1 2001-05-23 Alan Modra <amodra@one.net.au>
3 * arc-opc.c: Whitespace changes.
5 2001-05-18 Hans-Peter Nilsson <hp@axis.com>
7 * cris-opc.c (cris_spec_regs): Add missing initializer field for
10 2001-05-15 Frank Ch. Eigler <fche@redhat.com>
12 * cgen-dis.in (extract_normal): Complete support for min<base case.
14 2001-05-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
16 * mips-dis.c (INSNLEN): Rename MAXLEN.
17 (std_reg_names): Replace by mips32_reg_names and mips64_reg_names.
18 (print_insn_arg): Remove $ prefix of register names.
19 (set_mips_isa_type): Remove.
20 (mips_isa_type): New function.
21 (get_mips_isa): New Function.
22 (print_insn_mips): Rename _print_insn_mips.
23 (_print_insn_mips): New function, contains code which was
24 duplicated in print_insn_big_mips and print_insn_little_mips.
25 (print_insn_big_mips): Moved code to _print_insn_mips.
26 (print_insn_little_mips): Likewise.
27 (print_mips16_insn_arg): Remove $ prefix of register names.
28 Print error message before abort.
30 2001-05-14 J.T. Conklin <jtc@redback.com>
32 * ppc-opc.c (powerpc_opcodes): Fixed extended opcode field of
33 simplified mnemonics used for setting PPC750-specific special
36 2001-05-12 H.J. Lu <hjl@gnu.org>
38 * i386-dis.c (print_insn_i386): Always set `mod', `reg' and
41 2001-05-12 Peter Targett <peter.targett@arccores.com>
43 * arc-opc.c (arc_reg_names): Correct attribute for lp_count
44 register to r/w. Formatting fixes throughout file.
46 2001-05-12 Alan Modra <amodra@one.net.au>
48 * i386-dis.c (prefix_user_table): Correct movq2dq, movdq2q, and
50 (twobyte_has_modrm): Update table.
51 (need_modrm): Give it file scope.
52 (MODRM_CHECK): Define.
53 (dofloat): Use MODRM_CHECK.
58 2001-05-07 Frank Ch. Eigler <fche@redhat.com>
60 * cgen-dis.in (default_print_insn): Tolerate min<base instructions
61 even at end of a section.
62 * cgen-ibld.in (extract_normal): Tolerate min!=base!=max instructions
63 by ignoring precariously-unpacked insn_value in favor of raw buffer.
65 2001-05-03 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
67 * disassemble.c (disassembler_usage): Remove unused attribute.
69 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
71 * m32r-dis.c, -asm.c, -ibld.c: Regenerated with disassembler fixes.
73 2001-05-04 Frank Ch. Eigler <fche@redhat.com>
75 * cgen-dis.in (print_insn): Remove call to read_insn. Instead,
76 assume incoming buffer already has the base insn loaded. Handle
77 smaller-than-base instructions for variable-length case.
79 2001-05-04 Alan Modra <amodra@one.net.au>
81 * i386-dis.c (Ev, Ed): Remove duplicate define.
84 (OP_XS): New function.
85 (dis386_twobyte_att): Correct pinsrw, pextrw, pmovmskb, and
87 (dis386_twobyte_intel): Likewise.
88 (prefix_user_table): Use MS for maskmovq operand.
90 2001-04-27 Johan Rydberg <jrydberg@opencores.org>
92 * Makefile.am: Add OpenRISC target.
93 * Makefile.in: Regenerated.
95 * disassemble.c (disassembler): Recognize the OpenRISC disassembly.
97 * configure.in (bfd_openrisc_arch): Add target.
98 * configure: Regenerated.
100 * openrisc-asm.c: New file.
101 * openrisc-desc.c: Likewise.
102 * openrisc-desc.h: Likewise.
103 * openrisc-dis.c: Likewise.
104 * openrisc-ibld.c: Likewise.
105 * openrisc-opc.c: Likewise.
106 * openrisc-opc.h: Likewise.
108 2001-04-24 Christian Groessler <cpg@aladdin.de>
110 * z8k-dis.c: add names of control registers (ctrl_names);
111 (seg_length): provides instruction length fixup for segmented
112 mode; (unpack_instr): correctly handle ARG_DISP16, ARG_DISP12,
113 CLASS_0DISP7, CLASS_1DISP7, CLASS_DISP8 and CLASS_PR cases;
114 (unparse_intr): handle CLASS_PR, print addresses without '#'
115 * z8k-opc.h: re-created with new z8kgen
116 * z8kgen.c: merged in fixes which were in existing z8k-opc.h; new
117 entries for ldctl/ldctlb instruction
119 2001-04-06 Andreas Jaeger <aj@suse.de>
121 * i386-dis.c: Add ffreep instruction.
123 2001-03-30 Alexandre Oliva <aoliva@redhat.com>
125 * ppc-opc.c (insert_mbe): Shift mask initializer as long.
127 2001-03-24 Alan Modra <alan@linuxcare.com.au>
129 * i386-dis.c (PREGRP25): Define.
130 (dis386_twobyte_att): Use here in place of "movntq" entry.
131 (dis386_twobyte_intel): Likewise.
132 (prefix_user_table): Add PREGRP25 entry for "movntq" and "movntdq".
134 (dis386_twobyte_att): Use here.
135 (dis386_twobyte_intel): Likewise.
136 (prefix_user_table): Add PREGRP26 entry for "punpcklqdq".
137 (prefix_user_table <maskmovdqu>): XM operand, not MX.
138 (prefix_user_table): Cosmetic changes to "bad" entries.
140 2001-03-23 Nick Clifton <nickc@redhat.com>
142 * mips-opc.c: Remove extraneous whitespace.
143 * mips-dis.c: Remove extraneous whitespace.
145 2001-03-22 Ben Elliston <bje@redhat.com>
147 * cgen-asm.in (@arch@_cgen_assemble_insn): Move tmp_errmsg
148 declaration inside CGEN_VERBOSE_ASSEMBLER_ERRORS conditional.
149 * cgen-ibld.in (put_insn_int_value): Mark cd parameter as unused
150 to allay a compiler warning.
152 2001-03-22 Alan Modra <alan@linuxcare.com.au>
154 * i386-dis.c (dis386_twobyte_att): Add entries for paddq, psubq.
155 (dis386_twobyte_intel): Likewise.
156 (twobyte_has_modrm): Set entry for paddq, psubq.
158 2001-03-20 Patrick Macdonald <patrickm@redhat.com>
160 * cgen-dis.in (print_insn_@arch@): Add support for target machine
161 determination via CGEN_COMPUTE_MACH.
162 * fr30-desc.c: Regenerate.
163 * fr30-dis.c: Regenerate.
164 * fr30-opc.h: Regenerate.
165 * m32r-desc.c: Regenerate.
166 * m32r-dis.c: Regenerate.
167 * m32r-opc.h: Regenerate.
168 * m32r-opinst.c: Regenerate.
170 2001-03-20 H.J. Lu <hjl@gnu.org>
172 * configure.in: Remove the redundent AC_ARG_PROGRAM.
173 * configure: Rebuild.
175 2001-03-19 Jim Wilson <wilson@redhat.com>
177 * ia64-gen.c (fetch_insn_class): If xsect, then ignore comment and
178 notestr if larger than xsect.
179 (in_class): Handle format M5.
180 * ia64-asmtab.c: Regnerate.
182 2001-03-19 John David Anglin <dave@hiauly1.hia.nrc.ca>
184 * vax-dis.c (print_insn_vax): Only fetch two bytes if the info buffer
185 has more than one byte left to read.
187 2001-03-16 Martin Schwidefsky <schwidefsky@de.ibm.com>
189 * s390-opc.c: Add new opcodes. Smooth out formatting.
