1 Sat Sep 18 11:36:12 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c: (print_insn_hppa): Handle 'fX'.
5 * hppa-dis.c: (print_insn_hppa): Add missing break after
8 * hppa-dis.c: Finish constifying various completers, register
11 1999-09-14 Michael Meissner <meissner@cygnus.com>
13 * configure.in (Canonicalization of target names): Remove adding
14 ${CONFIG_SHELL} in front of $ac_config_sub, since autoconfig 2.14
15 generates $ac_config_sub with a ${CONFIG_SHELL} already.
16 * configure: Regenerate.
18 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
20 * hppa-dis.c (print_insn_hppa): Escape '%' in output strings.
22 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
24 1999-09-07 Nick Clifton <nickc@cygnus.com>
26 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
27 names for the mulu and muls patterns.
29 1999-09-04 Steve Chamberlain <sac@pobox.com>
33 * disassemble.c (disassembler): Handle bfd_arch_pj.
34 * configure.in: Handle bfd_pj_arch.
35 * Makefile.am: Rebuild dependencies.
36 (CFILES): Add pj-dis.c and pj-opc.c.
37 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
38 * configure, Makefile.in: Rebuild.
40 1999-09-04 H.J. Lu <hjl@gnu.org>
42 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
44 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
46 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
48 1999-08-04 Doug Evans <devans@casey.cygnus.com>
50 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
51 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
52 * m32r-opinst.c: Rebuild.
54 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
56 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
59 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
61 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
62 extract_10U_store): New.
63 (print_insn_hppa): Add new completers.
65 * hppa-dis.c (signed_unsigned_names,mix_half_names,
66 saturation_names): New.
67 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
69 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
71 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
73 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
74 to decide to print a space.
76 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
78 * i386-dis.c: Add AMD athlon instruction support.
80 1999-08-10 Ian Lance Taylor <ian@zembu.com>
82 From Wally Iimura <iimura@microunity.com>:
83 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
84 overflow at end of address space.
85 (generic_print_address): Use sprintf_vma.
87 1999-08-08 Ian Lance Taylor <ian@zembu.com>
89 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
90 MKDEP. Rebuild dependencies.
91 * Makefile.in: Rebuild.
93 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
95 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
96 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
97 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
98 (print_insn_hppa): Add 64 bit condition completers.
100 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
102 * hppa-dis.c (print_insn_hppa): Change condition args to use
105 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
107 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
110 1999-07-21 Ian Lance Taylor <ian@zembu.com>
113 * configure.bat: Remove; obsolete.
115 1999-07-11 Ian Lance Taylor <ian@zembu.com>
117 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
118 (generic_strcat_address): Add cast to avoid warning.
119 * i386-dis.c: Initialize all structure fields to avoid warnings.
120 Add ATTRIBUTE_UNUSED as appropriate.
122 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
124 * sparc-dis.c (print_insn_sparc): Differentiate between
125 addition and oring when guessing symbol for comment.
127 1999-07-05 Nick Clifton <nickc@cygnus.com>
129 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
132 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
134 * i386-dis.c: Mention intel mode specials in macro char comment.
136 1999-06-21 Ian Lance Taylor <ian@zembu.com>
138 * alpha-dis.c: Don't include <stdlib.h>.
139 * arm-dis.c: Include "sysdep.h".
140 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
142 * Makefile.am: Rebuild dependencies.
143 * Makefile.in: Rebuild.
145 1999-06-16 Nick Clifton <nickc@cygnus.com>
147 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
150 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
152 * arm-dis.c (arm_regnames): Turn into a pointer to a register
154 (arm_regnames_standard): New variable: Array of ARM register
155 names according to ARM instruction set nomenclature.
156 (arm_regnames_apcs): New variable: Array of ARM register names
157 according to ARM Procedure Call Standard.
158 (arm_regnames_raw): New variable: Array of ARM register names
159 using just 'r' and the register number.
160 (arm_toggle_regnames): New function: Toggle the chosen register set
162 (parse_disassembler_options): New function: Parse any target
163 disassembler command line options.
164 (print_insn_big_arm): Call parse_disassembler_options if any
166 (print_insn_little_arm): Call parse_disassembler_options if any
169 1999-06-13 Ian Lance Taylor <ian@zembu.com>
171 * i386-dis.c (FWAIT_OPCODE): Define.
172 (used_prefixes): New static variable.
173 (fetch_data): Don't print an error message if we have already
174 fetched some bytes successfully.
175 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
176 (prefix_name): New static function.
177 (print_insn_i386): If setjmp fails, indicating a data error, but
178 we have managed to fetch some bytes, print the first one as a
179 prefix or a .byte pseudo-op. If fwait is followed by a non
180 floating point instruction, print the first prefix. Set
181 used_prefixes when prefixes are used. If any prefixes were not
182 used after disassembling the instruction, print the first prefix
183 instead of printing the instruction.
184 (putop): Set used_prefixes when prefixes are used.
185 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
186 (OP_DIR, OP_SIMD_Suffix): Likewise.
188 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
190 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
191 Support signx %reg, clruw %reg.
193 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
195 * sparc-opc.c: Add aliases Solaris as supports.
197 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
199 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
200 * Makefile.in: Regenerated.
202 1999-06-03 Philip Blundell <philb@gnu.org>
204 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
205 when target is PC-relative.
207 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
209 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
212 * m68k-dis.c (fetch_arg): Add places `n', `o'.
214 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
215 Add mcf5206e to appropriate instructions.
216 Add alias for MAC, MSAC.
218 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
221 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
222 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
224 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
226 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
228 * i386-dis.c (Ed): Define.
229 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
231 (OP_rm): Rename to OP_Rd.
234 (putop): Add const to template and p.
235 (print_insn_x86): Delete.
236 (print_insn_i386): Merge old function print_insn_x86. Add const
238 (struct dis386): Add const to name.
239 (dis386_att, dis386_intel): Add const.
240 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
241 (names32, names16, names8, names_seg, index16): Add const.
242 (grps, prefix_user_table, float_reg): Add const.
243 (float_mem_att, float_mem_intel): Add const.
244 (oappend): Add const to s.
245 (OP_REG): Add const to s.
246 (ptr_reg): Add const to s.
247 (dofloat): Add const to dp.
248 (OP_C): Don't skip modrm, it's now done in OP_Rd.
251 (OP_Rd): Check for valid mod. Call Op_E to print.
252 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
253 (OP_MS): Check for valid mod. Call Op_EM to print.
254 (OP_3DNowSuffix): Set obufp and use oappend rather than
255 strcat. Call BadOp() for errors.
256 (OP_SIMD_Suffix): Likewise.
257 (BadOp): New function.
259 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
261 * i386-dis.c (dis386_intel): Remove macro chars, except for
262 jEcxz. Change cWtR and cRtd to cW and cR.
263 (dis386_twobyte_intel): Remove macro chars here too.
264 (putop): Handle R and W macros for intel mode.
266 * i386-dis.c (SIMD_Fixup): New function.
267 (dis386_twobyte_att): Use it on movlps and movhps, and change
268 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
269 (dis386_twobyte_intel): Same here.
271 * i386-dis.c (Av): Remove.
275 (OP_SIMD_Suffix): New function.
276 (OP_DIR): Remove dead code.
277 (eAX_reg..eDI_reg): Renumber.
278 (onebyte_has_modrm): Table numbering comments.
279 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
280 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
281 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
282 and handle SIMD cmp insns in OP_SIMD_Suffix.
283 (info->bytes_per_line): Bump from 5 to 6.
285 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
286 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
288 PIII SIMD support from Doug Ledford <dledford@redhat.com>
289 * i386-dis.c (XM, EX, None): Define.
290 (OP_XMM, OP_EX, OP_None): New functions.
291 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
292 (GRP14): Rename to GRPAMD.
293 (GRP*): Add USE_GROUPS flag.
295 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
296 (twobyte_has_modrm): Add SIMD entries.
297 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
298 (grps): Add SIMD insns.
299 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
300 oappend repz if uses_f3_prefix. Add code to handle new groups for
303 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
304 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
305 operand from Av to Jv.
307 1999-05-07 Nick Clifton <nickc@cygnus.com>
309 * mcore-dis.c (print_insn_mcore): Use .short to display
310 unidentified instructions, not .word.
312 1999-04-26 Tom Tromey <tromey@cygnus.com>
314 * aclocal.m4, configure: Updated for new version of libtool.
316 1999-04-14 Doug Evans <devans@casey.cygnus.com>
318 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
319 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
321 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
323 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
326 1999-04-10 Doug Evans <devans@casey.cygnus.com>
328 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
329 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
331 1999-04-06 Ian Lance Taylor <ian@zembu.com>
333 * opintl.h (LC_MESSAGES): Never define.
335 1999-04-04 Ian Lance Taylor <ian@zembu.com>
337 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
338 (separator_char, scale_char): Likewise.
339 (print_insn_x86): Likewise.
340 (print_insn_i386): Likewise. Add declaration.
342 1999-03-26 Doug Evans <devans@casey.cygnus.com>
344 * fr30-dis.c: Rebuild.
345 * m32r-dis.c: Rebuild.
347 1999-03-23 Ian Lance Taylor <ian@zembu.com>
349 * m68k-opc.c: Change compare instructions to use "@s" rather than
350 ";s" when used with an immediate operand.
352 1999-03-22 Doug Evans <devans@casey.cygnus.com>
354 * cgen-opc.c (cgen_set_cpu): Delete.
355 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
356 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
358 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
360 * po/opcodes.pot: Rebuild.
362 1999-03-16 Martin Hunt <hunt@cygnus.com>
364 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
366 1999-03-11 Doug Evans <devans@casey.cygnus.com>
368 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
369 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
370 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
371 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
372 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
373 * m32r-opinst.c: Rebuild.
375 1999-02-25 Doug Evans <devans@casey.cygnus.com>
377 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
378 (cgen_hw_lookup_by_num): Rewrite.
379 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
380 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
381 * m32r-opinst.c: Rebuild.
383 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
385 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
386 (insert_jhint): Fix insertion mask.
387 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
389 1999-02-10 Doug Evans <devans@casey.cygnus.com>
391 * Makefile.in: Rebuild.
393 1999-02-09 Doug Evans <devans@casey.cygnus.com>
395 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
396 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
397 * Makefile.am: Remove references to them.
398 (HFILES): Add fr30-desc.h,m32r-desc.h.
399 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
401 (ALL_MACHINES): Update.
402 * configure.in: Redo handling of cgen_files.
403 (bfd_i960_arch): Delete i960c-*.lo files.
404 * configure: Regenerate.
405 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
406 (hash_insn_array): Rewrite.
407 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
408 (hash_insn_array): Rewrite.
409 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
410 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
411 (cgen_lookup_get_insn_operands): Ditto.
412 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
413 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
414 * po/POTFILES.in: Rebuild.
415 * po/opcodes.pot: Rebuild.
417 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
419 * Makefile.am: Rebuild dependencies.
420 (HFILES): Add fr30-opc.h.
421 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
422 * Makefile.in: Rebuild.
424 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
425 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
427 * acconfig.h: Remove.
428 * configure: Rebuild with current autoconf/automake.
429 * aclocal.m4: Likewise.
430 * config.in: Likewise.
431 * Makefile.in: Likewise.
433 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
435 * m68k-opc.c: Correct move (not movew) to status word on 5200.
437 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
439 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
440 * i386-dis.c (x_mode): Define.
444 (dis386_twobyte): Remove.
445 (dis386_twobyte_att): New.
446 (dis386_twobyte_intel): New.
447 (print_insn_x86): Use new arrays.
449 (float_mem_intel): New.
450 (float_mem_att): New.
451 (dofloat): Use new float_mem arrays.
452 (print_insn_i386_att): New.
453 (print_insn_i386_intel): New.
454 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
455 (putop): Handle intel syntax.
456 (OP_indirE): Handle intel syntax.
457 (OP_E): Handle intel syntax.
458 (OP_I): Handle intel syntax.
459 (OP_sI): Handle intel syntax.
460 (OP_OFF): Handle intel syntax.
464 1999-01-27 Doug Evans <devans@casey.cygnus.com>
466 * fr30-opc.h,fr30-opc.c: Rebuild.
467 * i960c-opc.h,i960c-opc.c: Rebuild.
468 * m32r-opc.c: Rebuild.
470 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
472 * hppa-dis.c: revert HP merge changes until HP gives us
475 1999-01-19 Nick Clifton <nickc@cygnus.com>
477 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
478 offsets as well as symbloic address.
480 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
482 * hppa-dis.c: fix comments and some indentation.
484 1999-01-12 Doug Evans <devans@casey.cygnus.com>
486 * fr30-opc.c,i960c-opc.c: Regenerate.
488 1999-01-11 Doug Evans <devans@casey.cygnus.com>
490 * fr30-opc.c: Regenerate.
492 1999-01-06 Doug Evans <devans@casey.cygnus.com>
494 * m32r-dis.c: Regenerate.
496 1999-01-05 Doug Evans <devans@casey.cygnus.com>
498 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
499 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
500 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
502 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
504 * configure.in: Require autoconf 2.12.1 or higher.
506 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
508 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
510 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
512 * fr30-opc.c: Regenerated.
514 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
516 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
518 1998-12-15 Dave Brolley <brolley@cygnus.com>
520 * fr30-opc.c,fr30-opc.h: Regenerated.
522 1998-12-14 Dave Brolley <brolley@cygnus.com>
524 * fr30-opc.c,fr30-opc.h: Regenerated.
526 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
528 * fr30-opc.c,fr30-opc.h: Regenerated.
530 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
532 * m32r-opc.c: Regenerate.
534 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
536 * dis-buf.c (generic_strcat_address): reformat to GNU coding
537 conventions. change sprintf call to an sprintf_vma call.
