1 Mon Aug 30 18:56:14 1999 Richard Henderson <rth@cygnus.com>
3 * alpha-opc.c (fetch, fetch_m, ecb, wh64): RA must be R31.
5 1999-08-04 Doug Evans <devans@casey.cygnus.com>
7 * fr30-asm.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
8 * m32r-asm.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
9 * m32r-opinst.c: Rebuild.
11 Sat Aug 28 00:27:24 1999 Jerry Quinn <jquinn@nortelnetworks.com>
13 * hppa-dis.c (print_insn_hppa): Replace 'f' by 'v'. Prefix float
16 * hppa-dis.c (print_insn_hppa): Add args q, %, !, and |.
18 * hppa-dis.c (MASK_10, read_write_names, add_compl_names,
19 extract_10U_store): New.
20 (print_insn_hppa): Add new completers.
22 * hppa-dis.c (signed_unsigned_names,mix_half_names,
23 saturation_names): New.
24 (print_insn_hppa): Add completer codes 'a', 'ch', 'cH', 'cS', and 'c*'.
26 * hppa-dis.c (print_insn_hppa): Place completers behind prefix 'c'.
28 * hppa-dis.c (print_insn_hppa): Add cases for '.', '~'. '$'. and '!'
30 * hppa-dis.c (print_insn_hppa): Look at next arg instead of bits
31 to decide to print a space.
33 1999-08-21 Alan Modra <alan@spri.levels.unisa.edu.au>
35 * i386-dis.c: Add AMD athlon instruction support.
37 1999-08-10 Ian Lance Taylor <ian@zembu.com>
39 From Wally Iimura <iimura@microunity.com>:
40 * dis-buf.c (buffer_read_memory): Rewrite expression to avoid
41 overflow at end of address space.
42 (generic_print_address): Use sprintf_vma.
44 1999-08-08 Ian Lance Taylor <ian@zembu.com>
46 * Makefile.am: Rename .dep* files to DEP*. Change DEP variable to
47 MKDEP. Rebuild dependencies.
48 * Makefile.in: Rebuild.
50 Fri Aug 6 09:46:35 1999 Jerry Quinn <jquinn@nortelnetworks.com>
52 * hppa-dis.c (compare_cond_64_names, cmpib_cond_64_names,
53 add_cond_64_names, wide_add_cond_names, logical_cond_64_names,
54 unit_cond_64_names, shift_cond_64_names, bb_cond_64_names): New.
55 (print_insn_hppa): Add 64 bit condition completers.
57 Thu Aug 5 16:59:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
59 * hppa-dis.c (print_insn_hppa): Change condition args to use
62 Wed Jul 28 04:33:58 1999 Jerry Quinn <jquinn@nortelnetworks.com>
64 * hppa-dis.c (print_insn_hppa): Remove unnecessary test in 'E'
67 1999-07-21 Ian Lance Taylor <ian@zembu.com>
70 * configure.bat: Remove; obsolete.
72 1999-07-11 Ian Lance Taylor <ian@zembu.com>
74 * dis-buf.c: Add ATTRIBUTE_UNUSED as appropriate.
75 (generic_strcat_address): Add cast to avoid warning.
76 * i386-dis.c: Initialize all structure fields to avoid warnings.
77 Add ATTRIBUTE_UNUSED as appropriate.
79 1999-07-08 Jakub Jelinek <jj@ultra.linux.cz>
81 * sparc-dis.c (print_insn_sparc): Differentiate between
82 addition and oring when guessing symbol for comment.
84 1999-07-05 Nick Clifton <nickc@cygnus.com>
86 * arm-dis.c (print_insn_arm): Display hex equivalent of rotated
89 1999-06-23 Alan Modra <alan@spri.levels.unisa.edu.au>
91 * i386-dis.c: Mention intel mode specials in macro char comment.
93 1999-06-21 Ian Lance Taylor <ian@zembu.com>
95 * alpha-dis.c: Don't include <stdlib.h>.
96 * arm-dis.c: Include "sysdep.h".
97 * tic30-dis.c: Don't include <stdlib.h> or <string.h>. Include
99 * Makefile.am: Rebuild dependencies.
100 * Makefile.in: Rebuild.
102 1999-06-16 Nick Clifton <nickc@cygnus.com>
104 * arm-dis.c (print_insn_arm): Add detection of IMB and IMBRange
107 1999-06-14 Nick Clifton <nickc@cygnus.com> & Drew Mosley <dmoseley@cygnus.com>
109 * arm-dis.c (arm_regnames): Turn into a pointer to a register
111 (arm_regnames_standard): New variable: Array of ARM register
112 names according to ARM instruction set nomenclature.
113 (arm_regnames_apcs): New variable: Array of ARM register names
114 according to ARM Procedure Call Standard.
115 (arm_regnames_raw): New variable: Array of ARM register names
116 using just 'r' and the register number.
117 (arm_toggle_regnames): New function: Toggle the chosen register set
119 (parse_disassembler_options): New function: Parse any target
120 disassembler command line options.
121 (print_insn_big_arm): Call parse_disassembler_options if any
123 (print_insn_little_arm): Call parse_disassembler_options if any
126 1999-06-13 Ian Lance Taylor <ian@zembu.com>
128 * i386-dis.c (FWAIT_OPCODE): Define.
129 (used_prefixes): New static variable.
130 (fetch_data): Don't print an error message if we have already
131 fetched some bytes successfully.
132 (ckprefix): Clear used_prefixes. Use FWAIT_OPCODE, not 0x9b.
133 (prefix_name): New static function.
134 (print_insn_i386): If setjmp fails, indicating a data error, but
135 we have managed to fetch some bytes, print the first one as a
136 prefix or a .byte pseudo-op. If fwait is followed by a non
137 floating point instruction, print the first prefix. Set
138 used_prefixes when prefixes are used. If any prefixes were not
139 used after disassembling the instruction, print the first prefix
140 instead of printing the instruction.
141 (putop): Set used_prefixes when prefixes are used.
142 (append_seg, OP_E, OP_G, OP_REG, OP_I, OP_sI, OP_J): Likewise.
143 (OP_DIR, OP_SIMD_Suffix): Likewise.
145 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
147 * sparc-opc.c: Fix up set, setsw, setuw operand kinds.
148 Support signx %reg, clruw %reg.
150 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
152 * sparc-opc.c: Add aliases Solaris as supports.
154 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
156 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
157 * Makefile.in: Regenerated.
159 1999-06-03 Philip Blundell <philb@gnu.org>
161 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
162 when target is PC-relative.
164 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
166 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
169 * m68k-dis.c (fetch_arg): Add places `n', `o'.
171 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
172 Add mcf5206e to appropriate instructions.
173 Add alias for MAC, MSAC.
175 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
178 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
179 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
181 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
183 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
185 * i386-dis.c (Ed): Define.
186 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
188 (OP_rm): Rename to OP_Rd.
191 (putop): Add const to template and p.
192 (print_insn_x86): Delete.
193 (print_insn_i386): Merge old function print_insn_x86. Add const
195 (struct dis386): Add const to name.
196 (dis386_att, dis386_intel): Add const.
197 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
198 (names32, names16, names8, names_seg, index16): Add const.
199 (grps, prefix_user_table, float_reg): Add const.
200 (float_mem_att, float_mem_intel): Add const.
201 (oappend): Add const to s.
202 (OP_REG): Add const to s.
203 (ptr_reg): Add const to s.
204 (dofloat): Add const to dp.
205 (OP_C): Don't skip modrm, it's now done in OP_Rd.
208 (OP_Rd): Check for valid mod. Call Op_E to print.
209 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
210 (OP_MS): Check for valid mod. Call Op_EM to print.
211 (OP_3DNowSuffix): Set obufp and use oappend rather than
212 strcat. Call BadOp() for errors.
213 (OP_SIMD_Suffix): Likewise.
214 (BadOp): New function.
216 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
218 * i386-dis.c (dis386_intel): Remove macro chars, except for
219 jEcxz. Change cWtR and cRtd to cW and cR.
220 (dis386_twobyte_intel): Remove macro chars here too.
221 (putop): Handle R and W macros for intel mode.
223 * i386-dis.c (SIMD_Fixup): New function.
224 (dis386_twobyte_att): Use it on movlps and movhps, and change
225 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
226 (dis386_twobyte_intel): Same here.
228 * i386-dis.c (Av): Remove.
232 (OP_SIMD_Suffix): New function.
233 (OP_DIR): Remove dead code.
234 (eAX_reg..eDI_reg): Renumber.
235 (onebyte_has_modrm): Table numbering comments.
236 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
237 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
238 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
239 and handle SIMD cmp insns in OP_SIMD_Suffix.
240 (info->bytes_per_line): Bump from 5 to 6.
242 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
243 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
245 PIII SIMD support from Doug Ledford <dledford@redhat.com>
246 * i386-dis.c (XM, EX, None): Define.
247 (OP_XMM, OP_EX, OP_None): New functions.
248 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
249 (GRP14): Rename to GRPAMD.
250 (GRP*): Add USE_GROUPS flag.
252 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
253 (twobyte_has_modrm): Add SIMD entries.
254 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
255 (grps): Add SIMD insns.
256 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
257 oappend repz if uses_f3_prefix. Add code to handle new groups for
260 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
261 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
262 operand from Av to Jv.
264 1999-05-07 Nick Clifton <nickc@cygnus.com>
266 * mcore-dis.c (print_insn_mcore): Use .short to display
267 unidentified instructions, not .word.
269 1999-04-26 Tom Tromey <tromey@cygnus.com>
271 * aclocal.m4, configure: Updated for new version of libtool.
273 1999-04-14 Doug Evans <devans@casey.cygnus.com>
275 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
276 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
278 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
280 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
283 1999-04-10 Doug Evans <devans@casey.cygnus.com>
285 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
286 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
288 1999-04-06 Ian Lance Taylor <ian@zembu.com>
290 * opintl.h (LC_MESSAGES): Never define.
292 1999-04-04 Ian Lance Taylor <ian@zembu.com>
294 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
295 (separator_char, scale_char): Likewise.
296 (print_insn_x86): Likewise.
297 (print_insn_i386): Likewise. Add declaration.
299 1999-03-26 Doug Evans <devans@casey.cygnus.com>
301 * fr30-dis.c: Rebuild.
302 * m32r-dis.c: Rebuild.
304 1999-03-23 Ian Lance Taylor <ian@zembu.com>
306 * m68k-opc.c: Change compare instructions to use "@s" rather than
307 ";s" when used with an immediate operand.
309 1999-03-22 Doug Evans <devans@casey.cygnus.com>
311 * cgen-opc.c (cgen_set_cpu): Delete.
312 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
313 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
315 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
317 * po/opcodes.pot: Rebuild.
319 1999-03-16 Martin Hunt <hunt@cygnus.com>
321 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
323 1999-03-11 Doug Evans <devans@casey.cygnus.com>
325 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
326 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
327 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
328 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
329 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
330 * m32r-opinst.c: Rebuild.
332 1999-02-25 Doug Evans <devans@casey.cygnus.com>
334 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
335 (cgen_hw_lookup_by_num): Rewrite.
336 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
337 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
338 * m32r-opinst.c: Rebuild.
340 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
342 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
343 (insert_jhint): Fix insertion mask.
344 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
346 1999-02-10 Doug Evans <devans@casey.cygnus.com>
348 * Makefile.in: Rebuild.
350 1999-02-09 Doug Evans <devans@casey.cygnus.com>
352 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
353 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
354 * Makefile.am: Remove references to them.
355 (HFILES): Add fr30-desc.h,m32r-desc.h.
356 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
358 (ALL_MACHINES): Update.
359 * configure.in: Redo handling of cgen_files.
360 (bfd_i960_arch): Delete i960c-*.lo files.
361 * configure: Regenerate.
362 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
363 (hash_insn_array): Rewrite.
364 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
365 (hash_insn_array): Rewrite.
366 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
367 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
368 (cgen_lookup_get_insn_operands): Ditto.
369 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
370 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
371 * po/POTFILES.in: Rebuild.
372 * po/opcodes.pot: Rebuild.
374 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
376 * Makefile.am: Rebuild dependencies.
377 (HFILES): Add fr30-opc.h.
378 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
379 * Makefile.in: Rebuild.
381 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
382 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
384 * acconfig.h: Remove.
385 * configure: Rebuild with current autoconf/automake.
386 * aclocal.m4: Likewise.
387 * config.in: Likewise.
388 * Makefile.in: Likewise.
390 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
392 * m68k-opc.c: Correct move (not movew) to status word on 5200.
394 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
396 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
397 * i386-dis.c (x_mode): Define.
401 (dis386_twobyte): Remove.
402 (dis386_twobyte_att): New.
403 (dis386_twobyte_intel): New.
404 (print_insn_x86): Use new arrays.
406 (float_mem_intel): New.
407 (float_mem_att): New.
408 (dofloat): Use new float_mem arrays.
409 (print_insn_i386_att): New.
410 (print_insn_i386_intel): New.
411 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
412 (putop): Handle intel syntax.
413 (OP_indirE): Handle intel syntax.
414 (OP_E): Handle intel syntax.
415 (OP_I): Handle intel syntax.
416 (OP_sI): Handle intel syntax.
417 (OP_OFF): Handle intel syntax.
421 1999-01-27 Doug Evans <devans@casey.cygnus.com>
423 * fr30-opc.h,fr30-opc.c: Rebuild.
424 * i960c-opc.h,i960c-opc.c: Rebuild.
425 * m32r-opc.c: Rebuild.
427 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
429 * hppa-dis.c: revert HP merge changes until HP gives us
432 1999-01-19 Nick Clifton <nickc@cygnus.com>
434 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
435 offsets as well as symbloic address.
437 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
439 * hppa-dis.c: fix comments and some indentation.
441 1999-01-12 Doug Evans <devans@casey.cygnus.com>
443 * fr30-opc.c,i960c-opc.c: Regenerate.
