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1897 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1899 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1900 memory transfer instructions. Add new format string entries %h and %s.
1901 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1904 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1906 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1907 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1909 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1911 * alpha-dis.c (print_insn_alpha_osf): Remove.
1912 (print_insn_alpha_vms): Remove.
1913 (print_insn_alpha): Make globally visible. Chose the register
1914 names based on info->flavour.
1915 * disassemble.c: Always return print_insn_alpha for the alpha.
1917 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1919 * d10v-dis.c (dis_long): Handle unknown opcodes.
1921 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1923 * d10v-opc.c: Changes to support signed and unsigned numbers.
1924 All instructions with the same name that have long and short forms
1925 now end in ".l" or ".s". Divs added.
1926 * d10v-dis.c: Changes to support signed and unsigned numbers.
1928 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1930 * d10v-dis.c: Change all functions to use info->print_address_func.
1932 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1934 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1935 move ccr/sr insns more strict so that the disassembler only
1936 selects them when the addressing mode is data register.
1938 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1939 * d10v-opc.c (pre_defined_registers): Declare.
1940 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1941 to pick a better name for the registers.
1943 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1945 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1946 operands for fexpand and fpmerge. From Christian Kuehnke
1947 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1949 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1951 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1952 print routine. Take new regnames and cpumask arguments.
1953 Kill the environment variable nonsense.
1954 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1955 (print_insn_alpha_vms): New function. Do VMS style regnames.
1956 * disassemble.c (disassembler): Test bfd flavour to pick
1957 between OSF and VMS routines. Default to OSF.
1959 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1961 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1962 * configure: Rebuild.
1963 * Makefile.in (install): Use @INSTALL_SHLIB@.
1965 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1967 * configure: (bfd_d10v_arch) Add new case.
1968 * configure.in: (bfd_d10v_arch) Add new case.
1969 * d10v-dis.c: New file.
1970 * d10v-opc.c: New file.
1971 * disassemble.c (disassembler) Add entry for d10v.
1973 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1975 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1976 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1978 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1980 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1981 distinguish between variants of the instruction set.
1982 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1983 distinguish between variants of the instruction set.
1985 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1987 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1988 the 8086 instruction set.
1989 * i386-dis.c: General cleanups. Make most things static. Add
1990 prototypes. Get rid of static variables aflags and dflags. Pass
1991 them as args (to almost everything).
1993 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1995 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1997 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1999 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
2000 if the next arg is marked with SRC_IN_DST. Gross.
2002 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
2003 we're looking for and find EXR.
2005 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
2006 if we're looking for KBIT and we don't find it.
2008 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
2011 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
2012 3bit immediate operands.
2014 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
2016 * Released binutils 2.7.
2018 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
2019 <kkaempf@progis.ac-net.de>.
2021 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
2023 * alpha-opc.c: Correct second case of "mov" to use OPRL.
2025 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
2027 * sparc-dis.c (print_insn_sparclite): New routine to print
2028 sparclite instructions.
2030 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2032 * m68k-opc.c (m68k_opcodes): Add coldfire support.
2034 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
2036 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
2037 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
2038 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
2040 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2042 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
2043 Use autoconf-set values.
2044 (docdir, oldincludedir): Removed.
2045 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
2047 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
2049 * alpha-opc.c: New file.
2050 * alpha-opc.h: Remove.
2051 * alpha-dis.c: Complete rewrite to use new opcode table.
2052 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
2053 * configure: Rebuild with autoconf 2.10.
2054 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
2055 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
2057 (alpha-opc.o): New target.
2059 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
2061 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
2062 Set imm_added_to_rs1 even if the source and destination register
2065 * sparc-opc.c: Add some two operand forms of the wr instruction.
2067 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
2069 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
2072 * disassemble.c (disassembler): Handle H8/S.
2073 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
2075 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
2077 * sparc-opc.c: Add beq/teq as aliases for be/te.
2079 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
2080 <sergei@msil.sps.mot.com>.
2082 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
2084 * makefile.vms: New file.
2086 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
2088 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
2090 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
2093 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
2095 * i386-dis.c (OP_OFF): Call append_prefix.
2097 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2099 * ppc-opc.c (instruction encoding macros): Add explicit casts to
2100 unsigned long to silence a warning from the Solaris PowerPC
2103 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
2105 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
2107 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
2109 * sparc-dis.c (X_IMM,X_SIMM): New macros.
2111 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
2112 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
2113 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
2114 cpush, cpusha, cpull sparclet insns.
2116 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
2118 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
2120 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
2122 * sparc-opc.c: Set F_FBR on floating point branch instructions.
2123 Set F_FLOAT on other floating point instructions.
2125 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2127 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
2129 (powerpc_opcodes): Add 860/821 specific SPRs.
2131 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
2133 * configure.in: Permit --enable-shared to specify a list of
2134 directories. Set and substitute BFD_PICLIST.
2135 * configure: Rebuild.
2136 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
2137 uses. Set to @BFD_PICLIST@.
2139 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
2141 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
2142 not "abs", which may be needed for the absolute in something
2143 like btst #0,@10:8. Print L_3 immediates separately from other
2144 immediates. Change ABSMOV reference to ABS8MEM.
2146 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
2148 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
2149 (current_arch_mask): New static global.
