2 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
4 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
7 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
9 The following changes were made by
10 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
11 David Taylor <taylor@texas.cygnus.com>, and
12 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
13 merge in changes by HP; HP did not create ChangeLog entries.
15 * dis-buf.c (generic_strcat_address): new function.
17 * hppa-dis.c: Changes to improve hppa disassembly.
18 Changed formatting in : reg_names, fp_reg_names,control_reg,
19 New variables : sign_extension_names, deposit_names, conversion_names
20 float_test_names, compare_cond_names_double, add_cond_names_double,
21 logical_cond_names_double, unit_cond_names_double,
22 branch_push_pop_names, saturation_names, shift_names, mix_names,
23 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
24 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
25 (fput_const): renamed as fput_hex_const
27 - use the macros fputs_filtered and
28 fput_decimal_const whenever possible; calls to sign_extend require
29 2 params -- add a missing second param of 0.
30 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
31 architecture version number of current machine. HP folks are
32 trying to handle situation where the target program was compiled
33 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
35 - added new cases : 'g', 'B', 'm'
36 - added cases specifically for PA 2.0
37 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
38 - calls to fput_const become calls to fput_hex_const
40 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
42 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
43 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
45 (CLEANFILES): Add stamp-i960.
47 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
50 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
51 * Makefile.in: Rebuilt.
52 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
54 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
55 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
58 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
60 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
63 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
65 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
67 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
68 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
71 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
73 * fr30-opc.c: Regenerate.
75 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
77 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
79 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
81 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
83 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
85 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
88 1998-11-30 Doug Evans <devans@casey.cygnus.com>
90 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
93 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
94 New args word_offset, word_length. Rewrite.
96 (insert_1): Fix lsb0 case.
97 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
98 New args word_offset, word_length. Rewrite.
100 (extract_1): Fix lsb0 case.
101 * cgen-opc.in (FLD): Define.
103 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
105 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
108 start-sanitize-cygnus
109 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
111 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
112 * Makefile.in: Rebuild.
116 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
118 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
120 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
122 * fr30-asm.c,fr30-dis.c: Regenerated.
124 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
126 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
128 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
130 * fr30-opc.c: Regenerated.
132 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
134 * fr30-opc.c: Regenerated.
135 * fr30-opc.h: Regenerated.
136 * fr30-dis.c: Regenerated.
137 * fr30-asm.c: Regenerated.
140 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
142 * mips-opc.c (sync.p,sync.l): Swap insn values.
145 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
147 * fr30-opc.c: Regenerate.
149 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
151 * fr30-opc.c: Regenerated.
152 * fr30-opc.h: Regenerated.
155 1998-11-18 Doug Evans <devans@casey.cygnus.com>
157 start-sanitize-cygnus
158 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
159 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
161 (insert_insn_normal): Fix typo.
162 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
163 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
164 Rewrite ! CGEN_INT_INSN_P case.
165 (extract_insn_normal): Ditto.
166 (extract_1): New arg `pc'. All callers updated.
167 Replace calls to bfd_getb8.
168 (fill_cache): New fn.
169 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
170 * cgen-opc.in: ... from here.
171 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
173 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
175 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
179 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
181 * fr30-opc.c: Regenerated.
183 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
185 * fr30-opc.c: Regenerated.
186 * fr30-opc.h: Regenerated.
187 * fr30-dis.c: Regenerated.
188 * fr30-asm.c: Regenerated.
190 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
192 * po/opcodes.pot: Regenerated.
193 * fr30-opc.c: Regenerated.
194 * fr30-opc.h: Regenerated.
195 * fr30-dis.c: Regenerated.
196 * fr30-asm.c: Regenerated.
198 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
200 * disassemble.c (disassembler): Add support for FR30 target.
203 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
205 start-sanitize-cygnus
206 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
207 CGEN_OPERAND_SEM_ONLY.
209 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
211 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
213 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
215 * po/opcodes.pot: Regenerate.
216 * po/POTFILES.in: Regenerate.
217 * fr30-opc.c: Regenerate.
218 * fr30-opc.h: Regenerate.
220 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
222 * m32r-asm.c: Regenerate.
225 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
227 * configure.in: Added case for bfd_fr30_arch.
228 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
229 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
230 (CLEANFILES): Added stamp-fr30.
232 * fr30-asm.c: New file.
233 * fr30-dis.c: New file.
234 * fr30-opc.c: New file.
235 * fr30-opc.h: New file.
236 * po/POTFILES.in: Regenerated
237 * po/opcodes.pot: Regenerated
241 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
243 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
244 to bcl8,bncl8 entries.
245 (macro_insn_table_entries): Add FILL_SLOT attribute
246 to bcl8r,bncl8r entries.
249 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
251 * configure.in: detect cygwin* instead of cygwin32*
252 * configure: regenerate
254 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
256 * mips-opc.c (IS_M): Added.
259 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
261 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
265 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
267 start-sanitize-cygnus
268 * cgen-asm.in (insert_1): New function.
269 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
270 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
271 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
272 * cgen-dis.in (extract_1): New function.
273 (extract_normal): buf_ctrl renamed to ex_info, update type.
274 Progress on handling of CGEN_INT_INSN_P.
275 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
276 Update handling of CGEN_INT_INSN_P. Handle errors from
277 @arch@_cgen_extract_operand.
278 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
279 (default_print_insn): Renamed from print_insn.
280 Handle ! CGEN_INT_INSN_P.
281 (print_insn_@arch@): Handle error returns from print_insn.
282 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
283 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
284 (@arch@_cgen_lookup_get_insn_operands): Ditto.
286 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
289 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
291 * m10300-opc.c: Allow autoincrement stores using the same register
292 for source and destination operands.
294 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
296 * m10300-opc.c: DSP instrutions which only write to one general
297 register have no restrictions on matching operands.
299 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
302 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
304 * m32r-opc.h,m32r-opc.c: Regenerate.
307 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
309 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
312 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
314 * i386-dis.c (OP_3DNowSuffix): New static function.
317 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
318 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
319 (insn_codep): New static variable.
320 (print_insn_x86): Init insn_codep after prefixes.
321 (grps): Add GRP14 entries for prefetch, prefetchw.
324 From Jeff B Epler <jepler@usgs.gov>
325 * i386-dis.c (Suffix3DNow): New table.
327 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
329 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
331 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
333 * d10v-dis.c (print_operand): If num is nonzero, then
334 add OPERAND_ACC1, not OPERAND_ACC0.
336 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
338 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
341 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
343 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
347 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
349 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
352 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
354 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
356 start-sanitize-nortel-ppc750
357 1998-09-09 Michael Meissner <meissner@cygnus.com>
359 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
362 end-sanitize-nortel-ppc750
363 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
365 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
367 (print_insn_little_arm): Detect Thumb symbols in elf object
370 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
372 * alpha-dis.c (print_insn_alpha): Use the machine type to
373 decide which PALcode set to include.
375 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
377 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
379 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
381 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
382 MSUB and MSUBS instructions.
385 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
387 * mips-opc.c: Insert contents of vu0.h, rather than including it.
389 * Makefile.am: Rebuild dependencies.
393 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
395 * ppc-opc.c (powerpc_operands): Omit parens around additions in
398 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
400 start-sanitize-coldfire
401 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
402 ColdFire, as below for mulsl and mulul.
404 end-sanitize-coldfire
405 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
406 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
407 +, -, and d for ColdFire.
409 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
410 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
411 (extract_mbe): Likewise.
413 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
415 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
417 * m10300-opc.c: First cut at UDF instructions.
419 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
421 * m32r-opc.c: Regenerate (remove semantic descriptions).
423 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
425 * arm-dis.c (print_insn_big_arm): Fix indentation.
426 (print_insn_little_arm): Likewise.
428 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
430 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
432 (print_insn_little_arm): Likewise.
434 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
436 Move all global state data into opcode table struct, and treat
437 opcode table as something that is "opened/closed".
438 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
439 (cgen_asm_init): Delete.
440 (cgen_set_parse_operand_fn): New function.
441 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
442 (cgen_dis_init): Delete.
443 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
444 (cgen_current_{opcode_table_mach,endian}): Delete.
445 start-sanitize-cygnus
446 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
447 * cgen-dis.in (all fns): Ditto.
448 * cgen-opc.in (all fns): Ditto.
450 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
452 start-sanitize-cygnus
453 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
455 * cgen-dis.in (print_normal): Split into two.
456 (print_address): New function.
457 (extract_insn_normal): Clarify insn_value arg.
458 (print_int_insn): Renamed from print_insn.
459 (print_insn): New arg.
460 (print_insn_@arch@): Open opcode table if not already done so.
461 Move reading of insn into print_insn.
464 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
466 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
470 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
472 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
473 accept an accumulator choice.
474 * m32r-opc.c,m32r-opc.h: Regenerate.
477 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
479 * m10300-opc.c: Add entries for "no_match_operands" field in
483 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
485 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
489 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
491 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
494 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
496 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
498 * m10300-opc.c: Add autoincrement memory loads/stores.
502 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
504 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
505 phmsubh respectively.
508 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
510 start-sanitize-cygnus
511 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
513 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
514 @arch_cgen_get_int_operand.
515 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
516 Update call to @arch@_cgen_insert_operand.
517 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
518 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
519 (extract_insn_normal): New arg `pc', callers updated.
520 Update call to @arch@_cgen_extract_operand.
521 (print_insn): Update call to CGEN_EXTRACT_FN.
523 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
526 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
528 * m10300-opc.c: Fix load to sp and store from sp for the am33.
529 Add more multimedia instructions.
531 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
533 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
538 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
540 * mips-opc.c (pref): Enabled for the r5900.
543 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
545 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
547 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
549 (OP_J): Remove unnecessary subtraction when 16-bit displacement
550 will be masked later.
553 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
555 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
558 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
560 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
561 from raw register #s to symbolic names to make debugging easier.
564 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
566 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
568 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
570 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
571 start-sanitize-cygnus
572 * Makefile.am (CGENDIR): Set via configure.
573 (CGEN): New variable.
574 (CGENFILES): object.scm renamed to cos.scm.
575 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
576 (stamp-m32r): Pass prefix to run-cgen.
577 * Makefile.in: Regenerate.
578 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
579 * cgen-dis.in: Ditto.
580 * cgen-opc.in: Ditto.
581 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
582 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
583 * configure: Regenerate.
587 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
589 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
591 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
593 * m10300-opc.c: Reorder more instructions so that we do not
594 accidentally match a mn10300 instruction when we really
595 wanted an am33 instruction.
598 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
600 * m10300-dis.c: Only recognize instructions from the currently
602 * m10300-opc.c: Add field indicating the particular variant of
603 the mn10300 each instruction is available on.
605 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
607 * configure.in: For bfd_vax_arch, build vax-dis.lo.
608 * Makefile.am: Rebuild dependencies.
609 (CFILES): Add vax-dis.c.
610 (ALL_MACHINES): Add vax-dis.lo.
611 * aclocal.m4: Rebuild with current libtool.
612 * configure, Makefile.in: Rebuild.
614 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
616 * vax-dis.c: New file, from work by Pauline Middelink
617 <middelin@polyware.iaf.nl>.
618 * disassemble.c (ARCH_vax): Define if ARCH_all.
619 (disassembler): Add case for ARCH_vax.
620 * makefile.vms: Support compilation on vms/vax.
623 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
625 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
626 the DVP_OPERAND_RELOC_11_S4 relocation.
630 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
632 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
634 (disassemble): Correctly handle FMT_D10 instructions.
636 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
637 am33 shift instructions.
639 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
641 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
642 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
644 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
645 (mn10300_opcodes): Reorder so as to try and select opcodes from
646 the core chip when multiple alternatives exist. Change several
647 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
648 "macbu" instructions. Fix typos in a couple DSP instructions too.
651 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
653 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
654 related to sign extension and the size of ints.
656 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
658 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
659 instructions. Support (sp) addressing mode by expanding it into
663 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
665 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
666 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
667 be used as immediate values.
671 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
673 * m10300-opc.c: Support 4 byte DSP instructions.
676 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
678 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
681 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
683 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
686 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
688 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
691 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
693 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
694 found on the mn10300.
697 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
699 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
702 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
704 * mips-dis.c (print_insn_little_mips): Previously, instruction
705 printing references the symbol table to determine whether the
706 instruction resides in a block regular instructions or mips16
707 instructions. However, when the disassembler gets used in other
708 environments where the symbol table is not present, we no longer
709 rely in the symbol table, rather, use the low bit of the
710 instructions address to guess. There should be no change for usage
711 of the disassembler in host based programs, gdb, objdump.
712 (print_insn_big_mips): ditto.
713 (print_insn_mips): ditto
715 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
717 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
719 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
722 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
723 operands for the am33.
724 (mn10300_opcodes): Add new instructions from the am33.
726 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
728 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
730 * i386-dis.c (index16): Add '%' to register names. Use ','
733 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
735 * i386-dis.c: Don't print opcode suffix when we can figure out the
736 size (and gas can!) by register operands, or from the default
738 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
740 (dis386, dis386_twobyte, grps): Use new suffix macros.
741 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
742 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
743 order of cmps operands to agree with Intel docs. Correct operand
744 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
745 agree with Intel docs.
746 (print_insn_x86): Print orphan fwait before other prefixes.
747 Return correct byte count for orphan fwait with prefixes. Don't
748 print `bound' operands in reverse order.
749 (ckprefix): Stop accumulating prefixes if we get fwait.
750 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
752 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
754 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
755 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
757 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
759 Fix problems when bfd_vma is wider than long.
760 * i386-dis.c: Make op_address and start_pc unsigned.
761 (set_op): Make parameter unsigned.
762 (print_insn_x86): Cast to bfd_vma when passing a value to
764 * ns32k-dis.c (CORE_ADDR): Don't define.
765 (print_insn_ns32k): Change type of addr to bfd_vma. Use
766 bfd_scan_vma to read back address.
767 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
769 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
770 (NEXTULONG): New definition.
771 (print_insn_m68k): Avoid overflow when computing third argument of
773 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
774 Use disp instead of val to store offset values.
775 (print_indexed): Use base_disp instead of word to store base
776 displacement, to avoid overflow.
777 * m10300-dis.c (disassemble): Cast value to long when computing
778 pc-relative address, to get correct sign extension.
