1 Mon Aug 18 11:10:03 1997 Nick Clifton <nickc@cygnus.com>
3 * v850-opc.c (v850_opcodes[]): Remove use of flag field.
5 * v850-opc.c (v850_opcodes[]): Add support for reversed short load
10 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
12 * configure (cgen_files): Add support for v850e target.
13 * configure.in (cgen_files): Add support for v850e target.
17 Mon Aug 18 11:08:25 1997 Nick Clifton <nickc@cygnus.com>
19 * configure (cgen_files): Add support for v850eq target.
20 * configure.in (cgen_files): Add support for v850eq target.
23 Fri Aug 15 05:17:48 1997 Doug Evans <dje@canuck.cygnus.com>
25 * configure.in (bfd_arc_arch): Add.
27 * Makefile.am (ALL_MACHINES): Add arc-dis.lo, arc-opc.lo.
28 * Makefile.in: Rebuild.
29 * arc-dis.c, arc-opc.c: New files.
30 * disassemble.c (ARCH_all): Define ARCH_arc.
31 (disassembler): Add ARC support.
34 Wed Aug 13 18:52:11 1997 Nick Clifton <nickc@cygnus.com>
37 * .Sanitize (Do-first): Add support for keep-v850eq command line
40 * v850-dis.c (disassemble): Add support for v850EQ instructions.
42 * v850-opc.c (insert_i5div, extract_i5div): New Functions.
43 (v850_opcodes): Add v850EQ instructions.
46 * .Sanitize (Do-first): Add support for keep-v850e command line
49 * v850-dis.c (disassemble): Add support for v850E instructions.
51 * v850-opc.c (insert_d5_4, extract_d5_4, insert_d16_16,
52 extract_d16_16, insert_i9, extract_i9, insert_u9, extract_u9,
53 insert_spe, extract_spe): New Functions.
54 (v850_opcodes): Add v850E instructions.
57 * v850-opc.c: Reorganised and re-layed out to improve readability
62 Tue Aug 5 23:09:31 1997 Ian Lance Taylor <ian@cygnus.com>
64 * configure: Rebuild with autoconf 2.12.1.
66 Mon Aug 4 12:02:16 1997 Ian Lance Taylor <ian@cygnus.com>
68 * aclocal.m4, configure: Rebuild with new automake patches.
70 Fri Aug 1 13:02:04 1997 Ian Lance Taylor <ian@cygnus.com>
72 * configure.in: Set enable_shared before AM_PROG_LIBTOOL.
73 * acinclude.m4: Just include acinclude.m4 from BFD.
74 * aclocal.m4, configure: Rebuild.
76 Thu Jul 31 21:44:42 1997 Ian Lance Taylor <ian@cygnus.com>
78 * Makefile.am: New file, based on old Makefile.in.
79 * acconfig.h: New file.
80 * acinclude.m4: New file.
81 * stamp-h.in: New file.
82 * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL.
83 Removed shared library handling; now handled by libtool. Replace
84 AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AM_MAINTAINER_MODE,
85 AM_CYGWIN32, and AM_EXEEXT. Replace AC_PROG_INSTALL with
86 AM_PROG_INSTALL. Change all .o files to .lo. Remove stamp-h
87 handling in AC_OUTPUT.
88 * dep-in.sed: Change .o to .lo.
89 * Makefile.in: Now built with automake.
90 * aclocal.m4: Now built with aclocal.
91 * config.in, configure: Rebuild.
93 Mon Jul 28 21:52:24 1997 Jeffrey A Law (law@cygnus.com)
95 * mips-opc.c: Fix typo/thinko in "eret" instruction.
98 Mon Jul 28 22:07:14 1997 Andrew Cagney <cagney@b1.cygnus.com>
100 * mips-opc.c: Fix coding of mtsa.
103 Thu Jul 24 13:03:26 1997 Doug Evans <dje@canuck.cygnus.com>
105 * sparc-opc.c (sparc_opcodes): Fix spelling on fpaddX, fpsubX insns.
107 * sparc-dis.c (sorted_opcodes): New static local.
108 (struct opcode_hash): `opcode' is pointer to const element.
109 (build_hash): First arg is now table of sorted pointers.
110 (print_insn_sparc): Sort opcodes by sorting table of pointers.
111 (compare_opcodes): Update.
113 Tue Jul 15 12:05:23 1997 Doug Evans <dje@canuck.cygnus.com>
115 * cgen-opc.c: #include <ctype.h>.
116 (hash_keyword_name): New arg `case_sensitive_p'. Callers updated.
117 Handle case insensitive hashing.
118 (hash_keyword_value): Change type of `value' to unsigned int.
120 Thu Jul 10 12:56:10 1997 Jeffrey A Law (law@cygnus.com)
122 * mips-opc.c (mips_builtin_opcodes): If an insn uses single
123 precision FP, mark it as such. Likewise for double precision
124 FP. Mark ISA1 insns. Consolidate duplicate opcodes where
127 (mips_builtin_opcodes): Remove non-existant r5900 instructions
131 Thu Jun 26 16:20:27 1997 Jeffrey A Law (law@cygnus.com)
133 * mips-opc.c (mips_builtin_opcodes): Add "pinteh", "pexeh" and
134 "pexew" as synonyms for "pintoh", "pexoh", "pexow".
137 Wed Jun 25 15:25:57 1997 Felix Lee <flee@cirdan.cygnus.com>
139 * ppc-opc.c (extract_nsi): make unsigned expression signed before
141 (UNUSED): remove one level of parens, so MSVC doesn't choke on
142 nesting depth when all the macros are expanded.
144 Tue Jun 17 17:02:17 1997 Ian Lance Taylor <ian@cygnus.com>
146 * sparc-opc.c: The fcmp v9a instructions take an integer register
147 as a destination, not a floating point register. From Christian
148 Kuehnke <Christian.Kuehnke@arbi.Informatik.Uni-Oldenburg.DE>.
150 Mon Jun 16 14:13:18 1997 Ian Lance Taylor <ian@cygnus.com>
152 * m68k-dis.c (print_insn_arg): Print case 7.2 using %pc@()
153 syntax. From Roman Hodek
154 <rnhodek@faui22c.informatik.uni-erlangen.de>.
156 * i386-dis.c (twobyte_has_modrm): Fix pand.
158 Mon Jun 16 14:08:38 1997 Michael Taylor <mbt@mit.edu>
160 * i386-dis.c (dis386_twobyte): Fix pand and pandn.
162 Tue Jun 10 11:26:47 1997 H.J. Lu <hjl@gnu.ai.mit.edu>
164 * arm-dis.c: Add prototypes for arm_decode_shift and
167 Mon Jun 2 11:39:04 1997 Gavin Koch <gavin@cygnus.com>
169 * mips-opc.c: Add r3900 insns.
171 Tue May 27 15:55:44 1997 Ian Lance Taylor <ian@cygnus.com>
173 * sh-dis.c (print_insn_shx): Change relmask to bfd_vma. Don't
174 print delay slot instructions on the same line. When using a PC
175 relative load, add a comment with the value being loaded if it can
178 Tue May 27 11:02:08 1997 Alan Modra <alan@spri.levels.unisa.edu.au>
180 * i386-dis.c (dis386[], dis386_twobyte[]): change pushl/popl
181 to pushS/popS for segment regs and byte constant so that
182 pushw/popw printed when in 16 bit data mode.
184 * i386-dis.c (dis386[]): change cwtl, cltd to cWtS, cStd to
185 print cbtw, cwtd in 16 bit data mode.
186 * i386-dis.c (putop): extra case W to support above.
188 * i386-dis.c (print_insn_x86): print addr32 prefix when given
189 address size prefix in 16 bit address mode.
191 Fri May 23 16:47:23 1997 Ian Lance Taylor <ian@cygnus.com>
193 * sh-dis.c: Reindent. Rename local variable fprintf to
196 Thu May 22 14:06:02 1997 Doug Evans <dje@canuck.cygnus.com>
198 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Undo patch of May 2.
200 Tue May 20 11:26:27 1997 Gavin Koch <gavin@cygnus.com>
202 * mips-opc.c (mips_builtin_opcodes): Moved INSN_ISA field into new
204 * mips16-opc.c (mip16_opcodes): same.
206 Mon May 12 15:10:53 1997 Jim Wilson <wilson@cygnus.com>
208 * m68k-opc.c (moveb): Change $d to %d.
210 Mon May 5 14:28:41 1997 Ian Lance Taylor <ian@cygnus.com>
212 * i386-dis.c: (dis386_twobyte): Add MMX instructions.
213 (twobyte_has_modrm): Likewise.
215 (OP_MMX, OP_EM, OP_MS): New static functions.
217 * i386-dis.c: Revert patch of April 4. The output now matches
220 Fri May 2 12:48:37 1997 Doug Evans <dje@canuck.cygnus.com>
222 * m32r-opc.c (m32r_cgen_insn_table, cmpui): Use $uimm16 instead
225 Thu May 1 15:34:15 1997 Doug Evans <dje@canuck.cygnus.com>
227 * m32r-opc.h (CGEN_ARCH): Renamed from CGEN_CPU.
229 Tue Apr 15 12:40:08 1997 Ian Lance Taylor <ian@cygnus.com>
231 * Makefile.in (install): Depend upon installdirs.
232 (installdirs): New target.
234 Mon Apr 14 12:13:51 1997 Ian Lance Taylor <ian@cygnus.com>
236 From Thomas Graichen <graichen@rzpd.de>:
237 * configure.in: Use ${CONFIG_SHELL} when running $ac_config_sub.
238 * configure: Rebuild.
240 Sun Apr 13 17:50:41 1997 Doug Evans <dje@canuck.cygnus.com>
242 * cgen-*.c, m32r-*.c: #include sysdep.h instead of config.h.
243 Delete string{,s}.h support.
245 Thu Apr 10 14:44:56 1997 Doug Evans <dje@canuck.cygnus.com>
247 * cgen-asm.c (cgen_parse_operand_fn): New global.
248 (cgen_parse_{{,un}signed_integer,address}): Update call to
249 cgen_parse_operand_fn.
250 (cgen_init_parse_operand): New function.
251 * m32r-asm.c (parse_insn_normal): cgen_init_parse_operand renamed
252 from cgen_asm_init_parse.
253 (m32r_cgen_assemble_insn): New operand `errmsg'.
254 Delete call to as_bad, return error message to caller.
255 (m32r_cgen_asm_hash_keywords): #if 0 out.
257 Wed Apr 9 12:05:25 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
259 * m68k-dis.c (print_insn_arg) [case 'd']: Print as address register,
261 [case 'J']: Fix typo in register name.
263 Mon Apr 7 16:48:22 1997 Ian Lance Taylor <ian@cygnus.com>
265 * configure.in: Substitute SHLIB_LIBS.
266 * configure: Rebuild.
267 * Makefile.in (SHLIB_LIBS): New variable.
268 ($(SHLIB)): Use $(SHLIB_LIBS).
270 Mon Apr 7 11:45:44 1997 Doug Evans <dje@canuck.cygnus.com>
272 * cgen-dis.c (build_dis_hash_table): Fix xmalloc size computation.
274 * cgen-opc.c (hash_keyword_name): Improve algorithm.
276 * disassemble.c (disassembler): Handle m32r.
278 Fri Apr 4 12:29:38 1997 Doug Evans <dje@canuck.cygnus.com>
280 * m32r-asm.c, m32r-dis.c, m32r-opc.c, m32r-opc.h: New files.
281 * cgen-asm.c, cgen-dis.c, cgen-opc.c: New files.
282 * Makefile.in (CFILES): Add them.
283 (ALL_MACHINES): Add them.
284 (dependencies): Regenerate.
285 * configure.in (cgen_files): New variable.
286 (bfd_m32r_arch): Add entry.
287 * configure: Regenerate.
289 Fri Apr 4 14:04:16 1997 Ian Lance Taylor <ian@cygnus.com>
291 * configure.in: Correct file names for bfd_mn10[23]00_arch.
292 * configure: Rebuild.
294 * Makefile.in: Rebuild dependencies.
296 * d10v-dis.c: Include "ansidecl.h" before "opcode/d10v.h".
298 * i386-dis.c (float_reg): Swap fsubrp and fsubp. Swap fdivrp and
301 Thu Apr 3 13:22:45 1997 Ian Lance Taylor <ian@cygnus.com>
303 * Branched binutils 2.8.
305 Wed Apr 2 12:23:53 1997 Ian Lance Taylor <ian@cygnus.com>
307 * m10200-dis.c: Rename from mn10200-dis.c.
308 * m10200-opc.c: Rename from mn10200-opc.c.
309 * m10300-dis.c: Rename from mn10300-dis.c
310 * m10300-opc.c: Rename from mn10300-opc.c.
311 * Makefile.in: Update accordingly.
313 * mips16-opc.c: Add mul and dmul macros.
315 Tue Apr 1 16:27:45 1997 Klaus Kaempf <kkaempf@progis.de>
317 * makefile.vms: Update CFLAGS, add clean target.
319 Fri Mar 28 12:10:09 1997 Ian Lance Taylor <ian@cygnus.com>
321 * mips-opc.c: Add "wait". From Ralf Baechle
322 <ralf@gnu.ai.mit.edu>.
324 * configure.in: Add stdlib.h to AC_CHECK_HEADERS list.
325 * configure, config.in: Rebuild.
326 * sysdep.h: Include <stdlib.h> if it exists.
327 * sparc-dis.c: Include <stdio.h> and "sysdep.h". Don't include
329 * Makefile.in: Rebuild dependencies.
331 Thu Mar 27 14:24:43 1997 Ian Lance Taylor <ian@cygnus.com>
333 * ppc-opc.c: Add PPC 403 instructions and extended opcodes. From
334 Andrew Bray <andy@madhouse.demon.co.uk>.
336 * mips-opc.c: Add cast when setting mips_opcodes.
339 Tue Mar 25 23:04:00 1997 Stu Grossman (grossman@critters.cygnus.com)
341 * v850-dis.c (disassemble): Fix sign extension problem.
342 * v850-opc.c (extract_d*): Fix sign extension problems to make
343 disassembly calculate branch offsets correctly.
346 Mon Mar 24 13:22:13 1997 Ian Lance Taylor <ian@cygnus.com>
348 * sh-opc.h: Add bf/s and bt/s as synonyms for bf.s and bt.s.
350 * mips-opc.c: Add dctr and dctw.
353 Sun Mar 23 18:08:10 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
355 * d30v-dis.c (print_insn): Change the way signed constants
358 Fri Mar 21 14:37:52 1997 Ian Lance Taylor <ian@cygnus.com>
360 * Makefile.in (BFD_H): New variable.
361 (HFILES): New variable.
362 (CFILES): Add all C files.
363 (.dep, .dep1, dep.sed, dep, dep-in): New targets.
364 Delete old dependencies, and build new ones.
365 * dep-in.sed: New file.
367 Thu Mar 20 19:03:30 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
369 * m68k-opc.c (m68k_opcode_aliases): Added blo and blo{s,b,w,l}.
371 start-sanitize-coldfire
372 Wed Mar 19 06:53:58 1997 J.T. Conklin <jtc@rtl.cygnus.com>
374 * m68k-opc.c (m68k_opcodes): Provide coldfire division module
377 end-sanitize-coldfire
378 Tue Mar 18 14:17:03 1997 Jeffrey A Law (law@cygnus.com)
380 * mn10200-opc.c: Change "trap" to "syscall".
381 * mn10300-opc.c: Add new "syscall" instruction.
383 Mon Mar 17 08:48:03 1997 J.T. Conklin <jtc@beauty.cygnus.com>
385 * m68k-opc.c (m68k_opcodes): Provide correct entries for mulsl and
386 mulul insns on the coldfire.
388 Sat Mar 15 17:13:05 1997 Ian Lance Taylor <ian@cygnus.com>
390 * arm-dis.c (print_insn_arm): Don't print instruction bytes.
391 (print_insn_big_arm): Set bytes_per_chunk and display_endian.
392 (print_insn_little_arm): Likewise.
394 Fri Mar 14 15:08:59 1997 Ian Lance Taylor <ian@cygnus.com>
396 Based on patches from H.J. Lu <hjl@lucon.org>:
397 * i386-dis.c (fetch_data): Add prototype.
398 * m68k-dis.c (fetch_data): Add prototype.
399 (dummy_print_address): Add prototype. Make static.
400 * ppc-opc.c (valid_bo): Add prototype.
401 * sparc-dis.c (build_hash_table): Add prototype.
402 (is_delayed_branch, compute_arch_mask): Add prototypes.
403 (print_insn_sparc): Make several local variables const.
404 (compare_opcodes): Change arguments to const PTR. Add prototype.
405 * sparc-opc.c (arg): Change name field to be const.
406 (lookup_name, lookup_value): Add prototypes. Change table and
407 name parameters to be const.
408 (sparc_encode_asi): Change name parameter to be const.
409 (sparc_encode_membar, sparc_encode_prefetch): Likewise.
410 (sparc_encode_sparclet_cpreg): Likewise.
411 (sparc_decode_asi): Change return type to be const.
412 (sparc_decode_membar, sparc_decode_prefetch): Likewise.
413 (sparc_decode_sparclet_cpreg): Likewise.
415 Fri Mar 7 10:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
417 * Makefile.in ($(SHLINK)): Just use ln -s, not ln -sf, since
418 Solaris doesn't like the combined options, and the -f is
420 (stamp-tshlink, install): Likewise.
422 Thu Mar 6 16:51:11 1997 Jeffrey A Law (law@cygnus.com)
424 * mn10300-opc.c (IMM16_PCREL, SD8N_PCREL, D16_SHIFT): Mark these
427 Tue Mar 4 06:10:36 1997 J.T. Conklin <jtc@cygnus.com>
429 * m68k-opc.c (m68k_opcodes): Fix last change for the mc68010.
431 Mon Mar 3 07:45:20 1997 J.T. Conklin <jtc@cygnus.com>
433 * m68k-opc.c (m68k_opcodes): Added entries for the tst insns on
436 Thu Feb 27 14:04:32 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
438 * m68k-opc.c (m68k_opcodes): Added swbegl pseudo-instruction.
441 Thu Feb 27 11:36:41 1997 Michael Meissner <meissner@cygnus.com>
443 * tic80-dis.c (print_insn_tic80): Set info->bytes_per_line to 8.
445 Wed Feb 26 15:34:48 1997 Michael Meissner <meissner@cygnus.com>
447 * tic80-opc.c (tic80_predefined_symbols): Define r25 properly.
