2 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
4 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
7 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
9 * configure: Rebuilt with latest devo autoconf for NT support.
11 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
13 * v850-dis.c (disassemble): Use curly brace syntax for register
16 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
17 where r0 is being used as a destination register.
20 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
22 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
26 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
28 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
29 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
30 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
31 Add insns to access SGR and DBR.
32 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
35 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
37 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
39 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
41 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
43 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
48 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
50 * configure (cgen_files): Add support for v850e target.
51 * configure.in (cgen_files): Add support for v850e target.
55 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
57 * configure (cgen_files): Add support for v850eq target.
58 * configure.in (cgen_files): Add support for v850eq target.
61 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
63 * configure.in (bfd_arc_arch): Add.
65 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
66 * Makefile.in: Rebuild.
67 * arc-dis.c, arc-opc.c: New files.
68 * disassemble.c (ARCH_all): Define ARCH_arc.
69 (disassembler): Add ARC support.
72 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
75 * .Sanitize (Do-first): Add support for keep-v850eq command line
78 * v850-dis.c (disassemble): Add support for v850EQ instructions.
80 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
81 (v850_opcodes): Add v850EQ instructions.
84 * .Sanitize (Do-first): Add support for keep-v850e command line
87 * v850-dis.c (disassemble): Add support for v850E instructions.
89 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
90 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
91 insert_spe, extract_spe): New Functions.
92 (v850_opcodes): Add v850E instructions.
95 * v850-opc.c: Reorganised and re-layed out to improve readability
100 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
102 * configure: Rebuild with autoconf 2.12.1.
104 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
106 * aclocal.m4, configure: Rebuild with new automake patches.
108 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
110 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
111 * acinclude.m4: Just include acinclude.m4 from BFD.
112 * aclocal.m4, configure: Rebuild.
114 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
116 * Makefile.am: New file, based on old Makefile.in.
117 * acconfig.h: New file.
118 * acinclude.m4: New file.
119 * stamp-h.in: New file.
120 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
121 Removed shared library handling; now handled by libtool. Replace
122 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
123 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
124 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
125 handling in AC_OUTPUT.
126 * dep-in.sed: Change .o to .lo.
127 * Makefile.in: Now built with automake.
128 * aclocal.m4: Now built with aclocal.
129 * config.in, configure: Rebuild.
131 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
133 * mips-opc.c: Fix typo/thinko in "eret" instruction.
136 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
138 * mips-opc.c: Fix coding of mtsa.
141 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
143 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
145 * sparc-dis.c (sorted_opcodes): New static local.
146 (struct opcode_hash): `opcode' is pointer to const element.
147 (build_hash): First arg is now table of sorted pointers.
148 (print_insn_sparc): Sort opcodes by sorting table of pointers.
149 (compare_opcodes): Update.
151 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
153 * cgen-opc.c: #include <ctype.h>.
154 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
155 Handle case insensitive hashing.
156 (hash_keyword_value): Change type of `value' to unsigned int.
158 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
160 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
161 precision FP, mark it as such. Likewise for double precision
162 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
165 (mips_builtin_opcodes): Remove non-existant r5900 instructions
169 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
171 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
172 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
175 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
177 * ppc-opc.c (extract_nsi): make unsigned expression signed before
179 (UNUSED): remove one level of parens, so MSVC doesn't choke on
180 nesting depth when all the macros are expanded.
182 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
184 * sparc-opc.c: The fcmp v9a instructions take an integer register
185 as a destination, not a floating point register. From Christian
186 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
188 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
190 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
191 syntax. From Roman Hodek
192 <rnhodek@faui22c.informatik.uni-erlangen.de>.
194 * i386-dis.c (twobyte_has_modrm): Fix pand.
196 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
198 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
200 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
202 * arm-dis.c: Add prototypes for arm_decode_shift and
205 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
207 * mips-opc.c: Add r3900 insns.
209 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
211 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
212 print delay slot instructions on the same line. When using a PC
213 relative load, add a comment with the value being loaded if it can
216 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
218 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
219 to pushS/popS for segment regs and byte constant so that
220 pushw/popw printed when in 16 bit data mode.
222 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
223 print cbtw, cwtd in 16 bit data mode.
224 * i386-dis.c (putop): extra case W to support above.
226 * i386-dis.c (print_insn_x86): print addr32 prefix when given
227 address size prefix in 16 bit address mode.
229 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
231 * sh-dis.c: Reindent. Rename local variable fprintf to
234 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
236 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
238 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
240 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
242 * mips16-opc.c (mip16_opcodes): same.
244 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
246 * m68k-opc.c (moveb): Change $d to %d.
248 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
250 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
251 (twobyte_has_modrm): Likewise.
253 (OP_MMX, OP_EM, OP_MS): New static functions.
255 * i386-dis.c: Revert patch of April 4. The output now matches
258 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
260 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
263 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
265 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
267 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
269 * Makefile.in (install): Depend upon installdirs.
270 (installdirs): New target.
272 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
274 From Thomas Graichen <graichen@rzpd.de>:
275 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
276 * configure: Rebuild.
278 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
280 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
281 Delete string{,s}.h support.
283 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
285 * cgen-asm.c (cgen_parse_operand_fn): New global.
286 (cgen_parse_{{,un}signed_integer,address}): Update call to
287 cgen_parse_operand_fn.
288 (cgen_init_parse_operand): New function.
289 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
290 from cgen_asm_init_parse.
291 (m32r_cgen_assemble_insn): New operand `errmsg'.
292 Delete call to as_bad, return error message to caller.
293 (m32r_cgen_asm_hash_keywords): #if 0 out.
295 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
297 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
299 [case 'J']: Fix typo in register name.
301 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
303 * configure.in: Substitute SHLIB_LIBS.
304 * configure: Rebuild.
305 * Makefile.in (SHLIB_LIBS): New variable.
306 ($(SHLIB)): Use $(SHLIB_LIBS).
308 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
310 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
312 * cgen-opc.c (hash_keyword_name): Improve algorithm.
314 * disassemble.c (disassembler): Handle m32r.
316 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
318 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
319 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
320 * Makefile.in (CFILES): Add them.
321 (ALL_MACHINES): Add them.
322 (dependencies): Regenerate.
323 * configure.in (cgen_files): New variable.
324 (bfd_m32r_arch): Add entry.
325 * configure: Regenerate.
327 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
329 * configure.in: Correct file names for bfd_mn10[23]00_arch.
330 * configure: Rebuild.
332 * Makefile.in: Rebuild dependencies.
334 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
336 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
339 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
341 * Branched binutils 2.8.
343 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
345 * m10200-dis.c: Rename from mn10200-dis.c.
346 * m10200-opc.c: Rename from mn10200-opc.c.
347 * m10300-dis.c: Rename from mn10300-dis.c
348 * m10300-opc.c: Rename from mn10300-opc.c.
349 * Makefile.in: Update accordingly.
351 * mips16-opc.c: Add mul and dmul macros.
353 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
355 * makefile.vms: Update CFLAGS, add clean target.
357 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
359 * mips-opc.c: Add "wait". From Ralf Baechle
360 <ralf@gnu.ai.mit.edu>.
362 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
363 * configure, config.in: Rebuild.
364 * sysdep.h: Include <stdlib.h> if it exists.
365 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
367 * Makefile.in: Rebuild dependencies.
369 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
371 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
372 Andrew Bray <andy@madhouse.demon.co.uk>.
374 * mips-opc.c: Add cast when setting mips_opcodes.
377 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
379 * v850-dis.c (disassemble): Fix sign extension problem.
380 * v850-opc.c (extract_d*): Fix sign extension problems to make
381 disassembly calculate branch offsets correctly.
384 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
386 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
388 * mips-opc.c: Add dctr and dctw.
391 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
393 * d30v-dis.c (print_insn): Change the way signed constants
396 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
398 * Makefile.in (BFD_H): New variable.
399 (HFILES): New variable.
400 (CFILES): Add all C files.
401 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
402 Delete old dependencies, and build new ones.
403 * dep-in.sed: New file.
405 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
407 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
409 start-sanitize-coldfire
410 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
412 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
415 end-sanitize-coldfire
416 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
418 * mn10200-opc.c: Change "trap" to "syscall".
419 * mn10300-opc.c: Add new "syscall" instruction.
421 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
423 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
424 mulul insns on the coldfire.
426 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
428 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
429 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
430 (print_insn_little_arm): Likewise.
432 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
434 Based on patches from H.J. Lu <hjl@lucon.org>:
435 * i386-dis.c (fetch_data): Add prototype.
436 * m68k-dis.c (fetch_data): Add prototype.
437 (dummy_print_address): Add prototype. Make static.
438 * ppc-opc.c (valid_bo): Add prototype.
439 * sparc-dis.c (build_hash_table): Add prototype.
