1 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
3 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
5 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
7 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
8 of disassemble_info structure to determine if an overlay address
9 has a matching symbol in low memory.
11 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
12 new symbol_at_address_func field in disassemble_info structure.
14 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
16 * v850-opc.c (extract_d22): Use signed arithmatic.
18 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
20 * mips-opc.c: Three op mult is not an ISA insn.
22 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
24 * mips-opc.c: Fix formatting.
26 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
28 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
29 than assuming that char is signed. Explicitly sign extend 16 bit
30 values, rather than assuming that short is 16 bits.
31 (OP_sI, OP_J, OP_DIR): Likewise.
34 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
36 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
40 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
42 * v850-opc.c: Fix typo in comment.
44 * v850-dis.c (disassemble): Add test of processor type when
47 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
49 * configure.in: Use a diversion to set enable_shared before the
53 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
55 * m68k-opc.c (TBL1): Use ! rather than `.
56 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
58 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
60 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
62 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
64 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
67 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
68 * aclocal.m4: Rebuild with new libtool.
72 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
74 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
77 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
79 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
81 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
83 * v850-opc.c (v850_opcodes): Further rearrangements.
86 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
88 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
91 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
93 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
96 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
98 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
100 * mips16-opc.c: Added mips16 sdbbp.
103 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
105 * v850-opc.c: Initialise processors field of v850_opcode structure.
108 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
110 Merge changes from Martin Hunt:
112 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
114 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
115 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
116 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
118 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
120 * d30v-dis.c (print_insn): First operand of d*i (delayed
121 branch) instructions is relative.
123 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
124 (d30v_operand_table): Add IMM6S3 type.
125 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
127 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
128 and cmp instructions.
130 * d30v-opc.c: Correct entries for repeat*, and sat*.
131 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
132 types. Correct several formats.
134 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
136 * d30v-opc.c (pre_defined_registers): Change control registers.
138 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
139 SHORT_C2. Manual was incorrect.
141 * d30v-dis.c (lookup_opcode): Return value now indicates
142 if an opcode has a short and a long form. Used for deciding
143 to append a ".s" or ".l".
144 (print_insn): Append a ".s" to an instruction if it is
145 the short form and ".l" if it is a long form. Do not append
146 anything if the instruction has only one possible size.
148 * d30v-opc.c: Change mulx2h to require an even register.
149 New form: SHORT_A2; a SHORT_A form that needs an even
150 register as the first operand.
152 * d30v-dis.c (print_insn_d30v): Fix problem where the last
153 instruction was not being disassembled if there were an odd
154 number of instructions.
156 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
160 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
162 * v850-dis.c (disassemble): Improved display of register lists.
165 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
167 * sparc-opc.c (sparc_opcodes): Fix assembler args to
168 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
169 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
170 fandnot1s, fandnot2s.
172 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
174 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
176 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
178 * cgen-asm.c (cgen_parse_address): New argument resultp.
180 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
182 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
184 * mn10200-dis.c (disassemble): PC relative instructions are
185 relative to the next instruction, not the current instruction.
187 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
189 * v850-dis.c (disassemble): Only signed extend values that are not
190 returned by extract functions.
191 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
193 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
195 * v850-opc.c: Update comments. Remove use of
196 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
198 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
200 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
202 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
204 * configure: Rebuilt with latest devo autoconf for NT support.
206 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
208 * v850-dis.c (disassemble): Use curly brace syntax for register
211 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
212 where r0 is being used as a destination register.
215 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
217 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
221 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
223 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
224 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
225 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
226 Add insns to access SGR and DBR.
227 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
230 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
232 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
235 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
237 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
238 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
241 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
243 * configure (cgen_files): Add support for v850e target.
244 * configure.in (cgen_files): Add support for v850e target.
246 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
248 * configure (cgen_files): Add support for v850eq target.
249 * configure.in (cgen_files): Add support for v850eq target.
252 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
254 * configure.in (bfd_arc_arch): Add.
255 * configure: Rebuild.
256 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
257 * Makefile.in: Rebuild.
258 * arc-dis.c, arc-opc.c: New files.
259 * disassemble.c (ARCH_all): Define ARCH_arc.
260 (disassembler): Add ARC support.
262 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
265 * v850-dis.c (disassemble): Add support for v850EQ instructions.
267 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
268 (v850_opcodes): Add v850EQ instructions.
270 * v850-dis.c (disassemble): Add support for v850E instructions.
272 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
273 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
274 insert_spe, extract_spe): New Functions.
275 (v850_opcodes): Add v850E instructions.
278 * v850-opc.c: Reorganised and re-layed out to improve readability
281 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
283 * configure: Rebuild with autoconf 2.12.1.
285 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
287 * aclocal.m4, configure: Rebuild with new automake patches.
289 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
291 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
292 * acinclude.m4: Just include acinclude.m4 from BFD.
293 * aclocal.m4, configure: Rebuild.
295 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
297 * Makefile.am: New file, based on old Makefile.in.
298 * acconfig.h: New file.
299 * acinclude.m4: New file.
300 * stamp-h.in: New file.
301 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
302 Removed shared library handling; now handled by libtool. Replace
303 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
304 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
305 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
306 handling in AC_OUTPUT.
307 * dep-in.sed: Change .o to .lo.
308 * Makefile.in: Now built with automake.
309 * aclocal.m4: Now built with aclocal.
310 * config.in, configure: Rebuild.
312 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
314 * mips-opc.c: Fix typo/thinko in "eret" instruction.
317 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
319 * mips-opc.c: Fix coding of mtsa.
322 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
324 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
326 * sparc-dis.c (sorted_opcodes): New static local.
327 (struct opcode_hash): `opcode' is pointer to const element.
328 (build_hash): First arg is now table of sorted pointers.
329 (print_insn_sparc): Sort opcodes by sorting table of pointers.
330 (compare_opcodes): Update.
332 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
334 * cgen-opc.c: #include <ctype.h>.
335 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
336 Handle case insensitive hashing.
337 (hash_keyword_value): Change type of `value' to unsigned int.
339 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
341 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
342 precision FP, mark it as such. Likewise for double precision
343 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
346 (mips_builtin_opcodes): Remove non-existant r5900 instructions
350 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
352 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
353 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
356 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
358 * ppc-opc.c (extract_nsi): make unsigned expression signed before
360 (UNUSED): remove one level of parens, so MSVC doesn't choke on
361 nesting depth when all the macros are expanded.
363 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
365 * sparc-opc.c: The fcmp v9a instructions take an integer register
366 as a destination, not a floating point register. From Christian
367 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
369 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
371 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
372 syntax. From Roman Hodek
373 <rnhodek@faui22c.informatik.uni-erlangen.de>.
375 * i386-dis.c (twobyte_has_modrm): Fix pand.
377 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
379 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
381 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
383 * arm-dis.c: Add prototypes for arm_decode_shift and
386 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
388 * mips-opc.c: Add r3900 insns.
390 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
392 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
393 print delay slot instructions on the same line. When using a PC
394 relative load, add a comment with the value being loaded if it can
397 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
399 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
400 to pushS/popS for segment regs and byte constant so that
401 pushw/popw printed when in 16 bit data mode.
403 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
404 print cbtw, cwtd in 16 bit data mode.
405 * i386-dis.c (putop): extra case W to support above.
407 * i386-dis.c (print_insn_x86): print addr32 prefix when given
408 address size prefix in 16 bit address mode.
410 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
412 * sh-dis.c: Reindent. Rename local variable fprintf to
415 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
417 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
419 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
421 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
423 * mips16-opc.c (mip16_opcodes): same.
425 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
427 * m68k-opc.c (moveb): Change $d to %d.
429 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
431 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
432 (twobyte_has_modrm): Likewise.
434 (OP_MMX, OP_EM, OP_MS): New static functions.
436 * i386-dis.c: Revert patch of April 4. The output now matches
439 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
441 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
444 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
446 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
448 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
450 * Makefile.in (install): Depend upon installdirs.
451 (installdirs): New target.
453 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
455 From Thomas Graichen <graichen@rzpd.de>:
456 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
457 * configure: Rebuild.
459 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
461 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
462 Delete string{,s}.h support.
464 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
466 * cgen-asm.c (cgen_parse_operand_fn): New global.
467 (cgen_parse_{{,un}signed_integer,address}): Update call to
468 cgen_parse_operand_fn.
469 (cgen_init_parse_operand): New function.
470 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
471 from cgen_asm_init_parse.
472 (m32r_cgen_assemble_insn): New operand `errmsg'.
473 Delete call to as_bad, return error message to caller.
474 (m32r_cgen_asm_hash_keywords): #if 0 out.
476 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
478 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
480 [case 'J']: Fix typo in register name.
482 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
484 * configure.in: Substitute SHLIB_LIBS.
485 * configure: Rebuild.
486 * Makefile.in (SHLIB_LIBS): New variable.
487 ($(SHLIB)): Use $(SHLIB_LIBS).
489 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
491 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
493 * cgen-opc.c (hash_keyword_name): Improve algorithm.
495 * disassemble.c (disassembler): Handle m32r.
497 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
499 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
500 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
501 * Makefile.in (CFILES): Add them.
502 (ALL_MACHINES): Add them.
503 (dependencies): Regenerate.
504 * configure.in (cgen_files): New variable.
505 (bfd_m32r_arch): Add entry.