445 1999-01-11 Doug Evans <devans@casey.cygnus.com>
447 * fr30-opc.c: Regenerate.
449 1999-01-06 Doug Evans <devans@casey.cygnus.com>
451 * m32r-dis.c: Regenerate.
453 1999-01-05 Doug Evans <devans@casey.cygnus.com>
455 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
456 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
457 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
459 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
461 * configure.in: Require autoconf 2.12.1 or higher.
463 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
465 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
467 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
469 * fr30-opc.c: Regenerated.
471 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
473 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
475 1998-12-15 Dave Brolley <brolley@cygnus.com>
477 * fr30-opc.c,fr30-opc.h: Regenerated.
479 1998-12-14 Dave Brolley <brolley@cygnus.com>
481 * fr30-opc.c,fr30-opc.h: Regenerated.
483 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
485 * fr30-opc.c,fr30-opc.h: Regenerated.
487 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
489 * m32r-opc.c: Regenerate.
491 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
493 * dis-buf.c (generic_strcat_address): reformat to GNU coding
494 conventions. change sprintf call to an sprintf_vma call.
496 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
498 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
500 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
502 The following changes were made by
503 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
504 David Taylor <taylor@texas.cygnus.com>, and
505 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
506 merge in changes by HP; HP did not create ChangeLog entries.
508 * dis-buf.c (generic_strcat_address): new function.
510 * hppa-dis.c: Changes to improve hppa disassembly.
511 Changed formatting in : reg_names, fp_reg_names,control_reg,
512 New variables : sign_extension_names, deposit_names, conversion_names
513 float_test_names, compare_cond_names_double, add_cond_names_double,
514 logical_cond_names_double, unit_cond_names_double,
515 branch_push_pop_names, saturation_names, shift_names, mix_names,
516 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
517 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
518 (fput_const): renamed as fput_hex_const
520 - use the macros fputs_filtered and
521 fput_decimal_const whenever possible; calls to sign_extend require
522 2 params -- add a missing second param of 0.
523 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
524 architecture version number of current machine. HP folks are
525 trying to handle situation where the target program was compiled
526 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
528 - added new cases : 'g', 'B', 'm'
529 - added cases specifically for PA 2.0
530 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
531 - calls to fput_const become calls to fput_hex_const
533 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
535 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
536 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
537 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
538 * Makefile.in: Rebuilt.
539 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
541 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
542 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
544 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
546 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
548 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
550 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
552 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
553 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
555 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
557 * fr30-opc.c: Regenerate.
559 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
561 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
563 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
565 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
567 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
569 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
571 1998-11-30 Doug Evans <devans@casey.cygnus.com>
573 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
574 CGEN_INSN_BASE_VALUE.
575 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
576 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
578 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
580 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
582 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
584 * fr30-asm.c,fr30-dis.c: Regenerated.
586 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
588 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
590 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
592 * fr30-opc.c: Regenerated.
594 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
596 * fr30-opc.c: Regenerated.
597 * fr30-opc.h: Regenerated.
598 * fr30-dis.c: Regenerated.
599 * fr30-asm.c: Regenerated.
601 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
603 * mips-opc.c (sync.p,sync.l): Swap insn values.
605 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
607 * fr30-opc.c: Regenerate.
609 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
611 * fr30-opc.c: Regenerated.
612 * fr30-opc.h: Regenerated.
614 1998-11-18 Doug Evans <devans@casey.cygnus.com>
616 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
617 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
619 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
621 * fr30-opc.c: Regenerated.
623 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
625 * fr30-opc.c: Regenerated.
626 * fr30-opc.h: Regenerated.
627 * fr30-dis.c: Regenerated.
628 * fr30-asm.c: Regenerated.
630 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
632 * po/opcodes.pot: Regenerated.
633 * fr30-opc.c: Regenerated.
634 * fr30-opc.h: Regenerated.
635 * fr30-dis.c: Regenerated.
636 * fr30-asm.c: Regenerated.
638 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
640 * disassemble.c (disassembler): Add support for FR30 target.
642 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
644 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
645 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
647 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
649 * po/opcodes.pot: Regenerate.
650 * po/POTFILES.in: Regenerate.
651 * fr30-opc.c: Regenerate.
652 * fr30-opc.h: Regenerate.
654 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
656 * m32r-asm.c: Regenerate.
658 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
660 * configure.in: Added case for bfd_fr30_arch.
661 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
662 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
663 (CLEANFILES): Added stamp-fr30.
665 * fr30-asm.c: New file.
666 * fr30-dis.c: New file.
667 * fr30-opc.c: New file.
668 * fr30-opc.h: New file.
669 * po/POTFILES.in: Regenerated
670 * po/opcodes.pot: Regenerated
672 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
674 * configure.in: detect cygwin* instead of cygwin32*
675 * configure: regenerate
677 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
679 * mips-opc.c (IS_M): Added.
681 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
683 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
685 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
687 * m32r-opc.h,m32r-opc.c: Regenerate.
689 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
691 * i386-dis.c (OP_3DNowSuffix): New static function.
694 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
695 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
696 (insn_codep): New static variable.
697 (print_insn_x86): Init insn_codep after prefixes.
698 (grps): Add GRP14 entries for prefetch, prefetchw.
701 From Jeff B Epler <jepler@usgs.gov>
702 * i386-dis.c (Suffix3DNow): New table.
704 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
706 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
708 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
710 * d10v-dis.c (print_operand): If num is nonzero, then
711 add OPERAND_ACC1, not OPERAND_ACC0.
713 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
715 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
718 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
720 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
723 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
725 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
727 1998-09-09 Michael Meissner <meissner@cygnus.com>
729 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
732 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
734 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
736 (print_insn_little_arm): Detect Thumb symbols in elf object
739 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
741 * alpha-dis.c (print_insn_alpha): Use the machine type to
742 decide which PALcode set to include.
744 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
746 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
748 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
750 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
751 MSUB and MSUBS instructions.
753 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
755 * ppc-opc.c (powerpc_operands): Omit parens around additions in
758 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
760 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
761 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
762 +, -, and d for ColdFire.
764 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
765 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
766 (extract_mbe): Likewise.
768 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
770 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
772 * m10300-opc.c: First cut at UDF instructions.
774 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
776 * m32r-opc.c: Regenerate (remove semantic descriptions).
778 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
780 * arm-dis.c (print_insn_big_arm): Fix indentation.
781 (print_insn_little_arm): Likewise.
783 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
785 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
787 (print_insn_little_arm): Likewise.
789 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
791 Move all global state data into opcode table struct, and treat
792 opcode table as something that is "opened/closed".
793 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
794 (cgen_asm_init): Delete.
795 (cgen_set_parse_operand_fn): New function.
796 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
797 (cgen_dis_init): Delete.
798 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
799 (cgen_current_{opcode_table_mach,endian}): Delete.
800 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
802 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
804 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
807 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
809 * m10300-opc.c: Add entries for "no_match_operands" field in
812 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
814 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
816 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
818 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
820 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
822 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
824 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
826 (OP_J): Remove unnecessary subtraction when 16-bit displacement
827 will be masked later.
829 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
831 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
833 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
835 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
837 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
839 * m10300-dis.c: Only recognize instructions from the currently
841 * m10300-opc.c: Add field indicating the particular variant of
842 the mn10300 each instruction is available on.
844 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
846 * configure.in: For bfd_vax_arch, build vax-dis.lo.
847 * Makefile.am: Rebuild dependencies.
848 (CFILES): Add vax-dis.c.
849 (ALL_MACHINES): Add vax-dis.lo.
850 * aclocal.m4: Rebuild with current libtool.
851 * configure, Makefile.in: Rebuild.
853 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
855 * vax-dis.c: New file, from work by Pauline Middelink
856 <middelin@polyware.iaf.nl>.
857 * disassemble.c (ARCH_vax): Define if ARCH_all.
858 (disassembler): Add case for ARCH_vax.
859 * makefile.vms: Support compilation on vms/vax.
861 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
863 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
864 related to sign extension and the size of ints.
866 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
868 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
869 instructions. Support (sp) addressing mode by expanding it into
872 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
874 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
876 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
878 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
880 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
882 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
885 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
887 * mips-dis.c (print_insn_little_mips): Previously, instruction
888 printing references the symbol table to determine whether the
889 instruction resides in a block regular instructions or mips16
890 instructions. However, when the disassembler gets used in other
891 environments where the symbol table is not present, we no longer
892 rely in the symbol table, rather, use the low bit of the
893 instructions address to guess. There should be no change for usage
894 of the disassembler in host based programs, gdb, objdump.
895 (print_insn_big_mips): ditto.
896 (print_insn_mips): ditto
898 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
900 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
902 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
904 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
906 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
908 * i386-dis.c (index16): Add '%' to register names. Use ','
911 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
913 * i386-dis.c: Don't print opcode suffix when we can figure out the
914 size (and gas can!) by register operands, or from the default
916 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
918 (dis386, dis386_twobyte, grps): Use new suffix macros.
919 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
920 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
921 order of cmps operands to agree with Intel docs. Correct operand
922 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
923 agree with Intel docs.
924 (print_insn_x86): Print orphan fwait before other prefixes.
925 Return correct byte count for orphan fwait with prefixes. Don't
926 print `bound' operands in reverse order.
927 (ckprefix): Stop accumulating prefixes if we get fwait.
928 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
930 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
932 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
933 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
935 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
937 Fix problems when bfd_vma is wider than long.
938 * i386-dis.c: Make op_address and start_pc unsigned.
939 (set_op): Make parameter unsigned.
940 (print_insn_x86): Cast to bfd_vma when passing a value to
942 * ns32k-dis.c (CORE_ADDR): Don't define.
943 (print_insn_ns32k): Change type of addr to bfd_vma. Use
944 bfd_scan_vma to read back address.
945 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
947 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
948 (NEXTULONG): New definition.
949 (print_insn_m68k): Avoid overflow when computing third argument of
951 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
952 Use disp instead of val to store offset values.
953 (print_indexed): Use base_disp instead of word to store base
954 displacement, to avoid overflow.
955 * m10300-dis.c (disassemble): Cast value to long when computing
956 pc-relative address, to get correct sign extension.
958 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
960 * m32r-opc.c: Regenerate.
962 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
964 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
965 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
967 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
969 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
971 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
973 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
975 (OP_DSreg): Rename from OP_DSSI.
976 (OP_ESreg): Rename from OP_ESDI.
977 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
979 (append_seg): Rename from append_prefix.
980 (ptr_reg): New function.
981 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
983 (PREFIX_ADDR): Rename from PREFIX_ADR.
984 (float_reg): Add non-broken opcodes for people who don't want
987 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
989 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
992 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
994 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
996 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
998 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
999 0; produce error message for shifts of size 32 (or 64 for 64-bit
1000 shifts), because the hardware doesn't support them.
1002 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
1004 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
1005 LONG_2, LONG_2b formats to use this new operand.
1007 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
1009 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
1011 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
1013 * sparc-dis.c (print_insn_sparc): big endian instruction / little
1014 endian data support.
1016 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
1018 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
1019 and SHORT_B3b formats to use Rb instead of Ra.
1021 Add FLAG_MUL16 to MUL2XH opcode.
1023 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
1024 to existing 1.1.1 parallelisation prohibition procedure.
1026 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
1028 * m32r-asm.c,m32r-dis.c: Regenerate.
1030 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
1032 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
1033 with a shift count of 0.
1035 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
1037 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
1038 (cgen_hw_lookup_by_num): New function.
1040 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
1042 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
1044 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
1046 * sparc-dis.c (print_insn_sparc): Always fetch instructions
1047 as big-endian on SPARClite.
1049 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
1051 * d30v-opc.c (pre_defined_register): Remove alias for r0.
1053 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
1055 * po/Make-in (install-info): New target.
1057 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
1059 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
1060 * configure: Rebuild.
1062 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
1064 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
1065 variety of ISA2 instructions to set bottom ten bits of trap code.
1067 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
1069 * Makefile.am (config.status): Add explicit target so that
1070 config.status depends upon bfd/configure.in.
1071 * Makefile.in: Rebuild.
1073 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1075 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
1076 instructions to set bottom ten bits of break code.
1077 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
1078 for above optional argument.
1080 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
1082 * makefile.vms: Run dec c with /nodebug.
1084 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
1086 * Makefile.in: Rebuilt.
1087 * Makefile.am: Regenerated dependencies with mkdep.
1089 * opintl.h (_): Define as dgettext.
1091 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1093 * cgen-asm.c: Internationalised.
1094 * m32r-asm.c: Internationalised.
1095 * m32r-dis.c: Internationalised.
1096 * m32r-opc.c: Internationalised.
1098 * aclocal.m4: Regenerated.
1099 * configure: Regenerated.
1100 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1101 * Makefile.in: Rebuild.
1102 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1103 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1105 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1107 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1109 * aclocal.m4, configure: Rebuild with current tools.
1111 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1113 * opintl.h: New file - contains internationalisation macros used
1114 by source files in this directory.
1115 * po/: New subdirectory - contains internationalisation files.
1116 * po/Make-in: New file - Makefile constructor.
1117 * po/POTFILES.in: New file - list of files in opcodes directory
1118 that should be scan for internationalisation macros.
1119 * po/opcodes.pot: New file - list of internationisation strings
1120 found in files mentioned in po/POTFILES.in.
1121 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1122 entry. Add intl directory to include paths.
1123 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1124 HAVE_STRCPY, HAVE_LC_MESSAGES
1125 * configure.in: Add rule to build Makefile in po subdirectory.
1126 * Makefile.in: Rebuilt.
1127 * aclocal.m4: Rebuilt.
1128 * config.in: Rebuilt.
1129 * configure: Rebuilt.
1130 * alpha-opc.c: Internationalised.
1131 * arc-dis.c: Internationalised.
1132 * arc-opc.c: Internationalised.