2150 (compute_arch_mask): New static function.
2151 (print_insn_sparc): Delete sparc_v9_p. New static local
2152 current_mach. Resort opcode table if current_mach changes.
2153 Generalize "insn not supported" test.
2154 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
2155 Delete test for v9/!v9.
2156 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
2158 (brfc): Split into CBR and FBR for coprocessor/fp branches.
2159 (brfcx): Renamed to FBRX.
2160 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
2161 coprocessor mnemonics are not supported on the sparclet).
2162 (condf): Renamed to CONDF.
2163 (SLCBCC2): Delete F_ALIAS flag.
2165 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
2167 * sparc-opc.c (sparc_opcodes): rd must be 0 for
2168 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
2170 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
2172 * Makefile.in (config.status): Depend upon BFD VERSION file, so
2173 that the shared library version number is set correctly.
2175 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
2177 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
2178 Miles Bader <miles@gnu.ai.mit.edu>.
2179 * configure: Rebuild.
2181 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
2183 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
2186 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
2188 * configure: Rebuild with autoconf 2.8.
2190 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
2192 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
2193 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
2195 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
2197 * configure.in: Don't set SHLIB or SHLINK to an empty string,
2198 since they appear as targets in Makefile.in.
2199 * configure: Rebuild.
2201 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2203 * mpw-make.sed: Edit out shared library support bits.
2205 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2207 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2208 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2209 (sparc_opcodes): Add sparclet insns.
2210 (sparclet_cpreg_table): New static local.
2211 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2212 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2214 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2216 * i386-dis.c (index16): New static variable.
2217 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2219 (OP_indirE): Return result of OP_E.
2220 (OP_E): Check for 16 bit addressing mode, and disassemble
2221 correctly. Optimised 32 bit case a little. Don't print
2222 "(base,index,scale)" when sib specifies only an offset.
2224 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2226 * configure.in: Set and substitute SHLIB_DEP.
2227 * configure: Rebuild.
2228 * Makefile.in (SHLIB_DEP): New variable.
2229 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2230 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2231 COMMON_SHLIB, add them to piclist with appropriate modifications.
2232 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2233 here: just use piclist.
2235 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2237 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2238 (print_insn_sparc): Rewrite v9/not-v9 tests.
2239 (compare_opcodes): Likewise.
2240 * sparc-opc.c (MASK_<ARCH>): Define.
2241 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2242 (sparclet,v6notv9): Define.
2243 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2244 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2246 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2248 * configure.in: Call AC_PROG_CC before configure.host.
2249 * configure: Rebuild.
2251 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2253 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2255 * i386-dis.c (onebyte_has_modrm): New static array.
2256 (twobyte_has_modrm): New static array.
2257 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2259 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2261 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2264 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2266 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2269 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2271 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2272 m68010up, not just m68020up | cpu32.
2274 * Makefile.in (SONAME): New variable.
2275 ($(SHLINK)): Make a link to the transformed name, as well.
2276 (stamp-tshlink): New target.
2277 (install): Skip stamp-tshlink during install.
2279 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2281 * configure.in: Call AC_ARG_PROGRAM.
2282 * configure: Rebuild.
2283 * Makefile.in (program_transform_name): New variable.
2284 (install): Transform library name before installing it.
2286 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2288 * i960-dis.c (mem): Add HX dcinva instruction.
2290 Support for building as a shared library, based on patches from
2291 Alan Modra <alan@spri.levels.unisa.edu.au>:
2292 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2293 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2294 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2295 * configure: Rebuild.
2296 * Makefile.in (ALLLIBS): New variable.
2297 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2298 (COMMON_SHLIB, SHLINK): New variables.
2299 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2300 (STAGESTUFF): Remove variable.
2301 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2302 (stamp-piclist, piclist): New targets.
2303 ($(SHLIB), $(SHLINK)): New targets.
2304 ($(OFILES)): Depend upon stamp-picdir.
2305 (disassemble.o): Build twice if PICFLAG is set.
2306 (MOSTLYCLEAN): Add pic/*.o.
2307 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2308 (distclean): Remove pic and stamp-picdir.
2309 (install): Install shared libraries.
2310 (stamp-picdir): New target.
2312 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2314 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2315 Print unknown instruction as "unknown", rather than in hex.
2317 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2319 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2321 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2323 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2325 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2327 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2328 when necessary. From Ulrich Drepper
2329 <drepper@myware.rz.uni-karlsruhe.de>.
2331 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2333 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2334 sparc_num_opcodes. Update architecture enum values.
2335 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2336 (sparc_opcode_lookup_arch): New function.
2337 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2338 (sparc_opcodes): Add v9a shutdown insn.
2340 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2342 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2343 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2345 (print_insn_sparc64): Deleted.
2346 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2349 * sparc-opc.c (architecture_pname): Add v9a.
2351 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2353 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2354 incorrectly defined as 0x16 when it should be 0x15.
2355 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2356 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2357 excb (exception barrier) which is defined in the Alpha
2358 Architecture Handbook version 2.
2359 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2360 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2361 disassembled as or, for example.
2363 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2365 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2366 (_print_insn_mips): Change i from int to unsigned int.
2368 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2370 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2371 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2373 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2375 * i386-dis.c: Added Pentium Pro instructions.