190 * s390-opc.txt: Add new opcodes.
192 2001-03-06 Nick Clifton <nickc@redhat.com>
194 * arm-dis.c (print_insn_thumb): Compute destination address
195 of BLX(1) instruction by taking bit 1 from PC and not from bit
198 2001-03-06 Igor Shevlyakov <igor@windriver.com>
200 * m68k-dis.c (print_insn_m68k): Recognize Coldfire CPUs
201 so command line switches will work.
203 2001-03-05 Dave Brolley <brolley@redhat.com>
205 * fr30-asm.c: Regenerate.
206 * fr30-desc.c: Regenerate.
207 * fr30-desc.h: Regenerate.
208 * fr30-dis.c: Regenerate.
209 * fr30-ibld.c: Regenerate.
210 * fr30-opc.c: Regenerate.
211 * fr30-opc.h: Regenerate.
212 * m32r-asm.c: Regenerate.
213 * m32r-desc.c: Regenerate.
214 * m32r-desc.h: Regenerate.
215 * m32r-dis.c: Regenerate.
216 * m32r-ibld.c: Regenerate.
217 * m32r-opc.c: Regenerate.
218 * m32r-opc.h: Regenerate.
219 * m32r-opinst.c: Regenerate.
221 2001-02-28 Igor Shevlyakov <igor@windriver.com>
223 * m68k-opc.c: fix cpushl according to Motorola. Enable
224 bunch of instructions for Coldfire 5407 and add all new.
226 2001-02-27 Alan Modra <alan@linuxcare.com.au>
228 * configure.in (BFD_VERSION): Do without grep.
229 * configure: Regenerate.
230 * Makefile.am: Run "make dep-am".
231 * Makefile.in: Regenerate.
233 2001-02-23 David Mosberger <davidm@hpl.hp.com>
235 * ia64-opc-a.c: Add missing pseudo-ops for "cmp" and "cmp4".
236 * ia64-asmtab.c: Regenerate.
238 2001-02-21 David Mosberger <davidm@hpl.hp.com>
240 * ia64-opc-d.c (ia64_opcodes_d): Break the "add" pattern into two
241 separate variants: one for IMM22 and the other for IMM14.
242 * ia64-asmtab.c: Regenerate.
244 2001-02-21 Greg McGary <greg@mcgary.org>
246 * cgen-opc.c (cgen_get_insn_value): Add missing `return'.
248 2001-02-20 H.J. Lu <hjl@gnu.org>
250 * Makefile.am (ia64-ic.tbl): Remove the target.
251 (ia64-raw.tbl): Likewise.
252 (ia64-waw.tbl): Likewise.
253 (ia64-war.tbl): Likewise.
254 (ia64-asmtab.c): Generate it in the source directory.
255 * Makefile.in: Regenerated.
257 2001-02-18 lars brinkhoff <lars@nocrew.org>
259 * Makefile.am: Add PDP-11 target.
260 * configure.in: Likewise.
261 * disassemble.c: Likewise.
262 * pdp11-dis.c: New file.
263 * pdp11-opc.c: New file.
265 2001-02-14 Jim Wilson <wilson@redhat.com>
267 * ia64-ic.tbl: Update from Intel. Add setf to fr-writers.
268 * ia64-asmtab.c: Regenerate.
270 Mon Feb 12 17:41:26 CET 2001 Jan Hubicka <jh@suse.cz>
272 * i386-dis.c (prefix_user_t): Add 'Y' to SSE ineger converison
276 2001-02-11 Maciej W. Rozycki <macro@ds2.pg.gda.pl>
278 * mips-dis.c (print_insn_arg): Use top four bits of the address of
279 the following instruction not of the jump itself for the jump
281 (print_mips16_insn_arg): Likewise.
283 2001-02-11 Michael Sokolov <msokolov@ivan.Harhan.ORG>
285 * Makefile.am (stamp-lib): ranlib the libopcodes.a in the build
287 * Makefile.in: Regenerate.
289 2001-02-09 Schwidefsky <schwidefsky@de.ibm.com>
291 * Makefile.am: Add linux target for S/390.
292 * Makefile.in: Likewise.
293 * configure.in: Likewise.
294 * disassemble.c: Likewise.
295 * s390-dis.c: New file.
296 * s390-mkopc.c: New file.
297 * s390-opc.c: New file.
298 * s390-opc.txt: New file.
300 2001-02-05 Jim Wilson <wilson@redhat.com>
302 * ia64-asmtab.c: Revert 2000-12-16 change.
304 2001-02-02 Patrick Macdonald <patrickm@redhat.com>
306 * fr30-desc.h: Regenerate with CGEN_MAX_SYNTAX_ELEMENTS.
307 * m32r-desc.h: Regenerate.
309 Thu Feb 1 16:29:06 MET 2001 Jan Hubicka <jh@suse.cz>
311 * i386-dis.c (dis386_att, grps): Use 'T' for push/pop
312 (putop): Handle 'T', alphabetize order, fix 'I' handling in Intel syntax
314 2001-01-14 Alan Modra <alan@linuxcare.com.au>
316 * hppa-dis.c (print_insn_hppa): Handle '>' and '<' arg types.
318 2001-01-13 Nick Clifton <nickc@redhat.com>
320 * disassemble.c: Remove spurious white space.
322 Sat Jan 13 01:48:24 MET 2001 Jan Hubicka <jh@suse.cz>
324 * i386-dis.c (dis386_att, disx86_64_att): Fix ret, lret and iret
327 2001-01-11 Peter Targett <peter.targett@arccores.com>
329 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
330 * Makefile.am (C_FILES): Add arc-ext.c.
331 (ALL_MACHINES) Add arc-ext.lo.
332 (INCLUDES) Add opcode directory to list.
333 New dependency entry for arc-ext.lo.
334 * disassemble.c (disassembler): Correct call to
335 arc_get_disassembler.
336 * arc-opc.c: New update for ARC, including full base
337 instructions for ARC variants.
338 * arc-dis.h, arc-dis.c: New update for ARC, including
339 extensibility functionality.
340 * arc-ext.h, arc-ext.c: New files for handling extensibility.
342 2001-01-10 Jan Hubicka <jh@suse.cz>
344 * i386-dis.c (PREGRP15 - PREGRP24): New.
345 (dis386_twobyt): Add SSE2 instructions.
346 (twobyte_uses_SSE_prefix: Rename from ... ; add new SSE instructions.
347 (twobyte_uses_f3_prefix): ... this one.
348 (grps): Add SSE instructions.
349 (prefix_user_table): Add two new slots; add SSE2 instructions.
350 (print_insn_i386): Rename uses_f3_prefix to uses_SSE_prefix;
351 Handle the REPNZ and Data16 prefixes as well; do proper lookup
352 to prefix_user_table.
353 (OP_E): Accept mfence and lfence as well.
354 (OP_MMX): Data16 prefix turns MMX to SSE; support REX extensions.
355 (OP_XMM): Support REX extensions.
359 2001-01-09 Nick Clifton <nickc@redhat.com>
361 * arm-dis.c (print_insn): Set pc to zero for instructions with
362 a reloc associated with them.
364 2001-01-09 Jeff Johnston <jjohnstn@redhat.com>
366 * cgen-asm.in (parse_insn_normal): Changed syn to be
367 CGEN_SYNTAX_CHAR_TYPE. Changed all references to *syn
368 as character to use CGEN_SYNTAX_CHAR macro and all comparisons
369 to '\0' to use 0 instead.
370 * cgen-dis.in (print_insn_normal): Ditto.
371 * cgen-ibld.in (insert_insn_normal, extract_insn_normal): Ditto.
373 2001-01-05 Jan Hubicka <jh@suse.cz>
375 * i386-dis.c: Add x86_64 support.
376 (rex): New static variable.