450 Wed Feb 26 13:38:30 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
452 * m68k-dis.c (NEXTSINGLE, NEXTDOUBLE, NEXTEXTEND): Use
453 floatformat_to_double to make portable.
454 (print_insn_arg): Use NEXTEXTEND macro when extracting extended
457 Mon Feb 24 19:26:12 1997 Dawn Perchik <dawn@cygnus.com>
459 * mips-opc.c: Initialize mips_opcodes to mips_builtin_opcodes,
460 and bfd_mips_num_opcodes to bfd_mips_num_builtin_opcodes.
462 Mon Feb 24 15:19:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
464 * d10v-dis.c, d10v-opc.c: Change pre_defined_registers to
465 d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.
468 Mon Feb 24 14:33:26 1997 Fred Fish <fnf@cygnus.com>
470 * tic80-opc.c (LSI_SCALED): Renamed from this ...
471 (OFF_SL_BR_SCALED): ... to this, and added the flag
472 TIC80_OPERAND_BASEREL to the flags word.
473 (tic80_opcodes): Replace all occurances of LSI_SCALED with
477 Sat Feb 22 21:25:00 1997 Dawn Perchik <dawn@cygnus.com>
479 * mips-opc.c: Add macros for cop0, cop1 cop2 and cop3.
480 Change mips_opcodes from const array to a pointer,
481 and change bfd_mips_num_opcodes from const int to int,
482 so that we can increase the size of the mips opcodes table
486 Sat Feb 22 21:03:47 1997 Fred Fish <fnf@cygnus.com>
488 * tic80-opc.c (tic80_predefined_symbols): Revert change to
489 store BITNUM values in the table in one's complement form
490 to match behavior when assembler is given a raw numeric
491 value for a BITNUM operand.
492 * tic80-dis.c (print_operand_bitnum): Ditto.
496 Fri Feb 21 16:31:18 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
498 * d30v-opc.c: Removed references to FLAG_X.
501 Wed Feb 19 14:51:20 1997 Ian Lance Taylor <ian@cygnus.com>
503 * Makefile.in: Add dependencies on ../bfd/bfd.h as required.
506 Tue Feb 18 17:43:43 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
508 * Makefile.in: Added d30v object files.
509 * configure: (bfd_d30v_arch) Rebuilt.
510 * configure.in: (bfd_d30v_arch) Added new case.
511 * d30v-dis.c: New file.
512 * d30v-opc.c: New file.
513 * disassemble.c (disassembler) Add entry for d30v.
517 Tue Feb 18 16:32:08 1997 Fred Fish <fnf@cygnus.com>
519 * tic80-opc.c (tic80_predefined_symbols): Add symbolic
520 representations for the floating point BITNUM values.
522 Fri Feb 14 12:14:05 1997 Fred Fish <fnf@cygnus.com>
524 * tic80-opc.c (tic80_predefined_symbols): Store BITNUM values
525 in the table in one's complement form, as they appear in the
527 (tic80_symbol_to_value): Use macros to access predefined
529 (tic80_value_to_symbol): Ditto.
530 (tic80_next_predefined_symbol): New function.
531 * tic80-dis.c (print_operand_bitnum): Remove code that did
532 one's complement for BITNUM values.
536 Fri Feb 14 13:56:51 1997 Gavin Koch <gavin@cygnus.com>
538 * mips-opc.c: bug fix, can't mark insns INSN_5900 and INSN_ISA4
541 Thu Feb 13 21:56:51 1997 Klaus Kaempf <kkaempf@progis.de>
543 * makefile.vms: Remove 8 bit characters. Update to latest
546 Thu Feb 13 20:41:22 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
548 * m68k-opc.c (m68k_opcodes): Add swbeg pseudo-instruction.
550 Thu Feb 13 16:30:02 1997 Jeffrey A Law (law@cygnus.com)
552 * mn10200-opc.c (IMM16_PCREL): This is a signed operand.
553 (IMM24_PCREL): Likewise.
555 Thu Feb 13 13:28:43 1997 Ian Lance Taylor <ian@cygnus.com>
557 * mips-dis.c (print_mips16_insn_arg): Use memaddr - 2 as the base
558 address for an extended PC relative instruction that is not a
561 Wed Feb 12 12:27:40 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
563 * m68k-dis.c (print_insn_m68k): Set bytes_per_chunk and
567 Tue Feb 11 16:36:31 1997 Fred Fish <fnf@cygnus.com>
569 * tic80-opc.c (tic80_operands): Fix typo '+' -> '|'.
570 (tic80_opcodes): Sort entries so that long immediate forms
571 come after short immediate forms, making it easier for
572 assembler to select the right one for a given operand.
575 Tue Feb 11 15:26:47 1997 Ian Lance Taylor <ian@cygnus.com>
577 * mips-dis.c (_print_insn_mips): Set bytes_per_chunk and
579 (print_insn_mips16): Likewise.
582 Fri Feb 7 11:12:44 1997 Gavin Koch <gavin@cygnus.com>
584 * mips-opc.c: add r5900.
588 Mon Feb 10 10:12:41 1997 Fred Fish <fnf@cygnus.com>
590 * tic80-opc.c (tic80_symbol_to_value): Changed to accept
591 a symbol class that restricts translation to just that
592 class (general register, condition code, etc).
594 Thu Feb 6 17:34:09 1997 Fred Fish <fnf@cygnus.com>
596 * tic80-opc.c (tic80_operands): Add REG_0_E, REG_22_E,
597 and REG_DEST_E for register operands that have to be
598 an even numbered register. Add REG_FPA for operands that
599 are one of the floating point accumulator registers.
600 Add TIC80_OPERAND_MASK to flags for ENDMASK operand.
601 (tic80_opcodes): Change entries that need even numbered
602 register operands to use the new operand table entries.
603 Add "or" entries that are identical to "or.tt" entries.
606 Wed Feb 5 11:12:44 1997 Ian Lance Taylor <ian@cygnus.com>
608 * mips16-opc.c: Add new cases of exit instruction for
610 * mips-dis.c (print_mips16_insn_arg): Display floating point
611 registers in operands of exit instruction. Print `$' before
612 register names in operands of entry and exit instructions.
615 Thu Jan 30 14:09:03 1997 Fred Fish <fnf@cygnus.com>
617 * tic80-opc.c (tic80_predefined_symbols): Table of name/value
618 pairs for all predefined symbols recognized by the assembler.
619 Also used by the disassembling routines.
620 (tic80_symbol_to_value): New function.
621 (tic80_value_to_symbol): New function.
622 * tic80-dis.c (print_operand_control_register,
623 print_operand_condition_code, print_operand_bitnum):
624 Remove private tables and use tic80_value_to_symbol function.
627 Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
629 * d10v-dis.c (print_operand): Change address printing
630 to correctly handle PC wrapping. Fixes PR11490.
632 Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
634 * mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
637 Tue Jan 28 15:57:34 1997 Ian Lance Taylor <ian@cygnus.com>
639 * mips-dis.c (print_insn_mips16): Set insn_info information.
640 (print_mips16_insn_arg): Likewise.
642 * mips-dis.c (print_insn_mips16): Better handling of an extend
643 opcode followed by an instruction which can not be extended.
645 Fri Jan 24 12:08:21 1997 J.T. Conklin <jtc@cygnus.com>
647 * m68k-opc.c (m68k_opcodes): Changed operand specifier for the
648 coldfire moveb instruction to not allow an address register as
649 destination. Although the documentation does not indicate that
650 this is invalid, experiments uncovered unexpected behavior.
651 Added a comment explaining the situation. Thanks to Andreas
652 Schwab for pointing this out to me.
655 Wed Jan 22 20:13:51 1997 Fred Fish <fnf@cygnus.com>
657 * tic80-opc.c (tic80_opcodes): Expand comment to note that the
658 entries are presorted so that entries with the same mnemonic are
659 adjacent to each other in the table. Sort the entries for each
660 instruction so that this is true.
663 Mon Jan 20 12:48:57 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
665 * m68k-dis.c: Include <libiberty.h>.
666 (print_insn_m68k): Sort the opcode table on the most significant
667 nibble of the opcode.
670 Sat Jan 18 15:15:05 1997 Fred Fish <fnf@cygnus.com>
672 * tic80-dis.c (tic80_opcodes): Add "wrcr", "vmpy", "vrnd",
673 "vsub", "vst", "xnor", and "xor" instructions.
674 (V_a1): Renamed from V_a, msb of accumulator reg number.
675 (V_a0): Add macro, lsb of accumulator reg number.
677 Fri Jan 17 18:24:31 1997 Fred Fish <fnf@cygnus.com>
679 * tic80-dis.c (print_insn_tic80): Broke excessively long
680 function up into several smaller ones and arranged for
681 the instruction printing function to be callable recursively
682 to print vector instructions that have both a load and a
683 math instruction packed into a single opcode.
684 * tic80-opc.c (tic80_opcodes): Expand comment for vld opcode
685 to explain why it comes after the other vector opcodes.
688 Fri Jan 17 16:19:15 1997 J.T. Conklin <jtc@beauty.cygnus.com>
690 * m68k-opc.c (m68k_opcodes): add b, w, or l specifier to coldfire
691 move insns to handle immediate operands.
693 Thu Jan 17 16:19:00 1997 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
695 * m68k-opc.c (m68k_opcodes): Delete duplicate entry for "cmpil".
696 fix operand mask in the "moveml" entries for the coldfire.
699 Thu Jan 16 20:54:40 1997 Fred Fish <fnf@cygnus.com>
701 * tic80-opc.c (V_a, V_m, V_S, V_Z, V_p, OP_V, MASK_V):
702 New macros for building vector instruction opcodes.
703 (tic80_opcodes): Remove all uses of FMT_SI, FMT_REG, and
704 FMT_LI, which were unused. The field is now a flags field.
705 Remove some opcodes that are possible, but illegal, such
706 as long immediate instructions with doubles for immediate
707 values. Add "vadd" and "vld" instructions.
709 Wed Jan 15 18:59:51 1997 Fred Fish <fnf@cygnus.com>
711 * tic80-opc.c (tic80_operands): Reorder some table entries to make
712 the order more logical. Move the shift alias instructions ("rotl",
713 "shl", "ins", "rotr", "extu", "exts", "srl", and "sra" to be
714 interspersed with the regular sr.x and sl.x instructions. Add
715 and test new instruction opcodes for "sl", "sli", "sr", "sri", "st",
716 "sub", "subu", "swcr", and "trap".
718 Tue Jan 14 19:42:50 1997 Fred Fish <fnf@cygnus.com>
720 * tic80-opc.c (OFF_SS_PC): Renamed from OFF_SS.
721 (OFF_SL_PC): Renamed from OFF_SL.
722 (OFF_SS_BR): New operand type for base relative operand.
723 (OFF_SL_BR): New operand type for base relative operand.
724 (REG_BASE): New operand type for base register operand.
725 (tic80_opcodes): Add and test "fmpy", "frndm", "frndn", "frndp",
726 "frndz", "fsqrt", "fsub", "illop0", "illopF", "ins", "jsr",
727 "ld", "ld.u", "lmo", "or", "rdcr", "rmo", "rotl", and "rotr"
729 * tic80-dis.c (print_insn_tic80): Print opcode name with fixed width
730 10 char field, padded with spaces on rhs, rather than a string
731 followed by a tab. Use renamed TIC80_OPERAND_PCREL flag bit rather
732 than old TIC80_OPERAND_RELATIVE. Add support for new
733 TIC80_OPERAND_BASEREL flag bit.
735 Mon Jan 13 15:58:56 1997 Fred Fish <fnf@cygnus.com>
737 * tic80-dis.c (print_insn_tic80): Print floating point operands
739 * tic80-opc.c (SPFI): Add single precision floating point
740 immediate operand type.
741 (ROTATE): Add rotate operand type for shifts.
742 (ENDMASK): Add for shifts.
743 (n): Macro for the 'n' bit.
744 (i): Macro for the 'i' bit.
745 (PD): Macro for the 'PD' field.
746 (P2): Macro for the 'P2' field.
747 (P1): Macro for the 'P1' field.
748 (tic80_opcodes): Add entries for "exts", "extu", "fadd",
752 Mon Jan 6 15:06:55 1997 Jeffrey A Law (law@cygnus.com)
754 * mn10200-dis.c (disassemble): Mask off unwanted bits after
755 adding in current address for pc-relative operands.
758 Mon Jan 6 10:56:25 1997 Fred Fish <fnf@cygnus.com>
760 * tic80-dis.c (R_SCALED): Add macro to test for ":s" modifier bit.
761 (print_insn_tic80): If R_SCALED then print ":s" modifier for operand.
762 * tic80-opc.c (REG0, REG22, REG27, SSOFF, LSOFF): Names
763 changed to REG_0, REG_22, REG_DEST, OFF_SS, OFF_SL respectively.
764 (SICR, LICR, REGM_SI, REGM_LI): Names changed to CR_SI, CR_LI,
765 REG_BASE_M_SI, REG_BASE_M_LI respectively.
766 (REG_SCALED, LSI_SCALED): New operand types.
767 (E): New macro for 'E' bit at bit 27.
768 (tic80_opcodes): Add and test dld, dld.u, dst, estop, and etrap
769 opcodes, including the various size flavors (b,h,w,d) for
770 the direct load and store instructions.
772 Sun Jan 5 12:18:14 1997 Fred Fish <fnf@cygnus.com>
774 * tic80-dis.c (M_SI, M_LI): Add macros to test for ":m" modifier bit
776 * tic80-dis.c (print_insn_tic80): Change comma and paren handling.
777 Use M_SI and M_LI macros to check for ":m" modifier for GPR operands.
778 * tic80-opc.c (tic80_operands): Add REGM_SI and REGM_LI operands.
779 (F, M_REG, M_LI, M_SI, SZ_REG, SZ_LI, SZ_SI, D, S): New bit-twiddlers.
780 (MASK_LI_M, MASK_SI_M, MASK_REG_M): Remove and replace in opcode
781 masks with "MASK_* & ~M_*" to get the M bit reset.
782 (tic80_opcodes): Add bsr, bsr.a, cmnd, cmp, dcachec, and dcachef.
784 Sat Jan 4 19:05:05 1997 Fred Fish <fnf@cygnus.com>
786 * tic80-dis.c (print_insn_tic80): Print TIC80_OPERAND_RELATIVE
787 correctly. Add support for printing TIC80_OPERAND_BITNUM and
788 TIC80_OPERAND_CC, and TIC80_OPERAND_CR operands in symbolic
790 * tic80-opc.c (tic80_operands): Add SSOFF, LSOFF, BITNUM,
791 CC, SICR, and LICR table entries.
792 (tic80_opcodes): Add and test "nop", "br", "bbo", "bbz",
793 "bcnd", and "brcr" opcodes.
796 Fri Jan 3 18:32:11 1997 Fred Fish <fnf@cygnus.com>
798 * ppc-opc.c (powerpc_operands): Make comment match the
799 actual fields (no shift field).
800 * sparc-opc.c (sparc_opcodes): Document why this cannot be "const".
802 * tic80-dis.c (print_insn_tic80): Replace abort stub with a
803 partial implementation, work in progress.
804 * tic80-opc.c (tic80_operands): Begin construction operands table.
805 (tic80_opcodes): Continue populating opcodes table and start
806 filling in the operand indices.
807 (tic80_num_opcodes): Add this.
810 Fri Jan 3 12:13:52 1997 Ian Lance Taylor <ian@cygnus.com>
812 * m68k-opc.c: Add #B case for moveq.
814 Thu Jan 2 12:14:29 1997 Jeffrey A Law (law@cygnus.com)
816 * mn10300-dis.c (disassemble): Make sure all variables are initialized
817 before they are used.
820 Tue Dec 31 12:20:38 1996 Jeffrey A Law (law@cygnus.com)
822 * v850-opc.c (v850_opcodes): Put curly-braces around operands
823 for "breakpoint" instruction.
826 Tue Dec 31 15:38:13 1996 Ian Lance Taylor <ian@cygnus.com>
828 * Makefile.in (ALL_CFLAGS): Add -D_GNU_SOURCE.
829 (dep): Use ALL_CFLAGS rather than CFLAGS.
832 Tue Dec 31 15:09:16 1996 Michael Meissner <meissner@tiktok.cygnus.com>
834 * v850-opc.c (D8_{6,7}): Set V850_OPERAND_ADJUST_SHORT_MEMORY
838 Mon Dec 30 17:02:11 1996 Fred Fish <fnf@cygnus.com>
840 * Makefile.in (m68k-opc.o, alpha-opc.o): Remove dis-asm.h dependency.
842 (tic80-dis.o, tic80-opc.o): Add rules per comment in Makefile.in.
845 Mon Dec 30 11:38:01 1996 Ian Lance Taylor <ian@cygnus.com>
847 * mips16-opc.c: Add "abs".
850 Sun Dec 29 10:58:22 1996 Fred Fish <fnf@cygnus.com>
852 * Makefile.in (ALL_MACHINES): Add tic80-dis.o and tic80-opc.o.
853 * disassemble.c (ARCH_tic80): Define if ARCH_all is defined.
854 (disassembler): Add bfd_arch_tic80 support to set disassemble
856 * tic80-dis.c (print_insn_tic80): Add stub.
858 Fri Dec 27 22:30:57 1996 Fred Fish <fnf@cygnus.com>
860 * configure.in (arch in $selarchs): Add bfd_tic80_arch entry.
861 * configure: Regenerate with autoconf.
862 * tic80-dis.c: Add file.
863 * tic80-opc.c: Add file.
866 Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
868 * d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
870 Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
872 * mn10200-opc.c (mn10200_operands): Add SIMM16N.
873 (mn10200_opcodes): Use it for some logicals and btst insns.
874 Add "break" and "trap" instructions.
876 * mn10300-opc.c (mn10300_opcodes): Add "break" instruction.
878 * mn10200-opc.c: Add pseudo-ops for "mov (an),am" and "mov an,(am)".
880 Sat Dec 14 22:36:20 1996 Ian Lance Taylor <ian@cygnus.com>
882 * mips-dis.c (print_mips16_insn_arg): The base address of a PC
883 relative load or add now depends upon whether the instruction is
886 Wed Dec 11 09:23:46 1996 Jeffrey A Law (law@cygnus.com)
888 * mn10200-dis.c: Finish writing disassembler.
