2 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
4 * fr30-opc.c: Regenerated.
6 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
8 * fr30-opc.c: Regenerated.
9 * fr30-opc.h: Regenerated.
10 * fr30-dis.c: Regenerated.
11 * fr30-asm.c: Regenerated.
13 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
15 * po/opcodes.pot: Regenerated.
16 * fr30-opc.c: Regenerated.
17 * fr30-opc.h: Regenerated.
18 * fr30-dis.c: Regenerated.
19 * fr30-asm.c: Regenerated.
21 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
23 * disassemble.c (disassembler): Add support for FR30 target.
26 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
29 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
30 CGEN_OPERAND_SEM_ONLY.
32 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
34 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
36 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
38 * po/opcodes.pot: Regenerate.
39 * po/POTFILES.in: Regenerate.
40 * fr30-opc.c: Regenerate.
41 * fr30-opc.h: Regenerate.
43 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
45 * m32r-asm.c: Regenerate.
48 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
50 * configure.in: Added case for bfd_fr30_arch.
51 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
52 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
53 (CLEANFILES): Added stamp-fr30.
55 * fr30-asm.c: New file.
56 * fr30-dis.c: New file.
57 * fr30-opc.c: New file.
58 * fr30-opc.h: New file.
59 * po/POTFILES.in: Regenerated
60 * po/opcodes.pot: Regenerated
64 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
66 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
67 to bcl8,bncl8 entries.
68 (macro_insn_table_entries): Add FILL_SLOT attribute
69 to bcl8r,bncl8r entries.
72 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
74 * configure.in: detect cygwin* instead of cygwin32*
75 * configure: regenerate
77 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
79 * mips-opc.c (IS_M): Added.
82 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
84 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
88 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
91 * cgen-asm.in (insert_1): New function.
92 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
93 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
94 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
95 * cgen-dis.in (extract_1): New function.
96 (extract_normal): buf_ctrl renamed to ex_info, update type.
97 Progress on handling of CGEN_INT_INSN_P.
98 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
99 Update handling of CGEN_INT_INSN_P. Handle errors from
100 @arch@_cgen_extract_operand.
101 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
102 (default_print_insn): Renamed from print_insn.
103 Handle ! CGEN_INT_INSN_P.
104 (print_insn_@arch@): Handle error returns from print_insn.
105 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
106 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
107 (@arch@_cgen_lookup_get_insn_operands): Ditto.
109 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
112 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
114 * m10300-opc.c: Allow autoincrement stores using the same register
115 for source and destination operands.
117 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
119 * m10300-opc.c: DSP instrutions which only write to one general
120 register have no restrictions on matching operands.
122 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
125 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
127 * m32r-opc.h,m32r-opc.c: Regenerate.
130 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
132 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
135 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
137 * i386-dis.c (OP_3DNowSuffix): New static function.
140 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
141 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
142 (insn_codep): New static variable.
143 (print_insn_x86): Init insn_codep after prefixes.
144 (grps): Add GRP14 entries for prefetch, prefetchw.
147 From Jeff B Epler <jepler@usgs.gov>
148 * i386-dis.c (Suffix3DNow): New table.
150 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
152 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
154 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
156 * d10v-dis.c (print_operand): If num is nonzero, then
157 add OPERAND_ACC1, not OPERAND_ACC0.
159 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
161 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
164 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
166 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
170 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
172 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
175 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
177 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
179 start-sanitize-nortel-ppc750
180 1998-09-09 Michael Meissner <meissner@cygnus.com>
182 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
185 end-sanitize-nortel-ppc750
186 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
188 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
190 (print_insn_little_arm): Detect Thumb symbols in elf object
193 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
195 * alpha-dis.c (print_insn_alpha): Use the machine type to
196 decide which PALcode set to include.
198 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
200 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
202 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
204 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
205 MSUB and MSUBS instructions.
208 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
210 * mips-opc.c: Insert contents of vu0.h, rather than including it.
212 * Makefile.am: Rebuild dependencies.
216 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
218 * ppc-opc.c (powerpc_operands): Omit parens around additions in
221 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
223 start-sanitize-coldfire
224 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
225 ColdFire, as below for mulsl and mulul.
227 end-sanitize-coldfire
228 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
229 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
230 +, -, and d for ColdFire.
232 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
233 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
234 (extract_mbe): Likewise.
236 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
238 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
240 * m10300-opc.c: First cut at UDF instructions.
242 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
244 * m32r-opc.c: Regenerate (remove semantic descriptions).
246 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
248 * arm-dis.c (print_insn_big_arm): Fix indentation.
249 (print_insn_little_arm): Likewise.
251 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
253 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
255 (print_insn_little_arm): Likewise.
257 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
259 Move all global state data into opcode table struct, and treat
260 opcode table as something that is "opened/closed".
261 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
262 (cgen_asm_init): Delete.
263 (cgen_set_parse_operand_fn): New function.
264 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
265 (cgen_dis_init): Delete.
266 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
267 (cgen_current_{opcode_table_mach,endian}): Delete.
268 start-sanitize-cygnus
269 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
270 * cgen-dis.in (all fns): Ditto.
271 * cgen-opc.in (all fns): Ditto.
273 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
275 start-sanitize-cygnus
276 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
278 * cgen-dis.in (print_normal): Split into two.
279 (print_address): New function.
280 (extract_insn_normal): Clarify insn_value arg.
281 (print_int_insn): Renamed from print_insn.
282 (print_insn): New arg.
283 (print_insn_@arch@): Open opcode table if not already done so.
284 Move reading of insn into print_insn.
287 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
289 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
293 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
295 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
296 accept an accumulator choice.
297 * m32r-opc.c,m32r-opc.h: Regenerate.
300 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
302 * m10300-opc.c: Add entries for "no_match_operands" field in
306 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
308 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
312 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
314 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
317 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
319 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
321 * m10300-opc.c: Add autoincrement memory loads/stores.
325 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
327 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
328 phmsubh respectively.
331 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
333 start-sanitize-cygnus
334 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
336 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
337 @arch_cgen_get_int_operand.
338 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
339 Update call to @arch@_cgen_insert_operand.
340 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
341 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
342 (extract_insn_normal): New arg `pc', callers updated.
343 Update call to @arch@_cgen_extract_operand.
344 (print_insn): Update call to CGEN_EXTRACT_FN.
346 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
349 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
351 * m10300-opc.c: Fix load to sp and store from sp for the am33.
352 Add more multimedia instructions.
354 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
356 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
361 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
363 * mips-opc.c (pref): Enabled for the r5900.
366 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
368 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
370 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
372 (OP_J): Remove unnecessary subtraction when 16-bit displacement
373 will be masked later.
376 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
378 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
381 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
383 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
384 from raw register #s to symbolic names to make debugging easier.
387 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
389 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
391 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
393 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
394 start-sanitize-cygnus
395 * Makefile.am (CGENDIR): Set via configure.
396 (CGEN): New variable.
397 (CGENFILES): object.scm renamed to cos.scm.
398 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
399 (stamp-m32r): Pass prefix to run-cgen.
400 * Makefile.in: Regenerate.
401 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
402 * cgen-dis.in: Ditto.
403 * cgen-opc.in: Ditto.
404 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
405 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
406 * configure: Regenerate.
410 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
412 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
414 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
416 * m10300-opc.c: Reorder more instructions so that we do not
417 accidentally match a mn10300 instruction when we really
418 wanted an am33 instruction.
421 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
423 * m10300-dis.c: Only recognize instructions from the currently
425 * m10300-opc.c: Add field indicating the particular variant of
426 the mn10300 each instruction is available on.
428 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
430 * configure.in: For bfd_vax_arch, build vax-dis.lo.
431 * Makefile.am: Rebuild dependencies.
432 (CFILES): Add vax-dis.c.
433 (ALL_MACHINES): Add vax-dis.lo.
434 * aclocal.m4: Rebuild with current libtool.
435 * configure, Makefile.in: Rebuild.
437 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
439 * vax-dis.c: New file, from work by Pauline Middelink
440 <middelin@polyware.iaf.nl>.
441 * disassemble.c (ARCH_vax): Define if ARCH_all.
442 (disassembler): Add case for ARCH_vax.
443 * makefile.vms: Support compilation on vms/vax.
446 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
448 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
449 the DVP_OPERAND_RELOC_11_S4 relocation.
453 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
455 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
457 (disassemble): Correctly handle FMT_D10 instructions.
459 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
460 am33 shift instructions.
462 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
464 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
465 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
467 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
468 (mn10300_opcodes): Reorder so as to try and select opcodes from
469 the core chip when multiple alternatives exist. Change several
470 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
471 "macbu" instructions. Fix typos in a couple DSP instructions too.
474 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
476 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
477 related to sign extension and the size of ints.
479 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
481 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
482 instructions. Support (sp) addressing mode by expanding it into
486 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
488 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
489 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
490 be used as immediate values.
494 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
496 * m10300-opc.c: Support 4 byte DSP instructions.
499 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
501 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
504 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
506 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
509 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
511 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
514 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
516 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
517 found on the mn10300.
520 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
522 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
525 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
527 * mips-dis.c (print_insn_little_mips): Previously, instruction
528 printing references the symbol table to determine whether the
529 instruction resides in a block regular instructions or mips16
530 instructions. However, when the disassembler gets used in other
531 environments where the symbol table is not present, we no longer
532 rely in the symbol table, rather, use the low bit of the
533 instructions address to guess. There should be no change for usage
534 of the disassembler in host based programse, gdb ,objdump.
535 (print_insn_big_mips): ditto.
536 (print_insn_mips): ditto
538 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
540 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
542 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
545 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
546 operands for the am33.
547 (mn10300_opcodes): Add new instructions from the am33.
549 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
551 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
553 * i386-dis.c (index16): Add '%' to register names. Use ','
556 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
558 * i386-dis.c: Don't print opcode suffix when we can figure out the
559 size (and gas can!) by register operands, or from the default
561 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
563 (dis386, dis386_twobyte, grps): Use new suffix macros.
564 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
565 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
566 order of cmps operands to agree with Intel docs. Correct operand
567 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
568 agree with Intel docs.
569 (print_insn_x86): Print orphan fwait before other prefixes.
570 Return correct byte count for orphan fwait with prefixes. Don't
571 print `bound' operands in reverse order.
572 (ckprefix): Stop accumulating prefixes if we get fwait.
573 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
575 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
577 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
578 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
580 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
582 Fix problems when bfd_vma is wider than long.
583 * i386-dis.c: Make op_address and start_pc unsigned.
584 (set_op): Make parameter unsigned.
585 (print_insn_x86): Cast to bfd_vma when passing a value to
587 * ns32k-dis.c (CORE_ADDR): Don't define.
588 (print_insn_ns32k): Change type of addr to bfd_vma. Use
589 bfd_scan_vma to read back address.
590 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
592 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
593 (NEXTULONG): New definition.
594 (print_insn_m68k): Avoid overflow when computing third argument of
596 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
597 Use disp instead of val to store offset values.
598 (print_indexed): Use base_disp instead of word to store base
599 displacement, to avoid overflow.
600 * m10300-dis.c (disassemble): Cast value to long when computing
601 pc-relative address, to get correct sign extension.
603 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
605 * m32r-opc.c: Regenerate.
607 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
609 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
610 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
612 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
614 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
616 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
618 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
620 (OP_DSreg): Rename from OP_DSSI.
621 (OP_ESreg): Rename from OP_ESDI.
622 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
624 (append_seg): Rename from append_prefix.
625 (ptr_reg): New function.
626 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
628 (PREFIX_ADDR): Rename from PREFIX_ADR.
629 (float_reg): Add non-broken opcodes for people who don't want
632 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
634 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
637 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
639 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
641 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
643 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
644 0; produce error message for shifts of size 32 (or 64 for 64-bit
645 shifts), because the hardware doesn't support them.
648 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
650 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
653 * vu0.h (sqc2): Fix opcode.
655 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
659 start-sanitize-cygnus
660 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
662 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
663 Change pinfo to use WR_HILO.
666 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
668 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
669 LONG_2, LONG_2b formats to use this new operand.
671 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
673 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
675 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
677 * sparc-dis.c (print_insn_sparc): big endian instruction / little
680 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
682 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
683 and SHORT_B3b formats to use Rb instead of Ra.
685 Add FLAG_MUL16 to MUL2XH opcode.
687 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
688 to existing 1.1.1 parallelisation prohibition procedure.
690 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
692 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
693 * cgen-dis.in (extract_normal): Likewise.
694 * m32r-asm.c,m32r-dis.c: Regenerate.
697 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
699 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
703 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
705 * mips-opc.c (multu1): Add two operand variant for the r5900.
708 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
710 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
711 with a shift count of 0.
714 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
716 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
718 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
720 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
721 (_print_insn_mips): Likewise.
722 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
726 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
728 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
729 (cgen_hw_lookup_by_num): New function.
732 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
735 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
737 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
739 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
741 * sparc-dis.c (print_insn_sparc): Always fetch instructions
742 as big-endian on SPARClite.
745 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
747 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
749 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
753 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
755 * d30v-opc.c (pre_defined_register): Remove alias for r0.
758 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
760 * mips-opc.c (break): Added 20-bit single-operand break
761 instruction for R5900 only.
764 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
766 * po/Make-in (install-info): New target.
768 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
770 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
771 * configure: Rebuild.
773 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
775 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
776 variety of ISA2 instructions to set bottom ten bits of trap code.
778 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
780 * Makefile.am (config.status): Add explicit target so that
781 config.status depends upon bfd/configure.in.
782 * Makefile.in: Rebuild.
784 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
786 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
787 instructions to set bottom ten bits of break code.
788 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
789 for above optional argument.
791 start-sanitize-cygnus
792 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
794 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
795 * m32r-opc.h: Regenerate.
