1 Sat Aug 29 22:24:09 1998 Richard Henderson <rth@cygnus.com>
3 * alpha-dis.c (print_insn_alpha): Use the machine type to
4 decide which PALcode set to include.
6 Sun Aug 23 02:16:18 1998 Richard Henderson <rth@cygnus.com>
8 * sparc-opc.c (FBRX): Fix typo in ",a,pn %fcc3" case.
10 Fri Aug 21 16:07:52 1998 Nick Clifton <nickc@cygnus.com>
12 * d30v-opc.c (d30v_opcode_table): Add FLAG_MUL32 to MAC, MACS,
13 MSUB and MSUBS instructions.
16 Tue Aug 18 16:48:52 1998 Ian Lance Taylor <ian@cygnus.com>
18 * mips-opc.c: Insert contents of vu0.h, rather than including it.
20 * Makefile.am: Rebuild dependencies.
24 Thu Aug 13 16:23:04 1998 Ian Lance Taylor <ian@cygnus.com>
26 * ppc-opc.c (powerpc_operands): Omit parens around additions in
29 Wed Aug 12 14:00:38 1998 Ian Lance Taylor <ian@cygnus.com>
31 start-sanitize-coldfire
32 * m68k-opc.c: Correct divsl, divul, remsl, and remul for
33 ColdFire, as below for mulsl and mulul.
36 From Peter Jeremy <peter.jeremy@auss2.alcatel.com.au>:
37 * m68k-opc.c: Correct mulsl and mulul to use q rather than D, a,
38 +, -, and d for ColdFire.
40 From Peter Thiemann <thiemann@informatik.uni-tuebingen.de>:
41 * ppc-opc.c (insert_mbe): Handle wrapping bitmasks.
42 (extract_mbe): Likewise.
44 Wed Aug 12 11:11:34 1998 Jeffrey A Law (law@cygnus.com)
46 * m10300-opc.c: Fix typo in udf20 .. udf25 instruction opcodes.
48 * m10300-opc.c: First cut at UDF instructions.
50 Mon Aug 10 14:08:22 1998 Doug Evans <devans@canuck.cygnus.com>
52 * m32r-opc.c: Regenerate (remove semantic descriptions).
54 Mon Aug 10 12:51:12 1998 Catherine Moore <clm@cygnus.com>
56 * arm-dis.c (print_insn_big_arm): Fix indentation.
57 (print_insn_little_arm): Likewise.
59 Sun Aug 9 20:17:28 1998 Catherine Moore <clm@cygnus.com>
61 * arm-dis.c (print_insn_big_arm): Check for thumb symbol
63 (print_insn_little_arm): Likewise.
65 Mon Aug 3 12:43:16 1998 Doug Evans <devans@seba.cygnus.com>
67 Move all global state data into opcode table struct, and treat
68 opcode table as something that is "opened/closed".
69 * cgen-asm.c (all fns): New first arg of opcode table descriptor.
70 (cgen_asm_init): Delete.
71 (cgen_set_parse_operand_fn): New function.
72 * cgen-dis.c (all fns): New first arg of opcode table descriptor.
73 (cgen_dis_init): Delete.
74 * cgen-opc.c (all fns): New first arg of opcode table descriptor.
75 (cgen_current_{opcode_table_mach,endian}): Delete.
77 * cgen-asm.in (all fns): New first arg of opcode table descriptor.
78 * cgen-dis.in (all fns): Ditto.
79 * cgen-opc.in (all fns): Ditto.
81 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
84 * cgen-asm.in (parse_insn_normal): Ignore case in mnemonics.
86 * cgen-dis.in (print_normal): Split into two.
87 (print_address): New function.
88 (extract_insn_normal): Clarify insn_value arg.
89 (print_int_insn): Renamed from print_insn.
90 (print_insn): New arg.
91 (print_insn_@arch@): Open opcode table if not already done so.
92 Move reading of insn into print_insn.
95 Thu Jul 30 21:41:10 1998 Frank Ch. Eigler <fche@cygnus.com>
97 * d30v-opc.c (d30v_opcode_table): Add new "LKR" flag to some
101 Tue Jul 28 13:15:39 1998 Doug Evans <devans@canuck.cygnus.com>
103 Add support for new versions of mulwhi,mulwlo,macwhi,macwlo that
104 accept an accumulator choice.
105 * m32r-opc.c,m32r-opc.h: Regenerate.
108 Tue Jul 28 11:00:09 1998 Jeffrey A Law (law@cygnus.com)
110 * m10300-opc.c: Add entries for "no_match_operands" field in
114 Fri Jul 24 15:22:40 1998 Jeffrey A Law (law@cygnus.com)
116 * m10300-dis.c: Do not emit a comma before a PLUS (autoincrement)
120 Fri Jul 24 11:41:37 1998 Doug Evans <devans@canuck.cygnus.com>
122 * m32r-asm.c,m32r-opc.c: Regenerate (-Wall cleanups).
125 Thu Jul 23 09:21:03 1998 Jeffrey A Law (law@cygnus.com)
127 * m10300-opc.c: Add DSP autoincrement memory loads/stores.
129 * m10300-opc.c: Add autoincrement memory loads/stores.
133 Wed Jul 22 17:05:40 1998 Jeffrey A Law (law@cygnus.com)
135 * mips-opc.c: Make phmadh and phmsbh synonyms for phmaddh and
136 phmsubh respectively.
139 Tue Jul 21 13:41:07 1998 Doug Evans <devans@seba.cygnus.com>
141 start-sanitize-cygnus
142 * cgen-opc.in (@arch@_cgen_lookup_insn): Update call to
144 (@arch@_cgen_get_insn_operands): @arch@_cgen_get_operand renamed to
145 @arch_cgen_get_int_operand.
146 * cgen-asm.in (insert_insn_normal): New arg `pc', callers updated.
147 Update call to @arch@_cgen_insert_operand.
148 (@arch@_cgen_assemble_insn): Update call to CGEN_INSERT_FN.
149 * cgen-dis.in (print_normal): Delete use of CGEN_PCREL_OFFSET.
150 (extract_insn_normal): New arg `pc', callers updated.
151 Update call to @arch@_cgen_extract_operand.
152 (print_insn): Update call to CGEN_EXTRACT_FN.
154 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
157 Mon Jul 20 12:10:37 1998 Jeffrey A Law (law@cygnus.com)
159 * m10300-opc.c: Fix load to sp and store from sp for the am33.
160 Add more multimedia instructions.
162 Thu Jul 16 18:04:46 1998 Jeffrey A Law (law@cygnus.com)
164 * m10300-opc.c (mn10300_opcodes): Fix opcode for 4 operand "mul" and
169 Mon Jul 13 18:14:24 1998 Jeffrey A Law (law@cygnus.com)
171 * mips-opc.c (pref): Enabled for the r5900.
174 Mon Jul 13 14:53:59 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
176 * i386-dis.c (ckprefix): Handle fwait specially only when it isn't
178 (dofloat): Correct test for fnstsw. Print `fnstsw %ax' rather
180 (OP_J): Remove unnecessary subtraction when 16-bit displacement
181 will be masked later.
184 Fri Jul 10 23:09:56 1998 Jeffrey A Law (law@cygnus.com)
186 * m10300-opc.c (mn10300_opcodes): Fix destination operand for 3 operand
189 Wed Jul 8 11:32:44 1998 Jeffrey A Law (law@cygnus.com)
191 * m10300-dis.c (disassemble): When printing RREGs and XRREGs, map
192 from raw register #s to symbolic names to make debugging easier.
195 Thu Jul 2 17:11:27 1998 Doug Evans <devans@seba.cygnus.com>
197 * m32r-opc.h (CGEN_MIN_INSN_SIZE): New #define.
199 Wed Jul 1 16:11:16 1998 Doug Evans <devans@seba.cygnus.com>
201 * m32r-asm.c,m32r-dis.c,m32r-opc.c,m32r-opc.h: Regenerate.
202 start-sanitize-cygnus
203 * Makefile.am (CGENDIR): Set via configure.
204 (CGEN): New variable.
205 (CGENFILES): object.scm renamed to cos.scm.
206 (run-cgen): Renamed from cgen. stamp file renamed to stamp-$prefix.
207 (stamp-m32r): Pass prefix to run-cgen.
208 * Makefile.in: Regenerate.
209 * cgen-asm.in: @arch@-opc.h renamed to @prefix@-opc.h.
210 * cgen-dis.in: Ditto.
211 * cgen-opc.in: Ditto.
212 * cgen.sh: New args cgen,prefix. Delete args scheme,schemeflags.
213 * configure.in: AC_SUBST cgen,cgendir. No longer look for guile.
214 * configure: Regenerate.
218 Tue Jun 30 09:59:37 1998 Jeffrey A Law (law@cygnus.com)
220 * m10300-opc.c: Reorder "movbu" and "movhu" instructions too.
222 Mon Jun 29 14:54:32 1998 Jeffrey A Law (law@cygnus.com)
224 * m10300-opc.c: Reorder more instructions so that we do not
225 accidentally match a mn10300 instruction when we really
226 wanted an am33 instruction.
229 Fri Jun 26 11:08:55 1998 Jeffrey A Law (law@cygnus.com)
231 * m10300-dis.c: Only recognize instructions from the currently
233 * m10300-opc.c: Add field indicating the particular variant of
234 the mn10300 each instruction is available on.
236 Fri Jun 26 12:04:21 1998 Ian Lance Taylor <ian@cygnus.com>
238 * configure.in: For bfd_vax_arch, build vax-dis.lo.
239 * Makefile.am: Rebuild dependencies.
240 (CFILES): Add vax-dis.c.
241 (ALL_MACHINES): Add vax-dis.lo.
242 * aclocal.m4: Rebuild with current libtool.
243 * configure, Makefile.in: Rebuild.
245 Fri Jun 26 12:03:20 1998 Klaus Kaempf <kkaempf@progis.de>
247 * vax-dis.c: New file, from work by Pauline Middelink
248 <middelin@polyware.iaf.nl>.
249 * disassemble.c (ARCH_vax): Define if ARCH_all.
250 (disassembler): Add case for ARCH_vax.
251 * makefile.vms: Support compilation on vms/vax.
254 Wed Jun 24 17:14:01 1998 Ian Carmichael <iancarm@cygnus.com>
256 * dvp-opc.c (DVP_OPERAND_RELOC_11_S4): Temporarily back out
257 the DVP_OPERAND_RELOC_11_S4 relocation.
261 Wed Jun 24 09:53:06 1998 Jeffrey A Law (law@cygnus.com)
263 * m10300-dis.c (print_insn_mn10300): 0xf7 opcode prefix specifies
265 (disassemble): Correctly handle FMT_D10 instructions.
267 * m10300-opc.c (mn10300_opcodes): Fix typo in IMM24 versions of the
268 am33 shift instructions.
270 * m10300-dis.c (print_insn_mn10300): 0xf9 opcode prefix specifies
272 (disassemble): Handle new instruction formats FMT_D6, FMT_D7, FMT_D8
273 FMT_D9 and FMT_D10. Handle various new opcode flags for the am33.
275 * m10300-opc.c (IMM32_HIGH8_MEM): New operand type.
276 (mn10300_opcodes): Reorder so as to try and select opcodes from
277 the core chip when multiple alternatives exist. Change several
278 am33 instructions to use IMM32_HIGH8_MEM. Fix typos in "mac" and
279 "macbu" instructions. Fix typos in a couple DSP instructions too.
282 Tue Jun 23 19:42:18 1998 Mark Alexander <marka@cygnus.com>
284 * m10200-dis.c (print_insn_mn10200): Fix various non-portabilities
285 related to sign extension and the size of ints.
287 Tue Jun 23 10:59:26 1998 Jeffrey A Law (law@cygnus.com)
289 * m10300-opc.c: Support one operand "asr", "lsr" and "asl"
290 instructions. Support (sp) addressing mode by expanding it into
294 Mon Jun 22 15:48:29 1998 Ian Carmichael <iancarm@cygnus.com>
296 * dvp-opc.c (LIMM11, LUIMM15): New symbol types
297 DVP_OPERAND_RELOC_U15_S3 and DVP_OPERAND_RELOC_11_S4 to allow labels to
298 be used as immediate values.
302 Mon Jun 22 13:36:27 1998 Jeffrey A Law (law@cygnus.com)
304 * m10300-opc.c: Support 4 byte DSP instructions.
307 Sat Jun 20 14:46:20 1998 Frank Ch. Eigler <fche@cygnus.com>
309 * mips-dis.c (_print_insn_mips): Fix argument interchange typo.
312 Fri Jun 19 16:47:06 1998 Jeffrey A Law (law@cygnus.com)
314 * m10300-opc.c: Support 6 and 7 byte am33 instructions.
317 Fri Jun 19 09:16:42 1998 Mark Alexander <marka@cygnus.com>
319 * m10200-dis.c (print_insn_mn10200): Recognize 'break' pseudo-op.
322 Fri Jun 19 09:42:51 1998 Jeffrey A Law (law@cygnus.com)
324 * m10300-opc.c: Support for 3 byte and 4 byte extended instructions
325 found on the mn10300.
328 1998-06-18 Ulrich Drepper <drepper@cygnus.com>
330 * i386-dis.c: Add support for fxsave, fxrstor, sysenter and
333 Thu Jun 18 10:22:24 1998 John Metzler <jmetzler@cygnus.com>
335 * mips-dis.c (print_insn_little_mips): Previously, instruction
336 printing references the symbol table to determine whether the
337 instruction resides in a block regular instructions or mips16
338 instructions. However, when the disassembler gets used in other
339 environments where the symbol table is not present, we no longer
340 rely in the symbol table, rather, use the low bit of the
341 instructions address to guess. There should be no change for usage
342 of the disassembler in host based programse, gdb ,objdump.
343 (print_insn_big_mips): ditto.
344 (print_insn_mips): ditto
346 Wed Jun 17 21:19:01 1998 Mark Alexander <marka@cygnus.com>
348 * m10200-dis.c (print_insn_mn10200): Don't bomb on unknown opcodes.
350 Wed Jun 17 17:49:23 1998 Jeffrey A Law (law@cygnus.com)
353 * m10300-opc.c (USP, SSP, MSP, PC, IMM4, EPSW, RN0, RM1): New
354 operands for the am33.
355 (mn10300_opcodes): Add new instructions from the am33.
357 * m10300-opc.c (mn10300_opcodes): Change opcode for "syscall".
359 Tue Jun 16 13:10:51 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
361 * i386-dis.c (index16): Add '%' to register names. Use ','
364 Sat Jun 13 11:33:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
366 * i386-dis.c: Don't print opcode suffix when we can figure out the
367 size (and gas can!) by register operands, or from the default
369 (putop): Handle 'A', 'B', 'L', 'P', 'Q', 'R' macros. Rename 'C'
371 (dis386, dis386_twobyte, grps): Use new suffix macros.
372 (dis386): Correct imul Ib to imul sIb. Change jnl to jge to be
373 consistent. Add suffix for call, jmp, lcall, ljmp, iret. Reverse
374 order of cmps operands to agree with Intel docs. Correct operand
375 of aad and aam (Ib -> sIb). Change ud2b from 0fb8 to 0fb9 to
376 agree with Intel docs.
377 (print_insn_x86): Print orphan fwait before other prefixes.
378 Return correct byte count for orphan fwait with prefixes. Don't
379 print `bound' operands in reverse order.
380 (ckprefix): Stop accumulating prefixes if we get fwait.
381 (OP_DIR): Print `$' before Ap operands of ljmp, lcall.
383 Fri Jun 12 13:40:38 1998 Tom Tromey <tromey@cygnus.com>
385 * po/Make-in (all-yes): If maintainer mode, depend on .pot file.
386 ($(PACKAGE).pot): Unconditionally depend on POTFILES.
388 Fri Jun 12 11:04:06 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
390 Fix problems when bfd_vma is wider than long.
391 * i386-dis.c: Make op_address and start_pc unsigned.
392 (set_op): Make parameter unsigned.
393 (print_insn_x86): Cast to bfd_vma when passing a value to
395 * ns32k-dis.c (CORE_ADDR): Don't define.
396 (print_insn_ns32k): Change type of addr to bfd_vma. Use
397 bfd_scan_vma to read back address.
398 (print_insn_arg): Change type of addr to bfd_vma. Use sprintf_vma
400 * m68k-dis.c (COERCE32): Cast to bfd_signed_vma to avoid overflow.
401 (NEXTULONG): New definition.
402 (print_insn_m68k): Avoid overflow when computing third argument of
404 (print_insn_arg): Use NEXTULONG to fetch 32 bit address values.
405 Use disp instead of val to store offset values.
406 (print_indexed): Use base_disp instead of word to store base
407 displacement, to avoid overflow.
408 * m10300-dis.c (disassemble): Cast value to long when computing
409 pc-relative address, to get correct sign extension.
411 Wed Jun 10 15:58:37 1998 Doug Evans <devans@canuck.cygnus.com>
413 * m32r-opc.c: Regenerate.
415 Tue Jun 9 14:27:57 1998 Nick Clifton <nickc@cygnus.com>
417 * arm-opc.h (thumb_opcodes): Display 'add rx, rY, #0' insns as
418 'mov rX, rY'. Patch courtesy of Tony Thompson <Tony.Thompson@arm.com>
420 Mon Jun 8 18:17:21 1998 Nick Clifton <nickc@cygnus.com>
422 * d30v-opc.c: Remove FALG_MUL32 attribyte from MULX2H insn.
424 Fri Jun 5 23:47:55 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
426 * i386-dis.c: Combine aflag and dflag into sizeflag. Change OP_*
428 (OP_DSreg): Rename from OP_DSSI.
429 (OP_ESreg): Rename from OP_ESDI.
430 (Xb, Xv, Yb, Yv): Use index reg code, not b_mode or v_mode.
432 (append_seg): Rename from append_prefix.
433 (ptr_reg): New function.
434 (dis386): Add S suffix to pushf, popf, ret, lret, enter, leave.
436 (PREFIX_ADDR): Rename from PREFIX_ADR.
437 (float_reg): Add non-broken opcodes for people who don't want
440 Fri Jun 5 19:15:04 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
442 * m68k-opc.c (tstb, tstw, tstl): Don't allow pcrel on
445 Wed Jun 3 18:56:22 1998 H.J. Lu <hjl@gnu.org>
447 * i386-dis.c (dis386): Change 0x60 to "pushaS", 0x61 to "popaS".
449 Tue Jun 2 15:06:46 1998 Geoff Keating <geoffk@ozemail.com.au>
451 * ppc-opc.c (powerpc_macros): Support shifts and rotates of size
452 0; produce error message for shifts of size 32 (or 64 for 64-bit
453 shifts), because the hardware doesn't support them.
456 Mon Jun 1 10:27:26 1998 Jeffrey A Law (law@cygnus.com)
458 * mips-opc.c (c.lt.s): Remove r5900 specific variant.
461 * vu0.h (sqc2): Fix opcode.
463 * mips-opc.c (rsqrt.s): Update based on r5900 ISA manual version 2.1
467 start-sanitize-cygnus
468 Thu May 28 08:46:09 1998 Catherine Moore <clm@cygnus.com>
470 * mips-opc.c (macc, maccu, macchi, macchiu, msac, msacu, msachi, msachiu):
471 Change pinfo to use WR_HILO.
474 Wed May 27 15:29:13 1998 Nick Clifton <nickc@cygnus.com>
476 * d30v-opc.c: Add new operand: Ra3. Change SHORT_B3, SHORT_B3b,
477 LONG_2, LONG_2b formats to use this new operand.
479 Tue May 26 20:47:48 1998 Stan Cox <scox@cygnus.com>
481 * sparc-dis.c (compute_arch_mask): Added bfd_mach_sparc_sparclite_le.