506 * configure: Regenerate.
508 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
510 * configure.in: Correct file names for bfd_mn10[23]00_arch.
511 * configure: Rebuild.
513 * Makefile.in: Rebuild dependencies.
515 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
517 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
520 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
522 * Branched binutils 2.8.
524 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
526 * m10200-dis.c: Rename from mn10200-dis.c.
527 * m10200-opc.c: Rename from mn10200-opc.c.
528 * m10300-dis.c: Rename from mn10300-dis.c
529 * m10300-opc.c: Rename from mn10300-opc.c.
530 * Makefile.in: Update accordingly.
532 * mips16-opc.c: Add mul and dmul macros.
534 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
536 * makefile.vms: Update CFLAGS, add clean target.
538 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
540 * mips-opc.c: Add "wait". From Ralf Baechle
541 <ralf@gnu.ai.mit.edu>.
543 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
544 * configure, config.in: Rebuild.
545 * sysdep.h: Include <stdlib.h> if it exists.
546 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
548 * Makefile.in: Rebuild dependencies.
550 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
552 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
553 Andrew Bray <andy@madhouse.demon.co.uk>.
555 * mips-opc.c: Add cast when setting mips_opcodes.
557 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
559 * v850-dis.c (disassemble): Fix sign extension problem.
560 * v850-opc.c (extract_d*): Fix sign extension problems to make
561 disassembly calculate branch offsets correctly.
563 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
565 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
567 * mips-opc.c: Add dctr and dctw.
570 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
572 * d30v-dis.c (print_insn): Change the way signed constants
575 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
577 * Makefile.in (BFD_H): New variable.
578 (HFILES): New variable.
579 (CFILES): Add all C files.
580 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
581 Delete old dependencies, and build new ones.
582 * dep-in.sed: New file.
584 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
586 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
588 start-sanitize-coldfire
589 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
591 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
594 end-sanitize-coldfire
595 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
597 * mn10200-opc.c: Change "trap" to "syscall".
598 * mn10300-opc.c: Add new "syscall" instruction.
600 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
602 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
603 mulul insns on the coldfire.
605 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
607 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
608 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
609 (print_insn_little_arm): Likewise.
611 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
613 Based on patches from H.J. Lu <hjl@lucon.org>:
614 * i386-dis.c (fetch_data): Add prototype.
615 * m68k-dis.c (fetch_data): Add prototype.
616 (dummy_print_address): Add prototype. Make static.
617 * ppc-opc.c (valid_bo): Add prototype.
618 * sparc-dis.c (build_hash_table): Add prototype.
619 (is_delayed_branch, compute_arch_mask): Add prototypes.
620 (print_insn_sparc): Make several local variables const.
621 (compare_opcodes): Change arguments to const PTR. Add prototype.
622 * sparc-opc.c (arg): Change name field to be const.
623 (lookup_name, lookup_value): Add prototypes. Change table and
624 name parameters to be const.
625 (sparc_encode_asi): Change name parameter to be const.
626 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
627 (sparc_encode_sparclet_cpreg): Likewise.
628 (sparc_decode_asi): Change return type to be const.
629 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
630 (sparc_decode_sparclet_cpreg): Likewise.
632 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
634 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
635 Solaris doesn't like the combined options, and the -f is
637 (stamp-tshlink, install): Likewise.
639 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
641 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
644 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
646 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
648 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
650 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
653 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
655 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
658 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
660 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
662 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
664 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
667 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
669 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
670 floatformat_to_double to make portable.
671 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
674 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
676 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
677 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
679 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
681 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
682 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
685 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
687 * tic80-opc.c (LSI_SCALED): Renamed from this ...
688 (OFF_SL_BR_SCALED): ... to this, and added the flag
689 TIC80_OPERAND_BASEREL to the flags word.
690 (tic80_opcodes): Replace all occurances of LSI_SCALED with
694 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
696 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
697 Change mips_opcodes from const array to a pointer,
698 and change bfd_mips_num_opcodes from const int to int,
699 so that we can increase the size of the mips opcodes table
703 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
705 * tic80-opc.c (tic80_predefined_symbols): Revert change to
706 store BITNUM values in the table in one's complement form
707 to match behavior when assembler is given a raw numeric
708 value for a BITNUM operand.
709 * tic80-dis.c (print_operand_bitnum): Ditto.
713 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
715 * d30v-opc.c: Removed references to FLAG_X.
718 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
720 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
723 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
725 * Makefile.in: Added d30v object files.
726 * configure: (bfd_d30v_arch) Rebuilt.
727 * configure.in: (bfd_d30v_arch) Added new case.
728 * d30v-dis.c: New file.
729 * d30v-opc.c: New file.
730 * disassemble.c (disassembler) Add entry for d30v.
734 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
736 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
737 representations for the floating point BITNUM values.
739 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
741 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
742 in the table in one's complement form, as they appear in the
744 (tic80_symbol_to_value): Use macros to access predefined
746 (tic80_value_to_symbol): Ditto.
747 (tic80_next_predefined_symbol): New function.
748 * tic80-dis.c (print_operand_bitnum): Remove code that did
749 one's complement for BITNUM values.
753 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
755 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
758 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
760 * makefile.vms: Remove 8 bit characters. Update to latest
763 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
765 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
767 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
769 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
770 (IMM24_PCREL): Likewise.
772 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
774 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
775 address for an extended PC relative instruction that is not a
778 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
780 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
784 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
786 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
787 (tic80_opcodes): Sort entries so that long immediate forms
788 come after short immediate forms, making it easier for
789 assembler to select the right one for a given operand.
792 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
794 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
796 (print_insn_mips16): Likewise.
799 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
801 * mips-opc.c: add r5900.
805 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
807 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
808 a symbol class that restricts translation to just that
809 class (general register, condition code, etc).
811 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
813 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
814 and REG_DEST_E for register operands that have to be
815 an even numbered register. Add REG_FPA for operands that
816 are one of the floating point accumulator registers.
817 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
818 (tic80_opcodes): Change entries that need even numbered
819 register operands to use the new operand table entries.
820 Add "or" entries that are identical to "or.tt" entries.
823 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
825 * mips16-opc.c: Add new cases of exit instruction for
827 * mips-dis.c (print_mips16_insn_arg): Display floating point
828 registers in operands of exit instruction. Print `$' before
829 register names in operands of entry and exit instructions.
832 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
834 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
835 pairs for all predefined symbols recognized by the assembler.
836 Also used by the disassembling routines.
837 (tic80_symbol_to_value): New function.
838 (tic80_value_to_symbol): New function.
839 * tic80-dis.c (print_operand_control_register,
840 print_operand_condition_code, print_operand_bitnum):
841 Remove private tables and use tic80_value_to_symbol function.
844 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
846 * d10v-dis.c (print_operand): Change address printing
847 to correctly handle PC wrapping. Fixes PR11490.
849 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
851 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
854 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
856 * mips-dis.c (print_insn_mips16): Set insn_info information.
857 (print_mips16_insn_arg): Likewise.
859 * mips-dis.c (print_insn_mips16): Better handling of an extend
860 opcode followed by an instruction which can not be extended.
862 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
864 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
865 coldfire moveb instruction to not allow an address register as
866 destination. Although the documentation does not indicate that
867 this is invalid, experiments uncovered unexpected behavior.
868 Added a comment explaining the situation. Thanks to Andreas
869 Schwab for pointing this out to me.
872 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
874 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
875 entries are presorted so that entries with the same mnemonic are
876 adjacent to each other in the table. Sort the entries for each
877 instruction so that this is true.
880 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
882 * m68k-dis.c: Include <libiberty.h>.
883 (print_insn_m68k): Sort the opcode table on the most significant
884 nibble of the opcode.
887 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
889 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
890 "vsub", "vst", "xnor", and "xor" instructions.
891 (V_a1): Renamed from V_a, msb of accumulator reg number.
892 (V_a0): Add macro, lsb of accumulator reg number.
894 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
896 * tic80-dis.c (print_insn_tic80): Broke excessively long
897 function up into several smaller ones and arranged for
898 the instruction printing function to be callable recursively
899 to print vector instructions that have both a load and a
900 math instruction packed into a single opcode.
901 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
902 to explain why it comes after the other vector opcodes.
905 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
907 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
908 move insns to handle immediate operands.
910 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
912 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
913 fix operand mask in the "moveml" entries for the coldfire.
916 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
918 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
919 New macros for building vector instruction opcodes.
920 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
921 FMT_LI, which were unused. The field is now a flags field.
922 Remove some opcodes that are possible, but illegal, such
923 as long immediate instructions with doubles for immediate
924 values. Add "vadd" and "vld" instructions.
926 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
928 * tic80-opc.c (tic80_operands): Reorder some table entries to make
929 the order more logical. Move the shift alias instructions ("rotl",
930 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
931 interspersed with the regular sr.x and sl.x instructions. Add
932 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
933 "sub", "subu", "swcr", and "trap".
935 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
937 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
938 (OFF_SL_PC): Renamed from OFF_SL.
939 (OFF_SS_BR): New operand type for base relative operand.
940 (OFF_SL_BR): New operand type for base relative operand.
941 (REG_BASE): New operand type for base register operand.