889 * mn10200-opc.c (mn10200_opcodes): Fix mask for "mov imm8,dn".
890 Fix mask for "jmp (an)".
892 * mn10300-dis.c (disassemble, print_insn_mn10300): Corrently
893 handle endianness issues for mn10300.
895 * mn10200-opc.c (mn10200_opcodes): Fix operands for "movb dm,(an)".
897 Tue Dec 10 12:08:05 1996 Jeffrey A Law (law@cygnus.com)
899 * mn10200-opc.c (mn10200_opcodes): "mov imm8,d0" is a format 2
900 instruction. Fix opcode field for "movb (imm24),dn".
902 * mn10200-opc.c (mn10200_operands): Fix insertion position
905 Mon Dec 9 16:42:43 1996 Jeffrey A Law (law@cygnus.com)
907 * mn10200-opc.c: Create mn10200 opcode table.
908 * mn10200-dis.c: Flesh out mn10200 disassembler. Not ready,
909 but moving along nicely.
911 Sun Dec 8 04:28:31 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
913 * Makefile.in (ALL_MACHINES): Add mips16-opc.o.
915 Fri Dec 6 16:47:40 1996 J.T. Conklin <jtc@rhino.cygnus.com>
917 * m68k-opc.c (m68k_opcodes): Revert change to use < and >
918 specifiers for fmovem* instructions.
920 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
922 * mn10300-dis.c (disassemble): Remove '$' register prefixing.
924 Fri Dec 6 17:34:39 1996 Ian Lance Taylor <ian@cygnus.com>
926 * mips16-opc.c: Change opcode for entry/exit to avoid conflicting
929 Fri Dec 6 14:48:09 1996 Jeffrey A Law (law@cygnus.com)
931 * mn10300-opc.c: Add some comments explaining the various
934 * mn10300-dis.c (disassemble): Fix minor gcc -Wall warnings.
936 Thu Dec 5 12:09:48 1996 J.T. Conklin <jtc@rtl.cygnus.com>
938 * m68k-dis.c (print_insn_arg): Handle new < and > operand
941 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
942 operand specifiers in fmovm* instructions.
944 Wed Dec 4 14:52:18 1996 Ian Lance Taylor <ian@cygnus.com>
946 * ppc-opc.c (insert_li): Give an error if the offset has the two
947 least significant bits set.
949 Wed Nov 27 13:09:01 1996 Ian Lance Taylor <ian@cygnus.com>
951 * mips-dis.c (print_insn_mips16): Separate the instruction from
952 the arguments with a tab, not a space.
954 Tue Nov 26 13:24:17 1996 Jeffrey A Law (law@cygnus.com)
956 * mn10300-dis.c (disasemble): Finish conversion to '$' as
959 * mn10300-opc.c (mn10300_opcodes): Fix mask field for
962 Tue Nov 26 10:53:21 1996 Ian Lance Taylor <ian@cygnus.com>
964 * configure: Rebuild with autoconf 2.12.
966 Add support for mips16 (16 bit MIPS implementation):
967 * mips16-opc.c: New file.
968 * mips-dis.c: Include "elf-bfd.h" and "elf/mips.h".
969 (mips16_reg_names): New static array.
970 (print_insn_big_mips): Use print_insn_mips16 in 16 bit mode or
971 after seeing a 16 bit symbol.
972 (print_insn_little_mips): Likewise.
973 (print_insn_mips16): New static function.
974 (print_mips16_insn_arg): New static function.
975 * mips-opc.c: Add jalx instruction.
976 * Makefile.in (mips16-opc.o): New target.
977 * configure.in: Use mips16-opc.o for bfd_mips_arch.
978 * configure: Rebuild.
980 Mon Nov 25 16:15:17 1996 J.T. Conklin <jtc@cygnus.com>
982 * m68k-opc.c (m68k_opcodes): Simplify table by using < and >
983 operand specifiers in *save, *restore and movem* instructions.
985 * m68k-opc.c (m68k_opcodes): Fix move and movem instructions for
988 * m68k-opc.c (m68k_opcodes): The coldfire (mcf5200) can only use
989 register operands for immediate arithmetic, not, neg, negx, and
990 set according to condition instructions.
992 * m68k-opc.c (m68k_opcodes): Consistantly Use "s" as the storage
993 specifier of the effective-address operand in immediate forms of
994 arithmetic instructions. The specifier for the immediate operand
995 notes how and where the constant will be stored.
997 Mon Nov 25 11:17:01 1996 Jeffrey A Law (law@cygnus.com)
999 * mn10300-opc.c (mn10300_opcodes): Remove redundant "lcc"
1002 * mn10300-dis.c (disassemble): Use '$' instead of '%' for
1005 * mn10300-dis.c (disassemble): Prefix registers with '%'.
1007 Wed Nov 20 10:37:13 1996 Jeffrey A Law (law@cygnus.com)
1009 * mn10300-dis.c (disassemble): Handle register lists.
1011 * mn10300-opc.c: Fix handling of register list operand for
1012 "call", "ret", and "rets" instructions.
1014 * mn10300-dis.c (disassemble): Print PC-relative and memory
1015 addresses symbolically if possible.
1016 * mn10300-opc.c: Distinguish between absolute memory addresses,
1017 pc-relative offsets & random immediates.
1019 * mn10300-dis.c (print_insn_mn10300): Fix fetch of last byte
1021 (disassemble): Handle SPLIT and EXTENDED operands.
1023 Tue Nov 19 13:33:01 1996 Jeffrey A Law (law@cygnus.com)
1025 * mn10300-dis.c: Rough cut at printing some operands.
1027 * mn10300-dis.c: Start working on disassembler support.
1028 * mn10300-opc.c (mn10300_opcodes): Fix masks on several insns.
1030 * mn10300-opc.c (mn10300_operands): Add "REGS" for a register
1032 (mn10300_opcodes): Use REGS for register list in "movm" instructions.
1034 Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1036 * d10v-opc.c (d10v_opcodes): Add3 sets the carry.
1038 Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
1040 * mn10300-opc.c (mn10300_opcodes): Demand parens around
1041 register argument is calls and jmp instructions.
1043 Thu Nov 7 00:26:05 1996 Jeffrey A Law (law@cygnus.com)
1045 * mn10300-opc.c (mn10300_opcodes): Use DN01 for putx and
1046 getx operand. Fix opcode for mulqu imm,dn.
1048 Wed Nov 6 13:42:32 1996 Jeffrey A Law (law@cygnus.com)
1050 * mn10300-opc.c (mn10300_operands): Hijack "bits" field
1051 in MN10300_OPERAND_SPLIT operands for how many bits
1052 appear in the basic insn word. Add IMM32_HIGH24,
1053 IMM32_HIGH24_LOWSHIFT8, IMM8E_SHIFT8.
1054 (mn10300_opcodes): Use new operands as needed.
1056 * mn10300-opc.c (mn10300_operands): Add IMM32_LOWSHIFT8
1057 for bset, bclr, btst instructions.
1058 (mn10300_opcodes): Use new IMM32_LOWSHIFT8 as needed.
1060 * mn10300-opc.c (mn10300_operands): Remove many redundant
1061 operands. Update opcode table as appropriate.
1062 (IMM32): Add MN10300_OPERAND_SPLIT flag.
1063 (mn10300_opcodes): Fix single bit error in mov imm32,dn insn.
1065 Tue Nov 5 13:26:58 1996 Jeffrey A Law (law@cygnus.com)
1067 * mn10300-opc.c (mn10300_operands): Add DN2, DM2, AN2, AM2
1068 operands (for indexed load/stores). Fix bitpos for DI
1069 operand. Add SN8N_SHIFT8, IMM8_SHIFT8, and D16_SHIFT for the
1070 few instructions that insert immediates/displacements in the
1071 middle of the instruction. Add IMM8E for 8 bit immediate in
1072 the extended part of an instruction.
1073 (mn10300_operands): Use new opcodes as appropriate.
1075 Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1077 * d10v-opc.c (d10v_opcodes): Declare the trap instruction
1078 sequential so the assembler never parallelizes it with
1081 Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
1083 * mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
1084 a data/address register that appears in register field 0
1085 and register field 1.
1086 (mn10300_opcodes): Use DN01 and AN01 for mov/cmp imm8,DN/AN
1088 Fri Nov 1 10:29:11 1996 Richard Henderson <rth@tamu.edu>
1090 * alpha-dis.c (print_insn_alpha): Use new NOPAL mask for
1091 standard disassembly.
1093 * alpha-opc.c (alpha_operands): Rearrange flags slot.
1094 (alpha_opcodes): Add new BWX, CIX, and MAX instructions.
1095 Recategorize PALcode instructions.
1098 Wed Oct 30 16:46:58 1996 Jeffrey A Law (law@cygnus.com)
1100 * v850-opc.c (v850_opcodes): Add relaxing "jbr".
1103 Tue Oct 29 16:30:28 1996 Ian Lance Taylor <ian@cygnus.com>
1105 * mips-dis.c (_print_insn_mips): Don't print a trailing tab if
1106 there are no operand types.
1109 Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com)
1111 * v850-opc.c (D9_RELAX): Renamed from D9, all references
1113 (v850_operands): Make sure D22 immediately follows D9_RELAX.
1116 Fri Oct 25 12:12:53 1996 Ian Lance Taylor <ian@cygnus.com>
1118 * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5.
1121 Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com)
1123 * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w
1124 and sst.w instructions.
1126 * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for
1130 Thu Oct 24 17:21:20 1996 Ian Lance Taylor <ian@cygnus.com>
1132 * mips-dis.c (_print_insn_mips): Use a tab between the instruction
1135 Tue Oct 22 23:32:56 1996 Ian Lance Taylor <ian@cygnus.com>
1137 * ppc-opc.c (PPCPWR2): Define.
1138 (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating
1141 Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com)
1143 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode
1144 field for movhu instruction.
1147 * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands,
1148 cast value to "long" not "signed long" to keep hpux10
1152 Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com)
1154 * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field
1157 * mn10300-opc.c (FMT*): Remove definitions.
1159 * mn10300-opc.c (mn10300_opcodes): Fix destination register
1160 for shift-by-register opcodes.
1162 * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM
1163 into [AD][MN][01] for encoding the position of the register
1166 Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com)
1168 * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions,
1169 "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch".
1171 Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com)
1173 * mn10300-opc.c (mn10300_operands): Remove "REGS" operand.
1174 Fix various typos. Add "PAREN" operand.
1175 (MEM, MEM2): Define.
1176 (mn10300_opcodes): Surround all memory addresses with "PAREN"
1177 operands. Fix several typos.
1179 * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's
1182 Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com)
1184 * mn10300-opc.c (FMT_XX): Renumber starting at one.
1185 (mn10300_operands): Rough cut. Enough to parse "mov" instructions
1187 (mn10300_opcodes): Break opcode format out into its own field.
1188 Update many operand fields to deal with signed vs unsigned
1189 issues. Fix one or two typos in the "mov" instruction
1190 opcode, mask and/or operand fields.
1192 Mon Oct 7 11:39:49 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1194 * m68k-opc.c (plusha): Prefer encoding for m68040up, in case
1195 m68851 wasn't reset.
1197 Thu Oct 3 17:17:02 1996 Ian Lance Taylor <ian@cygnus.com>
1199 * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for
1200 all opcodes. Very rough cut at operands for all opcodes.
1202 * mn10300-opc.c (mn10300_opcodes): Start fleshing out the
1205 Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com)
1207 * mn10200-opc.c, mn10300-opc.c: New files.
1208 * mn10200-dis.c, mn10300-dis.c: New files.
1209 * mn10x00-opc.c, mn10x00-dis.c: Deleted.
1210 * disassemble.c: Break mn10x00 support into 10200 and 10300
1212 * configure.in: Likewise.
1213 * configure: Rebuilt.
1215 Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1217 * Makefile.in (MOSTLYCLEAN): Move config.log to distclean.
1219 Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com)
1221 * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita
1223 * disassemble (ARCH_mn10x00): Define.
1224 (disassembler): Handle bfd_arch_mn10x00.
1225 * configure.in: Recognize bfd_mn10x00_arch.
1226 * configure: Rebuilt.
1228 Tue Oct 1 10:49:11 1996 Ian Lance Taylor <ian@cygnus.com>
1230 * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses
1231 accordingly. Don't declare functions using op_rtn.
1234 Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com)
1236 * v850-dis.c (disassemble): Add memaddr argument. Re-arrange
1237 params to be more standard.
1238 * (disassemble): Print absolute addresses and symbolic names for
1239 branch and jump targets.
1240 * v850-opc.c (v850_operand): Add displacement flag to 9 and 22
1242 * (v850_opcodes): Add breakpoint insn.
1245 Mon Sep 23 12:32:26 1996 Ian Lance Taylor <ian@cygnus.com>
1247 * m68k-opc.c: Move the fmovemx data register cases before the
1248 other cases, so that they get recognized before the data register
1249 does gets treated as a degenerate register list.
1251 Tue Sep 17 12:06:51 1996 Ian Lance Taylor <ian@cygnus.com>
1253 * mips-opc.c: Add a case for "div" and "divu" with two registers
1254 and a destination of $0.
1256 Tue Sep 10 16:12:39 1996 Fred Fish <fnf@rtl.cygnus.com>
1258 * mips-dis.c (print_insn_arg): Add prototype.
1259 (_print_insn_mips): Ditto.
1261 Mon Sep 9 14:26:26 1996 Ian Lance Taylor <ian@cygnus.com>
1263 * mips-dis.c (print_insn_arg): Print condition code registers as
1266 Tue Sep 3 12:09:46 1996 Doug Evans <dje@canuck.cygnus.com>
1268 * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx.
1271 Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com)
1273 * v850-dis.c (disassemble): Make static. Provide prototype.
1275 Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com)
1277 * v850-opc.c (insert_d9, insert_d22): Fix boundary case
1280 Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com)
1282 * v850-dis.c (disassemble): Handle insertion of ',', '[' and
1283 ']' characters into the output stream.
1284 * v850-opc.c (v850_opcodes: Remove size field from all opcodes.
1285 Add "memop" field to all opcodes (for the disassembler).
1286 Reorder opcodes so that "nop" comes before "mov" and "jr"
1287 comes before "jarl".
1289 * v850-dis.c (print_insn_v850): Fix typo in last change.
1291 * v850-dis.c (print_insn_v850): Properly handle disassembling
1292 a two byte insn at the end of a memory region when the memory
1293 region's size is only two byte aligned.
1295 * v850-dis.c (v850_cc_names): Fix stupid thinkos.
1297 * v850-dis.c (v850_reg_names): Define.
1298 (v850_sreg_names, v850_cc_names): Likewise.
1299 (disassemble): Very rough cut at printing operands (unformatted).
1301 * v850-opc.c (BOP_MASK): Fix.
1302 (v850_opcodes): Fix mask for jarl and jr.
1304 * v850-dis.c: New file. Skeleton for disassembler support.
1305 * Makefile.in Remove v850 references, they're not needed here
1306 and they weren't being sanitized away.
1307 * configure.in: Add v850-dis.o when building v850 toolchains.
1308 * configure: Rebuilt.
1309 * disassemble.c (disassembler): Call v850 disassembler.
1311 * v850-opc.c (insert_d8_7, extract_d8_7): New functions.
1312 (insert_d8_6, extract_d8_6): New functions.
1313 (v850_operands): Rename D7S to D7; operand for D7 is unsigned.
1314 Rename D8 to D8_7, use {insert,extract}_d8_7 routines.
1316 (IF4A, IF4B): Use "D7" instead of "D7S".
1317 (IF4C, IF4D): Use "D8_7" instead of "D8".
1318 (IF4E, IF4F): New. Use "D8_6".
1319 (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for
1320 sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w.
1322 * v850-opc.c (insert_d16_15, extract_d16_15): New functions.
1323 (v850_operands): Change D16 to D16_15, use special insert/extract
1324 routines. New new D16 that uses the generic insert/extract code.
1325 (IF7A, IF7B): Use D16_15.
1326 (IF7C, IF7D): New. Use D16.
1327 (v850_opcodes): Use IF7C and IF7D for ld.b and st.b.
1329 * v850-opc.c (insert_d9, insert_d22): Slightly improve error
1330 message. Issue an error if the branch offset is odd.
1332 * v850-opc.c: Add notes about needing special insert/extract
1333 for all the load/store insns, except "ld.b" and "st.b".
1335 * v850-opc.c (insert_d22, extract_d22): New functions.
1336 (v850_operands): Use insert_d22 and extract_d22 for
1338 (insert_d9): Fix range check.
1340 Fri Aug 30 18:01:02 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1342 * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag
1343 and set bits field to D9 and D22 operands.
1345 Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com)
1347 * v850-opc.c (v850_operands): Define SR2 operand.
1348 (v850_opcodes): "ldsr" uses R1,SR2.
1350 * v850-opc.c (v850_opcodes): Fix opcode specs for
1351 sld.w, sst.b, sst.h, sst.w, and nop.
1353 Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com)
1355 * v850-opc.c (v850_opcodes): Add null opcode to mark the
1356 end of the opcode table.
1359 Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1361 * d10v-opc.c (pre_defined_registers): Added register pairs,
1362 "r0-r1", "r2-r3", etc.
1365 Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
1367 * v850-opc.c (v850_operands): Make I16 be a signed operand.
1368 Create I16U for an unsigned 16bit mmediate operand.
1369 (v850_opcodes): Use I16U for "ori", "andi" and "xori".
1371 * v850-opc.c (v850_operands): Define EP operand.
1372 (IF4A, IF4B, IF4C, IF4D): Use EP.
1374 * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov"
1375 with immediate operand, "movhi". Tweak "ldsr".
1377 * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw]
1378 correct. Get sld.[bhw] and sst.[bhw] closer.
1380 * v850-opc.c (v850_operands): "not" is a two byte insn
1382 * v850-opc.c (v850_opcodes): Correct bit pattern for setf.
1384 * v850-opc.c (v850_operands): D16 inserts at offset 16!
1386 * v850-opc.c (two): Get order of words correct.
1388 * v850-opc.c (v850_operands): I16 inserts at offset 16!
1390 * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system
1391 register source and destination operands.
1392 (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr".
1394 * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix
1395 same thinko in "trap" opcode.
1397 * v850-opc.c (v850_opcodes): Add initializer for size field
1400 * v850-opc.c (v850_operands): D6 -> DS7. References changed.
1401 Add D8 for 8-bit unsigned field in short load/store insns.
1402 (IF4A, IF4D): These both need two registers.