483 Tue May 26 20:45:33 1998 Mark Alexander <marka@cygnus.com>
485 * sparc-dis.c (print_insn_sparc): big endian instruction / little
488 Tue May 26 16:14:39 1998 Nick Clifton <nickc@cygnus.com>
490 * d30v-opc.c (d30v_format_table): Change definition of SHORT_B3
491 and SHORT_B3b formats to use Rb instead of Ra.
493 Add FLAG_MUL16 to MUL2XH opcode.
495 Add FLAG_ADDSUBppp to SRC and SATHp opcodes to implement extension
496 to existing 1.1.1 parallelisation prohibition procedure.
498 Fri May 22 16:00:00 1998 Doug Evans <devans@canuck.cygnus.com>
500 * cgen-asm.in (insert_normal): Handle empty fields and 64 bit hosts.
501 * cgen-dis.in (extract_normal): Likewise.
502 * m32r-asm.c,m32r-dis.c: Regenerate.
505 Fri May 22 11:44:10 1998 Doug Evans <devans@canuck.cygnus.com>
507 * dvp-opc.c (parse_dotdest): Missing dest -> xyzw.
511 Wed May 20 00:22:27 1998 Jeffrey A Law (law@cygnus.com)
513 * mips-opc.c (multu1): Add two operand variant for the r5900.
516 Tue May 19 17:36:08 1998 Ian Lance Taylor <ian@cygnus.com>
518 * mips-dis.c (print_mips16_insn_arg): Handle type ']' correctly
519 with a shift count of 0.
522 Mon May 18 14:27:06 1998 Frank Ch. Eigler <fche@cygnus.com>
524 * mips-opc.c (mult1): Add two-operand variety of mult1 for R5900.
526 Mon May 18 11:44:00 1998 Jeffrey A Law (law@cygnus.com)
528 * mips-dis.c (print_insn_arg): Handle ';' opcode completer.
529 (_print_insn_mips): Likewise.
530 * vu0.h (vopmula, vopmsub): Correctly handle opcode/operand
534 Fri May 15 14:58:31 1998 Doug Evans <devans@seba.cygnus.com>
536 * cgen-opc.c (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
537 (cgen_hw_lookup_by_num): New function.
540 * m32r-opc.c, m32r-opc.h: Regenerate, delete h-abort.
543 Wed May 13 17:03:59 1998 Doug Evans <devans@canuck.cygnus.com>
545 * m32r-asm.c: Regenerate (handle uppercase HIGH/SHIGH/LOW/SDA).
547 Wed May 13 14:34:31 1998 Mark Alexander <marka@cygnus.com>
549 * sparc-dis.c (print_insn_sparc): Always fetch instructions
550 as big-endian on SPARClite.
553 Tue May 12 13:39:51 1998 Nick Clifton <nickc@cygnus.com>
555 * m32r-opc.c: Regenerated - SPECIAL attribute added to some
557 * m32r-opc.h: Regenerated - SPECIAL attribute added to some
561 Tue May 12 11:46:31 1998 Richard Henderson <rth@cygnus.com>
563 * d30v-opc.c (pre_defined_register): Remove alias for r0.
566 Mon May 11 13:12:15 1998 Frank Ch. Eigler <fche@cygnus.com>
568 * mips-opc.c (break): Added 20-bit single-operand break
569 instruction for R5900 only.
572 Sun May 10 22:37:22 1998 Jeffrey A Law (law@cygnus.com)
574 * po/Make-in (install-info): New target.
576 Thu May 7 17:15:59 1998 Ian Lance Taylor <ian@cygnus.com>
578 * configure.in (WIN32LIBADD): Add -lintl on cygwin32.
579 * configure: Rebuild.
581 Thu May 7 12:49:46 1998 Frank Ch. Eigler <fche@cygnus.com>
583 * mips-opc.c (teq,tge,tgeu,tlt,tltu,tne): Added three-operand
584 variety of ISA2 instructions to set bottom ten bits of trap code.
586 Thu May 7 11:54:25 1998 Ian Lance Taylor <ian@cygnus.com>
588 * Makefile.am (config.status): Add explicit target so that
589 config.status depends upon bfd/configure.in.
590 * Makefile.in: Rebuild.
592 Thu May 7 09:33:02 1998 Frank Ch. Eigler <fche@cygnus.com>
594 * mips-opc.c (break, sdbbp): Added two-operand variety of ISA1
595 instructions to set bottom ten bits of break code.
596 * mips-dis.c (print_insn_arg): Implement 'q' operand format used
597 for above optional argument.
599 start-sanitize-cygnus
600 Wed May 6 14:47:17 1998 Doug Evans <devans@seba.cygnus.com>
602 * cgen.sh: s/@ARCH@/${ARCH}/ in opc.h generation.
603 * m32r-opc.h: Regenerate.
606 Wed May 6 15:30:06 1998 Klaus Kaempf <kkaempf@progis.de>
608 * makefile.vms: Run dec c with /nodebug.
610 Mon May 4 10:19:57 1998 Tom Tromey <tromey@cygnus.com>
612 * Makefile.in: Rebuilt.
613 * Makefile.am: Regenerated dependencies with mkdep.
615 * opintl.h (_): Define as dgettext.
617 start-sanitize-cygnus
618 Fri May 1 13:47:42 1998 Doug Evans <devans@canuck.cygnus.com>
620 * configure.in: Add support for --enable-cgen-maint.
621 * Makefile.am (M32R_DEPS): New variable.
622 (m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c): Update dependencies.
623 * aclocal.m4: Regenerate.
624 * Makefile.in: Regenerate.
625 * configure: Regenerate.
627 * Makefile.am (CGENFILES): Add minsn.scm.
630 Tue Apr 28 14:12:12 1998 Nick Clifton <nickc@cygnus.com>
632 * cgen-asm.c: Internationalised.
633 start-sanitize-cygnus
634 * cgen-asm.in: Internationalised.
635 * cgen-opc.in: Internationalised.
637 * m32r-asm.c: Internationalised.
638 * m32r-dis.c: Internationalised.
639 * m32r-opc.c: Internationalised.
641 * aclocal.m4: Regenerated.
642 * configure: Regenerated.
643 * Makefile.am (POTFILES): Remove inclusion of BFD_H.
644 * Makefile.in: Rebuild.
645 * po/POTFILES.in: Rebuilt using rule in Makefile.in.
646 * po/opcodes.pot: Rebuilt after changing POTFILES.in.
648 Tue Apr 28 13:13:13 1998 Ian Lance Taylor <ian@cygnus.com>
650 * configure.in: Call AC_ISC_POSIX near start. Move CY_GNU_GETTEXT
652 * aclocal.m4, configure: Rebuild with current tools.
654 Mon Apr 27 14:31:00 1998 Nick Clifton <nickc@cygnus.com>
656 * opintl.h: New file - contains internationalisation macros used
657 by source files in this directory.
658 * po/: New subdirectory - contains internationalisation files.
659 * po/Make-in: New file - Makefile constructor.
660 * po/POTFILES.in: New file - list of files in opcodes directory
661 that should be scan for internationalisation macros.
662 * po/opcodes.pot: New file - list of internationisation strings
663 found in files mentioned in po/POTFILES.in.
664 * Makefile.am: Add rule to build po/POTFILES.in. Add SUBDIRS
665 entry. Add intl directory to include paths.
666 * acconfig.h: Add ENABLE_NLS, HAVE_CATGETS, HAVE_GETEXT,
667 HAVE_STRCPY, HAVE_LC_MESSAGES
668 * configure.in: Add rule to build Makefile in po subdirectory.
669 * Makefile.in: Rebuilt.
670 * aclocal.m4: Rebuilt.
671 * config.in: Rebuilt.
672 * configure: Rebuilt.
673 * alpha-opc.c: Internationalised.
674 * arc-dis.c: Internationalised.
675 * arc-opc.c: Internationalised.
676 * arm-dis.c: Internationalised.
677 * cgen-asm.c: Internationalised.
678 * d30v-dis.c: Internationalised.
679 * dis-buf.c: Internationalised.
681 * dvp-dis.c: Internationalised.
682 * dvp-opc.c: Internationalised.
684 * h8300-dis.c: Internationalised.
685 * h8500-dis.c: Internationalised.
686 * i386-dis.c: Internationalised.
687 * m10200-dis.c: Internationalised.
688 * m10300-dis.c: Internationalised.
689 * m68k-dis.c: Internationalised.
690 * m88k-dis.c: Internationalised.
691 * mips-dis.c: Internationalised.
692 * ns32k-dis.c: Internationalised.
693 * opintl.h: Internationalised.
694 * ppc-opc.c: Internationalised.
695 * sparc-dis.c: Internationalised.
696 * v850-dis.c: Internationalised.
697 * v850-opc.c: Internationalised.
699 Mon Apr 27 10:33:56 1998 Doug Evans <devans@seba.cygnus.com>
701 * cgen-asm.c (cgen_current_opcode_table): Renamed from ..._data.
702 (asm_hash_table_entries): New variable.
703 (cgen_asm_init): Free asm_hash_table_entries.
704 (hash_insn_array,hash_insn_list): New functions.
705 (build_asm_hash_table): Use them. Hash macro insns as well.
706 (cgen_asm_lookup_insn): Update.
707 * cgen_dis.c (cgen_current_opcode_table): Renamed from ..._data.
708 (dis_hash_table_entries): New variable.
709 (cgen_dis_init): Free dis_hash_table_entries.
710 (hash_insn_array,hash_insn_list): New functions.
711 (build_dis_hash_table): Use them. Hash macro insns as well.
712 (cgen_dis_lookup_insn): Update.
713 * cgen-opc.c (cgen_current_opcode_table): Renamed from ..._data.
714 (cgen_set_cpu,cgen_hw_lookup,cgen_insn_count): Update.
715 (cgen_macro_insn_count): New function.
716 * cgen-opc.in (@arch@_cgen_lookup_insn): New arg alias_p.
717 All callers updated. Sanity check result of extract fn.
718 (@arch@_cgen_get_insn_operands): Change result type to void.
719 Delete args insn_value, length. New arg fields. All callers updated.
720 (@arch@_cgen_lookup_get_insn_operands): New function.
721 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
723 Fri Apr 24 16:07:57 1998 Alan Modra <alan@spri.levels.unisa.edu.au>
725 * i386-dis.c (OP_DSSI): Print segment override.
728 Thu Apr 23 12:32:07 1998 Frank Ch. Eigler <fche@cygnus.com>
730 * mips-opc.c (msub.s): Correct mask pattern for disassembly.
734 Mon Apr 20 19:11:55 1998 Frank Ch. Eigler <fche@cygnus.com>
736 * mips-opc.c (madd.s): Correct mask pattern for disassembly.
740 Sat Apr 18 00:29:18 1998 Jeffrey A Law (law@cygnus.com)
742 * vu0.h (vlqd, vlqi): Update per revised specs.
746 Thu Apr 16 11:44:59 1998 Doug Evans <devans@canuck.cygnus.com>
748 * dvp-opc.c (parse_vif_unpackloc,insert_vif_unpackloc): Delete.
749 (vif_operands): Update.
750 (vif_get_unpackloc): Delete.
751 (state_vif_unpackloc{,_star_p}): Delete.
752 (dvp_opcode_init_parse): Update.
753 (vif_unpack_len_value): Avoid divide by zero.
757 Wed Apr 15 10:30:07 1998 Frank Ch. Eigler <fche@cygnus.com>
759 * vu0.h: Specs changed for VCALLMSR bit pattern.
760 * mips-dis.c: (print_insn_arg) Matching change.
763 Mon Apr 13 16:59:39 1998 Nick Clifton <nickc@cygnus.com>
765 * arm-dis.c (print_insn_arm): Add "_all" extension to 'C'
768 Mon Apr 13 16:50:27 1998 Ian Lance Taylor <ian@cygnus.com>
770 * Makefile.am (libopcodes_la_LIBADD): Add @WIN32LIBADD@.
771 (libopcodes_la_LDFLAGS): Add @WIN32LDFLAGS@.
772 * configure.in: Define and substitute WIN32LDFLAGS and
774 * aclocal.m4: Rebuild with new libtool.
775 * configure, Makefile.in: Rebuild.
778 Mon Apr 13 16:02:02 1998 Frank Ch. Eigler <fche@cygnus.com>
780 * vu0.h: Corrected bit pattern for VMAXI opcode.
783 Fri Apr 10 18:14:31 1998 Doug Evans <devans@canuck.cygnus.com>
785 * m32r-opc.c: Regenerate.
788 Mon Apr 6 17:16:48 1998 Doug Evans <devans@canuck.cygnus.com>
790 * dvp-opc.c (vif_macros): Tweak unpackloc operand.
791 (dvp_expand_macro): Implement.
792 (insert_vif_datalen): Record value with max+1 -> 0 conversion.
793 (vif_unpack_len): Perform 0 -> max+1 conversion on `wl' value.
796 Sun Apr 5 16:04:39 1998 H.J. Lu <hjl@gnu.org>
798 * Makefile.am (stamp-lib): Check that .libs/libopcodes.a exists
799 before trying to copy it.
800 * Makefile.in: Rebuild.
802 Thu Apr 2 17:25:49 1998 Nick Clifton <nickc@cygnus.com>
804 * m32r-opc.c: Use signed immediate values for CMPUI instruction.
807 Thu Apr 2 16:44:23 1998 Nick Clifton <nickc@cygnus.com>
809 * m32r-opc.c: Fix bit patterns for SAT and SATB.
812 Wed Apr 1 16:20:27 1998 Ian Dall <Ian.Dall@dsto.defence.gov.au>
814 * ns32k-dis.c (bit_extract_simple): New function to extract bits
815 from an arbitrary valid buffer instead of fetching them on demand
817 (invalid_float): use bit_extract_simple() instead of bit_extract().
820 Wed Apr 1 14:57:54 1998 Nick Clifton <nickc@cygnus.com>
822 * m32r-opc.c: Fix SATB bit pattern. Add extra control registers.
823 * m32r-opc.h: Add extra control registers.
826 Tue Mar 31 11:09:08 1998 Ian Lance Taylor <ian@cygnus.com>
828 From H.J. Lu <hjl@gnu.org>:
829 * i386-dis.c (dis386): Change 0x8c and 0x8e to movS, and change Ew
832 Mon Mar 30 17:32:03 1998 Ian Lance Taylor <ian@cygnus.com>
834 * Branched binutils 2.9.
836 Mon Mar 30 15:18:00 1998 Ken Raeburn <raeburn@cygnus.com>
838 * d30v-dis.c (print_insn_d30v): Don't use uninitialized "num" when
839 disassembling last 4 bytes of a section.
841 Fri Mar 27 18:08:13 1998 Ian Lance Taylor <ian@cygnus.com>
843 Fix some gcc -Wall warnings:
844 * arc-dis.c (print_insn): Add casts to avoid warnings.
845 * cgen-opc.c (cgen_keyword_lookup_name): Likewise.
846 * d10v-dis.c (dis_long, dis_2_short): Likewise.
848 * dvp-opc.c (issymchar, SKIP_BLANKS): Likewise.
849 (parse_dotdest, parse_dotdest1, u_parse_sdest): Likewise.
850 (parse_bc, parse_vfreg, parse_accdest): Likewise.
851 (parse_ffstreg, parse_vif_mode): Likewise.
853 * m10200-dis.c (disassemble): Likewise.
854 * m10300-dis.c (disassemble): Likewise.
855 * ns32k-dis.c (print_insn_ns32k): Likewise.
856 * ppc-opc.c (insert_ral, insert_ram): Likewise.
857 * cgen-dis.c (build_dis_hash_table): Remove used local variables.
858 * cgen-opc.c (cgen_keyword_search_next): Likewise.
859 * d10v-dis.c (dis_long, dis_2_short): Likewise.
860 * d30v-dis.c (print_insn_d30v, lookup_opcode): Likewise.
862 * dvp-dis.c (print_dma, print_vif, print_gif): Likewise.
863 * dvp-opc.c (parse_dest1, print_uflags): Likewise.
864 (parse_gif_nloop, dvp_opcode_init_tables): Likewise.
866 * ns32k-dis.c (bit_extract, print_insn_ns32k): Likewise.
868 * tic80-dis.c (print_one_instruction): Likewise.
870 * w65-dis.c (print_operand): Likewise.
871 * z8k-dis.c (fetch_data): Likewise.
872 * a29k-dis.c: Add return type for find_byte_func_type.
873 * arc-opc.c: Include <stdio.h>. Remove declarations of
874 insert_multshift and extract_multshift.
875 * d30v-dis.c (lookup_opcode): Parenthesize assignments in
877 (extract_value): Fully parenthesize expression.
879 * dvp-opc.c: Include <ctype.h>.
880 (print_sdest): Add default case to switch.
882 * h8500-dis.c (print_insn_h8500): Initialize local variables.
883 * h8500-opc.h (h8500_table): Fully bracket initializer.
884 * w65-opc.h (optable): Likewise.
885 * i386-dis.c (print_insn_x86): Declare aflag and flag parameters.
886 * i386-dis.c (OP_E): Initialize local variables.
887 * m10200-dis.c (print_insn_mn10200): Likewise.
888 * mips-dis.c (print_insn_mips16): Likewise.
889 * sh-dis.c (print_insn_shx): Likewise.
890 * v850-dis.c (print_insn_v850): Likewise.
891 * ns32k-dis.c (print_insn_arg): Declare.
892 (get_displacement, invalid_float): Declare.
893 (list_search, sign_extend, flip_bytes): Declare return type.
894 (get_displacement): Likewise.
895 (print_insn_arg): Likewise. Make d int. Fix sprintf format
897 (print_insn_ns32k): Make i unsigned.
898 (invalid_float): Make static. Declare type of val.
899 * tic30-dis.c (print_par_insn): Make i size_t. Don't check strlen
900 on each for iteration.
901 * tic30-dis.c (get_indirect_operand): Likewise.
902 * z8k-dis.c (print_insn_z8001): Declare return type.
903 (print_insn_z8002): Likewise.
904 (unparse_instr): Fix sprintf format strings.
906 Fri Mar 27 00:05:23 1998 Jeffrey A Law (law@cygnus.com)
908 * mips-opc.c: Add "sync.l" and "sync.p".
911 Thu Mar 26 13:27:37 1998 Doug Evans <devans@canuck.cygnus.com>
913 * dvp-opc.c (extract_vif_datalen): Rewrite.
914 (vif_insn_len): Perform 0->max+1 conversion for direct length.
916 Wed Mar 25 13:32:36 1998 Doug Evans <devans@canuck.cygnus.com>
918 * dvp-dis.c (print_insn): Print unpack address in hex.
919 * dvp-opc.c (parse_vif_mpgloc): Renamed from parse_vif_mpgloc_star.
920 Don't skip over '*', just record it.
921 (insert_vif_mpgloc): Don't update state_vif_mpgloc if '*' value.
922 (parse_vif_unpackloc): Renamed from parse_vif_unpackloc_star.
923 Don't skip over '*', just record it.
924 (insert_vif_unpackloc): Don't update state_vif_unpackloc if '*' value.
925 (vif_operands): Delete VIF_MPGLOC_STAR,VIF_UNPACKLOC_STAR entries.
926 (vif_opcodes): Likewise.
927 (state_vif_{mpg,unpack}loc_star_p): New static locals.
928 (vif_macros,vif_macro_count): New globals.
929 (vif_unpack_len_value): New arguments wl,cl. All callers updated.
930 (vif_set_{mpg,unpack}loc): Delete. All callers updated.
931 (vif_get_wl_cl): New function.
932 (dvp_opcode_init_parse): Init mpgloc,unpackloc state.