780 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
782 * m32r-opc.c: Regenerate.
784 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
786 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
787 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
789 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
791 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
793 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
795 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
797 (OP_DSreg): Rename from OP_DSSI.
798 (OP_ESreg): Rename from OP_ESDI.
799 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
801 (append_seg): Rename from append_prefix.
802 (ptr_reg): New function.
803 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
805 (PREFIX_ADDR): Rename from PREFIX_ADR.
806 (float_reg): Add non-broken opcodes for people who don't want
809 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
811 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
814 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
816 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
818 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
820 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
821 0; produce error message for shifts of size 32 (or 64 for 64-bit
822 shifts), because the hardware doesn't support them.
825 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
827 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
830 * vu0.h (sqc2): Fix opcode.
832 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
836 start-sanitize-cygnus
837 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
839 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
840 Change pinfo to use WR_HILO.
843 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
845 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
846 LONG_2, LONG_2b formats to use this new operand.
848 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
850 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
852 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
854 * sparc-dis.c (print_insn_sparc): big endian instruction / little
857 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
859 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
860 and SHORT_B3b formats to use Rb instead of Ra.
862 Add FLAG_MUL16 to MUL2XH opcode.
864 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
865 to existing 1.1.1 parallelisation prohibition procedure.
867 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
869 start-sanitize-cygnus
870 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
871 * cgen-dis.in (extract_normal): Likewise.
873 * m32r-asm.c,m32r-dis.c: Regenerate.
876 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
878 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
882 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
884 * mips-opc.c (multu1): Add two operand variant for the r5900.
887 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
889 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
890 with a shift count of 0.
893 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
895 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
897 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
899 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
900 (_print_insn_mips): Likewise.
901 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
905 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
907 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
908 (cgen_hw_lookup_by_num): New function.
911 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
914 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
916 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
918 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
920 * sparc-dis.c (print_insn_sparc): Always fetch instructions
921 as big-endian on SPARClite.
924 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
926 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
928 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
932 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
934 * d30v-opc.c (pre_defined_register): Remove alias for r0.
937 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
939 * mips-opc.c (break): Added 20-bit single-operand break
940 instruction for R5900 only.
943 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
945 * po/Make-in (install-info): New target.
947 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
949 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
950 * configure: Rebuild.
952 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
954 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
955 variety of ISA2 instructions to set bottom ten bits of trap code.
957 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
959 * Makefile.am (config.status): Add explicit target so that
960 config.status depends upon bfd/configure.in.
961 * Makefile.in: Rebuild.
963 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
965 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
966 instructions to set bottom ten bits of break code.
967 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
968 for above optional argument.
970 start-sanitize-cygnus
971 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
973 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
974 * m32r-opc.h: Regenerate.
977 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
979 * makefile.vms: Run dec c with /nodebug.
981 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
983 * Makefile.in: Rebuilt.
984 * Makefile.am: Regenerated dependencies with mkdep.
986 * opintl.h (_): Define as dgettext.
988 start-sanitize-cygnus
989 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
991 * configure.in: Add support for --enable-cgen-maint.
992 * Makefile.am (M32R_DEPS): New variable.
993 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
994 * aclocal.m4: Regenerate.
995 * Makefile.in: Regenerate.
996 * configure: Regenerate.
998 * Makefile.am (CGENFILES): Add minsn.scm.
1001 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1003 * cgen-asm.c: Internationalised.
1004 start-sanitize-cygnus
1005 * cgen-asm.in: Internationalised.
1006 * cgen-opc.in: Internationalised.
1008 * m32r-asm.c: Internationalised.
1009 * m32r-dis.c: Internationalised.
1010 * m32r-opc.c: Internationalised.
1012 * aclocal.m4: Regenerated.
1013 * configure: Regenerated.
1014 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1015 * Makefile.in: Rebuild.
1016 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1017 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1019 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1021 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1023 * aclocal.m4, configure: Rebuild with current tools.
1025 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1027 * opintl.h: New file - contains internationalisation macros used
1028 by source files in this directory.
1029 * po/: New subdirectory - contains internationalisation files.
1030 * po/Make-in: New file - Makefile constructor.
1031 * po/POTFILES.in: New file - list of files in opcodes directory
1032 that should be scan for internationalisation macros.
1033 * po/opcodes.pot: New file - list of internationisation strings
1034 found in files mentioned in po/POTFILES.in.
1035 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1036 entry. Add intl directory to include paths.
1037 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1038 HAVE_STRCPY, HAVE_LC_MESSAGES
1039 * configure.in: Add rule to build Makefile in po subdirectory.
1040 * Makefile.in: Rebuilt.
1041 * aclocal.m4: Rebuilt.
1042 * config.in: Rebuilt.
1043 * configure: Rebuilt.
1044 * alpha-opc.c: Internationalised.
1045 * arc-dis.c: Internationalised.
1046 * arc-opc.c: Internationalised.
1047 * arm-dis.c: Internationalised.
1048 * cgen-asm.c: Internationalised.
1049 * d30v-dis.c: Internationalised.
1050 * dis-buf.c: Internationalised.
1052 * dvp-dis.c: Internationalised.
1053 * dvp-opc.c: Internationalised.
1055 * h8300-dis.c: Internationalised.
1056 * h8500-dis.c: Internationalised.
1057 * i386-dis.c: Internationalised.
1058 * m10200-dis.c: Internationalised.
1059 * m10300-dis.c: Internationalised.
1060 * m68k-dis.c: Internationalised.
1061 * m88k-dis.c: Internationalised.
1062 * mips-dis.c: Internationalised.
1063 * ns32k-dis.c: Internationalised.
1064 * opintl.h: Internationalised.
1065 * ppc-opc.c: Internationalised.
1066 * sparc-dis.c: Internationalised.
1067 * v850-dis.c: Internationalised.
1068 * v850-opc.c: Internationalised.
1070 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1072 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1073 (asm_hash_table_entries): New variable.
1074 (cgen_asm_init): Free asm_hash_table_entries.
1075 (hash_insn_array,hash_insn_list): New functions.
1076 (build_asm_hash_table): Use them. Hash macro insns as well.
1077 (cgen_asm_lookup_insn): Update.
1078 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1079 (dis_hash_table_entries): New variable.
1080 (cgen_dis_init): Free dis_hash_table_entries.
1081 (hash_insn_array,hash_insn_list): New functions.
1082 (build_dis_hash_table): Use them. Hash macro insns as well.
1083 (cgen_dis_lookup_insn): Update.
1084 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1085 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1086 (cgen_macro_insn_count): New function.
1087 start-sanitize-cygnus
1088 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1089 All callers updated. Sanity check result of extract fn.
1090 (@arch@_cgen_get_insn_operands): Change result type to void.
1091 Delete args insn_value, length. New arg fields. All callers updated.
1092 (@arch@_cgen_lookup_get_insn_operands): New function.
1094 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1096 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1098 * i386-dis.c (OP_DSSI): Print segment override.
1100 start-sanitize-r5900
1101 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1103 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1106 start-sanitize-r5900
1107 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1109 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1112 start-sanitize-r5900
1113 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1115 * vu0.h (vlqd, vlqi): Update per revised specs.
1119 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1121 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1122 (vif_operands): Update.
1123 (vif_get_unpackloc): Delete.
1124 (state_vif_unpackloc{,_star_p}): Delete.
1125 (dvp_opcode_init_parse): Update.
1126 (vif_unpack_len_value): Avoid divide by zero.
1129 start-sanitize-r5900
1130 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1132 * vu0.h: Specs changed for VCALLMSR bit pattern.
1133 * mips-dis.c: (print_insn_arg) Matching change.
1136 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1138 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1141 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1143 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1144 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1145 * configure.in: Define and substitute WIN32LDFLAGS and
1147 * aclocal.m4: Rebuild with new libtool.
1148 * configure, Makefile.in: Rebuild.
1150 start-sanitize-r5900
1151 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1153 * vu0.h: Corrected bit pattern for VMAXI opcode.
1156 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1158 * m32r-opc.c: Regenerate.
1161 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1163 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1164 (dvp_expand_macro): Implement.
1165 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1166 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1169 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1171 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1172 before trying to copy it.
1173 * Makefile.in: Rebuild.
1175 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1177 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1179 start-sanitize-m32rx
1180 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1182 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1185 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1187 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1188 from an arbitrary valid buffer instead of fetching them on demand
1190 (invalid_float): use bit_extract_simple() instead of bit_extract().
1192 start-sanitize-m32rx
1193 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1195 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1196 * m32r-opc.h: Add extra control registers.
1199 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1201 From H.J. Lu <hjl@gnu.org>:
1202 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1205 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1207 * Branched binutils 2.9.
1209 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1211 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1212 disassembling last 4 bytes of a section.
1214 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1216 Fix some gcc -Wall warnings:
1217 * arc-dis.c (print_insn): Add casts to avoid warnings.
1218 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1219 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1221 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1222 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1223 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1224 (parse_ffstreg, parse_vif_mode): Likewise.
1226 * m10200-dis.c (disassemble): Likewise.
1227 * m10300-dis.c (disassemble): Likewise.
1228 * ns32k-dis.c (print_insn_ns32k): Likewise.
1229 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1230 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1231 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1232 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1233 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1235 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1236 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1237 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1239 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1240 start-sanitize-tic80
1241 * tic80-dis.c (print_one_instruction): Likewise.
1243 * w65-dis.c (print_operand): Likewise.
1244 * z8k-dis.c (fetch_data): Likewise.
1245 * a29k-dis.c: Add return type for find_byte_func_type.
1246 * arc-opc.c: Include <stdio.h>. Remove declarations of
1247 insert_multshift and extract_multshift.
1248 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1250 (extract_value): Fully parenthesize expression.
1252 * dvp-opc.c: Include <ctype.h>.
1253 (print_sdest): Add default case to switch.
1255 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1256 * h8500-opc.h (h8500_table): Fully bracket initializer.
1257 * w65-opc.h (optable): Likewise.
1258 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1259 * i386-dis.c (OP_E): Initialize local variables.
1260 * m10200-dis.c (print_insn_mn10200): Likewise.
1261 * mips-dis.c (print_insn_mips16): Likewise.
1262 * sh-dis.c (print_insn_shx): Likewise.
1263 * v850-dis.c (print_insn_v850): Likewise.
1264 * ns32k-dis.c (print_insn_arg): Declare.
1265 (get_displacement, invalid_float): Declare.
1266 (list_search, sign_extend, flip_bytes): Declare return type.
1267 (get_displacement): Likewise.
1268 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1270 (print_insn_ns32k): Make i unsigned.
1271 (invalid_float): Make static. Declare type of val.
1272 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1273 on each for iteration.
1274 * tic30-dis.c (get_indirect_operand): Likewise.
1275 * z8k-dis.c (print_insn_z8001): Declare return type.
1276 (print_insn_z8002): Likewise.
1277 (unparse_instr): Fix sprintf format strings.
1279 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1281 * mips-opc.c: Add "sync.l" and "sync.p".
1284 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1286 * dvp-opc.c (extract_vif_datalen): Rewrite.
1287 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1289 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1291 * dvp-dis.c (print_insn): Print unpack address in hex.
1292 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1293 Don't skip over '*', just record it.
1294 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1295 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1296 Don't skip over '*', just record it.
1297 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1298 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1299 (vif_opcodes): Likewise.
1300 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1301 (vif_macros,vif_macro_count): New globals.
1302 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1303 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1304 (vif_get_wl_cl): New function.
1305 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1308 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1310 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1311 default m68k variant to recognize.
1313 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1314 (ctrl, cobr, mem, ea): Likewise.
1315 (print_addr): Likewise. Remove cast.
1316 (ea): Cast argument of print_addr to bfd_vma.
1318 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1320 (cgen_parse_unsigned_integer): Likewise.
1321 (cgen_parse_address): Likewise.
1323 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1325 * i960-dis.c (ctrl): Add full braces to structure initialization.
1326 (cobr, mem, reg): Likewise.
1327 (ea): Correct parenthesization in expression.
1329 * cgen-asm.c: Include <ctype.h>.
1330 (build_asm_hash_table): Remove unused local variable i.
1331 (cgen_parse_keyword): Add casts to avoid warnings.
1333 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1334 symbol. Fix indentation.
1335 (print_insn_little_arm): Likewise.
1337 start-sanitize-r5900
1338 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1340 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1344 start-sanitize-m32rx
1345 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1347 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1352 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1354 * dvp-opc.c (vif_operand_datalen_special): New global.
1357 start-sanitize-r5900
1358 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1360 * vu0.h (vcallms): Use 'O' for call target operand.
1361 * mips-dis.c (print_insn_arg): Handle 'O'.
1364 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1366 * configure.in: Use AM_DISABLE_SHARED.
1367 * aclocal.m4, configure: Rebuild with libtool 1.2.
1369 start-sanitize-r5900
1370 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1372 * mips-dis.c: Change '%' to '#' in r5900 support.
1376 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1378 These patches are courtesy of Jonathan Walton and Tony Thompson
1379 (athompso@cambridge.arm.com).
1381 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1384 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1385 both the offset and the label closest to the destination.
1387 start-sanitize-r5900
1388 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1390 * vu0.h: New file with cop2/vu0 instructions.
1391 * mips-opc.c: Include vu0.h.
1392 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1394 (print_insn_mips): Do not emit a tab after an instruction if the
1395 first arg is an instruction completer (&). If the next arg is an
1396 escape character (%), then print the next arg verbatim.
1397 * Makefile.am (mips-opc.lo): Depend on vu0.h
1401 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1403 * dvp-opc.c (vif_opcodes): Add stcycl.
1405 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1407 * dvp-dis.c (print_dma): Change length from 16 to 8.
1410 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1412 * m32r-opc.h: Regenerate.
1415 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1417 * dvp-opc.c (print_dest1): Print dest spec again.
1418 (print_vfreg,print_accdest): Likewise.
1419 (vif_unpack_len): Round result up to word boundary.
1422 start-sanitize-vr4320
1423 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1425 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1427 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1429 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1434 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1436 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1437 (print_insn): Do mask comparison on proper opcode word.
1438 Print unsigned values in hex.
1439 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1440 (parse_bc): Catch missing dest.
1441 (parse_vfreg): Replace atoi call with strtol.
1442 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1443 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1444 (extract_gif_eop): New function.
