1 1999-06-07 Jakub Jelinek <jj@ultra.linux.cz>
3 * sparc-opc.c: Add aliases Solaris as supports.
5 Mon Jun 7 12:04:52 1999 Andreas Schwab <schwab@issan.cs.uni-dortmund.de>
7 * Makefile.am (CFILES): Add arc-{dis,opc}.c and v850-{dis,opc}.c.
8 * Makefile.in: Regenerated.
10 1999-06-03 Philip Blundell <philb@gnu.org>
12 * arm-dis.c (print_insn_arm): Make LDRH/LDRB consistent with LDR
13 when target is PC-relative.
15 1999-05-28 Linus Nordberg <linus.nordberg@canit.se>
17 * m68k-opc.c: Rename MACL/MSACL to MAC/MSAC. Add MACM/MSACM. Add
20 * m68k-dis.c (fetch_arg): Add places `n', `o'.
22 * m68k-opc.c: Add MSAC, MACL, MOVE to/from ACC, MACSR, MASK.
23 Add mcf5206e to appropriate instructions.
24 Add alias for MAC, MSAC.
26 * m68k-dis.c (print_insn_arg): Add formats `E', `G', `H' and place
29 * m68k-opc.c (m68k_opcodes): Add divsw, divsl, divuw, divul, macl,
30 macw, remsl, remul for mcf5307. Change mcf5200 --> mcf.
32 * m68k-dis.c: Add format `u' and places `h', `m', `M'.
34 1999-05-18 Alan Modra <alan@spri.levels.unisa.edu.au>
36 * i386-dis.c (Ed): Define.
37 (dis386_twobyte_att, dis386_twobyte_intel): Use Ed for movd.
39 (OP_rm): Rename to OP_Rd.
42 (putop): Add const to template and p.
43 (print_insn_x86): Delete.
44 (print_insn_i386): Merge old function print_insn_x86. Add const
46 (struct dis386): Add const to name.
47 (dis386_att, dis386_intel): Add const.
48 (dis386_twobyte_att, dis386_twobyte_intel): Add const.
49 (names32, names16, names8, names_seg, index16): Add const.
50 (grps, prefix_user_table, float_reg): Add const.
51 (float_mem_att, float_mem_intel): Add const.
52 (oappend): Add const to s.
53 (OP_REG): Add const to s.
54 (ptr_reg): Add const to s.
55 (dofloat): Add const to dp.
56 (OP_C): Don't skip modrm, it's now done in OP_Rd.
59 (OP_Rd): Check for valid mod. Call Op_E to print.
60 (OP_E): Handle d_mode arg. Check for bad sfence,lea,lds etc.
61 (OP_MS): Check for valid mod. Call Op_EM to print.
62 (OP_3DNowSuffix): Set obufp and use oappend rather than
63 strcat. Call BadOp() for errors.
64 (OP_SIMD_Suffix): Likewise.
65 (BadOp): New function.
67 1999-05-12 Alan Modra <alan@spri.levels.unisa.edu.au>
69 * i386-dis.c (dis386_intel): Remove macro chars, except for
70 jEcxz. Change cWtR and cRtd to cW and cR.
71 (dis386_twobyte_intel): Remove macro chars here too.
72 (putop): Handle R and W macros for intel mode.
74 * i386-dis.c (SIMD_Fixup): New function.
75 (dis386_twobyte_att): Use it on movlps and movhps, and change
76 Ev to EX on these insns. Change movmskps Ev, XM to Gv, EX.
77 (dis386_twobyte_intel): Same here.
79 * i386-dis.c (Av): Remove.
83 (OP_SIMD_Suffix): New function.
84 (OP_DIR): Remove dead code.
85 (eAX_reg..eDI_reg): Renumber.
86 (onebyte_has_modrm): Table numbering comments.
87 (INTERNAL_DISASSEMBLER_ERROR): Move to before print_insn_x86.
88 (print_insn_x86): Move all prefix oappends to after uses_f3_prefix
89 checks. Print error on invalid dp->bytemode2. Remove simd_cmp,
90 and handle SIMD cmp insns in OP_SIMD_Suffix.
91 (info->bytes_per_line): Bump from 5 to 6.
93 (OP_E): Use INTERNAL_DISASSEMBLER_ERROR. Handle sfence.
94 (OP_3DNowSuffix): Ensure mnemonic index unsigned.
96 PIII SIMD support from Doug Ledford <dledford@redhat.com>
97 * i386-dis.c (XM, EX, None): Define.
98 (OP_XMM, OP_EX, OP_None): New functions.
99 (USE_GROUPS, USE_PREFIX_USER_TABLE): Define.
100 (GRP14): Rename to GRPAMD.
101 (GRP*): Add USE_GROUPS flag.
103 (dis386_twobyte_att, dis386_twobyte_intel): Add SIMD insns.
104 (twobyte_has_modrm): Add SIMD entries.
105 (twobyte_uses_f3_prefix, simd_cmp_op, prefix_user_table): New.
106 (grps): Add SIMD insns.
107 (print_insn_x86): New vars uses_f3_prefix and simd_cmp. Don't
108 oappend repz if uses_f3_prefix. Add code to handle new groups for
111 From Maciej W. Rozycki <macro@ds2.pg.gda.pl>
112 * i386-dis.c (dis386_att, dis386_intel): Change 0xE8 call insn
113 operand from Av to Jv.
115 1999-05-07 Nick Clifton <nickc@cygnus.com>
117 * mcore-dis.c (print_insn_mcore): Use .short to display
118 unidentified instructions, not .word.
120 1999-04-26 Tom Tromey <tromey@cygnus.com>
122 * aclocal.m4, configure: Updated for new version of libtool.
124 1999-04-14 Doug Evans <devans@casey.cygnus.com>
126 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
127 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
129 Mon Apr 12 23:46:17 1999 Jeffrey A Law (law@cygnus.com)
131 * hppa-dis.c (print_insn_hppa, case '3'): New case for PA2.0
134 1999-04-10 Doug Evans <devans@casey.cygnus.com>
136 * fr30-desc.c,fr30-desc.h,fr30-ibld.c: Rebuild.
137 * m32r-desc.c,m32r-desc.h,m32r-opinst.c: Rebuild.
139 1999-04-06 Ian Lance Taylor <ian@zembu.com>
141 * opintl.h (LC_MESSAGES): Never define.
143 1999-04-04 Ian Lance Taylor <ian@zembu.com>
145 * i386-dis.c (intel_syntax, open_char, close_char): Make static.
146 (separator_char, scale_char): Likewise.
147 (print_insn_x86): Likewise.
148 (print_insn_i386): Likewise. Add declaration.
150 1999-03-26 Doug Evans <devans@casey.cygnus.com>
152 * fr30-dis.c: Rebuild.
153 * m32r-dis.c: Rebuild.
155 1999-03-23 Ian Lance Taylor <ian@zembu.com>
157 * m68k-opc.c: Change compare instructions to use "@s" rather than
158 ";s" when used with an immediate operand.
160 1999-03-22 Doug Evans <devans@casey.cygnus.com>
162 * cgen-opc.c (cgen_set_cpu): Delete.
163 (cgen_lookup_insn): max_insn_size renamed to max_insn_bitsize.
164 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c,fr30-opc.h:
166 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c,m32r-opc.h:
168 * po/opcodes.pot: Rebuild.
170 1999-03-16 Martin Hunt <hunt@cygnus.com>
172 * d30v-opc.c (mvtsys): Remove FLAG_LKR.
174 1999-03-11 Doug Evans <devans@casey.cygnus.com>
176 * cgen-opc.c (cgen_set_cpu): New arg `isa'. All callers updated.
177 (cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): New fns.
178 (cgen_get_insn_operands): Rewrite test for hardcoded/operand index.
179 * fr30-asm.c,fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c: Rebuild.
180 * m32r-asm.c,m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c: Rebuild.
181 * m32r-opinst.c: Rebuild.
183 1999-02-25 Doug Evans <devans@casey.cygnus.com>
185 * cgen-opc.c (cgen_hw_lookup_by_name): Rewrite.
186 (cgen_hw_lookup_by_num): Rewrite.
187 * fr30-desc.c,fr30-desc.h,fr30-dis.c,fr30-ibld.c,fr30-opc.c: Rebuild.
188 * m32r-desc.c,m32r-desc.h,m32r-dis.c,m32r-ibld.c,m32r-opc.c: Rebuild.
189 * m32r-opinst.c: Rebuild.
191 Sat Feb 13 14:06:19 1999 Richard Henderson <rth@cygnus.com>
193 * alpha-opc.c: Add sqrt+flags patterns. Add EV6 PALcode insns.
194 (insert_jhint): Fix insertion mask.
195 * alpha-dis.c (print_insn_alpha): Disassemble EV6 PALcode insns.
197 1999-02-10 Doug Evans <devans@casey.cygnus.com>
199 * Makefile.in: Rebuild.
201 1999-02-09 Doug Evans <devans@casey.cygnus.com>
203 * i960c-asm.c,i960c-dis.c,i960c-opc.c,i960c-opc.h: Delete.
204 * i960-dis.c (print_insn_i960): Rename from print_insn_i960_orig.
205 * Makefile.am: Remove references to them.
206 (HFILES): Add fr30-desc.h,m32r-desc.h.
207 (CFILES): Add fr30-desc.c,fr30-ibld.c,m32r-desc.c,m32r-ibld.c,
209 (ALL_MACHINES): Update.
210 * configure.in: Redo handling of cgen_files.
211 (bfd_i960_arch): Delete i960c-*.lo files.
212 * configure: Regenerate.
213 * cgen-asm.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
214 (hash_insn_array): Rewrite.
215 * cgen-dis.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
216 (hash_insn_array): Rewrite.
217 * cgen-opc.c (*): CGEN_OPCODE_DESC renamed to CGEN_CPU_DESC.
218 (cgen_lookup_insn,cgen_get_insn_operands): Define here.
219 (cgen_lookup_get_insn_operands): Ditto.
220 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
221 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
222 * po/POTFILES.in: Rebuild.
223 * po/opcodes.pot: Rebuild.
225 Fri Feb 5 00:04:24 1999 Ian Lance Taylor <ian@cygnus.com>
227 * Makefile.am: Rebuild dependencies.
228 (HFILES): Add fr30-opc.h.
229 (CFILES): Add fr30-asm.c, fr30-dis.c, fr30-opc.c.
230 * Makefile.in: Rebuild.
232 * configure.in: Change AC_PREREQ to 2.13. Remove AM_CYGWIN32.
233 Change AM_EXEEXT to AC_EXEEXT and AM_PROG_INSTALL to
235 * acconfig.h: Remove.
236 * configure: Rebuild with current autoconf/automake.
237 * aclocal.m4: Likewise.
238 * config.in: Likewise.
239 * Makefile.in: Likewise.
241 Thu Feb 4 13:48:52 1999 Ian Lance Taylor <ian@cygnus.com>
243 * m68k-opc.c: Correct move (not movew) to status word on 5200.
245 Mon Feb 1 20:54:36 1999 Catherine Moore <clm@cygnus.com>
247 * disassemble.c (disassembler): Handle bfd_mach_i386_i386_intel_syntax.
248 * i386-dis.c (x_mode): Define.
252 (dis386_twobyte): Remove.
253 (dis386_twobyte_att): New.
254 (dis386_twobyte_intel): New.
255 (print_insn_x86): Use new arrays.
257 (float_mem_intel): New.
258 (float_mem_att): New.
259 (dofloat): Use new float_mem arrays.
260 (print_insn_i386_att): New.
261 (print_insn_i386_intel): New.
262 (print_insn_i386): Handle bfd_mach_i386_i386_intel_syntax.
263 (putop): Handle intel syntax.
264 (OP_indirE): Handle intel syntax.
265 (OP_E): Handle intel syntax.
266 (OP_I): Handle intel syntax.
267 (OP_sI): Handle intel syntax.
268 (OP_OFF): Handle intel syntax.
272 1999-01-27 Doug Evans <devans@casey.cygnus.com>
274 * fr30-opc.h,fr30-opc.c: Rebuild.
275 * i960c-opc.h,i960c-opc.c: Rebuild.
276 * m32r-opc.c: Rebuild.
278 Tue Jan 19 18:01:54 1999 David Taylor <taylor@texas.cygnus.com>
280 * hppa-dis.c: revert HP merge changes until HP gives us
283 1999-01-19 Nick Clifton <nickc@cygnus.com>
285 * arm-dis.c (print_insn_arm): Display ARM syntax for PC relative
286 offsets as well as symbloic address.
288 Tue Jan 19 10:51:01 1999 David Taylor <taylor@texas.cygnus.com>
290 * hppa-dis.c: fix comments and some indentation.
292 1999-01-12 Doug Evans <devans@casey.cygnus.com>
294 * fr30-opc.c,i960c-opc.c: Regenerate.
296 1999-01-11 Doug Evans <devans@casey.cygnus.com>
298 * fr30-opc.c: Regenerate.
300 1999-01-06 Doug Evans <devans@casey.cygnus.com>
302 * m32r-dis.c: Regenerate.
304 1999-01-05 Doug Evans <devans@casey.cygnus.com>
306 * fr30-asm.c,fr30-dis.c,fr30-opc.h,fr30-opc.c: Regenerate.
307 * i960c-asm.c,i960c-dis.c,i960c-opc.h,i960c-opc.c: Regenerate.
308 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
310 1999-01-04 Jason Molenda (jsm@bugshack.cygnus.com)
312 * configure.in: Require autoconf 2.12.1 or higher.
314 1998-12-30 Gavin Romig-Koch <gavin@cygnus.com>
316 * mips16-opc.c: Mark branch insns with MIPS16_INSN_BRANCH.
318 Wed Dec 16 16:17:49 1998 Dave Brolley <brolley@cygnus.com>
320 * fr30-opc.c: Regenerated.
322 1998-12-16 Gavin Romig-Koch <gavin@cygnus.com>
324 * mips-dis.c (set_mips_isa_type): Handle bfd_mach_mips4111.
326 1998-12-15 Dave Brolley <brolley@cygnus.com>
328 * fr30-opc.c,fr30-opc.h: Regenerated.
