2 Thu Nov 26 11:26:32 1998 Dave Brolley <brolley@cygnus.com>
4 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Regenerated.
6 Tue Nov 24 11:20:54 1998 Dave Brolley <brolley@cygnus.com>
8 * fr30-asm.c,fr30-dis.c: Regenerated.
10 Mon Nov 23 18:28:48 1998 Dave Brolley <brolley@cygnus.com>
12 * fr30-asm.c,fr30-dis.c,fr30-opc.c,fr30-opc.h: Regenerated.
14 1998-11-20 Doug Evans <devans@tobor.to.cygnus.com>
16 * fr30-opc.c: Regenerated.
18 Thu Nov 19 16:02:46 1998 Dave Brolley <brolley@cygnus.com>
20 * fr30-opc.c: Regenerated.
21 * fr30-opc.h: Regenerated.
22 * fr30-dis.c: Regenerated.
23 * fr30-asm.c: Regenerated.
26 Thu Nov 19 07:54:15 1998 Doug Evans <devans@charmed.cygnus.com>
28 * mips-opc.c (sync.p,sync.l): Swap insn values.
31 1998-11-19 Doug Evans <devans@tobor.to.cygnus.com>
33 * fr30-opc.c: Regenerate.
35 Wed Nov 18 21:36:37 1998 Dave Brolley <brolley@cygnus.com>
37 * fr30-opc.c: Regenerated.
38 * fr30-opc.h: Regenerated.
41 1998-11-18 Doug Evans <devans@casey.cygnus.com>
43 * cgen-asm.in (insert_1): Replace calls to bfd_getb8/putb8.
44 (insert_normal, !CGEN_INT_INSN_P case): Only fetch enough bytes
46 (insert_insn_normal): Fix typo.
47 * cgen-dis.c (cgen_dis_lookup_insn): Update type of `value' arg.
48 * cgen-dis.in (extract_normal): Ditto. New arg `pc'.
49 Rewrite ! CGEN_INT_INSN_P case.
50 (extract_insn_normal): Ditto.
51 (extract_1): New arg `pc'. All callers updated.
52 Replace calls to bfd_getb8.
54 * cgen-opc.c (cgen_{get,put}_insn_value): Move here ...
55 * cgen-opc.in: ... from here.
56 (@arch@_cgen_lookup_insn): Rewrite ! CGEN_INT_INSN_P case.
57 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Rebuild.
59 * fr30-asm.c,fr30-dis.c,fr30-opc.c: Rebuild.
63 Wed Nov 18 11:30:04 1998 Dave Brolley <brolley@cygnus.com>
65 * fr30-opc.c: Regenerated.
67 Mon Nov 16 19:21:48 1998 Dave Brolley <brolley@cygnus.com>
69 * fr30-opc.c: Regenerated.
70 * fr30-opc.h: Regenerated.
71 * fr30-dis.c: Regenerated.
72 * fr30-asm.c: Regenerated.
74 Thu Nov 12 19:24:18 1998 Dave Brolley <brolley@cygnus.com>
76 * po/opcodes.pot: Regenerated.
77 * fr30-opc.c: Regenerated.
78 * fr30-opc.h: Regenerated.
79 * fr30-dis.c: Regenerated.
80 * fr30-asm.c: Regenerated.
82 Tue Nov 10 15:26:27 1998 Nick Clifton <nickc@cygnus.com>
84 * disassemble.c (disassembler): Add support for FR30 target.
87 Tue Nov 10 11:00:04 1998 Doug Evans <devans@canuck.cygnus.com>
90 * cgen-dis.in (print_normal): CGEN_OPERAND_FAKE renamed to
91 CGEN_OPERAND_SEM_ONLY.
93 * m32r-dis.c,m32r-opc.c,m32r-opc.h: Rebuild.
95 * fr30-dis.c,fr30-opc.c,fr30-opc.h: Rebuild.
97 Mon Nov 9 18:22:55 1998 Dave Brolley <brolley@cygnus.com>
99 * po/opcodes.pot: Regenerate.
100 * po/POTFILES.in: Regenerate.
101 * fr30-opc.c: Regenerate.
102 * fr30-opc.h: Regenerate.
104 Fri Nov 6 17:21:38 1998 Doug Evans <devans@canuck.cygnus.com>
106 * m32r-asm.c: Regenerate.
109 Wed Nov 4 18:46:47 1998 Dave Brolley <brolley@cygnus.com>
111 * configure.in: Added case for bfd_fr30_arch.
112 * Makefile.am (CFILES): Added fr30-asm.c, fr30-dis.c, fr30-opc.c.
113 (ALL_MACHINES): Added fr30-asm.lo, fr30-dis.lo, fr30-opc.lo.
114 (CLEANFILES): Added stamp-fr30.
116 * fr30-asm.c: New file.
117 * fr30-dis.c: New file.
118 * fr30-opc.c: New file.
119 * fr30-opc.h: New file.
120 * po/POTFILES.in: Regenerated
121 * po/opcodes.pot: Regenerated
125 Mon Nov 2 20:08:03 1998 Doug Evans <devans@canuck.cygnus.com>
127 * m32r-opc.c (m32r_cgen_insn_table_entries): Add FILL_SLOT attribute
128 to bcl8,bncl8 entries.
129 (macro_insn_table_entries): Add FILL_SLOT attribute
130 to bcl8r,bncl8r entries.
133 Mon Nov 2 15:05:33 1998 Geoffrey Noer <noer@cygnus.com>
135 * configure.in: detect cygwin* instead of cygwin32*
136 * configure: regenerate
138 Tue Oct 27 08:58:37 1998 Gavin Romig-Koch <gavin@cygnus.com>
140 * mips-opc.c (IS_M): Added.
143 Fri Oct 23 12:06:00 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
145 * mips-opc.c (vrget, vclipw, vrnext): Correct COP2 opcodes
149 Mon Oct 19 13:03:19 1998 Doug Evans <devans@seba.cygnus.com>
151 start-sanitize-cygnus
152 * cgen-asm.in (insert_1): New function.
153 (insert_normal): Progress on handling ! CGEN_INT_INSN_P.
154 (insert_insn_normal): Update handling of CGEN_INT_INSN_P.
155 (@arch@_cgen_assemble_insn): Update type of `buf' arg.
156 * cgen-dis.in (extract_1): New function.
157 (extract_normal): buf_ctrl renamed to ex_info, update type.
158 Progress on handling of CGEN_INT_INSN_P.
159 (extract_insn_normal): buf_ctrl renamed to ex_info, update type.
160 Update handling of CGEN_INT_INSN_P. Handle errors from
161 @arch@_cgen_extract_operand.
162 (print_insn): Renamed from print_int_insn. Handle ! CGEN_INT_INSN_P.
163 (default_print_insn): Renamed from print_insn.
164 Handle ! CGEN_INT_INSN_P.
165 (print_insn_@arch@): Handle error returns from print_insn.
166 * cgen-opc.in (cgen_get_insn_value, cgen_put_insn_value): New fns.
167 (@arch@_cgen_lookup_insn): Update handling of CGEN_INT_INSN_P.
168 (@arch@_cgen_lookup_get_insn_operands): Ditto.
170 * m32r-opc.c,m32r-opc.h,m32r-asm.c,m32r-dis.c: Regenerate.
173 Wed Oct 14 12:12:25 1998 Jeffrey A Law (law@cygnus.com)
175 * m10300-opc.c: Allow autoincrement stores using the same register
176 for source and destination operands.
178 Mon Oct 12 10:43:51 1998 Jeffrey A Law (law@cygnus.com)
180 * m10300-opc.c: DSP instrutions which only write to one general
181 register have no restrictions on matching operands.
183 * m10300-opc.c (lsr_add): Fix typo for "lsr_add imm,reg,reg,reg" case.
186 Fri Oct 9 14:01:56 1998 Doug Evans <devans@seba.cygnus.com>
188 * m32r-opc.h,m32r-opc.c: Regenerate.
191 Thu Oct 8 06:04:38 1998 Jeffrey A Law (law@cygnus.com)
193 * m10300-opc.c (asr, lsr, asl): Fix am33 single bit shift opcode.
196 Sun Oct 4 21:01:44 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
198 * i386-dis.c (OP_3DNowSuffix): New static function.
201 (dis386_twobyte): Add GRP14, femms, and 3DNow entries.
202 (twobyte_has_modrm): Set entries corresponding to GRP14, 3DNow.
203 (insn_codep): New static variable.
204 (print_insn_x86): Init insn_codep after prefixes.
205 (grps): Add GRP14 entries for prefetch, prefetchw.
208 From Jeff B Epler <jepler@usgs.gov>
209 * i386-dis.c (Suffix3DNow): New table.
211 Wed Sep 30 10:17:50 1998 Nick Clifton <nickc@cygnus.com>
213 * d10v-opc.c: Treat TRAP as if it were a branch type instruction.
215 Mon Sep 28 14:35:43 1998 Martin M. Hunt <hunt@cygnus.com>
217 * d10v-dis.c (print_operand): If num is nonzero, then
218 add OPERAND_ACC1, not OPERAND_ACC0.
220 Thu Sep 24 09:20:03 1998 Nick Clifton <nickc@cygnus.com>
222 * d30v-opc.c: Add FLAG_JSR attribute to DBT, REIT, RTD, and TRAP
225 Tue Sep 22 17:55:14 1998 Nick Clifton <nickc@cygnus.com>
227 * d30v-opc.c: Add use of EITHER_BUT_PREFER_MU execution unit
231 Fri Sep 18 16:23:32 1998 Doug Evans <devans@canuck.cygnus.com>
233 * dvp-opc.c (gif_opcodes): Support EOP on gifimage.
236 Tue Sep 15 15:14:45 1998 Doug Evans <devans@canuck.cygnus.com>
238 * m32r-opc.h,m32r-opc.c: Add bbpc,bbpsw support.
240 start-sanitize-nortel-ppc750
241 1998-09-09 Michael Meissner <meissner@cygnus.com>
243 * ppc-opc.c (powerpc_opcodes): Add support for PowerPC 750 move
246 end-sanitize-nortel-ppc750
247 Fri Sep 4 19:42:59 1998 Nick Clifton <nickc@cygnus.com>
249 * arm-dis.c (print_insn_big_arm): Detect Thumb symbols in elf
251 (print_insn_little_arm): Detect Thumb symbols in elf object
254 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
256 * alpha-dis.c (print_insn_alpha): Use the machine type to
257 decide which PALcode set to include.
259 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
261 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
263 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
265 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
266 MSUB and MSUBS instructions.
269 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
271 * mips-opc.c: Insert contents of vu0.h, rather than including it.
273 * Makefile.am: Rebuild dependencies.
277 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
279 * ppc-opc.c (powerpc_operands): Omit parens around additions in
282 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
284 start-sanitize-coldfire
285 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
286 ColdFire, as below for mulsl and mulul.
288 end-sanitize-coldfire
289 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
290 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
291 +, -, and d for ColdFire.
293 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
294 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
295 (extract_mbe): Likewise.
297 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
299 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
301 * m10300-opc.c: First cut at UDF instructions.
303 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
305 * m32r-opc.c: Regenerate (remove semantic descriptions).
307 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
309 * arm-dis.c (print_insn_big_arm): Fix indentation.
310 (print_insn_little_arm): Likewise.
312 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
314 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
316 (print_insn_little_arm): Likewise.
318 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
320 Move all global state data into opcode table struct, and treat
321 opcode table as something that is "opened/closed".
322 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
323 (cgen_asm_init): Delete.
324 (cgen_set_parse_operand_fn): New function.
325 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
326 (cgen_dis_init): Delete.
327 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
328 (cgen_current_{opcode_table_mach,endian}): Delete.
329 start-sanitize-cygnus
330 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
331 * cgen-dis.in (all fns): Ditto.
332 * cgen-opc.in (all fns): Ditto.
334 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
336 start-sanitize-cygnus
337 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
339 * cgen-dis.in (print_normal): Split into two.
340 (print_address): New function.
341 (extract_insn_normal): Clarify insn_value arg.
342 (print_int_insn): Renamed from print_insn.
343 (print_insn): New arg.
344 (print_insn_@arch@): Open opcode table if not already done so.
345 Move reading of insn into print_insn.
348 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
350 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
354 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
356 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
357 accept an accumulator choice.
358 * m32r-opc.c,m32r-opc.h: Regenerate.
361 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
363 * m10300-opc.c: Add entries for "no_match_operands" field in
367 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
369 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
373 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
375 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
378 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
380 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
382 * m10300-opc.c: Add autoincrement memory loads/stores.
386 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
388 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
389 phmsubh respectively.
392 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
394 start-sanitize-cygnus
395 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
397 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
398 @arch_cgen_get_int_operand.
399 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
400 Update call to @arch@_cgen_insert_operand.
401 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
402 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
403 (extract_insn_normal): New arg `pc', callers updated.
404 Update call to @arch@_cgen_extract_operand.
405 (print_insn): Update call to CGEN_EXTRACT_FN.
407 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
410 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
412 * m10300-opc.c: Fix load to sp and store from sp for the am33.
413 Add more multimedia instructions.
415 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
417 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
422 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
424 * mips-opc.c (pref): Enabled for the r5900.
427 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
429 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
431 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
433 (OP_J): Remove unnecessary subtraction when 16-bit displacement
434 will be masked later.
437 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
439 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
442 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
444 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
445 from raw register #s to symbolic names to make debugging easier.
448 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
450 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
452 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
454 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
455 start-sanitize-cygnus
456 * Makefile.am (CGENDIR): Set via configure.
457 (CGEN): New variable.
458 (CGENFILES): object.scm renamed to cos.scm.
459 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
460 (stamp-m32r): Pass prefix to run-cgen.
461 * Makefile.in: Regenerate.
462 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
463 * cgen-dis.in: Ditto.
464 * cgen-opc.in: Ditto.
465 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
466 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
467 * configure: Regenerate.
471 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
473 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
475 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
477 * m10300-opc.c: Reorder more instructions so that we do not
478 accidentally match a mn10300 instruction when we really
479 wanted an am33 instruction.
482 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
484 * m10300-dis.c: Only recognize instructions from the currently
486 * m10300-opc.c: Add field indicating the particular variant of
487 the mn10300 each instruction is available on.
489 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
491 * configure.in: For bfd_vax_arch, build vax-dis.lo.
492 * Makefile.am: Rebuild dependencies.
493 (CFILES): Add vax-dis.c.
494 (ALL_MACHINES): Add vax-dis.lo.
495 * aclocal.m4: Rebuild with current libtool.
496 * configure, Makefile.in: Rebuild.
498 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
500 * vax-dis.c: New file, from work by Pauline Middelink
501 <middelin@polyware.iaf.nl>.
502 * disassemble.c (ARCH_vax): Define if ARCH_all.
503 (disassembler): Add case for ARCH_vax.
504 * makefile.vms: Support compilation on vms/vax.
507 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
509 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
510 the DVP_OPERAND_RELOC_11_S4 relocation.
514 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
516 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
518 (disassemble): Correctly handle FMT_D10 instructions.