377 (REX_MODE64, REX_EXTX, REX_EXTY, REX_EXTZ): New constants.
378 (USED_REX): New macro.
379 (Ev, Ed, Rm, Iq, Iv64, Cm, Dm, Rm*, Ob64, Ov64): New macros.
380 (OP_I64, OP_OFF64, OP_IMREG): New functions.
381 (OP_REG, OP_OFF): Declare.
382 (get64, get32, get32s): New functions.
383 (r??_reg): New constants.
384 (dis386_att): Change templates of instruction implicitly promoted
385 to 64bit; change e?? to RMe?? for unwind RM byte instructions.
387 (dis386_intel): Likewise.
388 (dixx86_64_att): New table based on dis386_att.
389 (dixx86_64_intel): New table based on dis386_intel.
390 (names64, names8rex): New global variable.
391 (names32, names16): Add extended registers.
392 (prefix_user_t): Recognize rex prefixes.
393 (prefix_name): Print REX prefixes nicely.
394 (op_riprel): New global variable.
395 (start_pc): Set type to bfd_vma.
396 (print_insn_i386): Detect the 64bit mode and use proper table;
397 move ckprefix after initializing the buffer; output unused rex prefixes;
398 output information about target of RIP relative addresses.
399 (putop): Support 'O' and 'I'. Update handling of "P', 'Q', 'R' and 'S';
400 (print_operand_value): New function.
401 (OP_E, OP_G, OP_REG, OP_I, OP_J, OP_DIR, OP_OFF, OP_D): Add support for
402 REX prefix and new modes.
403 (get64, get32s): New.
404 (get32): Return bfd_signed_vma type.
405 (set_op): Initialize the op_riprel.
406 * disassemble.c (disassembler): Recognize the x86-64 disassembly.
408 2001-01-03 Richard Sandiford <r.sandiford@redhat.com>
410 cgen-dis.in (read_insn): Use bfd_get_bits()
412 2001-01-02 Richard Sandiford <rsandifo@redhat.com>
414 * cgen-dis.c (hash_insn_array): Use bfd_put_bits().
415 (hash_insn_list): Likewise
416 * cgen-ibld.in (insert_1): Use bfd_put_bits() and bfd_get_bits().
417 (extract_1): Use bfd_get_bits().
418 (extract_normal): Apply sign extension to both extraction
420 * cgen-opc.c (cgen_get_insn_value): Use bfd_get_bits()
421 (cgen_put_insn_value): Use bfd_put_bits()
423 2000-12-28 Frank Ch. Eigler <fche@redhat.com>
425 * cgen-asm.in (parse_insn_normal): Print better error message for
426 instructions with missing operands.
428 2000-12-21 Santeri Paavolainen <santtu@ssh.com>
430 * cgen-opc.c: Include alloca.h if HAVE_ALLOCA_H is defined.
432 2000-12-16 Nick Clifton <nickc@redhat.com>
434 * Makefile.in: Regenerate.
435 * aclocal.m4: Regenerate.
436 * config.in: Regenerate.
437 * configure.in: Add spacing.
438 * configure: Regenerate.
439 * ia64-asmtab.c: Regenerate.
440 * po/opcodes.pot: Regenerate.
442 2000-12-12 Frank Ch. Eigler <fche@redhat.com>
444 * cgen-asm.in (@arch@_cgen_assemble_insn): Prefer printing insert-time
445 error messages over later parse-time ones.
447 2000-12-12 Jim Wilson <wilson@redhat.com>
449 * ia64-dis.c (print_insn_ia64): Cast away const on ia64_free_opcode
451 * ia64-gen.c (insert_deplist): Cast sizeof result to int.
452 (print_dependency_table): Print NULL if semantics field not set.
453 (insert_opcode_dependencies): Mark cmp parameter as unused.
454 (print_main_table): Use fprintf_vma to print long long fields.
455 (main): Mark argv paramter as unused. Convert to old style definition.
456 * ia64-opc.c (ia64_find_dependency): Cast sizeof result to int.
457 * ia64-asmtab.c: Regnerate.
459 2000-12-09 Nick Clifton <nickc@redhat.com>
461 * m32r-dis.c (print_insn): Prevent re-read of instruction from
464 * fr30-dis.c: Regenerate.
466 2000-12-08 Peter Targett <peter.targett@arccores.com>
468 * configure.in: Add arc-ext.lo for bfd_arc_arch selection.
469 * Makefile.am (C_FILES): Add arc-ext.c.
470 (ALL_MACHINES) Add arc-ext.lo.
471 (INCLUDES) Add opcode directory to list.
472 New dependency entry for arc-ext.lo.
473 * disassemble.c (disassembler): Correct call to
474 arc_get_disassembler.
475 * arc-opc.c: New update for ARC, including full base
476 instructions for ARC variants.
477 * arc-dis.h, arc-dis.c: New update for ARC, including
478 extensibility functionality.
479 * arc-ext.h, arc-ext.c: New files for handling extensibility.
481 2000-12-03 Chris Demetriou cgd@sibyte.com
483 * mips-opc.c (mips_builtin_opcodes): Use the WR_HILO, RD_HILO,
484 MOD_HILO, and MOD_LO macros.
486 * mips-opc.c (M1, M2): Delete.
487 (mips_builtin_opcodes): Remove all uses of M1.
489 * mips-opc.c (mips_builtin_opcodes): Make the dmfc2 and dmtc2
490 instructions take "G" format second operands and use the
492 There are mfc3 and mtc3 opcodes, so add dmfc3 and dmtc3 opcodes to
494 Delete "sel" code operands from mfc1 and mtc1.
495 Add MIPS64 opcode changes (dclo, dclz), and "sel" code variants
498 2000-12-03 Ed Satterthwaite ehs@sibyte.com and
499 Chris Demetriou cgd@sibyte.com
501 * mips-opc.c (mips_builtin_opcodes): Finish additions
502 for MIPS32 support, and clean up existing entries for
503 aesthetics, consistency with the MIPS32 ISA, and
504 with consistency the rest of the table.
506 2000-12-01 Nick Clifton <nickc@redhat.com>
508 * mips16-opc.c (mips16_opcodes): Add initialiser for membership
511 2000-12-01 Chris Demetriou <cgd@sibyte.com>
513 mips-dis.c (print_insn_arg): Handle new 'U' and 'J' argument
514 specifiers. Update 'B' for new constant names, and remove
516 mips-opc.c (mips_builtin_opcodes): Place "pref" and "ssnop"
517 near the top of the array, so they are disassembled properly.
518 Enable "ssnop" for MIPS32. Add "break" variant with 20 bit
519 code for MIPS32. Update "clo" and "clz" to use 'U' operand
520 specifier. Add 'H' format specifier variants for "mfc1,"
521 "mfc2," "mfc3," "mtc1," "mtc2," and "mtc3" for MIPS32. Update
522 MIPS32 "sdbbp" to use 'B' operand specifier. Add MIPS32
523 "wait" variant which uses 'J' operand specifier.
525 * mips-dis.c (set_mips_isa_type): Update to use
526 CPU_UNKNOWN and ISA_* constants. Add bfd_mach_mips32 case.
527 Replace bfd_mach_mips4K with bfd_mach_mips32_4k case.
528 * mips-opc.c (I32): New constant for instructions added in
531 (mips_builtin_opcodes) Replace all uses of P4 with I32.
533 * mips-dis.c (set_mips_isa_type): Add cases for
534 bfd_mach_mips5 and bfd_mach_mips64.
535 * mips-opc.c (I64): New definitions.
537 * mips-dis.c (set_mips_isa_type): Add case for
540 2000-11-28 Hans-Peter Nilsson <hp@bitrange.com>
542 * sh-dis.c (print_insn_ddt): Make insn_x, insn_y unsigned.