942 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
943 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
944 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
946 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
947 10 char field, padded with spaces on rhs, rather than a string
948 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
949 than old TIC80_OPERAND_RELATIVE. Add support for new
950 TIC80_OPERAND_BASEREL flag bit.
952 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
954 * tic80-dis.c (print_insn_tic80): Print floating point operands
956 * tic80-opc.c (SPFI): Add single precision floating point
957 immediate operand type.
958 (ROTATE): Add rotate operand type for shifts.
959 (ENDMASK): Add for shifts.
960 (n): Macro for the 'n' bit.
961 (i): Macro for the 'i' bit.
962 (PD): Macro for the 'PD' field.
963 (P2): Macro for the 'P2' field.
964 (P1): Macro for the 'P1' field.
965 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
969 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
971 * mn10200-dis.c (disassemble): Mask off unwanted bits after
972 adding in current address for pc-relative operands.
975 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
977 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
978 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
979 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
980 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
981 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
982 REG_BASE_M_SI, REG_BASE_M_LI respectively.
983 (REG_SCALED, LSI_SCALED): New operand types.
984 (E): New macro for 'E' bit at bit 27.
985 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
986 opcodes, including the various size flavors (b,h,w,d) for
987 the direct load and store instructions.
989 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
991 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
993 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
994 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
995 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
996 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
997 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
998 masks with "MASK_* & ~M_*" to get the M bit reset.
999 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
1001 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
1003 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
1004 correctly. Add support for printing TIC80_OPERAND_BITNUM and
1005 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
1007 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
1008 CC, SICR, and LICR table entries.
1009 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
1010 "bcnd", and "brcr" opcodes.
1013 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
1015 * ppc-opc.c (powerpc_operands): Make comment match the
1016 actual fields (no shift field).
1017 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
1018 start-sanitize-tic80
1019 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
1020 partial implementation, work in progress.
1021 * tic80-opc.c (tic80_operands): Begin construction operands table.
1022 (tic80_opcodes): Continue populating opcodes table and start
1023 filling in the operand indices.
1024 (tic80_num_opcodes): Add this.
1027 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
1029 * m68k-opc.c: Add #B case for moveq.
1031 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
1033 * mn10300-dis.c (disassemble): Make sure all variables are initialized
1034 before they are used.
1036 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
1038 * v850-opc.c (v850_opcodes): Put curly-braces around operands
1039 for "breakpoint" instruction.
1041 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
1043 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
1044 (dep): Use ALL_CFLAGS rather than CFLAGS.
1046 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1048 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
1051 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
1053 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
1054 start-sanitize-tic80
1055 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
1058 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
1060 * mips16-opc.c: Add "abs".
1062 start-sanitize-tic80
1063 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
1065 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
1066 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
1067 (disassembler): Add bfd_arch_tic80 support to set disassemble
1068 to print_insn_tic80.
1069 * tic80-dis.c (print_insn_tic80): Add stub.
1071 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
1073 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
1074 * configure: Regenerate with autoconf.
1075 * tic80-dis.c: Add file.
1076 * tic80-opc.c: Add file.
1079 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1081 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
1083 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
1085 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
1086 (mn10200_opcodes): Use it for some logicals and btst insns.
1087 Add "break" and "trap" instructions.
1089 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
1091 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
1093 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
1095 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
1096 relative load or add now depends upon whether the instruction is
1099 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
1101 * mn10200-dis.c: Finish writing disassembler.
1102 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
1103 Fix mask for "jmp (an)".
1105 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
1106 handle endianness issues for mn10300.
1108 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
1110 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
1112 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
1113 instruction. Fix opcode field for "movb (imm24),dn".
1115 * mn10200-opc.c (mn10200_operands): Fix insertion position
1118 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
1120 * mn10200-opc.c: Create mn10200 opcode table.
1121 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
1122 but moving along nicely.
1124 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
1126 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
1128 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
1130 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
1131 specifiers for fmovem* instructions.
1133 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1135 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
1137 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
1139 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
1142 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
1144 * mn10300-opc.c: Add some comments explaining the various
1147 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
1149 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1151 * m68k-dis.c (print_insn_arg): Handle new < and > operand
1154 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1155 operand specifiers in fmovm* instructions.
1157 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
1159 * ppc-opc.c (insert_li): Give an error if the offset has the two
1160 least significant bits set.
1162 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
1164 * mips-dis.c (print_insn_mips16): Separate the instruction from
1165 the arguments with a tab, not a space.
1167 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
1169 * mn10300-dis.c (disasemble): Finish conversion to '$' as
1172 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
1175 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
1177 * configure: Rebuild with autoconf 2.12.
1179 Add support for mips16 (16 bit MIPS implementation):
1180 * mips16-opc.c: New file.
1181 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
1182 (mips16_reg_names): New static array.
1183 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
1184 after seeing a 16 bit symbol.
1185 (print_insn_little_mips): Likewise.
1186 (print_insn_mips16): New static function.
1187 (print_mips16_insn_arg): New static function.
1188 * mips-opc.c: Add jalx instruction.
1189 * Makefile.in (mips16-opc.o): New target.
1190 * configure.in: Use mips16-opc.o for bfd_mips_arch.
1191 * configure: Rebuild.
1193 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
1195 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
1196 operand specifiers in *save, *restore and movem* instructions.
1198 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
1201 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
1202 register operands for immediate arithmetic, not, neg, negx, and
1203 set according to condition instructions.
1205 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
1206 specifier of the effective-address operand in immediate forms of
1207 arithmetic instructions. The specifier for the immediate operand
1208 notes how and where the constant will be stored.
1210 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
1212 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1215 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1218 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1220 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1222 * mn10300-dis.c (disassemble): Handle register lists.
1224 * mn10300-opc.c: Fix handling of register list operand for
1225 "call", "ret", and "rets" instructions.
1227 * mn10300-dis.c (disassemble): Print PC-relative and memory
1228 addresses symbolically if possible.
1229 * mn10300-opc.c: Distinguish between absolute memory addresses,
1230 pc-relative offsets & random immediates.
1232 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1234 (disassemble): Handle SPLIT and EXTENDED operands.
1236 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1238 * mn10300-dis.c: Rough cut at printing some operands.
1240 * mn10300-dis.c: Start working on disassembler support.
1241 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1243 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1245 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1247 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1249 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1251 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1253 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1254 register argument is calls and jmp instructions.
1256 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1258 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1259 getx operand. Fix opcode for mulqu imm,dn.
1261 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1263 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1264 in MN10300_OPERAND_SPLIT operands for how many bits
1265 appear in the basic insn word. Add IMM32_HIGH24,
1266 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1267 (mn10300_opcodes): Use new operands as needed.
1269 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1270 for bset, bclr, btst instructions.
1271 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1273 * mn10300-opc.c (mn10300_operands): Remove many redundant
1274 operands. Update opcode table as appropriate.
1275 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1276 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1278 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1280 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1281 operands (for indexed load/stores). Fix bitpos for DI
1282 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1283 few instructions that insert immediates/displacements in the
1284 middle of the instruction. Add IMM8E for 8 bit immediate in
1285 the extended part of an instruction.
1286 (mn10300_operands): Use new opcodes as appropriate.
1288 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1290 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1291 sequential so the assembler never parallelizes it with
1294 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1296 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1297 a data/address register that appears in register field 0
1298 and register field 1.
1299 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1301 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1303 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1304 standard disassembly.
1306 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1307 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1308 Recategorize PALcode instructions.
1310 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1312 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1314 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1316 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1317 there are no operand types.
1319 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1321 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1323 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1325 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1327 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1329 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1331 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1332 and sst.w instructions.
1334 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1337 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1339 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1342 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1344 * ppc-opc.c (PPCPWR2): Define.
1345 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1348 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1350 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1351 field for movhu instruction.
1353 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1354 cast value to "long" not "signed long" to keep hpux10
1357 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1359 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1362 * mn10300-opc.c (FMT*): Remove definitions.
1364 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1365 for shift-by-register opcodes.
1367 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1368 into [AD][MN][01] for encoding the position of the register
1371 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1373 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1374 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1376 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1378 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1379 Fix various typos. Add "PAREN" operand.
1380 (MEM, MEM2): Define.
1381 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1382 operands. Fix several typos.
1384 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1387 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1389 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1390 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1392 (mn10300_opcodes): Break opcode format out into its own field.
1393 Update many operand fields to deal with signed vs unsigned
1394 issues. Fix one or two typos in the "mov" instruction
1395 opcode, mask and/or operand fields.
1397 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1399 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1400 m68851 wasn't reset.
1402 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1404 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1405 all opcodes. Very rough cut at operands for all opcodes.
1407 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1410 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1412 * mn10200-opc.c, mn10300-opc.c: New files.
1413 * mn10200-dis.c, mn10300-dis.c: New files.
1414 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1415 * disassemble.c: Break mn10x00 support into 10200 and 10300
1417 * configure.in: Likewise.
1418 * configure: Rebuilt.
1420 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1422 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1424 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1426 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1428 * disassemble (ARCH_mn10x00): Define.
1429 (disassembler): Handle bfd_arch_mn10x00.
1430 * configure.in: Recognize bfd_mn10x00_arch.
1431 * configure: Rebuilt.
1433 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1435 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1436 accordingly. Don't declare functions using op_rtn.
1438 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1440 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1441 params to be more standard.
1442 * (disassemble): Print absolute addresses and symbolic names for
1443 branch and jump targets.
