1 Tue Sep 7 13:50:32 1999 Jeffrey A Law (law@cygnus.com)
3 * hppa-dis.c (print_insn_hppa): Handle 'Z' argument.
5 1999-09-07 Nick Clifton <nickc@cygnus.com>
7 * sh-opc.h: Add mulu.w and muls.w patterns. These are the correct
8 names for the mulu and muls patterns.
10 1999-09-04 Steve Chamberlain <sac@pobox.com>
14 * disassemble.c (disassembler): Handle bfd_arch_pj.
15 * configure.in: Handle bfd_pj_arch.
16 * Makefile.am: Rebuild dependencies.
17 (CFILES): Add pj-dis.c and pj-opc.c.
18 (ALL_MACHINES): Add pj-dis.lo and pj-opc.lo.
19 * configure, Makefile.in: Rebuild.
21 1999-09-04 H.J. Lu <hjl@gnu.org>
23 * i386-dis.c (print_insn_i386): Set bytes_per_line to 7.
25 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
27 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
29 1999-08-04 Doug Evans <devans@casey.cygnus.com>
31 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
32 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
33 * m32r-opinst.c: Rebuild.
35 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
37 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
40 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
42 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
43 extract_10U_store): New.
44 (print_insn_hppa): Add new completers.
46 * hppa-dis.c (signed_unsigned_names,mix_half_names,
47 saturation_names): New.
48 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
50 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
52 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
54 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
55 to decide to print a space.
57 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
59 * i386-dis.c: Add AMD athlon instruction support.
61 1999-08-10 Ian Lance Taylor <ian@zembu.com>
63 From Wally Iimura <iimura@microunity.com>:
64 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
65 overflow at end of address space.
66 (generic_print_address): Use sprintf_vma.
68 1999-08-08 Ian Lance Taylor <ian@zembu.com>
70 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
71 MKDEP. Rebuild dependencies.
72 * Makefile.in: Rebuild.
74 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
76 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
77 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
78 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
79 (print_insn_hppa): Add 64 bit condition completers.
81 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
83 * hppa-dis.c (print_insn_hppa): Change condition args to use
86 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
88 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
91 1999-07-21 Ian Lance Taylor <ian@zembu.com>
94 * configure.bat: Remove; obsolete.
96 1999-07-11 Ian Lance Taylor <ian@zembu.com>
98 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
99 (generic_strcat_address): Add cast to avoid warning.
100 * i386-dis.c: Initialize all structure fields to avoid warnings.
101 Add ATTRIBUTE_UNUSED as appropriate.
103 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
105 * sparc-dis.c (print_insn_sparc): Differentiate between
106 addition and oring when guessing symbol for comment.
108 1999-07-05 Nick Clifton <nickc@cygnus.com>
110 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
113 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
115 * i386-dis.c: Mention intel mode specials in macro char comment.
117 1999-06-21 Ian Lance Taylor <ian@zembu.com>
119 * alpha-dis.c: Don't include <stdlib.h>.
120 * arm-dis.c: Include "sysdep.h".
121 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
123 * Makefile.am: Rebuild dependencies.
124 * Makefile.in: Rebuild.
126 1999-06-16 Nick Clifton <nickc@cygnus.com>
128 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
131 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
133 * arm-dis.c (arm_regnames): Turn into a pointer to a register
135 (arm_regnames_standard): New variable: Array of ARM register
136 names according to ARM instruction set nomenclature.
137 (arm_regnames_apcs): New variable: Array of ARM register names
138 according to ARM Procedure Call Standard.
139 (arm_regnames_raw): New variable: Array of ARM register names
140 using just 'r' and the register number.
141 (arm_toggle_regnames): New function: Toggle the chosen register set
143 (parse_disassembler_options): New function: Parse any target
144 disassembler command line options.
145 (print_insn_big_arm): Call parse_disassembler_options if any
147 (print_insn_little_arm): Call parse_disassembler_options if any
150 1999-06-13 Ian Lance Taylor <ian@zembu.com>
152 * i386-dis.c (FWAIT_OPCODE): Define.
153 (used_prefixes): New static variable.
154 (fetch_data): Don't print an error message if we have already
155 fetched some bytes successfully.
156 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
157 (prefix_name): New static function.
158 (print_insn_i386): If setjmp fails, indicating a data error, but
159 we have managed to fetch some bytes, print the first one as a
160 prefix or a .byte pseudo-op. If fwait is followed by a non
161 floating point instruction, print the first prefix. Set
162 used_prefixes when prefixes are used. If any prefixes were not
163 used after disassembling the instruction, print the first prefix
164 instead of printing the instruction.
165 (putop): Set used_prefixes when prefixes are used.
166 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
167 (OP_DIR, OP_SIMD_Suffix): Likewise.
169 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
171 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
172 Support signx %reg, clruw %reg.
174 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
176 * sparc-opc.c: Add aliases Solaris as supports.
178 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
180 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
181 * Makefile.in: Regenerated.
183 1999-06-03 Philip Blundell <philb@gnu.org>
185 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
186 when target is PC-relative.
188 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
190 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
193 * m68k-dis.c (fetch_arg): Add places `n', `o'.
195 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
196 Add mcf5206e to appropriate instructions.
197 Add alias for MAC, MSAC.
199 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
202 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
203 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
205 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
207 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
209 * i386-dis.c (Ed): Define.
210 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
212 (OP_rm): Rename to OP_Rd.
215 (putop): Add const to template and p.
216 (print_insn_x86): Delete.
217 (print_insn_i386): Merge old function print_insn_x86. Add const
219 (struct dis386): Add const to name.
220 (dis386_att, dis386_intel): Add const.
221 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
222 (names32, names16, names8, names_seg, index16): Add const.
223 (grps, prefix_user_table, float_reg): Add const.
224 (float_mem_att, float_mem_intel): Add const.
225 (oappend): Add const to s.
226 (OP_REG): Add const to s.
227 (ptr_reg): Add const to s.
228 (dofloat): Add const to dp.
229 (OP_C): Don't skip modrm, it's now done in OP_Rd.
232 (OP_Rd): Check for valid mod. Call Op_E to print.
233 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
234 (OP_MS): Check for valid mod. Call Op_EM to print.
235 (OP_3DNowSuffix): Set obufp and use oappend rather than
236 strcat. Call BadOp() for errors.
237 (OP_SIMD_Suffix): Likewise.
238 (BadOp): New function.
240 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
242 * i386-dis.c (dis386_intel): Remove macro chars, except for
243 jEcxz. Change cWtR and cRtd to cW and cR.
244 (dis386_twobyte_intel): Remove macro chars here too.
245 (putop): Handle R and W macros for intel mode.
247 * i386-dis.c (SIMD_Fixup): New function.
248 (dis386_twobyte_att): Use it on movlps and movhps, and change
249 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
250 (dis386_twobyte_intel): Same here.
252 * i386-dis.c (Av): Remove.
256 (OP_SIMD_Suffix): New function.
257 (OP_DIR): Remove dead code.
258 (eAX_reg..eDI_reg): Renumber.
259 (onebyte_has_modrm): Table numbering comments.
260 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
261 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
262 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
263 and handle SIMD cmp insns in OP_SIMD_Suffix.
264 (info->bytes_per_line): Bump from 5 to 6.
266 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
267 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
269 PIII SIMD support from Doug Ledford <dledford@redhat.com>
270 * i386-dis.c (XM, EX, None): Define.
271 (OP_XMM, OP_EX, OP_None): New functions.
272 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
273 (GRP14): Rename to GRPAMD.
274 (GRP*): Add USE_GROUPS flag.
276 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
277 (twobyte_has_modrm): Add SIMD entries.
278 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
279 (grps): Add SIMD insns.
280 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
281 oappend repz if uses_f3_prefix. Add code to handle new groups for
284 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
285 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
286 operand from Av to Jv.
288 1999-05-07 Nick Clifton <nickc@cygnus.com>
290 * mcore-dis.c (print_insn_mcore): Use .short to display
291 unidentified instructions, not .word.
293 1999-04-26 Tom Tromey <tromey@cygnus.com>
295 * aclocal.m4, configure: Updated for new version of libtool.
297 1999-04-14 Doug Evans <devans@casey.cygnus.com>
299 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
300 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
302 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
304 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
307 1999-04-10 Doug Evans <devans@casey.cygnus.com>
309 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
310 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
312 1999-04-06 Ian Lance Taylor <ian@zembu.com>
314 * opintl.h (LC_MESSAGES): Never define.
316 1999-04-04 Ian Lance Taylor <ian@zembu.com>
318 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
319 (separator_char, scale_char): Likewise.
320 (print_insn_x86): Likewise.
321 (print_insn_i386): Likewise. Add declaration.
323 1999-03-26 Doug Evans <devans@casey.cygnus.com>
325 * fr30-dis.c: Rebuild.
326 * m32r-dis.c: Rebuild.
328 1999-03-23 Ian Lance Taylor <ian@zembu.com>
330 * m68k-opc.c: Change compare instructions to use "@s" rather than
331 ";s" when used with an immediate operand.
333 1999-03-22 Doug Evans <devans@casey.cygnus.com>
335 * cgen-opc.c (cgen_set_cpu): Delete.
336 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
337 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
339 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
341 * po/opcodes.pot: Rebuild.
343 1999-03-16 Martin Hunt <hunt@cygnus.com>
345 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
347 1999-03-11 Doug Evans <devans@casey.cygnus.com>
349 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
350 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
351 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
352 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
353 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
354 * m32r-opinst.c: Rebuild.
356 1999-02-25 Doug Evans <devans@casey.cygnus.com>
358 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
359 (cgen_hw_lookup_by_num): Rewrite.
360 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
361 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
362 * m32r-opinst.c: Rebuild.
364 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
366 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
367 (insert_jhint): Fix insertion mask.
368 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
370 1999-02-10 Doug Evans <devans@casey.cygnus.com>
372 * Makefile.in: Rebuild.
374 1999-02-09 Doug Evans <devans@casey.cygnus.com>
376 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
377 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
378 * Makefile.am: Remove references to them.
379 (HFILES): Add fr30-desc.h,m32r-desc.h.
380 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
382 (ALL_MACHINES): Update.
383 * configure.in: Redo handling of cgen_files.
384 (bfd_i960_arch): Delete i960c-*.lo files.
385 * configure: Regenerate.
386 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
387 (hash_insn_array): Rewrite.
388 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
389 (hash_insn_array): Rewrite.
390 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
391 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
392 (cgen_lookup_get_insn_operands): Ditto.
393 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
394 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
395 * po/POTFILES.in: Rebuild.
396 * po/opcodes.pot: Rebuild.
398 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
400 * Makefile.am: Rebuild dependencies.
401 (HFILES): Add fr30-opc.h.
402 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
403 * Makefile.in: Rebuild.
405 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
406 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
408 * acconfig.h: Remove.
409 * configure: Rebuild with current autoconf/automake.
410 * aclocal.m4: Likewise.
411 * config.in: Likewise.
412 * Makefile.in: Likewise.
414 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
416 * m68k-opc.c: Correct move (not movew) to status word on 5200.
418 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
420 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
421 * i386-dis.c (x_mode): Define.
425 (dis386_twobyte): Remove.
426 (dis386_twobyte_att): New.
427 (dis386_twobyte_intel): New.
428 (print_insn_x86): Use new arrays.
430 (float_mem_intel): New.
431 (float_mem_att): New.
432 (dofloat): Use new float_mem arrays.
433 (print_insn_i386_att): New.
434 (print_insn_i386_intel): New.
435 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
436 (putop): Handle intel syntax.
437 (OP_indirE): Handle intel syntax.
438 (OP_E): Handle intel syntax.
439 (OP_I): Handle intel syntax.
440 (OP_sI): Handle intel syntax.
441 (OP_OFF): Handle intel syntax.
445 1999-01-27 Doug Evans <devans@casey.cygnus.com>
447 * fr30-opc.h,fr30-opc.c: Rebuild.
448 * i960c-opc.h,i960c-opc.c: Rebuild.
449 * m32r-opc.c: Rebuild.
451 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
453 * hppa-dis.c: revert HP merge changes until HP gives us
456 1999-01-19 Nick Clifton <nickc@cygnus.com>
458 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
459 offsets as well as symbloic address.
461 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
463 * hppa-dis.c: fix comments and some indentation.
465 1999-01-12 Doug Evans <devans@casey.cygnus.com>
467 * fr30-opc.c,i960c-opc.c: Regenerate.
469 1999-01-11 Doug Evans <devans@casey.cygnus.com>
471 * fr30-opc.c: Regenerate.
473 1999-01-06 Doug Evans <devans@casey.cygnus.com>
475 * m32r-dis.c: Regenerate.
477 1999-01-05 Doug Evans <devans@casey.cygnus.com>
479 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
480 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
481 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
483 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
485 * configure.in: Require autoconf 2.12.1 or higher.
487 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
489 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
491 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
493 * fr30-opc.c: Regenerated.
495 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
497 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
499 1998-12-15 Dave Brolley <brolley@cygnus.com>
501 * fr30-opc.c,fr30-opc.h: Regenerated.
503 1998-12-14 Dave Brolley <brolley@cygnus.com>
505 * fr30-opc.c,fr30-opc.h: Regenerated.
507 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
509 * fr30-opc.c,fr30-opc.h: Regenerated.
511 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
513 * m32r-opc.c: Regenerate.
515 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
517 * dis-buf.c (generic_strcat_address): reformat to GNU coding
518 conventions. change sprintf call to an sprintf_vma call.
520 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
522 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
524 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
526 The following changes were made by
527 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
528 David Taylor <taylor@texas.cygnus.com>, and
529 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
530 merge in changes by HP; HP did not create ChangeLog entries.