1133 * arm-dis.c: Internationalised.
1134 * cgen-asm.c: Internationalised.
1135 * d30v-dis.c: Internationalised.
1136 * dis-buf.c: Internationalised.
1137 * h8300-dis.c: Internationalised.
1138 * h8500-dis.c: Internationalised.
1139 * i386-dis.c: Internationalised.
1140 * m10200-dis.c: Internationalised.
1141 * m10300-dis.c: Internationalised.
1142 * m68k-dis.c: Internationalised.
1143 * m88k-dis.c: Internationalised.
1144 * mips-dis.c: Internationalised.
1145 * ns32k-dis.c: Internationalised.
1146 * opintl.h: Internationalised.
1147 * ppc-opc.c: Internationalised.
1148 * sparc-dis.c: Internationalised.
1149 * v850-dis.c: Internationalised.
1150 * v850-opc.c: Internationalised.
1152 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1154 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1155 (asm_hash_table_entries): New variable.
1156 (cgen_asm_init): Free asm_hash_table_entries.
1157 (hash_insn_array,hash_insn_list): New functions.
1158 (build_asm_hash_table): Use them. Hash macro insns as well.
1159 (cgen_asm_lookup_insn): Update.
1160 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1161 (dis_hash_table_entries): New variable.
1162 (cgen_dis_init): Free dis_hash_table_entries.
1163 (hash_insn_array,hash_insn_list): New functions.
1164 (build_dis_hash_table): Use them. Hash macro insns as well.
1165 (cgen_dis_lookup_insn): Update.
1166 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1167 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1168 (cgen_macro_insn_count): New function.
1169 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1171 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1173 * i386-dis.c (OP_DSSI): Print segment override.
1175 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1177 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1180 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1182 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1183 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1184 * configure.in: Define and substitute WIN32LDFLAGS and
1186 * aclocal.m4: Rebuild with new libtool.
1187 * configure, Makefile.in: Rebuild.
1189 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1191 * m32r-opc.c: Regenerate.
1193 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1195 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1196 before trying to copy it.
1197 * Makefile.in: Rebuild.
1199 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1201 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1203 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1205 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1206 from an arbitrary valid buffer instead of fetching them on demand
1208 (invalid_float): use bit_extract_simple() instead of bit_extract().
1210 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1212 From H.J. Lu <hjl@gnu.org>:
1213 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1216 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1218 * Branched binutils 2.9.
1220 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1222 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1223 disassembling last 4 bytes of a section.
1225 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1227 Fix some gcc -Wall warnings:
1228 * arc-dis.c (print_insn): Add casts to avoid warnings.
1229 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1230 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1231 * m10200-dis.c (disassemble): Likewise.
1232 * m10300-dis.c (disassemble): Likewise.
1233 * ns32k-dis.c (print_insn_ns32k): Likewise.
1234 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1235 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1236 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1237 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1238 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1239 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1240 * tic80-dis.c (print_one_instruction): Likewise.
1241 * w65-dis.c (print_operand): Likewise.
1242 * z8k-dis.c (fetch_data): Likewise.
1243 * a29k-dis.c: Add return type for find_byte_func_type.
1244 * arc-opc.c: Include <stdio.h>. Remove declarations of
1245 insert_multshift and extract_multshift.
1246 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1248 (extract_value): Fully parenthesize expression.
1249 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1250 * h8500-opc.h (h8500_table): Fully bracket initializer.
1251 * w65-opc.h (optable): Likewise.
1252 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1253 * i386-dis.c (OP_E): Initialize local variables.
1254 * m10200-dis.c (print_insn_mn10200): Likewise.
1255 * mips-dis.c (print_insn_mips16): Likewise.
1256 * sh-dis.c (print_insn_shx): Likewise.
1257 * v850-dis.c (print_insn_v850): Likewise.
1258 * ns32k-dis.c (print_insn_arg): Declare.
1259 (get_displacement, invalid_float): Declare.
1260 (list_search, sign_extend, flip_bytes): Declare return type.
1261 (get_displacement): Likewise.
1262 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1264 (print_insn_ns32k): Make i unsigned.
1265 (invalid_float): Make static. Declare type of val.
1266 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1267 on each for iteration.
1268 * tic30-dis.c (get_indirect_operand): Likewise.
1269 * z8k-dis.c (print_insn_z8001): Declare return type.
1270 (print_insn_z8002): Likewise.
1271 (unparse_instr): Fix sprintf format strings.
1273 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1275 * mips-opc.c: Add "sync.l" and "sync.p".
1277 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1279 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1280 default m68k variant to recognize.
1282 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1283 (ctrl, cobr, mem, ea): Likewise.
1284 (print_addr): Likewise. Remove cast.
1285 (ea): Cast argument of print_addr to bfd_vma.
1287 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1289 (cgen_parse_unsigned_integer): Likewise.
1290 (cgen_parse_address): Likewise.
1292 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1294 * i960-dis.c (ctrl): Add full braces to structure initialization.
1295 (cobr, mem, reg): Likewise.
1296 (ea): Correct parenthesization in expression.
1298 * cgen-asm.c: Include <ctype.h>.
1299 (build_asm_hash_table): Remove unused local variable i.
1300 (cgen_parse_keyword): Add casts to avoid warnings.
1302 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1303 symbol. Fix indentation.
1304 (print_insn_little_arm): Likewise.
1306 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1308 * configure.in: Use AM_DISABLE_SHARED.
1309 * aclocal.m4, configure: Rebuild with libtool 1.2.
1311 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1313 These patches are courtesy of Jonathan Walton and Tony Thompson
1314 (athompso@cambridge.arm.com).
1316 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1319 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1320 both the offset and the label closest to the destination.
1322 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1324 * m32r-opc.h: Regenerate.
1326 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1328 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1330 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1332 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1333 assume that info->symbols is non-empty.
1335 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1337 * alpha-opc.c (cvtqs) There is no such thing.
1338 (cvttq): Missing most of the /*d variants.
1340 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1342 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1343 delayed branches or jumps.
1345 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1347 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1349 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1350 * tic30-dis.c (print_branch): Likewise.
1352 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1354 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1355 saved_symbol code as it is no longer needed.
1357 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1359 * cgen-asm.c: Include symcat.h.
1360 * cgen-dis.c,cgen-opc.c: Ditto.
1361 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1363 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1365 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1367 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1369 * m32r-opc.[ch]: Regenerate.
1371 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1373 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1374 arguments. Don't perform validation here.
1375 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1377 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1379 * m32r-opc.c: Regenerate.
1381 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1383 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1384 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1386 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1388 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1390 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1392 * configure.in: Get the version number from BFD.
1393 * configure: Rebuild.
1395 From H.J. Lu <hjl@gnu.org>:
1396 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1397 * Makefile.in: Rebuild.
1399 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1401 * m32r-opc.c: Regenerate.
1402 * m32r-opc.h: Regenerate.
1404 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1406 * m32r-opc.c: Regenerate.
1408 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1410 Fix rac to accept only a0:
1411 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1412 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1413 Introduce OPERAND_GPR.
1414 * d10v-dis.c (print_operand): Likewise.
1416 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1418 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1419 (cgen_hw_lookup): Make result const.
1420 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1422 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1424 * configure, aclocal.m4: Rebuild with new libtool.
1426 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1428 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1429 instructions use a PC relative branch, not absolute.
1431 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1433 * configure.in: Set libtool_enable_shared rather than
1434 libtool_shared. Remove diversion hack.
1435 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1437 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1439 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1440 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1442 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1444 * tic30-dis.c: New file.
1445 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1446 * configure.in: Handle bfd_tic30_arch.
1447 * Makefile.am: Rebuild dependencies.
1448 (CFILES): Add tic30-dis.c
1449 (ALL_MACHINES): Add tic30-dis.lo.
1450 * configure, Makefile.in: Rebuild.
1452 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1454 * m32r-opc.h (HAVE_CPU_M32R): Define.
1456 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1458 * v850-opc.c (insertion routines): If both alignment and size is
1459 wrong then report this.
1461 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1463 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1464 Only recognize instructions for the current target_processor.
1466 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1468 * d10v-dis.c (PC_MASK): Correct value.
1469 (print_operand): If there's a reloc, don't calculate the
1470 address because they could be in different sections.
1472 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1474 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1475 instruction after the 4650's "mul" instruction; nobody's using the
1476 4010 these days. If object files someday indicate which processor
1477 variant they're intended for, we can do a better job at this.
1479 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1481 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1482 table provided entry size. Use CGEN_INSN_MNEMONIC.
1483 (cgen_parse_keyword): Rewrite.
1484 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1485 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1486 * cgen-opc.c: Clean up pass over `struct foo' usage.
1487 (cgen_keyword_lookup_value): Handle "" entry.
1488 (cgen_keyword_add): Likewise.
1490 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1492 * mips-opc.c: Add FP_D to s.d instruction flags.
1494 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1496 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1498 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1500 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1501 PC relative offset forms before the 15 bit forms. An assembler command
1502 line option now chooses the default.
1504 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1506 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1507 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1509 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1511 * configure: Only build libopcodes shared if --enable-shared's value
1512 was `yes', or was set to `*opcodes*'.
1513 * aclocal.m4: Likewise.
1514 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1515 original source of this bit of code. It's not clear what the best fix
1518 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1520 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1521 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1522 offset forms before the 15 bit forms, to default to the long forms.
1524 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1526 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1528 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1530 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1531 symbol if none is present.
1532 (print_insn_big_arm): Prevent examination of stored symbol if
1535 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1537 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1539 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1541 * disassemble.c: Remove disasm_symaddr() function.
1543 * arm-dis.c: Use info->symbol instead of info->flags to determine
1544 if disassmbly should be in Thumb or Arm mode.
1546 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1548 * arm-dis.c: Add support for disassembling Thumb opcodes.
1549 (print_insn_thumb): New function.
1551 * disassemble.c (disasm_symaddr): New function.
1553 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1554 (thumb_opcodes): Table of Thumb opcodes.
1556 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1558 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1560 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1561 and 'v' as operand types.
1563 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1565 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1566 <olivier.carmona@di.epfl.ch>.
1567 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1568 which has a two word opcode with a one word argument.
1570 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1572 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1573 unsigned, not signed.
1574 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1576 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1578 * d10v-dis.c (print_operand):
1579 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1581 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1583 * d10v-opc.c (OPERAND_FLAG): Split into:
1584 (OPERAND_FFLAG, OPERAND_CFLAG) .
1588 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1590 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1591 field for all INSN_MACRO's.
1592 * mips16-opc.c: same
1594 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1596 * mips-opc.c (sync,cache): These are 3900 insns.
1598 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1600 sh-opc.h (sh_table): Remove ftst/nan.
1602 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1604 * mips-opc.c (ffc, ffs): Fix mask.
1606 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1608 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1611 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1613 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1614 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1616 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1618 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1619 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1621 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1623 * v850-dis.c (disassemble): Replace // with /* ... */
1625 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1627 * sparc-opc.c: Add wr & rd for v9a asr's.
1628 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1629 (v9a_asr_reg_names): New variable.
1630 Patch from David Miller <davem@vger.rutgers.edu>.
1632 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1634 * sparc-opc.c (v9notv9a): New insn type.
1635 (IMPDEP): Move to the end to not conflict with edge8 et al.
1636 Patch from David Miller <davem@vger.rutgers.edu>.
1638 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1640 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1642 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1644 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1646 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1648 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1649 of disassemble_info structure to determine if an overlay address
1650 has a matching symbol in low memory.
1652 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1653 new symbol_at_address_func field in disassemble_info structure.
1655 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1657 * v850-opc.c (extract_d22): Use signed arithmatic.
1659 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1661 * mips-opc.c: Three op mult is not an ISA insn.
1663 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1665 * mips-opc.c: Fix formatting.
1667 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1669 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1670 than assuming that char is signed. Explicitly sign extend 16 bit
1671 values, rather than assuming that short is 16 bits.
1672 (OP_sI, OP_J, OP_DIR): Likewise.
1674 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1676 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1679 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1681 * v850-opc.c: Fix typo in comment.
1683 * v850-dis.c (disassemble): Add test of processor type when
1684 determining opcodes.
1686 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1688 * configure.in: Use a diversion to set enable_shared before the
1689 arguments are parsed.
1690 * configure: Rebuild.
1692 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1694 * m68k-opc.c (TBL1): Use ! rather than `.
1695 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1697 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1699 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1701 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1703 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1706 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1707 * aclocal.m4: Rebuild with new libtool.
1708 * configure: Rebuild.
1710 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1712 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1714 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1716 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1718 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1720 * v850-opc.c (v850_opcodes): Further rearrangements.
1722 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1724 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1726 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1728 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1731 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1733 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1735 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1737 * v850-opc.c: Initialise processors field of v850_opcode structure.
1739 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1741 Merge changes from Martin Hunt:
1743 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1745 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1746 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1747 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1749 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1751 * d30v-dis.c (print_insn): First operand of d*i (delayed
1752 branch) instructions is relative.
1754 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1755 (d30v_operand_table): Add IMM6S3 type.
1756 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1758 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1759 and cmp instructions.
1761 * d30v-opc.c: Correct entries for repeat*, and sat*.
1762 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1763 types. Correct several formats.
1765 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1767 * d30v-opc.c (pre_defined_registers): Change control registers.
1769 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1770 SHORT_C2. Manual was incorrect.
1772 * d30v-dis.c (lookup_opcode): Return value now indicates
1773 if an opcode has a short and a long form. Used for deciding
1774 to append a ".s" or ".l".
1775 (print_insn): Append a ".s" to an instruction if it is
1776 the short form and ".l" if it is a long form. Do not append
1777 anything if the instruction has only one possible size.
1779 * d30v-opc.c: Change mulx2h to require an even register.
1780 New form: SHORT_A2; a SHORT_A form that needs an even
1781 register as the first operand.
1783 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1784 instruction was not being disassembled if there were an odd
1785 number of instructions.