1445 (gif_operands): Update eop entry.
1446 (VGIFOP,VGIFNREGS): Fix calcs.
1447 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1448 (gif_regs): Add entry for unused 11 case.
1449 (print_gif_regs): Print empty list instead of nothing.
1450 (extract_gif_nloop): Fix value calc.
1451 (print_gif_nloop): Always print value, even if 0.
1452 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1453 (vif_operands): Use them for wl,cl fields.
1454 (state_vif_wl,state_vif_cl): New static locals.
1455 (parse_vif_mode): Handle numeric args.
1456 (vif_unpack_len_value,vif_unpack_len): New functions.
1457 (vif_insn_len): Call vif_unpack_len.
1460 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1462 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1464 start-sanitize-cygnus
1465 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1467 * cgen-asm.in: Move insertion of generated routines to top of file.
1468 (insert_normal): Add prototype. Delete `shift' arg.
1469 * cgen-dis.in: Move insertion of generated routines to top of file.
1470 (extract_normal): Add prototype. Delete `shift' arg.
1471 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1472 (print_keyword): Add prototype. Fix type of `attrs' arg.
1475 start-sanitize-vr4320
1476 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1478 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1479 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1482 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1484 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1485 assume that info->symbols is non-empty.
1487 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1489 * alpha-opc.c (cvtqs) There is no such thing.
1490 (cvttq): Missing most of the /*d variants.
1492 start-sanitize-r5900
1493 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1495 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1497 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1498 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1501 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1503 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1504 delayed branches or jumps.
1507 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1509 * dvp-opc.c (vif_operands): Add unpack[u] support.
1510 (vif_opcodes): Ditto.
1511 (*_vif_imrubits): Renamed from *_vif_imrbits.
1513 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1515 * dvp-dis.c (print_insn): Handle word number.
1516 Handle mips address vs vu address.
1517 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1518 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1519 ({insert,extract}_dma_addr): Fix word ofset.
1520 ({insert,print}_gif_regs): Fix encode/decode.
1523 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1525 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1527 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1528 * tic30-dis.c (print_branch): Likewise.
1530 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1531 * dvp-dis.c (dvp_info_mach_type): New function.
1532 (print_insn_dvp): Call it.
1533 (print_vif): Return length of 4 if mpg or direct insn so following
1534 insns get properly disabled.
1535 (print_gif): Fix word order.
1536 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1537 (gif_operands): Fix word order.
1538 (gif_opcodes): Likewise.
1539 ({insert,extract,print}_gif_regs): Likewise.
1540 (gif_regs): Add new register number/name changes.
1541 (dma_opcodes): Add dmarefe insn.
1544 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1546 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1547 saved_symbol code as it is no longer needed.
1549 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1551 * cgen-asm.c: Include symcat.h.
1552 * cgen-dis.c,cgen-opc.c: Ditto.
1553 start-sanitize-cygnus
1554 * cgen-asm.in,cgen-dis.in: Ditto.
1556 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1559 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1561 * dvp-opc.c (extra_dma_flags): Fix typos.
1562 (dma_operands): Fix word numbers.
1563 (dma_opcodes): Likewise.
1564 ({insert,extract}_dma_flags): Likewise.
1567 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1569 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1572 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1574 * dvp-dis.c (print_gif): Complete.
1575 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1576 (state_gif_{nregs,regs,nloop}): New static locals.
1577 (*_gif_*): Complete.
1578 (dvp_opcode_init_{parse,print}): Init gif state locals.
1579 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1580 (vif_insn_len): Handle `unpack'.
1581 ({insert,extract}_dma_flags): Complete.
1584 start-sanitize-r5900
1585 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1587 * mips-opc.c (mula.s): Renamed from multa.s.
1590 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1592 * m32r-opc.[ch]: Regenerate.
1595 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1597 * dvp-opc.c (dma_operands): Rewrite.
1598 (dma_operand_{count,addr}): New globals.
1599 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1600 (insert_dma_addr): Insert value into insn.
1601 (extract_dma_addr): Extract value from insn.
1603 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1605 * dvp-dis.c (print_vu): Handle loi insns.
1606 (print_insn): Likewise.
1607 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1608 (vu_operands): Make LDEST1 a FAKE operand.
1609 (parse_dest1): Allow elided argument.
1610 (print_dest1): Don't print the argument.
1612 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1614 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1615 (print_vfreg): Don't print dest spec.
1616 (parse_accdest): Dest spec is optional.
1617 (print_accdest): Don't print dest spec.
1620 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1622 start-sanitize-cygnus
1623 * Makefile.am (CGENFILES): Update.
1624 * Makefile.in: Regenerate.
1625 * cgen-asm.in (insert_normal): Result is error message now.
1626 Validate value to be inserted.
1627 (insert_insn_normal): Result is error message now.
1628 (@arch@_cgen_assemble_insn): Update.
1630 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1631 arguments. Don't perform validation here.
1632 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1634 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1636 start-sanitize-cygnus
1637 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1638 operand instance list.
1640 * m32r-opc.c: Regenerate.
1642 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1644 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1645 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1647 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1649 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1651 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1653 * configure.in: Get the version number from BFD.
1654 * configure: Rebuild.
1656 From H.J. Lu <hjl@gnu.org>:
1657 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1658 * Makefile.in: Rebuild.
1660 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1662 * m32r-opc.c: Regenerate.
1663 * m32r-opc.h: Regenerate.
1665 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1667 start-sanitize-cygnus
1668 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1669 Ignore ALIAS insns if asked to.
1670 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1672 * m32r-opc.c: Regenerate.
1675 * dvp.opc.c: Nicely format opcode tables.
1676 (vu_operands): New element UFLAGS.
1677 (parse_uflags,print_uflags): New functions.
1678 (vu_upper_opcodes): Add UFLAGS to all insns.
1681 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1683 Fix rac to accept only a0:
1684 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1685 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1686 Introduce OPERAND_GPR.
1687 * d10v-dis.c (print_operand): Likewise.
1689 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1691 start-sanitize-cygnus
1692 * cgen-opc.in: New file.
1693 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1694 * Makefile.am (CGENFILES): Add cgen-opc.in.
1695 * Makefile.in: Regenerate.
1696 * cgen-dis.in (*): Use PTR instead of void *.
1697 (print_insn): Delete unused vars `i', `syntax'.
1699 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1700 (cgen_hw_lookup): Make result const.
1701 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1704 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1706 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1707 (vif_opcodes): Update renamed insns.
1708 * dvp-dis.c (*): Likewise.
1711 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1713 * configure, aclocal.m4: Rebuild with new libtool.
1715 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1717 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1718 instructions use a PC relative branch, not absolute.
1720 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1722 * configure.in: Set libtool_enable_shared rather than
1723 libtool_shared. Remove diversion hack.
1724 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1726 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1728 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1729 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1731 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1733 * tic30-dis.c: New file.
1734 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1735 * configure.in: Handle bfd_tic30_arch.
1736 * Makefile.am: Rebuild dependencies.
1737 (CFILES): Add tic30-dis.c
1738 (ALL_MACHINES): Add tic30-dis.lo.
1739 * configure, Makefile.in: Rebuild.
1741 start-sanitize-m32rx
1742 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1744 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1745 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1746 macwhi-a and macwlo-a instructions.
1750 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1752 * dvp-opc.c, fixed encoding of a bunch of instructions to
1753 be consistent with the asmvu assembler (and inconsistent
1754 with the specification).
1756 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1758 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1759 in the opcode table. The pkemscalf instruction must come first.
1761 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1763 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1766 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1768 * m32r-opc.h (HAVE_CPU_M32R): Define.
1771 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1773 * dvp-dis.c, dvp-opc.c: New files.
1774 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1775 * configure: Regenerate.
1776 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1777 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1778 (mips-dis.lo): Compile with @archdefs@.
1779 * Makefile.in: Regenerate.
1780 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1781 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1784 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1786 * v850-opc.c (insertion routines): If both alignment and size is
1787 wrong then report this.
1789 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1791 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1792 Only recognize instructions for the current target_processor.
1794 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1796 * d10v-dis.c (PC_MASK): Correct value.
1797 (print_operand): If there's a reloc, don't calculate the
1798 address because they could be in different sections.
1800 start-sanitize-cygnus
1801 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1803 * cgen.sh: Rewrite to be like simulator's version.
1804 * Makefile.am (cgen): Update call to cgen.sh.
1805 * Makefile.in: Regenerate
1808 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1810 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1811 instruction after the 4650's "mul" instruction; nobody's using the
1812 4010 these days. If object files someday indicate which processor
1813 variant they're intended for, we can do a better job at this.
1815 start-sanitize-r5900
1816 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1818 * mips-opc.c (c.lt.s): Add r5900 variant.
1822 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1824 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1825 table provided entry size. Use CGEN_INSN_MNEMONIC.
1826 (cgen_parse_keyword): Rewrite.
1827 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1828 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1829 * cgen-opc.c: Clean up pass over `struct foo' usage.
1830 (cgen_keyword_lookup_value): Handle "" entry.
1831 (cgen_keyword_add): Likewise.
1832 start-sanitize-cygnus
1833 * Makefile.am: Add cgen support.
1834 * Makefile.in: Regenerate.
1835 * configure.in: Add cgen support.
1836 * configure: Regenerate.
1837 * aclocal.m4: Regenerate.
1838 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1841 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1843 * mips-opc.c: Add FP_D to s.d instruction flags.
1845 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1847 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1849 start-sanitize-tic80
1850 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1852 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1853 PC relative offset forms before the 15 bit forms. An assembler command
1854 line option now chooses the default.
1857 start-sanitize-r5900
1858 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1860 * mips-opc.c: Add many missing r5900 instructions.
1863 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1865 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1866 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1868 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1870 * configure: Only build libopcodes shared if --enable-shared's value
1871 was `yes', or was set to `*opcodes*'.
1872 * aclocal.m4: Likewise.
1873 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1874 original source of this bit of code. It's not clear what the best fix
1877 start-sanitize-r5900
1878 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1880 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1882 start-sanitize-tic80
1883 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1885 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1886 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1887 offset forms before the 15 bit forms, to default to the long forms.
1890 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1892 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1894 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1896 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1897 symbol if none is present.
1898 (print_insn_big_arm): Prevent examination of stored symbol if
1901 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1903 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1905 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1907 * disassemble.c: Remove disasm_symaddr() function.
1909 * arm-dis.c: Use info->symbol instead of info->flags to determine
1910 if disassmbly should be in Thumb or Arm mode.
1912 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1914 * arm-dis.c: Add support for disassembling Thumb opcodes.
1915 (print_insn_thumb): New function.
1917 * disassemble.c (disasm_symaddr): New function.
1919 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1920 (thumb_opcodes): Table of Thumb opcodes.
1922 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1924 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1926 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1927 and 'v' as operand types.
1929 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1931 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1932 <olivier.carmona@di.epfl.ch>.
1933 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1934 which has a two word opcode with a one word argument.
1936 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1938 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1939 unsigned, not signed.
1940 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1942 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1944 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1945 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1946 (ftrv): Slay the cut-and-paste monster.
1948 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1950 * d10v-dis.c (print_operand):
1951 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1953 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1955 * d10v-opc.c (OPERAND_FLAG): Split into:
1956 (OPERAND_FFLAG, OPERAND_CFLAG) .
1960 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1962 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1963 field for all INSN_MACRO's.
1964 * mips16-opc.c: same
1966 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1968 * mips-opc.c (sync,cache): These are 3900 insns.
1970 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1972 sh-opc.h (sh_table): Remove ftst/nan.
1974 start-sanitize-cygnus
1975 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1977 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1978 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1980 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1984 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1986 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1987 Add tx49 insns and configury.
1990 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1992 * mips-opc.c (ffc, ffs): Fix mask.
1994 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1996 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1999 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2001 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2002 start-sanitize-cygnus
2003 Added VR5400 instructions.
2004 (N5): New cpu-id macro.
2006 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2008 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2010 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2011 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2013 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2015 * v850-dis.c (disassemble): Replace // with /* ... */
2017 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2019 * sparc-opc.c: Add wr & rd for v9a asr's.
2020 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2021 (v9a_asr_reg_names): New variable.
2022 Patch from David Miller <davem@vger.rutgers.edu>.
2024 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2026 * sparc-opc.c (v9notv9a): New insn type.
2027 (IMPDEP): Move to the end to not conflict with edge8 et al.
2028 Patch from David Miller <davem@vger.rutgers.edu>.
2030 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2032 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2034 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2036 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2038 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2040 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2041 of disassemble_info structure to determine if an overlay address
2042 has a matching symbol in low memory.
2044 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2045 new symbol_at_address_func field in disassemble_info structure.
2047 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2049 * v850-opc.c (extract_d22): Use signed arithmatic.
2051 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2053 * mips-opc.c: Three op mult is not an ISA insn.
2055 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2057 * mips-opc.c: Fix formatting.
2059 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2061 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2062 than assuming that char is signed. Explicitly sign extend 16 bit
2063 values, rather than assuming that short is 16 bits.
2064 (OP_sI, OP_J, OP_DIR): Likewise.
2066 start-sanitize-v850e
2067 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2069 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2073 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2075 * v850-opc.c: Fix typo in comment.
2077 * v850-dis.c (disassemble): Add test of processor type when
2078 determining opcodes.
2080 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2082 * configure.in: Use a diversion to set enable_shared before the
2083 arguments are parsed.
2084 * configure: Rebuild.
2086 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2088 * m68k-opc.c (TBL1): Use ! rather than `.
2089 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2091 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2093 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2095 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2097 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2100 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2101 * aclocal.m4: Rebuild with new libtool.
2102 * configure: Rebuild.
2104 start-sanitize-v850e
2105 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2107 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2110 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2112 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2114 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2116 * v850-opc.c (v850_opcodes): Further rearrangements.
2118 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2120 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2122 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2124 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2127 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2129 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2131 * mips16-opc.c: Added mips16 sdbbp.
2134 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2136 * v850-opc.c: Initialise processors field of v850_opcode structure.
2138 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2140 Merge changes from Martin Hunt:
2142 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2144 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2145 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2146 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2148 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2150 * d30v-dis.c (print_insn): First operand of d*i (delayed
2151 branch) instructions is relative.