532 * dis-buf.c (generic_strcat_address): new function.
534 * hppa-dis.c: Changes to improve hppa disassembly.
535 Changed formatting in : reg_names, fp_reg_names,control_reg,
536 New variables : sign_extension_names, deposit_names, conversion_names
537 float_test_names, compare_cond_names_double, add_cond_names_double,
538 logical_cond_names_double, unit_cond_names_double,
539 branch_push_pop_names, saturation_names, shift_names, mix_names,
540 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
541 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
542 (fput_const): renamed as fput_hex_const
544 - use the macros fputs_filtered and
545 fput_decimal_const whenever possible; calls to sign_extend require
546 2 params -- add a missing second param of 0.
547 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
548 architecture version number of current machine. HP folks are
549 trying to handle situation where the target program was compiled
550 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
552 - added new cases : 'g', 'B', 'm'
553 - added cases specifically for PA 2.0
554 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
555 - calls to fput_const become calls to fput_hex_const
557 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
559 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
560 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
561 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
562 * Makefile.in: Rebuilt.
563 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
565 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
566 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
568 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
570 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
572 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
574 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
576 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
577 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
579 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
581 * fr30-opc.c: Regenerate.
583 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
585 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
587 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
589 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
591 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
593 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
595 1998-11-30 Doug Evans <devans@casey.cygnus.com>
597 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
598 CGEN_INSN_BASE_VALUE.
599 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
600 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
602 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
604 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
606 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
608 * fr30-asm.c,fr30-dis.c: Regenerated.
610 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
612 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
614 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
616 * fr30-opc.c: Regenerated.
618 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
620 * fr30-opc.c: Regenerated.
621 * fr30-opc.h: Regenerated.
622 * fr30-dis.c: Regenerated.
623 * fr30-asm.c: Regenerated.
625 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
627 * mips-opc.c (sync.p,sync.l): Swap insn values.
629 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
631 * fr30-opc.c: Regenerate.
633 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
635 * fr30-opc.c: Regenerated.
636 * fr30-opc.h: Regenerated.
638 1998-11-18 Doug Evans <devans@casey.cygnus.com>
640 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
641 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
643 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
645 * fr30-opc.c: Regenerated.
647 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
649 * fr30-opc.c: Regenerated.
650 * fr30-opc.h: Regenerated.
651 * fr30-dis.c: Regenerated.
652 * fr30-asm.c: Regenerated.
654 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
656 * po/opcodes.pot: Regenerated.
657 * fr30-opc.c: Regenerated.
658 * fr30-opc.h: Regenerated.
659 * fr30-dis.c: Regenerated.
660 * fr30-asm.c: Regenerated.
662 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
664 * disassemble.c (disassembler): Add support for FR30 target.
666 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
668 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
669 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
671 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
673 * po/opcodes.pot: Regenerate.
674 * po/POTFILES.in: Regenerate.
675 * fr30-opc.c: Regenerate.
676 * fr30-opc.h: Regenerate.
678 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
680 * m32r-asm.c: Regenerate.
682 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
684 * configure.in: Added case for bfd_fr30_arch.
685 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
686 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
687 (CLEANFILES): Added stamp-fr30.
689 * fr30-asm.c: New file.
690 * fr30-dis.c: New file.
691 * fr30-opc.c: New file.
692 * fr30-opc.h: New file.
693 * po/POTFILES.in: Regenerated
694 * po/opcodes.pot: Regenerated
696 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
698 * configure.in: detect cygwin* instead of cygwin32*
699 * configure: regenerate
701 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
703 * mips-opc.c (IS_M): Added.
705 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
707 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
709 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
711 * m32r-opc.h,m32r-opc.c: Regenerate.
713 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
715 * i386-dis.c (OP_3DNowSuffix): New static function.
718 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
719 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
720 (insn_codep): New static variable.
721 (print_insn_x86): Init insn_codep after prefixes.
722 (grps): Add GRP14 entries for prefetch, prefetchw.
725 From Jeff B Epler <jepler@usgs.gov>
726 * i386-dis.c (Suffix3DNow): New table.
728 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
730 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
732 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
734 * d10v-dis.c (print_operand): If num is nonzero, then
735 add OPERAND_ACC1, not OPERAND_ACC0.
737 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
739 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
742 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
744 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
747 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
749 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
751 1998-09-09 Michael Meissner <meissner@cygnus.com>
753 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
756 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
758 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
760 (print_insn_little_arm): Detect Thumb symbols in elf object
763 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
765 * alpha-dis.c (print_insn_alpha): Use the machine type to
766 decide which PALcode set to include.
768 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
770 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
772 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
774 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
775 MSUB and MSUBS instructions.
777 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
779 * ppc-opc.c (powerpc_operands): Omit parens around additions in
782 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
784 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
785 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
786 +, -, and d for ColdFire.
788 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
789 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
790 (extract_mbe): Likewise.
792 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
794 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
796 * m10300-opc.c: First cut at UDF instructions.
798 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
800 * m32r-opc.c: Regenerate (remove semantic descriptions).
802 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
804 * arm-dis.c (print_insn_big_arm): Fix indentation.
805 (print_insn_little_arm): Likewise.
807 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
809 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
811 (print_insn_little_arm): Likewise.
813 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
815 Move all global state data into opcode table struct, and treat
816 opcode table as something that is "opened/closed".
817 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
818 (cgen_asm_init): Delete.
819 (cgen_set_parse_operand_fn): New function.
820 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
821 (cgen_dis_init): Delete.
822 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
823 (cgen_current_{opcode_table_mach,endian}): Delete.
824 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
826 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
828 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
831 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
833 * m10300-opc.c: Add entries for "no_match_operands" field in
836 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
838 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
840 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
842 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
844 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
846 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
848 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
850 (OP_J): Remove unnecessary subtraction when 16-bit displacement
851 will be masked later.
853 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
855 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
857 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
859 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
861 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
863 * m10300-dis.c: Only recognize instructions from the currently
865 * m10300-opc.c: Add field indicating the particular variant of
866 the mn10300 each instruction is available on.
868 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
870 * configure.in: For bfd_vax_arch, build vax-dis.lo.
871 * Makefile.am: Rebuild dependencies.
872 (CFILES): Add vax-dis.c.
873 (ALL_MACHINES): Add vax-dis.lo.
874 * aclocal.m4: Rebuild with current libtool.
875 * configure, Makefile.in: Rebuild.
877 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
879 * vax-dis.c: New file, from work by Pauline Middelink
880 <middelin@polyware.iaf.nl>.
881 * disassemble.c (ARCH_vax): Define if ARCH_all.
882 (disassembler): Add case for ARCH_vax.
883 * makefile.vms: Support compilation on vms/vax.
885 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
887 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
888 related to sign extension and the size of ints.
890 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
892 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
893 instructions. Support (sp) addressing mode by expanding it into
896 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
898 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
900 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
902 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
904 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
906 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
909 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
911 * mips-dis.c (print_insn_little_mips): Previously, instruction
912 printing references the symbol table to determine whether the
913 instruction resides in a block regular instructions or mips16
914 instructions. However, when the disassembler gets used in other
915 environments where the symbol table is not present, we no longer
916 rely in the symbol table, rather, use the low bit of the
917 instructions address to guess. There should be no change for usage
918 of the disassembler in host based programs, gdb, objdump.
919 (print_insn_big_mips): ditto.
920 (print_insn_mips): ditto
922 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
924 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
926 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
928 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
930 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
932 * i386-dis.c (index16): Add '%' to register names. Use ','
935 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
937 * i386-dis.c: Don't print opcode suffix when we can figure out the
938 size (and gas can!) by register operands, or from the default
940 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
942 (dis386, dis386_twobyte, grps): Use new suffix macros.
943 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
944 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
945 order of cmps operands to agree with Intel docs. Correct operand
946 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
947 agree with Intel docs.
948 (print_insn_x86): Print orphan fwait before other prefixes.
949 Return correct byte count for orphan fwait with prefixes. Don't
950 print `bound' operands in reverse order.
951 (ckprefix): Stop accumulating prefixes if we get fwait.
952 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
954 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
956 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
957 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
959 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
961 Fix problems when bfd_vma is wider than long.
962 * i386-dis.c: Make op_address and start_pc unsigned.
963 (set_op): Make parameter unsigned.
964 (print_insn_x86): Cast to bfd_vma when passing a value to
966 * ns32k-dis.c (CORE_ADDR): Don't define.
967 (print_insn_ns32k): Change type of addr to bfd_vma. Use
968 bfd_scan_vma to read back address.
969 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
971 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
972 (NEXTULONG): New definition.
973 (print_insn_m68k): Avoid overflow when computing third argument of
975 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
976 Use disp instead of val to store offset values.
977 (print_indexed): Use base_disp instead of word to store base
978 displacement, to avoid overflow.
979 * m10300-dis.c (disassemble): Cast value to long when computing
980 pc-relative address, to get correct sign extension.
982 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
984 * m32r-opc.c: Regenerate.
986 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
988 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
989 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
991 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
993 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
995 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
997 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
999 (OP_DSreg): Rename from OP_DSSI.
1000 (OP_ESreg): Rename from OP_ESDI.
1001 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
1003 (append_seg): Rename from append_prefix.
1004 (ptr_reg): New function.
1005 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
1007 (PREFIX_ADDR): Rename from PREFIX_ADR.
1008 (float_reg): Add non-broken opcodes for people who don't want
1011 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1013 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
1016 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
1018 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
1020 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
1022 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
1023 0; produce error message for shifts of size 32 (or 64 for 64-bit
1024 shifts), because the hardware doesn't support them.
1026 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1028 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1029 LONG_2, LONG_2b formats to use this new operand.
1031 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1033 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1035 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1037 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1038 endian data support.
1040 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1042 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1043 and SHORT_B3b formats to use Rb instead of Ra.
1045 Add FLAG_MUL16 to MUL2XH opcode.
1047 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1048 to existing 1.1.1 parallelisation prohibition procedure.
1050 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1052 * m32r-asm.c,m32r-dis.c: Regenerate.
1054 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1056 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1057 with a shift count of 0.
1059 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1061 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1062 (cgen_hw_lookup_by_num): New function.
1064 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1066 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1068 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1070 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1071 as big-endian on SPARClite.
1073 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1075 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1077 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1079 * po/Make-in (install-info): New target.
1081 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1083 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1084 * configure: Rebuild.
1086 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1088 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1089 variety of ISA2 instructions to set bottom ten bits of trap code.
1091 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1093 * Makefile.am (config.status): Add explicit target so that
1094 config.status depends upon bfd/configure.in.
1095 * Makefile.in: Rebuild.
1097 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1099 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1100 instructions to set bottom ten bits of break code.
1101 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1102 for above optional argument.
1104 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1106 * makefile.vms: Run dec c with /nodebug.
1108 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1110 * Makefile.in: Rebuilt.
1111 * Makefile.am: Regenerated dependencies with mkdep.
1113 * opintl.h (_): Define as dgettext.
1115 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1117 * cgen-asm.c: Internationalised.
1118 * m32r-asm.c: Internationalised.
1119 * m32r-dis.c: Internationalised.
1120 * m32r-opc.c: Internationalised.
1122 * aclocal.m4: Regenerated.
1123 * configure: Regenerated.
1124 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1125 * Makefile.in: Rebuild.
1126 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1127 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1129 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1131 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1133 * aclocal.m4, configure: Rebuild with current tools.
1135 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1137 * opintl.h: New file - contains internationalisation macros used
1138 by source files in this directory.
1139 * po/: New subdirectory - contains internationalisation files.
1140 * po/Make-in: New file - Makefile constructor.
1141 * po/POTFILES.in: New file - list of files in opcodes directory
1142 that should be scan for internationalisation macros.
1143 * po/opcodes.pot: New file - list of internationisation strings
1144 found in files mentioned in po/POTFILES.in.
1145 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1146 entry. Add intl directory to include paths.
1147 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1148 HAVE_STRCPY, HAVE_LC_MESSAGES
1149 * configure.in: Add rule to build Makefile in po subdirectory.
1150 * Makefile.in: Rebuilt.
1151 * aclocal.m4: Rebuilt.
1152 * config.in: Rebuilt.
1153 * configure: Rebuilt.
1154 * alpha-opc.c: Internationalised.
1155 * arc-dis.c: Internationalised.
1156 * arc-opc.c: Internationalised.
1157 * arm-dis.c: Internationalised.
1158 * cgen-asm.c: Internationalised.
1159 * d30v-dis.c: Internationalised.
1160 * dis-buf.c: Internationalised.
1161 * h8300-dis.c: Internationalised.
1162 * h8500-dis.c: Internationalised.
1163 * i386-dis.c: Internationalised.
1164 * m10200-dis.c: Internationalised.
1165 * m10300-dis.c: Internationalised.
1166 * m68k-dis.c: Internationalised.
1167 * m88k-dis.c: Internationalised.
1168 * mips-dis.c: Internationalised.
1169 * ns32k-dis.c: Internationalised.
1170 * opintl.h: Internationalised.
1171 * ppc-opc.c: Internationalised.
1172 * sparc-dis.c: Internationalised.
1173 * v850-dis.c: Internationalised.
1174 * v850-opc.c: Internationalised.
1176 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1178 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1179 (asm_hash_table_entries): New variable.
1180 (cgen_asm_init): Free asm_hash_table_entries.
1181 (hash_insn_array,hash_insn_list): New functions.
1182 (build_asm_hash_table): Use them. Hash macro insns as well.
1183 (cgen_asm_lookup_insn): Update.
1184 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1185 (dis_hash_table_entries): New variable.
1186 (cgen_dis_init): Free dis_hash_table_entries.
