1 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
3 * mips-dis.c (print_insn_mips16): Better handling of an extend
4 opcode followed by an instruction which can not be extended.
6 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
8 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
9 coldfire moveb instruction to not allow an address register as
10 destination. Although the documentation does not indicate that
11 this is invalid, experiments uncovered unexpected behavior.
12 Added a comment explaining the situation. Thanks to Andreas
13 Schwab for pointing this out to me.
16 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
18 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
19 entries are presorted so that entries with the same mnemonic are
20 adjacent to each other in the table. Sort the entries for each
21 instruction so that this is true.
24 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
26 * m68k-dis.c: Include <libiberty.h>.
27 (print_insn_m68k): Sort the opcode table on the most significant
31 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
33 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
34 "vsub", "vst", "xnor", and "xor" instructions.
35 (V_a1): Renamed from V_a, msb of accumulator reg number.
36 (V_a0): Add macro, lsb of accumulator reg number.
38 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
40 * tic80-dis.c (print_insn_tic80): Broke excessively long
41 function up into several smaller ones and arranged for
42 the instruction printing function to be callable recursively
43 to print vector instructions that have both a load and a
44 math instruction packed into a single opcode.
45 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
46 to explain why it comes after the other vector opcodes.
49 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
51 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
52 move insns to handle immediate operands.
54 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
56 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
57 fix operand mask in the "moveml" entries for the coldfire.
60 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
62 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
63 New macros for building vector instruction opcodes.
64 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
65 FMT_LI, which were unused. The field is now a flags field.
66 Remove some opcodes that are possible, but illegal, such
67 as long immediate instructions with doubles for immediate
68 values. Add "vadd" and "vld" instructions.
70 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
72 * tic80-opc.c (tic80_operands): Reorder some table entries to make
73 the order more logical. Move the shift alias instructions ("rotl",
74 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
75 interspersed with the regular sr.x and sl.x instructions. Add
76 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
77 "sub", "subu", "swcr", and "trap".
79 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
81 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
82 (OFF_SL_PC): Renamed from OFF_SL.
83 (OFF_SS_BR): New operand type for base relative operand.
84 (OFF_SL_BR): New operand type for base relative operand.
85 (REG_BASE): New operand type for base register operand.
86 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
87 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
88 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
90 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
91 10 char field, padded with spaces on rhs, rather than a string
92 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
93 than old TIC80_OPERAND_RELATIVE. Add support for new
94 TIC80_OPERAND_BASEREL flag bit.
96 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
98 * tic80-dis.c (print_insn_tic80): Print floating point operands
100 * tic80-opc.c (SPFI): Add single precision floating point
101 immediate operand type.
102 (ROTATE): Add rotate operand type for shifts.
103 (ENDMASK): Add for shifts.
104 (n): Macro for the 'n' bit.
105 (i): Macro for the 'i' bit.
106 (PD): Macro for the 'PD' field.
107 (P2): Macro for the 'P2' field.
108 (P1): Macro for the 'P1' field.
109 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
113 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
115 * mn10200-dis.c (disassemble): Mask off unwanted bits after
116 adding in current address for pc-relative operands.
119 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
121 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
122 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
123 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
124 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
125 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
126 REG_BASE_M_SI, REG_BASE_M_LI respectively.
127 (REG_SCALED, LSI_SCALED): New operand types.
128 (E): New macro for 'E' bit at bit 27.
129 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
130 opcodes, including the various size flavors (b,h,w,d) for
131 the direct load and store instructions.
133 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
135 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
137 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
138 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
139 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
140 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
141 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
142 masks with "MASK_* & ~M_*" to get the M bit reset.
143 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
145 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
147 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
148 correctly. Add support for printing TIC80_OPERAND_BITNUM and
149 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
151 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
152 CC, SICR, and LICR table entries.
153 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
154 "bcnd", and "brcr" opcodes.
157 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
159 * ppc-opc.c (powerpc_operands): Make comment match the
160 actual fields (no shift field).
161 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
163 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
164 partial implementation, work in progress.
165 * tic80-opc.c (tic80_operands): Begin construction operands table.
166 (tic80_opcodes): Continue populating opcodes table and start
167 filling in the operand indices.
168 (tic80_num_opcodes): Add this.
171 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
173 * m68k-opc.c: Add #B case for moveq.
175 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
177 * mn10300-dis.c (disassemble): Make sure all variables are initialized
178 before they are used.
181 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
183 * v850-opc.c (v850_opcodes): Put curly-braces around operands
184 for "breakpoint" instruction.
187 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
189 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
190 (dep): Use ALL_CFLAGS rather than CFLAGS.
193 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
195 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
199 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
201 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
203 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
206 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
208 * mips16-opc.c: Add "abs".
211 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
213 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
214 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
215 (disassembler): Add bfd_arch_tic80 support to set disassemble
217 * tic80-dis.c (print_insn_tic80): Add stub.
219 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
221 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
222 * configure: Regenerate with autoconf.
223 * tic80-dis.c: Add file.
224 * tic80-opc.c: Add file.
228 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
230 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
233 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
235 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
236 (mn10200_opcodes): Use it for some logicals and btst insns.
237 Add "break" and "trap" instructions.
239 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
241 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
243 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
245 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
246 relative load or add now depends upon whether the instruction is
249 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
251 * mn10200-dis.c: Finish writing disassembler.
252 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
253 Fix mask for "jmp (an)".
255 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
256 handle endianness issues for mn10300.
258 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
260 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
262 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
263 instruction. Fix opcode field for "movb (imm24),dn".
265 * mn10200-opc.c (mn10200_operands): Fix insertion position
268 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
270 * mn10200-opc.c: Create mn10200 opcode table.
271 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
272 but moving along nicely.
274 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
276 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
278 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
280 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
281 specifiers for fmovem* instructions.
283 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
285 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
287 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
289 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
292 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
294 * mn10300-opc.c: Add some comments explaining the various
297 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
299 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
301 * m68k-dis.c (print_insn_arg): Handle new < and > operand
304 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
305 operand specifiers in fmovm* instructions.
307 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
309 * ppc-opc.c (insert_li): Give an error if the offset has the two
310 least significant bits set.
312 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
314 * mips-dis.c (print_insn_mips16): Separate the instruction from
315 the arguments with a tab, not a space.
317 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
319 * mn10300-dis.c (disasemble): Finish conversion to '$' as
322 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
325 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
327 * configure: Rebuild with autoconf 2.12.
329 Add support for mips16 (16 bit MIPS implementation):
330 * mips16-opc.c: New file.
331 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
332 (mips16_reg_names): New static array.
333 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
334 after seeing a 16 bit symbol.
335 (print_insn_little_mips): Likewise.
336 (print_insn_mips16): New static function.
337 (print_mips16_insn_arg): New static function.
338 * mips-opc.c: Add jalx instruction.
339 * Makefile.in (mips16-opc.o): New target.
340 * configure.in: Use mips16-opc.o for bfd_mips_arch.
341 * configure: Rebuild.
343 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
345 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
346 operand specifiers in *save, *restore and movem* instructions.
348 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
351 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
352 register operands for immediate arithmetic, not, neg, negx, and
353 set according to condition instructions.
355 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
356 specifier of the effective-address operand in immediate forms of
357 arithmetic instructions. The specifier for the immediate operand
358 notes how and where the constant will be stored.
360 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
362 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
365 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
368 * mn10300-dis.c (disassemble): Prefix registers with '%'.
370 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
372 * mn10300-dis.c (disassemble): Handle register lists.
374 * mn10300-opc.c: Fix handling of register list operand for
375 "call", "ret", and "rets" instructions.
377 * mn10300-dis.c (disassemble): Print PC-relative and memory
378 addresses symbolically if possible.
379 * mn10300-opc.c: Distinguish between absolute memory addresses,
380 pc-relative offsets & random immediates.
382 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
384 (disassemble): Handle SPLIT and EXTENDED operands.
386 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
388 * mn10300-dis.c: Rough cut at printing some operands.
390 * mn10300-dis.c: Start working on disassembler support.
391 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
393 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
395 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
398 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
400 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
403 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
405 * mn10300-opc.c (mn10300_opcodes): Demand parens around
406 register argument is calls and jmp instructions.
408 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
410 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
411 getx operand. Fix opcode for mulqu imm,dn.