2377 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2379 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2382 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2384 * sh-opc.h (sh_nibble_type): Added REG_B.
2385 (sh_arg_type): Added A_REG_B.
2386 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2388 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2390 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2392 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2394 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2396 * Makefile.in (distclean): Remove stamp-h. From Ronald
2397 F. Guilmette <rfg@monkeys.com>.
2399 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2401 From David Mosberger-Tang <davidm@azstarnet.com>:
2402 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2405 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2407 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2408 (sh_table): Added many SH3 opcodes.
2409 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2411 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2413 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2414 (subco,subco.): Mark this PPC, not PPCCOM.
2416 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2418 * configure: Rebuild with autoconf 2.7.
2420 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2422 * configure: Rebuild with autoconf 2.6.
2424 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2426 * configure.in: Sort list of architectures. Accept but do nothing
2427 for alliant, convex, pyramid, romp, and tahoe.
2429 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2431 * a29k-dis.c (print_special): Change num to unsigned int.
2433 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2435 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2438 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2440 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2441 * configure: Rebuilt.
2443 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2445 * configure.in: Add case for bfd_i860_arch.
2446 * configure: Rebuild.
2448 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2450 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2451 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2452 (NEXTDOUBLE): Likewise.
2453 (print_insn_m68k): Don't match fmoveml if there is more than one
2454 register in the list.
2455 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2457 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2459 * m68k-opc.c: Use #W rather than #w.
2460 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2462 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2464 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2465 and likewise for all the dbxx opcodes.
2467 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2469 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2471 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2473 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2474 the VR4100 specific instructions to the mips_opcodes structure.
2476 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2478 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2479 ugly Metrowerks bug in CW6, is fixed in CW7.
2481 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2483 * ppc-opc.c (whole file): Add flags for common/any support.
2485 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2487 * Makefile.in (BISON): Remove macro.
2488 (FLAGS_TO_PASS): Remove BISON.
2490 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2492 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2494 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2495 instructions that take no args by looking at the match mask.
2496 (print_insn_arg): Always print "%" before register names.
2497 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2498 [case '_']: Don't print "@#" before address.
2499 [case 'J']: Use "%s" as format string, not register name.
2500 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2502 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2504 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2507 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2509 From David Mosberger-Tang <davidm@azstarnet.com>
2511 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2512 (alpha_insn_set): added definitions for VAX floating point
2513 instructions (Unix compilers don't generate these, but handcoded
2514 assembly might still use them).
2516 * alpha-dis.c (print_insn_alpha): added support for disassembling
2517 the miscellaneous instructions in the Alpha instruction set.
2519 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2521 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2522 no longer create sysdep.h, sed ppc-opc.c to work around a
2523 serious Metrowerks C bug.
2524 * mpw-make.in: Remove.
2525 * mpw-make.sed: New file, used by mpw-configure to edit
2526 Makefile.in into an MPW makefile.
2528 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2530 * Makefile.in (maintainer-clean): New synonym for realclean.
2532 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2534 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2535 which use '0', '1', and '2' instead. Specify the proper size for
2536 a pmove immediate operand. Correct the pmovefd patterns to be
2537 moves to a register, not from a register.
2538 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2540 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2542 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2543 %psr, %wim, %tbr as F_NOTV9.
2545 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2547 * Makefile.in (Makefile): Just rebuild Makefile when running
2549 (config.h, stamp-h): New targets.
2550 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2551 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2552 rebuilding config.h.
2553 * configure: Rebuild.
2555 * mips-opc.c: Change unaligned loads and stores with "t,A"
2556 operands to use "t,A(b)".
2558 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2560 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2562 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2564 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2565 until 3 instead of until 2.
2567 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2569 * Makefile.in (ALL_CFLAGS): Define.
2570 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2571 (MOSTLYCLEAN): Add config.log.
2572 (distclean): Don't remove config.log.
2573 * configure.in: Substitute HDEFINES.
2574 * configure: Rebuild.
2576 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2578 * sh-opc.h (sh_arg_type): Add F_FR0.
2579 (sh_table, case fmac): Add F_FR0 as first argument.
2581 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2583 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2585 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2587 * sparc-dis.c: Remove all references to NO_V9.
2589 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2591 * aclocal.m4: Just include ../bfd/aclocal.m4.
2592 * configure: Rebuild.
2594 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2596 * sparc-dis.c (X_DISP19): Define.
2597 (print_insn, case 'G'): Use it.
2598 (print_insn, case 'L'): Sign extend displacement.
2600 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2602 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2603 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2604 host_makefile_frag or frags.
2605 * aclocal.m4: New file.
2606 * configure: Rebuild.
2607 * Makefile.in (INSTALL): Set to @INSTALL@.
2608 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2609 (INSTALL_DATA): Set to @INSTALL_DATA@.
2611 (AR_FLAGS): Set to rc rather than qc.
2612 (CC): Define as @CC@.
2613 (CFLAGS): Set to @CFLAGS@.
2614 (@host_makefile_frag@): Remove.
2615 (config.status): Remove dependency upon @frags@.
2617 * configure.in: ../bfd/config.bfd now just sets shell variables.
2618 Use them rather than looking through target Makefile fragments.
2619 * configure: Rebuild.