798 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
800 * makefile.vms: Run dec c with /nodebug.
802 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
804 * Makefile.in: Rebuilt.
805 * Makefile.am: Regenerated dependencies with mkdep.
807 * opintl.h (_): Define as dgettext.
809 start-sanitize-cygnus
810 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
812 * configure.in: Add support for --enable-cgen-maint.
813 * Makefile.am (M32R_DEPS): New variable.
814 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
815 * aclocal.m4: Regenerate.
816 * Makefile.in: Regenerate.
817 * configure: Regenerate.
819 * Makefile.am (CGENFILES): Add minsn.scm.
822 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
824 * cgen-asm.c: Internationalised.
825 start-sanitize-cygnus
826 * cgen-asm.in: Internationalised.
827 * cgen-opc.in: Internationalised.
829 * m32r-asm.c: Internationalised.
830 * m32r-dis.c: Internationalised.
831 * m32r-opc.c: Internationalised.
833 * aclocal.m4: Regenerated.
834 * configure: Regenerated.
835 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
836 * Makefile.in: Rebuild.
837 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
838 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
840 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
842 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
844 * aclocal.m4, configure: Rebuild with current tools.
846 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
848 * opintl.h: New file - contains internationalisation macros used
849 by source files in this directory.
850 * po/: New subdirectory - contains internationalisation files.
851 * po/Make-in: New file - Makefile constructor.
852 * po/POTFILES.in: New file - list of files in opcodes directory
853 that should be scan for internationalisation macros.
854 * po/opcodes.pot: New file - list of internationisation strings
855 found in files mentioned in po/POTFILES.in.
856 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
857 entry. Add intl directory to include paths.
858 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
859 HAVE_STRCPY, HAVE_LC_MESSAGES
860 * configure.in: Add rule to build Makefile in po subdirectory.
861 * Makefile.in: Rebuilt.
862 * aclocal.m4: Rebuilt.
863 * config.in: Rebuilt.
864 * configure: Rebuilt.
865 * alpha-opc.c: Internationalised.
866 * arc-dis.c: Internationalised.
867 * arc-opc.c: Internationalised.
868 * arm-dis.c: Internationalised.
869 * cgen-asm.c: Internationalised.
870 * d30v-dis.c: Internationalised.
871 * dis-buf.c: Internationalised.
873 * dvp-dis.c: Internationalised.
874 * dvp-opc.c: Internationalised.
876 * h8300-dis.c: Internationalised.
877 * h8500-dis.c: Internationalised.
878 * i386-dis.c: Internationalised.
879 * m10200-dis.c: Internationalised.
880 * m10300-dis.c: Internationalised.
881 * m68k-dis.c: Internationalised.
882 * m88k-dis.c: Internationalised.
883 * mips-dis.c: Internationalised.
884 * ns32k-dis.c: Internationalised.
885 * opintl.h: Internationalised.
886 * ppc-opc.c: Internationalised.
887 * sparc-dis.c: Internationalised.
888 * v850-dis.c: Internationalised.
889 * v850-opc.c: Internationalised.
891 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
893 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
894 (asm_hash_table_entries): New variable.
895 (cgen_asm_init): Free asm_hash_table_entries.
896 (hash_insn_array,hash_insn_list): New functions.
897 (build_asm_hash_table): Use them. Hash macro insns as well.
898 (cgen_asm_lookup_insn): Update.
899 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
900 (dis_hash_table_entries): New variable.
901 (cgen_dis_init): Free dis_hash_table_entries.
902 (hash_insn_array,hash_insn_list): New functions.
903 (build_dis_hash_table): Use them. Hash macro insns as well.
904 (cgen_dis_lookup_insn): Update.
905 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
906 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
907 (cgen_macro_insn_count): New function.
908 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
909 All callers updated. Sanity check result of extract fn.
910 (@arch@_cgen_get_insn_operands): Change result type to void.
911 Delete args insn_value, length. New arg fields. All callers updated.
912 (@arch@_cgen_lookup_get_insn_operands): New function.
913 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
915 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
917 * i386-dis.c (OP_DSSI): Print segment override.
920 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
922 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
926 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
928 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
932 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
934 * vu0.h (vlqd, vlqi): Update per revised specs.
938 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
940 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
941 (vif_operands): Update.
942 (vif_get_unpackloc): Delete.
943 (state_vif_unpackloc{,_star_p}): Delete.
944 (dvp_opcode_init_parse): Update.
945 (vif_unpack_len_value): Avoid divide by zero.
949 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
951 * vu0.h: Specs changed for VCALLMSR bit pattern.
952 * mips-dis.c: (print_insn_arg) Matching change.
955 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
957 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
960 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
962 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
963 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
964 * configure.in: Define and substitute WIN32LDFLAGS and
966 * aclocal.m4: Rebuild with new libtool.
967 * configure, Makefile.in: Rebuild.
970 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
972 * vu0.h: Corrected bit pattern for VMAXI opcode.
975 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
977 * m32r-opc.c: Regenerate.
980 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
982 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
983 (dvp_expand_macro): Implement.
984 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
985 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
988 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
990 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
991 before trying to copy it.
992 * Makefile.in: Rebuild.
994 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
996 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
999 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1001 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1004 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1006 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1007 from an arbitrary valid buffer instead of fetching them on demand
1009 (invalid_float): use bit_extract_simple() instead of bit_extract().
1011 start-sanitize-m32rx
1012 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1014 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1015 * m32r-opc.h: Add extra control registers.
1018 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1020 From H.J. Lu <hjl@gnu.org>:
1021 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1024 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1026 * Branched binutils 2.9.
1028 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1030 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1031 disassembling last 4 bytes of a section.
1033 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1035 Fix some gcc -Wall warnings:
1036 * arc-dis.c (print_insn): Add casts to avoid warnings.
1037 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1038 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1040 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1041 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1042 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1043 (parse_ffstreg, parse_vif_mode): Likewise.
1045 * m10200-dis.c (disassemble): Likewise.
1046 * m10300-dis.c (disassemble): Likewise.
1047 * ns32k-dis.c (print_insn_ns32k): Likewise.
1048 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1049 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1050 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1051 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1052 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1054 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1055 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1056 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1058 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1059 start-sanitize-tic80
1060 * tic80-dis.c (print_one_instruction): Likewise.
1062 * w65-dis.c (print_operand): Likewise.
1063 * z8k-dis.c (fetch_data): Likewise.
1064 * a29k-dis.c: Add return type for find_byte_func_type.
1065 * arc-opc.c: Include <stdio.h>. Remove declarations of
1066 insert_multshift and extract_multshift.
1067 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1069 (extract_value): Fully parenthesize expression.
1071 * dvp-opc.c: Include <ctype.h>.
1072 (print_sdest): Add default case to switch.
1074 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1075 * h8500-opc.h (h8500_table): Fully bracket initializer.
1076 * w65-opc.h (optable): Likewise.
1077 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1078 * i386-dis.c (OP_E): Initialize local variables.
1079 * m10200-dis.c (print_insn_mn10200): Likewise.
1080 * mips-dis.c (print_insn_mips16): Likewise.
1081 * sh-dis.c (print_insn_shx): Likewise.
1082 * v850-dis.c (print_insn_v850): Likewise.
1083 * ns32k-dis.c (print_insn_arg): Declare.
1084 (get_displacement, invalid_float): Declare.
1085 (list_search, sign_extend, flip_bytes): Declare return type.
1086 (get_displacement): Likewise.
1087 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1089 (print_insn_ns32k): Make i unsigned.
1090 (invalid_float): Make static. Declare type of val.
1091 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1092 on each for iteration.
1093 * tic30-dis.c (get_indirect_operand): Likewise.
1094 * z8k-dis.c (print_insn_z8001): Declare return type.
1095 (print_insn_z8002): Likewise.
1096 (unparse_instr): Fix sprintf format strings.
1098 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1100 * mips-opc.c: Add "sync.l" and "sync.p".
1103 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1105 * dvp-opc.c (extract_vif_datalen): Rewrite.
1106 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1108 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1110 * dvp-dis.c (print_insn): Print unpack address in hex.
1111 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1112 Don't skip over '*', just record it.
1113 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1114 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1115 Don't skip over '*', just record it.
1116 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1117 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1118 (vif_opcodes): Likewise.
1119 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1120 (vif_macros,vif_macro_count): New globals.
1121 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1122 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1123 (vif_get_wl_cl): New function.
1124 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1127 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1129 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1130 default m68k variant to recognize.
1132 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1133 (ctrl, cobr, mem, ea): Likewise.
1134 (print_addr): Likewise. Remove cast.
1135 (ea): Cast argument of print_addr to bfd_vma.
1137 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1139 (cgen_parse_unsigned_integer): Likewise.
1140 (cgen_parse_address): Likewise.
1142 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1144 * i960-dis.c (ctrl): Add full braces to structure initialization.
1145 (cobr, mem, reg): Likewise.
1146 (ea): Correct parenthesization in expression.
1148 * cgen-asm.c: Include <ctype.h>.
1149 (build_asm_hash_table): Remove unused local variable i.
1150 (cgen_parse_keyword): Add casts to avoid warnings.
1152 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1153 symbol. Fix indentation.
1154 (print_insn_little_arm): Likewise.
1156 start-sanitize-r5900
1157 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1159 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1163 start-sanitize-m32rx
1164 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1166 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1171 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1173 * dvp-opc.c (vif_operand_datalen_special): New global.
1176 start-sanitize-r5900
1177 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1179 * vu0.h (vcallms): Use 'O' for call target operand.
1180 * mips-dis.c (print_insn_arg): Handle 'O'.
1183 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1185 * configure.in: Use AM_DISABLE_SHARED.
1186 * aclocal.m4, configure: Rebuild with libtool 1.2.
1188 start-sanitize-r5900
1189 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1191 * mips-dis.c: Change '%' to '#' in r5900 support.
1195 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1197 These patches are courtesy of Jonathan Walton and Tony Thompson
1198 (athompso@cambridge.arm.com).
1200 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1203 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1204 both the offset and the label closest to the destination.
1206 start-sanitize-r5900
1207 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1209 * vu0.h: New file with cop2/vu0 instructions.
1210 * mips-opc.c: Include vu0.h.
1211 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1213 (print_insn_mips): Do not emit a tab after an instruction if the
1214 first arg is an instruction completer (&). If the next arg is an
1215 escape character (%), then print the next arg verbatim.
1216 * Makefile.am (mips-opc.lo): Depend on vu0.h
1220 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1222 * dvp-opc.c (vif_opcodes): Add stcycl.
1224 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1226 * dvp-dis.c (print_dma): Change length from 16 to 8.
1229 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1231 * m32r-opc.h: Regenerate.
1234 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1236 * dvp-opc.c (print_dest1): Print dest spec again.
1237 (print_vfreg,print_accdest): Likewise.
1238 (vif_unpack_len): Round result up to word boundary.
1241 start-sanitize-vr4320
1242 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1244 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1246 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1248 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1253 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1255 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1256 (print_insn): Do mask comparison on proper opcode word.
1257 Print unsigned values in hex.
1258 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1259 (parse_bc): Catch missing dest.
1260 (parse_vfreg): Replace atoi call with strtol.
1261 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1262 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1263 (extract_gif_eop): New function.
1264 (gif_operands): Update eop entry.
1265 (VGIFOP,VGIFNREGS): Fix calcs.
1266 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1267 (gif_regs): Add entry for unused 11 case.
1268 (print_gif_regs): Print empty list instead of nothing.
1269 (extract_gif_nloop): Fix value calc.
1270 (print_gif_nloop): Always print value, even if 0.
1271 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1272 (vif_operands): Use them for wl,cl fields.
1273 (state_vif_wl,state_vif_cl): New static locals.
1274 (parse_vif_mode): Handle numeric args.
1275 (vif_unpack_len_value,vif_unpack_len): New functions.
1276 (vif_insn_len): Call vif_unpack_len.
1279 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1281 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1283 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1285 * cgen-asm.in: Move insertion of generated routines to top of file.
1286 (insert_normal): Add prototype. Delete `shift' arg.
1287 * cgen-dis.in: Move insertion of generated routines to top of file.
1288 (extract_normal): Add prototype. Delete `shift' arg.
1289 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1290 (print_keyword): Add prototype. Fix type of `attrs' arg.
1292 start-sanitize-vr4320
1293 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1295 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1296 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1299 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1301 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1302 assume that info->symbols is non-empty.
1304 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1306 * alpha-opc.c (cvtqs) There is no such thing.
1307 (cvttq): Missing most of the /*d variants.
1309 start-sanitize-r5900
1310 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1312 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1314 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1315 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1318 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1320 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1321 delayed branches or jumps.
1324 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1326 * dvp-opc.c (vif_operands): Add unpack[u] support.
1327 (vif_opcodes): Ditto.
1328 (*_vif_imrubits): Renamed from *_vif_imrbits.
1330 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1332 * dvp-dis.c (print_insn): Handle word number.
1333 Handle mips address vs vu address.
1334 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1335 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1336 ({insert,extract}_dma_addr): Fix word ofset.
1337 ({insert,print}_gif_regs): Fix encode/decode.
1340 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1342 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1344 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1345 * tic30-dis.c (print_branch): Likewise.
1347 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1348 * dvp-dis.c (dvp_info_mach_type): New function.
1349 (print_insn_dvp): Call it.
1350 (print_vif): Return length of 4 if mpg or direct insn so following
1351 insns get properly disabled.
1352 (print_gif): Fix word order.
1353 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1354 (gif_operands): Fix word order.
1355 (gif_opcodes): Likewise.
1356 ({insert,extract,print}_gif_regs): Likewise.
1357 (gif_regs): Add new register number/name changes.
1358 (dma_opcodes): Add dmarefe insn.
1361 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1363 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1364 saved_symbol code as it is no longer needed.