413 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
415 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
416 in MN10300_OPERAND_SPLIT operands for how many bits
417 appear in the basic insn word. Add IMM32_HIGH24,
418 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
419 (mn10300_opcodes): Use new operands as needed.
421 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
422 for bset, bclr, btst instructions.
423 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
425 * mn10300-opc.c (mn10300_operands): Remove many redundant
426 operands. Update opcode table as appropriate.
427 (IMM32): Add MN10300_OPERAND_SPLIT flag.
428 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
430 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
432 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
433 operands (for indexed load/stores). Fix bitpos for DI
434 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
435 few instructions that insert immediates/displacements in the
436 middle of the instruction. Add IMM8E for 8 bit immediate in
437 the extended part of an instruction.
438 (mn10300_operands): Use new opcodes as appropriate.
441 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
443 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
444 sequential so the assembler never parallelizes it with
448 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
450 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
451 a data/address register that appears in register field 0
452 and register field 1.
453 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
455 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
457 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
458 standard disassembly.
460 * alpha-opc.c (alpha_operands): Rearrange flags slot.
461 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
462 Recategorize PALcode instructions.
465 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
467 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
470 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
472 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
473 there are no operand types.
476 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
478 * v850-opc.c (D9_RELAX): Renamed from D9, all references
480 (v850_operands): Make sure D22 immediately follows D9_RELAX.
483 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
485 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
488 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
490 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
491 and sst.w instructions.
493 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
497 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
499 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
502 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
504 * ppc-opc.c (PPCPWR2): Define.
505 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
508 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
510 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
511 field for movhu instruction.
514 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
515 cast value to "long" not "signed long" to keep hpux10
519 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
521 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
524 * mn10300-opc.c (FMT*): Remove definitions.
526 * mn10300-opc.c (mn10300_opcodes): Fix destination register
527 for shift-by-register opcodes.
529 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
530 into [AD][MN][01] for encoding the position of the register
533 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
535 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
536 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
538 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
540 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
541 Fix various typos. Add "PAREN" operand.
543 (mn10300_opcodes): Surround all memory addresses with "PAREN"
544 operands. Fix several typos.
546 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
549 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
551 * mn10300-opc.c (FMT_XX): Renumber starting at one.
552 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
554 (mn10300_opcodes): Break opcode format out into its own field.
555 Update many operand fields to deal with signed vs unsigned
556 issues. Fix one or two typos in the "mov" instruction
557 opcode, mask and/or operand fields.
559 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
561 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
564 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
566 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
567 all opcodes. Very rough cut at operands for all opcodes.
569 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
572 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
574 * mn10200-opc.c, mn10300-opc.c: New files.
575 * mn10200-dis.c, mn10300-dis.c: New files.
576 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
577 * disassemble.c: Break mn10x00 support into 10200 and 10300
579 * configure.in: Likewise.
580 * configure: Rebuilt.
582 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
584 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
586 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
588 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
590 * disassemble (ARCH_mn10x00): Define.
591 (disassembler): Handle bfd_arch_mn10x00.
592 * configure.in: Recognize bfd_mn10x00_arch.
593 * configure: Rebuilt.
595 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
597 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
598 accordingly. Don't declare functions using op_rtn.
601 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
603 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
604 params to be more standard.
605 * (disassemble): Print absolute addresses and symbolic names for
606 branch and jump targets.
607 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
609 * (v850_opcodes): Add breakpoint insn.
612 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
614 * m68k-opc.c: Move the fmovemx data register cases before the
615 other cases, so that they get recognized before the data register
616 does gets treated as a degenerate register list.
618 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
620 * mips-opc.c: Add a case for "div" and "divu" with two registers
621 and a destination of $0.
623 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
625 * mips-dis.c (print_insn_arg): Add prototype.
626 (_print_insn_mips): Ditto.
628 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
630 * mips-dis.c (print_insn_arg): Print condition code registers as
633 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
635 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
638 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
640 * v850-dis.c (disassemble): Make static. Provide prototype.
642 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
644 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
647 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
649 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
650 ']' characters into the output stream.
651 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
652 Add "memop" field to all opcodes (for the disassembler).
653 Reorder opcodes so that "nop" comes before "mov" and "jr"
656 * v850-dis.c (print_insn_v850): Fix typo in last change.
658 * v850-dis.c (print_insn_v850): Properly handle disassembling
659 a two byte insn at the end of a memory region when the memory
660 region's size is only two byte aligned.
662 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
664 * v850-dis.c (v850_reg_names): Define.
665 (v850_sreg_names, v850_cc_names): Likewise.
666 (disassemble): Very rough cut at printing operands (unformatted).
668 * v850-opc.c (BOP_MASK): Fix.
669 (v850_opcodes): Fix mask for jarl and jr.
671 * v850-dis.c: New file. Skeleton for disassembler support.
672 * Makefile.in Remove v850 references, they're not needed here
673 and they weren't being sanitized away.
674 * configure.in: Add v850-dis.o when building v850 toolchains.
675 * configure: Rebuilt.
676 * disassemble.c (disassembler): Call v850 disassembler.
678 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
679 (insert_d8_6, extract_d8_6): New functions.
680 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
681 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
683 (IF4A, IF4B): Use "D7" instead of "D7S".
684 (IF4C, IF4D): Use "D8_7" instead of "D8".
685 (IF4E, IF4F): New. Use "D8_6".
686 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
687 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
689 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
690 (v850_operands): Change D16 to D16_15, use special insert/extract
691 routines. New new D16 that uses the generic insert/extract code.
692 (IF7A, IF7B): Use D16_15.
693 (IF7C, IF7D): New. Use D16.
694 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
696 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
697 message. Issue an error if the branch offset is odd.
699 * v850-opc.c: Add notes about needing special insert/extract
700 for all the load/store insns, except "ld.b" and "st.b".
702 * v850-opc.c (insert_d22, extract_d22): New functions.
703 (v850_operands): Use insert_d22 and extract_d22 for
705 (insert_d9): Fix range check.
707 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
709 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
710 and set bits field to D9 and D22 operands.
712 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
714 * v850-opc.c (v850_operands): Define SR2 operand.
715 (v850_opcodes): "ldsr" uses R1,SR2.
717 * v850-opc.c (v850_opcodes): Fix opcode specs for
718 sld.w, sst.b, sst.h, sst.w, and nop.
720 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
722 * v850-opc.c (v850_opcodes): Add null opcode to mark the
723 end of the opcode table.
727 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
729 * d10v-opc.c (pre_defined_registers): Added register pairs,
730 "r0-r1", "r2-r3", etc.
734 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
736 * v850-opc.c (v850_operands): Make I16 be a signed operand.
737 Create I16U for an unsigned 16bit mmediate operand.
738 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
740 * v850-opc.c (v850_operands): Define EP operand.
741 (IF4A, IF4B, IF4C, IF4D): Use EP.
743 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
744 with immediate operand, "movhi". Tweak "ldsr".
746 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
747 correct. Get sld.[bhw] and sst.[bhw] closer.
749 * v850-opc.c (v850_operands): "not" is a two byte insn
751 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
753 * v850-opc.c (v850_operands): D16 inserts at offset 16!
755 * v850-opc.c (two): Get order of words correct.
757 * v850-opc.c (v850_operands): I16 inserts at offset 16!
759 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
760 register source and destination operands.
761 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
763 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
764 same thinko in "trap" opcode.
766 * v850-opc.c (v850_opcodes): Add initializer for size field
769 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
770 Add D8 for 8-bit unsigned field in short load/store insns.
771 (IF4A, IF4D): These both need two registers.
772 (IF4C, IF4D): Define. Use 8-bit unsigned field.
773 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
774 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
775 for "ldsr" and "stsr".
776 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
779 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
780 short store word (sst.w).
782 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
784 * v850-opc.c (v850_operands): Added insert and extract fields,
785 pointers to functions that handle unusual operand encodings.
787 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
789 * v850-opc.c (v850_opcodes): Enable "trap".
791 * v850-opc.c (v850_opcodes): Fix order of displacement
792 and register for "set1", "clr1", "not1", and "tst1".
794 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
796 * v850-opc.c (v850_operands): Add "B3" support.
797 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
800 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
802 * v850-opc.c: Close unterminated comment.
804 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
806 * v850-opc.c (v850_operands): Add flags field.
807 (v850_opcodes): add move opcodes.
809 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
811 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
812 * configure: (bfd_v850v_arch) Add new case.