1403 (IF4C, IF4D): Define. Use 8-bit unsigned field.
1404 (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use
1405 IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand
1406 for "ldsr" and "stsr".
1407 * v850-opc.c (v850_operands): 3-bit immediate for bit insns
1410 * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and
1411 short store word (sst.w).
1413 Thu Aug 22 16:57:27 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1415 * v850-opc.c (v850_operands): Added insert and extract fields,
1416 pointers to functions that handle unusual operand encodings.
1418 Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com)
1420 * v850-opc.c (v850_opcodes): Enable "trap".
1422 * v850-opc.c (v850_opcodes): Fix order of displacement
1423 and register for "set1", "clr1", "not1", and "tst1".
1425 Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com)
1427 * v850-opc.c (v850_operands): Add "B3" support.
1428 (v850_opcodes): Fix and enable "set1", "clr1", "not1"
1431 * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand.
1433 * v850-opc.c: Close unterminated comment.
1435 Wed Aug 21 17:31:26 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1437 * v850-opc.c (v850_operands): Add flags field.
1438 (v850_opcodes): add move opcodes.
1440 Tue Aug 20 14:41:03 1996 J.T. Conklin <jtc@hippo.cygnus.com>
1442 * Makefile.in (ALL_MACHINES): Add v850-opc.o.
1443 * configure: (bfd_v850v_arch) Add new case.
1444 * configure.in: (bfd_v850_arch) Add new case.
1445 * v850-opc.c: New file.
1448 Mon Aug 19 15:21:38 1996 Doug Evans <dje@canuck.cygnus.com>
1450 * sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
1452 Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1454 * d10v-opc.c: Add additional information to the opcode
1455 table to help determinine which instructions can be done
1458 Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
1460 * mpw-make.sed: Update editing of include pathnames to be
1463 Thu Aug 15 16:28:41 1996 James G. Smith <jsmith@cygnus.co.uk>
1465 * arm-opc.h: Added "bx" instruction definition.
1467 Wed Aug 14 17:00:04 1996 Richard Henderson <rth@tamu.edu>
1469 * alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
1471 Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1473 * d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
1475 Fri Aug 9 13:21:59 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1477 * d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
1479 Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
1481 * makefile.vms: Update for alpha-opc changes.
1483 Wed Aug 7 11:55:10 1996 Ian Lance Taylor <ian@cygnus.com>
1485 * i386-dis.c (print_insn_i386): Actually return the correct value.
1486 (ONE, OP_ONE): #ifdef out; not used.
1488 Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1490 * d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
1491 Changed subi operand type to treat 0 as 16.
1493 Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
1495 * m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
1498 Wed Jul 31 14:39:27 1996 James G. Smith <jsmith@cygnus.co.uk>
1500 * arm-opc.h: (arm_opcodes): Added halfword and sign-extension
1501 memory transfer instructions. Add new format string entries %h and %s.
1502 * arm-dis.c: (print_insn_arm): Provide decoding of the new
1505 Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1507 * d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
1508 (d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
1510 Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
1512 * alpha-dis.c (print_insn_alpha_osf): Remove.
1513 (print_insn_alpha_vms): Remove.
1514 (print_insn_alpha): Make globally visible. Chose the register
1515 names based on info->flavour.
1516 * disassemble.c: Always return print_insn_alpha for the alpha.
1518 Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1520 * d10v-dis.c (dis_long): Handle unknown opcodes.
1522 Thu Jul 25 12:08:09 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1524 * d10v-opc.c: Changes to support signed and unsigned numbers.
1525 All instructions with the same name that have long and short forms
1526 now end in ".l" or ".s". Divs added.
1527 * d10v-dis.c: Changes to support signed and unsigned numbers.
1529 Tue Jul 23 11:02:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1531 * d10v-dis.c: Change all functions to use info->print_address_func.
1533 Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
1535 * m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
1536 move ccr/sr insns more strict so that the disassembler only
1537 selects them when the addressing mode is data register.
1539 Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1540 * d10v-opc.c (pre_defined_registers): Declare.
1541 * d10v-dis.c (print_operand): Now uses pre_defined_registers
1542 to pick a better name for the registers.
1544 Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
1546 * sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
1547 operands for fexpand and fpmerge. From Christian Kuehnke
1548 <Christian.Kuehnke@arbi.informatik.uni-oldenburg.de>.
1550 Mon Jul 22 13:17:06 1996 Richard Henderson <rth@tamu.edu>
1552 * alpha-dis.c (print_insn_alpha): No longer the user-visible
1553 print routine. Take new regnames and cpumask arguments.
1554 Kill the environment variable nonsense.
1555 (print_insn_alpha_osf): New function. Do OSF/1 style regnames.
1556 (print_insn_alpha_vms): New function. Do VMS style regnames.
1557 * disassemble.c (disassembler): Test bfd flavour to pick
1558 between OSF and VMS routines. Default to OSF.
1560 Thu Jul 18 17:19:34 1996 Ian Lance Taylor <ian@cygnus.com>
1562 * configure.in: Call AC_SUBST (INSTALL_SHLIB).
1563 * configure: Rebuild.
1564 * Makefile.in (install): Use @INSTALL_SHLIB@.
1566 Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
1568 * configure: (bfd_d10v_arch) Add new case.
1569 * configure.in: (bfd_d10v_arch) Add new case.
1570 * d10v-dis.c: New file.
1571 * d10v-opc.c: New file.
1572 * disassemble.c (disassembler) Add entry for d10v.
1574 Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1576 * m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
1577 to bcc, trapfl, subxl, and wddata discovered by Andreas Schwab.
1579 Mon Jul 15 16:59:55 1996 Stu Grossman (grossman@critters.cygnus.com)
1581 * i386-dis.c: Get rid of print_insn_i8086. Use info.mach to
1582 distinguish between variants of the instruction set.
1583 * sparc-dis.c: Get rid of print_insn_sparclite. Use info.mach to
1584 distinguish between variants of the instruction set.
1586 Fri Jul 12 10:12:01 1996 Stu Grossman (grossman@critters.cygnus.com)
1588 * i386-dis.c (print_insn_i8086): New routine to disassemble using
1589 the 8086 instruction set.
1590 * i386-dis.c: General cleanups. Make most things static. Add
1591 prototypes. Get rid of static variables aflags and dflags. Pass
1592 them as args (to almost everything).
1594 Thu Jul 11 11:58:44 1996 Jeffrey A Law (law@cygnus.com)
1596 * h8300-dis.c (bfd_h8_disassemble): Handle macregs in ldmac insns.
1598 * h8300-dis.c (bfd_h8_disassemble): Handle "ldm.l" and "stm.l".
1600 * h8300-dis.c (bfd_h8_disassemble): "abs" is implicitly two
1601 if the next arg is marked with SRC_IN_DST. Gross.
1603 * h8300-dis.c (bfd_h8_disassemble): Print "exr" when
1604 we're looking for and find EXR.
1606 * h8300-dis.c (bfd_h8_disassemble): We don't have a match
1607 if we're looking for KBIT and we don't find it.
1609 * h8300-dis.c (bfd_h8_disassemble): Mask off unwanted bits
1612 * h8300-dis.c (bfd_h8_disassemble): Don't set plen for
1613 3bit immediate operands.
1615 Tue Jul 9 10:55:20 1996 Ian Lance Taylor <ian@cygnus.com>
1617 * Released binutils 2.7.
1619 * alpha-opc.c: Add new case of "mov". From Klaus Kaempf
1620 <kkaempf@progis.ac-net.de>.
1622 Thu Jul 4 11:42:51 1996 Ian Lance Taylor <ian@cygnus.com>
1624 * alpha-opc.c: Correct second case of "mov" to use OPRL.
1626 Wed Jul 3 16:03:47 1996 Stu Grossman (grossman@critters.cygnus.com)
1628 * sparc-dis.c (print_insn_sparclite): New routine to print
1629 sparclite instructions.
1631 Wed Jul 3 14:21:18 1996 J.T. Conklin <jtc@rtl.cygnus.com>
1633 * m68k-opc.c (m68k_opcodes): Add coldfire support.
1635 Fri Jun 28 15:53:51 1996 Doug Evans <dje@canuck.cygnus.com>
1637 * sparc-opc.c (asi_table): Add #ASI_N, #ASI_N_L, #ASI_NUCLEUS,
1638 #ASI_NUCLEUS_LITTLE. Rename #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_L
1639 to #ASI_AS_IF_USER_{PRIMARY,SECONDARY}_LITTLE.
1641 Tue Jun 25 22:58:31 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
1643 * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
1644 Use autoconf-set values.
1645 (docdir, oldincludedir): Removed.
1646 * configure.in (AC_PREREQ): autoconf 2.5 or higher.
1648 Fri Jun 21 13:53:36 1996 Richard Henderson <rth@tamu.edu>
1650 * alpha-opc.c: New file.
1651 * alpha-opc.h: Remove.
1652 * alpha-dis.c: Complete rewrite to use new opcode table.
1653 * configure.in: For bfd_alpha_arch, use alpha-opc.o.
1654 * configure: Rebuild with autoconf 2.10.
1655 * Makefile.in (ALL_MACHINES): Add alpha-opc.o.
1656 (alpha-dis.o): Depend upon $(INCDIR)/opcode/alpha.h, not
1658 (alpha-opc.o): New target.
1660 Wed Jun 19 15:55:12 1996 Ian Lance Taylor <ian@cygnus.com>
1662 * sparc-dis.c (print_insn_sparc): Remove unused local variable i.
1663 Set imm_added_to_rs1 even if the source and destination register
1666 * sparc-opc.c: Add some two operand forms of the wr instruction.
1668 Tue Jun 18 15:58:27 1996 Jeffrey A. Law <law@rtl.cygnus.com>
1670 * h8300-dis.c (bfd_h8_disassemble): Rename "hmode" argument
1673 * disassemble.c (disassembler): Handle H8/S.
1674 * h8300-dis.c (print_insn_h8300s): New function for H8/S.
1676 Tue Jun 18 18:06:50 1996 Ian Lance Taylor <ian@cygnus.com>
1678 * sparc-opc.c: Add beq/teq as aliases for be/te.
1680 * ppc-opc.c: Fix fcmpo opcode. From Sergei Steshenko
1681 <sergei@msil.sps.mot.com>.
1683 Tue Jun 18 15:08:54 1996 Klaus Kaempf <kkaempf@progis.de>
1685 * makefile.vms: New file.
1687 * alpha-dis.c (print_insn_alpha): Print lda ra,lit(rz) as mov.
1689 Mon Jun 10 18:50:38 1996 Ian Lance Taylor <ian@cygnus.com>
1691 * h8300-dis.c (bfd_h8_disassemble): Always print ABS8MEM with :8,
1694 Tue Jun 4 09:15:53 1996 Doug Evans <dje@canuck.cygnus.com>
1696 * i386-dis.c (OP_OFF): Call append_prefix.
1698 Thu May 23 15:18:23 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1700 * ppc-opc.c (instruction encoding macros): Add explicit casts to
1701 unsigned long to silence a warning from the Solaris PowerPC
1704 Thu Apr 25 19:33:32 1996 Doug Evans <dje@canuck.cygnus.com>
1706 * sparc-opc.c (sparc_opcodes): Add ultrasparc vis extensions.
1708 Mon Apr 22 17:12:35 1996 Doug Evans <dje@blues.cygnus.com>
1710 * sparc-dis.c (X_IMM,X_SIMM): New macros.
1712 (print_insn_sparc): Merge cases i,I,j together. New cases X,Y.
1713 * sparc-opc.c (sparc_opcodes): Use X for 5 bit shift constants,
1714 Y for 6 bit shift constants. Rewrite entries for crdcxt, cwrcxt,
1715 cpush, cpusha, cpull sparclet insns.
1717 Wed Apr 17 14:20:22 1996 Doug Evans <dje@canuck.cygnus.com>
1719 * sparc-dis.c (compute_arch_mask): Replace ANSI style def with K&R.
1721 Thu Apr 11 17:30:02 1996 Ian Lance Taylor <ian@cygnus.com>
1723 * sparc-opc.c: Set F_FBR on floating point branch instructions.
1724 Set F_FLOAT on other floating point instructions.
1726 Mon Apr 8 17:02:48 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1728 * ppc-opc.c (PPC860): Macro for 860/821 specific instructions and
1730 (powerpc_opcodes): Add 860/821 specific SPRs.
1732 Mon Apr 8 14:00:44 1996 Ian Lance Taylor <ian@cygnus.com>
1734 * configure.in: Permit --enable-shared to specify a list of
1735 directories. Set and substitute BFD_PICLIST.
1736 * configure: Rebuild.
1737 * Makefile.in (BFD_PICLIST): Rename from BFD_LIST. Change all
1738 uses. Set to @BFD_PICLIST@.
1740 Fri Apr 5 17:12:27 1996 Jeffrey A Law (law@cygnus.com)
1742 * h8300-dis.c (bfd_h8_disassemble): Use "bit" for L_3 immediates,
1743 not "abs", which may be needed for the absolute in something
1744 like btst #0,@10:8. Print L_3 immediates separately from other
1745 immediates. Change ABSMOV reference to ABS8MEM.
1747 Wed Apr 3 10:40:45 1996 Doug Evans <dje@canuck.cygnus.com>
1749 * sparc-dis.c (opcodes_initialized): Move inside print_insn_sparc.
1750 (current_arch_mask): New static global.
1751 (compute_arch_mask): New static function.
1752 (print_insn_sparc): Delete sparc_v9_p. New static local
1753 current_mach. Resort opcode table if current_mach changes.
1754 Generalize "insn not supported" test.
1755 (compare_opcodes): Prefer supported opcodes to nonsupported ones.
1756 Delete test for v9/!v9.
1757 * sparc-opc.c (MASK_*): Use SPARC_OPCODE_ARCH_MASK.
1759 (brfc): Split into CBR and FBR for coprocessor/fp branches.
1760 (brfcx): Renamed to FBRX.
1761 (condfc): Renamed to CONDFC. Pass v6notlet to CBR (standard
1762 coprocessor mnemonics are not supported on the sparclet).
1763 (condf): Renamed to CONDF.
1764 (SLCBCC2): Delete F_ALIAS flag.
1766 Sat Mar 30 21:45:59 1996 Doug Evans <dje@canuck.cygnus.com>
1768 * sparc-opc.c (sparc_opcodes): rd must be 0 for
1769 mov foo,{%y,%psr,%wim,%tbr}. Support mov foo,%asrX.
1771 Fri Mar 29 13:02:40 1996 Ian Lance Taylor <ian@cygnus.com>
1773 * Makefile.in (config.status): Depend upon BFD VERSION file, so
1774 that the shared library version number is set correctly.
1776 Tue Mar 26 15:47:14 1996 Ian Lance Taylor <ian@cygnus.com>
1778 * configure.in: Use AC_CHECK_TOOL to find ar and ranlib. From
1779 Miles Bader <miles@gnu.ai.mit.edu>.
1780 * configure: Rebuild.
1782 Sat Mar 16 13:04:07 1996 Fred Fish <fnf@cygnus.com>
1784 * z8kgen.c (internal, gas): Call xmalloc rather than unchecked
1787 Tue Mar 12 12:14:10 1996 Ian Lance Taylor <ian@cygnus.com>
1789 * configure: Rebuild with autoconf 2.8.
1791 Thu Mar 7 15:11:10 1996 Doug Evans <dje@charmed.cygnus.com>
1793 * sparc-dis.c (print_insn_sparc): Handle 'O' operand char like 'r'.
1794 * sparc-opc.c (sparc_opcodes): Use 'O' operand char for `neg reg'.
1796 Tue Mar 5 15:51:57 1996 Ian Lance Taylor <ian@cygnus.com>
1798 * configure.in: Don't set SHLIB or SHLINK to an empty string,
1799 since they appear as targets in Makefile.in.
1800 * configure: Rebuild.
1802 Mon Feb 26 13:03:40 1996 Stan Shebs <shebs@andros.cygnus.com>
1804 * mpw-make.sed: Edit out shared library support bits.
1806 Tue Feb 20 20:48:28 1996 Doug Evans <dje@charmed.cygnus.com>
1808 * sparc-opc.c (v8,v6notv9): Add MASK_SPARCLET.
1809 (sparc_opcode_archs): Add MASK_V8 to sparclet entry.
1810 (sparc_opcodes): Add sparclet insns.
1811 (sparclet_cpreg_table): New static local.
1812 (sparc_{encode,decode}_sparclet_cpreg): New functions.
1813 * sparc-dis.c (print_insn_sparc): Handle sparclet cpregs.
1815 Tue Feb 20 11:02:44 1996 Alan Modra <alan@mullet.Levels.UniSA.Edu.Au>
1817 * i386-dis.c (index16): New static variable.
1818 (putop): Print jecxz for 32 bit case, jcxz for 16 bit, not the
1820 (OP_indirE): Return result of OP_E.
1821 (OP_E): Check for 16 bit addressing mode, and disassemble
1822 correctly. Optimised 32 bit case a little. Don't print
1823 "(base,index,scale)" when sib specifies only an offset.
1825 Mon Feb 19 12:32:17 1996 Ian Lance Taylor <ian@cygnus.com>
1827 * configure.in: Set and substitute SHLIB_DEP.
1828 * configure: Rebuild.
1829 * Makefile.in (SHLIB_DEP): New variable.
1830 (LIBIBERTY_LISTS, BFD_LIST): New variables.
1831 (stamp-piclist): Depend upon LIBIBERTY_LISTS and BFD_LIST. If
1832 COMMON_SHLIB, add them to piclist with appropriate modifications.
1833 ($(SHLIB)): Depend upon $(SHLIB_DEP). Don't check COMMON_SHLIB
1834 here: just use piclist.
1836 Mon Feb 19 02:03:50 1996 Doug Evans <dje@charmed.cygnus.com>
1838 * sparc-dis.c (MASK_V9,V9_ONLY_P,V9_P): Define.
1839 (print_insn_sparc): Rewrite v9/not-v9 tests.
1840 (compare_opcodes): Likewise.
1841 * sparc-opc.c (MASK_<ARCH>): Define.
1842 (v6,v7,v8,sparclite,v9,v9a): Redefine.
1843 (sparclet,v6notv9): Define.
1844 (sparc_opcode_archs): Delete member `conflicts'. Add `supported'.
1845 (sparc_opcodes): Delete F_NOTV9, use v6notv9 instead.