1366 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1368 * cgen-asm.c: Include symcat.h.
1369 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1371 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1374 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1376 * dvp-opc.c (extra_dma_flags): Fix typos.
1377 (dma_operands): Fix word numbers.
1378 (dma_opcodes): Likewise.
1379 ({insert,extract}_dma_flags): Likewise.
1382 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1384 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1387 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1389 * dvp-dis.c (print_gif): Complete.
1390 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1391 (state_gif_{nregs,regs,nloop}): New static locals.
1392 (*_gif_*): Complete.
1393 (dvp_opcode_init_{parse,print}): Init gif state locals.
1394 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1395 (vif_insn_len): Handle `unpack'.
1396 ({insert,extract}_dma_flags): Complete.
1399 start-sanitize-r5900
1400 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1402 * mips-opc.c (mula.s): Renamed from multa.s.
1405 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * m32r-opc.[ch]: Regenerate.
1410 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1412 * dvp-opc.c (dma_operands): Rewrite.
1413 (dma_operand_{count,addr}): New globals.
1414 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1415 (insert_dma_addr): Insert value into insn.
1416 (extract_dma_addr): Extract value from insn.
1418 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1420 * dvp-dis.c (print_vu): Handle loi insns.
1421 (print_insn): Likewise.
1422 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1423 (vu_operands): Make LDEST1 a FAKE operand.
1424 (parse_dest1): Allow elided argument.
1425 (print_dest1): Don't print the argument.
1427 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1429 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1430 (print_vfreg): Don't print dest spec.
1431 (parse_accdest): Dest spec is optional.
1432 (print_accdest): Don't print dest spec.
1435 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1437 * Makefile.am (CGENFILES): Update.
1438 * Makefile.in: Regenerate.
1439 * cgen-asm.in (insert_normal): Result is error message now.
1440 Validate value to be inserted.
1441 (insert_insn_normal): Result is error message now.
1442 (@arch@_cgen_assemble_insn): Update.
1443 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1444 arguments. Don't perform validation here.
1445 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1447 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1449 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1450 operand instance list.
1451 * m32r-opc.c: Regenerate.
1453 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1455 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1456 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1458 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1460 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1462 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1464 * configure.in: Get the version number from BFD.
1465 * configure: Rebuild.
1467 From H.J. Lu <hjl@gnu.org>:
1468 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1469 * Makefile.in: Rebuild.
1471 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1473 * m32r-opc.c: Regenerate.
1474 * m32r-opc.h: Regenerate.
1476 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1478 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1479 Ignore ALIAS insns if asked to.
1480 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1481 * m32r-opc.c: Regenerate.
1484 * dvp.opc.c: Nicely format opcode tables.
1485 (vu_operands): New element UFLAGS.
1486 (parse_uflags,print_uflags): New functions.
1487 (vu_upper_opcodes): Add UFLAGS to all insns.
1490 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1492 Fix rac to accept only a0:
1493 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1494 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1495 Introduce OPERAND_GPR.
1496 * d10v-dis.c (print_operand): Likewise.
1498 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1500 * cgen-opc.in: New file.
1501 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1502 * Makefile.am (CGENFILES): Add cgen-opc.in.
1503 * Makefile.in: Regenerate.
1505 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1506 (cgen_hw_lookup): Make result const.
1508 * cgen-dis.in (*): Use PTR instead of void *.
1509 (print_insn): Delete unused vars `i', `syntax'.
1511 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1514 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1516 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1517 (vif_opcodes): Update renamed insns.
1518 * dvp-dis.c (*): Likewise.
1521 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1523 * configure, aclocal.m4: Rebuild with new libtool.
1525 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1527 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1528 instructions use a PC relative branch, not absolute.
1530 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1532 * configure.in: Set libtool_enable_shared rather than
1533 libtool_shared. Remove diversion hack.
1534 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1536 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1538 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1539 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1541 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1543 * tic30-dis.c: New file.
1544 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1545 * configure.in: Handle bfd_tic30_arch.
1546 * Makefile.am: Rebuild dependencies.
1547 (CFILES): Add tic30-dis.c
1548 (ALL_MACHINES): Add tic30-dis.lo.
1549 * configure, Makefile.in: Rebuild.
1551 start-sanitize-m32rx
1552 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1554 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1555 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1556 macwhi-a and macwlo-a instructions.
1560 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1562 * dvp-opc.c, fixed encoding of a bunch of instructions to
1563 be consistent with the asmvu assembler (and inconsistent
1564 with the specification).
1566 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1568 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1569 in the opcode table. The pkemscalf instruction must come first.
1571 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1573 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1576 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1578 * m32r-opc.h (HAVE_CPU_M32R): Define.
1581 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1583 * dvp-dis.c, dvp-opc.c: New files.
1584 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1585 * configure: Regenerate.
1586 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1587 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1588 (mips-dis.lo): Compile with @archdefs@.
1589 * Makefile.in: Regenerate.
1590 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1591 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1594 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1596 * v850-opc.c (insertion routines): If both alignment and size is
1597 wrong then report this.
1599 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1601 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1602 Only recognize instructions for the current target_processor.
1604 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1606 * d10v-dis.c (PC_MASK): Correct value.
1607 (print_operand): If there's a reloc, don't calculate the
1608 address because they could be in different sections.
1610 start-sanitize-cygnus
1611 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1613 * cgen.sh: Rewrite to be like simulator's version.
1614 * Makefile.am (cgen): Update call to cgen.sh.
1615 * Makefile.in: Regenerate
1618 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1620 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1621 instruction after the 4650's "mul" instruction; nobody's using the
1622 4010 these days. If object files someday indicate which processor
1623 variant they're intended for, we can do a better job at this.
1625 start-sanitize-r5900
1626 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1628 * mips-opc.c (c.lt.s): Add r5900 variant.
1632 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1634 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1635 table provided entry size. Use CGEN_INSN_MNEMONIC.
1636 (cgen_parse_keyword): Rewrite.
1637 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1638 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1639 * cgen-opc.c: Clean up pass over `struct foo' usage.
1640 (cgen_keyword_lookup_value): Handle "" entry.
1641 (cgen_keyword_add): Likewise.
1642 start-sanitize-cygnus
1643 * Makefile.am: Add cgen support.
1644 * Makefile.in: Regenerate.
1645 * configure.in: Add cgen support.
1646 * configure: Regenerate.
1647 * aclocal.m4: Regenerate.
1648 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1651 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1653 * mips-opc.c: Add FP_D to s.d instruction flags.
1655 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1657 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1659 start-sanitize-tic80
1660 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1662 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1663 PC relative offset forms before the 15 bit forms. An assembler command
1664 line option now chooses the default.
1667 start-sanitize-r5900
1668 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1670 * mips-opc.c: Add many missing r5900 instructions.
1673 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1675 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1676 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1678 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1680 * configure: Only build libopcodes shared if --enable-shared's value
1681 was `yes', or was set to `*opcodes*'.
1682 * aclocal.m4: Likewise.
1683 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1684 original source of this bit of code. It's not clear what the best fix
1687 start-sanitize-r5900
1688 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1690 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1692 start-sanitize-tic80
1693 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1695 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1696 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1697 offset forms before the 15 bit forms, to default to the long forms.
1700 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1702 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1704 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1706 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1707 symbol if none is present.
1708 (print_insn_big_arm): Prevent examination of stored symbol if
1711 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1713 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1715 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1717 * disassemble.c: Remove disasm_symaddr() function.
1719 * arm-dis.c: Use info->symbol instead of info->flags to determine
1720 if disassmbly should be in Thumb or Arm mode.
1722 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1724 * arm-dis.c: Add support for disassembling Thumb opcodes.
1725 (print_insn_thumb): New function.
1727 * disassemble.c (disasm_symaddr): New function.
1729 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1730 (thumb_opcodes): Table of Thumb opcodes.
1732 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1734 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1736 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1737 and 'v' as operand types.
1739 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1741 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1742 <olivier.carmona@di.epfl.ch>.
1743 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1744 which has a two word opcode with a one word argument.
1746 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1748 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1749 unsigned, not signed.
1750 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1752 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1754 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1755 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1756 (ftrv): Slay the cut-and-paste monster.
1758 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1760 * d10v-dis.c (print_operand):
1761 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1763 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1765 * d10v-opc.c (OPERAND_FLAG): Split into:
1766 (OPERAND_FFLAG, OPERAND_CFLAG) .
1770 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1772 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1773 field for all INSN_MACRO's.
1774 * mips16-opc.c: same
1776 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1778 * mips-opc.c (sync,cache): These are 3900 insns.
1780 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1782 sh-opc.h (sh_table): Remove ftst/nan.
1784 start-sanitize-cygnus
1785 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1787 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1788 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1790 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1794 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1796 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1797 Add tx49 insns and configury.
1800 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1802 * mips-opc.c (ffc, ffs): Fix mask.
1804 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1806 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1809 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1811 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1812 start-sanitize-cygnus
1813 Added VR5400 instructions.
1814 (N5): New cpu-id macro.
1816 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1818 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1820 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1821 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1823 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1825 * v850-dis.c (disassemble): Replace // with /* ... */
1827 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1829 * sparc-opc.c: Add wr & rd for v9a asr's.
1830 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1831 (v9a_asr_reg_names): New variable.
1832 Patch from David Miller <davem@vger.rutgers.edu>.
1834 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1836 * sparc-opc.c (v9notv9a): New insn type.
1837 (IMPDEP): Move to the end to not conflict with edge8 et al.
1838 Patch from David Miller <davem@vger.rutgers.edu>.
1840 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1842 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1844 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1846 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1848 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1850 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1851 of disassemble_info structure to determine if an overlay address
1852 has a matching symbol in low memory.
1854 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1855 new symbol_at_address_func field in disassemble_info structure.
1857 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1859 * v850-opc.c (extract_d22): Use signed arithmatic.
1861 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1863 * mips-opc.c: Three op mult is not an ISA insn.
1865 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1867 * mips-opc.c: Fix formatting.
1869 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1871 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1872 than assuming that char is signed. Explicitly sign extend 16 bit
1873 values, rather than assuming that short is 16 bits.
1874 (OP_sI, OP_J, OP_DIR): Likewise.
1876 start-sanitize-v850e
1877 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1879 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1883 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1885 * v850-opc.c: Fix typo in comment.
1887 * v850-dis.c (disassemble): Add test of processor type when
1888 determining opcodes.
1890 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1892 * configure.in: Use a diversion to set enable_shared before the
1893 arguments are parsed.
1894 * configure: Rebuild.
1896 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1898 * m68k-opc.c (TBL1): Use ! rather than `.
1899 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1901 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1905 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1907 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1910 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1911 * aclocal.m4: Rebuild with new libtool.
1912 * configure: Rebuild.
1914 start-sanitize-v850e
1915 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1917 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1920 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1922 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1924 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1926 * v850-opc.c (v850_opcodes): Further rearrangements.
1928 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1930 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1932 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1934 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1937 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1939 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1941 * mips16-opc.c: Added mips16 sdbbp.
1944 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1946 * v850-opc.c: Initialise processors field of v850_opcode structure.
1948 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1950 Merge changes from Martin Hunt:
1952 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1954 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1955 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1956 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1958 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1960 * d30v-dis.c (print_insn): First operand of d*i (delayed
1961 branch) instructions is relative.
1963 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1964 (d30v_operand_table): Add IMM6S3 type.
1965 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1967 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1968 and cmp instructions.
1970 * d30v-opc.c: Correct entries for repeat*, and sat*.
1971 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1972 types. Correct several formats.
1974 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1976 * d30v-opc.c (pre_defined_registers): Change control registers.
1978 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1979 SHORT_C2. Manual was incorrect.
1981 * d30v-dis.c (lookup_opcode): Return value now indicates
1982 if an opcode has a short and a long form. Used for deciding
1983 to append a ".s" or ".l".
1984 (print_insn): Append a ".s" to an instruction if it is
1985 the short form and ".l" if it is a long form. Do not append
1986 anything if the instruction has only one possible size.
1988 * d30v-opc.c: Change mulx2h to require an even register.
1989 New form: SHORT_A2; a SHORT_A form that needs an even
1990 register as the first operand.
1992 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1993 instruction was not being disassembled if there were an odd
1994 number of instructions.
1996 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1998 start-sanitize-v850e
1999 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2001 * v850-dis.c (disassemble): Improved display of register lists.
2004 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2006 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2007 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2008 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2009 fandnot1s, fandnot2s.
2011 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2013 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2015 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2017 * cgen-asm.c (cgen_parse_address): New argument resultp.
2018 All callers updated.
2019 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2021 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2023 * mn10200-dis.c (disassemble): PC relative instructions are
2024 relative to the next instruction, not the current instruction.
2026 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2028 * v850-dis.c (disassemble): Only signed extend values that are not
2029 returned by extract functions.
2030 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2032 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2034 * v850-opc.c: Update comments. Remove use of
2035 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2037 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2039 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2041 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2043 * configure: Rebuilt with latest devo autoconf for NT support.
2045 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2047 * v850-dis.c (disassemble): Use curly brace syntax for register
2050 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2051 where r0 is being used as a destination register.
2053 start-sanitize-v850e
2054 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2056 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2059 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2061 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2062 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2063 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2064 Add insns to access SGR and DBR.
2065 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2067 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2069 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2071 start-sanitize-v850e
2072 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2074 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2075 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2078 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2080 * configure (cgen_files): Add support for v850e target.
2081 * configure.in (cgen_files): Add support for v850e target.
2083 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2085 * configure (cgen_files): Add support for v850ea target.
2086 * configure.in (cgen_files): Add support for v850ea target.
2089 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2091 * configure.in (bfd_arc_arch): Add.
2092 * configure: Rebuild.
2093 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2094 * Makefile.in: Rebuild.
2095 * arc-dis.c, arc-opc.c: New files.