1787 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1789 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1791 * v850-dis.c (disassemble): Improved display of register lists.
1793 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1795 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1796 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1797 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1798 fandnot1s, fandnot2s.
1800 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1802 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1804 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1806 * cgen-asm.c (cgen_parse_address): New argument resultp.
1807 All callers updated.
1808 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1810 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1812 * mn10200-dis.c (disassemble): PC relative instructions are
1813 relative to the next instruction, not the current instruction.
1815 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1817 * v850-dis.c (disassemble): Only signed extend values that are not
1818 returned by extract functions.
1819 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1821 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1823 * v850-opc.c: Update comments. Remove use of
1824 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1826 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1828 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1830 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1832 * configure: Rebuilt with latest devo autoconf for NT support.
1834 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1836 * v850-dis.c (disassemble): Use curly brace syntax for register
1839 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1840 where r0 is being used as a destination register.
1842 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1844 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1846 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1848 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1850 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1852 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1853 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1856 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1858 * configure (cgen_files): Add support for v850e target.
1859 * configure.in (cgen_files): Add support for v850e target.
1861 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1863 * configure (cgen_files): Add support for v850ea target.
1864 * configure.in (cgen_files): Add support for v850ea target.
1866 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1868 * configure.in (bfd_arc_arch): Add.
1869 * configure: Rebuild.
1870 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1871 * Makefile.in: Rebuild.
1872 * arc-dis.c, arc-opc.c: New files.
1873 * disassemble.c (ARCH_all): Define ARCH_arc.
1874 (disassembler): Add ARC support.
1876 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1878 * v850-dis.c (disassemble): Add support for v850EA instructions.
1880 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1881 (v850_opcodes): Add v850EA instructions.
1883 * v850-dis.c (disassemble): Add support for v850E instructions.
1885 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1886 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1887 insert_spe, extract_spe): New Functions.
1888 (v850_opcodes): Add v850E instructions.
1890 * v850-opc.c: Reorganised and re-layed out to improve readability
1893 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1895 * configure: Rebuild with autoconf 2.12.1.
1897 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1899 * aclocal.m4, configure: Rebuild with new automake patches.
1901 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1903 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1904 * acinclude.m4: Just include acinclude.m4 from BFD.
1905 * aclocal.m4, configure: Rebuild.
1907 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1909 * Makefile.am: New file, based on old Makefile.in.
1910 * acconfig.h: New file.
1911 * acinclude.m4: New file.
1912 * stamp-h.in: New file.
1913 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1914 Removed shared library handling; now handled by libtool. Replace
1915 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1916 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1917 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1918 handling in AC_OUTPUT.
1919 * dep-in.sed: Change .o to .lo.
1920 * Makefile.in: Now built with automake.
1921 * aclocal.m4: Now built with aclocal.
1922 * config.in, configure: Rebuild.
1924 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1926 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1928 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1930 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1932 * sparc-dis.c (sorted_opcodes): New static local.
1933 (struct opcode_hash): `opcode' is pointer to const element.
1934 (build_hash): First arg is now table of sorted pointers.
1935 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1936 (compare_opcodes): Update.
1938 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1940 * cgen-opc.c: #include <ctype.h>.
1941 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1942 Handle case insensitive hashing.
1943 (hash_keyword_value): Change type of `value' to unsigned int.
1945 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1947 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1948 precision FP, mark it as such. Likewise for double precision
1949 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1952 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1954 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1956 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1957 nesting depth when all the macros are expanded.
1959 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1961 * sparc-opc.c: The fcmp v9a instructions take an integer register
1962 as a destination, not a floating point register. From Christian
1963 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1965 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1967 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1968 syntax. From Roman Hodek
1969 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1971 * i386-dis.c (twobyte_has_modrm): Fix pand.
1973 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1975 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1977 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1979 * arm-dis.c: Add prototypes for arm_decode_shift and
1982 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1984 * mips-opc.c: Add r3900 insns.
1986 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1988 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1989 print delay slot instructions on the same line. When using a PC
1990 relative load, add a comment with the value being loaded if it can
1993 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1995 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1996 to pushS/popS for segment regs and byte constant so that
1997 pushw/popw printed when in 16 bit data mode.
1999 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2000 print cbtw, cwtd in 16 bit data mode.
2001 * i386-dis.c (putop): extra case W to support above.
2003 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2004 address size prefix in 16 bit address mode.
2006 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2008 * sh-dis.c: Reindent. Rename local variable fprintf to
2011 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2013 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2015 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2017 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2019 * mips16-opc.c (mip16_opcodes): same.
2021 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2023 * m68k-opc.c (moveb): Change $d to %d.
2025 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2027 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2028 (twobyte_has_modrm): Likewise.
2030 (OP_MMX, OP_EM, OP_MS): New static functions.
2032 * i386-dis.c: Revert patch of April 4. The output now matches
2035 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2037 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2040 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2042 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2044 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2046 * Makefile.in (install): Depend upon installdirs.
2047 (installdirs): New target.
2049 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2051 From Thomas Graichen <graichen@rzpd.de>:
2052 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2053 * configure: Rebuild.
2055 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2057 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2058 Delete string{,s}.h support.
2060 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2062 * cgen-asm.c (cgen_parse_operand_fn): New global.
2063 (cgen_parse_{{,un}signed_integer,address}): Update call to
2064 cgen_parse_operand_fn.
2065 (cgen_init_parse_operand): New function.
2066 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2067 from cgen_asm_init_parse.
2068 (m32r_cgen_assemble_insn): New operand `errmsg'.
2069 Delete call to as_bad, return error message to caller.
2070 (m32r_cgen_asm_hash_keywords): #if 0 out.
2072 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2074 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2076 [case 'J']: Fix typo in register name.
2078 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2080 * configure.in: Substitute SHLIB_LIBS.
2081 * configure: Rebuild.
2082 * Makefile.in (SHLIB_LIBS): New variable.
2083 ($(SHLIB)): Use $(SHLIB_LIBS).
2085 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2087 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2089 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2091 * disassemble.c (disassembler): Handle m32r.
2093 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2095 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2096 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2097 * Makefile.in (CFILES): Add them.
2098 (ALL_MACHINES): Add them.
2099 (dependencies): Regenerate.
2100 * configure.in (cgen_files): New variable.
2101 (bfd_m32r_arch): Add entry.
2102 * configure: Regenerate.
2104 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2106 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2107 * configure: Rebuild.
2109 * Makefile.in: Rebuild dependencies.
2111 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2113 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2116 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2118 * Branched binutils 2.8.
2120 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2122 * m10200-dis.c: Rename from mn10200-dis.c.
2123 * m10200-opc.c: Rename from mn10200-opc.c.
2124 * m10300-dis.c: Rename from mn10300-dis.c
2125 * m10300-opc.c: Rename from mn10300-opc.c.
2126 * Makefile.in: Update accordingly.
2128 * mips16-opc.c: Add mul and dmul macros.
2130 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2132 * makefile.vms: Update CFLAGS, add clean target.
2134 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2136 * mips-opc.c: Add "wait". From Ralf Baechle
2137 <ralf@gnu.ai.mit.edu>.
2139 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2140 * configure, config.in: Rebuild.
2141 * sysdep.h: Include <stdlib.h> if it exists.
2142 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2144 * Makefile.in: Rebuild dependencies.
2146 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2148 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2149 Andrew Bray <andy@madhouse.demon.co.uk>.
2151 * mips-opc.c: Add cast when setting mips_opcodes.
2153 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2155 * v850-dis.c (disassemble): Fix sign extension problem.
2156 * v850-opc.c (extract_d*): Fix sign extension problems to make
2157 disassembly calculate branch offsets correctly.
2159 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2161 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2163 * mips-opc.c: Add dctr and dctw.
2165 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2167 * d30v-dis.c (print_insn): Change the way signed constants
2170 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2172 * Makefile.in (BFD_H): New variable.
2173 (HFILES): New variable.
2174 (CFILES): Add all C files.
2175 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2176 Delete old dependencies, and build new ones.
2177 * dep-in.sed: New file.
2179 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2181 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2183 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2185 * mn10200-opc.c: Change "trap" to "syscall".
2186 * mn10300-opc.c: Add new "syscall" instruction.
2188 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2190 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2191 mulul insns on the coldfire.
2193 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2195 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2196 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2197 (print_insn_little_arm): Likewise.
2199 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2201 Based on patches from H.J. Lu <hjl@lucon.org>:
2202 * i386-dis.c (fetch_data): Add prototype.
2203 * m68k-dis.c (fetch_data): Add prototype.
2204 (dummy_print_address): Add prototype. Make static.
2205 * ppc-opc.c (valid_bo): Add prototype.
2206 * sparc-dis.c (build_hash_table): Add prototype.
2207 (is_delayed_branch, compute_arch_mask): Add prototypes.
2208 (print_insn_sparc): Make several local variables const.
2209 (compare_opcodes): Change arguments to const PTR. Add prototype.
2210 * sparc-opc.c (arg): Change name field to be const.
2211 (lookup_name, lookup_value): Add prototypes. Change table and
2212 name parameters to be const.
2213 (sparc_encode_asi): Change name parameter to be const.
2214 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2215 (sparc_encode_sparclet_cpreg): Likewise.
2216 (sparc_decode_asi): Change return type to be const.
2217 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2218 (sparc_decode_sparclet_cpreg): Likewise.
2220 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2222 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2223 Solaris doesn't like the combined options, and the -f is
2225 (stamp-tshlink, install): Likewise.
2227 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2229 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2232 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2234 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2236 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2238 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2241 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2243 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2245 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2247 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2249 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2251 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2253 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2255 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2256 floatformat_to_double to make portable.
2257 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2260 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2262 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2263 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2265 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2267 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2268 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2270 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2272 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2273 (OFF_SL_BR_SCALED): ... to this, and added the flag
2274 TIC80_OPERAND_BASEREL to the flags word.
2275 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2278 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2280 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2281 Change mips_opcodes from const array to a pointer,
2282 and change bfd_mips_num_opcodes from const int to int,
2283 so that we can increase the size of the mips opcodes table
2286 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2288 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2289 store BITNUM values in the table in one's complement form
2290 to match behavior when assembler is given a raw numeric
2291 value for a BITNUM operand.
2292 * tic80-dis.c (print_operand_bitnum): Ditto.
2294 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2296 * d30v-opc.c: Removed references to FLAG_X.
2298 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2300 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2302 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2304 * Makefile.in: Added d30v object files.
2305 * configure: (bfd_d30v_arch) Rebuilt.
2306 * configure.in: (bfd_d30v_arch) Added new case.
2307 * d30v-dis.c: New file.
2308 * d30v-opc.c: New file.
2309 * disassemble.c (disassembler) Add entry for d30v.
2311 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2313 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2314 representations for the floating point BITNUM values.
2316 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2318 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2319 in the table in one's complement form, as they appear in the
2321 (tic80_symbol_to_value): Use macros to access predefined
2323 (tic80_value_to_symbol): Ditto.
2324 (tic80_next_predefined_symbol): New function.
2325 * tic80-dis.c (print_operand_bitnum): Remove code that did
2326 one's complement for BITNUM values.
2328 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2330 * makefile.vms: Remove 8 bit characters. Update to latest
2333 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2335 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2337 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2339 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2340 (IMM24_PCREL): Likewise.
2342 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2344 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2345 address for an extended PC relative instruction that is not a
2348 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2350 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2353 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2355 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2356 (tic80_opcodes): Sort entries so that long immediate forms
2357 come after short immediate forms, making it easier for
2358 assembler to select the right one for a given operand.
2360 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2362 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2364 (print_insn_mips16): Likewise.
2366 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2368 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2369 a symbol class that restricts translation to just that
2370 class (general register, condition code, etc).
2372 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2374 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2375 and REG_DEST_E for register operands that have to be
2376 an even numbered register. Add REG_FPA for operands that
2377 are one of the floating point accumulator registers.
2378 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2379 (tic80_opcodes): Change entries that need even numbered
2380 register operands to use the new operand table entries.
2381 Add "or" entries that are identical to "or.tt" entries.
2383 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2385 * mips16-opc.c: Add new cases of exit instruction for
2387 * mips-dis.c (print_mips16_insn_arg): Display floating point
2388 registers in operands of exit instruction. Print `$' before
2389 register names in operands of entry and exit instructions.
2391 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2393 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2394 pairs for all predefined symbols recognized by the assembler.
2395 Also used by the disassembling routines.
2396 (tic80_symbol_to_value): New function.
2397 (tic80_value_to_symbol): New function.
2398 * tic80-dis.c (print_operand_control_register,
2399 print_operand_condition_code, print_operand_bitnum):
2400 Remove private tables and use tic80_value_to_symbol function.
2402 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2404 * d10v-dis.c (print_operand): Change address printing
2405 to correctly handle PC wrapping. Fixes PR11490.
2407 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2409 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2412 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2414 * mips-dis.c (print_insn_mips16): Set insn_info information.
2415 (print_mips16_insn_arg): Likewise.
2417 * mips-dis.c (print_insn_mips16): Better handling of an extend
2418 opcode followed by an instruction which can not be extended.
2420 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2422 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2423 coldfire moveb instruction to not allow an address register as
2424 destination. Although the documentation does not indicate that
2425 this is invalid, experiments uncovered unexpected behavior.
2426 Added a comment explaining the situation. Thanks to Andreas
2427 Schwab for pointing this out to me.
2429 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2431 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2432 entries are presorted so that entries with the same mnemonic are
2433 adjacent to each other in the table. Sort the entries for each
2434 instruction so that this is true.
2436 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2438 * m68k-dis.c: Include <libiberty.h>.
2439 (print_insn_m68k): Sort the opcode table on the most significant
2440 nibble of the opcode.
2442 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2444 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2445 "vsub", "vst", "xnor", and "xor" instructions.
2446 (V_a1): Renamed from V_a, msb of accumulator reg number.