539 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
541 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
543 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
545 The following changes were made by
546 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
547 David Taylor <taylor@texas.cygnus.com>, and
548 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
549 merge in changes by HP; HP did not create ChangeLog entries.
551 * dis-buf.c (generic_strcat_address): new function.
553 * hppa-dis.c: Changes to improve hppa disassembly.
554 Changed formatting in : reg_names, fp_reg_names,control_reg,
555 New variables : sign_extension_names, deposit_names, conversion_names
556 float_test_names, compare_cond_names_double, add_cond_names_double,
557 logical_cond_names_double, unit_cond_names_double,
558 branch_push_pop_names, saturation_names, shift_names, mix_names,
559 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
560 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
561 (fput_const): renamed as fput_hex_const
563 - use the macros fputs_filtered and
564 fput_decimal_const whenever possible; calls to sign_extend require
565 2 params -- add a missing second param of 0.
566 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
567 architecture version number of current machine. HP folks are
568 trying to handle situation where the target program was compiled
569 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
571 - added new cases : 'g', 'B', 'm'
572 - added cases specifically for PA 2.0
573 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
574 - calls to fput_const become calls to fput_hex_const
576 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
578 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
579 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
580 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
581 * Makefile.in: Rebuilt.
582 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
584 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
585 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
587 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
589 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
591 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
593 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
595 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
596 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
598 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
600 * fr30-opc.c: Regenerate.
602 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
604 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
606 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
608 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
610 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
612 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
614 1998-11-30 Doug Evans <devans@casey.cygnus.com>
616 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
617 CGEN_INSN_BASE_VALUE.
618 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
619 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
621 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
623 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
625 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
627 * fr30-asm.c,fr30-dis.c: Regenerated.
629 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
631 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
633 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
635 * fr30-opc.c: Regenerated.
637 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
639 * fr30-opc.c: Regenerated.
640 * fr30-opc.h: Regenerated.
641 * fr30-dis.c: Regenerated.
642 * fr30-asm.c: Regenerated.
644 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
646 * mips-opc.c (sync.p,sync.l): Swap insn values.
648 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
650 * fr30-opc.c: Regenerate.
652 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
654 * fr30-opc.c: Regenerated.
655 * fr30-opc.h: Regenerated.
657 1998-11-18 Doug Evans <devans@casey.cygnus.com>
659 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
660 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
662 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
664 * fr30-opc.c: Regenerated.
666 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
668 * fr30-opc.c: Regenerated.
669 * fr30-opc.h: Regenerated.
670 * fr30-dis.c: Regenerated.
671 * fr30-asm.c: Regenerated.
673 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
675 * po/opcodes.pot: Regenerated.
676 * fr30-opc.c: Regenerated.
677 * fr30-opc.h: Regenerated.
678 * fr30-dis.c: Regenerated.
679 * fr30-asm.c: Regenerated.
681 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
683 * disassemble.c (disassembler): Add support for FR30 target.
685 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
687 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
688 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
690 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
692 * po/opcodes.pot: Regenerate.
693 * po/POTFILES.in: Regenerate.
694 * fr30-opc.c: Regenerate.
695 * fr30-opc.h: Regenerate.
697 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
699 * m32r-asm.c: Regenerate.
701 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
703 * configure.in: Added case for bfd_fr30_arch.
704 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
705 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
706 (CLEANFILES): Added stamp-fr30.
708 * fr30-asm.c: New file.
709 * fr30-dis.c: New file.
710 * fr30-opc.c: New file.
711 * fr30-opc.h: New file.
712 * po/POTFILES.in: Regenerated
713 * po/opcodes.pot: Regenerated
715 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
717 * configure.in: detect cygwin* instead of cygwin32*
718 * configure: regenerate
720 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
722 * mips-opc.c (IS_M): Added.
724 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
726 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
728 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
730 * m32r-opc.h,m32r-opc.c: Regenerate.
732 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
734 * i386-dis.c (OP_3DNowSuffix): New static function.
737 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
738 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
739 (insn_codep): New static variable.
740 (print_insn_x86): Init insn_codep after prefixes.
741 (grps): Add GRP14 entries for prefetch, prefetchw.
744 From Jeff B Epler <jepler@usgs.gov>
745 * i386-dis.c (Suffix3DNow): New table.
747 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
749 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
751 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
753 * d10v-dis.c (print_operand): If num is nonzero, then
754 add OPERAND_ACC1, not OPERAND_ACC0.
756 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
758 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
761 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
763 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
766 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
768 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
770 1998-09-09 Michael Meissner <meissner@cygnus.com>
772 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
775 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
777 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
779 (print_insn_little_arm): Detect Thumb symbols in elf object
782 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
784 * alpha-dis.c (print_insn_alpha): Use the machine type to
785 decide which PALcode set to include.
787 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
789 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
791 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
793 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
794 MSUB and MSUBS instructions.
796 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
798 * ppc-opc.c (powerpc_operands): Omit parens around additions in
801 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
803 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
804 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
805 +, -, and d for ColdFire.
807 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
808 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
809 (extract_mbe): Likewise.
811 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
813 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
815 * m10300-opc.c: First cut at UDF instructions.
817 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
819 * m32r-opc.c: Regenerate (remove semantic descriptions).
821 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
823 * arm-dis.c (print_insn_big_arm): Fix indentation.
824 (print_insn_little_arm): Likewise.
826 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
828 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
830 (print_insn_little_arm): Likewise.
832 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
834 Move all global state data into opcode table struct, and treat
835 opcode table as something that is "opened/closed".
836 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
837 (cgen_asm_init): Delete.
838 (cgen_set_parse_operand_fn): New function.
839 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
840 (cgen_dis_init): Delete.
841 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
842 (cgen_current_{opcode_table_mach,endian}): Delete.
843 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
845 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
847 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
850 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
852 * m10300-opc.c: Add entries for "no_match_operands" field in
855 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
857 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
859 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
861 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
863 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
865 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
867 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
869 (OP_J): Remove unnecessary subtraction when 16-bit displacement
870 will be masked later.
872 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
874 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
876 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
878 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
880 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
882 * m10300-dis.c: Only recognize instructions from the currently
884 * m10300-opc.c: Add field indicating the particular variant of
885 the mn10300 each instruction is available on.
887 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
889 * configure.in: For bfd_vax_arch, build vax-dis.lo.
890 * Makefile.am: Rebuild dependencies.
891 (CFILES): Add vax-dis.c.
892 (ALL_MACHINES): Add vax-dis.lo.
893 * aclocal.m4: Rebuild with current libtool.
894 * configure, Makefile.in: Rebuild.
896 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
898 * vax-dis.c: New file, from work by Pauline Middelink
899 <middelin@polyware.iaf.nl>.
900 * disassemble.c (ARCH_vax): Define if ARCH_all.
901 (disassembler): Add case for ARCH_vax.
902 * makefile.vms: Support compilation on vms/vax.
904 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
906 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
907 related to sign extension and the size of ints.
909 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
911 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
912 instructions. Support (sp) addressing mode by expanding it into
915 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
917 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
919 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
921 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
923 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
925 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
928 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
930 * mips-dis.c (print_insn_little_mips): Previously, instruction
931 printing references the symbol table to determine whether the
932 instruction resides in a block regular instructions or mips16
933 instructions. However, when the disassembler gets used in other
934 environments where the symbol table is not present, we no longer
935 rely in the symbol table, rather, use the low bit of the
936 instructions address to guess. There should be no change for usage
937 of the disassembler in host based programs, gdb, objdump.
938 (print_insn_big_mips): ditto.
939 (print_insn_mips): ditto
941 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
943 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
945 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
947 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
949 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
951 * i386-dis.c (index16): Add '%' to register names. Use ','
954 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
956 * i386-dis.c: Don't print opcode suffix when we can figure out the
957 size (and gas can!) by register operands, or from the default
959 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
961 (dis386, dis386_twobyte, grps): Use new suffix macros.
962 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
963 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
964 order of cmps operands to agree with Intel docs. Correct operand
965 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
966 agree with Intel docs.
967 (print_insn_x86): Print orphan fwait before other prefixes.
968 Return correct byte count for orphan fwait with prefixes. Don't
969 print `bound' operands in reverse order.
970 (ckprefix): Stop accumulating prefixes if we get fwait.
971 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
973 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
975 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
976 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
978 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
980 Fix problems when bfd_vma is wider than long.
981 * i386-dis.c: Make op_address and start_pc unsigned.
982 (set_op): Make parameter unsigned.
983 (print_insn_x86): Cast to bfd_vma when passing a value to
985 * ns32k-dis.c (CORE_ADDR): Don't define.
986 (print_insn_ns32k): Change type of addr to bfd_vma. Use
987 bfd_scan_vma to read back address.
988 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
990 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
991 (NEXTULONG): New definition.
992 (print_insn_m68k): Avoid overflow when computing third argument of
994 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
995 Use disp instead of val to store offset values.
996 (print_indexed): Use base_disp instead of word to store base
997 displacement, to avoid overflow.
998 * m10300-dis.c (disassemble): Cast value to long when computing
999 pc-relative address, to get correct sign extension.
1001 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
1003 * m32r-opc.c: Regenerate.
1005 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
1007 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
1008 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
1010 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
1012 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
1014 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1016 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
1018 (OP_DSreg): Rename from OP_DSSI.
1019 (OP_ESreg): Rename from OP_ESDI.
1020 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1022 (append_seg): Rename from append_prefix.
1023 (ptr_reg): New function.
1024 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1026 (PREFIX_ADDR): Rename from PREFIX_ADR.
1027 (float_reg): Add non-broken opcodes for people who don't want
1030 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1032 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1035 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1037 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1039 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1041 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1042 0; produce error message for shifts of size 32 (or 64 for 64-bit
1043 shifts), because the hardware doesn't support them.
1045 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1047 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1048 LONG_2, LONG_2b formats to use this new operand.
1050 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1052 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1054 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1056 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1057 endian data support.
1059 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1061 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1062 and SHORT_B3b formats to use Rb instead of Ra.
1064 Add FLAG_MUL16 to MUL2XH opcode.
1066 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1067 to existing 1.1.1 parallelisation prohibition procedure.
1069 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1071 * m32r-asm.c,m32r-dis.c: Regenerate.
1073 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1075 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1076 with a shift count of 0.
1078 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1080 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1081 (cgen_hw_lookup_by_num): New function.
1083 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1085 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1087 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1089 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1090 as big-endian on SPARClite.
1092 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1094 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1096 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1098 * po/Make-in (install-info): New target.
1100 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1102 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1103 * configure: Rebuild.
1105 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1107 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1108 variety of ISA2 instructions to set bottom ten bits of trap code.
1110 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1112 * Makefile.am (config.status): Add explicit target so that
1113 config.status depends upon bfd/configure.in.
1114 * Makefile.in: Rebuild.
1116 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1118 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1119 instructions to set bottom ten bits of break code.
1120 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1121 for above optional argument.
1123 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1125 * makefile.vms: Run dec c with /nodebug.
1127 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1129 * Makefile.in: Rebuilt.
1130 * Makefile.am: Regenerated dependencies with mkdep.
1132 * opintl.h (_): Define as dgettext.
1134 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1136 * cgen-asm.c: Internationalised.
1137 * m32r-asm.c: Internationalised.
1138 * m32r-dis.c: Internationalised.
1139 * m32r-opc.c: Internationalised.
1141 * aclocal.m4: Regenerated.
1142 * configure: Regenerated.
1143 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1144 * Makefile.in: Rebuild.
1145 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1146 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1148 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1150 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1152 * aclocal.m4, configure: Rebuild with current tools.
1154 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1156 * opintl.h: New file - contains internationalisation macros used
1157 by source files in this directory.
1158 * po/: New subdirectory - contains internationalisation files.
1159 * po/Make-in: New file - Makefile constructor.
1160 * po/POTFILES.in: New file - list of files in opcodes directory
1161 that should be scan for internationalisation macros.
1162 * po/opcodes.pot: New file - list of internationisation strings
1163 found in files mentioned in po/POTFILES.in.
1164 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1165 entry. Add intl directory to include paths.
1166 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1167 HAVE_STRCPY, HAVE_LC_MESSAGES
1168 * configure.in: Add rule to build Makefile in po subdirectory.
1169 * Makefile.in: Rebuilt.
1170 * aclocal.m4: Rebuilt.
1171 * config.in: Rebuilt.
1172 * configure: Rebuilt.
1173 * alpha-opc.c: Internationalised.
1174 * arc-dis.c: Internationalised.
1175 * arc-opc.c: Internationalised.
1176 * arm-dis.c: Internationalised.
1177 * cgen-asm.c: Internationalised.
1178 * d30v-dis.c: Internationalised.
1179 * dis-buf.c: Internationalised.
1180 * h8300-dis.c: Internationalised.
1181 * h8500-dis.c: Internationalised.
1182 * i386-dis.c: Internationalised.
1183 * m10200-dis.c: Internationalised.
1184 * m10300-dis.c: Internationalised.
1185 * m68k-dis.c: Internationalised.
1186 * m88k-dis.c: Internationalised.
1187 * mips-dis.c: Internationalised.
1188 * ns32k-dis.c: Internationalised.
1189 * opintl.h: Internationalised.
1190 * ppc-opc.c: Internationalised.
1191 * sparc-dis.c: Internationalised.
1192 * v850-dis.c: Internationalised.
1193 * v850-opc.c: Internationalised.
1195 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1197 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1198 (asm_hash_table_entries): New variable.
1199 (cgen_asm_init): Free asm_hash_table_entries.
1200 (hash_insn_array,hash_insn_list): New functions.