520 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
521 am33 shift instructions.
523 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
525 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
526 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
528 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
529 (mn10300_opcodes): Reorder so as to try and select opcodes from
530 the core chip when multiple alternatives exist. Change several
531 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
532 "macbu" instructions. Fix typos in a couple DSP instructions too.
535 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
537 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
538 related to sign extension and the size of ints.
540 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
542 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
543 instructions. Support (sp) addressing mode by expanding it into
547 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
549 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
550 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
551 be used as immediate values.
555 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
557 * m10300-opc.c: Support 4 byte DSP instructions.
560 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
562 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
565 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
567 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
570 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
572 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
575 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
577 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
578 found on the mn10300.
581 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
583 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
586 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
588 * mips-dis.c (print_insn_little_mips): Previously, instruction
589 printing references the symbol table to determine whether the
590 instruction resides in a block regular instructions or mips16
591 instructions. However, when the disassembler gets used in other
592 environments where the symbol table is not present, we no longer
593 rely in the symbol table, rather, use the low bit of the
594 instructions address to guess. There should be no change for usage
595 of the disassembler in host based programse, gdb ,objdump.
596 (print_insn_big_mips): ditto.
597 (print_insn_mips): ditto
599 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
601 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
603 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
606 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
607 operands for the am33.
608 (mn10300_opcodes): Add new instructions from the am33.
610 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
612 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
614 * i386-dis.c (index16): Add '%' to register names. Use ','
617 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
619 * i386-dis.c: Don't print opcode suffix when we can figure out the
620 size (and gas can!) by register operands, or from the default
622 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
624 (dis386, dis386_twobyte, grps): Use new suffix macros.
625 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
626 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
627 order of cmps operands to agree with Intel docs. Correct operand
628 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
629 agree with Intel docs.
630 (print_insn_x86): Print orphan fwait before other prefixes.
631 Return correct byte count for orphan fwait with prefixes. Don't
632 print `bound' operands in reverse order.
633 (ckprefix): Stop accumulating prefixes if we get fwait.
634 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
636 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
638 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
639 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
641 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
643 Fix problems when bfd_vma is wider than long.
644 * i386-dis.c: Make op_address and start_pc unsigned.
645 (set_op): Make parameter unsigned.
646 (print_insn_x86): Cast to bfd_vma when passing a value to
648 * ns32k-dis.c (CORE_ADDR): Don't define.
649 (print_insn_ns32k): Change type of addr to bfd_vma. Use
650 bfd_scan_vma to read back address.
651 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
653 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
654 (NEXTULONG): New definition.
655 (print_insn_m68k): Avoid overflow when computing third argument of
657 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
658 Use disp instead of val to store offset values.
659 (print_indexed): Use base_disp instead of word to store base
660 displacement, to avoid overflow.
661 * m10300-dis.c (disassemble): Cast value to long when computing
662 pc-relative address, to get correct sign extension.
664 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
666 * m32r-opc.c: Regenerate.
668 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
670 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
671 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
673 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
675 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
677 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
679 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
681 (OP_DSreg): Rename from OP_DSSI.
682 (OP_ESreg): Rename from OP_ESDI.
683 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
685 (append_seg): Rename from append_prefix.
686 (ptr_reg): New function.
687 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
689 (PREFIX_ADDR): Rename from PREFIX_ADR.
690 (float_reg): Add non-broken opcodes for people who don't want
693 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
695 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
698 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
700 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
702 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
704 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
705 0; produce error message for shifts of size 32 (or 64 for 64-bit
706 shifts), because the hardware doesn't support them.
709 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
711 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
714 * vu0.h (sqc2): Fix opcode.
716 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
720 start-sanitize-cygnus
721 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
723 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
724 Change pinfo to use WR_HILO.
727 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
729 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
730 LONG_2, LONG_2b formats to use this new operand.
732 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
734 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
736 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
738 * sparc-dis.c (print_insn_sparc): big endian instruction / little
741 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
743 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
744 and SHORT_B3b formats to use Rb instead of Ra.
746 Add FLAG_MUL16 to MUL2XH opcode.
748 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
749 to existing 1.1.1 parallelisation prohibition procedure.
751 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
753 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
754 * cgen-dis.in (extract_normal): Likewise.
755 * m32r-asm.c,m32r-dis.c: Regenerate.
758 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
760 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
764 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
766 * mips-opc.c (multu1): Add two operand variant for the r5900.
769 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
771 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
772 with a shift count of 0.
775 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
777 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
779 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
781 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
782 (_print_insn_mips): Likewise.
783 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
787 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
789 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
790 (cgen_hw_lookup_by_num): New function.
793 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
796 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
798 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
800 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
802 * sparc-dis.c (print_insn_sparc): Always fetch instructions
803 as big-endian on SPARClite.
806 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
808 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
810 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
814 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
816 * d30v-opc.c (pre_defined_register): Remove alias for r0.
819 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
821 * mips-opc.c (break): Added 20-bit single-operand break
822 instruction for R5900 only.
825 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
827 * po/Make-in (install-info): New target.
829 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
831 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
832 * configure: Rebuild.
834 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
836 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
837 variety of ISA2 instructions to set bottom ten bits of trap code.
839 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
841 * Makefile.am (config.status): Add explicit target so that
842 config.status depends upon bfd/configure.in.
843 * Makefile.in: Rebuild.
845 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
847 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
848 instructions to set bottom ten bits of break code.
849 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
850 for above optional argument.
852 start-sanitize-cygnus
853 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
855 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
856 * m32r-opc.h: Regenerate.
859 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
861 * makefile.vms: Run dec c with /nodebug.
863 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
865 * Makefile.in: Rebuilt.
866 * Makefile.am: Regenerated dependencies with mkdep.
868 * opintl.h (_): Define as dgettext.
870 start-sanitize-cygnus
871 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
873 * configure.in: Add support for --enable-cgen-maint.
874 * Makefile.am (M32R_DEPS): New variable.
875 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
876 * aclocal.m4: Regenerate.
877 * Makefile.in: Regenerate.
878 * configure: Regenerate.
880 * Makefile.am (CGENFILES): Add minsn.scm.
883 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
885 * cgen-asm.c: Internationalised.
886 start-sanitize-cygnus
887 * cgen-asm.in: Internationalised.
888 * cgen-opc.in: Internationalised.
890 * m32r-asm.c: Internationalised.
891 * m32r-dis.c: Internationalised.
892 * m32r-opc.c: Internationalised.
894 * aclocal.m4: Regenerated.
895 * configure: Regenerated.
896 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
897 * Makefile.in: Rebuild.
898 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
899 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
901 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
903 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
905 * aclocal.m4, configure: Rebuild with current tools.
907 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
909 * opintl.h: New file - contains internationalisation macros used
910 by source files in this directory.
911 * po/: New subdirectory - contains internationalisation files.
912 * po/Make-in: New file - Makefile constructor.
913 * po/POTFILES.in: New file - list of files in opcodes directory
914 that should be scan for internationalisation macros.
915 * po/opcodes.pot: New file - list of internationisation strings
916 found in files mentioned in po/POTFILES.in.
917 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
918 entry. Add intl directory to include paths.
919 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
920 HAVE_STRCPY, HAVE_LC_MESSAGES
921 * configure.in: Add rule to build Makefile in po subdirectory.
922 * Makefile.in: Rebuilt.
923 * aclocal.m4: Rebuilt.
924 * config.in: Rebuilt.
925 * configure: Rebuilt.
926 * alpha-opc.c: Internationalised.
927 * arc-dis.c: Internationalised.
928 * arc-opc.c: Internationalised.
929 * arm-dis.c: Internationalised.
930 * cgen-asm.c: Internationalised.
931 * d30v-dis.c: Internationalised.
932 * dis-buf.c: Internationalised.
934 * dvp-dis.c: Internationalised.
935 * dvp-opc.c: Internationalised.
937 * h8300-dis.c: Internationalised.
938 * h8500-dis.c: Internationalised.
939 * i386-dis.c: Internationalised.
940 * m10200-dis.c: Internationalised.
941 * m10300-dis.c: Internationalised.
942 * m68k-dis.c: Internationalised.
943 * m88k-dis.c: Internationalised.
944 * mips-dis.c: Internationalised.
945 * ns32k-dis.c: Internationalised.
946 * opintl.h: Internationalised.
947 * ppc-opc.c: Internationalised.
948 * sparc-dis.c: Internationalised.
949 * v850-dis.c: Internationalised.
950 * v850-opc.c: Internationalised.
952 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
954 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
955 (asm_hash_table_entries): New variable.
956 (cgen_asm_init): Free asm_hash_table_entries.
957 (hash_insn_array,hash_insn_list): New functions.
958 (build_asm_hash_table): Use them. Hash macro insns as well.
959 (cgen_asm_lookup_insn): Update.
960 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
961 (dis_hash_table_entries): New variable.
962 (cgen_dis_init): Free dis_hash_table_entries.
963 (hash_insn_array,hash_insn_list): New functions.
964 (build_dis_hash_table): Use them. Hash macro insns as well.
965 (cgen_dis_lookup_insn): Update.
966 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
967 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
968 (cgen_macro_insn_count): New function.
969 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
970 All callers updated. Sanity check result of extract fn.
971 (@arch@_cgen_get_insn_operands): Change result type to void.
972 Delete args insn_value, length. New arg fields. All callers updated.
973 (@arch@_cgen_lookup_get_insn_operands): New function.
974 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
976 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
978 * i386-dis.c (OP_DSSI): Print segment override.
981 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
983 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
987 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
989 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
993 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
995 * vu0.h (vlqd, vlqi): Update per revised specs.
999 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
1001 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
1002 (vif_operands): Update.
1003 (vif_get_unpackloc): Delete.
1004 (state_vif_unpackloc{,_star_p}): Delete.
1005 (dvp_opcode_init_parse): Update.
1006 (vif_unpack_len_value): Avoid divide by zero.
1009 start-sanitize-r5900
1010 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
1012 * vu0.h: Specs changed for VCALLMSR bit pattern.
1013 * mips-dis.c: (print_insn_arg) Matching change.
1016 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
1018 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
1021 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
1023 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
1024 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
1025 * configure.in: Define and substitute WIN32LDFLAGS and
1027 * aclocal.m4: Rebuild with new libtool.
1028 * configure, Makefile.in: Rebuild.
1030 start-sanitize-r5900
1031 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
1033 * vu0.h: Corrected bit pattern for VMAXI opcode.
1036 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
1038 * m32r-opc.c: Regenerate.
1041 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
1043 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
1044 (dvp_expand_macro): Implement.
1045 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
1046 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
1049 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
1051 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
1052 before trying to copy it.
1053 * Makefile.in: Rebuild.
1055 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
1057 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
1059 start-sanitize-m32rx
1060 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
1062 * m32r-opc.c: Fix bit patterns for SAT and SATB.
1065 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
1067 * ns32k-dis.c (bit_extract_simple): New function to extract bits
1068 from an arbitrary valid buffer instead of fetching them on demand
1070 (invalid_float): use bit_extract_simple() instead of bit_extract().
1072 start-sanitize-m32rx
1073 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
1075 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
1076 * m32r-opc.h: Add extra control registers.
1079 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
1081 From H.J. Lu <hjl@gnu.org>:
1082 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
1085 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
1087 * Branched binutils 2.9.
1089 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
1091 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
1092 disassembling last 4 bytes of a section.
1094 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
1096 Fix some gcc -Wall warnings:
1097 * arc-dis.c (print_insn): Add casts to avoid warnings.
1098 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
1099 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1101 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
1102 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
1103 (parse_bc, parse_vfreg, parse_accdest): Likewise.
1104 (parse_ffstreg, parse_vif_mode): Likewise.
1106 * m10200-dis.c (disassemble): Likewise.
1107 * m10300-dis.c (disassemble): Likewise.
1108 * ns32k-dis.c (print_insn_ns32k): Likewise.
1109 * ppc-opc.c (insert_ral, insert_ram): Likewise.
1110 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
1111 * cgen-opc.c (cgen_keyword_search_next): Likewise.
1112 * d10v-dis.c (dis_long, dis_2_short): Likewise.
1113 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
1115 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
1116 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
1117 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
1119 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
1120 start-sanitize-tic80
1121 * tic80-dis.c (print_one_instruction): Likewise.
1123 * w65-dis.c (print_operand): Likewise.
1124 * z8k-dis.c (fetch_data): Likewise.
1125 * a29k-dis.c: Add return type for find_byte_func_type.
1126 * arc-opc.c: Include <stdio.h>. Remove declarations of
1127 insert_multshift and extract_multshift.
1128 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
1130 (extract_value): Fully parenthesize expression.
1132 * dvp-opc.c: Include <ctype.h>.
1133 (print_sdest): Add default case to switch.
1135 * h8500-dis.c (print_insn_h8500): Initialize local variables.
1136 * h8500-opc.h (h8500_table): Fully bracket initializer.
1137 * w65-opc.h (optable): Likewise.
1138 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
1139 * i386-dis.c (OP_E): Initialize local variables.
1140 * m10200-dis.c (print_insn_mn10200): Likewise.
1141 * mips-dis.c (print_insn_mips16): Likewise.
1142 * sh-dis.c (print_insn_shx): Likewise.
1143 * v850-dis.c (print_insn_v850): Likewise.
1144 * ns32k-dis.c (print_insn_arg): Declare.
1145 (get_displacement, invalid_float): Declare.
1146 (list_search, sign_extend, flip_bytes): Declare return type.
1147 (get_displacement): Likewise.
1148 (print_insn_arg): Likewise. Make d int. Fix sprintf format
1150 (print_insn_ns32k): Make i unsigned.
1151 (invalid_float): Make static. Declare type of val.
1152 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
1153 on each for iteration.
1154 * tic30-dis.c (get_indirect_operand): Likewise.
1155 * z8k-dis.c (print_insn_z8001): Declare return type.
1156 (print_insn_z8002): Likewise.
1157 (unparse_instr): Fix sprintf format strings.
1159 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
1161 * mips-opc.c: Add "sync.l" and "sync.p".
1164 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
1166 * dvp-opc.c (extract_vif_datalen): Rewrite.
1167 (vif_insn_len): Perform 0->max+1 conversion for direct length.
1169 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
1171 * dvp-dis.c (print_insn): Print unpack address in hex.
1172 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
1173 Don't skip over '*', just record it.
1174 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
1175 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
1176 Don't skip over '*', just record it.
1177 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
1178 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
1179 (vif_opcodes): Likewise.
1180 (state_vif_{mpg,unpack}loc_star_p): New static locals.
1181 (vif_macros,vif_macro_count): New globals.
1182 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
1183 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
1184 (vif_get_wl_cl): New function.
1185 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
1188 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1190 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
1191 default m68k variant to recognize.
1193 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
1194 (ctrl, cobr, mem, ea): Likewise.
1195 (print_addr): Likewise. Remove cast.
1196 (ea): Cast argument of print_addr to bfd_vma.
1198 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
1200 (cgen_parse_unsigned_integer): Likewise.