2096 * disassemble.c (ARCH_all): Define ARCH_arc.
2097 (disassembler): Add ARC support.
2099 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2101 start-sanitize-v850e
2102 * v850-dis.c (disassemble): Add support for v850EA instructions.
2104 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2105 (v850_opcodes): Add v850EA instructions.
2107 * v850-dis.c (disassemble): Add support for v850E instructions.
2109 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2110 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2111 insert_spe, extract_spe): New Functions.
2112 (v850_opcodes): Add v850E instructions.
2115 * v850-opc.c: Reorganised and re-layed out to improve readability
2118 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2120 * configure: Rebuild with autoconf 2.12.1.
2122 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2124 * aclocal.m4, configure: Rebuild with new automake patches.
2126 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2128 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2129 * acinclude.m4: Just include acinclude.m4 from BFD.
2130 * aclocal.m4, configure: Rebuild.
2132 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2134 * Makefile.am: New file, based on old Makefile.in.
2135 * acconfig.h: New file.
2136 * acinclude.m4: New file.
2137 * stamp-h.in: New file.
2138 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2139 Removed shared library handling; now handled by libtool. Replace
2140 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2141 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2142 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2143 handling in AC_OUTPUT.
2144 * dep-in.sed: Change .o to .lo.
2145 * Makefile.in: Now built with automake.
2146 * aclocal.m4: Now built with aclocal.
2147 * config.in, configure: Rebuild.
2149 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2151 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2153 start-sanitize-r5900
2154 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2156 * mips-opc.c: Fix coding of mtsa.
2159 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2161 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2163 * sparc-dis.c (sorted_opcodes): New static local.
2164 (struct opcode_hash): `opcode' is pointer to const element.
2165 (build_hash): First arg is now table of sorted pointers.
2166 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2167 (compare_opcodes): Update.
2169 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2171 * cgen-opc.c: #include <ctype.h>.
2172 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2173 Handle case insensitive hashing.
2174 (hash_keyword_value): Change type of `value' to unsigned int.
2176 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2178 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2179 precision FP, mark it as such. Likewise for double precision
2180 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2182 start-sanitize-r5900
2183 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2186 start-sanitize-r5900
2187 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2189 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2190 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2193 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2195 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2197 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2198 nesting depth when all the macros are expanded.
2200 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2202 * sparc-opc.c: The fcmp v9a instructions take an integer register
2203 as a destination, not a floating point register. From Christian
2204 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2206 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2208 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2209 syntax. From Roman Hodek
2210 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2212 * i386-dis.c (twobyte_has_modrm): Fix pand.
2214 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2216 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2218 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2220 * arm-dis.c: Add prototypes for arm_decode_shift and
2223 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2225 * mips-opc.c: Add r3900 insns.
2227 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2229 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2230 print delay slot instructions on the same line. When using a PC
2231 relative load, add a comment with the value being loaded if it can
2234 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2236 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2237 to pushS/popS for segment regs and byte constant so that
2238 pushw/popw printed when in 16 bit data mode.
2240 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2241 print cbtw, cwtd in 16 bit data mode.
2242 * i386-dis.c (putop): extra case W to support above.
2244 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2245 address size prefix in 16 bit address mode.
2247 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2249 * sh-dis.c: Reindent. Rename local variable fprintf to
2252 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2254 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2256 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2258 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2260 * mips16-opc.c (mip16_opcodes): same.
2262 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2264 * m68k-opc.c (moveb): Change $d to %d.
2266 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2268 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2269 (twobyte_has_modrm): Likewise.
2271 (OP_MMX, OP_EM, OP_MS): New static functions.
2273 * i386-dis.c: Revert patch of April 4. The output now matches
2276 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2278 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2281 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2283 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2285 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2287 * Makefile.in (install): Depend upon installdirs.
2288 (installdirs): New target.
2290 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2292 From Thomas Graichen <graichen@rzpd.de>:
2293 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2294 * configure: Rebuild.
2296 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2298 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2299 Delete string{,s}.h support.
2301 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2303 * cgen-asm.c (cgen_parse_operand_fn): New global.
2304 (cgen_parse_{{,un}signed_integer,address}): Update call to
2305 cgen_parse_operand_fn.
2306 (cgen_init_parse_operand): New function.
2307 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2308 from cgen_asm_init_parse.
2309 (m32r_cgen_assemble_insn): New operand `errmsg'.
2310 Delete call to as_bad, return error message to caller.
2311 (m32r_cgen_asm_hash_keywords): #if 0 out.
2313 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2315 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2317 [case 'J']: Fix typo in register name.
2319 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2321 * configure.in: Substitute SHLIB_LIBS.
2322 * configure: Rebuild.
2323 * Makefile.in (SHLIB_LIBS): New variable.
2324 ($(SHLIB)): Use $(SHLIB_LIBS).
2326 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2328 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2330 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2332 * disassemble.c (disassembler): Handle m32r.
2334 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2336 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2337 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2338 * Makefile.in (CFILES): Add them.
2339 (ALL_MACHINES): Add them.
2340 (dependencies): Regenerate.
2341 * configure.in (cgen_files): New variable.
2342 (bfd_m32r_arch): Add entry.
2343 * configure: Regenerate.
2345 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2347 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2348 * configure: Rebuild.
2350 * Makefile.in: Rebuild dependencies.
2352 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2354 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2357 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2359 * Branched binutils 2.8.
2361 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2363 * m10200-dis.c: Rename from mn10200-dis.c.
2364 * m10200-opc.c: Rename from mn10200-opc.c.
2365 * m10300-dis.c: Rename from mn10300-dis.c
2366 * m10300-opc.c: Rename from mn10300-opc.c.
2367 * Makefile.in: Update accordingly.
2369 * mips16-opc.c: Add mul and dmul macros.
2371 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2373 * makefile.vms: Update CFLAGS, add clean target.
2375 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2377 * mips-opc.c: Add "wait". From Ralf Baechle
2378 <ralf@gnu.ai.mit.edu>.
2380 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2381 * configure, config.in: Rebuild.
2382 * sysdep.h: Include <stdlib.h> if it exists.
2383 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2385 * Makefile.in: Rebuild dependencies.
2387 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2389 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2390 Andrew Bray <andy@madhouse.demon.co.uk>.
2392 * mips-opc.c: Add cast when setting mips_opcodes.
2394 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2396 * v850-dis.c (disassemble): Fix sign extension problem.
2397 * v850-opc.c (extract_d*): Fix sign extension problems to make
2398 disassembly calculate branch offsets correctly.
2400 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2402 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2404 * mips-opc.c: Add dctr and dctw.
2406 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2408 * d30v-dis.c (print_insn): Change the way signed constants
2411 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2413 * Makefile.in (BFD_H): New variable.
2414 (HFILES): New variable.
2415 (CFILES): Add all C files.
2416 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2417 Delete old dependencies, and build new ones.
2418 * dep-in.sed: New file.
2420 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2422 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2424 start-sanitize-coldfire
2425 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2427 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2430 end-sanitize-coldfire
2431 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2433 * mn10200-opc.c: Change "trap" to "syscall".
2434 * mn10300-opc.c: Add new "syscall" instruction.
2436 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2438 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2439 mulul insns on the coldfire.
2441 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2443 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2444 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2445 (print_insn_little_arm): Likewise.
2447 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2449 Based on patches from H.J. Lu <hjl@lucon.org>:
2450 * i386-dis.c (fetch_data): Add prototype.
2451 * m68k-dis.c (fetch_data): Add prototype.
2452 (dummy_print_address): Add prototype. Make static.
2453 * ppc-opc.c (valid_bo): Add prototype.
2454 * sparc-dis.c (build_hash_table): Add prototype.
2455 (is_delayed_branch, compute_arch_mask): Add prototypes.
2456 (print_insn_sparc): Make several local variables const.
2457 (compare_opcodes): Change arguments to const PTR. Add prototype.
2458 * sparc-opc.c (arg): Change name field to be const.
2459 (lookup_name, lookup_value): Add prototypes. Change table and
2460 name parameters to be const.
2461 (sparc_encode_asi): Change name parameter to be const.
2462 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2463 (sparc_encode_sparclet_cpreg): Likewise.
2464 (sparc_decode_asi): Change return type to be const.
2465 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2466 (sparc_decode_sparclet_cpreg): Likewise.
2468 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2470 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2471 Solaris doesn't like the combined options, and the -f is
2473 (stamp-tshlink, install): Likewise.
2475 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2477 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2480 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2482 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2484 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2486 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2489 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2491 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2493 start-sanitize-tic80
2494 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2496 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2498 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2500 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2503 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2505 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2506 floatformat_to_double to make portable.
2507 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2510 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2512 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2513 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2515 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2517 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2518 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2520 start-sanitize-tic80
2521 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2523 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2524 (OFF_SL_BR_SCALED): ... to this, and added the flag
2525 TIC80_OPERAND_BASEREL to the flags word.
2526 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2530 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2532 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2533 Change mips_opcodes from const array to a pointer,
2534 and change bfd_mips_num_opcodes from const int to int,
2535 so that we can increase the size of the mips opcodes table
2538 start-sanitize-tic80
2539 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2541 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2542 store BITNUM values in the table in one's complement form
2543 to match behavior when assembler is given a raw numeric
2544 value for a BITNUM operand.
2545 * tic80-dis.c (print_operand_bitnum): Ditto.
2548 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2550 * d30v-opc.c: Removed references to FLAG_X.
2552 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2554 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2556 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2558 * Makefile.in: Added d30v object files.
2559 * configure: (bfd_d30v_arch) Rebuilt.
2560 * configure.in: (bfd_d30v_arch) Added new case.
2561 * d30v-dis.c: New file.
2562 * d30v-opc.c: New file.
2563 * disassemble.c (disassembler) Add entry for d30v.
2565 start-sanitize-tic80
2566 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2568 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2569 representations for the floating point BITNUM values.
2571 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2573 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2574 in the table in one's complement form, as they appear in the
2576 (tic80_symbol_to_value): Use macros to access predefined
2578 (tic80_value_to_symbol): Ditto.
2579 (tic80_next_predefined_symbol): New function.
2580 * tic80-dis.c (print_operand_bitnum): Remove code that did
2581 one's complement for BITNUM values.
2584 start-sanitize-r5900
2585 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2587 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2590 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2592 * makefile.vms: Remove 8 bit characters. Update to latest
2595 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2597 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2599 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2601 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2602 (IMM24_PCREL): Likewise.
2604 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2606 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2607 address for an extended PC relative instruction that is not a
2610 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2612 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2615 start-sanitize-tic80
2616 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2618 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2619 (tic80_opcodes): Sort entries so that long immediate forms
2620 come after short immediate forms, making it easier for
2621 assembler to select the right one for a given operand.
2624 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2626 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2628 (print_insn_mips16): Likewise.
2630 start-sanitize-r5900
2631 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2633 * mips-opc.c: add r5900.
2636 start-sanitize-tic80
2637 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2639 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2640 a symbol class that restricts translation to just that
2641 class (general register, condition code, etc).
2643 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2645 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2646 and REG_DEST_E for register operands that have to be
2647 an even numbered register. Add REG_FPA for operands that
2648 are one of the floating point accumulator registers.
2649 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2650 (tic80_opcodes): Change entries that need even numbered
2651 register operands to use the new operand table entries.
2652 Add "or" entries that are identical to "or.tt" entries.
2655 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2657 * mips16-opc.c: Add new cases of exit instruction for
2659 * mips-dis.c (print_mips16_insn_arg): Display floating point
2660 registers in operands of exit instruction. Print `$' before
2661 register names in operands of entry and exit instructions.
2663 start-sanitize-tic80
2664 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2666 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2667 pairs for all predefined symbols recognized by the assembler.
2668 Also used by the disassembling routines.
2669 (tic80_symbol_to_value): New function.
2670 (tic80_value_to_symbol): New function.
2671 * tic80-dis.c (print_operand_control_register,
2672 print_operand_condition_code, print_operand_bitnum):
2673 Remove private tables and use tic80_value_to_symbol function.
2676 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2678 * d10v-dis.c (print_operand): Change address printing
2679 to correctly handle PC wrapping. Fixes PR11490.
2681 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2683 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2686 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2688 * mips-dis.c (print_insn_mips16): Set insn_info information.
2689 (print_mips16_insn_arg): Likewise.
2691 * mips-dis.c (print_insn_mips16): Better handling of an extend
2692 opcode followed by an instruction which can not be extended.
2694 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2696 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2697 coldfire moveb instruction to not allow an address register as
2698 destination. Although the documentation does not indicate that
2699 this is invalid, experiments uncovered unexpected behavior.
2700 Added a comment explaining the situation. Thanks to Andreas
2701 Schwab for pointing this out to me.
2703 start-sanitize-tic80
2704 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2706 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2707 entries are presorted so that entries with the same mnemonic are
2708 adjacent to each other in the table. Sort the entries for each
2709 instruction so that this is true.
2712 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2714 * m68k-dis.c: Include <libiberty.h>.
2715 (print_insn_m68k): Sort the opcode table on the most significant
2716 nibble of the opcode.
2718 start-sanitize-tic80
2719 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2721 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2722 "vsub", "vst", "xnor", and "xor" instructions.
2723 (V_a1): Renamed from V_a, msb of accumulator reg number.
2724 (V_a0): Add macro, lsb of accumulator reg number.
2726 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2728 * tic80-dis.c (print_insn_tic80): Broke excessively long
2729 function up into several smaller ones and arranged for
2730 the instruction printing function to be callable recursively
2731 to print vector instructions that have both a load and a
2732 math instruction packed into a single opcode.
2733 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2734 to explain why it comes after the other vector opcodes.
2737 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2739 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2740 move insns to handle immediate operands.
2742 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2744 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2745 fix operand mask in the "moveml" entries for the coldfire.
