1 Tue Dec 8 13:56:18 1998 David Taylor <taylor@texas.cygnus.com>
3 * dis-buf.c (generic_strcat_address): reformat to GNU coding
4 conventions. change sprintf call to an sprintf_vma call.
7 Tue Dec 8 13:12:44 1998 Dave Brolley <brolley@cygnus.com>
9 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
12 Tue Dec 8 10:50:46 1998 David Taylor <taylor@texas.cygnus.com>
14 The following changes were made by
15 Elena Zannoni <ezannoni@kwikemart.cygnus.com>,
16 David Taylor <taylor@texas.cygnus.com>, and
17 Edith Epstein <eepstein@sophia.cygnus.com> as part of a project to
18 merge in changes by HP; HP did not create ChangeLog entries.
20 * dis-buf.c (generic_strcat_address): new function.
22 * hppa-dis.c: Changes to improve hppa disassembly.
23 Changed formatting in : reg_names, fp_reg_names,control_reg,
24 New variables : sign_extension_names, deposit_names, conversion_names
25 float_test_names, compare_cond_names_double, add_cond_names_double,
26 logical_cond_names_double, unit_cond_names_double,
27 branch_push_pop_names, saturation_names, shift_names, mix_names,
28 New Macros : GET_COMPL_O, GET_PUSH_POP,MERGED_REG
29 Move some definitions to libhppa.h: GET_FIELD, GET_BIT
30 (fput_const): renamed as fput_hex_const
32 - use the macros fputs_filtered and
33 fput_decimal_const whenever possible; calls to sign_extend require
34 2 params -- add a missing second param of 0.
35 - Some new code ifdefed for LOCAL_ONLY, all related to figuring out
36 architecture version number of current machine. HP folks are
37 trying to handle situation where the target program was compiled
38 for PA 1.x (32-bit), but is running on a PA 2.0 machine and
40 - added new cases : 'g', 'B', 'm'
41 - added cases specifically for PA 2.0
42 - changed the following cases : '"', 'n', 'N', 'p', 'Z',
43 - calls to fput_const become calls to fput_hex_const
45 1998-12-07 James E Wilson <wilson@wilson-pc.cygnus.com>
47 * Makefile.am (CFILES): Add i960c-asm, i960c-dis.c, i960c-opc.c.
48 (ALL_MACHINES): Add i960c-asm.lo, i960c-dis.lo, i960-opc.lo.
50 (CLEANFILES): Add stamp-i960.
52 (i960c-opc.h, i960c-opc.c, i960c-asm.c, i960c-dis.c, stamp-i960):
55 (i960-asm.lo, i960c-dis.lo, i960c-opc.lo): New Makefile rules.
56 * Makefile.in: Rebuilt.
57 * configure.in (bfd_i960_arch): Add i960c-opc.lo, i960-asm.o,
59 * i960-dis.c (print_insn_i960): Rename to print_insn_i960_orig.
60 * i960c-asm.c, i960c-dis.c, i960c-opc.c, i960c-opc.h: New files.
63 Mon Dec 7 14:33:44 1998 Dave Brolley <brolley@cygnus.com>
65 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
68 Sun Dec 6 14:06:48 1998 Ian Lance Taylor <ian@cygnus.com>
70 * mips-opc.c (mips_builtin_opcodes): Add dmfc2 and dmtc2.
72 * ppc-opc.c (powerpc_opcodes): Add PowerPC403 GC[X] instructions.
73 From Saitoh Masanobu <msaitoh@spa.is.uec.ac.jp>.
76 Fri Dec 4 17:45:51 1998 Doug Evans <devans@canuck.cygnus.com>
78 * fr30-opc.c: Regenerate.
80 Fri Dec 4 17:08:08 1998 Dave Brolley <brolley@cygnus.com>
82 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
84 Thu Dec 3 14:26:20 1998 Dave Brolley <brolley@cygnus.com>
86 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
88 Thu Dec 3 00:09:17 1998 Doug Evans <devans@canuck.cygnus.com>
90 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerate.
93 1998-11-30 Doug Evans <devans@casey.cygnus.com>
95 * cgen-dis.c (hash_insn_array): CGEN_INSN_VALUE ->
98 * cgen-asm.in (insert_normal): Change start,length to unsigned int.
99 New args word_offset, word_length. Rewrite.
101 (insert_1): Fix lsb0 case.
102 * cgen-dis.in (extract_normal): Change start,length to unsigned int.
103 New args word_offset, word_length. Rewrite.
105 (extract_1): Fix lsb0 case.
106 * cgen-opc.in (FLD): Define.
108 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
110 * fr30-opc.c,fr30-opc.h,fr30-asm.c,fr30-dis.c: Regenerate.
113 start-sanitize-cygnus
114 Mon Nov 30 11:52:44 1998 Doug Evans <devans@canuck.cygnus.com>
116 * Makefile.am (CGENFILES): Add rtx-funcs.scm.
117 * Makefile.in: Rebuild.
121 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
123 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
125 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
127 * fr30-asm.c,fr30-dis.c: Regenerated.
129 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
131 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
133 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
135 * fr30-opc.c: Regenerated.
137 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
139 * fr30-opc.c: Regenerated.
140 * fr30-opc.h: Regenerated.
141 * fr30-dis.c: Regenerated.
142 * fr30-asm.c: Regenerated.
145 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
147 * mips-opc.c (sync.p,sync.l): Swap insn values.
150 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
152 * fr30-opc.c: Regenerate.
154 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
156 * fr30-opc.c: Regenerated.
157 * fr30-opc.h: Regenerated.
160 1998-11-18 Doug Evans <devans@casey.cygnus.com>
162 start-sanitize-cygnus
163 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
164 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
166 (insert_insn_normal): Fix typo.
167 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
168 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
169 Rewrite ! CGEN_INT_INSN_P case.
170 (extract_insn_normal): Ditto.
171 (extract_1): New arg `pc'. All callers updated.
172 Replace calls to bfd_getb8.
173 (fill_cache): New fn.
174 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
175 * cgen-opc.in: ... from here.
176 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
178 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
180 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
184 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
186 * fr30-opc.c: Regenerated.
188 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
190 * fr30-opc.c: Regenerated.
191 * fr30-opc.h: Regenerated.
192 * fr30-dis.c: Regenerated.
193 * fr30-asm.c: Regenerated.
195 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
197 * po/opcodes.pot: Regenerated.
198 * fr30-opc.c: Regenerated.
199 * fr30-opc.h: Regenerated.
200 * fr30-dis.c: Regenerated.
201 * fr30-asm.c: Regenerated.
203 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
205 * disassemble.c (disassembler): Add support for FR30 target.
208 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
210 start-sanitize-cygnus
211 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
212 CGEN_OPERAND_SEM_ONLY.
214 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
216 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
218 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
220 * po/opcodes.pot: Regenerate.
221 * po/POTFILES.in: Regenerate.
222 * fr30-opc.c: Regenerate.
223 * fr30-opc.h: Regenerate.
225 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
227 * m32r-asm.c: Regenerate.
230 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
232 * configure.in: Added case for bfd_fr30_arch.
233 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
234 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
235 (CLEANFILES): Added stamp-fr30.
237 * fr30-asm.c: New file.
238 * fr30-dis.c: New file.
239 * fr30-opc.c: New file.
240 * fr30-opc.h: New file.
241 * po/POTFILES.in: Regenerated
242 * po/opcodes.pot: Regenerated
246 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
248 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
249 to bcl8,bncl8 entries.
250 (macro_insn_table_entries): Add FILL_SLOT attribute
251 to bcl8r,bncl8r entries.
254 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
256 * configure.in: detect cygwin* instead of cygwin32*
257 * configure: regenerate
259 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
261 * mips-opc.c (IS_M): Added.
264 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
266 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
270 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
272 start-sanitize-cygnus
273 * cgen-asm.in (insert_1): New function.
274 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
275 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
276 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
277 * cgen-dis.in (extract_1): New function.
278 (extract_normal): buf_ctrl renamed to ex_info, update type.
279 Progress on handling of CGEN_INT_INSN_P.
280 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
281 Update handling of CGEN_INT_INSN_P. Handle errors from
282 @arch@_cgen_extract_operand.
283 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
284 (default_print_insn): Renamed from print_insn.
285 Handle ! CGEN_INT_INSN_P.
286 (print_insn_@arch@): Handle error returns from print_insn.
287 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
288 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
289 (@arch@_cgen_lookup_get_insn_operands): Ditto.
291 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
294 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
296 * m10300-opc.c: Allow autoincrement stores using the same register
297 for source and destination operands.
299 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
301 * m10300-opc.c: DSP instrutions which only write to one general
302 register have no restrictions on matching operands.
304 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
307 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
309 * m32r-opc.h,m32r-opc.c: Regenerate.
312 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
314 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
317 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
319 * i386-dis.c (OP_3DNowSuffix): New static function.
322 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
323 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
324 (insn_codep): New static variable.
325 (print_insn_x86): Init insn_codep after prefixes.
326 (grps): Add GRP14 entries for prefetch, prefetchw.
329 From Jeff B Epler <jepler@usgs.gov>
330 * i386-dis.c (Suffix3DNow): New table.
332 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
334 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
336 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
338 * d10v-dis.c (print_operand): If num is nonzero, then
339 add OPERAND_ACC1, not OPERAND_ACC0.
341 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
343 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
346 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
348 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
352 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
354 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
357 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
359 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
361 start-sanitize-nortel-ppc750
362 1998-09-09 Michael Meissner <meissner@cygnus.com>
364 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
367 end-sanitize-nortel-ppc750
368 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
370 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
372 (print_insn_little_arm): Detect Thumb symbols in elf object
375 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
377 * alpha-dis.c (print_insn_alpha): Use the machine type to
378 decide which PALcode set to include.
380 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
382 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
384 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
386 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
387 MSUB and MSUBS instructions.
390 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
392 * mips-opc.c: Insert contents of vu0.h, rather than including it.
394 * Makefile.am: Rebuild dependencies.
398 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
400 * ppc-opc.c (powerpc_operands): Omit parens around additions in
403 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
405 start-sanitize-coldfire
406 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
407 ColdFire, as below for mulsl and mulul.
409 end-sanitize-coldfire
410 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
411 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
412 +, -, and d for ColdFire.
414 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
415 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
416 (extract_mbe): Likewise.
418 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
420 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
422 * m10300-opc.c: First cut at UDF instructions.
424 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
426 * m32r-opc.c: Regenerate (remove semantic descriptions).
428 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
430 * arm-dis.c (print_insn_big_arm): Fix indentation.
431 (print_insn_little_arm): Likewise.
433 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
435 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
437 (print_insn_little_arm): Likewise.
439 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
441 Move all global state data into opcode table struct, and treat
442 opcode table as something that is "opened/closed".
443 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
444 (cgen_asm_init): Delete.
445 (cgen_set_parse_operand_fn): New function.
446 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
447 (cgen_dis_init): Delete.
448 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
449 (cgen_current_{opcode_table_mach,endian}): Delete.
450 start-sanitize-cygnus
451 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
452 * cgen-dis.in (all fns): Ditto.
453 * cgen-opc.in (all fns): Ditto.
455 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
457 start-sanitize-cygnus
458 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
460 * cgen-dis.in (print_normal): Split into two.
461 (print_address): New function.
462 (extract_insn_normal): Clarify insn_value arg.
463 (print_int_insn): Renamed from print_insn.
464 (print_insn): New arg.
465 (print_insn_@arch@): Open opcode table if not already done so.
466 Move reading of insn into print_insn.
469 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
471 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
475 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
477 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
478 accept an accumulator choice.
479 * m32r-opc.c,m32r-opc.h: Regenerate.
482 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
484 * m10300-opc.c: Add entries for "no_match_operands" field in
488 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
490 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
494 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
496 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
499 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
501 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
503 * m10300-opc.c: Add autoincrement memory loads/stores.
507 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
509 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
510 phmsubh respectively.
513 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
515 start-sanitize-cygnus
516 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
518 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
519 @arch_cgen_get_int_operand.
520 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
521 Update call to @arch@_cgen_insert_operand.
522 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
523 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
524 (extract_insn_normal): New arg `pc', callers updated.
525 Update call to @arch@_cgen_extract_operand.
526 (print_insn): Update call to CGEN_EXTRACT_FN.
528 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
531 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
533 * m10300-opc.c: Fix load to sp and store from sp for the am33.
534 Add more multimedia instructions.
536 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
538 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
543 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
545 * mips-opc.c (pref): Enabled for the r5900.
548 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
550 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
552 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
554 (OP_J): Remove unnecessary subtraction when 16-bit displacement
555 will be masked later.
558 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
560 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
563 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
565 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
566 from raw register #s to symbolic names to make debugging easier.
569 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
571 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
573 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
575 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
576 start-sanitize-cygnus
577 * Makefile.am (CGENDIR): Set via configure.
578 (CGEN): New variable.
579 (CGENFILES): object.scm renamed to cos.scm.
580 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
581 (stamp-m32r): Pass prefix to run-cgen.
582 * Makefile.in: Regenerate.
583 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
584 * cgen-dis.in: Ditto.
585 * cgen-opc.in: Ditto.
586 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
587 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
588 * configure: Regenerate.
592 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
594 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
596 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
598 * m10300-opc.c: Reorder more instructions so that we do not
599 accidentally match a mn10300 instruction when we really
600 wanted an am33 instruction.
603 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
605 * m10300-dis.c: Only recognize instructions from the currently
607 * m10300-opc.c: Add field indicating the particular variant of
608 the mn10300 each instruction is available on.
610 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
612 * configure.in: For bfd_vax_arch, build vax-dis.lo.
613 * Makefile.am: Rebuild dependencies.
614 (CFILES): Add vax-dis.c.
615 (ALL_MACHINES): Add vax-dis.lo.
616 * aclocal.m4: Rebuild with current libtool.
617 * configure, Makefile.in: Rebuild.
619 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
621 * vax-dis.c: New file, from work by Pauline Middelink
622 <middelin@polyware.iaf.nl>.
623 * disassemble.c (ARCH_vax): Define if ARCH_all.
624 (disassembler): Add case for ARCH_vax.
625 * makefile.vms: Support compilation on vms/vax.
628 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
630 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
631 the DVP_OPERAND_RELOC_11_S4 relocation.
635 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
637 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
639 (disassemble): Correctly handle FMT_D10 instructions.
641 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
642 am33 shift instructions.
644 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
646 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
647 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
649 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
650 (mn10300_opcodes): Reorder so as to try and select opcodes from
651 the core chip when multiple alternatives exist. Change several
652 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
653 "macbu" instructions. Fix typos in a couple DSP instructions too.
656 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
658 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
659 related to sign extension and the size of ints.
661 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
663 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
664 instructions. Support (sp) addressing mode by expanding it into
668 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
670 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
671 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
672 be used as immediate values.