1444 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1446 * (v850_opcodes): Add breakpoint insn.
1448 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1450 * m68k-opc.c: Move the fmovemx data register cases before the
1451 other cases, so that they get recognized before the data register
1452 does gets treated as a degenerate register list.
1454 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1456 * mips-opc.c: Add a case for "div" and "divu" with two registers
1457 and a destination of $0.
1459 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1461 * mips-dis.c (print_insn_arg): Add prototype.
1462 (_print_insn_mips): Ditto.
1464 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1466 * mips-dis.c (print_insn_arg): Print condition code registers as
1469 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1471 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1473 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1475 * v850-dis.c (disassemble): Make static. Provide prototype.
1477 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1479 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1482 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1484 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1485 ']' characters into the output stream.
1486 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1487 Add "memop" field to all opcodes (for the disassembler).
1488 Reorder opcodes so that "nop" comes before "mov" and "jr"
1489 comes before "jarl".
1491 * v850-dis.c (print_insn_v850): Fix typo in last change.
1493 * v850-dis.c (print_insn_v850): Properly handle disassembling
1494 a two byte insn at the end of a memory region when the memory
1495 region's size is only two byte aligned.
1497 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1499 * v850-dis.c (v850_reg_names): Define.
1500 (v850_sreg_names, v850_cc_names): Likewise.
1501 (disassemble): Very rough cut at printing operands (unformatted).
1503 * v850-opc.c (BOP_MASK): Fix.
1504 (v850_opcodes): Fix mask for jarl and jr.
1506 * v850-dis.c: New file. Skeleton for disassembler support.
1507 * Makefile.in Remove v850 references, they're not needed here.
1508 * configure.in: Add v850-dis.o when building v850 toolchains.
1509 * configure: Rebuilt.
1510 * disassemble.c (disassembler): Call v850 disassembler.
1512 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1513 (insert_d8_6, extract_d8_6): New functions.
1514 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1515 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1517 (IF4A, IF4B): Use "D7" instead of "D7S".
1518 (IF4C, IF4D): Use "D8_7" instead of "D8".
1519 (IF4E, IF4F): New. Use "D8_6".
1520 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1521 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1523 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1524 (v850_operands): Change D16 to D16_15, use special insert/extract
1525 routines. New new D16 that uses the generic insert/extract code.
1526 (IF7A, IF7B): Use D16_15.
1527 (IF7C, IF7D): New. Use D16.
1528 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1530 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1531 message. Issue an error if the branch offset is odd.
1533 * v850-opc.c: Add notes about needing special insert/extract
1534 for all the load/store insns, except "ld.b" and "st.b".
1536 * v850-opc.c (insert_d22, extract_d22): New functions.
1537 (v850_operands): Use insert_d22 and extract_d22 for
1539 (insert_d9): Fix range check.
1541 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1543 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1544 and set bits field to D9 and D22 operands.
1546 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1548 * v850-opc.c (v850_operands): Define SR2 operand.
1549 (v850_opcodes): "ldsr" uses R1,SR2.
1551 * v850-opc.c (v850_opcodes): Fix opcode specs for
1552 sld.w, sst.b, sst.h, sst.w, and nop.
1554 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1556 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1557 end of the opcode table.
1559 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1561 * d10v-opc.c (pre_defined_registers): Added register pairs,
1562 "r0-r1", "r2-r3", etc.
1564 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1566 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1567 Create I16U for an unsigned 16bit mmediate operand.
1568 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1570 * v850-opc.c (v850_operands): Define EP operand.
1571 (IF4A, IF4B, IF4C, IF4D): Use EP.
1573 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1574 with immediate operand, "movhi". Tweak "ldsr".
1576 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1577 correct. Get sld.[bhw] and sst.[bhw] closer.
1579 * v850-opc.c (v850_operands): "not" is a two byte insn
1581 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1583 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1585 * v850-opc.c (two): Get order of words correct.
1587 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1589 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1590 register source and destination operands.
1591 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1593 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1594 same thinko in "trap" opcode.
1596 * v850-opc.c (v850_opcodes): Add initializer for size field
1599 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1600 Add D8 for 8-bit unsigned field in short load/store insns.
1601 (IF4A, IF4D): These both need two registers.
1602 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1603 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1604 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1605 for "ldsr" and "stsr".
1606 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1609 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1610 short store word (sst.w).
1612 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1614 * v850-opc.c (v850_operands): Added insert and extract fields,
1615 pointers to functions that handle unusual operand encodings.
1617 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1619 * v850-opc.c (v850_opcodes): Enable "trap".
1621 * v850-opc.c (v850_opcodes): Fix order of displacement
1622 and register for "set1", "clr1", "not1", and "tst1".
1624 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1626 * v850-opc.c (v850_operands): Add "B3" support.
1627 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1630 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1632 * v850-opc.c: Close unterminated comment.
1634 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1636 * v850-opc.c (v850_operands): Add flags field.
1637 (v850_opcodes): add move opcodes.
1639 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1641 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1642 * configure: (bfd_v850v_arch) Add new case.
1643 * configure.in: (bfd_v850_arch) Add new case.
1644 * v850-opc.c: New file.
1646 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1648 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1650 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1652 * d10v-opc.c: Add additional information to the opcode
1653 table to help determinine which instructions can be done
1656 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1658 * mpw-make.sed: Update editing of include pathnames to be
1661 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1663 * arm-opc.h: Added "bx" instruction definition.
1665 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1667 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1669 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1671 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1673 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1675 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1677 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1679 * makefile.vms: Update for alpha-opc changes.
1681 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1683 * i386-dis.c (print_insn_i386): Actually return the correct value.
1684 (ONE, OP_ONE): #ifdef out; not used.
1686 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1688 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1689 Changed subi operand type to treat 0 as 16.
1691 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1693 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1696 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1698 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1699 memory transfer instructions. Add new format string entries %h and %s.
1700 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1703 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1705 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1706 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1708 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1710 * alpha-dis.c (print_insn_alpha_osf): Remove.
1711 (print_insn_alpha_vms): Remove.
1712 (print_insn_alpha): Make globally visible. Chose the register
1713 names based on info->flavour.
1714 * disassemble.c: Always return print_insn_alpha for the alpha.
1716 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1718 * d10v-dis.c (dis_long): Handle unknown opcodes.
1720 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1722 * d10v-opc.c: Changes to support signed and unsigned numbers.
1723 All instructions with the same name that have long and short forms
1724 now end in ".l" or ".s". Divs added.
1725 * d10v-dis.c: Changes to support signed and unsigned numbers.
1727 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1729 * d10v-dis.c: Change all functions to use info->print_address_func.
1731 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1733 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1734 move ccr/sr insns more strict so that the disassembler only
1735 selects them when the addressing mode is data register.
1737 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1738 * d10v-opc.c (pre_defined_registers): Declare.
1739 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1740 to pick a better name for the registers.
1742 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1744 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1745 operands for fexpand and fpmerge. From Christian Kuehnke
1746 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1748 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1750 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1751 print routine. Take new regnames and cpumask arguments.
1752 Kill the environment variable nonsense.
1753 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1754 (print_insn_alpha_vms): New function. Do VMS style regnames.
1755 * disassemble.c (disassembler): Test bfd flavour to pick
1756 between OSF and VMS routines. Default to OSF.
1758 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1760 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1761 * configure: Rebuild.
1762 * Makefile.in (install): Use @INSTALL_SHLIB@.
1764 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1766 * configure: (bfd_d10v_arch) Add new case.
1767 * configure.in: (bfd_d10v_arch) Add new case.
1768 * d10v-dis.c: New file.
1769 * d10v-opc.c: New file.
1770 * disassemble.c (disassembler) Add entry for d10v.
1772 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1774 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1775 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1777 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1779 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1780 distinguish between variants of the instruction set.
1781 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1782 distinguish between variants of the instruction set.
1784 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1786 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1787 the 8086 instruction set.
1788 * i386-dis.c: General cleanups. Make most things static. Add
1789 prototypes. Get rid of static variables aflags and dflags. Pass
1790 them as args (to almost everything).
1792 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1794 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1796 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1798 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1799 if the next arg is marked with SRC_IN_DST. Gross.
1801 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1802 we're looking for and find EXR.
1804 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1805 if we're looking for KBIT and we don't find it.
1807 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1810 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1811 3bit immediate operands.
1813 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1815 * Released binutils 2.7.
1817 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1818 <kkaempf@progis.ac-net.de>.
1820 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1822 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1824 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1826 * sparc-dis.c (print_insn_sparclite): New routine to print
1827 sparclite instructions.
1829 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1831 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1833 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1835 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1836 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1837 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1839 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1841 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1842 Use autoconf-set values.
1843 (docdir, oldincludedir): Removed.
1844 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1846 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1848 * alpha-opc.c: New file.
1849 * alpha-opc.h: Remove.
1850 * alpha-dis.c: Complete rewrite to use new opcode table.
1851 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1852 * configure: Rebuild with autoconf 2.10.
1853 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1854 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1856 (alpha-opc.o): New target.
1858 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1860 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1861 Set imm_added_to_rs1 even if the source and destination register
1864 * sparc-opc.c: Add some two operand forms of the wr instruction.
1866 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1868 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1871 * disassemble.c (disassembler): Handle H8/S.
1872 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1874 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1876 * sparc-opc.c: Add beq/teq as aliases for be/te.
