1 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
3 * i386-dis.c (dis386_intel): Remove macro chars, except for
4 jEcxz. Change cWtR and cRtd to cW and cR.
5 (dis386_twobyte_intel): Remove macro chars here too.
6 (putop): Handle R and W macros for intel mode.
8 * i386-dis.c (SIMD_Fixup): New function.
9 (dis386_twobyte_att): Use it on movlps and movhps, and change
10 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
11 (dis386_twobyte_intel): Same here.
13 * i386-dis.c (Av): Remove.
17 (OP_SIMD_Suffix): New function.
18 (OP_DIR): Remove dead code.
19 (eAX_reg..eDI_reg): Renumber.
20 (onebyte_has_modrm): Table numbering comments.
21 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
22 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
23 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
24 and handle SIMD cmp insns in OP_SIMD_Suffix.
25 (info->bytes_per_line): Bump from 5 to 6.
27 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
28 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
30 PIII SIMD support from Doug Ledford <dledford@redhat.com>
31 * i386-dis.c (XM, EX, None): Define.
32 (OP_XMM, OP_EX, OP_None): New functions.
33 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
34 (GRP14): Rename to GRPAMD.
35 (GRP*): Add USE_GROUPS flag.
37 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
38 (twobyte_has_modrm): Add SIMD entries.
39 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
40 (grps): Add SIMD insns.
41 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
42 oappend repz if uses_f3_prefix. Add code to handle new groups for
45 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
46 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
47 operand from Av to Jv.
49 1999-05-07 Nick Clifton <nickc@cygnus.com>
51 * mcore-dis.c (print_insn_mcore): Use .short to display
52 unidentified instructions, not .word.
54 1999-04-26 Tom Tromey <tromey@cygnus.com>
56 * aclocal.m4, configure: Updated for new version of libtool.
58 1999-04-14 Doug Evans <devans@casey.cygnus.com>
60 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
61 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
63 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
65 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
68 1999-04-10 Doug Evans <devans@casey.cygnus.com>
70 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
71 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
73 1999-04-06 Ian Lance Taylor <ian@zembu.com>
75 * opintl.h (LC_MESSAGES): Never define.
77 1999-04-04 Ian Lance Taylor <ian@zembu.com>
79 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
80 (separator_char, scale_char): Likewise.
81 (print_insn_x86): Likewise.
82 (print_insn_i386): Likewise. Add declaration.
84 1999-03-26 Doug Evans <devans@casey.cygnus.com>
86 * fr30-dis.c: Rebuild.
87 * m32r-dis.c: Rebuild.
89 1999-03-23 Ian Lance Taylor <ian@zembu.com>
91 * m68k-opc.c: Change compare instructions to use "@s" rather than
92 ";s" when used with an immediate operand.
94 1999-03-22 Doug Evans <devans@casey.cygnus.com>
96 * cgen-opc.c (cgen_set_cpu): Delete.
97 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
98 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
100 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
102 * po/opcodes.pot: Rebuild.
104 1999-03-16 Martin Hunt <hunt@cygnus.com>
106 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
108 1999-03-11 Doug Evans <devans@casey.cygnus.com>
110 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
111 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
112 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
113 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
114 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
115 * m32r-opinst.c: Rebuild.
117 1999-02-25 Doug Evans <devans@casey.cygnus.com>
119 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
120 (cgen_hw_lookup_by_num): Rewrite.
121 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
122 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
123 * m32r-opinst.c: Rebuild.
125 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
127 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
128 (insert_jhint): Fix insertion mask.
129 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
131 1999-02-10 Doug Evans <devans@casey.cygnus.com>
133 * Makefile.in: Rebuild.
135 1999-02-09 Doug Evans <devans@casey.cygnus.com>
137 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
138 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
139 * Makefile.am: Remove references to them.
140 (HFILES): Add fr30-desc.h,m32r-desc.h.
141 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
143 (ALL_MACHINES): Update.
144 * configure.in: Redo handling of cgen_files.
145 (bfd_i960_arch): Delete i960c-*.lo files.
146 * configure: Regenerate.
147 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
148 (hash_insn_array): Rewrite.
149 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
150 (hash_insn_array): Rewrite.
151 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
152 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
153 (cgen_lookup_get_insn_operands): Ditto.
154 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
155 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
156 * po/POTFILES.in: Rebuild.
157 * po/opcodes.pot: Rebuild.
159 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
161 * Makefile.am: Rebuild dependencies.
162 (HFILES): Add fr30-opc.h.
163 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
164 * Makefile.in: Rebuild.
166 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
167 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
169 * acconfig.h: Remove.
170 * configure: Rebuild with current autoconf/automake.
171 * aclocal.m4: Likewise.
172 * config.in: Likewise.
173 * Makefile.in: Likewise.
175 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
177 * m68k-opc.c: Correct move (not movew) to status word on 5200.
179 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
181 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
182 * i386-dis.c (x_mode): Define.
186 (dis386_twobyte): Remove.
187 (dis386_twobyte_att): New.
188 (dis386_twobyte_intel): New.
189 (print_insn_x86): Use new arrays.
191 (float_mem_intel): New.
192 (float_mem_att): New.
193 (dofloat): Use new float_mem arrays.
194 (print_insn_i386_att): New.
195 (print_insn_i386_intel): New.
196 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
197 (putop): Handle intel syntax.
198 (OP_indirE): Handle intel syntax.
199 (OP_E): Handle intel syntax.
200 (OP_I): Handle intel syntax.
201 (OP_sI): Handle intel syntax.
202 (OP_OFF): Handle intel syntax.
206 1999-01-27 Doug Evans <devans@casey.cygnus.com>
208 * fr30-opc.h,fr30-opc.c: Rebuild.
209 * i960c-opc.h,i960c-opc.c: Rebuild.
210 * m32r-opc.c: Rebuild.
212 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
214 * hppa-dis.c: revert HP merge changes until HP gives us
217 1999-01-19 Nick Clifton <nickc@cygnus.com>
219 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
220 offsets as well as symbloic address.
222 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
224 * hppa-dis.c: fix comments and some indentation.
226 1999-01-12 Doug Evans <devans@casey.cygnus.com>
228 * fr30-opc.c,i960c-opc.c: Regenerate.
230 1999-01-11 Doug Evans <devans@casey.cygnus.com>
232 * fr30-opc.c: Regenerate.
234 1999-01-06 Doug Evans <devans@casey.cygnus.com>
236 * m32r-dis.c: Regenerate.
238 1999-01-05 Doug Evans <devans@casey.cygnus.com>
240 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
241 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
242 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
244 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
246 * configure.in: Require autoconf 2.12.1 or higher.
248 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
250 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
252 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
254 * fr30-opc.c: Regenerated.
256 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
258 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
260 1998-12-15 Dave Brolley <brolley@cygnus.com>
262 * fr30-opc.c,fr30-opc.h: Regenerated.
264 1998-12-14 Dave Brolley <brolley@cygnus.com>
266 * fr30-opc.c,fr30-opc.h: Regenerated.
268 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
270 * fr30-opc.c,fr30-opc.h: Regenerated.
272 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
274 * m32r-opc.c: Regenerate.
276 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
278 * dis-buf.c (generic_strcat_address): reformat to GNU coding
279 conventions. change sprintf call to an sprintf_vma call.
281 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
283 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
285 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
287 The following changes were made by
288 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
289 David Taylor <taylor@texas.cygnus.com>, and
290 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
291 merge in changes by HP; HP did not create ChangeLog entries.
293 * dis-buf.c (generic_strcat_address): new function.
295 * hppa-dis.c: Changes to improve hppa disassembly.
296 Changed formatting in : reg_names, fp_reg_names,control_reg,
297 New variables : sign_extension_names, deposit_names, conversion_names
298 float_test_names, compare_cond_names_double, add_cond_names_double,
299 logical_cond_names_double, unit_cond_names_double,
300 branch_push_pop_names, saturation_names, shift_names, mix_names,
301 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
302 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
303 (fput_const): renamed as fput_hex_const
305 - use the macros fputs_filtered and
306 fput_decimal_const whenever possible; calls to sign_extend require
307 2 params -- add a missing second param of 0.
308 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
309 architecture version number of current machine. HP folks are
310 trying to handle situation where the target program was compiled
311 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
313 - added new cases : 'g', 'B', 'm'
314 - added cases specifically for PA 2.0
315 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
316 - calls to fput_const become calls to fput_hex_const
318 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
320 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
321 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
322 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
323 * Makefile.in: Rebuilt.
324 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
326 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
327 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
329 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
331 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
333 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
335 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
337 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
338 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
340 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
342 * fr30-opc.c: Regenerate.
344 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
346 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
348 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
350 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
352 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
354 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
356 1998-11-30 Doug Evans <devans@casey.cygnus.com>
358 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
359 CGEN_INSN_BASE_VALUE.
360 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
361 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
363 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
365 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
367 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
369 * fr30-asm.c,fr30-dis.c: Regenerated.
371 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
373 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
375 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
377 * fr30-opc.c: Regenerated.
379 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
381 * fr30-opc.c: Regenerated.
382 * fr30-opc.h: Regenerated.
383 * fr30-dis.c: Regenerated.
384 * fr30-asm.c: Regenerated.
386 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
388 * mips-opc.c (sync.p,sync.l): Swap insn values.
390 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
392 * fr30-opc.c: Regenerate.
394 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
396 * fr30-opc.c: Regenerated.
397 * fr30-opc.h: Regenerated.
399 1998-11-18 Doug Evans <devans@casey.cygnus.com>
401 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
402 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
404 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
406 * fr30-opc.c: Regenerated.
408 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
410 * fr30-opc.c: Regenerated.
411 * fr30-opc.h: Regenerated.
412 * fr30-dis.c: Regenerated.
413 * fr30-asm.c: Regenerated.
415 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
417 * po/opcodes.pot: Regenerated.
418 * fr30-opc.c: Regenerated.
419 * fr30-opc.h: Regenerated.
420 * fr30-dis.c: Regenerated.
421 * fr30-asm.c: Regenerated.
423 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
425 * disassemble.c (disassembler): Add support for FR30 target.
427 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
429 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
430 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
432 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
434 * po/opcodes.pot: Regenerate.
435 * po/POTFILES.in: Regenerate.
436 * fr30-opc.c: Regenerate.
437 * fr30-opc.h: Regenerate.
439 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
441 * m32r-asm.c: Regenerate.
443 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
445 * configure.in: Added case for bfd_fr30_arch.
446 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
447 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
448 (CLEANFILES): Added stamp-fr30.
450 * fr30-asm.c: New file.
451 * fr30-dis.c: New file.
452 * fr30-opc.c: New file.
453 * fr30-opc.h: New file.
454 * po/POTFILES.in: Regenerated
455 * po/opcodes.pot: Regenerated
457 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
459 * configure.in: detect cygwin* instead of cygwin32*
460 * configure: regenerate
462 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
464 * mips-opc.c (IS_M): Added.
466 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
468 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
470 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
472 * m32r-opc.h,m32r-opc.c: Regenerate.
474 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
476 * i386-dis.c (OP_3DNowSuffix): New static function.
479 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
480 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
481 (insn_codep): New static variable.
482 (print_insn_x86): Init insn_codep after prefixes.
483 (grps): Add GRP14 entries for prefetch, prefetchw.
486 From Jeff B Epler <jepler@usgs.gov>
487 * i386-dis.c (Suffix3DNow): New table.
489 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
491 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
493 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
495 * d10v-dis.c (print_operand): If num is nonzero, then
496 add OPERAND_ACC1, not OPERAND_ACC0.
498 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
500 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
503 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
505 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
508 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
510 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
512 1998-09-09 Michael Meissner <meissner@cygnus.com>
514 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
517 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
519 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
521 (print_insn_little_arm): Detect Thumb symbols in elf object
524 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
526 * alpha-dis.c (print_insn_alpha): Use the machine type to
527 decide which PALcode set to include.
529 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
531 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
533 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
535 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
536 MSUB and MSUBS instructions.
538 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
540 * ppc-opc.c (powerpc_operands): Omit parens around additions in
543 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
545 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
546 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
547 +, -, and d for ColdFire.
549 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
550 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
551 (extract_mbe): Likewise.
553 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
555 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
557 * m10300-opc.c: First cut at UDF instructions.
559 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
561 * m32r-opc.c: Regenerate (remove semantic descriptions).
563 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
565 * arm-dis.c (print_insn_big_arm): Fix indentation.
566 (print_insn_little_arm): Likewise.
568 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
570 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
572 (print_insn_little_arm): Likewise.
574 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
576 Move all global state data into opcode table struct, and treat
577 opcode table as something that is "opened/closed".
578 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
579 (cgen_asm_init): Delete.
580 (cgen_set_parse_operand_fn): New function.
581 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
582 (cgen_dis_init): Delete.
583 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
584 (cgen_current_{opcode_table_mach,endian}): Delete.