676 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
678 * m10300-opc.c: Support 4 byte DSP instructions.
681 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
683 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
686 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
688 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
691 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
693 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
696 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
698 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
699 found on the mn10300.
702 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
704 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
707 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
709 * mips-dis.c (print_insn_little_mips): Previously, instruction
710 printing references the symbol table to determine whether the
711 instruction resides in a block regular instructions or mips16
712 instructions. However, when the disassembler gets used in other
713 environments where the symbol table is not present, we no longer
714 rely in the symbol table, rather, use the low bit of the
715 instructions address to guess. There should be no change for usage
716 of the disassembler in host based programs, gdb, objdump.
717 (print_insn_big_mips): ditto.
718 (print_insn_mips): ditto
720 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
722 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
724 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
727 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
728 operands for the am33.
729 (mn10300_opcodes): Add new instructions from the am33.
731 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
733 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
735 * i386-dis.c (index16): Add '%' to register names. Use ','
738 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
740 * i386-dis.c: Don't print opcode suffix when we can figure out the
741 size (and gas can!) by register operands, or from the default
743 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
745 (dis386, dis386_twobyte, grps): Use new suffix macros.
746 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
747 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
748 order of cmps operands to agree with Intel docs. Correct operand
749 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
750 agree with Intel docs.
751 (print_insn_x86): Print orphan fwait before other prefixes.
752 Return correct byte count for orphan fwait with prefixes. Don't
753 print `bound' operands in reverse order.
754 (ckprefix): Stop accumulating prefixes if we get fwait.
755 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
757 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
759 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
760 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
762 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
764 Fix problems when bfd_vma is wider than long.
765 * i386-dis.c: Make op_address and start_pc unsigned.
766 (set_op): Make parameter unsigned.
767 (print_insn_x86): Cast to bfd_vma when passing a value to
769 * ns32k-dis.c (CORE_ADDR): Don't define.
770 (print_insn_ns32k): Change type of addr to bfd_vma. Use
771 bfd_scan_vma to read back address.
772 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
774 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
775 (NEXTULONG): New definition.
776 (print_insn_m68k): Avoid overflow when computing third argument of
778 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
779 Use disp instead of val to store offset values.
780 (print_indexed): Use base_disp instead of word to store base
781 displacement, to avoid overflow.
782 * m10300-dis.c (disassemble): Cast value to long when computing
783 pc-relative address, to get correct sign extension.
785 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
787 * m32r-opc.c: Regenerate.
789 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
791 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
792 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
794 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
796 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
798 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
800 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
802 (OP_DSreg): Rename from OP_DSSI.
803 (OP_ESreg): Rename from OP_ESDI.
804 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
806 (append_seg): Rename from append_prefix.
807 (ptr_reg): New function.
808 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
810 (PREFIX_ADDR): Rename from PREFIX_ADR.
811 (float_reg): Add non-broken opcodes for people who don't want
814 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
816 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
819 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
821 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
823 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
825 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
826 0; produce error message for shifts of size 32 (or 64 for 64-bit
827 shifts), because the hardware doesn't support them.
830 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
832 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
835 * vu0.h (sqc2): Fix opcode.
837 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
841 start-sanitize-cygnus
842 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
844 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
845 Change pinfo to use WR_HILO.
848 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
850 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
851 LONG_2, LONG_2b formats to use this new operand.
853 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
855 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
857 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
859 * sparc-dis.c (print_insn_sparc): big endian instruction / little
862 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
864 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
865 and SHORT_B3b formats to use Rb instead of Ra.
867 Add FLAG_MUL16 to MUL2XH opcode.
869 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
870 to existing 1.1.1 parallelisation prohibition procedure.
872 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
874 start-sanitize-cygnus
875 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
876 * cgen-dis.in (extract_normal): Likewise.
878 * m32r-asm.c,m32r-dis.c: Regenerate.
881 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
883 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
887 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
889 * mips-opc.c (multu1): Add two operand variant for the r5900.
892 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
894 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
895 with a shift count of 0.
898 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
900 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
902 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
904 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
905 (_print_insn_mips): Likewise.
906 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
910 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
912 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
913 (cgen_hw_lookup_by_num): New function.
916 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
919 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
921 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
923 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
925 * sparc-dis.c (print_insn_sparc): Always fetch instructions
926 as big-endian on SPARClite.
929 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
931 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
933 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
937 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
939 * d30v-opc.c (pre_defined_register): Remove alias for r0.
942 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
944 * mips-opc.c (break): Added 20-bit single-operand break
945 instruction for R5900 only.
948 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
950 * po/Make-in (install-info): New target.
952 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
954 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
955 * configure: Rebuild.
957 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
959 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
960 variety of ISA2 instructions to set bottom ten bits of trap code.
962 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
964 * Makefile.am (config.status): Add explicit target so that
965 config.status depends upon bfd/configure.in.
966 * Makefile.in: Rebuild.
968 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
970 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
971 instructions to set bottom ten bits of break code.
972 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
973 for above optional argument.
975 start-sanitize-cygnus
976 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
978 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
979 * m32r-opc.h: Regenerate.
982 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
984 * makefile.vms: Run dec c with /nodebug.
986 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
988 * Makefile.in: Rebuilt.
989 * Makefile.am: Regenerated dependencies with mkdep.
991 * opintl.h (_): Define as dgettext.
993 start-sanitize-cygnus
994 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
996 * configure.in: Add support for --enable-cgen-maint.
997 * Makefile.am (M32R_DEPS): New variable.
998 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
999 * aclocal.m4: Regenerate.
1000 * Makefile.in: Regenerate.
1001 * configure: Regenerate.
1003 * Makefile.am (CGENFILES): Add minsn.scm.
1006 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
1008 * cgen-asm.c: Internationalised.
1009 start-sanitize-cygnus
1010 * cgen-asm.in: Internationalised.
1011 * cgen-opc.in: Internationalised.
1013 * m32r-asm.c: Internationalised.
1014 * m32r-dis.c: Internationalised.
1015 * m32r-opc.c: Internationalised.
1017 * aclocal.m4: Regenerated.
1018 * configure: Regenerated.
1019 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
1020 * Makefile.in: Rebuild.
1021 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
1022 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
1024 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
1026 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
1028 * aclocal.m4, configure: Rebuild with current tools.
1030 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
1032 * opintl.h: New file - contains internationalisation macros used
1033 by source files in this directory.
1034 * po/: New subdirectory - contains internationalisation files.
1035 * po/Make-in: New file - Makefile constructor.
1036 * po/POTFILES.in: New file - list of files in opcodes directory
1037 that should be scan for internationalisation macros.
1038 * po/opcodes.pot: New file - list of internationisation strings
1039 found in files mentioned in po/POTFILES.in.
1040 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
1041 entry. Add intl directory to include paths.
1042 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
1043 HAVE_STRCPY, HAVE_LC_MESSAGES
1044 * configure.in: Add rule to build Makefile in po subdirectory.
1045 * Makefile.in: Rebuilt.
1046 * aclocal.m4: Rebuilt.
1047 * config.in: Rebuilt.
1048 * configure: Rebuilt.
1049 * alpha-opc.c: Internationalised.
1050 * arc-dis.c: Internationalised.
1051 * arc-opc.c: Internationalised.
1052 * arm-dis.c: Internationalised.
1053 * cgen-asm.c: Internationalised.
1054 * d30v-dis.c: Internationalised.
1055 * dis-buf.c: Internationalised.
1057 * dvp-dis.c: Internationalised.
1058 * dvp-opc.c: Internationalised.
1060 * h8300-dis.c: Internationalised.
1061 * h8500-dis.c: Internationalised.
1062 * i386-dis.c: Internationalised.
1063 * m10200-dis.c: Internationalised.
1064 * m10300-dis.c: Internationalised.
1065 * m68k-dis.c: Internationalised.
1066 * m88k-dis.c: Internationalised.
1067 * mips-dis.c: Internationalised.
1068 * ns32k-dis.c: Internationalised.
1069 * opintl.h: Internationalised.
1070 * ppc-opc.c: Internationalised.
1071 * sparc-dis.c: Internationalised.
1072 * v850-dis.c: Internationalised.
1073 * v850-opc.c: Internationalised.
1075 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
1077 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
1078 (asm_hash_table_entries): New variable.
1079 (cgen_asm_init): Free asm_hash_table_entries.
1080 (hash_insn_array,hash_insn_list): New functions.
1081 (build_asm_hash_table): Use them. Hash macro insns as well.
1082 (cgen_asm_lookup_insn): Update.
1083 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
1084 (dis_hash_table_entries): New variable.
1085 (cgen_dis_init): Free dis_hash_table_entries.
1086 (hash_insn_array,hash_insn_list): New functions.
1087 (build_dis_hash_table): Use them. Hash macro insns as well.
1088 (cgen_dis_lookup_insn): Update.
1089 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
1090 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
1091 (cgen_macro_insn_count): New function.
1092 start-sanitize-cygnus
1093 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
1094 All callers updated. Sanity check result of extract fn.
1095 (@arch@_cgen_get_insn_operands): Change result type to void.
1096 Delete args insn_value, length. New arg fields. All callers updated.
1097 (@arch@_cgen_lookup_get_insn_operands): New function.
1099 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1101 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
1103 * i386-dis.c (OP_DSSI): Print segment override.
1105 start-sanitize-r5900
1106 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1108 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
1111 start-sanitize-r5900
1112 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
1114 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
1117 start-sanitize-r5900
1118 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
1120 * vu0.h (vlqd, vlqi): Update per revised specs.
1124 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1126 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1127 (vif_operands): Update.
1128 (vif_get_unpackloc): Delete.
1129 (state_vif_unpackloc{,_star_p}): Delete.
1130 (dvp_opcode_init_parse): Update.
1131 (vif_unpack_len_value): Avoid divide by zero.
1134 start-sanitize-r5900
1135 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1137 * vu0.h: Specs changed for VCALLMSR bit pattern.
1138 * mips-dis.c: (print_insn_arg) Matching change.
1141 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1143 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1146 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1148 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1149 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1150 * configure.in: Define and substitute WIN32LDFLAGS and
1152 * aclocal.m4: Rebuild with new libtool.
1153 * configure, Makefile.in: Rebuild.
1155 start-sanitize-r5900
1156 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1158 * vu0.h: Corrected bit pattern for VMAXI opcode.
1161 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1163 * m32r-opc.c: Regenerate.
1166 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1168 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1169 (dvp_expand_macro): Implement.
1170 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1171 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1174 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1176 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1177 before trying to copy it.
1178 * Makefile.in: Rebuild.
1180 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1182 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1184 start-sanitize-m32rx
1185 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1187 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1190 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1192 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1193 from an arbitrary valid buffer instead of fetching them on demand
1195 (invalid_float): use bit_extract_simple() instead of bit_extract().
1197 start-sanitize-m32rx
1198 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1200 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1201 * m32r-opc.h: Add extra control registers.
1204 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1206 From H.J. Lu <hjl@gnu.org>:
1207 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1210 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1212 * Branched binutils 2.9.
1214 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1216 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1217 disassembling last 4 bytes of a section.
1219 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1221 Fix some gcc -Wall warnings:
1222 * arc-dis.c (print_insn): Add casts to avoid warnings.
1223 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1224 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1226 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1227 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1228 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1229 (parse_ffstreg, parse_vif_mode): Likewise.
1231 * m10200-dis.c (disassemble): Likewise.
1232 * m10300-dis.c (disassemble): Likewise.
1233 * ns32k-dis.c (print_insn_ns32k): Likewise.
1234 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1235 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1236 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1237 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1238 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1240 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1241 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1242 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1244 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1245 start-sanitize-tic80
1246 * tic80-dis.c (print_one_instruction): Likewise.
1248 * w65-dis.c (print_operand): Likewise.
1249 * z8k-dis.c (fetch_data): Likewise.
1250 * a29k-dis.c: Add return type for find_byte_func_type.
1251 * arc-opc.c: Include <stdio.h>. Remove declarations of
1252 insert_multshift and extract_multshift.
1253 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1255 (extract_value): Fully parenthesize expression.
1257 * dvp-opc.c: Include <ctype.h>.
1258 (print_sdest): Add default case to switch.
1260 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1261 * h8500-opc.h (h8500_table): Fully bracket initializer.
1262 * w65-opc.h (optable): Likewise.
1263 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1264 * i386-dis.c (OP_E): Initialize local variables.
1265 * m10200-dis.c (print_insn_mn10200): Likewise.
1266 * mips-dis.c (print_insn_mips16): Likewise.
1267 * sh-dis.c (print_insn_shx): Likewise.
1268 * v850-dis.c (print_insn_v850): Likewise.
1269 * ns32k-dis.c (print_insn_arg): Declare.
1270 (get_displacement, invalid_float): Declare.
1271 (list_search, sign_extend, flip_bytes): Declare return type.
1272 (get_displacement): Likewise.
1273 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1275 (print_insn_ns32k): Make i unsigned.
1276 (invalid_float): Make static. Declare type of val.
1277 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1278 on each for iteration.
1279 * tic30-dis.c (get_indirect_operand): Likewise.
1280 * z8k-dis.c (print_insn_z8001): Declare return type.
1281 (print_insn_z8002): Likewise.
1282 (unparse_instr): Fix sprintf format strings.
1284 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1286 * mips-opc.c: Add "sync.l" and "sync.p".
1289 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1291 * dvp-opc.c (extract_vif_datalen): Rewrite.
1292 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1294 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1296 * dvp-dis.c (print_insn): Print unpack address in hex.
1297 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1298 Don't skip over '*', just record it.
1299 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1300 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1301 Don't skip over '*', just record it.
1302 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1303 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1304 (vif_opcodes): Likewise.
1305 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1306 (vif_macros,vif_macro_count): New globals.
1307 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1308 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1309 (vif_get_wl_cl): New function.
1310 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1313 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1315 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1316 default m68k variant to recognize.
1318 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1319 (ctrl, cobr, mem, ea): Likewise.
1320 (print_addr): Likewise. Remove cast.
1321 (ea): Cast argument of print_addr to bfd_vma.
1323 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1325 (cgen_parse_unsigned_integer): Likewise.
1326 (cgen_parse_address): Likewise.
1328 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1330 * i960-dis.c (ctrl): Add full braces to structure initialization.
1331 (cobr, mem, reg): Likewise.
1332 (ea): Correct parenthesization in expression.
1334 * cgen-asm.c: Include <ctype.h>.
1335 (build_asm_hash_table): Remove unused local variable i.
1336 (cgen_parse_keyword): Add casts to avoid warnings.
1338 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1339 symbol. Fix indentation.
1340 (print_insn_little_arm): Likewise.