2747 start-sanitize-tic80
2748 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2750 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2751 New macros for building vector instruction opcodes.
2752 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2753 FMT_LI, which were unused. The field is now a flags field.
2754 Remove some opcodes that are possible, but illegal, such
2755 as long immediate instructions with doubles for immediate
2756 values. Add "vadd" and "vld" instructions.
2758 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2760 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2761 the order more logical. Move the shift alias instructions ("rotl",
2762 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2763 interspersed with the regular sr.x and sl.x instructions. Add
2764 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2765 "sub", "subu", "swcr", and "trap".
2767 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2769 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2770 (OFF_SL_PC): Renamed from OFF_SL.
2771 (OFF_SS_BR): New operand type for base relative operand.
2772 (OFF_SL_BR): New operand type for base relative operand.
2773 (REG_BASE): New operand type for base register operand.
2774 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2775 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2776 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2778 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2779 10 char field, padded with spaces on rhs, rather than a string
2780 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2781 than old TIC80_OPERAND_RELATIVE. Add support for new
2782 TIC80_OPERAND_BASEREL flag bit.
2784 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2786 * tic80-dis.c (print_insn_tic80): Print floating point operands
2788 * tic80-opc.c (SPFI): Add single precision floating point
2789 immediate operand type.
2790 (ROTATE): Add rotate operand type for shifts.
2791 (ENDMASK): Add for shifts.
2792 (n): Macro for the 'n' bit.
2793 (i): Macro for the 'i' bit.
2794 (PD): Macro for the 'PD' field.
2795 (P2): Macro for the 'P2' field.
2796 (P1): Macro for the 'P1' field.
2797 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2801 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2803 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2804 adding in current address for pc-relative operands.
2806 start-sanitize-tic80
2807 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2809 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2810 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2811 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2812 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2813 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2814 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2815 (REG_SCALED, LSI_SCALED): New operand types.
2816 (E): New macro for 'E' bit at bit 27.
2817 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2818 opcodes, including the various size flavors (b,h,w,d) for
2819 the direct load and store instructions.
2821 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2823 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2825 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2826 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2827 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2828 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2829 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2830 masks with "MASK_* & ~M_*" to get the M bit reset.
2831 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2833 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2835 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2836 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2837 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2839 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2840 CC, SICR, and LICR table entries.
2841 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2842 "bcnd", and "brcr" opcodes.
2845 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2847 * ppc-opc.c (powerpc_operands): Make comment match the
2848 actual fields (no shift field).
2849 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2850 start-sanitize-tic80
2851 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2852 partial implementation, work in progress.
2853 * tic80-opc.c (tic80_operands): Begin construction operands table.
2854 (tic80_opcodes): Continue populating opcodes table and start
2855 filling in the operand indices.
2856 (tic80_num_opcodes): Add this.
2859 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2861 * m68k-opc.c: Add #B case for moveq.
2863 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2865 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2866 before they are used.
2868 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2870 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2871 for "breakpoint" instruction.
2873 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2875 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2876 (dep): Use ALL_CFLAGS rather than CFLAGS.
2878 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2880 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2883 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2885 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2886 start-sanitize-tic80
2887 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2890 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2892 * mips16-opc.c: Add "abs".
2894 start-sanitize-tic80
2895 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2897 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2898 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2899 (disassembler): Add bfd_arch_tic80 support to set disassemble
2900 to print_insn_tic80.
2901 * tic80-dis.c (print_insn_tic80): Add stub.
2903 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2905 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2906 * configure: Regenerate with autoconf.
2907 * tic80-dis.c: Add file.
2908 * tic80-opc.c: Add file.
2911 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2913 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2915 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2917 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2918 (mn10200_opcodes): Use it for some logicals and btst insns.
2919 Add "break" and "trap" instructions.
2921 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2923 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2925 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2927 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2928 relative load or add now depends upon whether the instruction is
2931 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2933 * mn10200-dis.c: Finish writing disassembler.
2934 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2935 Fix mask for "jmp (an)".
2937 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2938 handle endianness issues for mn10300.
2940 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2942 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2944 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2945 instruction. Fix opcode field for "movb (imm24),dn".
2947 * mn10200-opc.c (mn10200_operands): Fix insertion position
2950 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2952 * mn10200-opc.c: Create mn10200 opcode table.
2953 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2954 but moving along nicely.
2956 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2958 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2960 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2962 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2963 specifiers for fmovem* instructions.
2965 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2967 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2969 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2971 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2974 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2976 * mn10300-opc.c: Add some comments explaining the various
2979 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2981 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2983 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2986 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2987 operand specifiers in fmovm* instructions.
2989 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2991 * ppc-opc.c (insert_li): Give an error if the offset has the two
2992 least significant bits set.
2994 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2996 * mips-dis.c (print_insn_mips16): Separate the instruction from
2997 the arguments with a tab, not a space.
2999 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3001 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3004 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3007 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3009 * configure: Rebuild with autoconf 2.12.
3011 Add support for mips16 (16 bit MIPS implementation):
3012 * mips16-opc.c: New file.
3013 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3014 (mips16_reg_names): New static array.
3015 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3016 after seeing a 16 bit symbol.
3017 (print_insn_little_mips): Likewise.
3018 (print_insn_mips16): New static function.
3019 (print_mips16_insn_arg): New static function.
3020 * mips-opc.c: Add jalx instruction.
3021 * Makefile.in (mips16-opc.o): New target.
3022 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3023 * configure: Rebuild.
3025 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3027 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3028 operand specifiers in *save, *restore and movem* instructions.
3030 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3033 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3034 register operands for immediate arithmetic, not, neg, negx, and
3035 set according to condition instructions.
3037 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3038 specifier of the effective-address operand in immediate forms of
3039 arithmetic instructions. The specifier for the immediate operand
3040 notes how and where the constant will be stored.
3042 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3044 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3047 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3050 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3052 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3054 * mn10300-dis.c (disassemble): Handle register lists.
3056 * mn10300-opc.c: Fix handling of register list operand for
3057 "call", "ret", and "rets" instructions.
3059 * mn10300-dis.c (disassemble): Print PC-relative and memory
3060 addresses symbolically if possible.
3061 * mn10300-opc.c: Distinguish between absolute memory addresses,
3062 pc-relative offsets & random immediates.
3064 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3066 (disassemble): Handle SPLIT and EXTENDED operands.
3068 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3070 * mn10300-dis.c: Rough cut at printing some operands.
3072 * mn10300-dis.c: Start working on disassembler support.
3073 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3075 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3077 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3079 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3081 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3083 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3085 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3086 register argument is calls and jmp instructions.
3088 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3090 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3091 getx operand. Fix opcode for mulqu imm,dn.
3093 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3095 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3096 in MN10300_OPERAND_SPLIT operands for how many bits
3097 appear in the basic insn word. Add IMM32_HIGH24,
3098 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3099 (mn10300_opcodes): Use new operands as needed.
3101 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3102 for bset, bclr, btst instructions.
3103 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3105 * mn10300-opc.c (mn10300_operands): Remove many redundant
3106 operands. Update opcode table as appropriate.
3107 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3108 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3110 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3112 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3113 operands (for indexed load/stores). Fix bitpos for DI
3114 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3115 few instructions that insert immediates/displacements in the
3116 middle of the instruction. Add IMM8E for 8 bit immediate in
3117 the extended part of an instruction.
3118 (mn10300_operands): Use new opcodes as appropriate.
3120 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3122 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3123 sequential so the assembler never parallelizes it with
3126 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3128 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3129 a data/address register that appears in register field 0
3130 and register field 1.
3131 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3133 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3135 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3136 standard disassembly.
3138 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3139 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3140 Recategorize PALcode instructions.
3142 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3144 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3146 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3148 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3149 there are no operand types.
3151 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3153 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3155 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3157 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3159 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3161 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3163 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3164 and sst.w instructions.
3166 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3169 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3171 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3174 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3176 * ppc-opc.c (PPCPWR2): Define.
3177 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3180 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3182 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3183 field for movhu instruction.
3185 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3186 cast value to "long" not "signed long" to keep hpux10
3189 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3191 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3194 * mn10300-opc.c (FMT*): Remove definitions.
3196 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3197 for shift-by-register opcodes.
3199 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3200 into [AD][MN][01] for encoding the position of the register
3203 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3205 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3206 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3208 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3210 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3211 Fix various typos. Add "PAREN" operand.
3212 (MEM, MEM2): Define.
3213 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3214 operands. Fix several typos.
3216 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3219 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3221 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3222 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3224 (mn10300_opcodes): Break opcode format out into its own field.
3225 Update many operand fields to deal with signed vs unsigned
3226 issues. Fix one or two typos in the "mov" instruction
3227 opcode, mask and/or operand fields.
3229 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3231 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3232 m68851 wasn't reset.
3234 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3236 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3237 all opcodes. Very rough cut at operands for all opcodes.
3239 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3242 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3244 * mn10200-opc.c, mn10300-opc.c: New files.
3245 * mn10200-dis.c, mn10300-dis.c: New files.
3246 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3247 * disassemble.c: Break mn10x00 support into 10200 and 10300
3249 * configure.in: Likewise.
3250 * configure: Rebuilt.
3252 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3254 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3256 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3258 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3260 * disassemble (ARCH_mn10x00): Define.
3261 (disassembler): Handle bfd_arch_mn10x00.
3262 * configure.in: Recognize bfd_mn10x00_arch.
3263 * configure: Rebuilt.
3265 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3267 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3268 accordingly. Don't declare functions using op_rtn.
3270 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3272 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3273 params to be more standard.
3274 * (disassemble): Print absolute addresses and symbolic names for
3275 branch and jump targets.
3276 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3278 * (v850_opcodes): Add breakpoint insn.
3280 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3282 * m68k-opc.c: Move the fmovemx data register cases before the
3283 other cases, so that they get recognized before the data register
3284 does gets treated as a degenerate register list.
3286 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * mips-opc.c: Add a case for "div" and "divu" with two registers
3289 and a destination of $0.
3291 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3293 * mips-dis.c (print_insn_arg): Add prototype.
3294 (_print_insn_mips): Ditto.
3296 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3298 * mips-dis.c (print_insn_arg): Print condition code registers as
3301 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3303 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3305 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3307 * v850-dis.c (disassemble): Make static. Provide prototype.
3309 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3311 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3314 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3316 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3317 ']' characters into the output stream.
3318 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3319 Add "memop" field to all opcodes (for the disassembler).
3320 Reorder opcodes so that "nop" comes before "mov" and "jr"
3321 comes before "jarl".
3323 * v850-dis.c (print_insn_v850): Fix typo in last change.
3325 * v850-dis.c (print_insn_v850): Properly handle disassembling
3326 a two byte insn at the end of a memory region when the memory
3327 region's size is only two byte aligned.
3329 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3331 * v850-dis.c (v850_reg_names): Define.
3332 (v850_sreg_names, v850_cc_names): Likewise.
3333 (disassemble): Very rough cut at printing operands (unformatted).
3335 * v850-opc.c (BOP_MASK): Fix.
3336 (v850_opcodes): Fix mask for jarl and jr.
3338 * v850-dis.c: New file. Skeleton for disassembler support.
3339 * Makefile.in Remove v850 references, they're not needed here.
3340 * configure.in: Add v850-dis.o when building v850 toolchains.
3341 * configure: Rebuilt.
3342 * disassemble.c (disassembler): Call v850 disassembler.
3344 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3345 (insert_d8_6, extract_d8_6): New functions.
3346 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3347 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3349 (IF4A, IF4B): Use "D7" instead of "D7S".
3350 (IF4C, IF4D): Use "D8_7" instead of "D8".
3351 (IF4E, IF4F): New. Use "D8_6".
3352 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3353 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3355 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3356 (v850_operands): Change D16 to D16_15, use special insert/extract
3357 routines. New new D16 that uses the generic insert/extract code.
3358 (IF7A, IF7B): Use D16_15.
3359 (IF7C, IF7D): New. Use D16.
3360 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3362 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3363 message. Issue an error if the branch offset is odd.
3365 * v850-opc.c: Add notes about needing special insert/extract
3366 for all the load/store insns, except "ld.b" and "st.b".
3368 * v850-opc.c (insert_d22, extract_d22): New functions.
3369 (v850_operands): Use insert_d22 and extract_d22 for
3371 (insert_d9): Fix range check.
3373 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3375 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3376 and set bits field to D9 and D22 operands.
3378 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3380 * v850-opc.c (v850_operands): Define SR2 operand.
3381 (v850_opcodes): "ldsr" uses R1,SR2.
3383 * v850-opc.c (v850_opcodes): Fix opcode specs for
3384 sld.w, sst.b, sst.h, sst.w, and nop.
3386 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3388 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3389 end of the opcode table.
3391 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3393 * d10v-opc.c (pre_defined_registers): Added register pairs,
3394 "r0-r1", "r2-r3", etc.
3396 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3398 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3399 Create I16U for an unsigned 16bit mmediate operand.
3400 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3402 * v850-opc.c (v850_operands): Define EP operand.
3403 (IF4A, IF4B, IF4C, IF4D): Use EP.
3405 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3406 with immediate operand, "movhi". Tweak "ldsr".
3408 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3409 correct. Get sld.[bhw] and sst.[bhw] closer.
3411 * v850-opc.c (v850_operands): "not" is a two byte insn
3413 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3415 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3417 * v850-opc.c (two): Get order of words correct.
3419 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3421 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3422 register source and destination operands.
3423 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3425 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3426 same thinko in "trap" opcode.
3428 * v850-opc.c (v850_opcodes): Add initializer for size field
3431 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3432 Add D8 for 8-bit unsigned field in short load/store insns.
3433 (IF4A, IF4D): These both need two registers.
3434 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3435 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3436 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3437 for "ldsr" and "stsr".