543 (print_insn_ppi): Make nib1, nib2, nib3 unsigned.
544 Initialize variable dc to NULL.
545 (print_insn_shx): Remove unused label d_reg_n.
547 2000-11-24 Nick Clifton <nickc@redhat.com>
549 * arm-opc.h: Add new opcode formatting parameter 'B'.
550 (arm_opcodes): Add XScale, v5, and v5te instructions.
551 (thumb_opcodes): Add v5t instructions.
553 * arm-dis.c (print_insn_arm): Handle new 'B' format
555 (print_insn_thumb): Decode BLX(1) instruction.
557 2000-11-21 Chris Demetriou <cgd@sibyte.com>
559 * mips-opc.c: Fix file header comment.
561 2000-11-14 Hans-Peter Nilsson <hp@axis.com>
563 * cris-dis.c (cris_get_disassembler): If abfd is NULL, return
564 print_insn_cris_with_register_prefix.
566 2000-11-11 Alexandre Oliva <aoliva@redhat.com>
568 * sh-opc.h: The operand of `mov.w r0, (<disp>,GBR)' is IMM1, not 0.
570 2000-11-07 Matthew Green <mrg@redhat.com>
572 * cgen-dis.in (print_insn): All insns which can fit into insn_value
573 must be loaded there in their entirety.
575 2000-10-20 Jakub Jelinek <jakub@redhat.com>
577 * sparc-dis.c (v9a_asr_reg_names): Add v9b ASRs.
578 (compute_arch_mask): Add v8plusb and v9b machines.
579 (print_insn_sparc): siam mode decoding, accept ASRs up to 25.
580 * sparc-opc.c: Support for Cheetah instruction set.
581 (prefetch_table): Add #invalidate.
583 2000-10-16 Nick Clifton <nickc@redhat.com>
585 * mcore-dis.c (imsk): Change mask for OC to 0xFE00.
587 2000-10-06 Dave Brolley <brolley@redhat.com>
589 * fr30-desc.h: Regenerate.
590 * m32r-desc.h: Regenerate.
591 * m32r-ibld.c: Regenerate.
593 2000-10-05 Jim Wilson <wilson@redhat.com>
595 * ia64-ic.tbl: Update from Intel.
596 * ia64-asmtab.c: Regenerate.
598 2000-10-04 Kazu Hirata <kazu@hxi.com>
600 * ia64-gen.c: Convert C++-style comments to C-style comments.
601 * tic54x-dis.c: Likewise.
603 2000-09-29 Hans-Peter Nilsson <hp@axis.com>
605 Changes to add dollar prefix to registers for files where user symbols
606 don't have a leading underscore. Fix formatting.
607 * cris-dis.c (REGISTER_PREFIX_CHAR): New.
608 (format_reg): Add parameter with_reg_prefix. All callers changed.
609 (print_with_operands): Ditto.
610 (print_insn_cris_generic): Renamed from print_insn_cris, add
611 parameter with_reg_prefix.
612 (print_insn_cris_with_register_prefix,
613 print_insn_cris_without_register_prefix, cris_get_disassembler):
615 * disassemble.c (disassembler) [ARCH_cris]: Call cris_get_disassembler.
617 2000-09-22 Jim Wilson <wilson@redhat.com>
619 * ia64-opc-f.c (ia64_opcodes_f): Add fpcmp pseudo-ops for
620 gt, ge, ngt, and nge.
621 * ia64-asmtab.c: Regenerate.
623 * ia64-dis.c (print_insn_ia64): Revert Aug 7 byte skip count change.
624 * ia64-gen.c (parse_semantics): Handle IA64_DVS_STOP.
625 (lookup_specifier): Handle "PR%, 1 to 15" and "PR%, 16 to 62".
626 * ia64-ic.tbl, ia64-raw.tbl, ia64-war.tbl, ia64-waw.tbl: Update.
627 * ia64-asmtab.c: Regnerate.
629 2000-09-13 Anders Norlander <anorland@acc.umu.se>
631 * mips-opc.c (mips_builtin_opcodes): Support cache instruction on 4K cores.
632 Add mfc0 and mtc0 with sub-selection values.
633 Add clo and clz opcodes.
634 Add msub and msubu instructions for MIPS32.
635 Add madd/maddu aliases for mad/madu for MIPS32.
636 Support wait, deret, eret, movn, pref for MIPS32.
637 Support tlbp, tlbr, tlbwi, tlbwr.
640 * mips-dis.c (print_insn_arg): Print sdbbp 'm' args.
641 (print_insn_arg): Handle 'H' args.
642 (set_mips_isa_type): Recognize 4K.
643 Use CPU_* defines instead of hardcoded numbers.
645 2000-09-11 Catherine Moore <clm@redhat.com>
647 * d30v-opc.c (d30v_operand_t): New operand type Rb2.
648 (d30v_format_tab): Use Rb2 for modinc and moddec.
650 2000-09-07 Catherine Moore <clm@redhat.com>
652 * d30v-opc.c (d30v_format_tab): Use format Ra for
655 2000-09-06 Alexandre Oliva <aoliva@redhat.com>
657 * configure: Rebuilt with new libtool.m4.
659 2000-09-05 Nick Clifton <nickc@redhat.com>
661 * configure: Regenerate.
662 * po/opcodes.pot: Regenerate.
664 2000-08-31 Alexandre Oliva <aoliva@redhat.com>
666 * acinclude.m4: Include libtool and gettext macros from the
668 * aclocal.m4, configure: Rebuilt.
670 2000-08-30 Kazu Hirata <kazu@hxi.com>
672 * tic80-dis.c: Fix formatting.
674 2000-08-29 Kazu Hirata <kazu@hxi.com>
676 * w65-dis.c: Fix formatting.
678 2000-08-28 Mark Hatle <mhatle@mvista.com>
680 * ppc-opc.c: Add XTLB macro for a few PPC 4xx extended mnemonics.
681 (powerpc_opcodes): Add table entries for PPC 405 instructions.
682 Changed rfci, icbt, mfdcr, dccci, mtdcr, iccci from PPC to PPC403
683 instructions. Added extended mnemonic mftbl as defined in the
684 405GP manual for all PPCs.
686 2000-08-28 Jim Wilson <wilson@redhat.com>
688 * ia64-dis.c (print_insn_ia64): Add failed label after ia64_free_opcode
689 call. Change last goto to use failed instead of done.
691 2000-08-28 Dave Brolley <brolley@redhat.com>
693 * cgen-ibld.in (cgen_put_insn_int_value): New function.
694 (insert_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
695 (insert_insn_normal): Use cgen_put_insn_int_value with CGEN_INT_INSN_P.
696 (extract_normal): Allow for non-zero word_offset with CGEN_INT_INSN_P.
697 * cgen-dis.in (read_insn): New static function.
698 (print_insn): Use read_insn to read the insn into the buffer and set
700 (print_insn): in CGEN_INT_INSN_P, make sure that the entire insn is
702 * fr30-asm.c: Regenerated.
703 * fr30-desc.c: Regenerated.
704 * fr30-desc.h: Regenerated.
705 * fr30-dis.c: Regenerated.
706 * fr30-ibld.c: Regenerated.
707 * fr30-opc.c: Regenerated.
708 * fr30-opc.h: Regenerated.
709 * m32r-asm.c: Regenerated.
710 * m32r-desc.c: Regenerated.
711 * m32r-desc.h: Regenerated.
712 * m32r-dis.c: Regenerated.
713 * m32r-ibld.c: Regenerated.
714 * m32r-opc.c: Regenerated.
716 2000-08-28 Kazu Hirata <kazu@hxi.com>
718 * tic30-dis.c: Fix formatting.
720 2000-08-27 Kazu Hirata <kazu@hxi.com>
722 * sh-dis.c: Fix formatting.