813 * configure.in: (bfd_v850_arch) Add new case.
814 * v850-opc.c: New file.
817 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
819 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
822 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
824 * d10v-opc.c: Add additional information to the opcode
825 table to help determinine which instructions can be done
829 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
831 * mpw-make.sed: Update editing of include pathnames to be
834 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
836 * arm-opc.h: Added "bx" instruction definition.
838 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
840 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
843 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
845 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
847 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
849 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
852 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
854 * makefile.vms: Update for alpha-opc changes.
856 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
858 * i386-dis.c (print_insn_i386): Actually return the correct value.
859 (ONE, OP_ONE): #ifdef out; not used.
862 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
864 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
865 Changed subi operand type to treat 0 as 16.
868 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
870 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
873 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
875 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
876 memory transfer instructions. Add new format string entries %h and %s.
877 * arm-dis.c: (print_insn_arm): Provide decoding of the new
881 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
883 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
884 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
887 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
889 * alpha-dis.c (print_insn_alpha_osf): Remove.
890 (print_insn_alpha_vms): Remove.
891 (print_insn_alpha): Make globally visible. Chose the register
892 names based on info->flavour.
893 * disassemble.c: Always return print_insn_alpha for the alpha.
896 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
898 * d10v-dis.c (dis_long): Handle unknown opcodes.
900 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
902 * d10v-opc.c: Changes to support signed and unsigned numbers.
903 All instructions with the same name that have long and short forms
904 now end in ".l" or ".s". Divs added.
905 * d10v-dis.c: Changes to support signed and unsigned numbers.
907 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
909 * d10v-dis.c: Change all functions to use info->print_address_func.
912 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
914 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
915 move ccr/sr insns more strict so that the disassembler only
916 selects them when the addressing mode is data register.
919 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
920 * d10v-opc.c (pre_defined_registers): Declare.
921 * d10v-dis.c (print_operand): Now uses pre_defined_registers
922 to pick a better name for the registers.
925 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
927 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
928 operands for fexpand and fpmerge. From Christian Kuehnke
929 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
931 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
933 * alpha-dis.c (print_insn_alpha): No longer the user-visible
934 print routine. Take new regnames and cpumask arguments.
935 Kill the environment variable nonsense.
936 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
937 (print_insn_alpha_vms): New function. Do VMS style regnames.
938 * disassemble.c (disassembler): Test bfd flavour to pick
939 between OSF and VMS routines. Default to OSF.
941 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
943 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
944 * configure: Rebuild.
945 * Makefile.in (install): Use @INSTALL_SHLIB@.
948 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
950 * configure: (bfd_d10v_arch) Add new case.
951 * configure.in: (bfd_d10v_arch) Add new case.
952 * d10v-dis.c: New file.
953 * d10v-opc.c: New file.
954 * disassemble.c (disassembler) Add entry for d10v.
957 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
959 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
960 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
962 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
964 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
965 distinguish between variants of the instruction set.
966 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
967 distinguish between variants of the instruction set.
969 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
971 * i386-dis.c (print_insn_i8086): New routine to disassemble using
972 the 8086 instruction set.
973 * i386-dis.c: General cleanups. Make most things static. Add
974 prototypes. Get rid of static variables aflags and dflags. Pass
975 them as args (to almost everything).
977 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
979 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
981 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
983 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
984 if the next arg is marked with SRC_IN_DST. Gross.
986 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
987 we're looking for and find EXR.
989 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
990 if we're looking for KBIT and we don't find it.
992 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
995 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
996 3bit immediate operands.
998 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1000 * Released binutils 2.7.
1002 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1003 <kkaempf@progis.ac-net.de>.
1005 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1007 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1009 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1011 * sparc-dis.c (print_insn_sparclite): New routine to print
1012 sparclite instructions.
1014 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1016 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1018 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1020 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1021 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1022 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1024 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1026 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1027 Use autoconf-set values.
1028 (docdir, oldincludedir): Removed.
1029 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1031 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1033 * alpha-opc.c: New file.
1034 * alpha-opc.h: Remove.
1035 * alpha-dis.c: Complete rewrite to use new opcode table.
1036 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1037 * configure: Rebuild with autoconf 2.10.
1038 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1039 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1041 (alpha-opc.o): New target.
1043 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1045 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1046 Set imm_added_to_rs1 even if the source and destination register
1049 * sparc-opc.c: Add some two operand forms of the wr instruction.
1051 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1053 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1056 * disassemble.c (disassembler): Handle H8/S.
1057 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1059 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1061 * sparc-opc.c: Add beq/teq as aliases for be/te.
1063 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1064 <sergei@msil.sps.mot.com>.
1066 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1068 * makefile.vms: New file.
1070 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1072 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1074 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1077 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1079 * i386-dis.c (OP_OFF): Call append_prefix.
1081 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1083 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1084 unsigned long to silence a warning from the Solaris PowerPC
1087 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1089 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1091 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1093 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1095 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1096 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1097 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1098 cpush, cpusha, cpull sparclet insns.
1100 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1102 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1104 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1106 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1107 Set F_FLOAT on other floating point instructions.
1109 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1111 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1113 (powerpc_opcodes): Add 860/821 specific SPRs.
1115 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1117 * configure.in: Permit --enable-shared to specify a list of
1118 directories. Set and substitute BFD_PICLIST.
1119 * configure: Rebuild.
1120 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1121 uses. Set to @BFD_PICLIST@.
1123 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1125 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1126 not "abs", which may be needed for the absolute in something
1127 like btst #0,@10:8. Print L_3 immediates separately from other
1128 immediates. Change ABSMOV reference to ABS8MEM.
1130 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1132 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1133 (current_arch_mask): New static global.
1134 (compute_arch_mask): New static function.
1135 (print_insn_sparc): Delete sparc_v9_p. New static local
1136 current_mach. Resort opcode table if current_mach changes.
1137 Generalize "insn not supported" test.
1138 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1139 Delete test for v9/!v9.
1140 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1142 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1143 (brfcx): Renamed to FBRX.
1144 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1145 coprocessor mnemonics are not supported on the sparclet).
1146 (condf): Renamed to CONDF.
1147 (SLCBCC2): Delete F_ALIAS flag.
1149 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1151 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1152 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1154 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1156 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1157 that the shared library version number is set correctly.
1159 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1161 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1162 Miles Bader <miles@gnu.ai.mit.edu>.
1163 * configure: Rebuild.
1165 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1167 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1170 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1172 * configure: Rebuild with autoconf 2.8.
1174 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1176 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1177 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1179 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1181 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1182 since they appear as targets in Makefile.in.
1183 * configure: Rebuild.
1185 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1187 * mpw-make.sed: Edit out shared library support bits.
1189 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1191 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1192 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1193 (sparc_opcodes): Add sparclet insns.
1194 (sparclet_cpreg_table): New static local.
1195 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1196 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1198 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1200 * i386-dis.c (index16): New static variable.
1201 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1203 (OP_indirE): Return result of OP_E.
1204 (OP_E): Check for 16 bit addressing mode, and disassemble
1205 correctly. Optimised 32 bit case a little. Don't print
1206 "(base,index,scale)" when sib specifies only an offset.
1208 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1210 * configure.in: Set and substitute SHLIB_DEP.
1211 * configure: Rebuild.
1212 * Makefile.in (SHLIB_DEP): New variable.
1213 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1214 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1215 COMMON_SHLIB, add them to piclist with appropriate modifications.
1216 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1217 here: just use piclist.
1219 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1221 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1222 (print_insn_sparc): Rewrite v9/not-v9 tests.
1223 (compare_opcodes): Likewise.
1224 * sparc-opc.c (MASK_<ARCH>): Define.
1225 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1226 (sparclet,v6notv9): Define.
1227 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1228 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1230 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1232 * configure.in: Call AC_PROG_CC before configure.host.
1233 * configure: Rebuild.
1235 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1237 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1239 * i386-dis.c (onebyte_has_modrm): New static array.
1240 (twobyte_has_modrm): New static array.
1241 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1243 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1245 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1248 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1250 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1253 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1255 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1256 m68010up, not just m68020up | cpu32.
1258 * Makefile.in (SONAME): New variable.
1259 ($(SHLINK)): Make a link to the transformed name, as well.
1260 (stamp-tshlink): New target.
1261 (install): Skip stamp-tshlink during install.
1263 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1265 * configure.in: Call AC_ARG_PROGRAM.