585 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
587 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
589 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
592 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
594 * m10300-opc.c: Add entries for "no_match_operands" field in
597 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
599 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
601 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
603 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
605 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
607 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
609 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
611 (OP_J): Remove unnecessary subtraction when 16-bit displacement
612 will be masked later.
614 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
616 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
618 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
620 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
622 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
624 * m10300-dis.c: Only recognize instructions from the currently
626 * m10300-opc.c: Add field indicating the particular variant of
627 the mn10300 each instruction is available on.
629 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
631 * configure.in: For bfd_vax_arch, build vax-dis.lo.
632 * Makefile.am: Rebuild dependencies.
633 (CFILES): Add vax-dis.c.
634 (ALL_MACHINES): Add vax-dis.lo.
635 * aclocal.m4: Rebuild with current libtool.
636 * configure, Makefile.in: Rebuild.
638 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
640 * vax-dis.c: New file, from work by Pauline Middelink
641 <middelin@polyware.iaf.nl>.
642 * disassemble.c (ARCH_vax): Define if ARCH_all.
643 (disassembler): Add case for ARCH_vax.
644 * makefile.vms: Support compilation on vms/vax.
646 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
648 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
649 related to sign extension and the size of ints.
651 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
653 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
654 instructions. Support (sp) addressing mode by expanding it into
657 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
659 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
661 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
663 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
665 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
667 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
670 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
672 * mips-dis.c (print_insn_little_mips): Previously, instruction
673 printing references the symbol table to determine whether the
674 instruction resides in a block regular instructions or mips16
675 instructions. However, when the disassembler gets used in other
676 environments where the symbol table is not present, we no longer
677 rely in the symbol table, rather, use the low bit of the
678 instructions address to guess. There should be no change for usage
679 of the disassembler in host based programs, gdb, objdump.
680 (print_insn_big_mips): ditto.
681 (print_insn_mips): ditto
683 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
685 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
687 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
689 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
691 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
693 * i386-dis.c (index16): Add '%' to register names. Use ','
696 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
698 * i386-dis.c: Don't print opcode suffix when we can figure out the
699 size (and gas can!) by register operands, or from the default
701 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
703 (dis386, dis386_twobyte, grps): Use new suffix macros.
704 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
705 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
706 order of cmps operands to agree with Intel docs. Correct operand
707 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
708 agree with Intel docs.
709 (print_insn_x86): Print orphan fwait before other prefixes.
710 Return correct byte count for orphan fwait with prefixes. Don't
711 print `bound' operands in reverse order.
712 (ckprefix): Stop accumulating prefixes if we get fwait.
713 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
715 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
717 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
718 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
720 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
722 Fix problems when bfd_vma is wider than long.
723 * i386-dis.c: Make op_address and start_pc unsigned.
724 (set_op): Make parameter unsigned.
725 (print_insn_x86): Cast to bfd_vma when passing a value to
727 * ns32k-dis.c (CORE_ADDR): Don't define.
728 (print_insn_ns32k): Change type of addr to bfd_vma. Use
729 bfd_scan_vma to read back address.
730 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
732 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
733 (NEXTULONG): New definition.
734 (print_insn_m68k): Avoid overflow when computing third argument of
736 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
737 Use disp instead of val to store offset values.
738 (print_indexed): Use base_disp instead of word to store base
739 displacement, to avoid overflow.
740 * m10300-dis.c (disassemble): Cast value to long when computing
741 pc-relative address, to get correct sign extension.
743 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
745 * m32r-opc.c: Regenerate.
747 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
749 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
750 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
752 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
754 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
756 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
758 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
760 (OP_DSreg): Rename from OP_DSSI.
761 (OP_ESreg): Rename from OP_ESDI.
762 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
764 (append_seg): Rename from append_prefix.
765 (ptr_reg): New function.
766 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
768 (PREFIX_ADDR): Rename from PREFIX_ADR.
769 (float_reg): Add non-broken opcodes for people who don't want
772 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
774 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
777 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
779 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
781 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
783 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
784 0; produce error message for shifts of size 32 (or 64 for 64-bit
785 shifts), because the hardware doesn't support them.
787 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
789 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
790 LONG_2, LONG_2b formats to use this new operand.
792 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
794 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
796 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
798 * sparc-dis.c (print_insn_sparc): big endian instruction / little
801 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
803 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
804 and SHORT_B3b formats to use Rb instead of Ra.
806 Add FLAG_MUL16 to MUL2XH opcode.
808 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
809 to existing 1.1.1 parallelisation prohibition procedure.
811 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
813 * m32r-asm.c,m32r-dis.c: Regenerate.
815 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
817 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
818 with a shift count of 0.
820 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
822 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
823 (cgen_hw_lookup_by_num): New function.
825 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
827 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
829 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
831 * sparc-dis.c (print_insn_sparc): Always fetch instructions
832 as big-endian on SPARClite.
834 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
836 * d30v-opc.c (pre_defined_register): Remove alias for r0.
838 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
840 * po/Make-in (install-info): New target.
842 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
844 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
845 * configure: Rebuild.
847 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
849 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
850 variety of ISA2 instructions to set bottom ten bits of trap code.
852 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
854 * Makefile.am (config.status): Add explicit target so that
855 config.status depends upon bfd/configure.in.
856 * Makefile.in: Rebuild.
858 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
860 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
861 instructions to set bottom ten bits of break code.
862 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
863 for above optional argument.
865 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
867 * makefile.vms: Run dec c with /nodebug.
869 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
871 * Makefile.in: Rebuilt.
872 * Makefile.am: Regenerated dependencies with mkdep.
874 * opintl.h (_): Define as dgettext.
876 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
878 * cgen-asm.c: Internationalised.
879 * m32r-asm.c: Internationalised.
880 * m32r-dis.c: Internationalised.
881 * m32r-opc.c: Internationalised.
883 * aclocal.m4: Regenerated.
884 * configure: Regenerated.
885 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
886 * Makefile.in: Rebuild.
887 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
888 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
890 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
892 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
894 * aclocal.m4, configure: Rebuild with current tools.
896 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
898 * opintl.h: New file - contains internationalisation macros used
899 by source files in this directory.
900 * po/: New subdirectory - contains internationalisation files.
901 * po/Make-in: New file - Makefile constructor.
902 * po/POTFILES.in: New file - list of files in opcodes directory
903 that should be scan for internationalisation macros.
904 * po/opcodes.pot: New file - list of internationisation strings
905 found in files mentioned in po/POTFILES.in.
906 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
907 entry. Add intl directory to include paths.
908 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
909 HAVE_STRCPY, HAVE_LC_MESSAGES
910 * configure.in: Add rule to build Makefile in po subdirectory.
911 * Makefile.in: Rebuilt.
912 * aclocal.m4: Rebuilt.
913 * config.in: Rebuilt.
914 * configure: Rebuilt.
915 * alpha-opc.c: Internationalised.
916 * arc-dis.c: Internationalised.
917 * arc-opc.c: Internationalised.
918 * arm-dis.c: Internationalised.
919 * cgen-asm.c: Internationalised.
920 * d30v-dis.c: Internationalised.
921 * dis-buf.c: Internationalised.
922 * h8300-dis.c: Internationalised.
923 * h8500-dis.c: Internationalised.
924 * i386-dis.c: Internationalised.
925 * m10200-dis.c: Internationalised.
926 * m10300-dis.c: Internationalised.
927 * m68k-dis.c: Internationalised.
928 * m88k-dis.c: Internationalised.
929 * mips-dis.c: Internationalised.
930 * ns32k-dis.c: Internationalised.
931 * opintl.h: Internationalised.
932 * ppc-opc.c: Internationalised.
933 * sparc-dis.c: Internationalised.
934 * v850-dis.c: Internationalised.
935 * v850-opc.c: Internationalised.
937 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
939 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
940 (asm_hash_table_entries): New variable.
941 (cgen_asm_init): Free asm_hash_table_entries.
942 (hash_insn_array,hash_insn_list): New functions.
943 (build_asm_hash_table): Use them. Hash macro insns as well.
944 (cgen_asm_lookup_insn): Update.
945 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
946 (dis_hash_table_entries): New variable.
947 (cgen_dis_init): Free dis_hash_table_entries.
948 (hash_insn_array,hash_insn_list): New functions.
949 (build_dis_hash_table): Use them. Hash macro insns as well.
950 (cgen_dis_lookup_insn): Update.
951 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
952 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
953 (cgen_macro_insn_count): New function.
954 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
956 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
958 * i386-dis.c (OP_DSSI): Print segment override.
960 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
962 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
965 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
967 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
968 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
969 * configure.in: Define and substitute WIN32LDFLAGS and
971 * aclocal.m4: Rebuild with new libtool.
972 * configure, Makefile.in: Rebuild.
974 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
976 * m32r-opc.c: Regenerate.
978 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
980 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
981 before trying to copy it.
982 * Makefile.in: Rebuild.
984 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
986 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
988 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
990 * ns32k-dis.c (bit_extract_simple): New function to extract bits
991 from an arbitrary valid buffer instead of fetching them on demand
993 (invalid_float): use bit_extract_simple() instead of bit_extract().
995 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
997 From H.J. Lu <hjl@gnu.org>:
998 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1001 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1003 * Branched binutils 2.9.
1005 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1007 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1008 disassembling last 4 bytes of a section.
1010 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1012 Fix some gcc -Wall warnings:
1013 * arc-dis.c (print_insn): Add casts to avoid warnings.
1014 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1015 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1016 * m10200-dis.c (disassemble): Likewise.
1017 * m10300-dis.c (disassemble): Likewise.
1018 * ns32k-dis.c (print_insn_ns32k): Likewise.
1019 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1020 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1021 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1022 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1023 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1024 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1025 * tic80-dis.c (print_one_instruction): Likewise.
1026 * w65-dis.c (print_operand): Likewise.
1027 * z8k-dis.c (fetch_data): Likewise.
1028 * a29k-dis.c: Add return type for find_byte_func_type.
1029 * arc-opc.c: Include <stdio.h>. Remove declarations of
1030 insert_multshift and extract_multshift.
1031 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1033 (extract_value): Fully parenthesize expression.
1034 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1035 * h8500-opc.h (h8500_table): Fully bracket initializer.
1036 * w65-opc.h (optable): Likewise.
1037 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1038 * i386-dis.c (OP_E): Initialize local variables.
1039 * m10200-dis.c (print_insn_mn10200): Likewise.
1040 * mips-dis.c (print_insn_mips16): Likewise.
1041 * sh-dis.c (print_insn_shx): Likewise.
1042 * v850-dis.c (print_insn_v850): Likewise.
1043 * ns32k-dis.c (print_insn_arg): Declare.
1044 (get_displacement, invalid_float): Declare.
1045 (list_search, sign_extend, flip_bytes): Declare return type.
1046 (get_displacement): Likewise.
1047 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1049 (print_insn_ns32k): Make i unsigned.
1050 (invalid_float): Make static. Declare type of val.
1051 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1052 on each for iteration.
1053 * tic30-dis.c (get_indirect_operand): Likewise.
1054 * z8k-dis.c (print_insn_z8001): Declare return type.
1055 (print_insn_z8002): Likewise.
1056 (unparse_instr): Fix sprintf format strings.
1058 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1060 * mips-opc.c: Add "sync.l" and "sync.p".
1062 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1064 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1065 default m68k variant to recognize.
1067 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1068 (ctrl, cobr, mem, ea): Likewise.
1069 (print_addr): Likewise. Remove cast.
1070 (ea): Cast argument of print_addr to bfd_vma.
1072 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1074 (cgen_parse_unsigned_integer): Likewise.
1075 (cgen_parse_address): Likewise.
1077 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1079 * i960-dis.c (ctrl): Add full braces to structure initialization.
1080 (cobr, mem, reg): Likewise.
1081 (ea): Correct parenthesization in expression.
1083 * cgen-asm.c: Include <ctype.h>.
1084 (build_asm_hash_table): Remove unused local variable i.
1085 (cgen_parse_keyword): Add casts to avoid warnings.
1087 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1088 symbol. Fix indentation.
1089 (print_insn_little_arm): Likewise.
1091 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1093 * configure.in: Use AM_DISABLE_SHARED.
1094 * aclocal.m4, configure: Rebuild with libtool 1.2.
1096 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1098 These patches are courtesy of Jonathan Walton and Tony Thompson
1099 (athompso@cambridge.arm.com).
1101 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1104 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1105 both the offset and the label closest to the destination.
1107 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1109 * m32r-opc.h: Regenerate.
1111 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1113 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1115 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1117 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1118 assume that info->symbols is non-empty.
1120 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1122 * alpha-opc.c (cvtqs) There is no such thing.
1123 (cvttq): Missing most of the /*d variants.
1125 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1127 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1128 delayed branches or jumps.
1130 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1132 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1134 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1135 * tic30-dis.c (print_branch): Likewise.
1137 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1139 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1140 saved_symbol code as it is no longer needed.
1142 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1144 * cgen-asm.c: Include symcat.h.