1201 (build_asm_hash_table): Use them. Hash macro insns as well.
1202 (cgen_asm_lookup_insn): Update.
1203 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1204 (dis_hash_table_entries): New variable.
1205 (cgen_dis_init): Free dis_hash_table_entries.
1206 (hash_insn_array,hash_insn_list): New functions.
1207 (build_dis_hash_table): Use them. Hash macro insns as well.
1208 (cgen_dis_lookup_insn): Update.
1209 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1210 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1211 (cgen_macro_insn_count): New function.
1212 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1214 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1216 * i386-dis.c (OP_DSSI): Print segment override.
1218 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1220 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1223 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1225 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1226 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1227 * configure.in: Define and substitute WIN32LDFLAGS and
1229 * aclocal.m4: Rebuild with new libtool.
1230 * configure, Makefile.in: Rebuild.
1232 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1234 * m32r-opc.c: Regenerate.
1236 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1238 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1239 before trying to copy it.
1240 * Makefile.in: Rebuild.
1242 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1244 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1246 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1248 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1249 from an arbitrary valid buffer instead of fetching them on demand
1251 (invalid_float): use bit_extract_simple() instead of bit_extract().
1253 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1255 From H.J. Lu <hjl@gnu.org>:
1256 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1259 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1261 * Branched binutils 2.9.
1263 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1265 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1266 disassembling last 4 bytes of a section.
1268 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1270 Fix some gcc -Wall warnings:
1271 * arc-dis.c (print_insn): Add casts to avoid warnings.
1272 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1273 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1274 * m10200-dis.c (disassemble): Likewise.
1275 * m10300-dis.c (disassemble): Likewise.
1276 * ns32k-dis.c (print_insn_ns32k): Likewise.
1277 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1278 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1279 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1280 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1281 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1282 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1283 * tic80-dis.c (print_one_instruction): Likewise.
1284 * w65-dis.c (print_operand): Likewise.
1285 * z8k-dis.c (fetch_data): Likewise.
1286 * a29k-dis.c: Add return type for find_byte_func_type.
1287 * arc-opc.c: Include <stdio.h>. Remove declarations of
1288 insert_multshift and extract_multshift.
1289 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1291 (extract_value): Fully parenthesize expression.
1292 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1293 * h8500-opc.h (h8500_table): Fully bracket initializer.
1294 * w65-opc.h (optable): Likewise.
1295 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1296 * i386-dis.c (OP_E): Initialize local variables.
1297 * m10200-dis.c (print_insn_mn10200): Likewise.
1298 * mips-dis.c (print_insn_mips16): Likewise.
1299 * sh-dis.c (print_insn_shx): Likewise.
1300 * v850-dis.c (print_insn_v850): Likewise.
1301 * ns32k-dis.c (print_insn_arg): Declare.
1302 (get_displacement, invalid_float): Declare.
1303 (list_search, sign_extend, flip_bytes): Declare return type.
1304 (get_displacement): Likewise.
1305 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1307 (print_insn_ns32k): Make i unsigned.
1308 (invalid_float): Make static. Declare type of val.
1309 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1310 on each for iteration.
1311 * tic30-dis.c (get_indirect_operand): Likewise.
1312 * z8k-dis.c (print_insn_z8001): Declare return type.
1313 (print_insn_z8002): Likewise.
1314 (unparse_instr): Fix sprintf format strings.
1316 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1318 * mips-opc.c: Add "sync.l" and "sync.p".
1320 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1322 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1323 default m68k variant to recognize.
1325 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1326 (ctrl, cobr, mem, ea): Likewise.
1327 (print_addr): Likewise. Remove cast.
1328 (ea): Cast argument of print_addr to bfd_vma.
1330 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1332 (cgen_parse_unsigned_integer): Likewise.
1333 (cgen_parse_address): Likewise.
1335 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1337 * i960-dis.c (ctrl): Add full braces to structure initialization.
1338 (cobr, mem, reg): Likewise.
1339 (ea): Correct parenthesization in expression.
1341 * cgen-asm.c: Include <ctype.h>.
1342 (build_asm_hash_table): Remove unused local variable i.
1343 (cgen_parse_keyword): Add casts to avoid warnings.
1345 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1346 symbol. Fix indentation.
1347 (print_insn_little_arm): Likewise.
1349 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1351 * configure.in: Use AM_DISABLE_SHARED.
1352 * aclocal.m4, configure: Rebuild with libtool 1.2.
1354 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1356 These patches are courtesy of Jonathan Walton and Tony Thompson
1357 (athompso@cambridge.arm.com).
1359 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1362 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1363 both the offset and the label closest to the destination.
1365 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1367 * m32r-opc.h: Regenerate.
1369 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1371 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1373 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1375 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1376 assume that info->symbols is non-empty.
1378 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1380 * alpha-opc.c (cvtqs) There is no such thing.
1381 (cvttq): Missing most of the /*d variants.
1383 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1385 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1386 delayed branches or jumps.
1388 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1390 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1392 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1393 * tic30-dis.c (print_branch): Likewise.
1395 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1397 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1398 saved_symbol code as it is no longer needed.
1400 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1402 * cgen-asm.c: Include symcat.h.
1403 * cgen-dis.c,cgen-opc.c: Ditto.
1404 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1406 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1408 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1410 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1412 * m32r-opc.[ch]: Regenerate.
1414 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1416 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1417 arguments. Don't perform validation here.
1418 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1420 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1422 * m32r-opc.c: Regenerate.
1424 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1426 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1427 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1429 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1431 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1433 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1435 * configure.in: Get the version number from BFD.
1436 * configure: Rebuild.
1438 From H.J. Lu <hjl@gnu.org>:
1439 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1440 * Makefile.in: Rebuild.
1442 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1444 * m32r-opc.c: Regenerate.
1445 * m32r-opc.h: Regenerate.
1447 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1449 * m32r-opc.c: Regenerate.
1451 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1453 Fix rac to accept only a0:
1454 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1455 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1456 Introduce OPERAND_GPR.
1457 * d10v-dis.c (print_operand): Likewise.
1459 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1461 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1462 (cgen_hw_lookup): Make result const.
1463 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1465 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1467 * configure, aclocal.m4: Rebuild with new libtool.
1469 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1471 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1472 instructions use a PC relative branch, not absolute.
1474 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1476 * configure.in: Set libtool_enable_shared rather than
1477 libtool_shared. Remove diversion hack.
1478 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1480 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1482 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1483 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1485 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1487 * tic30-dis.c: New file.
1488 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1489 * configure.in: Handle bfd_tic30_arch.
1490 * Makefile.am: Rebuild dependencies.
1491 (CFILES): Add tic30-dis.c
1492 (ALL_MACHINES): Add tic30-dis.lo.
1493 * configure, Makefile.in: Rebuild.
1495 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1497 * m32r-opc.h (HAVE_CPU_M32R): Define.
1499 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1501 * v850-opc.c (insertion routines): If both alignment and size is
1502 wrong then report this.
1504 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1506 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1507 Only recognize instructions for the current target_processor.
1509 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1511 * d10v-dis.c (PC_MASK): Correct value.
1512 (print_operand): If there's a reloc, don't calculate the
1513 address because they could be in different sections.
1515 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1517 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1518 instruction after the 4650's "mul" instruction; nobody's using the
1519 4010 these days. If object files someday indicate which processor
1520 variant they're intended for, we can do a better job at this.
1522 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1524 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1525 table provided entry size. Use CGEN_INSN_MNEMONIC.
1526 (cgen_parse_keyword): Rewrite.
1527 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1528 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1529 * cgen-opc.c: Clean up pass over `struct foo' usage.
1530 (cgen_keyword_lookup_value): Handle "" entry.
1531 (cgen_keyword_add): Likewise.
1533 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1535 * mips-opc.c: Add FP_D to s.d instruction flags.
1537 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1539 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1541 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1543 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1544 PC relative offset forms before the 15 bit forms. An assembler command
1545 line option now chooses the default.
1547 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1549 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1550 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1552 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1554 * configure: Only build libopcodes shared if --enable-shared's value
1555 was `yes', or was set to `*opcodes*'.
1556 * aclocal.m4: Likewise.
1557 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1558 original source of this bit of code. It's not clear what the best fix
1561 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1563 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1564 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1565 offset forms before the 15 bit forms, to default to the long forms.
1567 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1569 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1571 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1573 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1574 symbol if none is present.
1575 (print_insn_big_arm): Prevent examination of stored symbol if
1578 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1580 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1582 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1584 * disassemble.c: Remove disasm_symaddr() function.
1586 * arm-dis.c: Use info->symbol instead of info->flags to determine
1587 if disassmbly should be in Thumb or Arm mode.
1589 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1591 * arm-dis.c: Add support for disassembling Thumb opcodes.
1592 (print_insn_thumb): New function.
1594 * disassemble.c (disasm_symaddr): New function.
1596 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1597 (thumb_opcodes): Table of Thumb opcodes.
1599 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1601 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1603 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1604 and 'v' as operand types.
1606 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1608 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1609 <olivier.carmona@di.epfl.ch>.
1610 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1611 which has a two word opcode with a one word argument.
1613 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1615 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1616 unsigned, not signed.
1617 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1619 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1621 * d10v-dis.c (print_operand):
1622 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1624 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1626 * d10v-opc.c (OPERAND_FLAG): Split into:
1627 (OPERAND_FFLAG, OPERAND_CFLAG) .
1631 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1633 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1634 field for all INSN_MACRO's.
1635 * mips16-opc.c: same
1637 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1639 * mips-opc.c (sync,cache): These are 3900 insns.
1641 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1643 sh-opc.h (sh_table): Remove ftst/nan.
1645 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1647 * mips-opc.c (ffc, ffs): Fix mask.
1649 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1651 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1654 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1656 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1657 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1659 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1661 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1662 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1664 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1666 * v850-dis.c (disassemble): Replace // with /* ... */
1668 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1670 * sparc-opc.c: Add wr & rd for v9a asr's.
1671 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1672 (v9a_asr_reg_names): New variable.
1673 Patch from David Miller <davem@vger.rutgers.edu>.
1675 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1677 * sparc-opc.c (v9notv9a): New insn type.
1678 (IMPDEP): Move to the end to not conflict with edge8 et al.
1679 Patch from David Miller <davem@vger.rutgers.edu>.
1681 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1683 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1685 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1687 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1689 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1691 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1692 of disassemble_info structure to determine if an overlay address
1693 has a matching symbol in low memory.
1695 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1696 new symbol_at_address_func field in disassemble_info structure.
1698 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1700 * v850-opc.c (extract_d22): Use signed arithmatic.
1702 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1704 * mips-opc.c: Three op mult is not an ISA insn.
1706 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1708 * mips-opc.c: Fix formatting.
1710 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1712 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1713 than assuming that char is signed. Explicitly sign extend 16 bit
1714 values, rather than assuming that short is 16 bits.
1715 (OP_sI, OP_J, OP_DIR): Likewise.
1717 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1719 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1722 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1724 * v850-opc.c: Fix typo in comment.
1726 * v850-dis.c (disassemble): Add test of processor type when
1727 determining opcodes.
1729 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1731 * configure.in: Use a diversion to set enable_shared before the
1732 arguments are parsed.
1733 * configure: Rebuild.
1735 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1737 * m68k-opc.c (TBL1): Use ! rather than `.
1738 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1740 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1742 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1744 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1746 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1749 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1750 * aclocal.m4: Rebuild with new libtool.
1751 * configure: Rebuild.
1753 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1755 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1757 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1759 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1761 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1763 * v850-opc.c (v850_opcodes): Further rearrangements.
1765 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1767 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1769 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1771 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1774 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1776 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1778 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1780 * v850-opc.c: Initialise processors field of v850_opcode structure.
1782 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1784 Merge changes from Martin Hunt:
1786 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1788 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1789 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1790 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1792 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1794 * d30v-dis.c (print_insn): First operand of d*i (delayed
1795 branch) instructions is relative.
1797 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1798 (d30v_operand_table): Add IMM6S3 type.
1799 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1801 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1802 and cmp instructions.
1804 * d30v-opc.c: Correct entries for repeat*, and sat*.
1805 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1806 types. Correct several formats.
1808 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1810 * d30v-opc.c (pre_defined_registers): Change control registers.
1812 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1813 SHORT_C2. Manual was incorrect.
1815 * d30v-dis.c (lookup_opcode): Return value now indicates
1816 if an opcode has a short and a long form. Used for deciding
1817 to append a ".s" or ".l".
1818 (print_insn): Append a ".s" to an instruction if it is
1819 the short form and ".l" if it is a long form. Do not append
1820 anything if the instruction has only one possible size.
1822 * d30v-opc.c: Change mulx2h to require an even register.
1823 New form: SHORT_A2; a SHORT_A form that needs an even
1824 register as the first operand.
1826 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1827 instruction was not being disassembled if there were an odd
1828 number of instructions.
1830 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1832 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1834 * v850-dis.c (disassemble): Improved display of register lists.
1836 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1838 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1839 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1840 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1841 fandnot1s, fandnot2s.
1843 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1845 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1847 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1849 * cgen-asm.c (cgen_parse_address): New argument resultp.
1850 All callers updated.
1851 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1853 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1855 * mn10200-dis.c (disassemble): PC relative instructions are
1856 relative to the next instruction, not the current instruction.
1858 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1860 * v850-dis.c (disassemble): Only signed extend values that are not
1861 returned by extract functions.
1862 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1864 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1866 * v850-opc.c: Update comments. Remove use of
1867 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1869 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1871 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1873 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1875 * configure: Rebuilt with latest devo autoconf for NT support.
1877 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1879 * v850-dis.c (disassemble): Use curly brace syntax for register
1882 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1883 where r0 is being used as a destination register.