1266 * configure: Rebuild.
1267 * Makefile.in (program_transform_name): New variable.
1268 (install): Transform library name before installing it.
1270 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1272 * i960-dis.c (mem): Add HX dcinva instruction.
1274 Support for building as a shared library, based on patches from
1275 Alan Modra <alan@spri.levels.unisa.edu.au>:
1276 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1277 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1278 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1279 * configure: Rebuild.
1280 * Makefile.in (ALLLIBS): New variable.
1281 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1282 (COMMON_SHLIB, SHLINK): New variables.
1283 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1284 (STAGESTUFF): Remove variable.
1285 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1286 (stamp-piclist, piclist): New targets.
1287 ($(SHLIB), $(SHLINK)): New targets.
1288 ($(OFILES)): Depend upon stamp-picdir.
1289 (disassemble.o): Build twice if PICFLAG is set.
1290 (MOSTLYCLEAN): Add pic/*.o.
1291 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1292 (distclean): Remove pic and stamp-picdir.
1293 (install): Install shared libraries.
1294 (stamp-picdir): New target.
1296 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1298 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1299 Print unknown instruction as "unknown", rather than in hex.
1301 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1303 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1305 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1307 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1309 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1311 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1312 when necessary. From Ulrich Drepper
1313 <drepper@myware.rz.uni-karlsruhe.de>.
1315 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1317 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1318 sparc_num_opcodes. Update architecture enum values.
1319 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1320 (sparc_opcode_lookup_arch): New function.
1321 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1322 (sparc_opcodes): Add v9a shutdown insn.
1324 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1326 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1327 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1329 (print_insn_sparc64): Deleted.
1330 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1333 * sparc-opc.c (architecture_pname): Add v9a.
1335 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1337 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1338 incorrectly defined as 0x16 when it should be 0x15.
1339 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1340 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1341 excb (exception barrier) which is defined in the Alpha
1342 Architecture Handbook version 2.
1343 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1344 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1345 disassembled as or, for example.
1347 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1349 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1350 (_print_insn_mips): Change i from int to unsigned int.
1352 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1354 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1355 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1357 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1359 * i386-dis.c: Added Pentium Pro instructions.
1361 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1363 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1366 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1368 * sh-opc.h (sh_nibble_type): Added REG_B.
1369 (sh_arg_type): Added A_REG_B.
1370 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1372 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1374 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1376 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1378 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1380 * Makefile.in (distclean): Remove stamp-h. From Ronald
1381 F. Guilmette <rfg@monkeys.com>.
1383 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
1385 From David Mosberger-Tang <davidm@azstarnet.com>:
1386 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
1389 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1391 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
1392 (sh_table): Added many SH3 opcodes.
1393 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
1395 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1397 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
1398 (subco,subco.): Mark this PPC, not PPCCOM.
1400 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
1402 * configure: Rebuild with autoconf 2.7.
1404 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
1406 * configure: Rebuild with autoconf 2.6.
1408 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
1410 * configure.in: Sort list of architectures. Accept but do nothing
1411 for alliant, convex, pyramid, romp, and tahoe.
1413 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
1415 * a29k-dis.c (print_special): Change num to unsigned int.
1417 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
1419 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
1422 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
1424 * configure.in: Call AC_CHECK_PROG to find and cache AR.
1425 * configure: Rebuilt.
1427 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
1429 * configure.in: Add case for bfd_i860_arch.
1430 * configure: Rebuild.
1432 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
1434 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
1435 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
1436 (NEXTDOUBLE): Likewise.
1437 (print_insn_m68k): Don't match fmoveml if there is more than one
1438 register in the list.
1439 (print_insn_arg): Handle a place of '8' for a type of 'L'.
1441 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
1443 * m68k-opc.c: Use #W rather than #w.
1444 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
1446 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
1448 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
1449 and likewise for all the dbxx opcodes.
1451 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
1453 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
1455 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
1457 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
1458 the VR4100 specific instructions to the mips_opcodes structure.
1460 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
1462 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
1463 ugly Metrowerks bug in CW6, is fixed in CW7.
1465 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1467 * ppc-opc.c (whole file): Add flags for common/any support.
1469 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
1471 * Makefile.in (BISON): Remove macro.
1472 (FLAGS_TO_PASS): Remove BISON.
1474 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
1476 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1478 * m68k-dis.c (print_insn_m68k): Recognize all two-word
1479 instructions that take no args by looking at the match mask.
1480 (print_insn_arg): Always print "%" before register names.
1481 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
1482 [case '_']: Don't print "@#" before address.
1483 [case 'J']: Use "%s" as format string, not register name.
1484 [case 'B']: Treat place == 'C' like 'l' and 'L'.
1486 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
1488 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
1491 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
1493 From David Mosberger-Tang <davidm@azstarnet.com>
1495 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
1496 (alpha_insn_set): added definitions for VAX floating point
1497 instructions (Unix compilers don't generate these, but handcoded
1498 assembly might still use them).
1500 * alpha-dis.c (print_insn_alpha): added support for disassembling
1501 the miscellaneous instructions in the Alpha instruction set.
1503 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
1505 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
1506 no longer create sysdep.h, sed ppc-opc.c to work around a
1507 serious Metrowerks C bug.
1508 * mpw-make.in: Remove.
1509 * mpw-make.sed: New file, used by mpw-configure to edit
1510 Makefile.in into an MPW makefile.
1512 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
1514 * Makefile.in (maintainer-clean): New synonym for realclean.
1516 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
1518 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
1519 which use '0', '1', and '2' instead. Specify the proper size for
1520 a pmove immediate operand. Correct the pmovefd patterns to be
1521 moves to a register, not from a register.
1522 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
1524 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
1526 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
1527 %psr, %wim, %tbr as F_NOTV9.
1529 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
1531 * Makefile.in (Makefile): Just rebuild Makefile when running
1533 (config.h, stamp-h): New targets.
1534 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
1535 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
1536 rebuilding config.h.
1537 * configure: Rebuild.
1539 * mips-opc.c: Change unaligned loads and stores with "t,A"
1540 operands to use "t,A(b)".
1542 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1544 * sh-dis.c (print_insn_shx): Add F_FR0 support.
1546 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1548 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
1549 until 3 instead of until 2.
1551 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
1553 * Makefile.in (ALL_CFLAGS): Define.
1554 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
1555 (MOSTLYCLEAN): Add config.log.
1556 (distclean): Don't remove config.log.
1557 * configure.in: Substitute HDEFINES.
1558 * configure: Rebuild.
1560 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1562 * sh-opc.h (sh_arg_type): Add F_FR0.
1563 (sh_table, case fmac): Add F_FR0 as first argument.
1565 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1567 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
1569 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
1571 * sparc-dis.c: Remove all references to NO_V9.
1573 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
1575 * aclocal.m4: Just include ../bfd/aclocal.m4.
1576 * configure: Rebuild.
1578 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
1580 * sparc-dis.c (X_DISP19): Define.
1581 (print_insn, case 'G'): Use it.
1582 (print_insn, case 'L'): Sign extend displacement.
1584 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
1586 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
1587 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
1588 host_makefile_frag or frags.
1589 * aclocal.m4: New file.
1590 * configure: Rebuild.
1591 * Makefile.in (INSTALL): Set to @INSTALL@.
1592 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
1593 (INSTALL_DATA): Set to @INSTALL_DATA@.
1595 (AR_FLAGS): Set to rc rather than qc.
1596 (CC): Define as @CC@.
1597 (CFLAGS): Set to @CFLAGS@.
1598 (@host_makefile_frag@): Remove.
1599 (config.status): Remove dependency upon @frags@.
1601 * configure.in: ../bfd/config.bfd now just sets shell variables.
1602 Use them rather than looking through target Makefile fragments.
1603 * configure: Rebuild.
1605 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1607 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
1609 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
1611 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
1612 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
1615 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
1616 (lookup_{name,value}): New functions.
1617 (prefetch_table): New static local.
1618 (sparc_{encode,decode}_prefetch): New functions.
1619 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
1621 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1623 * sh-opc.h: Add blank lines to improve readabililty of sh3e
1626 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1628 * sh-dis.c: Correct comment on first line of file.
1630 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
1632 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
1634 * sparc-opc.c (asi, membar): New static locals.
1635 (sparc_{encode,decode}_{asi,membar}): New functions.
1636 (sparc_opcodes, membar insn): Fix.