2447 (V_a0): Add macro, lsb of accumulator reg number.
2449 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2451 * tic80-dis.c (print_insn_tic80): Broke excessively long
2452 function up into several smaller ones and arranged for
2453 the instruction printing function to be callable recursively
2454 to print vector instructions that have both a load and a
2455 math instruction packed into a single opcode.
2456 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2457 to explain why it comes after the other vector opcodes.
2459 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2461 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2462 move insns to handle immediate operands.
2464 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2466 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2467 fix operand mask in the "moveml" entries for the coldfire.
2469 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2471 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2472 New macros for building vector instruction opcodes.
2473 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2474 FMT_LI, which were unused. The field is now a flags field.
2475 Remove some opcodes that are possible, but illegal, such
2476 as long immediate instructions with doubles for immediate
2477 values. Add "vadd" and "vld" instructions.
2479 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2481 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2482 the order more logical. Move the shift alias instructions ("rotl",
2483 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2484 interspersed with the regular sr.x and sl.x instructions. Add
2485 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2486 "sub", "subu", "swcr", and "trap".
2488 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2490 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2491 (OFF_SL_PC): Renamed from OFF_SL.
2492 (OFF_SS_BR): New operand type for base relative operand.
2493 (OFF_SL_BR): New operand type for base relative operand.
2494 (REG_BASE): New operand type for base register operand.
2495 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2496 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2497 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2499 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2500 10 char field, padded with spaces on rhs, rather than a string
2501 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2502 than old TIC80_OPERAND_RELATIVE. Add support for new
2503 TIC80_OPERAND_BASEREL flag bit.
2505 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2507 * tic80-dis.c (print_insn_tic80): Print floating point operands
2509 * tic80-opc.c (SPFI): Add single precision floating point
2510 immediate operand type.
2511 (ROTATE): Add rotate operand type for shifts.
2512 (ENDMASK): Add for shifts.
2513 (n): Macro for the 'n' bit.
2514 (i): Macro for the 'i' bit.
2515 (PD): Macro for the 'PD' field.
2516 (P2): Macro for the 'P2' field.
2517 (P1): Macro for the 'P1' field.
2518 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2521 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2523 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2524 adding in current address for pc-relative operands.
2526 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2528 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2529 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2530 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2531 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2532 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2533 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2534 (REG_SCALED, LSI_SCALED): New operand types.
2535 (E): New macro for 'E' bit at bit 27.
2536 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2537 opcodes, including the various size flavors (b,h,w,d) for
2538 the direct load and store instructions.
2540 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2542 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2544 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2545 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2546 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2547 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2548 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2549 masks with "MASK_* & ~M_*" to get the M bit reset.
2550 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2552 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2554 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2555 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2556 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2558 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2559 CC, SICR, and LICR table entries.
2560 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2561 "bcnd", and "brcr" opcodes.
2563 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2565 * ppc-opc.c (powerpc_operands): Make comment match the
2566 actual fields (no shift field).
2567 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2568 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2569 partial implementation, work in progress.
2570 * tic80-opc.c (tic80_operands): Begin construction operands table.
2571 (tic80_opcodes): Continue populating opcodes table and start
2572 filling in the operand indices.
2573 (tic80_num_opcodes): Add this.
2575 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2577 * m68k-opc.c: Add #B case for moveq.
2579 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2581 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2582 before they are used.
2584 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2586 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2587 for "breakpoint" instruction.
2589 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2591 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2592 (dep): Use ALL_CFLAGS rather than CFLAGS.
2594 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2596 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2599 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2601 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2602 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2604 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2606 * mips16-opc.c: Add "abs".
2608 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2610 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2611 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2612 (disassembler): Add bfd_arch_tic80 support to set disassemble
2613 to print_insn_tic80.
2614 * tic80-dis.c (print_insn_tic80): Add stub.
2616 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2618 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2619 * configure: Regenerate with autoconf.
2620 * tic80-dis.c: Add file.
2621 * tic80-opc.c: Add file.
2623 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2625 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2627 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2629 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2630 (mn10200_opcodes): Use it for some logicals and btst insns.
2631 Add "break" and "trap" instructions.
2633 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2635 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2637 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2639 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2640 relative load or add now depends upon whether the instruction is
2643 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2645 * mn10200-dis.c: Finish writing disassembler.
2646 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2647 Fix mask for "jmp (an)".
2649 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2650 handle endianness issues for mn10300.
2652 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2654 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2656 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2657 instruction. Fix opcode field for "movb (imm24),dn".
2659 * mn10200-opc.c (mn10200_operands): Fix insertion position
2662 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2664 * mn10200-opc.c: Create mn10200 opcode table.
2665 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2666 but moving along nicely.
2668 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2670 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2672 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2674 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2675 specifiers for fmovem* instructions.
2677 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2679 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2681 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2683 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2686 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2688 * mn10300-opc.c: Add some comments explaining the various
2691 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2693 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2695 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2698 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2699 operand specifiers in fmovm* instructions.
2701 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2703 * ppc-opc.c (insert_li): Give an error if the offset has the two
2704 least significant bits set.
2706 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2708 * mips-dis.c (print_insn_mips16): Separate the instruction from
2709 the arguments with a tab, not a space.
2711 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2713 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2716 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2719 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2721 * configure: Rebuild with autoconf 2.12.
2723 Add support for mips16 (16 bit MIPS implementation):
2724 * mips16-opc.c: New file.
2725 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2726 (mips16_reg_names): New static array.
2727 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2728 after seeing a 16 bit symbol.
2729 (print_insn_little_mips): Likewise.
2730 (print_insn_mips16): New static function.
2731 (print_mips16_insn_arg): New static function.
2732 * mips-opc.c: Add jalx instruction.
2733 * Makefile.in (mips16-opc.o): New target.
2734 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2735 * configure: Rebuild.
2737 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2739 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2740 operand specifiers in *save, *restore and movem* instructions.
2742 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2745 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2746 register operands for immediate arithmetic, not, neg, negx, and
2747 set according to condition instructions.
2749 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2750 specifier of the effective-address operand in immediate forms of
2751 arithmetic instructions. The specifier for the immediate operand
2752 notes how and where the constant will be stored.
2754 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2756 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2759 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2762 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2764 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2766 * mn10300-dis.c (disassemble): Handle register lists.
2768 * mn10300-opc.c: Fix handling of register list operand for
2769 "call", "ret", and "rets" instructions.
2771 * mn10300-dis.c (disassemble): Print PC-relative and memory
2772 addresses symbolically if possible.
2773 * mn10300-opc.c: Distinguish between absolute memory addresses,
2774 pc-relative offsets & random immediates.
2776 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2778 (disassemble): Handle SPLIT and EXTENDED operands.
2780 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2782 * mn10300-dis.c: Rough cut at printing some operands.
2784 * mn10300-dis.c: Start working on disassembler support.
2785 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2787 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2789 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2791 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2793 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2795 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2797 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2798 register argument is calls and jmp instructions.
2800 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2802 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2803 getx operand. Fix opcode for mulqu imm,dn.
2805 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2807 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2808 in MN10300_OPERAND_SPLIT operands for how many bits
2809 appear in the basic insn word. Add IMM32_HIGH24,
2810 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2811 (mn10300_opcodes): Use new operands as needed.
2813 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2814 for bset, bclr, btst instructions.
2815 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2817 * mn10300-opc.c (mn10300_operands): Remove many redundant
2818 operands. Update opcode table as appropriate.
2819 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2820 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2822 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2824 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2825 operands (for indexed load/stores). Fix bitpos for DI
2826 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2827 few instructions that insert immediates/displacements in the
2828 middle of the instruction. Add IMM8E for 8 bit immediate in
2829 the extended part of an instruction.
2830 (mn10300_operands): Use new opcodes as appropriate.
2832 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2834 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2835 sequential so the assembler never parallelizes it with
2838 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2840 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2841 a data/address register that appears in register field 0
2842 and register field 1.
2843 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2845 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2847 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2848 standard disassembly.
2850 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2851 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2852 Recategorize PALcode instructions.
2854 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2856 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2858 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2860 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2861 there are no operand types.
2863 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2865 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2867 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2869 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2871 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2873 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2875 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2876 and sst.w instructions.
2878 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2881 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2883 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2886 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2888 * ppc-opc.c (PPCPWR2): Define.
2889 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2892 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2894 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2895 field for movhu instruction.
2897 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2898 cast value to "long" not "signed long" to keep hpux10
2901 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2903 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2906 * mn10300-opc.c (FMT*): Remove definitions.
2908 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2909 for shift-by-register opcodes.
2911 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2912 into [AD][MN][01] for encoding the position of the register
2915 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2917 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2918 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2920 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2922 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2923 Fix various typos. Add "PAREN" operand.
2924 (MEM, MEM2): Define.
2925 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2926 operands. Fix several typos.
2928 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2931 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2933 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2934 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2936 (mn10300_opcodes): Break opcode format out into its own field.
2937 Update many operand fields to deal with signed vs unsigned
2938 issues. Fix one or two typos in the "mov" instruction
2939 opcode, mask and/or operand fields.
2941 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2943 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2944 m68851 wasn't reset.
2946 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2948 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2949 all opcodes. Very rough cut at operands for all opcodes.
2951 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2954 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2956 * mn10200-opc.c, mn10300-opc.c: New files.
2957 * mn10200-dis.c, mn10300-dis.c: New files.
2958 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2959 * disassemble.c: Break mn10x00 support into 10200 and 10300
2961 * configure.in: Likewise.
2962 * configure: Rebuilt.
2964 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2966 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2968 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2970 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2972 * disassemble (ARCH_mn10x00): Define.
2973 (disassembler): Handle bfd_arch_mn10x00.
2974 * configure.in: Recognize bfd_mn10x00_arch.
2975 * configure: Rebuilt.
2977 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2979 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2980 accordingly. Don't declare functions using op_rtn.
2982 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2984 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2985 params to be more standard.
2986 * (disassemble): Print absolute addresses and symbolic names for
2987 branch and jump targets.
2988 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2990 * (v850_opcodes): Add breakpoint insn.
2992 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2994 * m68k-opc.c: Move the fmovemx data register cases before the
2995 other cases, so that they get recognized before the data register
2996 does gets treated as a degenerate register list.
2998 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3000 * mips-opc.c: Add a case for "div" and "divu" with two registers
3001 and a destination of $0.
3003 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3005 * mips-dis.c (print_insn_arg): Add prototype.
3006 (_print_insn_mips): Ditto.
3008 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3010 * mips-dis.c (print_insn_arg): Print condition code registers as
3013 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3015 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3017 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3019 * v850-dis.c (disassemble): Make static. Provide prototype.
3021 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3023 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3026 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3028 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3029 ']' characters into the output stream.
3030 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3031 Add "memop" field to all opcodes (for the disassembler).
3032 Reorder opcodes so that "nop" comes before "mov" and "jr"
3033 comes before "jarl".
3035 * v850-dis.c (print_insn_v850): Fix typo in last change.
3037 * v850-dis.c (print_insn_v850): Properly handle disassembling
3038 a two byte insn at the end of a memory region when the memory
3039 region's size is only two byte aligned.
3041 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3043 * v850-dis.c (v850_reg_names): Define.
3044 (v850_sreg_names, v850_cc_names): Likewise.
3045 (disassemble): Very rough cut at printing operands (unformatted).
3047 * v850-opc.c (BOP_MASK): Fix.
3048 (v850_opcodes): Fix mask for jarl and jr.
3050 * v850-dis.c: New file. Skeleton for disassembler support.
3051 * Makefile.in Remove v850 references, they're not needed here.
3052 * configure.in: Add v850-dis.o when building v850 toolchains.
3053 * configure: Rebuilt.
3054 * disassemble.c (disassembler): Call v850 disassembler.
3056 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3057 (insert_d8_6, extract_d8_6): New functions.
3058 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3059 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3061 (IF4A, IF4B): Use "D7" instead of "D7S".
3062 (IF4C, IF4D): Use "D8_7" instead of "D8".
3063 (IF4E, IF4F): New. Use "D8_6".
3064 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3065 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3067 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3068 (v850_operands): Change D16 to D16_15, use special insert/extract
3069 routines. New new D16 that uses the generic insert/extract code.
3070 (IF7A, IF7B): Use D16_15.
3071 (IF7C, IF7D): New. Use D16.
3072 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3074 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3075 message. Issue an error if the branch offset is odd.
3077 * v850-opc.c: Add notes about needing special insert/extract
3078 for all the load/store insns, except "ld.b" and "st.b".
3080 * v850-opc.c (insert_d22, extract_d22): New functions.
3081 (v850_operands): Use insert_d22 and extract_d22 for
3083 (insert_d9): Fix range check.
3085 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3087 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3088 and set bits field to D9 and D22 operands.
3090 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3092 * v850-opc.c (v850_operands): Define SR2 operand.
3093 (v850_opcodes): "ldsr" uses R1,SR2.
3095 * v850-opc.c (v850_opcodes): Fix opcode specs for
3096 sld.w, sst.b, sst.h, sst.w, and nop.
3098 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3100 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3101 end of the opcode table.
3103 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3105 * d10v-opc.c (pre_defined_registers): Added register pairs,
3106 "r0-r1", "r2-r3", etc.
3108 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3110 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3111 Create I16U for an unsigned 16bit mmediate operand.
3112 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3114 * v850-opc.c (v850_operands): Define EP operand.
3115 (IF4A, IF4B, IF4C, IF4D): Use EP.
3117 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3118 with immediate operand, "movhi". Tweak "ldsr".
3120 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3121 correct. Get sld.[bhw] and sst.[bhw] closer.
3123 * v850-opc.c (v850_operands): "not" is a two byte insn
3125 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3127 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3129 * v850-opc.c (two): Get order of words correct.
3131 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3133 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3134 register source and destination operands.
3135 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3137 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3138 same thinko in "trap" opcode.