1145 * cgen-dis.c,cgen-opc.c: Ditto.
1146 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1148 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1150 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1152 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1154 * m32r-opc.[ch]: Regenerate.
1156 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1158 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1159 arguments. Don't perform validation here.
1160 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1162 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1164 * m32r-opc.c: Regenerate.
1166 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1168 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1169 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1171 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1173 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1175 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1177 * configure.in: Get the version number from BFD.
1178 * configure: Rebuild.
1180 From H.J. Lu <hjl@gnu.org>:
1181 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1182 * Makefile.in: Rebuild.
1184 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1186 * m32r-opc.c: Regenerate.
1187 * m32r-opc.h: Regenerate.
1189 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1191 * m32r-opc.c: Regenerate.
1193 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1195 Fix rac to accept only a0:
1196 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1197 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1198 Introduce OPERAND_GPR.
1199 * d10v-dis.c (print_operand): Likewise.
1201 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1203 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1204 (cgen_hw_lookup): Make result const.
1205 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1207 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1209 * configure, aclocal.m4: Rebuild with new libtool.
1211 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1213 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1214 instructions use a PC relative branch, not absolute.
1216 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1218 * configure.in: Set libtool_enable_shared rather than
1219 libtool_shared. Remove diversion hack.
1220 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1222 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1224 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1225 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1227 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1229 * tic30-dis.c: New file.
1230 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1231 * configure.in: Handle bfd_tic30_arch.
1232 * Makefile.am: Rebuild dependencies.
1233 (CFILES): Add tic30-dis.c
1234 (ALL_MACHINES): Add tic30-dis.lo.
1235 * configure, Makefile.in: Rebuild.
1237 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1239 * m32r-opc.h (HAVE_CPU_M32R): Define.
1241 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1243 * v850-opc.c (insertion routines): If both alignment and size is
1244 wrong then report this.
1246 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1248 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1249 Only recognize instructions for the current target_processor.
1251 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1253 * d10v-dis.c (PC_MASK): Correct value.
1254 (print_operand): If there's a reloc, don't calculate the
1255 address because they could be in different sections.
1257 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1259 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1260 instruction after the 4650's "mul" instruction; nobody's using the
1261 4010 these days. If object files someday indicate which processor
1262 variant they're intended for, we can do a better job at this.
1264 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1266 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1267 table provided entry size. Use CGEN_INSN_MNEMONIC.
1268 (cgen_parse_keyword): Rewrite.
1269 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1270 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1271 * cgen-opc.c: Clean up pass over `struct foo' usage.
1272 (cgen_keyword_lookup_value): Handle "" entry.
1273 (cgen_keyword_add): Likewise.
1275 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1277 * mips-opc.c: Add FP_D to s.d instruction flags.
1279 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1281 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1283 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1285 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1286 PC relative offset forms before the 15 bit forms. An assembler command
1287 line option now chooses the default.
1289 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1291 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1292 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1294 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1296 * configure: Only build libopcodes shared if --enable-shared's value
1297 was `yes', or was set to `*opcodes*'.
1298 * aclocal.m4: Likewise.
1299 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1300 original source of this bit of code. It's not clear what the best fix
1303 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1305 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1306 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1307 offset forms before the 15 bit forms, to default to the long forms.
1309 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1311 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1313 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1315 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1316 symbol if none is present.
1317 (print_insn_big_arm): Prevent examination of stored symbol if
1320 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1322 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1324 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1326 * disassemble.c: Remove disasm_symaddr() function.
1328 * arm-dis.c: Use info->symbol instead of info->flags to determine
1329 if disassmbly should be in Thumb or Arm mode.
1331 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1333 * arm-dis.c: Add support for disassembling Thumb opcodes.
1334 (print_insn_thumb): New function.
1336 * disassemble.c (disasm_symaddr): New function.
1338 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1339 (thumb_opcodes): Table of Thumb opcodes.
1341 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1343 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1345 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1346 and 'v' as operand types.
1348 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1350 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1351 <olivier.carmona@di.epfl.ch>.
1352 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1353 which has a two word opcode with a one word argument.
1355 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1357 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1358 unsigned, not signed.
1359 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1361 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1363 * d10v-dis.c (print_operand):
1364 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1366 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1368 * d10v-opc.c (OPERAND_FLAG): Split into:
1369 (OPERAND_FFLAG, OPERAND_CFLAG) .
1373 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1375 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1376 field for all INSN_MACRO's.
1377 * mips16-opc.c: same
1379 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1381 * mips-opc.c (sync,cache): These are 3900 insns.
1383 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1385 sh-opc.h (sh_table): Remove ftst/nan.
1387 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1389 * mips-opc.c (ffc, ffs): Fix mask.
1391 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1393 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1396 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1398 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1399 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1401 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1403 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1404 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1406 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1408 * v850-dis.c (disassemble): Replace // with /* ... */
1410 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1412 * sparc-opc.c: Add wr & rd for v9a asr's.
1413 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1414 (v9a_asr_reg_names): New variable.
1415 Patch from David Miller <davem@vger.rutgers.edu>.
1417 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1419 * sparc-opc.c (v9notv9a): New insn type.
1420 (IMPDEP): Move to the end to not conflict with edge8 et al.
1421 Patch from David Miller <davem@vger.rutgers.edu>.
1423 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1425 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1427 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1429 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1431 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1433 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1434 of disassemble_info structure to determine if an overlay address
1435 has a matching symbol in low memory.
1437 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1438 new symbol_at_address_func field in disassemble_info structure.
1440 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1442 * v850-opc.c (extract_d22): Use signed arithmatic.
1444 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1446 * mips-opc.c: Three op mult is not an ISA insn.
1448 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1450 * mips-opc.c: Fix formatting.
1452 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1454 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1455 than assuming that char is signed. Explicitly sign extend 16 bit
1456 values, rather than assuming that short is 16 bits.
1457 (OP_sI, OP_J, OP_DIR): Likewise.
1459 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1461 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1464 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1466 * v850-opc.c: Fix typo in comment.
1468 * v850-dis.c (disassemble): Add test of processor type when
1469 determining opcodes.
1471 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1473 * configure.in: Use a diversion to set enable_shared before the
1474 arguments are parsed.
1475 * configure: Rebuild.
1477 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1479 * m68k-opc.c (TBL1): Use ! rather than `.
1480 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1482 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1484 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1486 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1488 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1491 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1492 * aclocal.m4: Rebuild with new libtool.
1493 * configure: Rebuild.
1495 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1497 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1499 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1501 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1503 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1505 * v850-opc.c (v850_opcodes): Further rearrangements.
1507 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1509 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1511 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1513 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1516 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1518 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1520 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1522 * v850-opc.c: Initialise processors field of v850_opcode structure.
1524 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1526 Merge changes from Martin Hunt:
1528 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1530 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1531 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1532 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1534 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1536 * d30v-dis.c (print_insn): First operand of d*i (delayed
1537 branch) instructions is relative.
1539 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1540 (d30v_operand_table): Add IMM6S3 type.
1541 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1543 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1544 and cmp instructions.
1546 * d30v-opc.c: Correct entries for repeat*, and sat*.
1547 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1548 types. Correct several formats.
1550 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1552 * d30v-opc.c (pre_defined_registers): Change control registers.
1554 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1555 SHORT_C2. Manual was incorrect.
1557 * d30v-dis.c (lookup_opcode): Return value now indicates
1558 if an opcode has a short and a long form. Used for deciding
1559 to append a ".s" or ".l".
1560 (print_insn): Append a ".s" to an instruction if it is
1561 the short form and ".l" if it is a long form. Do not append
1562 anything if the instruction has only one possible size.
1564 * d30v-opc.c: Change mulx2h to require an even register.
1565 New form: SHORT_A2; a SHORT_A form that needs an even
1566 register as the first operand.
1568 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1569 instruction was not being disassembled if there were an odd
1570 number of instructions.
1572 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1574 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1576 * v850-dis.c (disassemble): Improved display of register lists.
1578 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1580 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1581 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1582 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1583 fandnot1s, fandnot2s.
1585 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1587 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1589 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1591 * cgen-asm.c (cgen_parse_address): New argument resultp.
1592 All callers updated.
1593 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1595 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1597 * mn10200-dis.c (disassemble): PC relative instructions are
1598 relative to the next instruction, not the current instruction.
1600 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1602 * v850-dis.c (disassemble): Only signed extend values that are not
1603 returned by extract functions.
1604 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1606 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1608 * v850-opc.c: Update comments. Remove use of
1609 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1611 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1613 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1615 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1617 * configure: Rebuilt with latest devo autoconf for NT support.
1619 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1621 * v850-dis.c (disassemble): Use curly brace syntax for register
1624 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1625 where r0 is being used as a destination register.
1627 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1629 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1631 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1633 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1635 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1637 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1638 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1641 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1643 * configure (cgen_files): Add support for v850e target.
1644 * configure.in (cgen_files): Add support for v850e target.
1646 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1648 * configure (cgen_files): Add support for v850ea target.
1649 * configure.in (cgen_files): Add support for v850ea target.
1651 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1653 * configure.in (bfd_arc_arch): Add.
1654 * configure: Rebuild.
1655 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1656 * Makefile.in: Rebuild.
1657 * arc-dis.c, arc-opc.c: New files.
1658 * disassemble.c (ARCH_all): Define ARCH_arc.
1659 (disassembler): Add ARC support.
1661 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1663 * v850-dis.c (disassemble): Add support for v850EA instructions.
1665 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1666 (v850_opcodes): Add v850EA instructions.
1668 * v850-dis.c (disassemble): Add support for v850E instructions.
1670 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1671 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1672 insert_spe, extract_spe): New Functions.
1673 (v850_opcodes): Add v850E instructions.
1675 * v850-opc.c: Reorganised and re-layed out to improve readability
1678 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1680 * configure: Rebuild with autoconf 2.12.1.
1682 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1684 * aclocal.m4, configure: Rebuild with new automake patches.
1686 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1688 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1689 * acinclude.m4: Just include acinclude.m4 from BFD.
1690 * aclocal.m4, configure: Rebuild.
1692 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1694 * Makefile.am: New file, based on old Makefile.in.
1695 * acconfig.h: New file.
1696 * acinclude.m4: New file.
1697 * stamp-h.in: New file.
1698 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1699 Removed shared library handling; now handled by libtool. Replace
1700 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1701 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1702 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1703 handling in AC_OUTPUT.
1704 * dep-in.sed: Change .o to .lo.
1705 * Makefile.in: Now built with automake.
1706 * aclocal.m4: Now built with aclocal.
1707 * config.in, configure: Rebuild.
1709 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1711 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1713 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1715 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1717 * sparc-dis.c (sorted_opcodes): New static local.
1718 (struct opcode_hash): `opcode' is pointer to const element.
1719 (build_hash): First arg is now table of sorted pointers.
1720 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1721 (compare_opcodes): Update.
1723 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1725 * cgen-opc.c: #include <ctype.h>.
1726 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1727 Handle case insensitive hashing.
1728 (hash_keyword_value): Change type of `value' to unsigned int.
1730 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1732 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1733 precision FP, mark it as such. Likewise for double precision
1734 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1737 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1739 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1741 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1742 nesting depth when all the macros are expanded.
1744 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * sparc-opc.c: The fcmp v9a instructions take an integer register
1747 as a destination, not a floating point register. From Christian
1748 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1750 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1752 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1753 syntax. From Roman Hodek
1754 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1756 * i386-dis.c (twobyte_has_modrm): Fix pand.
1758 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1760 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1762 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1764 * arm-dis.c: Add prototypes for arm_decode_shift and
1767 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1769 * mips-opc.c: Add r3900 insns.
1771 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1773 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1774 print delay slot instructions on the same line. When using a PC
1775 relative load, add a comment with the value being loaded if it can
1778 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1780 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1781 to pushS/popS for segment regs and byte constant so that
1782 pushw/popw printed when in 16 bit data mode.
1784 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1785 print cbtw, cwtd in 16 bit data mode.
1786 * i386-dis.c (putop): extra case W to support above.
1788 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1789 address size prefix in 16 bit address mode.
1791 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1793 * sh-dis.c: Reindent. Rename local variable fprintf to
1796 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1798 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1800 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1802 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1804 * mips16-opc.c (mip16_opcodes): same.
1806 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1808 * m68k-opc.c (moveb): Change $d to %d.
1810 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1813 (twobyte_has_modrm): Likewise.
1815 (OP_MMX, OP_EM, OP_MS): New static functions.
1817 * i386-dis.c: Revert patch of April 4. The output now matches
1820 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1822 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1825 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1827 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1829 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1831 * Makefile.in (install): Depend upon installdirs.
1832 (installdirs): New target.
1834 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1836 From Thomas Graichen <graichen@rzpd.de>:
1837 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1838 * configure: Rebuild.
1840 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1842 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1843 Delete string{,s}.h support.
1845 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1847 * cgen-asm.c (cgen_parse_operand_fn): New global.