3438 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3441 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3442 short store word (sst.w).
3444 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3446 * v850-opc.c (v850_operands): Added insert and extract fields,
3447 pointers to functions that handle unusual operand encodings.
3449 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3451 * v850-opc.c (v850_opcodes): Enable "trap".
3453 * v850-opc.c (v850_opcodes): Fix order of displacement
3454 and register for "set1", "clr1", "not1", and "tst1".
3456 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3458 * v850-opc.c (v850_operands): Add "B3" support.
3459 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3462 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3464 * v850-opc.c: Close unterminated comment.
3466 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3468 * v850-opc.c (v850_operands): Add flags field.
3469 (v850_opcodes): add move opcodes.
3471 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3473 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3474 * configure: (bfd_v850v_arch) Add new case.
3475 * configure.in: (bfd_v850_arch) Add new case.
3476 * v850-opc.c: New file.
3478 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3480 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3482 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3484 * d10v-opc.c: Add additional information to the opcode
3485 table to help determinine which instructions can be done
3488 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3490 * mpw-make.sed: Update editing of include pathnames to be
3493 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3495 * arm-opc.h: Added "bx" instruction definition.
3497 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3499 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3501 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3503 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3505 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3507 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3509 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3511 * makefile.vms: Update for alpha-opc changes.
3513 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3515 * i386-dis.c (print_insn_i386): Actually return the correct value.
3516 (ONE, OP_ONE): #ifdef out; not used.
3518 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3520 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3521 Changed subi operand type to treat 0 as 16.
3523 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3525 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3528 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3530 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3531 memory transfer instructions. Add new format string entries %h and %s.
3532 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3535 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3537 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3538 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3540 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3542 * alpha-dis.c (print_insn_alpha_osf): Remove.
3543 (print_insn_alpha_vms): Remove.
3544 (print_insn_alpha): Make globally visible. Chose the register
3545 names based on info->flavour.
3546 * disassemble.c: Always return print_insn_alpha for the alpha.
3548 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3550 * d10v-dis.c (dis_long): Handle unknown opcodes.
3552 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3554 * d10v-opc.c: Changes to support signed and unsigned numbers.
3555 All instructions with the same name that have long and short forms
3556 now end in ".l" or ".s". Divs added.
3557 * d10v-dis.c: Changes to support signed and unsigned numbers.
3559 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3561 * d10v-dis.c: Change all functions to use info->print_address_func.
3563 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3565 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3566 move ccr/sr insns more strict so that the disassembler only
3567 selects them when the addressing mode is data register.
3569 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3570 * d10v-opc.c (pre_defined_registers): Declare.
3571 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3572 to pick a better name for the registers.
3574 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3576 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3577 operands for fexpand and fpmerge. From Christian Kuehnke
3578 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3580 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3582 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3583 print routine. Take new regnames and cpumask arguments.
3584 Kill the environment variable nonsense.
3585 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3586 (print_insn_alpha_vms): New function. Do VMS style regnames.
3587 * disassemble.c (disassembler): Test bfd flavour to pick
3588 between OSF and VMS routines. Default to OSF.
3590 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3592 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3593 * configure: Rebuild.
3594 * Makefile.in (install): Use @INSTALL_SHLIB@.
3596 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3598 * configure: (bfd_d10v_arch) Add new case.
3599 * configure.in: (bfd_d10v_arch) Add new case.
3600 * d10v-dis.c: New file.
3601 * d10v-opc.c: New file.
3602 * disassemble.c (disassembler) Add entry for d10v.
3604 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3606 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3607 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3609 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3611 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3612 distinguish between variants of the instruction set.
3613 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3614 distinguish between variants of the instruction set.
3616 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3618 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3619 the 8086 instruction set.
3620 * i386-dis.c: General cleanups. Make most things static. Add
3621 prototypes. Get rid of static variables aflags and dflags. Pass
3622 them as args (to almost everything).
3624 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3626 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3628 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3630 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3631 if the next arg is marked with SRC_IN_DST. Gross.
3633 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3634 we're looking for and find EXR.
3636 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3637 if we're looking for KBIT and we don't find it.
3639 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3642 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3643 3bit immediate operands.
3645 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3647 * Released binutils 2.7.
3649 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3650 <kkaempf@progis.ac-net.de>.
3652 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3654 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3656 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3658 * sparc-dis.c (print_insn_sparclite): New routine to print
3659 sparclite instructions.
3661 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3663 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3665 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3667 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3668 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3669 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3671 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3673 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3674 Use autoconf-set values.
3675 (docdir, oldincludedir): Removed.
3676 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3678 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3680 * alpha-opc.c: New file.
3681 * alpha-opc.h: Remove.
3682 * alpha-dis.c: Complete rewrite to use new opcode table.
3683 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3684 * configure: Rebuild with autoconf 2.10.
3685 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3686 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3688 (alpha-opc.o): New target.
3690 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3692 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3693 Set imm_added_to_rs1 even if the source and destination register
3696 * sparc-opc.c: Add some two operand forms of the wr instruction.
3698 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3700 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3703 * disassemble.c (disassembler): Handle H8/S.
3704 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3706 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3708 * sparc-opc.c: Add beq/teq as aliases for be/te.
3710 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3711 <sergei@msil.sps.mot.com>.
3713 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3715 * makefile.vms: New file.
3717 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3719 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3721 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3724 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3726 * i386-dis.c (OP_OFF): Call append_prefix.
3728 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3730 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3731 unsigned long to silence a warning from the Solaris PowerPC
3734 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3736 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3738 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3740 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3742 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3743 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3744 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3745 cpush, cpusha, cpull sparclet insns.
3747 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3749 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3751 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3753 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3754 Set F_FLOAT on other floating point instructions.
3756 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3758 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3760 (powerpc_opcodes): Add 860/821 specific SPRs.
3762 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3764 * configure.in: Permit --enable-shared to specify a list of
3765 directories. Set and substitute BFD_PICLIST.
3766 * configure: Rebuild.
3767 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3768 uses. Set to @BFD_PICLIST@.
3770 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3772 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3773 not "abs", which may be needed for the absolute in something
3774 like btst #0,@10:8. Print L_3 immediates separately from other
3775 immediates. Change ABSMOV reference to ABS8MEM.
3777 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3779 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3780 (current_arch_mask): New static global.
3781 (compute_arch_mask): New static function.
3782 (print_insn_sparc): Delete sparc_v9_p. New static local
3783 current_mach. Resort opcode table if current_mach changes.
3784 Generalize "insn not supported" test.
3785 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3786 Delete test for v9/!v9.
3787 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3789 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3790 (brfcx): Renamed to FBRX.
3791 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3792 coprocessor mnemonics are not supported on the sparclet).
3793 (condf): Renamed to CONDF.
3794 (SLCBCC2): Delete F_ALIAS flag.
3796 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3798 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3799 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3801 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3803 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3804 that the shared library version number is set correctly.
3806 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3808 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3809 Miles Bader <miles@gnu.ai.mit.edu>.
3810 * configure: Rebuild.
3812 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3814 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3817 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3819 * configure: Rebuild with autoconf 2.8.
3821 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3823 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3824 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3826 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3828 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3829 since they appear as targets in Makefile.in.
3830 * configure: Rebuild.
3832 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3834 * mpw-make.sed: Edit out shared library support bits.
3836 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3838 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3839 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3840 (sparc_opcodes): Add sparclet insns.
3841 (sparclet_cpreg_table): New static local.
3842 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3843 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3845 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3847 * i386-dis.c (index16): New static variable.
3848 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3850 (OP_indirE): Return result of OP_E.
3851 (OP_E): Check for 16 bit addressing mode, and disassemble
3852 correctly. Optimised 32 bit case a little. Don't print
3853 "(base,index,scale)" when sib specifies only an offset.
3855 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3857 * configure.in: Set and substitute SHLIB_DEP.
3858 * configure: Rebuild.
3859 * Makefile.in (SHLIB_DEP): New variable.
3860 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3861 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3862 COMMON_SHLIB, add them to piclist with appropriate modifications.
3863 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3864 here: just use piclist.
3866 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3868 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3869 (print_insn_sparc): Rewrite v9/not-v9 tests.
3870 (compare_opcodes): Likewise.
3871 * sparc-opc.c (MASK_<ARCH>): Define.
3872 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3873 (sparclet,v6notv9): Define.
3874 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3875 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3877 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3879 * configure.in: Call AC_PROG_CC before configure.host.
3880 * configure: Rebuild.
3882 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3884 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3886 * i386-dis.c (onebyte_has_modrm): New static array.
3887 (twobyte_has_modrm): New static array.
3888 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3890 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3892 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3895 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3897 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3900 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3902 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3903 m68010up, not just m68020up | cpu32.
3905 * Makefile.in (SONAME): New variable.
3906 ($(SHLINK)): Make a link to the transformed name, as well.
3907 (stamp-tshlink): New target.
3908 (install): Skip stamp-tshlink during install.
3910 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3912 * configure.in: Call AC_ARG_PROGRAM.
3913 * configure: Rebuild.
3914 * Makefile.in (program_transform_name): New variable.
3915 (install): Transform library name before installing it.
3917 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3919 * i960-dis.c (mem): Add HX dcinva instruction.
3921 Support for building as a shared library, based on patches from
3922 Alan Modra <alan@spri.levels.unisa.edu.au>:
3923 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3924 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3925 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3926 * configure: Rebuild.
3927 * Makefile.in (ALLLIBS): New variable.
3928 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3929 (COMMON_SHLIB, SHLINK): New variables.
3930 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3931 (STAGESTUFF): Remove variable.
3932 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3933 (stamp-piclist, piclist): New targets.
3934 ($(SHLIB), $(SHLINK)): New targets.
3935 ($(OFILES)): Depend upon stamp-picdir.
3936 (disassemble.o): Build twice if PICFLAG is set.
3937 (MOSTLYCLEAN): Add pic/*.o.
3938 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3939 (distclean): Remove pic and stamp-picdir.
3940 (install): Install shared libraries.
3941 (stamp-picdir): New target.
3943 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3945 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3946 Print unknown instruction as "unknown", rather than in hex.
3948 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3950 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3952 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3954 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3956 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3958 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3959 when necessary. From Ulrich Drepper
3960 <drepper@myware.rz.uni-karlsruhe.de>.
3962 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3964 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3965 sparc_num_opcodes. Update architecture enum values.
3966 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3967 (sparc_opcode_lookup_arch): New function.
3968 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3969 (sparc_opcodes): Add v9a shutdown insn.
3971 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3973 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3974 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3976 (print_insn_sparc64): Deleted.
3977 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3980 * sparc-opc.c (architecture_pname): Add v9a.
3982 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3984 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3985 incorrectly defined as 0x16 when it should be 0x15.
3986 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3987 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3988 excb (exception barrier) which is defined in the Alpha
3989 Architecture Handbook version 2.
3990 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3991 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3992 disassembled as or, for example.
3994 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3996 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3997 (_print_insn_mips): Change i from int to unsigned int.
3999 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4001 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4002 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4004 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4006 * i386-dis.c: Added Pentium Pro instructions.
4008 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4010 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4013 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4015 * sh-opc.h (sh_nibble_type): Added REG_B.
4016 (sh_arg_type): Added A_REG_B.
4017 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4019 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4021 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4023 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4025 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4027 * Makefile.in (distclean): Remove stamp-h. From Ronald
4028 F. Guilmette <rfg@monkeys.com>.
4030 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4032 From David Mosberger-Tang <davidm@azstarnet.com>:
4033 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4036 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4038 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4039 (sh_table): Added many SH3 opcodes.
4040 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4042 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4044 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4045 (subco,subco.): Mark this PPC, not PPCCOM.
4047 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4049 * configure: Rebuild with autoconf 2.7.
4051 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4053 * configure: Rebuild with autoconf 2.6.
4055 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4057 * configure.in: Sort list of architectures. Accept but do nothing
4058 for alliant, convex, pyramid, romp, and tahoe.
4060 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4062 * a29k-dis.c (print_special): Change num to unsigned int.
4064 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4066 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4069 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4071 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4072 * configure: Rebuilt.
4074 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4076 * configure.in: Add case for bfd_i860_arch.
4077 * configure: Rebuild.
4079 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4081 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4082 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4083 (NEXTDOUBLE): Likewise.
4084 (print_insn_m68k): Don't match fmoveml if there is more than one
4085 register in the list.
4086 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4088 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4090 * m68k-opc.c: Use #W rather than #w.
4091 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4093 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4095 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4096 and likewise for all the dbxx opcodes.
4098 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4100 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4102 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4104 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4105 the VR4100 specific instructions to the mips_opcodes structure.
4107 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4109 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4110 ugly Metrowerks bug in CW6, is fixed in CW7.
4112 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4114 * ppc-opc.c (whole file): Add flags for common/any support.
4116 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4118 * Makefile.in (BISON): Remove macro.
4119 (FLAGS_TO_PASS): Remove BISON.
4121 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4123 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4125 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4126 instructions that take no args by looking at the match mask.
4127 (print_insn_arg): Always print "%" before register names.
4128 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4129 [case '_']: Don't print "@#" before address.
4130 [case 'J']: Use "%s" as format string, not register name.
4131 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4133 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4135 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4138 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4140 From David Mosberger-Tang <davidm@azstarnet.com>
4142 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4143 (alpha_insn_set): added definitions for VAX floating point
4144 instructions (Unix compilers don't generate these, but handcoded
4145 assembly might still use them).
4147 * alpha-dis.c (print_insn_alpha): added support for disassembling
4148 the miscellaneous instructions in the Alpha instruction set.
4150 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4152 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4153 no longer create sysdep.h, sed ppc-opc.c to work around a
4154 serious Metrowerks C bug.
4155 * mpw-make.in: Remove.