1885 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1887 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1889 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1891 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1893 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1895 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1896 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1899 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1901 * configure (cgen_files): Add support for v850e target.
1902 * configure.in (cgen_files): Add support for v850e target.
1904 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1906 * configure (cgen_files): Add support for v850ea target.
1907 * configure.in (cgen_files): Add support for v850ea target.
1909 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1911 * configure.in (bfd_arc_arch): Add.
1912 * configure: Rebuild.
1913 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1914 * Makefile.in: Rebuild.
1915 * arc-dis.c, arc-opc.c: New files.
1916 * disassemble.c (ARCH_all): Define ARCH_arc.
1917 (disassembler): Add ARC support.
1919 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1921 * v850-dis.c (disassemble): Add support for v850EA instructions.
1923 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1924 (v850_opcodes): Add v850EA instructions.
1926 * v850-dis.c (disassemble): Add support for v850E instructions.
1928 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1929 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1930 insert_spe, extract_spe): New Functions.
1931 (v850_opcodes): Add v850E instructions.
1933 * v850-opc.c: Reorganised and re-layed out to improve readability
1936 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1938 * configure: Rebuild with autoconf 2.12.1.
1940 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1942 * aclocal.m4, configure: Rebuild with new automake patches.
1944 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1946 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1947 * acinclude.m4: Just include acinclude.m4 from BFD.
1948 * aclocal.m4, configure: Rebuild.
1950 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1952 * Makefile.am: New file, based on old Makefile.in.
1953 * acconfig.h: New file.
1954 * acinclude.m4: New file.
1955 * stamp-h.in: New file.
1956 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1957 Removed shared library handling; now handled by libtool. Replace
1958 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1959 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1960 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1961 handling in AC_OUTPUT.
1962 * dep-in.sed: Change .o to .lo.
1963 * Makefile.in: Now built with automake.
1964 * aclocal.m4: Now built with aclocal.
1965 * config.in, configure: Rebuild.
1967 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1969 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1971 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1973 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1975 * sparc-dis.c (sorted_opcodes): New static local.
1976 (struct opcode_hash): `opcode' is pointer to const element.
1977 (build_hash): First arg is now table of sorted pointers.
1978 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1979 (compare_opcodes): Update.
1981 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1983 * cgen-opc.c: #include <ctype.h>.
1984 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1985 Handle case insensitive hashing.
1986 (hash_keyword_value): Change type of `value' to unsigned int.
1988 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1990 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1991 precision FP, mark it as such. Likewise for double precision
1992 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1995 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1997 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1999 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2000 nesting depth when all the macros are expanded.
2002 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2004 * sparc-opc.c: The fcmp v9a instructions take an integer register
2005 as a destination, not a floating point register. From Christian
2006 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2008 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2010 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2011 syntax. From Roman Hodek
2012 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2014 * i386-dis.c (twobyte_has_modrm): Fix pand.
2016 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2018 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2020 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2022 * arm-dis.c: Add prototypes for arm_decode_shift and
2025 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2027 * mips-opc.c: Add r3900 insns.
2029 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2031 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2032 print delay slot instructions on the same line. When using a PC
2033 relative load, add a comment with the value being loaded if it can
2036 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2038 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2039 to pushS/popS for segment regs and byte constant so that
2040 pushw/popw printed when in 16 bit data mode.
2042 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2043 print cbtw, cwtd in 16 bit data mode.
2044 * i386-dis.c (putop): extra case W to support above.
2046 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2047 address size prefix in 16 bit address mode.
2049 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2051 * sh-dis.c: Reindent. Rename local variable fprintf to
2054 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2056 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2058 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2060 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2062 * mips16-opc.c (mip16_opcodes): same.
2064 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2066 * m68k-opc.c (moveb): Change $d to %d.
2068 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2070 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2071 (twobyte_has_modrm): Likewise.
2073 (OP_MMX, OP_EM, OP_MS): New static functions.
2075 * i386-dis.c: Revert patch of April 4. The output now matches
2078 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2080 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2083 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2085 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2087 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2089 * Makefile.in (install): Depend upon installdirs.
2090 (installdirs): New target.
2092 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2094 From Thomas Graichen <graichen@rzpd.de>:
2095 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2096 * configure: Rebuild.
2098 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2100 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2101 Delete string{,s}.h support.
2103 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2105 * cgen-asm.c (cgen_parse_operand_fn): New global.
2106 (cgen_parse_{{,un}signed_integer,address}): Update call to
2107 cgen_parse_operand_fn.
2108 (cgen_init_parse_operand): New function.
2109 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2110 from cgen_asm_init_parse.
2111 (m32r_cgen_assemble_insn): New operand `errmsg'.
2112 Delete call to as_bad, return error message to caller.
2113 (m32r_cgen_asm_hash_keywords): #if 0 out.
2115 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2117 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2119 [case 'J']: Fix typo in register name.
2121 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2123 * configure.in: Substitute SHLIB_LIBS.
2124 * configure: Rebuild.
2125 * Makefile.in (SHLIB_LIBS): New variable.
2126 ($(SHLIB)): Use $(SHLIB_LIBS).
2128 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2130 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2132 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2134 * disassemble.c (disassembler): Handle m32r.
2136 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2138 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2139 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2140 * Makefile.in (CFILES): Add them.
2141 (ALL_MACHINES): Add them.
2142 (dependencies): Regenerate.
2143 * configure.in (cgen_files): New variable.
2144 (bfd_m32r_arch): Add entry.
2145 * configure: Regenerate.
2147 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2149 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2150 * configure: Rebuild.
2152 * Makefile.in: Rebuild dependencies.
2154 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2156 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2159 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2161 * Branched binutils 2.8.
2163 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2165 * m10200-dis.c: Rename from mn10200-dis.c.
2166 * m10200-opc.c: Rename from mn10200-opc.c.
2167 * m10300-dis.c: Rename from mn10300-dis.c
2168 * m10300-opc.c: Rename from mn10300-opc.c.
2169 * Makefile.in: Update accordingly.
2171 * mips16-opc.c: Add mul and dmul macros.
2173 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2175 * makefile.vms: Update CFLAGS, add clean target.
2177 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2179 * mips-opc.c: Add "wait". From Ralf Baechle
2180 <ralf@gnu.ai.mit.edu>.
2182 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2183 * configure, config.in: Rebuild.
2184 * sysdep.h: Include <stdlib.h> if it exists.
2185 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2187 * Makefile.in: Rebuild dependencies.
2189 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2191 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2192 Andrew Bray <andy@madhouse.demon.co.uk>.
2194 * mips-opc.c: Add cast when setting mips_opcodes.
2196 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2198 * v850-dis.c (disassemble): Fix sign extension problem.
2199 * v850-opc.c (extract_d*): Fix sign extension problems to make
2200 disassembly calculate branch offsets correctly.
2202 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2204 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2206 * mips-opc.c: Add dctr and dctw.
2208 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2210 * d30v-dis.c (print_insn): Change the way signed constants
2213 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2215 * Makefile.in (BFD_H): New variable.
2216 (HFILES): New variable.
2217 (CFILES): Add all C files.
2218 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2219 Delete old dependencies, and build new ones.
2220 * dep-in.sed: New file.
2222 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2224 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2226 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2228 * mn10200-opc.c: Change "trap" to "syscall".
2229 * mn10300-opc.c: Add new "syscall" instruction.
2231 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2233 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2234 mulul insns on the coldfire.
2236 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2238 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2239 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2240 (print_insn_little_arm): Likewise.
2242 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2244 Based on patches from H.J. Lu <hjl@lucon.org>:
2245 * i386-dis.c (fetch_data): Add prototype.
2246 * m68k-dis.c (fetch_data): Add prototype.
2247 (dummy_print_address): Add prototype. Make static.
2248 * ppc-opc.c (valid_bo): Add prototype.
2249 * sparc-dis.c (build_hash_table): Add prototype.
2250 (is_delayed_branch, compute_arch_mask): Add prototypes.
2251 (print_insn_sparc): Make several local variables const.
2252 (compare_opcodes): Change arguments to const PTR. Add prototype.
2253 * sparc-opc.c (arg): Change name field to be const.
2254 (lookup_name, lookup_value): Add prototypes. Change table and
2255 name parameters to be const.
2256 (sparc_encode_asi): Change name parameter to be const.
2257 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2258 (sparc_encode_sparclet_cpreg): Likewise.
2259 (sparc_decode_asi): Change return type to be const.
2260 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2261 (sparc_decode_sparclet_cpreg): Likewise.
2263 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2265 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2266 Solaris doesn't like the combined options, and the -f is
2268 (stamp-tshlink, install): Likewise.
2270 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2272 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2275 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2277 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2279 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2281 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2284 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2286 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2288 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2290 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2292 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2294 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2296 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2298 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2299 floatformat_to_double to make portable.
2300 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2303 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2305 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2306 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2308 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2310 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2311 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2313 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2315 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2316 (OFF_SL_BR_SCALED): ... to this, and added the flag
2317 TIC80_OPERAND_BASEREL to the flags word.
2318 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2321 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2323 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2324 Change mips_opcodes from const array to a pointer,
2325 and change bfd_mips_num_opcodes from const int to int,
2326 so that we can increase the size of the mips opcodes table
2329 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2331 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2332 store BITNUM values in the table in one's complement form
2333 to match behavior when assembler is given a raw numeric
2334 value for a BITNUM operand.
2335 * tic80-dis.c (print_operand_bitnum): Ditto.
2337 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2339 * d30v-opc.c: Removed references to FLAG_X.
2341 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2343 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2345 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2347 * Makefile.in: Added d30v object files.
2348 * configure: (bfd_d30v_arch) Rebuilt.
2349 * configure.in: (bfd_d30v_arch) Added new case.
2350 * d30v-dis.c: New file.
2351 * d30v-opc.c: New file.
2352 * disassemble.c (disassembler) Add entry for d30v.
2354 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2356 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2357 representations for the floating point BITNUM values.
2359 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2361 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2362 in the table in one's complement form, as they appear in the
2364 (tic80_symbol_to_value): Use macros to access predefined
2366 (tic80_value_to_symbol): Ditto.
2367 (tic80_next_predefined_symbol): New function.
2368 * tic80-dis.c (print_operand_bitnum): Remove code that did
2369 one's complement for BITNUM values.
2371 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2373 * makefile.vms: Remove 8 bit characters. Update to latest
2376 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2378 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2380 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2382 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2383 (IMM24_PCREL): Likewise.
2385 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2387 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2388 address for an extended PC relative instruction that is not a
2391 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2393 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2396 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2398 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2399 (tic80_opcodes): Sort entries so that long immediate forms
2400 come after short immediate forms, making it easier for
2401 assembler to select the right one for a given operand.
2403 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2405 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2407 (print_insn_mips16): Likewise.
2409 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2411 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2412 a symbol class that restricts translation to just that
2413 class (general register, condition code, etc).
2415 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2417 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2418 and REG_DEST_E for register operands that have to be
2419 an even numbered register. Add REG_FPA for operands that
2420 are one of the floating point accumulator registers.
2421 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2422 (tic80_opcodes): Change entries that need even numbered
2423 register operands to use the new operand table entries.
2424 Add "or" entries that are identical to "or.tt" entries.
2426 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2428 * mips16-opc.c: Add new cases of exit instruction for
2430 * mips-dis.c (print_mips16_insn_arg): Display floating point
2431 registers in operands of exit instruction. Print `$' before
2432 register names in operands of entry and exit instructions.
2434 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2436 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2437 pairs for all predefined symbols recognized by the assembler.
2438 Also used by the disassembling routines.
2439 (tic80_symbol_to_value): New function.
2440 (tic80_value_to_symbol): New function.
2441 * tic80-dis.c (print_operand_control_register,
2442 print_operand_condition_code, print_operand_bitnum):
2443 Remove private tables and use tic80_value_to_symbol function.
2445 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2447 * d10v-dis.c (print_operand): Change address printing
2448 to correctly handle PC wrapping. Fixes PR11490.
2450 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2452 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2455 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2457 * mips-dis.c (print_insn_mips16): Set insn_info information.
2458 (print_mips16_insn_arg): Likewise.
2460 * mips-dis.c (print_insn_mips16): Better handling of an extend
2461 opcode followed by an instruction which can not be extended.
2463 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2465 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2466 coldfire moveb instruction to not allow an address register as
2467 destination. Although the documentation does not indicate that
2468 this is invalid, experiments uncovered unexpected behavior.
2469 Added a comment explaining the situation. Thanks to Andreas
2470 Schwab for pointing this out to me.
2472 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2474 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2475 entries are presorted so that entries with the same mnemonic are
2476 adjacent to each other in the table. Sort the entries for each
2477 instruction so that this is true.
2479 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2481 * m68k-dis.c: Include <libiberty.h>.
2482 (print_insn_m68k): Sort the opcode table on the most significant
2483 nibble of the opcode.
2485 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2487 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2488 "vsub", "vst", "xnor", and "xor" instructions.
2489 (V_a1): Renamed from V_a, msb of accumulator reg number.
2490 (V_a0): Add macro, lsb of accumulator reg number.
2492 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2494 * tic80-dis.c (print_insn_tic80): Broke excessively long
2495 function up into several smaller ones and arranged for
2496 the instruction printing function to be callable recursively
2497 to print vector instructions that have both a load and a
2498 math instruction packed into a single opcode.
2499 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2500 to explain why it comes after the other vector opcodes.
2502 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2504 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2505 move insns to handle immediate operands.
2507 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2509 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2510 fix operand mask in the "moveml" entries for the coldfire.
2512 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2514 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2515 New macros for building vector instruction opcodes.
2516 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2517 FMT_LI, which were unused. The field is now a flags field.