1187 (hash_insn_array,hash_insn_list): New functions.
1188 (build_dis_hash_table): Use them. Hash macro insns as well.
1189 (cgen_dis_lookup_insn): Update.
1190 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1191 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1192 (cgen_macro_insn_count): New function.
1193 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1195 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1197 * i386-dis.c (OP_DSSI): Print segment override.
1199 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1201 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1204 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1206 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1207 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1208 * configure.in: Define and substitute WIN32LDFLAGS and
1210 * aclocal.m4: Rebuild with new libtool.
1211 * configure, Makefile.in: Rebuild.
1213 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1215 * m32r-opc.c: Regenerate.
1217 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1219 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1220 before trying to copy it.
1221 * Makefile.in: Rebuild.
1223 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1225 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1227 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1229 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1230 from an arbitrary valid buffer instead of fetching them on demand
1232 (invalid_float): use bit_extract_simple() instead of bit_extract().
1234 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1236 From H.J. Lu <hjl@gnu.org>:
1237 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1240 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1242 * Branched binutils 2.9.
1244 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1246 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1247 disassembling last 4 bytes of a section.
1249 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1251 Fix some gcc -Wall warnings:
1252 * arc-dis.c (print_insn): Add casts to avoid warnings.
1253 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1254 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1255 * m10200-dis.c (disassemble): Likewise.
1256 * m10300-dis.c (disassemble): Likewise.
1257 * ns32k-dis.c (print_insn_ns32k): Likewise.
1258 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1259 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1260 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1261 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1262 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1263 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1264 * tic80-dis.c (print_one_instruction): Likewise.
1265 * w65-dis.c (print_operand): Likewise.
1266 * z8k-dis.c (fetch_data): Likewise.
1267 * a29k-dis.c: Add return type for find_byte_func_type.
1268 * arc-opc.c: Include <stdio.h>. Remove declarations of
1269 insert_multshift and extract_multshift.
1270 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1272 (extract_value): Fully parenthesize expression.
1273 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1274 * h8500-opc.h (h8500_table): Fully bracket initializer.
1275 * w65-opc.h (optable): Likewise.
1276 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1277 * i386-dis.c (OP_E): Initialize local variables.
1278 * m10200-dis.c (print_insn_mn10200): Likewise.
1279 * mips-dis.c (print_insn_mips16): Likewise.
1280 * sh-dis.c (print_insn_shx): Likewise.
1281 * v850-dis.c (print_insn_v850): Likewise.
1282 * ns32k-dis.c (print_insn_arg): Declare.
1283 (get_displacement, invalid_float): Declare.
1284 (list_search, sign_extend, flip_bytes): Declare return type.
1285 (get_displacement): Likewise.
1286 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1288 (print_insn_ns32k): Make i unsigned.
1289 (invalid_float): Make static. Declare type of val.
1290 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1291 on each for iteration.
1292 * tic30-dis.c (get_indirect_operand): Likewise.
1293 * z8k-dis.c (print_insn_z8001): Declare return type.
1294 (print_insn_z8002): Likewise.
1295 (unparse_instr): Fix sprintf format strings.
1297 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1299 * mips-opc.c: Add "sync.l" and "sync.p".
1301 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1303 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1304 default m68k variant to recognize.
1306 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1307 (ctrl, cobr, mem, ea): Likewise.
1308 (print_addr): Likewise. Remove cast.
1309 (ea): Cast argument of print_addr to bfd_vma.
1311 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1313 (cgen_parse_unsigned_integer): Likewise.
1314 (cgen_parse_address): Likewise.
1316 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1318 * i960-dis.c (ctrl): Add full braces to structure initialization.
1319 (cobr, mem, reg): Likewise.
1320 (ea): Correct parenthesization in expression.
1322 * cgen-asm.c: Include <ctype.h>.
1323 (build_asm_hash_table): Remove unused local variable i.
1324 (cgen_parse_keyword): Add casts to avoid warnings.
1326 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1327 symbol. Fix indentation.
1328 (print_insn_little_arm): Likewise.
1330 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1332 * configure.in: Use AM_DISABLE_SHARED.
1333 * aclocal.m4, configure: Rebuild with libtool 1.2.
1335 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1337 These patches are courtesy of Jonathan Walton and Tony Thompson
1338 (athompso@cambridge.arm.com).
1340 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1343 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1344 both the offset and the label closest to the destination.
1346 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1348 * m32r-opc.h: Regenerate.
1350 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1352 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1354 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1356 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1357 assume that info->symbols is non-empty.
1359 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1361 * alpha-opc.c (cvtqs) There is no such thing.
1362 (cvttq): Missing most of the /*d variants.
1364 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1366 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1367 delayed branches or jumps.
1369 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1371 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1373 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1374 * tic30-dis.c (print_branch): Likewise.
1376 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1378 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1379 saved_symbol code as it is no longer needed.
1381 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1383 * cgen-asm.c: Include symcat.h.
1384 * cgen-dis.c,cgen-opc.c: Ditto.
1385 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1387 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1389 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1391 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1393 * m32r-opc.[ch]: Regenerate.
1395 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1397 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1398 arguments. Don't perform validation here.
1399 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1401 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1403 * m32r-opc.c: Regenerate.
1405 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1407 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1408 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1410 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1412 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1414 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1416 * configure.in: Get the version number from BFD.
1417 * configure: Rebuild.
1419 From H.J. Lu <hjl@gnu.org>:
1420 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1421 * Makefile.in: Rebuild.
1423 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1425 * m32r-opc.c: Regenerate.
1426 * m32r-opc.h: Regenerate.
1428 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1430 * m32r-opc.c: Regenerate.
1432 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1434 Fix rac to accept only a0:
1435 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1436 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1437 Introduce OPERAND_GPR.
1438 * d10v-dis.c (print_operand): Likewise.
1440 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1442 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1443 (cgen_hw_lookup): Make result const.
1444 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1446 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1448 * configure, aclocal.m4: Rebuild with new libtool.
1450 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1452 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1453 instructions use a PC relative branch, not absolute.
1455 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1457 * configure.in: Set libtool_enable_shared rather than
1458 libtool_shared. Remove diversion hack.
1459 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1461 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1463 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1464 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1466 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1468 * tic30-dis.c: New file.
1469 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1470 * configure.in: Handle bfd_tic30_arch.
1471 * Makefile.am: Rebuild dependencies.
1472 (CFILES): Add tic30-dis.c
1473 (ALL_MACHINES): Add tic30-dis.lo.
1474 * configure, Makefile.in: Rebuild.
1476 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1478 * m32r-opc.h (HAVE_CPU_M32R): Define.
1480 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1482 * v850-opc.c (insertion routines): If both alignment and size is
1483 wrong then report this.
1485 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1487 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1488 Only recognize instructions for the current target_processor.
1490 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1492 * d10v-dis.c (PC_MASK): Correct value.
1493 (print_operand): If there's a reloc, don't calculate the
1494 address because they could be in different sections.
1496 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1498 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1499 instruction after the 4650's "mul" instruction; nobody's using the
1500 4010 these days. If object files someday indicate which processor
1501 variant they're intended for, we can do a better job at this.
1503 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1505 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1506 table provided entry size. Use CGEN_INSN_MNEMONIC.
1507 (cgen_parse_keyword): Rewrite.
1508 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1509 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1510 * cgen-opc.c: Clean up pass over `struct foo' usage.
1511 (cgen_keyword_lookup_value): Handle "" entry.
1512 (cgen_keyword_add): Likewise.
1514 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1516 * mips-opc.c: Add FP_D to s.d instruction flags.
1518 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1520 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1522 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1524 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1525 PC relative offset forms before the 15 bit forms. An assembler command
1526 line option now chooses the default.
1528 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1530 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1531 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1533 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1535 * configure: Only build libopcodes shared if --enable-shared's value
1536 was `yes', or was set to `*opcodes*'.
1537 * aclocal.m4: Likewise.
1538 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1539 original source of this bit of code. It's not clear what the best fix
1542 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1544 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1545 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1546 offset forms before the 15 bit forms, to default to the long forms.
1548 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1550 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1552 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1554 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1555 symbol if none is present.
1556 (print_insn_big_arm): Prevent examination of stored symbol if
1559 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1561 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1563 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1565 * disassemble.c: Remove disasm_symaddr() function.
1567 * arm-dis.c: Use info->symbol instead of info->flags to determine
1568 if disassmbly should be in Thumb or Arm mode.
1570 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1572 * arm-dis.c: Add support for disassembling Thumb opcodes.
1573 (print_insn_thumb): New function.
1575 * disassemble.c (disasm_symaddr): New function.
1577 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1578 (thumb_opcodes): Table of Thumb opcodes.
1580 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1582 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1584 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1585 and 'v' as operand types.
1587 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1589 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1590 <olivier.carmona@di.epfl.ch>.
1591 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1592 which has a two word opcode with a one word argument.
1594 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1596 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1597 unsigned, not signed.
1598 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1600 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1602 * d10v-dis.c (print_operand):
1603 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1605 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1607 * d10v-opc.c (OPERAND_FLAG): Split into:
1608 (OPERAND_FFLAG, OPERAND_CFLAG) .
1612 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1614 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1615 field for all INSN_MACRO's.
1616 * mips16-opc.c: same
1618 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1620 * mips-opc.c (sync,cache): These are 3900 insns.
1622 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1624 sh-opc.h (sh_table): Remove ftst/nan.
1626 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1628 * mips-opc.c (ffc, ffs): Fix mask.
1630 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1632 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1635 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1637 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1638 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1640 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1642 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1643 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1645 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1647 * v850-dis.c (disassemble): Replace // with /* ... */
1649 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1651 * sparc-opc.c: Add wr & rd for v9a asr's.
1652 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1653 (v9a_asr_reg_names): New variable.
1654 Patch from David Miller <davem@vger.rutgers.edu>.
1656 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1658 * sparc-opc.c (v9notv9a): New insn type.
1659 (IMPDEP): Move to the end to not conflict with edge8 et al.
1660 Patch from David Miller <davem@vger.rutgers.edu>.
1662 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1664 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1666 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1668 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1670 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1672 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1673 of disassemble_info structure to determine if an overlay address
1674 has a matching symbol in low memory.
1676 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1677 new symbol_at_address_func field in disassemble_info structure.
1679 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1681 * v850-opc.c (extract_d22): Use signed arithmatic.
1683 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1685 * mips-opc.c: Three op mult is not an ISA insn.
1687 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1689 * mips-opc.c: Fix formatting.
1691 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1693 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1694 than assuming that char is signed. Explicitly sign extend 16 bit
1695 values, rather than assuming that short is 16 bits.
1696 (OP_sI, OP_J, OP_DIR): Likewise.
1698 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1700 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1703 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1705 * v850-opc.c: Fix typo in comment.
1707 * v850-dis.c (disassemble): Add test of processor type when
1708 determining opcodes.
1710 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1712 * configure.in: Use a diversion to set enable_shared before the
1713 arguments are parsed.
1714 * configure: Rebuild.
1716 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1718 * m68k-opc.c (TBL1): Use ! rather than `.
1719 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1721 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1723 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1725 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1727 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1730 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1731 * aclocal.m4: Rebuild with new libtool.
1732 * configure: Rebuild.
1734 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1736 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1738 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1740 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1742 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1744 * v850-opc.c (v850_opcodes): Further rearrangements.
1746 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1748 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1750 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1752 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1755 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1757 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1759 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1761 * v850-opc.c: Initialise processors field of v850_opcode structure.
1763 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1765 Merge changes from Martin Hunt:
1767 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1769 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1770 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1771 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1773 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1775 * d30v-dis.c (print_insn): First operand of d*i (delayed
1776 branch) instructions is relative.
1778 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1779 (d30v_operand_table): Add IMM6S3 type.
1780 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1782 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1783 and cmp instructions.
1785 * d30v-opc.c: Correct entries for repeat*, and sat*.
1786 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1787 types. Correct several formats.
1789 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1791 * d30v-opc.c (pre_defined_registers): Change control registers.
1793 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1794 SHORT_C2. Manual was incorrect.
1796 * d30v-dis.c (lookup_opcode): Return value now indicates
1797 if an opcode has a short and a long form. Used for deciding
1798 to append a ".s" or ".l".
1799 (print_insn): Append a ".s" to an instruction if it is
1800 the short form and ".l" if it is a long form. Do not append
1801 anything if the instruction has only one possible size.
1803 * d30v-opc.c: Change mulx2h to require an even register.
1804 New form: SHORT_A2; a SHORT_A form that needs an even
1805 register as the first operand.
1807 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1808 instruction was not being disassembled if there were an odd
1809 number of instructions.
1811 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1813 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1815 * v850-dis.c (disassemble): Improved display of register lists.
1817 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1819 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1820 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1821 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1822 fandnot1s, fandnot2s.
1824 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1826 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1828 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1830 * cgen-asm.c (cgen_parse_address): New argument resultp.
1831 All callers updated.
1832 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1834 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1836 * mn10200-dis.c (disassemble): PC relative instructions are
1837 relative to the next instruction, not the current instruction.
1839 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1841 * v850-dis.c (disassemble): Only signed extend values that are not
1842 returned by extract functions.
1843 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1845 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1847 * v850-opc.c: Update comments. Remove use of
1848 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1850 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1852 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1854 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1856 * configure: Rebuilt with latest devo autoconf for NT support.
1858 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1860 * v850-dis.c (disassemble): Use curly brace syntax for register
1863 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1864 where r0 is being used as a destination register.
1866 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1868 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1870 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1872 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1874 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1876 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1877 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1880 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1882 * configure (cgen_files): Add support for v850e target.
1883 * configure.in (cgen_files): Add support for v850e target.