935 Wed Mar 25 14:32:48 1998 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
937 * m68k-dis.c (print_insn_m68k): Use info->mach to select the
938 default m68k variant to recognize.
940 * i960-dis.c (pinsn): Change type of first argument to bfd_vma.
941 (ctrl, cobr, mem, ea): Likewise.
942 (print_addr): Likewise. Remove cast.
943 (ea): Cast argument of print_addr to bfd_vma.
945 * cgen-asm.c (cgen_parse_signed_integer): Fix type of local
947 (cgen_parse_unsigned_integer): Likewise.
948 (cgen_parse_address): Likewise.
950 Wed Mar 25 14:31:31 1998 Ian Lance Taylor <ian@cygnus.com>
952 * i960-dis.c (ctrl): Add full braces to structure initialization.
953 (cobr, mem, reg): Likewise.
954 (ea): Correct parenthesization in expression.
956 * cgen-asm.c: Include <ctype.h>.
957 (build_asm_hash_table): Remove unused local variable i.
958 (cgen_parse_keyword): Add casts to avoid warnings.
960 * arm-dis.c (print_insn_big_arm): Only call coffsymbol for a COFF
961 symbol. Fix indentation.
962 (print_insn_little_arm): Likewise.
965 Tue Mar 24 18:11:13 1998 Jeffrey A Law (law@cygnus.com)
967 * vu0.h (cfc2, ctc2): Add variants with ".i" and ".ni"
972 Mon Mar 23 11:32:11 1998 Nick Clifton <nickc@cygnus.com>
974 * m32r-opc.c (m32r_cgen_insn_table_entries): Fix SATH bit pattern
979 Mon Mar 23 09:45:04 1998 Doug Evans <devans@canuck.cygnus.com>
981 * dvp-opc.c (vif_operand_datalen_special): New global.
985 Sun Mar 22 13:00:14 1998 Jeffrey A Law (law@cygnus.com)
987 * vu0.h (vcallms): Use 'O' for call target operand.
988 * mips-dis.c (print_insn_arg): Handle 'O'.
991 Fri Mar 20 18:55:18 1998 Ian Lance Taylor <ian@cygnus.com>
993 * configure.in: Use AM_DISABLE_SHARED.
994 * aclocal.m4, configure: Rebuild with libtool 1.2.
997 Fri Mar 20 09:01:31 1998 Jeffrey A Law (law@cygnus.com)
999 * mips-dis.c: Change '%' to '#' in r5900 support.
1003 Thu Mar 19 15:46:53 1998 Nick Clifton <nickc@cygnus.com>
1005 These patches are courtesy of Jonathan Walton and Tony Thompson
1006 (athompso@cambridge.arm.com).
1008 * arm-dis.c (print_insn_thumb): Ignore bottom two bits of PC
1011 * arm-opc.h (thumb_opcodes): Annotate PC relative addresses with
1012 both the offset and the label closest to the destination.
1014 start-sanitize-r5900
1015 Thu Mar 19 13:53:25 1998 Jeffrey A Law (law@cygnus.com)
1017 * vu0.h: New file with cop2/vu0 instructions.
1018 * mips-opc.c: Include vu0.h.
1019 * mips-dis.c (print_insn_arg): Handle new args 0-9, +, -, %, K, &,
1021 (print_insn_mips): Do not emit a tab after an instruction if the
1022 first arg is an instruction completer (&). If the next arg is an
1023 escape character (%), then print the next arg verbatim.
1024 * Makefile.am (mips-opc.lo): Depend on vu0.h
1028 Thu Mar 19 10:42:51 1998 Doug Evans <devans@canuck.cygnus.com>
1030 * dvp-opc.c (vif_opcodes): Add stcycl.
1032 Tue Mar 17 10:53:58 1998 Doug Evans <devans@canuck.cygnus.com>
1034 * dvp-dis.c (print_dma): Change length from 16 to 8.
1037 Sat Mar 14 23:47:14 1998 Doug Evans <devans@seba.cygnus.com>
1039 * m32r-opc.h: Regenerate.
1042 Thu Mar 12 09:18:54 1998 Doug Evans <devans@canuck.cygnus.com>
1044 * dvp-opc.c (print_dest1): Print dest spec again.
1045 (print_vfreg,print_accdest): Likewise.
1046 (vif_unpack_len): Round result up to word boundary.
1049 start-sanitize-vr4320
1050 Tue Mar 10 15:57:23 1998 Gavin Koch <gavin@cygnus.com>
1052 * mips-opc.c ("clz","dclz"): Added the 4320 versions.
1054 Mon Mar 9 15:22:06 1998 Gavin Koch <gavin@cygnus.com>
1056 * mips-opc.c ("macc*","mul*"): Added the 4320 versions
1061 Fri Mar 6 11:27:53 1998 Doug Evans <devans@canuck.cygnus.com>
1063 * dvp-dis.c (print_gif): Fix length calcs for gifimage.
1064 (print_insn): Do mask comparison on proper opcode word.
1065 Print unsigned values in hex.
1066 * dvp-opc.c (u_parse_sdest): Return -1 if dest missing.
1067 (parse_bc): Catch missing dest.
1068 (parse_vfreg): Replace atoi call with strtol.
1069 (parse_{bcftreg,ffstreg,freg,ireg,vi01,gif_prim,gif_nloop}): Likewise.
1070 (parse_bcftreg,parse_ffstreg): Handle missing dest.
1071 (extract_gif_eop): New function.
1072 (gif_operands): Update eop entry.
1073 (VGIFOP,VGIFNREGS): Fix calcs.
1074 (extract_gif_prim): Set *pinvalid to 1 if prim not used.
1075 (gif_regs): Add entry for unused 11 case.
1076 (print_gif_regs): Print empty list instead of nothing.
1077 (extract_gif_nloop): Fix value calc.
1078 (print_gif_nloop): Always print value, even if 0.
1079 (insert_vif_wlcl,extract_vif_wlcl): New functions.
1080 (vif_operands): Use them for wl,cl fields.
1081 (state_vif_wl,state_vif_cl): New static locals.
1082 (parse_vif_mode): Handle numeric args.
1083 (vif_unpack_len_value,vif_unpack_len): New functions.
1084 (vif_insn_len): Call vif_unpack_len.
1087 Wed Mar 4 12:08:14 1998 Doug Evans <devans@canuck.cygnus.com>
1089 * m32r-opc.h,m32r-opc.c,m32r-asm.c,m32r-dis.c: Regenerate.
1091 Tue Mar 3 18:51:22 1998 Doug Evans <devans@seba.cygnus.com>
1093 * cgen-asm.in: Move insertion of generated routines to top of file.
1094 (insert_normal): Add prototype. Delete `shift' arg.
1095 * cgen-dis.in: Move insertion of generated routines to top of file.
1096 (extract_normal): Add prototype. Delete `shift' arg.
1097 (print_normal): Add prototype. Call CGEN_PRINT_NORMAL if defined.
1098 (print_keyword): Add prototype. Fix type of `attrs' arg.
1100 start-sanitize-vr4320
1101 Tue Mar 3 11:47:58 1998 Gavin Koch <gavin@cygnus.com>
1103 * mips-dis.c (_print_insn_mips) : Handle bfd_mach_mips4320.
1104 * mips-opc.c ("mac","dmac") : Added 4320 insns.
1107 Sat Feb 28 16:02:34 1998 Nick Clifton <nickc@cygnus.com>
1109 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Do not
1110 assume that info->symbols is non-empty.
1112 Sat Feb 28 12:19:05 1998 Richard Henderson <rth@cygnus.com>
1114 * alpha-opc.c (cvtqs) There is no such thing.
1115 (cvttq): Missing most of the /*d variants.
1117 start-sanitize-r5900
1118 Fri Feb 27 13:16:42 1998 Andrew Cagney <cagney@b1.cygnus.com>
1120 * mips-opc.c (r5900/madd.s): Takes three operands, not four. Fix
1122 (r5900/min.s): Incorrect opcode ....,101001 not ...110000.
1123 (r5900/msub.s): Takes three operands, not four. Fix opcode.
1126 Thu Feb 26 15:53:09 1998 Michael Meissner <meissner@cygnus.com>
1128 * d30v-opc.c (d30v_opcode_table): Indicate which instructions are
1129 delayed branches or jumps.
1132 Fri Feb 27 10:04:19 1998 Doug Evans <devans@canuck.cygnus.com>
1134 * dvp-opc.c (vif_operands): Add unpack[u] support.
1135 (vif_opcodes): Ditto.
1136 (*_vif_imrubits): Renamed from *_vif_imrbits.
1138 Wed Feb 25 00:27:44 1998 Doug Evans <devans@canuck.cygnus.com>
1140 * dvp-dis.c (print_insn): Handle word number.
1141 Handle mips address vs vu address.
1142 * dvp-opc.c (vif_operands): Use DVP_OPERAND_VU_ADDRESS.
1143 (dma_operands): Use DVP_OPERAND_MIPS_ADDRESS.
1144 ({insert,extract}_dma_addr): Fix word ofset.
1145 ({insert,print}_gif_regs): Fix encode/decode.
1148 Tue Feb 24 10:46:44 1998 Doug Evans <devans@canuck.cygnus.com>
1150 * arm-dis.c (print_insn_{big,little}_arm): info->symbol changed
1152 * mips-dis.c (print_insn_{big,little}_mips): Likewise.
1153 * tic30-dis.c (print_branch): Likewise.
1155 * mips-dis.c (print_insn_little_mips): Call dvp_info_mach_type.
1156 * dvp-dis.c (dvp_info_mach_type): New function.
1157 (print_insn_dvp): Call it.
1158 (print_vif): Return length of 4 if mpg or direct insn so following
1159 insns get properly disabled.
1160 (print_gif): Fix word order.
1161 * dvp-opc.c (vif_insn_len): New argument `pcpu'. All callers updated.
1162 (gif_operands): Fix word order.
1163 (gif_opcodes): Likewise.
1164 ({insert,extract,print}_gif_regs): Likewise.
1165 (gif_regs): Add new register number/name changes.
1166 (dma_opcodes): Add dmarefe insn.
1169 Tue Feb 24 11:06:18 1998 Nick Clifton <nickc@cygnus.com>
1171 * arm-dis.c (print_insn_big_arm, print_insn_little_arm): Remove
1172 saved_symbol code as it is no longer needed.
1174 Mon Feb 23 13:16:17 1998 Doug Evans <devans@seba.cygnus.com>
1176 * cgen-asm.c: Include symcat.h.
1177 * cgen-dis.c,cgen-opc.c,cgen-asm.in,cgen-dis.in: Ditto.
1179 * m32r-asm.c,m32r-dis.c,m32r-opc.h,m32r-opc.c: Regenerate.
1182 Mon Feb 23 09:51:39 1998 Doug Evans <devans@canuck.cygnus.com>
1184 * dvp-opc.c (extra_dma_flags): Fix typos.
1185 (dma_operands): Fix word numbers.
1186 (dma_opcodes): Likewise.
1187 ({insert,extract}_dma_flags): Likewise.
1190 Mon Feb 23 10:34:58 1998 Jeffrey A Law (law@cygnus.com)
1192 * mips-dis.c (print_insn_arg): Do not prefix 'P' arguments with '$'.
1195 Fri Feb 20 18:02:20 1998 Doug Evans <devans@canuck.cygnus.com>
1197 * dvp-dis.c (print_gif): Complete.
1198 * dvp-opc.c (gif_operands,gif_opcodes): Complete.
1199 (state_gif_{nregs,regs,nloop}): New static locals.
1200 (*_gif_*): Complete.
1201 (dvp_opcode_init_{parse,print}): Init gif state locals.
1202 (extract_vif_datalen,{insert,extract}_vif_imrbits): New functions.
1203 (vif_insn_len): Handle `unpack'.
1204 ({insert,extract}_dma_flags): Complete.
1207 start-sanitize-r5900
1208 Fri Feb 20 01:23:16 1998 Jeffrey A Law (law@cygnus.com)
1210 * mips-opc.c (mula.s): Renamed from multa.s.
1213 Thu Feb 19 16:51:13 1998 Doug Evans <devans@canuck.cygnus.com>
1215 * m32r-opc.[ch]: Regenerate.
1218 Thu Feb 19 02:11:39 1998 Doug Evans <devans@charmed.cygnus.com>
1220 * dvp-opc.c (dma_operands): Rewrite.
1221 (dma_operand_{count,addr}): New globals.
1222 (dma_opcodes): Rewrite. Add "dmaend" with no operands.
1223 (insert_dma_addr): Insert value into insn.
1224 (extract_dma_addr): Extract value from insn.
1226 Wed Feb 18 15:46:46 1998 Doug Evans <devans@canuck.cygnus.com>
1228 * dvp-dis.c (print_vu): Handle loi insns.
1229 (print_insn): Likewise.
1230 * dvp-opc.c (vu_lower_opcodes): Add "loi".
1231 (vu_operands): Make LDEST1 a FAKE operand.
1232 (parse_dest1): Allow elided argument.
1233 (print_dest1): Don't print the argument.
1235 Tue Feb 17 18:48:25 1998 Doug Evans <devans@canuck.cygnus.com>
1237 * dvp-opc.c (parse_vfreg): Dest spec is optional.
1238 (print_vfreg): Don't print dest spec.
1239 (parse_accdest): Dest spec is optional.
1240 (print_accdest): Don't print dest spec.
1243 Tue Feb 17 17:14:50 1998 Doug Evans <devans@seba.cygnus.com>
1245 * Makefile.am (CGENFILES): Update.
1246 * Makefile.in: Regenerate.
1247 * cgen-asm.in (insert_normal): Result is error message now.
1248 Validate value to be inserted.
1249 (insert_insn_normal): Result is error message now.
1250 (@arch@_cgen_assemble_insn): Update.
1251 * cgen-asm.c (cgen_parse_{signed,unsigned}_integer): Delete min,max
1252 arguments. Don't perform validation here.
1253 * m32r-asm.c,m32r-dis.c,m32r-opc.c: Regenerate.
1255 Fri Feb 13 14:26:06 1998 Doug Evans <devans@canuck.cygnus.com>
1257 * cgen-opc.in (@arch@_cgen_get_insn_operands): Handle empty
1258 operand instance list.
1259 * m32r-opc.c: Regenerate.
1261 Fri Feb 13 14:53:02 1998 Ian Lance Taylor <ian@cygnus.com>
1263 * Makefile.am (AUTOMAKE_OPTIONS): Define.
1264 * configure, Makefile.in, aclocal.m4: Rebuild with automake 1.2e.
1266 Fri Feb 13 10:21:09 1998 Mark Alexander <marka@cygnus.com>
1268 * m10300-dis.c (print_insn_mn10300): Recognize break instruction.
1270 Fri Feb 13 13:12:14 1998 Ian Lance Taylor <ian@cygnus.com>
1272 * configure.in: Get the version number from BFD.
1273 * configure: Rebuild.
1275 From H.J. Lu <hjl@gnu.org>:
1276 * Makefile.am (libopcodes_la_LDFLAGS): Define.
1277 * Makefile.in: Rebuild.
1279 Fri Feb 13 09:50:32 1998 Nick Clifton <nickc@cygnus.com>
1281 * m32r-opc.c: Regenerate.
1282 * m32r-opc.h: Regenerate.
1284 Thu Feb 12 11:01:40 1998 Doug Evans <devans@canuck.cygnus.com>
1286 * cgen-opc.in (@arch@_cgen_lookup_insn): New argument alias_p.
1287 Ignore ALIAS insns if asked to.
1288 (@arch@_cgen_get_insn_operands): Pass 0 for alias_p, NULL for insn.
1289 * m32r-opc.c: Regenerate.
1292 * dvp.opc.c: Nicely format opcode tables.
1293 (vu_operands): New element UFLAGS.
1294 (parse_uflags,print_uflags): New functions.
1295 (vu_upper_opcodes): Add UFLAGS to all insns.
1298 Thu Feb 12 03:41:00 1998 J"orn Rennecke <amylaar@cygnus.co.uk>
1300 Fix rac to accept only a0:
1301 * d10v-opc.c (d10v_predefined_registers, d10v_operands, d10v_opcodes):
1302 Split OPERAND_ACC into OPERAND_ACC0 and OPERAND_ACC1.
1303 Introduce OPERAND_GPR.
1304 * d10v-dis.c (print_operand): Likewise.
1306 Wed Feb 11 18:58:34 1998 Doug Evans <devans@seba.cygnus.com>
1308 * cgen-opc.in: New file.
1309 * cgen.sh: Translate @ARCH@. Cat cgen-opc.in into @arch@-opc.c.
1310 * Makefile.am (CGENFILES): Add cgen-opc.in.
1311 * Makefile.in: Regenerate.
1313 * cgen-opc.c (cgen_set_cpu): Delete init of hw list `next' chain.
1314 (cgen_hw_lookup): Make result const.
1316 * cgen-dis.in (*): Use PTR instead of void *.
1317 (print_insn): Delete unused vars `i', `syntax'.
1319 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1322 Tue Feb 10 14:56:24 1998 Doug Evans <devans@canuck.cygnus.com>
1324 * dvp-opc.c (*): pke,gpuif renamed to vif,gif.
1325 (vif_opcodes): Update renamed insns.
1326 * dvp-dis.c (*): Likewise.
1329 Sat Feb 7 15:30:27 1998 Ian Lance Taylor <ian@cygnus.com>
1331 * configure, aclocal.m4: Rebuild with new libtool.
1333 Thu Feb 5 17:56:10 1998 Michael Meissner <meissner@cygnus.com>
1335 * d30v-opc.c (repeat{,i} instructions): Repeat/repeati
1336 instructions use a PC relative branch, not absolute.
1338 Wed Feb 4 19:17:37 1998 Ian Lance Taylor <ian@cygnus.com>
1340 * configure.in: Set libtool_enable_shared rather than
1341 libtool_shared. Remove diversion hack.
1342 * configure, Makefile.in, aclocal.m4: Rebuild with new libtool.
1344 Tue Feb 3 17:19:40 1998 Doug Evans <devans@seba.cygnus.com>
1346 * cgen-opc.c (cgen_set_cpu): Initialize hardware table.
1347 * m32r-opc.h, m32r-opc.c, m32r-asm.c, m32r-dis.c: Regenerate.
1349 Mon Feb 2 19:22:15 1998 Steve Haworth <steve@pm.cse.rmit.EDU.AU>
1351 * tic30-dis.c: New file.
1352 * disassemble.c (disassembler): Add bfd_arch_tic30 case.
1353 * configure.in: Handle bfd_tic30_arch.
1354 * Makefile.am: Rebuild dependencies.
1355 (CFILES): Add tic30-dis.c
1356 (ALL_MACHINES): Add tic30-dis.lo.
1357 * configure, Makefile.in: Rebuild.
1359 start-sanitize-m32rx
1360 Mon Feb 2 11:04:08 1998 Nick Clifton <nickc@cygnus.com>
1362 * m32r-opc.c, m32r-opc.h, m32r-asm.c m32r-dis.c: Newly generated
1363 versions after updates to m32r.cpu to remove mulwhi-a, mulwlo-a,
1364 macwhi-a and macwlo-a instructions.
1368 Fri Jan 30 17:39:21 1998 Ian Carmichael <iancarm@cygnus.com>
1370 * dvp-opc.c, fixed encoding of a bunch of instructions to
1371 be consistent with the asmvu assembler (and inconsistent
1372 with the specification).
1374 Thu Jan 29 18:14:56 1998 Ian Carmichael <iancarm@cygnus.com>
1376 * dvp-opc.c, fixed order of pkemscal/pkemscalf instructions
1377 in the opcode table. The pkemscalf instruction must come first.
1379 Thu Jan 29 16:47:24 1998 Ian Carmichael <iancarm@cygnus.com>
1381 * dvp-opc.c, MAXIi should be VUOP6(0x1d) instead of 0x2d.