1342 start-sanitize-r5900
1343 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1345 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1349 start-sanitize-m32rx
1350 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1352 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1357 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1359 * dvp-opc.c (vif_operand_datalen_special): New global.
1362 start-sanitize-r5900
1363 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1365 * vu0.h (vcallms): Use 'O' for call target operand.
1366 * mips-dis.c (print_insn_arg): Handle 'O'.
1369 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1371 * configure.in: Use AM_DISABLE_SHARED.
1372 * aclocal.m4, configure: Rebuild with libtool 1.2.
1374 start-sanitize-r5900
1375 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1377 * mips-dis.c: Change '%' to '#' in r5900 support.
1381 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1383 These patches are courtesy of Jonathan Walton and Tony Thompson
1384 (athompso@cambridge.arm.com).
1386 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1389 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1390 both the offset and the label closest to the destination.
1392 start-sanitize-r5900
1393 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1395 * vu0.h: New file with cop2/vu0 instructions.
1396 * mips-opc.c: Include vu0.h.
1397 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1399 (print_insn_mips): Do not emit a tab after an instruction if the
1400 first arg is an instruction completer (&). If the next arg is an
1401 escape character (%), then print the next arg verbatim.
1402 * Makefile.am (mips-opc.lo): Depend on vu0.h
1406 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1408 * dvp-opc.c (vif_opcodes): Add stcycl.
1410 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1412 * dvp-dis.c (print_dma): Change length from 16 to 8.
1415 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1417 * m32r-opc.h: Regenerate.
1420 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1422 * dvp-opc.c (print_dest1): Print dest spec again.
1423 (print_vfreg,print_accdest): Likewise.
1424 (vif_unpack_len): Round result up to word boundary.
1427 start-sanitize-vr4320
1428 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1430 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1432 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1434 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1439 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1441 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1442 (print_insn): Do mask comparison on proper opcode word.
1443 Print unsigned values in hex.
1444 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1445 (parse_bc): Catch missing dest.
1446 (parse_vfreg): Replace atoi call with strtol.
1447 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1448 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1449 (extract_gif_eop): New function.
1450 (gif_operands): Update eop entry.
1451 (VGIFOP,VGIFNREGS): Fix calcs.
1452 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1453 (gif_regs): Add entry for unused 11 case.
1454 (print_gif_regs): Print empty list instead of nothing.
1455 (extract_gif_nloop): Fix value calc.
1456 (print_gif_nloop): Always print value, even if 0.
1457 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1458 (vif_operands): Use them for wl,cl fields.
1459 (state_vif_wl,state_vif_cl): New static locals.
1460 (parse_vif_mode): Handle numeric args.
1461 (vif_unpack_len_value,vif_unpack_len): New functions.
1462 (vif_insn_len): Call vif_unpack_len.
1465 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1467 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1469 start-sanitize-cygnus
1470 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1472 * cgen-asm.in: Move insertion of generated routines to top of file.
1473 (insert_normal): Add prototype. Delete `shift' arg.
1474 * cgen-dis.in: Move insertion of generated routines to top of file.
1475 (extract_normal): Add prototype. Delete `shift' arg.
1476 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1477 (print_keyword): Add prototype. Fix type of `attrs' arg.
1480 start-sanitize-vr4320
1481 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1483 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1484 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1487 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1489 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1490 assume that info->symbols is non-empty.
1492 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1494 * alpha-opc.c (cvtqs) There is no such thing.
1495 (cvttq): Missing most of the /*d variants.
1497 start-sanitize-r5900
1498 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1500 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1502 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1503 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1506 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1508 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1509 delayed branches or jumps.
1512 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1514 * dvp-opc.c (vif_operands): Add unpack[u] support.
1515 (vif_opcodes): Ditto.
1516 (*_vif_imrubits): Renamed from *_vif_imrbits.
1518 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1520 * dvp-dis.c (print_insn): Handle word number.
1521 Handle mips address vs vu address.
1522 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1523 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1524 ({insert,extract}_dma_addr): Fix word ofset.
1525 ({insert,print}_gif_regs): Fix encode/decode.
1528 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1530 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1532 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1533 * tic30-dis.c (print_branch): Likewise.
1535 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1536 * dvp-dis.c (dvp_info_mach_type): New function.
1537 (print_insn_dvp): Call it.
1538 (print_vif): Return length of 4 if mpg or direct insn so following
1539 insns get properly disabled.
1540 (print_gif): Fix word order.
1541 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1542 (gif_operands): Fix word order.
1543 (gif_opcodes): Likewise.
1544 ({insert,extract,print}_gif_regs): Likewise.
1545 (gif_regs): Add new register number/name changes.
1546 (dma_opcodes): Add dmarefe insn.
1549 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1551 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1552 saved_symbol code as it is no longer needed.
1554 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1556 * cgen-asm.c: Include symcat.h.
1557 * cgen-dis.c,cgen-opc.c: Ditto.
1558 start-sanitize-cygnus
1559 * cgen-asm.in,cgen-dis.in: Ditto.
1561 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1564 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1566 * dvp-opc.c (extra_dma_flags): Fix typos.
1567 (dma_operands): Fix word numbers.
1568 (dma_opcodes): Likewise.
1569 ({insert,extract}_dma_flags): Likewise.
1572 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1574 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1577 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1579 * dvp-dis.c (print_gif): Complete.
1580 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1581 (state_gif_{nregs,regs,nloop}): New static locals.
1582 (*_gif_*): Complete.
1583 (dvp_opcode_init_{parse,print}): Init gif state locals.
1584 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1585 (vif_insn_len): Handle `unpack'.
1586 ({insert,extract}_dma_flags): Complete.
1589 start-sanitize-r5900
1590 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1592 * mips-opc.c (mula.s): Renamed from multa.s.
1595 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1597 * m32r-opc.[ch]: Regenerate.
1600 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1602 * dvp-opc.c (dma_operands): Rewrite.
1603 (dma_operand_{count,addr}): New globals.
1604 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1605 (insert_dma_addr): Insert value into insn.
1606 (extract_dma_addr): Extract value from insn.
1608 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1610 * dvp-dis.c (print_vu): Handle loi insns.
1611 (print_insn): Likewise.
1612 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1613 (vu_operands): Make LDEST1 a FAKE operand.
1614 (parse_dest1): Allow elided argument.
1615 (print_dest1): Don't print the argument.
1617 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1619 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1620 (print_vfreg): Don't print dest spec.
1621 (parse_accdest): Dest spec is optional.
1622 (print_accdest): Don't print dest spec.
1625 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1627 start-sanitize-cygnus
1628 * Makefile.am (CGENFILES): Update.
1629 * Makefile.in: Regenerate.
1630 * cgen-asm.in (insert_normal): Result is error message now.
1631 Validate value to be inserted.
1632 (insert_insn_normal): Result is error message now.
1633 (@arch@_cgen_assemble_insn): Update.
1635 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1636 arguments. Don't perform validation here.
1637 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1639 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1641 start-sanitize-cygnus
1642 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1643 operand instance list.
1645 * m32r-opc.c: Regenerate.
1647 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1649 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1650 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1652 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1654 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1656 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1658 * configure.in: Get the version number from BFD.
1659 * configure: Rebuild.
1661 From H.J. Lu <hjl@gnu.org>:
1662 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1663 * Makefile.in: Rebuild.
1665 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1667 * m32r-opc.c: Regenerate.
1668 * m32r-opc.h: Regenerate.
1670 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1672 start-sanitize-cygnus
1673 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1674 Ignore ALIAS insns if asked to.
1675 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1677 * m32r-opc.c: Regenerate.
1680 * dvp.opc.c: Nicely format opcode tables.
1681 (vu_operands): New element UFLAGS.
1682 (parse_uflags,print_uflags): New functions.
1683 (vu_upper_opcodes): Add UFLAGS to all insns.
1686 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1688 Fix rac to accept only a0:
1689 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1690 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1691 Introduce OPERAND_GPR.
1692 * d10v-dis.c (print_operand): Likewise.
1694 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1696 start-sanitize-cygnus
1697 * cgen-opc.in: New file.
1698 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1699 * Makefile.am (CGENFILES): Add cgen-opc.in.
1700 * Makefile.in: Regenerate.
1701 * cgen-dis.in (*): Use PTR instead of void *.
1702 (print_insn): Delete unused vars `i', `syntax'.
1704 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1705 (cgen_hw_lookup): Make result const.
1706 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1709 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1711 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1712 (vif_opcodes): Update renamed insns.
1713 * dvp-dis.c (*): Likewise.
1716 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1718 * configure, aclocal.m4: Rebuild with new libtool.
1720 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1722 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1723 instructions use a PC relative branch, not absolute.
1725 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1727 * configure.in: Set libtool_enable_shared rather than
1728 libtool_shared. Remove diversion hack.
1729 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1731 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1733 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1734 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1736 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1738 * tic30-dis.c: New file.
1739 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1740 * configure.in: Handle bfd_tic30_arch.
1741 * Makefile.am: Rebuild dependencies.
1742 (CFILES): Add tic30-dis.c
1743 (ALL_MACHINES): Add tic30-dis.lo.
1744 * configure, Makefile.in: Rebuild.
1746 start-sanitize-m32rx
1747 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1749 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1750 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1751 macwhi-a and macwlo-a instructions.
1755 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1757 * dvp-opc.c, fixed encoding of a bunch of instructions to
1758 be consistent with the asmvu assembler (and inconsistent
1759 with the specification).
1761 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1763 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1764 in the opcode table. The pkemscalf instruction must come first.
1766 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1768 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1771 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1773 * m32r-opc.h (HAVE_CPU_M32R): Define.
1776 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1778 * dvp-dis.c, dvp-opc.c: New files.
1779 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1780 * configure: Regenerate.
1781 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1782 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1783 (mips-dis.lo): Compile with @archdefs@.
1784 * Makefile.in: Regenerate.
1785 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1786 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1789 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1791 * v850-opc.c (insertion routines): If both alignment and size is
1792 wrong then report this.
1794 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1796 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1797 Only recognize instructions for the current target_processor.
1799 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1801 * d10v-dis.c (PC_MASK): Correct value.
1802 (print_operand): If there's a reloc, don't calculate the
1803 address because they could be in different sections.
1805 start-sanitize-cygnus
1806 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1808 * cgen.sh: Rewrite to be like simulator's version.
1809 * Makefile.am (cgen): Update call to cgen.sh.
1810 * Makefile.in: Regenerate
1813 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1815 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1816 instruction after the 4650's "mul" instruction; nobody's using the
1817 4010 these days. If object files someday indicate which processor
1818 variant they're intended for, we can do a better job at this.
1820 start-sanitize-r5900
1821 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1823 * mips-opc.c (c.lt.s): Add r5900 variant.
1827 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1829 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1830 table provided entry size. Use CGEN_INSN_MNEMONIC.
1831 (cgen_parse_keyword): Rewrite.
1832 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1833 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1834 * cgen-opc.c: Clean up pass over `struct foo' usage.
1835 (cgen_keyword_lookup_value): Handle "" entry.
1836 (cgen_keyword_add): Likewise.
1837 start-sanitize-cygnus
1838 * Makefile.am: Add cgen support.
1839 * Makefile.in: Regenerate.
1840 * configure.in: Add cgen support.
1841 * configure: Regenerate.
1842 * aclocal.m4: Regenerate.
1843 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1846 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1848 * mips-opc.c: Add FP_D to s.d instruction flags.
1850 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1852 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1854 start-sanitize-tic80
1855 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1857 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1858 PC relative offset forms before the 15 bit forms. An assembler command
1859 line option now chooses the default.
1862 start-sanitize-r5900
1863 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1865 * mips-opc.c: Add many missing r5900 instructions.
1868 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1870 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1871 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1873 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1875 * configure: Only build libopcodes shared if --enable-shared's value
1876 was `yes', or was set to `*opcodes*'.
1877 * aclocal.m4: Likewise.
1878 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1879 original source of this bit of code. It's not clear what the best fix
1882 start-sanitize-r5900
1883 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1885 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1887 start-sanitize-tic80
1888 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1890 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1891 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1892 offset forms before the 15 bit forms, to default to the long forms.
1895 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1897 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1899 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1901 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1902 symbol if none is present.
1903 (print_insn_big_arm): Prevent examination of stored symbol if
1906 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1908 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1910 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1912 * disassemble.c: Remove disasm_symaddr() function.
1914 * arm-dis.c: Use info->symbol instead of info->flags to determine
1915 if disassmbly should be in Thumb or Arm mode.
1917 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1919 * arm-dis.c: Add support for disassembling Thumb opcodes.
1920 (print_insn_thumb): New function.
1922 * disassemble.c (disasm_symaddr): New function.
1924 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1925 (thumb_opcodes): Table of Thumb opcodes.
1927 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1929 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1931 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1932 and 'v' as operand types.
1934 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1936 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1937 <olivier.carmona@di.epfl.ch>.
1938 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1939 which has a two word opcode with a one word argument.
1941 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1943 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1944 unsigned, not signed.
1945 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1947 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1949 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1950 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1951 (ftrv): Slay the cut-and-paste monster.
1953 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1955 * d10v-dis.c (print_operand):
1956 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1958 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1960 * d10v-opc.c (OPERAND_FLAG): Split into:
1961 (OPERAND_FFLAG, OPERAND_CFLAG) .
1965 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1967 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1968 field for all INSN_MACRO's.
1969 * mips16-opc.c: same
1971 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1973 * mips-opc.c (sync,cache): These are 3900 insns.
1975 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1977 sh-opc.h (sh_table): Remove ftst/nan.
1979 start-sanitize-cygnus
1980 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1982 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1983 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1985 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1989 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1991 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1992 Add tx49 insns and configury.
1995 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1997 * mips-opc.c (ffc, ffs): Fix mask.
1999 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
2001 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
2004 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2006 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2007 start-sanitize-cygnus
2008 Added VR5400 instructions.
2009 (N5): New cpu-id macro.
2011 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2013 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
2015 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
2016 (WR_HILO, RD_HILO, MOD_HILO): New macros.
2018 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
2020 * v850-dis.c (disassemble): Replace // with /* ... */
2022 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
2024 * sparc-opc.c: Add wr & rd for v9a asr's.
2025 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
2026 (v9a_asr_reg_names): New variable.
2027 Patch from David Miller <davem@vger.rutgers.edu>.
2029 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
2031 * sparc-opc.c (v9notv9a): New insn type.
2032 (IMPDEP): Move to the end to not conflict with edge8 et al.
2033 Patch from David Miller <davem@vger.rutgers.edu>.
2035 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
2037 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
2039 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
2041 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
2043 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
2045 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
2046 of disassemble_info structure to determine if an overlay address
2047 has a matching symbol in low memory.
2049 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
2050 new symbol_at_address_func field in disassemble_info structure.
2052 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
2054 * v850-opc.c (extract_d22): Use signed arithmatic.