1637 * sparc-dis.c (print_insn): Call sparc_decode_asi.
1638 Support decoding of membar masks.
1641 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
1643 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
1645 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
1647 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
1648 and likewise for the other branches. Add bhs as an alias for bcc,
1649 and likewise for the size variants. Add dbhs as an alias for
1652 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
1654 * sh-opc.h (FP sts instructions): Update to match reality.
1656 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
1658 * m68k-dis.c: (fpcr_names): Add % before all register names.
1659 (reg_names): Likewise.
1660 (print_insn_arg): Don't explicitly print % before register names.
1661 Add % before register names in static array names. In case 'r',
1662 print data registers as `@(Dn)', not `Dn@'. When printing a
1663 memory address, don't print @# before it.
1664 (print_indexed): Change base_disp and outer_disp from int to
1665 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
1666 syntax. Sign extend 8 byte displacement correctly.
1667 (print_base): Print using MIT syntax. Print zpc when appropriate.
1668 Change parameter disp from int to bfd_vma.
1670 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
1673 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
1675 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
1676 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
1677 * sh-opc.h (sh_arg_type): Add new operand types.
1678 (sh_table): Add new opcodes from SH3E Floating Point ISA.
1680 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1682 * Makefile.in (distclean): Remove generated file config.h.
1684 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
1686 * Makefile.in (distclean): Remove generated file config.h.
1688 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
1690 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
1692 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
1694 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
1695 rather than numopcodes. Use m68k_opcodes rather than removed
1696 opcode function. Don't check F_ALIAS.
1697 (print_insn_arg): Change first parameter to be const char *.
1698 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
1699 (m68k-opc.o): New target.
1700 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
1701 * configure: Rebuild.
1703 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
1705 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
1706 (opcode_bits, opcode_hash_table): New variables.
1707 (opcodes_initialized): Renamed from opcodes_sorted.
1708 (build_hash_table): New function.
1709 (is_delayed_branch): Use hash table.
1710 (print_insn): Renamed from print_insn_sparc, made static.
1711 Build and use hash table. If !sparc64, ignore sparc64 insns,
1712 and vice-versa if sparc64.
1713 (print_insn_sparc, print_insn_sparc64): New functions.
1714 (compare_opcodes): Move sparc64 opcodes to end.
1715 Print commutative insns with constant second.
1716 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
1718 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
1720 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
1721 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
1722 avoids printing a delay slot in a delay slot.
1723 * sh-opc.h (sh_table): Fully bracket last entry.
1725 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
1727 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
1729 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
1731 * configure.in: Get host_makefile_frag from ${srcdir}.
1733 * configure.in: Autoconfiscated. Check for string[s].h. Create
1734 config.h from config.in. Don't set up sysdep.h link.
1735 * sysdep.h: New file.
1736 * configure, config.in: New files, generated from configure.in.
1737 * Makefile.in: Updated to be processed autoconf-style.
1738 (distclean): Keep sysdep.h. Remove config.log and config.cache.
1739 (Makefile): Depend on config.status.
1740 (config.status): New rule.
1741 * configure.bat: Update Makefile substitutions.
1743 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
1745 * mips-opc.c (L1): Define.
1746 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
1747 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
1750 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
1752 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
1753 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
1754 have multiple add units but only a single logical unit.
1756 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
1757 shifted by 18, without any insertion or extraction function.
1758 (insert_cr, extract_cr): Remove.
1761 Mon Jul 3 11:54:31 1995 Ian Lance Taylor <ian@cygnus.com>
1763 * Makefile.in (ALL_MACHINES): Add arc-dis.o and arc-opc.o.
1766 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1768 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
1771 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
1773 * mpw-config.in: Add sh and i386 configs, remove sparc config.
1774 * sh-opc.h: Add copyright.
1776 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
1778 * Makefile.in (crunch-m68k): Delete extra target accidentally
1779 checked in a while ago.
1781 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
1783 * sh-opc.h (sh_table): Add SH3 support.
1785 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
1787 * sh-opc.h: Added bsrf and braf.
1789 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
1791 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
1792 bogus [ls]fm{ea,fd} patterns.
1794 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
1795 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
1796 initialize it from memory. Make function static.
1797 (print_insn_{big,little}_arm): New functions.
1798 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
1799 the correct endianness.
1802 Sat Apr 29 23:20:05 1995 Doug Evans <dje@chestnut.cygnus.com>
1804 * arc-opc.c (arc_opcodes): Add ARC_OPCODE_CONDITIONAL_BRANCH flag.
1805 (arc_suffixes): Use ARC_DELAY_{NONE,NORMAL,JUMP}.
1808 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
1810 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
1813 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1815 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
1816 17th, so that it builds again using GCC as the compiler.
1818 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1820 * mips-dis.c (print_insn_little_mips): Cast return value from
1821 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
1822 expects an unsigned long, and that might be fewer words of
1823 argument storage (e.g., if bfd_vma is long long on a 32-bit
1825 (print_insn_big_mips): Likewise with bfd_getb32 value.
1826 (_print_insn_mips): Now static.
1828 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
1830 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
1831 gcc memory hog problem with initializer is fixed.
1834 Wed Apr 12 09:04:12 1995 Doug Evans <dje@canuck.cygnus.com>
1836 * arc-opc.c (NULL): Define.
1837 (arc_operands, insn fields u,s): Delete.
1838 (arc_operands, insn fields a,b,c): Mark as signed.
1839 (arc_opcodes): No longer const, links computed at run-time.
1840 (arc_opcodes, mac/mul insns): Breakout suffixes as we don't handle
1841 suffixes that affect the insn code.
1842 (arc_opcodes): Resort table to macros are first.
1843 (arc_opcodes, ld [b,c] entry): Add %Q to prevent shimms.
1844 (arc_opcodes, st [b] entry): Likewise.
1845 (arc_opcodes, st [b,d] entry): Fix mask, value.
1846 (arc_reg_names): Add entries for r29, r30, r31, r60.
1847 (opcode_map, icode_map): New static globals.
1848 (arc_opcode_init_tables): Initialize them.
1849 (arc_opcode_lookup_asm, arc_opcode_lookup_dis): New functions.
1850 (insert_shimmoffset): Signal error if register present.
1852 * arc-dis.c (print_insn): Call arc_opcode_lookup_dis.
1855 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
1857 Merge in support for Mac MPW as a host.
1858 (Old change descriptions retained for informational value.)
1860 * mpw-config.in (archname): Compute from the config.
1861 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
1863 * mpw-config.in (target_arch): Compute from canonical target.
1864 (m68k, mips, powerpc, sparc): Add architectures.
1865 * mpw-make.in (disassemble.c.o): Add.
1866 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
1868 * mpw-config.in (BFD_MACHINES): Set to a default value.
1869 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
1871 * mpw-make.in (CSEARCH): Add extra-include to search path.
1873 * mpw-config.in (varargs.h): Don't create.
1874 (sysdep.h): Create using forward-include.
1875 * mpw-make.in (CSEARCH): Add include/mpw to search path.
1877 * mpw-config.in: New file, MPW version of configure.in.
1878 * mpw-make.in: New file, MPW version of Makefile.in.
1881 Thu Apr 6 20:36:08 1995 Doug Evans <dje@chestnut.cygnus.com>
1883 * arc-dis.c (print_insn): New parameter `big_p'. Callers updated.
1884 Call arc_get_opcode_mach to map bfd mach number to opcode value.
1885 (print_insn_*): Pass bfd mach number, not opcode version.
1886 * arc-opc.c (arc_get_opcode_mach): New function.
1889 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1891 * alpha-dis.c (print_insn_alpha): Put empty statement after
1894 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
1896 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
1897 (low_sign_extend): Likewise.
1898 (get_field): Delete unused function.
1899 (set_field, deposit_14, deposit_21): Likewise.
1901 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1903 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
1906 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
1908 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
1910 * alpha-opc.h (OSF_ASMCODE): define
1911 print pal-code names as defined in App C of the
1912 Alpha Architecture Reference Manual
1914 * alpha-dis.c: cleaned up output
1915 print stylized code forms as defined in App A.4.3 of the
1916 Alpha Architecture Reference Manual
1918 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
1920 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
1922 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
1925 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
1927 * m68k-dis.c (opcode): New function. Returns address of opcode
1928 table entry given index, even if the opcode table was split to
1929 work around gcc bugs.