1885 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1887 * configure (cgen_files): Add support for v850ea target.
1888 * configure.in (cgen_files): Add support for v850ea target.
1890 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1892 * configure.in (bfd_arc_arch): Add.
1893 * configure: Rebuild.
1894 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1895 * Makefile.in: Rebuild.
1896 * arc-dis.c, arc-opc.c: New files.
1897 * disassemble.c (ARCH_all): Define ARCH_arc.
1898 (disassembler): Add ARC support.
1900 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1902 * v850-dis.c (disassemble): Add support for v850EA instructions.
1904 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1905 (v850_opcodes): Add v850EA instructions.
1907 * v850-dis.c (disassemble): Add support for v850E instructions.
1909 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1910 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1911 insert_spe, extract_spe): New Functions.
1912 (v850_opcodes): Add v850E instructions.
1914 * v850-opc.c: Reorganised and re-layed out to improve readability
1917 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1919 * configure: Rebuild with autoconf 2.12.1.
1921 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1923 * aclocal.m4, configure: Rebuild with new automake patches.
1925 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1927 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1928 * acinclude.m4: Just include acinclude.m4 from BFD.
1929 * aclocal.m4, configure: Rebuild.
1931 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1933 * Makefile.am: New file, based on old Makefile.in.
1934 * acconfig.h: New file.
1935 * acinclude.m4: New file.
1936 * stamp-h.in: New file.
1937 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1938 Removed shared library handling; now handled by libtool. Replace
1939 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1940 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1941 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1942 handling in AC_OUTPUT.
1943 * dep-in.sed: Change .o to .lo.
1944 * Makefile.in: Now built with automake.
1945 * aclocal.m4: Now built with aclocal.
1946 * config.in, configure: Rebuild.
1948 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1950 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1952 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1954 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1956 * sparc-dis.c (sorted_opcodes): New static local.
1957 (struct opcode_hash): `opcode' is pointer to const element.
1958 (build_hash): First arg is now table of sorted pointers.
1959 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1960 (compare_opcodes): Update.
1962 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1964 * cgen-opc.c: #include <ctype.h>.
1965 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1966 Handle case insensitive hashing.
1967 (hash_keyword_value): Change type of `value' to unsigned int.
1969 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1971 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1972 precision FP, mark it as such. Likewise for double precision
1973 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1976 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1978 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1980 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1981 nesting depth when all the macros are expanded.
1983 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1985 * sparc-opc.c: The fcmp v9a instructions take an integer register
1986 as a destination, not a floating point register. From Christian
1987 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1989 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1991 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1992 syntax. From Roman Hodek
1993 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1995 * i386-dis.c (twobyte_has_modrm): Fix pand.
1997 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1999 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2001 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2003 * arm-dis.c: Add prototypes for arm_decode_shift and
2006 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2008 * mips-opc.c: Add r3900 insns.
2010 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2012 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2013 print delay slot instructions on the same line. When using a PC
2014 relative load, add a comment with the value being loaded if it can
2017 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2019 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2020 to pushS/popS for segment regs and byte constant so that
2021 pushw/popw printed when in 16 bit data mode.
2023 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2024 print cbtw, cwtd in 16 bit data mode.
2025 * i386-dis.c (putop): extra case W to support above.
2027 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2028 address size prefix in 16 bit address mode.
2030 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2032 * sh-dis.c: Reindent. Rename local variable fprintf to
2035 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2037 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2039 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2041 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2043 * mips16-opc.c (mip16_opcodes): same.
2045 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2047 * m68k-opc.c (moveb): Change $d to %d.
2049 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2051 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2052 (twobyte_has_modrm): Likewise.
2054 (OP_MMX, OP_EM, OP_MS): New static functions.
2056 * i386-dis.c: Revert patch of April 4. The output now matches
2059 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2061 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2064 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2066 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2068 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2070 * Makefile.in (install): Depend upon installdirs.
2071 (installdirs): New target.
2073 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2075 From Thomas Graichen <graichen@rzpd.de>:
2076 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2077 * configure: Rebuild.
2079 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2081 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2082 Delete string{,s}.h support.
2084 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2086 * cgen-asm.c (cgen_parse_operand_fn): New global.
2087 (cgen_parse_{{,un}signed_integer,address}): Update call to
2088 cgen_parse_operand_fn.
2089 (cgen_init_parse_operand): New function.
2090 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2091 from cgen_asm_init_parse.
2092 (m32r_cgen_assemble_insn): New operand `errmsg'.
2093 Delete call to as_bad, return error message to caller.
2094 (m32r_cgen_asm_hash_keywords): #if 0 out.
2096 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2098 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2100 [case 'J']: Fix typo in register name.
2102 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2104 * configure.in: Substitute SHLIB_LIBS.
2105 * configure: Rebuild.
2106 * Makefile.in (SHLIB_LIBS): New variable.
2107 ($(SHLIB)): Use $(SHLIB_LIBS).
2109 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2111 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2113 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2115 * disassemble.c (disassembler): Handle m32r.
2117 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2119 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2120 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2121 * Makefile.in (CFILES): Add them.
2122 (ALL_MACHINES): Add them.
2123 (dependencies): Regenerate.
2124 * configure.in (cgen_files): New variable.
2125 (bfd_m32r_arch): Add entry.
2126 * configure: Regenerate.
2128 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2130 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2131 * configure: Rebuild.
2133 * Makefile.in: Rebuild dependencies.
2135 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2137 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2140 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2142 * Branched binutils 2.8.
2144 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2146 * m10200-dis.c: Rename from mn10200-dis.c.
2147 * m10200-opc.c: Rename from mn10200-opc.c.
2148 * m10300-dis.c: Rename from mn10300-dis.c
2149 * m10300-opc.c: Rename from mn10300-opc.c.
2150 * Makefile.in: Update accordingly.
2152 * mips16-opc.c: Add mul and dmul macros.
2154 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2156 * makefile.vms: Update CFLAGS, add clean target.
2158 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2160 * mips-opc.c: Add "wait". From Ralf Baechle
2161 <ralf@gnu.ai.mit.edu>.
2163 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2164 * configure, config.in: Rebuild.
2165 * sysdep.h: Include <stdlib.h> if it exists.
2166 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2168 * Makefile.in: Rebuild dependencies.
2170 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2172 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2173 Andrew Bray <andy@madhouse.demon.co.uk>.
2175 * mips-opc.c: Add cast when setting mips_opcodes.
2177 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2179 * v850-dis.c (disassemble): Fix sign extension problem.
2180 * v850-opc.c (extract_d*): Fix sign extension problems to make
2181 disassembly calculate branch offsets correctly.
2183 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2185 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2187 * mips-opc.c: Add dctr and dctw.
2189 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2191 * d30v-dis.c (print_insn): Change the way signed constants
2194 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2196 * Makefile.in (BFD_H): New variable.
2197 (HFILES): New variable.
2198 (CFILES): Add all C files.
2199 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2200 Delete old dependencies, and build new ones.
2201 * dep-in.sed: New file.
2203 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2205 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2207 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2209 * mn10200-opc.c: Change "trap" to "syscall".
2210 * mn10300-opc.c: Add new "syscall" instruction.
2212 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2214 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2215 mulul insns on the coldfire.
2217 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2219 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2220 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2221 (print_insn_little_arm): Likewise.
2223 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2225 Based on patches from H.J. Lu <hjl@lucon.org>:
2226 * i386-dis.c (fetch_data): Add prototype.
2227 * m68k-dis.c (fetch_data): Add prototype.
2228 (dummy_print_address): Add prototype. Make static.
2229 * ppc-opc.c (valid_bo): Add prototype.
2230 * sparc-dis.c (build_hash_table): Add prototype.
2231 (is_delayed_branch, compute_arch_mask): Add prototypes.
2232 (print_insn_sparc): Make several local variables const.
2233 (compare_opcodes): Change arguments to const PTR. Add prototype.
2234 * sparc-opc.c (arg): Change name field to be const.
2235 (lookup_name, lookup_value): Add prototypes. Change table and
2236 name parameters to be const.
2237 (sparc_encode_asi): Change name parameter to be const.
2238 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2239 (sparc_encode_sparclet_cpreg): Likewise.
2240 (sparc_decode_asi): Change return type to be const.
2241 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2242 (sparc_decode_sparclet_cpreg): Likewise.
2244 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2246 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2247 Solaris doesn't like the combined options, and the -f is
2249 (stamp-tshlink, install): Likewise.
2251 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2253 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2256 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2258 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2260 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2262 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2265 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2267 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2269 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2271 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2273 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2275 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2277 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2279 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2280 floatformat_to_double to make portable.
2281 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2284 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2286 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2287 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2289 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2291 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2292 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2294 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2296 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2297 (OFF_SL_BR_SCALED): ... to this, and added the flag
2298 TIC80_OPERAND_BASEREL to the flags word.
2299 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2302 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2304 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2305 Change mips_opcodes from const array to a pointer,
2306 and change bfd_mips_num_opcodes from const int to int,
2307 so that we can increase the size of the mips opcodes table
2310 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2312 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2313 store BITNUM values in the table in one's complement form
2314 to match behavior when assembler is given a raw numeric
2315 value for a BITNUM operand.
2316 * tic80-dis.c (print_operand_bitnum): Ditto.
2318 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2320 * d30v-opc.c: Removed references to FLAG_X.
2322 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2324 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2326 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2328 * Makefile.in: Added d30v object files.
2329 * configure: (bfd_d30v_arch) Rebuilt.
2330 * configure.in: (bfd_d30v_arch) Added new case.
2331 * d30v-dis.c: New file.
2332 * d30v-opc.c: New file.
2333 * disassemble.c (disassembler) Add entry for d30v.
2335 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2337 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2338 representations for the floating point BITNUM values.
2340 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2342 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2343 in the table in one's complement form, as they appear in the
2345 (tic80_symbol_to_value): Use macros to access predefined
2347 (tic80_value_to_symbol): Ditto.
2348 (tic80_next_predefined_symbol): New function.
2349 * tic80-dis.c (print_operand_bitnum): Remove code that did
2350 one's complement for BITNUM values.
2352 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2354 * makefile.vms: Remove 8 bit characters. Update to latest
2357 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2359 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2361 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2363 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2364 (IMM24_PCREL): Likewise.
2366 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2368 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2369 address for an extended PC relative instruction that is not a
2372 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2374 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2377 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2379 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2380 (tic80_opcodes): Sort entries so that long immediate forms
2381 come after short immediate forms, making it easier for
2382 assembler to select the right one for a given operand.
2384 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2386 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2388 (print_insn_mips16): Likewise.
2390 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2392 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2393 a symbol class that restricts translation to just that
2394 class (general register, condition code, etc).
2396 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2398 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2399 and REG_DEST_E for register operands that have to be
2400 an even numbered register. Add REG_FPA for operands that
2401 are one of the floating point accumulator registers.
2402 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2403 (tic80_opcodes): Change entries that need even numbered
2404 register operands to use the new operand table entries.
2405 Add "or" entries that are identical to "or.tt" entries.
2407 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2409 * mips16-opc.c: Add new cases of exit instruction for
2411 * mips-dis.c (print_mips16_insn_arg): Display floating point
2412 registers in operands of exit instruction. Print `$' before
2413 register names in operands of entry and exit instructions.
2415 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2417 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2418 pairs for all predefined symbols recognized by the assembler.
2419 Also used by the disassembling routines.
2420 (tic80_symbol_to_value): New function.
2421 (tic80_value_to_symbol): New function.
2422 * tic80-dis.c (print_operand_control_register,
2423 print_operand_condition_code, print_operand_bitnum):
2424 Remove private tables and use tic80_value_to_symbol function.
2426 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2428 * d10v-dis.c (print_operand): Change address printing
2429 to correctly handle PC wrapping. Fixes PR11490.
2431 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2433 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2436 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2438 * mips-dis.c (print_insn_mips16): Set insn_info information.
2439 (print_mips16_insn_arg): Likewise.
2441 * mips-dis.c (print_insn_mips16): Better handling of an extend
2442 opcode followed by an instruction which can not be extended.
2444 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2446 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2447 coldfire moveb instruction to not allow an address register as
2448 destination. Although the documentation does not indicate that
2449 this is invalid, experiments uncovered unexpected behavior.
2450 Added a comment explaining the situation. Thanks to Andreas
2451 Schwab for pointing this out to me.
2453 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2455 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2456 entries are presorted so that entries with the same mnemonic are
2457 adjacent to each other in the table. Sort the entries for each
2458 instruction so that this is true.
2460 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2462 * m68k-dis.c: Include <libiberty.h>.
2463 (print_insn_m68k): Sort the opcode table on the most significant
2464 nibble of the opcode.
2466 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2468 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2469 "vsub", "vst", "xnor", and "xor" instructions.
2470 (V_a1): Renamed from V_a, msb of accumulator reg number.
2471 (V_a0): Add macro, lsb of accumulator reg number.
2473 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2475 * tic80-dis.c (print_insn_tic80): Broke excessively long
2476 function up into several smaller ones and arranged for
2477 the instruction printing function to be callable recursively
2478 to print vector instructions that have both a load and a
2479 math instruction packed into a single opcode.
2480 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2481 to explain why it comes after the other vector opcodes.
2483 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2485 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2486 move insns to handle immediate operands.
2488 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2490 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2491 fix operand mask in the "moveml" entries for the coldfire.
2493 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2495 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2496 New macros for building vector instruction opcodes.
2497 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2498 FMT_LI, which were unused. The field is now a flags field.
2499 Remove some opcodes that are possible, but illegal, such
2500 as long immediate instructions with doubles for immediate
2501 values. Add "vadd" and "vld" instructions.