2056 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
2058 * mips-opc.c: Three op mult is not an ISA insn.
2060 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
2062 * mips-opc.c: Fix formatting.
2064 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
2066 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
2067 than assuming that char is signed. Explicitly sign extend 16 bit
2068 values, rather than assuming that short is 16 bits.
2069 (OP_sI, OP_J, OP_DIR): Likewise.
2071 start-sanitize-v850e
2072 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
2074 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
2078 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
2080 * v850-opc.c: Fix typo in comment.
2082 * v850-dis.c (disassemble): Add test of processor type when
2083 determining opcodes.
2085 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
2087 * configure.in: Use a diversion to set enable_shared before the
2088 arguments are parsed.
2089 * configure: Rebuild.
2091 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
2093 * m68k-opc.c (TBL1): Use ! rather than `.
2094 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
2096 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
2098 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
2100 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
2102 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
2105 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
2106 * aclocal.m4: Rebuild with new libtool.
2107 * configure: Rebuild.
2109 start-sanitize-v850e
2110 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
2112 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
2115 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
2117 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
2119 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
2121 * v850-opc.c (v850_opcodes): Further rearrangements.
2123 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
2125 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
2127 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
2129 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
2132 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2134 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2136 * mips16-opc.c: Added mips16 sdbbp.
2139 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2141 * v850-opc.c: Initialise processors field of v850_opcode structure.
2143 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2145 Merge changes from Martin Hunt:
2147 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2149 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2150 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2151 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2153 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2155 * d30v-dis.c (print_insn): First operand of d*i (delayed
2156 branch) instructions is relative.
2158 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2159 (d30v_operand_table): Add IMM6S3 type.
2160 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2162 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2163 and cmp instructions.
2165 * d30v-opc.c: Correct entries for repeat*, and sat*.
2166 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2167 types. Correct several formats.
2169 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2171 * d30v-opc.c (pre_defined_registers): Change control registers.
2173 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2174 SHORT_C2. Manual was incorrect.
2176 * d30v-dis.c (lookup_opcode): Return value now indicates
2177 if an opcode has a short and a long form. Used for deciding
2178 to append a ".s" or ".l".
2179 (print_insn): Append a ".s" to an instruction if it is
2180 the short form and ".l" if it is a long form. Do not append
2181 anything if the instruction has only one possible size.
2183 * d30v-opc.c: Change mulx2h to require an even register.
2184 New form: SHORT_A2; a SHORT_A form that needs an even
2185 register as the first operand.
2187 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2188 instruction was not being disassembled if there were an odd
2189 number of instructions.
2191 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2193 start-sanitize-v850e
2194 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2196 * v850-dis.c (disassemble): Improved display of register lists.
2199 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2201 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2202 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2203 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2204 fandnot1s, fandnot2s.
2206 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2208 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2210 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2212 * cgen-asm.c (cgen_parse_address): New argument resultp.
2213 All callers updated.
2214 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2216 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2218 * mn10200-dis.c (disassemble): PC relative instructions are
2219 relative to the next instruction, not the current instruction.
2221 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2223 * v850-dis.c (disassemble): Only signed extend values that are not
2224 returned by extract functions.
2225 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2227 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2229 * v850-opc.c: Update comments. Remove use of
2230 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2232 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2234 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2236 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2238 * configure: Rebuilt with latest devo autoconf for NT support.
2240 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2242 * v850-dis.c (disassemble): Use curly brace syntax for register
2245 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2246 where r0 is being used as a destination register.
2248 start-sanitize-v850e
2249 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2251 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2254 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2256 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2257 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2258 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2259 Add insns to access SGR and DBR.
2260 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2262 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2264 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2266 start-sanitize-v850e
2267 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2269 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2270 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2273 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2275 * configure (cgen_files): Add support for v850e target.
2276 * configure.in (cgen_files): Add support for v850e target.
2278 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2280 * configure (cgen_files): Add support for v850ea target.
2281 * configure.in (cgen_files): Add support for v850ea target.
2284 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2286 * configure.in (bfd_arc_arch): Add.
2287 * configure: Rebuild.
2288 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2289 * Makefile.in: Rebuild.
2290 * arc-dis.c, arc-opc.c: New files.
2291 * disassemble.c (ARCH_all): Define ARCH_arc.
2292 (disassembler): Add ARC support.
2294 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2296 start-sanitize-v850e
2297 * v850-dis.c (disassemble): Add support for v850EA instructions.
2299 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2300 (v850_opcodes): Add v850EA instructions.
2302 * v850-dis.c (disassemble): Add support for v850E instructions.
2304 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2305 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2306 insert_spe, extract_spe): New Functions.
2307 (v850_opcodes): Add v850E instructions.
2310 * v850-opc.c: Reorganised and re-layed out to improve readability
2313 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2315 * configure: Rebuild with autoconf 2.12.1.
2317 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2319 * aclocal.m4, configure: Rebuild with new automake patches.
2321 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2323 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2324 * acinclude.m4: Just include acinclude.m4 from BFD.
2325 * aclocal.m4, configure: Rebuild.
2327 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2329 * Makefile.am: New file, based on old Makefile.in.
2330 * acconfig.h: New file.
2331 * acinclude.m4: New file.
2332 * stamp-h.in: New file.
2333 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2334 Removed shared library handling; now handled by libtool. Replace
2335 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2336 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2337 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2338 handling in AC_OUTPUT.
2339 * dep-in.sed: Change .o to .lo.
2340 * Makefile.in: Now built with automake.
2341 * aclocal.m4: Now built with aclocal.
2342 * config.in, configure: Rebuild.
2344 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2346 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2348 start-sanitize-r5900
2349 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2351 * mips-opc.c: Fix coding of mtsa.
2354 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2356 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2358 * sparc-dis.c (sorted_opcodes): New static local.
2359 (struct opcode_hash): `opcode' is pointer to const element.
2360 (build_hash): First arg is now table of sorted pointers.
2361 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2362 (compare_opcodes): Update.
2364 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2366 * cgen-opc.c: #include <ctype.h>.
2367 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2368 Handle case insensitive hashing.
2369 (hash_keyword_value): Change type of `value' to unsigned int.
2371 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2373 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2374 precision FP, mark it as such. Likewise for double precision
2375 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2377 start-sanitize-r5900
2378 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2381 start-sanitize-r5900
2382 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2384 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2385 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2388 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2390 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2392 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2393 nesting depth when all the macros are expanded.
2395 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2397 * sparc-opc.c: The fcmp v9a instructions take an integer register
2398 as a destination, not a floating point register. From Christian
2399 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2401 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2403 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2404 syntax. From Roman Hodek
2405 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2407 * i386-dis.c (twobyte_has_modrm): Fix pand.
2409 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2411 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2413 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2415 * arm-dis.c: Add prototypes for arm_decode_shift and
2418 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2420 * mips-opc.c: Add r3900 insns.
2422 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2424 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2425 print delay slot instructions on the same line. When using a PC
2426 relative load, add a comment with the value being loaded if it can
2429 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2431 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2432 to pushS/popS for segment regs and byte constant so that
2433 pushw/popw printed when in 16 bit data mode.
2435 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2436 print cbtw, cwtd in 16 bit data mode.
2437 * i386-dis.c (putop): extra case W to support above.
2439 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2440 address size prefix in 16 bit address mode.
2442 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2444 * sh-dis.c: Reindent. Rename local variable fprintf to
2447 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2449 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2451 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2453 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2455 * mips16-opc.c (mip16_opcodes): same.
2457 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2459 * m68k-opc.c (moveb): Change $d to %d.
2461 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2463 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2464 (twobyte_has_modrm): Likewise.
2466 (OP_MMX, OP_EM, OP_MS): New static functions.
2468 * i386-dis.c: Revert patch of April 4. The output now matches
2471 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2473 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2476 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2478 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2480 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2482 * Makefile.in (install): Depend upon installdirs.
2483 (installdirs): New target.
2485 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2487 From Thomas Graichen <graichen@rzpd.de>:
2488 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2489 * configure: Rebuild.
2491 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2493 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2494 Delete string{,s}.h support.
2496 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2498 * cgen-asm.c (cgen_parse_operand_fn): New global.
2499 (cgen_parse_{{,un}signed_integer,address}): Update call to
2500 cgen_parse_operand_fn.
2501 (cgen_init_parse_operand): New function.
2502 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2503 from cgen_asm_init_parse.
2504 (m32r_cgen_assemble_insn): New operand `errmsg'.
2505 Delete call to as_bad, return error message to caller.
2506 (m32r_cgen_asm_hash_keywords): #if 0 out.
2508 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2510 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2512 [case 'J']: Fix typo in register name.
2514 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2516 * configure.in: Substitute SHLIB_LIBS.
2517 * configure: Rebuild.
2518 * Makefile.in (SHLIB_LIBS): New variable.
2519 ($(SHLIB)): Use $(SHLIB_LIBS).
2521 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2523 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2525 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2527 * disassemble.c (disassembler): Handle m32r.
2529 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2531 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2532 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2533 * Makefile.in (CFILES): Add them.
2534 (ALL_MACHINES): Add them.
2535 (dependencies): Regenerate.
2536 * configure.in (cgen_files): New variable.
2537 (bfd_m32r_arch): Add entry.
2538 * configure: Regenerate.
2540 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2542 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2543 * configure: Rebuild.
2545 * Makefile.in: Rebuild dependencies.
2547 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2549 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2552 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2554 * Branched binutils 2.8.
2556 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2558 * m10200-dis.c: Rename from mn10200-dis.c.
2559 * m10200-opc.c: Rename from mn10200-opc.c.
2560 * m10300-dis.c: Rename from mn10300-dis.c
2561 * m10300-opc.c: Rename from mn10300-opc.c.
2562 * Makefile.in: Update accordingly.
2564 * mips16-opc.c: Add mul and dmul macros.
2566 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2568 * makefile.vms: Update CFLAGS, add clean target.
2570 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2572 * mips-opc.c: Add "wait". From Ralf Baechle
2573 <ralf@gnu.ai.mit.edu>.
2575 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2576 * configure, config.in: Rebuild.
2577 * sysdep.h: Include <stdlib.h> if it exists.
2578 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2580 * Makefile.in: Rebuild dependencies.
2582 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2584 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2585 Andrew Bray <andy@madhouse.demon.co.uk>.
2587 * mips-opc.c: Add cast when setting mips_opcodes.
2589 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2591 * v850-dis.c (disassemble): Fix sign extension problem.
2592 * v850-opc.c (extract_d*): Fix sign extension problems to make
2593 disassembly calculate branch offsets correctly.
2595 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2597 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2599 * mips-opc.c: Add dctr and dctw.
2601 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2603 * d30v-dis.c (print_insn): Change the way signed constants
2606 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2608 * Makefile.in (BFD_H): New variable.
2609 (HFILES): New variable.
2610 (CFILES): Add all C files.
2611 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2612 Delete old dependencies, and build new ones.
2613 * dep-in.sed: New file.
2615 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2617 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2619 start-sanitize-coldfire
2620 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2622 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2625 end-sanitize-coldfire
2626 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2628 * mn10200-opc.c: Change "trap" to "syscall".
2629 * mn10300-opc.c: Add new "syscall" instruction.
2631 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2633 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2634 mulul insns on the coldfire.
2636 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2638 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2639 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2640 (print_insn_little_arm): Likewise.
2642 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2644 Based on patches from H.J. Lu <hjl@lucon.org>:
2645 * i386-dis.c (fetch_data): Add prototype.
2646 * m68k-dis.c (fetch_data): Add prototype.
2647 (dummy_print_address): Add prototype. Make static.
2648 * ppc-opc.c (valid_bo): Add prototype.
2649 * sparc-dis.c (build_hash_table): Add prototype.
2650 (is_delayed_branch, compute_arch_mask): Add prototypes.
2651 (print_insn_sparc): Make several local variables const.
2652 (compare_opcodes): Change arguments to const PTR. Add prototype.
2653 * sparc-opc.c (arg): Change name field to be const.
2654 (lookup_name, lookup_value): Add prototypes. Change table and
2655 name parameters to be const.
2656 (sparc_encode_asi): Change name parameter to be const.
2657 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2658 (sparc_encode_sparclet_cpreg): Likewise.
2659 (sparc_decode_asi): Change return type to be const.
2660 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2661 (sparc_decode_sparclet_cpreg): Likewise.
2663 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2665 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2666 Solaris doesn't like the combined options, and the -f is
2668 (stamp-tshlink, install): Likewise.
2670 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2672 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2675 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2677 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2679 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2681 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2684 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2686 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2688 start-sanitize-tic80
2689 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2691 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2693 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2695 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2698 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2700 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2701 floatformat_to_double to make portable.
2702 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2705 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2707 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2708 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2710 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2712 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2713 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2715 start-sanitize-tic80
2716 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2718 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2719 (OFF_SL_BR_SCALED): ... to this, and added the flag
2720 TIC80_OPERAND_BASEREL to the flags word.
2721 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2725 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2727 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2728 Change mips_opcodes from const array to a pointer,
2729 and change bfd_mips_num_opcodes from const int to int,
2730 so that we can increase the size of the mips opcodes table
2733 start-sanitize-tic80
2734 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2736 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2737 store BITNUM values in the table in one's complement form
2738 to match behavior when assembler is given a raw numeric
2739 value for a BITNUM operand.
2740 * tic80-dis.c (print_operand_bitnum): Ditto.
2743 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2745 * d30v-opc.c: Removed references to FLAG_X.
2747 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2749 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2751 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2753 * Makefile.in: Added d30v object files.
2754 * configure: (bfd_d30v_arch) Rebuilt.
2755 * configure.in: (bfd_d30v_arch) Added new case.
2756 * d30v-dis.c: New file.
2757 * d30v-opc.c: New file.
2758 * disassemble.c (disassembler) Add entry for d30v.
2760 start-sanitize-tic80
2761 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2763 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2764 representations for the floating point BITNUM values.
2766 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2768 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2769 in the table in one's complement form, as they appear in the
2771 (tic80_symbol_to_value): Use macros to access predefined
2773 (tic80_value_to_symbol): Ditto.
2774 (tic80_next_predefined_symbol): New function.
2775 * tic80-dis.c (print_operand_bitnum): Remove code that did
2776 one's complement for BITNUM values.
2779 start-sanitize-r5900
2780 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2782 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2785 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2787 * makefile.vms: Remove 8 bit characters. Update to latest
2790 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2792 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2794 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2796 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2797 (IMM24_PCREL): Likewise.
2799 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2801 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2802 address for an extended PC relative instruction that is not a
2805 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2807 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2810 start-sanitize-tic80
2811 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2813 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2814 (tic80_opcodes): Sort entries so that long immediate forms
2815 come after short immediate forms, making it easier for
2816 assembler to select the right one for a given operand.