1930 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
1932 (BREAK_UP_BIG_DECL): Make secondary array static and const.
1933 (reg_names): Now const.
1934 (print_insn_arg): Arrays cacheFieldName and names now const.
1935 (print_indexed): Array scales now const.
1938 Tue Mar 7 21:14:14 1995 Doug Evans <dje@chestnut.cygnus.com>
1940 * arc-dis.c (print_insn_arc_base): Split into big and little fns.
1941 (print_insn_arc_{host,graphics,audio}): Likewise.
1942 (print_insn): Add prototype.
1943 (arc_get_disassembler): New arg `big_p'. Return little or big
1944 print fn accordingly.
1945 * arc-opc.c (arc_opcode_init_tables): Init arc_operand_map once.
1946 (arc_opcode_supported): Use ARC_OPCODE_CPU to ignore byte order.
1947 (arc_opval_supported): Likewise.
1948 * disassemble.c (disassembler): Pass big endian flag to
1949 arc_get_disassembler.
1952 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
1954 * ppc-opc.c: Sort recently added instructions by minor opcode
1955 number within major opcode number.
1957 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
1959 * hppa-dis.c: Include libhppa.h.
1961 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
1963 * mips-opc.c: Change dli to use M_DLI, and add dla.
1965 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1967 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
1970 Fri Feb 17 12:42:25 1995 Doug Evans <dje@chestnut.cygnus.com>
1972 * arc-dis.c (arc_get_disassembler): Change argument to int,
1973 one of bfd_mach_arc_xxx. All callers updated.
1976 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
1978 * mips-opc.c: Add r4650 mul instruction.
1980 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
1982 * mips-opc.c: Add uld and usd macros for unaligned double load and
1985 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1987 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
1988 mfdcr, mtdcr, icbt, iccci.
1991 Mon Feb 13 11:09:17 1995 Doug Evans <dje@canuck.cygnus.com>
1993 * arc-dis.c (print_insn): Handle ARC_OPERAND_ADDRESS.
1994 * arc-opc.c (arc_operands): New operand 'J' for jump addresses.
1995 ('L' operand): Mark as ARC_OPERAND_ADDRESS.
1996 (arc_opcodes, j insn): Use 'J' operand type, not 'L'.
1997 (arc_opcodes, ld/st insns): Fix address writeback operand letter.
1998 (insert_absaddr): New function.
2000 Thu Feb 9 19:19:23 1995 Doug Evans <dje@canuck.cygnus.com>
2002 * arc-dis.c (print_insn_arc): Rename to print_insn and make static.
2003 New argument `cpu', pass it to arc_opcode_init_tables.
2004 Document byte order dependencies. Ignore unsupported insns.
2005 (arc_get_disassembler): New function.
2006 (print_insn_arc_base, print_insn_arc_host, print_insn_arc_graphics,
2007 print_insn_arc_audio): New functions.
2008 * arc-opc.c (MULTSHIFT operand): Delete.
2009 (UNSIGNED, SATURATION): New operands.
2010 (mac, mul, mul64, mulu64): New insns.
2011 (ext. asl, asr, lsr, ror): Only available on host and graphics cpus.
2012 (padc, padd, pmov, pand, psbc, psub, swap): New insns.
2013 (host,graphics,audio extended and auxiliary regs): Define.
2014 (ss, sc, mh, ml): New suffixes.
2015 (arc_opcode_supported, arc_opval_supported): New functions.
2016 (insert_multshift, extract_multshift): Deleted.
2017 * disassemble.c (disassembler, case bfd_arch_arc): Call
2018 arc_get_disassembler to get disassembler routine.
2021 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2023 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2024 signed char fields to shorts, more portable.
2026 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2028 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2029 char fields as signed chars, since they may have negative values.
2031 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2033 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2034 (mycroft@netbsd.org).
2036 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2038 From "Logg, Ed" <elogg@ea.com>:
2039 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2040 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2043 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2045 * ppc-opc.c: Changes based on patch from David Edelsohn
2046 <edelsohn@mhpcc.edu>.
2047 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2050 (insert_tbr): New static function.
2051 (extract_tbr): New static function.
2052 (XFXFXM_MASK, XFXM): Define.
2053 (XSPRBAT_MASK, XSPRG_MASK): Define.
2054 (powerpc_opcodes): Add instructions to access special registers by
2055 name. Add mtcr and mftbu.
2057 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2059 * mips-opc.c (P3): Define.
2060 (mips_opcodes): Add mad and madu.
2062 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2064 * configure.in: Add W65 support.
2065 * disassemble.c: Likewise.
2066 * w65-opc.h, w65-dis.c: New files.
2068 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2070 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2074 Tue Dec 20 10:36:55 1994 Doug Evans <dje@canuck.cygnus.com>
2076 * arc-dis.c (print_insn_arc): Branch offsets are relative to delay
2078 * arc-opc.c (extract_reladdr): New function.
2079 (insert_reladdr): Store address right-shifted by 2.
2082 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2084 * mips-opc.c: Add dli as a synonym for li.
2087 Mon Dec 19 12:35:51 1994 Doug Evans <dje@canuck.cygnus.com>
2089 * arc-opc.c (insertion fns): Pass pointer to value's table entry.
2091 (extraction fns): Insn argument now array of two words. Return pointer
2092 to value's table entry. All uses changed.
2093 (arc_opcode_lookup_suffix): Exported for arc-dis.c.
2094 (insert_multshift, extract_multshift): New fns.
2095 (arc_operands): Add support for cache bypass suffix. Add support for
2096 predefined aux regs. Modifier bits moved to flags field.
2097 (arc_opcodes): Likewise.
2098 Add mul/mulu/shift insns. Syntax of zero/sign extension insns changed.
2099 New insn rlc. Update to syntax in programmer's manual.
2100 (arc_reg_names): Fix typo in lp_count. Add predefined aux regs.
2101 (arc_suffixes): New synonyms lo,hs for cs,cc. New suffix for cache
2103 (arc_opcode_init_tables): New argument to indicate cpu type.
2104 (insert_reg): Handle predefined aux regs.
2105 (extract_reg): Likewise.
2106 (lookup_register): New fn.
2107 * arc-dis.c (arc_condition_codes): Deleted.
2108 (print_insn_arc): Handle insns with 32 bit immediate constants better.
2109 Clean up modifier handling. Handle predefined aux regs.
2112 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2114 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2115 print something for reserved opcode values, even if it won't
2118 * mips-dis.c (_print_insn_mips): When initializing, shift right
2119 and mask, to avoid sign extension problems on the Alpha.
2121 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2125 Tue Nov 29 18:02:43 1994 Doug Evans <dje@canuck.cygnus.com>
2127 * configure.in: Add ARC support.
2128 * disassemble.c: Likewise.
2129 * arc-dis.c, arc-opc.c: New files.
2132 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2134 * sh-opc.h (mov.l gbr): Get direction right.
2135 * sh-dis.c (print_insn_shx): New function.
2136 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2137 print opcodes with right byte order.
2139 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2141 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2142 to avoid conflicts with getopt.
2144 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2146 * hppa-dis.c (print_insn_hppa): Read the instruction using
2147 bfd_getb32, so that it works on a little endian or 64 bit host.
2148 Remove unused local variable op.
2150 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2152 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2153 addu does not work correctly if -mips3.
2155 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2157 * a29k-dis.c (print_special): Add special register names defined
2158 on 29030, 29040 and 29050.
2159 (print_insn): Handle new operand type 'I'.
2161 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2163 * Makefile.in (INSTALL): Use top level install.sh script.
2165 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2167 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2168 that it works on a little endian host.
2170 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2172 * configure.in: Use ${config_shell} when running config.bfd.
2174 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2176 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2178 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2180 * a29k-dis.c (print_insn): Print the opcode.
2182 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2184 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2186 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2188 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2190 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2192 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2193 which store a value into memory.
2195 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2197 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2198 * arm-dis.c, arm-opc.h: New files.
2200 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2202 * Makefile.in (ns32k-dis.o): Add dependency.
2203 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2204 string, not as array of chars.
2206 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2208 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2210 * sparc-opc.c: Added sparclite extended FP operations, and
2211 versions of v9 impdep* instructions permitting specification of
2214 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2216 * i960-dis.c (reg_names): Now const.
2217 (struct sparse_tabent): New type, copied from array type in mem
2219 (ctrl): Local static array ctrl_tab now const.