1878 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1879 <sergei@msil.sps.mot.com>.
1881 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1883 * makefile.vms: New file.
1885 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1887 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1889 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1892 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1894 * i386-dis.c (OP_OFF): Call append_prefix.
1896 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1898 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1899 unsigned long to silence a warning from the Solaris PowerPC
1902 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1904 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1906 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1908 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1910 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1911 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1912 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1913 cpush, cpusha, cpull sparclet insns.
1915 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1917 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1919 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1921 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1922 Set F_FLOAT on other floating point instructions.
1924 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1926 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1928 (powerpc_opcodes): Add 860/821 specific SPRs.
1930 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1932 * configure.in: Permit --enable-shared to specify a list of
1933 directories. Set and substitute BFD_PICLIST.
1934 * configure: Rebuild.
1935 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1936 uses. Set to @BFD_PICLIST@.
1938 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1940 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1941 not "abs", which may be needed for the absolute in something
1942 like btst #0,@10:8. Print L_3 immediates separately from other
1943 immediates. Change ABSMOV reference to ABS8MEM.
1945 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1947 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1948 (current_arch_mask): New static global.
1949 (compute_arch_mask): New static function.
1950 (print_insn_sparc): Delete sparc_v9_p. New static local
1951 current_mach. Resort opcode table if current_mach changes.
1952 Generalize "insn not supported" test.
1953 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1954 Delete test for v9/!v9.
1955 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1957 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1958 (brfcx): Renamed to FBRX.
1959 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1960 coprocessor mnemonics are not supported on the sparclet).
1961 (condf): Renamed to CONDF.
1962 (SLCBCC2): Delete F_ALIAS flag.
1964 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1966 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1967 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1969 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1971 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1972 that the shared library version number is set correctly.
1974 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1976 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1977 Miles Bader <miles@gnu.ai.mit.edu>.
1978 * configure: Rebuild.
1980 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1982 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1985 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1987 * configure: Rebuild with autoconf 2.8.
1989 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1991 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1992 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1994 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1996 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1997 since they appear as targets in Makefile.in.
1998 * configure: Rebuild.
2000 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
2002 * mpw-make.sed: Edit out shared library support bits.
2004 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
2006 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
2007 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
2008 (sparc_opcodes): Add sparclet insns.
2009 (sparclet_cpreg_table): New static local.
2010 (sparc_{encode,decode}_sparclet_cpreg): New functions.
2011 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
2013 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
2015 * i386-dis.c (index16): New static variable.
2016 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
2018 (OP_indirE): Return result of OP_E.
2019 (OP_E): Check for 16 bit addressing mode, and disassemble
2020 correctly. Optimised 32 bit case a little. Don't print
2021 "(base,index,scale)" when sib specifies only an offset.
2023 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
2025 * configure.in: Set and substitute SHLIB_DEP.
2026 * configure: Rebuild.
2027 * Makefile.in (SHLIB_DEP): New variable.
2028 (LIBIBERTY_LISTS, BFD_LIST): New variables.
2029 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
2030 COMMON_SHLIB, add them to piclist with appropriate modifications.
2031 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
2032 here: just use piclist.
2034 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
2036 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
2037 (print_insn_sparc): Rewrite v9/not-v9 tests.
2038 (compare_opcodes): Likewise.
2039 * sparc-opc.c (MASK_<ARCH>): Define.
2040 (v6,v7,v8,sparclite,v9,v9a): Redefine.
2041 (sparclet,v6notv9): Define.
2042 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
2043 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
2045 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
2047 * configure.in: Call AC_PROG_CC before configure.host.
2048 * configure: Rebuild.
2050 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
2052 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
2054 * i386-dis.c (onebyte_has_modrm): New static array.
2055 (twobyte_has_modrm): New static array.
2056 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
2058 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
2060 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
2063 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2065 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
2068 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
2070 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
2071 m68010up, not just m68020up | cpu32.
2073 * Makefile.in (SONAME): New variable.
2074 ($(SHLINK)): Make a link to the transformed name, as well.
2075 (stamp-tshlink): New target.
2076 (install): Skip stamp-tshlink during install.
2078 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
2080 * configure.in: Call AC_ARG_PROGRAM.
2081 * configure: Rebuild.
2082 * Makefile.in (program_transform_name): New variable.
2083 (install): Transform library name before installing it.
2085 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
2087 * i960-dis.c (mem): Add HX dcinva instruction.
2089 Support for building as a shared library, based on patches from
2090 Alan Modra <alan@spri.levels.unisa.edu.au>:
2091 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
2092 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
2093 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
2094 * configure: Rebuild.
2095 * Makefile.in (ALLLIBS): New variable.
2096 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
2097 (COMMON_SHLIB, SHLINK): New variables.
2098 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
2099 (STAGESTUFF): Remove variable.
2100 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
2101 (stamp-piclist, piclist): New targets.
2102 ($(SHLIB), $(SHLINK)): New targets.
2103 ($(OFILES)): Depend upon stamp-picdir.
2104 (disassemble.o): Build twice if PICFLAG is set.
2105 (MOSTLYCLEAN): Add pic/*.o.
2106 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
2107 (distclean): Remove pic and stamp-picdir.
2108 (install): Install shared libraries.
2109 (stamp-picdir): New target.
2111 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
2113 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
2114 Print unknown instruction as "unknown", rather than in hex.
2116 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
2118 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
2120 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
2122 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
2124 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
2126 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
2127 when necessary. From Ulrich Drepper
2128 <drepper@myware.rz.uni-karlsruhe.de>.
2130 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
2132 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
2133 sparc_num_opcodes. Update architecture enum values.
2134 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
2135 (sparc_opcode_lookup_arch): New function.
2136 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
2137 (sparc_opcodes): Add v9a shutdown insn.
2139 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
2141 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
2142 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
2144 (print_insn_sparc64): Deleted.
2145 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
2148 * sparc-opc.c (architecture_pname): Add v9a.
2150 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
2152 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
2153 incorrectly defined as 0x16 when it should be 0x15.
2154 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
2155 (alpha_insn_set): added cvtst and cvttq float ops. Also added
2156 excb (exception barrier) which is defined in the Alpha
2157 Architecture Handbook version 2.
2158 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
2159 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
2160 disassembled as or, for example.
2162 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
2164 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
2165 (_print_insn_mips): Change i from int to unsigned int.
2167 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
2169 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
2170 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
2172 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
2174 * i386-dis.c: Added Pentium Pro instructions.
2176 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2178 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
2181 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2183 * sh-opc.h (sh_nibble_type): Added REG_B.
2184 (sh_arg_type): Added A_REG_B.
2185 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
2187 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
2189 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
2191 * disassemble.c (disassembler): Use new bfd_big_endian macro.
2193 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
2195 * Makefile.in (distclean): Remove stamp-h. From Ronald
2196 F. Guilmette <rfg@monkeys.com>.
2198 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2200 From David Mosberger-Tang <davidm@azstarnet.com>:
2201 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2204 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2206 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2207 (sh_table): Added many SH3 opcodes.
2208 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2210 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2212 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2213 (subco,subco.): Mark this PPC, not PPCCOM.
2215 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2217 * configure: Rebuild with autoconf 2.7.
2219 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2221 * configure: Rebuild with autoconf 2.6.
2223 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2225 * configure.in: Sort list of architectures. Accept but do nothing
2226 for alliant, convex, pyramid, romp, and tahoe.
2228 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2230 * a29k-dis.c (print_special): Change num to unsigned int.
2232 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2234 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2237 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2239 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2240 * configure: Rebuilt.
2242 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2244 * configure.in: Add case for bfd_i860_arch.
2245 * configure: Rebuild.
2247 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2249 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2250 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2251 (NEXTDOUBLE): Likewise.
2252 (print_insn_m68k): Don't match fmoveml if there is more than one
2253 register in the list.
2254 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2256 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2258 * m68k-opc.c: Use #W rather than #w.
2259 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2261 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2263 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2264 and likewise for all the dbxx opcodes.
2266 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2268 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2270 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2272 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2273 the VR4100 specific instructions to the mips_opcodes structure.
2275 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2277 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2278 ugly Metrowerks bug in CW6, is fixed in CW7.
2280 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2282 * ppc-opc.c (whole file): Add flags for common/any support.
2284 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2286 * Makefile.in (BISON): Remove macro.
2287 (FLAGS_TO_PASS): Remove BISON.
2289 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2291 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2293 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2294 instructions that take no args by looking at the match mask.
2295 (print_insn_arg): Always print "%" before register names.
2296 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2297 [case '_']: Don't print "@#" before address.
2298 [case 'J']: Use "%s" as format string, not register name.
2299 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2301 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2303 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2306 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2308 From David Mosberger-Tang <davidm@azstarnet.com>
2310 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2311 (alpha_insn_set): added definitions for VAX floating point
2312 instructions (Unix compilers don't generate these, but handcoded
2313 assembly might still use them).
2315 * alpha-dis.c (print_insn_alpha): added support for disassembling
2316 the miscellaneous instructions in the Alpha instruction set.
2318 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2320 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2321 no longer create sysdep.h, sed ppc-opc.c to work around a
2322 serious Metrowerks C bug.
2323 * mpw-make.in: Remove.