4156 * mpw-make.sed: New file, used by mpw-configure to edit
4157 Makefile.in into an MPW makefile.
4159 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4161 * Makefile.in (maintainer-clean): New synonym for realclean.
4163 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4165 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4166 which use '0', '1', and '2' instead. Specify the proper size for
4167 a pmove immediate operand. Correct the pmovefd patterns to be
4168 moves to a register, not from a register.
4169 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4171 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4173 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4174 %psr, %wim, %tbr as F_NOTV9.
4176 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4178 * Makefile.in (Makefile): Just rebuild Makefile when running
4180 (config.h, stamp-h): New targets.
4181 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4182 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4183 rebuilding config.h.
4184 * configure: Rebuild.
4186 * mips-opc.c: Change unaligned loads and stores with "t,A"
4187 operands to use "t,A(b)".
4189 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4191 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4193 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4195 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4196 until 3 instead of until 2.
4198 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4200 * Makefile.in (ALL_CFLAGS): Define.
4201 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4202 (MOSTLYCLEAN): Add config.log.
4203 (distclean): Don't remove config.log.
4204 * configure.in: Substitute HDEFINES.
4205 * configure: Rebuild.
4207 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4209 * sh-opc.h (sh_arg_type): Add F_FR0.
4210 (sh_table, case fmac): Add F_FR0 as first argument.
4212 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4214 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4216 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4218 * sparc-dis.c: Remove all references to NO_V9.
4220 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4222 * aclocal.m4: Just include ../bfd/aclocal.m4.
4223 * configure: Rebuild.
4225 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4227 * sparc-dis.c (X_DISP19): Define.
4228 (print_insn, case 'G'): Use it.
4229 (print_insn, case 'L'): Sign extend displacement.
4231 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4233 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4234 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4235 host_makefile_frag or frags.
4236 * aclocal.m4: New file.
4237 * configure: Rebuild.
4238 * Makefile.in (INSTALL): Set to @INSTALL@.
4239 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4240 (INSTALL_DATA): Set to @INSTALL_DATA@.
4242 (AR_FLAGS): Set to rc rather than qc.
4243 (CC): Define as @CC@.
4244 (CFLAGS): Set to @CFLAGS@.
4245 (@host_makefile_frag@): Remove.
4246 (config.status): Remove dependency upon @frags@.
4248 * configure.in: ../bfd/config.bfd now just sets shell variables.
4249 Use them rather than looking through target Makefile fragments.
4250 * configure: Rebuild.
4252 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4254 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4256 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4258 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4259 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4262 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4263 (lookup_{name,value}): New functions.
4264 (prefetch_table): New static local.
4265 (sparc_{encode,decode}_prefetch): New functions.
4266 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4268 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4270 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4273 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4275 * sh-dis.c: Correct comment on first line of file.
4277 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4279 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4281 * sparc-opc.c (asi, membar): New static locals.
4282 (sparc_{encode,decode}_{asi,membar}): New functions.
4283 (sparc_opcodes, membar insn): Fix.
4284 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4285 Support decoding of membar masks.
4288 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4290 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4292 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4294 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4295 and likewise for the other branches. Add bhs as an alias for bcc,
4296 and likewise for the size variants. Add dbhs as an alias for
4299 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4301 * sh-opc.h (FP sts instructions): Update to match reality.
4303 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4305 * m68k-dis.c: (fpcr_names): Add % before all register names.
4306 (reg_names): Likewise.
4307 (print_insn_arg): Don't explicitly print % before register names.
4308 Add % before register names in static array names. In case 'r',
4309 print data registers as `@(Dn)', not `Dn@'. When printing a
4310 memory address, don't print @# before it.
4311 (print_indexed): Change base_disp and outer_disp from int to
4312 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4313 syntax. Sign extend 8 byte displacement correctly.
4314 (print_base): Print using MIT syntax. Print zpc when appropriate.
4315 Change parameter disp from int to bfd_vma.
4317 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4320 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4322 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4323 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4324 * sh-opc.h (sh_arg_type): Add new operand types.
4325 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4327 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4329 * Makefile.in (distclean): Remove generated file config.h.
4331 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4333 * Makefile.in (distclean): Remove generated file config.h.
4335 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4337 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4339 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4341 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4342 rather than numopcodes. Use m68k_opcodes rather than removed
4343 opcode function. Don't check F_ALIAS.
4344 (print_insn_arg): Change first parameter to be const char *.
4345 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4346 (m68k-opc.o): New target.
4347 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4348 * configure: Rebuild.
4350 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4352 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4353 (opcode_bits, opcode_hash_table): New variables.
4354 (opcodes_initialized): Renamed from opcodes_sorted.
4355 (build_hash_table): New function.
4356 (is_delayed_branch): Use hash table.
4357 (print_insn): Renamed from print_insn_sparc, made static.
4358 Build and use hash table. If !sparc64, ignore sparc64 insns,
4359 and vice-versa if sparc64.
4360 (print_insn_sparc, print_insn_sparc64): New functions.
4361 (compare_opcodes): Move sparc64 opcodes to end.
4362 Print commutative insns with constant second.
4363 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4365 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4367 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4368 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4369 avoids printing a delay slot in a delay slot.
4370 * sh-opc.h (sh_table): Fully bracket last entry.
4372 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4374 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4376 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4378 * configure.in: Get host_makefile_frag from ${srcdir}.
4380 * configure.in: Autoconfiscated. Check for string[s].h. Create
4381 config.h from config.in. Don't set up sysdep.h link.
4382 * sysdep.h: New file.
4383 * configure, config.in: New files, generated from configure.in.
4384 * Makefile.in: Updated to be processed autoconf-style.
4385 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4386 (Makefile): Depend on config.status.
4387 (config.status): New rule.
4388 * configure.bat: Update Makefile substitutions.
4390 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4392 * mips-opc.c (L1): Define.
4393 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4394 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4397 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4399 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4400 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4401 have multiple add units but only a single logical unit.
4403 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4404 shifted by 18, without any insertion or extraction function.
4405 (insert_cr, extract_cr): Remove.
4407 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4409 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4412 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4414 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4415 * sh-opc.h: Add copyright.
4417 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4419 * Makefile.in (crunch-m68k): Delete extra target accidentally
4420 checked in a while ago.
4422 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4424 * sh-opc.h (sh_table): Add SH3 support.
4426 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4428 * sh-opc.h: Added bsrf and braf.
4430 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4432 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4433 bogus [ls]fm{ea,fd} patterns.
4435 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4436 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4437 initialize it from memory. Make function static.
4438 (print_insn_{big,little}_arm): New functions.
4439 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4440 the correct endianness.
4442 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4444 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4447 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4449 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4450 17th, so that it builds again using GCC as the compiler.
4452 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4454 * mips-dis.c (print_insn_little_mips): Cast return value from
4455 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4456 expects an unsigned long, and that might be fewer words of
4457 argument storage (e.g., if bfd_vma is long long on a 32-bit
4459 (print_insn_big_mips): Likewise with bfd_getb32 value.
4460 (_print_insn_mips): Now static.
4462 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4464 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4465 gcc memory hog problem with initializer is fixed.
4467 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4469 Merge in support for Mac MPW as a host.
4470 (Old change descriptions retained for informational value.)
4472 * mpw-config.in (archname): Compute from the config.
4473 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4475 * mpw-config.in (target_arch): Compute from canonical target.
4476 (m68k, mips, powerpc, sparc): Add architectures.
4477 * mpw-make.in (disassemble.c.o): Add.
4478 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4480 * mpw-config.in (BFD_MACHINES): Set to a default value.
4481 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4483 * mpw-make.in (CSEARCH): Add extra-include to search path.
4485 * mpw-config.in (varargs.h): Don't create.
4486 (sysdep.h): Create using forward-include.
4487 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4489 * mpw-config.in: New file, MPW version of configure.in.
4490 * mpw-make.in: New file, MPW version of Makefile.in.
4492 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4494 * alpha-dis.c (print_insn_alpha): Put empty statement after
4497 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4499 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4500 (low_sign_extend): Likewise.
4501 (get_field): Delete unused function.
4502 (set_field, deposit_14, deposit_21): Likewise.
4504 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4506 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4509 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4511 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4513 * alpha-opc.h (OSF_ASMCODE): define
4514 print pal-code names as defined in App C of the
4515 Alpha Architecture Reference Manual
4517 * alpha-dis.c: cleaned up output
4518 print stylized code forms as defined in App A.4.3 of the
4519 Alpha Architecture Reference Manual
4521 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4523 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4525 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4528 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4530 * m68k-dis.c (opcode): New function. Returns address of opcode
4531 table entry given index, even if the opcode table was split to
4532 work around gcc bugs.
4533 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4535 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4536 (reg_names): Now const.
4537 (print_insn_arg): Arrays cacheFieldName and names now const.
4538 (print_indexed): Array scales now const.
4540 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4542 * ppc-opc.c: Sort recently added instructions by minor opcode
4543 number within major opcode number.
4545 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4547 * hppa-dis.c: Include libhppa.h.
4549 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4551 * mips-opc.c: Change dli to use M_DLI, and add dla.
4553 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4555 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4557 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4559 * mips-opc.c: Add r4650 mul instruction.
4561 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4563 * mips-opc.c: Add uld and usd macros for unaligned double load and
4566 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4568 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4569 mfdcr, mtdcr, icbt, iccci.
4571 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4573 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4574 signed char fields to shorts, more portable.
4576 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4578 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4579 char fields as signed chars, since they may have negative values.
4581 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4583 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4584 (mycroft@netbsd.org).
4586 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4588 From "Logg, Ed" <elogg@ea.com>:
4589 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4590 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4593 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4595 * ppc-opc.c: Changes based on patch from David Edelsohn
4596 <edelsohn@mhpcc.edu>.
4597 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4600 (insert_tbr): New static function.
4601 (extract_tbr): New static function.
4602 (XFXFXM_MASK, XFXM): Define.
4603 (XSPRBAT_MASK, XSPRG_MASK): Define.
4604 (powerpc_opcodes): Add instructions to access special registers by
4605 name. Add mtcr and mftbu.
4607 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4609 * mips-opc.c (P3): Define.
4610 (mips_opcodes): Add mad and madu.
4612 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4614 * configure.in: Add W65 support.
4615 * disassemble.c: Likewise.
4616 * w65-opc.h, w65-dis.c: New files.
4618 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4620 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4623 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4625 * mips-opc.c: Add dli as a synonym for li.
4627 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4629 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4630 print something for reserved opcode values, even if it won't
4633 * mips-dis.c (_print_insn_mips): When initializing, shift right
4634 and mask, to avoid sign extension problems on the Alpha.
4636 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4639 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4641 * sh-opc.h (mov.l gbr): Get direction right.
4642 * sh-dis.c (print_insn_shx): New function.
4643 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4644 print opcodes with right byte order.
4646 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4648 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4649 to avoid conflicts with getopt.
4651 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4653 * hppa-dis.c (print_insn_hppa): Read the instruction using
4654 bfd_getb32, so that it works on a little endian or 64 bit host.
4655 Remove unused local variable op.
4657 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4659 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4660 addu does not work correctly if -mips3.
4662 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4664 * a29k-dis.c (print_special): Add special register names defined
4665 on 29030, 29040 and 29050.
4666 (print_insn): Handle new operand type 'I'.
4668 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4670 * Makefile.in (INSTALL): Use top level install.sh script.
4672 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4674 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4675 that it works on a little endian host.
4677 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4679 * configure.in: Use ${config_shell} when running config.bfd.
4681 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4683 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4685 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4687 * a29k-dis.c (print_insn): Print the opcode.
4689 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4691 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4693 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4695 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4697 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4699 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4700 which store a value into memory.
4702 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4704 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4705 * arm-dis.c, arm-opc.h: New files.
4707 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4709 * Makefile.in (ns32k-dis.o): Add dependency.
4710 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4711 string, not as array of chars.
4713 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4715 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4717 * sparc-opc.c: Added sparclite extended FP operations, and
4718 versions of v9 impdep* instructions permitting specification of
4721 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4723 * i960-dis.c (reg_names): Now const.
4724 (struct sparse_tabent): New type, copied from array type in mem
4726 (ctrl): Local static array ctrl_tab now const.
4727 (cobr): Local static array cobr_tab now const.
4728 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4729 static variable mem_tab no longer explicitly initialized. Changed
4730 mem_init to const array of struct sparse_tabent.
4731 (reg): Local static variable reg_tab no longer explicitly
4732 initialized. Changed reg_init to const array of struct
4734 (ea): Local static array scale_tab now const.
4736 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4739 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4741 * configure.bat: the disassember needs to be enabled for
4742 "objdump -d" to work in djgpp.
4744 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4746 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4747 (invalid_float): Enabled general version, doesn't require running
4748 on ns32k host. Changed to take char* argument, and test for
4749 explicitly specified sizes, instead of using sizeof() on host CPU
4751 (INVALID_FLOAT): Cast first argument.
4752 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4753 list_P032, list_M032): Now const.
4754 (optlist, list_search): Made appropriate arguments now point to
4756 (print_insn_arg): Changed static array of one-character-string
4757 pointers into a static const array of characters; fixed sprintf
4758 statement accordingly.
4760 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4762 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4763 from distribution. A ns32k-dis.c from a previous distribution has
4764 been brought up to date and supports the new interface.
4766 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4768 * configure.in: add bfd_ns32k_arch target support.
4770 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4771 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4773 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4775 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4778 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4780 * h8300-dis.c, mips-dis.c: Don't use true and false.
4782 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4784 * configure.in: Change --with-targets to --enable-targets.
4786 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4788 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4789 opcodes to the first instruction with that opcode, to speed
4790 disassembly of large files. From ralphc@pyramid.com (Ralph
4793 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4795 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4797 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4799 * configure.bat: update to latest makefile.in
4801 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4803 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4804 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4805 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4806 slot insn is in a delay slot.