2503 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2505 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2506 the order more logical. Move the shift alias instructions ("rotl",
2507 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2508 interspersed with the regular sr.x and sl.x instructions. Add
2509 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2510 "sub", "subu", "swcr", and "trap".
2512 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2514 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2515 (OFF_SL_PC): Renamed from OFF_SL.
2516 (OFF_SS_BR): New operand type for base relative operand.
2517 (OFF_SL_BR): New operand type for base relative operand.
2518 (REG_BASE): New operand type for base register operand.
2519 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2520 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2521 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2523 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2524 10 char field, padded with spaces on rhs, rather than a string
2525 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2526 than old TIC80_OPERAND_RELATIVE. Add support for new
2527 TIC80_OPERAND_BASEREL flag bit.
2529 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2531 * tic80-dis.c (print_insn_tic80): Print floating point operands
2533 * tic80-opc.c (SPFI): Add single precision floating point
2534 immediate operand type.
2535 (ROTATE): Add rotate operand type for shifts.
2536 (ENDMASK): Add for shifts.
2537 (n): Macro for the 'n' bit.
2538 (i): Macro for the 'i' bit.
2539 (PD): Macro for the 'PD' field.
2540 (P2): Macro for the 'P2' field.
2541 (P1): Macro for the 'P1' field.
2542 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2545 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2547 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2548 adding in current address for pc-relative operands.
2550 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2552 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2553 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2554 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2555 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2556 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2557 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2558 (REG_SCALED, LSI_SCALED): New operand types.
2559 (E): New macro for 'E' bit at bit 27.
2560 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2561 opcodes, including the various size flavors (b,h,w,d) for
2562 the direct load and store instructions.
2564 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2566 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2568 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2569 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2570 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2571 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2572 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2573 masks with "MASK_* & ~M_*" to get the M bit reset.
2574 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2576 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2578 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2579 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2580 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2582 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2583 CC, SICR, and LICR table entries.
2584 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2585 "bcnd", and "brcr" opcodes.
2587 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2589 * ppc-opc.c (powerpc_operands): Make comment match the
2590 actual fields (no shift field).
2591 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2592 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2593 partial implementation, work in progress.
2594 * tic80-opc.c (tic80_operands): Begin construction operands table.
2595 (tic80_opcodes): Continue populating opcodes table and start
2596 filling in the operand indices.
2597 (tic80_num_opcodes): Add this.
2599 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2601 * m68k-opc.c: Add #B case for moveq.
2603 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2605 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2606 before they are used.
2608 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2610 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2611 for "breakpoint" instruction.
2613 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2615 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2616 (dep): Use ALL_CFLAGS rather than CFLAGS.
2618 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2620 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2623 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2625 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2626 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2628 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2630 * mips16-opc.c: Add "abs".
2632 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2634 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2635 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2636 (disassembler): Add bfd_arch_tic80 support to set disassemble
2637 to print_insn_tic80.
2638 * tic80-dis.c (print_insn_tic80): Add stub.
2640 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2642 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2643 * configure: Regenerate with autoconf.
2644 * tic80-dis.c: Add file.
2645 * tic80-opc.c: Add file.
2647 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2649 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2651 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2653 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2654 (mn10200_opcodes): Use it for some logicals and btst insns.
2655 Add "break" and "trap" instructions.
2657 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2659 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2661 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2663 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2664 relative load or add now depends upon whether the instruction is
2667 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2669 * mn10200-dis.c: Finish writing disassembler.
2670 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2671 Fix mask for "jmp (an)".
2673 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2674 handle endianness issues for mn10300.
2676 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2678 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2680 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2681 instruction. Fix opcode field for "movb (imm24),dn".
2683 * mn10200-opc.c (mn10200_operands): Fix insertion position
2686 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2688 * mn10200-opc.c: Create mn10200 opcode table.
2689 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2690 but moving along nicely.
2692 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2694 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2696 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2698 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2699 specifiers for fmovem* instructions.
2701 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2703 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2705 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2707 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2710 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2712 * mn10300-opc.c: Add some comments explaining the various
2715 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2717 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2719 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2722 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2723 operand specifiers in fmovm* instructions.
2725 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2727 * ppc-opc.c (insert_li): Give an error if the offset has the two
2728 least significant bits set.
2730 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2732 * mips-dis.c (print_insn_mips16): Separate the instruction from
2733 the arguments with a tab, not a space.
2735 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2737 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2740 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2743 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2745 * configure: Rebuild with autoconf 2.12.
2747 Add support for mips16 (16 bit MIPS implementation):
2748 * mips16-opc.c: New file.
2749 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2750 (mips16_reg_names): New static array.
2751 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2752 after seeing a 16 bit symbol.
2753 (print_insn_little_mips): Likewise.
2754 (print_insn_mips16): New static function.
2755 (print_mips16_insn_arg): New static function.
2756 * mips-opc.c: Add jalx instruction.
2757 * Makefile.in (mips16-opc.o): New target.
2758 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2759 * configure: Rebuild.
2761 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2763 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2764 operand specifiers in *save, *restore and movem* instructions.
2766 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2769 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2770 register operands for immediate arithmetic, not, neg, negx, and
2771 set according to condition instructions.
2773 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2774 specifier of the effective-address operand in immediate forms of
2775 arithmetic instructions. The specifier for the immediate operand
2776 notes how and where the constant will be stored.
2778 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2780 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2783 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2786 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2788 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2790 * mn10300-dis.c (disassemble): Handle register lists.
2792 * mn10300-opc.c: Fix handling of register list operand for
2793 "call", "ret", and "rets" instructions.
2795 * mn10300-dis.c (disassemble): Print PC-relative and memory
2796 addresses symbolically if possible.
2797 * mn10300-opc.c: Distinguish between absolute memory addresses,
2798 pc-relative offsets & random immediates.
2800 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2802 (disassemble): Handle SPLIT and EXTENDED operands.
2804 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2806 * mn10300-dis.c: Rough cut at printing some operands.
2808 * mn10300-dis.c: Start working on disassembler support.
2809 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2811 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2813 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2815 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2817 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2819 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2821 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2822 register argument is calls and jmp instructions.
2824 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2826 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2827 getx operand. Fix opcode for mulqu imm,dn.
2829 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2831 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2832 in MN10300_OPERAND_SPLIT operands for how many bits
2833 appear in the basic insn word. Add IMM32_HIGH24,
2834 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2835 (mn10300_opcodes): Use new operands as needed.
2837 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2838 for bset, bclr, btst instructions.
2839 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2841 * mn10300-opc.c (mn10300_operands): Remove many redundant
2842 operands. Update opcode table as appropriate.
2843 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2844 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2846 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2848 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2849 operands (for indexed load/stores). Fix bitpos for DI
2850 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2851 few instructions that insert immediates/displacements in the
2852 middle of the instruction. Add IMM8E for 8 bit immediate in
2853 the extended part of an instruction.
2854 (mn10300_operands): Use new opcodes as appropriate.
2856 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2858 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2859 sequential so the assembler never parallelizes it with
2862 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2864 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2865 a data/address register that appears in register field 0
2866 and register field 1.
2867 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2869 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2871 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2872 standard disassembly.
2874 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2875 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2876 Recategorize PALcode instructions.
2878 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2880 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2882 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2884 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2885 there are no operand types.
2887 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2889 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2891 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2893 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2895 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2897 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2899 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2900 and sst.w instructions.
2902 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2905 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2907 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2910 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2912 * ppc-opc.c (PPCPWR2): Define.
2913 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2916 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2918 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2919 field for movhu instruction.
2921 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2922 cast value to "long" not "signed long" to keep hpux10
2925 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2927 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2930 * mn10300-opc.c (FMT*): Remove definitions.
2932 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2933 for shift-by-register opcodes.
2935 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2936 into [AD][MN][01] for encoding the position of the register
2939 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2941 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2942 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2944 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2946 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2947 Fix various typos. Add "PAREN" operand.
2948 (MEM, MEM2): Define.
2949 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2950 operands. Fix several typos.
2952 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2955 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2957 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2958 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2960 (mn10300_opcodes): Break opcode format out into its own field.
2961 Update many operand fields to deal with signed vs unsigned
2962 issues. Fix one or two typos in the "mov" instruction
2963 opcode, mask and/or operand fields.
2965 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2967 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2968 m68851 wasn't reset.
2970 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2972 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2973 all opcodes. Very rough cut at operands for all opcodes.
2975 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2978 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2980 * mn10200-opc.c, mn10300-opc.c: New files.
2981 * mn10200-dis.c, mn10300-dis.c: New files.
2982 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2983 * disassemble.c: Break mn10x00 support into 10200 and 10300
2985 * configure.in: Likewise.
2986 * configure: Rebuilt.
2988 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2990 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2992 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2994 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2996 * disassemble (ARCH_mn10x00): Define.
2997 (disassembler): Handle bfd_arch_mn10x00.
2998 * configure.in: Recognize bfd_mn10x00_arch.
2999 * configure: Rebuilt.
3001 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3003 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3004 accordingly. Don't declare functions using op_rtn.
3006 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3008 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3009 params to be more standard.
3010 * (disassemble): Print absolute addresses and symbolic names for
3011 branch and jump targets.
3012 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3014 * (v850_opcodes): Add breakpoint insn.
3016 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3018 * m68k-opc.c: Move the fmovemx data register cases before the
3019 other cases, so that they get recognized before the data register
3020 does gets treated as a degenerate register list.
3022 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3024 * mips-opc.c: Add a case for "div" and "divu" with two registers
3025 and a destination of $0.
3027 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3029 * mips-dis.c (print_insn_arg): Add prototype.
3030 (_print_insn_mips): Ditto.
3032 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3034 * mips-dis.c (print_insn_arg): Print condition code registers as
3037 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3039 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3041 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3043 * v850-dis.c (disassemble): Make static. Provide prototype.
3045 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3047 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3050 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3052 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3053 ']' characters into the output stream.
3054 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3055 Add "memop" field to all opcodes (for the disassembler).
3056 Reorder opcodes so that "nop" comes before "mov" and "jr"
3057 comes before "jarl".
3059 * v850-dis.c (print_insn_v850): Fix typo in last change.
3061 * v850-dis.c (print_insn_v850): Properly handle disassembling
3062 a two byte insn at the end of a memory region when the memory
3063 region's size is only two byte aligned.
3065 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3067 * v850-dis.c (v850_reg_names): Define.
3068 (v850_sreg_names, v850_cc_names): Likewise.
3069 (disassemble): Very rough cut at printing operands (unformatted).
3071 * v850-opc.c (BOP_MASK): Fix.
3072 (v850_opcodes): Fix mask for jarl and jr.
3074 * v850-dis.c: New file. Skeleton for disassembler support.
3075 * Makefile.in Remove v850 references, they're not needed here.
3076 * configure.in: Add v850-dis.o when building v850 toolchains.
3077 * configure: Rebuilt.
3078 * disassemble.c (disassembler): Call v850 disassembler.
3080 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3081 (insert_d8_6, extract_d8_6): New functions.
3082 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3083 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3085 (IF4A, IF4B): Use "D7" instead of "D7S".
3086 (IF4C, IF4D): Use "D8_7" instead of "D8".
3087 (IF4E, IF4F): New. Use "D8_6".
3088 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3089 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3091 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3092 (v850_operands): Change D16 to D16_15, use special insert/extract
3093 routines. New new D16 that uses the generic insert/extract code.
3094 (IF7A, IF7B): Use D16_15.
3095 (IF7C, IF7D): New. Use D16.
3096 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3098 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3099 message. Issue an error if the branch offset is odd.
3101 * v850-opc.c: Add notes about needing special insert/extract
3102 for all the load/store insns, except "ld.b" and "st.b".
3104 * v850-opc.c (insert_d22, extract_d22): New functions.
3105 (v850_operands): Use insert_d22 and extract_d22 for
3107 (insert_d9): Fix range check.
3109 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3111 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3112 and set bits field to D9 and D22 operands.
3114 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3116 * v850-opc.c (v850_operands): Define SR2 operand.
3117 (v850_opcodes): "ldsr" uses R1,SR2.
3119 * v850-opc.c (v850_opcodes): Fix opcode specs for
3120 sld.w, sst.b, sst.h, sst.w, and nop.
3122 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3124 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3125 end of the opcode table.
3127 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3129 * d10v-opc.c (pre_defined_registers): Added register pairs,
3130 "r0-r1", "r2-r3", etc.
3132 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3134 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3135 Create I16U for an unsigned 16bit mmediate operand.
3136 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3138 * v850-opc.c (v850_operands): Define EP operand.
3139 (IF4A, IF4B, IF4C, IF4D): Use EP.
3141 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3142 with immediate operand, "movhi". Tweak "ldsr".
3144 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3145 correct. Get sld.[bhw] and sst.[bhw] closer.
3147 * v850-opc.c (v850_operands): "not" is a two byte insn
3149 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3151 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3153 * v850-opc.c (two): Get order of words correct.
3155 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3157 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3158 register source and destination operands.
3159 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3161 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3162 same thinko in "trap" opcode.
3164 * v850-opc.c (v850_opcodes): Add initializer for size field
3167 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3168 Add D8 for 8-bit unsigned field in short load/store insns.
3169 (IF4A, IF4D): These both need two registers.
3170 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3171 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3172 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3173 for "ldsr" and "stsr".
3174 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3177 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3178 short store word (sst.w).
3180 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3182 * v850-opc.c (v850_operands): Added insert and extract fields,
3183 pointers to functions that handle unusual operand encodings.
3185 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3187 * v850-opc.c (v850_opcodes): Enable "trap".
3189 * v850-opc.c (v850_opcodes): Fix order of displacement
3190 and register for "set1", "clr1", "not1", and "tst1".