2324 * mpw-make.sed: New file, used by mpw-configure to edit
2325 Makefile.in into an MPW makefile.
2327 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2329 * Makefile.in (maintainer-clean): New synonym for realclean.
2331 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2333 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2334 which use '0', '1', and '2' instead. Specify the proper size for
2335 a pmove immediate operand. Correct the pmovefd patterns to be
2336 moves to a register, not from a register.
2337 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2339 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2341 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2342 %psr, %wim, %tbr as F_NOTV9.
2344 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2346 * Makefile.in (Makefile): Just rebuild Makefile when running
2348 (config.h, stamp-h): New targets.
2349 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2350 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2351 rebuilding config.h.
2352 * configure: Rebuild.
2354 * mips-opc.c: Change unaligned loads and stores with "t,A"
2355 operands to use "t,A(b)".
2357 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2359 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2361 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2363 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2364 until 3 instead of until 2.
2366 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2368 * Makefile.in (ALL_CFLAGS): Define.
2369 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2370 (MOSTLYCLEAN): Add config.log.
2371 (distclean): Don't remove config.log.
2372 * configure.in: Substitute HDEFINES.
2373 * configure: Rebuild.
2375 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2377 * sh-opc.h (sh_arg_type): Add F_FR0.
2378 (sh_table, case fmac): Add F_FR0 as first argument.
2380 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2382 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2384 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2386 * sparc-dis.c: Remove all references to NO_V9.
2388 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2390 * aclocal.m4: Just include ../bfd/aclocal.m4.
2391 * configure: Rebuild.
2393 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2395 * sparc-dis.c (X_DISP19): Define.
2396 (print_insn, case 'G'): Use it.
2397 (print_insn, case 'L'): Sign extend displacement.
2399 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2401 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2402 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2403 host_makefile_frag or frags.
2404 * aclocal.m4: New file.
2405 * configure: Rebuild.
2406 * Makefile.in (INSTALL): Set to @INSTALL@.
2407 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2408 (INSTALL_DATA): Set to @INSTALL_DATA@.
2410 (AR_FLAGS): Set to rc rather than qc.
2411 (CC): Define as @CC@.
2412 (CFLAGS): Set to @CFLAGS@.
2413 (@host_makefile_frag@): Remove.
2414 (config.status): Remove dependency upon @frags@.
2416 * configure.in: ../bfd/config.bfd now just sets shell variables.
2417 Use them rather than looking through target Makefile fragments.
2418 * configure: Rebuild.
2420 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2422 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2424 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2426 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2427 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2430 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2431 (lookup_{name,value}): New functions.
2432 (prefetch_table): New static local.
2433 (sparc_{encode,decode}_prefetch): New functions.
2434 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2436 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2438 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2441 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2443 * sh-dis.c: Correct comment on first line of file.
2445 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2447 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2449 * sparc-opc.c (asi, membar): New static locals.
2450 (sparc_{encode,decode}_{asi,membar}): New functions.
2451 (sparc_opcodes, membar insn): Fix.
2452 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2453 Support decoding of membar masks.
2456 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2458 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2460 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2462 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2463 and likewise for the other branches. Add bhs as an alias for bcc,
2464 and likewise for the size variants. Add dbhs as an alias for
2467 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2469 * sh-opc.h (FP sts instructions): Update to match reality.
2471 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2473 * m68k-dis.c: (fpcr_names): Add % before all register names.
2474 (reg_names): Likewise.
2475 (print_insn_arg): Don't explicitly print % before register names.
2476 Add % before register names in static array names. In case 'r',
2477 print data registers as `@(Dn)', not `Dn@'. When printing a
2478 memory address, don't print @# before it.
2479 (print_indexed): Change base_disp and outer_disp from int to
2480 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2481 syntax. Sign extend 8 byte displacement correctly.
2482 (print_base): Print using MIT syntax. Print zpc when appropriate.
2483 Change parameter disp from int to bfd_vma.
2485 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2488 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2490 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2491 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2492 * sh-opc.h (sh_arg_type): Add new operand types.
2493 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2495 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2497 * Makefile.in (distclean): Remove generated file config.h.
2499 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2501 * Makefile.in (distclean): Remove generated file config.h.
2503 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2505 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2507 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2509 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2510 rather than numopcodes. Use m68k_opcodes rather than removed
2511 opcode function. Don't check F_ALIAS.
2512 (print_insn_arg): Change first parameter to be const char *.
2513 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2514 (m68k-opc.o): New target.
2515 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2516 * configure: Rebuild.
2518 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2520 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2521 (opcode_bits, opcode_hash_table): New variables.
2522 (opcodes_initialized): Renamed from opcodes_sorted.
2523 (build_hash_table): New function.
2524 (is_delayed_branch): Use hash table.
2525 (print_insn): Renamed from print_insn_sparc, made static.
2526 Build and use hash table. If !sparc64, ignore sparc64 insns,
2527 and vice-versa if sparc64.
2528 (print_insn_sparc, print_insn_sparc64): New functions.
2529 (compare_opcodes): Move sparc64 opcodes to end.
2530 Print commutative insns with constant second.
2531 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2533 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2535 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2536 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2537 avoids printing a delay slot in a delay slot.
2538 * sh-opc.h (sh_table): Fully bracket last entry.
2540 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2542 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2544 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2546 * configure.in: Get host_makefile_frag from ${srcdir}.
2548 * configure.in: Autoconfiscated. Check for string[s].h. Create
2549 config.h from config.in. Don't set up sysdep.h link.
2550 * sysdep.h: New file.
2551 * configure, config.in: New files, generated from configure.in.
2552 * Makefile.in: Updated to be processed autoconf-style.
2553 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2554 (Makefile): Depend on config.status.
2555 (config.status): New rule.
2556 * configure.bat: Update Makefile substitutions.
2558 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2560 * mips-opc.c (L1): Define.
2561 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2562 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2565 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2567 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2568 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2569 have multiple add units but only a single logical unit.
2571 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2572 shifted by 18, without any insertion or extraction function.
2573 (insert_cr, extract_cr): Remove.
2575 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2577 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2580 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2582 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2583 * sh-opc.h: Add copyright.
2585 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2587 * Makefile.in (crunch-m68k): Delete extra target accidentally
2588 checked in a while ago.
2590 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2592 * sh-opc.h (sh_table): Add SH3 support.
2594 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2596 * sh-opc.h: Added bsrf and braf.
2598 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2600 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2601 bogus [ls]fm{ea,fd} patterns.
2603 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2604 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2605 initialize it from memory. Make function static.
2606 (print_insn_{big,little}_arm): New functions.
2607 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2608 the correct endianness.
2610 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2612 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2615 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2617 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2618 17th, so that it builds again using GCC as the compiler.
2620 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2622 * mips-dis.c (print_insn_little_mips): Cast return value from
2623 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2624 expects an unsigned long, and that might be fewer words of
2625 argument storage (e.g., if bfd_vma is long long on a 32-bit
2627 (print_insn_big_mips): Likewise with bfd_getb32 value.
2628 (_print_insn_mips): Now static.
2630 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2632 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2633 gcc memory hog problem with initializer is fixed.
2635 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2637 Merge in support for Mac MPW as a host.
2638 (Old change descriptions retained for informational value.)
2640 * mpw-config.in (archname): Compute from the config.
2641 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2643 * mpw-config.in (target_arch): Compute from canonical target.
2644 (m68k, mips, powerpc, sparc): Add architectures.
2645 * mpw-make.in (disassemble.c.o): Add.
2646 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2648 * mpw-config.in (BFD_MACHINES): Set to a default value.
2649 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2651 * mpw-make.in (CSEARCH): Add extra-include to search path.
2653 * mpw-config.in (varargs.h): Don't create.
2654 (sysdep.h): Create using forward-include.
2655 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2657 * mpw-config.in: New file, MPW version of configure.in.
2658 * mpw-make.in: New file, MPW version of Makefile.in.
2660 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2662 * alpha-dis.c (print_insn_alpha): Put empty statement after
2665 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2667 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2668 (low_sign_extend): Likewise.
2669 (get_field): Delete unused function.
2670 (set_field, deposit_14, deposit_21): Likewise.
2672 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2674 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2677 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2679 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2681 * alpha-opc.h (OSF_ASMCODE): define
2682 print pal-code names as defined in App C of the
2683 Alpha Architecture Reference Manual
2685 * alpha-dis.c: cleaned up output
2686 print stylized code forms as defined in App A.4.3 of the
2687 Alpha Architecture Reference Manual
2689 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2691 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2693 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2696 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2698 * m68k-dis.c (opcode): New function. Returns address of opcode
2699 table entry given index, even if the opcode table was split to
2700 work around gcc bugs.
2701 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2703 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2704 (reg_names): Now const.
2705 (print_insn_arg): Arrays cacheFieldName and names now const.
2706 (print_indexed): Array scales now const.
2708 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2710 * ppc-opc.c: Sort recently added instructions by minor opcode
2711 number within major opcode number.
2713 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2715 * hppa-dis.c: Include libhppa.h.
2717 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2719 * mips-opc.c: Change dli to use M_DLI, and add dla.
2721 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2723 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2725 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2727 * mips-opc.c: Add r4650 mul instruction.
2729 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2731 * mips-opc.c: Add uld and usd macros for unaligned double load and
2734 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2736 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2737 mfdcr, mtdcr, icbt, iccci.