1848 (cgen_parse_{{,un}signed_integer,address}): Update call to
1849 cgen_parse_operand_fn.
1850 (cgen_init_parse_operand): New function.
1851 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1852 from cgen_asm_init_parse.
1853 (m32r_cgen_assemble_insn): New operand `errmsg'.
1854 Delete call to as_bad, return error message to caller.
1855 (m32r_cgen_asm_hash_keywords): #if 0 out.
1857 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1859 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1861 [case 'J']: Fix typo in register name.
1863 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1865 * configure.in: Substitute SHLIB_LIBS.
1866 * configure: Rebuild.
1867 * Makefile.in (SHLIB_LIBS): New variable.
1868 ($(SHLIB)): Use $(SHLIB_LIBS).
1870 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1872 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1874 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1876 * disassemble.c (disassembler): Handle m32r.
1878 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1880 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1881 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1882 * Makefile.in (CFILES): Add them.
1883 (ALL_MACHINES): Add them.
1884 (dependencies): Regenerate.
1885 * configure.in (cgen_files): New variable.
1886 (bfd_m32r_arch): Add entry.
1887 * configure: Regenerate.
1889 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1891 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1892 * configure: Rebuild.
1894 * Makefile.in: Rebuild dependencies.
1896 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1898 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1901 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * Branched binutils 2.8.
1905 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1907 * m10200-dis.c: Rename from mn10200-dis.c.
1908 * m10200-opc.c: Rename from mn10200-opc.c.
1909 * m10300-dis.c: Rename from mn10300-dis.c
1910 * m10300-opc.c: Rename from mn10300-opc.c.
1911 * Makefile.in: Update accordingly.
1913 * mips16-opc.c: Add mul and dmul macros.
1915 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1917 * makefile.vms: Update CFLAGS, add clean target.
1919 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1921 * mips-opc.c: Add "wait". From Ralf Baechle
1922 <ralf@gnu.ai.mit.edu>.
1924 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1925 * configure, config.in: Rebuild.
1926 * sysdep.h: Include <stdlib.h> if it exists.
1927 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1929 * Makefile.in: Rebuild dependencies.
1931 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1933 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
1934 Andrew Bray <andy@madhouse.demon.co.uk>.
1936 * mips-opc.c: Add cast when setting mips_opcodes.
1938 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
1940 * v850-dis.c (disassemble): Fix sign extension problem.
1941 * v850-opc.c (extract_d*): Fix sign extension problems to make
1942 disassembly calculate branch offsets correctly.
1944 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
1946 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
1948 * mips-opc.c: Add dctr and dctw.
1950 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
1952 * d30v-dis.c (print_insn): Change the way signed constants
1955 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
1957 * Makefile.in (BFD_H): New variable.
1958 (HFILES): New variable.
1959 (CFILES): Add all C files.
1960 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
1961 Delete old dependencies, and build new ones.
1962 * dep-in.sed: New file.
1964 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
1966 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
1968 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
1970 * mn10200-opc.c: Change "trap" to "syscall".
1971 * mn10300-opc.c: Add new "syscall" instruction.
1973 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
1975 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
1976 mulul insns on the coldfire.
1978 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
1980 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
1981 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
1982 (print_insn_little_arm): Likewise.
1984 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
1986 Based on patches from H.J. Lu <hjl@lucon.org>:
1987 * i386-dis.c (fetch_data): Add prototype.
1988 * m68k-dis.c (fetch_data): Add prototype.
1989 (dummy_print_address): Add prototype. Make static.
1990 * ppc-opc.c (valid_bo): Add prototype.
1991 * sparc-dis.c (build_hash_table): Add prototype.
1992 (is_delayed_branch, compute_arch_mask): Add prototypes.
1993 (print_insn_sparc): Make several local variables const.
1994 (compare_opcodes): Change arguments to const PTR. Add prototype.
1995 * sparc-opc.c (arg): Change name field to be const.
1996 (lookup_name, lookup_value): Add prototypes. Change table and
1997 name parameters to be const.
1998 (sparc_encode_asi): Change name parameter to be const.
1999 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2000 (sparc_encode_sparclet_cpreg): Likewise.
2001 (sparc_decode_asi): Change return type to be const.
2002 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2003 (sparc_decode_sparclet_cpreg): Likewise.
2005 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2007 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2008 Solaris doesn't like the combined options, and the -f is
2010 (stamp-tshlink, install): Likewise.
2012 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2014 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2017 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2019 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2021 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2023 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2026 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2028 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2030 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2032 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2034 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2036 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2038 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2040 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2041 floatformat_to_double to make portable.
2042 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2045 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2047 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2048 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2050 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2052 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2053 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2055 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2057 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2058 (OFF_SL_BR_SCALED): ... to this, and added the flag
2059 TIC80_OPERAND_BASEREL to the flags word.
2060 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2063 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2065 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2066 Change mips_opcodes from const array to a pointer,
2067 and change bfd_mips_num_opcodes from const int to int,
2068 so that we can increase the size of the mips opcodes table
2071 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2073 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2074 store BITNUM values in the table in one's complement form
2075 to match behavior when assembler is given a raw numeric
2076 value for a BITNUM operand.
2077 * tic80-dis.c (print_operand_bitnum): Ditto.
2079 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2081 * d30v-opc.c: Removed references to FLAG_X.
2083 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2085 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2087 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2089 * Makefile.in: Added d30v object files.
2090 * configure: (bfd_d30v_arch) Rebuilt.
2091 * configure.in: (bfd_d30v_arch) Added new case.
2092 * d30v-dis.c: New file.
2093 * d30v-opc.c: New file.
2094 * disassemble.c (disassembler) Add entry for d30v.
2096 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2098 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2099 representations for the floating point BITNUM values.
2101 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2103 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2104 in the table in one's complement form, as they appear in the
2106 (tic80_symbol_to_value): Use macros to access predefined
2108 (tic80_value_to_symbol): Ditto.
2109 (tic80_next_predefined_symbol): New function.
2110 * tic80-dis.c (print_operand_bitnum): Remove code that did
2111 one's complement for BITNUM values.
2113 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2115 * makefile.vms: Remove 8 bit characters. Update to latest
2118 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2120 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2122 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2124 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2125 (IMM24_PCREL): Likewise.
2127 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2129 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2130 address for an extended PC relative instruction that is not a
2133 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2135 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2138 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2140 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2141 (tic80_opcodes): Sort entries so that long immediate forms
2142 come after short immediate forms, making it easier for
2143 assembler to select the right one for a given operand.
2145 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2147 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2149 (print_insn_mips16): Likewise.
2151 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2153 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2154 a symbol class that restricts translation to just that
2155 class (general register, condition code, etc).
2157 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2159 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2160 and REG_DEST_E for register operands that have to be
2161 an even numbered register. Add REG_FPA for operands that
2162 are one of the floating point accumulator registers.
2163 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2164 (tic80_opcodes): Change entries that need even numbered
2165 register operands to use the new operand table entries.
2166 Add "or" entries that are identical to "or.tt" entries.
2168 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2170 * mips16-opc.c: Add new cases of exit instruction for
2172 * mips-dis.c (print_mips16_insn_arg): Display floating point
2173 registers in operands of exit instruction. Print `$' before
2174 register names in operands of entry and exit instructions.
2176 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2178 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2179 pairs for all predefined symbols recognized by the assembler.
2180 Also used by the disassembling routines.
2181 (tic80_symbol_to_value): New function.
2182 (tic80_value_to_symbol): New function.
2183 * tic80-dis.c (print_operand_control_register,
2184 print_operand_condition_code, print_operand_bitnum):
2185 Remove private tables and use tic80_value_to_symbol function.
2187 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2189 * d10v-dis.c (print_operand): Change address printing
2190 to correctly handle PC wrapping. Fixes PR11490.
2192 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2194 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2197 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2199 * mips-dis.c (print_insn_mips16): Set insn_info information.
2200 (print_mips16_insn_arg): Likewise.
2202 * mips-dis.c (print_insn_mips16): Better handling of an extend
2203 opcode followed by an instruction which can not be extended.
2205 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2207 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2208 coldfire moveb instruction to not allow an address register as
2209 destination. Although the documentation does not indicate that
2210 this is invalid, experiments uncovered unexpected behavior.
2211 Added a comment explaining the situation. Thanks to Andreas
2212 Schwab for pointing this out to me.
2214 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2216 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2217 entries are presorted so that entries with the same mnemonic are
2218 adjacent to each other in the table. Sort the entries for each
2219 instruction so that this is true.
2221 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2223 * m68k-dis.c: Include <libiberty.h>.
2224 (print_insn_m68k): Sort the opcode table on the most significant
2225 nibble of the opcode.
2227 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2229 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2230 "vsub", "vst", "xnor", and "xor" instructions.
2231 (V_a1): Renamed from V_a, msb of accumulator reg number.
2232 (V_a0): Add macro, lsb of accumulator reg number.
2234 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2236 * tic80-dis.c (print_insn_tic80): Broke excessively long
2237 function up into several smaller ones and arranged for
2238 the instruction printing function to be callable recursively
2239 to print vector instructions that have both a load and a
2240 math instruction packed into a single opcode.
2241 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2242 to explain why it comes after the other vector opcodes.
2244 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2246 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2247 move insns to handle immediate operands.
2249 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2251 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2252 fix operand mask in the "moveml" entries for the coldfire.
2254 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2256 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2257 New macros for building vector instruction opcodes.
2258 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2259 FMT_LI, which were unused. The field is now a flags field.
2260 Remove some opcodes that are possible, but illegal, such
2261 as long immediate instructions with doubles for immediate
2262 values. Add "vadd" and "vld" instructions.
2264 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2266 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2267 the order more logical. Move the shift alias instructions ("rotl",
2268 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2269 interspersed with the regular sr.x and sl.x instructions. Add
2270 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2271 "sub", "subu", "swcr", and "trap".
2273 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2275 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2276 (OFF_SL_PC): Renamed from OFF_SL.
2277 (OFF_SS_BR): New operand type for base relative operand.
2278 (OFF_SL_BR): New operand type for base relative operand.
2279 (REG_BASE): New operand type for base register operand.
2280 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2281 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2282 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2284 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2285 10 char field, padded with spaces on rhs, rather than a string
2286 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2287 than old TIC80_OPERAND_RELATIVE. Add support for new
2288 TIC80_OPERAND_BASEREL flag bit.
2290 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2292 * tic80-dis.c (print_insn_tic80): Print floating point operands
2294 * tic80-opc.c (SPFI): Add single precision floating point
2295 immediate operand type.
2296 (ROTATE): Add rotate operand type for shifts.
2297 (ENDMASK): Add for shifts.
2298 (n): Macro for the 'n' bit.
2299 (i): Macro for the 'i' bit.
2300 (PD): Macro for the 'PD' field.
2301 (P2): Macro for the 'P2' field.
2302 (P1): Macro for the 'P1' field.
2303 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2306 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2308 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2309 adding in current address for pc-relative operands.
2311 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2313 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2314 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2315 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2316 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2317 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2318 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2319 (REG_SCALED, LSI_SCALED): New operand types.
2320 (E): New macro for 'E' bit at bit 27.
2321 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2322 opcodes, including the various size flavors (b,h,w,d) for
2323 the direct load and store instructions.
2325 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2327 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2329 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2330 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2331 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2332 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2333 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2334 masks with "MASK_* & ~M_*" to get the M bit reset.
2335 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2337 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2339 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2340 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2341 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2343 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2344 CC, SICR, and LICR table entries.
2345 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2346 "bcnd", and "brcr" opcodes.
2348 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2350 * ppc-opc.c (powerpc_operands): Make comment match the
2351 actual fields (no shift field).
2352 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2353 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2354 partial implementation, work in progress.
2355 * tic80-opc.c (tic80_operands): Begin construction operands table.
2356 (tic80_opcodes): Continue populating opcodes table and start
2357 filling in the operand indices.
2358 (tic80_num_opcodes): Add this.
2360 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2362 * m68k-opc.c: Add #B case for moveq.
2364 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2366 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2367 before they are used.
2369 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2371 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2372 for "breakpoint" instruction.
2374 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2376 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2377 (dep): Use ALL_CFLAGS rather than CFLAGS.
2379 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2381 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2384 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2386 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2387 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2389 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2391 * mips16-opc.c: Add "abs".
2393 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2395 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2396 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2397 (disassembler): Add bfd_arch_tic80 support to set disassemble
2398 to print_insn_tic80.
2399 * tic80-dis.c (print_insn_tic80): Add stub.
2401 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2403 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2404 * configure: Regenerate with autoconf.
2405 * tic80-dis.c: Add file.
2406 * tic80-opc.c: Add file.
2408 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2410 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2412 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2414 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2415 (mn10200_opcodes): Use it for some logicals and btst insns.
2416 Add "break" and "trap" instructions.
2418 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2420 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2422 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2424 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2425 relative load or add now depends upon whether the instruction is
2428 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2430 * mn10200-dis.c: Finish writing disassembler.