3192 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3194 * v850-opc.c (v850_operands): Add "B3" support.
3195 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3198 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3200 * v850-opc.c: Close unterminated comment.
3202 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3204 * v850-opc.c (v850_operands): Add flags field.
3205 (v850_opcodes): add move opcodes.
3207 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3209 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3210 * configure: (bfd_v850v_arch) Add new case.
3211 * configure.in: (bfd_v850_arch) Add new case.
3212 * v850-opc.c: New file.
3214 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3216 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3218 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3220 * d10v-opc.c: Add additional information to the opcode
3221 table to help determinine which instructions can be done
3224 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3226 * mpw-make.sed: Update editing of include pathnames to be
3229 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3231 * arm-opc.h: Added "bx" instruction definition.
3233 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3235 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3237 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3239 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3241 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3243 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3245 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3247 * makefile.vms: Update for alpha-opc changes.
3249 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3251 * i386-dis.c (print_insn_i386): Actually return the correct value.
3252 (ONE, OP_ONE): #ifdef out; not used.
3254 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3256 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3257 Changed subi operand type to treat 0 as 16.
3259 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3261 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3264 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3266 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3267 memory transfer instructions. Add new format string entries %h and %s.
3268 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3271 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3273 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3274 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3276 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3278 * alpha-dis.c (print_insn_alpha_osf): Remove.
3279 (print_insn_alpha_vms): Remove.
3280 (print_insn_alpha): Make globally visible. Chose the register
3281 names based on info->flavour.
3282 * disassemble.c: Always return print_insn_alpha for the alpha.
3284 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3286 * d10v-dis.c (dis_long): Handle unknown opcodes.
3288 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3290 * d10v-opc.c: Changes to support signed and unsigned numbers.
3291 All instructions with the same name that have long and short forms
3292 now end in ".l" or ".s". Divs added.
3293 * d10v-dis.c: Changes to support signed and unsigned numbers.
3295 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3297 * d10v-dis.c: Change all functions to use info->print_address_func.
3299 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3301 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3302 move ccr/sr insns more strict so that the disassembler only
3303 selects them when the addressing mode is data register.
3305 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3306 * d10v-opc.c (pre_defined_registers): Declare.
3307 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3308 to pick a better name for the registers.
3310 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3312 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3313 operands for fexpand and fpmerge. From Christian Kuehnke
3314 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3316 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3318 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3319 print routine. Take new regnames and cpumask arguments.
3320 Kill the environment variable nonsense.
3321 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3322 (print_insn_alpha_vms): New function. Do VMS style regnames.
3323 * disassemble.c (disassembler): Test bfd flavour to pick
3324 between OSF and VMS routines. Default to OSF.
3326 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3328 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3329 * configure: Rebuild.
3330 * Makefile.in (install): Use @INSTALL_SHLIB@.
3332 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3334 * configure: (bfd_d10v_arch) Add new case.
3335 * configure.in: (bfd_d10v_arch) Add new case.
3336 * d10v-dis.c: New file.
3337 * d10v-opc.c: New file.
3338 * disassemble.c (disassembler) Add entry for d10v.
3340 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3342 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3343 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3345 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3347 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3348 distinguish between variants of the instruction set.
3349 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3350 distinguish between variants of the instruction set.
3352 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3354 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3355 the 8086 instruction set.
3356 * i386-dis.c: General cleanups. Make most things static. Add
3357 prototypes. Get rid of static variables aflags and dflags. Pass
3358 them as args (to almost everything).
3360 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3362 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3364 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3366 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3367 if the next arg is marked with SRC_IN_DST. Gross.
3369 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3370 we're looking for and find EXR.
3372 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3373 if we're looking for KBIT and we don't find it.
3375 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3378 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3379 3bit immediate operands.
3381 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3383 * Released binutils 2.7.
3385 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3386 <kkaempf@progis.ac-net.de>.
3388 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3390 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3392 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3394 * sparc-dis.c (print_insn_sparclite): New routine to print
3395 sparclite instructions.
3397 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3399 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3401 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3403 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3404 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3405 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3407 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3409 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3410 Use autoconf-set values.
3411 (docdir, oldincludedir): Removed.
3412 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3414 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3416 * alpha-opc.c: New file.
3417 * alpha-opc.h: Remove.
3418 * alpha-dis.c: Complete rewrite to use new opcode table.
3419 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3420 * configure: Rebuild with autoconf 2.10.
3421 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3422 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3424 (alpha-opc.o): New target.
3426 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3428 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3429 Set imm_added_to_rs1 even if the source and destination register
3432 * sparc-opc.c: Add some two operand forms of the wr instruction.
3434 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3436 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3439 * disassemble.c (disassembler): Handle H8/S.
3440 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3442 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3444 * sparc-opc.c: Add beq/teq as aliases for be/te.
3446 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3447 <sergei@msil.sps.mot.com>.
3449 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3451 * makefile.vms: New file.
3453 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3455 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3457 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3460 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3462 * i386-dis.c (OP_OFF): Call append_prefix.
3464 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3466 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3467 unsigned long to silence a warning from the Solaris PowerPC
3470 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3472 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3474 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3476 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3478 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3479 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3480 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3481 cpush, cpusha, cpull sparclet insns.
3483 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3485 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3487 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3489 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3490 Set F_FLOAT on other floating point instructions.
3492 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3494 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3496 (powerpc_opcodes): Add 860/821 specific SPRs.
3498 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3500 * configure.in: Permit --enable-shared to specify a list of
3501 directories. Set and substitute BFD_PICLIST.
3502 * configure: Rebuild.
3503 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3504 uses. Set to @BFD_PICLIST@.
3506 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3508 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3509 not "abs", which may be needed for the absolute in something
3510 like btst #0,@10:8. Print L_3 immediates separately from other
3511 immediates. Change ABSMOV reference to ABS8MEM.
3513 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3515 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3516 (current_arch_mask): New static global.
3517 (compute_arch_mask): New static function.
3518 (print_insn_sparc): Delete sparc_v9_p. New static local
3519 current_mach. Resort opcode table if current_mach changes.
3520 Generalize "insn not supported" test.
3521 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3522 Delete test for v9/!v9.
3523 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3525 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3526 (brfcx): Renamed to FBRX.
3527 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3528 coprocessor mnemonics are not supported on the sparclet).
3529 (condf): Renamed to CONDF.
3530 (SLCBCC2): Delete F_ALIAS flag.
3532 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3534 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3535 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3537 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3539 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3540 that the shared library version number is set correctly.
3542 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3544 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3545 Miles Bader <miles@gnu.ai.mit.edu>.
3546 * configure: Rebuild.
3548 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3550 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3553 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3555 * configure: Rebuild with autoconf 2.8.
3557 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3559 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3560 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3562 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3564 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3565 since they appear as targets in Makefile.in.
3566 * configure: Rebuild.
3568 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3570 * mpw-make.sed: Edit out shared library support bits.
3572 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3574 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3575 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3576 (sparc_opcodes): Add sparclet insns.
3577 (sparclet_cpreg_table): New static local.
3578 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3579 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3581 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3583 * i386-dis.c (index16): New static variable.
3584 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3586 (OP_indirE): Return result of OP_E.
3587 (OP_E): Check for 16 bit addressing mode, and disassemble
3588 correctly. Optimised 32 bit case a little. Don't print
3589 "(base,index,scale)" when sib specifies only an offset.
3591 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3593 * configure.in: Set and substitute SHLIB_DEP.
3594 * configure: Rebuild.
3595 * Makefile.in (SHLIB_DEP): New variable.
3596 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3597 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3598 COMMON_SHLIB, add them to piclist with appropriate modifications.
3599 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3600 here: just use piclist.
3602 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3604 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3605 (print_insn_sparc): Rewrite v9/not-v9 tests.
3606 (compare_opcodes): Likewise.
3607 * sparc-opc.c (MASK_<ARCH>): Define.
3608 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3609 (sparclet,v6notv9): Define.
3610 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3611 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3613 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3615 * configure.in: Call AC_PROG_CC before configure.host.
3616 * configure: Rebuild.
3618 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3620 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3622 * i386-dis.c (onebyte_has_modrm): New static array.
3623 (twobyte_has_modrm): New static array.
3624 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3626 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3628 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3631 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3633 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3636 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3638 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3639 m68010up, not just m68020up | cpu32.
3641 * Makefile.in (SONAME): New variable.
3642 ($(SHLINK)): Make a link to the transformed name, as well.
3643 (stamp-tshlink): New target.
3644 (install): Skip stamp-tshlink during install.
3646 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3648 * configure.in: Call AC_ARG_PROGRAM.
3649 * configure: Rebuild.
3650 * Makefile.in (program_transform_name): New variable.
3651 (install): Transform library name before installing it.
3653 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3655 * i960-dis.c (mem): Add HX dcinva instruction.
3657 Support for building as a shared library, based on patches from
3658 Alan Modra <alan@spri.levels.unisa.edu.au>:
3659 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3660 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3661 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3662 * configure: Rebuild.
3663 * Makefile.in (ALLLIBS): New variable.
3664 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3665 (COMMON_SHLIB, SHLINK): New variables.
3666 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3667 (STAGESTUFF): Remove variable.
3668 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3669 (stamp-piclist, piclist): New targets.
3670 ($(SHLIB), $(SHLINK)): New targets.
3671 ($(OFILES)): Depend upon stamp-picdir.
3672 (disassemble.o): Build twice if PICFLAG is set.
3673 (MOSTLYCLEAN): Add pic/*.o.
3674 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3675 (distclean): Remove pic and stamp-picdir.
3676 (install): Install shared libraries.
3677 (stamp-picdir): New target.
3679 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3681 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3682 Print unknown instruction as "unknown", rather than in hex.
3684 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3686 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3688 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3690 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3692 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3694 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3695 when necessary. From Ulrich Drepper
3696 <drepper@myware.rz.uni-karlsruhe.de>.
3698 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3700 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3701 sparc_num_opcodes. Update architecture enum values.
3702 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3703 (sparc_opcode_lookup_arch): New function.
3704 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3705 (sparc_opcodes): Add v9a shutdown insn.
3707 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3709 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3710 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3712 (print_insn_sparc64): Deleted.
3713 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3716 * sparc-opc.c (architecture_pname): Add v9a.
3718 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3720 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3721 incorrectly defined as 0x16 when it should be 0x15.
3722 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3723 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3724 excb (exception barrier) which is defined in the Alpha
3725 Architecture Handbook version 2.
3726 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3727 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3728 disassembled as or, for example.
3730 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3732 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3733 (_print_insn_mips): Change i from int to unsigned int.
3735 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3737 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3738 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3740 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3742 * i386-dis.c: Added Pentium Pro instructions.
3744 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3746 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3749 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3751 * sh-opc.h (sh_nibble_type): Added REG_B.
3752 (sh_arg_type): Added A_REG_B.
3753 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3755 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3757 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3759 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3761 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3763 * Makefile.in (distclean): Remove stamp-h. From Ronald
3764 F. Guilmette <rfg@monkeys.com>.
3766 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3768 From David Mosberger-Tang <davidm@azstarnet.com>:
3769 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3772 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3774 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3775 (sh_table): Added many SH3 opcodes.
3776 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3778 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3780 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3781 (subco,subco.): Mark this PPC, not PPCCOM.
3783 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3785 * configure: Rebuild with autoconf 2.7.
3787 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3789 * configure: Rebuild with autoconf 2.6.
3791 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3793 * configure.in: Sort list of architectures. Accept but do nothing
3794 for alliant, convex, pyramid, romp, and tahoe.
3796 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3798 * a29k-dis.c (print_special): Change num to unsigned int.
3800 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3802 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3805 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3807 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3808 * configure: Rebuilt.
3810 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3812 * configure.in: Add case for bfd_i860_arch.
3813 * configure: Rebuild.
3815 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3817 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3818 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3819 (NEXTDOUBLE): Likewise.
3820 (print_insn_m68k): Don't match fmoveml if there is more than one
3821 register in the list.
3822 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3824 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3826 * m68k-opc.c: Use #W rather than #w.
3827 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3829 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3831 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3832 and likewise for all the dbxx opcodes.
3834 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3836 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3838 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3840 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3841 the VR4100 specific instructions to the mips_opcodes structure.
3843 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3845 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3846 ugly Metrowerks bug in CW6, is fixed in CW7.
3848 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3850 * ppc-opc.c (whole file): Add flags for common/any support.
3852 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3854 * Makefile.in (BISON): Remove macro.
3855 (FLAGS_TO_PASS): Remove BISON.
3857 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3859 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3861 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3862 instructions that take no args by looking at the match mask.
3863 (print_insn_arg): Always print "%" before register names.
3864 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3865 [case '_']: Don't print "@#" before address.
3866 [case 'J']: Use "%s" as format string, not register name.
3867 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3869 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3871 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3874 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3876 From David Mosberger-Tang <davidm@azstarnet.com>
3878 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3879 (alpha_insn_set): added definitions for VAX floating point
3880 instructions (Unix compilers don't generate these, but handcoded
3881 assembly might still use them).
3883 * alpha-dis.c (print_insn_alpha): added support for disassembling
3884 the miscellaneous instructions in the Alpha instruction set.
3886 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3888 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3889 no longer create sysdep.h, sed ppc-opc.c to work around a
3890 serious Metrowerks C bug.
3891 * mpw-make.in: Remove.
3892 * mpw-make.sed: New file, used by mpw-configure to edit
3893 Makefile.in into an MPW makefile.
3895 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3897 * Makefile.in (maintainer-clean): New synonym for realclean.