2739 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2741 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2742 signed char fields to shorts, more portable.
2744 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2746 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2747 char fields as signed chars, since they may have negative values.
2749 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2751 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2752 (mycroft@netbsd.org).
2754 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2756 From "Logg, Ed" <elogg@ea.com>:
2757 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2758 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2761 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2763 * ppc-opc.c: Changes based on patch from David Edelsohn
2764 <edelsohn@mhpcc.edu>.
2765 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2768 (insert_tbr): New static function.
2769 (extract_tbr): New static function.
2770 (XFXFXM_MASK, XFXM): Define.
2771 (XSPRBAT_MASK, XSPRG_MASK): Define.
2772 (powerpc_opcodes): Add instructions to access special registers by
2773 name. Add mtcr and mftbu.
2775 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2777 * mips-opc.c (P3): Define.
2778 (mips_opcodes): Add mad and madu.
2780 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2782 * configure.in: Add W65 support.
2783 * disassemble.c: Likewise.
2784 * w65-opc.h, w65-dis.c: New files.
2786 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2788 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2791 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2793 * mips-opc.c: Add dli as a synonym for li.
2795 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2797 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2798 print something for reserved opcode values, even if it won't
2801 * mips-dis.c (_print_insn_mips): When initializing, shift right
2802 and mask, to avoid sign extension problems on the Alpha.
2804 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2807 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2809 * sh-opc.h (mov.l gbr): Get direction right.
2810 * sh-dis.c (print_insn_shx): New function.
2811 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2812 print opcodes with right byte order.
2814 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2816 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2817 to avoid conflicts with getopt.
2819 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2821 * hppa-dis.c (print_insn_hppa): Read the instruction using
2822 bfd_getb32, so that it works on a little endian or 64 bit host.
2823 Remove unused local variable op.
2825 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2827 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2828 addu does not work correctly if -mips3.
2830 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2832 * a29k-dis.c (print_special): Add special register names defined
2833 on 29030, 29040 and 29050.
2834 (print_insn): Handle new operand type 'I'.
2836 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2838 * Makefile.in (INSTALL): Use top level install.sh script.
2840 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2842 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2843 that it works on a little endian host.
2845 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2847 * configure.in: Use ${config_shell} when running config.bfd.
2849 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2851 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2853 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2855 * a29k-dis.c (print_insn): Print the opcode.
2857 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2859 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2861 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2863 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2865 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2867 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2868 which store a value into memory.
2870 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2872 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2873 * arm-dis.c, arm-opc.h: New files.
2875 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2877 * Makefile.in (ns32k-dis.o): Add dependency.
2878 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2879 string, not as array of chars.
2881 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2883 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2885 * sparc-opc.c: Added sparclite extended FP operations, and
2886 versions of v9 impdep* instructions permitting specification of
2889 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2891 * i960-dis.c (reg_names): Now const.
2892 (struct sparse_tabent): New type, copied from array type in mem
2894 (ctrl): Local static array ctrl_tab now const.
2895 (cobr): Local static array cobr_tab now const.
2896 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2897 static variable mem_tab no longer explicitly initialized. Changed
2898 mem_init to const array of struct sparse_tabent.
2899 (reg): Local static variable reg_tab no longer explicitly
2900 initialized. Changed reg_init to const array of struct
2902 (ea): Local static array scale_tab now const.
2904 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2907 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2909 * configure.bat: the disassember needs to be enabled for
2910 "objdump -d" to work in djgpp.
2912 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2914 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2915 (invalid_float): Enabled general version, doesn't require running
2916 on ns32k host. Changed to take char* argument, and test for
2917 explicitly specified sizes, instead of using sizeof() on host CPU
2919 (INVALID_FLOAT): Cast first argument.
2920 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2921 list_P032, list_M032): Now const.
2922 (optlist, list_search): Made appropriate arguments now point to
2924 (print_insn_arg): Changed static array of one-character-string
2925 pointers into a static const array of characters; fixed sprintf
2926 statement accordingly.
2928 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2930 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2931 from distribution. A ns32k-dis.c from a previous distribution has
2932 been brought up to date and supports the new interface.
2934 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2936 * configure.in: add bfd_ns32k_arch target support.
2938 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2939 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2941 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2943 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2946 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2948 * h8300-dis.c, mips-dis.c: Don't use true and false.
2950 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2952 * configure.in: Change --with-targets to --enable-targets.
2954 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2956 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2957 opcodes to the first instruction with that opcode, to speed
2958 disassembly of large files. From ralphc@pyramid.com (Ralph
2961 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2963 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2965 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2967 * configure.bat: update to latest makefile.in
2969 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2971 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2972 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2973 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2974 slot insn is in a delay slot.
2975 * z8k-opc.h: (resflg): Fix patterns.
2976 * h8500-opc.h Fix CR insn patterns.
2978 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2980 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2981 "cmpl" before POWER versions, so that gas -many uses them.
2983 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2985 * disassemble.c: New file.
2986 * Makefile.in (OFILES): Add disassemble.o.
2987 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2988 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2989 binutils/configure.in.
2991 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2992 opcode being examined.
2994 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2996 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2997 (insert_ral, insert_ram, insert_ras): New functions.
2998 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2999 RAS for store with update.
3001 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3003 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
3004 (edelsohn@npac.syr.edu).
3006 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3008 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
3011 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
3013 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
3015 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3017 * ppc-opc.c (powerpc_operands): The signedp field has been
3018 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
3019 instead. Add new operand SISIGNOPT.
3020 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
3021 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
3022 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
3025 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3027 * i386-dis.c (struct private): Renamed to dis_private. `private'
3028 is a reserved word for dynix cc.
3030 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3032 * configure.in: Change error message to refer to bfd/config.bfd
3033 rather than bfd/configure.in.
3035 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
3037 * ppc-opc.c: Define POWER2 as short alias flag.
3038 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
3041 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3043 * i960-dis.c (print_insn_i960): Don't read a second word for
3044 opcodes 0, 1, 2 and 3.
3046 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3048 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
3050 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3052 * m68881-ext.c: Removed; no longer used.
3053 * Makefile.in: Changed accordingly.
3055 * m68k-dis.c (ext_format_68881): Don't declare.
3056 (print_insn_m68k): If an instruction uses place 'i', it uses at
3057 least four fixed bytes.
3058 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
3059 extended float, convert to double using floatformat_to_double, not
3060 ieee_extended_to_double, and fetch the data before converting it.
3062 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3064 * mips-opc.c: It's sqrt.s, not sqrt.w. From
3065 davidj@ICSI.Berkeley.EDU (David Johnson).
3067 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3069 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
3070 PowerPC uses bdnz[l][a].
3072 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3074 * dis-buf.c, i386-dis.c: Include sysdep.h.
3076 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3078 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
3080 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
3081 by Motorola PowerPC 601 with PPC_OPCODE_601.
3082 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
3083 Disassemble Motorola PowerPC 601 instructions as well as normal
3084 PowerPC instructions.
3086 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
3088 * i960-dis.c (reg, mem): Just use a static array instead of
3091 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3093 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
3094 condition name index if this is for a negated condition.
3096 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
3097 Floating point format for 'H' operand is backwards from normal
3098 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
3099 operands (fmpyadd and fmpysub), handle bizarre register
3100 translation correctly for single precision format.
3102 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
3103 or 'I' operands if the next format specifier is 'M' (fcmp
3104 condition completer).
3106 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3108 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
3109 single number giving a bitmask for the MB and ME fields of an M
3110 form instruction. Change NB to accept 32, and turn it into 0;
3111 also turn 0 into 32 when disassembling. Seperated SH from NB.
3112 (insert_mbe, extract_mbe): New functions.
3113 (insert_nb, extract_nb): New functions.
3114 (SC_MASK): Mask out SA and LK bits.
3115 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
3116 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
3117 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
3118 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
3119 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
3120 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
3121 (powerpc_macros): Define table of macro definitions.
3122 (powerpc_num_macros): Define.
3124 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
3125 if PPC_OPERAND_NEXT is set.
3127 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3129 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
3130 char. Retrieve contents using bfd_getl32 instead of shifting.
3132 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3134 * ppc-opc.c: New file. Opcode table for PowerPC, including
3135 opcodes for POWER (RS/6000).
3136 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
3137 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
3138 (CFILES): Add ppc-dis.c.
3139 (ppc-dis.o, ppc-opc.o): New targets.
3140 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
3142 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
3144 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
3145 No space before 'u', 'f', or 'N'.
3147 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
3149 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
3150 farther than we should.
3152 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
3154 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3156 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
3158 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
3160 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
3161 needs it, to prevent reading past the end of a section.
3163 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3165 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
3166 Removed t,A case for la; always use t,A(b) case.
3168 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3170 From Ted Lemen <mellon@pepper.ncd.com>
3171 * mips-dis.c (print_insn_arg): Handle 'k'.
3172 * mips-opc.c: Make cache use k, not t.
3174 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3176 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
3177 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
3178 FLOAT_FORMAT_CODE to put out floating point register names.
3180 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3182 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
3184 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
3188 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3190 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
3191 larger than 32. Moved dsxx32 variants first for disassembler.
3193 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3195 * z8kgen.c, z8k-opc.h: Add full lda information.
3197 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3199 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3200 movb instructions. Any necessary space will be emitted by
3201 the code to handle nullification completers.