2621 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2623 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2625 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2627 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2628 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2631 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2632 (lookup_{name,value}): New functions.
2633 (prefetch_table): New static local.
2634 (sparc_{encode,decode}_prefetch): New functions.
2635 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2637 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2639 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2642 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2644 * sh-dis.c: Correct comment on first line of file.
2646 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2648 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2650 * sparc-opc.c (asi, membar): New static locals.
2651 (sparc_{encode,decode}_{asi,membar}): New functions.
2652 (sparc_opcodes, membar insn): Fix.
2653 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2654 Support decoding of membar masks.
2657 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2659 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2661 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2663 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2664 and likewise for the other branches. Add bhs as an alias for bcc,
2665 and likewise for the size variants. Add dbhs as an alias for
2668 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2670 * sh-opc.h (FP sts instructions): Update to match reality.
2672 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2674 * m68k-dis.c: (fpcr_names): Add % before all register names.
2675 (reg_names): Likewise.
2676 (print_insn_arg): Don't explicitly print % before register names.
2677 Add % before register names in static array names. In case 'r',
2678 print data registers as `@(Dn)', not `Dn@'. When printing a
2679 memory address, don't print @# before it.
2680 (print_indexed): Change base_disp and outer_disp from int to
2681 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2682 syntax. Sign extend 8 byte displacement correctly.
2683 (print_base): Print using MIT syntax. Print zpc when appropriate.
2684 Change parameter disp from int to bfd_vma.
2686 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2689 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2691 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2692 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2693 * sh-opc.h (sh_arg_type): Add new operand types.
2694 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2696 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2698 * Makefile.in (distclean): Remove generated file config.h.
2700 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2702 * Makefile.in (distclean): Remove generated file config.h.
2704 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2706 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2708 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2710 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2711 rather than numopcodes. Use m68k_opcodes rather than removed
2712 opcode function. Don't check F_ALIAS.
2713 (print_insn_arg): Change first parameter to be const char *.
2714 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2715 (m68k-opc.o): New target.
2716 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2717 * configure: Rebuild.
2719 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2721 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2722 (opcode_bits, opcode_hash_table): New variables.
2723 (opcodes_initialized): Renamed from opcodes_sorted.
2724 (build_hash_table): New function.
2725 (is_delayed_branch): Use hash table.
2726 (print_insn): Renamed from print_insn_sparc, made static.
2727 Build and use hash table. If !sparc64, ignore sparc64 insns,
2728 and vice-versa if sparc64.
2729 (print_insn_sparc, print_insn_sparc64): New functions.
2730 (compare_opcodes): Move sparc64 opcodes to end.
2731 Print commutative insns with constant second.
2732 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2734 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2736 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2737 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2738 avoids printing a delay slot in a delay slot.
2739 * sh-opc.h (sh_table): Fully bracket last entry.
2741 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2743 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2745 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2747 * configure.in: Get host_makefile_frag from ${srcdir}.
2749 * configure.in: Autoconfiscated. Check for string[s].h. Create
2750 config.h from config.in. Don't set up sysdep.h link.
2751 * sysdep.h: New file.
2752 * configure, config.in: New files, generated from configure.in.
2753 * Makefile.in: Updated to be processed autoconf-style.
2754 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2755 (Makefile): Depend on config.status.
2756 (config.status): New rule.
2757 * configure.bat: Update Makefile substitutions.
2759 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2761 * mips-opc.c (L1): Define.
2762 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2763 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2766 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2768 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2769 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2770 have multiple add units but only a single logical unit.
2772 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2773 shifted by 18, without any insertion or extraction function.
2774 (insert_cr, extract_cr): Remove.
2776 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2778 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2781 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2783 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2784 * sh-opc.h: Add copyright.
2786 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2788 * Makefile.in (crunch-m68k): Delete extra target accidentally
2789 checked in a while ago.
2791 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2793 * sh-opc.h (sh_table): Add SH3 support.
2795 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2797 * sh-opc.h: Added bsrf and braf.
2799 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2801 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2802 bogus [ls]fm{ea,fd} patterns.
2804 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2805 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2806 initialize it from memory. Make function static.
2807 (print_insn_{big,little}_arm): New functions.
2808 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2809 the correct endianness.
2811 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2813 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2816 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2818 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2819 17th, so that it builds again using GCC as the compiler.
2821 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2823 * mips-dis.c (print_insn_little_mips): Cast return value from
2824 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2825 expects an unsigned long, and that might be fewer words of
2826 argument storage (e.g., if bfd_vma is long long on a 32-bit
2828 (print_insn_big_mips): Likewise with bfd_getb32 value.
2829 (_print_insn_mips): Now static.
2831 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2833 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2834 gcc memory hog problem with initializer is fixed.
2836 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2838 Merge in support for Mac MPW as a host.
2839 (Old change descriptions retained for informational value.)
2841 * mpw-config.in (archname): Compute from the config.
2842 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2844 * mpw-config.in (target_arch): Compute from canonical target.
2845 (m68k, mips, powerpc, sparc): Add architectures.
2846 * mpw-make.in (disassemble.c.o): Add.
2847 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2849 * mpw-config.in (BFD_MACHINES): Set to a default value.