2518 Remove some opcodes that are possible, but illegal, such
2519 as long immediate instructions with doubles for immediate
2520 values. Add "vadd" and "vld" instructions.
2522 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2524 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2525 the order more logical. Move the shift alias instructions ("rotl",
2526 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2527 interspersed with the regular sr.x and sl.x instructions. Add
2528 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2529 "sub", "subu", "swcr", and "trap".
2531 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2533 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2534 (OFF_SL_PC): Renamed from OFF_SL.
2535 (OFF_SS_BR): New operand type for base relative operand.
2536 (OFF_SL_BR): New operand type for base relative operand.
2537 (REG_BASE): New operand type for base register operand.
2538 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2539 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2540 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2542 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2543 10 char field, padded with spaces on rhs, rather than a string
2544 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2545 than old TIC80_OPERAND_RELATIVE. Add support for new
2546 TIC80_OPERAND_BASEREL flag bit.
2548 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2550 * tic80-dis.c (print_insn_tic80): Print floating point operands
2552 * tic80-opc.c (SPFI): Add single precision floating point
2553 immediate operand type.
2554 (ROTATE): Add rotate operand type for shifts.
2555 (ENDMASK): Add for shifts.
2556 (n): Macro for the 'n' bit.
2557 (i): Macro for the 'i' bit.
2558 (PD): Macro for the 'PD' field.
2559 (P2): Macro for the 'P2' field.
2560 (P1): Macro for the 'P1' field.
2561 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2564 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2566 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2567 adding in current address for pc-relative operands.
2569 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2571 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2572 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2573 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2574 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2575 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2576 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2577 (REG_SCALED, LSI_SCALED): New operand types.
2578 (E): New macro for 'E' bit at bit 27.
2579 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2580 opcodes, including the various size flavors (b,h,w,d) for
2581 the direct load and store instructions.
2583 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2585 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2587 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2588 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2589 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2590 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2591 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2592 masks with "MASK_* & ~M_*" to get the M bit reset.
2593 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2595 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2597 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2598 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2599 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2601 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2602 CC, SICR, and LICR table entries.
2603 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2604 "bcnd", and "brcr" opcodes.
2606 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2608 * ppc-opc.c (powerpc_operands): Make comment match the
2609 actual fields (no shift field).
2610 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2611 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2612 partial implementation, work in progress.
2613 * tic80-opc.c (tic80_operands): Begin construction operands table.
2614 (tic80_opcodes): Continue populating opcodes table and start
2615 filling in the operand indices.
2616 (tic80_num_opcodes): Add this.
2618 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2620 * m68k-opc.c: Add #B case for moveq.
2622 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2624 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2625 before they are used.
2627 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2629 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2630 for "breakpoint" instruction.
2632 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2634 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2635 (dep): Use ALL_CFLAGS rather than CFLAGS.
2637 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2639 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2642 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2644 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2645 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2647 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2649 * mips16-opc.c: Add "abs".
2651 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2653 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2654 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2655 (disassembler): Add bfd_arch_tic80 support to set disassemble
2656 to print_insn_tic80.
2657 * tic80-dis.c (print_insn_tic80): Add stub.
2659 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2661 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2662 * configure: Regenerate with autoconf.
2663 * tic80-dis.c: Add file.
2664 * tic80-opc.c: Add file.
2666 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2668 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2670 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2672 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2673 (mn10200_opcodes): Use it for some logicals and btst insns.
2674 Add "break" and "trap" instructions.
2676 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2678 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2680 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2682 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2683 relative load or add now depends upon whether the instruction is
2686 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2688 * mn10200-dis.c: Finish writing disassembler.
2689 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2690 Fix mask for "jmp (an)".
2692 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2693 handle endianness issues for mn10300.
2695 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2697 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2699 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2700 instruction. Fix opcode field for "movb (imm24),dn".
2702 * mn10200-opc.c (mn10200_operands): Fix insertion position
2705 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2707 * mn10200-opc.c: Create mn10200 opcode table.
2708 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2709 but moving along nicely.
2711 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2713 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2715 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2717 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2718 specifiers for fmovem* instructions.
2720 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2722 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2724 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2726 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2729 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2731 * mn10300-opc.c: Add some comments explaining the various
2734 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2736 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2738 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2741 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2742 operand specifiers in fmovm* instructions.
2744 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2746 * ppc-opc.c (insert_li): Give an error if the offset has the two
2747 least significant bits set.
2749 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2751 * mips-dis.c (print_insn_mips16): Separate the instruction from
2752 the arguments with a tab, not a space.
2754 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2756 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2759 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2762 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2764 * configure: Rebuild with autoconf 2.12.
2766 Add support for mips16 (16 bit MIPS implementation):
2767 * mips16-opc.c: New file.
2768 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2769 (mips16_reg_names): New static array.
2770 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2771 after seeing a 16 bit symbol.
2772 (print_insn_little_mips): Likewise.
2773 (print_insn_mips16): New static function.
2774 (print_mips16_insn_arg): New static function.
2775 * mips-opc.c: Add jalx instruction.
2776 * Makefile.in (mips16-opc.o): New target.
2777 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2778 * configure: Rebuild.
2780 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2782 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2783 operand specifiers in *save, *restore and movem* instructions.
2785 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2788 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2789 register operands for immediate arithmetic, not, neg, negx, and
2790 set according to condition instructions.
2792 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2793 specifier of the effective-address operand in immediate forms of
2794 arithmetic instructions. The specifier for the immediate operand
2795 notes how and where the constant will be stored.
2797 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2799 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2802 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2805 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2807 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2809 * mn10300-dis.c (disassemble): Handle register lists.
2811 * mn10300-opc.c: Fix handling of register list operand for
2812 "call", "ret", and "rets" instructions.
2814 * mn10300-dis.c (disassemble): Print PC-relative and memory
2815 addresses symbolically if possible.
2816 * mn10300-opc.c: Distinguish between absolute memory addresses,
2817 pc-relative offsets & random immediates.
2819 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2821 (disassemble): Handle SPLIT and EXTENDED operands.
2823 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2825 * mn10300-dis.c: Rough cut at printing some operands.
2827 * mn10300-dis.c: Start working on disassembler support.
2828 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2830 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2832 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2834 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2836 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2838 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2840 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2841 register argument is calls and jmp instructions.
2843 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2845 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2846 getx operand. Fix opcode for mulqu imm,dn.
2848 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2850 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2851 in MN10300_OPERAND_SPLIT operands for how many bits
2852 appear in the basic insn word. Add IMM32_HIGH24,
2853 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2854 (mn10300_opcodes): Use new operands as needed.
2856 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2857 for bset, bclr, btst instructions.
2858 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2860 * mn10300-opc.c (mn10300_operands): Remove many redundant
2861 operands. Update opcode table as appropriate.
2862 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2863 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2865 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2867 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2868 operands (for indexed load/stores). Fix bitpos for DI
2869 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2870 few instructions that insert immediates/displacements in the
2871 middle of the instruction. Add IMM8E for 8 bit immediate in
2872 the extended part of an instruction.
2873 (mn10300_operands): Use new opcodes as appropriate.
2875 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2877 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2878 sequential so the assembler never parallelizes it with
2881 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2883 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2884 a data/address register that appears in register field 0
2885 and register field 1.
2886 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2888 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2890 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2891 standard disassembly.
2893 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2894 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2895 Recategorize PALcode instructions.
2897 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2899 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2901 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2903 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2904 there are no operand types.
2906 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2908 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2910 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2912 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2914 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2916 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2918 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2919 and sst.w instructions.
2921 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2924 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2926 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2929 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2931 * ppc-opc.c (PPCPWR2): Define.
2932 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2935 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2937 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2938 field for movhu instruction.
2940 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2941 cast value to "long" not "signed long" to keep hpux10
2944 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2946 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2949 * mn10300-opc.c (FMT*): Remove definitions.
2951 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2952 for shift-by-register opcodes.
2954 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2955 into [AD][MN][01] for encoding the position of the register
2958 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2960 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2961 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2963 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2965 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2966 Fix various typos. Add "PAREN" operand.
2967 (MEM, MEM2): Define.
2968 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2969 operands. Fix several typos.
2971 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2974 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2976 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2977 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2979 (mn10300_opcodes): Break opcode format out into its own field.
2980 Update many operand fields to deal with signed vs unsigned
2981 issues. Fix one or two typos in the "mov" instruction
2982 opcode, mask and/or operand fields.
2984 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2986 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2987 m68851 wasn't reset.
2989 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2992 all opcodes. Very rough cut at operands for all opcodes.
2994 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2997 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2999 * mn10200-opc.c, mn10300-opc.c: New files.
3000 * mn10200-dis.c, mn10300-dis.c: New files.
3001 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3002 * disassemble.c: Break mn10x00 support into 10200 and 10300
3004 * configure.in: Likewise.
3005 * configure: Rebuilt.
3007 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3009 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3011 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3013 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3015 * disassemble (ARCH_mn10x00): Define.
3016 (disassembler): Handle bfd_arch_mn10x00.
3017 * configure.in: Recognize bfd_mn10x00_arch.
3018 * configure: Rebuilt.
3020 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3022 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3023 accordingly. Don't declare functions using op_rtn.
3025 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3027 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3028 params to be more standard.
3029 * (disassemble): Print absolute addresses and symbolic names for
3030 branch and jump targets.
3031 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3033 * (v850_opcodes): Add breakpoint insn.
3035 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3037 * m68k-opc.c: Move the fmovemx data register cases before the
3038 other cases, so that they get recognized before the data register
3039 does gets treated as a degenerate register list.
3041 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3043 * mips-opc.c: Add a case for "div" and "divu" with two registers
3044 and a destination of $0.
3046 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3048 * mips-dis.c (print_insn_arg): Add prototype.
3049 (_print_insn_mips): Ditto.
3051 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3053 * mips-dis.c (print_insn_arg): Print condition code registers as
3056 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3058 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3060 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3062 * v850-dis.c (disassemble): Make static. Provide prototype.
3064 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3066 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3069 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3071 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3072 ']' characters into the output stream.
3073 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3074 Add "memop" field to all opcodes (for the disassembler).
3075 Reorder opcodes so that "nop" comes before "mov" and "jr"
3076 comes before "jarl".
3078 * v850-dis.c (print_insn_v850): Fix typo in last change.
3080 * v850-dis.c (print_insn_v850): Properly handle disassembling
3081 a two byte insn at the end of a memory region when the memory
3082 region's size is only two byte aligned.
3084 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3086 * v850-dis.c (v850_reg_names): Define.
3087 (v850_sreg_names, v850_cc_names): Likewise.
3088 (disassemble): Very rough cut at printing operands (unformatted).
3090 * v850-opc.c (BOP_MASK): Fix.
3091 (v850_opcodes): Fix mask for jarl and jr.
3093 * v850-dis.c: New file. Skeleton for disassembler support.
3094 * Makefile.in Remove v850 references, they're not needed here.
3095 * configure.in: Add v850-dis.o when building v850 toolchains.
3096 * configure: Rebuilt.
3097 * disassemble.c (disassembler): Call v850 disassembler.
3099 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3100 (insert_d8_6, extract_d8_6): New functions.
3101 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3102 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3104 (IF4A, IF4B): Use "D7" instead of "D7S".
3105 (IF4C, IF4D): Use "D8_7" instead of "D8".
3106 (IF4E, IF4F): New. Use "D8_6".
3107 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3108 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3110 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3111 (v850_operands): Change D16 to D16_15, use special insert/extract
3112 routines. New new D16 that uses the generic insert/extract code.
3113 (IF7A, IF7B): Use D16_15.
3114 (IF7C, IF7D): New. Use D16.
3115 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3117 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3118 message. Issue an error if the branch offset is odd.
3120 * v850-opc.c: Add notes about needing special insert/extract
3121 for all the load/store insns, except "ld.b" and "st.b".
3123 * v850-opc.c (insert_d22, extract_d22): New functions.
3124 (v850_operands): Use insert_d22 and extract_d22 for
3126 (insert_d9): Fix range check.
3128 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3130 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3131 and set bits field to D9 and D22 operands.
3133 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3135 * v850-opc.c (v850_operands): Define SR2 operand.
3136 (v850_opcodes): "ldsr" uses R1,SR2.
3138 * v850-opc.c (v850_opcodes): Fix opcode specs for
3139 sld.w, sst.b, sst.h, sst.w, and nop.
3141 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3143 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3144 end of the opcode table.
3146 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3148 * d10v-opc.c (pre_defined_registers): Added register pairs,
3149 "r0-r1", "r2-r3", etc.
3151 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3153 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3154 Create I16U for an unsigned 16bit mmediate operand.
3155 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3157 * v850-opc.c (v850_operands): Define EP operand.
3158 (IF4A, IF4B, IF4C, IF4D): Use EP.
3160 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3161 with immediate operand, "movhi". Tweak "ldsr".
3163 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3164 correct. Get sld.[bhw] and sst.[bhw] closer.
3166 * v850-opc.c (v850_operands): "not" is a two byte insn
3168 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3170 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3172 * v850-opc.c (two): Get order of words correct.
3174 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3176 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3177 register source and destination operands.
3178 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3180 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3181 same thinko in "trap" opcode.
3183 * v850-opc.c (v850_opcodes): Add initializer for size field
3186 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3187 Add D8 for 8-bit unsigned field in short load/store insns.
3188 (IF4A, IF4D): These both need two registers.
3189 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3190 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3191 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3192 for "ldsr" and "stsr".
3193 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3196 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3197 short store word (sst.w).
3199 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3201 * v850-opc.c (v850_operands): Added insert and extract fields,
3202 pointers to functions that handle unusual operand encodings.
3204 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3206 * v850-opc.c (v850_opcodes): Enable "trap".