3140 * v850-opc.c (v850_opcodes): Add initializer for size field
3143 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3144 Add D8 for 8-bit unsigned field in short load/store insns.
3145 (IF4A, IF4D): These both need two registers.
3146 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3147 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3148 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3149 for "ldsr" and "stsr".
3150 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3153 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3154 short store word (sst.w).
3156 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3158 * v850-opc.c (v850_operands): Added insert and extract fields,
3159 pointers to functions that handle unusual operand encodings.
3161 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3163 * v850-opc.c (v850_opcodes): Enable "trap".
3165 * v850-opc.c (v850_opcodes): Fix order of displacement
3166 and register for "set1", "clr1", "not1", and "tst1".
3168 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3170 * v850-opc.c (v850_operands): Add "B3" support.
3171 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3174 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3176 * v850-opc.c: Close unterminated comment.
3178 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3180 * v850-opc.c (v850_operands): Add flags field.
3181 (v850_opcodes): add move opcodes.
3183 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3185 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3186 * configure: (bfd_v850v_arch) Add new case.
3187 * configure.in: (bfd_v850_arch) Add new case.
3188 * v850-opc.c: New file.
3190 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3192 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3194 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3196 * d10v-opc.c: Add additional information to the opcode
3197 table to help determinine which instructions can be done
3200 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3202 * mpw-make.sed: Update editing of include pathnames to be
3205 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3207 * arm-opc.h: Added "bx" instruction definition.
3209 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3211 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3213 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3215 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3217 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3219 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3221 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3223 * makefile.vms: Update for alpha-opc changes.
3225 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3227 * i386-dis.c (print_insn_i386): Actually return the correct value.
3228 (ONE, OP_ONE): #ifdef out; not used.
3230 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3232 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3233 Changed subi operand type to treat 0 as 16.
3235 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3237 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3240 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3242 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3243 memory transfer instructions. Add new format string entries %h and %s.
3244 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3247 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3249 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3250 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3252 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3254 * alpha-dis.c (print_insn_alpha_osf): Remove.
3255 (print_insn_alpha_vms): Remove.
3256 (print_insn_alpha): Make globally visible. Chose the register
3257 names based on info->flavour.
3258 * disassemble.c: Always return print_insn_alpha for the alpha.
3260 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3262 * d10v-dis.c (dis_long): Handle unknown opcodes.
3264 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3266 * d10v-opc.c: Changes to support signed and unsigned numbers.
3267 All instructions with the same name that have long and short forms
3268 now end in ".l" or ".s". Divs added.
3269 * d10v-dis.c: Changes to support signed and unsigned numbers.
3271 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3273 * d10v-dis.c: Change all functions to use info->print_address_func.
3275 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3277 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3278 move ccr/sr insns more strict so that the disassembler only
3279 selects them when the addressing mode is data register.
3281 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3282 * d10v-opc.c (pre_defined_registers): Declare.
3283 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3284 to pick a better name for the registers.
3286 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3288 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3289 operands for fexpand and fpmerge. From Christian Kuehnke
3290 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3292 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3294 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3295 print routine. Take new regnames and cpumask arguments.
3296 Kill the environment variable nonsense.
3297 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3298 (print_insn_alpha_vms): New function. Do VMS style regnames.
3299 * disassemble.c (disassembler): Test bfd flavour to pick
3300 between OSF and VMS routines. Default to OSF.
3302 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3304 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3305 * configure: Rebuild.
3306 * Makefile.in (install): Use @INSTALL_SHLIB@.
3308 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3310 * configure: (bfd_d10v_arch) Add new case.
3311 * configure.in: (bfd_d10v_arch) Add new case.
3312 * d10v-dis.c: New file.
3313 * d10v-opc.c: New file.
3314 * disassemble.c (disassembler) Add entry for d10v.
3316 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3318 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3319 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3321 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3323 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3324 distinguish between variants of the instruction set.
3325 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3326 distinguish between variants of the instruction set.
3328 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3330 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3331 the 8086 instruction set.
3332 * i386-dis.c: General cleanups. Make most things static. Add
3333 prototypes. Get rid of static variables aflags and dflags. Pass
3334 them as args (to almost everything).
3336 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3338 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3340 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3342 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3343 if the next arg is marked with SRC_IN_DST. Gross.
3345 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3346 we're looking for and find EXR.
3348 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3349 if we're looking for KBIT and we don't find it.
3351 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3354 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3355 3bit immediate operands.
3357 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3359 * Released binutils 2.7.
3361 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3362 <kkaempf@progis.ac-net.de>.
3364 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3366 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3368 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3370 * sparc-dis.c (print_insn_sparclite): New routine to print
3371 sparclite instructions.
3373 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3375 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3377 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3379 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3380 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3381 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3383 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3385 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3386 Use autoconf-set values.
3387 (docdir, oldincludedir): Removed.
3388 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3390 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3392 * alpha-opc.c: New file.
3393 * alpha-opc.h: Remove.
3394 * alpha-dis.c: Complete rewrite to use new opcode table.
3395 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3396 * configure: Rebuild with autoconf 2.10.
3397 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3398 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3400 (alpha-opc.o): New target.
3402 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3404 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3405 Set imm_added_to_rs1 even if the source and destination register
3408 * sparc-opc.c: Add some two operand forms of the wr instruction.
3410 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3412 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3415 * disassemble.c (disassembler): Handle H8/S.
3416 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3418 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3420 * sparc-opc.c: Add beq/teq as aliases for be/te.
3422 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3423 <sergei@msil.sps.mot.com>.
3425 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3427 * makefile.vms: New file.
3429 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3431 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3433 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3436 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3438 * i386-dis.c (OP_OFF): Call append_prefix.
3440 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3442 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3443 unsigned long to silence a warning from the Solaris PowerPC
3446 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3448 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3450 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3452 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3454 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3455 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3456 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3457 cpush, cpusha, cpull sparclet insns.
3459 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3461 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3463 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3465 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3466 Set F_FLOAT on other floating point instructions.
3468 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3470 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3472 (powerpc_opcodes): Add 860/821 specific SPRs.
3474 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3476 * configure.in: Permit --enable-shared to specify a list of
3477 directories. Set and substitute BFD_PICLIST.
3478 * configure: Rebuild.
3479 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3480 uses. Set to @BFD_PICLIST@.
3482 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3484 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3485 not "abs", which may be needed for the absolute in something
3486 like btst #0,@10:8. Print L_3 immediates separately from other
3487 immediates. Change ABSMOV reference to ABS8MEM.
3489 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3491 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3492 (current_arch_mask): New static global.
3493 (compute_arch_mask): New static function.
3494 (print_insn_sparc): Delete sparc_v9_p. New static local
3495 current_mach. Resort opcode table if current_mach changes.
3496 Generalize "insn not supported" test.
3497 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3498 Delete test for v9/!v9.
3499 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3501 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3502 (brfcx): Renamed to FBRX.
3503 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3504 coprocessor mnemonics are not supported on the sparclet).
3505 (condf): Renamed to CONDF.
3506 (SLCBCC2): Delete F_ALIAS flag.
3508 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3510 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3511 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3513 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3515 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3516 that the shared library version number is set correctly.
3518 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3520 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3521 Miles Bader <miles@gnu.ai.mit.edu>.
3522 * configure: Rebuild.
3524 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3526 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3529 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3531 * configure: Rebuild with autoconf 2.8.
3533 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3535 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3536 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3538 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3540 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3541 since they appear as targets in Makefile.in.
3542 * configure: Rebuild.
3544 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3546 * mpw-make.sed: Edit out shared library support bits.
3548 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3550 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3551 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3552 (sparc_opcodes): Add sparclet insns.
3553 (sparclet_cpreg_table): New static local.
3554 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3555 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3557 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3559 * i386-dis.c (index16): New static variable.
3560 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3562 (OP_indirE): Return result of OP_E.
3563 (OP_E): Check for 16 bit addressing mode, and disassemble
3564 correctly. Optimised 32 bit case a little. Don't print
3565 "(base,index,scale)" when sib specifies only an offset.
3567 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3569 * configure.in: Set and substitute SHLIB_DEP.
3570 * configure: Rebuild.
3571 * Makefile.in (SHLIB_DEP): New variable.
3572 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3573 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3574 COMMON_SHLIB, add them to piclist with appropriate modifications.
3575 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3576 here: just use piclist.
3578 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3580 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3581 (print_insn_sparc): Rewrite v9/not-v9 tests.
3582 (compare_opcodes): Likewise.
3583 * sparc-opc.c (MASK_<ARCH>): Define.
3584 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3585 (sparclet,v6notv9): Define.
3586 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3587 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3589 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3591 * configure.in: Call AC_PROG_CC before configure.host.
3592 * configure: Rebuild.
3594 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3596 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3598 * i386-dis.c (onebyte_has_modrm): New static array.
3599 (twobyte_has_modrm): New static array.
3600 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3602 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3604 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3607 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3609 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3612 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3614 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3615 m68010up, not just m68020up | cpu32.
3617 * Makefile.in (SONAME): New variable.
3618 ($(SHLINK)): Make a link to the transformed name, as well.
3619 (stamp-tshlink): New target.
3620 (install): Skip stamp-tshlink during install.
3622 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3624 * configure.in: Call AC_ARG_PROGRAM.
3625 * configure: Rebuild.
3626 * Makefile.in (program_transform_name): New variable.
3627 (install): Transform library name before installing it.
3629 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3631 * i960-dis.c (mem): Add HX dcinva instruction.
3633 Support for building as a shared library, based on patches from
3634 Alan Modra <alan@spri.levels.unisa.edu.au>:
3635 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3636 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3637 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3638 * configure: Rebuild.
3639 * Makefile.in (ALLLIBS): New variable.
3640 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3641 (COMMON_SHLIB, SHLINK): New variables.
3642 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3643 (STAGESTUFF): Remove variable.
3644 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3645 (stamp-piclist, piclist): New targets.
3646 ($(SHLIB), $(SHLINK)): New targets.
3647 ($(OFILES)): Depend upon stamp-picdir.
3648 (disassemble.o): Build twice if PICFLAG is set.
3649 (MOSTLYCLEAN): Add pic/*.o.
3650 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3651 (distclean): Remove pic and stamp-picdir.
3652 (install): Install shared libraries.
3653 (stamp-picdir): New target.
3655 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3657 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3658 Print unknown instruction as "unknown", rather than in hex.
3660 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3662 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3664 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3666 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3668 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3670 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3671 when necessary. From Ulrich Drepper
3672 <drepper@myware.rz.uni-karlsruhe.de>.
3674 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3676 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3677 sparc_num_opcodes. Update architecture enum values.
3678 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3679 (sparc_opcode_lookup_arch): New function.
3680 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3681 (sparc_opcodes): Add v9a shutdown insn.
3683 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3685 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3686 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3688 (print_insn_sparc64): Deleted.
3689 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3692 * sparc-opc.c (architecture_pname): Add v9a.
3694 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3696 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3697 incorrectly defined as 0x16 when it should be 0x15.
3698 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3699 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3700 excb (exception barrier) which is defined in the Alpha
3701 Architecture Handbook version 2.
3702 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3703 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3704 disassembled as or, for example.
3706 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3708 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3709 (_print_insn_mips): Change i from int to unsigned int.
3711 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3713 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3714 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3716 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3718 * i386-dis.c: Added Pentium Pro instructions.
3720 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3722 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3725 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3727 * sh-opc.h (sh_nibble_type): Added REG_B.
3728 (sh_arg_type): Added A_REG_B.
3729 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3731 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3733 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3735 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3737 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3739 * Makefile.in (distclean): Remove stamp-h. From Ronald
3740 F. Guilmette <rfg@monkeys.com>.
3742 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3744 From David Mosberger-Tang <davidm@azstarnet.com>:
3745 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3748 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3750 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3751 (sh_table): Added many SH3 opcodes.
3752 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3754 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3756 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3757 (subco,subco.): Mark this PPC, not PPCCOM.
3759 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3761 * configure: Rebuild with autoconf 2.7.
3763 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3765 * configure: Rebuild with autoconf 2.6.
3767 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3769 * configure.in: Sort list of architectures. Accept but do nothing
3770 for alliant, convex, pyramid, romp, and tahoe.
3772 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3774 * a29k-dis.c (print_special): Change num to unsigned int.
3776 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3778 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3781 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3783 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3784 * configure: Rebuilt.
3786 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3788 * configure.in: Add case for bfd_i860_arch.
3789 * configure: Rebuild.
3791 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3793 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3794 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3795 (NEXTDOUBLE): Likewise.
3796 (print_insn_m68k): Don't match fmoveml if there is more than one
3797 register in the list.
3798 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3800 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3802 * m68k-opc.c: Use #W rather than #w.
3803 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3805 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3807 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3808 and likewise for all the dbxx opcodes.
3810 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3812 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3814 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3816 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3817 the VR4100 specific instructions to the mips_opcodes structure.
3819 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3821 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3822 ugly Metrowerks bug in CW6, is fixed in CW7.
3824 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3826 * ppc-opc.c (whole file): Add flags for common/any support.
3828 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3830 * Makefile.in (BISON): Remove macro.
3831 (FLAGS_TO_PASS): Remove BISON.
3833 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3835 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3837 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3838 instructions that take no args by looking at the match mask.
3839 (print_insn_arg): Always print "%" before register names.
3840 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3841 [case '_']: Don't print "@#" before address.
3842 [case 'J']: Use "%s" as format string, not register name.
3843 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3845 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3847 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3850 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3852 From David Mosberger-Tang <davidm@azstarnet.com>
3854 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3855 (alpha_insn_set): added definitions for VAX floating point
3856 instructions (Unix compilers don't generate these, but handcoded
3857 assembly might still use them).
3859 * alpha-dis.c (print_insn_alpha): added support for disassembling
3860 the miscellaneous instructions in the Alpha instruction set.