1847 Thu Feb 15 14:45:05 1996 Ian Lance Taylor <ian@cygnus.com>
1849 * configure.in: Call AC_PROG_CC before configure.host.
1850 * configure: Rebuild.
1852 * Makefile.in (SONAME): Remove leading ../bfd/ from $(SHLIB).
1854 Wed Feb 14 19:01:27 1996 Alan Modra <alan@spri.levels.unisa.edu.au>
1856 * i386-dis.c (onebyte_has_modrm): New static array.
1857 (twobyte_has_modrm): New static array.
1858 (print_insn_i386): Only fetch the mod/reg/rm byte if it is needed.
1860 Tue Feb 13 15:15:01 1996 Ian Lance Taylor <ian@cygnus.com>
1862 * Makefile.in ($(SHLINK)): Check ts against $(SHLIB), not
1865 Mon Feb 12 16:26:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
1867 * ppc-opc.c (PPC): Undef, so default defination on Windows NT
1870 Wed Feb 7 13:59:54 1996 Ian Lance Taylor <ian@cygnus.com>
1872 * m68k-opc.c (m68k_opcodes): The bkpt instruction is supported on
1873 m68010up, not just m68020up | cpu32.
1875 * Makefile.in (SONAME): New variable.
1876 ($(SHLINK)): Make a link to the transformed name, as well.
1877 (stamp-tshlink): New target.
1878 (install): Skip stamp-tshlink during install.
1880 Tue Feb 6 12:28:54 1996 Ian Lance Taylor <ian@cygnus.com>
1882 * configure.in: Call AC_ARG_PROGRAM.
1883 * configure: Rebuild.
1884 * Makefile.in (program_transform_name): New variable.
1885 (install): Transform library name before installing it.
1887 Mon Feb 5 16:14:42 1996 Ian Lance Taylor <ian@cygnus.com>
1889 * i960-dis.c (mem): Add HX dcinva instruction.
1891 Support for building as a shared library, based on patches from
1892 Alan Modra <alan@spri.levels.unisa.edu.au>:
1893 * configure.in: Add AC_ARG_ENABLE for shared and commonbfdlib.
1894 New substitutions: ALLLIBS, PICFLAG, SHLIB, SHLIB_CC,
1895 SHLIB_CFLAGS, COMMON_SHLIB, SHLINK.
1896 * configure: Rebuild.
1897 * Makefile.in (ALLLIBS): New variable.
1898 (PICFLAG, SHLIB, SHLIB_CC, SHLIB_CFLAGS): New variables.
1899 (COMMON_SHLIB, SHLINK): New variables.
1900 (.c.o): If PICFLAG is set, compile twice, once PIC, once normal.
1901 (STAGESTUFF): Remove variable.
1902 (all): Depend upon $(ALLLIBS) rather than $(TARGETLIB).
1903 (stamp-piclist, piclist): New targets.
1904 ($(SHLIB), $(SHLINK)): New targets.
1905 ($(OFILES)): Depend upon stamp-picdir.
1906 (disassemble.o): Build twice if PICFLAG is set.
1907 (MOSTLYCLEAN): Add pic/*.o.
1908 (clean): Remove $(SHLIB), $(SHLINK), piclist, and stamp-piclist.
1909 (distclean): Remove pic and stamp-picdir.
1910 (install): Install shared libraries.
1911 (stamp-picdir): New target.
1913 Fri Feb 2 17:15:25 1996 Doug Evans <dje@charmed.cygnus.com>
1915 * sparc-dis.c (print_insn_sparc): Delete DISASM_RAW_INSN support.
1916 Print unknown instruction as "unknown", rather than in hex.
1918 Tue Jan 30 14:06:08 1996 Ian Lance Taylor <ian@cygnus.com>
1920 * dis-buf.c: Include "sysdep.h" before "dis-asm.h".
1922 Thu Jan 25 20:24:07 1996 Doug Evans <dje@charmed.cygnus.com>
1924 * sparc-opc.c (sparc_opcode_archs): Mark v8/sparclite as conflicting.
1926 Thu Jan 25 11:56:49 1996 Ian Lance Taylor <ian@cygnus.com>
1928 * i386-dis.c (print_insn_i386): Only fetch the mod/reg/rm byte
1929 when necessary. From Ulrich Drepper
1930 <drepper@myware.rz.uni-karlsruhe.de>.
1932 Thu Jan 25 03:39:10 1996 Doug Evans <dje@charmed.cygnus.com>
1934 * sparc-dis.c (print_insn_sparc): NUMOPCODES replaced with
1935 sparc_num_opcodes. Update architecture enum values.
1936 * sparc-opc.c (sparc_opcode_archs): Replaces architecture_pname.
1937 (sparc_opcode_lookup_arch): New function.
1938 (sparc_num_opcodes): Renamed from bfd_sparc_num_opcodes.
1939 (sparc_opcodes): Add v9a shutdown insn.
1941 Mon Jan 22 08:29:59 1996 Doug Evans <dje@charmed.cygnus.com>
1943 * sparc-dis.c (print_insn_sparc): Renamed from print_insn.
1944 If DISASM_RAW_INSN, print insn in hex. Handle v9a as opcode
1946 (print_insn_sparc64): Deleted.
1947 * disassemble.c (disassembler, case bfd_arch_sparc): Always use
1950 * sparc-opc.c (architecture_pname): Add v9a.
1952 Fri Jan 12 14:35:58 1996 David Mosberger-Tang <davidm@AZStarNet.com>
1954 * alpha-opc.h (alpha_insn_set): VAX floating point opcode was
1955 incorrectly defined as 0x16 when it should be 0x15.
1956 (FLOAT_FORMAT_MASK): function code is 11 bits, not just 7 bits!
1957 (alpha_insn_set): added cvtst and cvttq float ops. Also added
1958 excb (exception barrier) which is defined in the Alpha
1959 Architecture Handbook version 2.
1960 * alpha-dis.c (print_insn_alpha): Fixed special-case decoding for
1961 OPERATE_FORMAT_CODE type instructions. The bug caused mulq to be
1962 disassembled as or, for example.
1964 Wed Jan 10 12:37:22 1996 Ian Lance Taylor <ian@cygnus.com>
1966 * mips-dis.c (print_insn_arg): Print cases 'i' and 'u' in hex.
1967 (_print_insn_mips): Change i from int to unsigned int.
1969 Thu Jan 4 17:21:10 1996 David Edelsohn <edelsohn@mhpcc.edu>
1971 * ppc-opc.c (powerpc_opcodes): tlbi POWER opcode form different
1972 from tlbie PowerPC opcode. Add PPC603 tlbld and tlbli.
1974 Thu Dec 28 13:29:19 1995 John Hassey <hassey@rtp.dg.com>
1976 * i386-dis.c: Added Pentium Pro instructions.
1978 Tue Dec 19 22:56:35 1995 Michael Meissner <meissner@tiktok.cygnus.com>
1980 * ppc-opc.c (fsqrt{,.}): Duplicate for PowerPC in addition to
1983 Fri Dec 15 14:14:15 1995 J.T. Conklin <jtc@rtl.cygnus.com>
1985 * sh-opc.h (sh_nibble_type): Added REG_B.
1986 (sh_arg_type): Added A_REG_B.
1987 (sh_table): Added pref and bank reg versions of ldc, ldc.l, stc
1989 * sh-dis.c (print_insn_shx): Added cases for REG_B and A_REG_B.
1991 Fri Dec 15 16:44:31 1995 Ian Lance Taylor <ian@cygnus.com>
1993 * disassemble.c (disassembler): Use new bfd_big_endian macro.
1995 Tue Dec 12 12:22:24 1995 Ian Lance Taylor <ian@cygnus.com>
1997 * Makefile.in (distclean): Remove stamp-h. From Ronald
1998 F. Guilmette <rfg@monkeys.com>.
2000 Tue Dec 5 13:42:44 1995 Stan Shebs <shebs@andros.cygnus.com>
2002 From David Mosberger-Tang <davidm@azstarnet.com>:
2003 * alpha-dis.c (print_insn_alpha): fixed decoding of cpys
2006 Mon Dec 4 12:29:05 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2008 * sh-opc.h (sh_arg_type): Added A_SSR and A_SPC.
2009 (sh_table): Added many SH3 opcodes.
2010 * sh-dis.c (print_insn_shx): Added cases for A_SSR and A_SPC.
2012 Fri Dec 1 07:42:18 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2014 * ppc-opc.c (subfc., subfco): Mark this PPCCOM, not PPC.
2015 (subco,subco.): Mark this PPC, not PPCCOM.
2017 Mon Nov 27 13:09:52 1995 Ian Lance Taylor <ian@cygnus.com>
2019 * configure: Rebuild with autoconf 2.7.
2021 Tue Nov 21 18:28:06 1995 Ian Lance Taylor <ian@cygnus.com>
2023 * configure: Rebuild with autoconf 2.6.
2025 Wed Nov 15 19:02:53 1995 Ken Raeburn <raeburn@cygnus.com>
2027 * configure.in: Sort list of architectures. Accept but do nothing
2028 for alliant, convex, pyramid, romp, and tahoe.
2030 Wed Nov 8 20:18:59 1995 Ian Lance Taylor <ian@cygnus.com>
2032 * a29k-dis.c (print_special): Change num to unsigned int.
2034 Wed Nov 8 20:10:35 1995 Eric Freudenthal <freudenthal@nyu.edu>
2036 * a29k-dis.c (print_insn): Cast insn24 to unsigned long when
2039 Tue Nov 7 15:21:06 1995 Ian Lance Taylor <ian@cygnus.com>
2041 * configure.in: Call AC_CHECK_PROG to find and cache AR.
2042 * configure: Rebuilt.
2044 Mon Nov 6 17:39:47 1995 Harry Dolan <dolan@ssd.intel.com>
2046 * configure.in: Add case for bfd_i860_arch.
2047 * configure: Rebuild.
2049 Fri Nov 3 12:45:31 1995 Ian Lance Taylor <ian@cygnus.com>
2051 * m68k-opc.c (m68k_opcodes): Correct fmoveml operands.
2052 * m68k-dis.c (NEXTSINGLE): Change i to unsigned int.
2053 (NEXTDOUBLE): Likewise.
2054 (print_insn_m68k): Don't match fmoveml if there is more than one
2055 register in the list.
2056 (print_insn_arg): Handle a place of '8' for a type of 'L'.
2058 Thu Nov 2 23:06:33 1995 Ian Lance Taylor <ian@cygnus.com>
2060 * m68k-opc.c: Use #W rather than #w.
2061 * m68k-dis.c (print_insn_arg): Handle new 'W' place.
2063 Wed Nov 1 13:30:24 1995 Ian Lance Taylor <ian@cygnus.com>
2065 * m68k-opc.c (m68k_opcode_aliases): Add dbfw as an alias for dbf,
2066 and likewise for all the dbxx opcodes.
2068 Mon Oct 30 20:50:40 1995 Fred Fish <fnf@cygnus.com>
2070 * arc-dis.c: Include elf-bfd.h rather than libelf.h.
2072 Mon Oct 23 11:11:34 1995 James G. Smith <jsmith@pasanda.cygnus.co.uk>
2074 * mips-opc.c: Added shorthand (V1) for INSN_4100 manifest. Added
2075 the VR4100 specific instructions to the mips_opcodes structure.
2077 Thu Oct 19 11:05:23 1995 Stan Shebs <shebs@andros.cygnus.com>
2079 * mpw-config.in, mpw-make.sed: Remove ugly workaround for
2080 ugly Metrowerks bug in CW6, is fixed in CW7.
2082 Mon Oct 16 12:59:01 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2084 * ppc-opc.c (whole file): Add flags for common/any support.
2086 Tue Oct 10 11:06:07 1995 Fred Fish <fnf@cygnus.com>
2088 * Makefile.in (BISON): Remove macro.
2089 (FLAGS_TO_PASS): Remove BISON.
2091 Fri Oct 6 16:26:45 1995 Ken Raeburn <raeburn@cygnus.com>
2093 Mon Sep 25 22:49:32 1995 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
2095 * m68k-dis.c (print_insn_m68k): Recognize all two-word
2096 instructions that take no args by looking at the match mask.
2097 (print_insn_arg): Always print "%" before register names.
2098 [case 'c']: Use "nc" for the no-cache case, as recognized by gas.
2099 [case '_']: Don't print "@#" before address.
2100 [case 'J']: Use "%s" as format string, not register name.
2101 [case 'B']: Treat place == 'C' like 'l' and 'L'.
2103 Thu Oct 5 22:16:20 1995 Ken Raeburn <raeburn@cygnus.com>
2105 * i386-dis.c: Describe cmpxchg8b operand, and spell the opcode
2108 Tue Oct 3 08:30:20 1995 steve chamberlain <sac@slash.cygnus.com>
2110 From David Mosberger-Tang <davidm@azstarnet.com>
2112 * alpha-opc.h (MEMORY_FUNCTION_FORMAT_MASK): added.
2113 (alpha_insn_set): added definitions for VAX floating point
2114 instructions (Unix compilers don't generate these, but handcoded
2115 assembly might still use them).
2117 * alpha-dis.c (print_insn_alpha): added support for disassembling
2118 the miscellaneous instructions in the Alpha instruction set.
2120 Tue Sep 26 18:47:20 1995 Stan Shebs <shebs@andros.cygnus.com>
2122 * mpw-config.in: Add m68k-opc.c.o to BFD_MACHINES for m68k,
2123 no longer create sysdep.h, sed ppc-opc.c to work around a
2124 serious Metrowerks C bug.
2125 * mpw-make.in: Remove.
2126 * mpw-make.sed: New file, used by mpw-configure to edit
2127 Makefile.in into an MPW makefile.
2129 Wed Sep 20 12:55:28 1995 Ian Lance Taylor <ian@cygnus.com>
2131 * Makefile.in (maintainer-clean): New synonym for realclean.
2133 Tue Sep 19 15:28:36 1995 Ian Lance Taylor <ian@cygnus.com>
2135 * m68k-opc.c: Split pmove patterns which use 'P' into patterns
2136 which use '0', '1', and '2' instead. Specify the proper size for
2137 a pmove immediate operand. Correct the pmovefd patterns to be
2138 moves to a register, not from a register.
2139 * m68k-dis.c (print_insn_arg): Replace 'P' with '0', '1', '2'.
2141 Thu Sep 14 11:58:22 1995 Doug Evans <dje@canuck.cygnus.com>
2143 * sparc-opc.c (sparc_opcodes): Mark all insns that reference
2144 %psr, %wim, %tbr as F_NOTV9.
2146 Fri Sep 8 01:07:38 1995 Ian Lance Taylor <ian@cygnus.com>
2148 * Makefile.in (Makefile): Just rebuild Makefile when running
2150 (config.h, stamp-h): New targets.
2151 * configure.in: Call AC_CONFIG_HEADER and AC_CANONICAL_SYSTEM
2152 earlier. Don't bother to call AC_ARG_PROGRAM. Touch stamp-h when
2153 rebuilding config.h.
2154 * configure: Rebuild.
2156 * mips-opc.c: Change unaligned loads and stores with "t,A"
2157 operands to use "t,A(b)".
2159 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2161 * sh-dis.c (print_insn_shx): Add F_FR0 support.
2163 Thu Sep 7 19:02:46 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2165 * sh-dis.c (print_insn_shx): Change loop over op->arg[n] to iterate
2166 until 3 instead of until 2.
2168 Wed Sep 6 21:21:33 1995 Ian Lance Taylor <ian@cygnus.com>
2170 * Makefile.in (ALL_CFLAGS): Define.
2171 (.c.o, disassemble.o): Use $(ALL_CFLAGS).
2172 (MOSTLYCLEAN): Add config.log.
2173 (distclean): Don't remove config.log.
2174 * configure.in: Substitute HDEFINES.
2175 * configure: Rebuild.
2177 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2179 * sh-opc.h (sh_arg_type): Add F_FR0.
2180 (sh_table, case fmac): Add F_FR0 as first argument.
2182 Wed Sep 6 15:08:09 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2184 * sh-opc.h (sh_opcode_info): Increase arg array size to 4.
2186 Tue Sep 5 18:28:10 1995 Doug Evans <dje@canuck.cygnus.com>
2188 * sparc-dis.c: Remove all references to NO_V9.
2190 Tue Sep 5 20:03:26 1995 Ian Lance Taylor <ian@cygnus.com>
2192 * aclocal.m4: Just include ../bfd/aclocal.m4.
2193 * configure: Rebuild.
2195 Tue Sep 5 16:09:59 1995 Doug Evans <dje@canuck.cygnus.com>
2197 * sparc-dis.c (X_DISP19): Define.
2198 (print_insn, case 'G'): Use it.
2199 (print_insn, case 'L'): Sign extend displacement.
2201 Mon Sep 4 14:28:46 1995 Ian Lance Taylor <ian@cygnus.com>
2203 * configure.in: Run ../bfd/configure.host before AC_PROG_CC.
2204 Subsitute CFLAGS and AR. Call AC_PROG_INSTALL. Don't substitute
2205 host_makefile_frag or frags.
2206 * aclocal.m4: New file.
2207 * configure: Rebuild.
2208 * Makefile.in (INSTALL): Set to @INSTALL@.
2209 (INSTALL_PROGRAM): Set to @INSTALL_PROGRAM@.
2210 (INSTALL_DATA): Set to @INSTALL_DATA@.
2212 (AR_FLAGS): Set to rc rather than qc.
2213 (CC): Define as @CC@.
2214 (CFLAGS): Set to @CFLAGS@.
2215 (@host_makefile_frag@): Remove.
2216 (config.status): Remove dependency upon @frags@.
2218 * configure.in: ../bfd/config.bfd now just sets shell variables.
2219 Use them rather than looking through target Makefile fragments.
2220 * configure: Rebuild.
2222 Thu Aug 31 12:35:32 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2224 * sh-opc.h (ftrc): Change FPUL_N to FPUL_M.
2226 Wed Aug 30 13:52:28 1995 Doug Evans <dje@canuck.cygnus.com>
2228 * sparc-opc.c (sparc_opcodes): Delete duplicate wr %y insn.
2229 Add clrx, iprefetch, signx, clruw, cas, casl, casx, casxl synthetic
2232 * sparc-opc.c (sparc_opcodes): Fix prefetcha insn.
2233 (lookup_{name,value}): New functions.
2234 (prefetch_table): New static local.
2235 (sparc_{encode,decode}_prefetch): New functions.
2236 * sparc-dis.c (print_insn): Handle '*' arg (prefetch function).