330 1998-12-14 Dave Brolley <brolley@cygnus.com>
332 * fr30-opc.c,fr30-opc.h: Regenerated.
334 Thu Dec 10 18:39:46 1998 Dave Brolley <brolley@cygnus.com>
336 * fr30-opc.c,fr30-opc.h: Regenerated.
338 Thu Dec 10 12:49:24 1998 Doug Evans <devans@canuck.cygnus.com>
340 * m32r-opc.c: Regenerate.
342 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
344 * dis-buf.c (generic_strcat_address): reformat to GNU coding
345 conventions. change sprintf call to an sprintf_vma call.
347 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
349 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
351 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
353 The following changes were made by
354 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
355 David Taylor <taylor@texas.cygnus.com>, and
356 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
357 merge in changes by HP; HP did not create ChangeLog entries.
359 * dis-buf.c (generic_strcat_address): new function.
361 * hppa-dis.c: Changes to improve hppa disassembly.
362 Changed formatting in : reg_names, fp_reg_names,control_reg,
363 New variables : sign_extension_names, deposit_names, conversion_names
364 float_test_names, compare_cond_names_double, add_cond_names_double,
365 logical_cond_names_double, unit_cond_names_double,
366 branch_push_pop_names, saturation_names, shift_names, mix_names,
367 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
368 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
369 (fput_const): renamed as fput_hex_const
371 - use the macros fputs_filtered and
372 fput_decimal_const whenever possible; calls to sign_extend require
373 2 params -- add a missing second param of 0.
374 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
375 architecture version number of current machine. HP folks are
376 trying to handle situation where the target program was compiled
377 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
379 - added new cases : 'g', 'B', 'm'
380 - added cases specifically for PA 2.0
381 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
382 - calls to fput_const become calls to fput_hex_const
384 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
386 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
387 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
388 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
389 * Makefile.in: Rebuilt.
390 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
392 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
393 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
395 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
397 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
399 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
401 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
403 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
404 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
406 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
408 * fr30-opc.c: Regenerate.
410 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
412 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
414 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
416 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
418 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
420 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
422 1998-11-30 Doug Evans <devans@casey.cygnus.com>
424 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
425 CGEN_INSN_BASE_VALUE.
426 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
427 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
429 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
431 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
433 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
435 * fr30-asm.c,fr30-dis.c: Regenerated.
437 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
439 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
441 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
443 * fr30-opc.c: Regenerated.
445 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
447 * fr30-opc.c: Regenerated.
448 * fr30-opc.h: Regenerated.
449 * fr30-dis.c: Regenerated.
450 * fr30-asm.c: Regenerated.
452 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
454 * mips-opc.c (sync.p,sync.l): Swap insn values.
456 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
458 * fr30-opc.c: Regenerate.
460 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
462 * fr30-opc.c: Regenerated.
463 * fr30-opc.h: Regenerated.
465 1998-11-18 Doug Evans <devans@casey.cygnus.com>
467 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
468 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
470 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
472 * fr30-opc.c: Regenerated.
474 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
476 * fr30-opc.c: Regenerated.
477 * fr30-opc.h: Regenerated.
478 * fr30-dis.c: Regenerated.
479 * fr30-asm.c: Regenerated.
481 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
483 * po/opcodes.pot: Regenerated.
484 * fr30-opc.c: Regenerated.
485 * fr30-opc.h: Regenerated.
486 * fr30-dis.c: Regenerated.
487 * fr30-asm.c: Regenerated.
489 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
491 * disassemble.c (disassembler): Add support for FR30 target.
493 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
495 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
496 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
498 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
500 * po/opcodes.pot: Regenerate.
501 * po/POTFILES.in: Regenerate.
502 * fr30-opc.c: Regenerate.
503 * fr30-opc.h: Regenerate.
505 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
507 * m32r-asm.c: Regenerate.
509 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
511 * configure.in: Added case for bfd_fr30_arch.
512 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
513 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
514 (CLEANFILES): Added stamp-fr30.
516 * fr30-asm.c: New file.
517 * fr30-dis.c: New file.
518 * fr30-opc.c: New file.
519 * fr30-opc.h: New file.
520 * po/POTFILES.in: Regenerated
521 * po/opcodes.pot: Regenerated
523 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
525 * configure.in: detect cygwin* instead of cygwin32*
526 * configure: regenerate
528 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
530 * mips-opc.c (IS_M): Added.
532 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
534 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
536 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
538 * m32r-opc.h,m32r-opc.c: Regenerate.
540 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
542 * i386-dis.c (OP_3DNowSuffix): New static function.
545 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
546 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
547 (insn_codep): New static variable.
548 (print_insn_x86): Init insn_codep after prefixes.
549 (grps): Add GRP14 entries for prefetch, prefetchw.
552 From Jeff B Epler <jepler@usgs.gov>
553 * i386-dis.c (Suffix3DNow): New table.
555 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
557 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
559 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
561 * d10v-dis.c (print_operand): If num is nonzero, then
562 add OPERAND_ACC1, not OPERAND_ACC0.
564 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
566 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
569 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
571 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
574 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
576 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
578 1998-09-09 Michael Meissner <meissner@cygnus.com>
580 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
583 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
585 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
587 (print_insn_little_arm): Detect Thumb symbols in elf object
590 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
592 * alpha-dis.c (print_insn_alpha): Use the machine type to
593 decide which PALcode set to include.
595 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
597 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
599 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
601 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
602 MSUB and MSUBS instructions.
604 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
606 * ppc-opc.c (powerpc_operands): Omit parens around additions in
609 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
611 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
612 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
613 +, -, and d for ColdFire.
615 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
616 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
617 (extract_mbe): Likewise.
619 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
621 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
623 * m10300-opc.c: First cut at UDF instructions.
625 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
627 * m32r-opc.c: Regenerate (remove semantic descriptions).
629 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
631 * arm-dis.c (print_insn_big_arm): Fix indentation.
632 (print_insn_little_arm): Likewise.
634 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
636 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
638 (print_insn_little_arm): Likewise.
640 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
642 Move all global state data into opcode table struct, and treat
643 opcode table as something that is "opened/closed".
644 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
645 (cgen_asm_init): Delete.
646 (cgen_set_parse_operand_fn): New function.
647 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
648 (cgen_dis_init): Delete.
649 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
650 (cgen_current_{opcode_table_mach,endian}): Delete.
651 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
653 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
655 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
658 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
660 * m10300-opc.c: Add entries for "no_match_operands" field in
663 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
665 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
667 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
669 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
671 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
673 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
675 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
677 (OP_J): Remove unnecessary subtraction when 16-bit displacement
678 will be masked later.
680 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
682 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
684 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
686 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
688 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
690 * m10300-dis.c: Only recognize instructions from the currently
692 * m10300-opc.c: Add field indicating the particular variant of
693 the mn10300 each instruction is available on.
695 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
697 * configure.in: For bfd_vax_arch, build vax-dis.lo.
698 * Makefile.am: Rebuild dependencies.
699 (CFILES): Add vax-dis.c.
700 (ALL_MACHINES): Add vax-dis.lo.
701 * aclocal.m4: Rebuild with current libtool.
702 * configure, Makefile.in: Rebuild.
704 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
706 * vax-dis.c: New file, from work by Pauline Middelink
707 <middelin@polyware.iaf.nl>.
708 * disassemble.c (ARCH_vax): Define if ARCH_all.
709 (disassembler): Add case for ARCH_vax.
710 * makefile.vms: Support compilation on vms/vax.
712 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
714 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
715 related to sign extension and the size of ints.
717 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
719 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
720 instructions. Support (sp) addressing mode by expanding it into
723 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
725 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
727 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
729 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
731 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
733 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
736 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
738 * mips-dis.c (print_insn_little_mips): Previously, instruction
739 printing references the symbol table to determine whether the
740 instruction resides in a block regular instructions or mips16
741 instructions. However, when the disassembler gets used in other
742 environments where the symbol table is not present, we no longer
743 rely in the symbol table, rather, use the low bit of the
744 instructions address to guess. There should be no change for usage
745 of the disassembler in host based programs, gdb, objdump.
746 (print_insn_big_mips): ditto.
747 (print_insn_mips): ditto
749 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
751 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
753 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
755 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
757 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
759 * i386-dis.c (index16): Add '%' to register names. Use ','
762 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
764 * i386-dis.c: Don't print opcode suffix when we can figure out the
765 size (and gas can!) by register operands, or from the default
767 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
769 (dis386, dis386_twobyte, grps): Use new suffix macros.
770 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
771 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
772 order of cmps operands to agree with Intel docs. Correct operand
773 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
774 agree with Intel docs.
775 (print_insn_x86): Print orphan fwait before other prefixes.
776 Return correct byte count for orphan fwait with prefixes. Don't
777 print `bound' operands in reverse order.
778 (ckprefix): Stop accumulating prefixes if we get fwait.
779 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
781 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
783 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
784 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
786 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
788 Fix problems when bfd_vma is wider than long.
789 * i386-dis.c: Make op_address and start_pc unsigned.
790 (set_op): Make parameter unsigned.
791 (print_insn_x86): Cast to bfd_vma when passing a value to
793 * ns32k-dis.c (CORE_ADDR): Don't define.
794 (print_insn_ns32k): Change type of addr to bfd_vma. Use
795 bfd_scan_vma to read back address.
796 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
798 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
799 (NEXTULONG): New definition.
800 (print_insn_m68k): Avoid overflow when computing third argument of
802 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
803 Use disp instead of val to store offset values.
804 (print_indexed): Use base_disp instead of word to store base
805 displacement, to avoid overflow.
806 * m10300-dis.c (disassemble): Cast value to long when computing
807 pc-relative address, to get correct sign extension.
809 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
811 * m32r-opc.c: Regenerate.
813 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
815 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
816 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
818 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
820 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
822 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
824 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
826 (OP_DSreg): Rename from OP_DSSI.
827 (OP_ESreg): Rename from OP_ESDI.
828 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
830 (append_seg): Rename from append_prefix.
831 (ptr_reg): New function.
832 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
834 (PREFIX_ADDR): Rename from PREFIX_ADR.
835 (float_reg): Add non-broken opcodes for people who don't want
838 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
840 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
843 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
845 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
847 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
849 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
850 0; produce error message for shifts of size 32 (or 64 for 64-bit
851 shifts), because the hardware doesn't support them.
853 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
855 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
856 LONG_2, LONG_2b formats to use this new operand.
858 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
860 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
862 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
864 * sparc-dis.c (print_insn_sparc): big endian instruction / little
867 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
869 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
870 and SHORT_B3b formats to use Rb instead of Ra.
872 Add FLAG_MUL16 to MUL2XH opcode.
874 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
875 to existing 1.1.1 parallelisation prohibition procedure.
877 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
879 * m32r-asm.c,m32r-dis.c: Regenerate.
881 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
883 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
884 with a shift count of 0.
886 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
888 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
889 (cgen_hw_lookup_by_num): New function.
891 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
893 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
895 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
897 * sparc-dis.c (print_insn_sparc): Always fetch instructions
898 as big-endian on SPARClite.
900 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
902 * d30v-opc.c (pre_defined_register): Remove alias for r0.
904 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
906 * po/Make-in (install-info): New target.
908 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
910 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
911 * configure: Rebuild.
913 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
915 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
916 variety of ISA2 instructions to set bottom ten bits of trap code.
918 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
920 * Makefile.am (config.status): Add explicit target so that
921 config.status depends upon bfd/configure.in.
922 * Makefile.in: Rebuild.
924 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
926 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
927 instructions to set bottom ten bits of break code.
928 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
929 for above optional argument.
931 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
933 * makefile.vms: Run dec c with /nodebug.
935 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
937 * Makefile.in: Rebuilt.
938 * Makefile.am: Regenerated dependencies with mkdep.
940 * opintl.h (_): Define as dgettext.
942 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
944 * cgen-asm.c: Internationalised.
945 * m32r-asm.c: Internationalised.
946 * m32r-dis.c: Internationalised.
947 * m32r-opc.c: Internationalised.
949 * aclocal.m4: Regenerated.
950 * configure: Regenerated.
951 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
952 * Makefile.in: Rebuild.
953 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
954 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
956 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
958 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
960 * aclocal.m4, configure: Rebuild with current tools.
962 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
964 * opintl.h: New file - contains internationalisation macros used
965 by source files in this directory.
966 * po/: New subdirectory - contains internationalisation files.
967 * po/Make-in: New file - Makefile constructor.
968 * po/POTFILES.in: New file - list of files in opcodes directory
969 that should be scan for internationalisation macros.
970 * po/opcodes.pot: New file - list of internationisation strings
971 found in files mentioned in po/POTFILES.in.
972 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
973 entry. Add intl directory to include paths.
974 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
975 HAVE_STRCPY, HAVE_LC_MESSAGES
976 * configure.in: Add rule to build Makefile in po subdirectory.
977 * Makefile.in: Rebuilt.
978 * aclocal.m4: Rebuilt.
979 * config.in: Rebuilt.
980 * configure: Rebuilt.
981 * alpha-opc.c: Internationalised.
982 * arc-dis.c: Internationalised.
983 * arc-opc.c: Internationalised.
984 * arm-dis.c: Internationalised.
985 * cgen-asm.c: Internationalised.
986 * d30v-dis.c: Internationalised.
987 * dis-buf.c: Internationalised.
988 * h8300-dis.c: Internationalised.
989 * h8500-dis.c: Internationalised.
990 * i386-dis.c: Internationalised.
991 * m10200-dis.c: Internationalised.
992 * m10300-dis.c: Internationalised.
993 * m68k-dis.c: Internationalised.
994 * m88k-dis.c: Internationalised.
995 * mips-dis.c: Internationalised.
996 * ns32k-dis.c: Internationalised.
997 * opintl.h: Internationalised.
998 * ppc-opc.c: Internationalised.
999 * sparc-dis.c: Internationalised.
1000 * v850-dis.c: Internationalised.
1001 * v850-opc.c: Internationalised.
1003 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1005 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1006 (asm_hash_table_entries): New variable.