724 2000-08-24 David Edelsohn <dje@watson.ibm.com>
726 * ppc-opc.c (powerpc_opcodes): Add rfid, mtsrd, mtsrdin, mtmsrd.
728 2000-08-24 Kazu Hirata <kazu@hxi.com>
730 * z8k-dis.c: Fix formatting.
732 2000-08-16 Jim Wilson <wilson@redhat.com>
734 * ia64-ic.tbl (pr-readers-nobr-nomovpr): Add addl, adds. Delete
735 break, mov-immediate, nop.
736 * ia64-opc-f.c: Delete fpsub instructions.
737 * ia64-opc-m.c: Add POSTINC to all instructions with postincrement
738 address operand. Rewrite using macros to avoid long lines.
739 * ia64-opc.h (POSTINC): Define.
740 * ia64-asmtab.c: Regenerate.
742 2000-08-15 Jim Wilson <wilson@redhat.com>
744 * ia64-ic.tbl: Add missing entries.
746 2000-08-08 Jason Eckhardt <jle@redhat.com>
748 * i860-dis.c (print_br_address): Change third argument from int
751 2000-08-07 Richard Henderson <rth@redhat.com>
753 * ia64-dis.c (print_insn_ia64): Get byte skip count correct
754 for MLI templates. Handle IA64_OPND_TGT64.
756 2000-08-04 Ben Elliston <bje@redhat.com>
758 * cgen-dis.in, cgen-asm.in, cgen-ibld.in: New files.
761 2000-08-02 Jim Wilson <wilson@redhat.com>
763 * ia64-dis.c (print_insn_ia64): Call ia64_free_opcode at end.
765 2000-07-29 Marek Michalkiewicz <marekm@linux.org.pl>
767 * avr-dis.c (avr_operand): Use PARAMS macro in declaration.
768 Change return type from void to int. Check the combination
769 of operands, return 1 if valid. Fix to avoid BUF overflow.
770 Report undefined combinations of operands in COMMENT.
771 Report internal errors to stderr. Output the adiw/sbiw
772 constant operand in both decimal and hex.
773 (print_insn_avr): Disassemble ldd/std with displacement of 0
774 as ld/st. Check avr_operand () return value, handle invalid
775 combinations of operands like unknown opcodes.
777 2000-07-28 Ben Elliston <bje@redhat.com>
779 * Makefile.am (CGEN, CGENDEPS, CGENDIR, CGENFLAGS): New.
780 (run-cgen, stamp-m32r, stamp-fr30): New targets.
781 * Makefile.in: Regenerate.
782 * configure.in: Add --enable-cgen-maint option.
783 * configure: Regenerate.
785 2000-07-26 Dave Brolley <brolley@redhat.com>
787 * cgen-opc.c (cgen_hw_lookup_by_name): 'i' is now unsigned.
788 (cgen_hw_lookup_by_num): Ditto.
789 (cgen_operand_lookup_by_name): Ditto.
790 (print_address): Ditto.
791 (print_keyword): Ditto.
792 * cgen-dis.c (hash_insn_array): Mark unused parameters with
794 * cgen-asm.c (hash_insn_array): Mark unused parameters with
796 (cgen_parse_keyword): Ditto.
798 2000-07-22 Jason Eckhardt <jle@redhat.com>
800 * i860-dis.c: New file.
801 (print_insn_i860): New function.
802 (print_br_address): New function.
803 (sign_extend): New function.
804 (BITWISE_OP): New macro.
805 (I860_REG_PREFIX): New macro.
806 (grnames, frnames, crnames): New structures.
808 * disassemble.c (ARCH_i860): Define.
809 (disassembler): Add check for bfd_arch_i860 to set disassemble
810 function to print_insn_i860.
812 * Makefile.in (CFILES): Added i860-dis.c.
813 (ALL_MACHINES): Added i860-dis.lo.
814 (i860-dis.lo): New dependences.
816 * configure.in: New bits for bfd_i860_arch.
818 * configure: Regenerated.
820 2000-07-20 Hans-Peter Nilsson <hp@axis.com>
822 * Makefile.am (CFILES): Add cris-dis.c and cris-opc.c.
823 (ALL_MACHINES): Add cris-dis.lo and cris-opc.lo.
824 (cris-dis.lo, cris-opc.lo): New rules.
825 * Makefile.in: Rebuild.
826 * configure.in (bfd_cris_arch): New target.
827 * configure: Rebuild.
828 * disassemble.c (ARCH_cris): Define.
829 (disassembler): Support ARCH_cris.
830 * cris-dis.c, cris-opc.c: New files.
831 * po/POTFILES.in, po/opcodes.pot: Regenerate.
833 2000-07-11 Jakub Jelinek <jakub@redhat.com>
835 * sparc-opc.c (sparc_opcodes): popc has 0 in rs1, not rs2.
836 Reported by Bill Clarke <llib@computer.org>.
838 2000-07-09 Geoffrey Keating <geoffk@redhat.com>
840 * ppc-opc.c (powerpc_opcodes): Correct suffix for vslw.
841 Patch by Randall J Fisher <rfisher@ecn.purdue.edu>.
843 2000-07-09 Alan Modra <alan@linuxcare.com.au>
845 * hppa-dis.c (fput_reg, fput_fp_reg, fput_fp_reg_r, fput_creg,
846 fput_const, extract_3, extract_5_load, extract_5_store,
847 extract_5r_store, extract_5R_store, extract_10U_store,
848 extract_5Q_store, extract_11, extract_14, extract_16, extract_21,
849 extract_12, extract_17, extract_22): Prototype.
850 (print_insn_hppa): Rename inner block opcode -> opc to avoid
851 shadowing outer block.
854 2000-07-05 DJ Delorie <dj@redhat.com>
858 2000-07-04 Alexandre Oliva <aoliva@redhat.com>
860 * arm-dis.c (print_insn_arm): Output combinations of PSR flags.
862 2000-07-03 Marek Michalkiewicz <marekm@linux.org.pl>
864 * avr-dis.c (avr_operand): Change _ () to _() around all strings
865 marked for translation (exception from the usual coding style).
866 (print_insn_avr): Initialize insn2 to avoid warnings.
868 2000-07-03 Kazu Hirata <kazu@hxi.com>
870 * h8300-dis.c (bfd_h8_disassemble): Improve readability.
871 * h8500-dis.c: Fix formatting.
873 2000-07-01 Alan Modra <alan@linuxcare.com.au>
875 * Makefile.am (DEP): Fix 2000-06-22. grep after running dep.sed
876 (CLEANFILES): Add DEPA.
877 * Makefile.in: Regenerate.
879 2000-06-26 Scott Bambrough <scottb@netwinder.org>
881 * arm-dis.c (regnames): Add an additional register set to match
882 the set used by GCC. Make it the default.
884 2000-06-22 Alan Modra <alan@linuxcare.com.au>
886 * Makefile.am (DEP): grep for leading `/' in DEP1, and fail if we
888 * Makefile.in: Regenerate.
890 2000-06-20 H.J. Lu <hjl@gnu.org>
892 * Makefile.am: Rebuild dependency.
893 * Makefile.in: Rebuild.
895 2000-06-18 Stephane Carrez <stcarrez@worldnet.fr>
897 * Makefile.in, configure: regenerate
898 * disassemble.c (disassembler): Recognize ARCH_m68hc12,
900 * m68hc11-dis.c (read_memory, print_insn, print_insn_m68hc12):
902 * configure.in: Recognize m68hc12 and m68hc11.
903 * m68hc11-dis.c, m68hc11-opc.c: New files for support of m68hc1x
904 * Makefile.am (CFILES, ALL_MACHINES): New files for disassembly
905 and opcode generation for m68hc11 and m68hc12.