2850 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2852 * mpw-make.in (CSEARCH): Add extra-include to search path.
2854 * mpw-config.in (varargs.h): Don't create.
2855 (sysdep.h): Create using forward-include.
2856 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2858 * mpw-config.in: New file, MPW version of configure.in.
2859 * mpw-make.in: New file, MPW version of Makefile.in.
2861 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2863 * alpha-dis.c (print_insn_alpha): Put empty statement after
2866 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2868 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2869 (low_sign_extend): Likewise.
2870 (get_field): Delete unused function.
2871 (set_field, deposit_14, deposit_21): Likewise.
2873 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2875 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2878 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2880 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2882 * alpha-opc.h (OSF_ASMCODE): define
2883 print pal-code names as defined in App C of the
2884 Alpha Architecture Reference Manual
2886 * alpha-dis.c: cleaned up output
2887 print stylized code forms as defined in App A.4.3 of the
2888 Alpha Architecture Reference Manual
2890 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2892 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2894 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2897 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2899 * m68k-dis.c (opcode): New function. Returns address of opcode
2900 table entry given index, even if the opcode table was split to
2901 work around gcc bugs.
2902 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2904 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2905 (reg_names): Now const.
2906 (print_insn_arg): Arrays cacheFieldName and names now const.
2907 (print_indexed): Array scales now const.
2909 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2911 * ppc-opc.c: Sort recently added instructions by minor opcode
2912 number within major opcode number.
2914 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2916 * hppa-dis.c: Include libhppa.h.
2918 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2920 * mips-opc.c: Change dli to use M_DLI, and add dla.
2922 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2924 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2926 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2928 * mips-opc.c: Add r4650 mul instruction.
2930 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2932 * mips-opc.c: Add uld and usd macros for unaligned double load and
2935 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2937 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2938 mfdcr, mtdcr, icbt, iccci.
2940 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2942 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2943 signed char fields to shorts, more portable.
2945 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2947 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2948 char fields as signed chars, since they may have negative values.
2950 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2952 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2953 (mycroft@netbsd.org).
2955 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2957 From "Logg, Ed" <elogg@ea.com>:
2958 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2959 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2962 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2964 * ppc-opc.c: Changes based on patch from David Edelsohn
2965 <edelsohn@mhpcc.edu>.
2966 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2969 (insert_tbr): New static function.
2970 (extract_tbr): New static function.
2971 (XFXFXM_MASK, XFXM): Define.
2972 (XSPRBAT_MASK, XSPRG_MASK): Define.
2973 (powerpc_opcodes): Add instructions to access special registers by
2974 name. Add mtcr and mftbu.
2976 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2978 * mips-opc.c (P3): Define.
2979 (mips_opcodes): Add mad and madu.
2981 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2983 * configure.in: Add W65 support.
2984 * disassemble.c: Likewise.
2985 * w65-opc.h, w65-dis.c: New files.
2987 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2989 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2992 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2994 * mips-opc.c: Add dli as a synonym for li.
2996 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2998 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2999 print something for reserved opcode values, even if it won't
3002 * mips-dis.c (_print_insn_mips): When initializing, shift right
3003 and mask, to avoid sign extension problems on the Alpha.
3005 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
3008 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
3010 * sh-opc.h (mov.l gbr): Get direction right.
3011 * sh-dis.c (print_insn_shx): New function.
3012 (print_insn_shl, print_insn_sh): Call print_insn_shx to
3013 print opcodes with right byte order.
3015 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
3017 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
3018 to avoid conflicts with getopt.
3020 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3022 * hppa-dis.c (print_insn_hppa): Read the instruction using
3023 bfd_getb32, so that it works on a little endian or 64 bit host.
3024 Remove unused local variable op.
3026 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3028 * mips-opc.c: Use or instead of addu for pseudo-op move, since
3029 addu does not work correctly if -mips3.
3031 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3033 * a29k-dis.c (print_special): Add special register names defined
3034 on 29030, 29040 and 29050.
3035 (print_insn): Handle new operand type 'I'.
3037 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3039 * Makefile.in (INSTALL): Use top level install.sh script.
3041 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3043 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
3044 that it works on a little endian host.
3046 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
3048 * configure.in: Use ${config_shell} when running config.bfd.
3050 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3052 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
3054 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3056 * a29k-dis.c (print_insn): Print the opcode.
3058 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3060 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
3062 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
3064 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
3066 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3068 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
3069 which store a value into memory.
3071 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
3073 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
3074 * arm-dis.c, arm-opc.h: New files.
3076 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
3078 * Makefile.in (ns32k-dis.o): Add dependency.
3079 * ns32k-dis.c (print_insn_arg): Declare initialized local as
3080 string, not as array of chars.
3082 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3084 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
3086 * sparc-opc.c: Added sparclite extended FP operations, and
3087 versions of v9 impdep* instructions permitting specification of
3090 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3092 * i960-dis.c (reg_names): Now const.
3093 (struct sparse_tabent): New type, copied from array type in mem
3095 (ctrl): Local static array ctrl_tab now const.
3096 (cobr): Local static array cobr_tab now const.
3097 (mem): Local variables reg1, reg2, reg3 now point to const. Local
3098 static variable mem_tab no longer explicitly initialized. Changed
3099 mem_init to const array of struct sparse_tabent.