2431 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2432 Fix mask for "jmp (an)".
2434 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2435 handle endianness issues for mn10300.
2437 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2439 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2441 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2442 instruction. Fix opcode field for "movb (imm24),dn".
2444 * mn10200-opc.c (mn10200_operands): Fix insertion position
2447 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2449 * mn10200-opc.c: Create mn10200 opcode table.
2450 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2451 but moving along nicely.
2453 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2455 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2457 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2459 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2460 specifiers for fmovem* instructions.
2462 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2464 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2466 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2468 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2471 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2473 * mn10300-opc.c: Add some comments explaining the various
2476 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2478 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2480 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2483 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2484 operand specifiers in fmovm* instructions.
2486 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2488 * ppc-opc.c (insert_li): Give an error if the offset has the two
2489 least significant bits set.
2491 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2493 * mips-dis.c (print_insn_mips16): Separate the instruction from
2494 the arguments with a tab, not a space.
2496 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2498 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2501 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2504 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2506 * configure: Rebuild with autoconf 2.12.
2508 Add support for mips16 (16 bit MIPS implementation):
2509 * mips16-opc.c: New file.
2510 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2511 (mips16_reg_names): New static array.
2512 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2513 after seeing a 16 bit symbol.
2514 (print_insn_little_mips): Likewise.
2515 (print_insn_mips16): New static function.
2516 (print_mips16_insn_arg): New static function.
2517 * mips-opc.c: Add jalx instruction.
2518 * Makefile.in (mips16-opc.o): New target.
2519 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2520 * configure: Rebuild.
2522 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2524 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2525 operand specifiers in *save, *restore and movem* instructions.
2527 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2530 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2531 register operands for immediate arithmetic, not, neg, negx, and
2532 set according to condition instructions.
2534 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2535 specifier of the effective-address operand in immediate forms of
2536 arithmetic instructions. The specifier for the immediate operand
2537 notes how and where the constant will be stored.
2539 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2541 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2544 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2547 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2549 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2551 * mn10300-dis.c (disassemble): Handle register lists.
2553 * mn10300-opc.c: Fix handling of register list operand for
2554 "call", "ret", and "rets" instructions.
2556 * mn10300-dis.c (disassemble): Print PC-relative and memory
2557 addresses symbolically if possible.
2558 * mn10300-opc.c: Distinguish between absolute memory addresses,
2559 pc-relative offsets & random immediates.
2561 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2563 (disassemble): Handle SPLIT and EXTENDED operands.
2565 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2567 * mn10300-dis.c: Rough cut at printing some operands.
2569 * mn10300-dis.c: Start working on disassembler support.
2570 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2572 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2574 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2576 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2578 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2580 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2582 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2583 register argument is calls and jmp instructions.
2585 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2587 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2588 getx operand. Fix opcode for mulqu imm,dn.
2590 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2592 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2593 in MN10300_OPERAND_SPLIT operands for how many bits
2594 appear in the basic insn word. Add IMM32_HIGH24,
2595 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2596 (mn10300_opcodes): Use new operands as needed.
2598 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2599 for bset, bclr, btst instructions.
2600 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2602 * mn10300-opc.c (mn10300_operands): Remove many redundant
2603 operands. Update opcode table as appropriate.
2604 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2605 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2607 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2609 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2610 operands (for indexed load/stores). Fix bitpos for DI
2611 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2612 few instructions that insert immediates/displacements in the
2613 middle of the instruction. Add IMM8E for 8 bit immediate in
2614 the extended part of an instruction.
2615 (mn10300_operands): Use new opcodes as appropriate.
2617 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2619 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2620 sequential so the assembler never parallelizes it with
2623 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2625 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2626 a data/address register that appears in register field 0
2627 and register field 1.
2628 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2630 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2632 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2633 standard disassembly.
2635 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2636 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2637 Recategorize PALcode instructions.
2639 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2641 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2643 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2645 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2646 there are no operand types.
2648 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2650 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2652 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2654 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2656 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2658 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2660 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2661 and sst.w instructions.
2663 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2666 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2668 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2671 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2673 * ppc-opc.c (PPCPWR2): Define.
2674 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2677 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2679 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2680 field for movhu instruction.
2682 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2683 cast value to "long" not "signed long" to keep hpux10
2686 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2688 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2691 * mn10300-opc.c (FMT*): Remove definitions.
2693 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2694 for shift-by-register opcodes.
2696 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2697 into [AD][MN][01] for encoding the position of the register
2700 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2702 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2703 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2705 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2707 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2708 Fix various typos. Add "PAREN" operand.
2709 (MEM, MEM2): Define.
2710 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2711 operands. Fix several typos.
2713 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2716 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2718 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2719 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2721 (mn10300_opcodes): Break opcode format out into its own field.
2722 Update many operand fields to deal with signed vs unsigned
2723 issues. Fix one or two typos in the "mov" instruction
2724 opcode, mask and/or operand fields.
2726 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2728 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2729 m68851 wasn't reset.
2731 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2733 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2734 all opcodes. Very rough cut at operands for all opcodes.
2736 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2739 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2741 * mn10200-opc.c, mn10300-opc.c: New files.
2742 * mn10200-dis.c, mn10300-dis.c: New files.
2743 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2744 * disassemble.c: Break mn10x00 support into 10200 and 10300
2746 * configure.in: Likewise.
2747 * configure: Rebuilt.
2749 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2751 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2753 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2755 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2757 * disassemble (ARCH_mn10x00): Define.
2758 (disassembler): Handle bfd_arch_mn10x00.
2759 * configure.in: Recognize bfd_mn10x00_arch.
2760 * configure: Rebuilt.
2762 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2764 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2765 accordingly. Don't declare functions using op_rtn.
2767 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2769 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2770 params to be more standard.
2771 * (disassemble): Print absolute addresses and symbolic names for
2772 branch and jump targets.
2773 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2775 * (v850_opcodes): Add breakpoint insn.
2777 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2779 * m68k-opc.c: Move the fmovemx data register cases before the
2780 other cases, so that they get recognized before the data register
2781 does gets treated as a degenerate register list.
2783 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2785 * mips-opc.c: Add a case for "div" and "divu" with two registers
2786 and a destination of $0.
2788 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2790 * mips-dis.c (print_insn_arg): Add prototype.
2791 (_print_insn_mips): Ditto.
2793 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2795 * mips-dis.c (print_insn_arg): Print condition code registers as
2798 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2800 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2802 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2804 * v850-dis.c (disassemble): Make static. Provide prototype.
2806 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2808 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2811 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2813 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2814 ']' characters into the output stream.
2815 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2816 Add "memop" field to all opcodes (for the disassembler).
2817 Reorder opcodes so that "nop" comes before "mov" and "jr"
2818 comes before "jarl".
2820 * v850-dis.c (print_insn_v850): Fix typo in last change.
2822 * v850-dis.c (print_insn_v850): Properly handle disassembling
2823 a two byte insn at the end of a memory region when the memory
2824 region's size is only two byte aligned.
2826 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2828 * v850-dis.c (v850_reg_names): Define.
2829 (v850_sreg_names, v850_cc_names): Likewise.
2830 (disassemble): Very rough cut at printing operands (unformatted).
2832 * v850-opc.c (BOP_MASK): Fix.
2833 (v850_opcodes): Fix mask for jarl and jr.
2835 * v850-dis.c: New file. Skeleton for disassembler support.
2836 * Makefile.in Remove v850 references, they're not needed here.
2837 * configure.in: Add v850-dis.o when building v850 toolchains.
2838 * configure: Rebuilt.
2839 * disassemble.c (disassembler): Call v850 disassembler.
2841 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2842 (insert_d8_6, extract_d8_6): New functions.
2843 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2844 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2846 (IF4A, IF4B): Use "D7" instead of "D7S".
2847 (IF4C, IF4D): Use "D8_7" instead of "D8".
2848 (IF4E, IF4F): New. Use "D8_6".
2849 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2850 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2852 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2853 (v850_operands): Change D16 to D16_15, use special insert/extract
2854 routines. New new D16 that uses the generic insert/extract code.
2855 (IF7A, IF7B): Use D16_15.
2856 (IF7C, IF7D): New. Use D16.
2857 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2859 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2860 message. Issue an error if the branch offset is odd.
2862 * v850-opc.c: Add notes about needing special insert/extract
2863 for all the load/store insns, except "ld.b" and "st.b".
2865 * v850-opc.c (insert_d22, extract_d22): New functions.
2866 (v850_operands): Use insert_d22 and extract_d22 for
2868 (insert_d9): Fix range check.
2870 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2872 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2873 and set bits field to D9 and D22 operands.
2875 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2877 * v850-opc.c (v850_operands): Define SR2 operand.
2878 (v850_opcodes): "ldsr" uses R1,SR2.
2880 * v850-opc.c (v850_opcodes): Fix opcode specs for
2881 sld.w, sst.b, sst.h, sst.w, and nop.
2883 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2885 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2886 end of the opcode table.
2888 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2890 * d10v-opc.c (pre_defined_registers): Added register pairs,
2891 "r0-r1", "r2-r3", etc.
2893 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2895 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2896 Create I16U for an unsigned 16bit mmediate operand.
2897 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2899 * v850-opc.c (v850_operands): Define EP operand.
2900 (IF4A, IF4B, IF4C, IF4D): Use EP.
2902 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2903 with immediate operand, "movhi". Tweak "ldsr".
2905 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2906 correct. Get sld.[bhw] and sst.[bhw] closer.
2908 * v850-opc.c (v850_operands): "not" is a two byte insn
2910 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2912 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2914 * v850-opc.c (two): Get order of words correct.
2916 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2918 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2919 register source and destination operands.
2920 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2922 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2923 same thinko in "trap" opcode.
2925 * v850-opc.c (v850_opcodes): Add initializer for size field
2928 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2929 Add D8 for 8-bit unsigned field in short load/store insns.
2930 (IF4A, IF4D): These both need two registers.
2931 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2932 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2933 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
2934 for "ldsr" and "stsr".
2935 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
2938 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
2939 short store word (sst.w).
2941 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2943 * v850-opc.c (v850_operands): Added insert and extract fields,
2944 pointers to functions that handle unusual operand encodings.
2946 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
2948 * v850-opc.c (v850_opcodes): Enable "trap".
2950 * v850-opc.c (v850_opcodes): Fix order of displacement
2951 and register for "set1", "clr1", "not1", and "tst1".
2953 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
2955 * v850-opc.c (v850_operands): Add "B3" support.
2956 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
2959 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
2961 * v850-opc.c: Close unterminated comment.
2963 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2965 * v850-opc.c (v850_operands): Add flags field.
2966 (v850_opcodes): add move opcodes.
2968 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2970 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
2971 * configure: (bfd_v850v_arch) Add new case.
2972 * configure.in: (bfd_v850_arch) Add new case.
2973 * v850-opc.c: New file.
2975 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
2977 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
2979 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2981 * d10v-opc.c: Add additional information to the opcode
2982 table to help determinine which instructions can be done
2985 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
2987 * mpw-make.sed: Update editing of include pathnames to be
2990 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
2992 * arm-opc.h: Added "bx" instruction definition.
2994 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
2996 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
2998 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3000 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3002 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3004 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3006 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3008 * makefile.vms: Update for alpha-opc changes.
3010 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3012 * i386-dis.c (print_insn_i386): Actually return the correct value.
3013 (ONE, OP_ONE): #ifdef out; not used.
3015 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3017 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3018 Changed subi operand type to treat 0 as 16.
3020 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3022 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3025 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3027 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3028 memory transfer instructions. Add new format string entries %h and %s.
3029 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3032 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3034 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3035 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3037 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3039 * alpha-dis.c (print_insn_alpha_osf): Remove.
3040 (print_insn_alpha_vms): Remove.
3041 (print_insn_alpha): Make globally visible. Chose the register
3042 names based on info->flavour.
3043 * disassemble.c: Always return print_insn_alpha for the alpha.
3045 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3047 * d10v-dis.c (dis_long): Handle unknown opcodes.
3049 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3051 * d10v-opc.c: Changes to support signed and unsigned numbers.
3052 All instructions with the same name that have long and short forms
3053 now end in ".l" or ".s". Divs added.
3054 * d10v-dis.c: Changes to support signed and unsigned numbers.
3056 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3058 * d10v-dis.c: Change all functions to use info->print_address_func.
3060 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3062 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3063 move ccr/sr insns more strict so that the disassembler only
3064 selects them when the addressing mode is data register.
3066 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3067 * d10v-opc.c (pre_defined_registers): Declare.
3068 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3069 to pick a better name for the registers.
3071 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3073 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3074 operands for fexpand and fpmerge. From Christian Kuehnke
3075 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3077 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3079 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3080 print routine. Take new regnames and cpumask arguments.
3081 Kill the environment variable nonsense.
3082 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3083 (print_insn_alpha_vms): New function. Do VMS style regnames.