2819 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2821 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2823 (print_insn_mips16): Likewise.
2825 start-sanitize-r5900
2826 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2828 * mips-opc.c: add r5900.
2831 start-sanitize-tic80
2832 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2834 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2835 a symbol class that restricts translation to just that
2836 class (general register, condition code, etc).
2838 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2840 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2841 and REG_DEST_E for register operands that have to be
2842 an even numbered register. Add REG_FPA for operands that
2843 are one of the floating point accumulator registers.
2844 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2845 (tic80_opcodes): Change entries that need even numbered
2846 register operands to use the new operand table entries.
2847 Add "or" entries that are identical to "or.tt" entries.
2850 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2852 * mips16-opc.c: Add new cases of exit instruction for
2854 * mips-dis.c (print_mips16_insn_arg): Display floating point
2855 registers in operands of exit instruction. Print `$' before
2856 register names in operands of entry and exit instructions.
2858 start-sanitize-tic80
2859 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2861 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2862 pairs for all predefined symbols recognized by the assembler.
2863 Also used by the disassembling routines.
2864 (tic80_symbol_to_value): New function.
2865 (tic80_value_to_symbol): New function.
2866 * tic80-dis.c (print_operand_control_register,
2867 print_operand_condition_code, print_operand_bitnum):
2868 Remove private tables and use tic80_value_to_symbol function.
2871 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2873 * d10v-dis.c (print_operand): Change address printing
2874 to correctly handle PC wrapping. Fixes PR11490.
2876 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2878 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2881 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2883 * mips-dis.c (print_insn_mips16): Set insn_info information.
2884 (print_mips16_insn_arg): Likewise.
2886 * mips-dis.c (print_insn_mips16): Better handling of an extend
2887 opcode followed by an instruction which can not be extended.
2889 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2891 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2892 coldfire moveb instruction to not allow an address register as
2893 destination. Although the documentation does not indicate that
2894 this is invalid, experiments uncovered unexpected behavior.
2895 Added a comment explaining the situation. Thanks to Andreas
2896 Schwab for pointing this out to me.
2898 start-sanitize-tic80
2899 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2901 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2902 entries are presorted so that entries with the same mnemonic are
2903 adjacent to each other in the table. Sort the entries for each
2904 instruction so that this is true.
2907 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2909 * m68k-dis.c: Include <libiberty.h>.
2910 (print_insn_m68k): Sort the opcode table on the most significant
2911 nibble of the opcode.
2913 start-sanitize-tic80
2914 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2916 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2917 "vsub", "vst", "xnor", and "xor" instructions.
2918 (V_a1): Renamed from V_a, msb of accumulator reg number.
2919 (V_a0): Add macro, lsb of accumulator reg number.
2921 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2923 * tic80-dis.c (print_insn_tic80): Broke excessively long
2924 function up into several smaller ones and arranged for
2925 the instruction printing function to be callable recursively
2926 to print vector instructions that have both a load and a
2927 math instruction packed into a single opcode.
2928 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2929 to explain why it comes after the other vector opcodes.
2932 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2934 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2935 move insns to handle immediate operands.
2937 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2939 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2940 fix operand mask in the "moveml" entries for the coldfire.
2942 start-sanitize-tic80
2943 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2945 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2946 New macros for building vector instruction opcodes.
2947 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2948 FMT_LI, which were unused. The field is now a flags field.
2949 Remove some opcodes that are possible, but illegal, such
2950 as long immediate instructions with doubles for immediate
2951 values. Add "vadd" and "vld" instructions.
2953 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2955 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2956 the order more logical. Move the shift alias instructions ("rotl",
2957 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2958 interspersed with the regular sr.x and sl.x instructions. Add
2959 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2960 "sub", "subu", "swcr", and "trap".
2962 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2964 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2965 (OFF_SL_PC): Renamed from OFF_SL.
2966 (OFF_SS_BR): New operand type for base relative operand.
2967 (OFF_SL_BR): New operand type for base relative operand.
2968 (REG_BASE): New operand type for base register operand.
2969 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2970 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2971 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2973 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2974 10 char field, padded with spaces on rhs, rather than a string
2975 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2976 than old TIC80_OPERAND_RELATIVE. Add support for new
2977 TIC80_OPERAND_BASEREL flag bit.
2979 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2981 * tic80-dis.c (print_insn_tic80): Print floating point operands
2983 * tic80-opc.c (SPFI): Add single precision floating point
2984 immediate operand type.
2985 (ROTATE): Add rotate operand type for shifts.
2986 (ENDMASK): Add for shifts.
2987 (n): Macro for the 'n' bit.
2988 (i): Macro for the 'i' bit.
2989 (PD): Macro for the 'PD' field.
2990 (P2): Macro for the 'P2' field.
2991 (P1): Macro for the 'P1' field.
2992 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2996 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2998 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2999 adding in current address for pc-relative operands.
3001 start-sanitize-tic80
3002 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
3004 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
3005 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
3006 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
3007 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
3008 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
3009 REG_BASE_M_SI, REG_BASE_M_LI respectively.
3010 (REG_SCALED, LSI_SCALED): New operand types.
3011 (E): New macro for 'E' bit at bit 27.
3012 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
3013 opcodes, including the various size flavors (b,h,w,d) for
3014 the direct load and store instructions.
3016 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
3018 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
3020 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
3021 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
3022 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
3023 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
3024 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
3025 masks with "MASK_* & ~M_*" to get the M bit reset.
3026 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
3028 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
3030 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
3031 correctly. Add support for printing TIC80_OPERAND_BITNUM and
3032 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
3034 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
3035 CC, SICR, and LICR table entries.
3036 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
3037 "bcnd", and "brcr" opcodes.
3040 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
3042 * ppc-opc.c (powerpc_operands): Make comment match the
3043 actual fields (no shift field).
3044 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
3045 start-sanitize-tic80
3046 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
3047 partial implementation, work in progress.
3048 * tic80-opc.c (tic80_operands): Begin construction operands table.
3049 (tic80_opcodes): Continue populating opcodes table and start
3050 filling in the operand indices.
3051 (tic80_num_opcodes): Add this.
3054 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
3056 * m68k-opc.c: Add #B case for moveq.
3058 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
3060 * mn10300-dis.c (disassemble): Make sure all variables are initialized
3061 before they are used.
3063 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
3065 * v850-opc.c (v850_opcodes): Put curly-braces around operands
3066 for "breakpoint" instruction.
3068 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
3070 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
3071 (dep): Use ALL_CFLAGS rather than CFLAGS.
3073 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3075 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
3078 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
3080 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
3081 start-sanitize-tic80
3082 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
3085 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
3087 * mips16-opc.c: Add "abs".
3089 start-sanitize-tic80
3090 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
3092 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
3093 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
3094 (disassembler): Add bfd_arch_tic80 support to set disassemble
3095 to print_insn_tic80.
3096 * tic80-dis.c (print_insn_tic80): Add stub.
3098 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
3100 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
3101 * configure: Regenerate with autoconf.
3102 * tic80-dis.c: Add file.
3103 * tic80-opc.c: Add file.
3106 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3108 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
3110 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
3112 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
3113 (mn10200_opcodes): Use it for some logicals and btst insns.
3114 Add "break" and "trap" instructions.
3116 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
3118 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
3120 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
3122 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
3123 relative load or add now depends upon whether the instruction is
3126 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
3128 * mn10200-dis.c: Finish writing disassembler.
3129 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
3130 Fix mask for "jmp (an)".
3132 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
3133 handle endianness issues for mn10300.
3135 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3137 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3139 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3140 instruction. Fix opcode field for "movb (imm24),dn".
3142 * mn10200-opc.c (mn10200_operands): Fix insertion position
3145 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3147 * mn10200-opc.c: Create mn10200 opcode table.
3148 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3149 but moving along nicely.
3151 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3153 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3155 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3157 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3158 specifiers for fmovem* instructions.
3160 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3162 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3164 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3166 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3169 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3171 * mn10300-opc.c: Add some comments explaining the various
3174 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3176 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3178 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3181 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3182 operand specifiers in fmovm* instructions.
3184 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3186 * ppc-opc.c (insert_li): Give an error if the offset has the two
3187 least significant bits set.
3189 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3191 * mips-dis.c (print_insn_mips16): Separate the instruction from
3192 the arguments with a tab, not a space.
3194 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3196 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3199 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3202 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3204 * configure: Rebuild with autoconf 2.12.
3206 Add support for mips16 (16 bit MIPS implementation):
3207 * mips16-opc.c: New file.
3208 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3209 (mips16_reg_names): New static array.
3210 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3211 after seeing a 16 bit symbol.
3212 (print_insn_little_mips): Likewise.
3213 (print_insn_mips16): New static function.
3214 (print_mips16_insn_arg): New static function.
3215 * mips-opc.c: Add jalx instruction.
3216 * Makefile.in (mips16-opc.o): New target.
3217 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3218 * configure: Rebuild.
3220 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3222 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3223 operand specifiers in *save, *restore and movem* instructions.
3225 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3228 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3229 register operands for immediate arithmetic, not, neg, negx, and
3230 set according to condition instructions.
3232 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3233 specifier of the effective-address operand in immediate forms of
3234 arithmetic instructions. The specifier for the immediate operand
3235 notes how and where the constant will be stored.
3237 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3239 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3242 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3245 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3247 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3249 * mn10300-dis.c (disassemble): Handle register lists.
3251 * mn10300-opc.c: Fix handling of register list operand for
3252 "call", "ret", and "rets" instructions.
3254 * mn10300-dis.c (disassemble): Print PC-relative and memory
3255 addresses symbolically if possible.
3256 * mn10300-opc.c: Distinguish between absolute memory addresses,
3257 pc-relative offsets & random immediates.
3259 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3261 (disassemble): Handle SPLIT and EXTENDED operands.
3263 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3265 * mn10300-dis.c: Rough cut at printing some operands.
3267 * mn10300-dis.c: Start working on disassembler support.
3268 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3270 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3272 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3274 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3276 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3278 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3280 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3281 register argument is calls and jmp instructions.
3283 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3285 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3286 getx operand. Fix opcode for mulqu imm,dn.
3288 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3290 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3291 in MN10300_OPERAND_SPLIT operands for how many bits
3292 appear in the basic insn word. Add IMM32_HIGH24,
3293 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3294 (mn10300_opcodes): Use new operands as needed.
3296 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3297 for bset, bclr, btst instructions.
3298 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3300 * mn10300-opc.c (mn10300_operands): Remove many redundant
3301 operands. Update opcode table as appropriate.
3302 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3303 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3305 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3307 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3308 operands (for indexed load/stores). Fix bitpos for DI
3309 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3310 few instructions that insert immediates/displacements in the
3311 middle of the instruction. Add IMM8E for 8 bit immediate in
3312 the extended part of an instruction.
3313 (mn10300_operands): Use new opcodes as appropriate.
3315 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3317 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3318 sequential so the assembler never parallelizes it with
3321 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3323 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3324 a data/address register that appears in register field 0
3325 and register field 1.
3326 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3328 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3330 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3331 standard disassembly.
3333 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3334 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3335 Recategorize PALcode instructions.
3337 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3339 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3341 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3343 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3344 there are no operand types.
3346 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3348 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3350 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3352 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3354 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3356 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3358 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3359 and sst.w instructions.
3361 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3364 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3366 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3369 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3371 * ppc-opc.c (PPCPWR2): Define.
3372 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3375 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3377 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3378 field for movhu instruction.
3380 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3381 cast value to "long" not "signed long" to keep hpux10
3384 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3386 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3389 * mn10300-opc.c (FMT*): Remove definitions.
3391 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3392 for shift-by-register opcodes.
3394 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3395 into [AD][MN][01] for encoding the position of the register
3398 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3400 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3401 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3403 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3405 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3406 Fix various typos. Add "PAREN" operand.
3407 (MEM, MEM2): Define.
3408 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3409 operands. Fix several typos.
3411 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3414 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3416 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3417 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3419 (mn10300_opcodes): Break opcode format out into its own field.
3420 Update many operand fields to deal with signed vs unsigned
3421 issues. Fix one or two typos in the "mov" instruction
3422 opcode, mask and/or operand fields.
3424 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3426 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3427 m68851 wasn't reset.
3429 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3431 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3432 all opcodes. Very rough cut at operands for all opcodes.
3434 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3437 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3439 * mn10200-opc.c, mn10300-opc.c: New files.
3440 * mn10200-dis.c, mn10300-dis.c: New files.
3441 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3442 * disassemble.c: Break mn10x00 support into 10200 and 10300
3444 * configure.in: Likewise.
3445 * configure: Rebuilt.
3447 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3449 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3451 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3453 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3455 * disassemble (ARCH_mn10x00): Define.
3456 (disassembler): Handle bfd_arch_mn10x00.
3457 * configure.in: Recognize bfd_mn10x00_arch.
3458 * configure: Rebuilt.
3460 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3462 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3463 accordingly. Don't declare functions using op_rtn.
3465 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3467 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3468 params to be more standard.
3469 * (disassemble): Print absolute addresses and symbolic names for
3470 branch and jump targets.
3471 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3473 * (v850_opcodes): Add breakpoint insn.
3475 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3477 * m68k-opc.c: Move the fmovemx data register cases before the
3478 other cases, so that they get recognized before the data register
3479 does gets treated as a degenerate register list.
3481 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3483 * mips-opc.c: Add a case for "div" and "divu" with two registers
3484 and a destination of $0.
3486 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3488 * mips-dis.c (print_insn_arg): Add prototype.
3489 (_print_insn_mips): Ditto.
3491 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3493 * mips-dis.c (print_insn_arg): Print condition code registers as
3496 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3498 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3500 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3502 * v850-dis.c (disassemble): Make static. Provide prototype.
3504 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3506 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3509 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3511 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3512 ']' characters into the output stream.
3513 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3514 Add "memop" field to all opcodes (for the disassembler).
3515 Reorder opcodes so that "nop" comes before "mov" and "jr"
3516 comes before "jarl".
3518 * v850-dis.c (print_insn_v850): Fix typo in last change.
3520 * v850-dis.c (print_insn_v850): Properly handle disassembling
3521 a two byte insn at the end of a memory region when the memory
3522 region's size is only two byte aligned.
3524 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3526 * v850-dis.c (v850_reg_names): Define.
3527 (v850_sreg_names, v850_cc_names): Likewise.
3528 (disassemble): Very rough cut at printing operands (unformatted).
3530 * v850-opc.c (BOP_MASK): Fix.
3531 (v850_opcodes): Fix mask for jarl and jr.
3533 * v850-dis.c: New file. Skeleton for disassembler support.
3534 * Makefile.in Remove v850 references, they're not needed here.
3535 * configure.in: Add v850-dis.o when building v850 toolchains.
3536 * configure: Rebuilt.