1384 Thu Jan 29 13:02:56 1998 Doug Evans <devans@canuck.cygnus.com>
1386 * m32r-opc.h (HAVE_CPU_M32R): Define.
1389 Wed Jan 28 13:46:19 1998 Doug Evans <devans@canuck.cygnus.com>
1391 * dvp-dis.c, dvp-opc.c: New files.
1392 * configure.in: Compile them if bfd_dvp_arch, as well as mips.
1393 * configure: Regenerate.
1394 * Makefile.am (ALL_MACHINES): Add dvp-{dis,opc}.lo.
1395 (dvp-dis.lo,dvp-opc.lo): Add rules for.
1396 (mips-dis.lo): Compile with @archdefs@.
1397 * Makefile.in: Regenerate.
1398 * disassemble.c: Define ARCH_mips ifdef ARCH_dvp.
1399 * mips-dis.c (print_insn_little_mips): Check for DVP insns.
1402 Wed Jan 28 09:55:03 1998 Nick Clifton <nickc@cygnus.com>
1404 * v850-opc.c (insertion routines): If both alignment and size is
1405 wrong then report this.
1407 Tue Jan 27 21:52:59 1998 Jeffrey A Law (law@cygnus.com)
1409 * mips-dis.c (_print_insn_mips): Set target_processor as appropriate.
1410 Only recognize instructions for the current target_processor.
1412 Thu Jan 22 16:20:17 1998 Fred Fish <fnf@cygnus.com>
1414 * d10v-dis.c (PC_MASK): Correct value.
1415 (print_operand): If there's a reloc, don't calculate the
1416 address because they could be in different sections.
1418 start-sanitize-cygnus
1419 Thu Jan 22 16:10:32 1998 Doug Evans <devans@seba.cygnus.com>
1421 * cgen.sh: Rewrite to be like simulator's version.
1422 * Makefile.am (cgen): Update call to cgen.sh.
1423 * Makefile.in: Regenerate
1426 Fri Jan 16 15:29:11 1998 Jim Blandy <jimb@zwingli.cygnus.com>
1428 * mips-opc.c (mips_builtin_opcodes): Move 4010's "addciu"
1429 instruction after the 4650's "mul" instruction; nobody's using the
1430 4010 these days. If object files someday indicate which processor
1431 variant they're intended for, we can do a better job at this.
1433 start-sanitize-r5900
1434 Tue Jan 13 09:21:56 1998 Jeffrey A Law (law@cygnus.com)
1436 * mips-opc.c (c.lt.s): Add r5900 variant.
1440 Mon Jan 12 14:43:54 1998 Doug Evans <devans@seba.cygnus.com>
1442 * cgen-asm.c (build_asm_hash_table): Traverse compiled in table using
1443 table provided entry size. Use CGEN_INSN_MNEMONIC.
1444 (cgen_parse_keyword): Rewrite.
1445 * cgen-dis.c (build_dis_hash_table): Traverse compiled in table using
1446 table provided entry size. Use CGEN_INSN_MASK_BITSIZE.
1447 * cgen-opc.c: Clean up pass over `struct foo' usage.
1448 (cgen_keyword_lookup_value): Handle "" entry.
1449 (cgen_keyword_add): Likewise.
1450 start-sanitize-cygnus
1451 * Makefile.am: Add cgen support.
1452 * Makefile.in: Regenerate.
1453 * configure.in: Add cgen support.
1454 * configure: Regenerate.
1455 * aclocal.m4: Regenerate.
1456 * cgen.sh, cgen-asm.in, cgen-dis.in: New files.
1459 Mon Dec 22 12:37:06 1997 Ian Lance Taylor <ian@cygnus.com>
1461 * mips-opc.c: Add FP_D to s.d instruction flags.
1463 Wed Dec 17 11:38:29 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1465 * m68k-opc.c (halt, pulse): Enable them on the 68060.
1467 start-sanitize-tic80
1468 Tue Dec 16 15:22:53 1997 Fred Fish <fnf@cygnus.com>
1470 * tic80-opc.c (tic80_opcodes): Revert change that put the 32 bit
1471 PC relative offset forms before the 15 bit forms. An assembler command
1472 line option now chooses the default.
1475 start-sanitize-r5900
1476 Tue Dec 16 13:24:22 1997 Jeffrey A Law (law@cygnus.com)
1478 * mips-opc.c: Add many missing r5900 instructions.
1481 Tue Dec 16 15:22:51 1997 Michael Meissner <meissner@cygnus.com>
1483 * d30v-opc.c (d30v_opcode_table): Set new flags bits
1484 FLAG_{2WORD,MUL{16,32},ADDSUBppp}, in appropriate instructions.
1486 1997-12-15 Brendan Kehoe <brendan@lisa.cygnus.com>
1488 * configure: Only build libopcodes shared if --enable-shared's value
1489 was `yes', or was set to `*opcodes*'.
1490 * aclocal.m4: Likewise.
1491 * NOTE: this really needs to be fixed in libtool/libtool.m4, the
1492 original source of this bit of code. It's not clear what the best fix
1495 start-sanitize-r5900
1496 Mon Dec 15 12:43:36 1997 Jeffrey A Law (law@cygnus.com)
1498 * mips-opc.c (mtpc, mfpc, mtps, mfps): Add r5900 variants.
1500 start-sanitize-tic80
1501 Fri Dec 12 11:57:04 1997 Fred Fish <fnf@cygnus.com>
1503 * tic80-opc.c (OFF_SL_PC, OFF_SL_BR): Minor formatting change.
1504 (tic80_opcodes): Reorder table entries to put the 32 bit PC relative
1505 offset forms before the 15 bit forms, to default to the long forms.
1508 Fri Dec 12 01:32:30 1997 Richard Henderson <rth@cygnus.com>
1510 * alpha-opc.c (cvttq/*u*): Remove, as that suffix is invalid.
1512 Wed Dec 10 17:42:35 1997 Nick Clifton <nickc@cygnus.com>
1514 * arm-dis.c (print_insn_little_arm): Prevent examination of stored
1515 symbol if none is present.
1516 (print_insn_big_arm): Prevent examination of stored symbol if
1519 Thu Oct 23 21:13:37 1997 Fred Fish <fnf@cygnus.com>
1521 * d10v-opc.c (d10v_opcodes): Correct entry for RTE.
1523 Mon Dec 8 11:21:07 1997 Nick Clifton <nickc@cygnus.com>
1525 * disassemble.c: Remove disasm_symaddr() function.
1527 * arm-dis.c: Use info->symbol instead of info->flags to determine
1528 if disassmbly should be in Thumb or Arm mode.
1530 Tue Dec 2 09:54:27 1997 Nick Clifton <nickc@cygnus.com>
1532 * arm-dis.c: Add support for disassembling Thumb opcodes.
1533 (print_insn_thumb): New function.
1535 * disassemble.c (disasm_symaddr): New function.
1537 * arm-opc.h: Display nop pseudo ops alongside equivalent disassembly.
1538 (thumb_opcodes): Table of Thumb opcodes.
1540 Mon Dec 1 12:25:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1542 * m68k-opc.c (btst): Change Dd@s to Dd;b.
1544 * m68k-dis.c (print_insn_arg): Recognize 'm', 'n', 'o', 'p', 'q',
1545 and 'v' as operand types.
1547 Mon Dec 1 11:56:50 1997 Ian Lance Taylor <ian@cygnus.com>
1549 * m68k-opc.c: Add argument for lpstop. From Olivier Carmona
1550 <olivier.carmona@di.epfl.ch>.
1551 * m68k-dis.c (print_insn_m68k): Handle special case of lpstop,
1552 which has a two word opcode with a one word argument.
1554 Sun Nov 23 22:25:21 1997 Michael Meissner <meissner@cygnus.com>
1556 * d30v-opc.c (d30v_opcode_table, case cmpu): Immediate field is
1557 unsigned, not signed.
1558 (d30v_format_table): Add SHORT_CMPU cases for cmpu.
1560 Wed Nov 19 17:42:35 1997 Richard Henderson <rth@cygnus.com>
1562 * sh-dis.c (print_insn_shx): Recognize all sh4 additions.
1563 * sh-opc.h (fmov): Add @<REG_M>+,<DX_REG_N> variant for sh4.
1564 (ftrv): Slay the cut-and-paste monster.
1566 Tue Nov 18 23:10:03 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1568 * d10v-dis.c (print_operand):
1569 Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
1571 Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1573 * d10v-opc.c (OPERAND_FLAG): Split into:
1574 (OPERAND_FFLAG, OPERAND_CFLAG) .
1578 Thu Nov 13 11:05:33 1997 Gavin Koch <gavin@cygnus.com>
1580 * mips-opc.c: Move the INSN_MACRO ISA value to the membership
1581 field for all INSN_MACRO's.
1582 * mips16-opc.c: same
1584 Wed Nov 12 10:16:57 1997 Gavin Koch <gavin@cygnus.com>
1586 * mips-opc.c (sync,cache): These are 3900 insns.
1588 Tue Nov 11 23:53:41 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1590 sh-opc.h (sh_table): Remove ftst/nan.
1592 start-sanitize-cygnus
1593 Mon Nov 3 13:23:15 1997 Ken Raeburn <raeburn@cygnus.com>
1595 * mips-opc.c (dror32, dror, rzu.ob): Fix bugs in encoding.
1596 (c.*.ob, mula.ob, mull.ob, muls.ob, mulsl.ob): Put 'k' version
1598 * mips-dis.c (print_insn_arg): Handle VR5400 operand types.
1602 Wed Oct 29 15:10:56 1997 Gavin Koch <gavin@cygnus.com>
1604 * mips-opc.c (deret,dmult,dmultu,madd,maddu,pref,sdbbp):
1605 Add tx49 insns and configury.
1608 Tue Oct 28 17:59:32 1997 Ken Raeburn <raeburn@cygnus.com>
1610 * mips-opc.c (ffc, ffs): Fix mask.
1612 Tue Oct 28 16:34:54 1997 Michael Meissner <meissner@cygnus.com>
1614 * d30v-opc.c (pre_defined_registers): Add eit_vb, int_s, and int_m
1617 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1619 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1620 start-sanitize-cygnus
1621 Added VR5400 instructions.
1622 (N5): New cpu-id macro.
1624 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1626 Mon Oct 27 22:34:03 1997 Ken Raeburn <raeburn@cygnus.com>
1628 * mips-opc.c: Fix bug in mask for "not" pseudo-instruction.
1629 (WR_HILO, RD_HILO, MOD_HILO): New macros.
1631 Thu Oct 23 14:57:58 1997 Nick Clifton <nickc@cygnus.com>
1633 * v850-dis.c (disassemble): Replace // with /* ... */
1635 Wed Oct 22 17:33:21 1997 Richard Henderson <rth@cygnus.com>
1637 * sparc-opc.c: Add wr & rd for v9a asr's.
1638 * sparc-dis.c (print_insn_sparc): Recognize '_' and '/' for v9a asr's.
1639 (v9a_asr_reg_names): New variable.
1640 Patch from David Miller <davem@vger.rutgers.edu>.
1642 Wed Oct 22 17:18:02 1997 Richard Henderson <rth@cygnus.com>
1644 * sparc-opc.c (v9notv9a): New insn type.
1645 (IMPDEP): Move to the end to not conflict with edge8 et al.
1646 Patch from David Miller <davem@vger.rutgers.edu>.
1648 Fri Oct 17 13:18:53 1997 Gavin Koch <gavin@cygnus.com>
1650 * mips-opc.c (bnezl,beqzl): Mark these as also tx39.
1652 Thu Oct 16 11:55:20 1997 Gavin Koch <gavin@cygnus.com>
1654 * mips-opc.c: Note that 'jalx' is (probably incorrectly) marked I1.
1656 Tue Oct 14 16:10:31 1997 Nick Clifton <nickc@cygnus.com>
1658 * v850-dis.c (disassemble): Use new symbol_at_address_func() field
1659 of disassemble_info structure to determine if an overlay address
1660 has a matching symbol in low memory.
1662 * dis-buf.c (generic_symbol_at_address): New (dummy) function for
1663 new symbol_at_address_func field in disassemble_info structure.
1665 Fri Oct 10 16:44:52 1997 Nick Clifton <nickc@cygnus.com>
1667 * v850-opc.c (extract_d22): Use signed arithmatic.
1669 Tue Oct 7 23:40:43 1997 Gavin Koch <gavin@cygnus.com>
1671 * mips-opc.c: Three op mult is not an ISA insn.
1673 Tue Oct 7 23:37:21 1997 Gavin Koch <gavin@cygnus.com>
1675 * mips-opc.c: Fix formatting.
1677 Fri Oct 3 17:26:54 1997 Ian Lance Taylor <ian@cygnus.com>
1679 * i386-dis.c (OP_E): Explicitly sign extend 8 bit values, rather
1680 than assuming that char is signed. Explicitly sign extend 16 bit
1681 values, rather than assuming that short is 16 bits.
1682 (OP_sI, OP_J, OP_DIR): Likewise.
1684 start-sanitize-v850e
1685 Thu Oct 2 13:36:45 1997 Nick Clifton <nickc@cygnus.com>
1687 * v850-dis.c (v850_sreg_names): Use symbolic names for higher
1691 Wed Oct 1 16:58:54 1997 Nick Clifton <nickc@cygnus.com>
1693 * v850-opc.c: Fix typo in comment.
1695 * v850-dis.c (disassemble): Add test of processor type when
1696 determining opcodes.
1698 Wed Oct 1 14:10:20 1997 Ian Lance Taylor <ian@cygnus.com>
1700 * configure.in: Use a diversion to set enable_shared before the
1701 arguments are parsed.
1702 * configure: Rebuild.
1704 Thu Sep 25 13:04:59 1997 Ian Lance Taylor <ian@cygnus.com>
1706 * m68k-opc.c (TBL1): Use ! rather than `.
1707 * m68k-dis.c (print_insn_arg): Remove ` operand specifier.
1709 Wed Sep 24 11:29:35 1997 Ian Lance Taylor <ian@cygnus.com>
1711 * m68k-opc.c: Correct bchg, bclr, bset, and btst on ColdFire.
1713 * m68k-opc.c: Accept tst{b,w,l} with immediate operands on cpu32.
1715 * m68k-opc.c: Correct movew of an immediate operand to %sr or %ccr
1718 * configure.in: Call AC_CHECK_TOOL before AM_PROG_LIBTOOL.
1719 * aclocal.m4: Rebuild with new libtool.
1720 * configure: Rebuild.
1722 start-sanitize-v850e
1723 Fri Sep 19 11:45:49 1997 Andrew Cagney <cagney@b1.cygnus.com>
1725 * v850-opc.c ("cmov"): Order reg param r1, r2 not r2, r2.
1728 Thu Sep 18 11:21:43 1997 Doug Evans <dje@canuck.cygnus.com>
1730 * sparc-opc.c (sparclet_cpreg_table): Add %ccsr2, %cccrr, %ccrstr.
1732 Tue Sep 16 15:18:20 1997 Nick Clifton <nickc@cygnus.com>
1734 * v850-opc.c (v850_opcodes): Further rearrangements.
1736 Tue Sep 16 16:12:11 1997 Ken Raeburn <raeburn@cygnus.com>
1738 * d30v-opc.c (rot2h, sra2h, srl2h insns): Revert last change.
1740 Tue Sep 16 09:48:50 1997 Nick Clifton <nickc@cygnus.com>
1742 * v850-opc.c (v850_opcodes): Fields reordered to allow assembler
1745 Tue Sep 16 10:01:00 1997 Gavin Koch <gavin@cygnus.com>
1747 * mips-opc.c: Added tx39 insns sdbbp, rfe, and deret.
1749 * mips16-opc.c: Added mips16 sdbbp.
1752 Mon Sep 15 18:31:52 1997 Nick Clifton <nickc@cygnus.com>
1754 * v850-opc.c: Initialise processors field of v850_opcode structure.
1756 Wed Aug 27 21:42:39 1997 Ken Raeburn <raeburn@cygnus.com>
1758 Merge changes from Martin Hunt:
1760 * d30v-opc.c: Change mvfacc to accept 6-bit unsigned values.
1762 * d30v-opc.c (pre_defined_registers): Add control registers from 0-63.
1763 (d30v_opcode_tabel): Add dbt, rtd, srah, and srlh instructions. Fix
1764 rot2h, sra2h, and srl2h to use new SHORT_A5S format.
1766 * d30v-dis.c (print_insn): Fix disassembly of SHORT_D2 opcodes.
1768 * d30v-dis.c (print_insn): First operand of d*i (delayed
1769 branch) instructions is relative.
1771 * d30v-opc.c (d30v_opcode_table): Change form for repeati.
1772 (d30v_operand_table): Add IMM6S3 type.
1773 (d30v_format_table): Change SHORT_D2. Add LONG_Db.
1775 * d30v-dis.c: Fix bug with ".s" and ".l" extensions
1776 and cmp instructions.
1778 * d30v-opc.c: Correct entries for repeat*, and sat*.
1779 Make IMM5 unsigned. Create IMM6U and IMM12S3U operand
1780 types. Correct several formats.
1782 * d30v-opc.c: (pre_defined_registers): Add dpsw and dpc.
1784 * d30v-opc.c (pre_defined_registers): Change control registers.
1786 * d30v-opc.c (d30v_format_table): Correct SHORT_C1 and
1787 SHORT_C2. Manual was incorrect.
1789 * d30v-dis.c (lookup_opcode): Return value now indicates
1790 if an opcode has a short and a long form. Used for deciding
1791 to append a ".s" or ".l".
1792 (print_insn): Append a ".s" to an instruction if it is
1793 the short form and ".l" if it is a long form. Do not append
1794 anything if the instruction has only one possible size.
1796 * d30v-opc.c: Change mulx2h to require an even register.
1797 New form: SHORT_A2; a SHORT_A form that needs an even
1798 register as the first operand.
1800 * d30v-dis.c (print_insn_d30v): Fix problem where the last
1801 instruction was not being disassembled if there were an odd
1802 number of instructions.
1804 * d30v-opc.c (SHORT_M2, LONG_M2): Two new forms.
1806 start-sanitize-v850e
1807 Fri Sep 12 11:43:54 1997 Nick Clifton <nickc@cygnus.com>
1809 * v850-dis.c (disassemble): Improved display of register lists.
1812 Thu Sep 11 17:35:10 1997 Doug Evans <dje@canuck.cygnus.com>
1814 * sparc-opc.c (sparc_opcodes): Fix assembler args to
1815 fzeros, fones, fsrc1, fsrc1s, fsrc2s, fnot1, fnot1s, fnot2s,
1816 fors, fnors, fands, fnands, fxors, fxnors, fornot1s, fornot2s,
1817 fandnot1s, fandnot2s.
1819 Tue Sep 9 10:03:49 1997 Doug Evans <dje@canuck.cygnus.com>
1821 * sparc-opc.c (sparc_opcodes): Fix op3 field for fcmpq/fcmpeq.
1823 Mon Sep 8 14:06:59 1997 Doug Evans <dje@canuck.cygnus.com>
1825 * cgen-asm.c (cgen_parse_address): New argument resultp.
1826 All callers updated.
1827 * m32r-asm.c (parse_h_hi16): Right shift numbers by 16.
1829 Tue Sep 2 18:39:08 1997 Jeffrey A Law (law@cygnus.com)
1831 * mn10200-dis.c (disassemble): PC relative instructions are
1832 relative to the next instruction, not the current instruction.
1834 Tue Sep 2 15:41:55 1997 Nick Clifton <nickc@cygnus.com>
1836 * v850-dis.c (disassemble): Only signed extend values that are not
1837 returned by extract functions.