2153 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2154 (d30v_operand_table): Add IMM6S3 type.
2155 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2157 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2158 and cmp instructions.
2160 * d30v-opc.c: Correct entries for repeat*, and sat*.
2161 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2162 types. Correct several formats.
2164 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2166 * d30v-opc.c (pre_defined_registers): Change control registers.
2168 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2169 SHORT_C2. Manual was incorrect.
2171 * d30v-dis.c (lookup_opcode): Return value now indicates
2172 if an opcode has a short and a long form. Used for deciding
2173 to append a ".s" or ".l".
2174 (print_insn): Append a ".s" to an instruction if it is
2175 the short form and ".l" if it is a long form. Do not append
2176 anything if the instruction has only one possible size.
2178 * d30v-opc.c: Change mulx2h to require an even register.
2179 New form: SHORT_A2; a SHORT_A form that needs an even
2180 register as the first operand.
2182 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2183 instruction was not being disassembled if there were an odd
2184 number of instructions.
2186 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2188 start-sanitize-v850e
2189 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2191 * v850-dis.c (disassemble): Improved display of register lists.
2194 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2196 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2197 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2198 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2199 fandnot1s, fandnot2s.
2201 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2203 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2205 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2207 * cgen-asm.c (cgen_parse_address): New argument resultp.
2208 All callers updated.
2209 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2211 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2213 * mn10200-dis.c (disassemble): PC relative instructions are
2214 relative to the next instruction, not the current instruction.
2216 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2218 * v850-dis.c (disassemble): Only signed extend values that are not
2219 returned by extract functions.
2220 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2222 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2224 * v850-opc.c: Update comments. Remove use of
2225 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2227 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2229 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2231 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2233 * configure: Rebuilt with latest devo autoconf for NT support.
2235 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2237 * v850-dis.c (disassemble): Use curly brace syntax for register
2240 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2241 where r0 is being used as a destination register.
2243 start-sanitize-v850e
2244 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2246 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2249 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2251 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2252 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2253 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2254 Add insns to access SGR and DBR.
2255 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2257 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2259 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2261 start-sanitize-v850e
2262 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2264 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2265 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2268 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2270 * configure (cgen_files): Add support for v850e target.
2271 * configure.in (cgen_files): Add support for v850e target.
2273 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2275 * configure (cgen_files): Add support for v850ea target.
2276 * configure.in (cgen_files): Add support for v850ea target.
2279 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2281 * configure.in (bfd_arc_arch): Add.
2282 * configure: Rebuild.
2283 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2284 * Makefile.in: Rebuild.
2285 * arc-dis.c, arc-opc.c: New files.
2286 * disassemble.c (ARCH_all): Define ARCH_arc.
2287 (disassembler): Add ARC support.
2289 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2291 start-sanitize-v850e
2292 * v850-dis.c (disassemble): Add support for v850EA instructions.
2294 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2295 (v850_opcodes): Add v850EA instructions.
2297 * v850-dis.c (disassemble): Add support for v850E instructions.
2299 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2300 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2301 insert_spe, extract_spe): New Functions.
2302 (v850_opcodes): Add v850E instructions.
2305 * v850-opc.c: Reorganised and re-layed out to improve readability
2308 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2310 * configure: Rebuild with autoconf 2.12.1.
2312 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2314 * aclocal.m4, configure: Rebuild with new automake patches.
2316 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2318 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2319 * acinclude.m4: Just include acinclude.m4 from BFD.
2320 * aclocal.m4, configure: Rebuild.
2322 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2324 * Makefile.am: New file, based on old Makefile.in.
2325 * acconfig.h: New file.
2326 * acinclude.m4: New file.
2327 * stamp-h.in: New file.
2328 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2329 Removed shared library handling; now handled by libtool. Replace
2330 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2331 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2332 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2333 handling in AC_OUTPUT.
2334 * dep-in.sed: Change .o to .lo.
2335 * Makefile.in: Now built with automake.
2336 * aclocal.m4: Now built with aclocal.
2337 * config.in, configure: Rebuild.
2339 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2341 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2343 start-sanitize-r5900
2344 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2346 * mips-opc.c: Fix coding of mtsa.
2349 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2351 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2353 * sparc-dis.c (sorted_opcodes): New static local.
2354 (struct opcode_hash): `opcode' is pointer to const element.
2355 (build_hash): First arg is now table of sorted pointers.
2356 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2357 (compare_opcodes): Update.
2359 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2361 * cgen-opc.c: #include <ctype.h>.
2362 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2363 Handle case insensitive hashing.
2364 (hash_keyword_value): Change type of `value' to unsigned int.
2366 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2368 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2369 precision FP, mark it as such. Likewise for double precision
2370 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2372 start-sanitize-r5900
2373 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2376 start-sanitize-r5900
2377 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2379 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2380 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2383 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2385 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2387 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2388 nesting depth when all the macros are expanded.
2390 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2392 * sparc-opc.c: The fcmp v9a instructions take an integer register
2393 as a destination, not a floating point register. From Christian
2394 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2396 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2398 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2399 syntax. From Roman Hodek
2400 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2402 * i386-dis.c (twobyte_has_modrm): Fix pand.
2404 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2406 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2408 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2410 * arm-dis.c: Add prototypes for arm_decode_shift and
2413 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2415 * mips-opc.c: Add r3900 insns.
2417 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2419 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2420 print delay slot instructions on the same line. When using a PC
2421 relative load, add a comment with the value being loaded if it can
2424 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2426 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2427 to pushS/popS for segment regs and byte constant so that
2428 pushw/popw printed when in 16 bit data mode.
2430 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2431 print cbtw, cwtd in 16 bit data mode.
2432 * i386-dis.c (putop): extra case W to support above.
2434 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2435 address size prefix in 16 bit address mode.
2437 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2439 * sh-dis.c: Reindent. Rename local variable fprintf to
2442 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2444 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2446 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2448 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2450 * mips16-opc.c (mip16_opcodes): same.
2452 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2454 * m68k-opc.c (moveb): Change $d to %d.
2456 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2458 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2459 (twobyte_has_modrm): Likewise.
2461 (OP_MMX, OP_EM, OP_MS): New static functions.
2463 * i386-dis.c: Revert patch of April 4. The output now matches
2466 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2468 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2471 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2473 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2475 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2477 * Makefile.in (install): Depend upon installdirs.
2478 (installdirs): New target.
2480 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2482 From Thomas Graichen <graichen@rzpd.de>:
2483 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2484 * configure: Rebuild.
2486 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2488 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2489 Delete string{,s}.h support.
2491 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2493 * cgen-asm.c (cgen_parse_operand_fn): New global.
2494 (cgen_parse_{{,un}signed_integer,address}): Update call to
2495 cgen_parse_operand_fn.
2496 (cgen_init_parse_operand): New function.
2497 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2498 from cgen_asm_init_parse.
2499 (m32r_cgen_assemble_insn): New operand `errmsg'.
2500 Delete call to as_bad, return error message to caller.
2501 (m32r_cgen_asm_hash_keywords): #if 0 out.
2503 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2505 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2507 [case 'J']: Fix typo in register name.
2509 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2511 * configure.in: Substitute SHLIB_LIBS.
2512 * configure: Rebuild.
2513 * Makefile.in (SHLIB_LIBS): New variable.
2514 ($(SHLIB)): Use $(SHLIB_LIBS).
2516 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2518 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2520 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2522 * disassemble.c (disassembler): Handle m32r.
2524 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2526 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2527 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2528 * Makefile.in (CFILES): Add them.
2529 (ALL_MACHINES): Add them.
2530 (dependencies): Regenerate.
2531 * configure.in (cgen_files): New variable.
2532 (bfd_m32r_arch): Add entry.
2533 * configure: Regenerate.
2535 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2537 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2538 * configure: Rebuild.
2540 * Makefile.in: Rebuild dependencies.
2542 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2544 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2547 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2549 * Branched binutils 2.8.
2551 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2553 * m10200-dis.c: Rename from mn10200-dis.c.
2554 * m10200-opc.c: Rename from mn10200-opc.c.
2555 * m10300-dis.c: Rename from mn10300-dis.c
2556 * m10300-opc.c: Rename from mn10300-opc.c.
2557 * Makefile.in: Update accordingly.
2559 * mips16-opc.c: Add mul and dmul macros.
2561 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2563 * makefile.vms: Update CFLAGS, add clean target.
2565 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2567 * mips-opc.c: Add "wait". From Ralf Baechle
2568 <ralf@gnu.ai.mit.edu>.
2570 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2571 * configure, config.in: Rebuild.
2572 * sysdep.h: Include <stdlib.h> if it exists.
2573 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2575 * Makefile.in: Rebuild dependencies.
2577 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2579 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2580 Andrew Bray <andy@madhouse.demon.co.uk>.
2582 * mips-opc.c: Add cast when setting mips_opcodes.
2584 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2586 * v850-dis.c (disassemble): Fix sign extension problem.
2587 * v850-opc.c (extract_d*): Fix sign extension problems to make
2588 disassembly calculate branch offsets correctly.
2590 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2592 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2594 * mips-opc.c: Add dctr and dctw.
2596 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2598 * d30v-dis.c (print_insn): Change the way signed constants
2601 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2603 * Makefile.in (BFD_H): New variable.
2604 (HFILES): New variable.
2605 (CFILES): Add all C files.
2606 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2607 Delete old dependencies, and build new ones.
2608 * dep-in.sed: New file.
2610 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2612 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2614 start-sanitize-coldfire
2615 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2617 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2620 end-sanitize-coldfire
2621 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2623 * mn10200-opc.c: Change "trap" to "syscall".
2624 * mn10300-opc.c: Add new "syscall" instruction.
2626 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2628 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2629 mulul insns on the coldfire.
2631 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2633 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2634 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2635 (print_insn_little_arm): Likewise.
2637 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2639 Based on patches from H.J. Lu <hjl@lucon.org>:
2640 * i386-dis.c (fetch_data): Add prototype.
2641 * m68k-dis.c (fetch_data): Add prototype.
2642 (dummy_print_address): Add prototype. Make static.
2643 * ppc-opc.c (valid_bo): Add prototype.
2644 * sparc-dis.c (build_hash_table): Add prototype.
2645 (is_delayed_branch, compute_arch_mask): Add prototypes.
2646 (print_insn_sparc): Make several local variables const.
2647 (compare_opcodes): Change arguments to const PTR. Add prototype.
2648 * sparc-opc.c (arg): Change name field to be const.
2649 (lookup_name, lookup_value): Add prototypes. Change table and
2650 name parameters to be const.
2651 (sparc_encode_asi): Change name parameter to be const.
2652 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2653 (sparc_encode_sparclet_cpreg): Likewise.
2654 (sparc_decode_asi): Change return type to be const.
2655 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2656 (sparc_decode_sparclet_cpreg): Likewise.
2658 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2660 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2661 Solaris doesn't like the combined options, and the -f is
2663 (stamp-tshlink, install): Likewise.
2665 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2667 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2670 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2672 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2674 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2676 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2679 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2681 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2683 start-sanitize-tic80
2684 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2686 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2688 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2690 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2693 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2695 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2696 floatformat_to_double to make portable.
2697 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2700 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2702 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2703 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2705 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2707 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2708 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2710 start-sanitize-tic80
2711 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2713 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2714 (OFF_SL_BR_SCALED): ... to this, and added the flag
2715 TIC80_OPERAND_BASEREL to the flags word.
2716 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2720 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2722 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2723 Change mips_opcodes from const array to a pointer,
2724 and change bfd_mips_num_opcodes from const int to int,
2725 so that we can increase the size of the mips opcodes table
2728 start-sanitize-tic80
2729 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2731 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2732 store BITNUM values in the table in one's complement form
2733 to match behavior when assembler is given a raw numeric
2734 value for a BITNUM operand.
2735 * tic80-dis.c (print_operand_bitnum): Ditto.
2738 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2740 * d30v-opc.c: Removed references to FLAG_X.
2742 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2744 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2746 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2748 * Makefile.in: Added d30v object files.
2749 * configure: (bfd_d30v_arch) Rebuilt.
2750 * configure.in: (bfd_d30v_arch) Added new case.
2751 * d30v-dis.c: New file.
2752 * d30v-opc.c: New file.
2753 * disassemble.c (disassembler) Add entry for d30v.
2755 start-sanitize-tic80
2756 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2758 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2759 representations for the floating point BITNUM values.
2761 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2763 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2764 in the table in one's complement form, as they appear in the
2766 (tic80_symbol_to_value): Use macros to access predefined
2768 (tic80_value_to_symbol): Ditto.
2769 (tic80_next_predefined_symbol): New function.
2770 * tic80-dis.c (print_operand_bitnum): Remove code that did
2771 one's complement for BITNUM values.
2774 start-sanitize-r5900
2775 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2777 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2780 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2782 * makefile.vms: Remove 8 bit characters. Update to latest
2785 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2787 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2789 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2791 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2792 (IMM24_PCREL): Likewise.
2794 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2796 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2797 address for an extended PC relative instruction that is not a
2800 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2802 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2805 start-sanitize-tic80
2806 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2808 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2809 (tic80_opcodes): Sort entries so that long immediate forms
2810 come after short immediate forms, making it easier for
2811 assembler to select the right one for a given operand.
2814 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2816 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2818 (print_insn_mips16): Likewise.
2820 start-sanitize-r5900
2821 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2823 * mips-opc.c: add r5900.
2826 start-sanitize-tic80
2827 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2829 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2830 a symbol class that restricts translation to just that
2831 class (general register, condition code, etc).
2833 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2835 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2836 and REG_DEST_E for register operands that have to be
2837 an even numbered register. Add REG_FPA for operands that
2838 are one of the floating point accumulator registers.
2839 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2840 (tic80_opcodes): Change entries that need even numbered
2841 register operands to use the new operand table entries.
2842 Add "or" entries that are identical to "or.tt" entries.
2845 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2847 * mips16-opc.c: Add new cases of exit instruction for
2849 * mips-dis.c (print_mips16_insn_arg): Display floating point
2850 registers in operands of exit instruction. Print `$' before
2851 register names in operands of entry and exit instructions.
2853 start-sanitize-tic80
2854 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2856 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2857 pairs for all predefined symbols recognized by the assembler.
2858 Also used by the disassembling routines.
2859 (tic80_symbol_to_value): New function.