1007 (cgen_asm_init): Free asm_hash_table_entries.
1008 (hash_insn_array,hash_insn_list): New functions.
1009 (build_asm_hash_table): Use them. Hash macro insns as well.
1010 (cgen_asm_lookup_insn): Update.
1011 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1012 (dis_hash_table_entries): New variable.
1013 (cgen_dis_init): Free dis_hash_table_entries.
1014 (hash_insn_array,hash_insn_list): New functions.
1015 (build_dis_hash_table): Use them. Hash macro insns as well.
1016 (cgen_dis_lookup_insn): Update.
1017 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1018 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1019 (cgen_macro_insn_count): New function.
1020 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1022 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1024 * i386-dis.c (OP_DSSI): Print segment override.
1026 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1028 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1031 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1033 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1034 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1035 * configure.in: Define and substitute WIN32LDFLAGS and
1037 * aclocal.m4: Rebuild with new libtool.
1038 * configure, Makefile.in: Rebuild.
1040 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1042 * m32r-opc.c: Regenerate.
1044 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1046 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1047 before trying to copy it.
1048 * Makefile.in: Rebuild.
1050 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1052 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1054 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1056 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1057 from an arbitrary valid buffer instead of fetching them on demand
1059 (invalid_float): use bit_extract_simple() instead of bit_extract().
1061 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1063 From H.J. Lu <hjl@gnu.org>:
1064 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1067 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1069 * Branched binutils 2.9.
1071 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1073 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1074 disassembling last 4 bytes of a section.
1076 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1078 Fix some gcc -Wall warnings:
1079 * arc-dis.c (print_insn): Add casts to avoid warnings.
1080 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1081 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1082 * m10200-dis.c (disassemble): Likewise.
1083 * m10300-dis.c (disassemble): Likewise.
1084 * ns32k-dis.c (print_insn_ns32k): Likewise.
1085 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1086 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1087 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1088 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1089 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1090 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1091 * tic80-dis.c (print_one_instruction): Likewise.
1092 * w65-dis.c (print_operand): Likewise.
1093 * z8k-dis.c (fetch_data): Likewise.
1094 * a29k-dis.c: Add return type for find_byte_func_type.
1095 * arc-opc.c: Include <stdio.h>. Remove declarations of
1096 insert_multshift and extract_multshift.
1097 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1099 (extract_value): Fully parenthesize expression.
1100 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1101 * h8500-opc.h (h8500_table): Fully bracket initializer.
1102 * w65-opc.h (optable): Likewise.
1103 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1104 * i386-dis.c (OP_E): Initialize local variables.
1105 * m10200-dis.c (print_insn_mn10200): Likewise.
1106 * mips-dis.c (print_insn_mips16): Likewise.
1107 * sh-dis.c (print_insn_shx): Likewise.
1108 * v850-dis.c (print_insn_v850): Likewise.
1109 * ns32k-dis.c (print_insn_arg): Declare.
1110 (get_displacement, invalid_float): Declare.
1111 (list_search, sign_extend, flip_bytes): Declare return type.
1112 (get_displacement): Likewise.
1113 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1115 (print_insn_ns32k): Make i unsigned.
1116 (invalid_float): Make static. Declare type of val.
1117 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1118 on each for iteration.
1119 * tic30-dis.c (get_indirect_operand): Likewise.
1120 * z8k-dis.c (print_insn_z8001): Declare return type.
1121 (print_insn_z8002): Likewise.
1122 (unparse_instr): Fix sprintf format strings.
1124 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1126 * mips-opc.c: Add "sync.l" and "sync.p".
1128 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1130 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1131 default m68k variant to recognize.
1133 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1134 (ctrl, cobr, mem, ea): Likewise.
1135 (print_addr): Likewise. Remove cast.
1136 (ea): Cast argument of print_addr to bfd_vma.
1138 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1140 (cgen_parse_unsigned_integer): Likewise.
1141 (cgen_parse_address): Likewise.
1143 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1145 * i960-dis.c (ctrl): Add full braces to structure initialization.
1146 (cobr, mem, reg): Likewise.
1147 (ea): Correct parenthesization in expression.
1149 * cgen-asm.c: Include <ctype.h>.
1150 (build_asm_hash_table): Remove unused local variable i.
1151 (cgen_parse_keyword): Add casts to avoid warnings.
1153 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1154 symbol. Fix indentation.
1155 (print_insn_little_arm): Likewise.
1157 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1159 * configure.in: Use AM_DISABLE_SHARED.
1160 * aclocal.m4, configure: Rebuild with libtool 1.2.
1162 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1164 These patches are courtesy of Jonathan Walton and Tony Thompson
1165 (athompso@cambridge.arm.com).
1167 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1170 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1171 both the offset and the label closest to the destination.
1173 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1175 * m32r-opc.h: Regenerate.
1177 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1179 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1181 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1183 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1184 assume that info->symbols is non-empty.
1186 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1188 * alpha-opc.c (cvtqs) There is no such thing.
1189 (cvttq): Missing most of the /*d variants.
1191 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1193 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1194 delayed branches or jumps.
1196 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1198 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1200 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1201 * tic30-dis.c (print_branch): Likewise.
1203 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1205 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1206 saved_symbol code as it is no longer needed.
1208 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1210 * cgen-asm.c: Include symcat.h.
1211 * cgen-dis.c,cgen-opc.c: Ditto.
1212 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1214 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1216 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1218 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1220 * m32r-opc.[ch]: Regenerate.
1222 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1224 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1225 arguments. Don't perform validation here.
1226 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1228 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1230 * m32r-opc.c: Regenerate.
1232 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1234 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1235 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1237 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1239 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1241 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1243 * configure.in: Get the version number from BFD.
1244 * configure: Rebuild.
1246 From H.J. Lu <hjl@gnu.org>:
1247 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1248 * Makefile.in: Rebuild.
1250 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1252 * m32r-opc.c: Regenerate.
1253 * m32r-opc.h: Regenerate.
1255 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1257 * m32r-opc.c: Regenerate.
1259 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1261 Fix rac to accept only a0:
1262 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1263 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1264 Introduce OPERAND_GPR.
1265 * d10v-dis.c (print_operand): Likewise.
1267 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1269 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1270 (cgen_hw_lookup): Make result const.
1271 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1273 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1275 * configure, aclocal.m4: Rebuild with new libtool.
1277 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1279 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1280 instructions use a PC relative branch, not absolute.
1282 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1284 * configure.in: Set libtool_enable_shared rather than
1285 libtool_shared. Remove diversion hack.
1286 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1288 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1290 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1291 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1293 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1295 * tic30-dis.c: New file.
1296 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1297 * configure.in: Handle bfd_tic30_arch.
1298 * Makefile.am: Rebuild dependencies.
1299 (CFILES): Add tic30-dis.c
1300 (ALL_MACHINES): Add tic30-dis.lo.
1301 * configure, Makefile.in: Rebuild.
1303 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1305 * m32r-opc.h (HAVE_CPU_M32R): Define.
1307 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1309 * v850-opc.c (insertion routines): If both alignment and size is
1310 wrong then report this.
1312 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1314 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1315 Only recognize instructions for the current target_processor.
1317 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1319 * d10v-dis.c (PC_MASK): Correct value.
1320 (print_operand): If there's a reloc, don't calculate the
1321 address because they could be in different sections.
1323 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1325 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1326 instruction after the 4650's "mul" instruction; nobody's using the
1327 4010 these days. If object files someday indicate which processor
1328 variant they're intended for, we can do a better job at this.
1330 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1332 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1333 table provided entry size. Use CGEN_INSN_MNEMONIC.
1334 (cgen_parse_keyword): Rewrite.
1335 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1336 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1337 * cgen-opc.c: Clean up pass over `struct foo' usage.
1338 (cgen_keyword_lookup_value): Handle "" entry.
1339 (cgen_keyword_add): Likewise.
1341 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1343 * mips-opc.c: Add FP_D to s.d instruction flags.
1345 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1347 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1349 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1351 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1352 PC relative offset forms before the 15 bit forms. An assembler command
1353 line option now chooses the default.
1355 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1357 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1358 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1360 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1362 * configure: Only build libopcodes shared if --enable-shared's value
1363 was `yes', or was set to `*opcodes*'.
1364 * aclocal.m4: Likewise.
1365 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1366 original source of this bit of code. It's not clear what the best fix
1369 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1371 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1372 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1373 offset forms before the 15 bit forms, to default to the long forms.
1375 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1377 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1379 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1381 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1382 symbol if none is present.
1383 (print_insn_big_arm): Prevent examination of stored symbol if
1386 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1388 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1390 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1392 * disassemble.c: Remove disasm_symaddr() function.
1394 * arm-dis.c: Use info->symbol instead of info->flags to determine
1395 if disassmbly should be in Thumb or Arm mode.
1397 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1399 * arm-dis.c: Add support for disassembling Thumb opcodes.
1400 (print_insn_thumb): New function.
1402 * disassemble.c (disasm_symaddr): New function.
1404 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1405 (thumb_opcodes): Table of Thumb opcodes.
1407 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1409 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1411 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1412 and 'v' as operand types.
1414 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1416 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1417 <olivier.carmona@di.epfl.ch>.
1418 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1419 which has a two word opcode with a one word argument.
1421 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1423 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1424 unsigned, not signed.
1425 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1427 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1429 * d10v-dis.c (print_operand):
1430 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1432 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1434 * d10v-opc.c (OPERAND_FLAG): Split into:
1435 (OPERAND_FFLAG, OPERAND_CFLAG) .
1439 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1441 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1442 field for all INSN_MACRO's.
1443 * mips16-opc.c: same
1445 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1447 * mips-opc.c (sync,cache): These are 3900 insns.
1449 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1451 sh-opc.h (sh_table): Remove ftst/nan.
1453 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1455 * mips-opc.c (ffc, ffs): Fix mask.
1457 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1459 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1462 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1464 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1465 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1467 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1469 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1470 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1472 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1474 * v850-dis.c (disassemble): Replace // with /* ... */
1476 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1478 * sparc-opc.c: Add wr & rd for v9a asr's.
1479 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1480 (v9a_asr_reg_names): New variable.
1481 Patch from David Miller <davem@vger.rutgers.edu>.
1483 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1485 * sparc-opc.c (v9notv9a): New insn type.
1486 (IMPDEP): Move to the end to not conflict with edge8 et al.
1487 Patch from David Miller <davem@vger.rutgers.edu>.
1489 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1491 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1493 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1495 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1497 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1499 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1500 of disassemble_info structure to determine if an overlay address
1501 has a matching symbol in low memory.
1503 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1504 new symbol_at_address_func field in disassemble_info structure.
1506 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1508 * v850-opc.c (extract_d22): Use signed arithmatic.
1510 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1512 * mips-opc.c: Three op mult is not an ISA insn.
1514 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1516 * mips-opc.c: Fix formatting.
1518 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1520 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1521 than assuming that char is signed. Explicitly sign extend 16 bit
1522 values, rather than assuming that short is 16 bits.
1523 (OP_sI, OP_J, OP_DIR): Likewise.
1525 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1527 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1530 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1532 * v850-opc.c: Fix typo in comment.
1534 * v850-dis.c (disassemble): Add test of processor type when
1535 determining opcodes.
1537 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1539 * configure.in: Use a diversion to set enable_shared before the
1540 arguments are parsed.
1541 * configure: Rebuild.
1543 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1545 * m68k-opc.c (TBL1): Use ! rather than `.
1546 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1548 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1550 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1552 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1554 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1557 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1558 * aclocal.m4: Rebuild with new libtool.
1559 * configure: Rebuild.
1561 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1563 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1565 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1567 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1569 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1571 * v850-opc.c (v850_opcodes): Further rearrangements.
1573 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1575 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1577 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1579 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1582 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1584 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1586 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1588 * v850-opc.c: Initialise processors field of v850_opcode structure.
1590 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1592 Merge changes from Martin Hunt:
1594 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1596 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1597 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1598 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1600 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1602 * d30v-dis.c (print_insn): First operand of d*i (delayed
1603 branch) instructions is relative.
1605 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1606 (d30v_operand_table): Add IMM6S3 type.
1607 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1609 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1610 and cmp instructions.
1612 * d30v-opc.c: Correct entries for repeat*, and sat*.
1613 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1614 types. Correct several formats.
1616 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1618 * d30v-opc.c (pre_defined_registers): Change control registers.
1620 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1621 SHORT_C2. Manual was incorrect.
1623 * d30v-dis.c (lookup_opcode): Return value now indicates
1624 if an opcode has a short and a long form. Used for deciding
1625 to append a ".s" or ".l".
1626 (print_insn): Append a ".s" to an instruction if it is
1627 the short form and ".l" if it is a long form. Do not append
1628 anything if the instruction has only one possible size.
1630 * d30v-opc.c: Change mulx2h to require an even register.
1631 New form: SHORT_A2; a SHORT_A form that needs an even
1632 register as the first operand.
1634 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1635 instruction was not being disassembled if there were an odd
1636 number of instructions.
1638 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1640 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1642 * v850-dis.c (disassemble): Improved display of register lists.
1644 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1646 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1647 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1648 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1649 fandnot1s, fandnot2s.
1651 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1653 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1655 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1657 * cgen-asm.c (cgen_parse_address): New argument resultp.
1658 All callers updated.
1659 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1661 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1663 * mn10200-dis.c (disassemble): PC relative instructions are
1664 relative to the next instruction, not the current instruction.
1666 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1668 * v850-dis.c (disassemble): Only signed extend values that are not
1669 returned by extract functions.
1670 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1672 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1674 * v850-opc.c: Update comments. Remove use of
1675 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1677 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1679 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1681 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1683 * configure: Rebuilt with latest devo autoconf for NT support.
1685 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1687 * v850-dis.c (disassemble): Use curly brace syntax for register
1690 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1691 where r0 is being used as a destination register.
1693 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1695 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1697 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1699 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1701 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1703 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1704 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1707 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1709 * configure (cgen_files): Add support for v850e target.
1710 * configure.in (cgen_files): Add support for v850e target.
1712 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1714 * configure (cgen_files): Add support for v850ea target.