1201 (cgen_parse_address): Likewise.
1203 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
1205 * i960-dis.c (ctrl): Add full braces to structure initialization.
1206 (cobr, mem, reg): Likewise.
1207 (ea): Correct parenthesization in expression.
1209 * cgen-asm.c: Include <ctype.h>.
1210 (build_asm_hash_table): Remove unused local variable i.
1211 (cgen_parse_keyword): Add casts to avoid warnings.
1213 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
1214 symbol. Fix indentation.
1215 (print_insn_little_arm): Likewise.
1217 start-sanitize-r5900
1218 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
1220 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
1224 start-sanitize-m32rx
1225 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
1227 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
1232 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
1234 * dvp-opc.c (vif_operand_datalen_special): New global.
1237 start-sanitize-r5900
1238 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
1240 * vu0.h (vcallms): Use 'O' for call target operand.
1241 * mips-dis.c (print_insn_arg): Handle 'O'.
1244 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
1246 * configure.in: Use AM_DISABLE_SHARED.
1247 * aclocal.m4, configure: Rebuild with libtool 1.2.
1249 start-sanitize-r5900
1250 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
1252 * mips-dis.c: Change '%' to '#' in r5900 support.
1256 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1258 These patches are courtesy of Jonathan Walton and Tony Thompson
1259 (athompso@cambridge.arm.com).
1261 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1264 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1265 both the offset and the label closest to the destination.
1267 start-sanitize-r5900
1268 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1270 * vu0.h: New file with cop2/vu0 instructions.
1271 * mips-opc.c: Include vu0.h.
1272 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1274 (print_insn_mips): Do not emit a tab after an instruction if the
1275 first arg is an instruction completer (&). If the next arg is an
1276 escape character (%), then print the next arg verbatim.
1277 * Makefile.am (mips-opc.lo): Depend on vu0.h
1281 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1283 * dvp-opc.c (vif_opcodes): Add stcycl.
1285 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1287 * dvp-dis.c (print_dma): Change length from 16 to 8.
1290 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1292 * m32r-opc.h: Regenerate.
1295 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1297 * dvp-opc.c (print_dest1): Print dest spec again.
1298 (print_vfreg,print_accdest): Likewise.
1299 (vif_unpack_len): Round result up to word boundary.
1302 start-sanitize-vr4320
1303 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1305 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1307 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1309 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1314 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1316 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1317 (print_insn): Do mask comparison on proper opcode word.
1318 Print unsigned values in hex.
1319 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1320 (parse_bc): Catch missing dest.
1321 (parse_vfreg): Replace atoi call with strtol.
1322 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1323 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1324 (extract_gif_eop): New function.
1325 (gif_operands): Update eop entry.
1326 (VGIFOP,VGIFNREGS): Fix calcs.
1327 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1328 (gif_regs): Add entry for unused 11 case.
1329 (print_gif_regs): Print empty list instead of nothing.
1330 (extract_gif_nloop): Fix value calc.
1331 (print_gif_nloop): Always print value, even if 0.
1332 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1333 (vif_operands): Use them for wl,cl fields.
1334 (state_vif_wl,state_vif_cl): New static locals.
1335 (parse_vif_mode): Handle numeric args.
1336 (vif_unpack_len_value,vif_unpack_len): New functions.
1337 (vif_insn_len): Call vif_unpack_len.
1340 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1342 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1344 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1346 * cgen-asm.in: Move insertion of generated routines to top of file.
1347 (insert_normal): Add prototype. Delete `shift' arg.
1348 * cgen-dis.in: Move insertion of generated routines to top of file.
1349 (extract_normal): Add prototype. Delete `shift' arg.
1350 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1351 (print_keyword): Add prototype. Fix type of `attrs' arg.
1353 start-sanitize-vr4320
1354 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1356 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1357 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1360 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1362 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1363 assume that info->symbols is non-empty.
1365 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1367 * alpha-opc.c (cvtqs) There is no such thing.
1368 (cvttq): Missing most of the /*d variants.
1370 start-sanitize-r5900
1371 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1373 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1375 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1376 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1379 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1381 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1382 delayed branches or jumps.
1385 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1387 * dvp-opc.c (vif_operands): Add unpack[u] support.
1388 (vif_opcodes): Ditto.
1389 (*_vif_imrubits): Renamed from *_vif_imrbits.
1391 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1393 * dvp-dis.c (print_insn): Handle word number.
1394 Handle mips address vs vu address.
1395 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1396 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1397 ({insert,extract}_dma_addr): Fix word ofset.
1398 ({insert,print}_gif_regs): Fix encode/decode.
1401 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1403 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1405 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1406 * tic30-dis.c (print_branch): Likewise.
1408 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1409 * dvp-dis.c (dvp_info_mach_type): New function.
1410 (print_insn_dvp): Call it.
1411 (print_vif): Return length of 4 if mpg or direct insn so following
1412 insns get properly disabled.
1413 (print_gif): Fix word order.
1414 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1415 (gif_operands): Fix word order.
1416 (gif_opcodes): Likewise.
1417 ({insert,extract,print}_gif_regs): Likewise.
1418 (gif_regs): Add new register number/name changes.
1419 (dma_opcodes): Add dmarefe insn.
1422 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1424 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1425 saved_symbol code as it is no longer needed.
1427 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1429 * cgen-asm.c: Include symcat.h.
1430 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1432 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1435 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1437 * dvp-opc.c (extra_dma_flags): Fix typos.
1438 (dma_operands): Fix word numbers.
1439 (dma_opcodes): Likewise.
1440 ({insert,extract}_dma_flags): Likewise.
1443 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1445 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1448 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1450 * dvp-dis.c (print_gif): Complete.
1451 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1452 (state_gif_{nregs,regs,nloop}): New static locals.
1453 (*_gif_*): Complete.
1454 (dvp_opcode_init_{parse,print}): Init gif state locals.
1455 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1456 (vif_insn_len): Handle `unpack'.
1457 ({insert,extract}_dma_flags): Complete.
1460 start-sanitize-r5900
1461 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1463 * mips-opc.c (mula.s): Renamed from multa.s.
1466 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1468 * m32r-opc.[ch]: Regenerate.
1471 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1473 * dvp-opc.c (dma_operands): Rewrite.
1474 (dma_operand_{count,addr}): New globals.
1475 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1476 (insert_dma_addr): Insert value into insn.
1477 (extract_dma_addr): Extract value from insn.
1479 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1481 * dvp-dis.c (print_vu): Handle loi insns.
1482 (print_insn): Likewise.
1483 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1484 (vu_operands): Make LDEST1 a FAKE operand.
1485 (parse_dest1): Allow elided argument.
1486 (print_dest1): Don't print the argument.
1488 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1490 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1491 (print_vfreg): Don't print dest spec.
1492 (parse_accdest): Dest spec is optional.
1493 (print_accdest): Don't print dest spec.
1496 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1498 * Makefile.am (CGENFILES): Update.
1499 * Makefile.in: Regenerate.
1500 * cgen-asm.in (insert_normal): Result is error message now.
1501 Validate value to be inserted.
1502 (insert_insn_normal): Result is error message now.
1503 (@arch@_cgen_assemble_insn): Update.
1504 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1505 arguments. Don't perform validation here.
1506 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1508 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1510 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1511 operand instance list.
1512 * m32r-opc.c: Regenerate.
1514 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1516 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1517 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1519 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1521 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1523 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1525 * configure.in: Get the version number from BFD.
1526 * configure: Rebuild.
1528 From H.J. Lu <hjl@gnu.org>:
1529 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1530 * Makefile.in: Rebuild.
1532 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1534 * m32r-opc.c: Regenerate.
1535 * m32r-opc.h: Regenerate.
1537 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1539 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1540 Ignore ALIAS insns if asked to.
1541 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1542 * m32r-opc.c: Regenerate.
1545 * dvp.opc.c: Nicely format opcode tables.
1546 (vu_operands): New element UFLAGS.
1547 (parse_uflags,print_uflags): New functions.
1548 (vu_upper_opcodes): Add UFLAGS to all insns.
1551 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1553 Fix rac to accept only a0:
1554 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1555 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1556 Introduce OPERAND_GPR.
1557 * d10v-dis.c (print_operand): Likewise.
1559 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1561 * cgen-opc.in: New file.
1562 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1563 * Makefile.am (CGENFILES): Add cgen-opc.in.
1564 * Makefile.in: Regenerate.
1566 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1567 (cgen_hw_lookup): Make result const.
1569 * cgen-dis.in (*): Use PTR instead of void *.
1570 (print_insn): Delete unused vars `i', `syntax'.
1572 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1575 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1577 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1578 (vif_opcodes): Update renamed insns.
1579 * dvp-dis.c (*): Likewise.
1582 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1584 * configure, aclocal.m4: Rebuild with new libtool.
1586 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1588 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1589 instructions use a PC relative branch, not absolute.
1591 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1593 * configure.in: Set libtool_enable_shared rather than
1594 libtool_shared. Remove diversion hack.
1595 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1597 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1599 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1600 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1602 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1604 * tic30-dis.c: New file.
1605 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1606 * configure.in: Handle bfd_tic30_arch.
1607 * Makefile.am: Rebuild dependencies.
1608 (CFILES): Add tic30-dis.c
1609 (ALL_MACHINES): Add tic30-dis.lo.
1610 * configure, Makefile.in: Rebuild.
1612 start-sanitize-m32rx
1613 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1615 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1616 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1617 macwhi-a and macwlo-a instructions.
1621 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1623 * dvp-opc.c, fixed encoding of a bunch of instructions to
1624 be consistent with the asmvu assembler (and inconsistent
1625 with the specification).
1627 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1629 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1630 in the opcode table. The pkemscalf instruction must come first.
1632 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1634 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1637 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1639 * m32r-opc.h (HAVE_CPU_M32R): Define.
1642 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1644 * dvp-dis.c, dvp-opc.c: New files.
1645 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1646 * configure: Regenerate.
1647 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1648 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1649 (mips-dis.lo): Compile with @archdefs@.
1650 * Makefile.in: Regenerate.
1651 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1652 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1655 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1657 * v850-opc.c (insertion routines): If both alignment and size is
1658 wrong then report this.
1660 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1662 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1663 Only recognize instructions for the current target_processor.
1665 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1667 * d10v-dis.c (PC_MASK): Correct value.
1668 (print_operand): If there's a reloc, don't calculate the
1669 address because they could be in different sections.
1671 start-sanitize-cygnus
1672 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1674 * cgen.sh: Rewrite to be like simulator's version.
1675 * Makefile.am (cgen): Update call to cgen.sh.
1676 * Makefile.in: Regenerate
1679 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1681 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1682 instruction after the 4650's "mul" instruction; nobody's using the
1683 4010 these days. If object files someday indicate which processor
1684 variant they're intended for, we can do a better job at this.
1686 start-sanitize-r5900
1687 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1689 * mips-opc.c (c.lt.s): Add r5900 variant.
1693 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1695 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1696 table provided entry size. Use CGEN_INSN_MNEMONIC.
1697 (cgen_parse_keyword): Rewrite.
1698 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1699 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1700 * cgen-opc.c: Clean up pass over `struct foo' usage.
1701 (cgen_keyword_lookup_value): Handle "" entry.
1702 (cgen_keyword_add): Likewise.
1703 start-sanitize-cygnus
1704 * Makefile.am: Add cgen support.
1705 * Makefile.in: Regenerate.
1706 * configure.in: Add cgen support.
1707 * configure: Regenerate.
1708 * aclocal.m4: Regenerate.
1709 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1712 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1714 * mips-opc.c: Add FP_D to s.d instruction flags.
1716 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1718 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1720 start-sanitize-tic80
1721 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1723 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1724 PC relative offset forms before the 15 bit forms. An assembler command
1725 line option now chooses the default.
1728 start-sanitize-r5900
1729 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1731 * mips-opc.c: Add many missing r5900 instructions.
1734 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1736 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1737 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1739 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1741 * configure: Only build libopcodes shared if --enable-shared's value
1742 was `yes', or was set to `*opcodes*'.
1743 * aclocal.m4: Likewise.
1744 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1745 original source of this bit of code. It's not clear what the best fix
1748 start-sanitize-r5900
1749 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1751 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1753 start-sanitize-tic80
1754 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1756 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1757 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1758 offset forms before the 15 bit forms, to default to the long forms.
1761 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1763 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1765 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1767 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1768 symbol if none is present.
1769 (print_insn_big_arm): Prevent examination of stored symbol if
1772 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1774 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1776 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1778 * disassemble.c: Remove disasm_symaddr() function.
1780 * arm-dis.c: Use info->symbol instead of info->flags to determine
1781 if disassmbly should be in Thumb or Arm mode.
1783 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1785 * arm-dis.c: Add support for disassembling Thumb opcodes.
1786 (print_insn_thumb): New function.
1788 * disassemble.c (disasm_symaddr): New function.
1790 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1791 (thumb_opcodes): Table of Thumb opcodes.
1793 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1795 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1797 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1798 and 'v' as operand types.
1800 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1802 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1803 <olivier.carmona@di.epfl.ch>.
1804 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1805 which has a two word opcode with a one word argument.
1807 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1809 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1810 unsigned, not signed.
1811 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1813 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1815 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1816 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1817 (ftrv): Slay the cut-and-paste monster.
1819 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1821 * d10v-dis.c (print_operand):
1822 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1824 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1826 * d10v-opc.c (OPERAND_FLAG): Split into:
1827 (OPERAND_FFLAG, OPERAND_CFLAG) .
1831 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1833 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1834 field for all INSN_MACRO's.
1835 * mips16-opc.c: same
1837 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1839 * mips-opc.c (sync,cache): These are 3900 insns.
1841 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1843 sh-opc.h (sh_table): Remove ftst/nan.
1845 start-sanitize-cygnus
1846 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1848 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1849 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1851 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1855 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1857 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1858 Add tx49 insns and configury.
1861 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1863 * mips-opc.c (ffc, ffs): Fix mask.
1865 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1867 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1870 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1872 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1873 start-sanitize-cygnus
1874 Added VR5400 instructions.
1875 (N5): New cpu-id macro.
1877 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1879 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1881 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1882 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1884 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1886 * v850-dis.c (disassemble): Replace // with /* ... */
1888 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1890 * sparc-opc.c: Add wr & rd for v9a asr's.
1891 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1892 (v9a_asr_reg_names): New variable.
1893 Patch from David Miller <davem@vger.rutgers.edu>.
1895 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1897 * sparc-opc.c (v9notv9a): New insn type.
1898 (IMPDEP): Move to the end to not conflict with edge8 et al.
1899 Patch from David Miller <davem@vger.rutgers.edu>.
1901 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1903 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1905 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1907 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1909 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1911 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1912 of disassemble_info structure to determine if an overlay address
1913 has a matching symbol in low memory.
1915 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1916 new symbol_at_address_func field in disassemble_info structure.
1918 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1920 * v850-opc.c (extract_d22): Use signed arithmatic.
1922 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1924 * mips-opc.c: Three op mult is not an ISA insn.
1926 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1928 * mips-opc.c: Fix formatting.