440 (is_delayed_branch, compute_arch_mask): Add prototypes.
441 (print_insn_sparc): Make several local variables const.
442 (compare_opcodes): Change arguments to const PTR. Add prototype.
443 * sparc-opc.c (arg): Change name field to be const.
444 (lookup_name, lookup_value): Add prototypes. Change table and
445 name parameters to be const.
446 (sparc_encode_asi): Change name parameter to be const.
447 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
448 (sparc_encode_sparclet_cpreg): Likewise.
449 (sparc_decode_asi): Change return type to be const.
450 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
451 (sparc_decode_sparclet_cpreg): Likewise.
453 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
455 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
456 Solaris doesn't like the combined options, and the -f is
458 (stamp-tshlink, install): Likewise.
460 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
462 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
465 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
467 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
469 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
471 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
474 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
476 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
479 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
481 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
483 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
485 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
488 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
490 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
491 floatformat_to_double to make portable.
492 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
495 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
497 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
498 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
500 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
502 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
503 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
506 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
508 * tic80-opc.c (LSI_SCALED): Renamed from this ...
509 (OFF_SL_BR_SCALED): ... to this, and added the flag
510 TIC80_OPERAND_BASEREL to the flags word.
511 (tic80_opcodes): Replace all occurances of LSI_SCALED with
515 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
517 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
518 Change mips_opcodes from const array to a pointer,
519 and change bfd_mips_num_opcodes from const int to int,
520 so that we can increase the size of the mips opcodes table
524 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
526 * tic80-opc.c (tic80_predefined_symbols): Revert change to
527 store BITNUM values in the table in one's complement form
528 to match behavior when assembler is given a raw numeric
529 value for a BITNUM operand.
530 * tic80-dis.c (print_operand_bitnum): Ditto.
534 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
536 * d30v-opc.c: Removed references to FLAG_X.
539 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
541 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
544 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
546 * Makefile.in: Added d30v object files.
547 * configure: (bfd_d30v_arch) Rebuilt.
548 * configure.in: (bfd_d30v_arch) Added new case.
549 * d30v-dis.c: New file.
550 * d30v-opc.c: New file.
551 * disassemble.c (disassembler) Add entry for d30v.
555 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
557 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
558 representations for the floating point BITNUM values.
560 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
562 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
563 in the table in one's complement form, as they appear in the
565 (tic80_symbol_to_value): Use macros to access predefined
567 (tic80_value_to_symbol): Ditto.
568 (tic80_next_predefined_symbol): New function.
569 * tic80-dis.c (print_operand_bitnum): Remove code that did
570 one's complement for BITNUM values.
574 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
576 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
579 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
581 * makefile.vms: Remove 8 bit characters. Update to latest
584 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
586 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
588 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
590 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
591 (IMM24_PCREL): Likewise.
593 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
595 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
596 address for an extended PC relative instruction that is not a
599 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
601 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
605 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
607 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
608 (tic80_opcodes): Sort entries so that long immediate forms
609 come after short immediate forms, making it easier for
610 assembler to select the right one for a given operand.
613 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
615 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
617 (print_insn_mips16): Likewise.
620 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
622 * mips-opc.c: add r5900.
626 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
628 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
629 a symbol class that restricts translation to just that
630 class (general register, condition code, etc).
632 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
634 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
635 and REG_DEST_E for register operands that have to be
636 an even numbered register. Add REG_FPA for operands that
637 are one of the floating point accumulator registers.
638 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
639 (tic80_opcodes): Change entries that need even numbered
640 register operands to use the new operand table entries.
641 Add "or" entries that are identical to "or.tt" entries.
644 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
646 * mips16-opc.c: Add new cases of exit instruction for
648 * mips-dis.c (print_mips16_insn_arg): Display floating point
649 registers in operands of exit instruction. Print `$' before
650 register names in operands of entry and exit instructions.
653 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
655 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
656 pairs for all predefined symbols recognized by the assembler.
657 Also used by the disassembling routines.
658 (tic80_symbol_to_value): New function.
659 (tic80_value_to_symbol): New function.
660 * tic80-dis.c (print_operand_control_register,
661 print_operand_condition_code, print_operand_bitnum):
662 Remove private tables and use tic80_value_to_symbol function.
665 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
667 * d10v-dis.c (print_operand): Change address printing
668 to correctly handle PC wrapping. Fixes PR11490.
670 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
672 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
675 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
677 * mips-dis.c (print_insn_mips16): Set insn_info information.
678 (print_mips16_insn_arg): Likewise.
680 * mips-dis.c (print_insn_mips16): Better handling of an extend
681 opcode followed by an instruction which can not be extended.
683 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
685 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
686 coldfire moveb instruction to not allow an address register as
687 destination. Although the documentation does not indicate that
688 this is invalid, experiments uncovered unexpected behavior.
689 Added a comment explaining the situation. Thanks to Andreas
690 Schwab for pointing this out to me.
693 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
695 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
696 entries are presorted so that entries with the same mnemonic are
697 adjacent to each other in the table. Sort the entries for each
698 instruction so that this is true.
701 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
703 * m68k-dis.c: Include <libiberty.h>.
704 (print_insn_m68k): Sort the opcode table on the most significant
705 nibble of the opcode.
708 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
710 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
711 "vsub", "vst", "xnor", and "xor" instructions.
712 (V_a1): Renamed from V_a, msb of accumulator reg number.
713 (V_a0): Add macro, lsb of accumulator reg number.
715 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
717 * tic80-dis.c (print_insn_tic80): Broke excessively long
718 function up into several smaller ones and arranged for
719 the instruction printing function to be callable recursively
720 to print vector instructions that have both a load and a
721 math instruction packed into a single opcode.
722 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
723 to explain why it comes after the other vector opcodes.
726 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
728 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
729 move insns to handle immediate operands.
731 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
733 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
734 fix operand mask in the "moveml" entries for the coldfire.
737 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
739 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
740 New macros for building vector instruction opcodes.
741 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
742 FMT_LI, which were unused. The field is now a flags field.
743 Remove some opcodes that are possible, but illegal, such
744 as long immediate instructions with doubles for immediate
745 values. Add "vadd" and "vld" instructions.
747 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
749 * tic80-opc.c (tic80_operands): Reorder some table entries to make
750 the order more logical. Move the shift alias instructions ("rotl",
751 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
752 interspersed with the regular sr.x and sl.x instructions. Add
753 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
754 "sub", "subu", "swcr", and "trap".
756 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
758 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
759 (OFF_SL_PC): Renamed from OFF_SL.
760 (OFF_SS_BR): New operand type for base relative operand.
761 (OFF_SL_BR): New operand type for base relative operand.
762 (REG_BASE): New operand type for base register operand.
763 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
764 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
765 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
767 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
768 10 char field, padded with spaces on rhs, rather than a string
769 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
770 than old TIC80_OPERAND_RELATIVE. Add support for new
771 TIC80_OPERAND_BASEREL flag bit.
773 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
775 * tic80-dis.c (print_insn_tic80): Print floating point operands
777 * tic80-opc.c (SPFI): Add single precision floating point
778 immediate operand type.
779 (ROTATE): Add rotate operand type for shifts.
780 (ENDMASK): Add for shifts.
781 (n): Macro for the 'n' bit.
782 (i): Macro for the 'i' bit.
783 (PD): Macro for the 'PD' field.
784 (P2): Macro for the 'P2' field.
785 (P1): Macro for the 'P1' field.
786 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
790 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
792 * mn10200-dis.c (disassemble): Mask off unwanted bits after
793 adding in current address for pc-relative operands.
796 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
798 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
799 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
800 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
801 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
802 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
803 REG_BASE_M_SI, REG_BASE_M_LI respectively.
804 (REG_SCALED, LSI_SCALED): New operand types.
805 (E): New macro for 'E' bit at bit 27.
806 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
807 opcodes, including the various size flavors (b,h,w,d) for
808 the direct load and store instructions.
810 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
812 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
814 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
815 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
816 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
817 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
818 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
819 masks with "MASK_* & ~M_*" to get the M bit reset.
820 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
822 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
824 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
825 correctly. Add support for printing TIC80_OPERAND_BITNUM and
826 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
828 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
829 CC, SICR, and LICR table entries.
830 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
831 "bcnd", and "brcr" opcodes.
834 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
836 * ppc-opc.c (powerpc_operands): Make comment match the
837 actual fields (no shift field).
838 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
840 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
841 partial implementation, work in progress.
842 * tic80-opc.c (tic80_operands): Begin construction operands table.
843 (tic80_opcodes): Continue populating opcodes table and start
844 filling in the operand indices.
845 (tic80_num_opcodes): Add this.
848 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
850 * m68k-opc.c: Add #B case for moveq.
852 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
854 * mn10300-dis.c (disassemble): Make sure all variables are initialized
855 before they are used.