1715 * configure.in (cgen_files): Add support for v850ea target.
1717 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1719 * configure.in (bfd_arc_arch): Add.
1720 * configure: Rebuild.
1721 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1722 * Makefile.in: Rebuild.
1723 * arc-dis.c, arc-opc.c: New files.
1724 * disassemble.c (ARCH_all): Define ARCH_arc.
1725 (disassembler): Add ARC support.
1727 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1729 * v850-dis.c (disassemble): Add support for v850EA instructions.
1731 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1732 (v850_opcodes): Add v850EA instructions.
1734 * v850-dis.c (disassemble): Add support for v850E instructions.
1736 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1737 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1738 insert_spe, extract_spe): New Functions.
1739 (v850_opcodes): Add v850E instructions.
1741 * v850-opc.c: Reorganised and re-layed out to improve readability
1744 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1746 * configure: Rebuild with autoconf 2.12.1.
1748 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1750 * aclocal.m4, configure: Rebuild with new automake patches.
1752 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1754 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1755 * acinclude.m4: Just include acinclude.m4 from BFD.
1756 * aclocal.m4, configure: Rebuild.
1758 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1760 * Makefile.am: New file, based on old Makefile.in.
1761 * acconfig.h: New file.
1762 * acinclude.m4: New file.
1763 * stamp-h.in: New file.
1764 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1765 Removed shared library handling; now handled by libtool. Replace
1766 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1767 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1768 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1769 handling in AC_OUTPUT.
1770 * dep-in.sed: Change .o to .lo.
1771 * Makefile.in: Now built with automake.
1772 * aclocal.m4: Now built with aclocal.
1773 * config.in, configure: Rebuild.
1775 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1777 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1779 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1781 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1783 * sparc-dis.c (sorted_opcodes): New static local.
1784 (struct opcode_hash): `opcode' is pointer to const element.
1785 (build_hash): First arg is now table of sorted pointers.
1786 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1787 (compare_opcodes): Update.
1789 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1791 * cgen-opc.c: #include <ctype.h>.
1792 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1793 Handle case insensitive hashing.
1794 (hash_keyword_value): Change type of `value' to unsigned int.
1796 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1798 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1799 precision FP, mark it as such. Likewise for double precision
1800 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1803 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
1805 * ppc-opc.c (extract_nsi): make unsigned expression signed before
1807 (UNUSED): remove one level of parens, so MSVC doesn't choke on
1808 nesting depth when all the macros are expanded.
1810 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
1812 * sparc-opc.c: The fcmp v9a instructions take an integer register
1813 as a destination, not a floating point register. From Christian
1814 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
1816 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
1818 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
1819 syntax. From Roman Hodek
1820 <rnhodek@faui22c.informatik.uni-erlangen.de>.
1822 * i386-dis.c (twobyte_has_modrm): Fix pand.
1824 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
1826 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
1828 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
1830 * arm-dis.c: Add prototypes for arm_decode_shift and
1833 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
1835 * mips-opc.c: Add r3900 insns.
1837 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
1839 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
1840 print delay slot instructions on the same line. When using a PC
1841 relative load, add a comment with the value being loaded if it can
1844 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
1846 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
1847 to pushS/popS for segment regs and byte constant so that
1848 pushw/popw printed when in 16 bit data mode.
1850 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
1851 print cbtw, cwtd in 16 bit data mode.
1852 * i386-dis.c (putop): extra case W to support above.
1854 * i386-dis.c (print_insn_x86): print addr32 prefix when given
1855 address size prefix in 16 bit address mode.
1857 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
1859 * sh-dis.c: Reindent. Rename local variable fprintf to
1862 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
1864 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
1866 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
1868 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
1870 * mips16-opc.c (mip16_opcodes): same.
1872 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
1874 * m68k-opc.c (moveb): Change $d to %d.
1876 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
1878 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
1879 (twobyte_has_modrm): Likewise.
1881 (OP_MMX, OP_EM, OP_MS): New static functions.
1883 * i386-dis.c: Revert patch of April 4. The output now matches
1886 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
1888 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
1891 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
1893 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
1895 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
1897 * Makefile.in (install): Depend upon installdirs.
1898 (installdirs): New target.
1900 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
1902 From Thomas Graichen <graichen@rzpd.de>:
1903 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
1904 * configure: Rebuild.
1906 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
1908 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
1909 Delete string{,s}.h support.
1911 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
1913 * cgen-asm.c (cgen_parse_operand_fn): New global.
1914 (cgen_parse_{{,un}signed_integer,address}): Update call to
1915 cgen_parse_operand_fn.
1916 (cgen_init_parse_operand): New function.
1917 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
1918 from cgen_asm_init_parse.
1919 (m32r_cgen_assemble_insn): New operand `errmsg'.
1920 Delete call to as_bad, return error message to caller.
1921 (m32r_cgen_asm_hash_keywords): #if 0 out.
1923 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1925 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
1927 [case 'J']: Fix typo in register name.
1929 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
1931 * configure.in: Substitute SHLIB_LIBS.
1932 * configure: Rebuild.
1933 * Makefile.in (SHLIB_LIBS): New variable.
1934 ($(SHLIB)): Use $(SHLIB_LIBS).
1936 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
1938 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
1940 * cgen-opc.c (hash_keyword_name): Improve algorithm.
1942 * disassemble.c (disassembler): Handle m32r.
1944 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
1946 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
1947 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
1948 * Makefile.in (CFILES): Add them.
1949 (ALL_MACHINES): Add them.
1950 (dependencies): Regenerate.
1951 * configure.in (cgen_files): New variable.
1952 (bfd_m32r_arch): Add entry.
1953 * configure: Regenerate.
1955 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
1957 * configure.in: Correct file names for bfd_mn10[23]00_arch.
1958 * configure: Rebuild.
1960 * Makefile.in: Rebuild dependencies.
1962 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
1964 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
1967 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
1969 * Branched binutils 2.8.
1971 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
1973 * m10200-dis.c: Rename from mn10200-dis.c.
1974 * m10200-opc.c: Rename from mn10200-opc.c.
1975 * m10300-dis.c: Rename from mn10300-dis.c
1976 * m10300-opc.c: Rename from mn10300-opc.c.
1977 * Makefile.in: Update accordingly.
1979 * mips16-opc.c: Add mul and dmul macros.
1981 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
1983 * makefile.vms: Update CFLAGS, add clean target.
1985 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
1987 * mips-opc.c: Add "wait". From Ralf Baechle
1988 <ralf@gnu.ai.mit.edu>.
1990 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
1991 * configure, config.in: Rebuild.
1992 * sysdep.h: Include <stdlib.h> if it exists.
1993 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
1995 * Makefile.in: Rebuild dependencies.
1997 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
1999 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2000 Andrew Bray <andy@madhouse.demon.co.uk>.
2002 * mips-opc.c: Add cast when setting mips_opcodes.
2004 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2006 * v850-dis.c (disassemble): Fix sign extension problem.
2007 * v850-opc.c (extract_d*): Fix sign extension problems to make
2008 disassembly calculate branch offsets correctly.
2010 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2012 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2014 * mips-opc.c: Add dctr and dctw.
2016 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2018 * d30v-dis.c (print_insn): Change the way signed constants
2021 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2023 * Makefile.in (BFD_H): New variable.
2024 (HFILES): New variable.
2025 (CFILES): Add all C files.
2026 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2027 Delete old dependencies, and build new ones.
2028 * dep-in.sed: New file.
2030 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2032 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2034 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2036 * mn10200-opc.c: Change "trap" to "syscall".
2037 * mn10300-opc.c: Add new "syscall" instruction.
2039 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2041 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2042 mulul insns on the coldfire.
2044 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2046 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2047 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2048 (print_insn_little_arm): Likewise.
2050 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2052 Based on patches from H.J. Lu <hjl@lucon.org>:
2053 * i386-dis.c (fetch_data): Add prototype.
2054 * m68k-dis.c (fetch_data): Add prototype.
2055 (dummy_print_address): Add prototype. Make static.
2056 * ppc-opc.c (valid_bo): Add prototype.
2057 * sparc-dis.c (build_hash_table): Add prototype.
2058 (is_delayed_branch, compute_arch_mask): Add prototypes.
2059 (print_insn_sparc): Make several local variables const.
2060 (compare_opcodes): Change arguments to const PTR. Add prototype.
2061 * sparc-opc.c (arg): Change name field to be const.
2062 (lookup_name, lookup_value): Add prototypes. Change table and
2063 name parameters to be const.
2064 (sparc_encode_asi): Change name parameter to be const.
2065 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2066 (sparc_encode_sparclet_cpreg): Likewise.
2067 (sparc_decode_asi): Change return type to be const.
2068 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2069 (sparc_decode_sparclet_cpreg): Likewise.
2071 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2073 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2074 Solaris doesn't like the combined options, and the -f is
2076 (stamp-tshlink, install): Likewise.
2078 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2080 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2083 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2085 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2087 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2089 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2092 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2094 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2096 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2098 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2100 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2102 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2104 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2106 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2107 floatformat_to_double to make portable.
2108 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2111 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2113 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2114 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2116 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2118 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2119 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2121 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2123 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2124 (OFF_SL_BR_SCALED): ... to this, and added the flag
2125 TIC80_OPERAND_BASEREL to the flags word.
2126 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2129 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2131 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2132 Change mips_opcodes from const array to a pointer,
2133 and change bfd_mips_num_opcodes from const int to int,
2134 so that we can increase the size of the mips opcodes table
2137 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2139 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2140 store BITNUM values in the table in one's complement form
2141 to match behavior when assembler is given a raw numeric
2142 value for a BITNUM operand.
2143 * tic80-dis.c (print_operand_bitnum): Ditto.
2145 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2147 * d30v-opc.c: Removed references to FLAG_X.
2149 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2151 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2153 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2155 * Makefile.in: Added d30v object files.
2156 * configure: (bfd_d30v_arch) Rebuilt.
2157 * configure.in: (bfd_d30v_arch) Added new case.
2158 * d30v-dis.c: New file.
2159 * d30v-opc.c: New file.
2160 * disassemble.c (disassembler) Add entry for d30v.
2162 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2164 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2165 representations for the floating point BITNUM values.
2167 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2169 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2170 in the table in one's complement form, as they appear in the
2172 (tic80_symbol_to_value): Use macros to access predefined
2174 (tic80_value_to_symbol): Ditto.
2175 (tic80_next_predefined_symbol): New function.
2176 * tic80-dis.c (print_operand_bitnum): Remove code that did
2177 one's complement for BITNUM values.
2179 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2181 * makefile.vms: Remove 8 bit characters. Update to latest
2184 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2186 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2188 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2190 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2191 (IMM24_PCREL): Likewise.
2193 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2195 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2196 address for an extended PC relative instruction that is not a
2199 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2201 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2204 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2206 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2207 (tic80_opcodes): Sort entries so that long immediate forms
2208 come after short immediate forms, making it easier for
2209 assembler to select the right one for a given operand.
2211 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2213 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2215 (print_insn_mips16): Likewise.
2217 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2219 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2220 a symbol class that restricts translation to just that
2221 class (general register, condition code, etc).
2223 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2225 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2226 and REG_DEST_E for register operands that have to be
2227 an even numbered register. Add REG_FPA for operands that
2228 are one of the floating point accumulator registers.
2229 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2230 (tic80_opcodes): Change entries that need even numbered
2231 register operands to use the new operand table entries.
2232 Add "or" entries that are identical to "or.tt" entries.
2234 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2236 * mips16-opc.c: Add new cases of exit instruction for
2238 * mips-dis.c (print_mips16_insn_arg): Display floating point
2239 registers in operands of exit instruction. Print `$' before
2240 register names in operands of entry and exit instructions.
2242 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2244 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2245 pairs for all predefined symbols recognized by the assembler.
2246 Also used by the disassembling routines.
2247 (tic80_symbol_to_value): New function.
2248 (tic80_value_to_symbol): New function.
2249 * tic80-dis.c (print_operand_control_register,
2250 print_operand_condition_code, print_operand_bitnum):
2251 Remove private tables and use tic80_value_to_symbol function.
2253 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2255 * d10v-dis.c (print_operand): Change address printing
2256 to correctly handle PC wrapping. Fixes PR11490.
2258 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2260 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2263 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2265 * mips-dis.c (print_insn_mips16): Set insn_info information.
2266 (print_mips16_insn_arg): Likewise.
2268 * mips-dis.c (print_insn_mips16): Better handling of an extend
2269 opcode followed by an instruction which can not be extended.
2271 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2273 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2274 coldfire moveb instruction to not allow an address register as
2275 destination. Although the documentation does not indicate that
2276 this is invalid, experiments uncovered unexpected behavior.
2277 Added a comment explaining the situation. Thanks to Andreas
2278 Schwab for pointing this out to me.
2280 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2282 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2283 entries are presorted so that entries with the same mnemonic are
2284 adjacent to each other in the table. Sort the entries for each
2285 instruction so that this is true.
2287 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2289 * m68k-dis.c: Include <libiberty.h>.
2290 (print_insn_m68k): Sort the opcode table on the most significant
2291 nibble of the opcode.
2293 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2295 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2296 "vsub", "vst", "xnor", and "xor" instructions.
2297 (V_a1): Renamed from V_a, msb of accumulator reg number.
2298 (V_a0): Add macro, lsb of accumulator reg number.
2300 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2302 * tic80-dis.c (print_insn_tic80): Broke excessively long
2303 function up into several smaller ones and arranged for
2304 the instruction printing function to be callable recursively
2305 to print vector instructions that have both a load and a
2306 math instruction packed into a single opcode.
2307 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2308 to explain why it comes after the other vector opcodes.
2310 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2312 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2313 move insns to handle immediate operands.
2315 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2317 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2318 fix operand mask in the "moveml" entries for the coldfire.
2320 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2322 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2323 New macros for building vector instruction opcodes.
2324 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2325 FMT_LI, which were unused. The field is now a flags field.
2326 Remove some opcodes that are possible, but illegal, such
2327 as long immediate instructions with doubles for immediate
2328 values. Add "vadd" and "vld" instructions.