3100 (reg): Local static variable reg_tab no longer explicitly
3101 initialized. Changed reg_init to const array of struct
3103 (ea): Local static array scale_tab now const.
3105 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
3108 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
3110 * configure.bat: the disassember needs to be enabled for
3111 "objdump -d" to work in djgpp.
3113 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3115 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
3116 (invalid_float): Enabled general version, doesn't require running
3117 on ns32k host. Changed to take char* argument, and test for
3118 explicitly specified sizes, instead of using sizeof() on host CPU
3120 (INVALID_FLOAT): Cast first argument.
3121 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
3122 list_P032, list_M032): Now const.
3123 (optlist, list_search): Made appropriate arguments now point to
3125 (print_insn_arg): Changed static array of one-character-string
3126 pointers into a static const array of characters; fixed sprintf
3127 statement accordingly.
3129 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
3131 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
3132 from distribution. A ns32k-dis.c from a previous distribution has
3133 been brought up to date and supports the new interface.
3135 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
3137 * configure.in: add bfd_ns32k_arch target support.
3139 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
3140 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
3142 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
3144 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
3147 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
3149 * h8300-dis.c, mips-dis.c: Don't use true and false.
3151 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
3153 * configure.in: Change --with-targets to --enable-targets.
3155 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
3157 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
3158 opcodes to the first instruction with that opcode, to speed
3159 disassembly of large files. From ralphc@pyramid.com (Ralph
3162 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3164 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
3166 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
3168 * configure.bat: update to latest makefile.in
3170 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
3172 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
3173 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
3174 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
3175 slot insn is in a delay slot.
3176 * z8k-opc.h: (resflg): Fix patterns.
3177 * h8500-opc.h Fix CR insn patterns.
3179 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3181 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
3182 "cmpl" before POWER versions, so that gas -many uses them.
3184 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
3186 * disassemble.c: New file.
3187 * Makefile.in (OFILES): Add disassemble.o.
3188 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
3189 * configure.in: Define ARCHDEFS in Makefile. Code taken from
3190 binutils/configure.in.
3192 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
3193 opcode being examined.
3195 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3197 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
3198 (insert_ral, insert_ram, insert_ras): New functions.
3199 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
3200 RAS for store with update.
3202 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3204 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3205 (edelsohn@npac.syr.edu).
3207 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3209 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3212 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3214 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3216 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3218 * ppc-opc.c (powerpc_operands): The signedp field has been
3219 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3220 instead. Add new operand SISIGNOPT.
3221 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3222 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3223 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3226 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3228 * i386-dis.c (struct private): Renamed to dis_private. `private'
3229 is a reserved word for dynix cc.
3231 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3233 * configure.in: Change error message to refer to bfd/config.bfd
3234 rather than bfd/configure.in.
3236 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3238 * ppc-opc.c: Define POWER2 as short alias flag.
3239 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3242 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3244 * i960-dis.c (print_insn_i960): Don't read a second word for
3245 opcodes 0, 1, 2 and 3.
3247 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3249 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3251 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3253 * m68881-ext.c: Removed; no longer used.
3254 * Makefile.in: Changed accordingly.
3256 * m68k-dis.c (ext_format_68881): Don't declare.
3257 (print_insn_m68k): If an instruction uses place 'i', it uses at
3258 least four fixed bytes.
3259 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3260 extended float, convert to double using floatformat_to_double, not
3261 ieee_extended_to_double, and fetch the data before converting it.
3263 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3265 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3266 davidj@ICSI.Berkeley.EDU (David Johnson).
3268 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3270 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3271 PowerPC uses bdnz[l][a].
3273 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3275 * dis-buf.c, i386-dis.c: Include sysdep.h.
3277 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3279 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3281 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3282 by Motorola PowerPC 601 with PPC_OPCODE_601.
3283 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3284 Disassemble Motorola PowerPC 601 instructions as well as normal
3285 PowerPC instructions.
3287 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3289 * i960-dis.c (reg, mem): Just use a static array instead of
3292 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3294 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3295 condition name index if this is for a negated condition.
3297 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3298 Floating point format for 'H' operand is backwards from normal
3299 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3300 operands (fmpyadd and fmpysub), handle bizarre register
3301 translation correctly for single precision format.
3303 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3304 or 'I' operands if the next format specifier is 'M' (fcmp
3305 condition completer).
3307 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3309 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3310 single number giving a bitmask for the MB and ME fields of an M
3311 form instruction. Change NB to accept 32, and turn it into 0;
3312 also turn 0 into 32 when disassembling. Seperated SH from NB.
3313 (insert_mbe, extract_mbe): New functions.
3314 (insert_nb, extract_nb): New functions.
3315 (SC_MASK): Mask out SA and LK bits.
3316 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3317 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3318 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3319 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3320 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3321 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3322 (powerpc_macros): Define table of macro definitions.
3323 (powerpc_num_macros): Define.
3325 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3326 if PPC_OPERAND_NEXT is set.
3328 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3330 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3331 char. Retrieve contents using bfd_getl32 instead of shifting.
3333 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3335 * ppc-opc.c: New file. Opcode table for PowerPC, including
3336 opcodes for POWER (RS/6000).