858 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
860 * v850-opc.c (v850_opcodes): Put curly-braces around operands
861 for "breakpoint" instruction.
864 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
866 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
867 (dep): Use ALL_CFLAGS rather than CFLAGS.
870 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
872 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
876 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
878 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
880 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
883 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
885 * mips16-opc.c: Add "abs".
888 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
890 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
891 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
892 (disassembler): Add bfd_arch_tic80 support to set disassemble
894 * tic80-dis.c (print_insn_tic80): Add stub.
896 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
898 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
899 * configure: Regenerate with autoconf.
900 * tic80-dis.c: Add file.
901 * tic80-opc.c: Add file.
904 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
906 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
908 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
910 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
911 (mn10200_opcodes): Use it for some logicals and btst insns.
912 Add "break" and "trap" instructions.
914 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
916 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
918 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
920 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
921 relative load or add now depends upon whether the instruction is
924 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
926 * mn10200-dis.c: Finish writing disassembler.
927 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
928 Fix mask for "jmp (an)".
930 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
931 handle endianness issues for mn10300.
933 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
935 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
937 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
938 instruction. Fix opcode field for "movb (imm24),dn".
940 * mn10200-opc.c (mn10200_operands): Fix insertion position
943 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
945 * mn10200-opc.c: Create mn10200 opcode table.
946 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
947 but moving along nicely.
949 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
951 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
953 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
955 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
956 specifiers for fmovem* instructions.
958 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
960 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
962 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
964 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
967 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
969 * mn10300-opc.c: Add some comments explaining the various
972 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
974 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
976 * m68k-dis.c (print_insn_arg): Handle new < and > operand
979 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
980 operand specifiers in fmovm* instructions.
982 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
984 * ppc-opc.c (insert_li): Give an error if the offset has the two
985 least significant bits set.
987 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
989 * mips-dis.c (print_insn_mips16): Separate the instruction from
990 the arguments with a tab, not a space.
992 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
994 * mn10300-dis.c (disasemble): Finish conversion to '$' as
997 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1000 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1002 * configure: Rebuild with autoconf 2.12.
1004 Add support for mips16 (16 bit MIPS implementation):
1005 * mips16-opc.c: New file.
1006 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1007 (mips16_reg_names): New static array.
1008 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1009 after seeing a 16 bit symbol.
1010 (print_insn_little_mips): Likewise.
1011 (print_insn_mips16): New static function.
1012 (print_mips16_insn_arg): New static function.
1013 * mips-opc.c: Add jalx instruction.
1014 * Makefile.in (mips16-opc.o): New target.
1015 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1016 * configure: Rebuild.
1018 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1020 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1021 operand specifiers in *save, *restore and movem* instructions.
1023 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1026 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1027 register operands for immediate arithmetic, not, neg, negx, and
1028 set according to condition instructions.
1030 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1031 specifier of the effective-address operand in immediate forms of
1032 arithmetic instructions. The specifier for the immediate operand
1033 notes how and where the constant will be stored.
1035 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1037 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1040 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1043 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1045 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1047 * mn10300-dis.c (disassemble): Handle register lists.
1049 * mn10300-opc.c: Fix handling of register list operand for
1050 "call", "ret", and "rets" instructions.
1052 * mn10300-dis.c (disassemble): Print PC-relative and memory
1053 addresses symbolically if possible.
1054 * mn10300-opc.c: Distinguish between absolute memory addresses,
1055 pc-relative offsets & random immediates.
1057 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1059 (disassemble): Handle SPLIT and EXTENDED operands.
1061 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1063 * mn10300-dis.c: Rough cut at printing some operands.
1065 * mn10300-dis.c: Start working on disassembler support.
1066 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1068 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1070 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1072 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1074 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1076 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1078 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1079 register argument is calls and jmp instructions.
1081 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1083 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1084 getx operand. Fix opcode for mulqu imm,dn.
1086 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1088 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1089 in MN10300_OPERAND_SPLIT operands for how many bits
1090 appear in the basic insn word. Add IMM32_HIGH24,
1091 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1092 (mn10300_opcodes): Use new operands as needed.
1094 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1095 for bset, bclr, btst instructions.
1096 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1098 * mn10300-opc.c (mn10300_operands): Remove many redundant
1099 operands. Update opcode table as appropriate.
1100 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1101 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1103 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1105 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1106 operands (for indexed load/stores). Fix bitpos for DI
1107 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1108 few instructions that insert immediates/displacements in the
1109 middle of the instruction. Add IMM8E for 8 bit immediate in
1110 the extended part of an instruction.
1111 (mn10300_operands): Use new opcodes as appropriate.
1113 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1115 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1116 sequential so the assembler never parallelizes it with
1119 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1121 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1122 a data/address register that appears in register field 0
1123 and register field 1.
1124 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1126 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1128 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1129 standard disassembly.
1131 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1132 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1133 Recategorize PALcode instructions.
1136 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1138 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1141 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1143 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1144 there are no operand types.
1147 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1149 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1151 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1154 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1156 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1159 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1161 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1162 and sst.w instructions.
1164 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1168 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1170 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1173 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1175 * ppc-opc.c (PPCPWR2): Define.
1176 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1179 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1181 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1182 field for movhu instruction.
1185 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1186 cast value to "long" not "signed long" to keep hpux10
1190 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1192 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1195 * mn10300-opc.c (FMT*): Remove definitions.
1197 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1198 for shift-by-register opcodes.
1200 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1201 into [AD][MN][01] for encoding the position of the register
1204 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1206 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1207 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1209 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1211 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1212 Fix various typos. Add "PAREN" operand.
1213 (MEM, MEM2): Define.
1214 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1215 operands. Fix several typos.
1217 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1220 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1222 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1223 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1225 (mn10300_opcodes): Break opcode format out into its own field.
1226 Update many operand fields to deal with signed vs unsigned
1227 issues. Fix one or two typos in the "mov" instruction
1228 opcode, mask and/or operand fields.
1230 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1232 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1233 m68851 wasn't reset.
1235 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1237 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1238 all opcodes. Very rough cut at operands for all opcodes.
1240 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1243 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1245 * mn10200-opc.c, mn10300-opc.c: New files.
1246 * mn10200-dis.c, mn10300-dis.c: New files.
1247 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1248 * disassemble.c: Break mn10x00 support into 10200 and 10300
1250 * configure.in: Likewise.
1251 * configure: Rebuilt.
1253 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1255 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1257 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1259 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1261 * disassemble (ARCH_mn10x00): Define.
1262 (disassembler): Handle bfd_arch_mn10x00.
1263 * configure.in: Recognize bfd_mn10x00_arch.
1264 * configure: Rebuilt.
1266 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1268 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1269 accordingly. Don't declare functions using op_rtn.
1272 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1274 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1275 params to be more standard.
1276 * (disassemble): Print absolute addresses and symbolic names for
1277 branch and jump targets.
1278 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1280 * (v850_opcodes): Add breakpoint insn.
1283 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1285 * m68k-opc.c: Move the fmovemx data register cases before the
1286 other cases, so that they get recognized before the data register
1287 does gets treated as a degenerate register list.
1289 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1291 * mips-opc.c: Add a case for "div" and "divu" with two registers
1292 and a destination of $0.
1294 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1296 * mips-dis.c (print_insn_arg): Add prototype.
1297 (_print_insn_mips): Ditto.
1299 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1301 * mips-dis.c (print_insn_arg): Print condition code registers as
1304 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1306 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1309 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1311 * v850-dis.c (disassemble): Make static. Provide prototype.
1313 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1315 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1318 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1320 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1321 ']' characters into the output stream.
1322 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1323 Add "memop" field to all opcodes (for the disassembler).
1324 Reorder opcodes so that "nop" comes before "mov" and "jr"
1325 comes before "jarl".
1327 * v850-dis.c (print_insn_v850): Fix typo in last change.
1329 * v850-dis.c (print_insn_v850): Properly handle disassembling
1330 a two byte insn at the end of a memory region when the memory
1331 region's size is only two byte aligned.
1333 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1335 * v850-dis.c (v850_reg_names): Define.
1336 (v850_sreg_names, v850_cc_names): Likewise.
1337 (disassemble): Very rough cut at printing operands (unformatted).
1339 * v850-opc.c (BOP_MASK): Fix.
1340 (v850_opcodes): Fix mask for jarl and jr.
1342 * v850-dis.c: New file. Skeleton for disassembler support.
1343 * Makefile.in Remove v850 references, they're not needed here
1344 and they weren't being sanitized away.
1345 * configure.in: Add v850-dis.o when building v850 toolchains.
1346 * configure: Rebuilt.
1347 * disassemble.c (disassembler): Call v850 disassembler.
1349 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1350 (insert_d8_6, extract_d8_6): New functions.
1351 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1352 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1354 (IF4A, IF4B): Use "D7" instead of "D7S".