907 2000-06-16 Nick Duffek <nsd@redhat.com>
909 * disassemble.c (disassembler): Refer to the PowerPC 620 using
910 bfd_mach_ppc_620 instead of 620.
912 2000-06-12 Kazu Hirata <kazu@hxi.com>
914 * h8300-dis.c: Fix formatting.
915 (bfd_h8_disassemble): Distinguish adds/subs, inc/dec.[wl]
918 2000-06-09 Denis Chertykov <denisc@overta.ru>
920 * avr-dis.c (avr_operand): Bugfix for jmp/call address.
922 2000-06-07 Denis Chertykov <denisc@overta.ru>
924 * avr-dis.c: completely rewritten.
926 2000-06-02 Kazu Hirata <kazu@hxi.com>
928 * h8300-dis.c: Follow the GNU coding style.
929 (bfd_h8_disassemble) Fix a typo.
931 2000-06-01 Kazu Hirata <kazu@hxi.com>
933 * h8300-dis.c (bfd_h8_disassemble_init): Fix a typo.
934 (bfd_h8_disassemble): Distinguish the operand size of inc/dev.[wl]
935 correctly. Fix a typo.
937 2000-05-31 Nick Clifton <nickc@redhat.com>
939 * opintl.h (_(String)): Explain why dgettext is used instead of
942 2000-05-30 Nick Clifton <nickc@redhat.com>
944 * opintl.h (gettext, dgettext, dcgettext, textdomain,
945 bindtextdomain): Replace defines with those from intl/libgettext.h
946 to quieten gcc warnings.
948 2000-05-26 Alan Modra <alan@linuxcare.com.au>
950 * Makefile.am: Update dependencies with "make dep-am"
951 * Makefile.in: Regenerate.
953 2000-05-25 Alexandre Oliva <aoliva@redhat.com>
955 * m10300-dis.c (disassemble): Don't assume 32-bit longs when
956 sign-extending operands.
958 2000-05-15 Donald Lindsay <dlindsay@redhat.com>
960 * d10v-opc.c (d10v_opcodes): add ALONE tag to all short branches
963 2000-05-21 Nick Clifton <nickc@redhat.com>
965 * Makefile.am (LIBIBERTY): Define.
967 2000-05-19 Diego Novillo <dnovillo@redhat.com>
969 * mips-dis.c (REGISTER_NAMES): Rename to STD_REGISTER_NAMES.
970 (STD_REGISTER_NAMES): New name for REGISTER_NAMES.
971 (reg_names): Rename to std_reg_names. Change it to a char **
973 (std_reg_names): New name for reg_names.
974 (set_mips_isa_type): Set reg_names to point to std_reg_names by
977 2000-05-16 Frank Ch. Eigler <fche@redhat.com>
979 * fr30-desc.h: Partially regenerated to account for changed
980 CGEN_MAX_* -> CGEN_ACTUAL_MAX_* macros.
981 * m32r-desc.h: Ditto.
983 2000-05-15 Nick Clifton <nickc@redhat.com>
985 * arm-opc.h: Use upper case for flasg in MSR and MRS
986 instructions. Allow any bit to be set in the field_mask of
989 * arm-dis.c (print_insn_arm): Decode _x and _s bits of the
990 field_mask of an MSR instruction.
992 2000-05-11 Thomas de Lellis <tdel@windriver.com>
994 * arm-opc.h: Disassembly of thumb ldsb/ldsh
995 instructions changed to ldrsb/ldrsh.
997 2000-05-11 Ulf Carlsson <ulfc@engr.sgi.com>
999 * mips-dis.c (print_insn_arg): Don't mask top 32 bits of 64-bit
1000 target addresses for 'jal' and 'j'.
1002 2000-05-10 Geoff Keating <geoffk@redhat.com>
1004 * ppc-opc.c (powerpc_opcodes): Make the predicted-branch opcodes
1005 also available in common mode when powerpc syntax is being used.
1007 2000-05-08 Alan Modra <alan@linuxcare.com.au>
1009 * m68k-dis.c (dummy_printer): Add ATTRIBUTE_UNUSED to args.
1010 (dummy_print_address): Ditto.
1012 2000-05-04 Timothy Wall <twall@redhat.com>
1014 * tic54x-opc.c: New.
1015 * tic54x-dis.c: New.
1016 * disassemble.c (disassembler): Add ARCH_tic54x.
1017 * configure.in: Added tic54x target.
1019 * Makefile.am: Add tic54x dependencies.
1020 * Makefile.in: Ditto.
1022 2000-05-03 J.T. Conklin <jtc@redback.com>
1024 * ppc-opc.c (VA, VB, VC, VD, VS, SIMM, UIMM, SHB): New macros, for
1025 vector unit operands.
1026 (VX, VX_MASK, VXA, VXA_MASK, VXR, VXR_MASK): New macros, for vector
1027 unit instruction formats.
1028 (PPCVEC): New macro, mask for vector instructions.
1029 (powerpc_operands): Add table entries for above operand types.
1030 (powerpc_opcodes): Add table entries for vector instructions.
1032 * ppc-dis.c (print_insn_big_powerpc): Add PPC_OPCODE_ALTIVEC to mask.
1033 (print_insn_little_powerpc): Likewise.
1034 (print_insn_powerpc): Prepend 'v' when printing vector registers.
1036 2000-04-24 Clinton Popetz <cpopetz@redhat.com>
1038 * configure.in: Add bfd_powerpc_64_arch.
1039 * disassemble.c (disassembler): Use print_insn_big_powerpc for
1042 2000-04-24 Nick Clifton <nickc@redhat.com>
1044 * fr30-desc.c (fr30_cgen_cpu_open): Initialise signed_overflow
1047 2000-04-23 Denis Chertykov <denisc@overta.ru>
1049 * avr-dis.c (reg_fmul_d): New. Extract destination register from
1051 (reg_fmul_r): New. Extract source register from FMUL instruction.
1052 (reg_muls_d): New. Extract destination register from MULS instruction.
1053 (reg_muls_r): New. Extract source register from MULS instruction.
1054 (reg_movw_d): New. Extract destination register from MOVW instruction.
1055 (reg_movw_r): New. Extract source register from MOVW instruction.
1056 (print_insn_avr): Handle MOVW, MULS, MULSU, FMUL, FMULS, FMULSU,
1057 EICALL, EIJMP, LPM r,Z, ELPM r,Z, SPM, ESPM instructions.
1059 2000-04-22 Timothy Wall <twall@redhat.com>
1061 * ia64-gen.c (general): Add an ordered table of primary
1062 opcode names, as well as priority fields to disassembly data
1063 structures to enforce a preferred disassembly format based on the
1064 ordering of the opcode tables.
1065 (load_insn_classes): Show a useful message if IC tables are missing.
1066 (load_depfile): Ditto.
1067 * ia64-asmtab.h (struct ia64_dis_names ): Add priority flag to
1068 distinguish preferred disassembly.
1069 * ia64-opc-f.c: Reorder some insn for preferred disassembly
1070 format. Fix incorrect flag on fma.s/fma.s.s0.
1071 * ia64-opc.c: Scan *all* disassembly matches and use the one with
1072 the highest priority.
1073 * ia64-opc-b.c: Use more abbreviations.
1074 * ia64-asmtab.c: Regenerate.
1076 2000-04-21 Jason Eckhardt <jle@redhat.com>
1078 * hppa-dis.c (extract_16): New function.
1079 (print_insn_hppa): Fix incorrect handling of 'fe'. Added handling of
1080 new operand types l,y,&,fe,fE,fx.
1082 2000-04-21 Richard Henderson <rth@redhat.com>
1083 David Mosberger <davidm@hpl.hp.com>
1084 Timothy Wall <twall@redhat.com>
1085 Bob Manson <manson@charmed.cygnus.com>
1086 Jim Wilson <wilson@redhat.com>
1088 * Makefile.am (HFILES): Add ia64-asmtab.h, ia64-opc.h.