3537 * disassemble.c (disassembler): Call v850 disassembler.
3539 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3540 (insert_d8_6, extract_d8_6): New functions.
3541 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3542 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3544 (IF4A, IF4B): Use "D7" instead of "D7S".
3545 (IF4C, IF4D): Use "D8_7" instead of "D8".
3546 (IF4E, IF4F): New. Use "D8_6".
3547 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3548 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3550 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3551 (v850_operands): Change D16 to D16_15, use special insert/extract
3552 routines. New new D16 that uses the generic insert/extract code.
3553 (IF7A, IF7B): Use D16_15.
3554 (IF7C, IF7D): New. Use D16.
3555 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3557 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3558 message. Issue an error if the branch offset is odd.
3560 * v850-opc.c: Add notes about needing special insert/extract
3561 for all the load/store insns, except "ld.b" and "st.b".
3563 * v850-opc.c (insert_d22, extract_d22): New functions.
3564 (v850_operands): Use insert_d22 and extract_d22 for
3566 (insert_d9): Fix range check.
3568 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3570 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3571 and set bits field to D9 and D22 operands.
3573 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3575 * v850-opc.c (v850_operands): Define SR2 operand.
3576 (v850_opcodes): "ldsr" uses R1,SR2.
3578 * v850-opc.c (v850_opcodes): Fix opcode specs for
3579 sld.w, sst.b, sst.h, sst.w, and nop.
3581 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3583 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3584 end of the opcode table.
3586 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3588 * d10v-opc.c (pre_defined_registers): Added register pairs,
3589 "r0-r1", "r2-r3", etc.
3591 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3593 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3594 Create I16U for an unsigned 16bit mmediate operand.
3595 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3597 * v850-opc.c (v850_operands): Define EP operand.
3598 (IF4A, IF4B, IF4C, IF4D): Use EP.
3600 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3601 with immediate operand, "movhi". Tweak "ldsr".
3603 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3604 correct. Get sld.[bhw] and sst.[bhw] closer.
3606 * v850-opc.c (v850_operands): "not" is a two byte insn
3608 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3610 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3612 * v850-opc.c (two): Get order of words correct.
3614 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3616 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3617 register source and destination operands.
3618 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3620 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3621 same thinko in "trap" opcode.
3623 * v850-opc.c (v850_opcodes): Add initializer for size field
3626 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3627 Add D8 for 8-bit unsigned field in short load/store insns.
3628 (IF4A, IF4D): These both need two registers.
3629 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3630 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3631 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3632 for "ldsr" and "stsr".
3633 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3636 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3637 short store word (sst.w).
3639 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3641 * v850-opc.c (v850_operands): Added insert and extract fields,
3642 pointers to functions that handle unusual operand encodings.
3644 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3646 * v850-opc.c (v850_opcodes): Enable "trap".
3648 * v850-opc.c (v850_opcodes): Fix order of displacement
3649 and register for "set1", "clr1", "not1", and "tst1".
3651 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3653 * v850-opc.c (v850_operands): Add "B3" support.
3654 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3657 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3659 * v850-opc.c: Close unterminated comment.
3661 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3663 * v850-opc.c (v850_operands): Add flags field.
3664 (v850_opcodes): add move opcodes.
3666 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3668 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3669 * configure: (bfd_v850v_arch) Add new case.
3670 * configure.in: (bfd_v850_arch) Add new case.
3671 * v850-opc.c: New file.
3673 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3675 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3677 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3679 * d10v-opc.c: Add additional information to the opcode
3680 table to help determinine which instructions can be done
3683 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3685 * mpw-make.sed: Update editing of include pathnames to be
3688 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3690 * arm-opc.h: Added "bx" instruction definition.
3692 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3694 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3696 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3698 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3700 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3702 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3704 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3706 * makefile.vms: Update for alpha-opc changes.
3708 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3710 * i386-dis.c (print_insn_i386): Actually return the correct value.
3711 (ONE, OP_ONE): #ifdef out; not used.
3713 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3715 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3716 Changed subi operand type to treat 0 as 16.
3718 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3720 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3723 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3725 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3726 memory transfer instructions. Add new format string entries %h and %s.
3727 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3730 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3732 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3733 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3735 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3737 * alpha-dis.c (print_insn_alpha_osf): Remove.
3738 (print_insn_alpha_vms): Remove.
3739 (print_insn_alpha): Make globally visible. Chose the register
3740 names based on info->flavour.
3741 * disassemble.c: Always return print_insn_alpha for the alpha.
3743 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3745 * d10v-dis.c (dis_long): Handle unknown opcodes.
3747 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3749 * d10v-opc.c: Changes to support signed and unsigned numbers.
3750 All instructions with the same name that have long and short forms
3751 now end in ".l" or ".s". Divs added.
3752 * d10v-dis.c: Changes to support signed and unsigned numbers.
3754 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3756 * d10v-dis.c: Change all functions to use info->print_address_func.
3758 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3760 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3761 move ccr/sr insns more strict so that the disassembler only
3762 selects them when the addressing mode is data register.
3764 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3765 * d10v-opc.c (pre_defined_registers): Declare.
3766 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3767 to pick a better name for the registers.
3769 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3771 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3772 operands for fexpand and fpmerge. From Christian Kuehnke
3773 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3775 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3777 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3778 print routine. Take new regnames and cpumask arguments.
3779 Kill the environment variable nonsense.
3780 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3781 (print_insn_alpha_vms): New function. Do VMS style regnames.
3782 * disassemble.c (disassembler): Test bfd flavour to pick
3783 between OSF and VMS routines. Default to OSF.
3785 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3787 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3788 * configure: Rebuild.
3789 * Makefile.in (install): Use @INSTALL_SHLIB@.
3791 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3793 * configure: (bfd_d10v_arch) Add new case.
3794 * configure.in: (bfd_d10v_arch) Add new case.
3795 * d10v-dis.c: New file.
3796 * d10v-opc.c: New file.
3797 * disassemble.c (disassembler) Add entry for d10v.
3799 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3801 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3802 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3804 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3806 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3807 distinguish between variants of the instruction set.
3808 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3809 distinguish between variants of the instruction set.
3811 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3813 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3814 the 8086 instruction set.
3815 * i386-dis.c: General cleanups. Make most things static. Add
3816 prototypes. Get rid of static variables aflags and dflags. Pass
3817 them as args (to almost everything).
3819 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3821 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3823 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3825 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3826 if the next arg is marked with SRC_IN_DST. Gross.
3828 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3829 we're looking for and find EXR.
3831 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3832 if we're looking for KBIT and we don't find it.
3834 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3837 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3838 3bit immediate operands.
3840 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3842 * Released binutils 2.7.
3844 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3845 <kkaempf@progis.ac-net.de>.
3847 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3849 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3851 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3853 * sparc-dis.c (print_insn_sparclite): New routine to print
3854 sparclite instructions.
3856 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3858 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3860 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3862 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3863 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3864 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3866 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3868 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3869 Use autoconf-set values.
3870 (docdir, oldincludedir): Removed.
3871 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3873 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3875 * alpha-opc.c: New file.
3876 * alpha-opc.h: Remove.
3877 * alpha-dis.c: Complete rewrite to use new opcode table.
3878 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3879 * configure: Rebuild with autoconf 2.10.
3880 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3881 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3883 (alpha-opc.o): New target.
3885 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3887 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3888 Set imm_added_to_rs1 even if the source and destination register
3891 * sparc-opc.c: Add some two operand forms of the wr instruction.
3893 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3895 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3898 * disassemble.c (disassembler): Handle H8/S.
3899 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3901 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3903 * sparc-opc.c: Add beq/teq as aliases for be/te.
3905 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3906 <sergei@msil.sps.mot.com>.
3908 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3910 * makefile.vms: New file.
3912 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3914 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3916 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3919 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3921 * i386-dis.c (OP_OFF): Call append_prefix.
3923 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3925 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3926 unsigned long to silence a warning from the Solaris PowerPC
3929 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3931 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3933 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3935 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3937 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3938 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3939 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3940 cpush, cpusha, cpull sparclet insns.
3942 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3944 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3946 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3948 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3949 Set F_FLOAT on other floating point instructions.
3951 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3953 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3955 (powerpc_opcodes): Add 860/821 specific SPRs.
3957 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3959 * configure.in: Permit --enable-shared to specify a list of
3960 directories. Set and substitute BFD_PICLIST.
3961 * configure: Rebuild.
3962 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3963 uses. Set to @BFD_PICLIST@.
3965 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3967 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3968 not "abs", which may be needed for the absolute in something
3969 like btst #0,@10:8. Print L_3 immediates separately from other
3970 immediates. Change ABSMOV reference to ABS8MEM.
3972 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3974 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3975 (current_arch_mask): New static global.
3976 (compute_arch_mask): New static function.
3977 (print_insn_sparc): Delete sparc_v9_p. New static local
3978 current_mach. Resort opcode table if current_mach changes.
3979 Generalize "insn not supported" test.
3980 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3981 Delete test for v9/!v9.
3982 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3984 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3985 (brfcx): Renamed to FBRX.
3986 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3987 coprocessor mnemonics are not supported on the sparclet).
3988 (condf): Renamed to CONDF.
3989 (SLCBCC2): Delete F_ALIAS flag.
3991 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3993 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3994 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3996 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3998 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3999 that the shared library version number is set correctly.
4001 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
4003 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
4004 Miles Bader <miles@gnu.ai.mit.edu>.
4005 * configure: Rebuild.
4007 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
4009 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
4012 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
4014 * configure: Rebuild with autoconf 2.8.
4016 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
4018 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
4019 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
4021 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
4023 * configure.in: Don't set SHLIB or SHLINK to an empty string,
4024 since they appear as targets in Makefile.in.
4025 * configure: Rebuild.
4027 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
4029 * mpw-make.sed: Edit out shared library support bits.
4031 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
4033 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
4034 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
4035 (sparc_opcodes): Add sparclet insns.
4036 (sparclet_cpreg_table): New static local.
4037 (sparc_{encode,decode}_sparclet_cpreg): New functions.
4038 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
4040 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
4042 * i386-dis.c (index16): New static variable.
4043 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
4045 (OP_indirE): Return result of OP_E.
4046 (OP_E): Check for 16 bit addressing mode, and disassemble
4047 correctly. Optimised 32 bit case a little. Don't print
4048 "(base,index,scale)" when sib specifies only an offset.
4050 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
4052 * configure.in: Set and substitute SHLIB_DEP.
4053 * configure: Rebuild.
4054 * Makefile.in (SHLIB_DEP): New variable.
4055 (LIBIBERTY_LISTS, BFD_LIST): New variables.
4056 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
4057 COMMON_SHLIB, add them to piclist with appropriate modifications.
4058 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
4059 here: just use piclist.
4061 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
4063 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
4064 (print_insn_sparc): Rewrite v9/not-v9 tests.
4065 (compare_opcodes): Likewise.
4066 * sparc-opc.c (MASK_<ARCH>): Define.
4067 (v6,v7,v8,sparclite,v9,v9a): Redefine.
4068 (sparclet,v6notv9): Define.
4069 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
4070 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
4072 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
4074 * configure.in: Call AC_PROG_CC before configure.host.
4075 * configure: Rebuild.
4077 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
4079 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
4081 * i386-dis.c (onebyte_has_modrm): New static array.
4082 (twobyte_has_modrm): New static array.
4083 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
4085 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
4087 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
4090 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
4092 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
4095 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
4097 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
4098 m68010up, not just m68020up | cpu32.
4100 * Makefile.in (SONAME): New variable.
4101 ($(SHLINK)): Make a link to the transformed name, as well.
4102 (stamp-tshlink): New target.
4103 (install): Skip stamp-tshlink during install.
4105 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
4107 * configure.in: Call AC_ARG_PROGRAM.
4108 * configure: Rebuild.
4109 * Makefile.in (program_transform_name): New variable.
4110 (install): Transform library name before installing it.
4112 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
4114 * i960-dis.c (mem): Add HX dcinva instruction.
4116 Support for building as a shared library, based on patches from
4117 Alan Modra <alan@spri.levels.unisa.edu.au>:
4118 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
4119 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
4120 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
4121 * configure: Rebuild.
4122 * Makefile.in (ALLLIBS): New variable.
4123 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
4124 (COMMON_SHLIB, SHLINK): New variables.
4125 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
4126 (STAGESTUFF): Remove variable.
4127 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
4128 (stamp-piclist, piclist): New targets.
4129 ($(SHLIB), $(SHLINK)): New targets.
4130 ($(OFILES)): Depend upon stamp-picdir.
4131 (disassemble.o): Build twice if PICFLAG is set.
4132 (MOSTLYCLEAN): Add pic/*.o.
4133 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4134 (distclean): Remove pic and stamp-picdir.
4135 (install): Install shared libraries.
4136 (stamp-picdir): New target.
4138 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4140 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4141 Print unknown instruction as "unknown", rather than in hex.
4143 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4145 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4147 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4149 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4151 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4153 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4154 when necessary. From Ulrich Drepper
4155 <drepper@myware.rz.uni-karlsruhe.de>.
4157 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4159 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4160 sparc_num_opcodes. Update architecture enum values.
4161 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4162 (sparc_opcode_lookup_arch): New function.
4163 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4164 (sparc_opcodes): Add v9a shutdown insn.
4166 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4168 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4169 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4171 (print_insn_sparc64): Deleted.
4172 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4175 * sparc-opc.c (architecture_pname): Add v9a.
4177 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4179 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4180 incorrectly defined as 0x16 when it should be 0x15.
4181 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4182 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4183 excb (exception barrier) which is defined in the Alpha
4184 Architecture Handbook version 2.
4185 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4186 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4187 disassembled as or, for example.
4189 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4191 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4192 (_print_insn_mips): Change i from int to unsigned int.
4194 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4196 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4197 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4199 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4201 * i386-dis.c: Added Pentium Pro instructions.
4203 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4205 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4208 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4210 * sh-opc.h (sh_nibble_type): Added REG_B.
4211 (sh_arg_type): Added A_REG_B.
4212 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4214 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4216 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4218 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4220 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4222 * Makefile.in (distclean): Remove stamp-h. From Ronald
4223 F. Guilmette <rfg@monkeys.com>.
4225 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4227 From David Mosberger-Tang <davidm@azstarnet.com>:
4228 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4231 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4233 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4234 (sh_table): Added many SH3 opcodes.
4235 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4237 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4239 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4240 (subco,subco.): Mark this PPC, not PPCCOM.
4242 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4244 * configure: Rebuild with autoconf 2.7.
4246 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4248 * configure: Rebuild with autoconf 2.6.
4250 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4252 * configure.in: Sort list of architectures. Accept but do nothing
4253 for alliant, convex, pyramid, romp, and tahoe.
4255 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4257 * a29k-dis.c (print_special): Change num to unsigned int.