1930 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1932 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1933 than assuming that char is signed. Explicitly sign extend 16 bit
1934 values, rather than assuming that short is 16 bits.
1935 (OP_sI, OP_J, OP_DIR): Likewise.
1937 start-sanitize-v850e
1938 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1940 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1944 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1946 * v850-opc.c: Fix typo in comment.
1948 * v850-dis.c (disassemble): Add test of processor type when
1949 determining opcodes.
1951 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1953 * configure.in: Use a diversion to set enable_shared before the
1954 arguments are parsed.
1955 * configure: Rebuild.
1957 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1959 * m68k-opc.c (TBL1): Use ! rather than `.
1960 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1962 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1964 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1966 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1968 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1971 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1972 * aclocal.m4: Rebuild with new libtool.
1973 * configure: Rebuild.
1975 start-sanitize-v850e
1976 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1978 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1981 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1983 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1985 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1987 * v850-opc.c (v850_opcodes): Further rearrangements.
1989 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1991 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1993 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1995 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1998 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
2000 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
2002 * mips16-opc.c: Added mips16 sdbbp.
2005 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
2007 * v850-opc.c: Initialise processors field of v850_opcode structure.
2009 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
2011 Merge changes from Martin Hunt:
2013 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
2015 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
2016 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
2017 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
2019 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
2021 * d30v-dis.c (print_insn): First operand of d*i (delayed
2022 branch) instructions is relative.
2024 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
2025 (d30v_operand_table): Add IMM6S3 type.
2026 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
2028 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
2029 and cmp instructions.
2031 * d30v-opc.c: Correct entries for repeat*, and sat*.
2032 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
2033 types. Correct several formats.
2035 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
2037 * d30v-opc.c (pre_defined_registers): Change control registers.
2039 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
2040 SHORT_C2. Manual was incorrect.
2042 * d30v-dis.c (lookup_opcode): Return value now indicates
2043 if an opcode has a short and a long form. Used for deciding
2044 to append a ".s" or ".l".
2045 (print_insn): Append a ".s" to an instruction if it is
2046 the short form and ".l" if it is a long form. Do not append
2047 anything if the instruction has only one possible size.
2049 * d30v-opc.c: Change mulx2h to require an even register.
2050 New form: SHORT_A2; a SHORT_A form that needs an even
2051 register as the first operand.
2053 * d30v-dis.c (print_insn_d30v): Fix problem where the last
2054 instruction was not being disassembled if there were an odd
2055 number of instructions.
2057 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
2059 start-sanitize-v850e
2060 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
2062 * v850-dis.c (disassemble): Improved display of register lists.
2065 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
2067 * sparc-opc.c (sparc_opcodes): Fix assembler args to
2068 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
2069 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
2070 fandnot1s, fandnot2s.
2072 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
2074 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
2076 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
2078 * cgen-asm.c (cgen_parse_address): New argument resultp.
2079 All callers updated.
2080 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
2082 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
2084 * mn10200-dis.c (disassemble): PC relative instructions are
2085 relative to the next instruction, not the current instruction.
2087 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
2089 * v850-dis.c (disassemble): Only signed extend values that are not
2090 returned by extract functions.
2091 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
2093 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
2095 * v850-opc.c: Update comments. Remove use of
2096 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
2098 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
2100 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
2102 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
2104 * configure: Rebuilt with latest devo autoconf for NT support.
2106 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
2108 * v850-dis.c (disassemble): Use curly brace syntax for register
2111 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
2112 where r0 is being used as a destination register.
2114 start-sanitize-v850e
2115 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
2117 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
2120 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
2122 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
2123 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
2124 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
2125 Add insns to access SGR and DBR.
2126 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
2128 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
2130 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
2132 start-sanitize-v850e
2133 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
2135 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
2136 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
2139 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2141 * configure (cgen_files): Add support for v850e target.
2142 * configure.in (cgen_files): Add support for v850e target.
2144 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
2146 * configure (cgen_files): Add support for v850ea target.
2147 * configure.in (cgen_files): Add support for v850ea target.
2150 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
2152 * configure.in (bfd_arc_arch): Add.
2153 * configure: Rebuild.
2154 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
2155 * Makefile.in: Rebuild.
2156 * arc-dis.c, arc-opc.c: New files.
2157 * disassemble.c (ARCH_all): Define ARCH_arc.
2158 (disassembler): Add ARC support.
2160 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
2162 start-sanitize-v850e
2163 * v850-dis.c (disassemble): Add support for v850EA instructions.
2165 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
2166 (v850_opcodes): Add v850EA instructions.
2168 * v850-dis.c (disassemble): Add support for v850E instructions.
2170 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
2171 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
2172 insert_spe, extract_spe): New Functions.
2173 (v850_opcodes): Add v850E instructions.
2176 * v850-opc.c: Reorganised and re-layed out to improve readability
2179 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
2181 * configure: Rebuild with autoconf 2.12.1.
2183 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
2185 * aclocal.m4, configure: Rebuild with new automake patches.
2187 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
2189 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
2190 * acinclude.m4: Just include acinclude.m4 from BFD.
2191 * aclocal.m4, configure: Rebuild.
2193 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
2195 * Makefile.am: New file, based on old Makefile.in.
2196 * acconfig.h: New file.
2197 * acinclude.m4: New file.
2198 * stamp-h.in: New file.
2199 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
2200 Removed shared library handling; now handled by libtool. Replace
2201 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
2202 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
2203 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
2204 handling in AC_OUTPUT.
2205 * dep-in.sed: Change .o to .lo.
2206 * Makefile.in: Now built with automake.
2207 * aclocal.m4: Now built with aclocal.
2208 * config.in, configure: Rebuild.
2210 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
2212 * mips-opc.c: Fix typo/thinko in "eret" instruction.
2214 start-sanitize-r5900
2215 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
2217 * mips-opc.c: Fix coding of mtsa.
2220 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
2222 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
2224 * sparc-dis.c (sorted_opcodes): New static local.
2225 (struct opcode_hash): `opcode' is pointer to const element.
2226 (build_hash): First arg is now table of sorted pointers.
2227 (print_insn_sparc): Sort opcodes by sorting table of pointers.
2228 (compare_opcodes): Update.
2230 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
2232 * cgen-opc.c: #include <ctype.h>.
2233 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
2234 Handle case insensitive hashing.
2235 (hash_keyword_value): Change type of `value' to unsigned int.
2237 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
2239 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
2240 precision FP, mark it as such. Likewise for double precision
2241 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
2243 start-sanitize-r5900
2244 (mips_builtin_opcodes): Remove non-existant r5900 instructions
2247 start-sanitize-r5900
2248 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
2250 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
2251 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2254 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2256 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2258 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2259 nesting depth when all the macros are expanded.
2261 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2263 * sparc-opc.c: The fcmp v9a instructions take an integer register
2264 as a destination, not a floating point register. From Christian
2265 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2267 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2269 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2270 syntax. From Roman Hodek
2271 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2273 * i386-dis.c (twobyte_has_modrm): Fix pand.
2275 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2277 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2279 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2281 * arm-dis.c: Add prototypes for arm_decode_shift and
2284 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2286 * mips-opc.c: Add r3900 insns.
2288 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2290 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2291 print delay slot instructions on the same line. When using a PC
2292 relative load, add a comment with the value being loaded if it can
2295 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2297 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2298 to pushS/popS for segment regs and byte constant so that
2299 pushw/popw printed when in 16 bit data mode.
2301 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2302 print cbtw, cwtd in 16 bit data mode.
2303 * i386-dis.c (putop): extra case W to support above.
2305 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2306 address size prefix in 16 bit address mode.
2308 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2310 * sh-dis.c: Reindent. Rename local variable fprintf to
2313 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2315 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2317 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2319 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2321 * mips16-opc.c (mip16_opcodes): same.
2323 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2325 * m68k-opc.c (moveb): Change $d to %d.
2327 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2329 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2330 (twobyte_has_modrm): Likewise.
2332 (OP_MMX, OP_EM, OP_MS): New static functions.
2334 * i386-dis.c: Revert patch of April 4. The output now matches
2337 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2339 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2342 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2344 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2346 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2348 * Makefile.in (install): Depend upon installdirs.
2349 (installdirs): New target.
2351 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2353 From Thomas Graichen <graichen@rzpd.de>:
2354 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2355 * configure: Rebuild.
2357 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2359 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2360 Delete string{,s}.h support.
2362 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2364 * cgen-asm.c (cgen_parse_operand_fn): New global.
2365 (cgen_parse_{{,un}signed_integer,address}): Update call to
2366 cgen_parse_operand_fn.
2367 (cgen_init_parse_operand): New function.
2368 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2369 from cgen_asm_init_parse.
2370 (m32r_cgen_assemble_insn): New operand `errmsg'.
2371 Delete call to as_bad, return error message to caller.
2372 (m32r_cgen_asm_hash_keywords): #if 0 out.
2374 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2376 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2378 [case 'J']: Fix typo in register name.
2380 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2382 * configure.in: Substitute SHLIB_LIBS.
2383 * configure: Rebuild.
2384 * Makefile.in (SHLIB_LIBS): New variable.
2385 ($(SHLIB)): Use $(SHLIB_LIBS).
2387 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2389 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2391 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2393 * disassemble.c (disassembler): Handle m32r.
2395 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2397 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2398 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2399 * Makefile.in (CFILES): Add them.
2400 (ALL_MACHINES): Add them.
2401 (dependencies): Regenerate.
2402 * configure.in (cgen_files): New variable.
2403 (bfd_m32r_arch): Add entry.
2404 * configure: Regenerate.
2406 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2408 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2409 * configure: Rebuild.
2411 * Makefile.in: Rebuild dependencies.
2413 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2415 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2418 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2420 * Branched binutils 2.8.
2422 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2424 * m10200-dis.c: Rename from mn10200-dis.c.
2425 * m10200-opc.c: Rename from mn10200-opc.c.
2426 * m10300-dis.c: Rename from mn10300-dis.c
2427 * m10300-opc.c: Rename from mn10300-opc.c.
2428 * Makefile.in: Update accordingly.
2430 * mips16-opc.c: Add mul and dmul macros.
2432 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2434 * makefile.vms: Update CFLAGS, add clean target.
2436 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2438 * mips-opc.c: Add "wait". From Ralf Baechle
2439 <ralf@gnu.ai.mit.edu>.
2441 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2442 * configure, config.in: Rebuild.
2443 * sysdep.h: Include <stdlib.h> if it exists.
2444 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2446 * Makefile.in: Rebuild dependencies.
2448 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2450 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2451 Andrew Bray <andy@madhouse.demon.co.uk>.
2453 * mips-opc.c: Add cast when setting mips_opcodes.
2455 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2457 * v850-dis.c (disassemble): Fix sign extension problem.
2458 * v850-opc.c (extract_d*): Fix sign extension problems to make
2459 disassembly calculate branch offsets correctly.
2461 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2463 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2465 * mips-opc.c: Add dctr and dctw.
2467 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2469 * d30v-dis.c (print_insn): Change the way signed constants
2472 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2474 * Makefile.in (BFD_H): New variable.
2475 (HFILES): New variable.
2476 (CFILES): Add all C files.
2477 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2478 Delete old dependencies, and build new ones.
2479 * dep-in.sed: New file.
2481 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2483 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2485 start-sanitize-coldfire
2486 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2488 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2491 end-sanitize-coldfire
2492 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2494 * mn10200-opc.c: Change "trap" to "syscall".
2495 * mn10300-opc.c: Add new "syscall" instruction.
2497 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2499 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2500 mulul insns on the coldfire.
2502 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2504 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2505 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2506 (print_insn_little_arm): Likewise.
2508 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2510 Based on patches from H.J. Lu <hjl@lucon.org>:
2511 * i386-dis.c (fetch_data): Add prototype.
2512 * m68k-dis.c (fetch_data): Add prototype.
2513 (dummy_print_address): Add prototype. Make static.
2514 * ppc-opc.c (valid_bo): Add prototype.
2515 * sparc-dis.c (build_hash_table): Add prototype.
2516 (is_delayed_branch, compute_arch_mask): Add prototypes.
2517 (print_insn_sparc): Make several local variables const.
2518 (compare_opcodes): Change arguments to const PTR. Add prototype.
2519 * sparc-opc.c (arg): Change name field to be const.
2520 (lookup_name, lookup_value): Add prototypes. Change table and
2521 name parameters to be const.
2522 (sparc_encode_asi): Change name parameter to be const.
2523 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2524 (sparc_encode_sparclet_cpreg): Likewise.
2525 (sparc_decode_asi): Change return type to be const.
2526 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2527 (sparc_decode_sparclet_cpreg): Likewise.
2529 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2531 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2532 Solaris doesn't like the combined options, and the -f is
2534 (stamp-tshlink, install): Likewise.
2536 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2538 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2541 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2543 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2545 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2547 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2550 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2552 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2554 start-sanitize-tic80
2555 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2557 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2559 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2561 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2564 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2566 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2567 floatformat_to_double to make portable.
2568 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2571 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2573 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2574 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2576 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2578 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2579 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2581 start-sanitize-tic80
2582 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2584 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2585 (OFF_SL_BR_SCALED): ... to this, and added the flag
2586 TIC80_OPERAND_BASEREL to the flags word.
2587 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2591 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2593 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2594 Change mips_opcodes from const array to a pointer,
2595 and change bfd_mips_num_opcodes from const int to int,
2596 so that we can increase the size of the mips opcodes table
2599 start-sanitize-tic80
2600 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2602 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2603 store BITNUM values in the table in one's complement form
2604 to match behavior when assembler is given a raw numeric
2605 value for a BITNUM operand.
2606 * tic80-dis.c (print_operand_bitnum): Ditto.
2609 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2611 * d30v-opc.c: Removed references to FLAG_X.
2613 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2615 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2617 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2619 * Makefile.in: Added d30v object files.
2620 * configure: (bfd_d30v_arch) Rebuilt.
2621 * configure.in: (bfd_d30v_arch) Added new case.
2622 * d30v-dis.c: New file.
2623 * d30v-opc.c: New file.
2624 * disassemble.c (disassembler) Add entry for d30v.
2626 start-sanitize-tic80
2627 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2629 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2630 representations for the floating point BITNUM values.
2632 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2634 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2635 in the table in one's complement form, as they appear in the
2637 (tic80_symbol_to_value): Use macros to access predefined
2639 (tic80_value_to_symbol): Ditto.
2640 (tic80_next_predefined_symbol): New function.
2641 * tic80-dis.c (print_operand_bitnum): Remove code that did
2642 one's complement for BITNUM values.
2645 start-sanitize-r5900
2646 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2648 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2651 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2653 * makefile.vms: Remove 8 bit characters. Update to latest
2656 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2658 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2660 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2662 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2663 (IMM24_PCREL): Likewise.
2665 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2667 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2668 address for an extended PC relative instruction that is not a
2671 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2673 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2676 start-sanitize-tic80
2677 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2679 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2680 (tic80_opcodes): Sort entries so that long immediate forms
2681 come after short immediate forms, making it easier for
2682 assembler to select the right one for a given operand.