2860 (tic80_value_to_symbol): New function.
2861 * tic80-dis.c (print_operand_control_register,
2862 print_operand_condition_code, print_operand_bitnum):
2863 Remove private tables and use tic80_value_to_symbol function.
2866 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2868 * d10v-dis.c (print_operand): Change address printing
2869 to correctly handle PC wrapping. Fixes PR11490.
2871 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2873 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2876 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2878 * mips-dis.c (print_insn_mips16): Set insn_info information.
2879 (print_mips16_insn_arg): Likewise.
2881 * mips-dis.c (print_insn_mips16): Better handling of an extend
2882 opcode followed by an instruction which can not be extended.
2884 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2886 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2887 coldfire moveb instruction to not allow an address register as
2888 destination. Although the documentation does not indicate that
2889 this is invalid, experiments uncovered unexpected behavior.
2890 Added a comment explaining the situation. Thanks to Andreas
2891 Schwab for pointing this out to me.
2893 start-sanitize-tic80
2894 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2896 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2897 entries are presorted so that entries with the same mnemonic are
2898 adjacent to each other in the table. Sort the entries for each
2899 instruction so that this is true.
2902 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2904 * m68k-dis.c: Include <libiberty.h>.
2905 (print_insn_m68k): Sort the opcode table on the most significant
2906 nibble of the opcode.
2908 start-sanitize-tic80
2909 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2911 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2912 "vsub", "vst", "xnor", and "xor" instructions.
2913 (V_a1): Renamed from V_a, msb of accumulator reg number.
2914 (V_a0): Add macro, lsb of accumulator reg number.
2916 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2918 * tic80-dis.c (print_insn_tic80): Broke excessively long
2919 function up into several smaller ones and arranged for
2920 the instruction printing function to be callable recursively
2921 to print vector instructions that have both a load and a
2922 math instruction packed into a single opcode.
2923 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2924 to explain why it comes after the other vector opcodes.
2927 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2929 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2930 move insns to handle immediate operands.
2932 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2934 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2935 fix operand mask in the "moveml" entries for the coldfire.
2937 start-sanitize-tic80
2938 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2940 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2941 New macros for building vector instruction opcodes.
2942 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2943 FMT_LI, which were unused. The field is now a flags field.
2944 Remove some opcodes that are possible, but illegal, such
2945 as long immediate instructions with doubles for immediate
2946 values. Add "vadd" and "vld" instructions.
2948 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2950 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2951 the order more logical. Move the shift alias instructions ("rotl",
2952 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2953 interspersed with the regular sr.x and sl.x instructions. Add
2954 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2955 "sub", "subu", "swcr", and "trap".
2957 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2959 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2960 (OFF_SL_PC): Renamed from OFF_SL.
2961 (OFF_SS_BR): New operand type for base relative operand.
2962 (OFF_SL_BR): New operand type for base relative operand.
2963 (REG_BASE): New operand type for base register operand.
2964 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2965 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2966 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2968 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2969 10 char field, padded with spaces on rhs, rather than a string
2970 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2971 than old TIC80_OPERAND_RELATIVE. Add support for new
2972 TIC80_OPERAND_BASEREL flag bit.
2974 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2976 * tic80-dis.c (print_insn_tic80): Print floating point operands
2978 * tic80-opc.c (SPFI): Add single precision floating point
2979 immediate operand type.
2980 (ROTATE): Add rotate operand type for shifts.
2981 (ENDMASK): Add for shifts.
2982 (n): Macro for the 'n' bit.
2983 (i): Macro for the 'i' bit.
2984 (PD): Macro for the 'PD' field.
2985 (P2): Macro for the 'P2' field.
2986 (P1): Macro for the 'P1' field.
2987 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2991 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2993 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2994 adding in current address for pc-relative operands.
2996 start-sanitize-tic80
2997 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2999 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3000 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3001 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3002 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3003 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3004 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3005 (REG_SCALED, LSI_SCALED): New operand types.
3006 (E): New macro for 'E' bit at bit 27.
3007 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3008 opcodes, including the various size flavors (b,h,w,d) for
3009 the direct load and store instructions.
3011 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3013 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3015 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3016 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3017 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3018 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3019 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3020 masks with "MASK_* & ~M_*" to get the M bit reset.
3021 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3023 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3025 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3026 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3027 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3029 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3030 CC, SICR, and LICR table entries.
3031 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3032 "bcnd", and "brcr" opcodes.
3035 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3037 * ppc-opc.c (powerpc_operands): Make comment match the
3038 actual fields (no shift field).
3039 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3040 start-sanitize-tic80
3041 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3042 partial implementation, work in progress.
3043 * tic80-opc.c (tic80_operands): Begin construction operands table.
3044 (tic80_opcodes): Continue populating opcodes table and start
3045 filling in the operand indices.
3046 (tic80_num_opcodes): Add this.
3049 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3051 * m68k-opc.c: Add #B case for moveq.
3053 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3055 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3056 before they are used.
3058 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3060 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3061 for "breakpoint" instruction.
3063 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3065 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3066 (dep): Use ALL_CFLAGS rather than CFLAGS.
3068 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3070 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3073 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3075 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3076 start-sanitize-tic80
3077 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3080 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3082 * mips16-opc.c: Add "abs".
3084 start-sanitize-tic80
3085 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3087 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3088 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3089 (disassembler): Add bfd_arch_tic80 support to set disassemble
3090 to print_insn_tic80.
3091 * tic80-dis.c (print_insn_tic80): Add stub.
3093 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3095 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3096 * configure: Regenerate with autoconf.
3097 * tic80-dis.c: Add file.
3098 * tic80-opc.c: Add file.
3101 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3103 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3105 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3107 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3108 (mn10200_opcodes): Use it for some logicals and btst insns.
3109 Add "break" and "trap" instructions.
3111 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3113 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3115 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3117 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3118 relative load or add now depends upon whether the instruction is
3121 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3123 * mn10200-dis.c: Finish writing disassembler.
3124 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3125 Fix mask for "jmp (an)".
3127 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3128 handle endianness issues for mn10300.
3130 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3132 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3134 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3135 instruction. Fix opcode field for "movb (imm24),dn".
3137 * mn10200-opc.c (mn10200_operands): Fix insertion position
3140 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3142 * mn10200-opc.c: Create mn10200 opcode table.
3143 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3144 but moving along nicely.
3146 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3148 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3150 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3152 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3153 specifiers for fmovem* instructions.
3155 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3157 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3159 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3161 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3164 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3166 * mn10300-opc.c: Add some comments explaining the various
3169 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3171 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3173 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3176 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3177 operand specifiers in fmovm* instructions.
3179 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3181 * ppc-opc.c (insert_li): Give an error if the offset has the two
3182 least significant bits set.
3184 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3186 * mips-dis.c (print_insn_mips16): Separate the instruction from
3187 the arguments with a tab, not a space.
3189 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3191 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3194 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3197 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3199 * configure: Rebuild with autoconf 2.12.
3201 Add support for mips16 (16 bit MIPS implementation):
3202 * mips16-opc.c: New file.
3203 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3204 (mips16_reg_names): New static array.
3205 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3206 after seeing a 16 bit symbol.
3207 (print_insn_little_mips): Likewise.
3208 (print_insn_mips16): New static function.
3209 (print_mips16_insn_arg): New static function.
3210 * mips-opc.c: Add jalx instruction.
3211 * Makefile.in (mips16-opc.o): New target.
3212 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3213 * configure: Rebuild.
3215 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3217 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3218 operand specifiers in *save, *restore and movem* instructions.
3220 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3223 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3224 register operands for immediate arithmetic, not, neg, negx, and
3225 set according to condition instructions.
3227 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3228 specifier of the effective-address operand in immediate forms of
3229 arithmetic instructions. The specifier for the immediate operand
3230 notes how and where the constant will be stored.
3232 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3234 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3237 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3240 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3242 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3244 * mn10300-dis.c (disassemble): Handle register lists.
3246 * mn10300-opc.c: Fix handling of register list operand for
3247 "call", "ret", and "rets" instructions.
3249 * mn10300-dis.c (disassemble): Print PC-relative and memory
3250 addresses symbolically if possible.
3251 * mn10300-opc.c: Distinguish between absolute memory addresses,
3252 pc-relative offsets & random immediates.
3254 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3256 (disassemble): Handle SPLIT and EXTENDED operands.
3258 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3260 * mn10300-dis.c: Rough cut at printing some operands.
3262 * mn10300-dis.c: Start working on disassembler support.
3263 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3265 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3267 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3269 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3271 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3273 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3275 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3276 register argument is calls and jmp instructions.
3278 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3280 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3281 getx operand. Fix opcode for mulqu imm,dn.
3283 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3285 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3286 in MN10300_OPERAND_SPLIT operands for how many bits
3287 appear in the basic insn word. Add IMM32_HIGH24,
3288 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3289 (mn10300_opcodes): Use new operands as needed.
3291 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3292 for bset, bclr, btst instructions.
3293 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3295 * mn10300-opc.c (mn10300_operands): Remove many redundant
3296 operands. Update opcode table as appropriate.
3297 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3298 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3300 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3302 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3303 operands (for indexed load/stores). Fix bitpos for DI
3304 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3305 few instructions that insert immediates/displacements in the
3306 middle of the instruction. Add IMM8E for 8 bit immediate in
3307 the extended part of an instruction.
3308 (mn10300_operands): Use new opcodes as appropriate.
3310 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3312 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3313 sequential so the assembler never parallelizes it with
3316 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3318 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3319 a data/address register that appears in register field 0
3320 and register field 1.
3321 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3323 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3325 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3326 standard disassembly.
3328 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3329 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3330 Recategorize PALcode instructions.
3332 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3334 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3336 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3338 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3339 there are no operand types.
3341 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3343 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3345 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3347 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3349 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3351 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3353 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3354 and sst.w instructions.
3356 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3359 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3361 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3364 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3366 * ppc-opc.c (PPCPWR2): Define.
3367 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3370 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3372 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3373 field for movhu instruction.
3375 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3376 cast value to "long" not "signed long" to keep hpux10
3379 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3381 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3384 * mn10300-opc.c (FMT*): Remove definitions.
3386 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3387 for shift-by-register opcodes.
3389 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3390 into [AD][MN][01] for encoding the position of the register
3393 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3395 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3396 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3398 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3400 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3401 Fix various typos. Add "PAREN" operand.
3402 (MEM, MEM2): Define.
3403 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3404 operands. Fix several typos.
3406 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3409 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3411 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3412 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3414 (mn10300_opcodes): Break opcode format out into its own field.
3415 Update many operand fields to deal with signed vs unsigned
3416 issues. Fix one or two typos in the "mov" instruction
3417 opcode, mask and/or operand fields.
3419 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3421 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3422 m68851 wasn't reset.
3424 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3426 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3427 all opcodes. Very rough cut at operands for all opcodes.
3429 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3432 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3434 * mn10200-opc.c, mn10300-opc.c: New files.
3435 * mn10200-dis.c, mn10300-dis.c: New files.
3436 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3437 * disassemble.c: Break mn10x00 support into 10200 and 10300
3439 * configure.in: Likewise.
3440 * configure: Rebuilt.
3442 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3444 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3446 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3448 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3450 * disassemble (ARCH_mn10x00): Define.
3451 (disassembler): Handle bfd_arch_mn10x00.
3452 * configure.in: Recognize bfd_mn10x00_arch.
3453 * configure: Rebuilt.
3455 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3457 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3458 accordingly. Don't declare functions using op_rtn.
3460 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3462 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3463 params to be more standard.
3464 * (disassemble): Print absolute addresses and symbolic names for
3465 branch and jump targets.
3466 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3468 * (v850_opcodes): Add breakpoint insn.
3470 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3472 * m68k-opc.c: Move the fmovemx data register cases before the
3473 other cases, so that they get recognized before the data register
3474 does gets treated as a degenerate register list.
3476 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3478 * mips-opc.c: Add a case for "div" and "divu" with two registers
3479 and a destination of $0.
3481 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3483 * mips-dis.c (print_insn_arg): Add prototype.
3484 (_print_insn_mips): Ditto.
3486 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3488 * mips-dis.c (print_insn_arg): Print condition code registers as
3491 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3493 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3495 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3497 * v850-dis.c (disassemble): Make static. Provide prototype.
3499 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3501 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3504 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3506 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3507 ']' characters into the output stream.
3508 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3509 Add "memop" field to all opcodes (for the disassembler).
3510 Reorder opcodes so that "nop" comes before "mov" and "jr"
3511 comes before "jarl".
3513 * v850-dis.c (print_insn_v850): Fix typo in last change.
3515 * v850-dis.c (print_insn_v850): Properly handle disassembling
3516 a two byte insn at the end of a memory region when the memory
3517 region's size is only two byte aligned.
3519 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3521 * v850-dis.c (v850_reg_names): Define.
3522 (v850_sreg_names, v850_cc_names): Likewise.
3523 (disassemble): Very rough cut at printing operands (unformatted).
3525 * v850-opc.c (BOP_MASK): Fix.
3526 (v850_opcodes): Fix mask for jarl and jr.
3528 * v850-dis.c: New file. Skeleton for disassembler support.
3529 * Makefile.in Remove v850 references, they're not needed here.
3530 * configure.in: Add v850-dis.o when building v850 toolchains.
3531 * configure: Rebuilt.
3532 * disassemble.c (disassembler): Call v850 disassembler.
3534 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3535 (insert_d8_6, extract_d8_6): New functions.
3536 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3537 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3539 (IF4A, IF4B): Use "D7" instead of "D7S".
3540 (IF4C, IF4D): Use "D8_7" instead of "D8".
3541 (IF4E, IF4F): New. Use "D8_6".
3542 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3543 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3545 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3546 (v850_operands): Change D16 to D16_15, use special insert/extract
3547 routines. New new D16 that uses the generic insert/extract code.
3548 (IF7A, IF7B): Use D16_15.
3549 (IF7C, IF7D): New. Use D16.
3550 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3552 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3553 message. Issue an error if the branch offset is odd.
3555 * v850-opc.c: Add notes about needing special insert/extract
3556 for all the load/store insns, except "ld.b" and "st.b".
3558 * v850-opc.c (insert_d22, extract_d22): New functions.