2238 Wed Aug 30 11:11:58 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2240 * sh-opc.h: Add blank lines to improve readabililty of sh3e
2243 Wed Aug 30 11:09:38 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2245 * sh-dis.c: Correct comment on first line of file.
2247 Tue Aug 29 15:37:18 1995 Doug Evans <dje@canuck.cygnus.com>
2249 * disassemble.c (disassembler): Handle bfd_mach_sparc64.
2251 * sparc-opc.c (asi, membar): New static locals.
2252 (sparc_{encode,decode}_{asi,membar}): New functions.
2253 (sparc_opcodes, membar insn): Fix.
2254 * sparc-dis.c (print_insn): Call sparc_decode_asi.
2255 Support decoding of membar masks.
2258 Sat Aug 26 21:22:48 1995 Ian Lance Taylor <ian@cygnus.com>
2260 * m68k-opc.c (m68k_opcode_aliases): Add br, brs, brb, brw, brl.
2262 Mon Aug 21 17:33:36 1995 Ian Lance Taylor <ian@cygnus.com>
2264 * m68k-opc.c (m68k_opcode_aliases): Add bhib as an alias for bhis,
2265 and likewise for the other branches. Add bhs as an alias for bcc,
2266 and likewise for the size variants. Add dbhs as an alias for
2269 Fri Aug 11 13:40:24 1995 Jeff Law (law@snake.cs.utah.edu)
2271 * sh-opc.h (FP sts instructions): Update to match reality.
2273 Mon Aug 7 16:12:58 1995 Ian Lance Taylor <ian@cygnus.com>
2275 * m68k-dis.c: (fpcr_names): Add % before all register names.
2276 (reg_names): Likewise.
2277 (print_insn_arg): Don't explicitly print % before register names.
2278 Add % before register names in static array names. In case 'r',
2279 print data registers as `@(Dn)', not `Dn@'. When printing a
2280 memory address, don't print @# before it.
2281 (print_indexed): Change base_disp and outer_disp from int to
2282 bfd_vma. Print using MIT syntax, not mutant invalid Motorola
2283 syntax. Sign extend 8 byte displacement correctly.
2284 (print_base): Print using MIT syntax. Print zpc when appropriate.
2285 Change parameter disp from int to bfd_vma.
2287 * m68k-opc.c (m68k_opcode_aliases): Add jsrl and jsrs as aliases
2290 Mon Aug 7 02:21:40 1995 Jeff Law (law@snake.cs.utah.edu)
2292 * sh-dis.c (print_insn_shx): Handle new operand types F_REG_N,
2293 F_REG_M, FPSCR_M, FPSCR_N, FPUL_M and FPUL_N.
2294 * sh-opc.h (sh_arg_type): Add new operand types.
2295 (sh_table): Add new opcodes from SH3E Floating Point ISA.
2297 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2299 * Makefile.in (distclean): Remove generated file config.h.
2301 Sat Aug 5 16:50:14 1995 Fred Fish <fnf@cygnus.com>
2303 * Makefile.in (distclean): Remove generated file config.h.
2305 Wed Aug 2 18:33:40 1995 Ian Lance Taylor <ian@cygnus.com>
2307 * m68k-opc.c: New file, holding tables from include/opcode/m68k.h.
2309 * m68k-dis.c: Remove BREAK_UP_BIG_DECL stuff.
2311 (print_insn_m68k): Change d to be const. Use m68k_numopcodes
2312 rather than numopcodes. Use m68k_opcodes rather than removed
2313 opcode function. Don't check F_ALIAS.
2314 (print_insn_arg): Change first parameter to be const char *.
2315 * Makefile.in (ALL_MACHINES): Add m68k-opc.o.
2316 (m68k-opc.o): New target.
2317 * configure.in: Build m68k-opc.o for bfd_m68k_arch.
2318 * configure: Rebuild.
2320 Wed Aug 2 08:23:38 1995 Doug Evans <dje@canuck.cygnus.com>
2322 * sparc-dis.c (HASH_SIZE, HASH_INSN): Define.
2323 (opcode_bits, opcode_hash_table): New variables.
2324 (opcodes_initialized): Renamed from opcodes_sorted.
2325 (build_hash_table): New function.
2326 (is_delayed_branch): Use hash table.
2327 (print_insn): Renamed from print_insn_sparc, made static.
2328 Build and use hash table. If !sparc64, ignore sparc64 insns,
2329 and vice-versa if sparc64.
2330 (print_insn_sparc, print_insn_sparc64): New functions.
2331 (compare_opcodes): Move sparc64 opcodes to end.
2332 Print commutative insns with constant second.
2333 * sparc-opc.c (all non-v9 insns): Use flag F_NOTV9 instead of F_ALIAS.
2335 Tue Aug 1 00:12:49 1995 Ian Lance Taylor <ian@cygnus.com>
2337 * sh-dis.c (print_insn_shx): Remove unused local dslot. Use
2338 print_address_func for A_BDISP12 and A_BDISP8. Correct test which
2339 avoids printing a delay slot in a delay slot.
2340 * sh-opc.h (sh_table): Fully bracket last entry.
2342 Mon Jul 31 12:04:47 1995 Doug Evans <dje@canuck.cygnus.com>
2344 * sparc-opc.c (sllx, srax, srlx): Fix disassembly.
2346 Wed Jul 12 00:59:34 1995 Ken Raeburn <raeburn@kr-pc.cygnus.com>
2348 * configure.in: Get host_makefile_frag from ${srcdir}.
2350 * configure.in: Autoconfiscated. Check for string[s].h. Create
2351 config.h from config.in. Don't set up sysdep.h link.
2352 * sysdep.h: New file.
2353 * configure, config.in: New files, generated from configure.in.
2354 * Makefile.in: Updated to be processed autoconf-style.
2355 (distclean): Keep sysdep.h. Remove config.log and config.cache.
2356 (Makefile): Depend on config.status.
2357 (config.status): New rule.
2358 * configure.bat: Update Makefile substitutions.
2360 Tue Jul 11 14:23:37 1995 Jeff Spiegel <jeffs@lsil.com>
2362 * mips-opc.c (L1): Define.
2363 (mips_opcodes): Add R4010 instructions: flushi, flushd, flushid,
2364 addciu, madd, maddu, ffc, ffs, msub, msubu, selsi, selsr, waiti,
2367 Tue Jul 11 11:49:49 1995 Ian Lance Taylor <ian@cygnus.com>
2369 * mips-opc.c (mips_opcodes): For the move pseudo-op, prefer daddu
2370 if ISA 3 and addu otherwise, replacing or, since some MIPS chips
2371 have multiple add units but only a single logical unit.
2373 * ppc-opc.c (powerpc_operands): Change CR to use a bitsize of 3,
2374 shifted by 18, without any insertion or extraction function.
2375 (insert_cr, extract_cr): Remove.
2377 Wed Jun 21 20:05:39 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2379 * m68k-dis.c (print_insn_arg, print_indexed): Print "%" before
2382 Thu Jun 15 17:23:31 1995 Stan Shebs <shebs@andros.cygnus.com>
2384 * mpw-config.in: Add sh and i386 configs, remove sparc config.
2385 * sh-opc.h: Add copyright.
2387 Mon Jun 5 03:30:43 1995 Ken Raeburn <raeburn@kr-laptop.cygnus.com>
2389 * Makefile.in (crunch-m68k): Delete extra target accidentally
2390 checked in a while ago.
2392 Wed May 24 16:22:13 1995 Jim Wilson <wilson@chestnut.cygnus.com>
2394 * sh-opc.h (sh_table): Add SH3 support.
2396 Wed May 24 14:16:08 1995 Steve Chamberlain <sac@slash.cygnus.com>
2398 * sh-opc.h: Added bsrf and braf.
2400 Wed May 10 14:28:16 1995 Richard Earnshaw (rearnsha@armltd.co.uk)
2402 * arm-opc.h (arm_opcodes): Add 64-bit multiply patterns. Delete
2403 bogus [ls]fm{ea,fd} patterns.
2405 * arm-opc.h (arm_opcodes): Correct typos in stm, ldm, std, and ldc.
2406 * arm-dis.c (print_insn_arm): Make GIVEN a parameter, don't try and
2407 initialize it from memory. Make function static.
2408 (print_insn_{big,little}_arm): New functions.
2409 * disassemble.c (disassembler, case bfd_arch_arm): Disassemble for
2410 the correct endianness.
2412 Mon Apr 24 14:18:05 1995 Jason Molenda (crash@phydeaux.cygnus.com>
2414 * sh-opc.h (sh_nibble_type, sh_arg_type): remove trailing , from
2417 Wed Apr 19 14:07:03 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2419 * m68k-dis.c (opcode): Finish change made by Kung Hsu on April
2420 17th, so that it builds again using GCC as the compiler.
2422 Tue Apr 18 12:14:51 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2424 * mips-dis.c (print_insn_little_mips): Cast return value from
2425 bfd_getl32 from bfd_vma to unsigned long, because _print_insn_mips
2426 expects an unsigned long, and that might be fewer words of
2427 argument storage (e.g., if bfd_vma is long long on a 32-bit
2429 (print_insn_big_mips): Likewise with bfd_getb32 value.
2430 (_print_insn_mips): Now static.
2432 Mon Apr 17 12:23:28 1995 Kung Hsu <kung@rtl.cygnus.com>
2434 * m68k-dis.c: Take out #define BREAK_UP_BIG_DECL kludge, because
2435 gcc memory hog problem with initializer is fixed.
2437 Mon Apr 10 15:55:01 1995 Stan Shebs <shebs@andros.cygnus.com>
2439 Merge in support for Mac MPW as a host.
2440 (Old change descriptions retained for informational value.)
2442 * mpw-config.in (archname): Compute from the config.
2443 (BFD_MACHINES, ARCHDEFS): Put into mk.tmp.
2445 * mpw-config.in (target_arch): Compute from canonical target.
2446 (m68k, mips, powerpc, sparc): Add architectures.
2447 * mpw-make.in (disassemble.c.o): Add.
2448 (ALL_CFLAGS): Remove special flags (-mc68020 -mc68881 -model far).
2450 * mpw-config.in (BFD_MACHINES): Set to a default value.
2451 * mpw-make.in (BFD_MACHINES): Remove wired-in value.
2453 * mpw-make.in (CSEARCH): Add extra-include to search path.
2455 * mpw-config.in (varargs.h): Don't create.
2456 (sysdep.h): Create using forward-include.
2457 * mpw-make.in (CSEARCH): Add include/mpw to search path.
2459 * mpw-config.in: New file, MPW version of configure.in.
2460 * mpw-make.in: New file, MPW version of Makefile.in.
2462 Fri Mar 31 14:23:38 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2464 * alpha-dis.c (print_insn_alpha): Put empty statement after
2467 Tue Mar 21 10:51:40 1995 Jeff Law (law@snake.cs.utah.edu)
2469 * hppa-dis.c (sign_extend): Delete, redundant with libhppa.h version.
2470 (low_sign_extend): Likewise.
2471 (get_field): Delete unused function.
2472 (set_field, deposit_14, deposit_21): Likewise.
2474 Fri Mar 17 15:55:53 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2476 * i386-dis.c: Support for more pentium opcodes. From Guy Harris
2479 Tue Mar 14 00:52:57 1995 Ken Raeburn (raeburn@kr-pc.cygnus.com)
2481 Sat Feb 11 17:22:41 1995 Klaus Kaempf (kkaempf@didymus.rmi.de)
2483 * alpha-opc.h (OSF_ASMCODE): define
2484 print pal-code names as defined in App C of the
2485 Alpha Architecture Reference Manual
2487 * alpha-dis.c: cleaned up output
2488 print stylized code forms as defined in App A.4.3 of the
2489 Alpha Architecture Reference Manual
2491 Wed Mar 8 15:21:14 1995 Ian Lance Taylor <ian@cygnus.com>
2493 * mips-opc.c: Add new mips4 instructions. Don't set INSN_RFE for
2495 * mips-dis.c (print_insn_arg): Handle new argument types 'h', 'R',
2498 Wed Mar 8 02:54:05 1995 Ken Raeburn <raeburn@cujo.cygnus.com>
2500 * m68k-dis.c (opcode): New function. Returns address of opcode
2501 table entry given index, even if the opcode table was split to
2502 work around gcc bugs.
2503 (print_insn_m68k): Call opcode instead of referencing m68k_opcodes
2505 (BREAK_UP_BIG_DECL): Make secondary array static and const.
2506 (reg_names): Now const.
2507 (print_insn_arg): Arrays cacheFieldName and names now const.
2508 (print_indexed): Array scales now const.
2510 Tue Mar 7 16:41:21 1995 Ian Lance Taylor <ian@cygnus.com>
2512 * ppc-opc.c: Sort recently added instructions by minor opcode
2513 number within major opcode number.
2515 Mon Mar 6 10:04:36 1995 Jeff Law (law@snake.cs.utah.edu)
2517 * hppa-dis.c: Include libhppa.h.
2519 Fri Feb 24 19:15:36 1995 Ian Lance Taylor <ian@cygnus.com>
2521 * mips-opc.c: Change dli to use M_DLI, and add dla.
2523 Mon Feb 20 23:54:38 1995 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2525 * Makefile.in (ALL_MACHINES): Add w65-dis.o.
2527 Thu Feb 16 17:34:41 1995 Ian Lance Taylor <ian@cygnus.com>
2529 * mips-opc.c: Add r4650 mul instruction.
2531 Wed Feb 15 15:45:20 1995 Ian Lance Taylor <ian@cygnus.com>
2533 * mips-opc.c: Add uld and usd macros for unaligned double load and
2536 Tue Feb 14 13:17:37 1995 Michael Meissner <meissner@tiktok.cygnus.com>
2538 * ppc-opc.c (powerpc_opcodes): Add 403GA opcodes rfci, dccci,
2539 mfdcr, mtdcr, icbt, iccci.
2541 Thu Feb 9 12:28:13 1995 Stan Shebs <shebs@andros.cygnus.com>
2543 * i960-dis.c (struct tabent, struct sparse_tabent): Change the
2544 signed char fields to shorts, more portable.
2546 Wed Feb 8 17:29:29 1995 Stan Shebs <shebs@andros.cygnus.com>
2548 * i960-dis.c (struct tabent, struct sparse_tabent): Declare the
2549 char fields as signed chars, since they may have negative values.
2551 Mon Feb 6 10:52:06 1995 J.T. Conklin <jtc@rtl.cygnus.com>
2553 * i386-dis.c (dis386_twobyte): Add cpuid, From Charles Hannum
2554 (mycroft@netbsd.org).
2556 Mon Jan 30 12:38:00 1995 Ian Lance Taylor <ian@cygnus.com>
2558 From "Logg, Ed" <elogg@ea.com>:
2559 * ppc-opc.c (extract_bdm): Correct parenthezisation.
2560 * ppc-dis.c (print_insn_powerpc): Print .long before unrecognized
2563 Thu Jan 26 18:32:08 1995 Ian Lance Taylor <ian@cygnus.com>
2565 * ppc-opc.c: Changes based on patch from David Edelsohn
2566 <edelsohn@mhpcc.edu>.
2567 (powerpc_operands): Add operands SPRBAT and SPRG. Split TBR out of
2570 (insert_tbr): New static function.
2571 (extract_tbr): New static function.
2572 (XFXFXM_MASK, XFXM): Define.
2573 (XSPRBAT_MASK, XSPRG_MASK): Define.
2574 (powerpc_opcodes): Add instructions to access special registers by
2575 name. Add mtcr and mftbu.
2577 Tue Jan 17 10:56:43 1995 Ian Lance Taylor <ian@sanguine.cygnus.com>
2579 * mips-opc.c (P3): Define.
2580 (mips_opcodes): Add mad and madu.
2582 Sun Jan 15 16:32:59 1995 Steve Chamberlain <sac@splat>
2584 * configure.in: Add W65 support.
2585 * disassemble.c: Likewise.
2586 * w65-opc.h, w65-dis.c: New files.
2588 Wed Dec 28 22:15:33 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2590 * h8300-dis.c (bfd_h8_disassemble): Add support for 2 bit
2593 Tue Dec 20 11:25:12 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2595 * mips-opc.c: Add dli as a synonym for li.
2597 Thu Dec 8 18:23:31 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2599 * alpha-dis.c (print_insn_alpha): Handle call_pal instruction, and
2600 print something for reserved opcode values, even if it won't
2603 * mips-dis.c (_print_insn_mips): When initializing, shift right
2604 and mask, to avoid sign extension problems on the Alpha.
2606 * m68k-dis.c (print_insn_arg, case 'J'): Handle buscr and pcr
2609 Wed Nov 23 22:34:51 1994 Steve Chamberlain (sac@jonny.cygnus.com)
2611 * sh-opc.h (mov.l gbr): Get direction right.
2612 * sh-dis.c (print_insn_shx): New function.
2613 (print_insn_shl, print_insn_sh): Call print_insn_shx to
2614 print opcodes with right byte order.
2616 Thu Nov 3 19:32:22 1994 Ken Raeburn <raeburn@cujo.cygnus.com>
2618 * ns32k-dis.c (struct ns32k_option): Renamed from struct option,
2619 to avoid conflicts with getopt.
2621 Mon Oct 31 18:48:10 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2623 * hppa-dis.c (print_insn_hppa): Read the instruction using
2624 bfd_getb32, so that it works on a little endian or 64 bit host.
2625 Remove unused local variable op.
2627 Tue Oct 25 17:07:57 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2629 * mips-opc.c: Use or instead of addu for pseudo-op move, since
2630 addu does not work correctly if -mips3.
2632 Wed Oct 19 13:40:16 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2634 * a29k-dis.c (print_special): Add special register names defined
2635 on 29030, 29040 and 29050.
2636 (print_insn): Handle new operand type 'I'.
2638 Wed Oct 12 11:59:55 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2640 * Makefile.in (INSTALL): Use top level install.sh script.
2642 Wed Oct 5 19:16:29 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2644 * sparc-dis.c: Rewrite to use bitfields, rather than a union, so
2645 that it works on a little endian host.
2647 Tue Oct 4 12:14:21 1994 Ian Lance Taylor <ian@sanguine.cygnus.com>
2649 * configure.in: Use ${config_shell} when running config.bfd.
2651 Wed Sep 21 18:49:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2653 * mips-opc.c (mips_opcodes): "dabs" is only available with -mips3.