3899 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3901 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3902 which use '0', '1', and '2' instead. Specify the proper size for
3903 a pmove immediate operand. Correct the pmovefd patterns to be
3904 moves to a register, not from a register.
3905 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3907 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3909 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3910 %psr, %wim, %tbr as F_NOTV9.
3912 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3914 * Makefile.in (Makefile): Just rebuild Makefile when running
3916 (config.h, stamp-h): New targets.
3917 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3918 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3919 rebuilding config.h.
3920 * configure: Rebuild.
3922 * mips-opc.c: Change unaligned loads and stores with "t,A"
3923 operands to use "t,A(b)".
3925 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3927 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3929 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3931 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3932 until 3 instead of until 2.
3934 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3936 * Makefile.in (ALL_CFLAGS): Define.
3937 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3938 (MOSTLYCLEAN): Add config.log.
3939 (distclean): Don't remove config.log.
3940 * configure.in: Substitute HDEFINES.
3941 * configure: Rebuild.
3943 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3945 * sh-opc.h (sh_arg_type): Add F_FR0.
3946 (sh_table, case fmac): Add F_FR0 as first argument.
3948 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3950 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3952 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3954 * sparc-dis.c: Remove all references to NO_V9.
3956 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3958 * aclocal.m4: Just include ../bfd/aclocal.m4.
3959 * configure: Rebuild.
3961 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3963 * sparc-dis.c (X_DISP19): Define.
3964 (print_insn, case 'G'): Use it.
3965 (print_insn, case 'L'): Sign extend displacement.
3967 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3969 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3970 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3971 host_makefile_frag or frags.
3972 * aclocal.m4: New file.
3973 * configure: Rebuild.
3974 * Makefile.in (INSTALL): Set to @INSTALL@.
3975 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3976 (INSTALL_DATA): Set to @INSTALL_DATA@.
3978 (AR_FLAGS): Set to rc rather than qc.
3979 (CC): Define as @CC@.
3980 (CFLAGS): Set to @CFLAGS@.
3981 (@host_makefile_frag@): Remove.
3982 (config.status): Remove dependency upon @frags@.
3984 * configure.in: ../bfd/config.bfd now just sets shell variables.
3985 Use them rather than looking through target Makefile fragments.
3986 * configure: Rebuild.
3988 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3990 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3992 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3994 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3995 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3998 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3999 (lookup_{name,value}): New functions.
4000 (prefetch_table): New static local.
4001 (sparc_{encode,decode}_prefetch): New functions.
4002 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4004 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4006 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4009 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4011 * sh-dis.c: Correct comment on first line of file.
4013 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4015 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4017 * sparc-opc.c (asi, membar): New static locals.
4018 (sparc_{encode,decode}_{asi,membar}): New functions.
4019 (sparc_opcodes, membar insn): Fix.
4020 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4021 Support decoding of membar masks.
4024 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4026 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4028 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4030 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4031 and likewise for the other branches. Add bhs as an alias for bcc,
4032 and likewise for the size variants. Add dbhs as an alias for
4035 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4037 * sh-opc.h (FP sts instructions): Update to match reality.
4039 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4041 * m68k-dis.c: (fpcr_names): Add % before all register names.
4042 (reg_names): Likewise.
4043 (print_insn_arg): Don't explicitly print % before register names.
4044 Add % before register names in static array names. In case 'r',
4045 print data registers as `@(Dn)', not `Dn@'. When printing a
4046 memory address, don't print @# before it.
4047 (print_indexed): Change base_disp and outer_disp from int to
4048 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4049 syntax. Sign extend 8 byte displacement correctly.
4050 (print_base): Print using MIT syntax. Print zpc when appropriate.
4051 Change parameter disp from int to bfd_vma.
4053 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4056 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4058 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4059 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4060 * sh-opc.h (sh_arg_type): Add new operand types.
4061 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4063 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4065 * Makefile.in (distclean): Remove generated file config.h.
4067 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4069 * Makefile.in (distclean): Remove generated file config.h.
4071 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4073 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4075 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4077 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4078 rather than numopcodes. Use m68k_opcodes rather than removed
4079 opcode function. Don't check F_ALIAS.
4080 (print_insn_arg): Change first parameter to be const char *.
4081 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4082 (m68k-opc.o): New target.
4083 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4084 * configure: Rebuild.
4086 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4088 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4089 (opcode_bits, opcode_hash_table): New variables.
4090 (opcodes_initialized): Renamed from opcodes_sorted.
4091 (build_hash_table): New function.
4092 (is_delayed_branch): Use hash table.
4093 (print_insn): Renamed from print_insn_sparc, made static.
4094 Build and use hash table. If !sparc64, ignore sparc64 insns,
4095 and vice-versa if sparc64.
4096 (print_insn_sparc, print_insn_sparc64): New functions.
4097 (compare_opcodes): Move sparc64 opcodes to end.
4098 Print commutative insns with constant second.
4099 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4101 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4103 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4104 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4105 avoids printing a delay slot in a delay slot.
4106 * sh-opc.h (sh_table): Fully bracket last entry.
4108 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4110 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4112 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4114 * configure.in: Get host_makefile_frag from ${srcdir}.
4116 * configure.in: Autoconfiscated. Check for string[s].h. Create
4117 config.h from config.in. Don't set up sysdep.h link.
4118 * sysdep.h: New file.
4119 * configure, config.in: New files, generated from configure.in.
4120 * Makefile.in: Updated to be processed autoconf-style.
4121 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4122 (Makefile): Depend on config.status.
4123 (config.status): New rule.
4124 * configure.bat: Update Makefile substitutions.
4126 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4128 * mips-opc.c (L1): Define.
4129 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4130 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4133 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4135 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4136 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4137 have multiple add units but only a single logical unit.
4139 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4140 shifted by 18, without any insertion or extraction function.
4141 (insert_cr, extract_cr): Remove.
4143 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4145 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4148 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4150 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4151 * sh-opc.h: Add copyright.
4153 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4155 * Makefile.in (crunch-m68k): Delete extra target accidentally
4156 checked in a while ago.
4158 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4160 * sh-opc.h (sh_table): Add SH3 support.
4162 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4164 * sh-opc.h: Added bsrf and braf.
4166 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4168 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4169 bogus [ls]fm{ea,fd} patterns.
4171 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4172 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4173 initialize it from memory. Make function static.
4174 (print_insn_{big,little}_arm): New functions.
4175 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4176 the correct endianness.
4178 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4180 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4183 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4185 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4186 17th, so that it builds again using GCC as the compiler.
4188 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4190 * mips-dis.c (print_insn_little_mips): Cast return value from
4191 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4192 expects an unsigned long, and that might be fewer words of
4193 argument storage (e.g., if bfd_vma is long long on a 32-bit
4195 (print_insn_big_mips): Likewise with bfd_getb32 value.
4196 (_print_insn_mips): Now static.
4198 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4200 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4201 gcc memory hog problem with initializer is fixed.
4203 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4205 Merge in support for Mac MPW as a host.
4206 (Old change descriptions retained for informational value.)
4208 * mpw-config.in (archname): Compute from the config.
4209 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4211 * mpw-config.in (target_arch): Compute from canonical target.
4212 (m68k, mips, powerpc, sparc): Add architectures.
4213 * mpw-make.in (disassemble.c.o): Add.
4214 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4216 * mpw-config.in (BFD_MACHINES): Set to a default value.
4217 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4219 * mpw-make.in (CSEARCH): Add extra-include to search path.
4221 * mpw-config.in (varargs.h): Don't create.
4222 (sysdep.h): Create using forward-include.
4223 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4225 * mpw-config.in: New file, MPW version of configure.in.
4226 * mpw-make.in: New file, MPW version of Makefile.in.
4228 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4230 * alpha-dis.c (print_insn_alpha): Put empty statement after
4233 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4235 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4236 (low_sign_extend): Likewise.
4237 (get_field): Delete unused function.
4238 (set_field, deposit_14, deposit_21): Likewise.
4240 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4242 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4245 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4247 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4249 * alpha-opc.h (OSF_ASMCODE): define
4250 print pal-code names as defined in App C of the
4251 Alpha Architecture Reference Manual
4253 * alpha-dis.c: cleaned up output
4254 print stylized code forms as defined in App A.4.3 of the
4255 Alpha Architecture Reference Manual
4257 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4259 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4261 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4264 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4266 * m68k-dis.c (opcode): New function. Returns address of opcode
4267 table entry given index, even if the opcode table was split to
4268 work around gcc bugs.
4269 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4271 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4272 (reg_names): Now const.
4273 (print_insn_arg): Arrays cacheFieldName and names now const.
4274 (print_indexed): Array scales now const.
4276 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4278 * ppc-opc.c: Sort recently added instructions by minor opcode
4279 number within major opcode number.
4281 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4283 * hppa-dis.c: Include libhppa.h.
4285 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4287 * mips-opc.c: Change dli to use M_DLI, and add dla.
4289 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4291 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4293 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4295 * mips-opc.c: Add r4650 mul instruction.
4297 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4299 * mips-opc.c: Add uld and usd macros for unaligned double load and
4302 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4304 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4305 mfdcr, mtdcr, icbt, iccci.
4307 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4309 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4310 signed char fields to shorts, more portable.
4312 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4314 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4315 char fields as signed chars, since they may have negative values.
4317 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4319 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4320 (mycroft@netbsd.org).
4322 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4324 From "Logg, Ed" <elogg@ea.com>:
4325 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4326 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4329 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4331 * ppc-opc.c: Changes based on patch from David Edelsohn
4332 <edelsohn@mhpcc.edu>.
4333 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4336 (insert_tbr): New static function.
4337 (extract_tbr): New static function.
4338 (XFXFXM_MASK, XFXM): Define.
4339 (XSPRBAT_MASK, XSPRG_MASK): Define.
4340 (powerpc_opcodes): Add instructions to access special registers by
4341 name. Add mtcr and mftbu.
4343 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4345 * mips-opc.c (P3): Define.
4346 (mips_opcodes): Add mad and madu.
4348 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4350 * configure.in: Add W65 support.
4351 * disassemble.c: Likewise.
4352 * w65-opc.h, w65-dis.c: New files.
4354 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4356 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4359 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4361 * mips-opc.c: Add dli as a synonym for li.
4363 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4365 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4366 print something for reserved opcode values, even if it won't
4369 * mips-dis.c (_print_insn_mips): When initializing, shift right
4370 and mask, to avoid sign extension problems on the Alpha.
4372 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4375 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4377 * sh-opc.h (mov.l gbr): Get direction right.
4378 * sh-dis.c (print_insn_shx): New function.
4379 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4380 print opcodes with right byte order.
4382 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4384 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4385 to avoid conflicts with getopt.
4387 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4389 * hppa-dis.c (print_insn_hppa): Read the instruction using
4390 bfd_getb32, so that it works on a little endian or 64 bit host.
4391 Remove unused local variable op.
4393 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4395 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4396 addu does not work correctly if -mips3.
4398 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4400 * a29k-dis.c (print_special): Add special register names defined
4401 on 29030, 29040 and 29050.
4402 (print_insn): Handle new operand type 'I'.
4404 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4406 * Makefile.in (INSTALL): Use top level install.sh script.
4408 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4410 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4411 that it works on a little endian host.
4413 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4415 * configure.in: Use ${config_shell} when running config.bfd.
4417 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4419 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4421 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4423 * a29k-dis.c (print_insn): Print the opcode.
4425 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4427 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4429 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4431 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4433 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4435 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4436 which store a value into memory.
4438 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4440 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4441 * arm-dis.c, arm-opc.h: New files.
4443 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4445 * Makefile.in (ns32k-dis.o): Add dependency.
4446 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4447 string, not as array of chars.
4449 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4451 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4453 * sparc-opc.c: Added sparclite extended FP operations, and
4454 versions of v9 impdep* instructions permitting specification of
4457 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4459 * i960-dis.c (reg_names): Now const.
4460 (struct sparse_tabent): New type, copied from array type in mem
4462 (ctrl): Local static array ctrl_tab now const.
4463 (cobr): Local static array cobr_tab now const.
4464 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4465 static variable mem_tab no longer explicitly initialized. Changed
4466 mem_init to const array of struct sparse_tabent.
4467 (reg): Local static variable reg_tab no longer explicitly
4468 initialized. Changed reg_init to const array of struct
4470 (ea): Local static array scale_tab now const.
4472 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4475 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4477 * configure.bat: the disassember needs to be enabled for
4478 "objdump -d" to work in djgpp.
4480 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4482 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4483 (invalid_float): Enabled general version, doesn't require running
4484 on ns32k host. Changed to take char* argument, and test for
4485 explicitly specified sizes, instead of using sizeof() on host CPU
4487 (INVALID_FLOAT): Cast first argument.
4488 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4489 list_P032, list_M032): Now const.
4490 (optlist, list_search): Made appropriate arguments now point to
4492 (print_insn_arg): Changed static array of one-character-string
4493 pointers into a static const array of characters; fixed sprintf
4494 statement accordingly.
4496 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4498 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4499 from distribution. A ns32k-dis.c from a previous distribution has
4500 been brought up to date and supports the new interface.
4502 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4504 * configure.in: add bfd_ns32k_arch target support.
4506 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4507 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4509 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4511 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4514 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4516 * h8300-dis.c, mips-dis.c: Don't use true and false.
4518 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4520 * configure.in: Change --with-targets to --enable-targets.
4522 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4524 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4525 opcodes to the first instruction with that opcode, to speed
4526 disassembly of large files. From ralphc@pyramid.com (Ralph
4529 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4531 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4533 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4535 * configure.bat: update to latest makefile.in
4537 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4539 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4540 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4541 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4542 slot insn is in a delay slot.
4543 * z8k-opc.h: (resflg): Fix patterns.