1355 (IF4C, IF4D): Use "D8_7" instead of "D8".
1356 (IF4E, IF4F): New. Use "D8_6".
1357 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1358 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1360 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1361 (v850_operands): Change D16 to D16_15, use special insert/extract
1362 routines. New new D16 that uses the generic insert/extract code.
1363 (IF7A, IF7B): Use D16_15.
1364 (IF7C, IF7D): New. Use D16.
1365 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1367 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1368 message. Issue an error if the branch offset is odd.
1370 * v850-opc.c: Add notes about needing special insert/extract
1371 for all the load/store insns, except "ld.b" and "st.b".
1373 * v850-opc.c (insert_d22, extract_d22): New functions.
1374 (v850_operands): Use insert_d22 and extract_d22 for
1376 (insert_d9): Fix range check.
1378 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1380 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1381 and set bits field to D9 and D22 operands.
1383 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1385 * v850-opc.c (v850_operands): Define SR2 operand.
1386 (v850_opcodes): "ldsr" uses R1,SR2.
1388 * v850-opc.c (v850_opcodes): Fix opcode specs for
1389 sld.w, sst.b, sst.h, sst.w, and nop.
1391 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1393 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1394 end of the opcode table.
1397 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1399 * d10v-opc.c (pre_defined_registers): Added register pairs,
1400 "r0-r1", "r2-r3", etc.
1403 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1405 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1406 Create I16U for an unsigned 16bit mmediate operand.
1407 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1409 * v850-opc.c (v850_operands): Define EP operand.
1410 (IF4A, IF4B, IF4C, IF4D): Use EP.
1412 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1413 with immediate operand, "movhi". Tweak "ldsr".
1415 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1416 correct. Get sld.[bhw] and sst.[bhw] closer.
1418 * v850-opc.c (v850_operands): "not" is a two byte insn
1420 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1422 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1424 * v850-opc.c (two): Get order of words correct.
1426 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1428 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1429 register source and destination operands.
1430 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1432 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1433 same thinko in "trap" opcode.
1435 * v850-opc.c (v850_opcodes): Add initializer for size field
1438 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1439 Add D8 for 8-bit unsigned field in short load/store insns.
1440 (IF4A, IF4D): These both need two registers.
1441 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1442 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1443 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1444 for "ldsr" and "stsr".
1445 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1448 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1449 short store word (sst.w).
1451 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1453 * v850-opc.c (v850_operands): Added insert and extract fields,
1454 pointers to functions that handle unusual operand encodings.
1456 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1458 * v850-opc.c (v850_opcodes): Enable "trap".
1460 * v850-opc.c (v850_opcodes): Fix order of displacement
1461 and register for "set1", "clr1", "not1", and "tst1".
1463 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1465 * v850-opc.c (v850_operands): Add "B3" support.
1466 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1469 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1471 * v850-opc.c: Close unterminated comment.
1473 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1475 * v850-opc.c (v850_operands): Add flags field.
1476 (v850_opcodes): add move opcodes.
1478 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1480 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1481 * configure: (bfd_v850v_arch) Add new case.
1482 * configure.in: (bfd_v850_arch) Add new case.
1483 * v850-opc.c: New file.
1486 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1488 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1490 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1492 * d10v-opc.c: Add additional information to the opcode
1493 table to help determinine which instructions can be done
1496 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1498 * mpw-make.sed: Update editing of include pathnames to be
1501 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1503 * arm-opc.h: Added "bx" instruction definition.
1505 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1507 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1509 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1511 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1513 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1515 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1517 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1519 * makefile.vms: Update for alpha-opc changes.
1521 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1523 * i386-dis.c (print_insn_i386): Actually return the correct value.
1524 (ONE, OP_ONE): #ifdef out; not used.
1526 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1528 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1529 Changed subi operand type to treat 0 as 16.
1531 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1533 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1536 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1538 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1539 memory transfer instructions. Add new format string entries %h and %s.
1540 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1543 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1545 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1546 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1548 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1550 * alpha-dis.c (print_insn_alpha_osf): Remove.
1551 (print_insn_alpha_vms): Remove.
1552 (print_insn_alpha): Make globally visible. Chose the register
1553 names based on info->flavour.
1554 * disassemble.c: Always return print_insn_alpha for the alpha.
1556 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1558 * d10v-dis.c (dis_long): Handle unknown opcodes.
1560 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1562 * d10v-opc.c: Changes to support signed and unsigned numbers.
1563 All instructions with the same name that have long and short forms
1564 now end in ".l" or ".s". Divs added.
1565 * d10v-dis.c: Changes to support signed and unsigned numbers.
1567 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1569 * d10v-dis.c: Change all functions to use info->print_address_func.
1571 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1573 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1574 move ccr/sr insns more strict so that the disassembler only
1575 selects them when the addressing mode is data register.
1577 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1578 * d10v-opc.c (pre_defined_registers): Declare.
1579 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1580 to pick a better name for the registers.
1582 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1584 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1585 operands for fexpand and fpmerge. From Christian Kuehnke
1586 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1588 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1590 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1591 print routine. Take new regnames and cpumask arguments.
1592 Kill the environment variable nonsense.
1593 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1594 (print_insn_alpha_vms): New function. Do VMS style regnames.
1595 * disassemble.c (disassembler): Test bfd flavour to pick
1596 between OSF and VMS routines. Default to OSF.
1598 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1600 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1601 * configure: Rebuild.
1602 * Makefile.in (install): Use @INSTALL_SHLIB@.
1604 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1606 * configure: (bfd_d10v_arch) Add new case.
1607 * configure.in: (bfd_d10v_arch) Add new case.
1608 * d10v-dis.c: New file.
1609 * d10v-opc.c: New file.
1610 * disassemble.c (disassembler) Add entry for d10v.
1612 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1614 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1615 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1617 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1619 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1620 distinguish between variants of the instruction set.
1621 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1622 distinguish between variants of the instruction set.
1624 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1626 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1627 the 8086 instruction set.
1628 * i386-dis.c: General cleanups. Make most things static. Add
1629 prototypes. Get rid of static variables aflags and dflags. Pass
1630 them as args (to almost everything).
1632 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1634 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1636 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1638 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1639 if the next arg is marked with SRC_IN_DST. Gross.
1641 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1642 we're looking for and find EXR.
1644 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1645 if we're looking for KBIT and we don't find it.
1647 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1650 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1651 3bit immediate operands.
1653 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1655 * Released binutils 2.7.
1657 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1658 <kkaempf@progis.ac-net.de>.
1660 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1662 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1664 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1666 * sparc-dis.c (print_insn_sparclite): New routine to print
1667 sparclite instructions.
1669 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1671 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1673 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1675 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1676 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1677 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1679 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1681 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1682 Use autoconf-set values.
1683 (docdir, oldincludedir): Removed.
1684 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1686 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1688 * alpha-opc.c: New file.
1689 * alpha-opc.h: Remove.
1690 * alpha-dis.c: Complete rewrite to use new opcode table.
1691 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1692 * configure: Rebuild with autoconf 2.10.
1693 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1694 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1696 (alpha-opc.o): New target.
1698 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1700 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1701 Set imm_added_to_rs1 even if the source and destination register
1704 * sparc-opc.c: Add some two operand forms of the wr instruction.
1706 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1708 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1711 * disassemble.c (disassembler): Handle H8/S.
1712 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1714 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1716 * sparc-opc.c: Add beq/teq as aliases for be/te.
1718 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1719 <sergei@msil.sps.mot.com>.
1721 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1723 * makefile.vms: New file.
1725 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1727 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1729 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1732 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1734 * i386-dis.c (OP_OFF): Call append_prefix.
1736 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1738 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1739 unsigned long to silence a warning from the Solaris PowerPC
1742 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1744 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1746 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1748 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1750 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1751 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1752 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1753 cpush, cpusha, cpull sparclet insns.
1755 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1757 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1759 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1761 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1762 Set F_FLOAT on other floating point instructions.
1764 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1766 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1768 (powerpc_opcodes): Add 860/821 specific SPRs.
1770 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1772 * configure.in: Permit --enable-shared to specify a list of
1773 directories. Set and substitute BFD_PICLIST.
1774 * configure: Rebuild.
1775 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1776 uses. Set to @BFD_PICLIST@.
1778 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1780 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1781 not "abs", which may be needed for the absolute in something
1782 like btst #0,@10:8. Print L_3 immediates separately from other
1783 immediates. Change ABSMOV reference to ABS8MEM.
1785 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1787 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1788 (current_arch_mask): New static global.
1789 (compute_arch_mask): New static function.
1790 (print_insn_sparc): Delete sparc_v9_p. New static local
1791 current_mach. Resort opcode table if current_mach changes.
1792 Generalize "insn not supported" test.
1793 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1794 Delete test for v9/!v9.