2685 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2687 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2689 (print_insn_mips16): Likewise.
2691 start-sanitize-r5900
2692 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2694 * mips-opc.c: add r5900.
2697 start-sanitize-tic80
2698 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2700 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2701 a symbol class that restricts translation to just that
2702 class (general register, condition code, etc).
2704 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2706 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2707 and REG_DEST_E for register operands that have to be
2708 an even numbered register. Add REG_FPA for operands that
2709 are one of the floating point accumulator registers.
2710 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2711 (tic80_opcodes): Change entries that need even numbered
2712 register operands to use the new operand table entries.
2713 Add "or" entries that are identical to "or.tt" entries.
2716 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2718 * mips16-opc.c: Add new cases of exit instruction for
2720 * mips-dis.c (print_mips16_insn_arg): Display floating point
2721 registers in operands of exit instruction. Print `$' before
2722 register names in operands of entry and exit instructions.
2724 start-sanitize-tic80
2725 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2727 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2728 pairs for all predefined symbols recognized by the assembler.
2729 Also used by the disassembling routines.
2730 (tic80_symbol_to_value): New function.
2731 (tic80_value_to_symbol): New function.
2732 * tic80-dis.c (print_operand_control_register,
2733 print_operand_condition_code, print_operand_bitnum):
2734 Remove private tables and use tic80_value_to_symbol function.
2737 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2739 * d10v-dis.c (print_operand): Change address printing
2740 to correctly handle PC wrapping. Fixes PR11490.
2742 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2744 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2747 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2749 * mips-dis.c (print_insn_mips16): Set insn_info information.
2750 (print_mips16_insn_arg): Likewise.
2752 * mips-dis.c (print_insn_mips16): Better handling of an extend
2753 opcode followed by an instruction which can not be extended.
2755 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2757 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2758 coldfire moveb instruction to not allow an address register as
2759 destination. Although the documentation does not indicate that
2760 this is invalid, experiments uncovered unexpected behavior.
2761 Added a comment explaining the situation. Thanks to Andreas
2762 Schwab for pointing this out to me.
2764 start-sanitize-tic80
2765 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2767 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2768 entries are presorted so that entries with the same mnemonic are
2769 adjacent to each other in the table. Sort the entries for each
2770 instruction so that this is true.
2773 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2775 * m68k-dis.c: Include <libiberty.h>.
2776 (print_insn_m68k): Sort the opcode table on the most significant
2777 nibble of the opcode.
2779 start-sanitize-tic80
2780 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2782 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2783 "vsub", "vst", "xnor", and "xor" instructions.
2784 (V_a1): Renamed from V_a, msb of accumulator reg number.
2785 (V_a0): Add macro, lsb of accumulator reg number.
2787 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2789 * tic80-dis.c (print_insn_tic80): Broke excessively long
2790 function up into several smaller ones and arranged for
2791 the instruction printing function to be callable recursively
2792 to print vector instructions that have both a load and a
2793 math instruction packed into a single opcode.
2794 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2795 to explain why it comes after the other vector opcodes.
2798 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2800 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2801 move insns to handle immediate operands.
2803 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2805 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2806 fix operand mask in the "moveml" entries for the coldfire.
2808 start-sanitize-tic80
2809 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2811 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2812 New macros for building vector instruction opcodes.
2813 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2814 FMT_LI, which were unused. The field is now a flags field.
2815 Remove some opcodes that are possible, but illegal, such
2816 as long immediate instructions with doubles for immediate
2817 values. Add "vadd" and "vld" instructions.
2819 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2821 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2822 the order more logical. Move the shift alias instructions ("rotl",
2823 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2824 interspersed with the regular sr.x and sl.x instructions. Add
2825 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2826 "sub", "subu", "swcr", and "trap".
2828 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2830 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2831 (OFF_SL_PC): Renamed from OFF_SL.
2832 (OFF_SS_BR): New operand type for base relative operand.
2833 (OFF_SL_BR): New operand type for base relative operand.
2834 (REG_BASE): New operand type for base register operand.
2835 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2836 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2837 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2839 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2840 10 char field, padded with spaces on rhs, rather than a string
2841 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2842 than old TIC80_OPERAND_RELATIVE. Add support for new
2843 TIC80_OPERAND_BASEREL flag bit.
2845 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2847 * tic80-dis.c (print_insn_tic80): Print floating point operands
2849 * tic80-opc.c (SPFI): Add single precision floating point
2850 immediate operand type.
2851 (ROTATE): Add rotate operand type for shifts.
2852 (ENDMASK): Add for shifts.
2853 (n): Macro for the 'n' bit.
2854 (i): Macro for the 'i' bit.
2855 (PD): Macro for the 'PD' field.
2856 (P2): Macro for the 'P2' field.
2857 (P1): Macro for the 'P1' field.
2858 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2862 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2864 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2865 adding in current address for pc-relative operands.
2867 start-sanitize-tic80
2868 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2870 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2871 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2872 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2873 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2874 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2875 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2876 (REG_SCALED, LSI_SCALED): New operand types.
2877 (E): New macro for 'E' bit at bit 27.
2878 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2879 opcodes, including the various size flavors (b,h,w,d) for
2880 the direct load and store instructions.
2882 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2884 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2886 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2887 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2888 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2889 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2890 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2891 masks with "MASK_* & ~M_*" to get the M bit reset.
2892 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2894 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2896 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2897 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2898 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2900 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2901 CC, SICR, and LICR table entries.
2902 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2903 "bcnd", and "brcr" opcodes.
2906 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2908 * ppc-opc.c (powerpc_operands): Make comment match the
2909 actual fields (no shift field).
2910 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2911 start-sanitize-tic80
2912 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2913 partial implementation, work in progress.
2914 * tic80-opc.c (tic80_operands): Begin construction operands table.
2915 (tic80_opcodes): Continue populating opcodes table and start
2916 filling in the operand indices.
2917 (tic80_num_opcodes): Add this.
2920 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2922 * m68k-opc.c: Add #B case for moveq.
2924 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2926 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2927 before they are used.
2929 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2931 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2932 for "breakpoint" instruction.
2934 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2936 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2937 (dep): Use ALL_CFLAGS rather than CFLAGS.
2939 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2941 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2944 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2946 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2947 start-sanitize-tic80
2948 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2951 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2953 * mips16-opc.c: Add "abs".
2955 start-sanitize-tic80
2956 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2958 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2959 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2960 (disassembler): Add bfd_arch_tic80 support to set disassemble
2961 to print_insn_tic80.
2962 * tic80-dis.c (print_insn_tic80): Add stub.
2964 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2966 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2967 * configure: Regenerate with autoconf.
2968 * tic80-dis.c: Add file.
2969 * tic80-opc.c: Add file.
2972 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2974 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2976 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2978 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2979 (mn10200_opcodes): Use it for some logicals and btst insns.
2980 Add "break" and "trap" instructions.
2982 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2984 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2986 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2988 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2989 relative load or add now depends upon whether the instruction is
2992 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2994 * mn10200-dis.c: Finish writing disassembler.
2995 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2996 Fix mask for "jmp (an)".
2998 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2999 handle endianness issues for mn10300.
3001 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
3003 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
3005 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
3006 instruction. Fix opcode field for "movb (imm24),dn".
3008 * mn10200-opc.c (mn10200_operands): Fix insertion position
3011 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
3013 * mn10200-opc.c: Create mn10200 opcode table.
3014 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
3015 but moving along nicely.
3017 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3019 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
3021 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
3023 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
3024 specifiers for fmovem* instructions.
3026 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3028 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
3030 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
3032 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
3035 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
3037 * mn10300-opc.c: Add some comments explaining the various
3040 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
3042 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3044 * m68k-dis.c (print_insn_arg): Handle new < and > operand
3047 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3048 operand specifiers in fmovm* instructions.
3050 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
3052 * ppc-opc.c (insert_li): Give an error if the offset has the two
3053 least significant bits set.
3055 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
3057 * mips-dis.c (print_insn_mips16): Separate the instruction from
3058 the arguments with a tab, not a space.
3060 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
3062 * mn10300-dis.c (disasemble): Finish conversion to '$' as
3065 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
3068 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
3070 * configure: Rebuild with autoconf 2.12.
3072 Add support for mips16 (16 bit MIPS implementation):
3073 * mips16-opc.c: New file.
3074 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
3075 (mips16_reg_names): New static array.
3076 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
3077 after seeing a 16 bit symbol.
3078 (print_insn_little_mips): Likewise.
3079 (print_insn_mips16): New static function.
3080 (print_mips16_insn_arg): New static function.
3081 * mips-opc.c: Add jalx instruction.
3082 * Makefile.in (mips16-opc.o): New target.
3083 * configure.in: Use mips16-opc.o for bfd_mips_arch.
3084 * configure: Rebuild.
3086 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
3088 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
3089 operand specifiers in *save, *restore and movem* instructions.
3091 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
3094 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
3095 register operands for immediate arithmetic, not, neg, negx, and
3096 set according to condition instructions.
3098 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
3099 specifier of the effective-address operand in immediate forms of
3100 arithmetic instructions. The specifier for the immediate operand
3101 notes how and where the constant will be stored.
3103 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
3105 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
3108 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
3111 * mn10300-dis.c (disassemble): Prefix registers with '%'.
3113 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
3115 * mn10300-dis.c (disassemble): Handle register lists.
3117 * mn10300-opc.c: Fix handling of register list operand for
3118 "call", "ret", and "rets" instructions.
3120 * mn10300-dis.c (disassemble): Print PC-relative and memory
3121 addresses symbolically if possible.
3122 * mn10300-opc.c: Distinguish between absolute memory addresses,
3123 pc-relative offsets & random immediates.
3125 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
3127 (disassemble): Handle SPLIT and EXTENDED operands.
3129 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
3131 * mn10300-dis.c: Rough cut at printing some operands.
3133 * mn10300-dis.c: Start working on disassembler support.
3134 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
3136 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
3138 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
3140 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3142 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
3144 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
3146 * mn10300-opc.c (mn10300_opcodes): Demand parens around
3147 register argument is calls and jmp instructions.
3149 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
3151 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
3152 getx operand. Fix opcode for mulqu imm,dn.
3154 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
3156 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
3157 in MN10300_OPERAND_SPLIT operands for how many bits
3158 appear in the basic insn word. Add IMM32_HIGH24,
3159 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
3160 (mn10300_opcodes): Use new operands as needed.
3162 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
3163 for bset, bclr, btst instructions.
3164 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
3166 * mn10300-opc.c (mn10300_operands): Remove many redundant
3167 operands. Update opcode table as appropriate.
3168 (IMM32): Add MN10300_OPERAND_SPLIT flag.
3169 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
3171 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
3173 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
3174 operands (for indexed load/stores). Fix bitpos for DI
3175 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
3176 few instructions that insert immediates/displacements in the
3177 middle of the instruction. Add IMM8E for 8 bit immediate in
3178 the extended part of an instruction.
3179 (mn10300_operands): Use new opcodes as appropriate.
3181 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3183 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
3184 sequential so the assembler never parallelizes it with
3187 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
3189 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
3190 a data/address register that appears in register field 0
3191 and register field 1.
3192 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
3194 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
3196 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
3197 standard disassembly.
3199 * alpha-opc.c (alpha_operands): Rearrange flags slot.
3200 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
3201 Recategorize PALcode instructions.
3203 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
3205 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
3207 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
3209 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
3210 there are no operand types.
3212 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
3214 * v850-opc.c (D9_RELAX): Renamed from D9, all references
3216 (v850_operands): Make sure D22 immediately follows D9_RELAX.
3218 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
3220 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
3222 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
3224 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
3225 and sst.w instructions.
3227 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
3230 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
3232 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
3235 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
3237 * ppc-opc.c (PPCPWR2): Define.
3238 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
3241 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
3243 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
3244 field for movhu instruction.
3246 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
3247 cast value to "long" not "signed long" to keep hpux10
3250 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
3252 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3255 * mn10300-opc.c (FMT*): Remove definitions.
3257 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3258 for shift-by-register opcodes.
3260 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3261 into [AD][MN][01] for encoding the position of the register
3264 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3266 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3267 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3269 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3271 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3272 Fix various typos. Add "PAREN" operand.
3273 (MEM, MEM2): Define.
3274 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3275 operands. Fix several typos.
3277 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3280 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3282 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3283 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3285 (mn10300_opcodes): Break opcode format out into its own field.
3286 Update many operand fields to deal with signed vs unsigned
3287 issues. Fix one or two typos in the "mov" instruction
3288 opcode, mask and/or operand fields.
3290 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3292 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3293 m68851 wasn't reset.
3295 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3297 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3298 all opcodes. Very rough cut at operands for all opcodes.
3300 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3303 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3305 * mn10200-opc.c, mn10300-opc.c: New files.
3306 * mn10200-dis.c, mn10300-dis.c: New files.
3307 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3308 * disassemble.c: Break mn10x00 support into 10200 and 10300
3310 * configure.in: Likewise.
3311 * configure: Rebuilt.
3313 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3315 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3317 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3319 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3321 * disassemble (ARCH_mn10x00): Define.
3322 (disassembler): Handle bfd_arch_mn10x00.
3323 * configure.in: Recognize bfd_mn10x00_arch.
3324 * configure: Rebuilt.
3326 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3328 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3329 accordingly. Don't declare functions using op_rtn.
3331 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3333 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3334 params to be more standard.
3335 * (disassemble): Print absolute addresses and symbolic names for
3336 branch and jump targets.
3337 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3339 * (v850_opcodes): Add breakpoint insn.
3341 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3343 * m68k-opc.c: Move the fmovemx data register cases before the
3344 other cases, so that they get recognized before the data register
3345 does gets treated as a degenerate register list.
3347 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3349 * mips-opc.c: Add a case for "div" and "divu" with two registers
3350 and a destination of $0.
3352 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3354 * mips-dis.c (print_insn_arg): Add prototype.
3355 (_print_insn_mips): Ditto.
3357 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3359 * mips-dis.c (print_insn_arg): Print condition code registers as
3362 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3364 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3366 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3368 * v850-dis.c (disassemble): Make static. Provide prototype.
3370 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3372 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3375 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3377 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3378 ']' characters into the output stream.
3379 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3380 Add "memop" field to all opcodes (for the disassembler).
3381 Reorder opcodes so that "nop" comes before "mov" and "jr"
3382 comes before "jarl".
3384 * v850-dis.c (print_insn_v850): Fix typo in last change.
3386 * v850-dis.c (print_insn_v850): Properly handle disassembling
3387 a two byte insn at the end of a memory region when the memory
3388 region's size is only two byte aligned.
3390 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3392 * v850-dis.c (v850_reg_names): Define.
3393 (v850_sreg_names, v850_cc_names): Likewise.
3394 (disassemble): Very rough cut at printing operands (unformatted).
3396 * v850-opc.c (BOP_MASK): Fix.
3397 (v850_opcodes): Fix mask for jarl and jr.
3399 * v850-dis.c: New file. Skeleton for disassembler support.