3559 (v850_operands): Use insert_d22 and extract_d22 for
3561 (insert_d9): Fix range check.
3563 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3565 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3566 and set bits field to D9 and D22 operands.
3568 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3570 * v850-opc.c (v850_operands): Define SR2 operand.
3571 (v850_opcodes): "ldsr" uses R1,SR2.
3573 * v850-opc.c (v850_opcodes): Fix opcode specs for
3574 sld.w, sst.b, sst.h, sst.w, and nop.
3576 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3578 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3579 end of the opcode table.
3581 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3583 * d10v-opc.c (pre_defined_registers): Added register pairs,
3584 "r0-r1", "r2-r3", etc.
3586 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3588 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3589 Create I16U for an unsigned 16bit mmediate operand.
3590 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3592 * v850-opc.c (v850_operands): Define EP operand.
3593 (IF4A, IF4B, IF4C, IF4D): Use EP.
3595 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3596 with immediate operand, "movhi". Tweak "ldsr".
3598 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3599 correct. Get sld.[bhw] and sst.[bhw] closer.
3601 * v850-opc.c (v850_operands): "not" is a two byte insn
3603 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3605 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3607 * v850-opc.c (two): Get order of words correct.
3609 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3611 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3612 register source and destination operands.
3613 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3615 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3616 same thinko in "trap" opcode.
3618 * v850-opc.c (v850_opcodes): Add initializer for size field
3621 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3622 Add D8 for 8-bit unsigned field in short load/store insns.
3623 (IF4A, IF4D): These both need two registers.
3624 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3625 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3626 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3627 for "ldsr" and "stsr".
3628 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3631 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3632 short store word (sst.w).
3634 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3636 * v850-opc.c (v850_operands): Added insert and extract fields,
3637 pointers to functions that handle unusual operand encodings.
3639 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3641 * v850-opc.c (v850_opcodes): Enable "trap".
3643 * v850-opc.c (v850_opcodes): Fix order of displacement
3644 and register for "set1", "clr1", "not1", and "tst1".
3646 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3648 * v850-opc.c (v850_operands): Add "B3" support.
3649 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3652 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3654 * v850-opc.c: Close unterminated comment.
3656 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3658 * v850-opc.c (v850_operands): Add flags field.
3659 (v850_opcodes): add move opcodes.
3661 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3663 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3664 * configure: (bfd_v850v_arch) Add new case.
3665 * configure.in: (bfd_v850_arch) Add new case.
3666 * v850-opc.c: New file.
3668 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3670 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3672 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3674 * d10v-opc.c: Add additional information to the opcode
3675 table to help determinine which instructions can be done
3678 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3680 * mpw-make.sed: Update editing of include pathnames to be
3683 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3685 * arm-opc.h: Added "bx" instruction definition.
3687 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3689 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3691 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3693 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3695 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3697 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3699 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3701 * makefile.vms: Update for alpha-opc changes.
3703 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3705 * i386-dis.c (print_insn_i386): Actually return the correct value.
3706 (ONE, OP_ONE): #ifdef out; not used.
3708 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3710 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3711 Changed subi operand type to treat 0 as 16.
3713 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3715 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3718 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3720 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3721 memory transfer instructions. Add new format string entries %h and %s.
3722 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3725 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3727 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3728 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3730 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3732 * alpha-dis.c (print_insn_alpha_osf): Remove.
3733 (print_insn_alpha_vms): Remove.
3734 (print_insn_alpha): Make globally visible. Chose the register
3735 names based on info->flavour.
3736 * disassemble.c: Always return print_insn_alpha for the alpha.
3738 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3740 * d10v-dis.c (dis_long): Handle unknown opcodes.
3742 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3744 * d10v-opc.c: Changes to support signed and unsigned numbers.
3745 All instructions with the same name that have long and short forms
3746 now end in ".l" or ".s". Divs added.
3747 * d10v-dis.c: Changes to support signed and unsigned numbers.
3749 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3751 * d10v-dis.c: Change all functions to use info->print_address_func.
3753 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3755 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3756 move ccr/sr insns more strict so that the disassembler only
3757 selects them when the addressing mode is data register.
3759 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3760 * d10v-opc.c (pre_defined_registers): Declare.
3761 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3762 to pick a better name for the registers.
3764 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3766 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3767 operands for fexpand and fpmerge. From Christian Kuehnke
3768 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3770 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3772 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3773 print routine. Take new regnames and cpumask arguments.
3774 Kill the environment variable nonsense.
3775 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3776 (print_insn_alpha_vms): New function. Do VMS style regnames.
3777 * disassemble.c (disassembler): Test bfd flavour to pick
3778 between OSF and VMS routines. Default to OSF.
3780 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3782 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3783 * configure: Rebuild.
3784 * Makefile.in (install): Use @INSTALL_SHLIB@.
3786 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3788 * configure: (bfd_d10v_arch) Add new case.
3789 * configure.in: (bfd_d10v_arch) Add new case.
3790 * d10v-dis.c: New file.
3791 * d10v-opc.c: New file.
3792 * disassemble.c (disassembler) Add entry for d10v.
3794 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3796 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3797 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3799 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3801 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3802 distinguish between variants of the instruction set.
3803 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3804 distinguish between variants of the instruction set.
3806 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3808 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3809 the 8086 instruction set.
3810 * i386-dis.c: General cleanups. Make most things static. Add
3811 prototypes. Get rid of static variables aflags and dflags. Pass
3812 them as args (to almost everything).
3814 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3816 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3818 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3820 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3821 if the next arg is marked with SRC_IN_DST. Gross.
3823 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3824 we're looking for and find EXR.
3826 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3827 if we're looking for KBIT and we don't find it.
3829 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3832 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3833 3bit immediate operands.
3835 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3837 * Released binutils 2.7.
3839 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3840 <kkaempf@progis.ac-net.de>.
3842 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3844 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3846 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3848 * sparc-dis.c (print_insn_sparclite): New routine to print
3849 sparclite instructions.
3851 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3853 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3855 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3857 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3858 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3859 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3861 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3863 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3864 Use autoconf-set values.
3865 (docdir, oldincludedir): Removed.
3866 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3868 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3870 * alpha-opc.c: New file.
3871 * alpha-opc.h: Remove.
3872 * alpha-dis.c: Complete rewrite to use new opcode table.
3873 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3874 * configure: Rebuild with autoconf 2.10.
3875 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3876 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3878 (alpha-opc.o): New target.
3880 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3882 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3883 Set imm_added_to_rs1 even if the source and destination register
3886 * sparc-opc.c: Add some two operand forms of the wr instruction.
3888 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3890 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3893 * disassemble.c (disassembler): Handle H8/S.
3894 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3896 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3898 * sparc-opc.c: Add beq/teq as aliases for be/te.
3900 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3901 <sergei@msil.sps.mot.com>.
3903 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3905 * makefile.vms: New file.
3907 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3909 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3911 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3914 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3916 * i386-dis.c (OP_OFF): Call append_prefix.
3918 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3920 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3921 unsigned long to silence a warning from the Solaris PowerPC
3924 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3926 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3928 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3930 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3932 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3933 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3934 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3935 cpush, cpusha, cpull sparclet insns.
3937 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3939 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3941 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3943 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3944 Set F_FLOAT on other floating point instructions.
3946 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3948 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3950 (powerpc_opcodes): Add 860/821 specific SPRs.
3952 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3954 * configure.in: Permit --enable-shared to specify a list of
3955 directories. Set and substitute BFD_PICLIST.
3956 * configure: Rebuild.
3957 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3958 uses. Set to @BFD_PICLIST@.
3960 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3962 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3963 not "abs", which may be needed for the absolute in something
3964 like btst #0,@10:8. Print L_3 immediates separately from other
3965 immediates. Change ABSMOV reference to ABS8MEM.
3967 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3969 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3970 (current_arch_mask): New static global.
3971 (compute_arch_mask): New static function.
3972 (print_insn_sparc): Delete sparc_v9_p. New static local
3973 current_mach. Resort opcode table if current_mach changes.
3974 Generalize "insn not supported" test.
3975 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3976 Delete test for v9/!v9.
3977 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3979 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3980 (brfcx): Renamed to FBRX.
3981 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3982 coprocessor mnemonics are not supported on the sparclet).
3983 (condf): Renamed to CONDF.
3984 (SLCBCC2): Delete F_ALIAS flag.
3986 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3988 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3989 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3991 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3993 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3994 that the shared library version number is set correctly.
3996 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3998 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3999 Miles Bader <miles@gnu.ai.mit.edu>.
4000 * configure: Rebuild.
4002 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4004 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4007 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4009 * configure: Rebuild with autoconf 2.8.
4011 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4013 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4014 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4016 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4018 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4019 since they appear as targets in Makefile.in.
4020 * configure: Rebuild.
4022 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4024 * mpw-make.sed: Edit out shared library support bits.
4026 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4028 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4029 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4030 (sparc_opcodes): Add sparclet insns.
4031 (sparclet_cpreg_table): New static local.
4032 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4033 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4035 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4037 * i386-dis.c (index16): New static variable.
4038 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4040 (OP_indirE): Return result of OP_E.
4041 (OP_E): Check for 16 bit addressing mode, and disassemble
4042 correctly. Optimised 32 bit case a little. Don't print
4043 "(base,index,scale)" when sib specifies only an offset.
4045 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4047 * configure.in: Set and substitute SHLIB_DEP.
4048 * configure: Rebuild.
4049 * Makefile.in (SHLIB_DEP): New variable.
4050 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4051 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4052 COMMON_SHLIB, add them to piclist with appropriate modifications.
4053 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4054 here: just use piclist.
4056 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4058 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4059 (print_insn_sparc): Rewrite v9/not-v9 tests.
4060 (compare_opcodes): Likewise.
4061 * sparc-opc.c (MASK_<ARCH>): Define.
4062 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4063 (sparclet,v6notv9): Define.
4064 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4065 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4067 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4069 * configure.in: Call AC_PROG_CC before configure.host.
4070 * configure: Rebuild.
4072 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4074 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4076 * i386-dis.c (onebyte_has_modrm): New static array.
4077 (twobyte_has_modrm): New static array.
4078 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4080 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4082 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4085 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4087 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4090 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4092 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4093 m68010up, not just m68020up | cpu32.
4095 * Makefile.in (SONAME): New variable.
4096 ($(SHLINK)): Make a link to the transformed name, as well.
4097 (stamp-tshlink): New target.
4098 (install): Skip stamp-tshlink during install.
4100 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4102 * configure.in: Call AC_ARG_PROGRAM.
4103 * configure: Rebuild.
4104 * Makefile.in (program_transform_name): New variable.
4105 (install): Transform library name before installing it.
4107 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4109 * i960-dis.c (mem): Add HX dcinva instruction.
4111 Support for building as a shared library, based on patches from
4112 Alan Modra <alan@spri.levels.unisa.edu.au>:
4113 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4114 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4115 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4116 * configure: Rebuild.
4117 * Makefile.in (ALLLIBS): New variable.
4118 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4119 (COMMON_SHLIB, SHLINK): New variables.
4120 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4121 (STAGESTUFF): Remove variable.
4122 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4123 (stamp-piclist, piclist): New targets.
4124 ($(SHLIB), $(SHLINK)): New targets.
4125 ($(OFILES)): Depend upon stamp-picdir.
4126 (disassemble.o): Build twice if PICFLAG is set.
4127 (MOSTLYCLEAN): Add pic/*.o.
4128 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4129 (distclean): Remove pic and stamp-picdir.
4130 (install): Install shared libraries.
4131 (stamp-picdir): New target.
4133 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4135 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4136 Print unknown instruction as "unknown", rather than in hex.
4138 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4140 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4142 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4144 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4146 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4148 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4149 when necessary. From Ulrich Drepper
4150 <drepper@myware.rz.uni-karlsruhe.de>.
4152 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4154 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4155 sparc_num_opcodes. Update architecture enum values.
4156 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4157 (sparc_opcode_lookup_arch): New function.
4158 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4159 (sparc_opcodes): Add v9a shutdown insn.
4161 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4163 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4164 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4166 (print_insn_sparc64): Deleted.
4167 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4170 * sparc-opc.c (architecture_pname): Add v9a.
4172 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4174 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4175 incorrectly defined as 0x16 when it should be 0x15.
4176 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4177 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4178 excb (exception barrier) which is defined in the Alpha
4179 Architecture Handbook version 2.
4180 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4181 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4182 disassembled as or, for example.
4184 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4186 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4187 (_print_insn_mips): Change i from int to unsigned int.
4189 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4191 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4192 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4194 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4196 * i386-dis.c: Added Pentium Pro instructions.
4198 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4200 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4203 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4205 * sh-opc.h (sh_nibble_type): Added REG_B.
4206 (sh_arg_type): Added A_REG_B.
4207 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4209 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4211 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4213 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4215 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4217 * Makefile.in (distclean): Remove stamp-h. From Ronald
4218 F. Guilmette <rfg@monkeys.com>.
4220 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4222 From David Mosberger-Tang <davidm@azstarnet.com>:
4223 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4226 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4228 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4229 (sh_table): Added many SH3 opcodes.
4230 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4232 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4234 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4235 (subco,subco.): Mark this PPC, not PPCCOM.
4237 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4239 * configure: Rebuild with autoconf 2.7.
4241 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4243 * configure: Rebuild with autoconf 2.6.
4245 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4247 * configure.in: Sort list of architectures. Accept but do nothing
4248 for alliant, convex, pyramid, romp, and tahoe.
4250 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4252 * a29k-dis.c (print_special): Change num to unsigned int.
4254 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4256 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4259 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4261 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4262 * configure: Rebuilt.
4264 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4266 * configure.in: Add case for bfd_i860_arch.
4267 * configure: Rebuild.
4269 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4271 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4272 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4273 (NEXTDOUBLE): Likewise.
4274 (print_insn_m68k): Don't match fmoveml if there is more than one
4275 register in the list.
4276 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4278 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4280 * m68k-opc.c: Use #W rather than #w.
4281 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4283 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4285 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4286 and likewise for all the dbxx opcodes.
4288 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4290 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4292 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4294 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4295 the VR4100 specific instructions to the mips_opcodes structure.
4297 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4299 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4300 ugly Metrowerks bug in CW6, is fixed in CW7.
4302 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4304 * ppc-opc.c (whole file): Add flags for common/any support.