1089 (CFILES): Add ia64-dis.c, ia64-opc-a.c, ia64-opc-b.c, ia64-opc-f.c,
1090 ia64-opc-i.c, ia64-opc-m.c, ia64-opc-d.c, ia64-opc.c, ia64-gen.c,
1092 (ALL_MACHINES): Add ia64-dis.lo, ia64-opc.lo.
1093 (ia64-ic.tbl, ia64-raw.tbl, ia64-waw.tbl, ia64-war.tbl, ia64-gen,
1094 ia64-gen.o, ia64-asmtab.c, ia64-dis.lo, ia64-opc.lo): New rules.
1095 * Makefile.in: Rebuild.
1096 * configure Rebuild.
1097 * configure.in (bfd_ia64_arch): New target.
1098 * disassemble.c (ARCH_ia64): Define.
1099 (disassembler): Support ARCH_ia64.
1100 * ia64-asmtab.c, ia64-asmtab.h, ia64-dis.c, ia64-gen.c ia64-ic.tbl,
1101 ia64-opc-a.c, ia64-opc-b.c, ia64-opc-d.c ia64-opc-f.c, ia64-opc-i.c,
1102 ia64-opc-m.c, ia64-opc-x.c, ia64-opc.c, ia64-opc.h, ia64-raw.tbl,
1103 ia64-war.tbl, ia64-waw.tbl: New files.
1105 2000-04-20 Alexandre Oliva <aoliva@redhat.com>
1107 * m10300-dis.c (HAVE_AM30, HAVE_AM33): Define.
1108 (disassemble): Use them.
1110 2000-04-14 Alan Modra <alan@linuxcare.com.au>
1112 * sysdep.h: Include "ansidecl.h" not <ansidecl.h>
1113 * Makefile.am: Update dependencies.
1114 * Makefile.in: Regenerate.
1116 2000-04-14 Michael Sokolov <msokolov@ivan.Harhan.ORG>
1118 * a29k-dis.c, alpha-dis.c, alpha-opc.c, arc-dis.c, arc-opc.c,
1119 avr-dis.c, d10v-dis.c, d10v-opc.c, d30v-dis.c, d30v-opc.c,
1120 disassemble.c, h8300-dis.c, h8500-dis.c, hppa-dis.c, i370-dis.c,
1121 i370-opc.c, i960-dis.c, m10200-dis.c, m10200-opc.c, m10300-dis.c,
1122 m10300-opc.c, m68k-dis.c, m68k-opc.c, m88k-dis.c, mcore-dis.c,
1123 mips-dis.c, mips-opc.c, mips16-opc.c, pj-dis.c, pj-opc.c,
1124 ppc-dis.c, ppc-opc.c, sh-dis.c, sparc-dis.c, sparc-opc.c,
1125 tic80-dis.c, tic80-opc.c, v850-dis.c, v850-opc.c, vax-dis.c,
1126 w65-dis.c, z8k-dis.c, z8kgen.c: Include sysdep.h. Remove
1127 ansidecl.h as sysdep.h includes it.
1129 2000-04-7 Andrew Cagney <cagney@b1.redhat.com>
1131 * configure.in (WARN_CFLAGS): Set to -W -Wall by default. Add
1132 --enable-build-warnings option.
1133 * Makefile.am (AM_CFLAGS, WARN_CFLAGS): Add definitions.
1134 * Makefile.in, configure: Re-generate.
1136 2000-04-05 J"orn Rennecke <amylaar@redhat.com>
1138 * sh-opc.h (sh_table): Use A_DISP_PC / PCRELIMM_8BY2 for ldre & ldrs.
1139 stc GBR,@-<REG_N> is available for arch_sh1_up.
1140 Group parallel processing insn with identical mnemonics together.
1141 Make three-operand psha / pshl come first.
1143 2000-04-05 J"orn Rennecke <amylaar@redhat.co.uk>
1145 * sh-opc.h (sh_nibble_type): Remove DISP_8 and DISP_4.
1146 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1147 (sh_arg_type): Add A_PC.
1148 (sh_table): Update entries using immediates. Add repeat.
1149 * sh-dis.c (print_insn_shx): Remove DISP_8 and DISP_4.
1150 Split IMM_[48]{,BY[24]} into IMM[01]_[48]{,BY[24]}. Add REPEAT.
1152 2000-04-04 Alan Modra <alan@linuxcare.com.au>
1154 * po/opcodes.pot: Regenerate.
1156 * Makefile.am (MKDEP): Use gcc -MM rather than mkdep.
1157 (DEP): Quote when passing vars to sub-make. Add warning message
1159 (DEP1): Rewrite for "gcc -MM".
1160 (CLEANFILES): Add DEP2.
1161 Update dependencies.
1162 * Makefile.in: Regenerate.
1164 2000-04-03 Denis Chertykov <denisc@overta.ru>
1166 * avr-dis.c: Syntax cleanup.
1167 (add0fff): Print the pc relative address as a signed number.
1168 (add03f8): Likewise.
1170 2000-04-01 Ian Lance Taylor <ian@zembu.com>
1172 * disassemble.c (disassembler_usage): Don't use a prototype. Mark
1173 the parameter ATTRIBUTE_UNUSED.
1174 * ppc-opc.c: Add ATTRIBUTE_UNUSED as needed.
1176 2000-04-01 Alexandre Oliva <aoliva@redhat.com>
1178 * m10300-opc.c: SP-based offsets are always unsigned.
1180 2000-03-29 Thomas de Lellis <tdel@windriver.com>
1182 * arm-opc.h (thumb_opcodes): Disassemble 0xde.. to "bal"
1183 [branch always] instead of "undefined".
1185 2000-03-27 Nick Clifton <nickc@redhat.com>
1187 * d30v-opc.c (d30v_format_table): Move SHORT_AR to end of list of
1188 short instructions, from end of list of long instructions.
1190 2000-03-27 Ian Lance Taylor <ian@zembu.com>
1192 * Makefile.am (CFILES): Add avr-dis.c.
1193 (ALL_MACHINES): Add avr-dis.lo.
1195 2000-03-27 Alan Modra <alan@linuxcare.com>
1197 * avr-dis.c (add0fff, add03f8): Don't use structure bitfields to
1199 (print_insn_avr): Call function via pointer in K&R compatible way.
1200 (dispLDD, regPP, reg50, reg104, reg40, reg20w, lit404, lit204,
1201 add0fff, add03f8): Convert to old style function declaration and
1203 (avrdis_opcode): Add prototype.
1205 2000-03-27 Denis Chertykov <denisc@overta.ru>
1207 * avr-dis.c: New file. AVR disassembler.
1208 * configure.in (bfd_avr_arch): New architecture support.
1209 * disassemble.c: Likewise.
1210 * configure: Regenerate.
1212 2000-03-06 J"oern Rennecke <amylaar@redhat.com>
1214 * sh-opc.h (sh_table): ldre and ldrs have a *signed* displacement.
1216 2000-03-02 J"orn Rennecke <amylaar@redhat.co.uk>
1218 * d30v-dis.c (print_insn): Remove d*i hacks. Use per-operand
1219 flag to determine if operand is pc-relative.
1221 (d30v_format_table):
1222 (REL6S3): Renamed from IMM6S3.
1223 Added flag OPERAND_PCREL.
1224 (REL12S3, REL18S3, REL32): Split from IMM12S3, IMM18S3, REL32, with
1225 added flag OPERAND_PCREL.
1226 (IMM12S3U): Replaced with REL12S3.
1227 (SHORT_D2, LONG_D): Delay target is pc-relative.