3337 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3338 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3339 (CFILES): Add ppc-dis.c.
3340 (ppc-dis.o, ppc-opc.o): New targets.
3341 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3343 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3345 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3346 No space before 'u', 'f', or 'N'.
3348 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3350 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3351 farther than we should.
3353 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3355 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3357 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3359 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3361 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3362 needs it, to prevent reading past the end of a section.
3364 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3366 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3367 Removed t,A case for la; always use t,A(b) case.
3369 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3371 From Ted Lemen <mellon@pepper.ncd.com>
3372 * mips-dis.c (print_insn_arg): Handle 'k'.
3373 * mips-opc.c: Make cache use k, not t.
3375 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3377 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3378 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3379 FLOAT_FORMAT_CODE to put out floating point register names.
3381 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3383 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3385 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3387 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3389 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3391 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3392 larger than 32. Moved dsxx32 variants first for disassembler.
3394 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3396 * z8kgen.c, z8k-opc.h: Add full lda information.
3398 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3400 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3401 movb instructions. Any necessary space will be emitted by
3402 the code to handle nullification completers.
3404 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3406 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3408 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3410 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3411 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3413 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3415 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3417 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3419 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3420 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3422 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3424 * m88k-dis.c (m88kdis): comment change. Remove space after
3426 (printop): handle new arg types DEC and XREG for m88110.
3428 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3430 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3431 type for absolute branch addresses. Delete special
3432 "ble" and "be" code in 'W' operand code.
3434 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3436 * mips-opc.c: Set hazard information correctly for branch
3437 likely instructions.
3439 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3441 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3442 info->fprintf_func for printing and info->print_address_func for
3445 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3447 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3449 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3451 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3452 Corrected second case of "b" for disassembler.
3454 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3456 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3457 to BFD swapping routines to correspond to BFD name changes.
3459 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3461 * mips-opc.c: Change div machine instruction to be z,s,t rather
3462 than s,t. Change div macro to be d,v,t rather than d,s,t.
3463 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3464 rem and remu which generates only the corresponding div
3465 instruction. This is for compatibility with the MIPS assembler,
3466 which only generates the simple machine instruction when an
3467 explicit destination of $0 is used.
3468 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3470 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3472 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3473 WR_31 hazard for bal, bgezal, bltzal.
3475 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3477 * hppa-dis.c (print_insn_hppa): Use print function
3478 from within the disassemble_info, not fprintf_filtered.
3480 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3482 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3483 Law, law@cs.utah.edu.)
3485 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3487 * mips-opc.c ("absu"): Removed.
3490 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3492 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3493 Changed hazard information to distinguish between memory load
3494 delays and coprocessor load delays.
3496 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3498 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3500 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3502 * configure.in: Don't pass cpu to config.bfd.
3504 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3506 * m88k-dis.c (m88kdis): Make class unsigned.
3508 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3510 * alpha-dis.c (print_insn_alpha): One branch format case was
3511 missing the instruction name.
3513 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3515 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3516 Add the arch-specific auxiliary files.
3517 (OFILES): Remove the arch-specific auxiliary files
3518 and use BFD_MACHINES instead of DIS_LIBS.
3519 * configure.in: Set BFD_MACHINES based on --with-targets option.
3521 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3523 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3526 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3528 * sparc-opc.c: Change CONST to const to deal with gcc
3529 -Dconst=__const -traditional.
3531 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3533 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3534 coprocessor instructions out of #if 0, and made them use new
3537 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3539 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3541 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3543 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3544 instruction, for use by the disassembler.
3546 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3547 hand-coded sign extensions that depended on 32-bit host ints.
3548 FIXME, we still depend on big-endian host bitfield ordering.
3549 (sparc_print_insn): Set the insn_info_valid field, and the
3550 other fields that describe the instruction being printed.
3552 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3554 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3555 `jmp' instead of just one of them.
3557 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3559 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3560 (fput_fp_reg_r): Renamed from fput_reg_r.
3561 (fput_fp_reg): New function.
3562 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3564 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3566 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3568 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3570 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3572 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3573 don't output a space.
3575 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3577 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3579 * mips-opc.c: New file, containing opcode table from
3580 ../include/opcode/mips.h.
3581 * Makefile.in: Add it.
3583 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3585 * m88k-dis.c: New file, moved in from gdb and changed to use the
3586 new dis-asm.h disassembler interface.
3587 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3588 (m88k-dis.o): New target.
3590 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3592 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3593 argument string const char * to correspond to opcode/mips.h.
3595 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3597 * mips-dis.c: Updated to account for name changes in new version
3599 * Makefile.in: Added header file dependencies.
3601 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3603 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3605 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3607 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3608 extend, rather than shifts.
3610 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3612 * Makefile.in: Undo 15 June change.
3614 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3616 * m68k-dis.c (print_insn_arg): Change return value to byte count
3618 * m68k-dis.c: Re-write to detect invalid operands before
3619 printing anything, so we can handle this the same way we
3620 handle invalid opcodes.
3622 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3624 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3626 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3628 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3631 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3633 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3635 * configure.in: Do make sysdep.h link.
3636 * Makefile.in: Search ../include. Don't search ../bfd.
3638 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3640 Changes from Jeff Law, law@cs.utah.edu:
3641 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3642 Do not print a space before the completers specified by
3645 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3647 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3648 defined, since gdb has been fixed.