1795 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1797 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1798 (brfcx): Renamed to FBRX.
1799 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1800 coprocessor mnemonics are not supported on the sparclet).
1801 (condf): Renamed to CONDF.
1802 (SLCBCC2): Delete F_ALIAS flag.
1804 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1806 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1807 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1809 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1811 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1812 that the shared library version number is set correctly.
1814 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1816 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1817 Miles Bader <miles@gnu.ai.mit.edu>.
1818 * configure: Rebuild.
1820 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1822 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1825 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1827 * configure: Rebuild with autoconf 2.8.
1829 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1831 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1832 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1834 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1836 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1837 since they appear as targets in Makefile.in.
1838 * configure: Rebuild.
1840 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1842 * mpw-make.sed: Edit out shared library support bits.
1844 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1846 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1847 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1848 (sparc_opcodes): Add sparclet insns.
1849 (sparclet_cpreg_table): New static local.
1850 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1851 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1853 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1855 * i386-dis.c (index16): New static variable.
1856 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1858 (OP_indirE): Return result of OP_E.
1859 (OP_E): Check for 16 bit addressing mode, and disassemble
1860 correctly. Optimised 32 bit case a little. Don't print
1861 "(base,index,scale)" when sib specifies only an offset.
1863 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1865 * configure.in: Set and substitute SHLIB_DEP.
1866 * configure: Rebuild.
1867 * Makefile.in (SHLIB_DEP): New variable.
1868 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1869 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1870 COMMON_SHLIB, add them to piclist with appropriate modifications.
1871 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1872 here: just use piclist.
1874 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1876 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1877 (print_insn_sparc): Rewrite v9/not-v9 tests.
1878 (compare_opcodes): Likewise.
1879 * sparc-opc.c (MASK_<ARCH>): Define.
1880 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1881 (sparclet,v6notv9): Define.
1882 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1883 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1885 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1887 * configure.in: Call AC_PROG_CC before configure.host.
1888 * configure: Rebuild.
1890 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1892 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1894 * i386-dis.c (onebyte_has_modrm): New static array.
1895 (twobyte_has_modrm): New static array.
1896 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1898 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1900 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1903 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1905 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1908 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1910 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1911 m68010up, not just m68020up | cpu32.
1913 * Makefile.in (SONAME): New variable.
1914 ($(SHLINK)): Make a link to the transformed name, as well.
1915 (stamp-tshlink): New target.
1916 (install): Skip stamp-tshlink during install.
1918 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1920 * configure.in: Call AC_ARG_PROGRAM.
1921 * configure: Rebuild.
1922 * Makefile.in (program_transform_name): New variable.
1923 (install): Transform library name before installing it.
1925 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1927 * i960-dis.c (mem): Add HX dcinva instruction.
1929 Support for building as a shared library, based on patches from
1930 Alan Modra <alan@spri.levels.unisa.edu.au>:
1931 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1932 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1933 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1934 * configure: Rebuild.
1935 * Makefile.in (ALLLIBS): New variable.
1936 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1937 (COMMON_SHLIB, SHLINK): New variables.
1938 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1939 (STAGESTUFF): Remove variable.
1940 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1941 (stamp-piclist, piclist): New targets.
1942 ($(SHLIB), $(SHLINK)): New targets.
1943 ($(OFILES)): Depend upon stamp-picdir.
1944 (disassemble.o): Build twice if PICFLAG is set.
1945 (MOSTLYCLEAN): Add pic/*.o.
1946 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1947 (distclean): Remove pic and stamp-picdir.
1948 (install): Install shared libraries.
1949 (stamp-picdir): New target.
1951 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1953 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1954 Print unknown instruction as "unknown", rather than in hex.
1956 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1958 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1960 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1962 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1964 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1966 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1967 when necessary. From Ulrich Drepper
1968 <drepper@myware.rz.uni-karlsruhe.de>.
1970 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1972 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1973 sparc_num_opcodes. Update architecture enum values.
1974 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1975 (sparc_opcode_lookup_arch): New function.
1976 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1977 (sparc_opcodes): Add v9a shutdown insn.
1979 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1981 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1982 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1984 (print_insn_sparc64): Deleted.
1985 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1988 * sparc-opc.c (architecture_pname): Add v9a.
1990 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1992 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1993 incorrectly defined as 0x16 when it should be 0x15.
1994 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1995 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1996 excb (exception barrier) which is defined in the Alpha
1997 Architecture Handbook version 2.
1998 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1999 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2000 disassembled as or, for example.
2002 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2004 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2005 (_print_insn_mips): Change i from int to unsigned int.
2007 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2009 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2010 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2012 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2014 * i386-dis.c: Added Pentium Pro instructions.
2016 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2018 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2021 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2023 * sh-opc.h (sh_nibble_type): Added REG_B.
2024 (sh_arg_type): Added A_REG_B.
2025 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2027 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2029 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2031 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2033 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2035 * Makefile.in (distclean): Remove stamp-h. From Ronald
2036 F. Guilmette <rfg@monkeys.com>.
2038 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2040 From David Mosberger-Tang <davidm@azstarnet.com>:
2041 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2044 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2046 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2047 (sh_table): Added many SH3 opcodes.
2048 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2050 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2052 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2053 (subco,subco.): Mark this PPC, not PPCCOM.
2055 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2057 * configure: Rebuild with autoconf 2.7.
2059 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2061 * configure: Rebuild with autoconf 2.6.
2063 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2065 * configure.in: Sort list of architectures. Accept but do nothing
2066 for alliant, convex, pyramid, romp, and tahoe.
2068 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2070 * a29k-dis.c (print_special): Change num to unsigned int.
2072 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2074 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2077 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2079 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2080 * configure: Rebuilt.
2082 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2084 * configure.in: Add case for bfd_i860_arch.
2085 * configure: Rebuild.
2087 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2089 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2090 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2091 (NEXTDOUBLE): Likewise.
2092 (print_insn_m68k): Don't match fmoveml if there is more than one
2093 register in the list.
2094 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2096 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2098 * m68k-opc.c: Use #W rather than #w.
2099 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2101 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2103 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2104 and likewise for all the dbxx opcodes.
2106 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2108 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2110 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2112 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2113 the VR4100 specific instructions to the mips_opcodes structure.
2115 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2117 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2118 ugly Metrowerks bug in CW6, is fixed in CW7.
2120 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2122 * ppc-opc.c (whole file): Add flags for common/any support.
2124 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2126 * Makefile.in (BISON): Remove macro.
2127 (FLAGS_TO_PASS): Remove BISON.
2129 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2131 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2133 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2134 instructions that take no args by looking at the match mask.
2135 (print_insn_arg): Always print "%" before register names.
2136 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2137 [case '_']: Don't print "@#" before address.
2138 [case 'J']: Use "%s" as format string, not register name.
2139 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2141 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2143 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2146 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2148 From David Mosberger-Tang <davidm@azstarnet.com>
2150 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2151 (alpha_insn_set): added definitions for VAX floating point
2152 instructions (Unix compilers don't generate these, but handcoded
2153 assembly might still use them).
2155 * alpha-dis.c (print_insn_alpha): added support for disassembling
2156 the miscellaneous instructions in the Alpha instruction set.
2158 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2160 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2161 no longer create sysdep.h, sed ppc-opc.c to work around a
2162 serious Metrowerks C bug.
2163 * mpw-make.in: Remove.
2164 * mpw-make.sed: New file, used by mpw-configure to edit
2165 Makefile.in into an MPW makefile.
2167 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2169 * Makefile.in (maintainer-clean): New synonym for realclean.
2171 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2173 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2174 which use '0', '1', and '2' instead. Specify the proper size for
2175 a pmove immediate operand. Correct the pmovefd patterns to be
2176 moves to a register, not from a register.
2177 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2179 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2181 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2182 %psr, %wim, %tbr as F_NOTV9.
2184 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2186 * Makefile.in (Makefile): Just rebuild Makefile when running
2188 (config.h, stamp-h): New targets.
2189 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2190 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2191 rebuilding config.h.
2192 * configure: Rebuild.
2194 * mips-opc.c: Change unaligned loads and stores with "t,A"
2195 operands to use "t,A(b)".
2197 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2199 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2201 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2203 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2204 until 3 instead of until 2.
2206 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2208 * Makefile.in (ALL_CFLAGS): Define.
2209 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2210 (MOSTLYCLEAN): Add config.log.
2211 (distclean): Don't remove config.log.
2212 * configure.in: Substitute HDEFINES.
2213 * configure: Rebuild.
2215 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2217 * sh-opc.h (sh_arg_type): Add F_FR0.
2218 (sh_table, case fmac): Add F_FR0 as first argument.
2220 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2222 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2224 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2226 * sparc-dis.c: Remove all references to NO_V9.