2330 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2332 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2333 the order more logical. Move the shift alias instructions ("rotl",
2334 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2335 interspersed with the regular sr.x and sl.x instructions. Add
2336 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2337 "sub", "subu", "swcr", and "trap".
2339 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2341 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2342 (OFF_SL_PC): Renamed from OFF_SL.
2343 (OFF_SS_BR): New operand type for base relative operand.
2344 (OFF_SL_BR): New operand type for base relative operand.
2345 (REG_BASE): New operand type for base register operand.
2346 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2347 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2348 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2350 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2351 10 char field, padded with spaces on rhs, rather than a string
2352 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2353 than old TIC80_OPERAND_RELATIVE. Add support for new
2354 TIC80_OPERAND_BASEREL flag bit.
2356 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2358 * tic80-dis.c (print_insn_tic80): Print floating point operands
2360 * tic80-opc.c (SPFI): Add single precision floating point
2361 immediate operand type.
2362 (ROTATE): Add rotate operand type for shifts.
2363 (ENDMASK): Add for shifts.
2364 (n): Macro for the 'n' bit.
2365 (i): Macro for the 'i' bit.
2366 (PD): Macro for the 'PD' field.
2367 (P2): Macro for the 'P2' field.
2368 (P1): Macro for the 'P1' field.
2369 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2372 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2374 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2375 adding in current address for pc-relative operands.
2377 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2379 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2380 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2381 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2382 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2383 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2384 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2385 (REG_SCALED, LSI_SCALED): New operand types.
2386 (E): New macro for 'E' bit at bit 27.
2387 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2388 opcodes, including the various size flavors (b,h,w,d) for
2389 the direct load and store instructions.
2391 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2393 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2395 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2396 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2397 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2398 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2399 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2400 masks with "MASK_* & ~M_*" to get the M bit reset.
2401 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2403 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2405 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2406 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2407 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2409 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2410 CC, SICR, and LICR table entries.
2411 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2412 "bcnd", and "brcr" opcodes.
2414 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2416 * ppc-opc.c (powerpc_operands): Make comment match the
2417 actual fields (no shift field).
2418 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2419 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2420 partial implementation, work in progress.
2421 * tic80-opc.c (tic80_operands): Begin construction operands table.
2422 (tic80_opcodes): Continue populating opcodes table and start
2423 filling in the operand indices.
2424 (tic80_num_opcodes): Add this.
2426 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2428 * m68k-opc.c: Add #B case for moveq.
2430 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2432 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2433 before they are used.
2435 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2437 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2438 for "breakpoint" instruction.
2440 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2442 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2443 (dep): Use ALL_CFLAGS rather than CFLAGS.
2445 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2447 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2450 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2452 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2453 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2455 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2457 * mips16-opc.c: Add "abs".
2459 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2461 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2462 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2463 (disassembler): Add bfd_arch_tic80 support to set disassemble
2464 to print_insn_tic80.
2465 * tic80-dis.c (print_insn_tic80): Add stub.
2467 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2469 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2470 * configure: Regenerate with autoconf.
2471 * tic80-dis.c: Add file.
2472 * tic80-opc.c: Add file.
2474 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2476 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2478 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2480 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2481 (mn10200_opcodes): Use it for some logicals and btst insns.
2482 Add "break" and "trap" instructions.
2484 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2486 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2488 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2490 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2491 relative load or add now depends upon whether the instruction is
2494 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2496 * mn10200-dis.c: Finish writing disassembler.
2497 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2498 Fix mask for "jmp (an)".
2500 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2501 handle endianness issues for mn10300.
2503 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2505 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2507 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2508 instruction. Fix opcode field for "movb (imm24),dn".
2510 * mn10200-opc.c (mn10200_operands): Fix insertion position
2513 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2515 * mn10200-opc.c: Create mn10200 opcode table.
2516 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2517 but moving along nicely.
2519 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2521 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2523 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2525 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2526 specifiers for fmovem* instructions.
2528 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2530 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2532 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2534 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2537 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2539 * mn10300-opc.c: Add some comments explaining the various
2542 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2544 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2546 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2549 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2550 operand specifiers in fmovm* instructions.
2552 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2554 * ppc-opc.c (insert_li): Give an error if the offset has the two
2555 least significant bits set.
2557 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2559 * mips-dis.c (print_insn_mips16): Separate the instruction from
2560 the arguments with a tab, not a space.
2562 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2564 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2567 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2570 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2572 * configure: Rebuild with autoconf 2.12.
2574 Add support for mips16 (16 bit MIPS implementation):
2575 * mips16-opc.c: New file.
2576 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2577 (mips16_reg_names): New static array.
2578 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2579 after seeing a 16 bit symbol.
2580 (print_insn_little_mips): Likewise.
2581 (print_insn_mips16): New static function.
2582 (print_mips16_insn_arg): New static function.
2583 * mips-opc.c: Add jalx instruction.
2584 * Makefile.in (mips16-opc.o): New target.
2585 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2586 * configure: Rebuild.
2588 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2590 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2591 operand specifiers in *save, *restore and movem* instructions.
2593 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2596 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2597 register operands for immediate arithmetic, not, neg, negx, and
2598 set according to condition instructions.
2600 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2601 specifier of the effective-address operand in immediate forms of
2602 arithmetic instructions. The specifier for the immediate operand
2603 notes how and where the constant will be stored.
2605 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2607 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2610 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2613 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2615 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2617 * mn10300-dis.c (disassemble): Handle register lists.
2619 * mn10300-opc.c: Fix handling of register list operand for
2620 "call", "ret", and "rets" instructions.
2622 * mn10300-dis.c (disassemble): Print PC-relative and memory
2623 addresses symbolically if possible.
2624 * mn10300-opc.c: Distinguish between absolute memory addresses,
2625 pc-relative offsets & random immediates.
2627 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2629 (disassemble): Handle SPLIT and EXTENDED operands.
2631 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2633 * mn10300-dis.c: Rough cut at printing some operands.
2635 * mn10300-dis.c: Start working on disassembler support.
2636 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2638 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2640 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2642 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2644 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2646 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2648 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2649 register argument is calls and jmp instructions.
2651 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2653 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2654 getx operand. Fix opcode for mulqu imm,dn.
2656 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2658 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2659 in MN10300_OPERAND_SPLIT operands for how many bits
2660 appear in the basic insn word. Add IMM32_HIGH24,
2661 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2662 (mn10300_opcodes): Use new operands as needed.
2664 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2665 for bset, bclr, btst instructions.
2666 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2668 * mn10300-opc.c (mn10300_operands): Remove many redundant
2669 operands. Update opcode table as appropriate.
2670 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2671 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2673 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2675 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2676 operands (for indexed load/stores). Fix bitpos for DI
2677 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2678 few instructions that insert immediates/displacements in the
2679 middle of the instruction. Add IMM8E for 8 bit immediate in
2680 the extended part of an instruction.
2681 (mn10300_operands): Use new opcodes as appropriate.
2683 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2685 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2686 sequential so the assembler never parallelizes it with
2689 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2691 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2692 a data/address register that appears in register field 0
2693 and register field 1.
2694 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2696 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2698 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2699 standard disassembly.
2701 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2702 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2703 Recategorize PALcode instructions.
2705 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2707 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2709 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2711 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2712 there are no operand types.
2714 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2716 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2718 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2720 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2722 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2724 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2726 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2727 and sst.w instructions.
2729 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2732 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2734 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2737 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2739 * ppc-opc.c (PPCPWR2): Define.
2740 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2743 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2745 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2746 field for movhu instruction.
2748 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2749 cast value to "long" not "signed long" to keep hpux10
2752 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2754 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
2757 * mn10300-opc.c (FMT*): Remove definitions.
2759 * mn10300-opc.c (mn10300_opcodes): Fix destination register
2760 for shift-by-register opcodes.
2762 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
2763 into [AD][MN][01] for encoding the position of the register
2766 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
2768 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
2769 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
2771 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
2773 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
2774 Fix various typos. Add "PAREN" operand.
2775 (MEM, MEM2): Define.
2776 (mn10300_opcodes): Surround all memory addresses with "PAREN"
2777 operands. Fix several typos.
2779 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
2782 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
2784 * mn10300-opc.c (FMT_XX): Renumber starting at one.
2785 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
2787 (mn10300_opcodes): Break opcode format out into its own field.
2788 Update many operand fields to deal with signed vs unsigned
2789 issues. Fix one or two typos in the "mov" instruction
2790 opcode, mask and/or operand fields.
2792 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2794 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
2795 m68851 wasn't reset.
2797 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
2799 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
2800 all opcodes. Very rough cut at operands for all opcodes.
2802 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
2805 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
2807 * mn10200-opc.c, mn10300-opc.c: New files.
2808 * mn10200-dis.c, mn10300-dis.c: New files.
2809 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
2810 * disassemble.c: Break mn10x00 support into 10200 and 10300
2812 * configure.in: Likewise.
2813 * configure: Rebuilt.
2815 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
2817 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
2819 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
2821 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
2823 * disassemble (ARCH_mn10x00): Define.
2824 (disassembler): Handle bfd_arch_mn10x00.
2825 * configure.in: Recognize bfd_mn10x00_arch.
2826 * configure: Rebuilt.
2828 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
2830 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
2831 accordingly. Don't declare functions using op_rtn.
2833 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
2835 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
2836 params to be more standard.
2837 * (disassemble): Print absolute addresses and symbolic names for
2838 branch and jump targets.
2839 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
2841 * (v850_opcodes): Add breakpoint insn.
2843 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
2845 * m68k-opc.c: Move the fmovemx data register cases before the
2846 other cases, so that they get recognized before the data register
2847 does gets treated as a degenerate register list.
2849 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
2851 * mips-opc.c: Add a case for "div" and "divu" with two registers
2852 and a destination of $0.
2854 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
2856 * mips-dis.c (print_insn_arg): Add prototype.
2857 (_print_insn_mips): Ditto.
2859 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
2861 * mips-dis.c (print_insn_arg): Print condition code registers as
2864 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
2866 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
2868 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
2870 * v850-dis.c (disassemble): Make static. Provide prototype.
2872 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
2874 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
2877 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
2879 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
2880 ']' characters into the output stream.
2881 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
2882 Add "memop" field to all opcodes (for the disassembler).
2883 Reorder opcodes so that "nop" comes before "mov" and "jr"
2884 comes before "jarl".
2886 * v850-dis.c (print_insn_v850): Fix typo in last change.
2888 * v850-dis.c (print_insn_v850): Properly handle disassembling
2889 a two byte insn at the end of a memory region when the memory
2890 region's size is only two byte aligned.
2892 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
2894 * v850-dis.c (v850_reg_names): Define.
2895 (v850_sreg_names, v850_cc_names): Likewise.
2896 (disassemble): Very rough cut at printing operands (unformatted).
2898 * v850-opc.c (BOP_MASK): Fix.
2899 (v850_opcodes): Fix mask for jarl and jr.
2901 * v850-dis.c: New file. Skeleton for disassembler support.
2902 * Makefile.in Remove v850 references, they're not needed here.
2903 * configure.in: Add v850-dis.o when building v850 toolchains.
2904 * configure: Rebuilt.
2905 * disassemble.c (disassembler): Call v850 disassembler.
2907 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
2908 (insert_d8_6, extract_d8_6): New functions.
2909 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
2910 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
2912 (IF4A, IF4B): Use "D7" instead of "D7S".
2913 (IF4C, IF4D): Use "D8_7" instead of "D8".
2914 (IF4E, IF4F): New. Use "D8_6".
2915 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
2916 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
2918 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
2919 (v850_operands): Change D16 to D16_15, use special insert/extract
2920 routines. New new D16 that uses the generic insert/extract code.
2921 (IF7A, IF7B): Use D16_15.
2922 (IF7C, IF7D): New. Use D16.
2923 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
2925 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
2926 message. Issue an error if the branch offset is odd.
2928 * v850-opc.c: Add notes about needing special insert/extract
2929 for all the load/store insns, except "ld.b" and "st.b".
2931 * v850-opc.c (insert_d22, extract_d22): New functions.
2932 (v850_operands): Use insert_d22 and extract_d22 for
2934 (insert_d9): Fix range check.
2936 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
2938 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
2939 and set bits field to D9 and D22 operands.
2941 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
2943 * v850-opc.c (v850_operands): Define SR2 operand.
2944 (v850_opcodes): "ldsr" uses R1,SR2.
2946 * v850-opc.c (v850_opcodes): Fix opcode specs for
2947 sld.w, sst.b, sst.h, sst.w, and nop.
2949 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
2951 * v850-opc.c (v850_opcodes): Add null opcode to mark the
2952 end of the opcode table.
2954 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2956 * d10v-opc.c (pre_defined_registers): Added register pairs,
2957 "r0-r1", "r2-r3", etc.
2959 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
2961 * v850-opc.c (v850_operands): Make I16 be a signed operand.
2962 Create I16U for an unsigned 16bit mmediate operand.
2963 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
2965 * v850-opc.c (v850_operands): Define EP operand.
2966 (IF4A, IF4B, IF4C, IF4D): Use EP.
2968 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
2969 with immediate operand, "movhi". Tweak "ldsr".
2971 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
2972 correct. Get sld.[bhw] and sst.[bhw] closer.
2974 * v850-opc.c (v850_operands): "not" is a two byte insn
2976 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
2978 * v850-opc.c (v850_operands): D16 inserts at offset 16!
2980 * v850-opc.c (two): Get order of words correct.
2982 * v850-opc.c (v850_operands): I16 inserts at offset 16!
2984 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
2985 register source and destination operands.
2986 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
2988 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
2989 same thinko in "trap" opcode.
2991 * v850-opc.c (v850_opcodes): Add initializer for size field
2994 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
2995 Add D8 for 8-bit unsigned field in short load/store insns.
2996 (IF4A, IF4D): These both need two registers.
2997 (IF4C, IF4D): Define. Use 8-bit unsigned field.
2998 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
2999 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3000 for "ldsr" and "stsr".
3001 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3004 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3005 short store word (sst.w).