3400 * Makefile.in Remove v850 references, they're not needed here.
3401 * configure.in: Add v850-dis.o when building v850 toolchains.
3402 * configure: Rebuilt.
3403 * disassemble.c (disassembler): Call v850 disassembler.
3405 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3406 (insert_d8_6, extract_d8_6): New functions.
3407 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3408 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3410 (IF4A, IF4B): Use "D7" instead of "D7S".
3411 (IF4C, IF4D): Use "D8_7" instead of "D8".
3412 (IF4E, IF4F): New. Use "D8_6".
3413 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3414 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3416 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3417 (v850_operands): Change D16 to D16_15, use special insert/extract
3418 routines. New new D16 that uses the generic insert/extract code.
3419 (IF7A, IF7B): Use D16_15.
3420 (IF7C, IF7D): New. Use D16.
3421 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3423 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3424 message. Issue an error if the branch offset is odd.
3426 * v850-opc.c: Add notes about needing special insert/extract
3427 for all the load/store insns, except "ld.b" and "st.b".
3429 * v850-opc.c (insert_d22, extract_d22): New functions.
3430 (v850_operands): Use insert_d22 and extract_d22 for
3432 (insert_d9): Fix range check.
3434 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3436 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3437 and set bits field to D9 and D22 operands.
3439 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3441 * v850-opc.c (v850_operands): Define SR2 operand.
3442 (v850_opcodes): "ldsr" uses R1,SR2.
3444 * v850-opc.c (v850_opcodes): Fix opcode specs for
3445 sld.w, sst.b, sst.h, sst.w, and nop.
3447 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3449 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3450 end of the opcode table.
3452 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3454 * d10v-opc.c (pre_defined_registers): Added register pairs,
3455 "r0-r1", "r2-r3", etc.
3457 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3459 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3460 Create I16U for an unsigned 16bit mmediate operand.
3461 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3463 * v850-opc.c (v850_operands): Define EP operand.
3464 (IF4A, IF4B, IF4C, IF4D): Use EP.
3466 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3467 with immediate operand, "movhi". Tweak "ldsr".
3469 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3470 correct. Get sld.[bhw] and sst.[bhw] closer.
3472 * v850-opc.c (v850_operands): "not" is a two byte insn
3474 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3476 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3478 * v850-opc.c (two): Get order of words correct.
3480 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3482 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3483 register source and destination operands.
3484 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3486 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3487 same thinko in "trap" opcode.
3489 * v850-opc.c (v850_opcodes): Add initializer for size field
3492 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3493 Add D8 for 8-bit unsigned field in short load/store insns.
3494 (IF4A, IF4D): These both need two registers.
3495 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3496 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3497 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3498 for "ldsr" and "stsr".
3499 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3502 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3503 short store word (sst.w).
3505 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3507 * v850-opc.c (v850_operands): Added insert and extract fields,
3508 pointers to functions that handle unusual operand encodings.
3510 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3512 * v850-opc.c (v850_opcodes): Enable "trap".
3514 * v850-opc.c (v850_opcodes): Fix order of displacement
3515 and register for "set1", "clr1", "not1", and "tst1".
3517 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3519 * v850-opc.c (v850_operands): Add "B3" support.
3520 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3523 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3525 * v850-opc.c: Close unterminated comment.
3527 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3529 * v850-opc.c (v850_operands): Add flags field.
3530 (v850_opcodes): add move opcodes.
3532 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3534 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3535 * configure: (bfd_v850v_arch) Add new case.
3536 * configure.in: (bfd_v850_arch) Add new case.
3537 * v850-opc.c: New file.
3539 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3541 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3543 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3545 * d10v-opc.c: Add additional information to the opcode
3546 table to help determinine which instructions can be done
3549 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3551 * mpw-make.sed: Update editing of include pathnames to be
3554 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3556 * arm-opc.h: Added "bx" instruction definition.
3558 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3560 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3562 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3564 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3566 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3568 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3570 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3572 * makefile.vms: Update for alpha-opc changes.
3574 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3576 * i386-dis.c (print_insn_i386): Actually return the correct value.
3577 (ONE, OP_ONE): #ifdef out; not used.
3579 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3581 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3582 Changed subi operand type to treat 0 as 16.
3584 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3586 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3589 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3591 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3592 memory transfer instructions. Add new format string entries %h and %s.
3593 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3596 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3598 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3599 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3601 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3603 * alpha-dis.c (print_insn_alpha_osf): Remove.
3604 (print_insn_alpha_vms): Remove.
3605 (print_insn_alpha): Make globally visible. Chose the register
3606 names based on info->flavour.
3607 * disassemble.c: Always return print_insn_alpha for the alpha.
3609 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3611 * d10v-dis.c (dis_long): Handle unknown opcodes.
3613 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3615 * d10v-opc.c: Changes to support signed and unsigned numbers.
3616 All instructions with the same name that have long and short forms
3617 now end in ".l" or ".s". Divs added.
3618 * d10v-dis.c: Changes to support signed and unsigned numbers.
3620 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3622 * d10v-dis.c: Change all functions to use info->print_address_func.
3624 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3626 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3627 move ccr/sr insns more strict so that the disassembler only
3628 selects them when the addressing mode is data register.
3630 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3631 * d10v-opc.c (pre_defined_registers): Declare.
3632 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3633 to pick a better name for the registers.
3635 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3637 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3638 operands for fexpand and fpmerge. From Christian Kuehnke
3639 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3641 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3643 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3644 print routine. Take new regnames and cpumask arguments.
3645 Kill the environment variable nonsense.
3646 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3647 (print_insn_alpha_vms): New function. Do VMS style regnames.
3648 * disassemble.c (disassembler): Test bfd flavour to pick
3649 between OSF and VMS routines. Default to OSF.
3651 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3653 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3654 * configure: Rebuild.
3655 * Makefile.in (install): Use @INSTALL_SHLIB@.
3657 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3659 * configure: (bfd_d10v_arch) Add new case.
3660 * configure.in: (bfd_d10v_arch) Add new case.
3661 * d10v-dis.c: New file.
3662 * d10v-opc.c: New file.
3663 * disassemble.c (disassembler) Add entry for d10v.
3665 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3667 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3668 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3670 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3672 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3673 distinguish between variants of the instruction set.
3674 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3675 distinguish between variants of the instruction set.
3677 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3679 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3680 the 8086 instruction set.
3681 * i386-dis.c: General cleanups. Make most things static. Add
3682 prototypes. Get rid of static variables aflags and dflags. Pass
3683 them as args (to almost everything).
3685 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3687 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3689 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3691 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3692 if the next arg is marked with SRC_IN_DST. Gross.
3694 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3695 we're looking for and find EXR.
3697 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3698 if we're looking for KBIT and we don't find it.
3700 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3703 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3704 3bit immediate operands.
3706 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3708 * Released binutils 2.7.
3710 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3711 <kkaempf@progis.ac-net.de>.
3713 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3715 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3717 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3719 * sparc-dis.c (print_insn_sparclite): New routine to print
3720 sparclite instructions.
3722 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3724 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3726 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3728 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3729 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3730 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3732 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3734 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3735 Use autoconf-set values.
3736 (docdir, oldincludedir): Removed.
3737 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3739 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3741 * alpha-opc.c: New file.
3742 * alpha-opc.h: Remove.
3743 * alpha-dis.c: Complete rewrite to use new opcode table.
3744 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3745 * configure: Rebuild with autoconf 2.10.
3746 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3747 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3749 (alpha-opc.o): New target.
3751 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3753 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3754 Set imm_added_to_rs1 even if the source and destination register
3757 * sparc-opc.c: Add some two operand forms of the wr instruction.
3759 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3761 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3764 * disassemble.c (disassembler): Handle H8/S.
3765 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3767 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3769 * sparc-opc.c: Add beq/teq as aliases for be/te.
3771 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3772 <sergei@msil.sps.mot.com>.
3774 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3776 * makefile.vms: New file.
3778 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3780 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3782 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3785 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3787 * i386-dis.c (OP_OFF): Call append_prefix.
3789 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3791 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3792 unsigned long to silence a warning from the Solaris PowerPC
3795 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3797 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3799 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3801 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3803 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3804 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3805 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3806 cpush, cpusha, cpull sparclet insns.
3808 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3810 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3812 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3814 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3815 Set F_FLOAT on other floating point instructions.
3817 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3819 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3821 (powerpc_opcodes): Add 860/821 specific SPRs.
3823 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3825 * configure.in: Permit --enable-shared to specify a list of
3826 directories. Set and substitute BFD_PICLIST.
3827 * configure: Rebuild.
3828 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3829 uses. Set to @BFD_PICLIST@.
3831 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3833 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3834 not "abs", which may be needed for the absolute in something
3835 like btst #0,@10:8. Print L_3 immediates separately from other
3836 immediates. Change ABSMOV reference to ABS8MEM.
3838 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3840 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3841 (current_arch_mask): New static global.
3842 (compute_arch_mask): New static function.
3843 (print_insn_sparc): Delete sparc_v9_p. New static local
3844 current_mach. Resort opcode table if current_mach changes.
3845 Generalize "insn not supported" test.
3846 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3847 Delete test for v9/!v9.
3848 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3850 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3851 (brfcx): Renamed to FBRX.
3852 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3853 coprocessor mnemonics are not supported on the sparclet).
3854 (condf): Renamed to CONDF.
3855 (SLCBCC2): Delete F_ALIAS flag.
3857 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3859 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3860 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3862 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3864 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3865 that the shared library version number is set correctly.
3867 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3869 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3870 Miles Bader <miles@gnu.ai.mit.edu>.
3871 * configure: Rebuild.
3873 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3875 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3878 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3880 * configure: Rebuild with autoconf 2.8.
3882 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3884 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3885 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3887 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3889 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3890 since they appear as targets in Makefile.in.
3891 * configure: Rebuild.
3893 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3895 * mpw-make.sed: Edit out shared library support bits.
3897 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3899 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3900 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3901 (sparc_opcodes): Add sparclet insns.
3902 (sparclet_cpreg_table): New static local.
3903 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3904 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3906 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3908 * i386-dis.c (index16): New static variable.
3909 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3911 (OP_indirE): Return result of OP_E.
3912 (OP_E): Check for 16 bit addressing mode, and disassemble
3913 correctly. Optimised 32 bit case a little. Don't print
3914 "(base,index,scale)" when sib specifies only an offset.
3916 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3918 * configure.in: Set and substitute SHLIB_DEP.
3919 * configure: Rebuild.
3920 * Makefile.in (SHLIB_DEP): New variable.
3921 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3922 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3923 COMMON_SHLIB, add them to piclist with appropriate modifications.
3924 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3925 here: just use piclist.
3927 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3929 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3930 (print_insn_sparc): Rewrite v9/not-v9 tests.
3931 (compare_opcodes): Likewise.
3932 * sparc-opc.c (MASK_<ARCH>): Define.
3933 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3934 (sparclet,v6notv9): Define.
3935 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3936 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3938 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3940 * configure.in: Call AC_PROG_CC before configure.host.
3941 * configure: Rebuild.
3943 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3945 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3947 * i386-dis.c (onebyte_has_modrm): New static array.
3948 (twobyte_has_modrm): New static array.
3949 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3951 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3953 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3956 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3958 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3961 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3963 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3964 m68010up, not just m68020up | cpu32.
3966 * Makefile.in (SONAME): New variable.
3967 ($(SHLINK)): Make a link to the transformed name, as well.
3968 (stamp-tshlink): New target.
3969 (install): Skip stamp-tshlink during install.
3971 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3973 * configure.in: Call AC_ARG_PROGRAM.
3974 * configure: Rebuild.
3975 * Makefile.in (program_transform_name): New variable.
3976 (install): Transform library name before installing it.
3978 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3980 * i960-dis.c (mem): Add HX dcinva instruction.
3982 Support for building as a shared library, based on patches from
3983 Alan Modra <alan@spri.levels.unisa.edu.au>:
3984 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3985 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3986 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3987 * configure: Rebuild.
3988 * Makefile.in (ALLLIBS): New variable.
3989 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3990 (COMMON_SHLIB, SHLINK): New variables.
3991 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3992 (STAGESTUFF): Remove variable.
3993 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3994 (stamp-piclist, piclist): New targets.
3995 ($(SHLIB), $(SHLINK)): New targets.
3996 ($(OFILES)): Depend upon stamp-picdir.
3997 (disassemble.o): Build twice if PICFLAG is set.
3998 (MOSTLYCLEAN): Add pic/*.o.
3999 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
4000 (distclean): Remove pic and stamp-picdir.
4001 (install): Install shared libraries.
4002 (stamp-picdir): New target.
4004 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
4006 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
4007 Print unknown instruction as "unknown", rather than in hex.
4009 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
4011 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
4013 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
4015 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
4017 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
4019 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
4020 when necessary. From Ulrich Drepper
4021 <drepper@myware.rz.uni-karlsruhe.de>.
4023 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
4025 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
4026 sparc_num_opcodes. Update architecture enum values.
4027 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
4028 (sparc_opcode_lookup_arch): New function.
4029 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
4030 (sparc_opcodes): Add v9a shutdown insn.
4032 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
4034 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
4035 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
4037 (print_insn_sparc64): Deleted.
4038 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
4041 * sparc-opc.c (architecture_pname): Add v9a.
4043 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
4045 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
4046 incorrectly defined as 0x16 when it should be 0x15.
4047 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
4048 (alpha_insn_set): added cvtst and cvttq float ops. Also added
4049 excb (exception barrier) which is defined in the Alpha
4050 Architecture Handbook version 2.
4051 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
4052 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
4053 disassembled as or, for example.
4055 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
4057 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
4058 (_print_insn_mips): Change i from int to unsigned int.
4060 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
4062 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
4063 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
4065 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
4067 * i386-dis.c: Added Pentium Pro instructions.
4069 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4071 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
4074 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4076 * sh-opc.h (sh_nibble_type): Added REG_B.
4077 (sh_arg_type): Added A_REG_B.
4078 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
4080 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
4082 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
4084 * disassemble.c (disassembler): Use new bfd_big_endian macro.
4086 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
4088 * Makefile.in (distclean): Remove stamp-h. From Ronald
4089 F. Guilmette <rfg@monkeys.com>.
4091 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
4093 From David Mosberger-Tang <davidm@azstarnet.com>:
4094 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
4097 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4099 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
4100 (sh_table): Added many SH3 opcodes.
4101 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
4103 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4105 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
4106 (subco,subco.): Mark this PPC, not PPCCOM.
4108 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
4110 * configure: Rebuild with autoconf 2.7.
4112 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
4114 * configure: Rebuild with autoconf 2.6.
4116 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
4118 * configure.in: Sort list of architectures. Accept but do nothing
4119 for alliant, convex, pyramid, romp, and tahoe.
4121 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
4123 * a29k-dis.c (print_special): Change num to unsigned int.
4125 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
4127 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
4130 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
4132 * configure.in: Call AC_CHECK_PROG to find and cache AR.
4133 * configure: Rebuilt.