1228 (SHORT_B2r, SHORT_B3r, SHORT_B3br, SHORT_D2r, LONG_Ur, LONG_2r):
1229 Split from SHORT_B2, SHORT_D2, SHORT_B3b, SHORT_D2, LONG_U, LONG_2r,
1230 using the REL* operands.
1231 (LONG_2br, LONG_Dr): Likewise, from LONG_2b, LONG_D.
1232 (SHORT_D1r, SHORT_D2Br, LONG_Dbr): Renamed from SHORT_D1, SHORT_D2B,
1233 LONG_Db, using REL* operands.
1234 (SHORT_U, SHORT_A5S): Removed stray alternatives.
1235 (d30v_opcode_table): Use new *r formats.
1237 2000-02-28 Nick Clifton <nickc@redhat.com>
1239 * m32r-desc.c (m32r_cgen_cpu_open): Replace 'flags' with
1240 'signed_overflow_ok_p'.
1242 2000-02-27 Eli Zaretskii <eliz@is.elta.co.il>
1244 * Makefile.am (stamp-lib): Use $(LIBTOOL) --config to get the
1245 name of the libtool directory.
1246 * Makefile.in: Rebuild.
1248 2000-02-24 Nick Clifton <nickc@redhat.com>
1250 * cgen-opc.c (cgen_set_signed_overflow_ok): New function.
1251 (cgen_clear_signed_overflow_ok): New function.
1252 (cgen_signed_overflow_ok_p): New function.
1254 2000-02-23 Andrew Haley <aph@redhat.com>
1256 * m32r-asm.c, m32r-desc.c, m32r-desc.h, m32r-dis.c,
1257 m32r-ibld.c, m32r-opc.h: Rebuild.
1259 2000-02-23 Linas Vepstas <linas@linas.org>
1261 * i370-dis.c, i370-opc.c: New.
1263 * disassemble.c (ARCH_i370): Define.
1264 (disassembler): Handle it.
1266 * Makefile.am: Add support for Linux/IBM 370.
1267 * configure.in: Likewise.
1269 * Makefile.in: Regenerate.
1270 * configure: Likewise.
1272 2000-02-22 Chandra Chavva <cchavva@redhat.com>
1274 * d30v-opc.c (d30v_opcode_tab) : Added FLAG_NOT_WITH_ADDSUBppp to
1275 ST2H, STB, STH, STHH, STW and ST2H opcodes to prohibit parallel
1278 2000-02-22 Andrew Haley <aph@redhat.com>
1280 * mips-dis.c (_print_insn_mips): New arg for OPCODE_IS_MEMBER:
1282 * mips-opc.c (G6): New define.
1283 (mips_builtin_op): Add "move" definition for -gp32.
1285 2000-02-22 Ian Lance Taylor <ian@zembu.com>
1287 From Grant Erickson <gerickso@Brocade.COM>:
1288 * ppc-opc.c: Correct dcread--it takes 3 arguments, not 2.
1290 2000-02-21 Alan Modra <alan@spri.levels.unisa.edu.au>
1292 * dis-buf.c (buffer_read_memory): Change `length' param and all int
1295 2000-02-17 J"orn Rennecke <amylaar@redhat.co.uk>
1297 * sh-dis.c (print_movxy, print_insn_ddt, print_dsp_reg): New functions.
1298 (print_insn_ppi): Likewise.
1299 (print_insn_shx): Use info->mach to select appropriate insn set.
1300 Add support for sh-dsp. Remove FD_REG_N support.
1301 * sh-opc.h (sh_nibble_type): Add new values for sh-dsp support.
1302 (sh_arg_type): Likewise. Remove FD_REG_N.
1303 (sh_dsp_reg_nums): New enum.
1304 (arch_sh1, arch_sh2, arch_sh3, arch_sh3e, arch_sh4): New macros.
1305 (arch_sh_dsp, arch_sh3_dsp, arch_sh1_up, arch_sh2_up): Likewise.
1306 (arch_sh3_up, arch_sh3e_up, arch_sh4_up, arch_sh_dsp_up): Likewise.
1307 (arch_sh3_dsp_up): Likewise.
1308 (sh_opcode_info): New field: arch.
1309 (sh_table): Split up insn with FD_REG_N into ones with F_REG_N and
1310 D_REG_N. Fill in arch field. Add sh-dsp insns.
1312 2000-02-14 Fernando Nasser <fnasser@totem.to.redhat.com>
1314 * arm-dis.c: Change flavor name from atpcs-special to
1315 special-atpcs to prevent name conflict in gdb.
1316 (get_arm_regname_num_options, set_arm_regname_option,
1317 get_arm_regnames): New functions. API to access the several
1318 flavor of register names. Note: Used by gdb.
1319 (print_insn_thumb): Use the register name entry from the currently
1320 selected flavor for LR and PC.
1322 2000-02-10 Nick Clifton <nickc@redhat.com>
1324 * mcore-opc.h (enum mcore_opclass): Add MULSH and OPSR
1326 (mcore_table): Add "idly4", "psrclr", "psrset", "mulsh" and
1327 "mulsh.h" instructions.
1328 * mcore-dis.c (imsk array): Add masks for MULSH and OPSR
1330 (print_insn_mcore): Add support for little endian targets.
1331 Add support for MULSH and OPSR classes.
1333 2000-02-07 Nick Clifton <nickc@redhat.com>
1335 * arm-dis.c (parse_arm_diassembler_option): Rename again.
1336 Previous delat did not take.
1338 2000-02-03 Timothy Wall <twall@redhat.com>
1340 * dis-buf.c (buffer_read_memory): Use octets_per_byte field
1341 to adjust target address bounds checking and calculate the
1342 appropriate octet offset into data.
1344 2000-01-27 Nick Clifton <nickc@redhat.com>
1346 * arm-dis.c: (parse_disassembler_option): Rename to
1347 parse_arm_disassembler_option and allow to be exported.
1349 * disassemble.c (disassembler_usage): New function: Print out any
1350 target specific disassembler options.
1351 Call arm_disassembler_options() if the ARM architecture is being
1354 * arm-dis.c (NUM_ELEM): Define this macro if not already
1356 (arm_regname): New struct type for ARM register names.
1357 (arm_toggle_regnames): Delete.
1358 (parse_disassembler_option): Use register name structure.
1359 (print_insn): New function: Combines duplicate code found in
1360 print_insn_big_arm and print_insn_little_arm.
1361 (print_insn_big_arm): Call print_insn.
1362 (print_insn_little_arm): Call print_insn.
1363 (print_arm_disassembler_options): Display list of supported,
1364 ARM specific disassembler options.
1366 2000-01-27 Thomas de Lellis <tdel@windriver.com>
1368 * arm-dis.c (printf_insn_big_arm): Treat ELF symbols with the
1369 ARM_STT_16BIT flag as Thumb code symbols.
1371 * arm-dis.c (printf_insn_little_arm): Ditto.
1373 2000-01-25 Thomas de Lellis <tdel@windriver.com>
1375 * arm-dis.c (printf_insn_thumb): Prevent double dumping
1376 of raw thumb instructions.
1378 2000-01-20 Nick Clifton <nickc@redhat.com>
1380 * mcore-opc.h (mcore_table): Add "add" as an alias for "addu".
1382 2000-01-03 Nick Clifton <nickc@cygnus.com>
1384 * arm-dis.c (streq): New macro.
1385 (strneq): New macro.
1386 (force_thumb): ew local variable.
1387 (parse_disassembler_option): New function: Parse a single, ARM
1388 specific disassembler command line switch.
1389 (parse_disassembler_option): Call parse_disassembler_option to
1390 parse individual command line switches.
1391 (print_insn_big_arm): Check force_thumb.
1392 (print_insn_little_arm): Check force_thumb.
1394 For older changes see ChangeLog-9899
1400 version-control: never