2655 Thu Sep 15 16:30:22 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2657 * a29k-dis.c (print_insn): Print the opcode.
2659 Wed Sep 14 17:52:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2661 * mips-opc.c (mips_opcodes): Set WR_t for sc and scd.
2663 Sun Sep 11 22:32:17 1994 Jeff Law (law@snake.cs.utah.edu)
2665 * hppa-dis.c (reg_names): Use r26-r23 for arg0-arg3.
2667 Tue Sep 6 11:37:12 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2669 * mips-opc.c: Set INSN_STORE_MEMORY flag for all instructions
2670 which store a value into memory.
2672 Sun Sep 04 17:58:10 1994 Richard Earnshaw (rwe@pegasus.esprit.ec.org)
2674 * configure.in, Makefile.in, disassemble.c: Add support for the ARM.
2675 * arm-dis.c, arm-opc.h: New files.
2677 Fri Aug 5 14:00:05 1994 Stan Shebs (shebs@andros.cygnus.com)
2679 * Makefile.in (ns32k-dis.o): Add dependency.
2680 * ns32k-dis.c (print_insn_arg): Declare initialized local as
2681 string, not as array of chars.
2683 Thu Jul 28 18:14:16 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2685 * sparc-dis.c (print_insn_sparc): Handle new operand type 'x'.
2687 * sparc-opc.c: Added sparclite extended FP operations, and
2688 versions of v9 impdep* instructions permitting specification of
2691 Tue Jul 26 16:36:03 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2693 * i960-dis.c (reg_names): Now const.
2694 (struct sparse_tabent): New type, copied from array type in mem
2696 (ctrl): Local static array ctrl_tab now const.
2697 (cobr): Local static array cobr_tab now const.
2698 (mem): Local variables reg1, reg2, reg3 now point to const. Local
2699 static variable mem_tab no longer explicitly initialized. Changed
2700 mem_init to const array of struct sparse_tabent.
2701 (reg): Local static variable reg_tab no longer explicitly
2702 initialized. Changed reg_init to const array of struct
2704 (ea): Local static array scale_tab now const.
2706 * i960-dis.c (reg): Added i960JX instructions to reg_init table.
2709 Tue Jul 19 21:00:00 1994 DJ Delorie (dj@ctron.com)
2711 * configure.bat: the disassember needs to be enabled for
2712 "objdump -d" to work in djgpp.
2714 Wed Jul 13 18:01:58 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2716 * ns32k-dis.c: Deleted all code in "#ifdef GDB".
2717 (invalid_float): Enabled general version, doesn't require running
2718 on ns32k host. Changed to take char* argument, and test for
2719 explicitly specified sizes, instead of using sizeof() on host CPU
2721 (INVALID_FLOAT): Cast first argument.
2722 (opt_u, opt_U, opt_O, opt_C, opt_S, list_P532, list_M532,
2723 list_P032, list_M032): Now const.
2724 (optlist, list_search): Made appropriate arguments now point to
2726 (print_insn_arg): Changed static array of one-character-string
2727 pointers into a static const array of characters; fixed sprintf
2728 statement accordingly.
2730 Sun Jul 10 00:27:47 1994 Ian Dall (dall@hfrd.dsto.gov.au)
2732 * opcodes/ns32k-dis.c: Semi-new file. Had apparently been dropped
2733 from distribution. A ns32k-dis.c from a previous distribution has
2734 been brought up to date and supports the new interface.
2736 * disassemble.c: define ARCH_ns32k and add case bfd_arch_ns32k.
2738 * configure.in: add bfd_ns32k_arch target support.
2740 * Makefile.in: add ns32k-dis.o to ALL_MACHINES.
2741 Add ns32k-dis.c to CFILES. Add dependencies for ns32k-dis.o.
2743 Wed Jun 29 22:10:37 1994 Steve Chamberlain (sac@cygnus.com)
2745 * h8300-dis.c (bfd_h8_disassemble): Get 16bit branch
2748 Tue Jun 28 13:22:06 1994 Stan Shebs (shebs@andros.cygnus.com)
2750 * h8300-dis.c, mips-dis.c: Don't use true and false.
2752 Thu Jun 23 12:53:19 1994 David J. Mackenzie (djm@rtl.cygnus.com)
2754 * configure.in: Change --with-targets to --enable-targets.
2756 Wed Jun 22 13:38:32 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
2758 * mips-dis.c (_print_insn_mips): Build a static hash table mapping
2759 opcodes to the first instruction with that opcode, to speed
2760 disassembly of large files. From ralphc@pyramid.com (Ralph
2763 Tue Jun 7 12:49:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2765 * Makefile.in (mostlyclean): Fix typo (was mostyclean).
2767 Wed May 11 22:32:00 1994 DJ Delorie (dj@ctron.com)
2769 * configure.bat: update to latest makefile.in
2771 Sat May 7 17:13:21 1994 Steve Chamberlain (sac@cygnus.com)
2773 * a29k-dis.c (print_insn): Print 'x' type operand in hex.
2774 * h8300-dis.c (bfd_h8_disassemble): Print 16bit rels correctly.
2775 * sh-dis.c (print_insn_sh): Don't recur endlessly if delay
2776 slot insn is in a delay slot.
2777 * z8k-opc.h: (resflg): Fix patterns.
2778 * h8500-opc.h Fix CR insn patterns.
2780 Fri May 6 14:34:46 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2782 * ppc-opc.c (powerpc_opcodes): Put PowerPC versions of "cmp" and
2783 "cmpl" before POWER versions, so that gas -many uses them.
2785 Thu Apr 28 18:32:36 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
2787 * disassemble.c: New file.
2788 * Makefile.in (OFILES): Add disassemble.o.
2789 (disassemble.o): Provide dependencies; compile with $(ARCHDEFS).
2790 * configure.in: Define ARCHDEFS in Makefile. Code taken from
2791 binutils/configure.in.
2793 * m68k-dis.c (print_insn_m68k): If F_ALIAS flag is set, skip the
2794 opcode being examined.
2796 Thu Apr 21 17:08:40 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2798 * ppc-opc.c (powerpc_operands): Added RAL, RAM and RAS.
2799 (insert_ral, insert_ram, insert_ras): New functions.
2800 (powerpc_opcodes): Use RAL for load with update, RAM for lmw, and
2801 RAS for store with update.
2803 Sat Apr 16 23:41:44 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2805 * ppc-opc.c (powerpc_opcodes): Correct fcir. From David Edelsohn
2806 (edelsohn@npac.syr.edu).
2808 Wed Apr 6 17:11:45 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2810 * mips-opc.c (mips_opcodes): Correct operands of "nor" with an
2813 Mon Apr 4 16:30:46 1994 Doug Evans (dje@canuck.cygnus.com)
2815 * sparc-opc.c (sparc_opcodes): Fix "rd %fprs,%l0".
2817 Mon Apr 4 13:22:00 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2819 * ppc-opc.c (powerpc_operands): The signedp field has been
2820 removed, so don't initialize it. Set the PPC_OPERAND_SIGNED flag
2821 instead. Add new operand SISIGNOPT.
2822 (powerpc_opcodes): For lis, liu, addis, and cau use SISIGNOPT.
2823 Based on patch from David Edelsohn (edelsohn@npac.syr.edu).
2824 * ppc-dis.c (print_insn_powerpc): Check PPC_OPERAND_SIGNED rather
2827 Wed Mar 30 00:31:49 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2829 * i386-dis.c (struct private): Renamed to dis_private. `private'
2830 is a reserved word for dynix cc.
2832 Mon Mar 28 13:00:15 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2834 * configure.in: Change error message to refer to bfd/config.bfd
2835 rather than bfd/configure.in.
2837 Mon Mar 28 12:28:30 1994 David Edelsohn (edelsohn@npac.syr.edu)
2839 * ppc-opc.c: Define POWER2 as short alias flag.
2840 (powerpc_opcodes): Add POWER/2 opcodes lfq*, stfq*, fcir[z], and
2843 Wed Mar 23 12:23:05 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2845 * i960-dis.c (print_insn_i960): Don't read a second word for
2846 opcodes 0, 1, 2 and 3.
2848 Wed Mar 16 15:37:58 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2850 * configure.in: Don't build m68881-ext.o for bfd_m68k_arch.
2852 Mon Mar 14 14:53:50 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2854 * m68881-ext.c: Removed; no longer used.
2855 * Makefile.in: Changed accordingly.
2857 * m68k-dis.c (ext_format_68881): Don't declare.
2858 (print_insn_m68k): If an instruction uses place 'i', it uses at
2859 least four fixed bytes.
2860 (print_insn_arg): Don't bump p by 2 for case 'I', place 'i'. For
2861 extended float, convert to double using floatformat_to_double, not
2862 ieee_extended_to_double, and fetch the data before converting it.
2864 Tue Mar 8 18:12:25 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2866 * mips-opc.c: It's sqrt.s, not sqrt.w. From
2867 davidj@ICSI.Berkeley.EDU (David Johnson).
2869 Tue Feb 8 16:55:27 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2871 * ppc-opc.c (powerpc_opcodes): The POWER uses bdn[l][a] where the
2872 PowerPC uses bdnz[l][a].
2874 Tue Feb 8 00:32:28 1994 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2876 * dis-buf.c, i386-dis.c: Include sysdep.h.
2878 Mon Feb 7 19:22:23 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2880 * configure.in (bfd_powerpc_arch): Use ppc-dis.o and ppc-opc.o.
2882 * ppc-opc.c (powerpc_opcodes): Mark POWER instructions supported
2883 by Motorola PowerPC 601 with PPC_OPCODE_601.
2884 * ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc):
2885 Disassemble Motorola PowerPC 601 instructions as well as normal
2886 PowerPC instructions.
2888 Sun Feb 6 07:45:17 1994 Jim Kingdon (kingdon@lioth.cygnus.com)
2890 * i960-dis.c (reg, mem): Just use a static array instead of
2893 Sat Feb 5 00:04:02 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2895 * hppa-dis.c (print_insn_hppa): For '?' and '@' only adjust the
2896 condition name index if this is for a negated condition.
2898 * hppa-dis.c (print_insn_hppa): No space before 'H' operand.
2899 Floating point format for 'H' operand is backwards from normal
2900 case (0 == double, 1 == single). For '4', '6', '7', '9', and '8'
2901 operands (fmpyadd and fmpysub), handle bizarre register
2902 translation correctly for single precision format.
2904 * hppa-dis.c (print_insn_hppa): Do not emit a space after 'F'
2905 or 'I' operands if the next format specifier is 'M' (fcmp
2906 condition completer).
2908 Feb 4 23:38:03 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2910 * ppc-opc.c (powerpc_operands): New operand type MBE to handle a
2911 single number giving a bitmask for the MB and ME fields of an M
2912 form instruction. Change NB to accept 32, and turn it into 0;
2913 also turn 0 into 32 when disassembling. Seperated SH from NB.
2914 (insert_mbe, extract_mbe): New functions.
2915 (insert_nb, extract_nb): New functions.
2916 (SC_MASK): Mask out SA and LK bits.
2917 (powerpc_opcodes): Change "cal" to use RT, D, RA rather than RT,
2918 RA, SI. Change "liu" and "cau" to use UI rather than SI. Mark
2919 "bctr" and "bctrl" as accepted by POWER. Change "rlwimi",
2920 "rlimi", "rlwimi.", "rlimi.", "rlwinm", "rlinm", "rlwinm.",
2921 "rlinm.", "rlmi", "rlmi.", "rlwnm", "rlnm", "rlwnm.", "rlnm." to
2922 use MBE rather than MB. Add "mfmq" and "mtmq" POWER instructions.
2923 (powerpc_macros): Define table of macro definitions.
2924 (powerpc_num_macros): Define.
2926 * ppc-dis.c (print_insn_powerpc): Don't skip optional operands
2927 if PPC_OPERAND_NEXT is set.
2929 Sat Jan 22 23:10:07 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2931 * i960-dis.c (print_insn_i960): Make buffer bfd_byte instead of
2932 char. Retrieve contents using bfd_getl32 instead of shifting.
2934 Fri Jan 21 19:01:39 1994 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2936 * ppc-opc.c: New file. Opcode table for PowerPC, including
2937 opcodes for POWER (RS/6000).
2938 * ppc-dis.c: New file. PowerPC and Power (RS/6000) disassembler.
2939 * Makefile.in (ALL_MACHINES): Add ppc-dis.o and ppc-opc.o.
2940 (CFILES): Add ppc-dis.c.
2941 (ppc-dis.o, ppc-opc.o): New targets.
2942 * configure.in: Build ppc-dis.o and ppc-opc.o for bfd_rs6000_arch.
2944 Mon Jan 17 20:05:49 1994 Jeffrey A. Law (law@snake.cs.utah.edu)
2946 * hppa-dis.c (print_insn_hppa): Handle 'N' in assembler template.
2947 No space before 'u', 'f', or 'N'.
2949 Sun Jan 16 14:20:16 1994 Jim Kingdon (kingdon@deneb.cygnus.com)
2951 * i386-dis.c (print_insn_i386): Add FIXME comment regarding reading
2952 farther than we should.
2954 * i386-dis.c (dis386): Use Yb and Yv for scasb and scasS.
2956 Thu Jan 6 12:38:05 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2958 * sparc-dis.c m68k-dis.c alpha-dis.c a29k-dis.c: Fix comments.
2960 Wed Jan 5 11:56:21 1994 David J. Mackenzie (djm@thepub.cygnus.com)
2962 * i960-dis.c (print_insn_i960): Only read word2 if the instruction
2963 needs it, to prevent reading past the end of a section.
2965 Wed Nov 17 17:20:12 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2967 * mips-opc.h: Use macro for j instruction, to support SVR4 PIC.
2968 Removed t,A case for la; always use t,A(b) case.
2970 Mon Nov 8 12:37:36 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2972 From Ted Lemen <mellon@pepper.ncd.com>
2973 * mips-dis.c (print_insn_arg): Handle 'k'.
2974 * mips-opc.c: Make cache use k, not t.
2976 Sun Nov 7 23:52:34 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
2978 * alpha-opc.h, alpha-dis.c (print_insn_alpha): Add
2979 FLOAT_MEMORY_FORMAT_CODE, FLOAT_BRANCH_FORMAT_CODE, correct
2980 FLOAT_FORMAT_CODE to put out floating point register names.
2982 Mon Nov 1 18:17:51 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2984 * mips-opc.c: Use macros for jal variants, to support SVR4 PIC.
2986 Thu Oct 28 17:42:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2988 * a29k-dis.c (print_insn): Use 0x%08x, not 0x%8x.
2990 Wed Oct 27 11:48:01 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
2992 * mips-opc.c (dsll, dsra, dsrl): Added '>' cases for shift counts
2993 larger than 32. Moved dsxx32 variants first for disassembler.
2995 Mon Oct 25 11:33:14 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
2997 * z8kgen.c, z8k-opc.h: Add full lda information.
2999 Tue Oct 19 12:39:25 1993 Jeffrey A Law (law@cs.utah.edu)
3001 * hppa-dis.c (print_insn_hppa): Do not emit a space after
3002 movb instructions. Any necessary space will be emitted by
3003 the code to handle nullification completers.
3005 Wed Oct 13 16:19:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3007 * mips-opc.c: Moved l.d down so that it disassembles as ldc1.
3009 Fri Oct 8 02:34:21 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3011 * alpha-opc.h: Add ldl_l, fix typo for ldq_u.
3012 * alpha-dis.c (print_insn_alpha): Add code for PAL_FORMAT_CODE.
3014 Tue Oct 5 17:47:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3016 * mips-opc.c: Correct lwu opcode value (book had it wrong).
3018 Thu Sep 30 11:26:18 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3020 * z8k-dis.c (FETCH_DATA): get just the right amount of data.
3021 (unpack_instr): Cope with ARG_IMM4M1 type instructions.
3023 Wed Sep 29 16:24:49 1993 K. Richard Pixley (rich@sendai.cygnus.com)
3025 * m88k-dis.c (m88kdis): comment change. Remove space after
3027 (printop): handle new arg types DEC and XREG for m88110.
3029 Tue Sep 28 19:20:16 1993 Jeffrey A Law (law@snake.cs.utah.edu)
3031 * hppa-dis.c (print_insn_hppa): Handle 'z' operand
3032 type for absolute branch addresses. Delete special
3033 "ble" and "be" code in 'W' operand code.
3035 Fri Sep 24 14:08:33 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3037 * mips-opc.c: Set hazard information correctly for branch
3038 likely instructions.
3040 Fri Sep 17 04:41:17 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3042 * alpha-dis.c (print_insn_alpha), alpha-opc.h: Fix bugs, use
3043 info->fprintf_func for printing and info->print_address_func for
3046 Wed Sep 15 12:12:07 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3048 * mips-opc.c: Set INSN_TRAP for tXX instructions.
3050 Thu Sep 9 10:11:27 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3052 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson):
3053 Corrected second case of "b" for disassembler.
3055 Tue Sep 7 14:25:15 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3057 * mips-dis.c, m88k-dis.c: Don't include libbfd.h. Changed calls
3058 to BFD swapping routines to correspond to BFD name changes.
3060 Thu Sep 2 10:35:25 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3062 * mips-opc.c: Change div machine instruction to be z,s,t rather
3063 than s,t. Change div macro to be d,v,t rather than d,s,t.
3064 Likewise for divu, ddiv, ddivu. Added z,s,t case for drem, dremu,
3065 rem and remu which generates only the corresponding div
3066 instruction. This is for compatibility with the MIPS assembler,
3067 which only generates the simple machine instruction when an
3068 explicit destination of $0 is used.
3069 * mips-dis.c (print_insn_arg): Handle 'z' (always register zero).
3071 Thu Aug 26 17:41:44 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3073 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Set
3074 WR_31 hazard for bal, bgezal, bltzal.
3076 Thu Aug 26 17:20:02 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3078 * hppa-dis.c (print_insn_hppa): Use print function
3079 from within the disassemble_info, not fprintf_filtered.
3081 Wed Aug 25 13:51:40 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3083 * hppa-dis.c (print_insn_hppa): Handle '|' like '>'. (From Jeff
3084 Law, law@cs.utah.edu.)
3086 Mon Aug 23 12:44:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3088 * mips-opc.c ("absu"): Removed.
3091 Fri Aug 20 10:52:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3093 * mips-opc.c: Added r6000 and r4000 instructions and macros.
3094 Changed hazard information to distinguish between memory load
3095 delays and coprocessor load delays.