4259 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4261 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4264 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4266 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4267 * configure: Rebuilt.
4269 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4271 * configure.in: Add case for bfd_i860_arch.
4272 * configure: Rebuild.
4274 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4276 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4277 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4278 (NEXTDOUBLE): Likewise.
4279 (print_insn_m68k): Don't match fmoveml if there is more than one
4280 register in the list.
4281 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4283 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4285 * m68k-opc.c: Use #W rather than #w.
4286 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4288 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4290 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4291 and likewise for all the dbxx opcodes.
4293 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4295 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4297 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4299 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4300 the VR4100 specific instructions to the mips_opcodes structure.
4302 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4304 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4305 ugly Metrowerks bug in CW6, is fixed in CW7.
4307 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4309 * ppc-opc.c (whole file): Add flags for common/any support.
4311 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4313 * Makefile.in (BISON): Remove macro.
4314 (FLAGS_TO_PASS): Remove BISON.
4316 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4318 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4320 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4321 instructions that take no args by looking at the match mask.
4322 (print_insn_arg): Always print "%" before register names.
4323 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4324 [case '_']: Don't print "@#" before address.
4325 [case 'J']: Use "%s" as format string, not register name.
4326 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4328 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4330 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4333 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4335 From David Mosberger-Tang <davidm@azstarnet.com>
4337 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4338 (alpha_insn_set): added definitions for VAX floating point
4339 instructions (Unix compilers don't generate these, but handcoded
4340 assembly might still use them).
4342 * alpha-dis.c (print_insn_alpha): added support for disassembling
4343 the miscellaneous instructions in the Alpha instruction set.
4345 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4347 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4348 no longer create sysdep.h, sed ppc-opc.c to work around a
4349 serious Metrowerks C bug.
4350 * mpw-make.in: Remove.
4351 * mpw-make.sed: New file, used by mpw-configure to edit
4352 Makefile.in into an MPW makefile.
4354 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4356 * Makefile.in (maintainer-clean): New synonym for realclean.
4358 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4360 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4361 which use '0', '1', and '2' instead. Specify the proper size for
4362 a pmove immediate operand. Correct the pmovefd patterns to be
4363 moves to a register, not from a register.
4364 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4366 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4368 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4369 %psr, %wim, %tbr as F_NOTV9.
4371 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4373 * Makefile.in (Makefile): Just rebuild Makefile when running
4375 (config.h, stamp-h): New targets.
4376 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4377 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4378 rebuilding config.h.
4379 * configure: Rebuild.
4381 * mips-opc.c: Change unaligned loads and stores with "t,A"
4382 operands to use "t,A(b)".
4384 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4386 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4388 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4390 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4391 until 3 instead of until 2.
4393 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4395 * Makefile.in (ALL_CFLAGS): Define.
4396 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4397 (MOSTLYCLEAN): Add config.log.
4398 (distclean): Don't remove config.log.
4399 * configure.in: Substitute HDEFINES.
4400 * configure: Rebuild.
4402 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4404 * sh-opc.h (sh_arg_type): Add F_FR0.
4405 (sh_table, case fmac): Add F_FR0 as first argument.
4407 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4409 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4411 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4413 * sparc-dis.c: Remove all references to NO_V9.
4415 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4417 * aclocal.m4: Just include ../bfd/aclocal.m4.
4418 * configure: Rebuild.
4420 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4422 * sparc-dis.c (X_DISP19): Define.
4423 (print_insn, case 'G'): Use it.
4424 (print_insn, case 'L'): Sign extend displacement.
4426 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4428 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4429 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4430 host_makefile_frag or frags.
4431 * aclocal.m4: New file.
4432 * configure: Rebuild.
4433 * Makefile.in (INSTALL): Set to @INSTALL@.
4434 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4435 (INSTALL_DATA): Set to @INSTALL_DATA@.
4437 (AR_FLAGS): Set to rc rather than qc.
4438 (CC): Define as @CC@.
4439 (CFLAGS): Set to @CFLAGS@.
4440 (@host_makefile_frag@): Remove.
4441 (config.status): Remove dependency upon @frags@.
4443 * configure.in: ../bfd/config.bfd now just sets shell variables.
4444 Use them rather than looking through target Makefile fragments.
4445 * configure: Rebuild.
4447 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4449 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4451 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4453 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4454 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4457 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4458 (lookup_{name,value}): New functions.
4459 (prefetch_table): New static local.
4460 (sparc_{encode,decode}_prefetch): New functions.
4461 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4463 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4465 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4468 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4470 * sh-dis.c: Correct comment on first line of file.
4472 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4474 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4476 * sparc-opc.c (asi, membar): New static locals.
4477 (sparc_{encode,decode}_{asi,membar}): New functions.
4478 (sparc_opcodes, membar insn): Fix.
4479 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4480 Support decoding of membar masks.
4483 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4485 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4487 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4489 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4490 and likewise for the other branches. Add bhs as an alias for bcc,
4491 and likewise for the size variants. Add dbhs as an alias for
4494 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4496 * sh-opc.h (FP sts instructions): Update to match reality.
4498 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4500 * m68k-dis.c: (fpcr_names): Add % before all register names.
4501 (reg_names): Likewise.
4502 (print_insn_arg): Don't explicitly print % before register names.
4503 Add % before register names in static array names. In case 'r',
4504 print data registers as `@(Dn)', not `Dn@'. When printing a
4505 memory address, don't print @# before it.
4506 (print_indexed): Change base_disp and outer_disp from int to
4507 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4508 syntax. Sign extend 8 byte displacement correctly.
4509 (print_base): Print using MIT syntax. Print zpc when appropriate.
4510 Change parameter disp from int to bfd_vma.
4512 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4515 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4517 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4518 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4519 * sh-opc.h (sh_arg_type): Add new operand types.
4520 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4522 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4524 * Makefile.in (distclean): Remove generated file config.h.
4526 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4528 * Makefile.in (distclean): Remove generated file config.h.
4530 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4532 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4534 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4536 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4537 rather than numopcodes. Use m68k_opcodes rather than removed
4538 opcode function. Don't check F_ALIAS.
4539 (print_insn_arg): Change first parameter to be const char *.
4540 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4541 (m68k-opc.o): New target.
4542 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4543 * configure: Rebuild.
4545 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4547 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4548 (opcode_bits, opcode_hash_table): New variables.
4549 (opcodes_initialized): Renamed from opcodes_sorted.
4550 (build_hash_table): New function.
4551 (is_delayed_branch): Use hash table.
4552 (print_insn): Renamed from print_insn_sparc, made static.
4553 Build and use hash table. If !sparc64, ignore sparc64 insns,
4554 and vice-versa if sparc64.
4555 (print_insn_sparc, print_insn_sparc64): New functions.
4556 (compare_opcodes): Move sparc64 opcodes to end.
4557 Print commutative insns with constant second.
4558 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4560 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4562 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4563 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4564 avoids printing a delay slot in a delay slot.
4565 * sh-opc.h (sh_table): Fully bracket last entry.
4567 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4569 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4571 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4573 * configure.in: Get host_makefile_frag from ${srcdir}.
4575 * configure.in: Autoconfiscated. Check for string[s].h. Create
4576 config.h from config.in. Don't set up sysdep.h link.
4577 * sysdep.h: New file.
4578 * configure, config.in: New files, generated from configure.in.
4579 * Makefile.in: Updated to be processed autoconf-style.
4580 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4581 (Makefile): Depend on config.status.
4582 (config.status): New rule.
4583 * configure.bat: Update Makefile substitutions.
4585 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4587 * mips-opc.c (L1): Define.
4588 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4589 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4592 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4594 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4595 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4596 have multiple add units but only a single logical unit.
4598 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4599 shifted by 18, without any insertion or extraction function.
4600 (insert_cr, extract_cr): Remove.
4602 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4604 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4607 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4609 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4610 * sh-opc.h: Add copyright.
4612 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4614 * Makefile.in (crunch-m68k): Delete extra target accidentally
4615 checked in a while ago.
4617 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4619 * sh-opc.h (sh_table): Add SH3 support.
4621 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4623 * sh-opc.h: Added bsrf and braf.
4625 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4627 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4628 bogus [ls]fm{ea,fd} patterns.
4630 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4631 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4632 initialize it from memory. Make function static.
4633 (print_insn_{big,little}_arm): New functions.
4634 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4635 the correct endianness.
4637 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4639 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4642 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4644 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4645 17th, so that it builds again using GCC as the compiler.
4647 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4649 * mips-dis.c (print_insn_little_mips): Cast return value from
4650 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4651 expects an unsigned long, and that might be fewer words of
4652 argument storage (e.g., if bfd_vma is long long on a 32-bit
4654 (print_insn_big_mips): Likewise with bfd_getb32 value.
4655 (_print_insn_mips): Now static.
4657 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4659 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4660 gcc memory hog problem with initializer is fixed.
4662 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4664 Merge in support for Mac MPW as a host.
4665 (Old change descriptions retained for informational value.)
4667 * mpw-config.in (archname): Compute from the config.
4668 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4670 * mpw-config.in (target_arch): Compute from canonical target.
4671 (m68k, mips, powerpc, sparc): Add architectures.
4672 * mpw-make.in (disassemble.c.o): Add.
4673 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4675 * mpw-config.in (BFD_MACHINES): Set to a default value.
4676 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4678 * mpw-make.in (CSEARCH): Add extra-include to search path.
4680 * mpw-config.in (varargs.h): Don't create.
4681 (sysdep.h): Create using forward-include.
4682 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4684 * mpw-config.in: New file, MPW version of configure.in.
4685 * mpw-make.in: New file, MPW version of Makefile.in.
4687 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4689 * alpha-dis.c (print_insn_alpha): Put empty statement after
4692 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4694 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4695 (low_sign_extend): Likewise.
4696 (get_field): Delete unused function.
4697 (set_field, deposit_14, deposit_21): Likewise.
4699 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4701 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4704 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4706 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4708 * alpha-opc.h (OSF_ASMCODE): define
4709 print pal-code names as defined in App C of the
4710 Alpha Architecture Reference Manual
4712 * alpha-dis.c: cleaned up output
4713 print stylized code forms as defined in App A.4.3 of the
4714 Alpha Architecture Reference Manual
4716 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4718 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4720 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4723 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4725 * m68k-dis.c (opcode): New function. Returns address of opcode
4726 table entry given index, even if the opcode table was split to
4727 work around gcc bugs.
4728 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4730 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4731 (reg_names): Now const.
4732 (print_insn_arg): Arrays cacheFieldName and names now const.
4733 (print_indexed): Array scales now const.
4735 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4737 * ppc-opc.c: Sort recently added instructions by minor opcode
4738 number within major opcode number.
4740 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4742 * hppa-dis.c: Include libhppa.h.
4744 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4746 * mips-opc.c: Change dli to use M_DLI, and add dla.
4748 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4750 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4752 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4754 * mips-opc.c: Add r4650 mul instruction.
4756 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4758 * mips-opc.c: Add uld and usd macros for unaligned double load and
4761 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4763 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4764 mfdcr, mtdcr, icbt, iccci.
4766 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4768 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4769 signed char fields to shorts, more portable.
4771 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4773 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4774 char fields as signed chars, since they may have negative values.
4776 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4778 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4779 (mycroft@netbsd.org).
4781 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4783 From "Logg, Ed" <elogg@ea.com>:
4784 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4785 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4788 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4790 * ppc-opc.c: Changes based on patch from David Edelsohn
4791 <edelsohn@mhpcc.edu>.
4792 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4795 (insert_tbr): New static function.
4796 (extract_tbr): New static function.
4797 (XFXFXM_MASK, XFXM): Define.
4798 (XSPRBAT_MASK, XSPRG_MASK): Define.
4799 (powerpc_opcodes): Add instructions to access special registers by
4800 name. Add mtcr and mftbu.
4802 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4804 * mips-opc.c (P3): Define.
4805 (mips_opcodes): Add mad and madu.
4807 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4809 * configure.in: Add W65 support.
4810 * disassemble.c: Likewise.
4811 * w65-opc.h, w65-dis.c: New files.
4813 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4815 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4818 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4820 * mips-opc.c: Add dli as a synonym for li.
4822 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4824 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4825 print something for reserved opcode values, even if it won't
4828 * mips-dis.c (_print_insn_mips): When initializing, shift right
4829 and mask, to avoid sign extension problems on the Alpha.
4831 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4834 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4836 * sh-opc.h (mov.l gbr): Get direction right.
4837 * sh-dis.c (print_insn_shx): New function.
4838 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4839 print opcodes with right byte order.
4841 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4843 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4844 to avoid conflicts with getopt.
4846 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4848 * hppa-dis.c (print_insn_hppa): Read the instruction using
4849 bfd_getb32, so that it works on a little endian or 64 bit host.
4850 Remove unused local variable op.
4852 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4854 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4855 addu does not work correctly if -mips3.
4857 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4859 * a29k-dis.c (print_special): Add special register names defined
4860 on 29030, 29040 and 29050.
4861 (print_insn): Handle new operand type 'I'.
4863 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4865 * Makefile.in (INSTALL): Use top level install.sh script.
4867 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4869 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4870 that it works on a little endian host.
4872 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4874 * configure.in: Use ${config_shell} when running config.bfd.
4876 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4878 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4880 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4882 * a29k-dis.c (print_insn): Print the opcode.
4884 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4886 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4888 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4890 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4892 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4894 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4895 which store a value into memory.
4897 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4899 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4900 * arm-dis.c, arm-opc.h: New files.
4902 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4904 * Makefile.in (ns32k-dis.o): Add dependency.
4905 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4906 string, not as array of chars.
4908 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4910 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4912 * sparc-opc.c: Added sparclite extended FP operations, and
4913 versions of v9 impdep* instructions permitting specification of
4916 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4918 * i960-dis.c (reg_names): Now const.
4919 (struct sparse_tabent): New type, copied from array type in mem
4921 (ctrl): Local static array ctrl_tab now const.
4922 (cobr): Local static array cobr_tab now const.
4923 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4924 static variable mem_tab no longer explicitly initialized. Changed
4925 mem_init to const array of struct sparse_tabent.
4926 (reg): Local static variable reg_tab no longer explicitly
4927 initialized. Changed reg_init to const array of struct
4929 (ea): Local static array scale_tab now const.
4931 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4934 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4936 * configure.bat: the disassember needs to be enabled for
4937 "objdump -d" to work in djgpp.
4939 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4941 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4942 (invalid_float): Enabled general version, doesn't require running
4943 on ns32k host. Changed to take char* argument, and test for
4944 explicitly specified sizes, instead of using sizeof() on host CPU
4946 (INVALID_FLOAT): Cast first argument.
4947 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4948 list_P032, list_M032): Now const.