1838 Remove use of V850_OPERAND_ADJUST_SHORT_MEMORY flag.
1840 Tue Sep 2 15:39:40 1997 Nick Clifton <nickc@cygnus.com>
1842 * v850-opc.c: Update comments. Remove use of
1843 V850_OPERAND_ADJUST_SHORT_MEMORY. Fix several operand patterns.
1845 Tue Aug 26 09:42:28 1997 Nick Clifton <nickc@cygnus.com>
1847 * v850-opc.c (MOVHI): Immediate parameter is unsigned.
1849 Mon Aug 25 15:58:07 1997 Christopher Provenzano <proven@cygnus.com>
1851 * configure: Rebuilt with latest devo autoconf for NT support.
1853 Fri Aug 22 10:35:15 1997 Nick Clifton <nickc@cygnus.com>
1855 * v850-dis.c (disassemble): Use curly brace syntax for register
1858 * v850-opc.c (v850_opcodes[]): Add NOT_R0 flag to decect cases
1859 where r0 is being used as a destination register.
1861 start-sanitize-v850e
1862 Thu Aug 21 11:09:09 1997 Nick Clifton <nickc@cygnus.com>
1864 * v850-opc.c (v850_opcodes[]): Move divh opcodes next to each other.
1867 Wed Aug 20 00:43:11 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
1869 * sh-opc.h (sh_arg_type): Add A_SGR and A_DBR.
1870 (sh_nibble_type, sh_arg_type): Add SH4 floating point extensions.
1871 (sh_table): Likewise. Add movca.l, ocbi, ocbp, ocbwb.
1872 Add insns to access SGR and DBR.
1873 * sh-dis.c (print_insn_shx): Add SH4 floating point extensions.
1875 Tue Aug 19 10:59:59 1997 Richard Henderson <rth@cygnus.com>
1877 * alpha-opc.c (alpha_opcodes): Fix hw_rei_stall mungage.
1879 start-sanitize-v850e
1880 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
1882 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
1883 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
1886 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1888 * configure (cgen_files): Add support for v850e target.
1889 * configure.in (cgen_files): Add support for v850e target.
1891 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
1893 * configure (cgen_files): Add support for v850ea target.
1894 * configure.in (cgen_files): Add support for v850ea target.
1897 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
1899 * configure.in (bfd_arc_arch): Add.
1900 * configure: Rebuild.
1901 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
1902 * Makefile.in: Rebuild.
1903 * arc-dis.c, arc-opc.c: New files.
1904 * disassemble.c (ARCH_all): Define ARCH_arc.
1905 (disassembler): Add ARC support.
1907 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
1909 start-sanitize-v850e
1910 * v850-dis.c (disassemble): Add support for v850EA instructions.
1912 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
1913 (v850_opcodes): Add v850EA instructions.
1915 * v850-dis.c (disassemble): Add support for v850E instructions.
1917 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
1918 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
1919 insert_spe, extract_spe): New Functions.
1920 (v850_opcodes): Add v850E instructions.
1923 * v850-opc.c: Reorganised and re-layed out to improve readability
1926 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
1928 * configure: Rebuild with autoconf 2.12.1.
1930 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
1932 * aclocal.m4, configure: Rebuild with new automake patches.
1934 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
1936 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
1937 * acinclude.m4: Just include acinclude.m4 from BFD.
1938 * aclocal.m4, configure: Rebuild.
1940 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
1942 * Makefile.am: New file, based on old Makefile.in.
1943 * acconfig.h: New file.
1944 * acinclude.m4: New file.
1945 * stamp-h.in: New file.
1946 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
1947 Removed shared library handling; now handled by libtool. Replace
1948 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
1949 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
1950 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
1951 handling in AC_OUTPUT.
1952 * dep-in.sed: Change .o to .lo.
1953 * Makefile.in: Now built with automake.
1954 * aclocal.m4: Now built with aclocal.
1955 * config.in, configure: Rebuild.
1957 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
1959 * mips-opc.c: Fix typo/thinko in "eret" instruction.
1961 start-sanitize-r5900
1962 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
1964 * mips-opc.c: Fix coding of mtsa.
1967 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
1969 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
1971 * sparc-dis.c (sorted_opcodes): New static local.
1972 (struct opcode_hash): `opcode' is pointer to const element.
1973 (build_hash): First arg is now table of sorted pointers.
1974 (print_insn_sparc): Sort opcodes by sorting table of pointers.
1975 (compare_opcodes): Update.
1977 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
1979 * cgen-opc.c: #include <ctype.h>.
1980 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
1981 Handle case insensitive hashing.
1982 (hash_keyword_value): Change type of `value' to unsigned int.
1984 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
1986 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
1987 precision FP, mark it as such. Likewise for double precision
1988 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
1990 start-sanitize-r5900
1991 (mips_builtin_opcodes): Remove non-existant r5900 instructions
1994 start-sanitize-r5900
1995 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
1997 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
1998 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
2001 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
2003 * ppc-opc.c (extract_nsi): make unsigned expression signed before
2005 (UNUSED): remove one level of parens, so MSVC doesn't choke on
2006 nesting depth when all the macros are expanded.
2008 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
2010 * sparc-opc.c: The fcmp v9a instructions take an integer register
2011 as a destination, not a floating point register. From Christian
2012 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
2014 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
2016 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
2017 syntax. From Roman Hodek
2018 <rnhodek@faui22c.informatik.uni-erlangen.de>.
2020 * i386-dis.c (twobyte_has_modrm): Fix pand.
2022 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
2024 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
2026 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
2028 * arm-dis.c: Add prototypes for arm_decode_shift and
2031 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
2033 * mips-opc.c: Add r3900 insns.
2035 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
2037 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
2038 print delay slot instructions on the same line. When using a PC
2039 relative load, add a comment with the value being loaded if it can
2042 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
2044 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
2045 to pushS/popS for segment regs and byte constant so that
2046 pushw/popw printed when in 16 bit data mode.
2048 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
2049 print cbtw, cwtd in 16 bit data mode.
2050 * i386-dis.c (putop): extra case W to support above.
2052 * i386-dis.c (print_insn_x86): print addr32 prefix when given
2053 address size prefix in 16 bit address mode.
2055 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
2057 * sh-dis.c: Reindent. Rename local variable fprintf to
2060 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
2062 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
2064 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
2066 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
2068 * mips16-opc.c (mip16_opcodes): same.
2070 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
2072 * m68k-opc.c (moveb): Change $d to %d.
2074 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
2076 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
2077 (twobyte_has_modrm): Likewise.
2079 (OP_MMX, OP_EM, OP_MS): New static functions.
2081 * i386-dis.c: Revert patch of April 4. The output now matches
2084 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
2086 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
2089 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
2091 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
2093 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
2095 * Makefile.in (install): Depend upon installdirs.
2096 (installdirs): New target.
2098 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
2100 From Thomas Graichen <graichen@rzpd.de>:
2101 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
2102 * configure: Rebuild.
2104 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
2106 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
2107 Delete string{,s}.h support.
2109 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
2111 * cgen-asm.c (cgen_parse_operand_fn): New global.
2112 (cgen_parse_{{,un}signed_integer,address}): Update call to
2113 cgen_parse_operand_fn.
2114 (cgen_init_parse_operand): New function.
2115 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
2116 from cgen_asm_init_parse.
2117 (m32r_cgen_assemble_insn): New operand `errmsg'.
2118 Delete call to as_bad, return error message to caller.
2119 (m32r_cgen_asm_hash_keywords): #if 0 out.
2121 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2123 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
2125 [case 'J']: Fix typo in register name.
2127 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
2129 * configure.in: Substitute SHLIB_LIBS.
2130 * configure: Rebuild.
2131 * Makefile.in (SHLIB_LIBS): New variable.
2132 ($(SHLIB)): Use $(SHLIB_LIBS).
2134 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
2136 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
2138 * cgen-opc.c (hash_keyword_name): Improve algorithm.
2140 * disassemble.c (disassembler): Handle m32r.
2142 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
2144 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
2145 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
2146 * Makefile.in (CFILES): Add them.
2147 (ALL_MACHINES): Add them.
2148 (dependencies): Regenerate.
2149 * configure.in (cgen_files): New variable.
2150 (bfd_m32r_arch): Add entry.
2151 * configure: Regenerate.
2153 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
2155 * configure.in: Correct file names for bfd_mn10[23]00_arch.
2156 * configure: Rebuild.
2158 * Makefile.in: Rebuild dependencies.
2160 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
2162 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
2165 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
2167 * Branched binutils 2.8.
2169 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
2171 * m10200-dis.c: Rename from mn10200-dis.c.
2172 * m10200-opc.c: Rename from mn10200-opc.c.
2173 * m10300-dis.c: Rename from mn10300-dis.c
2174 * m10300-opc.c: Rename from mn10300-opc.c.
2175 * Makefile.in: Update accordingly.
2177 * mips16-opc.c: Add mul and dmul macros.
2179 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
2181 * makefile.vms: Update CFLAGS, add clean target.
2183 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
2185 * mips-opc.c: Add "wait". From Ralf Baechle
2186 <ralf@gnu.ai.mit.edu>.
2188 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
2189 * configure, config.in: Rebuild.
2190 * sysdep.h: Include <stdlib.h> if it exists.
2191 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
2193 * Makefile.in: Rebuild dependencies.
2195 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
2197 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
2198 Andrew Bray <andy@madhouse.demon.co.uk>.
2200 * mips-opc.c: Add cast when setting mips_opcodes.
2202 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
2204 * v850-dis.c (disassemble): Fix sign extension problem.
2205 * v850-opc.c (extract_d*): Fix sign extension problems to make
2206 disassembly calculate branch offsets correctly.
2208 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
2210 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
2212 * mips-opc.c: Add dctr and dctw.
2214 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2216 * d30v-dis.c (print_insn): Change the way signed constants
2219 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
2221 * Makefile.in (BFD_H): New variable.
2222 (HFILES): New variable.
2223 (CFILES): Add all C files.
2224 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
2225 Delete old dependencies, and build new ones.
2226 * dep-in.sed: New file.
2228 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2230 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
2232 start-sanitize-coldfire
2233 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
2235 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
2238 end-sanitize-coldfire
2239 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
2241 * mn10200-opc.c: Change "trap" to "syscall".
2242 * mn10300-opc.c: Add new "syscall" instruction.
2244 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2246 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
2247 mulul insns on the coldfire.
2249 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
2251 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
2252 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
2253 (print_insn_little_arm): Likewise.
2255 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
2257 Based on patches from H.J. Lu <hjl@lucon.org>:
2258 * i386-dis.c (fetch_data): Add prototype.
2259 * m68k-dis.c (fetch_data): Add prototype.
2260 (dummy_print_address): Add prototype. Make static.
2261 * ppc-opc.c (valid_bo): Add prototype.
2262 * sparc-dis.c (build_hash_table): Add prototype.
2263 (is_delayed_branch, compute_arch_mask): Add prototypes.
2264 (print_insn_sparc): Make several local variables const.
2265 (compare_opcodes): Change arguments to const PTR. Add prototype.
2266 * sparc-opc.c (arg): Change name field to be const.
2267 (lookup_name, lookup_value): Add prototypes. Change table and
2268 name parameters to be const.
2269 (sparc_encode_asi): Change name parameter to be const.
2270 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
2271 (sparc_encode_sparclet_cpreg): Likewise.
2272 (sparc_decode_asi): Change return type to be const.
2273 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
2274 (sparc_decode_sparclet_cpreg): Likewise.
2276 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
2278 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
2279 Solaris doesn't like the combined options, and the -f is
2281 (stamp-tshlink, install): Likewise.
2283 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
2285 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
2288 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
2290 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
2292 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
2294 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
2297 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2299 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
2301 start-sanitize-tic80
2302 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
2304 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
2306 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
2308 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
2311 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2313 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
2314 floatformat_to_double to make portable.
2315 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
2318 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
2320 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
2321 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
2323 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2325 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
2326 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
2328 start-sanitize-tic80
2329 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
2331 * tic80-opc.c (LSI_SCALED): Renamed from this ...
2332 (OFF_SL_BR_SCALED): ... to this, and added the flag
2333 TIC80_OPERAND_BASEREL to the flags word.
2334 (tic80_opcodes): Replace all occurances of LSI_SCALED with
2338 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
2340 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
2341 Change mips_opcodes from const array to a pointer,
2342 and change bfd_mips_num_opcodes from const int to int,
2343 so that we can increase the size of the mips opcodes table
2346 start-sanitize-tic80
2347 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
2349 * tic80-opc.c (tic80_predefined_symbols): Revert change to
2350 store BITNUM values in the table in one's complement form
2351 to match behavior when assembler is given a raw numeric
2352 value for a BITNUM operand.
2353 * tic80-dis.c (print_operand_bitnum): Ditto.
2356 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2358 * d30v-opc.c: Removed references to FLAG_X.
2360 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
2362 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
2364 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2366 * Makefile.in: Added d30v object files.
2367 * configure: (bfd_d30v_arch) Rebuilt.
2368 * configure.in: (bfd_d30v_arch) Added new case.
2369 * d30v-dis.c: New file.
2370 * d30v-opc.c: New file.
2371 * disassemble.c (disassembler) Add entry for d30v.
2373 start-sanitize-tic80
2374 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
2376 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
2377 representations for the floating point BITNUM values.
2379 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
2381 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
2382 in the table in one's complement form, as they appear in the
2384 (tic80_symbol_to_value): Use macros to access predefined
2386 (tic80_value_to_symbol): Ditto.
2387 (tic80_next_predefined_symbol): New function.
2388 * tic80-dis.c (print_operand_bitnum): Remove code that did
2389 one's complement for BITNUM values.
2392 start-sanitize-r5900
2393 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
2395 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
2398 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
2400 * makefile.vms: Remove 8 bit characters. Update to latest
2403 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
2405 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
2407 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
2409 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
2410 (IMM24_PCREL): Likewise.
2412 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
2414 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
2415 address for an extended PC relative instruction that is not a
2418 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2420 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
2423 start-sanitize-tic80
2424 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
2426 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
2427 (tic80_opcodes): Sort entries so that long immediate forms
2428 come after short immediate forms, making it easier for
2429 assembler to select the right one for a given operand.
2432 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
2434 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
2436 (print_insn_mips16): Likewise.
2438 start-sanitize-r5900
2439 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
2441 * mips-opc.c: add r5900.
2444 start-sanitize-tic80
2445 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
2447 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
2448 a symbol class that restricts translation to just that
2449 class (general register, condition code, etc).
2451 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
2453 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
2454 and REG_DEST_E for register operands that have to be
2455 an even numbered register. Add REG_FPA for operands that
2456 are one of the floating point accumulator registers.
2457 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
2458 (tic80_opcodes): Change entries that need even numbered
2459 register operands to use the new operand table entries.
2460 Add "or" entries that are identical to "or.tt" entries.
2463 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
2465 * mips16-opc.c: Add new cases of exit instruction for
2467 * mips-dis.c (print_mips16_insn_arg): Display floating point
2468 registers in operands of exit instruction. Print `$' before
2469 register names in operands of entry and exit instructions.
2471 start-sanitize-tic80
2472 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
2474 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
2475 pairs for all predefined symbols recognized by the assembler.
2476 Also used by the disassembling routines.
2477 (tic80_symbol_to_value): New function.
2478 (tic80_value_to_symbol): New function.
2479 * tic80-dis.c (print_operand_control_register,
2480 print_operand_condition_code, print_operand_bitnum):
2481 Remove private tables and use tic80_value_to_symbol function.
2484 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
2486 * d10v-dis.c (print_operand): Change address printing
2487 to correctly handle PC wrapping. Fixes PR11490.
2489 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
2491 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
2494 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
2496 * mips-dis.c (print_insn_mips16): Set insn_info information.
2497 (print_mips16_insn_arg): Likewise.
2499 * mips-dis.c (print_insn_mips16): Better handling of an extend
2500 opcode followed by an instruction which can not be extended.
2502 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
2504 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
2505 coldfire moveb instruction to not allow an address register as
2506 destination. Although the documentation does not indicate that
2507 this is invalid, experiments uncovered unexpected behavior.
2508 Added a comment explaining the situation. Thanks to Andreas
2509 Schwab for pointing this out to me.
2511 start-sanitize-tic80
2512 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
2514 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
2515 entries are presorted so that entries with the same mnemonic are
2516 adjacent to each other in the table. Sort the entries for each
2517 instruction so that this is true.
2520 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2522 * m68k-dis.c: Include <libiberty.h>.
2523 (print_insn_m68k): Sort the opcode table on the most significant
2524 nibble of the opcode.
2526 start-sanitize-tic80
2527 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
2529 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
2530 "vsub", "vst", "xnor", and "xor" instructions.
2531 (V_a1): Renamed from V_a, msb of accumulator reg number.
2532 (V_a0): Add macro, lsb of accumulator reg number.
2534 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
2536 * tic80-dis.c (print_insn_tic80): Broke excessively long
2537 function up into several smaller ones and arranged for
2538 the instruction printing function to be callable recursively
2539 to print vector instructions that have both a load and a
2540 math instruction packed into a single opcode.
2541 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
2542 to explain why it comes after the other vector opcodes.
2545 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
2547 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
2548 move insns to handle immediate operands.
2550 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2552 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
2553 fix operand mask in the "moveml" entries for the coldfire.
2555 start-sanitize-tic80
2556 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
2558 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
2559 New macros for building vector instruction opcodes.
2560 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
2561 FMT_LI, which were unused. The field is now a flags field.
2562 Remove some opcodes that are possible, but illegal, such
2563 as long immediate instructions with doubles for immediate
2564 values. Add "vadd" and "vld" instructions.
2566 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
2568 * tic80-opc.c (tic80_operands): Reorder some table entries to make
2569 the order more logical. Move the shift alias instructions ("rotl",
2570 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
2571 interspersed with the regular sr.x and sl.x instructions. Add
2572 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
2573 "sub", "subu", "swcr", and "trap".
2575 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
2577 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
2578 (OFF_SL_PC): Renamed from OFF_SL.
2579 (OFF_SS_BR): New operand type for base relative operand.
2580 (OFF_SL_BR): New operand type for base relative operand.
2581 (REG_BASE): New operand type for base register operand.
2582 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
2583 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
2584 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
2586 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
2587 10 char field, padded with spaces on rhs, rather than a string
2588 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
2589 than old TIC80_OPERAND_RELATIVE. Add support for new
2590 TIC80_OPERAND_BASEREL flag bit.
2592 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
2594 * tic80-dis.c (print_insn_tic80): Print floating point operands
2596 * tic80-opc.c (SPFI): Add single precision floating point
2597 immediate operand type.
2598 (ROTATE): Add rotate operand type for shifts.
2599 (ENDMASK): Add for shifts.
2600 (n): Macro for the 'n' bit.
2601 (i): Macro for the 'i' bit.
2602 (PD): Macro for the 'PD' field.
2603 (P2): Macro for the 'P2' field.
2604 (P1): Macro for the 'P1' field.
2605 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
2609 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
2611 * mn10200-dis.c (disassemble): Mask off unwanted bits after
2612 adding in current address for pc-relative operands.
2614 start-sanitize-tic80
2615 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
2617 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
2618 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
2619 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
2620 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
2621 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
2622 REG_BASE_M_SI, REG_BASE_M_LI respectively.
2623 (REG_SCALED, LSI_SCALED): New operand types.
2624 (E): New macro for 'E' bit at bit 27.
2625 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
2626 opcodes, including the various size flavors (b,h,w,d) for
2627 the direct load and store instructions.
2629 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
2631 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
2633 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
2634 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
2635 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
2636 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
2637 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
2638 masks with "MASK_* & ~M_*" to get the M bit reset.