3084 * disassemble.c (disassembler): Test bfd flavour to pick
3085 between OSF and VMS routines. Default to OSF.
3087 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3089 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3090 * configure: Rebuild.
3091 * Makefile.in (install): Use @INSTALL_SHLIB@.
3093 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3095 * configure: (bfd_d10v_arch) Add new case.
3096 * configure.in: (bfd_d10v_arch) Add new case.
3097 * d10v-dis.c: New file.
3098 * d10v-opc.c: New file.
3099 * disassemble.c (disassembler) Add entry for d10v.
3101 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3103 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3104 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3106 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3108 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3109 distinguish between variants of the instruction set.
3110 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3111 distinguish between variants of the instruction set.
3113 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3115 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3116 the 8086 instruction set.
3117 * i386-dis.c: General cleanups. Make most things static. Add
3118 prototypes. Get rid of static variables aflags and dflags. Pass
3119 them as args (to almost everything).
3121 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3123 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3125 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3127 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3128 if the next arg is marked with SRC_IN_DST. Gross.
3130 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3131 we're looking for and find EXR.
3133 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3134 if we're looking for KBIT and we don't find it.
3136 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3139 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3140 3bit immediate operands.
3142 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3144 * Released binutils 2.7.
3146 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3147 <kkaempf@progis.ac-net.de>.
3149 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3151 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3153 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3155 * sparc-dis.c (print_insn_sparclite): New routine to print
3156 sparclite instructions.
3158 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3160 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3162 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3164 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3165 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3166 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3168 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3170 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3171 Use autoconf-set values.
3172 (docdir, oldincludedir): Removed.
3173 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3175 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3177 * alpha-opc.c: New file.
3178 * alpha-opc.h: Remove.
3179 * alpha-dis.c: Complete rewrite to use new opcode table.
3180 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3181 * configure: Rebuild with autoconf 2.10.
3182 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3183 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3185 (alpha-opc.o): New target.
3187 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3189 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3190 Set imm_added_to_rs1 even if the source and destination register
3193 * sparc-opc.c: Add some two operand forms of the wr instruction.
3195 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3197 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3200 * disassemble.c (disassembler): Handle H8/S.
3201 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3203 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3205 * sparc-opc.c: Add beq/teq as aliases for be/te.
3207 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3208 <sergei@msil.sps.mot.com>.
3210 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3212 * makefile.vms: New file.
3214 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3216 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3218 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3221 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3223 * i386-dis.c (OP_OFF): Call append_prefix.
3225 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3227 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3228 unsigned long to silence a warning from the Solaris PowerPC
3231 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3233 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3235 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3237 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3239 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3240 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3241 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3242 cpush, cpusha, cpull sparclet insns.
3244 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3246 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3248 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3250 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3251 Set F_FLOAT on other floating point instructions.
3253 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3255 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3257 (powerpc_opcodes): Add 860/821 specific SPRs.
3259 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3261 * configure.in: Permit --enable-shared to specify a list of
3262 directories. Set and substitute BFD_PICLIST.
3263 * configure: Rebuild.
3264 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3265 uses. Set to @BFD_PICLIST@.
3267 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3269 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3270 not "abs", which may be needed for the absolute in something
3271 like btst #0,@10:8. Print L_3 immediates separately from other
3272 immediates. Change ABSMOV reference to ABS8MEM.
3274 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3276 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3277 (current_arch_mask): New static global.
3278 (compute_arch_mask): New static function.
3279 (print_insn_sparc): Delete sparc_v9_p. New static local
3280 current_mach. Resort opcode table if current_mach changes.
3281 Generalize "insn not supported" test.
3282 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3283 Delete test for v9/!v9.
3284 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3286 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3287 (brfcx): Renamed to FBRX.
3288 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3289 coprocessor mnemonics are not supported on the sparclet).
3290 (condf): Renamed to CONDF.
3291 (SLCBCC2): Delete F_ALIAS flag.
3293 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3295 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3296 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3298 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3300 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3301 that the shared library version number is set correctly.
3303 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3305 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3306 Miles Bader <miles@gnu.ai.mit.edu>.
3307 * configure: Rebuild.
3309 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3311 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3314 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3316 * configure: Rebuild with autoconf 2.8.
3318 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3320 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3321 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3323 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3325 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3326 since they appear as targets in Makefile.in.
3327 * configure: Rebuild.
3329 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3331 * mpw-make.sed: Edit out shared library support bits.
3333 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3335 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3336 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3337 (sparc_opcodes): Add sparclet insns.
3338 (sparclet_cpreg_table): New static local.
3339 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3340 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3342 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3344 * i386-dis.c (index16): New static variable.
3345 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3347 (OP_indirE): Return result of OP_E.
3348 (OP_E): Check for 16 bit addressing mode, and disassemble
3349 correctly. Optimised 32 bit case a little. Don't print
3350 "(base,index,scale)" when sib specifies only an offset.
3352 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3354 * configure.in: Set and substitute SHLIB_DEP.
3355 * configure: Rebuild.
3356 * Makefile.in (SHLIB_DEP): New variable.
3357 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3358 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3359 COMMON_SHLIB, add them to piclist with appropriate modifications.
3360 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3361 here: just use piclist.
3363 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3365 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3366 (print_insn_sparc): Rewrite v9/not-v9 tests.
3367 (compare_opcodes): Likewise.
3368 * sparc-opc.c (MASK_<ARCH>): Define.
3369 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3370 (sparclet,v6notv9): Define.
3371 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3372 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3374 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3376 * configure.in: Call AC_PROG_CC before configure.host.
3377 * configure: Rebuild.
3379 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3381 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3383 * i386-dis.c (onebyte_has_modrm): New static array.
3384 (twobyte_has_modrm): New static array.
3385 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3387 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3389 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3392 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3394 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3397 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3399 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3400 m68010up, not just m68020up | cpu32.
3402 * Makefile.in (SONAME): New variable.
3403 ($(SHLINK)): Make a link to the transformed name, as well.
3404 (stamp-tshlink): New target.
3405 (install): Skip stamp-tshlink during install.
3407 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3409 * configure.in: Call AC_ARG_PROGRAM.
3410 * configure: Rebuild.
3411 * Makefile.in (program_transform_name): New variable.
3412 (install): Transform library name before installing it.
3414 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3416 * i960-dis.c (mem): Add HX dcinva instruction.
3418 Support for building as a shared library, based on patches from
3419 Alan Modra <alan@spri.levels.unisa.edu.au>:
3420 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3421 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3422 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3423 * configure: Rebuild.
3424 * Makefile.in (ALLLIBS): New variable.
3425 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3426 (COMMON_SHLIB, SHLINK): New variables.
3427 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3428 (STAGESTUFF): Remove variable.
3429 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3430 (stamp-piclist, piclist): New targets.
3431 ($(SHLIB), $(SHLINK)): New targets.
3432 ($(OFILES)): Depend upon stamp-picdir.
3433 (disassemble.o): Build twice if PICFLAG is set.
3434 (MOSTLYCLEAN): Add pic/*.o.
3435 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3436 (distclean): Remove pic and stamp-picdir.
3437 (install): Install shared libraries.
3438 (stamp-picdir): New target.
3440 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3442 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3443 Print unknown instruction as "unknown", rather than in hex.
3445 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3447 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3449 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3451 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3453 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3455 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3456 when necessary. From Ulrich Drepper
3457 <drepper@myware.rz.uni-karlsruhe.de>.
3459 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3461 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3462 sparc_num_opcodes. Update architecture enum values.
3463 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3464 (sparc_opcode_lookup_arch): New function.
3465 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3466 (sparc_opcodes): Add v9a shutdown insn.
3468 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3470 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3471 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3473 (print_insn_sparc64): Deleted.
3474 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3477 * sparc-opc.c (architecture_pname): Add v9a.
3479 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3481 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3482 incorrectly defined as 0x16 when it should be 0x15.
3483 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3484 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3485 excb (exception barrier) which is defined in the Alpha
3486 Architecture Handbook version 2.
3487 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3488 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3489 disassembled as or, for example.
3491 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3493 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3494 (_print_insn_mips): Change i from int to unsigned int.
3496 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3498 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3499 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3501 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3503 * i386-dis.c: Added Pentium Pro instructions.
3505 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3507 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3510 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3512 * sh-opc.h (sh_nibble_type): Added REG_B.
3513 (sh_arg_type): Added A_REG_B.
3514 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3516 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3518 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3520 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3522 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3524 * Makefile.in (distclean): Remove stamp-h. From Ronald
3525 F. Guilmette <rfg@monkeys.com>.
3527 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3529 From David Mosberger-Tang <davidm@azstarnet.com>:
3530 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3533 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3535 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3536 (sh_table): Added many SH3 opcodes.
3537 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3539 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3541 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3542 (subco,subco.): Mark this PPC, not PPCCOM.
3544 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3546 * configure: Rebuild with autoconf 2.7.
3548 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3550 * configure: Rebuild with autoconf 2.6.
3552 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3554 * configure.in: Sort list of architectures. Accept but do nothing
3555 for alliant, convex, pyramid, romp, and tahoe.
3557 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3559 * a29k-dis.c (print_special): Change num to unsigned int.
3561 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3563 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3566 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3568 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3569 * configure: Rebuilt.
3571 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3573 * configure.in: Add case for bfd_i860_arch.
3574 * configure: Rebuild.
3576 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3578 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3579 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3580 (NEXTDOUBLE): Likewise.
3581 (print_insn_m68k): Don't match fmoveml if there is more than one
3582 register in the list.
3583 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3585 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3587 * m68k-opc.c: Use #W rather than #w.
3588 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3590 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3592 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3593 and likewise for all the dbxx opcodes.
3595 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3597 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3599 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3601 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3602 the VR4100 specific instructions to the mips_opcodes structure.
3604 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3606 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3607 ugly Metrowerks bug in CW6, is fixed in CW7.
3609 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3611 * ppc-opc.c (whole file): Add flags for common/any support.
3613 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3615 * Makefile.in (BISON): Remove macro.
3616 (FLAGS_TO_PASS): Remove BISON.
3618 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3620 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3622 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3623 instructions that take no args by looking at the match mask.
3624 (print_insn_arg): Always print "%" before register names.
3625 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3626 [case '_']: Don't print "@#" before address.
3627 [case 'J']: Use "%s" as format string, not register name.
3628 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3630 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3632 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3635 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3637 From David Mosberger-Tang <davidm@azstarnet.com>
3639 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3640 (alpha_insn_set): added definitions for VAX floating point
3641 instructions (Unix compilers don't generate these, but handcoded
3642 assembly might still use them).
3644 * alpha-dis.c (print_insn_alpha): added support for disassembling
3645 the miscellaneous instructions in the Alpha instruction set.
3647 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3649 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3650 no longer create sysdep.h, sed ppc-opc.c to work around a
3651 serious Metrowerks C bug.
3652 * mpw-make.in: Remove.
3653 * mpw-make.sed: New file, used by mpw-configure to edit
3654 Makefile.in into an MPW makefile.
3656 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3658 * Makefile.in (maintainer-clean): New synonym for realclean.
3660 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3662 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3663 which use '0', '1', and '2' instead. Specify the proper size for
3664 a pmove immediate operand. Correct the pmovefd patterns to be
3665 moves to a register, not from a register.
3666 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3668 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3670 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3671 %psr, %wim, %tbr as F_NOTV9.
3673 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3675 * Makefile.in (Makefile): Just rebuild Makefile when running
3677 (config.h, stamp-h): New targets.
3678 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3679 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3680 rebuilding config.h.
3681 * configure: Rebuild.
3683 * mips-opc.c: Change unaligned loads and stores with "t,A"
3684 operands to use "t,A(b)".
3686 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3688 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3690 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3692 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3693 until 3 instead of until 2.
3695 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3697 * Makefile.in (ALL_CFLAGS): Define.
3698 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3699 (MOSTLYCLEAN): Add config.log.
3700 (distclean): Don't remove config.log.
3701 * configure.in: Substitute HDEFINES.
3702 * configure: Rebuild.
3704 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3706 * sh-opc.h (sh_arg_type): Add F_FR0.
3707 (sh_table, case fmac): Add F_FR0 as first argument.
3709 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3711 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3713 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3715 * sparc-dis.c: Remove all references to NO_V9.
3717 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3719 * aclocal.m4: Just include ../bfd/aclocal.m4.
3720 * configure: Rebuild.
3722 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3724 * sparc-dis.c (X_DISP19): Define.
3725 (print_insn, case 'G'): Use it.
3726 (print_insn, case 'L'): Sign extend displacement.
3728 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3730 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3731 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3732 host_makefile_frag or frags.
3733 * aclocal.m4: New file.
3734 * configure: Rebuild.
3735 * Makefile.in (INSTALL): Set to @INSTALL@.
3736 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3737 (INSTALL_DATA): Set to @INSTALL_DATA@.
3739 (AR_FLAGS): Set to rc rather than qc.