2228 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2230 * aclocal.m4: Just include ../bfd/aclocal.m4.
2231 * configure: Rebuild.
2233 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2235 * sparc-dis.c (X_DISP19): Define.
2236 (print_insn, case 'G'): Use it.
2237 (print_insn, case 'L'): Sign extend displacement.
2239 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2241 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2242 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2243 host_makefile_frag or frags.
2244 * aclocal.m4: New file.
2245 * configure: Rebuild.
2246 * Makefile.in (INSTALL): Set to @INSTALL@.
2247 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2248 (INSTALL_DATA): Set to @INSTALL_DATA@.
2250 (AR_FLAGS): Set to rc rather than qc.
2251 (CC): Define as @CC@.
2252 (CFLAGS): Set to @CFLAGS@.
2253 (@host_makefile_frag@): Remove.
2254 (config.status): Remove dependency upon @frags@.
2256 * configure.in: ../bfd/config.bfd now just sets shell variables.
2257 Use them rather than looking through target Makefile fragments.
2258 * configure: Rebuild.
2260 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2262 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2264 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2266 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2267 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2270 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2271 (lookup_{name,value}): New functions.
2272 (prefetch_table): New static local.
2273 (sparc_{encode,decode}_prefetch): New functions.
2274 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2276 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2278 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2281 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2283 * sh-dis.c: Correct comment on first line of file.
2285 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2287 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2289 * sparc-opc.c (asi, membar): New static locals.
2290 (sparc_{encode,decode}_{asi,membar}): New functions.
2291 (sparc_opcodes, membar insn): Fix.
2292 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2293 Support decoding of membar masks.
2296 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2298 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2300 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2302 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2303 and likewise for the other branches. Add bhs as an alias for bcc,
2304 and likewise for the size variants. Add dbhs as an alias for
2307 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2309 * sh-opc.h (FP sts instructions): Update to match reality.
2311 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2313 * m68k-dis.c: (fpcr_names): Add % before all register names.
2314 (reg_names): Likewise.
2315 (print_insn_arg): Don't explicitly print % before register names.
2316 Add % before register names in static array names. In case 'r',
2317 print data registers as `@(Dn)', not `Dn@'. When printing a
2318 memory address, don't print @# before it.
2319 (print_indexed): Change base_disp and outer_disp from int to
2320 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2321 syntax. Sign extend 8 byte displacement correctly.
2322 (print_base): Print using MIT syntax. Print zpc when appropriate.
2323 Change parameter disp from int to bfd_vma.
2325 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2328 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2330 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2331 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2332 * sh-opc.h (sh_arg_type): Add new operand types.
2333 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2335 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2337 * Makefile.in (distclean): Remove generated file config.h.
2339 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2341 * Makefile.in (distclean): Remove generated file config.h.
2343 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2345 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2347 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2349 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2350 rather than numopcodes. Use m68k_opcodes rather than removed
2351 opcode function. Don't check F_ALIAS.
2352 (print_insn_arg): Change first parameter to be const char *.
2353 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2354 (m68k-opc.o): New target.
2355 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2356 * configure: Rebuild.
2358 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2360 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2361 (opcode_bits, opcode_hash_table): New variables.
2362 (opcodes_initialized): Renamed from opcodes_sorted.
2363 (build_hash_table): New function.
2364 (is_delayed_branch): Use hash table.
2365 (print_insn): Renamed from print_insn_sparc, made static.
2366 Build and use hash table. If !sparc64, ignore sparc64 insns,
2367 and vice-versa if sparc64.
2368 (print_insn_sparc, print_insn_sparc64): New functions.
2369 (compare_opcodes): Move sparc64 opcodes to end.
2370 Print commutative insns with constant second.
2371 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2373 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2375 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2376 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2377 avoids printing a delay slot in a delay slot.
2378 * sh-opc.h (sh_table): Fully bracket last entry.
2380 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2382 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2384 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2386 * configure.in: Get host_makefile_frag from ${srcdir}.
2388 * configure.in: Autoconfiscated. Check for string[s].h. Create
2389 config.h from config.in. Don't set up sysdep.h link.
2390 * sysdep.h: New file.
2391 * configure, config.in: New files, generated from configure.in.
2392 * Makefile.in: Updated to be processed autoconf-style.
2393 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2394 (Makefile): Depend on config.status.
2395 (config.status): New rule.
2396 * configure.bat: Update Makefile substitutions.
2398 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2400 * mips-opc.c (L1): Define.
2401 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2402 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2405 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2407 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2408 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2409 have multiple add units but only a single logical unit.
2411 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2412 shifted by 18, without any insertion or extraction function.
2413 (insert_cr, extract_cr): Remove.
2415 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2417 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2420 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2422 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2423 * sh-opc.h: Add copyright.
2425 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2427 * Makefile.in (crunch-m68k): Delete extra target accidentally
2428 checked in a while ago.
2430 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2432 * sh-opc.h (sh_table): Add SH3 support.
2434 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2436 * sh-opc.h: Added bsrf and braf.
2438 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2440 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2441 bogus [ls]fm{ea,fd} patterns.
2443 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2444 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2445 initialize it from memory. Make function static.
2446 (print_insn_{big,little}_arm): New functions.
2447 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2448 the correct endianness.
2450 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2452 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2455 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2457 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2458 17th, so that it builds again using GCC as the compiler.
2460 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2462 * mips-dis.c (print_insn_little_mips): Cast return value from
2463 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2464 expects an unsigned long, and that might be fewer words of
2465 argument storage (e.g., if bfd_vma is long long on a 32-bit
2467 (print_insn_big_mips): Likewise with bfd_getb32 value.
2468 (_print_insn_mips): Now static.
2470 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2472 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2473 gcc memory hog problem with initializer is fixed.
2475 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2477 Merge in support for Mac MPW as a host.
2478 (Old change descriptions retained for informational value.)
2480 * mpw-config.in (archname): Compute from the config.
2481 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2483 * mpw-config.in (target_arch): Compute from canonical target.
2484 (m68k, mips, powerpc, sparc): Add architectures.
2485 * mpw-make.in (disassemble.c.o): Add.
2486 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2488 * mpw-config.in (BFD_MACHINES): Set to a default value.
2489 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2491 * mpw-make.in (CSEARCH): Add extra-include to search path.
2493 * mpw-config.in (varargs.h): Don't create.
2494 (sysdep.h): Create using forward-include.
2495 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2497 * mpw-config.in: New file, MPW version of configure.in.
2498 * mpw-make.in: New file, MPW version of Makefile.in.
2500 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2502 * alpha-dis.c (print_insn_alpha): Put empty statement after
2505 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2507 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2508 (low_sign_extend): Likewise.
2509 (get_field): Delete unused function.
2510 (set_field, deposit_14, deposit_21): Likewise.
2512 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2514 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2517 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2519 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2521 * alpha-opc.h (OSF_ASMCODE): define
2522 print pal-code names as defined in App C of the
2523 Alpha Architecture Reference Manual
2525 * alpha-dis.c: cleaned up output
2526 print stylized code forms as defined in App A.4.3 of the
2527 Alpha Architecture Reference Manual
2529 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2531 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2533 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2536 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2538 * m68k-dis.c (opcode): New function. Returns address of opcode
2539 table entry given index, even if the opcode table was split to
2540 work around gcc bugs.
2541 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2543 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2544 (reg_names): Now const.
2545 (print_insn_arg): Arrays cacheFieldName and names now const.
2546 (print_indexed): Array scales now const.
2548 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2550 * ppc-opc.c: Sort recently added instructions by minor opcode
2551 number within major opcode number.
2553 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2555 * hppa-dis.c: Include libhppa.h.
2557 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2559 * mips-opc.c: Change dli to use M_DLI, and add dla.
2561 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2563 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2565 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2567 * mips-opc.c: Add r4650 mul instruction.
2569 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2571 * mips-opc.c: Add uld and usd macros for unaligned double load and
2574 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2576 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2577 mfdcr, mtdcr, icbt, iccci.
2579 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2581 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2582 signed char fields to shorts, more portable.
2584 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2586 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2587 char fields as signed chars, since they may have negative values.
2589 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2591 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2592 (mycroft@netbsd.org).
2594 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2596 From "Logg, Ed" <elogg@ea.com>:
2597 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2598 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2601 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2603 * ppc-opc.c: Changes based on patch from David Edelsohn
2604 <edelsohn@mhpcc.edu>.
2605 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2608 (insert_tbr): New static function.
2609 (extract_tbr): New static function.
2610 (XFXFXM_MASK, XFXM): Define.
2611 (XSPRBAT_MASK, XSPRG_MASK): Define.
2612 (powerpc_opcodes): Add instructions to access special registers by
2613 name. Add mtcr and mftbu.
2615 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2617 * mips-opc.c (P3): Define.
2618 (mips_opcodes): Add mad and madu.