2639 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
2641 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
2643 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
2644 correctly. Add support for printing TIC80_OPERAND_BITNUM and
2645 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
2647 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
2648 CC, SICR, and LICR table entries.
2649 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
2650 "bcnd", and "brcr" opcodes.
2653 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
2655 * ppc-opc.c (powerpc_operands): Make comment match the
2656 actual fields (no shift field).
2657 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
2658 start-sanitize-tic80
2659 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
2660 partial implementation, work in progress.
2661 * tic80-opc.c (tic80_operands): Begin construction operands table.
2662 (tic80_opcodes): Continue populating opcodes table and start
2663 filling in the operand indices.
2664 (tic80_num_opcodes): Add this.
2667 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
2669 * m68k-opc.c: Add #B case for moveq.
2671 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
2673 * mn10300-dis.c (disassemble): Make sure all variables are initialized
2674 before they are used.
2676 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
2678 * v850-opc.c (v850_opcodes): Put curly-braces around operands
2679 for "breakpoint" instruction.
2681 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
2683 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
2684 (dep): Use ALL_CFLAGS rather than CFLAGS.
2686 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2688 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
2691 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
2693 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
2694 start-sanitize-tic80
2695 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
2698 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
2700 * mips16-opc.c: Add "abs".
2702 start-sanitize-tic80
2703 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
2705 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
2706 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
2707 (disassembler): Add bfd_arch_tic80 support to set disassemble
2708 to print_insn_tic80.
2709 * tic80-dis.c (print_insn_tic80): Add stub.
2711 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
2713 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
2714 * configure: Regenerate with autoconf.
2715 * tic80-dis.c: Add file.
2716 * tic80-opc.c: Add file.
2719 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2721 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
2723 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
2725 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
2726 (mn10200_opcodes): Use it for some logicals and btst insns.
2727 Add "break" and "trap" instructions.
2729 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
2731 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
2733 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
2735 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
2736 relative load or add now depends upon whether the instruction is
2739 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
2741 * mn10200-dis.c: Finish writing disassembler.
2742 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
2743 Fix mask for "jmp (an)".
2745 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
2746 handle endianness issues for mn10300.
2748 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
2750 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
2752 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
2753 instruction. Fix opcode field for "movb (imm24),dn".
2755 * mn10200-opc.c (mn10200_operands): Fix insertion position
2758 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
2760 * mn10200-opc.c: Create mn10200 opcode table.
2761 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
2762 but moving along nicely.
2764 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2766 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
2768 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
2770 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
2771 specifiers for fmovem* instructions.
2773 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2775 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
2777 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
2779 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
2782 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
2784 * mn10300-opc.c: Add some comments explaining the various
2787 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
2789 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
2791 * m68k-dis.c (print_insn_arg): Handle new < and > operand
2794 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2795 operand specifiers in fmovm* instructions.
2797 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
2799 * ppc-opc.c (insert_li): Give an error if the offset has the two
2800 least significant bits set.
2802 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
2804 * mips-dis.c (print_insn_mips16): Separate the instruction from
2805 the arguments with a tab, not a space.
2807 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
2809 * mn10300-dis.c (disasemble): Finish conversion to '$' as
2812 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
2815 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
2817 * configure: Rebuild with autoconf 2.12.
2819 Add support for mips16 (16 bit MIPS implementation):
2820 * mips16-opc.c: New file.
2821 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
2822 (mips16_reg_names): New static array.
2823 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
2824 after seeing a 16 bit symbol.
2825 (print_insn_little_mips): Likewise.
2826 (print_insn_mips16): New static function.
2827 (print_mips16_insn_arg): New static function.
2828 * mips-opc.c: Add jalx instruction.
2829 * Makefile.in (mips16-opc.o): New target.
2830 * configure.in: Use mips16-opc.o for bfd_mips_arch.
2831 * configure: Rebuild.
2833 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
2835 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
2836 operand specifiers in *save, *restore and movem* instructions.
2838 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
2841 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
2842 register operands for immediate arithmetic, not, neg, negx, and
2843 set according to condition instructions.
2845 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
2846 specifier of the effective-address operand in immediate forms of
2847 arithmetic instructions. The specifier for the immediate operand
2848 notes how and where the constant will be stored.
2850 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
2852 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
2855 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
2858 * mn10300-dis.c (disassemble): Prefix registers with '%'.
2860 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
2862 * mn10300-dis.c (disassemble): Handle register lists.
2864 * mn10300-opc.c: Fix handling of register list operand for
2865 "call", "ret", and "rets" instructions.
2867 * mn10300-dis.c (disassemble): Print PC-relative and memory
2868 addresses symbolically if possible.
2869 * mn10300-opc.c: Distinguish between absolute memory addresses,
2870 pc-relative offsets & random immediates.
2872 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
2874 (disassemble): Handle SPLIT and EXTENDED operands.
2876 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
2878 * mn10300-dis.c: Rough cut at printing some operands.
2880 * mn10300-dis.c: Start working on disassembler support.
2881 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
2883 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
2885 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
2887 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
2889 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
2891 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
2893 * mn10300-opc.c (mn10300_opcodes): Demand parens around
2894 register argument is calls and jmp instructions.
2896 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
2898 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
2899 getx operand. Fix opcode for mulqu imm,dn.
2901 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
2903 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
2904 in MN10300_OPERAND_SPLIT operands for how many bits
2905 appear in the basic insn word. Add IMM32_HIGH24,
2906 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
2907 (mn10300_opcodes): Use new operands as needed.
2909 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
2910 for bset, bclr, btst instructions.
2911 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
2913 * mn10300-opc.c (mn10300_operands): Remove many redundant
2914 operands. Update opcode table as appropriate.
2915 (IMM32): Add MN10300_OPERAND_SPLIT flag.
2916 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
2918 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
2920 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
2921 operands (for indexed load/stores). Fix bitpos for DI
2922 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
2923 few instructions that insert immediates/displacements in the
2924 middle of the instruction. Add IMM8E for 8 bit immediate in
2925 the extended part of an instruction.
2926 (mn10300_operands): Use new opcodes as appropriate.
2928 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
2930 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
2931 sequential so the assembler never parallelizes it with
2934 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
2936 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
2937 a data/address register that appears in register field 0
2938 and register field 1.
2939 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
2941 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
2943 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
2944 standard disassembly.
2946 * alpha-opc.c (alpha_operands): Rearrange flags slot.
2947 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
2948 Recategorize PALcode instructions.
2950 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
2952 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
2954 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
2956 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
2957 there are no operand types.
2959 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
2961 * v850-opc.c (D9_RELAX): Renamed from D9, all references
2963 (v850_operands): Make sure D22 immediately follows D9_RELAX.
2965 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
2967 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
2969 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
2971 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
2972 and sst.w instructions.
2974 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
2977 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
2979 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
2982 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
2984 * ppc-opc.c (PPCPWR2): Define.
2985 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
2988 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
2990 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
2991 field for movhu instruction.
2993 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
2994 cast value to "long" not "signed long" to keep hpux10
2997 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
2999 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
3002 * mn10300-opc.c (FMT*): Remove definitions.
3004 * mn10300-opc.c (mn10300_opcodes): Fix destination register
3005 for shift-by-register opcodes.
3007 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
3008 into [AD][MN][01] for encoding the position of the register
3011 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
3013 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
3014 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
3016 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
3018 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
3019 Fix various typos. Add "PAREN" operand.
3020 (MEM, MEM2): Define.
3021 (mn10300_opcodes): Surround all memory addresses with "PAREN"
3022 operands. Fix several typos.
3024 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
3027 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
3029 * mn10300-opc.c (FMT_XX): Renumber starting at one.
3030 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
3032 (mn10300_opcodes): Break opcode format out into its own field.
3033 Update many operand fields to deal with signed vs unsigned
3034 issues. Fix one or two typos in the "mov" instruction
3035 opcode, mask and/or operand fields.
3037 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3039 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
3040 m68851 wasn't reset.
3042 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
3044 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
3045 all opcodes. Very rough cut at operands for all opcodes.
3047 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
3050 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
3052 * mn10200-opc.c, mn10300-opc.c: New files.
3053 * mn10200-dis.c, mn10300-dis.c: New files.
3054 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
3055 * disassemble.c: Break mn10x00 support into 10200 and 10300
3057 * configure.in: Likewise.
3058 * configure: Rebuilt.
3060 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3062 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
3064 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
3066 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
3068 * disassemble (ARCH_mn10x00): Define.
3069 (disassembler): Handle bfd_arch_mn10x00.
3070 * configure.in: Recognize bfd_mn10x00_arch.
3071 * configure: Rebuilt.
3073 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
3075 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
3076 accordingly. Don't declare functions using op_rtn.
3078 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
3080 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
3081 params to be more standard.
3082 * (disassemble): Print absolute addresses and symbolic names for
3083 branch and jump targets.
3084 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
3086 * (v850_opcodes): Add breakpoint insn.
3088 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
3090 * m68k-opc.c: Move the fmovemx data register cases before the
3091 other cases, so that they get recognized before the data register
3092 does gets treated as a degenerate register list.
3094 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
3096 * mips-opc.c: Add a case for "div" and "divu" with two registers
3097 and a destination of $0.
3099 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
3101 * mips-dis.c (print_insn_arg): Add prototype.
3102 (_print_insn_mips): Ditto.
3104 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
3106 * mips-dis.c (print_insn_arg): Print condition code registers as
3109 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
3111 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
3113 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
3115 * v850-dis.c (disassemble): Make static. Provide prototype.
3117 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
3119 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
3122 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
3124 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
3125 ']' characters into the output stream.
3126 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
3127 Add "memop" field to all opcodes (for the disassembler).
3128 Reorder opcodes so that "nop" comes before "mov" and "jr"
3129 comes before "jarl".
3131 * v850-dis.c (print_insn_v850): Fix typo in last change.
3133 * v850-dis.c (print_insn_v850): Properly handle disassembling
3134 a two byte insn at the end of a memory region when the memory
3135 region's size is only two byte aligned.
3137 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
3139 * v850-dis.c (v850_reg_names): Define.
3140 (v850_sreg_names, v850_cc_names): Likewise.
3141 (disassemble): Very rough cut at printing operands (unformatted).
3143 * v850-opc.c (BOP_MASK): Fix.
3144 (v850_opcodes): Fix mask for jarl and jr.
3146 * v850-dis.c: New file. Skeleton for disassembler support.
3147 * Makefile.in Remove v850 references, they're not needed here.
3148 * configure.in: Add v850-dis.o when building v850 toolchains.
3149 * configure: Rebuilt.
3150 * disassemble.c (disassembler): Call v850 disassembler.
3152 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
3153 (insert_d8_6, extract_d8_6): New functions.
3154 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
3155 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
3157 (IF4A, IF4B): Use "D7" instead of "D7S".
3158 (IF4C, IF4D): Use "D8_7" instead of "D8".
3159 (IF4E, IF4F): New. Use "D8_6".
3160 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
3161 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
3163 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
3164 (v850_operands): Change D16 to D16_15, use special insert/extract
3165 routines. New new D16 that uses the generic insert/extract code.
3166 (IF7A, IF7B): Use D16_15.
3167 (IF7C, IF7D): New. Use D16.
3168 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
3170 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
3171 message. Issue an error if the branch offset is odd.
3173 * v850-opc.c: Add notes about needing special insert/extract
3174 for all the load/store insns, except "ld.b" and "st.b".
3176 * v850-opc.c (insert_d22, extract_d22): New functions.
3177 (v850_operands): Use insert_d22 and extract_d22 for
3179 (insert_d9): Fix range check.
3181 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3183 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
3184 and set bits field to D9 and D22 operands.
3186 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
3188 * v850-opc.c (v850_operands): Define SR2 operand.
3189 (v850_opcodes): "ldsr" uses R1,SR2.
3191 * v850-opc.c (v850_opcodes): Fix opcode specs for
3192 sld.w, sst.b, sst.h, sst.w, and nop.
3194 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
3196 * v850-opc.c (v850_opcodes): Add null opcode to mark the
3197 end of the opcode table.
3199 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3201 * d10v-opc.c (pre_defined_registers): Added register pairs,
3202 "r0-r1", "r2-r3", etc.
3204 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
3206 * v850-opc.c (v850_operands): Make I16 be a signed operand.
3207 Create I16U for an unsigned 16bit mmediate operand.
3208 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
3210 * v850-opc.c (v850_operands): Define EP operand.
3211 (IF4A, IF4B, IF4C, IF4D): Use EP.
3213 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
3214 with immediate operand, "movhi". Tweak "ldsr".
3216 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
3217 correct. Get sld.[bhw] and sst.[bhw] closer.
3219 * v850-opc.c (v850_operands): "not" is a two byte insn
3221 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
3223 * v850-opc.c (v850_operands): D16 inserts at offset 16!
3225 * v850-opc.c (two): Get order of words correct.
3227 * v850-opc.c (v850_operands): I16 inserts at offset 16!
3229 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
3230 register source and destination operands.
3231 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
3233 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
3234 same thinko in "trap" opcode.
3236 * v850-opc.c (v850_opcodes): Add initializer for size field
3239 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
3240 Add D8 for 8-bit unsigned field in short load/store insns.
3241 (IF4A, IF4D): These both need two registers.
3242 (IF4C, IF4D): Define. Use 8-bit unsigned field.
3243 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
3244 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
3245 for "ldsr" and "stsr".
3246 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
3249 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
3250 short store word (sst.w).
3252 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3254 * v850-opc.c (v850_operands): Added insert and extract fields,
3255 pointers to functions that handle unusual operand encodings.
3257 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
3259 * v850-opc.c (v850_opcodes): Enable "trap".
3261 * v850-opc.c (v850_opcodes): Fix order of displacement
3262 and register for "set1", "clr1", "not1", and "tst1".
3264 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
3266 * v850-opc.c (v850_operands): Add "B3" support.
3267 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
3270 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
3272 * v850-opc.c: Close unterminated comment.
3274 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3276 * v850-opc.c (v850_operands): Add flags field.
3277 (v850_opcodes): add move opcodes.
3279 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
3281 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
3282 * configure: (bfd_v850v_arch) Add new case.
3283 * configure.in: (bfd_v850_arch) Add new case.
3284 * v850-opc.c: New file.
3286 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
3288 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
3290 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3292 * d10v-opc.c: Add additional information to the opcode
3293 table to help determinine which instructions can be done
3296 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
3298 * mpw-make.sed: Update editing of include pathnames to be
3301 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
3303 * arm-opc.h: Added "bx" instruction definition.
3305 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
3307 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
3309 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3311 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
3313 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3315 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
3317 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
3319 * makefile.vms: Update for alpha-opc changes.
3321 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
3323 * i386-dis.c (print_insn_i386): Actually return the correct value.
3324 (ONE, OP_ONE): #ifdef out; not used.
3326 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3328 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
3329 Changed subi operand type to treat 0 as 16.
3331 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
3333 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
3336 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
3338 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
3339 memory transfer instructions. Add new format string entries %h and %s.
3340 * arm-dis.c: (print_insn_arm): Provide decoding of the new
3343 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3345 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
3346 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
3348 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
3350 * alpha-dis.c (print_insn_alpha_osf): Remove.
3351 (print_insn_alpha_vms): Remove.
3352 (print_insn_alpha): Make globally visible. Chose the register
3353 names based on info->flavour.
3354 * disassemble.c: Always return print_insn_alpha for the alpha.
3356 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3358 * d10v-dis.c (dis_long): Handle unknown opcodes.
3360 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3362 * d10v-opc.c: Changes to support signed and unsigned numbers.
3363 All instructions with the same name that have long and short forms
3364 now end in ".l" or ".s". Divs added.
3365 * d10v-dis.c: Changes to support signed and unsigned numbers.
3367 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3369 * d10v-dis.c: Change all functions to use info->print_address_func.
3371 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3373 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
3374 move ccr/sr insns more strict so that the disassembler only
3375 selects them when the addressing mode is data register.
3377 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3378 * d10v-opc.c (pre_defined_registers): Declare.
3379 * d10v-dis.c (print_operand): Now uses pre_defined_registers
3380 to pick a better name for the registers.
3382 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
3384 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
3385 operands for fexpand and fpmerge. From Christian Kuehnke
3386 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
3388 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
3390 * alpha-dis.c (print_insn_alpha): No longer the user-visible
3391 print routine. Take new regnames and cpumask arguments.
3392 Kill the environment variable nonsense.
3393 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
3394 (print_insn_alpha_vms): New function. Do VMS style regnames.
3395 * disassemble.c (disassembler): Test bfd flavour to pick
3396 between OSF and VMS routines. Default to OSF.
3398 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
3400 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
3401 * configure: Rebuild.
3402 * Makefile.in (install): Use @INSTALL_SHLIB@.
3404 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
3406 * configure: (bfd_d10v_arch) Add new case.
3407 * configure.in: (bfd_d10v_arch) Add new case.
3408 * d10v-dis.c: New file.
3409 * d10v-opc.c: New file.
3410 * disassemble.c (disassembler) Add entry for d10v.
3412 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3414 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
3415 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
3417 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
3419 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
3420 distinguish between variants of the instruction set.
3421 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
3422 distinguish between variants of the instruction set.
3424 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
3426 * i386-dis.c (print_insn_i8086): New routine to disassemble using
3427 the 8086 instruction set.
3428 * i386-dis.c: General cleanups. Make most things static. Add
3429 prototypes. Get rid of static variables aflags and dflags. Pass
3430 them as args (to almost everything).
3432 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
3434 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
3436 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
3438 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
3439 if the next arg is marked with SRC_IN_DST. Gross.
3441 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
3442 we're looking for and find EXR.
3444 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
3445 if we're looking for KBIT and we don't find it.
3447 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
3450 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
3451 3bit immediate operands.
3453 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
3455 * Released binutils 2.7.
3457 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
3458 <kkaempf@progis.ac-net.de>.
3460 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
3462 * alpha-opc.c: Correct second case of "mov" to use OPRL.
3464 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
3466 * sparc-dis.c (print_insn_sparclite): New routine to print
3467 sparclite instructions.
3469 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
3471 * m68k-opc.c (m68k_opcodes): Add coldfire support.
3473 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
3475 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
3476 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
3477 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
3479 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
3481 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
3482 Use autoconf-set values.
3483 (docdir, oldincludedir): Removed.
3484 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
3486 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
3488 * alpha-opc.c: New file.
3489 * alpha-opc.h: Remove.
3490 * alpha-dis.c: Complete rewrite to use new opcode table.
3491 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
3492 * configure: Rebuild with autoconf 2.10.
3493 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
3494 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
3496 (alpha-opc.o): New target.
3498 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
3500 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
3501 Set imm_added_to_rs1 even if the source and destination register
3504 * sparc-opc.c: Add some two operand forms of the wr instruction.
3506 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
3508 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
3511 * disassemble.c (disassembler): Handle H8/S.
3512 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
3514 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
3516 * sparc-opc.c: Add beq/teq as aliases for be/te.
3518 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
3519 <sergei@msil.sps.mot.com>.
3521 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
3523 * makefile.vms: New file.
3525 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
3527 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
3529 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
3532 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
3534 * i386-dis.c (OP_OFF): Call append_prefix.
3536 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3538 * ppc-opc.c (instruction encoding macros): Add explicit casts to
3539 unsigned long to silence a warning from the Solaris PowerPC
3542 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
3544 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
3546 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
3548 * sparc-dis.c (X_IMM,X_SIMM): New macros.
3550 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
3551 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
3552 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
3553 cpush, cpusha, cpull sparclet insns.
3555 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
3557 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
3559 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
3561 * sparc-opc.c: Set F_FBR on floating point branch instructions.
3562 Set F_FLOAT on other floating point instructions.
3564 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3566 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
3568 (powerpc_opcodes): Add 860/821 specific SPRs.