4544 * h8500-opc.h Fix CR insn patterns.
4546 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4548 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4549 "cmpl" before POWER versions, so that gas -many uses them.
4551 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4553 * disassemble.c: New file.
4554 * Makefile.in (OFILES): Add disassemble.o.
4555 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4556 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4557 binutils/configure.in.
4559 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4560 opcode being examined.
4562 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4565 (insert_ral, insert_ram, insert_ras): New functions.
4566 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4567 RAS for store with update.
4569 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4571 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4572 (edelsohn@npac.syr.edu).
4574 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4579 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4581 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4583 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * ppc-opc.c (powerpc_operands): The signedp field has been
4586 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4587 instead. Add new operand SISIGNOPT.
4588 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4589 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4590 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4593 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4595 * i386-dis.c (struct private): Renamed to dis_private. `private'
4596 is a reserved word for dynix cc.
4598 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4600 * configure.in: Change error message to refer to bfd/config.bfd
4601 rather than bfd/configure.in.
4603 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4605 * ppc-opc.c: Define POWER2 as short alias flag.
4606 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4609 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4611 * i960-dis.c (print_insn_i960): Don't read a second word for
4612 opcodes 0, 1, 2 and 3.
4614 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4616 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4618 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4620 * m68881-ext.c: Removed; no longer used.
4621 * Makefile.in: Changed accordingly.
4623 * m68k-dis.c (ext_format_68881): Don't declare.
4624 (print_insn_m68k): If an instruction uses place 'i', it uses at
4625 least four fixed bytes.
4626 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4627 extended float, convert to double using floatformat_to_double, not
4628 ieee_extended_to_double, and fetch the data before converting it.
4630 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4632 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4633 davidj@ICSI.Berkeley.EDU (David Johnson).
4635 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4637 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4638 PowerPC uses bdnz[l][a].
4640 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4642 * dis-buf.c, i386-dis.c: Include sysdep.h.
4644 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4646 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4648 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4649 by Motorola PowerPC 601 with PPC_OPCODE_601.
4650 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4651 Disassemble Motorola PowerPC 601 instructions as well as normal
4652 PowerPC instructions.
4654 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4656 * i960-dis.c (reg, mem): Just use a static array instead of
4659 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4661 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4662 condition name index if this is for a negated condition.
4664 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4665 Floating point format for 'H' operand is backwards from normal
4666 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4667 operands (fmpyadd and fmpysub), handle bizarre register
4668 translation correctly for single precision format.
4670 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4671 or 'I' operands if the next format specifier is 'M' (fcmp
4672 condition completer).
4674 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4676 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4677 single number giving a bitmask for the MB and ME fields of an M
4678 form instruction. Change NB to accept 32, and turn it into 0;
4679 also turn 0 into 32 when disassembling. Seperated SH from NB.
4680 (insert_mbe, extract_mbe): New functions.
4681 (insert_nb, extract_nb): New functions.
4682 (SC_MASK): Mask out SA and LK bits.
4683 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4684 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4685 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4686 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4687 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4688 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4689 (powerpc_macros): Define table of macro definitions.
4690 (powerpc_num_macros): Define.
4692 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4693 if PPC_OPERAND_NEXT is set.
4695 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4697 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4698 char. Retrieve contents using bfd_getl32 instead of shifting.
4700 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4702 * ppc-opc.c: New file. Opcode table for PowerPC, including
4703 opcodes for POWER (RS/6000).
4704 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4705 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4706 (CFILES): Add ppc-dis.c.
4707 (ppc-dis.o, ppc-opc.o): New targets.
4708 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4710 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4712 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4713 No space before 'u', 'f', or 'N'.
4715 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4717 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4718 farther than we should.
4720 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4722 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4724 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4726 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4728 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4729 needs it, to prevent reading past the end of a section.
4731 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4733 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4734 Removed t,A case for la; always use t,A(b) case.
4736 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4738 From Ted Lemen <mellon@pepper.ncd.com>
4739 * mips-dis.c (print_insn_arg): Handle 'k'.
4740 * mips-opc.c: Make cache use k, not t.
4742 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4744 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4745 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4746 FLOAT_FORMAT_CODE to put out floating point register names.
4748 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4750 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4752 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4754 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4756 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4758 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4759 larger than 32. Moved dsxx32 variants first for disassembler.
4761 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4763 * z8kgen.c, z8k-opc.h: Add full lda information.
4765 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4767 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4768 movb instructions. Any necessary space will be emitted by
4769 the code to handle nullification completers.
4771 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4773 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4775 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4777 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4778 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4780 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4782 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4784 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4786 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4787 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4789 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4791 * m88k-dis.c (m88kdis): comment change. Remove space after
4793 (printop): handle new arg types DEC and XREG for m88110.
4795 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4797 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4798 type for absolute branch addresses. Delete special
4799 "ble" and "be" code in 'W' operand code.
4801 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4803 * mips-opc.c: Set hazard information correctly for branch
4804 likely instructions.
4806 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4808 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4809 info->fprintf_func for printing and info->print_address_func for
4812 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4814 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4816 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4818 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4819 Corrected second case of "b" for disassembler.
4821 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4823 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4824 to BFD swapping routines to correspond to BFD name changes.
4826 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4828 * mips-opc.c: Change div machine instruction to be z,s,t rather
4829 than s,t. Change div macro to be d,v,t rather than d,s,t.
4830 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4831 rem and remu which generates only the corresponding div
4832 instruction. This is for compatibility with the MIPS assembler,
4833 which only generates the simple machine instruction when an
4834 explicit destination of $0 is used.
4835 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4837 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4839 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4840 WR_31 hazard for bal, bgezal, bltzal.
4842 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4844 * hppa-dis.c (print_insn_hppa): Use print function
4845 from within the disassemble_info, not fprintf_filtered.
4847 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4849 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4850 Law, law@cs.utah.edu.)
4852 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4854 * mips-opc.c ("absu"): Removed.
4857 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4859 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4860 Changed hazard information to distinguish between memory load
4861 delays and coprocessor load delays.
4863 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4865 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4867 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4869 * configure.in: Don't pass cpu to config.bfd.
4871 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * m88k-dis.c (m88kdis): Make class unsigned.
4875 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4877 * alpha-dis.c (print_insn_alpha): One branch format case was
4878 missing the instruction name.
4880 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4882 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4883 Add the arch-specific auxiliary files.
4884 (OFILES): Remove the arch-specific auxiliary files
4885 and use BFD_MACHINES instead of DIS_LIBS.
4886 * configure.in: Set BFD_MACHINES based on --with-targets option.
4888 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4893 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4895 * sparc-opc.c: Change CONST to const to deal with gcc
4896 -Dconst=__const -traditional.
4898 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4900 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4901 coprocessor instructions out of #if 0, and made them use new
4904 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4906 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4908 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4910 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4911 instruction, for use by the disassembler.
4913 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4914 hand-coded sign extensions that depended on 32-bit host ints.
4915 FIXME, we still depend on big-endian host bitfield ordering.
4916 (sparc_print_insn): Set the insn_info_valid field, and the
4917 other fields that describe the instruction being printed.
4919 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4921 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4922 `jmp' instead of just one of them.
4924 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4926 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4927 (fput_fp_reg_r): Renamed from fput_reg_r.
4928 (fput_fp_reg): New function.
4929 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4931 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4933 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4935 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4937 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4939 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4940 don't output a space.
4942 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4944 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4946 * mips-opc.c: New file, containing opcode table from
4947 ../include/opcode/mips.h.
4948 * Makefile.in: Add it.
4950 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4952 * m88k-dis.c: New file, moved in from gdb and changed to use the
4953 new dis-asm.h disassembler interface.
4954 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4955 (m88k-dis.o): New target.
4957 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4959 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4960 argument string const char * to correspond to opcode/mips.h.
4962 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4964 * mips-dis.c: Updated to account for name changes in new version
4966 * Makefile.in: Added header file dependencies.
4968 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4970 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4972 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4974 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4975 extend, rather than shifts.
4977 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4979 * Makefile.in: Undo 15 June change.
4981 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4983 * m68k-dis.c (print_insn_arg): Change return value to byte count
4985 * m68k-dis.c: Re-write to detect invalid operands before
4986 printing anything, so we can handle this the same way we
4987 handle invalid opcodes.
4989 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4991 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4993 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4995 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4998 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5000 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5002 * configure.in: Do make sysdep.h link.
5003 * Makefile.in: Search ../include. Don't search ../bfd.
5005 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5007 Changes from Jeff Law, law@cs.utah.edu:
5008 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5009 Do not print a space before the completers specified by
5012 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5014 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5015 defined, since gdb has been fixed.
5017 Changes from Jeff Law, law@cs.utah.edu:
5018 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5019 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5020 be a *disassemble_info, not a *FILE.
5021 * hppa-dis.c: Support 'd', '!', and 'a'.
5022 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5023 * hppa-dis.c: Delete cases which are no longer needed.
5025 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5027 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5029 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5031 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5034 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5036 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5037 * configure.in: No longer need to configure to get sysdep.h.
5039 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5041 * Patches from Jeffrey Law <law@cs.utah.edu>.
5042 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5043 templates for 1.1 FP computational instructions.
5045 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5047 * h8500-dis.c (print_insn_h8500): Address argument is type
5049 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5052 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5053 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5055 * sparc-dis.c (compare_opcodes): Move static declaration to
5058 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5060 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5061 instruction, remove unimp hack from 'l' argument.
5063 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5065 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5068 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5070 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5071 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5074 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5076 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5077 arrays of string pointers to 2-d arrays of chars, to save
5080 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5082 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5083 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5085 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5087 * hppa-dis.c: New file from Utah, adapted to new disassembler
5089 * Makefile.in: Include it.
5091 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5093 * sh-dis.c, sh-opc.h: New files.
5095 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5097 * alpha-dis.c, alpha-opc.h: New files.
5099 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5101 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5104 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5106 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5108 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5110 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5113 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5115 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5116 and double percent signs a few places.
5118 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5120 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5121 Use info->print_address_func not print_address.
5123 * dis-buf.c (generic_print_address): New function.
5125 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5127 * Makefile.in: Add sparc-dis.c.
5128 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5130 Add `add' instruction to the set that get checked
5131 for a preceding `sethi' in order to print an absolute address.
5132 * (print_insn): Disassembly prefers real instructions.
5133 (is_delayed_branch): Speed up.
5134 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5135 Still missing some float ops, and needs testing.
5136 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5137 F_ALIAS. Use printf, not fprintf, when not passing a file
5139 (compare_opcodes): Check that identical instructions have
5140 identical opcodes, complain otherwise.
5143 * Include reg_names.
5145 Use dis-asm.h/read_memory_func interface.
5147 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5149 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5150 deliberately return non-zero to setjmp from longjmp. Otherwise
5151 this code fails to compile.
5153 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5155 * m68k-dis.c: Fix prototype for fetch_arg().
5157 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5159 * dis-buf.c: New file, for new read_memory_func interface.
5160 Makefile.in (OFILES): Include it.
5161 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5162 Use new read_memory_func interface.
5164 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5166 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5167 * h8500-opc.h: Fix couple of opcodes.
5169 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5171 * Makefile.in: add dvi & installcheck targets
5173 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5175 * Makefile.in: Update for h8500-dis.c.
5177 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5179 * h8500-dis.c, h8500-opc.h: New files
5181 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5183 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5184 ../include/dis-asm.h.
5185 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5186 and ../gdb/m68k-pinsn.c).
5187 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5188 and ../gdb/i386-pinsn.c).
5189 * m68881-ext.c: New file. Moved definition of
5190 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5191 * Makefile.in: Adjust for new files.
5192 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5193 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5194 can be dis-assembled.
5196 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5198 * mips-dis.c (print_insn_arg): Now returns void.
5200 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5202 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5203 files that use the macros.
5205 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5207 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5208 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5209 (CFILES): Added mips-dis.c.
5211 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5213 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5214 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5216 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5218 * Makefile.in: Improve *clean rules.
5219 * configure.in: Allow a default host.
5221 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5223 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5224 files include other sysdep files
5226 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5228 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5230 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5232 * configure.in: For host support, use ../bfd/configure.host
5233 so it stays in sync with the ../bfd/hosts database.
5235 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5237 * configure.in: use cpu-vendor-os triple instead of nested cases
5239 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5241 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5242 *always* the wrong one.
5244 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5246 * z8kgen.c: added copyright info
5248 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5250 * z8k-dis.c (unparse_instr): prettier tabs
5251 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5253 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5255 * configure.in: Add ncr* configuration.
5256 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5257 picayune ANSI compilers happy.
5259 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5261 * configure.in (i386): Make i386 and i486 synonymous for now.
5262 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5264 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5266 * Makefile.in (install): Fix typo.
5268 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5270 * Makefile.in (make): Remove obsolete crud.
5271 (sparc-opc.o): Avoid Sun Make VPATH bug.
5273 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5275 * Makefile.in: since there are no SUBDIRS, remove rule and
5276 references of subdir_do.
5278 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5280 * Makefile.in (install): Get the library name right here too.
5281 Don't install bfd.h, since it's unrelated to this library. No
5282 subdirs to recurse into, either.
5283 (CFILES): The source file has a .c suffix, not .o.
5285 * sparc-opc.c: New file, moved from BFD.
5286 * Makefile.in (OFILES): Build it.
5288 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5290 * z8k-dis.c: fixed forward refferences of some declarations.
5292 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5294 * Makefile.in: get the name of the library right
5296 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5298 * z8k-dis.c: knows how to disassemble z8k stuff
5299 * z8k-opc.h: new file full of z8000 opcodes
5303 version-control: never
projects / external / binutils.git / blob