3208 * v850-opc.c (v850_opcodes): Fix order of displacement
3209 and register for "set1", "clr1", "not1", and "tst1".
3211 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3213 * v850-opc.c (v850_operands): Add "B3" support.
3214 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3217 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3219 * v850-opc.c: Close unterminated comment.
3221 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3223 * v850-opc.c (v850_operands): Add flags field.
3224 (v850_opcodes): add move opcodes.
3226 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3228 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3229 * configure: (bfd_v850v_arch) Add new case.
3230 * configure.in: (bfd_v850_arch) Add new case.
3231 * v850-opc.c: New file.
3233 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3235 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3237 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3239 * d10v-opc.c: Add additional information to the opcode
3240 table to help determinine which instructions can be done
3243 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3245 * mpw-make.sed: Update editing of include pathnames to be
3248 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3250 * arm-opc.h: Added "bx" instruction definition.
3252 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3254 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3256 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3258 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3260 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3262 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3264 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3266 * makefile.vms: Update for alpha-opc changes.
3268 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3270 * i386-dis.c (print_insn_i386): Actually return the correct value.
3271 (ONE, OP_ONE): #ifdef out; not used.
3273 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3275 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3276 Changed subi operand type to treat 0 as 16.
3278 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3280 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3283 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3285 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3286 memory transfer instructions. Add new format string entries %h and %s.
3287 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3290 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3292 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3293 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3295 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3297 * alpha-dis.c (print_insn_alpha_osf): Remove.
3298 (print_insn_alpha_vms): Remove.
3299 (print_insn_alpha): Make globally visible. Chose the register
3300 names based on info->flavour.
3301 * disassemble.c: Always return print_insn_alpha for the alpha.
3303 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3305 * d10v-dis.c (dis_long): Handle unknown opcodes.
3307 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3309 * d10v-opc.c: Changes to support signed and unsigned numbers.
3310 All instructions with the same name that have long and short forms
3311 now end in ".l" or ".s". Divs added.
3312 * d10v-dis.c: Changes to support signed and unsigned numbers.
3314 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3316 * d10v-dis.c: Change all functions to use info->print_address_func.
3318 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3320 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3321 move ccr/sr insns more strict so that the disassembler only
3322 selects them when the addressing mode is data register.
3324 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3325 * d10v-opc.c (pre_defined_registers): Declare.
3326 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3327 to pick a better name for the registers.
3329 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3331 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3332 operands for fexpand and fpmerge. From Christian Kuehnke
3333 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3335 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3337 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3338 print routine. Take new regnames and cpumask arguments.
3339 Kill the environment variable nonsense.
3340 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3341 (print_insn_alpha_vms): New function. Do VMS style regnames.
3342 * disassemble.c (disassembler): Test bfd flavour to pick
3343 between OSF and VMS routines. Default to OSF.
3345 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3347 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3348 * configure: Rebuild.
3349 * Makefile.in (install): Use @INSTALL_SHLIB@.
3351 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3353 * configure: (bfd_d10v_arch) Add new case.
3354 * configure.in: (bfd_d10v_arch) Add new case.
3355 * d10v-dis.c: New file.
3356 * d10v-opc.c: New file.
3357 * disassemble.c (disassembler) Add entry for d10v.
3359 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3361 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3362 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3364 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3366 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3367 distinguish between variants of the instruction set.
3368 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3369 distinguish between variants of the instruction set.
3371 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3373 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3374 the 8086 instruction set.
3375 * i386-dis.c: General cleanups. Make most things static. Add
3376 prototypes. Get rid of static variables aflags and dflags. Pass
3377 them as args (to almost everything).
3379 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3381 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3383 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3385 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3386 if the next arg is marked with SRC_IN_DST. Gross.
3388 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3389 we're looking for and find EXR.
3391 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3392 if we're looking for KBIT and we don't find it.
3394 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3397 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3398 3bit immediate operands.
3400 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3402 * Released binutils 2.7.
3404 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3405 <kkaempf@progis.ac-net.de>.
3407 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3409 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3411 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3413 * sparc-dis.c (print_insn_sparclite): New routine to print
3414 sparclite instructions.
3416 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3418 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3420 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3422 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3423 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3424 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3426 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3428 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3429 Use autoconf-set values.
3430 (docdir, oldincludedir): Removed.
3431 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3433 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3435 * alpha-opc.c: New file.
3436 * alpha-opc.h: Remove.
3437 * alpha-dis.c: Complete rewrite to use new opcode table.
3438 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3439 * configure: Rebuild with autoconf 2.10.
3440 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3441 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3443 (alpha-opc.o): New target.
3445 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3447 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3448 Set imm_added_to_rs1 even if the source and destination register
3451 * sparc-opc.c: Add some two operand forms of the wr instruction.
3453 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3455 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3458 * disassemble.c (disassembler): Handle H8/S.
3459 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3461 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3463 * sparc-opc.c: Add beq/teq as aliases for be/te.
3465 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3466 <sergei@msil.sps.mot.com>.
3468 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3470 * makefile.vms: New file.
3472 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3474 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3476 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3479 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3481 * i386-dis.c (OP_OFF): Call append_prefix.
3483 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3485 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3486 unsigned long to silence a warning from the Solaris PowerPC
3489 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3491 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3493 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3495 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3497 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3498 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3499 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3500 cpush, cpusha, cpull sparclet insns.
3502 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3504 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3506 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3508 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3509 Set F_FLOAT on other floating point instructions.
3511 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3513 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3515 (powerpc_opcodes): Add 860/821 specific SPRs.
3517 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3519 * configure.in: Permit --enable-shared to specify a list of
3520 directories. Set and substitute BFD_PICLIST.
3521 * configure: Rebuild.
3522 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3523 uses. Set to @BFD_PICLIST@.
3525 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3527 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3528 not "abs", which may be needed for the absolute in something
3529 like btst #0,@10:8. Print L_3 immediates separately from other
3530 immediates. Change ABSMOV reference to ABS8MEM.
3532 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3534 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3535 (current_arch_mask): New static global.
3536 (compute_arch_mask): New static function.
3537 (print_insn_sparc): Delete sparc_v9_p. New static local
3538 current_mach. Resort opcode table if current_mach changes.
3539 Generalize "insn not supported" test.
3540 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3541 Delete test for v9/!v9.
3542 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3544 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3545 (brfcx): Renamed to FBRX.
3546 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3547 coprocessor mnemonics are not supported on the sparclet).
3548 (condf): Renamed to CONDF.
3549 (SLCBCC2): Delete F_ALIAS flag.
3551 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3553 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3554 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3556 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3558 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3559 that the shared library version number is set correctly.
3561 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3563 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3564 Miles Bader <miles@gnu.ai.mit.edu>.
3565 * configure: Rebuild.
3567 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3569 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3572 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3574 * configure: Rebuild with autoconf 2.8.
3576 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3578 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3579 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3581 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3583 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3584 since they appear as targets in Makefile.in.
3585 * configure: Rebuild.
3587 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3589 * mpw-make.sed: Edit out shared library support bits.
3591 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3593 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3594 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3595 (sparc_opcodes): Add sparclet insns.
3596 (sparclet_cpreg_table): New static local.
3597 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3598 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3600 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3602 * i386-dis.c (index16): New static variable.
3603 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3605 (OP_indirE): Return result of OP_E.
3606 (OP_E): Check for 16 bit addressing mode, and disassemble
3607 correctly. Optimised 32 bit case a little. Don't print
3608 "(base,index,scale)" when sib specifies only an offset.
3610 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3612 * configure.in: Set and substitute SHLIB_DEP.
3613 * configure: Rebuild.
3614 * Makefile.in (SHLIB_DEP): New variable.
3615 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3616 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3617 COMMON_SHLIB, add them to piclist with appropriate modifications.
3618 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3619 here: just use piclist.
3621 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3623 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3624 (print_insn_sparc): Rewrite v9/not-v9 tests.
3625 (compare_opcodes): Likewise.
3626 * sparc-opc.c (MASK_<ARCH>): Define.
3627 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3628 (sparclet,v6notv9): Define.
3629 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3630 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3632 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3634 * configure.in: Call AC_PROG_CC before configure.host.
3635 * configure: Rebuild.
3637 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3639 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3641 * i386-dis.c (onebyte_has_modrm): New static array.
3642 (twobyte_has_modrm): New static array.
3643 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3645 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3647 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3650 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3652 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3655 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3657 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3658 m68010up, not just m68020up | cpu32.
3660 * Makefile.in (SONAME): New variable.
3661 ($(SHLINK)): Make a link to the transformed name, as well.
3662 (stamp-tshlink): New target.
3663 (install): Skip stamp-tshlink during install.
3665 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3667 * configure.in: Call AC_ARG_PROGRAM.
3668 * configure: Rebuild.
3669 * Makefile.in (program_transform_name): New variable.
3670 (install): Transform library name before installing it.
3672 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3674 * i960-dis.c (mem): Add HX dcinva instruction.
3676 Support for building as a shared library, based on patches from
3677 Alan Modra <alan@spri.levels.unisa.edu.au>:
3678 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3679 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3680 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3681 * configure: Rebuild.
3682 * Makefile.in (ALLLIBS): New variable.
3683 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3684 (COMMON_SHLIB, SHLINK): New variables.
3685 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3686 (STAGESTUFF): Remove variable.
3687 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3688 (stamp-piclist, piclist): New targets.
3689 ($(SHLIB), $(SHLINK)): New targets.
3690 ($(OFILES)): Depend upon stamp-picdir.
3691 (disassemble.o): Build twice if PICFLAG is set.
3692 (MOSTLYCLEAN): Add pic/*.o.
3693 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3694 (distclean): Remove pic and stamp-picdir.
3695 (install): Install shared libraries.
3696 (stamp-picdir): New target.
3698 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3700 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3701 Print unknown instruction as "unknown", rather than in hex.
3703 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3705 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3707 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3709 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3711 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3713 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3714 when necessary. From Ulrich Drepper
3715 <drepper@myware.rz.uni-karlsruhe.de>.
3717 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3719 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3720 sparc_num_opcodes. Update architecture enum values.
3721 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3722 (sparc_opcode_lookup_arch): New function.
3723 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3724 (sparc_opcodes): Add v9a shutdown insn.
3726 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3728 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3729 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3731 (print_insn_sparc64): Deleted.
3732 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3735 * sparc-opc.c (architecture_pname): Add v9a.
3737 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3739 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3740 incorrectly defined as 0x16 when it should be 0x15.
3741 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3742 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3743 excb (exception barrier) which is defined in the Alpha
3744 Architecture Handbook version 2.
3745 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3746 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3747 disassembled as or, for example.
3749 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3751 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3752 (_print_insn_mips): Change i from int to unsigned int.
3754 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3756 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3757 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3759 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3761 * i386-dis.c: Added Pentium Pro instructions.
3763 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3765 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3768 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3770 * sh-opc.h (sh_nibble_type): Added REG_B.
3771 (sh_arg_type): Added A_REG_B.
3772 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3774 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3776 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3778 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3780 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3782 * Makefile.in (distclean): Remove stamp-h. From Ronald
3783 F. Guilmette <rfg@monkeys.com>.
3785 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3787 From David Mosberger-Tang <davidm@azstarnet.com>:
3788 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3791 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3793 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3794 (sh_table): Added many SH3 opcodes.
3795 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3797 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3799 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3800 (subco,subco.): Mark this PPC, not PPCCOM.
3802 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3804 * configure: Rebuild with autoconf 2.7.
3806 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3808 * configure: Rebuild with autoconf 2.6.
3810 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3812 * configure.in: Sort list of architectures. Accept but do nothing
3813 for alliant, convex, pyramid, romp, and tahoe.
3815 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3817 * a29k-dis.c (print_special): Change num to unsigned int.
3819 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3821 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3824 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3826 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3827 * configure: Rebuilt.
3829 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3831 * configure.in: Add case for bfd_i860_arch.
3832 * configure: Rebuild.
3834 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3836 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3837 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3838 (NEXTDOUBLE): Likewise.
3839 (print_insn_m68k): Don't match fmoveml if there is more than one
3840 register in the list.
3841 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3843 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3845 * m68k-opc.c: Use #W rather than #w.
3846 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3848 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3850 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3851 and likewise for all the dbxx opcodes.
3853 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3855 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3857 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3859 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3860 the VR4100 specific instructions to the mips_opcodes structure.
3862 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3864 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3865 ugly Metrowerks bug in CW6, is fixed in CW7.
3867 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3869 * ppc-opc.c (whole file): Add flags for common/any support.
3871 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3873 * Makefile.in (BISON): Remove macro.
3874 (FLAGS_TO_PASS): Remove BISON.
3876 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3878 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3880 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3881 instructions that take no args by looking at the match mask.
3882 (print_insn_arg): Always print "%" before register names.
3883 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3884 [case '_']: Don't print "@#" before address.
3885 [case 'J']: Use "%s" as format string, not register name.
3886 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3888 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3890 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3893 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3895 From David Mosberger-Tang <davidm@azstarnet.com>
3897 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3898 (alpha_insn_set): added definitions for VAX floating point
3899 instructions (Unix compilers don't generate these, but handcoded
3900 assembly might still use them).
3902 * alpha-dis.c (print_insn_alpha): added support for disassembling
3903 the miscellaneous instructions in the Alpha instruction set.
3905 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3907 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3908 no longer create sysdep.h, sed ppc-opc.c to work around a
3909 serious Metrowerks C bug.
3910 * mpw-make.in: Remove.
3911 * mpw-make.sed: New file, used by mpw-configure to edit
3912 Makefile.in into an MPW makefile.
3914 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3916 * Makefile.in (maintainer-clean): New synonym for realclean.