2220 (cobr): Local static array cobr_tab now const.
2221 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2222 static variable mem_tab no longer explicitly initialized. Changed
2223 mem_init to const array of struct sparse_tabent.
2224 (reg): Local static variable reg_tab no longer explicitly
2225 initialized. Changed reg_init to const array of struct
2227 (ea): Local static array scale_tab now const.
2229 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2232 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2234 * configure.bat: the disassember needs to be enabled for
2235 "objdump -d" to work in djgpp.
2237 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2239 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2240 (invalid_float): Enabled general version, doesn't require running
2241 on ns32k host. Changed to take char* argument, and test for
2242 explicitly specified sizes, instead of using sizeof() on host CPU
2244 (INVALID_FLOAT): Cast first argument.
2245 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2246 list_P032, list_M032): Now const.
2247 (optlist, list_search): Made appropriate arguments now point to
2249 (print_insn_arg): Changed static array of one-character-string
2250 pointers into a static const array of characters; fixed sprintf
2251 statement accordingly.
2253 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2255 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2256 from distribution. A ns32k-dis.c from a previous distribution has
2257 been brought up to date and supports the new interface.
2259 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2261 * configure.in: add bfd_ns32k_arch target support.
2263 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2264 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2266 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2268 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2271 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2273 * h8300-dis.c, mips-dis.c: Don't use true and false.
2275 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2277 * configure.in: Change --with-targets to --enable-targets.
2279 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2281 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2282 opcodes to the first instruction with that opcode, to speed
2283 disassembly of large files. From ralphc@pyramid.com (Ralph
2286 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2288 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2290 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2292 * configure.bat: update to latest makefile.in
2294 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2296 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2297 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2298 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2299 slot insn is in a delay slot.
2300 * z8k-opc.h: (resflg): Fix patterns.
2301 * h8500-opc.h Fix CR insn patterns.
2303 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2305 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2306 "cmpl" before POWER versions, so that gas -many uses them.
2308 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2310 * disassemble.c: New file.
2311 * Makefile.in (OFILES): Add disassemble.o.
2312 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2313 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2314 binutils/configure.in.
2316 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2317 opcode being examined.
2319 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2321 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2322 (insert_ral, insert_ram, insert_ras): New functions.
2323 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2324 RAS for store with update.
2326 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2328 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2329 (edelsohn@npac.syr.edu).
2331 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2333 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2336 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2338 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2340 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2342 * ppc-opc.c (powerpc_operands): The signedp field has been
2343 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2344 instead. Add new operand SISIGNOPT.
2345 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2346 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2347 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2350 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2352 * i386-dis.c (struct private): Renamed to dis_private. `private'
2353 is a reserved word for dynix cc.
2355 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2357 * configure.in: Change error message to refer to bfd/config.bfd
2358 rather than bfd/configure.in.
2360 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2362 * ppc-opc.c: Define POWER2 as short alias flag.
2363 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2366 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2368 * i960-dis.c (print_insn_i960): Don't read a second word for
2369 opcodes 0, 1, 2 and 3.
2371 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2373 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2375 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2377 * m68881-ext.c: Removed; no longer used.
2378 * Makefile.in: Changed accordingly.
2380 * m68k-dis.c (ext_format_68881): Don't declare.
2381 (print_insn_m68k): If an instruction uses place 'i', it uses at
2382 least four fixed bytes.
2383 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2384 extended float, convert to double using floatformat_to_double, not
2385 ieee_extended_to_double, and fetch the data before converting it.
2387 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2389 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2390 davidj@ICSI.Berkeley.EDU (David Johnson).
2392 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2394 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2395 PowerPC uses bdnz[l][a].
2397 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2399 * dis-buf.c, i386-dis.c: Include sysdep.h.
2401 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2403 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2405 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2406 by Motorola PowerPC 601 with PPC_OPCODE_601.
2407 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2408 Disassemble Motorola PowerPC 601 instructions as well as normal
2409 PowerPC instructions.
2411 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2413 * i960-dis.c (reg, mem): Just use a static array instead of
2416 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2418 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2419 condition name index if this is for a negated condition.
2421 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2422 Floating point format for 'H' operand is backwards from normal
2423 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2424 operands (fmpyadd and fmpysub), handle bizarre register
2425 translation correctly for single precision format.
2427 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2428 or 'I' operands if the next format specifier is 'M' (fcmp
2429 condition completer).
2431 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2433 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2434 single number giving a bitmask for the MB and ME fields of an M
2435 form instruction. Change NB to accept 32, and turn it into 0;
2436 also turn 0 into 32 when disassembling. Seperated SH from NB.
2437 (insert_mbe, extract_mbe): New functions.
2438 (insert_nb, extract_nb): New functions.
2439 (SC_MASK): Mask out SA and LK bits.
2440 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2441 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2442 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2443 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2444 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2445 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2446 (powerpc_macros): Define table of macro definitions.
2447 (powerpc_num_macros): Define.
2449 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2450 if PPC_OPERAND_NEXT is set.
2452 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2454 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2455 char. Retrieve contents using bfd_getl32 instead of shifting.
2457 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2459 * ppc-opc.c: New file. Opcode table for PowerPC, including
2460 opcodes for POWER (RS/6000).
2461 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2462 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2463 (CFILES): Add ppc-dis.c.
2464 (ppc-dis.o, ppc-opc.o): New targets.
2465 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2467 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2469 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2470 No space before 'u', 'f', or 'N'.
2472 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2474 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2475 farther than we should.
2477 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2479 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2481 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2483 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2485 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2486 needs it, to prevent reading past the end of a section.
2488 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2490 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2491 Removed t,A case for la; always use t,A(b) case.
2493 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2495 From Ted Lemen <mellon@pepper.ncd.com>
2496 * mips-dis.c (print_insn_arg): Handle 'k'.
2497 * mips-opc.c: Make cache use k, not t.
2499 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2501 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2502 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2503 FLOAT_FORMAT_CODE to put out floating point register names.
2505 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2507 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2509 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2511 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2513 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2515 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2516 larger than 32. Moved dsxx32 variants first for disassembler.
2518 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2520 * z8kgen.c, z8k-opc.h: Add full lda information.
2522 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
2524 * hppa-dis.c (print_insn_hppa): Do not emit a space after
2525 movb instructions. Any necessary space will be emitted by
2526 the code to handle nullification completers.
2528 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2530 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
2532 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2534 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
2535 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
2537 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2539 * mips-opc.c: Correct lwu opcode value (book had it wrong).
2541 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2543 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
2544 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
2546 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
2548 * m88k-dis.c (m88kdis): comment change. Remove space after
2550 (printop): handle new arg types DEC and XREG for m88110.
2552 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
2554 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
2555 type for absolute branch addresses. Delete special
2556 "ble" and "be" code in 'W' operand code.
2558 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2560 * mips-opc.c: Set hazard information correctly for branch
2561 likely instructions.
2563 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2565 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
2566 info->fprintf_func for printing and info->print_address_func for
2569 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2571 * mips-opc.c: Set INSN_TRAP for tXX instructions.
2573 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2575 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
2576 Corrected second case of "b" for disassembler.
2578 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2580 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
2581 to BFD swapping routines to correspond to BFD name changes.
2583 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2585 * mips-opc.c: Change div machine instruction to be z,s,t rather
2586 than s,t. Change div macro to be d,v,t rather than d,s,t.
2587 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
2588 rem and remu which generates only the corresponding div
2589 instruction. This is for compatibility with the MIPS assembler,
2590 which only generates the simple machine instruction when an
2591 explicit destination of $0 is used.
2592 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
2594 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2596 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
2597 WR_31 hazard for bal, bgezal, bltzal.
2599 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2601 * hppa-dis.c (print_insn_hppa): Use print function
2602 from within the disassemble_info, not fprintf_filtered.
2604 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2606 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
2607 Law, law@cs.utah.edu.)
2609 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2611 * mips-opc.c ("absu"): Removed.
2614 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2616 * mips-opc.c: Added r6000 and r4000 instructions and macros.
2617 Changed hazard information to distinguish between memory load
2618 delays and coprocessor load delays.
2620 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2622 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
2624 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2626 * configure.in: Don't pass cpu to config.bfd.
2628 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2630 * m88k-dis.c (m88kdis): Make class unsigned.
2632 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
2634 * alpha-dis.c (print_insn_alpha): One branch format case was
2635 missing the instruction name.