4807 * z8k-opc.h: (resflg): Fix patterns.
4808 * h8500-opc.h Fix CR insn patterns.
4810 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4812 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4813 "cmpl" before POWER versions, so that gas -many uses them.
4815 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4817 * disassemble.c: New file.
4818 * Makefile.in (OFILES): Add disassemble.o.
4819 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4820 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4821 binutils/configure.in.
4823 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4824 opcode being examined.
4826 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4828 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4829 (insert_ral, insert_ram, insert_ras): New functions.
4830 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4831 RAS for store with update.
4833 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4835 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4836 (edelsohn@npac.syr.edu).
4838 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4840 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4843 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4845 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4847 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4849 * ppc-opc.c (powerpc_operands): The signedp field has been
4850 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4851 instead. Add new operand SISIGNOPT.
4852 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4853 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4854 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4857 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4859 * i386-dis.c (struct private): Renamed to dis_private. `private'
4860 is a reserved word for dynix cc.
4862 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4864 * configure.in: Change error message to refer to bfd/config.bfd
4865 rather than bfd/configure.in.
4867 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4869 * ppc-opc.c: Define POWER2 as short alias flag.
4870 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4873 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4875 * i960-dis.c (print_insn_i960): Don't read a second word for
4876 opcodes 0, 1, 2 and 3.
4878 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4880 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4882 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4884 * m68881-ext.c: Removed; no longer used.
4885 * Makefile.in: Changed accordingly.
4887 * m68k-dis.c (ext_format_68881): Don't declare.
4888 (print_insn_m68k): If an instruction uses place 'i', it uses at
4889 least four fixed bytes.
4890 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4891 extended float, convert to double using floatformat_to_double, not
4892 ieee_extended_to_double, and fetch the data before converting it.
4894 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4897 davidj@ICSI.Berkeley.EDU (David Johnson).
4899 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4901 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4902 PowerPC uses bdnz[l][a].
4904 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4906 * dis-buf.c, i386-dis.c: Include sysdep.h.
4908 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4910 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4912 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4913 by Motorola PowerPC 601 with PPC_OPCODE_601.
4914 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4915 Disassemble Motorola PowerPC 601 instructions as well as normal
4916 PowerPC instructions.
4918 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4920 * i960-dis.c (reg, mem): Just use a static array instead of
4923 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4925 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4926 condition name index if this is for a negated condition.
4928 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4929 Floating point format for 'H' operand is backwards from normal
4930 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4931 operands (fmpyadd and fmpysub), handle bizarre register
4932 translation correctly for single precision format.
4934 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4935 or 'I' operands if the next format specifier is 'M' (fcmp
4936 condition completer).
4938 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4940 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4941 single number giving a bitmask for the MB and ME fields of an M
4942 form instruction. Change NB to accept 32, and turn it into 0;
4943 also turn 0 into 32 when disassembling. Seperated SH from NB.
4944 (insert_mbe, extract_mbe): New functions.
4945 (insert_nb, extract_nb): New functions.
4946 (SC_MASK): Mask out SA and LK bits.
4947 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4948 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4949 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4950 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4951 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4952 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4953 (powerpc_macros): Define table of macro definitions.
4954 (powerpc_num_macros): Define.
4956 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4957 if PPC_OPERAND_NEXT is set.
4959 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4961 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4962 char. Retrieve contents using bfd_getl32 instead of shifting.
4964 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4966 * ppc-opc.c: New file. Opcode table for PowerPC, including
4967 opcodes for POWER (RS/6000).
4968 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4969 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4970 (CFILES): Add ppc-dis.c.
4971 (ppc-dis.o, ppc-opc.o): New targets.
4972 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4974 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4976 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4977 No space before 'u', 'f', or 'N'.
4979 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4981 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4982 farther than we should.
4984 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4986 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4988 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4990 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4992 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4993 needs it, to prevent reading past the end of a section.
4995 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4997 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4998 Removed t,A case for la; always use t,A(b) case.
5000 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5002 From Ted Lemen <mellon@pepper.ncd.com>
5003 * mips-dis.c (print_insn_arg): Handle 'k'.
5004 * mips-opc.c: Make cache use k, not t.
5006 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5008 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5009 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5010 FLOAT_FORMAT_CODE to put out floating point register names.
5012 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5014 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5016 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5018 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5020 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5022 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5023 larger than 32. Moved dsxx32 variants first for disassembler.
5025 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5027 * z8kgen.c, z8k-opc.h: Add full lda information.
5029 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5031 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5032 movb instructions. Any necessary space will be emitted by
5033 the code to handle nullification completers.
5035 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5037 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5039 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5041 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5042 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5044 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5046 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5048 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5050 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5051 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5053 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5055 * m88k-dis.c (m88kdis): comment change. Remove space after
5057 (printop): handle new arg types DEC and XREG for m88110.
5059 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5061 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5062 type for absolute branch addresses. Delete special
5063 "ble" and "be" code in 'W' operand code.
5065 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5067 * mips-opc.c: Set hazard information correctly for branch
5068 likely instructions.
5070 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5072 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5073 info->fprintf_func for printing and info->print_address_func for
5076 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5078 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5080 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5082 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5083 Corrected second case of "b" for disassembler.
5085 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5087 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5088 to BFD swapping routines to correspond to BFD name changes.
5090 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5092 * mips-opc.c: Change div machine instruction to be z,s,t rather
5093 than s,t. Change div macro to be d,v,t rather than d,s,t.
5094 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5095 rem and remu which generates only the corresponding div
5096 instruction. This is for compatibility with the MIPS assembler,
5097 which only generates the simple machine instruction when an
5098 explicit destination of $0 is used.
5099 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5101 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5103 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5104 WR_31 hazard for bal, bgezal, bltzal.
5106 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5108 * hppa-dis.c (print_insn_hppa): Use print function
5109 from within the disassemble_info, not fprintf_filtered.
5111 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5113 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5114 Law, law@cs.utah.edu.)
5116 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5118 * mips-opc.c ("absu"): Removed.
5121 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5123 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5124 Changed hazard information to distinguish between memory load
5125 delays and coprocessor load delays.
5127 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5129 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5131 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5133 * configure.in: Don't pass cpu to config.bfd.
5135 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5137 * m88k-dis.c (m88kdis): Make class unsigned.
5139 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5141 * alpha-dis.c (print_insn_alpha): One branch format case was
5142 missing the instruction name.
5144 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5146 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5147 Add the arch-specific auxiliary files.
5148 (OFILES): Remove the arch-specific auxiliary files
5149 and use BFD_MACHINES instead of DIS_LIBS.
5150 * configure.in: Set BFD_MACHINES based on --with-targets option.
5152 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5154 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5157 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5159 * sparc-opc.c: Change CONST to const to deal with gcc
5160 -Dconst=__const -traditional.
5162 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5164 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5165 coprocessor instructions out of #if 0, and made them use new
5168 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5170 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5172 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5174 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5175 instruction, for use by the disassembler.
5177 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5178 hand-coded sign extensions that depended on 32-bit host ints.
5179 FIXME, we still depend on big-endian host bitfield ordering.
5180 (sparc_print_insn): Set the insn_info_valid field, and the
5181 other fields that describe the instruction being printed.
5183 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5185 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5186 `jmp' instead of just one of them.
5188 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5190 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5191 (fput_fp_reg_r): Renamed from fput_reg_r.
5192 (fput_fp_reg): New function.
5193 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5195 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5197 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5199 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5201 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5203 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5204 don't output a space.
5206 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5208 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5210 * mips-opc.c: New file, containing opcode table from
5211 ../include/opcode/mips.h.
5212 * Makefile.in: Add it.
5214 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5216 * m88k-dis.c: New file, moved in from gdb and changed to use the
5217 new dis-asm.h disassembler interface.
5218 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5219 (m88k-dis.o): New target.
5221 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5223 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5224 argument string const char * to correspond to opcode/mips.h.
5226 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5228 * mips-dis.c: Updated to account for name changes in new version
5230 * Makefile.in: Added header file dependencies.
5232 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5234 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5236 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5238 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5239 extend, rather than shifts.
5241 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5243 * Makefile.in: Undo 15 June change.
5245 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5247 * m68k-dis.c (print_insn_arg): Change return value to byte count
5249 * m68k-dis.c: Re-write to detect invalid operands before
5250 printing anything, so we can handle this the same way we
5251 handle invalid opcodes.
5253 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5255 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5257 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5259 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5262 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5264 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5266 * configure.in: Do make sysdep.h link.
5267 * Makefile.in: Search ../include. Don't search ../bfd.
5269 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5271 Changes from Jeff Law, law@cs.utah.edu:
5272 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5273 Do not print a space before the completers specified by
5276 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5278 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5279 defined, since gdb has been fixed.
5281 Changes from Jeff Law, law@cs.utah.edu:
5282 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5283 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5284 be a *disassemble_info, not a *FILE.
5285 * hppa-dis.c: Support 'd', '!', and 'a'.
5286 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5287 * hppa-dis.c: Delete cases which are no longer needed.
5289 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5291 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5293 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5295 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5298 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5300 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5301 * configure.in: No longer need to configure to get sysdep.h.
5303 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5305 * Patches from Jeffrey Law <law@cs.utah.edu>.
5306 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5307 templates for 1.1 FP computational instructions.
5309 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5311 * h8500-dis.c (print_insn_h8500): Address argument is type
5313 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5316 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5317 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5319 * sparc-dis.c (compare_opcodes): Move static declaration to
5322 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5324 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5325 instruction, remove unimp hack from 'l' argument.
5327 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5329 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5332 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5334 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5335 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5338 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5340 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5341 arrays of string pointers to 2-d arrays of chars, to save
5344 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5346 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5347 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5349 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5351 * hppa-dis.c: New file from Utah, adapted to new disassembler
5353 * Makefile.in: Include it.
5355 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5357 * sh-dis.c, sh-opc.h: New files.
5359 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5361 * alpha-dis.c, alpha-opc.h: New files.
5363 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5365 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5368 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5370 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5372 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5374 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5377 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5379 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5380 and double percent signs a few places.
5382 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5384 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5385 Use info->print_address_func not print_address.
5387 * dis-buf.c (generic_print_address): New function.
5389 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5391 * Makefile.in: Add sparc-dis.c.
5392 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5394 Add `add' instruction to the set that get checked
5395 for a preceding `sethi' in order to print an absolute address.
5396 * (print_insn): Disassembly prefers real instructions.
5397 (is_delayed_branch): Speed up.
5398 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5399 Still missing some float ops, and needs testing.
5400 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5401 F_ALIAS. Use printf, not fprintf, when not passing a file
5403 (compare_opcodes): Check that identical instructions have
5404 identical opcodes, complain otherwise.
5407 * Include reg_names.
5409 Use dis-asm.h/read_memory_func interface.
5411 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5413 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5414 deliberately return non-zero to setjmp from longjmp. Otherwise
5415 this code fails to compile.
5417 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5419 * m68k-dis.c: Fix prototype for fetch_arg().
5421 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5423 * dis-buf.c: New file, for new read_memory_func interface.
5424 Makefile.in (OFILES): Include it.
5425 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5426 Use new read_memory_func interface.
5428 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5430 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5431 * h8500-opc.h: Fix couple of opcodes.
5433 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5435 * Makefile.in: add dvi & installcheck targets
5437 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5439 * Makefile.in: Update for h8500-dis.c.
5441 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5443 * h8500-dis.c, h8500-opc.h: New files
5445 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5447 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5448 ../include/dis-asm.h.
5449 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5450 and ../gdb/m68k-pinsn.c).
5451 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5452 and ../gdb/i386-pinsn.c).
5453 * m68881-ext.c: New file. Moved definition of
5454 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5455 * Makefile.in: Adjust for new files.
5456 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5457 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5458 can be dis-assembled.
5460 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5462 * mips-dis.c (print_insn_arg): Now returns void.
5464 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5466 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5467 files that use the macros.
5469 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5471 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5472 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5473 (CFILES): Added mips-dis.c.
5475 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5477 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5478 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5480 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5482 * Makefile.in: Improve *clean rules.
5483 * configure.in: Allow a default host.
5485 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5487 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5488 files include other sysdep files
5490 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5492 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5494 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5496 * configure.in: For host support, use ../bfd/configure.host
5497 so it stays in sync with the ../bfd/hosts database.
5499 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5501 * configure.in: use cpu-vendor-os triple instead of nested cases
5503 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5505 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5506 *always* the wrong one.
5508 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5510 * z8kgen.c: added copyright info
5512 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5514 * z8k-dis.c (unparse_instr): prettier tabs
5515 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5517 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5519 * configure.in: Add ncr* configuration.
5520 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5521 picayune ANSI compilers happy.
5523 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5525 * configure.in (i386): Make i386 and i486 synonymous for now.
5526 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5528 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5530 * Makefile.in (install): Fix typo.
5532 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5534 * Makefile.in (make): Remove obsolete crud.
5535 (sparc-opc.o): Avoid Sun Make VPATH bug.
5537 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5539 * Makefile.in: since there are no SUBDIRS, remove rule and
5540 references of subdir_do.
5542 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5544 * Makefile.in (install): Get the library name right here too.
5545 Don't install bfd.h, since it's unrelated to this library. No
5546 subdirs to recurse into, either.
5547 (CFILES): The source file has a .c suffix, not .o.
5549 * sparc-opc.c: New file, moved from BFD.
5550 * Makefile.in (OFILES): Build it.
5552 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5554 * z8k-dis.c: fixed forward refferences of some declarations.
5556 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5558 * Makefile.in: get the name of the library right
5560 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5562 * z8k-dis.c: knows how to disassemble z8k stuff
5563 * z8k-opc.h: new file full of z8000 opcodes
5567 version-control: never