4135 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
4137 * configure.in: Add case for bfd_i860_arch.
4138 * configure: Rebuild.
4140 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
4142 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
4143 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
4144 (NEXTDOUBLE): Likewise.
4145 (print_insn_m68k): Don't match fmoveml if there is more than one
4146 register in the list.
4147 (print_insn_arg): Handle a place of '8' for a type of 'L'.
4149 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
4151 * m68k-opc.c: Use #W rather than #w.
4152 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
4154 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
4156 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
4157 and likewise for all the dbxx opcodes.
4159 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
4161 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
4163 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
4165 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
4166 the VR4100 specific instructions to the mips_opcodes structure.
4168 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
4170 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
4171 ugly Metrowerks bug in CW6, is fixed in CW7.
4173 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4175 * ppc-opc.c (whole file): Add flags for common/any support.
4177 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
4179 * Makefile.in (BISON): Remove macro.
4180 (FLAGS_TO_PASS): Remove BISON.
4182 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
4184 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
4186 * m68k-dis.c (print_insn_m68k): Recognize all two-word
4187 instructions that take no args by looking at the match mask.
4188 (print_insn_arg): Always print "%" before register names.
4189 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
4190 [case '_']: Don't print "@#" before address.
4191 [case 'J']: Use "%s" as format string, not register name.
4192 [case 'B']: Treat place == 'C' like 'l' and 'L'.
4194 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
4196 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
4199 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
4201 From David Mosberger-Tang <davidm@azstarnet.com>
4203 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
4204 (alpha_insn_set): added definitions for VAX floating point
4205 instructions (Unix compilers don't generate these, but handcoded
4206 assembly might still use them).
4208 * alpha-dis.c (print_insn_alpha): added support for disassembling
4209 the miscellaneous instructions in the Alpha instruction set.
4211 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
4213 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
4214 no longer create sysdep.h, sed ppc-opc.c to work around a
4215 serious Metrowerks C bug.
4216 * mpw-make.in: Remove.
4217 * mpw-make.sed: New file, used by mpw-configure to edit
4218 Makefile.in into an MPW makefile.
4220 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
4222 * Makefile.in (maintainer-clean): New synonym for realclean.
4224 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
4226 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
4227 which use '0', '1', and '2' instead. Specify the proper size for
4228 a pmove immediate operand. Correct the pmovefd patterns to be
4229 moves to a register, not from a register.
4230 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
4232 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
4234 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
4235 %psr, %wim, %tbr as F_NOTV9.
4237 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
4239 * Makefile.in (Makefile): Just rebuild Makefile when running
4241 (config.h, stamp-h): New targets.
4242 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
4243 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
4244 rebuilding config.h.
4245 * configure: Rebuild.
4247 * mips-opc.c: Change unaligned loads and stores with "t,A"
4248 operands to use "t,A(b)".
4250 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4252 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4254 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4256 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4257 until 3 instead of until 2.
4259 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4261 * Makefile.in (ALL_CFLAGS): Define.
4262 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4263 (MOSTLYCLEAN): Add config.log.
4264 (distclean): Don't remove config.log.
4265 * configure.in: Substitute HDEFINES.
4266 * configure: Rebuild.
4268 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4270 * sh-opc.h (sh_arg_type): Add F_FR0.
4271 (sh_table, case fmac): Add F_FR0 as first argument.
4273 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4275 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4277 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4279 * sparc-dis.c: Remove all references to NO_V9.
4281 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4283 * aclocal.m4: Just include ../bfd/aclocal.m4.
4284 * configure: Rebuild.
4286 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4288 * sparc-dis.c (X_DISP19): Define.
4289 (print_insn, case 'G'): Use it.
4290 (print_insn, case 'L'): Sign extend displacement.
4292 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4294 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4295 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4296 host_makefile_frag or frags.
4297 * aclocal.m4: New file.
4298 * configure: Rebuild.
4299 * Makefile.in (INSTALL): Set to @INSTALL@.
4300 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4301 (INSTALL_DATA): Set to @INSTALL_DATA@.
4303 (AR_FLAGS): Set to rc rather than qc.
4304 (CC): Define as @CC@.
4305 (CFLAGS): Set to @CFLAGS@.
4306 (@host_makefile_frag@): Remove.
4307 (config.status): Remove dependency upon @frags@.
4309 * configure.in: ../bfd/config.bfd now just sets shell variables.
4310 Use them rather than looking through target Makefile fragments.
4311 * configure: Rebuild.
4313 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4315 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4317 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4319 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4320 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4323 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4324 (lookup_{name,value}): New functions.
4325 (prefetch_table): New static local.
4326 (sparc_{encode,decode}_prefetch): New functions.
4327 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4329 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4331 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4334 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4336 * sh-dis.c: Correct comment on first line of file.
4338 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4340 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4342 * sparc-opc.c (asi, membar): New static locals.
4343 (sparc_{encode,decode}_{asi,membar}): New functions.
4344 (sparc_opcodes, membar insn): Fix.
4345 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4346 Support decoding of membar masks.
4349 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4351 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4353 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4355 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4356 and likewise for the other branches. Add bhs as an alias for bcc,
4357 and likewise for the size variants. Add dbhs as an alias for
4360 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4362 * sh-opc.h (FP sts instructions): Update to match reality.
4364 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4366 * m68k-dis.c: (fpcr_names): Add % before all register names.
4367 (reg_names): Likewise.
4368 (print_insn_arg): Don't explicitly print % before register names.
4369 Add % before register names in static array names. In case 'r',
4370 print data registers as `@(Dn)', not `Dn@'. When printing a
4371 memory address, don't print @# before it.
4372 (print_indexed): Change base_disp and outer_disp from int to
4373 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4374 syntax. Sign extend 8 byte displacement correctly.
4375 (print_base): Print using MIT syntax. Print zpc when appropriate.
4376 Change parameter disp from int to bfd_vma.
4378 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4381 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4383 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4384 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4385 * sh-opc.h (sh_arg_type): Add new operand types.
4386 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4388 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4390 * Makefile.in (distclean): Remove generated file config.h.
4392 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4394 * Makefile.in (distclean): Remove generated file config.h.
4396 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4398 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4400 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4402 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4403 rather than numopcodes. Use m68k_opcodes rather than removed
4404 opcode function. Don't check F_ALIAS.
4405 (print_insn_arg): Change first parameter to be const char *.
4406 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4407 (m68k-opc.o): New target.
4408 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4409 * configure: Rebuild.
4411 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4413 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4414 (opcode_bits, opcode_hash_table): New variables.
4415 (opcodes_initialized): Renamed from opcodes_sorted.
4416 (build_hash_table): New function.
4417 (is_delayed_branch): Use hash table.
4418 (print_insn): Renamed from print_insn_sparc, made static.
4419 Build and use hash table. If !sparc64, ignore sparc64 insns,
4420 and vice-versa if sparc64.
4421 (print_insn_sparc, print_insn_sparc64): New functions.
4422 (compare_opcodes): Move sparc64 opcodes to end.
4423 Print commutative insns with constant second.
4424 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4426 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4428 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4429 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4430 avoids printing a delay slot in a delay slot.
4431 * sh-opc.h (sh_table): Fully bracket last entry.
4433 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4435 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4437 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4439 * configure.in: Get host_makefile_frag from ${srcdir}.
4441 * configure.in: Autoconfiscated. Check for string[s].h. Create
4442 config.h from config.in. Don't set up sysdep.h link.
4443 * sysdep.h: New file.
4444 * configure, config.in: New files, generated from configure.in.
4445 * Makefile.in: Updated to be processed autoconf-style.
4446 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4447 (Makefile): Depend on config.status.
4448 (config.status): New rule.
4449 * configure.bat: Update Makefile substitutions.
4451 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4453 * mips-opc.c (L1): Define.
4454 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4455 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4458 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4460 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4461 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4462 have multiple add units but only a single logical unit.
4464 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4465 shifted by 18, without any insertion or extraction function.
4466 (insert_cr, extract_cr): Remove.
4468 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4470 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4473 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4475 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4476 * sh-opc.h: Add copyright.
4478 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4480 * Makefile.in (crunch-m68k): Delete extra target accidentally
4481 checked in a while ago.
4483 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4485 * sh-opc.h (sh_table): Add SH3 support.
4487 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4489 * sh-opc.h: Added bsrf and braf.
4491 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4493 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4494 bogus [ls]fm{ea,fd} patterns.
4496 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4497 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4498 initialize it from memory. Make function static.
4499 (print_insn_{big,little}_arm): New functions.
4500 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4501 the correct endianness.
4503 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4505 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4508 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4510 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4511 17th, so that it builds again using GCC as the compiler.
4513 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4515 * mips-dis.c (print_insn_little_mips): Cast return value from
4516 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4517 expects an unsigned long, and that might be fewer words of
4518 argument storage (e.g., if bfd_vma is long long on a 32-bit
4520 (print_insn_big_mips): Likewise with bfd_getb32 value.
4521 (_print_insn_mips): Now static.
4523 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4525 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4526 gcc memory hog problem with initializer is fixed.
4528 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4530 Merge in support for Mac MPW as a host.
4531 (Old change descriptions retained for informational value.)
4533 * mpw-config.in (archname): Compute from the config.
4534 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4536 * mpw-config.in (target_arch): Compute from canonical target.
4537 (m68k, mips, powerpc, sparc): Add architectures.
4538 * mpw-make.in (disassemble.c.o): Add.
4539 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4541 * mpw-config.in (BFD_MACHINES): Set to a default value.
4542 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4544 * mpw-make.in (CSEARCH): Add extra-include to search path.
4546 * mpw-config.in (varargs.h): Don't create.
4547 (sysdep.h): Create using forward-include.
4548 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4550 * mpw-config.in: New file, MPW version of configure.in.
4551 * mpw-make.in: New file, MPW version of Makefile.in.
4553 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4555 * alpha-dis.c (print_insn_alpha): Put empty statement after
4558 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4560 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4561 (low_sign_extend): Likewise.
4562 (get_field): Delete unused function.
4563 (set_field, deposit_14, deposit_21): Likewise.
4565 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4567 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4570 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4572 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4574 * alpha-opc.h (OSF_ASMCODE): define
4575 print pal-code names as defined in App C of the
4576 Alpha Architecture Reference Manual
4578 * alpha-dis.c: cleaned up output
4579 print stylized code forms as defined in App A.4.3 of the
4580 Alpha Architecture Reference Manual
4582 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4584 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4586 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4589 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4591 * m68k-dis.c (opcode): New function. Returns address of opcode
4592 table entry given index, even if the opcode table was split to
4593 work around gcc bugs.
4594 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4596 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4597 (reg_names): Now const.
4598 (print_insn_arg): Arrays cacheFieldName and names now const.
4599 (print_indexed): Array scales now const.
4601 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4603 * ppc-opc.c: Sort recently added instructions by minor opcode
4604 number within major opcode number.
4606 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4608 * hppa-dis.c: Include libhppa.h.
4610 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4612 * mips-opc.c: Change dli to use M_DLI, and add dla.
4614 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4616 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4618 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4620 * mips-opc.c: Add r4650 mul instruction.
4622 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4624 * mips-opc.c: Add uld and usd macros for unaligned double load and
4627 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4629 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4630 mfdcr, mtdcr, icbt, iccci.
4632 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4634 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4635 signed char fields to shorts, more portable.
4637 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4639 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4640 char fields as signed chars, since they may have negative values.
4642 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4644 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4645 (mycroft@netbsd.org).
4647 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4649 From "Logg, Ed" <elogg@ea.com>:
4650 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4651 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4654 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4656 * ppc-opc.c: Changes based on patch from David Edelsohn
4657 <edelsohn@mhpcc.edu>.
4658 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4661 (insert_tbr): New static function.
4662 (extract_tbr): New static function.
4663 (XFXFXM_MASK, XFXM): Define.
4664 (XSPRBAT_MASK, XSPRG_MASK): Define.
4665 (powerpc_opcodes): Add instructions to access special registers by
4666 name. Add mtcr and mftbu.
4668 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4670 * mips-opc.c (P3): Define.
4671 (mips_opcodes): Add mad and madu.
4673 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4675 * configure.in: Add W65 support.
4676 * disassemble.c: Likewise.
4677 * w65-opc.h, w65-dis.c: New files.
4679 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4681 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4684 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4686 * mips-opc.c: Add dli as a synonym for li.
4688 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4690 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4691 print something for reserved opcode values, even if it won't
4694 * mips-dis.c (_print_insn_mips): When initializing, shift right
4695 and mask, to avoid sign extension problems on the Alpha.
4697 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4700 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4702 * sh-opc.h (mov.l gbr): Get direction right.
4703 * sh-dis.c (print_insn_shx): New function.
4704 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4705 print opcodes with right byte order.
4707 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4709 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4710 to avoid conflicts with getopt.
4712 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4714 * hppa-dis.c (print_insn_hppa): Read the instruction using
4715 bfd_getb32, so that it works on a little endian or 64 bit host.
4716 Remove unused local variable op.
4718 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4720 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4721 addu does not work correctly if -mips3.
4723 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4725 * a29k-dis.c (print_special): Add special register names defined
4726 on 29030, 29040 and 29050.
4727 (print_insn): Handle new operand type 'I'.
4729 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4731 * Makefile.in (INSTALL): Use top level install.sh script.
4733 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4735 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4736 that it works on a little endian host.
4738 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4740 * configure.in: Use ${config_shell} when running config.bfd.
4742 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4744 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4746 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4748 * a29k-dis.c (print_insn): Print the opcode.
4750 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4752 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4754 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4756 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4758 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4760 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4761 which store a value into memory.
4763 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4765 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4766 * arm-dis.c, arm-opc.h: New files.
4768 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4770 * Makefile.in (ns32k-dis.o): Add dependency.
4771 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4772 string, not as array of chars.
4774 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4776 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4778 * sparc-opc.c: Added sparclite extended FP operations, and
4779 versions of v9 impdep* instructions permitting specification of
4782 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4784 * i960-dis.c (reg_names): Now const.
4785 (struct sparse_tabent): New type, copied from array type in mem
4787 (ctrl): Local static array ctrl_tab now const.
4788 (cobr): Local static array cobr_tab now const.
4789 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4790 static variable mem_tab no longer explicitly initialized. Changed
4791 mem_init to const array of struct sparse_tabent.
4792 (reg): Local static variable reg_tab no longer explicitly
4793 initialized. Changed reg_init to const array of struct
4795 (ea): Local static array scale_tab now const.
4797 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4800 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4802 * configure.bat: the disassember needs to be enabled for
4803 "objdump -d" to work in djgpp.
4805 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4807 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4808 (invalid_float): Enabled general version, doesn't require running
4809 on ns32k host. Changed to take char* argument, and test for
4810 explicitly specified sizes, instead of using sizeof() on host CPU
4812 (INVALID_FLOAT): Cast first argument.
4813 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4814 list_P032, list_M032): Now const.
4815 (optlist, list_search): Made appropriate arguments now point to
4817 (print_insn_arg): Changed static array of one-character-string
4818 pointers into a static const array of characters; fixed sprintf
4819 statement accordingly.