3918 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3920 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3921 which use '0', '1', and '2' instead. Specify the proper size for
3922 a pmove immediate operand. Correct the pmovefd patterns to be
3923 moves to a register, not from a register.
3924 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3926 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3928 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3929 %psr, %wim, %tbr as F_NOTV9.
3931 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3933 * Makefile.in (Makefile): Just rebuild Makefile when running
3935 (config.h, stamp-h): New targets.
3936 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3937 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3938 rebuilding config.h.
3939 * configure: Rebuild.
3941 * mips-opc.c: Change unaligned loads and stores with "t,A"
3942 operands to use "t,A(b)".
3944 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3946 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3948 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3950 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3951 until 3 instead of until 2.
3953 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3955 * Makefile.in (ALL_CFLAGS): Define.
3956 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3957 (MOSTLYCLEAN): Add config.log.
3958 (distclean): Don't remove config.log.
3959 * configure.in: Substitute HDEFINES.
3960 * configure: Rebuild.
3962 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3964 * sh-opc.h (sh_arg_type): Add F_FR0.
3965 (sh_table, case fmac): Add F_FR0 as first argument.
3967 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3969 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3971 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3973 * sparc-dis.c: Remove all references to NO_V9.
3975 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3977 * aclocal.m4: Just include ../bfd/aclocal.m4.
3978 * configure: Rebuild.
3980 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3982 * sparc-dis.c (X_DISP19): Define.
3983 (print_insn, case 'G'): Use it.
3984 (print_insn, case 'L'): Sign extend displacement.
3986 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3988 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3989 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3990 host_makefile_frag or frags.
3991 * aclocal.m4: New file.
3992 * configure: Rebuild.
3993 * Makefile.in (INSTALL): Set to @INSTALL@.
3994 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3995 (INSTALL_DATA): Set to @INSTALL_DATA@.
3997 (AR_FLAGS): Set to rc rather than qc.
3998 (CC): Define as @CC@.
3999 (CFLAGS): Set to @CFLAGS@.
4000 (@host_makefile_frag@): Remove.
4001 (config.status): Remove dependency upon @frags@.
4003 * configure.in: ../bfd/config.bfd now just sets shell variables.
4004 Use them rather than looking through target Makefile fragments.
4005 * configure: Rebuild.
4007 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4009 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4011 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4013 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4014 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4017 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4018 (lookup_{name,value}): New functions.
4019 (prefetch_table): New static local.
4020 (sparc_{encode,decode}_prefetch): New functions.
4021 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4023 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4025 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4028 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4030 * sh-dis.c: Correct comment on first line of file.
4032 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4034 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4036 * sparc-opc.c (asi, membar): New static locals.
4037 (sparc_{encode,decode}_{asi,membar}): New functions.
4038 (sparc_opcodes, membar insn): Fix.
4039 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4040 Support decoding of membar masks.
4043 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4045 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4047 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4049 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4050 and likewise for the other branches. Add bhs as an alias for bcc,
4051 and likewise for the size variants. Add dbhs as an alias for
4054 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4056 * sh-opc.h (FP sts instructions): Update to match reality.
4058 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4060 * m68k-dis.c: (fpcr_names): Add % before all register names.
4061 (reg_names): Likewise.
4062 (print_insn_arg): Don't explicitly print % before register names.
4063 Add % before register names in static array names. In case 'r',
4064 print data registers as `@(Dn)', not `Dn@'. When printing a
4065 memory address, don't print @# before it.
4066 (print_indexed): Change base_disp and outer_disp from int to
4067 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4068 syntax. Sign extend 8 byte displacement correctly.
4069 (print_base): Print using MIT syntax. Print zpc when appropriate.
4070 Change parameter disp from int to bfd_vma.
4072 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4075 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4077 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4078 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4079 * sh-opc.h (sh_arg_type): Add new operand types.
4080 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4082 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4084 * Makefile.in (distclean): Remove generated file config.h.
4086 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4088 * Makefile.in (distclean): Remove generated file config.h.
4090 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4092 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4094 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4096 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4097 rather than numopcodes. Use m68k_opcodes rather than removed
4098 opcode function. Don't check F_ALIAS.
4099 (print_insn_arg): Change first parameter to be const char *.
4100 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4101 (m68k-opc.o): New target.
4102 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4103 * configure: Rebuild.
4105 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4107 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4108 (opcode_bits, opcode_hash_table): New variables.
4109 (opcodes_initialized): Renamed from opcodes_sorted.
4110 (build_hash_table): New function.
4111 (is_delayed_branch): Use hash table.
4112 (print_insn): Renamed from print_insn_sparc, made static.
4113 Build and use hash table. If !sparc64, ignore sparc64 insns,
4114 and vice-versa if sparc64.
4115 (print_insn_sparc, print_insn_sparc64): New functions.
4116 (compare_opcodes): Move sparc64 opcodes to end.
4117 Print commutative insns with constant second.
4118 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4120 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4122 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4123 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4124 avoids printing a delay slot in a delay slot.
4125 * sh-opc.h (sh_table): Fully bracket last entry.
4127 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4129 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4131 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4133 * configure.in: Get host_makefile_frag from ${srcdir}.
4135 * configure.in: Autoconfiscated. Check for string[s].h. Create
4136 config.h from config.in. Don't set up sysdep.h link.
4137 * sysdep.h: New file.
4138 * configure, config.in: New files, generated from configure.in.
4139 * Makefile.in: Updated to be processed autoconf-style.
4140 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4141 (Makefile): Depend on config.status.
4142 (config.status): New rule.
4143 * configure.bat: Update Makefile substitutions.
4145 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4147 * mips-opc.c (L1): Define.
4148 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4149 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4152 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4154 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4155 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4156 have multiple add units but only a single logical unit.
4158 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4159 shifted by 18, without any insertion or extraction function.
4160 (insert_cr, extract_cr): Remove.
4162 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4164 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4167 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4169 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4170 * sh-opc.h: Add copyright.
4172 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4174 * Makefile.in (crunch-m68k): Delete extra target accidentally
4175 checked in a while ago.
4177 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4179 * sh-opc.h (sh_table): Add SH3 support.
4181 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4183 * sh-opc.h: Added bsrf and braf.
4185 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4187 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4188 bogus [ls]fm{ea,fd} patterns.
4190 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4191 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4192 initialize it from memory. Make function static.
4193 (print_insn_{big,little}_arm): New functions.
4194 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4195 the correct endianness.
4197 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4199 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4202 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4204 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4205 17th, so that it builds again using GCC as the compiler.
4207 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4209 * mips-dis.c (print_insn_little_mips): Cast return value from
4210 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4211 expects an unsigned long, and that might be fewer words of
4212 argument storage (e.g., if bfd_vma is long long on a 32-bit
4214 (print_insn_big_mips): Likewise with bfd_getb32 value.
4215 (_print_insn_mips): Now static.
4217 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4219 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4220 gcc memory hog problem with initializer is fixed.
4222 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4224 Merge in support for Mac MPW as a host.
4225 (Old change descriptions retained for informational value.)
4227 * mpw-config.in (archname): Compute from the config.
4228 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4230 * mpw-config.in (target_arch): Compute from canonical target.
4231 (m68k, mips, powerpc, sparc): Add architectures.
4232 * mpw-make.in (disassemble.c.o): Add.
4233 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4235 * mpw-config.in (BFD_MACHINES): Set to a default value.
4236 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4238 * mpw-make.in (CSEARCH): Add extra-include to search path.
4240 * mpw-config.in (varargs.h): Don't create.
4241 (sysdep.h): Create using forward-include.
4242 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4244 * mpw-config.in: New file, MPW version of configure.in.
4245 * mpw-make.in: New file, MPW version of Makefile.in.
4247 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4249 * alpha-dis.c (print_insn_alpha): Put empty statement after
4252 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4254 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4255 (low_sign_extend): Likewise.
4256 (get_field): Delete unused function.
4257 (set_field, deposit_14, deposit_21): Likewise.
4259 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4261 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4264 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4266 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4268 * alpha-opc.h (OSF_ASMCODE): define
4269 print pal-code names as defined in App C of the
4270 Alpha Architecture Reference Manual
4272 * alpha-dis.c: cleaned up output
4273 print stylized code forms as defined in App A.4.3 of the
4274 Alpha Architecture Reference Manual
4276 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4278 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4280 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4283 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4285 * m68k-dis.c (opcode): New function. Returns address of opcode
4286 table entry given index, even if the opcode table was split to
4287 work around gcc bugs.
4288 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4290 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4291 (reg_names): Now const.
4292 (print_insn_arg): Arrays cacheFieldName and names now const.
4293 (print_indexed): Array scales now const.
4295 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4297 * ppc-opc.c: Sort recently added instructions by minor opcode
4298 number within major opcode number.
4300 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4302 * hppa-dis.c: Include libhppa.h.
4304 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4306 * mips-opc.c: Change dli to use M_DLI, and add dla.
4308 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4310 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4312 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4314 * mips-opc.c: Add r4650 mul instruction.
4316 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4318 * mips-opc.c: Add uld and usd macros for unaligned double load and
4321 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4323 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4324 mfdcr, mtdcr, icbt, iccci.
4326 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4328 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4329 signed char fields to shorts, more portable.
4331 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4333 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4334 char fields as signed chars, since they may have negative values.
4336 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4338 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4339 (mycroft@netbsd.org).
4341 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4343 From "Logg, Ed" <elogg@ea.com>:
4344 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4345 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4348 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4350 * ppc-opc.c: Changes based on patch from David Edelsohn
4351 <edelsohn@mhpcc.edu>.
4352 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4355 (insert_tbr): New static function.
4356 (extract_tbr): New static function.
4357 (XFXFXM_MASK, XFXM): Define.
4358 (XSPRBAT_MASK, XSPRG_MASK): Define.
4359 (powerpc_opcodes): Add instructions to access special registers by
4360 name. Add mtcr and mftbu.
4362 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4364 * mips-opc.c (P3): Define.
4365 (mips_opcodes): Add mad and madu.
4367 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4369 * configure.in: Add W65 support.
4370 * disassemble.c: Likewise.
4371 * w65-opc.h, w65-dis.c: New files.
4373 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4375 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4378 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4380 * mips-opc.c: Add dli as a synonym for li.
4382 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4384 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4385 print something for reserved opcode values, even if it won't
4388 * mips-dis.c (_print_insn_mips): When initializing, shift right
4389 and mask, to avoid sign extension problems on the Alpha.
4391 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4394 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4396 * sh-opc.h (mov.l gbr): Get direction right.
4397 * sh-dis.c (print_insn_shx): New function.
4398 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4399 print opcodes with right byte order.
4401 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4403 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4404 to avoid conflicts with getopt.
4406 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4408 * hppa-dis.c (print_insn_hppa): Read the instruction using
4409 bfd_getb32, so that it works on a little endian or 64 bit host.
4410 Remove unused local variable op.
4412 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4414 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4415 addu does not work correctly if -mips3.
4417 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4419 * a29k-dis.c (print_special): Add special register names defined
4420 on 29030, 29040 and 29050.
4421 (print_insn): Handle new operand type 'I'.
4423 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4425 * Makefile.in (INSTALL): Use top level install.sh script.
4427 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4429 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4430 that it works on a little endian host.
4432 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4434 * configure.in: Use ${config_shell} when running config.bfd.
4436 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4438 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4440 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4442 * a29k-dis.c (print_insn): Print the opcode.
4444 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4446 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4448 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4450 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4452 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4454 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4455 which store a value into memory.
4457 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4459 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4460 * arm-dis.c, arm-opc.h: New files.
4462 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4464 * Makefile.in (ns32k-dis.o): Add dependency.
4465 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4466 string, not as array of chars.
4468 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4470 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4472 * sparc-opc.c: Added sparclite extended FP operations, and
4473 versions of v9 impdep* instructions permitting specification of
4476 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4478 * i960-dis.c (reg_names): Now const.
4479 (struct sparse_tabent): New type, copied from array type in mem
4481 (ctrl): Local static array ctrl_tab now const.
4482 (cobr): Local static array cobr_tab now const.
4483 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4484 static variable mem_tab no longer explicitly initialized. Changed
4485 mem_init to const array of struct sparse_tabent.
4486 (reg): Local static variable reg_tab no longer explicitly
4487 initialized. Changed reg_init to const array of struct
4489 (ea): Local static array scale_tab now const.
4491 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4494 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4496 * configure.bat: the disassember needs to be enabled for
4497 "objdump -d" to work in djgpp.
4499 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4501 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4502 (invalid_float): Enabled general version, doesn't require running
4503 on ns32k host. Changed to take char* argument, and test for
4504 explicitly specified sizes, instead of using sizeof() on host CPU
4506 (INVALID_FLOAT): Cast first argument.
4507 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4508 list_P032, list_M032): Now const.
4509 (optlist, list_search): Made appropriate arguments now point to
4511 (print_insn_arg): Changed static array of one-character-string
4512 pointers into a static const array of characters; fixed sprintf
4513 statement accordingly.
4515 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4517 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4518 from distribution. A ns32k-dis.c from a previous distribution has
4519 been brought up to date and supports the new interface.
4521 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4523 * configure.in: add bfd_ns32k_arch target support.
4525 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4526 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4528 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4530 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4533 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4535 * h8300-dis.c, mips-dis.c: Don't use true and false.
4537 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4539 * configure.in: Change --with-targets to --enable-targets.
4541 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4543 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4544 opcodes to the first instruction with that opcode, to speed
4545 disassembly of large files. From ralphc@pyramid.com (Ralph
4548 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4550 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4552 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4554 * configure.bat: update to latest makefile.in
4556 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4558 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4559 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4560 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4561 slot insn is in a delay slot.