3203 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3205 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3207 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3209 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3210 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3212 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3214 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3216 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3218 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3219 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3221 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3223 * m88k-dis.c (m88kdis): comment change. Remove space after
3225 (printop): handle new arg types DEC and XREG for m88110.
3227 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3229 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3230 type for absolute branch addresses. Delete special
3231 "ble" and "be" code in 'W' operand code.
3233 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3235 * mips-opc.c: Set hazard information correctly for branch
3236 likely instructions.
3238 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3240 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3241 info->fprintf_func for printing and info->print_address_func for
3244 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3246 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3248 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3250 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3251 Corrected second case of "b" for disassembler.
3253 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3255 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3256 to BFD swapping routines to correspond to BFD name changes.
3258 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3260 * mips-opc.c: Change div machine instruction to be z,s,t rather
3261 than s,t. Change div macro to be d,v,t rather than d,s,t.
3262 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3263 rem and remu which generates only the corresponding div
3264 instruction. This is for compatibility with the MIPS assembler,
3265 which only generates the simple machine instruction when an
3266 explicit destination of $0 is used.
3267 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3269 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3271 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3272 WR_31 hazard for bal, bgezal, bltzal.
3274 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3276 * hppa-dis.c (print_insn_hppa): Use print function
3277 from within the disassemble_info, not fprintf_filtered.
3279 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3281 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3282 Law, law@cs.utah.edu.)
3284 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3286 * mips-opc.c ("absu"): Removed.
3289 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3291 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3292 Changed hazard information to distinguish between memory load
3293 delays and coprocessor load delays.
3295 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3297 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3299 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3301 * configure.in: Don't pass cpu to config.bfd.
3303 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3305 * m88k-dis.c (m88kdis): Make class unsigned.
3307 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3309 * alpha-dis.c (print_insn_alpha): One branch format case was
3310 missing the instruction name.
3312 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3314 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3315 Add the arch-specific auxiliary files.
3316 (OFILES): Remove the arch-specific auxiliary files
3317 and use BFD_MACHINES instead of DIS_LIBS.
3318 * configure.in: Set BFD_MACHINES based on --with-targets option.
3320 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3322 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3325 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3327 * sparc-opc.c: Change CONST to const to deal with gcc
3328 -Dconst=__const -traditional.
3330 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3332 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3333 coprocessor instructions out of #if 0, and made them use new
3336 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3338 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3340 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3342 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3343 instruction, for use by the disassembler.
3345 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3346 hand-coded sign extensions that depended on 32-bit host ints.
3347 FIXME, we still depend on big-endian host bitfield ordering.
3348 (sparc_print_insn): Set the insn_info_valid field, and the
3349 other fields that describe the instruction being printed.
3351 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3353 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3354 `jmp' instead of just one of them.
3356 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3358 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3359 (fput_fp_reg_r): Renamed from fput_reg_r.
3360 (fput_fp_reg): New function.
3361 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3363 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3365 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3367 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3369 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3371 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3372 don't output a space.
3374 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3376 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3378 * mips-opc.c: New file, containing opcode table from
3379 ../include/opcode/mips.h.
3380 * Makefile.in: Add it.
3382 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3384 * m88k-dis.c: New file, moved in from gdb and changed to use the
3385 new dis-asm.h disassembler interface.
3386 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3387 (m88k-dis.o): New target.
3389 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3391 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3392 argument string const char * to correspond to opcode/mips.h.
3394 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3396 * mips-dis.c: Updated to account for name changes in new version
3398 * Makefile.in: Added header file dependencies.
3400 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3402 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3404 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3406 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3407 extend, rather than shifts.
3409 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3411 * Makefile.in: Undo 15 June change.
3413 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3415 * m68k-dis.c (print_insn_arg): Change return value to byte count
3417 * m68k-dis.c: Re-write to detect invalid operands before
3418 printing anything, so we can handle this the same way we
3419 handle invalid opcodes.
3421 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3423 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3425 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3427 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3430 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3432 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3434 * configure.in: Do make sysdep.h link.
3435 * Makefile.in: Search ../include. Don't search ../bfd.
3437 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3439 Changes from Jeff Law, law@cs.utah.edu:
3440 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3441 Do not print a space before the completers specified by
3444 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3446 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3447 defined, since gdb has been fixed.
3449 Changes from Jeff Law, law@cs.utah.edu:
3450 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3451 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3452 be a *disassemble_info, not a *FILE.
3453 * hppa-dis.c: Support 'd', '!', and 'a'.
3454 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3455 * hppa-dis.c: Delete cases which are no longer needed.
3457 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3459 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3461 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3463 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3466 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3468 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3469 * configure.in: No longer need to configure to get sysdep.h.
3471 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3473 * Patches from Jeffrey Law <law@cs.utah.edu>.
3474 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3475 templates for 1.1 FP computational instructions.
3477 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3479 * h8500-dis.c (print_insn_h8500): Address argument is type
3481 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3484 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3485 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3487 * sparc-dis.c (compare_opcodes): Move static declaration to
3490 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3492 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3493 instruction, remove unimp hack from 'l' argument.
3495 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3497 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3500 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3502 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3503 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3506 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3508 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3509 arrays of string pointers to 2-d arrays of chars, to save
3512 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3514 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3515 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3517 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3519 * hppa-dis.c: New file from Utah, adapted to new disassembler
3521 * Makefile.in: Include it.
3523 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3525 * sh-dis.c, sh-opc.h: New files.
3527 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3529 * alpha-dis.c, alpha-opc.h: New files.
3531 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3533 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3536 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3538 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3540 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3542 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3545 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3547 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3548 and double percent signs a few places.
3550 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3552 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3553 Use info->print_address_func not print_address.
3555 * dis-buf.c (generic_print_address): New function.
3557 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3559 * Makefile.in: Add sparc-dis.c.
3560 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3562 Add `add' instruction to the set that get checked
3563 for a preceding `sethi' in order to print an absolute address.
3564 * (print_insn): Disassembly prefers real instructions.
3565 (is_delayed_branch): Speed up.
3566 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3567 Still missing some float ops, and needs testing.
3568 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3569 F_ALIAS. Use printf, not fprintf, when not passing a file
3571 (compare_opcodes): Check that identical instructions have
3572 identical opcodes, complain otherwise.
3575 * Include reg_names.
3577 Use dis-asm.h/read_memory_func interface.
3579 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3581 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3582 deliberately return non-zero to setjmp from longjmp. Otherwise
3583 this code fails to compile.
3585 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3587 * m68k-dis.c: Fix prototype for fetch_arg().
3589 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3591 * dis-buf.c: New file, for new read_memory_func interface.
3592 Makefile.in (OFILES): Include it.
3593 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3594 Use new read_memory_func interface.
3596 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3598 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3599 * h8500-opc.h: Fix couple of opcodes.
3601 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3603 * Makefile.in: add dvi & installcheck targets
3605 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3607 * Makefile.in: Update for h8500-dis.c.
3609 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3611 * h8500-dis.c, h8500-opc.h: New files
3613 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3615 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3616 ../include/dis-asm.h.
3617 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3618 and ../gdb/m68k-pinsn.c).
3619 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3620 and ../gdb/i386-pinsn.c).
3621 * m68881-ext.c: New file. Moved definition of
3622 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3623 * Makefile.in: Adjust for new files.
3624 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3625 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3626 can be dis-assembled.
3628 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3630 * mips-dis.c (print_insn_arg): Now returns void.
3632 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3634 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3635 files that use the macros.
3637 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3639 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3640 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3641 (CFILES): Added mips-dis.c.
3643 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3645 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3646 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3648 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3650 * Makefile.in: Improve *clean rules.
3651 * configure.in: Allow a default host.
3653 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3655 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3656 files include other sysdep files
3658 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3660 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3662 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3664 * configure.in: For host support, use ../bfd/configure.host
3665 so it stays in sync with the ../bfd/hosts database.
3667 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3669 * configure.in: use cpu-vendor-os triple instead of nested cases
3671 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3673 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3674 *always* the wrong one.
3676 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3678 * z8kgen.c: added copyright info
3680 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3682 * z8k-dis.c (unparse_instr): prettier tabs
3683 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3685 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3687 * configure.in: Add ncr* configuration.
3688 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3689 picayune ANSI compilers happy.
3691 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3693 * configure.in (i386): Make i386 and i486 synonymous for now.
3694 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3696 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3698 * Makefile.in (install): Fix typo.
3700 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3702 * Makefile.in (make): Remove obsolete crud.
3703 (sparc-opc.o): Avoid Sun Make VPATH bug.
3705 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3707 * Makefile.in: since there are no SUBDIRS, remove rule and
3708 references of subdir_do.
3710 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3712 * Makefile.in (install): Get the library name right here too.
3713 Don't install bfd.h, since it's unrelated to this library. No
3714 subdirs to recurse into, either.
3715 (CFILES): The source file has a .c suffix, not .o.
3717 * sparc-opc.c: New file, moved from BFD.
3718 * Makefile.in (OFILES): Build it.
3720 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3722 * z8k-dis.c: fixed forward refferences of some declarations.
3724 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3726 * Makefile.in: get the name of the library right
3728 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3730 * z8k-dis.c: knows how to disassemble z8k stuff
3731 * z8k-opc.h: new file full of z8000 opcodes
3735 version-control: never
projects / external / binutils.git / blob