4821 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4823 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4824 from distribution. A ns32k-dis.c from a previous distribution has
4825 been brought up to date and supports the new interface.
4827 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4829 * configure.in: add bfd_ns32k_arch target support.
4831 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4832 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4834 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4836 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4839 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4841 * h8300-dis.c, mips-dis.c: Don't use true and false.
4843 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4845 * configure.in: Change --with-targets to --enable-targets.
4847 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4849 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4850 opcodes to the first instruction with that opcode, to speed
4851 disassembly of large files. From ralphc@pyramid.com (Ralph
4854 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4856 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4858 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4860 * configure.bat: update to latest makefile.in
4862 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4864 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4865 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4866 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4867 slot insn is in a delay slot.
4868 * z8k-opc.h: (resflg): Fix patterns.
4869 * h8500-opc.h Fix CR insn patterns.
4871 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4873 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4874 "cmpl" before POWER versions, so that gas -many uses them.
4876 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4878 * disassemble.c: New file.
4879 * Makefile.in (OFILES): Add disassemble.o.
4880 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4881 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4882 binutils/configure.in.
4884 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4885 opcode being examined.
4887 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4889 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4890 (insert_ral, insert_ram, insert_ras): New functions.
4891 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4892 RAS for store with update.
4894 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4896 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4897 (edelsohn@npac.syr.edu).
4899 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4901 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4904 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4906 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4908 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4910 * ppc-opc.c (powerpc_operands): The signedp field has been
4911 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4912 instead. Add new operand SISIGNOPT.
4913 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4914 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4915 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4918 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4920 * i386-dis.c (struct private): Renamed to dis_private. `private'
4921 is a reserved word for dynix cc.
4923 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4925 * configure.in: Change error message to refer to bfd/config.bfd
4926 rather than bfd/configure.in.
4928 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4930 * ppc-opc.c: Define POWER2 as short alias flag.
4931 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4934 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4936 * i960-dis.c (print_insn_i960): Don't read a second word for
4937 opcodes 0, 1, 2 and 3.
4939 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4941 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4943 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4945 * m68881-ext.c: Removed; no longer used.
4946 * Makefile.in: Changed accordingly.
4948 * m68k-dis.c (ext_format_68881): Don't declare.
4949 (print_insn_m68k): If an instruction uses place 'i', it uses at
4950 least four fixed bytes.
4951 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4952 extended float, convert to double using floatformat_to_double, not
4953 ieee_extended_to_double, and fetch the data before converting it.
4955 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4957 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4958 davidj@ICSI.Berkeley.EDU (David Johnson).
4960 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4962 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4963 PowerPC uses bdnz[l][a].
4965 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4967 * dis-buf.c, i386-dis.c: Include sysdep.h.
4969 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4971 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4973 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4974 by Motorola PowerPC 601 with PPC_OPCODE_601.
4975 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4976 Disassemble Motorola PowerPC 601 instructions as well as normal
4977 PowerPC instructions.
4979 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4981 * i960-dis.c (reg, mem): Just use a static array instead of
4984 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4986 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4987 condition name index if this is for a negated condition.
4989 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4990 Floating point format for 'H' operand is backwards from normal
4991 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4992 operands (fmpyadd and fmpysub), handle bizarre register
4993 translation correctly for single precision format.
4995 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4996 or 'I' operands if the next format specifier is 'M' (fcmp
4997 condition completer).
4999 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5001 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
5002 single number giving a bitmask for the MB and ME fields of an M
5003 form instruction. Change NB to accept 32, and turn it into 0;
5004 also turn 0 into 32 when disassembling. Seperated SH from NB.
5005 (insert_mbe, extract_mbe): New functions.
5006 (insert_nb, extract_nb): New functions.
5007 (SC_MASK): Mask out SA and LK bits.
5008 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
5009 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
5010 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
5011 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
5012 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
5013 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
5014 (powerpc_macros): Define table of macro definitions.
5015 (powerpc_num_macros): Define.
5017 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
5018 if PPC_OPERAND_NEXT is set.
5020 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5022 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
5023 char. Retrieve contents using bfd_getl32 instead of shifting.
5025 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5027 * ppc-opc.c: New file. Opcode table for PowerPC, including
5028 opcodes for POWER (RS/6000).
5029 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
5030 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
5031 (CFILES): Add ppc-dis.c.
5032 (ppc-dis.o, ppc-opc.o): New targets.
5033 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
5035 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
5037 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
5038 No space before 'u', 'f', or 'N'.
5040 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
5042 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
5043 farther than we should.
5045 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
5047 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5049 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
5051 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
5053 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
5054 needs it, to prevent reading past the end of a section.
5056 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5058 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
5059 Removed t,A case for la; always use t,A(b) case.
5061 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5063 From Ted Lemen <mellon@pepper.ncd.com>
5064 * mips-dis.c (print_insn_arg): Handle 'k'.
5065 * mips-opc.c: Make cache use k, not t.
5067 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5069 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
5070 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
5071 FLOAT_FORMAT_CODE to put out floating point register names.
5073 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5075 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
5077 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5079 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
5081 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5083 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
5084 larger than 32. Moved dsxx32 variants first for disassembler.
5086 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5088 * z8kgen.c, z8k-opc.h: Add full lda information.
5090 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
5092 * hppa-dis.c (print_insn_hppa): Do not emit a space after
5093 movb instructions. Any necessary space will be emitted by
5094 the code to handle nullification completers.
5096 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5098 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
5100 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5102 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
5103 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
5105 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5107 * mips-opc.c: Correct lwu opcode value (book had it wrong).
5109 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5111 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
5112 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
5114 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
5116 * m88k-dis.c (m88kdis): comment change. Remove space after
5118 (printop): handle new arg types DEC and XREG for m88110.
5120 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
5122 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
5123 type for absolute branch addresses. Delete special
5124 "ble" and "be" code in 'W' operand code.
5126 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5128 * mips-opc.c: Set hazard information correctly for branch
5129 likely instructions.
5131 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5133 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
5134 info->fprintf_func for printing and info->print_address_func for
5137 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5139 * mips-opc.c: Set INSN_TRAP for tXX instructions.
5141 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5143 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
5144 Corrected second case of "b" for disassembler.
5146 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5148 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
5149 to BFD swapping routines to correspond to BFD name changes.
5151 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5153 * mips-opc.c: Change div machine instruction to be z,s,t rather
5154 than s,t. Change div macro to be d,v,t rather than d,s,t.
5155 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
5156 rem and remu which generates only the corresponding div
5157 instruction. This is for compatibility with the MIPS assembler,
5158 which only generates the simple machine instruction when an
5159 explicit destination of $0 is used.
5160 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
5162 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5164 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
5165 WR_31 hazard for bal, bgezal, bltzal.
5167 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5169 * hppa-dis.c (print_insn_hppa): Use print function
5170 from within the disassemble_info, not fprintf_filtered.
5172 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5174 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
5175 Law, law@cs.utah.edu.)
5177 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5179 * mips-opc.c ("absu"): Removed.
5182 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5184 * mips-opc.c: Added r6000 and r4000 instructions and macros.
5185 Changed hazard information to distinguish between memory load
5186 delays and coprocessor load delays.
5188 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5190 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
5192 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5194 * configure.in: Don't pass cpu to config.bfd.
5196 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5198 * m88k-dis.c (m88kdis): Make class unsigned.
5200 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
5202 * alpha-dis.c (print_insn_alpha): One branch format case was
5203 missing the instruction name.
5205 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
5207 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
5208 Add the arch-specific auxiliary files.
5209 (OFILES): Remove the arch-specific auxiliary files
5210 and use BFD_MACHINES instead of DIS_LIBS.
5211 * configure.in: Set BFD_MACHINES based on --with-targets option.
5213 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5215 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
5218 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5220 * sparc-opc.c: Change CONST to const to deal with gcc
5221 -Dconst=__const -traditional.
5223 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5225 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
5226 coprocessor instructions out of #if 0, and made them use new
5229 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5231 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
5233 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
5235 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
5236 instruction, for use by the disassembler.
5238 * sparc-dis.c (SEX): Add sign extension macro. Replace many
5239 hand-coded sign extensions that depended on 32-bit host ints.
5240 FIXME, we still depend on big-endian host bitfield ordering.
5241 (sparc_print_insn): Set the insn_info_valid field, and the
5242 other fields that describe the instruction being printed.
5244 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
5246 * sparc-opc.c (call): Accept all 6 addressing modes valid for
5247 `jmp' instead of just one of them.
5249 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5251 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
5252 (fput_fp_reg_r): Renamed from fput_reg_r.
5253 (fput_fp_reg): New function.
5254 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5256 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5258 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5260 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5262 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5264 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5265 don't output a space.
5267 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5269 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5271 * mips-opc.c: New file, containing opcode table from
5272 ../include/opcode/mips.h.
5273 * Makefile.in: Add it.
5275 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5277 * m88k-dis.c: New file, moved in from gdb and changed to use the
5278 new dis-asm.h disassembler interface.
5279 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5280 (m88k-dis.o): New target.
5282 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5284 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5285 argument string const char * to correspond to opcode/mips.h.
5287 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5289 * mips-dis.c: Updated to account for name changes in new version
5291 * Makefile.in: Added header file dependencies.
5293 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5295 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5297 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5299 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5300 extend, rather than shifts.
5302 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5304 * Makefile.in: Undo 15 June change.
5306 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5308 * m68k-dis.c (print_insn_arg): Change return value to byte count
5310 * m68k-dis.c: Re-write to detect invalid operands before
5311 printing anything, so we can handle this the same way we
5312 handle invalid opcodes.
5314 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5316 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5318 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5320 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5323 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5325 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5327 * configure.in: Do make sysdep.h link.
5328 * Makefile.in: Search ../include. Don't search ../bfd.
5330 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5332 Changes from Jeff Law, law@cs.utah.edu:
5333 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5334 Do not print a space before the completers specified by
5337 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5339 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5340 defined, since gdb has been fixed.
5342 Changes from Jeff Law, law@cs.utah.edu:
5343 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5344 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5345 be a *disassemble_info, not a *FILE.
5346 * hppa-dis.c: Support 'd', '!', and 'a'.
5347 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5348 * hppa-dis.c: Delete cases which are no longer needed.
5350 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5352 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5354 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5356 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5359 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5361 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5362 * configure.in: No longer need to configure to get sysdep.h.
5364 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5366 * Patches from Jeffrey Law <law@cs.utah.edu>.
5367 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5368 templates for 1.1 FP computational instructions.
5370 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5372 * h8500-dis.c (print_insn_h8500): Address argument is type
5374 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5377 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5378 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5380 * sparc-dis.c (compare_opcodes): Move static declaration to
5383 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5385 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5386 instruction, remove unimp hack from 'l' argument.
5388 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5390 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5393 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5395 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5396 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5399 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5401 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5402 arrays of string pointers to 2-d arrays of chars, to save
5405 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5407 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5408 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5410 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5412 * hppa-dis.c: New file from Utah, adapted to new disassembler
5414 * Makefile.in: Include it.
5416 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5418 * sh-dis.c, sh-opc.h: New files.
5420 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5422 * alpha-dis.c, alpha-opc.h: New files.
5424 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5426 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5429 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5431 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5433 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5435 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5438 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5440 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5441 and double percent signs a few places.
5443 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5445 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5446 Use info->print_address_func not print_address.
5448 * dis-buf.c (generic_print_address): New function.
5450 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5452 * Makefile.in: Add sparc-dis.c.
5453 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5455 Add `add' instruction to the set that get checked
5456 for a preceding `sethi' in order to print an absolute address.
5457 * (print_insn): Disassembly prefers real instructions.
5458 (is_delayed_branch): Speed up.
5459 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5460 Still missing some float ops, and needs testing.
5461 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5462 F_ALIAS. Use printf, not fprintf, when not passing a file
5464 (compare_opcodes): Check that identical instructions have
5465 identical opcodes, complain otherwise.
5468 * Include reg_names.
5470 Use dis-asm.h/read_memory_func interface.
5472 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5474 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5475 deliberately return non-zero to setjmp from longjmp. Otherwise
5476 this code fails to compile.
5478 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5480 * m68k-dis.c: Fix prototype for fetch_arg().
5482 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5484 * dis-buf.c: New file, for new read_memory_func interface.
5485 Makefile.in (OFILES): Include it.
5486 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5487 Use new read_memory_func interface.
5489 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5491 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5492 * h8500-opc.h: Fix couple of opcodes.
5494 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5496 * Makefile.in: add dvi & installcheck targets
5498 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5500 * Makefile.in: Update for h8500-dis.c.
5502 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5504 * h8500-dis.c, h8500-opc.h: New files
5506 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5508 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5509 ../include/dis-asm.h.
5510 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5511 and ../gdb/m68k-pinsn.c).
5512 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5513 and ../gdb/i386-pinsn.c).
5514 * m68881-ext.c: New file. Moved definition of
5515 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5516 * Makefile.in: Adjust for new files.
5517 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5518 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5519 can be dis-assembled.
5521 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5523 * mips-dis.c (print_insn_arg): Now returns void.
5525 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5527 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5528 files that use the macros.
5530 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5532 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5533 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5534 (CFILES): Added mips-dis.c.
5536 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5538 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5539 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5541 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5543 * Makefile.in: Improve *clean rules.
5544 * configure.in: Allow a default host.
5546 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5548 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5549 files include other sysdep files
5551 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5553 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5555 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5557 * configure.in: For host support, use ../bfd/configure.host
5558 so it stays in sync with the ../bfd/hosts database.
5560 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5562 * configure.in: use cpu-vendor-os triple instead of nested cases
5564 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5566 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5567 *always* the wrong one.
5569 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5571 * z8kgen.c: added copyright info
5573 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5575 * z8k-dis.c (unparse_instr): prettier tabs
5576 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5578 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5580 * configure.in: Add ncr* configuration.
5581 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5582 picayune ANSI compilers happy.
5584 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5586 * configure.in (i386): Make i386 and i486 synonymous for now.
5587 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5589 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5591 * Makefile.in (install): Fix typo.
5593 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5595 * Makefile.in (make): Remove obsolete crud.
5596 (sparc-opc.o): Avoid Sun Make VPATH bug.
5598 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5600 * Makefile.in: since there are no SUBDIRS, remove rule and
5601 references of subdir_do.
5603 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5605 * Makefile.in (install): Get the library name right here too.
5606 Don't install bfd.h, since it's unrelated to this library. No
5607 subdirs to recurse into, either.
5608 (CFILES): The source file has a .c suffix, not .o.
5610 * sparc-opc.c: New file, moved from BFD.
5611 * Makefile.in (OFILES): Build it.
5613 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5615 * z8k-dis.c: fixed forward refferences of some declarations.
5617 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5619 * Makefile.in: get the name of the library right
5621 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5623 * z8k-dis.c: knows how to disassemble z8k stuff
5624 * z8k-opc.h: new file full of z8000 opcodes
5628 version-control: never
projects / platform / upstream / binutils.git / blob