3740 (CC): Define as @CC@.
3741 (CFLAGS): Set to @CFLAGS@.
3742 (@host_makefile_frag@): Remove.
3743 (config.status): Remove dependency upon @frags@.
3745 * configure.in: ../bfd/config.bfd now just sets shell variables.
3746 Use them rather than looking through target Makefile fragments.
3747 * configure: Rebuild.
3749 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3751 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3753 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3755 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3756 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3759 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3760 (lookup_{name,value}): New functions.
3761 (prefetch_table): New static local.
3762 (sparc_{encode,decode}_prefetch): New functions.
3763 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3765 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3767 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3770 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3772 * sh-dis.c: Correct comment on first line of file.
3774 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3776 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3778 * sparc-opc.c (asi, membar): New static locals.
3779 (sparc_{encode,decode}_{asi,membar}): New functions.
3780 (sparc_opcodes, membar insn): Fix.
3781 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3782 Support decoding of membar masks.
3785 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3787 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3789 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3791 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3792 and likewise for the other branches. Add bhs as an alias for bcc,
3793 and likewise for the size variants. Add dbhs as an alias for
3796 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3798 * sh-opc.h (FP sts instructions): Update to match reality.
3800 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3802 * m68k-dis.c: (fpcr_names): Add % before all register names.
3803 (reg_names): Likewise.
3804 (print_insn_arg): Don't explicitly print % before register names.
3805 Add % before register names in static array names. In case 'r',
3806 print data registers as `@(Dn)', not `Dn@'. When printing a
3807 memory address, don't print @# before it.
3808 (print_indexed): Change base_disp and outer_disp from int to
3809 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3810 syntax. Sign extend 8 byte displacement correctly.
3811 (print_base): Print using MIT syntax. Print zpc when appropriate.
3812 Change parameter disp from int to bfd_vma.
3814 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3817 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3819 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3820 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3821 * sh-opc.h (sh_arg_type): Add new operand types.
3822 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3824 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3826 * Makefile.in (distclean): Remove generated file config.h.
3828 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3830 * Makefile.in (distclean): Remove generated file config.h.
3832 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3834 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3836 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3838 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3839 rather than numopcodes. Use m68k_opcodes rather than removed
3840 opcode function. Don't check F_ALIAS.
3841 (print_insn_arg): Change first parameter to be const char *.
3842 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3843 (m68k-opc.o): New target.
3844 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3845 * configure: Rebuild.
3847 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3849 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3850 (opcode_bits, opcode_hash_table): New variables.
3851 (opcodes_initialized): Renamed from opcodes_sorted.
3852 (build_hash_table): New function.
3853 (is_delayed_branch): Use hash table.
3854 (print_insn): Renamed from print_insn_sparc, made static.
3855 Build and use hash table. If !sparc64, ignore sparc64 insns,
3856 and vice-versa if sparc64.
3857 (print_insn_sparc, print_insn_sparc64): New functions.
3858 (compare_opcodes): Move sparc64 opcodes to end.
3859 Print commutative insns with constant second.
3860 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3862 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3864 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3865 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3866 avoids printing a delay slot in a delay slot.
3867 * sh-opc.h (sh_table): Fully bracket last entry.
3869 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3871 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3873 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3875 * configure.in: Get host_makefile_frag from ${srcdir}.
3877 * configure.in: Autoconfiscated. Check for string[s].h. Create
3878 config.h from config.in. Don't set up sysdep.h link.
3879 * sysdep.h: New file.
3880 * configure, config.in: New files, generated from configure.in.
3881 * Makefile.in: Updated to be processed autoconf-style.
3882 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3883 (Makefile): Depend on config.status.
3884 (config.status): New rule.
3885 * configure.bat: Update Makefile substitutions.
3887 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3889 * mips-opc.c (L1): Define.
3890 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3891 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3894 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3896 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3897 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3898 have multiple add units but only a single logical unit.
3900 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3901 shifted by 18, without any insertion or extraction function.
3902 (insert_cr, extract_cr): Remove.
3904 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3906 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3909 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3911 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3912 * sh-opc.h: Add copyright.
3914 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3916 * Makefile.in (crunch-m68k): Delete extra target accidentally
3917 checked in a while ago.
3919 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3921 * sh-opc.h (sh_table): Add SH3 support.
3923 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3925 * sh-opc.h: Added bsrf and braf.
3927 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3929 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3930 bogus [ls]fm{ea,fd} patterns.
3932 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3933 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
3934 initialize it from memory. Make function static.
3935 (print_insn_{big,little}_arm): New functions.
3936 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
3937 the correct endianness.
3939 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
3941 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
3944 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3946 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
3947 17th, so that it builds again using GCC as the compiler.
3949 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3951 * mips-dis.c (print_insn_little_mips): Cast return value from
3952 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
3953 expects an unsigned long, and that might be fewer words of
3954 argument storage (e.g., if bfd_vma is long long on a 32-bit
3956 (print_insn_big_mips): Likewise with bfd_getb32 value.
3957 (_print_insn_mips): Now static.
3959 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
3961 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
3962 gcc memory hog problem with initializer is fixed.
3964 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
3966 Merge in support for Mac MPW as a host.
3967 (Old change descriptions retained for informational value.)
3969 * mpw-config.in (archname): Compute from the config.
3970 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
3972 * mpw-config.in (target_arch): Compute from canonical target.
3973 (m68k, mips, powerpc, sparc): Add architectures.
3974 * mpw-make.in (disassemble.c.o): Add.
3975 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
3977 * mpw-config.in (BFD_MACHINES): Set to a default value.
3978 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
3980 * mpw-make.in (CSEARCH): Add extra-include to search path.
3982 * mpw-config.in (varargs.h): Don't create.
3983 (sysdep.h): Create using forward-include.
3984 * mpw-make.in (CSEARCH): Add include/mpw to search path.
3986 * mpw-config.in: New file, MPW version of configure.in.
3987 * mpw-make.in: New file, MPW version of Makefile.in.
3989 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3991 * alpha-dis.c (print_insn_alpha): Put empty statement after
3994 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
3996 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
3997 (low_sign_extend): Likewise.
3998 (get_field): Delete unused function.
3999 (set_field, deposit_14, deposit_21): Likewise.
4001 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4003 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4006 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4008 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4010 * alpha-opc.h (OSF_ASMCODE): define
4011 print pal-code names as defined in App C of the
4012 Alpha Architecture Reference Manual
4014 * alpha-dis.c: cleaned up output
4015 print stylized code forms as defined in App A.4.3 of the
4016 Alpha Architecture Reference Manual
4018 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4020 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4022 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4025 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4027 * m68k-dis.c (opcode): New function. Returns address of opcode
4028 table entry given index, even if the opcode table was split to
4029 work around gcc bugs.
4030 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4032 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4033 (reg_names): Now const.
4034 (print_insn_arg): Arrays cacheFieldName and names now const.
4035 (print_indexed): Array scales now const.
4037 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4039 * ppc-opc.c: Sort recently added instructions by minor opcode
4040 number within major opcode number.
4042 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4044 * hppa-dis.c: Include libhppa.h.
4046 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4048 * mips-opc.c: Change dli to use M_DLI, and add dla.
4050 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4052 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4054 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4056 * mips-opc.c: Add r4650 mul instruction.
4058 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4060 * mips-opc.c: Add uld and usd macros for unaligned double load and
4063 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4065 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4066 mfdcr, mtdcr, icbt, iccci.
4068 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4070 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4071 signed char fields to shorts, more portable.
4073 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4075 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4076 char fields as signed chars, since they may have negative values.
4078 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4080 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4081 (mycroft@netbsd.org).
4083 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4085 From "Logg, Ed" <elogg@ea.com>:
4086 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4087 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4090 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4092 * ppc-opc.c: Changes based on patch from David Edelsohn
4093 <edelsohn@mhpcc.edu>.
4094 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4097 (insert_tbr): New static function.
4098 (extract_tbr): New static function.
4099 (XFXFXM_MASK, XFXM): Define.
4100 (XSPRBAT_MASK, XSPRG_MASK): Define.
4101 (powerpc_opcodes): Add instructions to access special registers by
4102 name. Add mtcr and mftbu.
4104 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4106 * mips-opc.c (P3): Define.
4107 (mips_opcodes): Add mad and madu.
4109 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4111 * configure.in: Add W65 support.
4112 * disassemble.c: Likewise.
4113 * w65-opc.h, w65-dis.c: New files.
4115 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4117 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4120 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4122 * mips-opc.c: Add dli as a synonym for li.
4124 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4126 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4127 print something for reserved opcode values, even if it won't
4130 * mips-dis.c (_print_insn_mips): When initializing, shift right
4131 and mask, to avoid sign extension problems on the Alpha.
4133 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4136 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4138 * sh-opc.h (mov.l gbr): Get direction right.
4139 * sh-dis.c (print_insn_shx): New function.
4140 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4141 print opcodes with right byte order.
4143 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4145 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4146 to avoid conflicts with getopt.
4148 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4150 * hppa-dis.c (print_insn_hppa): Read the instruction using
4151 bfd_getb32, so that it works on a little endian or 64 bit host.
4152 Remove unused local variable op.
4154 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4156 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4157 addu does not work correctly if -mips3.
4159 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4161 * a29k-dis.c (print_special): Add special register names defined
4162 on 29030, 29040 and 29050.
4163 (print_insn): Handle new operand type 'I'.
4165 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4167 * Makefile.in (INSTALL): Use top level install.sh script.
4169 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4171 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4172 that it works on a little endian host.
4174 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4176 * configure.in: Use ${config_shell} when running config.bfd.
4178 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4180 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4182 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4184 * a29k-dis.c (print_insn): Print the opcode.
4186 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4188 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4190 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4192 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4194 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4196 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4197 which store a value into memory.
4199 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4201 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4202 * arm-dis.c, arm-opc.h: New files.
4204 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4206 * Makefile.in (ns32k-dis.o): Add dependency.
4207 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4208 string, not as array of chars.
4210 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4212 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4214 * sparc-opc.c: Added sparclite extended FP operations, and
4215 versions of v9 impdep* instructions permitting specification of
4218 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4220 * i960-dis.c (reg_names): Now const.
4221 (struct sparse_tabent): New type, copied from array type in mem
4223 (ctrl): Local static array ctrl_tab now const.
4224 (cobr): Local static array cobr_tab now const.
4225 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4226 static variable mem_tab no longer explicitly initialized. Changed
4227 mem_init to const array of struct sparse_tabent.
4228 (reg): Local static variable reg_tab no longer explicitly
4229 initialized. Changed reg_init to const array of struct
4231 (ea): Local static array scale_tab now const.
4233 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4236 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4238 * configure.bat: the disassember needs to be enabled for
4239 "objdump -d" to work in djgpp.
4241 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4243 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4244 (invalid_float): Enabled general version, doesn't require running
4245 on ns32k host. Changed to take char* argument, and test for
4246 explicitly specified sizes, instead of using sizeof() on host CPU
4248 (INVALID_FLOAT): Cast first argument.
4249 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4250 list_P032, list_M032): Now const.
4251 (optlist, list_search): Made appropriate arguments now point to
4253 (print_insn_arg): Changed static array of one-character-string
4254 pointers into a static const array of characters; fixed sprintf
4255 statement accordingly.
4257 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4259 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4260 from distribution. A ns32k-dis.c from a previous distribution has
4261 been brought up to date and supports the new interface.
4263 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4265 * configure.in: add bfd_ns32k_arch target support.
4267 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4268 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4270 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4272 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4275 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4277 * h8300-dis.c, mips-dis.c: Don't use true and false.
4279 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4281 * configure.in: Change --with-targets to --enable-targets.
4283 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4285 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4286 opcodes to the first instruction with that opcode, to speed
4287 disassembly of large files. From ralphc@pyramid.com (Ralph
4290 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4292 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4294 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4296 * configure.bat: update to latest makefile.in
4298 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4300 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4301 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4302 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4303 slot insn is in a delay slot.
4304 * z8k-opc.h: (resflg): Fix patterns.
4305 * h8500-opc.h Fix CR insn patterns.
4307 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4309 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4310 "cmpl" before POWER versions, so that gas -many uses them.
4312 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4314 * disassemble.c: New file.
4315 * Makefile.in (OFILES): Add disassemble.o.
4316 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4317 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4318 binutils/configure.in.
4320 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4321 opcode being examined.
4323 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4325 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4326 (insert_ral, insert_ram, insert_ras): New functions.
4327 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4328 RAS for store with update.
4330 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4332 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4333 (edelsohn@npac.syr.edu).
4335 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4337 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4340 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4342 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4344 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4346 * ppc-opc.c (powerpc_operands): The signedp field has been
4347 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4348 instead. Add new operand SISIGNOPT.
4349 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4350 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4351 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4354 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4356 * i386-dis.c (struct private): Renamed to dis_private. `private'
4357 is a reserved word for dynix cc.