2620 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2622 * configure.in: Add W65 support.
2623 * disassemble.c: Likewise.
2624 * w65-opc.h, w65-dis.c: New files.
2626 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2628 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2631 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2633 * mips-opc.c: Add dli as a synonym for li.
2635 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2637 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2638 print something for reserved opcode values, even if it won't
2641 * mips-dis.c (_print_insn_mips): When initializing, shift right
2642 and mask, to avoid sign extension problems on the Alpha.
2644 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2647 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2649 * sh-opc.h (mov.l gbr): Get direction right.
2650 * sh-dis.c (print_insn_shx): New function.
2651 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2652 print opcodes with right byte order.
2654 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2656 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2657 to avoid conflicts with getopt.
2659 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2661 * hppa-dis.c (print_insn_hppa): Read the instruction using
2662 bfd_getb32, so that it works on a little endian or 64 bit host.
2663 Remove unused local variable op.
2665 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2667 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2668 addu does not work correctly if -mips3.
2670 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2672 * a29k-dis.c (print_special): Add special register names defined
2673 on 29030, 29040 and 29050.
2674 (print_insn): Handle new operand type 'I'.
2676 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2678 * Makefile.in (INSTALL): Use top level install.sh script.
2680 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2682 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2683 that it works on a little endian host.
2685 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2687 * configure.in: Use ${config_shell} when running config.bfd.
2689 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2691 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2693 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2695 * a29k-dis.c (print_insn): Print the opcode.
2697 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2699 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2701 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2703 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2705 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2707 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2708 which store a value into memory.
2710 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2712 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2713 * arm-dis.c, arm-opc.h: New files.
2715 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2717 * Makefile.in (ns32k-dis.o): Add dependency.
2718 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2719 string, not as array of chars.
2721 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2723 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2725 * sparc-opc.c: Added sparclite extended FP operations, and
2726 versions of v9 impdep* instructions permitting specification of
2729 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2731 * i960-dis.c (reg_names): Now const.
2732 (struct sparse_tabent): New type, copied from array type in mem
2734 (ctrl): Local static array ctrl_tab now const.
2735 (cobr): Local static array cobr_tab now const.
2736 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2737 static variable mem_tab no longer explicitly initialized. Changed
2738 mem_init to const array of struct sparse_tabent.
2739 (reg): Local static variable reg_tab no longer explicitly
2740 initialized. Changed reg_init to const array of struct
2742 (ea): Local static array scale_tab now const.
2744 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2747 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2749 * configure.bat: the disassember needs to be enabled for
2750 "objdump -d" to work in djgpp.
2752 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2754 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2755 (invalid_float): Enabled general version, doesn't require running
2756 on ns32k host. Changed to take char* argument, and test for
2757 explicitly specified sizes, instead of using sizeof() on host CPU
2759 (INVALID_FLOAT): Cast first argument.
2760 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2761 list_P032, list_M032): Now const.
2762 (optlist, list_search): Made appropriate arguments now point to
2764 (print_insn_arg): Changed static array of one-character-string
2765 pointers into a static const array of characters; fixed sprintf
2766 statement accordingly.
2768 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2770 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2771 from distribution. A ns32k-dis.c from a previous distribution has
2772 been brought up to date and supports the new interface.
2774 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2776 * configure.in: add bfd_ns32k_arch target support.
2778 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2779 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2781 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2783 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2786 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2788 * h8300-dis.c, mips-dis.c: Don't use true and false.
2790 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2792 * configure.in: Change --with-targets to --enable-targets.
2794 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2796 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2797 opcodes to the first instruction with that opcode, to speed
2798 disassembly of large files. From ralphc@pyramid.com (Ralph
2801 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2803 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2805 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2807 * configure.bat: update to latest makefile.in
2809 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2811 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2812 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2813 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2814 slot insn is in a delay slot.
2815 * z8k-opc.h: (resflg): Fix patterns.
2816 * h8500-opc.h Fix CR insn patterns.
2818 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2820 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2821 "cmpl" before POWER versions, so that gas -many uses them.
2823 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2825 * disassemble.c: New file.
2826 * Makefile.in (OFILES): Add disassemble.o.
2827 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2828 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2829 binutils/configure.in.
2831 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2832 opcode being examined.
2834 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2836 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2837 (insert_ral, insert_ram, insert_ras): New functions.
2838 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2839 RAS for store with update.
2841 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2843 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2844 (edelsohn@npac.syr.edu).
2846 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2848 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2851 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2853 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2855 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2857 * ppc-opc.c (powerpc_operands): The signedp field has been
2858 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2859 instead. Add new operand SISIGNOPT.
2860 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2861 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2862 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2865 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2867 * i386-dis.c (struct private): Renamed to dis_private. `private'
2868 is a reserved word for dynix cc.
2870 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2872 * configure.in: Change error message to refer to bfd/config.bfd
2873 rather than bfd/configure.in.
2875 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2877 * ppc-opc.c: Define POWER2 as short alias flag.
2878 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2881 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2883 * i960-dis.c (print_insn_i960): Don't read a second word for
2884 opcodes 0, 1, 2 and 3.
2886 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2888 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2890 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2892 * m68881-ext.c: Removed; no longer used.
2893 * Makefile.in: Changed accordingly.
2895 * m68k-dis.c (ext_format_68881): Don't declare.
2896 (print_insn_m68k): If an instruction uses place 'i', it uses at
2897 least four fixed bytes.
2898 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2899 extended float, convert to double using floatformat_to_double, not
2900 ieee_extended_to_double, and fetch the data before converting it.
2902 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2904 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2905 davidj@ICSI.Berkeley.EDU (David Johnson).
2907 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2909 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2910 PowerPC uses bdnz[l][a].
2912 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2914 * dis-buf.c, i386-dis.c: Include sysdep.h.
2916 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2918 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2920 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2921 by Motorola PowerPC 601 with PPC_OPCODE_601.
2922 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2923 Disassemble Motorola PowerPC 601 instructions as well as normal
2924 PowerPC instructions.
2926 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2928 * i960-dis.c (reg, mem): Just use a static array instead of
2931 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2933 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2934 condition name index if this is for a negated condition.
2936 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2937 Floating point format for 'H' operand is backwards from normal
2938 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2939 operands (fmpyadd and fmpysub), handle bizarre register
2940 translation correctly for single precision format.
2942 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2943 or 'I' operands if the next format specifier is 'M' (fcmp
2944 condition completer).
2946 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2948 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2949 single number giving a bitmask for the MB and ME fields of an M
2950 form instruction. Change NB to accept 32, and turn it into 0;
2951 also turn 0 into 32 when disassembling. Seperated SH from NB.
2952 (insert_mbe, extract_mbe): New functions.
2953 (insert_nb, extract_nb): New functions.
2954 (SC_MASK): Mask out SA and LK bits.
2955 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2956 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2957 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2958 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2959 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2960 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2961 (powerpc_macros): Define table of macro definitions.
2962 (powerpc_num_macros): Define.
2964 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2965 if PPC_OPERAND_NEXT is set.
2967 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2969 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2970 char. Retrieve contents using bfd_getl32 instead of shifting.
2972 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2974 * ppc-opc.c: New file. Opcode table for PowerPC, including
2975 opcodes for POWER (RS/6000).
2976 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2977 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2978 (CFILES): Add ppc-dis.c.
2979 (ppc-dis.o, ppc-opc.o): New targets.
2980 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2982 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2984 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2985 No space before 'u', 'f', or 'N'.
2987 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2989 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2990 farther than we should.
2992 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2994 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2996 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2998 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3000 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3001 needs it, to prevent reading past the end of a section.
3003 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3005 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3006 Removed t,A case for la; always use t,A(b) case.
3008 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3010 From Ted Lemen <mellon@pepper.ncd.com>
3011 * mips-dis.c (print_insn_arg): Handle 'k'.
3012 * mips-opc.c: Make cache use k, not t.
3014 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3016 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3017 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3018 FLOAT_FORMAT_CODE to put out floating point register names.
3020 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3022 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3024 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3026 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3028 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3030 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3031 larger than 32. Moved dsxx32 variants first for disassembler.
3033 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3035 * z8kgen.c, z8k-opc.h: Add full lda information.
3037 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3039 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3040 movb instructions. Any necessary space will be emitted by
3041 the code to handle nullification completers.
3043 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3045 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3047 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3049 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3050 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3052 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3054 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3056 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3058 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3059 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3061 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3063 * m88k-dis.c (m88kdis): comment change. Remove space after
3065 (printop): handle new arg types DEC and XREG for m88110.
3067 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3069 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3070 type for absolute branch addresses. Delete special
3071 "ble" and "be" code in 'W' operand code.
3073 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3075 * mips-opc.c: Set hazard information correctly for branch
3076 likely instructions.