4562 * z8k-opc.h: (resflg): Fix patterns.
4563 * h8500-opc.h Fix CR insn patterns.
4565 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4567 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4568 "cmpl" before POWER versions, so that gas -many uses them.
4570 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4572 * disassemble.c: New file.
4573 * Makefile.in (OFILES): Add disassemble.o.
4574 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4575 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4576 binutils/configure.in.
4578 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4579 opcode being examined.
4581 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4583 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4584 (insert_ral, insert_ram, insert_ras): New functions.
4585 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4586 RAS for store with update.
4588 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4590 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4591 (edelsohn@npac.syr.edu).
4593 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4595 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4598 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4600 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4602 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4604 * ppc-opc.c (powerpc_operands): The signedp field has been
4605 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4606 instead. Add new operand SISIGNOPT.
4607 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4608 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4609 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4612 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4614 * i386-dis.c (struct private): Renamed to dis_private. `private'
4615 is a reserved word for dynix cc.
4617 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4619 * configure.in: Change error message to refer to bfd/config.bfd
4620 rather than bfd/configure.in.
4622 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4624 * ppc-opc.c: Define POWER2 as short alias flag.
4625 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4628 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4630 * i960-dis.c (print_insn_i960): Don't read a second word for
4631 opcodes 0, 1, 2 and 3.
4633 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4635 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4637 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4639 * m68881-ext.c: Removed; no longer used.
4640 * Makefile.in: Changed accordingly.
4642 * m68k-dis.c (ext_format_68881): Don't declare.
4643 (print_insn_m68k): If an instruction uses place 'i', it uses at
4644 least four fixed bytes.
4645 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4646 extended float, convert to double using floatformat_to_double, not
4647 ieee_extended_to_double, and fetch the data before converting it.
4649 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4651 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4652 davidj@ICSI.Berkeley.EDU (David Johnson).
4654 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4656 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4657 PowerPC uses bdnz[l][a].
4659 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4661 * dis-buf.c, i386-dis.c: Include sysdep.h.
4663 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4665 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4667 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4668 by Motorola PowerPC 601 with PPC_OPCODE_601.
4669 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4670 Disassemble Motorola PowerPC 601 instructions as well as normal
4671 PowerPC instructions.
4673 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4675 * i960-dis.c (reg, mem): Just use a static array instead of
4678 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4680 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4681 condition name index if this is for a negated condition.
4683 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4684 Floating point format for 'H' operand is backwards from normal
4685 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4686 operands (fmpyadd and fmpysub), handle bizarre register
4687 translation correctly for single precision format.
4689 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4690 or 'I' operands if the next format specifier is 'M' (fcmp
4691 condition completer).
4693 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4695 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4696 single number giving a bitmask for the MB and ME fields of an M
4697 form instruction. Change NB to accept 32, and turn it into 0;
4698 also turn 0 into 32 when disassembling. Seperated SH from NB.
4699 (insert_mbe, extract_mbe): New functions.
4700 (insert_nb, extract_nb): New functions.
4701 (SC_MASK): Mask out SA and LK bits.
4702 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4703 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4704 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4705 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4706 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4707 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4708 (powerpc_macros): Define table of macro definitions.
4709 (powerpc_num_macros): Define.
4711 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4712 if PPC_OPERAND_NEXT is set.
4714 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4716 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4717 char. Retrieve contents using bfd_getl32 instead of shifting.
4719 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4721 * ppc-opc.c: New file. Opcode table for PowerPC, including
4722 opcodes for POWER (RS/6000).
4723 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4724 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4725 (CFILES): Add ppc-dis.c.
4726 (ppc-dis.o, ppc-opc.o): New targets.
4727 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4729 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4731 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4732 No space before 'u', 'f', or 'N'.
4734 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4736 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4737 farther than we should.
4739 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4741 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4743 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4745 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4747 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4748 needs it, to prevent reading past the end of a section.
4750 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4752 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4753 Removed t,A case for la; always use t,A(b) case.
4755 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4757 From Ted Lemen <mellon@pepper.ncd.com>
4758 * mips-dis.c (print_insn_arg): Handle 'k'.
4759 * mips-opc.c: Make cache use k, not t.
4761 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4763 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4764 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4765 FLOAT_FORMAT_CODE to put out floating point register names.
4767 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4771 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4775 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4777 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4778 larger than 32. Moved dsxx32 variants first for disassembler.
4780 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4782 * z8kgen.c, z8k-opc.h: Add full lda information.
4784 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4786 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4787 movb instructions. Any necessary space will be emitted by
4788 the code to handle nullification completers.
4790 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4792 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4794 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4796 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4797 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4799 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4801 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4803 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4805 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4806 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4808 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4810 * m88k-dis.c (m88kdis): comment change. Remove space after
4812 (printop): handle new arg types DEC and XREG for m88110.
4814 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4816 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4817 type for absolute branch addresses. Delete special
4818 "ble" and "be" code in 'W' operand code.
4820 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4822 * mips-opc.c: Set hazard information correctly for branch
4823 likely instructions.
4825 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4827 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4828 info->fprintf_func for printing and info->print_address_func for
4831 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4833 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4835 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4837 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4838 Corrected second case of "b" for disassembler.
4840 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4842 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4843 to BFD swapping routines to correspond to BFD name changes.
4845 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4847 * mips-opc.c: Change div machine instruction to be z,s,t rather
4848 than s,t. Change div macro to be d,v,t rather than d,s,t.
4849 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4850 rem and remu which generates only the corresponding div
4851 instruction. This is for compatibility with the MIPS assembler,
4852 which only generates the simple machine instruction when an
4853 explicit destination of $0 is used.
4854 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4856 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4858 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4859 WR_31 hazard for bal, bgezal, bltzal.
4861 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4863 * hppa-dis.c (print_insn_hppa): Use print function
4864 from within the disassemble_info, not fprintf_filtered.
4866 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4868 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4869 Law, law@cs.utah.edu.)
4871 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * mips-opc.c ("absu"): Removed.
4876 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4878 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4879 Changed hazard information to distinguish between memory load
4880 delays and coprocessor load delays.
4882 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4884 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4886 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4888 * configure.in: Don't pass cpu to config.bfd.
4890 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4892 * m88k-dis.c (m88kdis): Make class unsigned.
4894 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4896 * alpha-dis.c (print_insn_alpha): One branch format case was
4897 missing the instruction name.
4899 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4901 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4902 Add the arch-specific auxiliary files.
4903 (OFILES): Remove the arch-specific auxiliary files
4904 and use BFD_MACHINES instead of DIS_LIBS.
4905 * configure.in: Set BFD_MACHINES based on --with-targets option.
4907 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4909 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4912 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4914 * sparc-opc.c: Change CONST to const to deal with gcc
4915 -Dconst=__const -traditional.
4917 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4919 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4920 coprocessor instructions out of #if 0, and made them use new
4923 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4925 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4927 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4929 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4930 instruction, for use by the disassembler.
4932 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4933 hand-coded sign extensions that depended on 32-bit host ints.
4934 FIXME, we still depend on big-endian host bitfield ordering.
4935 (sparc_print_insn): Set the insn_info_valid field, and the
4936 other fields that describe the instruction being printed.
4938 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4940 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4941 `jmp' instead of just one of them.
4943 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4945 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4946 (fput_fp_reg_r): Renamed from fput_reg_r.
4947 (fput_fp_reg): New function.
4948 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4950 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4952 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4954 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4956 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4958 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4959 don't output a space.
4961 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4963 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4965 * mips-opc.c: New file, containing opcode table from
4966 ../include/opcode/mips.h.
4967 * Makefile.in: Add it.
4969 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4971 * m88k-dis.c: New file, moved in from gdb and changed to use the
4972 new dis-asm.h disassembler interface.
4973 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4974 (m88k-dis.o): New target.
4976 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4978 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4979 argument string const char * to correspond to opcode/mips.h.
4981 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4983 * mips-dis.c: Updated to account for name changes in new version
4985 * Makefile.in: Added header file dependencies.
4987 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4989 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4991 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4993 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4994 extend, rather than shifts.
4996 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4998 * Makefile.in: Undo 15 June change.
5000 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5002 * m68k-dis.c (print_insn_arg): Change return value to byte count
5004 * m68k-dis.c: Re-write to detect invalid operands before
5005 printing anything, so we can handle this the same way we
5006 handle invalid opcodes.
5008 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5010 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5012 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5014 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5017 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5019 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5021 * configure.in: Do make sysdep.h link.
5022 * Makefile.in: Search ../include. Don't search ../bfd.
5024 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5026 Changes from Jeff Law, law@cs.utah.edu:
5027 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5028 Do not print a space before the completers specified by
5031 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5033 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5034 defined, since gdb has been fixed.
5036 Changes from Jeff Law, law@cs.utah.edu:
5037 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5038 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5039 be a *disassemble_info, not a *FILE.
5040 * hppa-dis.c: Support 'd', '!', and 'a'.
5041 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5042 * hppa-dis.c: Delete cases which are no longer needed.
5044 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5046 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5048 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5050 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5053 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5055 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5056 * configure.in: No longer need to configure to get sysdep.h.
5058 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5060 * Patches from Jeffrey Law <law@cs.utah.edu>.
5061 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5062 templates for 1.1 FP computational instructions.
5064 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5066 * h8500-dis.c (print_insn_h8500): Address argument is type
5068 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5071 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5072 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5074 * sparc-dis.c (compare_opcodes): Move static declaration to
5077 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5079 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5080 instruction, remove unimp hack from 'l' argument.
5082 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5084 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5087 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5089 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5090 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5093 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5095 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5096 arrays of string pointers to 2-d arrays of chars, to save
5099 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5101 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5102 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5104 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5106 * hppa-dis.c: New file from Utah, adapted to new disassembler
5108 * Makefile.in: Include it.
5110 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5112 * sh-dis.c, sh-opc.h: New files.
5114 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5116 * alpha-dis.c, alpha-opc.h: New files.
5118 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5120 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5123 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5125 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5127 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5129 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5132 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5134 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5135 and double percent signs a few places.
5137 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5139 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5140 Use info->print_address_func not print_address.
5142 * dis-buf.c (generic_print_address): New function.
5144 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5146 * Makefile.in: Add sparc-dis.c.
5147 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5149 Add `add' instruction to the set that get checked
5150 for a preceding `sethi' in order to print an absolute address.
5151 * (print_insn): Disassembly prefers real instructions.
5152 (is_delayed_branch): Speed up.
5153 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5154 Still missing some float ops, and needs testing.
5155 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5156 F_ALIAS. Use printf, not fprintf, when not passing a file
5158 (compare_opcodes): Check that identical instructions have
5159 identical opcodes, complain otherwise.
5162 * Include reg_names.
5164 Use dis-asm.h/read_memory_func interface.
5166 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5168 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5169 deliberately return non-zero to setjmp from longjmp. Otherwise
5170 this code fails to compile.
5172 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5174 * m68k-dis.c: Fix prototype for fetch_arg().
5176 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5178 * dis-buf.c: New file, for new read_memory_func interface.
5179 Makefile.in (OFILES): Include it.
5180 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5181 Use new read_memory_func interface.
5183 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5185 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5186 * h8500-opc.h: Fix couple of opcodes.
5188 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5190 * Makefile.in: add dvi & installcheck targets
5192 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5194 * Makefile.in: Update for h8500-dis.c.
5196 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5198 * h8500-dis.c, h8500-opc.h: New files
5200 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5202 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5203 ../include/dis-asm.h.
5204 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5205 and ../gdb/m68k-pinsn.c).
5206 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5207 and ../gdb/i386-pinsn.c).
5208 * m68881-ext.c: New file. Moved definition of
5209 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5210 * Makefile.in: Adjust for new files.
5211 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5212 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5213 can be dis-assembled.
5215 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5217 * mips-dis.c (print_insn_arg): Now returns void.
5219 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5221 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5222 files that use the macros.
5224 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5226 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5227 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5228 (CFILES): Added mips-dis.c.
5230 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5232 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5233 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5235 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5237 * Makefile.in: Improve *clean rules.
5238 * configure.in: Allow a default host.
5240 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5242 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5243 files include other sysdep files
5245 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5247 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5249 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5251 * configure.in: For host support, use ../bfd/configure.host
5252 so it stays in sync with the ../bfd/hosts database.
5254 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5256 * configure.in: use cpu-vendor-os triple instead of nested cases
5258 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5260 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5261 *always* the wrong one.
5263 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5265 * z8kgen.c: added copyright info
5267 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5269 * z8k-dis.c (unparse_instr): prettier tabs
5270 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5272 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5274 * configure.in: Add ncr* configuration.
5275 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5276 picayune ANSI compilers happy.
5278 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5280 * configure.in (i386): Make i386 and i486 synonymous for now.
5281 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5283 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5285 * Makefile.in (install): Fix typo.
5287 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5289 * Makefile.in (make): Remove obsolete crud.
5290 (sparc-opc.o): Avoid Sun Make VPATH bug.
5292 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5294 * Makefile.in: since there are no SUBDIRS, remove rule and
5295 references of subdir_do.
5297 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5299 * Makefile.in (install): Get the library name right here too.
5300 Don't install bfd.h, since it's unrelated to this library. No
5301 subdirs to recurse into, either.
5302 (CFILES): The source file has a .c suffix, not .o.
5304 * sparc-opc.c: New file, moved from BFD.
5305 * Makefile.in (OFILES): Build it.
5307 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5309 * z8k-dis.c: fixed forward refferences of some declarations.
5311 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5313 * Makefile.in: get the name of the library right
5315 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5317 * z8k-dis.c: knows how to disassemble z8k stuff
5318 * z8k-opc.h: new file full of z8000 opcodes
5322 version-control: never