3862 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3864 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3865 no longer create sysdep.h, sed ppc-opc.c to work around a
3866 serious Metrowerks C bug.
3867 * mpw-make.in: Remove.
3868 * mpw-make.sed: New file, used by mpw-configure to edit
3869 Makefile.in into an MPW makefile.
3871 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3873 * Makefile.in (maintainer-clean): New synonym for realclean.
3875 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3877 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3878 which use '0', '1', and '2' instead. Specify the proper size for
3879 a pmove immediate operand. Correct the pmovefd patterns to be
3880 moves to a register, not from a register.
3881 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3883 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3885 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3886 %psr, %wim, %tbr as F_NOTV9.
3888 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3890 * Makefile.in (Makefile): Just rebuild Makefile when running
3892 (config.h, stamp-h): New targets.
3893 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3894 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3895 rebuilding config.h.
3896 * configure: Rebuild.
3898 * mips-opc.c: Change unaligned loads and stores with "t,A"
3899 operands to use "t,A(b)".
3901 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3903 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3905 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3907 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3908 until 3 instead of until 2.
3910 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3912 * Makefile.in (ALL_CFLAGS): Define.
3913 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3914 (MOSTLYCLEAN): Add config.log.
3915 (distclean): Don't remove config.log.
3916 * configure.in: Substitute HDEFINES.
3917 * configure: Rebuild.
3919 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3921 * sh-opc.h (sh_arg_type): Add F_FR0.
3922 (sh_table, case fmac): Add F_FR0 as first argument.
3924 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3926 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3928 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3930 * sparc-dis.c: Remove all references to NO_V9.
3932 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3934 * aclocal.m4: Just include ../bfd/aclocal.m4.
3935 * configure: Rebuild.
3937 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3939 * sparc-dis.c (X_DISP19): Define.
3940 (print_insn, case 'G'): Use it.
3941 (print_insn, case 'L'): Sign extend displacement.
3943 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3945 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3946 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3947 host_makefile_frag or frags.
3948 * aclocal.m4: New file.
3949 * configure: Rebuild.
3950 * Makefile.in (INSTALL): Set to @INSTALL@.
3951 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3952 (INSTALL_DATA): Set to @INSTALL_DATA@.
3954 (AR_FLAGS): Set to rc rather than qc.
3955 (CC): Define as @CC@.
3956 (CFLAGS): Set to @CFLAGS@.
3957 (@host_makefile_frag@): Remove.
3958 (config.status): Remove dependency upon @frags@.
3960 * configure.in: ../bfd/config.bfd now just sets shell variables.
3961 Use them rather than looking through target Makefile fragments.
3962 * configure: Rebuild.
3964 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3966 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3968 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3970 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3971 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3974 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3975 (lookup_{name,value}): New functions.
3976 (prefetch_table): New static local.
3977 (sparc_{encode,decode}_prefetch): New functions.
3978 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3980 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3982 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3985 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3987 * sh-dis.c: Correct comment on first line of file.
3989 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3991 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3993 * sparc-opc.c (asi, membar): New static locals.
3994 (sparc_{encode,decode}_{asi,membar}): New functions.
3995 (sparc_opcodes, membar insn): Fix.
3996 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3997 Support decoding of membar masks.
4000 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4002 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4004 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4006 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4007 and likewise for the other branches. Add bhs as an alias for bcc,
4008 and likewise for the size variants. Add dbhs as an alias for
4011 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4013 * sh-opc.h (FP sts instructions): Update to match reality.
4015 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4017 * m68k-dis.c: (fpcr_names): Add % before all register names.
4018 (reg_names): Likewise.
4019 (print_insn_arg): Don't explicitly print % before register names.
4020 Add % before register names in static array names. In case 'r',
4021 print data registers as `@(Dn)', not `Dn@'. When printing a
4022 memory address, don't print @# before it.
4023 (print_indexed): Change base_disp and outer_disp from int to
4024 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4025 syntax. Sign extend 8 byte displacement correctly.
4026 (print_base): Print using MIT syntax. Print zpc when appropriate.
4027 Change parameter disp from int to bfd_vma.
4029 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4032 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4034 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4035 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4036 * sh-opc.h (sh_arg_type): Add new operand types.
4037 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4039 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4041 * Makefile.in (distclean): Remove generated file config.h.
4043 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4045 * Makefile.in (distclean): Remove generated file config.h.
4047 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4049 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4051 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4053 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4054 rather than numopcodes. Use m68k_opcodes rather than removed
4055 opcode function. Don't check F_ALIAS.
4056 (print_insn_arg): Change first parameter to be const char *.
4057 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4058 (m68k-opc.o): New target.
4059 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4060 * configure: Rebuild.
4062 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4064 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4065 (opcode_bits, opcode_hash_table): New variables.
4066 (opcodes_initialized): Renamed from opcodes_sorted.
4067 (build_hash_table): New function.
4068 (is_delayed_branch): Use hash table.
4069 (print_insn): Renamed from print_insn_sparc, made static.
4070 Build and use hash table. If !sparc64, ignore sparc64 insns,
4071 and vice-versa if sparc64.
4072 (print_insn_sparc, print_insn_sparc64): New functions.
4073 (compare_opcodes): Move sparc64 opcodes to end.
4074 Print commutative insns with constant second.
4075 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4077 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4079 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4080 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4081 avoids printing a delay slot in a delay slot.
4082 * sh-opc.h (sh_table): Fully bracket last entry.
4084 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4086 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4088 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4090 * configure.in: Get host_makefile_frag from ${srcdir}.
4092 * configure.in: Autoconfiscated. Check for string[s].h. Create
4093 config.h from config.in. Don't set up sysdep.h link.
4094 * sysdep.h: New file.
4095 * configure, config.in: New files, generated from configure.in.
4096 * Makefile.in: Updated to be processed autoconf-style.
4097 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4098 (Makefile): Depend on config.status.
4099 (config.status): New rule.
4100 * configure.bat: Update Makefile substitutions.
4102 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4104 * mips-opc.c (L1): Define.
4105 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4106 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4109 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4111 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4112 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4113 have multiple add units but only a single logical unit.
4115 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4116 shifted by 18, without any insertion or extraction function.
4117 (insert_cr, extract_cr): Remove.
4119 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4121 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4124 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4126 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4127 * sh-opc.h: Add copyright.
4129 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4131 * Makefile.in (crunch-m68k): Delete extra target accidentally
4132 checked in a while ago.
4134 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4136 * sh-opc.h (sh_table): Add SH3 support.
4138 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4140 * sh-opc.h: Added bsrf and braf.
4142 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4144 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4145 bogus [ls]fm{ea,fd} patterns.
4147 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4148 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4149 initialize it from memory. Make function static.
4150 (print_insn_{big,little}_arm): New functions.
4151 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4152 the correct endianness.
4154 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4156 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4159 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4161 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4162 17th, so that it builds again using GCC as the compiler.
4164 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4166 * mips-dis.c (print_insn_little_mips): Cast return value from
4167 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4168 expects an unsigned long, and that might be fewer words of
4169 argument storage (e.g., if bfd_vma is long long on a 32-bit
4171 (print_insn_big_mips): Likewise with bfd_getb32 value.
4172 (_print_insn_mips): Now static.
4174 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4176 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4177 gcc memory hog problem with initializer is fixed.
4179 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4181 Merge in support for Mac MPW as a host.
4182 (Old change descriptions retained for informational value.)
4184 * mpw-config.in (archname): Compute from the config.
4185 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4187 * mpw-config.in (target_arch): Compute from canonical target.
4188 (m68k, mips, powerpc, sparc): Add architectures.
4189 * mpw-make.in (disassemble.c.o): Add.
4190 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4192 * mpw-config.in (BFD_MACHINES): Set to a default value.
4193 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4195 * mpw-make.in (CSEARCH): Add extra-include to search path.
4197 * mpw-config.in (varargs.h): Don't create.
4198 (sysdep.h): Create using forward-include.
4199 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4201 * mpw-config.in: New file, MPW version of configure.in.
4202 * mpw-make.in: New file, MPW version of Makefile.in.
4204 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4206 * alpha-dis.c (print_insn_alpha): Put empty statement after
4209 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4211 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4212 (low_sign_extend): Likewise.
4213 (get_field): Delete unused function.
4214 (set_field, deposit_14, deposit_21): Likewise.
4216 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4218 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4221 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4223 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4225 * alpha-opc.h (OSF_ASMCODE): define
4226 print pal-code names as defined in App C of the
4227 Alpha Architecture Reference Manual
4229 * alpha-dis.c: cleaned up output
4230 print stylized code forms as defined in App A.4.3 of the
4231 Alpha Architecture Reference Manual
4233 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4235 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4237 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4240 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4242 * m68k-dis.c (opcode): New function. Returns address of opcode
4243 table entry given index, even if the opcode table was split to
4244 work around gcc bugs.
4245 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4247 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4248 (reg_names): Now const.
4249 (print_insn_arg): Arrays cacheFieldName and names now const.
4250 (print_indexed): Array scales now const.
4252 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4254 * ppc-opc.c: Sort recently added instructions by minor opcode
4255 number within major opcode number.
4257 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4259 * hppa-dis.c: Include libhppa.h.
4261 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4263 * mips-opc.c: Change dli to use M_DLI, and add dla.
4265 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4267 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4269 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4271 * mips-opc.c: Add r4650 mul instruction.
4273 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4275 * mips-opc.c: Add uld and usd macros for unaligned double load and
4278 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4280 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4281 mfdcr, mtdcr, icbt, iccci.
4283 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4285 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4286 signed char fields to shorts, more portable.
4288 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4290 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4291 char fields as signed chars, since they may have negative values.
4293 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4295 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4296 (mycroft@netbsd.org).
4298 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4300 From "Logg, Ed" <elogg@ea.com>:
4301 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4302 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4305 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4307 * ppc-opc.c: Changes based on patch from David Edelsohn
4308 <edelsohn@mhpcc.edu>.
4309 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4312 (insert_tbr): New static function.
4313 (extract_tbr): New static function.
4314 (XFXFXM_MASK, XFXM): Define.
4315 (XSPRBAT_MASK, XSPRG_MASK): Define.
4316 (powerpc_opcodes): Add instructions to access special registers by
4317 name. Add mtcr and mftbu.
4319 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4321 * mips-opc.c (P3): Define.
4322 (mips_opcodes): Add mad and madu.
4324 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4326 * configure.in: Add W65 support.
4327 * disassemble.c: Likewise.
4328 * w65-opc.h, w65-dis.c: New files.
4330 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4332 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4335 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4337 * mips-opc.c: Add dli as a synonym for li.
4339 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4341 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4342 print something for reserved opcode values, even if it won't
4345 * mips-dis.c (_print_insn_mips): When initializing, shift right
4346 and mask, to avoid sign extension problems on the Alpha.
4348 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4351 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4353 * sh-opc.h (mov.l gbr): Get direction right.
4354 * sh-dis.c (print_insn_shx): New function.
4355 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4356 print opcodes with right byte order.
4358 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4360 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4361 to avoid conflicts with getopt.
4363 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4365 * hppa-dis.c (print_insn_hppa): Read the instruction using
4366 bfd_getb32, so that it works on a little endian or 64 bit host.
4367 Remove unused local variable op.
4369 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4371 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4372 addu does not work correctly if -mips3.
4374 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4376 * a29k-dis.c (print_special): Add special register names defined
4377 on 29030, 29040 and 29050.
4378 (print_insn): Handle new operand type 'I'.
4380 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4382 * Makefile.in (INSTALL): Use top level install.sh script.
4384 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4386 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4387 that it works on a little endian host.
4389 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4391 * configure.in: Use ${config_shell} when running config.bfd.
4393 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4395 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4397 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4399 * a29k-dis.c (print_insn): Print the opcode.
4401 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4403 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4405 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4407 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4409 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4411 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4412 which store a value into memory.
4414 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4416 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4417 * arm-dis.c, arm-opc.h: New files.
4419 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4421 * Makefile.in (ns32k-dis.o): Add dependency.
4422 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4423 string, not as array of chars.
4425 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4427 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4429 * sparc-opc.c: Added sparclite extended FP operations, and
4430 versions of v9 impdep* instructions permitting specification of
4433 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4435 * i960-dis.c (reg_names): Now const.
4436 (struct sparse_tabent): New type, copied from array type in mem
4438 (ctrl): Local static array ctrl_tab now const.
4439 (cobr): Local static array cobr_tab now const.
4440 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4441 static variable mem_tab no longer explicitly initialized. Changed
4442 mem_init to const array of struct sparse_tabent.
4443 (reg): Local static variable reg_tab no longer explicitly
4444 initialized. Changed reg_init to const array of struct
4446 (ea): Local static array scale_tab now const.
4448 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4451 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4453 * configure.bat: the disassember needs to be enabled for
4454 "objdump -d" to work in djgpp.
4456 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4458 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4459 (invalid_float): Enabled general version, doesn't require running
4460 on ns32k host. Changed to take char* argument, and test for
4461 explicitly specified sizes, instead of using sizeof() on host CPU
4463 (INVALID_FLOAT): Cast first argument.
4464 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4465 list_P032, list_M032): Now const.
4466 (optlist, list_search): Made appropriate arguments now point to
4468 (print_insn_arg): Changed static array of one-character-string
4469 pointers into a static const array of characters; fixed sprintf
4470 statement accordingly.
4472 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4474 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4475 from distribution. A ns32k-dis.c from a previous distribution has
4476 been brought up to date and supports the new interface.
4478 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4480 * configure.in: add bfd_ns32k_arch target support.
4482 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4483 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4485 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4487 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4490 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4492 * h8300-dis.c, mips-dis.c: Don't use true and false.
4494 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4496 * configure.in: Change --with-targets to --enable-targets.
4498 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4500 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4501 opcodes to the first instruction with that opcode, to speed
4502 disassembly of large files. From ralphc@pyramid.com (Ralph
4505 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4507 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4509 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4511 * configure.bat: update to latest makefile.in
4513 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4515 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4516 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4517 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4518 slot insn is in a delay slot.