4306 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4308 * Makefile.in (BISON): Remove macro.
4309 (FLAGS_TO_PASS): Remove BISON.
4311 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4313 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4315 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4316 instructions that take no args by looking at the match mask.
4317 (print_insn_arg): Always print "%" before register names.
4318 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4319 [case '_']: Don't print "@#" before address.
4320 [case 'J']: Use "%s" as format string, not register name.
4321 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4323 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4325 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4328 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4330 From David Mosberger-Tang <davidm@azstarnet.com>
4332 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4333 (alpha_insn_set): added definitions for VAX floating point
4334 instructions (Unix compilers don't generate these, but handcoded
4335 assembly might still use them).
4337 * alpha-dis.c (print_insn_alpha): added support for disassembling
4338 the miscellaneous instructions in the Alpha instruction set.
4340 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4342 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4343 no longer create sysdep.h, sed ppc-opc.c to work around a
4344 serious Metrowerks C bug.
4345 * mpw-make.in: Remove.
4346 * mpw-make.sed: New file, used by mpw-configure to edit
4347 Makefile.in into an MPW makefile.
4349 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4351 * Makefile.in (maintainer-clean): New synonym for realclean.
4353 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4355 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4356 which use '0', '1', and '2' instead. Specify the proper size for
4357 a pmove immediate operand. Correct the pmovefd patterns to be
4358 moves to a register, not from a register.
4359 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4361 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4363 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4364 %psr, %wim, %tbr as F_NOTV9.
4366 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4368 * Makefile.in (Makefile): Just rebuild Makefile when running
4370 (config.h, stamp-h): New targets.
4371 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4372 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4373 rebuilding config.h.
4374 * configure: Rebuild.
4376 * mips-opc.c: Change unaligned loads and stores with "t,A"
4377 operands to use "t,A(b)".
4379 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4381 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4383 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4385 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4386 until 3 instead of until 2.
4388 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4390 * Makefile.in (ALL_CFLAGS): Define.
4391 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4392 (MOSTLYCLEAN): Add config.log.
4393 (distclean): Don't remove config.log.
4394 * configure.in: Substitute HDEFINES.
4395 * configure: Rebuild.
4397 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4399 * sh-opc.h (sh_arg_type): Add F_FR0.
4400 (sh_table, case fmac): Add F_FR0 as first argument.
4402 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4404 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4406 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4408 * sparc-dis.c: Remove all references to NO_V9.
4410 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4412 * aclocal.m4: Just include ../bfd/aclocal.m4.
4413 * configure: Rebuild.
4415 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4417 * sparc-dis.c (X_DISP19): Define.
4418 (print_insn, case 'G'): Use it.
4419 (print_insn, case 'L'): Sign extend displacement.
4421 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4423 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4424 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4425 host_makefile_frag or frags.
4426 * aclocal.m4: New file.
4427 * configure: Rebuild.
4428 * Makefile.in (INSTALL): Set to @INSTALL@.
4429 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4430 (INSTALL_DATA): Set to @INSTALL_DATA@.
4432 (AR_FLAGS): Set to rc rather than qc.
4433 (CC): Define as @CC@.
4434 (CFLAGS): Set to @CFLAGS@.
4435 (@host_makefile_frag@): Remove.
4436 (config.status): Remove dependency upon @frags@.
4438 * configure.in: ../bfd/config.bfd now just sets shell variables.
4439 Use them rather than looking through target Makefile fragments.
4440 * configure: Rebuild.
4442 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4444 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4446 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4448 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4449 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4452 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4453 (lookup_{name,value}): New functions.
4454 (prefetch_table): New static local.
4455 (sparc_{encode,decode}_prefetch): New functions.
4456 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4458 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4460 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4463 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4465 * sh-dis.c: Correct comment on first line of file.
4467 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4469 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4471 * sparc-opc.c (asi, membar): New static locals.
4472 (sparc_{encode,decode}_{asi,membar}): New functions.
4473 (sparc_opcodes, membar insn): Fix.
4474 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4475 Support decoding of membar masks.
4478 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4480 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4482 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4484 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4485 and likewise for the other branches. Add bhs as an alias for bcc,
4486 and likewise for the size variants. Add dbhs as an alias for
4489 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4491 * sh-opc.h (FP sts instructions): Update to match reality.
4493 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4495 * m68k-dis.c: (fpcr_names): Add % before all register names.
4496 (reg_names): Likewise.
4497 (print_insn_arg): Don't explicitly print % before register names.
4498 Add % before register names in static array names. In case 'r',
4499 print data registers as `@(Dn)', not `Dn@'. When printing a
4500 memory address, don't print @# before it.
4501 (print_indexed): Change base_disp and outer_disp from int to
4502 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4503 syntax. Sign extend 8 byte displacement correctly.
4504 (print_base): Print using MIT syntax. Print zpc when appropriate.
4505 Change parameter disp from int to bfd_vma.
4507 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4510 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4512 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4513 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4514 * sh-opc.h (sh_arg_type): Add new operand types.
4515 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4517 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4519 * Makefile.in (distclean): Remove generated file config.h.
4521 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4523 * Makefile.in (distclean): Remove generated file config.h.
4525 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4527 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4529 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4531 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4532 rather than numopcodes. Use m68k_opcodes rather than removed
4533 opcode function. Don't check F_ALIAS.
4534 (print_insn_arg): Change first parameter to be const char *.
4535 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4536 (m68k-opc.o): New target.
4537 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4538 * configure: Rebuild.
4540 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4542 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4543 (opcode_bits, opcode_hash_table): New variables.
4544 (opcodes_initialized): Renamed from opcodes_sorted.
4545 (build_hash_table): New function.
4546 (is_delayed_branch): Use hash table.
4547 (print_insn): Renamed from print_insn_sparc, made static.
4548 Build and use hash table. If !sparc64, ignore sparc64 insns,
4549 and vice-versa if sparc64.
4550 (print_insn_sparc, print_insn_sparc64): New functions.
4551 (compare_opcodes): Move sparc64 opcodes to end.
4552 Print commutative insns with constant second.
4553 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4555 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4557 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4558 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4559 avoids printing a delay slot in a delay slot.
4560 * sh-opc.h (sh_table): Fully bracket last entry.
4562 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4564 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4566 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4568 * configure.in: Get host_makefile_frag from ${srcdir}.
4570 * configure.in: Autoconfiscated. Check for string[s].h. Create
4571 config.h from config.in. Don't set up sysdep.h link.
4572 * sysdep.h: New file.
4573 * configure, config.in: New files, generated from configure.in.
4574 * Makefile.in: Updated to be processed autoconf-style.
4575 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4576 (Makefile): Depend on config.status.
4577 (config.status): New rule.
4578 * configure.bat: Update Makefile substitutions.
4580 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4582 * mips-opc.c (L1): Define.
4583 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4584 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4587 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4589 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4590 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4591 have multiple add units but only a single logical unit.
4593 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4594 shifted by 18, without any insertion or extraction function.
4595 (insert_cr, extract_cr): Remove.
4597 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4599 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4602 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4604 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4605 * sh-opc.h: Add copyright.
4607 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4609 * Makefile.in (crunch-m68k): Delete extra target accidentally
4610 checked in a while ago.
4612 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4614 * sh-opc.h (sh_table): Add SH3 support.
4616 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4618 * sh-opc.h: Added bsrf and braf.
4620 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4622 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4623 bogus [ls]fm{ea,fd} patterns.
4625 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4626 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4627 initialize it from memory. Make function static.
4628 (print_insn_{big,little}_arm): New functions.
4629 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4630 the correct endianness.
4632 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4634 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4637 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4639 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4640 17th, so that it builds again using GCC as the compiler.
4642 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4644 * mips-dis.c (print_insn_little_mips): Cast return value from
4645 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4646 expects an unsigned long, and that might be fewer words of
4647 argument storage (e.g., if bfd_vma is long long on a 32-bit
4649 (print_insn_big_mips): Likewise with bfd_getb32 value.
4650 (_print_insn_mips): Now static.
4652 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4654 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4655 gcc memory hog problem with initializer is fixed.
4657 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4659 Merge in support for Mac MPW as a host.
4660 (Old change descriptions retained for informational value.)
4662 * mpw-config.in (archname): Compute from the config.
4663 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4665 * mpw-config.in (target_arch): Compute from canonical target.
4666 (m68k, mips, powerpc, sparc): Add architectures.
4667 * mpw-make.in (disassemble.c.o): Add.
4668 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4670 * mpw-config.in (BFD_MACHINES): Set to a default value.
4671 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4673 * mpw-make.in (CSEARCH): Add extra-include to search path.
4675 * mpw-config.in (varargs.h): Don't create.
4676 (sysdep.h): Create using forward-include.
4677 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4679 * mpw-config.in: New file, MPW version of configure.in.
4680 * mpw-make.in: New file, MPW version of Makefile.in.
4682 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4684 * alpha-dis.c (print_insn_alpha): Put empty statement after
4687 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4689 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4690 (low_sign_extend): Likewise.
4691 (get_field): Delete unused function.
4692 (set_field, deposit_14, deposit_21): Likewise.
4694 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4696 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4699 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4701 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4703 * alpha-opc.h (OSF_ASMCODE): define
4704 print pal-code names as defined in App C of the
4705 Alpha Architecture Reference Manual
4707 * alpha-dis.c: cleaned up output
4708 print stylized code forms as defined in App A.4.3 of the
4709 Alpha Architecture Reference Manual
4711 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4713 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4715 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4718 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4720 * m68k-dis.c (opcode): New function. Returns address of opcode
4721 table entry given index, even if the opcode table was split to
4722 work around gcc bugs.
4723 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4725 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4726 (reg_names): Now const.
4727 (print_insn_arg): Arrays cacheFieldName and names now const.
4728 (print_indexed): Array scales now const.
4730 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4732 * ppc-opc.c: Sort recently added instructions by minor opcode
4733 number within major opcode number.
4735 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4737 * hppa-dis.c: Include libhppa.h.
4739 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4741 * mips-opc.c: Change dli to use M_DLI, and add dla.
4743 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4745 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4747 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4749 * mips-opc.c: Add r4650 mul instruction.
4751 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4753 * mips-opc.c: Add uld and usd macros for unaligned double load and
4756 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4758 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4759 mfdcr, mtdcr, icbt, iccci.
4761 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4763 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4764 signed char fields to shorts, more portable.
4766 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4768 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4769 char fields as signed chars, since they may have negative values.
4771 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4773 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4774 (mycroft@netbsd.org).
4776 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4778 From "Logg, Ed" <elogg@ea.com>:
4779 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4780 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4783 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4785 * ppc-opc.c: Changes based on patch from David Edelsohn
4786 <edelsohn@mhpcc.edu>.
4787 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4790 (insert_tbr): New static function.
4791 (extract_tbr): New static function.
4792 (XFXFXM_MASK, XFXM): Define.
4793 (XSPRBAT_MASK, XSPRG_MASK): Define.
4794 (powerpc_opcodes): Add instructions to access special registers by
4795 name. Add mtcr and mftbu.
4797 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4799 * mips-opc.c (P3): Define.
4800 (mips_opcodes): Add mad and madu.
4802 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4804 * configure.in: Add W65 support.
4805 * disassemble.c: Likewise.
4806 * w65-opc.h, w65-dis.c: New files.
4808 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4810 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4813 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4815 * mips-opc.c: Add dli as a synonym for li.
4817 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4819 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4820 print something for reserved opcode values, even if it won't
4823 * mips-dis.c (_print_insn_mips): When initializing, shift right
4824 and mask, to avoid sign extension problems on the Alpha.
4826 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4829 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4831 * sh-opc.h (mov.l gbr): Get direction right.
4832 * sh-dis.c (print_insn_shx): New function.
4833 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4834 print opcodes with right byte order.
4836 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4838 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4839 to avoid conflicts with getopt.
4841 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4843 * hppa-dis.c (print_insn_hppa): Read the instruction using
4844 bfd_getb32, so that it works on a little endian or 64 bit host.
4845 Remove unused local variable op.
4847 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4849 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4850 addu does not work correctly if -mips3.
4852 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4854 * a29k-dis.c (print_special): Add special register names defined
4855 on 29030, 29040 and 29050.
4856 (print_insn): Handle new operand type 'I'.
4858 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4860 * Makefile.in (INSTALL): Use top level install.sh script.
4862 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4864 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4865 that it works on a little endian host.
4867 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4869 * configure.in: Use ${config_shell} when running config.bfd.
4871 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4873 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4875 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4877 * a29k-dis.c (print_insn): Print the opcode.
4879 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4881 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4883 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4885 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4887 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4889 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4890 which store a value into memory.
4892 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4894 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4895 * arm-dis.c, arm-opc.h: New files.
4897 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4899 * Makefile.in (ns32k-dis.o): Add dependency.
4900 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4901 string, not as array of chars.
4903 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4905 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4907 * sparc-opc.c: Added sparclite extended FP operations, and
4908 versions of v9 impdep* instructions permitting specification of
4911 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4913 * i960-dis.c (reg_names): Now const.
4914 (struct sparse_tabent): New type, copied from array type in mem
4916 (ctrl): Local static array ctrl_tab now const.
4917 (cobr): Local static array cobr_tab now const.
4918 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4919 static variable mem_tab no longer explicitly initialized. Changed
4920 mem_init to const array of struct sparse_tabent.
4921 (reg): Local static variable reg_tab no longer explicitly
4922 initialized. Changed reg_init to const array of struct
4924 (ea): Local static array scale_tab now const.
4926 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4929 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4931 * configure.bat: the disassember needs to be enabled for
4932 "objdump -d" to work in djgpp.
4934 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4936 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4937 (invalid_float): Enabled general version, doesn't require running
4938 on ns32k host. Changed to take char* argument, and test for
4939 explicitly specified sizes, instead of using sizeof() on host CPU
4941 (INVALID_FLOAT): Cast first argument.
4942 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4943 list_P032, list_M032): Now const.
4944 (optlist, list_search): Made appropriate arguments now point to
4946 (print_insn_arg): Changed static array of one-character-string
4947 pointers into a static const array of characters; fixed sprintf
4948 statement accordingly.
4950 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4952 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4953 from distribution. A ns32k-dis.c from a previous distribution has
4954 been brought up to date and supports the new interface.