3097 Wed Aug 18 15:39:23 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3099 * mips-opc.c: li.d uses "T,L", not "S,F". Added li.s.
3101 Tue Aug 17 09:44:42 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3103 * configure.in: Don't pass cpu to config.bfd.
3105 Tue Aug 17 12:23:52 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3107 * m88k-dis.c (m88kdis): Make class unsigned.
3109 Thu Aug 12 15:08:18 1993 Ian Lance Taylor (ian@cygnus.com)
3111 * alpha-dis.c (print_insn_alpha): One branch format case was
3112 missing the instruction name.
3114 Wed Aug 11 19:29:39 1993 David J. Mackenzie (djm@thepub.cygnus.com)
3116 * Makefile.in (ALL_MACHINES): Renamed from DIS_LIBS.
3117 Add the arch-specific auxiliary files.
3118 (OFILES): Remove the arch-specific auxiliary files
3119 and use BFD_MACHINES instead of DIS_LIBS.
3120 * configure.in: Set BFD_MACHINES based on --with-targets option.
3122 Thu Aug 12 12:04:53 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3124 * mips-opc.c: Added lwc1 E,A(b) to go with lwc1 T,A(b). Similarly
3127 Sun Aug 8 15:09:30 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3129 * sparc-opc.c: Change CONST to const to deal with gcc
3130 -Dconst=__const -traditional.
3132 Fri Aug 6 10:58:55 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3134 * mips-opc.c: From davidj@ICSI.Berkeley.EDU (David Johnson): Took
3135 coprocessor instructions out of #if 0, and made them use new
3138 Thu Aug 5 17:11:06 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3140 * sparc-dis.c: Include ansidecl.h before opcodes/sparc.h.
3142 Fri Jul 30 18:48:15 1993 John Gilmore (gnu@cygnus.com)
3144 * sparc-opc.c: Add F_JSR, F_UNBR, or F_CONDBR flags to each branch
3145 instruction, for use by the disassembler.
3147 * sparc-dis.c (SEX): Add sign extension macro. Replace many
3148 hand-coded sign extensions that depended on 32-bit host ints.
3149 FIXME, we still depend on big-endian host bitfield ordering.
3150 (sparc_print_insn): Set the insn_info_valid field, and the
3151 other fields that describe the instruction being printed.
3153 Tue Jul 27 17:04:58 1993 Jim Wilson (wilson@sphagnum.cygnus.com)
3155 * sparc-opc.c (call): Accept all 6 addressing modes valid for
3156 `jmp' instead of just one of them.
3158 Wed Jul 21 11:43:32 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3160 * hppa-dis.c: Move floating registers from reg_names to fp_reg_names.
3161 (fput_fp_reg_r): Renamed from fput_reg_r.
3162 (fput_fp_reg): New function.
3163 (print_insn_hppa): Use fput_fp_reg{,_r} where appropriate.
3165 * hppa-dis.c (print_insn_hppa, cases 'a', 'd'): Print space afterwards.
3167 * hppa-dis.c (print_insn_hppa, case 'd'): Use GET_COND not GET_FIELD.
3169 Mon Jul 19 13:52:21 1993 Jim Kingdon (kingdon@deneb.cygnus.com)
3171 * hppa-dis.c (print_insn_hppa): Use extract_5r_store for 'r'.
3173 * hppa-dis.c (print_insn_hppa, case '>'): If next character is 'n',
3174 don't output a space.
3176 * hppa-dis.c (float_format_names): 10 is undefined, and 11 is quad.
3178 Sun Jul 18 16:30:02 1993 Jim Kingdon (kingdon@rtl.cygnus.com)
3180 * mips-opc.c: New file, containing opcode table from
3181 ../include/opcode/mips.h.
3182 * Makefile.in: Add it.
3184 Thu Jul 15 12:37:05 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3186 * m88k-dis.c: New file, moved in from gdb and changed to use the
3187 new dis-asm.h disassembler interface.
3188 * Makefile.in (DIS_LIBS): Added m88k-dis.o.
3189 (m88k-dis.o): New target.
3191 Tue Jul 13 10:04:16 1993 Ian Lance Taylor (ian@cygnus.com)
3193 * mips-dis.c (print_insn_arg, _print_insn_mips): Made pointer to
3194 argument string const char * to correspond to opcode/mips.h.
3196 Tue Jul 6 15:18:37 1993 Ian Lance Taylor (ian@cygnus.com)
3198 * mips-dis.c: Updated to account for name changes in new version
3200 * Makefile.in: Added header file dependencies.
3202 Sat Jul 3 23:47:56 1993 Doug Evans (dje@canuck.cygnus.com)
3204 * h8300-dis.c (bfd_h8_disassemble): Correct fetching of instruction.
3206 Thu Jul 1 12:23:38 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3208 * m68k-dis.c (NEXTWORD, NEXTLONG): Use ((x) ^ 0x8000) - 0x8000 to sign
3209 extend, rather than shifts.
3211 Sun Jun 20 20:56:56 1993 Ken Raeburn (raeburn@poseidon.cygnus.com)
3213 * Makefile.in: Undo 15 June change.
3215 Fri Jun 18 14:15:15 1993 Per Bothner (bothner@deneb.cygnus.com)
3217 * m68k-dis.c (print_insn_arg): Change return value to byte count
3219 * m68k-dis.c: Re-write to detect invalid operands before
3220 printing anything, so we can handle this the same way we
3221 handle invalid opcodes.
3223 Thu Jun 17 15:01:36 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3225 * sh-dis.c, sh-opc.h: Understand some more opcodes.
3227 Wed Jun 16 13:48:05 1993 Ian Lance Taylor (ian@cygnus.com)
3229 * hppa-dis.c: Include <ansidecl.h> and sysdep.h before other
3232 Tue Jun 15 21:45:26 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3234 * sparc-dis.c: Don't declare qsort, since sysdep.h might.
3236 * configure.in: Do make sysdep.h link.
3237 * Makefile.in: Search ../include. Don't search ../bfd.
3239 Tue Jun 15 13:36:10 1993 Stu Grossman (grossman@cygnus.com)
3241 Changes from Jeff Law, law@cs.utah.edu:
3242 * hppa-dis.c: Fix typo. 'a' and 'd' were reversed.
3243 Do not print a space before the completers specified by
3246 Fri Jun 11 18:40:21 1993 Ken Raeburn (raeburn@cygnus.com)
3248 * mips-dis.c: No longer need to bomb out if HOST_64_BIT is
3249 defined, since gdb has been fixed.
3251 Changes from Jeff Law, law@cs.utah.edu:
3252 * hppa-dis.c (print_insn_hppa): Last argument to fput_reg,
3253 fput_reg_r, fput_creg, fput_const, and fputs_filtered should
3254 be a *disassemble_info, not a *FILE.
3255 * hppa-dis.c: Support 'd', '!', and 'a'.
3256 * hppa-dis.c: Support 's' to extract a 2 bit space register.
3257 * hppa-dis.c: Delete cases which are no longer needed.
3259 Fri Jun 11 07:53:48 1993 Jim Kingdon (kingdon@cygnus.com)
3261 * m68k-dis.c (print_insn_{m68k,arg}): Add MMU codes.
3263 Tue Jun 8 12:25:01 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
3265 * h8300-dis.c: New file, removed from bfd/cpu-h8300.c, with
3268 Mon Jun 7 12:58:49 1993 Per Bothner (bothner@rtl.cygnus.com)
3270 * Makefile.in (CSEARCH): Add -I../bfd for sysdep.h and bfd.h.
3271 * configure.in: No longer need to configure to get sysdep.h.
3273 Thu Jun 3 15:56:49 1993 Stu Grossman (grossman@cygnus.com)
3275 * Patches from Jeffrey Law <law@cs.utah.edu>.
3276 * hppa-dis.c: Support 'I', 'J', and 'K' in output
3277 templates for 1.1 FP computational instructions.
3279 Tue May 25 13:05:48 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3281 * h8500-dis.c (print_insn_h8500): Address argument is type
3283 * z8k-dis.c (print_insn_z8k, print_insn_z8001, print_insn_z8002):
3286 * h8500-opc.h (addr_class_type): No comma at end of enumerator.
3287 * sh-opc.h (sh_nibble_type, sh_arg_type): Ditto.
3289 * sparc-dis.c (compare_opcodes): Move static declaration to
3292 Fri May 21 14:17:37 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3294 * sparc-dis.c (print_insn_sparc): Implement 'n' argument for unimp
3295 instruction, remove unimp hack from 'l' argument.
3297 Wed May 19 15:35:54 1993 Stu Grossman (grossman@cygnus.com)
3299 * z8k-dis.c (fetch_data): Use unsigned char to make ancient gcc's
3302 Fri May 14 15:22:46 1993 Ian Lance Taylor (ian@cygnus.com)
3304 * Based on patches from davidj@ICSI.Berkeley.EDU (David Johnson):
3305 * mips-dis.c (print_insn_arg): Handle 'C' for general coprocessor
3308 Fri May 14 00:09:14 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3310 * hppa-dis.c: Include dis-asm.h before sysdep.h. Changed some
3311 arrays of string pointers to 2-d arrays of chars, to save
3314 Thu May 6 20:51:17 1993 Fred Fish (fnf@cygnus.com)
3316 * a29k-dis.c, alpha-dis.c, i960-dis.c, sparc-dis.c, z8k-dis.c:
3317 Cast second arg to read_memory_func to "bfd_byte *", as necessary.
3319 Tue May 4 20:31:10 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3321 * hppa-dis.c: New file from Utah, adapted to new disassembler
3323 * Makefile.in: Include it.
3325 Mon Apr 26 18:17:42 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3327 * sh-dis.c, sh-opc.h: New files.
3329 Fri Apr 23 18:51:22 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3331 * alpha-dis.c, alpha-opc.h: New files.
3333 Tue Apr 6 12:54:08 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
3335 * mips-dis.c: Sign extend 'j' and 'b' arguments, delta is a signed
3338 Mon Apr 5 17:37:37 1993 John Gilmore (gnu@cygnus.com)
3340 * sparc-dis.c: Make "ta" the default trap instruction, "t" the alias.
3342 Fri Apr 2 07:24:27 1993 Ian Lance Taylor (ian@cygnus.com)
3344 * a29k-dis.c, sparc-dis.c, sparc-opc.c: Use CONST rather than
3347 Thu Apr 1 11:20:43 1993 Jim Kingdon (kingdon@cygnus.com)
3349 * sparc-dis.c: Use fprintf_func a few places where I forgot,
3350 and double percent signs a few places.
3352 * a29k-dis.c, i960-dis.c: New, merged from gdb and binutils.
3354 * i386-dis.c, m68k-dis.c, mips-dis.c, sparc-dis.c:
3355 Use info->print_address_func not print_address.
3357 * dis-buf.c (generic_print_address): New function.
3359 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3361 * Makefile.in: Add sparc-dis.c.
3362 sparc-dis.c: New file, merges binutils and gdb versions as follows:
3364 Add `add' instruction to the set that get checked
3365 for a preceding `sethi' in order to print an absolute address.
3366 * (print_insn): Disassembly prefers real instructions.
3367 (is_delayed_branch): Speed up.
3368 * sparc-opcode.h: Add ALIAS bit to aliases. Fix up opcode tables.
3369 Still missing some float ops, and needs testing.
3370 * sparc-pinsn.c (print_insn): Eliminate 'set' test, subsumed by
3371 F_ALIAS. Use printf, not fprintf, when not passing a file
3373 (compare_opcodes): Check that identical instructions have
3374 identical opcodes, complain otherwise.
3377 * Include reg_names.
3379 Use dis-asm.h/read_memory_func interface.
3381 Wed Mar 31 20:49:06 1993 K. Richard Pixley (rich@rtl.cygnus.com)
3383 * h8500-dis.c, i386-dis.c, m68k-dis.c, z8k-dis.c (fetch_data):
3384 deliberately return non-zero to setjmp from longjmp. Otherwise
3385 this code fails to compile.
3387 Wed Mar 31 17:04:31 1993 Stu Grossman (grossman@cygnus.com)
3389 * m68k-dis.c: Fix prototype for fetch_arg().
3391 Wed Mar 31 10:07:04 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
3393 * dis-buf.c: New file, for new read_memory_func interface.
3394 Makefile.in (OFILES): Include it.
3395 m68k-dis.c, i386-dis.c, h8500-dis.c, mips-dis.c, z8k-dis.c:
3396 Use new read_memory_func interface.
3398 Mon Mar 29 14:02:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3400 * h8500-dis.c (print_insn_h8500): Get sign of fp offsets right.
3401 * h8500-opc.h: Fix couple of opcodes.
3403 Wed Mar 24 02:03:36 1993 david d `zoo' zuhn (zoo at poseidon.cygnus.com)
3405 * Makefile.in: add dvi & installcheck targets
3407 Mon Mar 22 18:55:04 1993 John Gilmore (gnu@cygnus.com)
3409 * Makefile.in: Update for h8500-dis.c.
3411 Fri Mar 19 14:27:17 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3413 * h8500-dis.c, h8500-opc.h: New files
3415 Thu Mar 18 14:12:37 1993 Per Bothner (bothner@rtl.cygnus.com)
3417 * mips-dis.c, z8k-dis.c: Converted to use interface defined in
3418 ../include/dis-asm.h.
3419 * m68k-dis.c: New file (merge of ../binutils/m68k-pinsn.c
3420 and ../gdb/m68k-pinsn.c).
3421 * i386-dis.c: New file (merge of ../binutils/i386-pinsn.c
3422 and ../gdb/i386-pinsn.c).
3423 * m68881-ext.c: New file. Moved definition of
3424 ext_format ext_format_68881 from ../gdb/m68k-tdep.c.
3425 * Makefile.in: Adjust for new files.
3426 * i386-dis.c: Patches from John Hassey (hassey@dg-rtp.dg.com).
3427 * m68k-dis.c: Recognize '9' placement code, so (say) pflush
3428 can be dis-assembled.
3430 Wed Feb 17 09:19:47 1993 Ken Raeburn (raeburn@cambridge.cygnus.com)
3432 * mips-dis.c (print_insn_arg): Now returns void.
3434 Mon Jan 11 16:09:16 1993 Fred Fish (fnf@cygnus.com)
3436 * mips-dis.c (ansidecl.h): Include for benefit of sysdep.h
3437 files that use the macros.
3439 Thu Jan 7 13:15:17 1993 Ian Lance Taylor (ian@tweedledumb.cygnus.com)
3441 * mips-dis.c: New file, from gdb/mips-pinsn.c.
3442 * Makefile.in (DIS_LIBS): Added mips-dis.o.
3443 (CFILES): Added mips-dis.c.
3445 Thu Jan 7 07:36:33 1993 Steve Chamberlain (sac@thepub.cygnus.com)
3447 * z8k-dis.c (print_insn_z8001, print_insn_z8002): new routines
3448 * z8kgen.c, z8k-opc.h: fix sizes of some shifts.
3450 Tue Dec 22 15:42:44 1992 Per Bothner (bothner@rtl.cygnus.com)
3452 * Makefile.in: Improve *clean rules.
3453 * configure.in: Allow a default host.
3455 Tue Nov 17 19:53:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3457 * Makefile.in: also use -I$(srcdir)/../bfd, since some sysdep
3458 files include other sysdep files
3460 Thu Nov 12 16:10:37 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3462 * z8k-dis.c z8k-opc.h z8kgen.c: checkpoint
3464 Fri Oct 9 04:56:05 1992 John Gilmore (gnu@cygnus.com)
3466 * configure.in: For host support, use ../bfd/configure.host
3467 so it stays in sync with the ../bfd/hosts database.
3469 Thu Oct 1 23:38:54 1992 david d `zoo' zuhn (zoo at cirdan.cygnus.com)
3471 * configure.in: use cpu-vendor-os triple instead of nested cases
3473 Wed Sep 30 16:09:20 1992 Michael Werner (mtw@cygnus.com)
3475 * z8k-dis.c (unparse_instr): fix bug where opcode returned was
3476 *always* the wrong one.
3478 Wed Sep 30 07:42:17 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3480 * z8kgen.c: added copyright info
3482 Tue Sep 29 12:20:21 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3484 * z8k-dis.c (unparse_instr): prettier tabs
3485 * z8kgen.c -> z8k-opc.h: bug fixes in tables
3487 Fri Sep 25 12:50:32 1992 Stu Grossman (grossman at cygnus.com)
3489 * configure.in: Add ncr* configuration.
3490 * z8k-dis.c (struct instr_data_s): Make instr_asmsrc char to make
3491 picayune ANSI compilers happy.
3493 Sep 20 08:50:55 1992 Fred Fish (fnf@cygnus.com)
3495 * configure.in (i386): Make i386 and i486 synonymous for now.
3496 * configure.in (i[34]86-*-sysv4): Add my_host definition.
3498 Fri Sep 18 17:01:23 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3500 * Makefile.in (install): Fix typo.
3502 Fri Sep 18 02:04:24 1992 John Gilmore (gnu@cygnus.com)
3504 * Makefile.in (make): Remove obsolete crud.
3505 (sparc-opc.o): Avoid Sun Make VPATH bug.
3507 Tue Sep 8 17:29:27 1992 K. Richard Pixley (rich@sendai.cygnus.com)
3509 * Makefile.in: since there are no SUBDIRS, remove rule and
3510 references of subdir_do.
3512 Tue Sep 8 17:02:58 1992 Ken Raeburn (raeburn@cambridge.cygnus.com)
3514 * Makefile.in (install): Get the library name right here too.
3515 Don't install bfd.h, since it's unrelated to this library. No
3516 subdirs to recurse into, either.
3517 (CFILES): The source file has a .c suffix, not .o.
3519 * sparc-opc.c: New file, moved from BFD.
3520 * Makefile.in (OFILES): Build it.
3522 Thu Sep 3 16:59:20 1992 Michael Werner (mtw@cygnus.com)
3524 * z8k-dis.c: fixed forward refferences of some declarations.
3526 Mon Aug 31 16:09:45 1992 Michael Werner (mtw@cygnus.com)
3528 * Makefile.in: get the name of the library right
3530 Mon Aug 31 13:47:35 1992 Steve Chamberlain (sac@thepub.cygnus.com)
3532 * z8k-dis.c: knows how to disassemble z8k stuff
3533 * z8k-opc.h: new file full of z8000 opcodes
3537 version-control: never
projects / platform / upstream / binutils.git / blob