3007 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3009 * v850-opc.c (v850_operands): Added insert and extract fields,
3010 pointers to functions that handle unusual operand encodings.
3012 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3014 * v850-opc.c (v850_opcodes): Enable "trap".
3016 * v850-opc.c (v850_opcodes): Fix order of displacement
3017 and register for "set1", "clr1", "not1", and "tst1".
3019 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3021 * v850-opc.c (v850_operands): Add "B3" support.
3022 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3025 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3027 * v850-opc.c: Close unterminated comment.
3029 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3031 * v850-opc.c (v850_operands): Add flags field.
3032 (v850_opcodes): add move opcodes.
3034 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3036 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3037 * configure: (bfd_v850v_arch) Add new case.
3038 * configure.in: (bfd_v850_arch) Add new case.
3039 * v850-opc.c: New file.
3041 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3043 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3045 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3047 * d10v-opc.c: Add additional information to the opcode
3048 table to help determinine which instructions can be done
3051 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3053 * mpw-make.sed: Update editing of include pathnames to be
3056 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3058 * arm-opc.h: Added "bx" instruction definition.
3060 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3062 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3064 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3066 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3068 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3070 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3072 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3074 * makefile.vms: Update for alpha-opc changes.
3076 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3078 * i386-dis.c (print_insn_i386): Actually return the correct value.
3079 (ONE, OP_ONE): #ifdef out; not used.
3081 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3083 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3084 Changed subi operand type to treat 0 as 16.
3086 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3088 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3091 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3093 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3094 memory transfer instructions. Add new format string entries %h and %s.
3095 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3098 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3100 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3101 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3103 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3105 * alpha-dis.c (print_insn_alpha_osf): Remove.
3106 (print_insn_alpha_vms): Remove.
3107 (print_insn_alpha): Make globally visible. Chose the register
3108 names based on info->flavour.
3109 * disassemble.c: Always return print_insn_alpha for the alpha.
3111 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3113 * d10v-dis.c (dis_long): Handle unknown opcodes.
3115 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3117 * d10v-opc.c: Changes to support signed and unsigned numbers.
3118 All instructions with the same name that have long and short forms
3119 now end in ".l" or ".s". Divs added.
3120 * d10v-dis.c: Changes to support signed and unsigned numbers.
3122 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3124 * d10v-dis.c: Change all functions to use info->print_address_func.
3126 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3128 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3129 move ccr/sr insns more strict so that the disassembler only
3130 selects them when the addressing mode is data register.
3132 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3133 * d10v-opc.c (pre_defined_registers): Declare.
3134 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3135 to pick a better name for the registers.
3137 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3139 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3140 operands for fexpand and fpmerge. From Christian Kuehnke
3141 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3143 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3145 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3146 print routine. Take new regnames and cpumask arguments.
3147 Kill the environment variable nonsense.
3148 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3149 (print_insn_alpha_vms): New function. Do VMS style regnames.
3150 * disassemble.c (disassembler): Test bfd flavour to pick
3151 between OSF and VMS routines. Default to OSF.
3153 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3155 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3156 * configure: Rebuild.
3157 * Makefile.in (install): Use @INSTALL_SHLIB@.
3159 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3161 * configure: (bfd_d10v_arch) Add new case.
3162 * configure.in: (bfd_d10v_arch) Add new case.
3163 * d10v-dis.c: New file.
3164 * d10v-opc.c: New file.
3165 * disassemble.c (disassembler) Add entry for d10v.
3167 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3169 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3170 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3172 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3174 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3175 distinguish between variants of the instruction set.
3176 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3177 distinguish between variants of the instruction set.
3179 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3181 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3182 the 8086 instruction set.
3183 * i386-dis.c: General cleanups. Make most things static. Add
3184 prototypes. Get rid of static variables aflags and dflags. Pass
3185 them as args (to almost everything).
3187 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3189 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3191 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3193 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3194 if the next arg is marked with SRC_IN_DST. Gross.
3196 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3197 we're looking for and find EXR.
3199 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3200 if we're looking for KBIT and we don't find it.
3202 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3205 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3206 3bit immediate operands.
3208 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3210 * Released binutils 2.7.
3212 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3213 <kkaempf@progis.ac-net.de>.
3215 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3217 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3219 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3221 * sparc-dis.c (print_insn_sparclite): New routine to print
3222 sparclite instructions.
3224 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3226 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3228 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3230 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3231 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3232 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3234 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3236 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3237 Use autoconf-set values.
3238 (docdir, oldincludedir): Removed.
3239 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3241 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3243 * alpha-opc.c: New file.
3244 * alpha-opc.h: Remove.
3245 * alpha-dis.c: Complete rewrite to use new opcode table.
3246 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3247 * configure: Rebuild with autoconf 2.10.
3248 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3249 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3251 (alpha-opc.o): New target.
3253 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3255 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3256 Set imm_added_to_rs1 even if the source and destination register
3259 * sparc-opc.c: Add some two operand forms of the wr instruction.
3261 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3263 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3266 * disassemble.c (disassembler): Handle H8/S.
3267 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3269 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3271 * sparc-opc.c: Add beq/teq as aliases for be/te.
3273 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3274 <sergei@msil.sps.mot.com>.
3276 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3278 * makefile.vms: New file.
3280 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3282 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3284 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3287 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3289 * i386-dis.c (OP_OFF): Call append_prefix.
3291 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3293 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3294 unsigned long to silence a warning from the Solaris PowerPC
3297 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3299 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3301 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3303 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3305 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3306 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3307 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3308 cpush, cpusha, cpull sparclet insns.
3310 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3312 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3314 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3316 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3317 Set F_FLOAT on other floating point instructions.
3319 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3321 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3323 (powerpc_opcodes): Add 860/821 specific SPRs.
3325 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3327 * configure.in: Permit --enable-shared to specify a list of
3328 directories. Set and substitute BFD_PICLIST.
3329 * configure: Rebuild.
3330 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3331 uses. Set to @BFD_PICLIST@.
3333 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3335 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3336 not "abs", which may be needed for the absolute in something
3337 like btst #0,@10:8. Print L_3 immediates separately from other
3338 immediates. Change ABSMOV reference to ABS8MEM.
3340 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3342 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3343 (current_arch_mask): New static global.
3344 (compute_arch_mask): New static function.
3345 (print_insn_sparc): Delete sparc_v9_p. New static local
3346 current_mach. Resort opcode table if current_mach changes.
3347 Generalize "insn not supported" test.
3348 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3349 Delete test for v9/!v9.
3350 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3352 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3353 (brfcx): Renamed to FBRX.
3354 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3355 coprocessor mnemonics are not supported on the sparclet).
3356 (condf): Renamed to CONDF.
3357 (SLCBCC2): Delete F_ALIAS flag.
3359 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3361 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3362 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3364 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3366 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3367 that the shared library version number is set correctly.
3369 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3371 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3372 Miles Bader <miles@gnu.ai.mit.edu>.
3373 * configure: Rebuild.
3375 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3377 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3380 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3382 * configure: Rebuild with autoconf 2.8.
3384 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3386 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3387 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3389 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3391 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3392 since they appear as targets in Makefile.in.
3393 * configure: Rebuild.
3395 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3397 * mpw-make.sed: Edit out shared library support bits.
3399 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3401 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3402 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3403 (sparc_opcodes): Add sparclet insns.
3404 (sparclet_cpreg_table): New static local.
3405 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3406 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3408 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3410 * i386-dis.c (index16): New static variable.
3411 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3413 (OP_indirE): Return result of OP_E.
3414 (OP_E): Check for 16 bit addressing mode, and disassemble
3415 correctly. Optimised 32 bit case a little. Don't print
3416 "(base,index,scale)" when sib specifies only an offset.
3418 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3420 * configure.in: Set and substitute SHLIB_DEP.
3421 * configure: Rebuild.
3422 * Makefile.in (SHLIB_DEP): New variable.
3423 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3424 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3425 COMMON_SHLIB, add them to piclist with appropriate modifications.
3426 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3427 here: just use piclist.
3429 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3431 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3432 (print_insn_sparc): Rewrite v9/not-v9 tests.
3433 (compare_opcodes): Likewise.
3434 * sparc-opc.c (MASK_<ARCH>): Define.
3435 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3436 (sparclet,v6notv9): Define.
3437 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3438 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3440 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3442 * configure.in: Call AC_PROG_CC before configure.host.
3443 * configure: Rebuild.
3445 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3447 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3449 * i386-dis.c (onebyte_has_modrm): New static array.
3450 (twobyte_has_modrm): New static array.
3451 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3453 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3455 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3458 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3460 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3463 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3465 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3466 m68010up, not just m68020up | cpu32.
3468 * Makefile.in (SONAME): New variable.
3469 ($(SHLINK)): Make a link to the transformed name, as well.
3470 (stamp-tshlink): New target.
3471 (install): Skip stamp-tshlink during install.
3473 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3475 * configure.in: Call AC_ARG_PROGRAM.
3476 * configure: Rebuild.
3477 * Makefile.in (program_transform_name): New variable.
3478 (install): Transform library name before installing it.
3480 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3482 * i960-dis.c (mem): Add HX dcinva instruction.
3484 Support for building as a shared library, based on patches from
3485 Alan Modra <alan@spri.levels.unisa.edu.au>:
3486 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3487 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3488 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3489 * configure: Rebuild.
3490 * Makefile.in (ALLLIBS): New variable.
3491 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3492 (COMMON_SHLIB, SHLINK): New variables.
3493 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3494 (STAGESTUFF): Remove variable.
3495 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3496 (stamp-piclist, piclist): New targets.
3497 ($(SHLIB), $(SHLINK)): New targets.
3498 ($(OFILES)): Depend upon stamp-picdir.
3499 (disassemble.o): Build twice if PICFLAG is set.
3500 (MOSTLYCLEAN): Add pic/*.o.
3501 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3502 (distclean): Remove pic and stamp-picdir.
3503 (install): Install shared libraries.
3504 (stamp-picdir): New target.
3506 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3508 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3509 Print unknown instruction as "unknown", rather than in hex.
3511 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3513 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3515 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3517 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3519 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3521 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3522 when necessary. From Ulrich Drepper
3523 <drepper@myware.rz.uni-karlsruhe.de>.
3525 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3527 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3528 sparc_num_opcodes. Update architecture enum values.
3529 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3530 (sparc_opcode_lookup_arch): New function.
3531 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3532 (sparc_opcodes): Add v9a shutdown insn.
3534 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3536 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3537 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3539 (print_insn_sparc64): Deleted.
3540 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3543 * sparc-opc.c (architecture_pname): Add v9a.
3545 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3547 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3548 incorrectly defined as 0x16 when it should be 0x15.
3549 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3550 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3551 excb (exception barrier) which is defined in the Alpha
3552 Architecture Handbook version 2.
3553 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3554 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3555 disassembled as or, for example.
3557 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3559 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3560 (_print_insn_mips): Change i from int to unsigned int.
3562 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3564 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3565 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3567 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3569 * i386-dis.c: Added Pentium Pro instructions.
3571 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3573 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3576 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3578 * sh-opc.h (sh_nibble_type): Added REG_B.
3579 (sh_arg_type): Added A_REG_B.
3580 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3582 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3584 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3586 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3588 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3590 * Makefile.in (distclean): Remove stamp-h. From Ronald
3591 F. Guilmette <rfg@monkeys.com>.
3593 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3595 From David Mosberger-Tang <davidm@azstarnet.com>:
3596 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3599 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3601 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3602 (sh_table): Added many SH3 opcodes.
3603 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3605 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3607 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3608 (subco,subco.): Mark this PPC, not PPCCOM.
3610 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3612 * configure: Rebuild with autoconf 2.7.
3614 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3616 * configure: Rebuild with autoconf 2.6.
3618 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3620 * configure.in: Sort list of architectures. Accept but do nothing
3621 for alliant, convex, pyramid, romp, and tahoe.
3623 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3625 * a29k-dis.c (print_special): Change num to unsigned int.
3627 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3629 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3632 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3634 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3635 * configure: Rebuilt.
3637 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3639 * configure.in: Add case for bfd_i860_arch.
3640 * configure: Rebuild.
3642 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3644 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3645 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3646 (NEXTDOUBLE): Likewise.
3647 (print_insn_m68k): Don't match fmoveml if there is more than one
3648 register in the list.
3649 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3651 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3653 * m68k-opc.c: Use #W rather than #w.
3654 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3656 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3658 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3659 and likewise for all the dbxx opcodes.
3661 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3663 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3665 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3667 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3668 the VR4100 specific instructions to the mips_opcodes structure.
3670 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3672 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3673 ugly Metrowerks bug in CW6, is fixed in CW7.
3675 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3677 * ppc-opc.c (whole file): Add flags for common/any support.
3679 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3681 * Makefile.in (BISON): Remove macro.
3682 (FLAGS_TO_PASS): Remove BISON.
3684 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3686 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3688 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3689 instructions that take no args by looking at the match mask.
3690 (print_insn_arg): Always print "%" before register names.
3691 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3692 [case '_']: Don't print "@#" before address.
3693 [case 'J']: Use "%s" as format string, not register name.
3694 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3696 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3698 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3701 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3703 From David Mosberger-Tang <davidm@azstarnet.com>
3705 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3706 (alpha_insn_set): added definitions for VAX floating point
3707 instructions (Unix compilers don't generate these, but handcoded
3708 assembly might still use them).
3710 * alpha-dis.c (print_insn_alpha): added support for disassembling
3711 the miscellaneous instructions in the Alpha instruction set.
3713 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3715 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3716 no longer create sysdep.h, sed ppc-opc.c to work around a
3717 serious Metrowerks C bug.
3718 * mpw-make.in: Remove.
3719 * mpw-make.sed: New file, used by mpw-configure to edit
3720 Makefile.in into an MPW makefile.
3722 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3724 * Makefile.in (maintainer-clean): New synonym for realclean.
3726 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3728 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3729 which use '0', '1', and '2' instead. Specify the proper size for
3730 a pmove immediate operand. Correct the pmovefd patterns to be
3731 moves to a register, not from a register.
3732 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3734 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3736 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3737 %psr, %wim, %tbr as F_NOTV9.