3078 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3080 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3081 info->fprintf_func for printing and info->print_address_func for
3084 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3086 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3088 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3090 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3091 Corrected second case of "b" for disassembler.
3093 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3095 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3096 to BFD swapping routines to correspond to BFD name changes.
3098 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3100 * mips-opc.c: Change div machine instruction to be z,s,t rather
3101 than s,t. Change div macro to be d,v,t rather than d,s,t.
3102 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3103 rem and remu which generates only the corresponding div
3104 instruction. This is for compatibility with the MIPS assembler,
3105 which only generates the simple machine instruction when an
3106 explicit destination of $0 is used.
3107 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3109 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3111 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3112 WR_31 hazard for bal, bgezal, bltzal.
3114 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3116 * hppa-dis.c (print_insn_hppa): Use print function
3117 from within the disassemble_info, not fprintf_filtered.
3119 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3121 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3122 Law, law@cs.utah.edu.)
3124 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3126 * mips-opc.c ("absu"): Removed.
3129 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3131 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3132 Changed hazard information to distinguish between memory load
3133 delays and coprocessor load delays.
3135 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3137 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3139 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3141 * configure.in: Don't pass cpu to config.bfd.
3143 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3145 * m88k-dis.c (m88kdis): Make class unsigned.
3147 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3149 * alpha-dis.c (print_insn_alpha): One branch format case was
3150 missing the instruction name.
3152 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3154 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3155 Add the arch-specific auxiliary files.
3156 (OFILES): Remove the arch-specific auxiliary files
3157 and use BFD_MACHINES instead of DIS_LIBS.
3158 * configure.in: Set BFD_MACHINES based on --with-targets option.
3160 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3162 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3165 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3167 * sparc-opc.c: Change CONST to const to deal with gcc
3168 -Dconst=__const -traditional.
3170 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3172 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3173 coprocessor instructions out of #if 0, and made them use new
3176 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3178 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3180 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3182 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3183 instruction, for use by the disassembler.
3185 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3186 hand-coded sign extensions that depended on 32-bit host ints.
3187 FIXME, we still depend on big-endian host bitfield ordering.
3188 (sparc_print_insn): Set the insn_info_valid field, and the
3189 other fields that describe the instruction being printed.
3191 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3193 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3194 `jmp' instead of just one of them.
3196 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3198 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3199 (fput_fp_reg_r): Renamed from fput_reg_r.
3200 (fput_fp_reg): New function.
3201 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3203 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3205 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3207 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3209 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3211 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3212 don't output a space.
3214 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3216 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3218 * mips-opc.c: New file, containing opcode table from
3219 ../include/opcode/mips.h.
3220 * Makefile.in: Add it.
3222 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3224 * m88k-dis.c: New file, moved in from gdb and changed to use the
3225 new dis-asm.h disassembler interface.
3226 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3227 (m88k-dis.o): New target.
3229 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3231 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3232 argument string const char * to correspond to opcode/mips.h.
3234 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3236 * mips-dis.c: Updated to account for name changes in new version
3238 * Makefile.in: Added header file dependencies.
3240 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3242 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3244 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3246 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3247 extend, rather than shifts.
3249 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3251 * Makefile.in: Undo 15 June change.
3253 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3255 * m68k-dis.c (print_insn_arg): Change return value to byte count
3257 * m68k-dis.c: Re-write to detect invalid operands before
3258 printing anything, so we can handle this the same way we
3259 handle invalid opcodes.
3261 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3263 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3265 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3267 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3270 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3272 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3274 * configure.in: Do make sysdep.h link.
3275 * Makefile.in: Search ../include. Don't search ../bfd.
3277 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3279 Changes from Jeff Law, law@cs.utah.edu:
3280 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3281 Do not print a space before the completers specified by
3284 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3286 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3287 defined, since gdb has been fixed.
3289 Changes from Jeff Law, law@cs.utah.edu:
3290 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3291 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3292 be a *disassemble_info, not a *FILE.
3293 * hppa-dis.c: Support 'd', '!', and 'a'.
3294 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3295 * hppa-dis.c: Delete cases which are no longer needed.
3297 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3299 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3301 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3303 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3306 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3308 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3309 * configure.in: No longer need to configure to get sysdep.h.
3311 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3313 * Patches from Jeffrey Law <law@cs.utah.edu>.
3314 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3315 templates for 1.1 FP computational instructions.
3317 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3319 * h8500-dis.c (print_insn_h8500): Address argument is type
3321 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3324 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3325 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3327 * sparc-dis.c (compare_opcodes): Move static declaration to
3330 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3332 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3333 instruction, remove unimp hack from 'l' argument.
3335 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3337 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3340 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3342 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3343 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3346 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3348 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3349 arrays of string pointers to 2-d arrays of chars, to save
3352 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3354 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3355 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3357 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3359 * hppa-dis.c: New file from Utah, adapted to new disassembler
3361 * Makefile.in: Include it.
3363 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3365 * sh-dis.c, sh-opc.h: New files.
3367 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3369 * alpha-dis.c, alpha-opc.h: New files.
3371 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3373 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3376 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3378 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3380 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3382 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3385 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3387 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3388 and double percent signs a few places.
3390 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3392 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3393 Use info->print_address_func not print_address.
3395 * dis-buf.c (generic_print_address): New function.
3397 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3399 * Makefile.in: Add sparc-dis.c.
3400 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3402 Add `add' instruction to the set that get checked
3403 for a preceding `sethi' in order to print an absolute address.
3404 * (print_insn): Disassembly prefers real instructions.
3405 (is_delayed_branch): Speed up.
3406 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3407 Still missing some float ops, and needs testing.
3408 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3409 F_ALIAS. Use printf, not fprintf, when not passing a file
3411 (compare_opcodes): Check that identical instructions have
3412 identical opcodes, complain otherwise.
3415 * Include reg_names.
3417 Use dis-asm.h/read_memory_func interface.
3419 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3421 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3422 deliberately return non-zero to setjmp from longjmp. Otherwise
3423 this code fails to compile.
3425 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3427 * m68k-dis.c: Fix prototype for fetch_arg().
3429 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3431 * dis-buf.c: New file, for new read_memory_func interface.
3432 Makefile.in (OFILES): Include it.
3433 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3434 Use new read_memory_func interface.
3436 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3438 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3439 * h8500-opc.h: Fix couple of opcodes.
3441 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3443 * Makefile.in: add dvi & installcheck targets
3445 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3447 * Makefile.in: Update for h8500-dis.c.
3449 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3451 * h8500-dis.c, h8500-opc.h: New files
3453 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3455 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3456 ../include/dis-asm.h.
3457 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3458 and ../gdb/m68k-pinsn.c).
3459 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3460 and ../gdb/i386-pinsn.c).
3461 * m68881-ext.c: New file. Moved definition of
3462 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3463 * Makefile.in: Adjust for new files.
3464 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3465 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3466 can be dis-assembled.
3468 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3470 * mips-dis.c (print_insn_arg): Now returns void.
3472 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3474 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3475 files that use the macros.
3477 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3479 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3480 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3481 (CFILES): Added mips-dis.c.
3483 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3485 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3486 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3488 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3490 * Makefile.in: Improve *clean rules.
3491 * configure.in: Allow a default host.
3493 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3495 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3496 files include other sysdep files
3498 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3500 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3502 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3504 * configure.in: For host support, use ../bfd/configure.host
3505 so it stays in sync with the ../bfd/hosts database.
3507 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3509 * configure.in: use cpu-vendor-os triple instead of nested cases
3511 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3513 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3514 *always* the wrong one.
3516 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3518 * z8kgen.c: added copyright info
3520 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3522 * z8k-dis.c (unparse_instr): prettier tabs
3523 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3525 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3527 * configure.in: Add ncr* configuration.
3528 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3529 picayune ANSI compilers happy.
3531 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3533 * configure.in (i386): Make i386 and i486 synonymous for now.
3534 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3536 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3538 * Makefile.in (install): Fix typo.
3540 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3542 * Makefile.in (make): Remove obsolete crud.
3543 (sparc-opc.o): Avoid Sun Make VPATH bug.
3545 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3547 * Makefile.in: since there are no SUBDIRS, remove rule and
3548 references of subdir_do.
3550 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3552 * Makefile.in (install): Get the library name right here too.
3553 Don't install bfd.h, since it's unrelated to this library. No
3554 subdirs to recurse into, either.
3555 (CFILES): The source file has a .c suffix, not .o.
3557 * sparc-opc.c: New file, moved from BFD.
3558 * Makefile.in (OFILES): Build it.
3560 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3562 * z8k-dis.c: fixed forward refferences of some declarations.
3564 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3566 * Makefile.in: get the name of the library right
3568 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3570 * z8k-dis.c: knows how to disassemble z8k stuff
3571 * z8k-opc.h: new file full of z8000 opcodes
3575 version-control: never