4956 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4958 * configure.in: add bfd_ns32k_arch target support.
4960 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4961 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4963 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4965 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4968 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4970 * h8300-dis.c, mips-dis.c: Don't use true and false.
4972 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4974 * configure.in: Change --with-targets to --enable-targets.
4976 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4978 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4979 opcodes to the first instruction with that opcode, to speed
4980 disassembly of large files. From ralphc@pyramid.com (Ralph
4983 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4985 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4987 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4989 * configure.bat: update to latest makefile.in
4991 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4993 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4994 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4995 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4996 slot insn is in a delay slot.
4997 * z8k-opc.h: (resflg): Fix patterns.
4998 * h8500-opc.h Fix CR insn patterns.
5000 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5002 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5003 "cmpl" before POWER versions, so that gas -many uses them.
5005 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5007 * disassemble.c: New file.
5008 * Makefile.in (OFILES): Add disassemble.o.
5009 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5010 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5011 binutils/configure.in.
5013 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5014 opcode being examined.
5016 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5018 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5019 (insert_ral, insert_ram, insert_ras): New functions.
5020 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5021 RAS for store with update.
5023 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5025 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5026 (edelsohn@npac.syr.edu).
5028 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5033 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5035 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5037 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5039 * ppc-opc.c (powerpc_operands): The signedp field has been
5040 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5041 instead. Add new operand SISIGNOPT.
5042 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5043 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5044 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5047 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5049 * i386-dis.c (struct private): Renamed to dis_private. `private'
5050 is a reserved word for dynix cc.
5052 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5054 * configure.in: Change error message to refer to bfd/config.bfd
5055 rather than bfd/configure.in.
5057 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5059 * ppc-opc.c: Define POWER2 as short alias flag.
5060 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5063 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5065 * i960-dis.c (print_insn_i960): Don't read a second word for
5066 opcodes 0, 1, 2 and 3.
5068 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5072 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5074 * m68881-ext.c: Removed; no longer used.
5075 * Makefile.in: Changed accordingly.
5077 * m68k-dis.c (ext_format_68881): Don't declare.
5078 (print_insn_m68k): If an instruction uses place 'i', it uses at
5079 least four fixed bytes.
5080 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5081 extended float, convert to double using floatformat_to_double, not
5082 ieee_extended_to_double, and fetch the data before converting it.
5084 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5086 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5087 davidj@ICSI.Berkeley.EDU (David Johnson).
5089 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5091 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5092 PowerPC uses bdnz[l][a].
5094 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5096 * dis-buf.c, i386-dis.c: Include sysdep.h.
5098 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5100 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5102 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5103 by Motorola PowerPC 601 with PPC_OPCODE_601.
5104 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5105 Disassemble Motorola PowerPC 601 instructions as well as normal
5106 PowerPC instructions.
5108 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5110 * i960-dis.c (reg, mem): Just use a static array instead of
5113 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5115 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5116 condition name index if this is for a negated condition.
5118 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5119 Floating point format for 'H' operand is backwards from normal
5120 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5121 operands (fmpyadd and fmpysub), handle bizarre register
5122 translation correctly for single precision format.
5124 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5125 or 'I' operands if the next format specifier is 'M' (fcmp
5126 condition completer).
5128 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5130 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5131 single number giving a bitmask for the MB and ME fields of an M
5132 form instruction. Change NB to accept 32, and turn it into 0;
5133 also turn 0 into 32 when disassembling. Seperated SH from NB.
5134 (insert_mbe, extract_mbe): New functions.
5135 (insert_nb, extract_nb): New functions.
5136 (SC_MASK): Mask out SA and LK bits.
5137 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5138 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5139 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5140 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5141 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5142 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5143 (powerpc_macros): Define table of macro definitions.
5144 (powerpc_num_macros): Define.
5146 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5147 if PPC_OPERAND_NEXT is set.
5149 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5151 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5152 char. Retrieve contents using bfd_getl32 instead of shifting.
5154 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5156 * ppc-opc.c: New file. Opcode table for PowerPC, including
5157 opcodes for POWER (RS/6000).
5158 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5159 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5160 (CFILES): Add ppc-dis.c.
5161 (ppc-dis.o, ppc-opc.o): New targets.
5162 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5164 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5166 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5167 No space before 'u', 'f', or 'N'.
5169 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5171 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5172 farther than we should.
5174 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5176 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5178 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5180 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5182 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5183 needs it, to prevent reading past the end of a section.
5185 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5187 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5188 Removed t,A case for la; always use t,A(b) case.
5190 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5192 From Ted Lemen <mellon@pepper.ncd.com>
5193 * mips-dis.c (print_insn_arg): Handle 'k'.
5194 * mips-opc.c: Make cache use k, not t.
5196 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5198 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5199 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5200 FLOAT_FORMAT_CODE to put out floating point register names.
5202 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5204 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5206 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5208 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5210 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5212 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5213 larger than 32. Moved dsxx32 variants first for disassembler.
5215 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5217 * z8kgen.c, z8k-opc.h: Add full lda information.
5219 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5221 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5222 movb instructions. Any necessary space will be emitted by
5223 the code to handle nullification completers.
5225 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5227 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5229 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5231 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5232 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5234 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5236 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5238 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5240 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5241 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5243 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5245 * m88k-dis.c (m88kdis): comment change. Remove space after
5247 (printop): handle new arg types DEC and XREG for m88110.
5249 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5251 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5252 type for absolute branch addresses. Delete special
5253 "ble" and "be" code in 'W' operand code.
5255 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5257 * mips-opc.c: Set hazard information correctly for branch
5258 likely instructions.
5260 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5262 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5263 info->fprintf_func for printing and info->print_address_func for
5266 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5268 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5270 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5272 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5273 Corrected second case of "b" for disassembler.
5275 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5277 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5278 to BFD swapping routines to correspond to BFD name changes.
5280 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5282 * mips-opc.c: Change div machine instruction to be z,s,t rather
5283 than s,t. Change div macro to be d,v,t rather than d,s,t.
5284 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5285 rem and remu which generates only the corresponding div
5286 instruction. This is for compatibility with the MIPS assembler,
5287 which only generates the simple machine instruction when an
5288 explicit destination of $0 is used.
5289 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5291 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5293 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5294 WR_31 hazard for bal, bgezal, bltzal.
5296 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5298 * hppa-dis.c (print_insn_hppa): Use print function
5299 from within the disassemble_info, not fprintf_filtered.
5301 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5303 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5304 Law, law@cs.utah.edu.)
5306 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5308 * mips-opc.c ("absu"): Removed.
5311 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5313 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5314 Changed hazard information to distinguish between memory load
5315 delays and coprocessor load delays.
5317 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5319 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5321 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5323 * configure.in: Don't pass cpu to config.bfd.
5325 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5327 * m88k-dis.c (m88kdis): Make class unsigned.
5329 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5331 * alpha-dis.c (print_insn_alpha): One branch format case was
5332 missing the instruction name.
5334 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5336 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5337 Add the arch-specific auxiliary files.
5338 (OFILES): Remove the arch-specific auxiliary files
5339 and use BFD_MACHINES instead of DIS_LIBS.
5340 * configure.in: Set BFD_MACHINES based on --with-targets option.
5342 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5344 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5347 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5349 * sparc-opc.c: Change CONST to const to deal with gcc
5350 -Dconst=__const -traditional.
5352 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5354 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5355 coprocessor instructions out of #if 0, and made them use new
5358 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5360 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5362 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5364 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5365 instruction, for use by the disassembler.
5367 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5368 hand-coded sign extensions that depended on 32-bit host ints.
5369 FIXME, we still depend on big-endian host bitfield ordering.
5370 (sparc_print_insn): Set the insn_info_valid field, and the
5371 other fields that describe the instruction being printed.
5373 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5375 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5376 `jmp' instead of just one of them.
5378 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5380 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5381 (fput_fp_reg_r): Renamed from fput_reg_r.
5382 (fput_fp_reg): New function.
5383 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5385 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5387 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5389 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5391 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5393 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5394 don't output a space.
5396 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5398 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5400 * mips-opc.c: New file, containing opcode table from
5401 ../include/opcode/mips.h.
5402 * Makefile.in: Add it.
5404 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5406 * m88k-dis.c: New file, moved in from gdb and changed to use the
5407 new dis-asm.h disassembler interface.
5408 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5409 (m88k-dis.o): New target.
5411 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5413 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5414 argument string const char * to correspond to opcode/mips.h.
5416 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5418 * mips-dis.c: Updated to account for name changes in new version
5420 * Makefile.in: Added header file dependencies.
5422 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5424 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5426 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5428 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5429 extend, rather than shifts.
5431 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5433 * Makefile.in: Undo 15 June change.
5435 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5437 * m68k-dis.c (print_insn_arg): Change return value to byte count
5439 * m68k-dis.c: Re-write to detect invalid operands before
5440 printing anything, so we can handle this the same way we
5441 handle invalid opcodes.
5443 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5445 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5447 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5449 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5452 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5454 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5456 * configure.in: Do make sysdep.h link.
5457 * Makefile.in: Search ../include. Don't search ../bfd.
5459 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5461 Changes from Jeff Law, law@cs.utah.edu:
5462 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5463 Do not print a space before the completers specified by
5466 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5468 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5469 defined, since gdb has been fixed.
5471 Changes from Jeff Law, law@cs.utah.edu:
5472 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5473 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5474 be a *disassemble_info, not a *FILE.
5475 * hppa-dis.c: Support 'd', '!', and 'a'.
5476 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5477 * hppa-dis.c: Delete cases which are no longer needed.
5479 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5481 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5483 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5485 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5488 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5490 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5491 * configure.in: No longer need to configure to get sysdep.h.
5493 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5495 * Patches from Jeffrey Law <law@cs.utah.edu>.
5496 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5497 templates for 1.1 FP computational instructions.
5499 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5501 * h8500-dis.c (print_insn_h8500): Address argument is type
5503 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5506 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5507 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5509 * sparc-dis.c (compare_opcodes): Move static declaration to
5512 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5514 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5515 instruction, remove unimp hack from 'l' argument.
5517 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5519 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5522 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5524 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5525 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5528 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5530 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5531 arrays of string pointers to 2-d arrays of chars, to save
5534 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5536 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5537 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5539 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5541 * hppa-dis.c: New file from Utah, adapted to new disassembler
5543 * Makefile.in: Include it.
5545 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5547 * sh-dis.c, sh-opc.h: New files.
5549 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5551 * alpha-dis.c, alpha-opc.h: New files.
5553 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5555 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5558 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5560 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5562 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5564 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5567 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5569 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5570 and double percent signs a few places.
5572 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5574 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5575 Use info->print_address_func not print_address.
5577 * dis-buf.c (generic_print_address): New function.
5579 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5581 * Makefile.in: Add sparc-dis.c.
5582 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5584 Add `add' instruction to the set that get checked
5585 for a preceding `sethi' in order to print an absolute address.
5586 * (print_insn): Disassembly prefers real instructions.
5587 (is_delayed_branch): Speed up.
5588 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5589 Still missing some float ops, and needs testing.
5590 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5591 F_ALIAS. Use printf, not fprintf, when not passing a file
5593 (compare_opcodes): Check that identical instructions have
5594 identical opcodes, complain otherwise.
5597 * Include reg_names.
5599 Use dis-asm.h/read_memory_func interface.
5601 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5603 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5604 deliberately return non-zero to setjmp from longjmp. Otherwise
5605 this code fails to compile.
5607 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5609 * m68k-dis.c: Fix prototype for fetch_arg().
5611 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5613 * dis-buf.c: New file, for new read_memory_func interface.
5614 Makefile.in (OFILES): Include it.
5615 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5616 Use new read_memory_func interface.
5618 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5620 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5621 * h8500-opc.h: Fix couple of opcodes.
5623 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5625 * Makefile.in: add dvi & installcheck targets
5627 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5629 * Makefile.in: Update for h8500-dis.c.
5631 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5633 * h8500-dis.c, h8500-opc.h: New files
5635 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5637 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5638 ../include/dis-asm.h.
5639 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5640 and ../gdb/m68k-pinsn.c).
5641 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5642 and ../gdb/i386-pinsn.c).
5643 * m68881-ext.c: New file. Moved definition of
5644 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5645 * Makefile.in: Adjust for new files.
5646 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5647 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5648 can be dis-assembled.
5650 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5652 * mips-dis.c (print_insn_arg): Now returns void.
5654 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5656 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5657 files that use the macros.
5659 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5661 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5662 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5663 (CFILES): Added mips-dis.c.
5665 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5667 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5668 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5670 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5672 * Makefile.in: Improve *clean rules.
5673 * configure.in: Allow a default host.
5675 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5677 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5678 files include other sysdep files
5680 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5682 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5684 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5686 * configure.in: For host support, use ../bfd/configure.host
5687 so it stays in sync with the ../bfd/hosts database.
5689 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5691 * configure.in: use cpu-vendor-os triple instead of nested cases
5693 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5695 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5696 *always* the wrong one.
5698 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5700 * z8kgen.c: added copyright info
5702 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5704 * z8k-dis.c (unparse_instr): prettier tabs
5705 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5707 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5709 * configure.in: Add ncr* configuration.
5710 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5711 picayune ANSI compilers happy.
5713 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5715 * configure.in (i386): Make i386 and i486 synonymous for now.
5716 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5718 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5720 * Makefile.in (install): Fix typo.
5722 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5724 * Makefile.in (make): Remove obsolete crud.
5725 (sparc-opc.o): Avoid Sun Make VPATH bug.
5727 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5729 * Makefile.in: since there are no SUBDIRS, remove rule and
5730 references of subdir_do.
5732 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5734 * Makefile.in (install): Get the library name right here too.
5735 Don't install bfd.h, since it's unrelated to this library. No
5736 subdirs to recurse into, either.
5737 (CFILES): The source file has a .c suffix, not .o.
5739 * sparc-opc.c: New file, moved from BFD.
5740 * Makefile.in (OFILES): Build it.
5742 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5744 * z8k-dis.c: fixed forward refferences of some declarations.
5746 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5748 * Makefile.in: get the name of the library right
5750 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5752 * z8k-dis.c: knows how to disassemble z8k stuff
5753 * z8k-opc.h: new file full of z8000 opcodes
5757 version-control: never