3570 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
3572 * configure.in: Permit --enable-shared to specify a list of
3573 directories. Set and substitute BFD_PICLIST.
3574 * configure: Rebuild.
3575 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
3576 uses. Set to @BFD_PICLIST@.
3578 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
3580 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
3581 not "abs", which may be needed for the absolute in something
3582 like btst #0,@10:8. Print L_3 immediates separately from other
3583 immediates. Change ABSMOV reference to ABS8MEM.
3585 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
3587 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
3588 (current_arch_mask): New static global.
3589 (compute_arch_mask): New static function.
3590 (print_insn_sparc): Delete sparc_v9_p. New static local
3591 current_mach. Resort opcode table if current_mach changes.
3592 Generalize "insn not supported" test.
3593 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
3594 Delete test for v9/!v9.
3595 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
3597 (brfc): Split into CBR and FBR for coprocessor/fp branches.
3598 (brfcx): Renamed to FBRX.
3599 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
3600 coprocessor mnemonics are not supported on the sparclet).
3601 (condf): Renamed to CONDF.
3602 (SLCBCC2): Delete F_ALIAS flag.
3604 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
3606 * sparc-opc.c (sparc_opcodes): rd must be 0 for
3607 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
3609 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
3611 * Makefile.in (config.status): Depend upon BFD VERSION file, so
3612 that the shared library version number is set correctly.
3614 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
3616 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
3617 Miles Bader <miles@gnu.ai.mit.edu>.
3618 * configure: Rebuild.
3620 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
3622 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
3625 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
3627 * configure: Rebuild with autoconf 2.8.
3629 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
3631 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
3632 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
3634 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
3636 * configure.in: Don't set SHLIB or SHLINK to an empty string,
3637 since they appear as targets in Makefile.in.
3638 * configure: Rebuild.
3640 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
3642 * mpw-make.sed: Edit out shared library support bits.
3644 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
3646 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
3647 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
3648 (sparc_opcodes): Add sparclet insns.
3649 (sparclet_cpreg_table): New static local.
3650 (sparc_{encode,decode}_sparclet_cpreg): New functions.
3651 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
3653 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
3655 * i386-dis.c (index16): New static variable.
3656 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
3658 (OP_indirE): Return result of OP_E.
3659 (OP_E): Check for 16 bit addressing mode, and disassemble
3660 correctly. Optimised 32 bit case a little. Don't print
3661 "(base,index,scale)" when sib specifies only an offset.
3663 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
3665 * configure.in: Set and substitute SHLIB_DEP.
3666 * configure: Rebuild.
3667 * Makefile.in (SHLIB_DEP): New variable.
3668 (LIBIBERTY_LISTS, BFD_LIST): New variables.
3669 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
3670 COMMON_SHLIB, add them to piclist with appropriate modifications.
3671 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
3672 here: just use piclist.
3674 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
3676 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
3677 (print_insn_sparc): Rewrite v9/not-v9 tests.
3678 (compare_opcodes): Likewise.
3679 * sparc-opc.c (MASK_<ARCH>): Define.
3680 (v6,v7,v8,sparclite,v9,v9a): Redefine.
3681 (sparclet,v6notv9): Define.
3682 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
3683 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
3685 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
3687 * configure.in: Call AC_PROG_CC before configure.host.
3688 * configure: Rebuild.
3690 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
3692 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
3694 * i386-dis.c (onebyte_has_modrm): New static array.
3695 (twobyte_has_modrm): New static array.
3696 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
3698 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
3700 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
3703 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
3705 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
3708 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
3710 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
3711 m68010up, not just m68020up | cpu32.
3713 * Makefile.in (SONAME): New variable.
3714 ($(SHLINK)): Make a link to the transformed name, as well.
3715 (stamp-tshlink): New target.
3716 (install): Skip stamp-tshlink during install.
3718 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
3720 * configure.in: Call AC_ARG_PROGRAM.
3721 * configure: Rebuild.
3722 * Makefile.in (program_transform_name): New variable.
3723 (install): Transform library name before installing it.
3725 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
3727 * i960-dis.c (mem): Add HX dcinva instruction.
3729 Support for building as a shared library, based on patches from
3730 Alan Modra <alan@spri.levels.unisa.edu.au>:
3731 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
3732 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
3733 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
3734 * configure: Rebuild.
3735 * Makefile.in (ALLLIBS): New variable.
3736 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
3737 (COMMON_SHLIB, SHLINK): New variables.
3738 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
3739 (STAGESTUFF): Remove variable.
3740 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
3741 (stamp-piclist, piclist): New targets.
3742 ($(SHLIB), $(SHLINK)): New targets.
3743 ($(OFILES)): Depend upon stamp-picdir.
3744 (disassemble.o): Build twice if PICFLAG is set.
3745 (MOSTLYCLEAN): Add pic/*.o.
3746 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
3747 (distclean): Remove pic and stamp-picdir.
3748 (install): Install shared libraries.
3749 (stamp-picdir): New target.
3751 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
3753 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
3754 Print unknown instruction as "unknown", rather than in hex.
3756 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
3758 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
3760 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
3762 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
3764 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
3766 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
3767 when necessary. From Ulrich Drepper
3768 <drepper@myware.rz.uni-karlsruhe.de>.
3770 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
3772 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
3773 sparc_num_opcodes. Update architecture enum values.
3774 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
3775 (sparc_opcode_lookup_arch): New function.
3776 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
3777 (sparc_opcodes): Add v9a shutdown insn.
3779 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
3781 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
3782 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
3784 (print_insn_sparc64): Deleted.
3785 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
3788 * sparc-opc.c (architecture_pname): Add v9a.
3790 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
3792 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
3793 incorrectly defined as 0x16 when it should be 0x15.
3794 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
3795 (alpha_insn_set): added cvtst and cvttq float ops. Also added
3796 excb (exception barrier) which is defined in the Alpha
3797 Architecture Handbook version 2.
3798 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
3799 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
3800 disassembled as or, for example.
3802 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
3804 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
3805 (_print_insn_mips): Change i from int to unsigned int.
3807 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
3809 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
3810 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
3812 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
3814 * i386-dis.c: Added Pentium Pro instructions.
3816 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3818 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
3821 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3823 * sh-opc.h (sh_nibble_type): Added REG_B.
3824 (sh_arg_type): Added A_REG_B.
3825 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
3827 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
3829 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
3831 * disassemble.c (disassembler): Use new bfd_big_endian macro.
3833 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
3835 * Makefile.in (distclean): Remove stamp-h. From Ronald
3836 F. Guilmette <rfg@monkeys.com>.
3838 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
3840 From David Mosberger-Tang <davidm@azstarnet.com>:
3841 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
3844 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
3846 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
3847 (sh_table): Added many SH3 opcodes.
3848 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
3850 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3852 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
3853 (subco,subco.): Mark this PPC, not PPCCOM.
3855 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
3857 * configure: Rebuild with autoconf 2.7.
3859 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
3861 * configure: Rebuild with autoconf 2.6.
3863 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
3865 * configure.in: Sort list of architectures. Accept but do nothing
3866 for alliant, convex, pyramid, romp, and tahoe.
3868 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
3870 * a29k-dis.c (print_special): Change num to unsigned int.
3872 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
3874 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
3877 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
3879 * configure.in: Call AC_CHECK_PROG to find and cache AR.
3880 * configure: Rebuilt.
3882 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
3884 * configure.in: Add case for bfd_i860_arch.
3885 * configure: Rebuild.
3887 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
3889 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
3890 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
3891 (NEXTDOUBLE): Likewise.
3892 (print_insn_m68k): Don't match fmoveml if there is more than one
3893 register in the list.
3894 (print_insn_arg): Handle a place of '8' for a type of 'L'.
3896 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
3898 * m68k-opc.c: Use #W rather than #w.
3899 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
3901 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
3903 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
3904 and likewise for all the dbxx opcodes.
3906 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
3908 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
3910 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
3912 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
3913 the VR4100 specific instructions to the mips_opcodes structure.
3915 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
3917 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
3918 ugly Metrowerks bug in CW6, is fixed in CW7.
3920 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
3922 * ppc-opc.c (whole file): Add flags for common/any support.
3924 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
3926 * Makefile.in (BISON): Remove macro.
3927 (FLAGS_TO_PASS): Remove BISON.
3929 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
3931 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
3933 * m68k-dis.c (print_insn_m68k): Recognize all two-word
3934 instructions that take no args by looking at the match mask.
3935 (print_insn_arg): Always print "%" before register names.
3936 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
3937 [case '_']: Don't print "@#" before address.
3938 [case 'J']: Use "%s" as format string, not register name.
3939 [case 'B']: Treat place == 'C' like 'l' and 'L'.
3941 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
3943 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
3946 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
3948 From David Mosberger-Tang <davidm@azstarnet.com>
3950 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
3951 (alpha_insn_set): added definitions for VAX floating point
3952 instructions (Unix compilers don't generate these, but handcoded
3953 assembly might still use them).
3955 * alpha-dis.c (print_insn_alpha): added support for disassembling
3956 the miscellaneous instructions in the Alpha instruction set.
3958 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
3960 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
3961 no longer create sysdep.h, sed ppc-opc.c to work around a
3962 serious Metrowerks C bug.
3963 * mpw-make.in: Remove.
3964 * mpw-make.sed: New file, used by mpw-configure to edit
3965 Makefile.in into an MPW makefile.
3967 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
3969 * Makefile.in (maintainer-clean): New synonym for realclean.
3971 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
3973 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
3974 which use '0', '1', and '2' instead. Specify the proper size for
3975 a pmove immediate operand. Correct the pmovefd patterns to be
3976 moves to a register, not from a register.
3977 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
3979 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
3981 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
3982 %psr, %wim, %tbr as F_NOTV9.
3984 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
3986 * Makefile.in (Makefile): Just rebuild Makefile when running
3988 (config.h, stamp-h): New targets.
3989 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
3990 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
3991 rebuilding config.h.
3992 * configure: Rebuild.
3994 * mips-opc.c: Change unaligned loads and stores with "t,A"
3995 operands to use "t,A(b)".
3997 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
3999 * sh-dis.c (print_insn_shx): Add F_FR0 support.
4001 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4003 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
4004 until 3 instead of until 2.
4006 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
4008 * Makefile.in (ALL_CFLAGS): Define.
4009 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
4010 (MOSTLYCLEAN): Add config.log.
4011 (distclean): Don't remove config.log.
4012 * configure.in: Substitute HDEFINES.
4013 * configure: Rebuild.
4015 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4017 * sh-opc.h (sh_arg_type): Add F_FR0.
4018 (sh_table, case fmac): Add F_FR0 as first argument.
4020 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4022 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
4024 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
4026 * sparc-dis.c: Remove all references to NO_V9.
4028 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
4030 * aclocal.m4: Just include ../bfd/aclocal.m4.
4031 * configure: Rebuild.
4033 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
4035 * sparc-dis.c (X_DISP19): Define.
4036 (print_insn, case 'G'): Use it.
4037 (print_insn, case 'L'): Sign extend displacement.
4039 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
4041 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
4042 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
4043 host_makefile_frag or frags.
4044 * aclocal.m4: New file.
4045 * configure: Rebuild.
4046 * Makefile.in (INSTALL): Set to @INSTALL@.
4047 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
4048 (INSTALL_DATA): Set to @INSTALL_DATA@.
4050 (AR_FLAGS): Set to rc rather than qc.
4051 (CC): Define as @CC@.
4052 (CFLAGS): Set to @CFLAGS@.
4053 (@host_makefile_frag@): Remove.
4054 (config.status): Remove dependency upon @frags@.
4056 * configure.in: ../bfd/config.bfd now just sets shell variables.
4057 Use them rather than looking through target Makefile fragments.
4058 * configure: Rebuild.
4060 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4062 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
4064 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
4066 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
4067 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
4070 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
4071 (lookup_{name,value}): New functions.
4072 (prefetch_table): New static local.
4073 (sparc_{encode,decode}_prefetch): New functions.
4074 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
4076 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4078 * sh-opc.h: Add blank lines to improve readabililty of sh3e
4081 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4083 * sh-dis.c: Correct comment on first line of file.
4085 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
4087 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
4089 * sparc-opc.c (asi, membar): New static locals.
4090 (sparc_{encode,decode}_{asi,membar}): New functions.
4091 (sparc_opcodes, membar insn): Fix.
4092 * sparc-dis.c (print_insn): Call sparc_decode_asi.
4093 Support decoding of membar masks.
4096 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
4098 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
4100 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
4102 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
4103 and likewise for the other branches. Add bhs as an alias for bcc,
4104 and likewise for the size variants. Add dbhs as an alias for
4107 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
4109 * sh-opc.h (FP sts instructions): Update to match reality.
4111 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
4113 * m68k-dis.c: (fpcr_names): Add % before all register names.
4114 (reg_names): Likewise.
4115 (print_insn_arg): Don't explicitly print % before register names.
4116 Add % before register names in static array names. In case 'r',
4117 print data registers as `@(Dn)', not `Dn@'. When printing a
4118 memory address, don't print @# before it.
4119 (print_indexed): Change base_disp and outer_disp from int to
4120 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
4121 syntax. Sign extend 8 byte displacement correctly.
4122 (print_base): Print using MIT syntax. Print zpc when appropriate.
4123 Change parameter disp from int to bfd_vma.
4125 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
4128 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
4130 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
4131 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
4132 * sh-opc.h (sh_arg_type): Add new operand types.
4133 (sh_table): Add new opcodes from SH3E Floating Point ISA.
4135 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4137 * Makefile.in (distclean): Remove generated file config.h.
4139 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
4141 * Makefile.in (distclean): Remove generated file config.h.
4143 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
4145 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
4147 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
4149 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
4150 rather than numopcodes. Use m68k_opcodes rather than removed
4151 opcode function. Don't check F_ALIAS.
4152 (print_insn_arg): Change first parameter to be const char *.
4153 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
4154 (m68k-opc.o): New target.
4155 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
4156 * configure: Rebuild.
4158 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
4160 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
4161 (opcode_bits, opcode_hash_table): New variables.
4162 (opcodes_initialized): Renamed from opcodes_sorted.
4163 (build_hash_table): New function.
4164 (is_delayed_branch): Use hash table.
4165 (print_insn): Renamed from print_insn_sparc, made static.
4166 Build and use hash table. If !sparc64, ignore sparc64 insns,
4167 and vice-versa if sparc64.
4168 (print_insn_sparc, print_insn_sparc64): New functions.
4169 (compare_opcodes): Move sparc64 opcodes to end.
4170 Print commutative insns with constant second.
4171 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
4173 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
4175 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
4176 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
4177 avoids printing a delay slot in a delay slot.
4178 * sh-opc.h (sh_table): Fully bracket last entry.
4180 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
4182 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
4184 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
4186 * configure.in: Get host_makefile_frag from ${srcdir}.
4188 * configure.in: Autoconfiscated. Check for string[s].h. Create
4189 config.h from config.in. Don't set up sysdep.h link.
4190 * sysdep.h: New file.
4191 * configure, config.in: New files, generated from configure.in.
4192 * Makefile.in: Updated to be processed autoconf-style.
4193 (distclean): Keep sysdep.h. Remove config.log and config.cache.
4194 (Makefile): Depend on config.status.
4195 (config.status): New rule.
4196 * configure.bat: Update Makefile substitutions.
4198 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
4200 * mips-opc.c (L1): Define.
4201 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
4202 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
4205 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
4207 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
4208 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
4209 have multiple add units but only a single logical unit.
4211 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
4212 shifted by 18, without any insertion or extraction function.
4213 (insert_cr, extract_cr): Remove.
4215 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4217 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
4220 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
4222 * mpw-config.in: Add sh and i386 configs, remove sparc config.
4223 * sh-opc.h: Add copyright.
4225 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
4227 * Makefile.in (crunch-m68k): Delete extra target accidentally
4228 checked in a while ago.
4230 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
4232 * sh-opc.h (sh_table): Add SH3 support.
4234 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
4236 * sh-opc.h: Added bsrf and braf.
4238 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
4240 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
4241 bogus [ls]fm{ea,fd} patterns.
4243 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
4244 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
4245 initialize it from memory. Make function static.
4246 (print_insn_{big,little}_arm): New functions.
4247 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
4248 the correct endianness.
4250 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
4252 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
4255 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4257 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
4258 17th, so that it builds again using GCC as the compiler.
4260 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4262 * mips-dis.c (print_insn_little_mips): Cast return value from
4263 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
4264 expects an unsigned long, and that might be fewer words of
4265 argument storage (e.g., if bfd_vma is long long on a 32-bit
4267 (print_insn_big_mips): Likewise with bfd_getb32 value.
4268 (_print_insn_mips): Now static.
4270 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
4272 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
4273 gcc memory hog problem with initializer is fixed.
4275 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
4277 Merge in support for Mac MPW as a host.
4278 (Old change descriptions retained for informational value.)
4280 * mpw-config.in (archname): Compute from the config.
4281 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
4283 * mpw-config.in (target_arch): Compute from canonical target.
4284 (m68k, mips, powerpc, sparc): Add architectures.
4285 * mpw-make.in (disassemble.c.o): Add.
4286 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
4288 * mpw-config.in (BFD_MACHINES): Set to a default value.
4289 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
4291 * mpw-make.in (CSEARCH): Add extra-include to search path.
4293 * mpw-config.in (varargs.h): Don't create.
4294 (sysdep.h): Create using forward-include.
4295 * mpw-make.in (CSEARCH): Add include/mpw to search path.
4297 * mpw-config.in: New file, MPW version of configure.in.
4298 * mpw-make.in: New file, MPW version of Makefile.in.
4300 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4302 * alpha-dis.c (print_insn_alpha): Put empty statement after
4305 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
4307 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
4308 (low_sign_extend): Likewise.
4309 (get_field): Delete unused function.
4310 (set_field, deposit_14, deposit_21): Likewise.
4312 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4314 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
4317 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
4319 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
4321 * alpha-opc.h (OSF_ASMCODE): define
4322 print pal-code names as defined in App C of the
4323 Alpha Architecture Reference Manual
4325 * alpha-dis.c: cleaned up output
4326 print stylized code forms as defined in App A.4.3 of the
4327 Alpha Architecture Reference Manual
4329 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
4331 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
4333 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
4336 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
4338 * m68k-dis.c (opcode): New function. Returns address of opcode
4339 table entry given index, even if the opcode table was split to
4340 work around gcc bugs.
4341 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
4343 (BREAK_UP_BIG_DECL): Make secondary array static and const.
4344 (reg_names): Now const.
4345 (print_insn_arg): Arrays cacheFieldName and names now const.
4346 (print_indexed): Array scales now const.
4348 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
4350 * ppc-opc.c: Sort recently added instructions by minor opcode
4351 number within major opcode number.
4353 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
4355 * hppa-dis.c: Include libhppa.h.
4357 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
4359 * mips-opc.c: Change dli to use M_DLI, and add dla.
4361 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4363 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
4365 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
4367 * mips-opc.c: Add r4650 mul instruction.
4369 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
4371 * mips-opc.c: Add uld and usd macros for unaligned double load and
4374 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
4376 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
4377 mfdcr, mtdcr, icbt, iccci.
4379 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
4381 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
4382 signed char fields to shorts, more portable.
4384 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
4386 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
4387 char fields as signed chars, since they may have negative values.
4389 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
4391 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
4392 (mycroft@netbsd.org).
4394 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
4396 From "Logg, Ed" <elogg@ea.com>:
4397 * ppc-opc.c (extract_bdm): Correct parenthezisation.
4398 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
4401 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
4403 * ppc-opc.c: Changes based on patch from David Edelsohn
4404 <edelsohn@mhpcc.edu>.