2637 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
2639 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
2640 Add the arch-specific auxiliary files.
2641 (OFILES): Remove the arch-specific auxiliary files
2642 and use BFD_MACHINES instead of DIS_LIBS.
2643 * configure.in: Set BFD_MACHINES based on --with-targets option.
2645 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2647 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
2650 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2652 * sparc-opc.c: Change CONST to const to deal with gcc
2653 -Dconst=__const -traditional.
2655 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2657 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
2658 coprocessor instructions out of #if 0, and made them use new
2661 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2663 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
2665 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
2667 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
2668 instruction, for use by the disassembler.
2670 * sparc-dis.c (SEX): Add sign extension macro. Replace many
2671 hand-coded sign extensions that depended on 32-bit host ints.
2672 FIXME, we still depend on big-endian host bitfield ordering.
2673 (sparc_print_insn): Set the insn_info_valid field, and the
2674 other fields that describe the instruction being printed.
2676 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
2678 * sparc-opc.c (call): Accept all 6 addressing modes valid for
2679 `jmp' instead of just one of them.
2681 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2683 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
2684 (fput_fp_reg_r): Renamed from fput_reg_r.
2685 (fput_fp_reg): New function.
2686 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
2688 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
2690 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
2692 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
2694 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
2696 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
2697 don't output a space.
2699 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
2701 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
2703 * mips-opc.c: New file, containing opcode table from
2704 ../include/opcode/mips.h.
2705 * Makefile.in: Add it.
2707 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2709 * m88k-dis.c: New file, moved in from gdb and changed to use the
2710 new dis-asm.h disassembler interface.
2711 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
2712 (m88k-dis.o): New target.
2714 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
2716 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
2717 argument string const char * to correspond to opcode/mips.h.
2719 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
2721 * mips-dis.c: Updated to account for name changes in new version
2723 * Makefile.in: Added header file dependencies.
2725 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
2727 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
2729 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2731 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
2732 extend, rather than shifts.
2734 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
2736 * Makefile.in: Undo 15 June change.
2738 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
2740 * m68k-dis.c (print_insn_arg): Change return value to byte count
2742 * m68k-dis.c: Re-write to detect invalid operands before
2743 printing anything, so we can handle this the same way we
2744 handle invalid opcodes.
2746 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2748 * sh-dis.c, sh-opc.h: Understand some more opcodes.
2750 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
2752 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
2755 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2757 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
2759 * configure.in: Do make sysdep.h link.
2760 * Makefile.in: Search ../include. Don't search ../bfd.
2762 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
2764 Changes from Jeff Law, law@cs.utah.edu:
2765 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
2766 Do not print a space before the completers specified by
2769 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
2771 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
2772 defined, since gdb has been fixed.
2774 Changes from Jeff Law, law@cs.utah.edu:
2775 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
2776 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
2777 be a *disassemble_info, not a *FILE.
2778 * hppa-dis.c: Support 'd', '!', and 'a'.
2779 * hppa-dis.c: Support 's' to extract a 2 bit space register.
2780 * hppa-dis.c: Delete cases which are no longer needed.
2782 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
2784 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
2786 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2788 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
2791 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
2793 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
2794 * configure.in: No longer need to configure to get sysdep.h.
2796 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
2798 * Patches from Jeffrey Law <law@cs.utah.edu>.
2799 * hppa-dis.c: Support 'I', 'J', and 'K' in output
2800 templates for 1.1 FP computational instructions.
2802 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2804 * h8500-dis.c (print_insn_h8500): Address argument is type
2806 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
2809 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
2810 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
2812 * sparc-dis.c (compare_opcodes): Move static declaration to
2815 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2817 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
2818 instruction, remove unimp hack from 'l' argument.
2820 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
2822 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
2825 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
2827 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
2828 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
2831 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2833 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
2834 arrays of string pointers to 2-d arrays of chars, to save
2837 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
2839 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
2840 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
2842 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2844 * hppa-dis.c: New file from Utah, adapted to new disassembler
2846 * Makefile.in: Include it.
2848 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2850 * sh-dis.c, sh-opc.h: New files.
2852 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2854 * alpha-dis.c, alpha-opc.h: New files.
2856 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2858 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
2861 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
2863 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
2865 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
2867 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
2870 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
2872 * sparc-dis.c: Use fprintf_func a few places where I forgot,
2873 and double percent signs a few places.
2875 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
2877 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
2878 Use info->print_address_func not print_address.
2880 * dis-buf.c (generic_print_address): New function.
2882 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2884 * Makefile.in: Add sparc-dis.c.
2885 sparc-dis.c: New file, merges binutils and gdb versions as follows:
2887 Add `add' instruction to the set that get checked
2888 for a preceding `sethi' in order to print an absolute address.
2889 * (print_insn): Disassembly prefers real instructions.
2890 (is_delayed_branch): Speed up.
2891 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
2892 Still missing some float ops, and needs testing.
2893 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
2894 F_ALIAS. Use printf, not fprintf, when not passing a file
2896 (compare_opcodes): Check that identical instructions have
2897 identical opcodes, complain otherwise.
2900 * Include reg_names.
2902 Use dis-asm.h/read_memory_func interface.
2904 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
2906 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
2907 deliberately return non-zero to setjmp from longjmp. Otherwise
2908 this code fails to compile.
2910 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
2912 * m68k-dis.c: Fix prototype for fetch_arg().
2914 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
2916 * dis-buf.c: New file, for new read_memory_func interface.
2917 Makefile.in (OFILES): Include it.
2918 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
2919 Use new read_memory_func interface.
2921 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2923 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
2924 * h8500-opc.h: Fix couple of opcodes.
2926 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
2928 * Makefile.in: add dvi & installcheck targets
2930 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
2932 * Makefile.in: Update for h8500-dis.c.
2934 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2936 * h8500-dis.c, h8500-opc.h: New files
2938 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
2940 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
2941 ../include/dis-asm.h.
2942 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
2943 and ../gdb/m68k-pinsn.c).
2944 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
2945 and ../gdb/i386-pinsn.c).
2946 * m68881-ext.c: New file. Moved definition of
2947 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
2948 * Makefile.in: Adjust for new files.
2949 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
2950 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
2951 can be dis-assembled.
2953 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
2955 * mips-dis.c (print_insn_arg): Now returns void.
2957 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
2959 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
2960 files that use the macros.
2962 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2964 * mips-dis.c: New file, from gdb/mips-pinsn.c.
2965 * Makefile.in (DIS_LIBS): Added mips-dis.o.
2966 (CFILES): Added mips-dis.c.
2968 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
2970 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
2971 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
2973 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
2975 * Makefile.in: Improve *clean rules.
2976 * configure.in: Allow a default host.
2978 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2980 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
2981 files include other sysdep files
2983 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
2985 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
2987 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
2989 * configure.in: For host support, use ../bfd/configure.host
2990 so it stays in sync with the ../bfd/hosts database.
2992 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
2994 * configure.in: use cpu-vendor-os triple instead of nested cases
2996 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
2998 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
2999 *always* the wrong one.
3001 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3003 * z8kgen.c: added copyright info
3005 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3007 * z8k-dis.c (unparse_instr): prettier tabs
3008 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3010 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3012 * configure.in: Add ncr* configuration.
3013 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3014 picayune ANSI compilers happy.
3016 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3018 * configure.in (i386): Make i386 and i486 synonymous for now.
3019 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3021 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3023 * Makefile.in (install): Fix typo.
3025 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3027 * Makefile.in (make): Remove obsolete crud.
3028 (sparc-opc.o): Avoid Sun Make VPATH bug.
3030 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3032 * Makefile.in: since there are no SUBDIRS, remove rule and
3033 references of subdir_do.
3035 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3037 * Makefile.in (install): Get the library name right here too.
3038 Don't install bfd.h, since it's unrelated to this library. No
3039 subdirs to recurse into, either.
3040 (CFILES): The source file has a .c suffix, not .o.
3042 * sparc-opc.c: New file, moved from BFD.
3043 * Makefile.in (OFILES): Build it.
3045 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3047 * z8k-dis.c: fixed forward refferences of some declarations.
3049 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3051 * Makefile.in: get the name of the library right
3053 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3055 * z8k-dis.c: knows how to disassemble z8k stuff
3056 * z8k-opc.h: new file full of z8000 opcodes
3060 version-control: never
projects / platform / upstream / binutils.git / blob