4949 (optlist, list_search): Made appropriate arguments now point to
4951 (print_insn_arg): Changed static array of one-character-string
4952 pointers into a static const array of characters; fixed sprintf
4953 statement accordingly.
4955 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4957 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4958 from distribution. A ns32k-dis.c from a previous distribution has
4959 been brought up to date and supports the new interface.
4961 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4963 * configure.in: add bfd_ns32k_arch target support.
4965 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4966 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4968 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4970 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4973 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4975 * h8300-dis.c, mips-dis.c: Don't use true and false.
4977 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4979 * configure.in: Change --with-targets to --enable-targets.
4981 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4983 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4984 opcodes to the first instruction with that opcode, to speed
4985 disassembly of large files. From ralphc@pyramid.com (Ralph
4988 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4990 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4992 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4994 * configure.bat: update to latest makefile.in
4996 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4998 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4999 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
5000 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
5001 slot insn is in a delay slot.
5002 * z8k-opc.h: (resflg): Fix patterns.
5003 * h8500-opc.h Fix CR insn patterns.
5005 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5007 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
5008 "cmpl" before POWER versions, so that gas -many uses them.
5010 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
5012 * disassemble.c: New file.
5013 * Makefile.in (OFILES): Add disassemble.o.
5014 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
5015 * configure.in: Define ARCHDEFS in Makefile. Code taken from
5016 binutils/configure.in.
5018 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
5019 opcode being examined.
5021 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5023 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
5024 (insert_ral, insert_ram, insert_ras): New functions.
5025 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
5026 RAS for store with update.
5028 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5030 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
5031 (edelsohn@npac.syr.edu).
5033 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5035 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
5038 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
5040 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
5042 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5044 * ppc-opc.c (powerpc_operands): The signedp field has been
5045 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
5046 instead. Add new operand SISIGNOPT.
5047 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
5048 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
5049 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
5052 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5054 * i386-dis.c (struct private): Renamed to dis_private. `private'
5055 is a reserved word for dynix cc.
5057 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5059 * configure.in: Change error message to refer to bfd/config.bfd
5060 rather than bfd/configure.in.
5062 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
5064 * ppc-opc.c: Define POWER2 as short alias flag.
5065 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
5068 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5070 * i960-dis.c (print_insn_i960): Don't read a second word for
5071 opcodes 0, 1, 2 and 3.
5073 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5075 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
5077 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5079 * m68881-ext.c: Removed; no longer used.
5080 * Makefile.in: Changed accordingly.
5082 * m68k-dis.c (ext_format_68881): Don't declare.
5083 (print_insn_m68k): If an instruction uses place 'i', it uses at
5084 least four fixed bytes.
5085 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
5086 extended float, convert to double using floatformat_to_double, not
5087 ieee_extended_to_double, and fetch the data before converting it.
5089 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5091 * mips-opc.c: It's sqrt.s, not sqrt.w. From
5092 davidj@ICSI.Berkeley.EDU (David Johnson).
5094 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5096 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
5097 PowerPC uses bdnz[l][a].
5099 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5101 * dis-buf.c, i386-dis.c: Include sysdep.h.
5103 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5105 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
5107 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
5108 by Motorola PowerPC 601 with PPC_OPCODE_601.
5109 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
5110 Disassemble Motorola PowerPC 601 instructions as well as normal
5111 PowerPC instructions.
5113 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
5115 * i960-dis.c (reg, mem): Just use a static array instead of
5118 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5120 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
5121 condition name index if this is for a negated condition.
5123 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
5124 Floating point format for 'H' operand is backwards from normal
5125 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
5126 operands (fmpyadd and fmpysub), handle bizarre register
5127 translation correctly for single precision format.
5129 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
5130 or 'I' operands if the next format specifier is 'M' (fcmp
5131 condition completer).
5133 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5135 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5136 single number giving a bitmask for the MB and ME fields of an M
5137 form instruction. Change NB to accept 32, and turn it into 0;
5138 also turn 0 into 32 when disassembling. Seperated SH from NB.
5139 (insert_mbe, extract_mbe): New functions.
5140 (insert_nb, extract_nb): New functions.
5141 (SC_MASK): Mask out SA and LK bits.
5142 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5143 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5144 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5145 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5146 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5147 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5148 (powerpc_macros): Define table of macro definitions.
5149 (powerpc_num_macros): Define.
5151 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5152 if PPC_OPERAND_NEXT is set.
5154 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5156 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5157 char. Retrieve contents using bfd_getl32 instead of shifting.
5159 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5161 * ppc-opc.c: New file. Opcode table for PowerPC, including
5162 opcodes for POWER (RS/6000).
5163 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5164 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5165 (CFILES): Add ppc-dis.c.
5166 (ppc-dis.o, ppc-opc.o): New targets.
5167 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5169 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5171 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5172 No space before 'u', 'f', or 'N'.
5174 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5176 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5177 farther than we should.
5179 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5181 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5183 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5185 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5187 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5188 needs it, to prevent reading past the end of a section.
5190 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5192 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5193 Removed t,A case for la; always use t,A(b) case.
5195 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5197 From Ted Lemen <mellon@pepper.ncd.com>
5198 * mips-dis.c (print_insn_arg): Handle 'k'.
5199 * mips-opc.c: Make cache use k, not t.
5201 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5203 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5204 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5205 FLOAT_FORMAT_CODE to put out floating point register names.
5207 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5209 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5211 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5213 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5215 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5217 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5218 larger than 32. Moved dsxx32 variants first for disassembler.
5220 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5222 * z8kgen.c, z8k-opc.h: Add full lda information.
5224 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5226 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5227 movb instructions. Any necessary space will be emitted by
5228 the code to handle nullification completers.
5230 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5232 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5234 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5236 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5237 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5239 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5241 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5243 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5245 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5246 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5248 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5250 * m88k-dis.c (m88kdis): comment change. Remove space after
5252 (printop): handle new arg types DEC and XREG for m88110.
5254 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5256 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5257 type for absolute branch addresses. Delete special
5258 "ble" and "be" code in 'W' operand code.
5260 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5262 * mips-opc.c: Set hazard information correctly for branch
5263 likely instructions.
5265 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5267 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5268 info->fprintf_func for printing and info->print_address_func for
5271 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5273 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5275 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5277 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5278 Corrected second case of "b" for disassembler.
5280 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5282 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5283 to BFD swapping routines to correspond to BFD name changes.
5285 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5287 * mips-opc.c: Change div machine instruction to be z,s,t rather
5288 than s,t. Change div macro to be d,v,t rather than d,s,t.
5289 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5290 rem and remu which generates only the corresponding div
5291 instruction. This is for compatibility with the MIPS assembler,
5292 which only generates the simple machine instruction when an
5293 explicit destination of $0 is used.
5294 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5296 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5298 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5299 WR_31 hazard for bal, bgezal, bltzal.
5301 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5303 * hppa-dis.c (print_insn_hppa): Use print function
5304 from within the disassemble_info, not fprintf_filtered.
5306 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5308 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5309 Law, law@cs.utah.edu.)
5311 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5313 * mips-opc.c ("absu"): Removed.
5316 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5318 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5319 Changed hazard information to distinguish between memory load
5320 delays and coprocessor load delays.
5322 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5324 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5326 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5328 * configure.in: Don't pass cpu to config.bfd.
5330 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5332 * m88k-dis.c (m88kdis): Make class unsigned.
5334 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5336 * alpha-dis.c (print_insn_alpha): One branch format case was
5337 missing the instruction name.
5339 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5341 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5342 Add the arch-specific auxiliary files.
5343 (OFILES): Remove the arch-specific auxiliary files
5344 and use BFD_MACHINES instead of DIS_LIBS.
5345 * configure.in: Set BFD_MACHINES based on --with-targets option.
5347 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5349 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5352 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5354 * sparc-opc.c: Change CONST to const to deal with gcc
5355 -Dconst=__const -traditional.
5357 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5359 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5360 coprocessor instructions out of #if 0, and made them use new
5363 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5365 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5367 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5369 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5370 instruction, for use by the disassembler.
5372 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5373 hand-coded sign extensions that depended on 32-bit host ints.
5374 FIXME, we still depend on big-endian host bitfield ordering.
5375 (sparc_print_insn): Set the insn_info_valid field, and the
5376 other fields that describe the instruction being printed.
5378 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5380 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5381 `jmp' instead of just one of them.
5383 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5385 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5386 (fput_fp_reg_r): Renamed from fput_reg_r.
5387 (fput_fp_reg): New function.
5388 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5390 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5392 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5394 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5396 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5398 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5399 don't output a space.
5401 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5403 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5405 * mips-opc.c: New file, containing opcode table from
5406 ../include/opcode/mips.h.
5407 * Makefile.in: Add it.
5409 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5411 * m88k-dis.c: New file, moved in from gdb and changed to use the
5412 new dis-asm.h disassembler interface.
5413 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5414 (m88k-dis.o): New target.
5416 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5418 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5419 argument string const char * to correspond to opcode/mips.h.
5421 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5423 * mips-dis.c: Updated to account for name changes in new version
5425 * Makefile.in: Added header file dependencies.
5427 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5429 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5431 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5433 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5434 extend, rather than shifts.
5436 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5438 * Makefile.in: Undo 15 June change.
5440 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5442 * m68k-dis.c (print_insn_arg): Change return value to byte count
5444 * m68k-dis.c: Re-write to detect invalid operands before
5445 printing anything, so we can handle this the same way we
5446 handle invalid opcodes.
5448 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5450 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5452 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5454 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5457 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5459 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5461 * configure.in: Do make sysdep.h link.
5462 * Makefile.in: Search ../include. Don't search ../bfd.
5464 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5466 Changes from Jeff Law, law@cs.utah.edu:
5467 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5468 Do not print a space before the completers specified by
5471 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5473 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5474 defined, since gdb has been fixed.
5476 Changes from Jeff Law, law@cs.utah.edu:
5477 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5478 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5479 be a *disassemble_info, not a *FILE.
5480 * hppa-dis.c: Support 'd', '!', and 'a'.
5481 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5482 * hppa-dis.c: Delete cases which are no longer needed.
5484 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5486 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5488 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5490 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5493 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5495 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5496 * configure.in: No longer need to configure to get sysdep.h.
5498 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5500 * Patches from Jeffrey Law <law@cs.utah.edu>.
5501 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5502 templates for 1.1 FP computational instructions.
5504 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5506 * h8500-dis.c (print_insn_h8500): Address argument is type
5508 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5511 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5512 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5514 * sparc-dis.c (compare_opcodes): Move static declaration to
5517 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5519 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5520 instruction, remove unimp hack from 'l' argument.
5522 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5524 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5527 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5529 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5530 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5533 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5535 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5536 arrays of string pointers to 2-d arrays of chars, to save
5539 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5541 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5542 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5544 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5546 * hppa-dis.c: New file from Utah, adapted to new disassembler
5548 * Makefile.in: Include it.
5550 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5552 * sh-dis.c, sh-opc.h: New files.
5554 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5556 * alpha-dis.c, alpha-opc.h: New files.
5558 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5560 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5563 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5565 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5567 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5569 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5572 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5574 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5575 and double percent signs a few places.
5577 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5579 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5580 Use info->print_address_func not print_address.
5582 * dis-buf.c (generic_print_address): New function.
5584 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5586 * Makefile.in: Add sparc-dis.c.
5587 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5589 Add `add' instruction to the set that get checked
5590 for a preceding `sethi' in order to print an absolute address.
5591 * (print_insn): Disassembly prefers real instructions.
5592 (is_delayed_branch): Speed up.
5593 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5594 Still missing some float ops, and needs testing.
5595 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5596 F_ALIAS. Use printf, not fprintf, when not passing a file
5598 (compare_opcodes): Check that identical instructions have
5599 identical opcodes, complain otherwise.
5602 * Include reg_names.
5604 Use dis-asm.h/read_memory_func interface.
5606 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5608 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5609 deliberately return non-zero to setjmp from longjmp. Otherwise
5610 this code fails to compile.
5612 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5614 * m68k-dis.c: Fix prototype for fetch_arg().
5616 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5618 * dis-buf.c: New file, for new read_memory_func interface.
5619 Makefile.in (OFILES): Include it.
5620 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5621 Use new read_memory_func interface.
5623 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5625 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5626 * h8500-opc.h: Fix couple of opcodes.
5628 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5630 * Makefile.in: add dvi & installcheck targets
5632 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5634 * Makefile.in: Update for h8500-dis.c.
5636 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5638 * h8500-dis.c, h8500-opc.h: New files
5640 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5642 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5643 ../include/dis-asm.h.
5644 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5645 and ../gdb/m68k-pinsn.c).
5646 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5647 and ../gdb/i386-pinsn.c).
5648 * m68881-ext.c: New file. Moved definition of
5649 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5650 * Makefile.in: Adjust for new files.
5651 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5652 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5653 can be dis-assembled.
5655 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5657 * mips-dis.c (print_insn_arg): Now returns void.
5659 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5661 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5662 files that use the macros.
5664 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5666 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5667 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5668 (CFILES): Added mips-dis.c.
5670 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5672 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5673 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5675 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5677 * Makefile.in: Improve *clean rules.
5678 * configure.in: Allow a default host.
5680 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5682 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5683 files include other sysdep files
5685 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5687 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5689 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5691 * configure.in: For host support, use ../bfd/configure.host
5692 so it stays in sync with the ../bfd/hosts database.
5694 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5696 * configure.in: use cpu-vendor-os triple instead of nested cases
5698 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5700 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5701 *always* the wrong one.
5703 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5705 * z8kgen.c: added copyright info
5707 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5709 * z8k-dis.c (unparse_instr): prettier tabs
5710 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5712 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5714 * configure.in: Add ncr* configuration.
5715 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5716 picayune ANSI compilers happy.
5718 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5720 * configure.in (i386): Make i386 and i486 synonymous for now.
5721 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5723 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5725 * Makefile.in (install): Fix typo.
5727 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5729 * Makefile.in (make): Remove obsolete crud.
5730 (sparc-opc.o): Avoid Sun Make VPATH bug.
5732 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5734 * Makefile.in: since there are no SUBDIRS, remove rule and
5735 references of subdir_do.
5737 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5739 * Makefile.in (install): Get the library name right here too.
5740 Don't install bfd.h, since it's unrelated to this library. No
5741 subdirs to recurse into, either.
5742 (CFILES): The source file has a .c suffix, not .o.
5744 * sparc-opc.c: New file, moved from BFD.
5745 * Makefile.in (OFILES): Build it.
5747 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5749 * z8k-dis.c: fixed forward refferences of some declarations.
5751 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5753 * Makefile.in: get the name of the library right
5755 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5757 * z8k-dis.c: knows how to disassemble z8k stuff
5758 * z8k-opc.h: new file full of z8000 opcodes
5762 version-control: never