4519 * z8k-opc.h: (resflg): Fix patterns.
4520 * h8500-opc.h Fix CR insn patterns.
4522 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4524 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4525 "cmpl" before POWER versions, so that gas -many uses them.
4527 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4529 * disassemble.c: New file.
4530 * Makefile.in (OFILES): Add disassemble.o.
4531 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4532 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4533 binutils/configure.in.
4535 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4536 opcode being examined.
4538 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4540 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4541 (insert_ral, insert_ram, insert_ras): New functions.
4542 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4543 RAS for store with update.
4545 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4547 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4548 (edelsohn@npac.syr.edu).
4550 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4552 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4555 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4557 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4559 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4561 * ppc-opc.c (powerpc_operands): The signedp field has been
4562 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4563 instead. Add new operand SISIGNOPT.
4564 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4565 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4566 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4569 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4571 * i386-dis.c (struct private): Renamed to dis_private. `private'
4572 is a reserved word for dynix cc.
4574 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4576 * configure.in: Change error message to refer to bfd/config.bfd
4577 rather than bfd/configure.in.
4579 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4581 * ppc-opc.c: Define POWER2 as short alias flag.
4582 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4585 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4587 * i960-dis.c (print_insn_i960): Don't read a second word for
4588 opcodes 0, 1, 2 and 3.
4590 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4592 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4594 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4596 * m68881-ext.c: Removed; no longer used.
4597 * Makefile.in: Changed accordingly.
4599 * m68k-dis.c (ext_format_68881): Don't declare.
4600 (print_insn_m68k): If an instruction uses place 'i', it uses at
4601 least four fixed bytes.
4602 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4603 extended float, convert to double using floatformat_to_double, not
4604 ieee_extended_to_double, and fetch the data before converting it.
4606 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4608 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4609 davidj@ICSI.Berkeley.EDU (David Johnson).
4611 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4613 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4614 PowerPC uses bdnz[l][a].
4616 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4618 * dis-buf.c, i386-dis.c: Include sysdep.h.
4620 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4622 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4624 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4625 by Motorola PowerPC 601 with PPC_OPCODE_601.
4626 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4627 Disassemble Motorola PowerPC 601 instructions as well as normal
4628 PowerPC instructions.
4630 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4632 * i960-dis.c (reg, mem): Just use a static array instead of
4635 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4637 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4638 condition name index if this is for a negated condition.
4640 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4641 Floating point format for 'H' operand is backwards from normal
4642 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4643 operands (fmpyadd and fmpysub), handle bizarre register
4644 translation correctly for single precision format.
4646 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4647 or 'I' operands if the next format specifier is 'M' (fcmp
4648 condition completer).
4650 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4652 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4653 single number giving a bitmask for the MB and ME fields of an M
4654 form instruction. Change NB to accept 32, and turn it into 0;
4655 also turn 0 into 32 when disassembling. Seperated SH from NB.
4656 (insert_mbe, extract_mbe): New functions.
4657 (insert_nb, extract_nb): New functions.
4658 (SC_MASK): Mask out SA and LK bits.
4659 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4660 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4661 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4662 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4663 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4664 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4665 (powerpc_macros): Define table of macro definitions.
4666 (powerpc_num_macros): Define.
4668 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4669 if PPC_OPERAND_NEXT is set.
4671 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4673 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4674 char. Retrieve contents using bfd_getl32 instead of shifting.
4676 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4678 * ppc-opc.c: New file. Opcode table for PowerPC, including
4679 opcodes for POWER (RS/6000).
4680 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4681 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4682 (CFILES): Add ppc-dis.c.
4683 (ppc-dis.o, ppc-opc.o): New targets.
4684 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4686 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4688 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4689 No space before 'u', 'f', or 'N'.
4691 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4693 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4694 farther than we should.
4696 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4698 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4700 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4702 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4704 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4705 needs it, to prevent reading past the end of a section.
4707 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4709 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4710 Removed t,A case for la; always use t,A(b) case.
4712 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4714 From Ted Lemen <mellon@pepper.ncd.com>
4715 * mips-dis.c (print_insn_arg): Handle 'k'.
4716 * mips-opc.c: Make cache use k, not t.
4718 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4720 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4721 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4722 FLOAT_FORMAT_CODE to put out floating point register names.
4724 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4726 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4728 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4730 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4732 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4734 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4735 larger than 32. Moved dsxx32 variants first for disassembler.
4737 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4739 * z8kgen.c, z8k-opc.h: Add full lda information.
4741 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4743 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4744 movb instructions. Any necessary space will be emitted by
4745 the code to handle nullification completers.
4747 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4749 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4751 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4753 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4754 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4756 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4758 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4760 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4762 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4763 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4765 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4767 * m88k-dis.c (m88kdis): comment change. Remove space after
4769 (printop): handle new arg types DEC and XREG for m88110.
4771 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4773 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4774 type for absolute branch addresses. Delete special
4775 "ble" and "be" code in 'W' operand code.
4777 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4779 * mips-opc.c: Set hazard information correctly for branch
4780 likely instructions.
4782 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4784 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4785 info->fprintf_func for printing and info->print_address_func for
4788 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4790 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4792 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4794 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4795 Corrected second case of "b" for disassembler.
4797 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4799 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4800 to BFD swapping routines to correspond to BFD name changes.
4802 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4804 * mips-opc.c: Change div machine instruction to be z,s,t rather
4805 than s,t. Change div macro to be d,v,t rather than d,s,t.
4806 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4807 rem and remu which generates only the corresponding div
4808 instruction. This is for compatibility with the MIPS assembler,
4809 which only generates the simple machine instruction when an
4810 explicit destination of $0 is used.
4811 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4813 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4815 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4816 WR_31 hazard for bal, bgezal, bltzal.
4818 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4820 * hppa-dis.c (print_insn_hppa): Use print function
4821 from within the disassemble_info, not fprintf_filtered.
4823 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4825 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4826 Law, law@cs.utah.edu.)
4828 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * mips-opc.c ("absu"): Removed.
4833 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4835 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4836 Changed hazard information to distinguish between memory load
4837 delays and coprocessor load delays.
4839 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4841 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4843 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4845 * configure.in: Don't pass cpu to config.bfd.
4847 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4849 * m88k-dis.c (m88kdis): Make class unsigned.
4851 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4853 * alpha-dis.c (print_insn_alpha): One branch format case was
4854 missing the instruction name.
4856 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4858 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4859 Add the arch-specific auxiliary files.
4860 (OFILES): Remove the arch-specific auxiliary files
4861 and use BFD_MACHINES instead of DIS_LIBS.
4862 * configure.in: Set BFD_MACHINES based on --with-targets option.
4864 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4866 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4869 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4871 * sparc-opc.c: Change CONST to const to deal with gcc
4872 -Dconst=__const -traditional.
4874 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4876 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4877 coprocessor instructions out of #if 0, and made them use new
4880 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4882 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4884 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4886 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4887 instruction, for use by the disassembler.
4889 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4890 hand-coded sign extensions that depended on 32-bit host ints.
4891 FIXME, we still depend on big-endian host bitfield ordering.
4892 (sparc_print_insn): Set the insn_info_valid field, and the
4893 other fields that describe the instruction being printed.
4895 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4897 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4898 `jmp' instead of just one of them.
4900 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4902 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4903 (fput_fp_reg_r): Renamed from fput_reg_r.
4904 (fput_fp_reg): New function.
4905 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4907 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4909 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4911 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4913 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4915 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4916 don't output a space.
4918 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4920 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4922 * mips-opc.c: New file, containing opcode table from
4923 ../include/opcode/mips.h.
4924 * Makefile.in: Add it.
4926 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4928 * m88k-dis.c: New file, moved in from gdb and changed to use the
4929 new dis-asm.h disassembler interface.
4930 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4931 (m88k-dis.o): New target.
4933 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4935 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4936 argument string const char * to correspond to opcode/mips.h.
4938 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4940 * mips-dis.c: Updated to account for name changes in new version
4942 * Makefile.in: Added header file dependencies.
4944 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4946 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4948 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4950 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4951 extend, rather than shifts.
4953 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4955 * Makefile.in: Undo 15 June change.
4957 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4959 * m68k-dis.c (print_insn_arg): Change return value to byte count
4961 * m68k-dis.c: Re-write to detect invalid operands before
4962 printing anything, so we can handle this the same way we
4963 handle invalid opcodes.
4965 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4967 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4969 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4971 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4974 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4976 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4978 * configure.in: Do make sysdep.h link.
4979 * Makefile.in: Search ../include. Don't search ../bfd.
4981 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4983 Changes from Jeff Law, law@cs.utah.edu:
4984 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4985 Do not print a space before the completers specified by
4988 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4990 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4991 defined, since gdb has been fixed.
4993 Changes from Jeff Law, law@cs.utah.edu:
4994 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4995 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4996 be a *disassemble_info, not a *FILE.
4997 * hppa-dis.c: Support 'd', '!', and 'a'.
4998 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4999 * hppa-dis.c: Delete cases which are no longer needed.
5001 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5003 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5005 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5007 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5010 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5012 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5013 * configure.in: No longer need to configure to get sysdep.h.
5015 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5017 * Patches from Jeffrey Law <law@cs.utah.edu>.
5018 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5019 templates for 1.1 FP computational instructions.
5021 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5023 * h8500-dis.c (print_insn_h8500): Address argument is type
5025 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5028 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5029 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5031 * sparc-dis.c (compare_opcodes): Move static declaration to
5034 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5036 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5037 instruction, remove unimp hack from 'l' argument.
5039 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5041 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5044 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5046 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5047 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5050 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5052 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5053 arrays of string pointers to 2-d arrays of chars, to save
5056 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5058 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5059 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5061 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5063 * hppa-dis.c: New file from Utah, adapted to new disassembler
5065 * Makefile.in: Include it.
5067 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5069 * sh-dis.c, sh-opc.h: New files.
5071 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5073 * alpha-dis.c, alpha-opc.h: New files.
5075 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5077 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5080 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5082 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5084 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5086 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5089 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5091 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5092 and double percent signs a few places.
5094 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5096 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5097 Use info->print_address_func not print_address.
5099 * dis-buf.c (generic_print_address): New function.
5101 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5103 * Makefile.in: Add sparc-dis.c.
5104 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5106 Add `add' instruction to the set that get checked
5107 for a preceding `sethi' in order to print an absolute address.
5108 * (print_insn): Disassembly prefers real instructions.
5109 (is_delayed_branch): Speed up.
5110 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5111 Still missing some float ops, and needs testing.
5112 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5113 F_ALIAS. Use printf, not fprintf, when not passing a file
5115 (compare_opcodes): Check that identical instructions have
5116 identical opcodes, complain otherwise.
5119 * Include reg_names.
5121 Use dis-asm.h/read_memory_func interface.
5123 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5125 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5126 deliberately return non-zero to setjmp from longjmp. Otherwise
5127 this code fails to compile.
5129 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5131 * m68k-dis.c: Fix prototype for fetch_arg().
5133 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5135 * dis-buf.c: New file, for new read_memory_func interface.
5136 Makefile.in (OFILES): Include it.
5137 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5138 Use new read_memory_func interface.
5140 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5142 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5143 * h8500-opc.h: Fix couple of opcodes.
5145 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5147 * Makefile.in: add dvi & installcheck targets
5149 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5151 * Makefile.in: Update for h8500-dis.c.
5153 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5155 * h8500-dis.c, h8500-opc.h: New files
5157 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5159 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5160 ../include/dis-asm.h.
5161 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5162 and ../gdb/m68k-pinsn.c).
5163 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5164 and ../gdb/i386-pinsn.c).
5165 * m68881-ext.c: New file. Moved definition of
5166 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5167 * Makefile.in: Adjust for new files.
5168 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5169 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5170 can be dis-assembled.
5172 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5174 * mips-dis.c (print_insn_arg): Now returns void.
5176 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5178 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5179 files that use the macros.
5181 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5183 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5184 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5185 (CFILES): Added mips-dis.c.
5187 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5189 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5190 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5192 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5194 * Makefile.in: Improve *clean rules.
5195 * configure.in: Allow a default host.
5197 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5199 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5200 files include other sysdep files
5202 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5204 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5206 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5208 * configure.in: For host support, use ../bfd/configure.host
5209 so it stays in sync with the ../bfd/hosts database.
5211 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5213 * configure.in: use cpu-vendor-os triple instead of nested cases
5215 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5217 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5218 *always* the wrong one.
5220 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5222 * z8kgen.c: added copyright info
5224 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5226 * z8k-dis.c (unparse_instr): prettier tabs
5227 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5229 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5231 * configure.in: Add ncr* configuration.
5232 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5233 picayune ANSI compilers happy.
5235 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5237 * configure.in (i386): Make i386 and i486 synonymous for now.
5238 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5240 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5242 * Makefile.in (install): Fix typo.
5244 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5246 * Makefile.in (make): Remove obsolete crud.
5247 (sparc-opc.o): Avoid Sun Make VPATH bug.
5249 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5251 * Makefile.in: since there are no SUBDIRS, remove rule and
5252 references of subdir_do.
5254 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5256 * Makefile.in (install): Get the library name right here too.
5257 Don't install bfd.h, since it's unrelated to this library. No
5258 subdirs to recurse into, either.
5259 (CFILES): The source file has a .c suffix, not .o.
5261 * sparc-opc.c: New file, moved from BFD.
5262 * Makefile.in (OFILES): Build it.
5264 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5266 * z8k-dis.c: fixed forward refferences of some declarations.
5268 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5270 * Makefile.in: get the name of the library right
5272 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5274 * z8k-dis.c: knows how to disassemble z8k stuff
5275 * z8k-opc.h: new file full of z8000 opcodes
5279 version-control: never
projects / external / binutils.git / blob