3650 Changes from Jeff Law, law@cs.utah.edu:
3651 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3652 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3653 be a *disassemble_info, not a *FILE.
3654 * hppa-dis.c: Support 'd', '!', and 'a'.
3655 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3656 * hppa-dis.c: Delete cases which are no longer needed.
3658 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3660 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3662 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3664 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3667 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3669 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3670 * configure.in: No longer need to configure to get sysdep.h.
3672 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3674 * Patches from Jeffrey Law <law@cs.utah.edu>.
3675 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3676 templates for 1.1 FP computational instructions.
3678 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3680 * h8500-dis.c (print_insn_h8500): Address argument is type
3682 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3685 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3686 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3688 * sparc-dis.c (compare_opcodes): Move static declaration to
3691 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3693 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3694 instruction, remove unimp hack from 'l' argument.
3696 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3698 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3701 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3703 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3704 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3707 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3709 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3710 arrays of string pointers to 2-d arrays of chars, to save
3713 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3715 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3716 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3718 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3720 * hppa-dis.c: New file from Utah, adapted to new disassembler
3722 * Makefile.in: Include it.
3724 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3726 * sh-dis.c, sh-opc.h: New files.
3728 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3730 * alpha-dis.c, alpha-opc.h: New files.
3732 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3734 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3737 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3739 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3741 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3743 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3746 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3748 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3749 and double percent signs a few places.
3751 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3753 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3754 Use info->print_address_func not print_address.
3756 * dis-buf.c (generic_print_address): New function.
3758 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3760 * Makefile.in: Add sparc-dis.c.
3761 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3763 Add `add' instruction to the set that get checked
3764 for a preceding `sethi' in order to print an absolute address.
3765 * (print_insn): Disassembly prefers real instructions.
3766 (is_delayed_branch): Speed up.
3767 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3768 Still missing some float ops, and needs testing.
3769 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3770 F_ALIAS. Use printf, not fprintf, when not passing a file
3772 (compare_opcodes): Check that identical instructions have
3773 identical opcodes, complain otherwise.
3776 * Include reg_names.
3778 Use dis-asm.h/read_memory_func interface.
3780 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3782 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3783 deliberately return non-zero to setjmp from longjmp. Otherwise
3784 this code fails to compile.
3786 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3788 * m68k-dis.c: Fix prototype for fetch_arg().
3790 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3792 * dis-buf.c: New file, for new read_memory_func interface.
3793 Makefile.in (OFILES): Include it.
3794 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3795 Use new read_memory_func interface.
3797 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3799 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3800 * h8500-opc.h: Fix couple of opcodes.
3802 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3804 * Makefile.in: add dvi & installcheck targets
3806 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3808 * Makefile.in: Update for h8500-dis.c.
3810 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3812 * h8500-dis.c, h8500-opc.h: New files
3814 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3816 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3817 ../include/dis-asm.h.
3818 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3819 and ../gdb/m68k-pinsn.c).
3820 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3821 and ../gdb/i386-pinsn.c).
3822 * m68881-ext.c: New file. Moved definition of
3823 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3824 * Makefile.in: Adjust for new files.
3825 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3826 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3827 can be dis-assembled.
3829 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3831 * mips-dis.c (print_insn_arg): Now returns void.
3833 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3835 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3836 files that use the macros.
3838 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3840 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3841 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3842 (CFILES): Added mips-dis.c.
3844 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3846 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3847 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3849 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3851 * Makefile.in: Improve *clean rules.
3852 * configure.in: Allow a default host.
3854 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3856 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3857 files include other sysdep files
3859 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3861 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3863 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3865 * configure.in: For host support, use ../bfd/configure.host
3866 so it stays in sync with the ../bfd/hosts database.
3868 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3870 * configure.in: use cpu-vendor-os triple instead of nested cases
3872 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3874 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3875 *always* the wrong one.
3877 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3879 * z8kgen.c: added copyright info
3881 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3883 * z8k-dis.c (unparse_instr): prettier tabs
3884 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3886 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3888 * configure.in: Add ncr* configuration.
3889 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3890 picayune ANSI compilers happy.
3892 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3894 * configure.in (i386): Make i386 and i486 synonymous for now.
3895 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3897 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3899 * Makefile.in (install): Fix typo.
3901 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3903 * Makefile.in (make): Remove obsolete crud.
3904 (sparc-opc.o): Avoid Sun Make VPATH bug.
3906 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3908 * Makefile.in: since there are no SUBDIRS, remove rule and
3909 references of subdir_do.
3911 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3913 * Makefile.in (install): Get the library name right here too.
3914 Don't install bfd.h, since it's unrelated to this library. No
3915 subdirs to recurse into, either.
3916 (CFILES): The source file has a .c suffix, not .o.
3918 * sparc-opc.c: New file, moved from BFD.
3919 * Makefile.in (OFILES): Build it.
3921 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3923 * z8k-dis.c: fixed forward refferences of some declarations.
3925 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3927 * Makefile.in: get the name of the library right
3929 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3931 * z8k-dis.c: knows how to disassemble z8k stuff
3932 * z8k-opc.h: new file full of z8000 opcodes
3936 version-control: never