3739 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3741 * Makefile.in (Makefile): Just rebuild Makefile when running
3743 (config.h, stamp-h): New targets.
3744 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3745 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3746 rebuilding config.h.
3747 * configure: Rebuild.
3749 * mips-opc.c: Change unaligned loads and stores with "t,A"
3750 operands to use "t,A(b)".
3752 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3754 * sh-dis.c (print_insn_shx): Add F_FR0 support.
3756 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3758 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
3759 until 3 instead of until 2.
3761 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
3763 * Makefile.in (ALL_CFLAGS): Define.
3764 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
3765 (MOSTLYCLEAN): Add config.log.
3766 (distclean): Don't remove config.log.
3767 * configure.in: Substitute HDEFINES.
3768 * configure: Rebuild.
3770 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3772 * sh-opc.h (sh_arg_type): Add F_FR0.
3773 (sh_table, case fmac): Add F_FR0 as first argument.
3775 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3777 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
3779 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
3781 * sparc-dis.c: Remove all references to NO_V9.
3783 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
3785 * aclocal.m4: Just include ../bfd/aclocal.m4.
3786 * configure: Rebuild.
3788 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
3790 * sparc-dis.c (X_DISP19): Define.
3791 (print_insn, case 'G'): Use it.
3792 (print_insn, case 'L'): Sign extend displacement.
3794 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
3796 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
3797 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
3798 host_makefile_frag or frags.
3799 * aclocal.m4: New file.
3800 * configure: Rebuild.
3801 * Makefile.in (INSTALL): Set to @INSTALL@.
3802 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
3803 (INSTALL_DATA): Set to @INSTALL_DATA@.
3805 (AR_FLAGS): Set to rc rather than qc.
3806 (CC): Define as @CC@.
3807 (CFLAGS): Set to @CFLAGS@.
3808 (@host_makefile_frag@): Remove.
3809 (config.status): Remove dependency upon @frags@.
3811 * configure.in: ../bfd/config.bfd now just sets shell variables.
3812 Use them rather than looking through target Makefile fragments.
3813 * configure: Rebuild.
3815 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3817 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
3819 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
3821 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
3822 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
3825 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
3826 (lookup_{name,value}): New functions.
3827 (prefetch_table): New static local.
3828 (sparc_{encode,decode}_prefetch): New functions.
3829 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
3831 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3833 * sh-opc.h: Add blank lines to improve readabililty of sh3e
3836 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3838 * sh-dis.c: Correct comment on first line of file.
3840 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
3842 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
3844 * sparc-opc.c (asi, membar): New static locals.
3845 (sparc_{encode,decode}_{asi,membar}): New functions.
3846 (sparc_opcodes, membar insn): Fix.
3847 * sparc-dis.c (print_insn): Call sparc_decode_asi.
3848 Support decoding of membar masks.
3851 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
3853 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
3855 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
3857 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
3858 and likewise for the other branches. Add bhs as an alias for bcc,
3859 and likewise for the size variants. Add dbhs as an alias for
3862 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
3864 * sh-opc.h (FP sts instructions): Update to match reality.
3866 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
3868 * m68k-dis.c: (fpcr_names): Add % before all register names.
3869 (reg_names): Likewise.
3870 (print_insn_arg): Don't explicitly print % before register names.
3871 Add % before register names in static array names. In case 'r',
3872 print data registers as `@(Dn)', not `Dn@'. When printing a
3873 memory address, don't print @# before it.
3874 (print_indexed): Change base_disp and outer_disp from int to
3875 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
3876 syntax. Sign extend 8 byte displacement correctly.
3877 (print_base): Print using MIT syntax. Print zpc when appropriate.
3878 Change parameter disp from int to bfd_vma.
3880 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
3883 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
3885 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
3886 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
3887 * sh-opc.h (sh_arg_type): Add new operand types.
3888 (sh_table): Add new opcodes from SH3E Floating Point ISA.
3890 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3892 * Makefile.in (distclean): Remove generated file config.h.
3894 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
3896 * Makefile.in (distclean): Remove generated file config.h.
3898 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
3900 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
3902 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
3904 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
3905 rather than numopcodes. Use m68k_opcodes rather than removed
3906 opcode function. Don't check F_ALIAS.
3907 (print_insn_arg): Change first parameter to be const char *.
3908 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
3909 (m68k-opc.o): New target.
3910 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
3911 * configure: Rebuild.
3913 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
3915 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
3916 (opcode_bits, opcode_hash_table): New variables.
3917 (opcodes_initialized): Renamed from opcodes_sorted.
3918 (build_hash_table): New function.
3919 (is_delayed_branch): Use hash table.
3920 (print_insn): Renamed from print_insn_sparc, made static.
3921 Build and use hash table. If !sparc64, ignore sparc64 insns,
3922 and vice-versa if sparc64.
3923 (print_insn_sparc, print_insn_sparc64): New functions.
3924 (compare_opcodes): Move sparc64 opcodes to end.
3925 Print commutative insns with constant second.
3926 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
3928 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
3930 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
3931 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
3932 avoids printing a delay slot in a delay slot.
3933 * sh-opc.h (sh_table): Fully bracket last entry.
3935 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
3937 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
3939 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
3941 * configure.in: Get host_makefile_frag from ${srcdir}.
3943 * configure.in: Autoconfiscated. Check for string[s].h. Create
3944 config.h from config.in. Don't set up sysdep.h link.
3945 * sysdep.h: New file.
3946 * configure, config.in: New files, generated from configure.in.
3947 * Makefile.in: Updated to be processed autoconf-style.
3948 (distclean): Keep sysdep.h. Remove config.log and config.cache.
3949 (Makefile): Depend on config.status.
3950 (config.status): New rule.
3951 * configure.bat: Update Makefile substitutions.
3953 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
3955 * mips-opc.c (L1): Define.
3956 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
3957 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
3960 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
3962 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
3963 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
3964 have multiple add units but only a single logical unit.
3966 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
3967 shifted by 18, without any insertion or extraction function.
3968 (insert_cr, extract_cr): Remove.
3970 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
3972 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
3975 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
3977 * mpw-config.in: Add sh and i386 configs, remove sparc config.
3978 * sh-opc.h: Add copyright.
3980 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
3982 * Makefile.in (crunch-m68k): Delete extra target accidentally
3983 checked in a while ago.
3985 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3987 * sh-opc.h (sh_table): Add SH3 support.
3989 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
3991 * sh-opc.h: Added bsrf and braf.
3993 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
3995 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
3996 bogus [ls]fm{ea,fd} patterns.
3998 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
3999 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4000 initialize it from memory. Make function static.
4001 (print_insn_{big,little}_arm): New functions.
4002 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4003 the correct endianness.
4005 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4007 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4010 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4012 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4013 17th, so that it builds again using GCC as the compiler.
4015 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4017 * mips-dis.c (print_insn_little_mips): Cast return value from
4018 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4019 expects an unsigned long, and that might be fewer words of
4020 argument storage (e.g., if bfd_vma is long long on a 32-bit
4022 (print_insn_big_mips): Likewise with bfd_getb32 value.
4023 (_print_insn_mips): Now static.
4025 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4027 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4028 gcc memory hog problem with initializer is fixed.
4030 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4032 Merge in support for Mac MPW as a host.
4033 (Old change descriptions retained for informational value.)
4035 * mpw-config.in (archname): Compute from the config.
4036 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4038 * mpw-config.in (target_arch): Compute from canonical target.
4039 (m68k, mips, powerpc, sparc): Add architectures.
4040 * mpw-make.in (disassemble.c.o): Add.
4041 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4043 * mpw-config.in (BFD_MACHINES): Set to a default value.
4044 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4046 * mpw-make.in (CSEARCH): Add extra-include to search path.
4048 * mpw-config.in (varargs.h): Don't create.
4049 (sysdep.h): Create using forward-include.
4050 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4052 * mpw-config.in: New file, MPW version of configure.in.
4053 * mpw-make.in: New file, MPW version of Makefile.in.
4055 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4057 * alpha-dis.c (print_insn_alpha): Put empty statement after
4060 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4062 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4063 (low_sign_extend): Likewise.
4064 (get_field): Delete unused function.
4065 (set_field, deposit_14, deposit_21): Likewise.
4067 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4069 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4072 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4074 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4076 * alpha-opc.h (OSF_ASMCODE): define
4077 print pal-code names as defined in App C of the
4078 Alpha Architecture Reference Manual
4080 * alpha-dis.c: cleaned up output
4081 print stylized code forms as defined in App A.4.3 of the
4082 Alpha Architecture Reference Manual
4084 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4086 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4088 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4091 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4093 * m68k-dis.c (opcode): New function. Returns address of opcode
4094 table entry given index, even if the opcode table was split to
4095 work around gcc bugs.
4096 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4098 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4099 (reg_names): Now const.
4100 (print_insn_arg): Arrays cacheFieldName and names now const.
4101 (print_indexed): Array scales now const.
4103 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4105 * ppc-opc.c: Sort recently added instructions by minor opcode
4106 number within major opcode number.
4108 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4110 * hppa-dis.c: Include libhppa.h.
4112 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4114 * mips-opc.c: Change dli to use M_DLI, and add dla.
4116 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4118 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4120 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4122 * mips-opc.c: Add r4650 mul instruction.
4124 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4126 * mips-opc.c: Add uld and usd macros for unaligned double load and
4129 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4131 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4132 mfdcr, mtdcr, icbt, iccci.
4134 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4136 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4137 signed char fields to shorts, more portable.
4139 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4141 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4142 char fields as signed chars, since they may have negative values.
4144 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4146 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4147 (mycroft@netbsd.org).
4149 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4151 From "Logg, Ed" <elogg@ea.com>:
4152 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4153 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4156 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4158 * ppc-opc.c: Changes based on patch from David Edelsohn
4159 <edelsohn@mhpcc.edu>.
4160 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4163 (insert_tbr): New static function.
4164 (extract_tbr): New static function.
4165 (XFXFXM_MASK, XFXM): Define.
4166 (XSPRBAT_MASK, XSPRG_MASK): Define.
4167 (powerpc_opcodes): Add instructions to access special registers by
4168 name. Add mtcr and mftbu.
4170 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4172 * mips-opc.c (P3): Define.
4173 (mips_opcodes): Add mad and madu.
4175 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4177 * configure.in: Add W65 support.
4178 * disassemble.c: Likewise.
4179 * w65-opc.h, w65-dis.c: New files.
4181 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4183 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4186 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4188 * mips-opc.c: Add dli as a synonym for li.
4190 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4192 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4193 print something for reserved opcode values, even if it won't
4196 * mips-dis.c (_print_insn_mips): When initializing, shift right
4197 and mask, to avoid sign extension problems on the Alpha.
4199 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4202 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4204 * sh-opc.h (mov.l gbr): Get direction right.
4205 * sh-dis.c (print_insn_shx): New function.
4206 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4207 print opcodes with right byte order.
4209 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4211 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4212 to avoid conflicts with getopt.
4214 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4216 * hppa-dis.c (print_insn_hppa): Read the instruction using
4217 bfd_getb32, so that it works on a little endian or 64 bit host.
4218 Remove unused local variable op.
4220 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4222 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4223 addu does not work correctly if -mips3.
4225 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4227 * a29k-dis.c (print_special): Add special register names defined
4228 on 29030, 29040 and 29050.
4229 (print_insn): Handle new operand type 'I'.
4231 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4233 * Makefile.in (INSTALL): Use top level install.sh script.
4235 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4237 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4238 that it works on a little endian host.
4240 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4242 * configure.in: Use ${config_shell} when running config.bfd.
4244 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4246 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4248 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4250 * a29k-dis.c (print_insn): Print the opcode.
4252 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4254 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4256 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4258 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4260 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4262 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4263 which store a value into memory.
4265 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4267 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4268 * arm-dis.c, arm-opc.h: New files.
4270 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4272 * Makefile.in (ns32k-dis.o): Add dependency.
4273 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4274 string, not as array of chars.
4276 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4278 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4280 * sparc-opc.c: Added sparclite extended FP operations, and
4281 versions of v9 impdep* instructions permitting specification of
4284 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4286 * i960-dis.c (reg_names): Now const.
4287 (struct sparse_tabent): New type, copied from array type in mem
4289 (ctrl): Local static array ctrl_tab now const.
4290 (cobr): Local static array cobr_tab now const.
4291 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4292 static variable mem_tab no longer explicitly initialized. Changed
4293 mem_init to const array of struct sparse_tabent.
4294 (reg): Local static variable reg_tab no longer explicitly
4295 initialized. Changed reg_init to const array of struct
4297 (ea): Local static array scale_tab now const.
4299 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4302 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4304 * configure.bat: the disassember needs to be enabled for
4305 "objdump -d" to work in djgpp.
4307 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4309 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4310 (invalid_float): Enabled general version, doesn't require running
4311 on ns32k host. Changed to take char* argument, and test for
4312 explicitly specified sizes, instead of using sizeof() on host CPU
4314 (INVALID_FLOAT): Cast first argument.
4315 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4316 list_P032, list_M032): Now const.
4317 (optlist, list_search): Made appropriate arguments now point to
4319 (print_insn_arg): Changed static array of one-character-string
4320 pointers into a static const array of characters; fixed sprintf
4321 statement accordingly.
4323 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4325 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4326 from distribution. A ns32k-dis.c from a previous distribution has
4327 been brought up to date and supports the new interface.
4329 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4331 * configure.in: add bfd_ns32k_arch target support.
4333 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4334 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4336 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4338 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4341 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4343 * h8300-dis.c, mips-dis.c: Don't use true and false.
4345 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4347 * configure.in: Change --with-targets to --enable-targets.
4349 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4351 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4352 opcodes to the first instruction with that opcode, to speed
4353 disassembly of large files. From ralphc@pyramid.com (Ralph
4356 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4358 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4360 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4362 * configure.bat: update to latest makefile.in
4364 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4366 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4367 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4368 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4369 slot insn is in a delay slot.
4370 * z8k-opc.h: (resflg): Fix patterns.
4371 * h8500-opc.h Fix CR insn patterns.