4359 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4361 * configure.in: Change error message to refer to bfd/config.bfd
4362 rather than bfd/configure.in.
4364 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4366 * ppc-opc.c: Define POWER2 as short alias flag.
4367 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4370 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4372 * i960-dis.c (print_insn_i960): Don't read a second word for
4373 opcodes 0, 1, 2 and 3.
4375 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4377 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4379 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4381 * m68881-ext.c: Removed; no longer used.
4382 * Makefile.in: Changed accordingly.
4384 * m68k-dis.c (ext_format_68881): Don't declare.
4385 (print_insn_m68k): If an instruction uses place 'i', it uses at
4386 least four fixed bytes.
4387 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4388 extended float, convert to double using floatformat_to_double, not
4389 ieee_extended_to_double, and fetch the data before converting it.
4391 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4393 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4394 davidj@ICSI.Berkeley.EDU (David Johnson).
4396 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4398 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4399 PowerPC uses bdnz[l][a].
4401 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4403 * dis-buf.c, i386-dis.c: Include sysdep.h.
4405 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4407 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4409 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4410 by Motorola PowerPC 601 with PPC_OPCODE_601.
4411 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4412 Disassemble Motorola PowerPC 601 instructions as well as normal
4413 PowerPC instructions.
4415 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4417 * i960-dis.c (reg, mem): Just use a static array instead of
4420 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4422 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4423 condition name index if this is for a negated condition.
4425 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4426 Floating point format for 'H' operand is backwards from normal
4427 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4428 operands (fmpyadd and fmpysub), handle bizarre register
4429 translation correctly for single precision format.
4431 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4432 or 'I' operands if the next format specifier is 'M' (fcmp
4433 condition completer).
4435 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4437 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4438 single number giving a bitmask for the MB and ME fields of an M
4439 form instruction. Change NB to accept 32, and turn it into 0;
4440 also turn 0 into 32 when disassembling. Seperated SH from NB.
4441 (insert_mbe, extract_mbe): New functions.
4442 (insert_nb, extract_nb): New functions.
4443 (SC_MASK): Mask out SA and LK bits.
4444 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4445 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4446 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4447 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4448 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4449 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4450 (powerpc_macros): Define table of macro definitions.
4451 (powerpc_num_macros): Define.
4453 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4454 if PPC_OPERAND_NEXT is set.
4456 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4458 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4459 char. Retrieve contents using bfd_getl32 instead of shifting.
4461 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4463 * ppc-opc.c: New file. Opcode table for PowerPC, including
4464 opcodes for POWER (RS/6000).
4465 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4466 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4467 (CFILES): Add ppc-dis.c.
4468 (ppc-dis.o, ppc-opc.o): New targets.
4469 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4471 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4473 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4474 No space before 'u', 'f', or 'N'.
4476 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4478 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4479 farther than we should.
4481 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4483 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4485 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4487 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4489 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4490 needs it, to prevent reading past the end of a section.
4492 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4494 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4495 Removed t,A case for la; always use t,A(b) case.
4497 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4499 From Ted Lemen <mellon@pepper.ncd.com>
4500 * mips-dis.c (print_insn_arg): Handle 'k'.
4501 * mips-opc.c: Make cache use k, not t.
4503 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4505 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4506 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4507 FLOAT_FORMAT_CODE to put out floating point register names.
4509 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4511 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4513 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4515 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4517 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4519 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4520 larger than 32. Moved dsxx32 variants first for disassembler.
4522 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4524 * z8kgen.c, z8k-opc.h: Add full lda information.
4526 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4528 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4529 movb instructions. Any necessary space will be emitted by
4530 the code to handle nullification completers.
4532 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4534 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4536 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4538 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4539 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4541 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4543 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4545 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4547 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4548 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4550 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4552 * m88k-dis.c (m88kdis): comment change. Remove space after
4554 (printop): handle new arg types DEC and XREG for m88110.
4556 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4558 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4559 type for absolute branch addresses. Delete special
4560 "ble" and "be" code in 'W' operand code.
4562 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4564 * mips-opc.c: Set hazard information correctly for branch
4565 likely instructions.
4567 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4569 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4570 info->fprintf_func for printing and info->print_address_func for
4573 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4575 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4577 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4579 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4580 Corrected second case of "b" for disassembler.
4582 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4584 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4585 to BFD swapping routines to correspond to BFD name changes.
4587 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4589 * mips-opc.c: Change div machine instruction to be z,s,t rather
4590 than s,t. Change div macro to be d,v,t rather than d,s,t.
4591 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4592 rem and remu which generates only the corresponding div
4593 instruction. This is for compatibility with the MIPS assembler,
4594 which only generates the simple machine instruction when an
4595 explicit destination of $0 is used.
4596 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4598 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4600 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4601 WR_31 hazard for bal, bgezal, bltzal.
4603 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4605 * hppa-dis.c (print_insn_hppa): Use print function
4606 from within the disassemble_info, not fprintf_filtered.
4608 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4610 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4611 Law, law@cs.utah.edu.)
4613 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4615 * mips-opc.c ("absu"): Removed.
4618 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4620 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4621 Changed hazard information to distinguish between memory load
4622 delays and coprocessor load delays.
4624 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4626 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4628 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4630 * configure.in: Don't pass cpu to config.bfd.
4632 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4634 * m88k-dis.c (m88kdis): Make class unsigned.
4636 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4638 * alpha-dis.c (print_insn_alpha): One branch format case was
4639 missing the instruction name.
4641 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4643 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4644 Add the arch-specific auxiliary files.
4645 (OFILES): Remove the arch-specific auxiliary files
4646 and use BFD_MACHINES instead of DIS_LIBS.
4647 * configure.in: Set BFD_MACHINES based on --with-targets option.
4649 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4651 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4654 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4656 * sparc-opc.c: Change CONST to const to deal with gcc
4657 -Dconst=__const -traditional.
4659 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4661 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4662 coprocessor instructions out of #if 0, and made them use new
4665 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4667 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4669 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4671 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4672 instruction, for use by the disassembler.
4674 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4675 hand-coded sign extensions that depended on 32-bit host ints.
4676 FIXME, we still depend on big-endian host bitfield ordering.
4677 (sparc_print_insn): Set the insn_info_valid field, and the
4678 other fields that describe the instruction being printed.
4680 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4682 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4683 `jmp' instead of just one of them.
4685 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4687 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4688 (fput_fp_reg_r): Renamed from fput_reg_r.
4689 (fput_fp_reg): New function.
4690 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4692 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4694 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4696 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4698 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4700 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4701 don't output a space.
4703 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4705 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4707 * mips-opc.c: New file, containing opcode table from
4708 ../include/opcode/mips.h.
4709 * Makefile.in: Add it.
4711 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4713 * m88k-dis.c: New file, moved in from gdb and changed to use the
4714 new dis-asm.h disassembler interface.
4715 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4716 (m88k-dis.o): New target.
4718 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4720 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4721 argument string const char * to correspond to opcode/mips.h.
4723 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4725 * mips-dis.c: Updated to account for name changes in new version
4727 * Makefile.in: Added header file dependencies.
4729 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4731 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4733 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4735 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4736 extend, rather than shifts.
4738 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4740 * Makefile.in: Undo 15 June change.
4742 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4744 * m68k-dis.c (print_insn_arg): Change return value to byte count
4746 * m68k-dis.c: Re-write to detect invalid operands before
4747 printing anything, so we can handle this the same way we
4748 handle invalid opcodes.
4750 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4752 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4754 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4756 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4759 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4761 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4763 * configure.in: Do make sysdep.h link.
4764 * Makefile.in: Search ../include. Don't search ../bfd.
4766 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4768 Changes from Jeff Law, law@cs.utah.edu:
4769 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4770 Do not print a space before the completers specified by
4773 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4775 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4776 defined, since gdb has been fixed.
4778 Changes from Jeff Law, law@cs.utah.edu:
4779 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4780 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4781 be a *disassemble_info, not a *FILE.
4782 * hppa-dis.c: Support 'd', '!', and 'a'.
4783 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4784 * hppa-dis.c: Delete cases which are no longer needed.
4786 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4788 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4790 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4792 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4795 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4797 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4798 * configure.in: No longer need to configure to get sysdep.h.
4800 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4802 * Patches from Jeffrey Law <law@cs.utah.edu>.
4803 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4804 templates for 1.1 FP computational instructions.
4806 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4808 * h8500-dis.c (print_insn_h8500): Address argument is type
4810 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4813 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4814 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4816 * sparc-dis.c (compare_opcodes): Move static declaration to
4819 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4821 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4822 instruction, remove unimp hack from 'l' argument.
4824 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4826 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4829 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4831 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4832 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4835 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4837 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4838 arrays of string pointers to 2-d arrays of chars, to save
4841 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4843 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4844 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4846 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4848 * hppa-dis.c: New file from Utah, adapted to new disassembler
4850 * Makefile.in: Include it.
4852 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4854 * sh-dis.c, sh-opc.h: New files.
4856 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4858 * alpha-dis.c, alpha-opc.h: New files.
4860 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4862 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4865 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4867 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4869 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4871 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4874 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4876 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4877 and double percent signs a few places.
4879 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4881 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4882 Use info->print_address_func not print_address.
4884 * dis-buf.c (generic_print_address): New function.
4886 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4888 * Makefile.in: Add sparc-dis.c.
4889 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4891 Add `add' instruction to the set that get checked
4892 for a preceding `sethi' in order to print an absolute address.
4893 * (print_insn): Disassembly prefers real instructions.
4894 (is_delayed_branch): Speed up.
4895 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4896 Still missing some float ops, and needs testing.
4897 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4898 F_ALIAS. Use printf, not fprintf, when not passing a file
4900 (compare_opcodes): Check that identical instructions have
4901 identical opcodes, complain otherwise.
4904 * Include reg_names.
4906 Use dis-asm.h/read_memory_func interface.
4908 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4910 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4911 deliberately return non-zero to setjmp from longjmp. Otherwise
4912 this code fails to compile.
4914 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4916 * m68k-dis.c: Fix prototype for fetch_arg().
4918 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4920 * dis-buf.c: New file, for new read_memory_func interface.
4921 Makefile.in (OFILES): Include it.
4922 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4923 Use new read_memory_func interface.
4925 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4927 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4928 * h8500-opc.h: Fix couple of opcodes.
4930 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4932 * Makefile.in: add dvi & installcheck targets
4934 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
4936 * Makefile.in: Update for h8500-dis.c.
4938 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4940 * h8500-dis.c, h8500-opc.h: New files
4942 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
4944 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
4945 ../include/dis-asm.h.
4946 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
4947 and ../gdb/m68k-pinsn.c).
4948 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
4949 and ../gdb/i386-pinsn.c).
4950 * m68881-ext.c: New file. Moved definition of
4951 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
4952 * Makefile.in: Adjust for new files.
4953 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
4954 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
4955 can be dis-assembled.
4957 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4959 * mips-dis.c (print_insn_arg): Now returns void.
4961 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
4963 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
4964 files that use the macros.
4966 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4968 * mips-dis.c: New file, from gdb/mips-pinsn.c.
4969 * Makefile.in (DIS_LIBS): Added mips-dis.o.
4970 (CFILES): Added mips-dis.c.
4972 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4974 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
4975 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
4977 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
4979 * Makefile.in: Improve *clean rules.
4980 * configure.in: Allow a default host.
4982 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4984 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
4985 files include other sysdep files
4987 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
4989 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
4991 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
4993 * configure.in: For host support, use ../bfd/configure.host
4994 so it stays in sync with the ../bfd/hosts database.
4996 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
4998 * configure.in: use cpu-vendor-os triple instead of nested cases
5000 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5002 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5003 *always* the wrong one.
5005 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5007 * z8kgen.c: added copyright info
5009 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5011 * z8k-dis.c (unparse_instr): prettier tabs
5012 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5014 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5016 * configure.in: Add ncr* configuration.
5017 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5018 picayune ANSI compilers happy.
5020 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5022 * configure.in (i386): Make i386 and i486 synonymous for now.
5023 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5025 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5027 * Makefile.in (install): Fix typo.
5029 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5031 * Makefile.in (make): Remove obsolete crud.
5032 (sparc-opc.o): Avoid Sun Make VPATH bug.
5034 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5036 * Makefile.in: since there are no SUBDIRS, remove rule and
5037 references of subdir_do.
5039 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5041 * Makefile.in (install): Get the library name right here too.
5042 Don't install bfd.h, since it's unrelated to this library. No
5043 subdirs to recurse into, either.
5044 (CFILES): The source file has a .c suffix, not .o.
5046 * sparc-opc.c: New file, moved from BFD.
5047 * Makefile.in (OFILES): Build it.
5049 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5051 * z8k-dis.c: fixed forward refferences of some declarations.
5053 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5055 * Makefile.in: get the name of the library right
5057 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5059 * z8k-dis.c: knows how to disassemble z8k stuff
5060 * z8k-opc.h: new file full of z8000 opcodes
5064 version-control: never