4405 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
4408 (insert_tbr): New static function.
4409 (extract_tbr): New static function.
4410 (XFXFXM_MASK, XFXM): Define.
4411 (XSPRBAT_MASK, XSPRG_MASK): Define.
4412 (powerpc_opcodes): Add instructions to access special registers by
4413 name. Add mtcr and mftbu.
4415 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
4417 * mips-opc.c (P3): Define.
4418 (mips_opcodes): Add mad and madu.
4420 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
4422 * configure.in: Add W65 support.
4423 * disassemble.c: Likewise.
4424 * w65-opc.h, w65-dis.c: New files.
4426 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4428 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
4431 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4433 * mips-opc.c: Add dli as a synonym for li.
4435 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4437 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
4438 print something for reserved opcode values, even if it won't
4441 * mips-dis.c (_print_insn_mips): When initializing, shift right
4442 and mask, to avoid sign extension problems on the Alpha.
4444 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
4447 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
4449 * sh-opc.h (mov.l gbr): Get direction right.
4450 * sh-dis.c (print_insn_shx): New function.
4451 (print_insn_shl, print_insn_sh): Call print_insn_shx to
4452 print opcodes with right byte order.
4454 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
4456 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
4457 to avoid conflicts with getopt.
4459 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4461 * hppa-dis.c (print_insn_hppa): Read the instruction using
4462 bfd_getb32, so that it works on a little endian or 64 bit host.
4463 Remove unused local variable op.
4465 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4467 * mips-opc.c: Use or instead of addu for pseudo-op move, since
4468 addu does not work correctly if -mips3.
4470 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4472 * a29k-dis.c (print_special): Add special register names defined
4473 on 29030, 29040 and 29050.
4474 (print_insn): Handle new operand type 'I'.
4476 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4478 * Makefile.in (INSTALL): Use top level install.sh script.
4480 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4482 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
4483 that it works on a little endian host.
4485 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
4487 * configure.in: Use ${config_shell} when running config.bfd.
4489 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4491 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
4493 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4495 * a29k-dis.c (print_insn): Print the opcode.
4497 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4499 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
4501 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
4503 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
4505 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4507 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
4508 which store a value into memory.
4510 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
4512 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
4513 * arm-dis.c, arm-opc.h: New files.
4515 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
4517 * Makefile.in (ns32k-dis.o): Add dependency.
4518 * ns32k-dis.c (print_insn_arg): Declare initialized local as
4519 string, not as array of chars.
4521 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4523 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
4525 * sparc-opc.c: Added sparclite extended FP operations, and
4526 versions of v9 impdep* instructions permitting specification of
4529 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4531 * i960-dis.c (reg_names): Now const.
4532 (struct sparse_tabent): New type, copied from array type in mem
4534 (ctrl): Local static array ctrl_tab now const.
4535 (cobr): Local static array cobr_tab now const.
4536 (mem): Local variables reg1, reg2, reg3 now point to const. Local
4537 static variable mem_tab no longer explicitly initialized. Changed
4538 mem_init to const array of struct sparse_tabent.
4539 (reg): Local static variable reg_tab no longer explicitly
4540 initialized. Changed reg_init to const array of struct
4542 (ea): Local static array scale_tab now const.
4544 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
4547 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
4549 * configure.bat: the disassember needs to be enabled for
4550 "objdump -d" to work in djgpp.
4552 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4554 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
4555 (invalid_float): Enabled general version, doesn't require running
4556 on ns32k host. Changed to take char* argument, and test for
4557 explicitly specified sizes, instead of using sizeof() on host CPU
4559 (INVALID_FLOAT): Cast first argument.
4560 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
4561 list_P032, list_M032): Now const.
4562 (optlist, list_search): Made appropriate arguments now point to
4564 (print_insn_arg): Changed static array of one-character-string
4565 pointers into a static const array of characters; fixed sprintf
4566 statement accordingly.
4568 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
4570 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
4571 from distribution. A ns32k-dis.c from a previous distribution has
4572 been brought up to date and supports the new interface.
4574 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
4576 * configure.in: add bfd_ns32k_arch target support.
4578 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
4579 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
4581 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
4583 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
4586 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
4588 * h8300-dis.c, mips-dis.c: Don't use true and false.
4590 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
4592 * configure.in: Change --with-targets to --enable-targets.
4594 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
4596 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
4597 opcodes to the first instruction with that opcode, to speed
4598 disassembly of large files. From ralphc@pyramid.com (Ralph
4601 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4603 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
4605 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
4607 * configure.bat: update to latest makefile.in
4609 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
4611 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
4612 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
4613 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
4614 slot insn is in a delay slot.
4615 * z8k-opc.h: (resflg): Fix patterns.
4616 * h8500-opc.h Fix CR insn patterns.
4618 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4620 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
4621 "cmpl" before POWER versions, so that gas -many uses them.
4623 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
4625 * disassemble.c: New file.
4626 * Makefile.in (OFILES): Add disassemble.o.
4627 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
4628 * configure.in: Define ARCHDEFS in Makefile. Code taken from
4629 binutils/configure.in.
4631 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
4632 opcode being examined.
4634 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4636 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
4637 (insert_ral, insert_ram, insert_ras): New functions.
4638 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
4639 RAS for store with update.
4641 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4643 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
4644 (edelsohn@npac.syr.edu).
4646 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4648 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
4651 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
4653 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
4655 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4657 * ppc-opc.c (powerpc_operands): The signedp field has been
4658 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
4659 instead. Add new operand SISIGNOPT.
4660 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
4661 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
4662 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
4665 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4667 * i386-dis.c (struct private): Renamed to dis_private. `private'
4668 is a reserved word for dynix cc.
4670 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4672 * configure.in: Change error message to refer to bfd/config.bfd
4673 rather than bfd/configure.in.
4675 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
4677 * ppc-opc.c: Define POWER2 as short alias flag.
4678 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
4681 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4683 * i960-dis.c (print_insn_i960): Don't read a second word for
4684 opcodes 0, 1, 2 and 3.
4686 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4688 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
4690 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4692 * m68881-ext.c: Removed; no longer used.
4693 * Makefile.in: Changed accordingly.
4695 * m68k-dis.c (ext_format_68881): Don't declare.
4696 (print_insn_m68k): If an instruction uses place 'i', it uses at
4697 least four fixed bytes.
4698 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
4699 extended float, convert to double using floatformat_to_double, not
4700 ieee_extended_to_double, and fetch the data before converting it.
4702 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4704 * mips-opc.c: It's sqrt.s, not sqrt.w. From
4705 davidj@ICSI.Berkeley.EDU (David Johnson).
4707 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4709 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
4710 PowerPC uses bdnz[l][a].
4712 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4714 * dis-buf.c, i386-dis.c: Include sysdep.h.
4716 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4718 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
4720 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
4721 by Motorola PowerPC 601 with PPC_OPCODE_601.
4722 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
4723 Disassemble Motorola PowerPC 601 instructions as well as normal
4724 PowerPC instructions.
4726 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
4728 * i960-dis.c (reg, mem): Just use a static array instead of
4731 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4733 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
4734 condition name index if this is for a negated condition.
4736 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
4737 Floating point format for 'H' operand is backwards from normal
4738 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
4739 operands (fmpyadd and fmpysub), handle bizarre register
4740 translation correctly for single precision format.
4742 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
4743 or 'I' operands if the next format specifier is 'M' (fcmp
4744 condition completer).
4746 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4748 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
4749 single number giving a bitmask for the MB and ME fields of an M
4750 form instruction. Change NB to accept 32, and turn it into 0;
4751 also turn 0 into 32 when disassembling. Seperated SH from NB.
4752 (insert_mbe, extract_mbe): New functions.
4753 (insert_nb, extract_nb): New functions.
4754 (SC_MASK): Mask out SA and LK bits.
4755 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
4756 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
4757 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
4758 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
4759 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
4760 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
4761 (powerpc_macros): Define table of macro definitions.
4762 (powerpc_num_macros): Define.
4764 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
4765 if PPC_OPERAND_NEXT is set.
4767 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4769 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
4770 char. Retrieve contents using bfd_getl32 instead of shifting.
4772 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4774 * ppc-opc.c: New file. Opcode table for PowerPC, including
4775 opcodes for POWER (RS/6000).
4776 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
4777 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
4778 (CFILES): Add ppc-dis.c.
4779 (ppc-dis.o, ppc-opc.o): New targets.
4780 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
4782 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
4784 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
4785 No space before 'u', 'f', or 'N'.
4787 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
4789 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
4790 farther than we should.
4792 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
4794 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4796 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
4798 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
4800 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
4801 needs it, to prevent reading past the end of a section.
4803 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4805 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
4806 Removed t,A case for la; always use t,A(b) case.
4808 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4810 From Ted Lemen <mellon@pepper.ncd.com>
4811 * mips-dis.c (print_insn_arg): Handle 'k'.
4812 * mips-opc.c: Make cache use k, not t.
4814 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4816 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
4817 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
4818 FLOAT_FORMAT_CODE to put out floating point register names.
4820 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4822 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
4824 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4826 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
4828 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4830 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
4831 larger than 32. Moved dsxx32 variants first for disassembler.
4833 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4835 * z8kgen.c, z8k-opc.h: Add full lda information.
4837 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
4839 * hppa-dis.c (print_insn_hppa): Do not emit a space after
4840 movb instructions. Any necessary space will be emitted by
4841 the code to handle nullification completers.
4843 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4845 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
4847 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4849 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
4850 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
4852 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4854 * mips-opc.c: Correct lwu opcode value (book had it wrong).
4856 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
4858 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
4859 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
4861 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
4863 * m88k-dis.c (m88kdis): comment change. Remove space after
4865 (printop): handle new arg types DEC and XREG for m88110.
4867 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
4869 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
4870 type for absolute branch addresses. Delete special
4871 "ble" and "be" code in 'W' operand code.
4873 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4875 * mips-opc.c: Set hazard information correctly for branch
4876 likely instructions.
4878 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
4880 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
4881 info->fprintf_func for printing and info->print_address_func for
4884 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4886 * mips-opc.c: Set INSN_TRAP for tXX instructions.
4888 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4890 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
4891 Corrected second case of "b" for disassembler.
4893 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4895 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
4896 to BFD swapping routines to correspond to BFD name changes.
4898 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4900 * mips-opc.c: Change div machine instruction to be z,s,t rather
4901 than s,t. Change div macro to be d,v,t rather than d,s,t.
4902 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
4903 rem and remu which generates only the corresponding div
4904 instruction. This is for compatibility with the MIPS assembler,
4905 which only generates the simple machine instruction when an
4906 explicit destination of $0 is used.
4907 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
4909 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4911 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
4912 WR_31 hazard for bal, bgezal, bltzal.
4914 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4916 * hppa-dis.c (print_insn_hppa): Use print function
4917 from within the disassemble_info, not fprintf_filtered.
4919 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
4921 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
4922 Law, law@cs.utah.edu.)
4924 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4926 * mips-opc.c ("absu"): Removed.
4929 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4931 * mips-opc.c: Added r6000 and r4000 instructions and macros.
4932 Changed hazard information to distinguish between memory load
4933 delays and coprocessor load delays.
4935 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4937 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
4939 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4941 * configure.in: Don't pass cpu to config.bfd.
4943 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4945 * m88k-dis.c (m88kdis): Make class unsigned.
4947 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
4949 * alpha-dis.c (print_insn_alpha): One branch format case was
4950 missing the instruction name.
4952 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
4954 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
4955 Add the arch-specific auxiliary files.
4956 (OFILES): Remove the arch-specific auxiliary files
4957 and use BFD_MACHINES instead of DIS_LIBS.
4958 * configure.in: Set BFD_MACHINES based on --with-targets option.
4960 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4962 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
4965 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4967 * sparc-opc.c: Change CONST to const to deal with gcc
4968 -Dconst=__const -traditional.
4970 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
4972 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
4973 coprocessor instructions out of #if 0, and made them use new
4976 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
4978 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
4980 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
4982 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
4983 instruction, for use by the disassembler.
4985 * sparc-dis.c (SEX): Add sign extension macro. Replace many
4986 hand-coded sign extensions that depended on 32-bit host ints.
4987 FIXME, we still depend on big-endian host bitfield ordering.
4988 (sparc_print_insn): Set the insn_info_valid field, and the
4989 other fields that describe the instruction being printed.
4991 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
4993 * sparc-opc.c (call): Accept all 6 addressing modes valid for
4994 `jmp' instead of just one of them.
4996 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
4998 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
4999 (fput_fp_reg_r): Renamed from fput_reg_r.
5000 (fput_fp_reg): New function.
5001 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
5003 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
5005 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
5007 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
5009 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
5011 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
5012 don't output a space.
5014 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
5016 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
5018 * mips-opc.c: New file, containing opcode table from
5019 ../include/opcode/mips.h.
5020 * Makefile.in: Add it.
5022 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5024 * m88k-dis.c: New file, moved in from gdb and changed to use the
5025 new dis-asm.h disassembler interface.
5026 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
5027 (m88k-dis.o): New target.
5029 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
5031 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
5032 argument string const char * to correspond to opcode/mips.h.
5034 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
5036 * mips-dis.c: Updated to account for name changes in new version
5038 * Makefile.in: Added header file dependencies.
5040 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
5042 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
5044 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5046 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
5047 extend, rather than shifts.
5049 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
5051 * Makefile.in: Undo 15 June change.
5053 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
5055 * m68k-dis.c (print_insn_arg): Change return value to byte count
5057 * m68k-dis.c: Re-write to detect invalid operands before
5058 printing anything, so we can handle this the same way we
5059 handle invalid opcodes.
5061 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5063 * sh-dis.c, sh-opc.h: Understand some more opcodes.
5065 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
5067 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
5070 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5072 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
5074 * configure.in: Do make sysdep.h link.
5075 * Makefile.in: Search ../include. Don't search ../bfd.
5077 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
5079 Changes from Jeff Law, law@cs.utah.edu:
5080 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
5081 Do not print a space before the completers specified by
5084 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
5086 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
5087 defined, since gdb has been fixed.
5089 Changes from Jeff Law, law@cs.utah.edu:
5090 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
5091 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
5092 be a *disassemble_info, not a *FILE.
5093 * hppa-dis.c: Support 'd', '!', and 'a'.
5094 * hppa-dis.c: Support 's' to extract a 2 bit space register.
5095 * hppa-dis.c: Delete cases which are no longer needed.
5097 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
5099 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
5101 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
5103 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
5106 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
5108 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
5109 * configure.in: No longer need to configure to get sysdep.h.
5111 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
5113 * Patches from Jeffrey Law <law@cs.utah.edu>.
5114 * hppa-dis.c: Support 'I', 'J', and 'K' in output
5115 templates for 1.1 FP computational instructions.
5117 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5119 * h8500-dis.c (print_insn_h8500): Address argument is type
5121 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
5124 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
5125 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
5127 * sparc-dis.c (compare_opcodes): Move static declaration to
5130 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5132 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
5133 instruction, remove unimp hack from 'l' argument.
5135 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
5137 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
5140 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
5142 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
5143 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
5146 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5148 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
5149 arrays of string pointers to 2-d arrays of chars, to save
5152 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
5154 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
5155 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
5157 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5159 * hppa-dis.c: New file from Utah, adapted to new disassembler
5161 * Makefile.in: Include it.
5163 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5165 * sh-dis.c, sh-opc.h: New files.
5167 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5169 * alpha-dis.c, alpha-opc.h: New files.
5171 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
5173 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
5176 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
5178 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
5180 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
5182 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
5185 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
5187 * sparc-dis.c: Use fprintf_func a few places where I forgot,
5188 and double percent signs a few places.
5190 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
5192 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
5193 Use info->print_address_func not print_address.
5195 * dis-buf.c (generic_print_address): New function.
5197 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5199 * Makefile.in: Add sparc-dis.c.
5200 sparc-dis.c: New file, merges binutils and gdb versions as follows:
5202 Add `add' instruction to the set that get checked
5203 for a preceding `sethi' in order to print an absolute address.
5204 * (print_insn): Disassembly prefers real instructions.
5205 (is_delayed_branch): Speed up.
5206 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
5207 Still missing some float ops, and needs testing.
5208 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
5209 F_ALIAS. Use printf, not fprintf, when not passing a file
5211 (compare_opcodes): Check that identical instructions have
5212 identical opcodes, complain otherwise.
5215 * Include reg_names.
5217 Use dis-asm.h/read_memory_func interface.
5219 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
5221 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
5222 deliberately return non-zero to setjmp from longjmp. Otherwise
5223 this code fails to compile.
5225 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
5227 * m68k-dis.c: Fix prototype for fetch_arg().
5229 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
5231 * dis-buf.c: New file, for new read_memory_func interface.
5232 Makefile.in (OFILES): Include it.
5233 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
5234 Use new read_memory_func interface.
5236 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5238 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
5239 * h8500-opc.h: Fix couple of opcodes.
5241 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
5243 * Makefile.in: add dvi & installcheck targets
5245 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
5247 * Makefile.in: Update for h8500-dis.c.
5249 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5251 * h8500-dis.c, h8500-opc.h: New files
5253 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
5255 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
5256 ../include/dis-asm.h.
5257 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
5258 and ../gdb/m68k-pinsn.c).
5259 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
5260 and ../gdb/i386-pinsn.c).
5261 * m68881-ext.c: New file. Moved definition of
5262 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
5263 * Makefile.in: Adjust for new files.
5264 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
5265 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
5266 can be dis-assembled.
5268 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
5270 * mips-dis.c (print_insn_arg): Now returns void.
5272 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
5274 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
5275 files that use the macros.
5277 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
5279 * mips-dis.c: New file, from gdb/mips-pinsn.c.
5280 * Makefile.in (DIS_LIBS): Added mips-dis.o.
5281 (CFILES): Added mips-dis.c.
5283 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
5285 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
5286 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
5288 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
5290 * Makefile.in: Improve *clean rules.
5291 * configure.in: Allow a default host.
5293 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5295 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
5296 files include other sysdep files
5298 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5300 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
5302 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
5304 * configure.in: For host support, use ../bfd/configure.host
5305 so it stays in sync with the ../bfd/hosts database.
5307 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
5309 * configure.in: use cpu-vendor-os triple instead of nested cases
5311 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
5313 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
5314 *always* the wrong one.
5316 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5318 * z8kgen.c: added copyright info
5320 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5322 * z8k-dis.c (unparse_instr): prettier tabs
5323 * z8kgen.c -> z8k-opc.h: bug fixes in tables
5325 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
5327 * configure.in: Add ncr* configuration.
5328 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
5329 picayune ANSI compilers happy.
5331 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
5333 * configure.in (i386): Make i386 and i486 synonymous for now.
5334 * configure.in (i[34]86-*-sysv4): Add my_host definition.
5336 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5338 * Makefile.in (install): Fix typo.
5340 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
5342 * Makefile.in (make): Remove obsolete crud.
5343 (sparc-opc.o): Avoid Sun Make VPATH bug.
5345 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
5347 * Makefile.in: since there are no SUBDIRS, remove rule and
5348 references of subdir_do.
5350 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
5352 * Makefile.in (install): Get the library name right here too.
5353 Don't install bfd.h, since it's unrelated to this library. No
5354 subdirs to recurse into, either.
5355 (CFILES): The source file has a .c suffix, not .o.
5357 * sparc-opc.c: New file, moved from BFD.
5358 * Makefile.in (OFILES): Build it.
5360 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
5362 * z8k-dis.c: fixed forward refferences of some declarations.
5364 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
5366 * Makefile.in: get the name of the library right
5368 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
5370 * z8k-dis.c: knows how to disassemble z8k stuff
5371 * z8k-opc.h: new file full of z8000 opcodes
5375 version-control: never