4373 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4375 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4376 "cmpl" before POWER versions, so that gas -many uses them.
4378 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4380 * disassemble.c: New file.
4381 * Makefile.in (OFILES): Add disassemble.o.
4382 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4383 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4384 binutils/configure.in.
4386 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4387 opcode being examined.
4389 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4391 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4392 (insert_ral, insert_ram, insert_ras): New functions.
4393 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4394 RAS for store with update.
4396 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4398 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4399 (edelsohn@npac.syr.edu).
4401 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4403 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4406 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4408 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4410 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4412 * ppc-opc.c (powerpc_operands): The signedp field has been
4413 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4414 instead. Add new operand SISIGNOPT.
4415 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4416 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4417 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4420 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4422 * i386-dis.c (struct private): Renamed to dis_private. `private'
4423 is a reserved word for dynix cc.
4425 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4427 * configure.in: Change error message to refer to bfd/config.bfd
4428 rather than bfd/configure.in.
4430 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4432 * ppc-opc.c: Define POWER2 as short alias flag.
4433 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4436 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4438 * i960-dis.c (print_insn_i960): Don't read a second word for
4439 opcodes 0, 1, 2 and 3.
4441 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4443 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4445 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4447 * m68881-ext.c: Removed; no longer used.
4448 * Makefile.in: Changed accordingly.
4450 * m68k-dis.c (ext_format_68881): Don't declare.
4451 (print_insn_m68k): If an instruction uses place 'i', it uses at
4452 least four fixed bytes.
4453 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4454 extended float, convert to double using floatformat_to_double, not
4455 ieee_extended_to_double, and fetch the data before converting it.
4457 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4459 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4460 davidj@ICSI.Berkeley.EDU (David Johnson).
4462 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4464 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4465 PowerPC uses bdnz[l][a].
4467 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4469 * dis-buf.c, i386-dis.c: Include sysdep.h.
4471 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4473 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4475 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4476 by Motorola PowerPC 601 with PPC_OPCODE_601.
4477 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4478 Disassemble Motorola PowerPC 601 instructions as well as normal
4479 PowerPC instructions.
4481 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4483 * i960-dis.c (reg, mem): Just use a static array instead of
4486 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4488 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4489 condition name index if this is for a negated condition.
4491 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4492 Floating point format for 'H' operand is backwards from normal
4493 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4494 operands (fmpyadd and fmpysub), handle bizarre register
4495 translation correctly for single precision format.
4497 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4498 or 'I' operands if the next format specifier is 'M' (fcmp
4499 condition completer).
4501 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4503 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4504 single number giving a bitmask for the MB and ME fields of an M
4505 form instruction. Change NB to accept 32, and turn it into 0;
4506 also turn 0 into 32 when disassembling. Seperated SH from NB.
4507 (insert_mbe, extract_mbe): New functions.
4508 (insert_nb, extract_nb): New functions.
4509 (SC_MASK): Mask out SA and LK bits.
4510 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4511 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4512 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4513 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4514 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4515 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4516 (powerpc_macros): Define table of macro definitions.
4517 (powerpc_num_macros): Define.
4519 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4520 if PPC_OPERAND_NEXT is set.
4522 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4524 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4525 char. Retrieve contents using bfd_getl32 instead of shifting.
4527 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4529 * ppc-opc.c: New file. Opcode table for PowerPC, including
4530 opcodes for POWER (RS/6000).
4531 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4532 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4533 (CFILES): Add ppc-dis.c.
4534 (ppc-dis.o, ppc-opc.o): New targets.
4535 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4537 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4539 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4540 No space before 'u', 'f', or 'N'.
4542 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4544 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4545 farther than we should.
4547 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4549 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4551 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4553 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4555 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4556 needs it, to prevent reading past the end of a section.
4558 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4560 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4561 Removed t,A case for la; always use t,A(b) case.
4563 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4565 From Ted Lemen <mellon@pepper.ncd.com>
4566 * mips-dis.c (print_insn_arg): Handle 'k'.
4567 * mips-opc.c: Make cache use k, not t.
4569 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4571 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4572 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4573 FLOAT_FORMAT_CODE to put out floating point register names.
4575 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4577 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4579 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4581 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4583 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4585 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4586 larger than 32. Moved dsxx32 variants first for disassembler.
4588 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4590 * z8kgen.c, z8k-opc.h: Add full lda information.
4592 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4594 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4595 movb instructions. Any necessary space will be emitted by
4596 the code to handle nullification completers.
4598 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4600 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4602 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4604 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4605 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4607 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4609 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4611 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4613 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4614 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4616 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4618 * m88k-dis.c (m88kdis): comment change. Remove space after
4620 (printop): handle new arg types DEC and XREG for m88110.
4622 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4624 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4625 type for absolute branch addresses. Delete special
4626 "ble" and "be" code in 'W' operand code.
4628 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4630 * mips-opc.c: Set hazard information correctly for branch
4631 likely instructions.
4633 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4635 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4636 info->fprintf_func for printing and info->print_address_func for
4639 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4641 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4643 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4645 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4646 Corrected second case of "b" for disassembler.
4648 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4650 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4651 to BFD swapping routines to correspond to BFD name changes.
4653 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4655 * mips-opc.c: Change div machine instruction to be z,s,t rather
4656 than s,t. Change div macro to be d,v,t rather than d,s,t.
4657 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4658 rem and remu which generates only the corresponding div
4659 instruction. This is for compatibility with the MIPS assembler,
4660 which only generates the simple machine instruction when an
4661 explicit destination of $0 is used.
4662 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4664 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4666 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4667 WR_31 hazard for bal, bgezal, bltzal.
4669 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4671 * hppa-dis.c (print_insn_hppa): Use print function
4672 from within the disassemble_info, not fprintf_filtered.
4674 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4676 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4677 Law, law@cs.utah.edu.)
4679 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4681 * mips-opc.c ("absu"): Removed.
4684 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4686 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4687 Changed hazard information to distinguish between memory load
4688 delays and coprocessor load delays.
4690 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4692 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4694 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4696 * configure.in: Don't pass cpu to config.bfd.
4698 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4700 * m88k-dis.c (m88kdis): Make class unsigned.
4702 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4704 * alpha-dis.c (print_insn_alpha): One branch format case was
4705 missing the instruction name.
4707 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4709 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4710 Add the arch-specific auxiliary files.
4711 (OFILES): Remove the arch-specific auxiliary files
4712 and use BFD_MACHINES instead of DIS_LIBS.
4713 * configure.in: Set BFD_MACHINES based on --with-targets option.
4715 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4717 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4720 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4722 * sparc-opc.c: Change CONST to const to deal with gcc
4723 -Dconst=__const -traditional.
4725 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4727 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4728 coprocessor instructions out of #if 0, and made them use new
4731 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4733 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4735 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4737 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4738 instruction, for use by the disassembler.
4740 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4741 hand-coded sign extensions that depended on 32-bit host ints.
4742 FIXME, we still depend on big-endian host bitfield ordering.
4743 (sparc_print_insn): Set the insn_info_valid field, and the
4744 other fields that describe the instruction being printed.
4746 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4748 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4749 `jmp' instead of just one of them.
4751 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4753 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4754 (fput_fp_reg_r): Renamed from fput_reg_r.
4755 (fput_fp_reg): New function.
4756 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
4758 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
4760 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
4762 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4764 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
4766 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
4767 don't output a space.
4769 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
4771 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
4773 * mips-opc.c: New file, containing opcode table from
4774 ../include/opcode/mips.h.
4775 * Makefile.in: Add it.
4777 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4779 * m88k-dis.c: New file, moved in from gdb and changed to use the
4780 new dis-asm.h disassembler interface.
4781 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
4782 (m88k-dis.o): New target.
4784 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
4786 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
4787 argument string const char * to correspond to opcode/mips.h.
4789 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
4791 * mips-dis.c: Updated to account for name changes in new version
4793 * Makefile.in: Added header file dependencies.
4795 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
4797 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
4799 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4801 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
4802 extend, rather than shifts.
4804 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
4806 * Makefile.in: Undo 15 June change.
4808 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
4810 * m68k-dis.c (print_insn_arg): Change return value to byte count
4812 * m68k-dis.c: Re-write to detect invalid operands before
4813 printing anything, so we can handle this the same way we
4814 handle invalid opcodes.
4816 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4818 * sh-dis.c, sh-opc.h: Understand some more opcodes.
4820 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
4822 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
4825 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4827 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
4829 * configure.in: Do make sysdep.h link.
4830 * Makefile.in: Search ../include. Don't search ../bfd.
4832 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
4834 Changes from Jeff Law, law@cs.utah.edu:
4835 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
4836 Do not print a space before the completers specified by
4839 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
4841 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
4842 defined, since gdb has been fixed.
4844 Changes from Jeff Law, law@cs.utah.edu:
4845 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
4846 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
4847 be a *disassemble_info, not a *FILE.
4848 * hppa-dis.c: Support 'd', '!', and 'a'.
4849 * hppa-dis.c: Support 's' to extract a 2 bit space register.
4850 * hppa-dis.c: Delete cases which are no longer needed.
4852 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
4854 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
4856 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4858 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
4861 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
4863 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
4864 * configure.in: No longer need to configure to get sysdep.h.
4866 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
4868 * Patches from Jeffrey Law <law@cs.utah.edu>.
4869 * hppa-dis.c: Support 'I', 'J', and 'K' in output
4870 templates for 1.1 FP computational instructions.
4872 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4874 * h8500-dis.c (print_insn_h8500): Address argument is type
4876 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
4879 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
4880 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
4882 * sparc-dis.c (compare_opcodes): Move static declaration to
4885 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4887 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
4888 instruction, remove unimp hack from 'l' argument.
4890 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
4892 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
4895 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
4897 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
4898 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
4901 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4903 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
4904 arrays of string pointers to 2-d arrays of chars, to save
4907 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
4909 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
4910 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
4912 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4914 * hppa-dis.c: New file from Utah, adapted to new disassembler
4916 * Makefile.in: Include it.
4918 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4920 * sh-dis.c, sh-opc.h: New files.
4922 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4924 * alpha-dis.c, alpha-opc.h: New files.
4926 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4928 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
4931 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
4933 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
4935 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
4937 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
4940 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
4942 * sparc-dis.c: Use fprintf_func a few places where I forgot,
4943 and double percent signs a few places.
4945 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
4947 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
4948 Use info->print_address_func not print_address.
4950 * dis-buf.c (generic_print_address): New function.
4952 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4954 * Makefile.in: Add sparc-dis.c.
4955 sparc-dis.c: New file, merges binutils and gdb versions as follows:
4957 Add `add' instruction to the set that get checked
4958 for a preceding `sethi' in order to print an absolute address.
4959 * (print_insn): Disassembly prefers real instructions.
4960 (is_delayed_branch): Speed up.
4961 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
4962 Still missing some float ops, and needs testing.
4963 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
4964 F_ALIAS. Use printf, not fprintf, when not passing a file
4966 (compare_opcodes): Check that identical instructions have
4967 identical opcodes, complain otherwise.
4970 * Include reg_names.
4972 Use dis-asm.h/read_memory_func interface.
4974 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
4976 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
4977 deliberately return non-zero to setjmp from longjmp. Otherwise
4978 this code fails to compile.
4980 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
4982 * m68k-dis.c: Fix prototype for fetch_arg().
4984 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4986 * dis-buf.c: New file, for new read_memory_func interface.
4987 Makefile.in (OFILES): Include it.
4988 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
4989 Use new read_memory_func interface.
4991 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
4993 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
4994 * h8500-opc.h: Fix couple of opcodes.
4996 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
4998 * Makefile.in: add dvi & installcheck targets
5000 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5002 * Makefile.in: Update for h8500-dis.c.
5004 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5006 * h8500-dis.c, h8500-opc.h: New files
5008 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5010 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5011 ../include/dis-asm.h.
5012 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5013 and ../gdb/m68k-pinsn.c).
5014 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5015 and ../gdb/i386-pinsn.c).
5016 * m68881-ext.c: New file. Moved definition of
5017 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5018 * Makefile.in: Adjust for new files.
5019 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5020 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5021 can be dis-assembled.
5023 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5025 * mips-dis.c (print_insn_arg): Now returns void.
5027 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5029 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5030 files that use the macros.
5032 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5034 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5035 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5036 (CFILES): Added mips-dis.c.
5038 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5040 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5041 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5043 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5045 * Makefile.in: Improve *clean rules.
5046 * configure.in: Allow a default host.
5048 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5050 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5051 files include other sysdep files
5053 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5055 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5057 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5059 * configure.in: For host support, use ../bfd/configure.host
5060 so it stays in sync with the ../bfd/hosts database.
5062 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5064 * configure.in: use cpu-vendor-os triple instead of nested cases
5066 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5068 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5069 *always* the wrong one.
5071 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5073 * z8kgen.c: added copyright info
5075 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5077 * z8k-dis.c (unparse_instr): prettier tabs
5078 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5080 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5082 * configure.in: Add ncr* configuration.
5083 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5084 picayune ANSI compilers happy.
5086 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5088 * configure.in (i386): Make i386 and i486 synonymous for now.
5089 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5091 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5093 * Makefile.in (install): Fix typo.
5095 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5097 * Makefile.in (make): Remove obsolete crud.
5098 (sparc-opc.o): Avoid Sun Make VPATH bug.
5100 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5102 * Makefile.in: since there are no SUBDIRS, remove rule and
5103 references of subdir_do.
5105 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5107 * Makefile.in (install): Get the library name right here too.
5108 Don't install bfd.h, since it's unrelated to this library. No
5109 subdirs to recurse into, either.
5110 (CFILES): The source file has a .c suffix, not .o.
5112 * sparc-opc.c: New file, moved from BFD.
5113 * Makefile.in (OFILES): Build it.
5115 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5117 * z8k-dis.c: fixed forward refferences of some declarations.
5119 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5121 * Makefile.in: get the name of the library right
5123 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5125 * z8k-dis.c: knows how to disassemble z8k stuff
5126 * z8k-opc.h: new file full of z8000 opcodes
5130 version-control: never